NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	1–30 of 732 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 >>

List View

Citations

Details

	Records
	Author	Xu, W.; Buelens, L.C.; Galvita, V.V.; Bogaerts, A.; Meynen, V.
	Title	Improving the performance of gliding arc plasma-catalytic dry reforming via a new post-plasma tubular catalyst bed			Type	A1 Journal Article
	Year	2024	Publication	Journal of CO2 Utilization	Abbreviated Journal	Journal of CO2 Utilization
	Volume	83	Issue		Pages	102820
	Keywords	A1 Journal Article; Dry reforming Gliding arc plasma Plasma catalytic DRM Ni-based mixed oxide Post-plasma catalysis; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	A combination of a gliding arc plasmatron (GAP) reactor and a newly designed tubular catalyst bed (N-bed) was applied to investigate the post-plasma catalytic (PPC) effect for dry reforming of methane (DRM). As comparison, a traditional plasma catalyst bed (T-bed) was also utilized. The post-plasma catalytic effect of a Ni-based mixed oxide (Ni/MO) catalyst with a thermal catalytic performance of 77% CO2 and 86% CH4 conversion at 700 ℃ was studied. Although applying the T-bed had little effect on plasma based CO2 and CH4 conversion, an increase in selectivity to H2 was obtained with a maximum value of 89% at a distance of 2 cm. However, even when only α-Al2O3 packing material was used in the N-bed configuration, compared to the plasma alone and the T-bed, an increase of the CO2 and CH4 conversion from 53% and 53% to 69% and 69% to 83% was achieved. Addition of the Ni/MO catalyst further enhanced the DRM reaction, resulting in conversions of 79% for CO2 and 91% for CH4. Hence, although no insulation nor external heating was applied to the N-bed post plasma, it provides a slightly better conversion than the thermal catalytic performance with the same catalyst, while being fully electrically driven. In addition, an enhanced CO selectivity to 96% was obtained and the energy cost was reduced from ~ 6 kJ/L (plasma alone) to 4.3 kJ/L. To our knowledge, it is the first time that a post-plasma catalytic system achieves this excellent catalytic performance for DRM without extra external heating or insulation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	2024-05-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2212-9820	ISBN		Additional Links
	Impact Factor	7.7	Times cited		Open Access
	Notes	Wencong Xu, Vladimir V. Galvita, Annemie Bogaerts, and Vera Meynen would like to acknowledge the VLAIO Catalisti Moonshot project D2M and the VLAIO Catalisti transition project CO2PERATE (HBC.2017.0692). Lukas C. Buelens acknowledges financial support from the Fund for Scientific Research Flanders (FWO Flanders) through a postdoctoral fellowship grant 12E5623N. Vladimir V. Galvita also acknowledges a personal grant from the Research Fund of Ghent University (BOF; 01N16319).			Approved	Most recent IF: 7.7; 2024 IF: 4.292
	Call Number	PLASMANT @ plasmant @			Serial	9131
Permanent link to this record



	Author	Maerivoet, S.; Tsonev, I.; Slaets, J.; Reniers, F.; Bogaerts, A.
	Title	Coupled multi-dimensional modelling of warm plasmas: Application and validation for an atmospheric pressure glow discharge in CO2/CH4/O2			Type	A1 Journal Article
	Year	2024	Publication	Chemical Engineering Journal	Abbreviated Journal	Chemical Engineering Journal
	Volume	492	Issue		Pages	152006
	Keywords	A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	To support experimental research into gas conversion by warm plasmas, models should be developed to explain the experimental observations. These models need to describe all physical and chemical plasma properties in a coupled way. In this paper, we present a modelling approach to solve the complete set of assumed relevant equations, including gas flow, heat balance and species transport, coupled with a rather extensive chemistry set, consisting of 21 species, obtained by reduction of a more detailed chemistry set, consisting of 41 species. We apply this model to study the combined CO2 and CH4 conversion in the presence of O2, in a direct current atmospheric pressure glow discharge. Our model can predict the experimental trends, and can explain why higher O2 fractions result in higher CH4 conversion, namely due to the higher gas temperature, rather than just by additional chemical reactions. Indeed, our model predicts that when more O2 is added, the energy required to reach any set temperature (i.e., the enthalpy) drops, allowing the system to reach higher temperatures with similar amounts of energy. This is in turn related to the higher H2O fraction and lower H2 fraction formed in the plasma, as demonstrated by our model. Altogether, our new self-consistent model can capture the main physics and chemistry occurring in this warm plasma, which is an important step towards predictive modelling for plasma-based gas conversion.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	2024-05-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947	ISBN		Additional Links
	Impact Factor	15.1	Times cited		Open Access
	Notes	This research was supported by the Excellence of Science FWO-FNRS project (FWO grant ID G0I1822N; EOS ID 40007511) and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 810182–SCOPE ERC Synergy project, and grant agreement No. 101081162–PREPARE ERC Proof of Concept project). computational resources and services used in this work were provided by the HPC core facility CalcUA of the Universiteit Antwerpen, and VSC (Flemish Supercomputer Center), funded by the Research Foundation – Flanders (FWO) and the Flemish Government.			Approved	Most recent IF: 15.1; 2024 IF: 6.216
	Call Number	PLASMANT @ plasmant @			Serial	9132
Permanent link to this record



	Author	Long, Y.; Wang, X.; Zhang, H.; Wang, K.; Ong, W.-L.; Bogaerts, A.; Li, K.; Lu, C.; Li, X.; Yan, J.; Tu, X.; Zhang, H.
	Title	Plasma chemical looping : unlocking high-efficiency CO₂ conversion to clean CO at mild temperatures			Type	A1 Journal article
	Year	2024	Publication	JACS Au	Abbreviated Journal
	Volume		Issue		Pages
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	We propose a plasma chemical looping CO2 splitting (PCLCS) approach that enables highly efficient CO2 conversion into O-2-free CO at mild temperatures. PCLCS achieves an impressive 84% CO2 conversion and a 1.3 mmol g(-1) CO yield, with no O-2 detected. Crucially, this strategy significantly lowers the temperature required for conventional chemical looping processes from 650 to 1000 degrees C to only 320 degrees C, demonstrating a robust synergy between plasma and the Ce0.7Zr0.3O2 oxygen carrier (OC). Systematic experiments and density functional theory (DFT) calculations unveil the pivotal role of plasma in activating and partially decomposing CO2, yielding a mixture of CO, O-2/O, and electronically/vibrationally excited CO2. Notably, these excited CO2 species then efficiently decompose over the oxygen vacancies of the OCs, with a substantially reduced activation barrier (0.86 eV) compared to ground-state CO2 (1.63 eV), contributing to the synergy. This work offers a promising and energy-efficient pathway for producing O-2-free CO from inert CO2 through the tailored interplay of plasma and OCs.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001225139200001	Publication Date	2024-05-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:205970			Serial	9166
Permanent link to this record



	Author	Osorio-Tejada, J.; Escriba-Gelonch, M.; Vertongen, R.; Bogaerts, A.; Hessel, V.
	Title	CO₂ conversion to CO via plasma and electrolysis : a techno-economic and energy cost analysis			Type	A1 Journal article
	Year	2024	Publication	Energy & environmental science	Abbreviated Journal
	Volume		Issue		Pages
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Electrification and carbon capture technologies are essential for achieving net-zero emissions in the chemical sector. A crucial strategy involves converting captured CO2 into CO, a valuable chemical feedstock. This study evaluates the feasibility of two innovative methods: plasma activation and electrolysis, using clean electricity and captured CO2. Specifically, it compares a gliding arc plasma reactor with an embedded novel carbon bed system to a modern zero-gap type low-temperature electrolyser. The plasma method stood out with an energy cost of 19.5 GJ per tonne CO, marking a 43% reduction compared to electrolysis and conventional methods. CO production costs for plasma- and electrolysis-based plants were $671 and $962 per tonne, respectively. However, due to high uncertainty regarding electrolyser costs, the CO production costs in electrolysis-based plants may actually range from $570 to $1392 per tonne. The carbon bed system in the plasma method was a key factor in facilitating additional CO generation from O-2 and enhancing CO2 conversion, contributing to its cost-effectiveness. Challenges for electrolysis included high costs of equipment and low current densities. Addressing these limitations could significantly decrease production costs, but challenges arise from the mutual relationship between intrinsic parameters, such as CO2 conversion, CO2 input flow, or energy cost. In a future scenario with affordable feedstocks and equipment, costs could drop below $500 per tonne for both methods. While this may be more challenging for electrolysis due to complexity and expensive catalysts, plasma-based CO production appears more viable and competitive.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001218045900001	Publication Date	2024-05-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1754-5692; 1754-5706	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:205986			Serial	9138
Permanent link to this record



	Author	Cai, Y.; Mei, D.; Chen, Y.; Bogaerts, A.; Tu, X.
	Title	Machine learning-driven optimization of plasma-catalytic dry reforming of methane			Type	A1 Journal Article
	Year	2024	Publication	Journal of Energy Chemistry	Abbreviated Journal	Journal of Energy Chemistry
	Volume	96	Issue		Pages	153-163
	Keywords	A1 Journal Article; Plasma catalysis Machine learning Process optimization Dry reforming of methane Syngas production; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	This study investigates the dry reformation of methane (DRM) over Ni/Al2O3 catalysts in a dielectric barrier discharge (DBD) non-thermal plasma reactor. A novel hybrid machine learning (ML) model is developed to optimize the plasma-catalytic DRM reaction with limited experimental data. To address the non-linear and complex nature of the plasma-catalytic DRM process, the hybrid ML model integrates three well-established algorithms: regression trees, support vector regression, and artificial neural networks. A genetic algorithm (GA) is then used to optimize the hyperparameters of each algorithm within the hybrid ML model. The ML model achieved excellent agreement with the experimental data, demonstrating its efficacy in accurately predicting and optimizing the DRM process. The model was subsequently used to investigate the impact of various operating parameters on the plasma-catalytic DRM performance. We found that the optimal discharge power (20 W), CO2/CH4 molar ratio (1.5), and Ni loading (7.8 wt%) resulted in the maximum energy yield at a total flow rate of 51 mL/min. Furthermore, we investigated the relative significance of each operating parameter on the performance of the plasmacatalytic DRM process. The results show that the total flow rate had the greatest influence on the conversion, with a significance exceeding 35% for each output, while the Ni loading had the least impact on the overall reaction performance. This hybrid model demonstrates a remarkable ability to extract valuable insights from limited datasets, enabling the development and optimization of more efficient and selective plasma-catalytic chemical processes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	2024-04-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2095-4956	ISBN		Additional Links
	Impact Factor	13.1	Times cited		Open Access
	Notes	This project received funding from the European Union’s Hori- zon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 813393.			Approved	Most recent IF: 13.1; 2024 IF: 2.594
	Call Number	PLASMANT @ plasmant @			Serial	9124
Permanent link to this record



	Author	Tsonev, I.; Ahmadi Eshtehardi, H.; Delplancke, M.-P.; Bogaerts, A.
	Title	Importance of geometric effects in scaling up energy-efficient plasma-based nitrogen fixation			Type	A1 Journal article
	Year	2024	Publication	Sustainable energy & fuels	Abbreviated Journal
	Volume		Issue		Pages	1-19
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Despite the recent promising potential of plasma-based nitrogen fixation, the technology faces significant challenges in efficient upscaling. To tackle this challenge, we investigate two reactors, i.e., a small one, operating in a flow rate range of 5-20 ln min-1 and current range of 200-500 mA, and a larger one, operating at higher flow rate (100-300 ln min-1) and current (400-1000 mA). Both reactors operate in a pin-to-pin configuration and are powered by direct current (DC) from the same power supply unit, to allow easy comparison and evaluate the effect of upscaling. In the small reactor, we achieve the lowest energy cost (EC) of 2.8 MJ mol-1, for a NOx concentration of 1.72%, at a flow rate of 20 ln min-1, yielding a production rate (PR) of 33 g h-1. These values are obtained in air; in oxygen-enriched air, the results are typically better, at the cost of producing oxygen-enriched air. In the large reactor, the higher flow rates reduce the NOx concentration due to lower SEI, while maintaining a similar EC. This stresses the important effect of the geometrical configuration of the arc, which is typically concentrated in the center of the reactor, resulting in limited coverage of the reacting gas flow, and this is identified as the limiting factor for upscaling. However, our experiments reveal that by changing the reactor configuration, and thus the plasma geometry and power deposition mechanisms, the amount of gas treated by the plasma can be enhanced, leading to successful upscaling. To obtain more insights in our experiments, we performed thermodynamic equilibrium calculations. First of all, they show that our measured lowest EC closely aligns with the calculated minimum thermodynamic equilibrium at atmospheric pressure. In addition, they reveal that the limited NOx production in the large reactor results from the contracted nature of the plasma. To solve this limitation, we let the large reactor operate in so-called torch configuration. Indeed, the latter enhances the NOx concentrations compared to the pin-to-pin configuration, yielding a PR of 80 g h-1 at an EC of 2.9 MJ mol-1 and NOx concentration of 0.31%. This illustrates the importance of reactor design in upscaling. With the focus on feasibility evaluation of scaling-up plasma-based nitrogen fixation by combined experiments and thermodynamic modelling, we aim to tackle the challenge of design and development of an energy-efficient and scaled-up plasma reactor.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001203657700001	Publication Date	2024-04-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:205435			Serial	9155
Permanent link to this record



	Author	Xu, W.; Van Alphen, S.; Galvita, V.V.; Meynen, V.; Bogaerts, A.
	Title	Effect of Gas Composition on Temperature and CO₂Conversion in a Gliding Arc Plasmatron reactor: Insights for Post‐Plasma Catalysis from Experiments and Computation			Type	A1 Journal Article
	Year	2024	Publication	ChemSusChem	Abbreviated Journal	ChemSusChem
	Volume		Issue		Pages
	Keywords	A1 Journal Article; CO2 conversion · Plasma · Gliding arc plasmatron · Temperature profiles · Computational modelling; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	Plasma‐based CO<sub>2</sub>conversion has attracted increasing interest. However, to understand the impact of plasma operation on post‐plasma processes, we studied the effect of adding N<sub>2</sub>, N<sub>2</sub>/CH<sub>4</sub>and N<sub>2</sub>/CH<sub>4</sub>/H<sub>2</sub>O to a CO<sub>2</sub>gliding arc plasmatron (GAP) to obtain valuable insights into their impact on exhaust stream composition and temperature, which will serve as feed gas and heat for post‐plasma catalysis (PPC). Adding N<sub>2</sub>improves the CO<sub>2</sub>conversion from 4 % to 13 %, and CH<sub>4</sub>addition further promotes it to 44 %, and even to 61 % at lower gas flow rate (6 L/min), allowing a higher yield of CO and hydrogen for PPC. The addition of H<sub>2</sub>O, however, reduces the CO<sub>2</sub>conversion from 55 % to 22 %, but it also lowers the energy cost, from 5.8 to 3 kJ/L. Regarding the temperature at 4.9 cm post‐plasma, N<sub>2</sub>addition increases the temperature, while the CO<sub>2</sub>/CH<sub>4</sub>ratio has no significant effect on temperature. We also calculated the temperature distribution with computational fluid dynamics simulations. The obtained temperature profiles (both experimental and calculated) show a decreasing trend with distance to the exhaust and provide insights in where to position a PPC bed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001200297300001	Publication Date	2024-04-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1864-5631	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.4	Times cited		Open Access
	Notes	We acknowledge the VLAIO Catalisti Moonshot project D2M and the VLAIO Catalisti transition project CO2PERATE (HBC.2017.0692) for financial support. We acknowledge Gilles Van Loon for his help to make the quartz and steel devices for the reactor. Vladimir V. Galvita also acknowledges a personal grant from the Research Fund of Ghent University (BOF; 01N16319).			Approved	Most recent IF: 8.4; 2024 IF: 7.226
	Call Number	PLASMANT @ plasmant @c:irua:205101			Serial	9128
Permanent link to this record



	Author	Albrechts, M.; Tsonev, I.; Bogaerts, A.
	Title	Investigation of O atom kinetics in O₂plasma and its afterglow			Type	A1 Journal Article
	Year	2024	Publication	Plasma Sources Science and Technology	Abbreviated Journal	Plasma Sources Sci. Technol.
	Volume	33	Issue	4	Pages	045017
	Keywords	A1 Journal Article; oxygen plasma, pseudo-1D plug-flow kinetic model, O atoms, low-pressure validation, atmospheric pressure microwave torch; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	We have developed a comprehensive kinetic model to study the O atom kinetics in an O<sub>2</sub>plasma and its afterglow. By adopting a pseudo-1D plug-flow formalism within the kinetic model, our aim is to assess how far the O atoms travel in the plasma afterglow, evaluating its potential as a source of O atoms for post-plasma gas conversion applications. Since we could not find experimental data for pure O<sub>2</sub>plasma at atmospheric pressure, we first validated our model at low pressure (1–10 Torr) where very good experimental data are available. Good agreement between our model and experiments was achieved for the reduced electric field, gas temperature and the densities of the dominant neutral species, i.e. O<sub>2</sub>(a), O<sub>2</sub>(b) and O. Subsequently, we confirmed that the chemistry set is consistent with thermodynamic equilibrium calculations at atmospheric pressure. Finally, we investigated the O atom densities in the O<sub>2</sub>plasma and its afterglow, for which we considered a microwave O<sub>2</sub>plasma torch, operating at a pressure between 0.1 and 1 atm, for a flow rate of 20 slm and an specific energy input of 1656 kJ mol<sup>−1</sup>. Our results show that for both pressure conditions, a high dissociation degree of ca. 92% is reached within the discharge. However, the O atoms travel much further in the plasma afterglow for<italic>p</italic>= 0.1 atm (9.7 cm) than for<italic>p</italic>= 1 atm (1.4 cm), attributed to the longer lifetime (3.8 ms at 0.1 atm vs 1.8 ms at 1 atm) resulting from slower three-body recombination kinetics, as well as a higher volumetric flow rate.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001209453500001	Publication Date	2024-04-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	3.8	Times cited		Open Access
	Notes	This research was supported by the Horizon Europe Framework Program ‘Research and Innovation Actions’ (RIA), Project CANMILK (Grant No. 101069491).			Approved	Most recent IF: 3.8; 2024 IF: 3.302
	Call Number	PLASMANT @ plasmant @c:irua:205920			Serial	9125
Permanent link to this record



	Author	De Meyer, R.; Gorbanev, Y.; Ciocarlan, R.-G.; Cool, P.; Bals, S.; Bogaerts, A.
	Title	Importance of plasma discharge characteristics in plasma catalysis: Dry reforming of methane vs. ammonia synthesis			Type	A1 Journal Article
	Year	2024	Publication	Chemical Engineering Journal	Abbreviated Journal	Chemical Engineering Journal
	Volume	488	Issue		Pages	150838
	Keywords	A1 Journal Article; Gas conversion Dry reforming of methane Ammonia Microdischarges Dielectric barrier discharge; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	Plasma catalysis is a rapidly growing field, often employing a packed-bed dielectric barrier discharge plasma reactor. Such dielectric barrier discharges are complex, especially when a packing material (e.g., a catalyst) is introduced in the discharge volume. Catalysts are known to affect the plasma discharge, though the underlying mechanisms influencing the plasma physics are not fully understood. Moreover, the effect of the catalysts on the plasma discharge and its subsequent effect on the overall performance is often overlooked. In this work, we deliberately design and synthesize catalysts to affect the plasma discharge in different ways. These Ni or Co alumina-based catalysts are used in plasma-catalytic dry reforming of methane and ammonia synthesis. Our work shows that introducing a metal to the dielectric packing can affect the plasma discharge, and that the distribution of the metal is crucial in this regard. Further, the altered discharge can greatly influence the overall performance. In an atmospheric pressure dielectric barrier discharge reactor, this apparently more uniform plasma yields a significantly better performance for ammonia synthesis compared to the more conventional filamentary discharge, while it underperforms in dry reforming of methane. This study stresses the importance of analyzing the plasma discharge in plasma catalysis experiments. We hope this work encourages a more critical view on the plasma discharge characteristics when studying various catalysts in a plasma reactor.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	2024-03-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947	ISBN		Additional Links	UA library record
	Impact Factor	15.1	Times cited		Open Access
	Notes	This research was supported through long-term structural funding (Methusalem FFB15001C) and by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme with grant agreement No 810182 (SCOPE ERC Synergy project) and with grant agreement No 815128 (REALNANO). We acknowledge the practical contribution of Senne Van Doorslaer.			Approved	Most recent IF: 15.1; 2024 IF: 6.216
	Call Number	PLASMANT @ plasmant @c:irua:205154			Serial	9115
Permanent link to this record



	Author	Gorbanev, Y.; Fedirchyk, I.; Bogaerts, A.
	Title	Plasma catalysis in ammonia production and decomposition: Use it, or lose it?			Type	A1 Journal Article
	Year	2024	Publication	Current Opinion in Green and Sustainable Chemistry	Abbreviated Journal	Current Opinion in Green and Sustainable Chemistry
	Volume	47	Issue		Pages	100916
	Keywords	A1 Journal Article; Plasma Nitrogen fixation Ammonia Plasma catalysis Production and decomposition; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	The combination of plasma with catalysis for the synthesis and decomposition of NH3 is an attractive route to the production of carbon-neutral fertiliser and energy carriers and its conversion into H2. Recent years have seen fast developments in the field of plasma-catalytic NH3 life cycle. This work summarises the most recent advances in plasma-catalytic and related NH3-focussed processes, identifies some of the most important discoveries, and addresses plausible strategies for future developments in plasma-based NH3 technology.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	2024-03-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2452-2236	ISBN		Additional Links
	Impact Factor	9.3	Times cited		Open Access
	Notes	The work was supported by the Fund for Scientific Research (FWO) Flanders Bioeconomy project (grant G0G2322N) funded by the European Union-NextGe- nerationEU, the HyPACT project funded by the Belgian Energy Transition Fund, and the MSCA4Ukraine project 1233629 funded by the European Union.			Approved	Most recent IF: 9.3; 2024 IF: NA
	Call Number	PLASMANT @ plasmant @			Serial	9117
Permanent link to this record



	Author	Manaigo, F.; Bahnamiri, O.S.; Chatterjee, A.; Panepinto, A.; Krumpmann, A.; Michiels, M.; Bogaerts, A.; Snyders, R.
	Title	Electrical stability and performance of a nitrogen-oxygen atmospheric pressure gliding arc plasma			Type	A1 Journal article
	Year	2024	Publication	ACS Sustainable Chemistry and Engineering	Abbreviated Journal
	Volume	12	Issue	13	Pages	5211-5219
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Nonthermal plasmas are currently being studied as a green alternative to the Haber-Bosch process, which is, today, the dominant industrial process allowing for the fixation of nitrogen and, as such, a fundamental component for the production of nitrogen-based industrial fertilizers. In this context, the gliding arc plasma (GAP) is considered a promising choice among nonthermal plasma options. However, its stability is still a key parameter to ensure industrial transfer of the technology. Nowadays, the conventional approach to stabilize this plasma process is to use external resistors. Although this indeed allows for an enhancement of the plasma stability, very little is reported about how it impacts the process efficiency, both in terms of NOx yield and energy cost. In this work, this question is specifically addressed by studying a DC-powered GAP utilized for nitrogen fixation into NOx at atmospheric pressure stabilized by variable external resistors. Both the performance and the stability of the plasma are reported as a function of the utilization of the resistors. The results confirm that while the use of a resistor indeed allows for a strong stabilization of the plasma without impacting the NOx yield, especially at high plasma current, it dramatically impacts the energy cost of the process, which increases from 2.82 to 7.9 MJ/mol. As an alternative approach, we demonstrate that the replacement of the resistor by an inductor is promising since it allows for decent stabilization of the plasma, while it does not affect either the energy cost of the process or the NOx yield.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001186347900001	Publication Date	2024-03-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2168-0485	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:204774			Serial	9146
Permanent link to this record



	Author	Heirman, P.; Verloy, R.; Baroen, J.; Privat-Maldonado, A.; Smits, E.; Bogaerts, A.
	Title	Liquid treatment with a plasma jet surrounded by a gas shield: effect of the treated substrate and gas shield geometry on the plasma effluent conditions			Type	A1 Journal Article
	Year	2024	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J. Phys. D: Appl. Phys.
	Volume	57	Issue	11	Pages	115204
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT); Center for Oncological Research (CORE)
	Abstract	The treatment of a well plate by an atmospheric pressure plasma jet is common for<italic>in vitro</italic>plasma medicine research. Here, reactive species are largely produced through the mixing of the jet effluent with the surrounding atmosphere. This mixing can be influenced not only by the ambient conditions, but also by the geometry of the treated well. To limit this influence and control the atmosphere, a shielding gas is sometimes applied. However, the interplay between the gas shield and the well geometry has not been investigated. In this work, we developed a 2D-axisymmetric computational fluid dynamics model of the kINPen plasma jet, to study the mixing of the jet effluent with the surrounding atmosphere, with and without gas shield. Our computational and experimental results show that the choice of well type can have a significant influence on the effluent conditions, as well as on the effectiveness of the gas shield. Furthermore, the geometry of the shielding gas device can substantially influence the mixing as well. Our results provide a deeper understanding of how the choice of setup geometry can influence the plasma treatment, even when all other operating parameters are unchanged.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001127372200001	Publication Date	2024-03-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	3.4	Times cited		Open Access	Not_Open_Access
	Notes	Fund for Scientific Research Flanders, 1100421N ;			Approved	Most recent IF: 3.4; 2024 IF: 2.588
	Call Number	PLASMANT @ plasmant @c:irua:201999			Serial	8977
Permanent link to this record



	Author	Gerrits, N.; Jackson, B.; Bogaerts, A.
	Title	Accurate Reaction Probabilities for Translational Energies on Both Sides of the Barrier of Dissociative Chemisorption on Metal Surfaces			Type	A1 Journal Article
	Year	2024	Publication	The Journal of Physical Chemistry Letters	Abbreviated Journal	J. Phys. Chem. Lett.
	Volume	15	Issue	9	Pages	2566-2572
	Keywords	A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	Molecular dynamics simulations are essential for a better understanding of dissociative chemisorption on metal surfaces, which is often the rate-controlling step in heterogeneous and plasma catalysis. The workhorse quasi-classical trajectory approach ubiquitous in molecular dynamics is able to accurately predict reactivity only for high translational and low vibrational energies. In contrast, catalytically relevant conditions generally involve low translational and elevated vibrational energies. Existing quantum dynamics approaches are intractable or approximate as a result of the large number of degrees of freedom present in molecule−metal surface reactions. Here, we extend a ring polymer molecular dynamics approach to fully include, for the first time, the degrees of freedom of a moving metal surface. With this approach, experimental sticking probabilities for the dissociative chemisorption of methane on Pt(111) are reproduced for a large range of translational and vibrational energies by including nuclear quantum effects and employing full-dimensional simulations.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001177959900001	Publication Date	2024-03-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1948-7185	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	5.7	Times cited		Open Access
	Notes	Nick Gerrits has been financially supported through a Dutch Research Council (NWO) Rubicon grant (019.202EN.012). The computational resources and services used in this work were provided by the high performance computing (HPC) core facility CalcUA of the Universiteit Antwerpen and the Flemish Supercomputer Center (VSC) funded by the Research Foundation−Flanders (FWO) and the Flemish Government. The authors thank Mark Somers for useful discussions.			Approved	Most recent IF: 5.7; 2024 IF: 9.353
	Call Number	PLASMANT @ plasmant @c:irua:204818			Serial	9114
Permanent link to this record



	Author	Grünewald, L.; Chezganov, D.; De Meyer, R.; Orekhov, A.; Van Aert, S.; Bogaerts, A.; Bals, S.; Verbeeck, J.
	Title	In Situ Plasma Studies Using a Direct Current Microplasma in a Scanning Electron Microscope			Type	A1 Journal Article
	Year	2024	Publication	Advanced Materials Technologies	Abbreviated Journal	Adv Materials Technologies
	Volume		Issue		Pages
	Keywords	A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ;
	Abstract	Microplasmas can be used for a wide range of technological applications and to improve the understanding of fundamental physics. Scanning electron microscopy, on the other hand, provides insights into the sample morphology and chemistry of materials from the mm‐ down to the nm‐scale. Combining both would provide direct insight into plasma‐sample interactions in real‐time and at high spatial resolution. Up till now, very few attempts in this direction have been made, and significant challenges remain. This work presents a stable direct current glow discharge microplasma setup built inside a scanning electron microscope. The experimental setup is capable of real‐time in situ imaging of the sample evolution during plasma operation and it demonstrates localized sputtering and sample oxidation. Further, the experimental parameters such as varying gas mixtures, electrode polarity, and field strength are explored and experimental<italic>V</italic>–<italic>I</italic>curves under various conditions are provided. These results demonstrate the capabilities of this setup in potential investigations of plasma physics, plasma‐surface interactions, and materials science and its practical applications. The presented setup shows the potential to have several technological applications, for example, to locally modify the sample surface (e.g., local oxidation and ion implantation for nanotechnology applications) on the µm‐scale.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001168639900001	Publication Date	2024-02-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2365-709X	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	6.8	Times cited		Open Access	OpenAccess
	Notes	L.G., S.B., and J.V. acknowledge support from the iBOF-21-085 PERsist research fund. D.C., S.V.A., and J.V. acknowledge funding from a TOPBOF project of the University of Antwerp (FFB 170366). R.D.M., A.B., and J.V. acknowledge funding from the Methusalem project of the University of Antwerp (FFB 15001A, FFB 15001C). A.O. and J.V. acknowledge funding from the Research Foundation Flanders (FWO, Belgium) project SBO S000121N.			Approved	Most recent IF: 6.8; 2024 IF: NA
	Call Number	EMAT @ emat @c:irua:204363			Serial	8995
Permanent link to this record



	Author	O'Modhrain, C.; Trenchev, G.; Gorbanev, Y.; Bogaerts, A.
	Title	Upscaling plasma-based CO₂ conversion : case study of a multi-reactor gliding arc plasmatron			Type	A1 Journal article
	Year	2024	Publication	ACS Engineering Au	Abbreviated Journal
	Volume		Issue		Pages
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Atmospheric pressure plasmas have shifted in recent years from being a burgeoning research field in the academic setting to an actively investigated technology in the chemical, oil, and environmental industries. This is largely driven by the climate change mitigation efforts, as well as the evident pathways of value creation by converting greenhouse gases (such as CO2) into useful chemical feedstock. Currently, most high technology readiness level (TRL) plasma-based technologies are based on volumetric and power-based scaling of thermal plasma systems, which results in large capital investment and regular maintenance costs. This work investigates bringing a quasi-thermal (so-called “warm”) plasma setup, namely, a gliding arc plasmatron, from a lab-scale to a pilot-scale capacity with an increase in throughput capacity by a factor of 10. The method of scaling is the parallelization of plasmatron reactors within a single housing, with the aim of maintaining a warm plasma regime while simultaneously improving build cost and efficiency (compared to separate reactors operating in parallel). Special attention is also given to the safety and control features implemented in the setup, a key component required for integration into industrial systems. The performance of the multi-reactor gliding arc plasmatron (MRGAP) reactor is investigated, focusing on the influence of flow rate and the number of active reactors. The location of active reactors was deemed to have a negligible effect on the monitored metrics of conversion, energy efficiency, and energy cost. The optimum operating conditions were found to be with the most active reactors (five) at the highest investigated flow rate (80 L/min). Analysis of results suggests that an optimum conversion (9%) and plug power-based energy efficiency (19%) can be maintained at a specific energy input (SEI) around 5.3 kJ/L (or 1 eV/molecule). The concept of parallelization of plasmatron reactors within a singular housing was demonstrated to be a viable method for scaling up from a lab-scale to a prototype-scale device, with performance analysis suggesting that increasing the power (through adding more reactor channels) and total flow rate, while maintaining an SEI around 5.3 or 4.2 kJ/L, i.e., 1.3 or 1 eV/molecule (based on plug power and plasma-deposited power, respectively), can result in increased conversion rate without sacrificing absolute conversion or energy efficiency.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001166625200001	Publication Date	2024-02-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:204749			Serial	9182
Permanent link to this record



	Author	Manaigo, F.; Rouwenhorst, K.; Bogaerts, A.; Snyders, R.
	Title	Feasibility study of a small-scale fertilizer production facility based on plasma nitrogen fixation			Type	A1 Journal Article
	Year	2024	Publication	Energy Conversion and Management	Abbreviated Journal	Energy Conversion and Management
	Volume	302	Issue		Pages	118124
	Keywords	A1 Journal Article; Plasma-based nitrogen fixation Haber-Bosch Feasibility study Fertilizer production; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001171038200001	Publication Date	2024-01-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0196-8904	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	10.4	Times cited		Open Access	Not_Open_Access
	Notes	This research is supported by the FNRS-FWO project ‘‘NITROPLASM’’, EOS O005118F. The authors thank Dr. L. Hollevoet (KU Leuven) for the draft reviewing and for providing additional information on the lean NO???? trap.			Approved	Most recent IF: 10.4; 2024 IF: 5.589
	Call Number	PLASMANT @ plasmant @c:irua:204351			Serial	8992
Permanent link to this record



	Author	Wang, K.; Ceulemans, S.; Zhang, H.; Tsonev, I.; Zhang, Y.; Long, Y.; Fang, M.; Li, X.; Yan, J.; Bogaerts, A.
	Title	Inhibiting recombination to improve the performance of plasma-based CO2 conversion			Type	A1 Journal Article
	Year	2024	Publication	Chemical Engineering Journal	Abbreviated Journal	Chemical Engineering Journal
	Volume	481	Issue		Pages	148684
	Keywords	A1 Journal Article; Plasma-based CO2 splitting Recombination reactions In-situ gas sampling Fluid dynamics modeling Kinetics modeling Afterglow quenching; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	Warm plasma offers a promising route for CO2 splitting into valuable CO, yet recombination reactions of CO with oxygen, forming again CO2, have recently emerged as critical limitation. This study combines experiments and fluid dynamics + chemical kinetics modelling to comprehensively analyse the recombination reactions upon CO2 splitting in an atmospheric plasmatron. We introduce an innovative in-situ gas sampling technique, enabling 2D spatial mapping of gas product compositions and temperatures, experimentally confirming for the first time the substantial limiting effect of CO recombination reactions in the afterglow region. Our results show that the CO mole fraction at a 5 L/min flow rate drops significantly from 11.9 % at a vertical distance of z = 20 mm in the afterglow region to 8.6 % at z = 40 mm. We constructed a comprehensive 2D model that allows for spatial reaction rates analysis incorporating crucial reactions, and we validated it to kinetically elucidate this phenomenon. CO2 +M⇌O+CO+M and CO2 +O⇌CO+O2 are the dominant reactions, with the forward reactions prevailing in the plasma region and the backward reactions becoming prominent in the afterglow region. These results allow us to propose an afterglow quenching strategy for performance enhancement, which is further demonstrated through a meticulously developed plasmatron reactor with two-stage cooling. Our approach substantially increases the CO2 conversion (e.g., from 6.6 % to 19.5 % at 3 L/min flow rate) and energy efficiency (from 13.5 % to 28.5 %, again at 3 L/min) and significantly shortens the startup time (from ~ 150 s to 25 s). Our study underscores the critical role of inhibiting recombination reactions in plasma-based CO2 conversion and offers new avenues for performance enhancement.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001168999200001	Publication Date	2024-01-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	15.1	Times cited		Open Access	Not_Open_Access
	Notes	Key Research and Development Program of Zhejiang Province, 2023C03129 ; Vlaamse regering; European Research Council; National Natural Science Foundation of China, 51976191 52276214 ; Horizon 2020 Framework Programme; Fonds De La Recherche Scientifique – FNRS; Fonds Wetenschappelijk Onderzoek, 1101524N ; Vlaams Supercomputer Centrum; Horizon 2020, 101081162 810182 ; European Research Council;			Approved	Most recent IF: 15.1; 2024 IF: 6.216
	Call Number	PLASMANT @ plasmant @c:irua:204352			Serial	8993
Permanent link to this record



	Author	Kelly, S.; Mercer, E.; Gorbanev, Y.; Fedirchyk, I.; Verheyen, C.; Werner, K.; Pullumbi, P.; Cowley, A.; Bogaerts, A.
	Title	Plasma-based conversion of martian atmosphere into life-sustaining chemicals: The benefits of utilizing martian ambient pressure			Type	A1 Journal Article
	Year	2024	Publication	Journal of CO2 utilization	Abbreviated Journal	Journal of CO2 Utilization
	Volume	80	Issue		Pages	102668
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	We explored the potential of plasma-based In-Situ Resource Utilization (ISRU) for Mars through the conversion of Martian atmosphere (~96% CO2, 2% N2, and 2% Ar) into life-sustaining chemicals. As the Martian surface pressure is about 1% of the Earth’s surface pressure, it is an ideal environment for plasma-based gas conversion using microwave reactors. At 1000 W and 10 Ln/min (normal liters per minute), we produced ~76 g/h of O2 and ~3 g/h of NOx using a 2.45 GHz waveguided reactor at 25 mbar, which is ~3.5 times Mars ambient pressure. The energy cost required to produce O2 was ~0.013 kWh/g, which is very promising compared to recently concluded MOXIE experiments on the Mars surface. This marks a crucial step towards realizing the extension of human exploration.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001156084300001	Publication Date	2024-01-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2212-9820	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	7.7	Times cited		Open Access	Not_Open_Access
	Notes	We acknowledge financial support by a European Space Agency (ESA) Open Science Innovation Platform study (contract no. 4000137001/21/NL/GLC/ov), the European Marie Skłodowska-Curie Individual Fellowship ‘‘PENFIX’’ within Horizon 2020 (grant no. 838181), the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program (grant no. 810182; SCOPE ERC Synergy project), the Excellence of Science FWOFNRS PLASyntH2 project (FWO grant no. G0I1822N and EOS no. 4000751) and the Methusalem project of the University of Antwerp.			Approved	Most recent IF: 7.7; 2024 IF: 4.292
	Call Number	PLASMANT @ plasmant @c:irua:202389			Serial	8986
Permanent link to this record



	Author	Bissonnette-Dulude, J.; Heirman, P.; Coulombe, S.; Bogaerts, A.; Gervais, T.; Reuter, S.
	Title	Coupling the COST reference plasma jet to a microfluidic device: a computational study			Type	A1 Journal Article
	Year	2024	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci. Technol.
	Volume	33	Issue	1	Pages	015001
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The use of microfluidic devices in the field of plasma-liquid interaction can unlock unique possibilities to investigate the effects of plasma-generated reactive species for environmental and biomedical applications. So far, very little simulation work has been performed on microfluidic devices in contact with a plasma source. We report on the modelling and computational simulation of physical and chemical processes taking place in a novel plasma-microfluidic platform. The main production and transport pathways of reactive species both in plasma and liquid are modelled by a novel modelling approach that combines 0D chemical kinetics and 2D transport mechanisms. This combined approach, applicable to systems where the transport of chemical species occurs in unidirectional flows at high Péclet numbers, decreases calculation times considerably compared to regular 2D simulations. It takes advantage of the low computational time of the 0D reaction models while providing spatial information through multiple plug-flow simulations to yield a quasi-2D model. The gas and liquid flow profiles are simulated entirely in 2D, together with the chemical reactions and transport of key chemical species. The model correctly predicts increased transport of hydrogen peroxide into the liquid when the microfluidic opening is placed inside the plasma effluent region, as opposed to inside the plasma region itself. Furthermore, the modelled hydrogen peroxide production and transport in the microfluidic liquid differs by less than 50% compared with experimental results. To explain this discrepancy, the limits of the 0D–2D combined approach are discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001136607100001	Publication Date	2024-01-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	3.8	Times cited		Open Access	Not_Open_Access
	Notes	Natural Sciences and Engineering Research Council of Canada, RGPIN-06820 ; FWO, 1100421N ; McGill University, the TransMedTech Institute;			Approved	Most recent IF: 3.8; 2024 IF: 3.302
	Call Number	PLASMANT @ plasmant @c:irua:202783			Serial	8990
Permanent link to this record



	Author	Slaets, J.; Loenders, B.; Bogaerts, A.
	Title	Plasma-based dry reforming of CH4: Plasma effects vs. thermal conversion			Type	A1 Journal Article
	Year	2024	Publication	Fuel	Abbreviated Journal	Fuel
	Volume	360	Issue		Pages	130650
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this work we evaluate the chemical kinetics of dry reforming of methane in warm plasmas (1000–4000 K) using modelling with a newly developed chemistry set, for a broad range of parameters (temperature, power density and CO2/CH4 ratio). We compare the model against thermodynamic equilibrium concentrations, serving as validation of the thermal chemical kinetics. Our model reveals that plasma-specific reactions (i.e., electron impact collisions) accelerate the kinetics compared to thermal conversion, rather than altering the overall kinetics pathways and intermediate products, for gas temperatures below 2000 K. For higher temperatures, the kinetics are dominated by heavy species collisions and are strictly thermal, with negligible influence of the electrons and ions on the overall kinetics. When studying the effects of different gas mixtures on the kinetics, we identify important intermediate species, side reactions and side products. The use of excess CO2 leads to H2O formation, at the expense of H2 formation, and the CO2 conversion itself is limited, only approaching full conversion near 4000 K. In contrast, full conversion of both reactants is only kinetically limited for mixtures with excess CH4, which also gives rise to the formation of C2H2, alongside syngas. Within the given parameter space, our model predicts the 30/70 ratio of CO2/CH4 to be the most optimal for syngas formation with a H2/CO ratio of 2.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001138077700001	Publication Date	2023-12-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0016-2361	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.4	Times cited		Open Access	Not_Open_Access
	Notes	This research was supported by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement No. 810182 – SCOPE ERC Synergy project), the Catalisti-ICON project BluePlasma (Project No. HBC.2022.0445), the FWO-SBO project PlasMaCatDESIGN (FWO Grant ID S001619N), the Independent Research Fund Denmark (Project No. 0217-00231B) and through long-term structural funding (Methusalem). The computational resources and services used in this work were provided by the HPC core facility CalcUA of the Universiteit Antwerpen, and VSC (Flemish Supercomputer Center), funded by the Research Foundation – Flanders (FWO) and the Flemish Government. We also thank Bart Wanten, Roel Michiels, Pepijn Heirman, Claudia Verheyen, dr. Senne Van Alphen, dr. Elise Vervloessem, dr. Kevin van ’t Veer, dr. Joshua Boothroyd, dr. Omar Biondo and dr. Eduardo Morais for their expertise and feedback regarding the kinetics scheme.			Approved	Most recent IF: 7.4; 2024 IF: 4.601
	Call Number	PLASMANT @ plasmant @c:irua:201669			Serial	8973
Permanent link to this record



	Author	Meng, S.; Li, S.; Sun, S.; Bogaerts, A.; Liu, Y.; Yi, Y.
	Title	NH3 decomposition for H2 production by thermal and plasma catalysis using bimetallic catalysts			Type	A1 Journal Article
	Year	2024	Publication	Chemical engineering science	Abbreviated Journal	Chemical Engineering Science
	Volume	283	Issue		Pages	119449
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Plasma catalysis has emerged as a promising approach for driving thermodynamically unfavorable chemical reactions. Nevertheless, comprehending the mechanisms involved remains a challenge, leading to uncertainty about whether the optimal catalyst in plasma catalysis aligns with that in thermal catalysis. In this research, we explore this question by studying monometallic catalysts (Fe, Co, Ni and Mo) and bimetallic catalysts (Fe-Co, Mo- Co, Fe-Ni and Mo-Ni) in both thermal catalytic and plasma catalytic NH3 decomposition. Our findings reveal that the Fe-Co bimetallic catalyst exhibits the highest activity in thermal catalysis, the Fe-Ni bimetallic catalyst outperforms others in plasma catalysis, indicating a discrepancy between the optimal catalysts for the two catalytic modes in NH3 decomposition. Comprehensive catalyst characterization, kinetic analysis, temperature program surface reaction experiments and plasma diagnosis are employed to discuss the key factors influencing NH3 decomposition performance.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001105312500001	Publication Date	2023-10-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0009-2509	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.7	Times cited		Open Access	Not_Open_Access
	Notes	Universiteit Antwerpen, 32249 ; National Natural Science Foundation of China, 21503032 ; PetroChina Innovation Foundation, 2018D-5007-0501 ;			Approved	Most recent IF: 4.7; 2024 IF: 2.895
	Call Number	PLASMANT @ plasmant @c:irua:201009			Serial	8967
Permanent link to this record



	Author	Morais, E.; Bogaerts, A.
	Title	Modelling the dynamics of hydrogen synthesis from methane in nanosecond‐pulsed plasmas			Type	A1 Journal Article
	Year	2024	Publication	Plasma processes and polymers	Abbreviated Journal	Plasma Processes & Polymers
	Volume	21	Issue	1	Pages
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A chemical kinetics model was developed to characterise the gas‐phase dynamics of H<sub>2</sub>production in nanosecond‐pulsed CH<sub>4</sub>plasmas. Pulsed behaviour was observed in the calculated electric field, electron temperature and species densities at all pressures. The model agrees reasonably with experimental results, showing CH<sub>4</sub>conversion at 30% and C<sub>2</sub>H<sub>2</sub>and H<sub>2</sub>as major products. The underlying mechanisms in CH<sub>4</sub>dissociation and H<sub>2</sub>formation were analysed, highlighting the large contribution of vibrationally excited CH<sub>4</sub>and H<sub>2</sub>to coupling energy from the plasma into gas‐phase heating, and revealing that H<sub>2</sub>synthesis is not affected by applied pressure, with selectivity remaining unchanged at ~42% in the 1–5 bar range.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001091258700001	Publication Date	2023-10-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1612-8850	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.5	Times cited		Open Access	Not_Open_Access
	Notes	We gratefully acknowledge financial support by the Flemish Government through the Moonshot cSBO project “Power‐to‐Olefins” (P2O; HBC.2020.2620) and funding from the Independent Research Fund Denmark (project nr. 0217‐00231B).			Approved	Most recent IF: 3.5; 2024 IF: 2.846
	Call Number	PLASMANT @ plasmant @c:irua:201192			Serial	8983
Permanent link to this record



	Author	De Luca, F.; Abate, S.; Bogaerts, A.; Centi, G.
	Title	Electrified CO2 conversion : integrating experimental, computational, and process simulation methods for sustainable chemical synthesis			Type	Doctoral thesis
	Year	2024	Publication		Abbreviated Journal
	Volume		Issue		Pages	xv, 152 p.
	Keywords	Doctoral thesis; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Nowadays, the burning of fossil fuels, particularly petroleum, natural gas, and coal, meets the rising need for power and fuels for automobiles and industries. This has given rise to ecological and climate challenges. This thesis explores these issues from three distinct perspectives: (i) experimental, (ii) computational, and (iii) process simulation, with a focus on studying CO2 as an alternative and economically viable raw material. Firstly, the experimental study is focused on the synthesis, characterization, and testing of novel catalysts for electroreduction of CO2 and oxalic acid, an intermediate product of CO2. Electrocatalysts based on Cu supported by citrus (orange and lemon) peel biomass are prepared. These catalysts exhibit activity in the electrochemical reduction of CO2, emphasizing the effectiveness of biomasses, particularly orange peels, as environmentally friendly precursors for sustainable and efficient electrocatalysts. In addition, graphitic carbon nitrides/TiO2 nanotubes (g-C3N4/TiNT) composites are prepared for the electrocatalytic reduction of oxalic acid to glycolic acid, revealing superior electrocatalytic properties compared to pristine TiNT. Characterization by X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electronic microscopy were performed for all the prepared electrocatalysts. Delving into the reduction of CO2 on Cu catalysts, a computational study about the synthesis of methanol on Cu(111) surface is performed by using the Vienna Ab initio Simulation Package. A systematic study is carried out to define the activation energies of the elementary reactions by using mGGA DF. Consequently, it is shown that the rate-controlling step is CH3O* hydrogenation and the formate pathway on Cu(111) proceeds through the HCOOH* intermediate. Finally, the process simulation, performed by using the software Aspen Plus 11 from AspenTech Inc., is based on the comparison of a catalytic (oxidation of ethylene glycol) and an electrocatalytic process (CO2 electroreduction chain) to synthesize glycolic acid. An economic analysis of the operational and investment costs reveals that the catalytic process is more cost-effective due to the current instability of electrocatalysts and proton exchange membranes, resulting in increased maintenance costs and, consequently, higher prices for the product.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:205262			Serial	9147
Permanent link to this record



	Author	Živanić, M.; Espona‐Noguera, A.; Verswyvel, H.; Smits, E.; Bogaerts, A.; Lin, A.; Canal, C.
	Title	Injectable Plasma‐Treated Alginate Hydrogel for Oxidative Stress Delivery to Induce Immunogenic Cell Death in Osteosarcoma			Type	A1 Journal Article
	Year	2023	Publication	Advanced functional materials	Abbreviated Journal	Adv Funct Materials
	Volume		Issue		Pages
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT); Center for Oncological Research (CORE)
	Abstract	Cold atmospheric plasma (CAP) is a source of cell‐damaging oxidant molecules that may be used as low‐cost cancer treatment with minimal side effects. Liquids treated with cold plasma and enriched with oxidants are a modality for non‐invasive treatment of internal tumors with cold plasma via injection. However, liquids are easily diluted with body fluids which impedes high and localized delivery of oxidants to the target. As an alternative, plasma‐treated hydrogels (PTH) emerge as vehicles for the precise delivery of oxidants. This study reports an optimal protocol for the preparation of injectable alginate PTH that ensures the preservation of plasma‐generated oxidants. The generation, storage, and release of oxidants from the PTH are assessed. The efficacy of the alginate PTH in cancer treatment is demonstrated in the context of cancer cell cytotoxicity and immunogenicity–release of danger signals and phagocytosis by immature dendritic cells, up to now unexplored for PTH. These are shown in osteosarcoma, a hard‐to‐treat cancer. The study aims to consolidate PTH as a novel cold plasma treatment modality for non‐invasive or postoperative tumor treatment. The results offer a rationale for further exploration of alginate‐based PTHs as a versatile platform in biomedical engineering.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001129424500001	Publication Date	2023-12-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1616-301X	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	19	Times cited		Open Access
	Notes	Fonds Wetenschappelijk Onderzoek, 1S67621N ; European Cooperation in Science and Technology, COST Action CA20114 ; Agència de Gestió d'Ajuts Universitaris i de Recerca, SGR2022‐1368 ; Agencia Estatal de Investigación, PID2019‐ 103892RB‐I00/AEI/10.13039/501100011033 ; Instituto de Salud Carlos III, IHRC22/00003 ;			Approved	Most recent IF: 19; 2023 IF: 12.124
	Call Number	PLASMANT @ plasmant @c:irua:202030			Serial	8979
Permanent link to this record



	Author	Bogaerts, A.
	Title	Special Issue on “Dielectric Barrier Discharges and their Applications” in Commemoration of the 20th Anniversary of Dr. Ulrich Kogelschatz’s Work			Type	A1 Journal Article
	Year	2023	Publication	Plasma Chemistry and Plasma Processing	Abbreviated Journal	Plasma Chem Plasma Process
	Volume	43	Issue	6	Pages	1281-1285
	Keywords	A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	n/a
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001110371000001	Publication Date	2023-11-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0272-4324	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	3.6	Times cited		Open Access	Not_Open_Access
	Notes	n/a			Approved	Most recent IF: 3.6; 2023 IF: 2.355
	Call Number	PLASMANT @ plasmant @c:irua:201387			Serial	8969
Permanent link to this record



	Author	Rouwenhorst, K.H.R.; Jardali, F.; Bogaerts, A.; Lefferts, L.
	Title	Correction: From the Birkeland–Eyde process towards energy-efficient plasma-based NO_Xsynthesis: a techno-economic analysis			Type	A1 Journal Article
	Year	2023	Publication	Energy & Environmental Science	Abbreviated Journal	Energy Environ. Sci.
	Volume	16	Issue	12	Pages	6170-6173
	Keywords	A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	Correction for ‘From the Birkeland–Eyde process towards energy-efficient plasma-based NO<sub><italic>X</italic></sub>synthesis: a techno-economic analysis’ by Kevin H. R. Rouwenhorst<italic>et al.</italic>,<italic>Energy Environ. Sci.</italic>, 2021,<bold>14</bold>, 2520–2534, https://doi.org/10.1039/D0EE03763J.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	2023-11-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1754-5692	ISBN		Additional Links
	Impact Factor	32.5	Times cited		Open Access
	Notes	H2020 European Research Council; Horizon 2020, 810182 ; Ministerie van Economische Zaken en Klimaat;			Approved	Most recent IF: 32.5; 2023 IF: 29.518
	Call Number	PLASMANT @ plasmant @			Serial	8980
Permanent link to this record



	Author	Biondo, O.; van Deursen, C.F.A.M.; Hughes, A.; van de Steeg, A.; Bongers, W.; van de Sanden, M.C.M.; van Rooij, G.; Bogaerts, A.
	Title	Avoiding solid carbon deposition in plasma-based dry reforming of methane			Type	A1 Journal Article
	Year	2023	Publication	Green Chemistry	Abbreviated Journal	Green Chem.
	Volume	25	Issue	24	Pages	10485-10497
	Keywords	A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	Solid carbon deposition is a persistent challenge in dry reforming of methane (DRM), affecting both classical and plasma-based processes. In this work, we use a microwave plasma in reverse vortex flow configuration to overcome this issue in CO<sub>2</sub>/CH<sub>4</sub>plasmas. Indeed, this configuration efficiently mitigates carbon deposition, enabling operation even with pure CH<sub>4</sub>feed gas, in contrast to other configurations. At the same time, high reactor performance is achieved, with CO<sub>2</sub>and CH<sub>4</sub>conversions reaching 33% and 44% respectively, at an energy cost of 14 kJ L<sup>−1</sup>for a CO<sub>2</sub> : CH<sub>4</sub>ratio of 1 : 1. Laser scattering and optical emission imaging demonstrate that the shorter residence time in reverse vortex flow lowers the gas temperature in the discharge, facilitating a shift from full to partial CH<sub>4</sub>pyrolysis. This underscores the pivotal role of flow configuration in directing process selectivity, a crucial factor in complex chemistries like CO<sub>2</sub>/CH<sub>4</sub>mixtures and very important for industrial applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001110100100001	Publication Date	2023-11-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1463-9262	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	9.8	Times cited		Open Access
	Notes	Universiteit Antwerpen; Nederlandse Organisatie voor Wetenschappelijk Onderzoek; HORIZON EUROPE Marie Sklodowska-Curie Actions, 813393 ;			Approved	Most recent IF: 9.8; 2023 IF: 9.125
	Call Number	PLASMANT @ plasmant @c:irua:202138			Serial	8978
Permanent link to this record



	Author	Li, S.; Sun, J.; Gorbanev, Y.; van’t Veer, K.; Loenders, B.; Yi, Y.; Kenis, T.; Chen, Q.; Bogaerts, A.
	Title	Plasma-Assisted Dry Reforming of CH₄: How Small Amounts of O₂Addition Can Drastically Enhance the Oxygenate Production─Experiments and Insights from Plasma Chemical Kinetics Modeling			Type	A1 Journal Article
	Year	2023	Publication	ACS Sustainable Chemistry & Engineering	Abbreviated Journal	ACS Sustainable Chem. Eng.
	Volume	11	Issue	42	Pages	15373-15384
	Keywords	A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	Plasma-based dry reforming of methane (DRM) into high-value-added oxygenates is an appealing approach to enable otherwise thermodynamically unfavorable chemical reactions at ambient pressure and near room temperature. However, it suffers from coke deposition due to the deep decomposition of CH4. In this work, we assess the DRM performance upon O2 addition, as well as varying temperature, CO2/CH4 ratio, discharge power, and gas residence time, for optimizing oxygenate production. By adding O2, the main products can be shifted from syngas (CO + H2) toward oxygenates. Chemical kinetics modeling shows that the improved oxygenate production is due to the increased concentration of oxygen-containing radicals, e.g., O, OH, and HO2, formed by electron impact dissociation [e + O2 → e + O + O/O(1D)] and subsequent reactions with H atoms. Our study reveals the crucial role of oxygen-coupling in DRM aimed at oxygenates, providing practical solutions to suppress carbon deposition and at the same time enhance the oxygenates production in plasma-assisted DRM.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001082603900001	Publication Date	2023-10-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2168-0485	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.4	Times cited		Open Access	Not_Open_Access
	Notes	Fonds Wetenschappelijk Onderzoek, S001619N ; China Scholarship Council, 202006060029 ; National Natural Science Foundation of China, 21975018 ; H2020 European Research Council, 810182 ;			Approved	Most recent IF: 8.4; 2023 IF: 5.951
	Call Number	PLASMANT @ plasmant @c:irua:201013			Serial	8966
Permanent link to this record



	Author	Lin, A.; Gromov, M.; Nikiforov, A.; Smits, E.; Bogaerts, A.
	Title	Characterization of Non-Thermal Dielectric Barrier Discharges for Plasma Medicine: From Plastic Well Plates to Skin Surfaces			Type	A1 Journal Article
	Year	2023	Publication	Plasma Chemistry and Plasma Processing	Abbreviated Journal	Plasma Chem Plasma Process
	Volume	43	Issue	6	Pages	1587-1612
	Keywords	A1 Journal Article; Non-thermal plasma · Plasma medicine · Dielectric barrier discharge · Plasma diagnostics · Plasma surface interaction · In situ plasma monitoring; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	technologies have been expanding, and one of the most exciting and rapidly growing applications is in biology and medicine. Most biomedical studies with DBD plasma systems are performed in vitro, which include cells grown on the surface of plastic well plates, or in vivo, which include animal research models (e.g. mice, pigs). Since many DBD systems use the biological target as the secondary electrode for direct plasma generation and treatment, they are sensitive to the surface properties of the target, and thus can be altered based on the in vitro or in vivo system used. This could consequently affect biological response from plasma treatment. Therefore, in this study, we investigated the DBD plasma behavior both in vitro (i.e. 96-well flat bottom plates, 96-well U-bottom plates, and 24-well flat bottom plates), and in vivo (i.e. mouse skin). Intensified charge coupled device (ICCD) imaging was performed and the plasma discharges were visually distinguishable between the different systems. The geometry of the wells did not affect DBD plasma generation for low application distances (≤ 2 mm), but differentially affected plasma uniformity on the bottom of the well at greater distances. Since DBD plasma treatment in vitro is rarely performed in dry wells for plasma medicine experiments, the effect of well wetness was also investigated. In all in vitro cases, the uniformity of the DBD plasma was affected when comparing wet versus dry wells, with the plasma in the wide-bottom wells appearing the most similar to plasma generated on mouse skin. Interestingly, based on quantification of ICCD images, the DBD plasma intensity per surface area demonstrated an exponential one-phase decay with increasing application distance, regardless of the in vitro or in vivo system. This trend is similar to that of the energy per pulse of plasma, which is used to determine the total plasma treatment energy for biological systems. Optical emission spectroscopy performed on the plasma revealed similar trends in radical species generation between the plastic well plates and mouse skin. Therefore, taken together, DBD plasma intensity per surface area may be a valuable parameter to be used as a simple method for in situ monitoring during biological treatment and active plasma treatment control, which can be applied for in vitro and in vivo systems.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001072607700001	Publication Date	2023-09-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0272-4324	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.6	Times cited		Open Access	Not_Open_Access
	Notes	This work was partially funded by the Research Foundation—Flanders (FWO) and supported by the following Grants: 12S9221N (A. L.), G044420N (A. L. and A. B.), and G033020N (A.B.). We would also like to thank several patrons, as part of this research was funded by donations from different donors, including Dedert Schilde vzw, Mr Willy Floren, and the Vereycken family. We would also like to acknowledge the support from the European Cooperation in Science & Technology (COST) Action on “Therapeutical applications of Cold Plasmas” (CA20114; PlasTHER).			Approved	Most recent IF: 3.6; 2023 IF: 2.355
	Call Number	PLASMANT @ plasmant @c:irua:200285			Serial	8970
Permanent link to this record



	Author	Ghasemitarei, M.; Ghorbi, T.; Yusupov, M.; Zhang, Y.; Zhao, T.; Shali, P.; Bogaerts, A.
	Title	Effects of Nitro-Oxidative Stress on Biomolecules: Part 1—Non-Reactive Molecular Dynamics Simulations			Type	A1 Journal Article
	Year	2023	Publication	Biomolecules	Abbreviated Journal	Biomolecules
	Volume	13	Issue	9	Pages	1371
	Keywords	A1 Journal Article; plasma medicine; reactive oxygen and; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	Plasma medicine, or the biomedical application of cold atmospheric plasma (CAP), is an expanding field within plasma research. CAP has demonstrated remarkable versatility in diverse biological applications, including cancer treatment, wound healing, microorganism inactivation, and skin disease therapy. However, the precise mechanisms underlying the effects of CAP remain incompletely understood. The therapeutic effects of CAP are largely attributed to the generation of reactive oxygen and nitrogen species (RONS), which play a crucial role in the biological responses induced by CAP. Specifically, RONS produced during CAP treatment have the ability to chemically modify cell membranes and membrane proteins, causing nitro-oxidative stress, thereby leading to changes in membrane permeability and disruption of cellular processes. To gain atomic-level insights into these interactions, non-reactive molecular dynamics (MD) simulations have emerged as a valuable tool. These simulations facilitate the examination of larger-scale system dynamics, including protein-protein and protein-membrane interactions. In this comprehensive review, we focus on the applications of non-reactive MD simulations in studying the effects of CAP on cellular components and interactions at the atomic level, providing a detailed overview of the potential of CAP in medicine. We also review the results of other MD studies that are not related to plasma medicine but explore the effects of nitro-oxidative stress on cellular components and are therefore important for a broader understanding of the underlying processes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001071356400001	Publication Date	2023-09-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2218-273X	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access	Not_Open_Access
	Notes	This research received no external funding.			Approved	Most recent IF: NA
	Call Number	PLASMANT @ plasmant @c:irua:200380			Serial	8958
Permanent link to this record