| Home | << 1 2 3 4 5 >> |
|
| Records | |||||
|---|---|---|---|---|---|
| Author | De Meyer, R.; Gorbanev, Y.; Ciocarlan, R.-G.; Cool, P.; Bals, S.; Bogaerts, A. | ||||
| Title | Importance of plasma discharge characteristics in plasma catalysis: Dry reforming of methane vs. ammonia synthesis | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Chemical Engineering Journal | Abbreviated Journal  |
Chemical Engineering Journal |
| Volume | 488 | Issue | Pages | 150838 | |
| Keywords | A1 Journal Article; Gas conversion Dry reforming of methane Ammonia Microdischarges Dielectric barrier discharge; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | Plasma catalysis is a rapidly growing field, often employing a packed-bed dielectric barrier discharge plasma reactor. Such dielectric barrier discharges are complex, especially when a packing material (e.g., a catalyst) is introduced in the discharge volume. Catalysts are known to affect the plasma discharge, though the underlying mechanisms influencing the plasma physics are not fully understood. Moreover, the effect of the catalysts on the plasma discharge and its subsequent effect on the overall performance is often overlooked. In this work, we deliberately design and synthesize catalysts to affect the plasma discharge in different ways. These Ni or Co alumina-based catalysts are used in plasma-catalytic dry reforming of methane and ammonia synthesis. Our work shows that introducing a metal to the dielectric packing can affect the plasma discharge, and that the distribution of the metal is crucial in this regard. Further, the altered discharge can greatly influence the overall performance. In an atmospheric pressure dielectric barrier discharge reactor, this apparently more uniform plasma yields a significantly better performance for ammonia synthesis compared to the more conventional filamentary discharge, while it underperforms in dry reforming of methane. This study stresses the importance of analyzing the plasma discharge in plasma catalysis experiments. We hope this work encourages a more critical view on the plasma discharge characteristics when studying various catalysts in a plasma reactor. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2024-03-30 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1385-8947 | ISBN | Additional Links | UA library record | |
| Impact Factor | 15.1 | Times cited | Open Access | ||
| Notes | This research was supported through long-term structural funding (Methusalem FFB15001C) and by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme with grant agreement No 810182 (SCOPE ERC Synergy project) and with grant agreement No 815128 (REALNANO). We acknowledge the practical contribution of Senne Van Doorslaer. | Approved | Most recent IF: 15.1; 2024 IF: 6.216 | ||
| Call Number | PLASMANT @ plasmant @c:irua:205154 | Serial | 9115 | ||
| Permanent link to this record | |||||
| Author | Maerivoet, S.; Tsonev, I.; Slaets, J.; Reniers, F.; Bogaerts, A. | ||||
| Title | Coupled multi-dimensional modelling of warm plasmas: Application and validation for an atmospheric pressure glow discharge in CO2/CH4/O2 | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Chemical Engineering Journal | Abbreviated Journal |
Chemical Engineering Journal |
| Volume | 492 | Issue | Pages | 152006 | |
| Keywords | A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | To support experimental research into gas conversion by warm plasmas, models should be developed to explain the experimental observations. These models need to describe all physical and chemical plasma properties in a coupled way. In this paper, we present a modelling approach to solve the complete set of assumed relevant equations, including gas flow, heat balance and species transport, coupled with a rather extensive chemistry set, consisting of 21 species, obtained by reduction of a more detailed chemistry set, consisting of 41 species. We apply this model to study the combined CO2 and CH4 conversion in the presence of O2, in a direct current atmospheric pressure glow discharge. Our model can predict the experimental trends, and can explain why higher O2 fractions result in higher CH4 conversion, namely due to the higher gas temperature, rather than just by additional chemical reactions. Indeed, our model predicts that when more O2 is added, the energy required to reach any set temperature (i.e., the enthalpy) drops, allowing the system to reach higher temperatures with similar amounts of energy. This is in turn related to the higher H2O fraction and lower H2 fraction formed in the plasma, as demonstrated by our model. Altogether, our new self-consistent model can capture the main physics and chemistry occurring in this warm plasma, which is an important step towards predictive modelling for plasma-based gas conversion. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2024-05-09 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1385-8947 | ISBN | Additional Links | ||
| Impact Factor | 15.1 | Times cited | Open Access | ||
| Notes | This research was supported by the Excellence of Science FWO-FNRS project (FWO grant ID G0I1822N; EOS ID 40007511) and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 810182–SCOPE ERC Synergy project, and grant agreement No. 101081162–PREPARE ERC Proof of Concept project). computational resources and services used in this work were provided by the HPC core facility CalcUA of the Universiteit Antwerpen, and VSC (Flemish Supercomputer Center), funded by the Research Foundation – Flanders (FWO) and the Flemish Government. | Approved | Most recent IF: 15.1; 2024 IF: 6.216 | ||
| Call Number | PLASMANT @ plasmant @ | Serial | 9132 | ||
| Permanent link to this record | |||||
| Author | Meng, S.; Li, S.; Sun, S.; Bogaerts, A.; Liu, Y.; Yi, Y. | ||||
| Title | NH3 decomposition for H2 production by thermal and plasma catalysis using bimetallic catalysts | Type | A1 Journal article | ||
| Year | 2024 | Publication | Chemical engineering science | Abbreviated Journal |
Chemical Engineering Science |
| Volume | 283 | Issue | Pages | 119449 | |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Plasma catalysis has emerged as a promising approach for driving thermodynamically unfavorable chemical reactions. Nevertheless, comprehending the mechanisms involved remains a challenge, leading to uncertainty about whether the optimal catalyst in plasma catalysis aligns with that in thermal catalysis. In this research, we explore this question by studying monometallic catalysts (Fe, Co, Ni and Mo) and bimetallic catalysts (Fe-Co, Mo- Co, Fe-Ni and Mo-Ni) in both thermal catalytic and plasma catalytic NH3 decomposition. Our findings reveal that the Fe-Co bimetallic catalyst exhibits the highest activity in thermal catalysis, the Fe-Ni bimetallic catalyst outperforms others in plasma catalysis, indicating a discrepancy between the optimal catalysts for the two catalytic modes in NH3 decomposition. Comprehensive catalyst characterization, kinetic analysis, temperature program surface reaction experiments and plasma diagnosis are employed to discuss the key factors influencing NH3 decomposition performance. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001105312500001 | Publication Date | 2023-10-28 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0009-2509 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.7 | Times cited | Open Access | Not_Open_Access | |
| Notes | Universiteit Antwerpen, 32249 ; National Natural Science Foundation of China, 21503032 ; PetroChina Innovation Foundation, 2018D-5007-0501 ; | Approved | Most recent IF: 4.7; 2024 IF: 2.895 | ||
| Call Number | PLASMANT @ plasmant @c:irua:201009 | Serial | 8967 | ||
| Permanent link to this record | |||||
| Author | Xu, W.; Van Alphen, S.; Galvita, V.V.; Meynen, V.; Bogaerts, A. | ||||
| Title | Effect of Gas Composition on Temperature and CO2Conversion in a Gliding Arc Plasmatron reactor: Insights for Post‐Plasma Catalysis from Experiments and Computation | Type | A1 Journal Article | ||
| Year | 2024 | Publication | ChemSusChem | Abbreviated Journal |
ChemSusChem |
| Volume | Issue | Pages | |||
| Keywords | A1 Journal Article; CO2 conversion · Plasma · Gliding arc plasmatron · Temperature profiles · Computational modelling; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | Plasma‐based CO<sub>2</sub>conversion has attracted increasing interest. However, to understand the impact of plasma operation on post‐plasma processes, we studied the effect of adding N<sub>2</sub>, N<sub>2</sub>/CH<sub>4</sub>and N<sub>2</sub>/CH<sub>4</sub>/H<sub>2</sub>O to a CO<sub>2</sub>gliding arc plasmatron (GAP) to obtain valuable insights into their impact on exhaust stream composition and temperature, which will serve as feed gas and heat for post‐plasma catalysis (PPC). Adding N<sub>2</sub>improves the CO<sub>2</sub>conversion from 4 % to 13 %, and CH<sub>4</sub>addition further promotes it to 44 %, and even to 61 % at lower gas flow rate (6 L/min), allowing a higher yield of CO and hydrogen for PPC. The addition of H<sub>2</sub>O, however, reduces the CO<sub>2</sub>conversion from 55 % to 22 %, but it also lowers the energy cost, from 5.8 to 3 kJ/L. Regarding the temperature at 4.9 cm post‐plasma, N<sub>2</sub>addition increases the temperature, while the CO<sub>2</sub>/CH<sub>4</sub>ratio has no significant effect on temperature. We also calculated the temperature distribution with computational fluid dynamics simulations. The obtained temperature profiles (both experimental and calculated) show a decreasing trend with distance to the exhaust and provide insights in where to position a PPC bed. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001200297300001 | Publication Date | 2024-04-11 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1864-5631 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 8.4 | Times cited | Open Access | ||
| Notes | We acknowledge the VLAIO Catalisti Moonshot project D2M and the VLAIO Catalisti transition project CO2PERATE (HBC.2017.0692) for financial support. We acknowledge Gilles Van Loon for his help to make the quartz and steel devices for the reactor. Vladimir V. Galvita also acknowledges a personal grant from the Research Fund of Ghent University (BOF; 01N16319). | Approved | Most recent IF: 8.4; 2024 IF: 7.226 | ||
| Call Number | PLASMANT @ plasmant @c:irua:205101 | Serial | 9128 | ||
| Permanent link to this record | |||||
| Author | Gorbanev, Y.; Fedirchyk, I.; Bogaerts, A. | ||||
| Title | Plasma catalysis in ammonia production and decomposition: Use it, or lose it? | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Current Opinion in Green and Sustainable Chemistry | Abbreviated Journal |
Current Opinion in Green and Sustainable Chemistry |
| Volume | 47 | Issue | Pages | 100916 | |
| Keywords | A1 Journal Article; Plasma Nitrogen fixation Ammonia Plasma catalysis Production and decomposition; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | The combination of plasma with catalysis for the synthesis and decomposition of NH3 is an attractive route to the production of carbon-neutral fertiliser and energy carriers and its conversion into H2. Recent years have seen fast developments in the field of plasma-catalytic NH3 life cycle. This work summarises the most recent advances in plasma-catalytic and related NH3-focussed processes, identifies some of the most important discoveries, and addresses plausible strategies for future developments in plasma-based NH3 technology. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2024-03-29 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2452-2236 | ISBN | Additional Links | ||
| Impact Factor | 9.3 | Times cited | Open Access | ||
| Notes | The work was supported by the Fund for Scientific Research (FWO) Flanders Bioeconomy project (grant G0G2322N) funded by the European Union-NextGe- nerationEU, the HyPACT project funded by the Belgian Energy Transition Fund, and the MSCA4Ukraine project 1233629 funded by the European Union. | Approved | Most recent IF: 9.3; 2024 IF: NA | ||
| Call Number | PLASMANT @ plasmant @ | Serial | 9117 | ||
| Permanent link to this record | |||||
| Author | Manaigo, F.; Rouwenhorst, K.; Bogaerts, A.; Snyders, R. | ||||
| Title | Feasibility study of a small-scale fertilizer production facility based on plasma nitrogen fixation | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Energy Conversion and Management | Abbreviated Journal |
Energy Conversion and Management |
| Volume | 302 | Issue | Pages | 118124 | |
| Keywords | A1 Journal Article; Plasma-based nitrogen fixation Haber-Bosch Feasibility study Fertilizer production; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001171038200001 | Publication Date | 2024-01-25 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0196-8904 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 10.4 | Times cited | Open Access | Not_Open_Access | |
| Notes | This research is supported by the FNRS-FWO project ‘‘NITROPLASM’’, EOS O005118F. The authors thank Dr. L. Hollevoet (KU Leuven) for the draft reviewing and for providing additional information on the lean NO???? trap. | Approved | Most recent IF: 10.4; 2024 IF: 5.589 | ||
| Call Number | PLASMANT @ plasmant @c:irua:204351 | Serial | 8992 | ||
| Permanent link to this record | |||||
| Author | Slaets, J.; Loenders, B.; Bogaerts, A. | ||||
| Title | Plasma-based dry reforming of CH4: Plasma effects vs. thermal conversion | Type | A1 Journal article | ||
| Year | 2024 | Publication | Fuel | Abbreviated Journal |
Fuel |
| Volume | 360 | Issue | Pages | 130650 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | In this work we evaluate the chemical kinetics of dry reforming of methane in warm plasmas (1000–4000 K) using modelling with a newly developed chemistry set, for a broad range of parameters (temperature, power density and CO2/CH4 ratio). We compare the model against thermodynamic equilibrium concentrations, serving as validation of the thermal chemical kinetics. Our model reveals that plasma-specific reactions (i.e., electron impact collisions) accelerate the kinetics compared to thermal conversion, rather than altering the overall kinetics pathways and intermediate products, for gas temperatures below 2000 K. For higher temperatures, the kinetics are dominated by heavy species collisions and are strictly thermal, with negligible influence of the electrons and ions on the overall kinetics. When studying the effects of different gas mixtures on the kinetics, we identify important intermediate species, side reactions and side products. The use of excess CO2 leads to H2O formation, at the expense of H2 formation, and the CO2 conversion itself is limited, only approaching full conversion near 4000 K. In contrast, full conversion of both reactants is only kinetically limited for mixtures with excess CH4, which also gives rise to the formation of C2H2, alongside syngas. Within the given parameter space, our model predicts the 30/70 ratio of CO2/CH4 to be the most optimal for syngas formation with a H2/CO ratio of 2. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001138077700001 | Publication Date | 2023-12-15 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0016-2361 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 7.4 | Times cited | Open Access | Not_Open_Access | |
| Notes | This research was supported by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement No. 810182 – SCOPE ERC Synergy project), the Catalisti-ICON project BluePlasma (Project No. HBC.2022.0445), the FWO-SBO project PlasMaCatDESIGN (FWO Grant ID S001619N), the Independent Research Fund Denmark (Project No. 0217-00231B) and through long-term structural funding (Methusalem). The computational resources and services used in this work were provided by the HPC core facility CalcUA of the Universiteit Antwerpen, and VSC (Flemish Supercomputer Center), funded by the Research Foundation – Flanders (FWO) and the Flemish Government. We also thank Bart Wanten, Roel Michiels, Pepijn Heirman, Claudia Verheyen, dr. Senne Van Alphen, dr. Elise Vervloessem, dr. Kevin van ’t Veer, dr. Joshua Boothroyd, dr. Omar Biondo and dr. Eduardo Morais for their expertise and feedback regarding the kinetics scheme. | Approved | Most recent IF: 7.4; 2024 IF: 4.601 | ||
| Call Number | PLASMANT @ plasmant @c:irua:201669 | Serial | 8973 | ||
| Permanent link to this record | |||||
| Author | Leinders, G.; Grendal, O.G.; Arts, I.; Bes, R.; Prozheev, I.; Orlat, S.; Fitch, A.; Kvashnina, K.; Verwerft, M. | ||||
| Title | Refinement of the uranium dispersion corrections from anomalous diffraction | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Journal of Applied Crystallography | Abbreviated Journal |
J Appl Cryst |
| Volume | 57 | Issue | 2 | Pages | 284-295 |
| Keywords | A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; | ||||
| Abstract | The evolution of the uranium chemical state in uranium compounds, principally in the oxides, is of concern in the context of nuclear fuel degradation under storage and repository conditions, and in accident scenarios. The U–O system shows complicated phase relations between single-valence uranium dioxide (UO<sub>2</sub>) and different mixed-valence compounds (<italic>e.g.</italic>U<sub>4</sub>O<sub>9</sub>, U<sub>3</sub>O<sub>7</sub>and U<sub>3</sub>O<sub>8</sub>). To try resolving the electronic structure associated with unique atomic positions, a combined application of diffraction and spectroscopic techniques, such as diffraction anomalous fine structure (DAFS), can be considered. Reported here is the application of two newly developed routines for assessing a DAFS data set, with the aim of refining the uranium X-ray dispersion corrections. High-resolution anomalous diffraction data were acquired from polycrystalline powder samples of UO<sub>2</sub>(containing tetravalent uranium) and potassium uranate (KUO<sub>3</sub>, containing pentavalent uranium) using synchrotron radiation in the vicinity of the U<italic>L</italic><sub>3</sub>edge (17.17 keV). Both routines are based on an iterative refinement of the dispersion corrections, but they differ in either using the intensity of a selection of reflections or doing a full-pattern (Rietveld method) refinement. The uranium dispersion corrections obtained using either method are in excellent agreement with each other, and they show in great detail the chemical shifts and differences in fine structure expected for tetravalent and pentavalent uranium. This approach may open new possibilities for the assessment of other, more complicated, materials such as mixed-valence compounds. Additionally, the DAFS methodology can offer a significant resource optimization because each data set contains both structural (diffraction) and chemical (spectroscopy) information, which can avoid the requirement to use multiple experimental stations at synchrotron sources. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001208800100008 | Publication Date | 2024-04-01 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1600-5767 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 6.1 | Times cited | Open Access | ||
| Notes | FPS Economy, SF-CORMOD; | Approved | Most recent IF: 6.1; 2024 IF: 2.495 | ||
| Call Number | EMAT @ emat @c:irua:206011 | Serial | 9127 | ||
| Permanent link to this record | |||||
| Author | Cai, Y.; Michiels, R.; De Luca, F.; Neyts, E.; Tu, X.; Bogaerts, A.; Gerrits, N. | ||||
| Title | Improving Molecule–Metal Surface Reaction Networks Using the Meta-Generalized Gradient Approximation: CO2Hydrogenation | Type | A1 Journal Article | ||
| Year | 2024 | Publication | The Journal of Physical Chemistry C | Abbreviated Journal |
J. Phys. Chem. C |
| Volume | 128 | Issue | 21 | Pages | 8611-8620 |
| Keywords | A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | Density functional theory is widely used to gain insights into molecule−metal surface reaction networks, which is important for a better understanding of catalysis. However, it is well-known that generalized gradient approximation (GGA) density functionals (DFs), most often used for the study of reaction networks, struggle to correctly describe both gas-phase molecules and metal surfaces. Also, GGA DFs typically underestimate reaction barriers due to an underestimation of the selfinteraction energy. Screened hybrid GGA DFs have been shown to reduce this problem but are currently intractable for wide usage. In this work, we use a more affordable meta-GGA (mGGA) DF in combination with a nonlocal correlation DF for the first time to study and gain new insights into a catalytically important surface reaction network, namely, CO2 hydrogenation on Cu. We show that the mGGA DF used, namely, rMS-RPBEl-rVV10, outperforms typical GGA DFs by providing similar or better predictions for metals and molecules, as well as molecule−metal surface adsorption and activation energies. Hence, it is a better choice for constructing molecule−metal surface reaction networks. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2024-05-30 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1932-7447 | ISBN | Additional Links | ||
| Impact Factor | 3.7 | Times cited | Open Access | ||
| Notes | H2020 Marie Sklodowska-Curie Actions, 813393 ; Fonds Wetenschappelijk Onderzoek, 1114921N ; H2020 European Research Council, 810182 ; Nederlandse Organisatie voor Wetenschappelijk Onderzoek, 019.202EN.012 ; | Approved | Most recent IF: 3.7; 2024 IF: 4.536 | ||
| Call Number | PLASMANT @ plasmant @ | Serial | 9248 | ||
| Permanent link to this record | |||||
| Author | Gerrits, N.; Jackson, B.; Bogaerts, A. | ||||
| Title | Accurate Reaction Probabilities for Translational Energies on Both Sides of the Barrier of Dissociative Chemisorption on Metal Surfaces | Type | A1 Journal Article | ||
| Year | 2024 | Publication | The Journal of Physical Chemistry Letters | Abbreviated Journal |
J. Phys. Chem. Lett. |
| Volume | 15 | Issue | 9 | Pages | 2566-2572 |
| Keywords | A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | Molecular dynamics simulations are essential for a better understanding of dissociative chemisorption on metal surfaces, which is often the rate-controlling step in heterogeneous and plasma catalysis. The workhorse quasi-classical trajectory approach ubiquitous in molecular dynamics is able to accurately predict reactivity only for high translational and low vibrational energies. In contrast, catalytically relevant conditions generally involve low translational and elevated vibrational energies. Existing quantum dynamics approaches are intractable or approximate as a result of the large number of degrees of freedom present in molecule−metal surface reactions. Here, we extend a ring polymer molecular dynamics approach to fully include, for the first time, the degrees of freedom of a moving metal surface. With this approach, experimental sticking probabilities for the dissociative chemisorption of methane on Pt(111) are reproduced for a large range of translational and vibrational energies by including nuclear quantum effects and employing full-dimensional simulations. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001177959900001 | Publication Date | 2024-03-07 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1948-7185 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 5.7 | Times cited | Open Access | ||
| Notes | Nick Gerrits has been financially supported through a Dutch Research Council (NWO) Rubicon grant (019.202EN.012). The computational resources and services used in this work were provided by the high performance computing (HPC) core facility CalcUA of the Universiteit Antwerpen and the Flemish Supercomputer Center (VSC) funded by the Research Foundation−Flanders (FWO) and the Flemish Government. The authors thank Mark Somers for useful discussions. | Approved | Most recent IF: 5.7; 2024 IF: 9.353 | ||
| Call Number | PLASMANT @ plasmant @c:irua:204818 | Serial | 9114 | ||
| Permanent link to this record | |||||
| Author | Heirman, P.; Verloy, R.; Baroen, J.; Privat-Maldonado, A.; Smits, E.; Bogaerts, A. | ||||
| Title | Liquid treatment with a plasma jet surrounded by a gas shield: effect of the treated substrate and gas shield geometry on the plasma effluent conditions | Type | A1 Journal article | ||
| Year | 2024 | Publication | Journal of physics: D: applied physics | Abbreviated Journal |
J. Phys. D: Appl. Phys. |
| Volume | 57 | Issue | 11 | Pages | 115204 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT); Center for Oncological Research (CORE) | ||||
| Abstract | The treatment of a well plate by an atmospheric pressure plasma jet is common for<italic>in vitro</italic>plasma medicine research. Here, reactive species are largely produced through the mixing of the jet effluent with the surrounding atmosphere. This mixing can be influenced not only by the ambient conditions, but also by the geometry of the treated well. To limit this influence and control the atmosphere, a shielding gas is sometimes applied. However, the interplay between the gas shield and the well geometry has not been investigated. In this work, we developed a 2D-axisymmetric computational fluid dynamics model of the kINPen plasma jet, to study the mixing of the jet effluent with the surrounding atmosphere, with and without gas shield. Our computational and experimental results show that the choice of well type can have a significant influence on the effluent conditions, as well as on the effectiveness of the gas shield. Furthermore, the geometry of the shielding gas device can substantially influence the mixing as well. Our results provide a deeper understanding of how the choice of setup geometry can influence the plasma treatment, even when all other operating parameters are unchanged. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001127372200001 | Publication Date | 2024-03-15 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0022-3727 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 3.4 | Times cited | Open Access | Not_Open_Access | |
| Notes | Fund for Scientific Research Flanders, 1100421N ; | Approved | Most recent IF: 3.4; 2024 IF: 2.588 | ||
| Call Number | PLASMANT @ plasmant @c:irua:201999 | Serial | 8977 | ||
| Permanent link to this record | |||||
| Author | Kelly, S.; Mercer, E.; Gorbanev, Y.; Fedirchyk, I.; Verheyen, C.; Werner, K.; Pullumbi, P.; Cowley, A.; Bogaerts, A. | ||||
| Title | Plasma-based conversion of martian atmosphere into life-sustaining chemicals: The benefits of utilizing martian ambient pressure | Type | A1 Journal article | ||
| Year | 2024 | Publication | Journal of CO2 utilization | Abbreviated Journal |
Journal of CO2 Utilization |
| Volume | 80 | Issue | Pages | 102668 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | We explored the potential of plasma-based In-Situ Resource Utilization (ISRU) for Mars through the conversion of Martian atmosphere (~96% CO2, 2% N2, and 2% Ar) into life-sustaining chemicals. As the Martian surface pressure is about 1% of the Earth’s surface pressure, it is an ideal environment for plasma-based gas conversion using microwave reactors. At 1000 W and 10 Ln/min (normal liters per minute), we produced ~76 g/h of O2 and ~3 g/h of NOx using a 2.45 GHz waveguided reactor at 25 mbar, which is ~3.5 times Mars ambient pressure. The energy cost required to produce O2 was ~0.013 kWh/g, which is very promising compared to recently concluded MOXIE experiments on the Mars surface. This marks a crucial step towards realizing the extension of human exploration. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001156084300001 | Publication Date | 2024-01-09 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2212-9820 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 7.7 | Times cited | Open Access | Not_Open_Access | |
| Notes | We acknowledge financial support by a European Space Agency (ESA) Open Science Innovation Platform study (contract no. 4000137001/21/NL/GLC/ov), the European Marie Skłodowska-Curie Individual Fellowship ‘‘PENFIX’’ within Horizon 2020 (grant no. 838181), the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program (grant no. 810182; SCOPE ERC Synergy project), the Excellence of Science FWOFNRS PLASyntH2 project (FWO grant no. G0I1822N and EOS no. 4000751) and the Methusalem project of the University of Antwerp. | Approved | Most recent IF: 7.7; 2024 IF: 4.292 | ||
| Call Number | PLASMANT @ plasmant @c:irua:202389 | Serial | 8986 | ||
| Permanent link to this record | |||||
| Author | Xu, W.; Buelens, L.C.; Galvita, V.V.; Bogaerts, A.; Meynen, V. | ||||
| Title | Improving the performance of gliding arc plasma-catalytic dry reforming via a new post-plasma tubular catalyst bed | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Journal of CO2 Utilization | Abbreviated Journal |
Journal of CO2 Utilization |
| Volume | 83 | Issue | Pages | 102820 | |
| Keywords | A1 Journal Article; Dry reforming Gliding arc plasma Plasma catalytic DRM Ni-based mixed oxide Post-plasma catalysis; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | A combination of a gliding arc plasmatron (GAP) reactor and a newly designed tubular catalyst bed (N-bed) was applied to investigate the post-plasma catalytic (PPC) effect for dry reforming of methane (DRM). As comparison, a traditional plasma catalyst bed (T-bed) was also utilized. The post-plasma catalytic effect of a Ni-based mixed oxide (Ni/MO) catalyst with a thermal catalytic performance of 77% CO2 and 86% CH4 conversion at 700 ℃ was studied. Although applying the T-bed had little effect on plasma based CO2 and CH4 conversion, an increase in selectivity to H2 was obtained with a maximum value of 89% at a distance of 2 cm. However, even when only α-Al2O3 packing material was used in the N-bed configuration, compared to the plasma alone and the T-bed, an increase of the CO2 and CH4 conversion from 53% and 53% to 69% and 69% to 83% was achieved. Addition of the Ni/MO catalyst further enhanced the DRM reaction, resulting in conversions of 79% for CO2 and 91% for CH4. Hence, although no insulation nor external heating was applied to the N-bed post plasma, it provides a slightly better conversion than the thermal catalytic performance with the same catalyst, while being fully electrically driven. In addition, an enhanced CO selectivity to 96% was obtained and the energy cost was reduced from ~ 6 kJ/L (plasma alone) to 4.3 kJ/L. To our knowledge, it is the first time that a post-plasma catalytic system achieves this excellent catalytic performance for DRM without extra external heating or insulation. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2024-05-25 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2212-9820 | ISBN | Additional Links | ||
| Impact Factor | 7.7 | Times cited | Open Access | ||
| Notes | Wencong Xu, Vladimir V. Galvita, Annemie Bogaerts, and Vera Meynen would like to acknowledge the VLAIO Catalisti Moonshot project D2M and the VLAIO Catalisti transition project CO2PERATE (HBC.2017.0692). Lukas C. Buelens acknowledges financial support from the Fund for Scientific Research Flanders (FWO Flanders) through a postdoctoral fellowship grant 12E5623N. Vladimir V. Galvita also acknowledges a personal grant from the Research Fund of Ghent University (BOF; 01N16319). | Approved | Most recent IF: 7.7; 2024 IF: 4.292 | ||
| Call Number | PLASMANT @ plasmant @ | Serial | 9131 | ||
| Permanent link to this record | |||||
| Author | Cai, Y.; Mei, D.; Chen, Y.; Bogaerts, A.; Tu, X. | ||||
| Title | Machine learning-driven optimization of plasma-catalytic dry reforming of methane | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Journal of Energy Chemistry | Abbreviated Journal |
Journal of Energy Chemistry |
| Volume | 96 | Issue | Pages | 153-163 | |
| Keywords | A1 Journal Article; Plasma catalysis Machine learning Process optimization Dry reforming of methane Syngas production; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | This study investigates the dry reformation of methane (DRM) over Ni/Al2O3 catalysts in a dielectric barrier discharge (DBD) non-thermal plasma reactor. A novel hybrid machine learning (ML) model is developed to optimize the plasma-catalytic DRM reaction with limited experimental data. To address the non-linear and complex nature of the plasma-catalytic DRM process, the hybrid ML model integrates three well-established algorithms: regression trees, support vector regression, and artificial neural networks. A genetic algorithm (GA) is then used to optimize the hyperparameters of each algorithm within the hybrid ML model. The ML model achieved excellent agreement with the experimental data, demonstrating its efficacy in accurately predicting and optimizing the DRM process. The model was subsequently used to investigate the impact of various operating parameters on the plasma-catalytic DRM performance. We found that the optimal discharge power (20 W), CO2/CH4 molar ratio (1.5), and Ni loading (7.8 wt%) resulted in the maximum energy yield at a total flow rate of 51 mL/min. Furthermore, we investigated the relative significance of each operating parameter on the performance of the plasmacatalytic DRM process. The results show that the total flow rate had the greatest influence on the conversion, with a significance exceeding 35% for each output, while the Ni loading had the least impact on the overall reaction performance. This hybrid model demonstrates a remarkable ability to extract valuable insights from limited datasets, enabling the development and optimization of more efficient and selective plasma-catalytic chemical processes. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2024-04-25 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2095-4956 | ISBN | Additional Links | ||
| Impact Factor | 13.1 | Times cited | Open Access | ||
| Notes | This project received funding from the European Union’s Hori- zon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 813393. | Approved | Most recent IF: 13.1; 2024 IF: 2.594 | ||
| Call Number | PLASMANT @ plasmant @ | Serial | 9124 | ||
| Permanent link to this record | |||||
| Author | Ding, L.; Zhao, M.; Ehlers, F.J.H.; Jia, Z.; Zhang, Z.; Weng, Y.; Schryvers, D.; Liu, Q.; Idrissi, H. | ||||
| Title | “Branched” structural transformation of the L12-Al3Zr phase manipulated by Cu substitution/segregation in the Al-Cu-Zr alloy system | Type | A1 Journal article | ||
| Year | 2024 | Publication | Journal of materials science & technology | Abbreviated Journal |
Journal of Materials Science & Technology |
| Volume | 185 | Issue | Pages | 186-206 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The effect of Cu on the evolution of the Al3Zr phase in an Al-Cu-Zr cast alloy during solution treatment at 500 °C has been thoroughly studied by combining atomic resolution high-angle annular dark-field scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy and first-principles cal- culations. The heat treatment initially produces a pure L12-Al3Zr microstructure, allowing for about 13 % Cu to be incorporated in the dispersoid. Cu incorporation increases the energy barrier for anti-phase boundary (APB) activation, thus stabilizing the L12 structure. Additional heating leads to a Cu-induced “branched”path for the L12 structural transformation, with the latter process accelerated once the first APB has been created. Cu atoms may either (i) be repelled by the APBs, promoting the transformation to a Cu-poor D023 phase, or (ii) they may segregate at one Al-Zr layer adjacent to the APB, promoting a transformation to a new thermodynamically favored phase, Al4CuZr, formed when these segregation layers are periodically arranged. Theoretical studies suggest that the branching of the L12 transformation path is linked to the speed at which an APB is created, with Cu attraction triggered by a comparatively slow process. This unexpected transformation behavior of the L12-Al3Zr phase opens a new path to understanding, and potentially regulating the Al3Zr dispersoid evolution for high temperature applications. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001154261100001 | Publication Date | 2023-12-24 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1005-0302 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 10.9 | Times cited | Open Access | Not_Open_Access | |
| Notes | This work was supported by the National Key Research and Development Program (No. 2020YFA0405900), the National Natural Science Foundation of China (Grant No. 52371111 and U2141215 ), the Natural Science Foundation of Jiangsu Province (No. BE2022159 ). We are grateful to the High Performance Computing Center of Nanjing Tech University for supporting the computational resources. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR- FNRS). | Approved | Most recent IF: 10.9; 2024 IF: 2.764 | ||
| Call Number | EMAT @ emat @c:irua:202392 | Serial | 8981 | ||
| Permanent link to this record | |||||
| Author | Faraji, F.; Neyts, E.C.; Milošević, M.V.; Peeters, F.M. | ||||
| Title | Capillary Condensation of Water in Graphene Nanocapillaries | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Nano Letters | Abbreviated Journal |
Nano Lett. |
| Volume | 24 | Issue | 18 | Pages | 5625-5630 |
| Keywords | A1 Journal Article; CMT | ||||
| Abstract | Recent experiments have revealed that the macroscopic Kelvin equation remains surprisingly accurate even for nanoscale capillaries. This phenomenon was so far explained by the oscillatory behavior of the solid−liquid interfacial free energy. We here demonstrate thermodynamic and capillarity inconsistencies with this explanation. After revising the Kelvin equation, we ascribe its validity at nanoscale confinement to the effect of disjoining pressure. To substantiate our hypothesis, we employed molecular dynamics simulations to evaluate interfacial heat transfer and wetting properties. Our assessments unveil a breakdown in a previously established proportionality between the work of adhesion and the Kapitza conductance at capillary heights below 1.3 nm, where the dominance of the work of adhesion shifts primarily from energy to entropy. Alternatively, the peak density of the initial water layer can effectively probe the work of adhesion. Unlike under bulk conditions, high confinement renders the work of adhesion entropically unfavorable. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2024-05-08 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1530-6984 | ISBN | Additional Links | ||
| Impact Factor | 10.8 | Times cited | Open Access | ||
| Notes | This work was supported by Research Foundation-Flanders (FWO, project No. G099219N). The computational resources used in this work were provided by the HPC core facility CalcUA of the University of Antwerp, and the Flemish Supercomputer Center (VSC), funded by FWO and the Flemish Government. | Approved | Most recent IF: 10.8; 2024 IF: 12.712 | ||
| Call Number | UA @ lucian @ | Serial | 9123 | ||
| Permanent link to this record | |||||
| Author | Tong, J.; Fu, Y.; Domaretskiy, D.; Della Pia, F.; Dagar, P.; Powell, L.; Bahamon, D.; Huang, S.; Xin, B.; Costa Filho, R.N.; Vega, L.F.; Grigorieva, I.V.; Peeters, F.M.; Michaelides, A.; Lozada-Hidalgo, M. | ||||
| Title | Control of proton transport and hydrogenation in double-gated graphene | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Nature | Abbreviated Journal |
Nature |
| Volume | 630 | Issue | 8017 | Pages | 619-624 |
| Keywords | A1 Journal Article; Condensed Matter Theory (CMT) ; | ||||
| Abstract | The basal plane of graphene can function as a selective barrier that is permeable to protons but impermeable to all ions and gases, stimulating its use in applications such as membranes, catalysis and isotope separation. Protons can chemically adsorb on graphene and hydrogenate it, inducing a conductor–insulator transition that has been explored intensively in graphene electronic devices. However, both processes face energy barriersand various strategies have been proposed to accelerate proton transport, for example by introducing vacancies, incorporating catalytic metalsor chemically functionalizing the lattice. But these techniques can compromise other properties, such as ion selectivity or mechanical stability. Here we show that independent control of the electric field,<italic>E</italic>, at around 1 V nm<sup>−1</sup>, and charge-carrier density,<italic>n</italic>, at around 1 × 10<sup>14</sup> cm<sup>−2</sup>, in double-gated graphene allows the decoupling of proton transport from lattice hydrogenation and can thereby accelerate proton transport such that it approaches the limiting electrolyte current for our devices. Proton transport and hydrogenation can be driven selectively with precision and robustness, enabling proton-based logic and memory graphene devices that have on–off ratios spanning orders of magnitude. Our results show that field effects can accelerate and decouple electrochemical processes in double-gated 2D crystals and demonstrate the possibility of mapping such processes as a function of<italic>E</italic>and<italic>n</italic>, which is a new technique for the study of 2D electrode–electrolyte interfaces. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2024-06-20 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0028-0836 | ISBN | Additional Links | ||
| Impact Factor | 64.8 | Times cited | Open Access | ||
| Notes | This work was supported by UKRI (EP/X017745: M.L.-H; EP/X035891: A.M.), the Directed Research Projects Program of the Research and Innovation Center for Graphene and 2D Materials at Khalifa University (RIC2D-D001: M.L.-H., L.F.V. and D.B.), The Royal Society (URF\R1\201515: M.L.-H.) and the European Research Council (101071937: A.M.). Part of this work was supported by the Flemish Science Foundation (FWO-Vl, G099219N). A.M. acknowledges access to the UK national high-performance computing service (ARCHER2). | Approved | Most recent IF: 64.8; 2024 IF: 40.137 | ||
| Call Number | CMT @ cmt @ | Serial | 9247 | ||
| Permanent link to this record | |||||
| Author | Lobato, I.; Friedrich, T.; Van Aert, S. | ||||
| Title | Deep convolutional neural networks to restore single-shot electron microscopy images | Type | A1 Journal article | ||
| Year | 2024 | Publication | N P J Computational Materials | Abbreviated Journal |
npj Comput Mater |
| Volume | 10 | Issue | 1 | Pages | 10 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Advanced electron microscopy techniques, including scanning electron microscopes (SEM), scanning transmission electron microscopes (STEM), and transmission electron microscopes (TEM), have revolutionized imaging capabilities. However, achieving high-quality experimental images remains a challenge due to various distortions stemming from the instrumentation and external factors. These distortions, introduced at different stages of imaging, hinder the extraction of reliable quantitative insights. In this paper, we will discuss the main sources of distortion in TEM and S(T)EM images, develop models to describe them, and propose a method to correct these distortions using a convolutional neural network. We validate the effectiveness of our method on a range of simulated and experimental images, demonstrating its ability to significantly enhance the signal-to-noise ratio. This improvement leads to a more reliable extraction of quantitative structural information from the images. In summary, our findings offer a robust framework to enhance the quality of electron microscopy images, which in turn supports progress in structural analysis and quantification in materials science and biology. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001138183000001 | Publication Date | 2024-01-09 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2057-3960 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | Times cited | Open Access | OpenAccess | ||
| Notes | This work was supported by the European Research Council (Grant 770887 PICOMETRICS to S.V.A.). The authors acknowledge financial support from the Research Foundation Flanders (FWO, Belgium) through project fundings (G034621N, G0A7723N and EOS 40007495). S.V.A. acknowledges funding from the University of Antwerp Research Fund (BOF). The authors thank Lukas Grünewald for data acquisition and support for Fig. 7. | Approved | Most recent IF: NA | ||
| Call Number | EMAT @ emat @c:irua:202714 | Serial | 8994 | ||
| Permanent link to this record | |||||
| Author | Zhou, R.; Neek-Amal, M.; Peeters, F.M.; Bai, B.; Sun, C. | ||||
| Title | Interlink between Abnormal Water Imbibition in Hydrophilic and Rapid Flow in Hydrophobic Nanochannels | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Physical Review Letters | Abbreviated Journal |
Phys. Rev. Lett. |
| Volume | 132 | Issue | 18 | Pages | 184001 |
| Keywords | A1 Journal Article; CMT | ||||
| Abstract | Nanoscale extension and refinement of the Lucas-Washburn model is presented with a detailed analysis of recent experimental data and extensive molecular dynamics simulations to investigate rapid water flow and water imbibition within nanocapillaries. Through a comparative analysis of capillary rise in hydrophilic nanochannels, an unexpected reversal of the anticipated trend, with an abnormal peak, of imbibition length below the size of 3 nm was discovered in hydrophilic nanochannels, surprisingly sharing the same physical origin as the well-known peak observed in flow rate within hydrophobic nanochannels. The extended imbibition model is applicable across diverse spatiotemporal scales and validated against simulation results and existing experimental data for both hydrophilic and hydrophobic | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2024-04-30 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0031-9007 | ISBN | Additional Links | ||
| Impact Factor | 8.6 | Times cited | 1 | Open Access | |
| Notes | We gratefully acknowledge the financial support pro- vided by the National Natural Science Foundation of China (Projects No. 52488201 and No. 52222606). Part of this project was supported by the Flemish Science Foundations (FWO-Vl) and the Iranian National Science Foundation (No. 4025061 and No. 4021261). | Approved | Most recent IF: 8.6; 2024 IF: 8.462 | ||
| Call Number | UA @ lucian @ | Serial | 9122 | ||
| Permanent link to this record | |||||
| Author | Morais, E.; Bogaerts, A. | ||||
| Title | Modelling the dynamics of hydrogen synthesis from methane in nanosecond‐pulsed plasmas | Type | A1 Journal article | ||
| Year | 2024 | Publication | Plasma processes and polymers | Abbreviated Journal |
Plasma Processes & Polymers |
| Volume | 21 | Issue | 1 | Pages | |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | A chemical kinetics model was developed to characterise the gas‐phase dynamics of H<sub>2</sub>production in nanosecond‐pulsed CH<sub>4</sub>plasmas. Pulsed behaviour was observed in the calculated electric field, electron temperature and species densities at all pressures. The model agrees reasonably with experimental results, showing CH<sub>4</sub>conversion at 30% and C<sub>2</sub>H<sub>2</sub>and H<sub>2</sub>as major products. The underlying mechanisms in CH<sub>4</sub>dissociation and H<sub>2</sub>formation were analysed, highlighting the large contribution of vibrationally excited CH<sub>4</sub>and H<sub>2</sub>to coupling energy from the plasma into gas‐phase heating, and revealing that H<sub>2</sub>synthesis is not affected by applied pressure, with selectivity remaining unchanged at ~42% in the 1–5 bar range. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001091258700001 | Publication Date | 2023-10-27 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.5 | Times cited | Open Access | Not_Open_Access | |
| Notes | We gratefully acknowledge financial support by the Flemish Government through the Moonshot cSBO project “Power‐to‐Olefins” (P2O; HBC.2020.2620) and funding from the Independent Research Fund Denmark (project nr. 0217‐00231B). | Approved | Most recent IF: 3.5; 2024 IF: 2.846 | ||
| Call Number | PLASMANT @ plasmant @c:irua:201192 | Serial | 8983 | ||
| Permanent link to this record | |||||
| Author | Bissonnette-Dulude, J.; Heirman, P.; Coulombe, S.; Bogaerts, A.; Gervais, T.; Reuter, S. | ||||
| Title | Coupling the COST reference plasma jet to a microfluidic device: a computational study | Type | A1 Journal article | ||
| Year | 2024 | Publication | Plasma sources science and technology | Abbreviated Journal |
Plasma Sources Sci. Technol. |
| Volume | 33 | Issue | 1 | Pages | 015001 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | The use of microfluidic devices in the field of plasma-liquid interaction can unlock unique possibilities to investigate the effects of plasma-generated reactive species for environmental and biomedical applications. So far, very little simulation work has been performed on microfluidic devices in contact with a plasma source. We report on the modelling and computational simulation of physical and chemical processes taking place in a novel plasma-microfluidic platform. The main production and transport pathways of reactive species both in plasma and liquid are modelled by a novel modelling approach that combines 0D chemical kinetics and 2D transport mechanisms. This combined approach, applicable to systems where the transport of chemical species occurs in unidirectional flows at high Péclet numbers, decreases calculation times considerably compared to regular 2D simulations. It takes advantage of the low computational time of the 0D reaction models while providing spatial information through multiple plug-flow simulations to yield a quasi-2D model. The gas and liquid flow profiles are simulated entirely in 2D, together with the chemical reactions and transport of key chemical species. The model correctly predicts increased transport of hydrogen peroxide into the liquid when the microfluidic opening is placed inside the plasma effluent region, as opposed to inside the plasma region itself. Furthermore, the modelled hydrogen peroxide production and transport in the microfluidic liquid differs by less than 50% compared with experimental results. To explain this discrepancy, the limits of the 0D–2D combined approach are discussed. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001136607100001 | Publication Date | 2024-01-01 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0963-0252 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 3.8 | Times cited | Open Access | Not_Open_Access | |
| Notes | Natural Sciences and Engineering Research Council of Canada, RGPIN-06820 ; FWO, 1100421N ; McGill University, the TransMedTech Institute; | Approved | Most recent IF: 3.8; 2024 IF: 3.302 | ||
| Call Number | PLASMANT @ plasmant @c:irua:202783 | Serial | 8990 | ||
| Permanent link to this record | |||||
| Author | Albrechts, M.; Tsonev, I.; Bogaerts, A. | ||||
| Title | Investigation of O atom kinetics in O2plasma and its afterglow | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Plasma Sources Science and Technology | Abbreviated Journal |
Plasma Sources Sci. Technol. |
| Volume | 33 | Issue | 4 | Pages | 045017 |
| Keywords | A1 Journal Article; oxygen plasma, pseudo-1D plug-flow kinetic model, O atoms, low-pressure validation, atmospheric pressure microwave torch; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | We have developed a comprehensive kinetic model to study the O atom kinetics in an O<sub>2</sub>plasma and its afterglow. By adopting a pseudo-1D plug-flow formalism within the kinetic model, our aim is to assess how far the O atoms travel in the plasma afterglow, evaluating its potential as a source of O atoms for post-plasma gas conversion applications. Since we could not find experimental data for pure O<sub>2</sub>plasma at atmospheric pressure, we first validated our model at low pressure (1–10 Torr) where very good experimental data are available. Good agreement between our model and experiments was achieved for the reduced electric field, gas temperature and the densities of the dominant neutral species, i.e. O<sub>2</sub>(a), O<sub>2</sub>(b) and O. Subsequently, we confirmed that the chemistry set is consistent with thermodynamic equilibrium calculations at atmospheric pressure. Finally, we investigated the O atom densities in the O<sub>2</sub>plasma and its afterglow, for which we considered a microwave O<sub>2</sub>plasma torch, operating at a pressure between 0.1 and 1 atm, for a flow rate of 20 slm and an specific energy input of 1656 kJ mol<sup>−1</sup>. Our results show that for both pressure conditions, a high dissociation degree of ca. 92% is reached within the discharge. However, the O atoms travel much further in the plasma afterglow for<italic>p</italic>= 0.1 atm (9.7 cm) than for<italic>p</italic>= 1 atm (1.4 cm), attributed to the longer lifetime (3.8 ms at 0.1 atm vs 1.8 ms at 1 atm) resulting from slower three-body recombination kinetics, as well as a higher volumetric flow rate. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001209453500001 | Publication Date | 2024-04-01 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0963-0252 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 3.8 | Times cited | Open Access | ||
| Notes | This research was supported by the Horizon Europe Framework Program ‘Research and Innovation Actions’ (RIA), Project CANMILK (Grant No. 101069491). | Approved | Most recent IF: 3.8; 2024 IF: 3.302 | ||
| Call Number | PLASMANT @ plasmant @c:irua:205920 | Serial | 9125 | ||
| Permanent link to this record | |||||
| Author | Faraji, F.; Neyts, E.C.; Milošević, M.V.; Peeters, F.M. | ||||
| Title | Comment on “Misinterpretation of the Shuttleworth equation” | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Scripta Materialia | Abbreviated Journal |
Scripta Materialia |
| Volume | 250 | Issue | Pages | 116186 | |
| Keywords | A1 Journal Article; CMT | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2024-05-24 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462 | ISBN | Additional Links | ||
| Impact Factor | 6 | Times cited | Open Access | ||
| Notes | Research Foundation Flanders; | Approved | Most recent IF: 6; 2024 IF: 3.747 | ||
| Call Number | UA @ lucian @ CMT | Serial | 9116 | ||
| Permanent link to this record | |||||
| Author | Hofer, C.; Gao, C.; Chennit, T.; Yuan, B.; Pennycook, T.J. | ||||
| Title | Phase offset method of ptychographic contrast reversal correction | Type | A1 Journal article | ||
| Year | 2024 | Publication | Ultramicroscopy | Abbreviated Journal |
Ultramicroscopy |
| Volume | Issue | Pages | 113922 | ||
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001164447000001 | Publication Date | 2024-01-08 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0304-3991 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 2.2 | Times cited | Open Access | Not_Open_Access | |
| Notes | FWO, G013122N ; Horizon 2020 Framework Programme; European Research Council, 802123-HDEM ; European Research Council; | Approved | Most recent IF: 2.2; 2024 IF: 2.843 | ||
| Call Number | EMAT @ emat @c:irua:202379 | Serial | 8988 | ||
| Permanent link to this record | |||||
| Author | Şentürk, DG.; Yu, CP.; De Backer, A.; Van Aert, S. | ||||
| Title | Atom counting from a combination of two ADF STEM images | Type | A1 Journal article | ||
| Year | 2024 | Publication | Ultramicroscopy | Abbreviated Journal |
Ultramicroscopy |
| Volume | 255 | Issue | Pages | 113859 | |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | To understand the structure–property relationship of nanostructures, reliably quantifying parameters, such as the number of atoms along the projection direction, is important. Advanced statistical methodologies have made it possible to count the number of atoms for monotype crystalline nanoparticles from a single ADF STEM image. Recent developments enable one to simultaneously acquire multiple ADF STEM images. Here, we present an extended statistics-based method for atom counting from a combination of multiple statistically independent ADF STEM images reconstructed from non-overlapping annular detector collection regions which improves the accuracy and allows one to retrieve precise atom-counts, especially for images acquired with low electron doses and multiple element structures. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001089064200001 | Publication Date | 2023-09-23 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0304-3991 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.2 | Times cited | Open Access | OpenAccess | |
| Notes | This work was supported by the European Research Council (Grant 770887 PICOMETRICS to S. Van Aert). The authors acknowledge financial support from the Research Foundation Flanders (FWO, Belgium) through project fundings (G034621N, G0A7723N, and EOS 40007495) and a postdoctoral grant to A. De Backer. S. Van Aert acknowledges funding from the University of Antwerp Research fund (BOF). | Approved | Most recent IF: 2.2; 2024 IF: 2.843 | ||
| Call Number | EMAT @ emat @c:irua:201008 | Serial | 8964 | ||
| Permanent link to this record | |||||
| Author | Şentürk, D.G.; De Backer, A.; Van Aert, S. | ||||
| Title | Element specific atom counting for heterogeneous nanostructures: Combining multiple ADF STEM images for simultaneous thickness and composition determination | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Ultramicroscopy | Abbreviated Journal |
Ultramicroscopy |
| Volume | 259 | Issue | Pages | 113941 | |
| Keywords | A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; | ||||
| Abstract | In this paper, a methodology is presented to count the number of atoms in heterogeneous nanoparticles based on the combination of multiple annular dark field scanning transmission electron microscopy (ADF STEM) images. The different non-overlapping annular detector collection regions are selected based on the principles of optimal statistical experiment design for the atom-counting problem. To count the number of atoms, the total intensities of scattered electrons for each atomic column, the so-called scattering cross-sections, are simultaneously compared with simulated library values for the different detector regions by minimising the squared differences. The performance of the method is evaluated for simulated Ni@Pt and Au@Ag core-shell nanoparticles. Our approach turns out to be a dose efficient alternative for the investigation of beam-sensitive heterogeneous materials as compared to the combination of ADF STEM and energy dispersive X-ray spectroscopy. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2024-02-19 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0304-3991 | ISBN | Additional Links | UA library record | |
| Impact Factor | 2.2 | Times cited | Open Access | OpenAccess | |
| Notes | This work was supported by the European Research Council (Grant 770887 PICOMETRICS to S. Van Aert). The authors acknowledge financial support from the Research Foundation Flanders (FWO, Belgium) through project fundings (G.0346.21N, GOA7723N, and EOS 40007495) and a postdoctoral grant to A. De Backer. S. Van Aert acknowledges funding from the University of Antwerp Research fund (BOF). | Approved | Most recent IF: 2.2; 2024 IF: 2.843 | ||
| Call Number | EMAT @ emat @c:irua:204353 | Serial | 8996 | ||
| Permanent link to this record | |||||