NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	1–30 of 40 records found matching your query (RSS):

Select All Deselect All

<< 1 2 >>

List View

Citations

Details

	Records
	Author	Leroux, F.; Bladt, E.; Timmermans, J.-P.; Van Tendeloo, G.; Bals, S.
	Title	Annular dark-field transmission electron microscopy for low contrast materials			Type	A1 Journal article
	Year	2013	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	19	Issue	3	Pages	629-634
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Imaging soft matter by transmission electron microscopy (TEM) is anything but straightforward. Recently, interest has grown in developing alternative imaging modes that generate contrast without additional staining. Here, we present a dark-field TEM technique based on the use of an annular objective aperture. Our experiments demonstrate an increase in both contrast and signal-to-noise ratio in comparison to conventional bright-field TEM. The proposed technique is easy to implement and offers an alternative imaging mode to investigate soft matter.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000319126300014	Publication Date	2013-04-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	5	Open Access
	Notes	262348 Esmi; Fwo G002410n G018008			Approved	Most recent IF: 1.891; 2013 IF: 2.161
	Call Number	UA @ lucian @ c:irua:108712			Serial	133
Permanent link to this record



	Author	Verlinden, G.; Gijbels, R.; Geuens, I.
	Title	Chemical microcharacterization of ultrathin iodide conversion layers and adsorbed thiocyanate surface layers on silver halide microcrystals with time-of-flight SIMS			Type	A1 Journal article
	Year	2002	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	8	Issue	3	Pages	216-226
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The technique of imaging time-of-flight secondary ion mass spectrometry (TOF-SIMS) and dual beam depth,profiling has been used to study the composition of the surface of tabular silver halide microcrystals. Analysis of individual microcrystals with a size well below 1 mum from a given emulsion is possible. The method is successfully applied for the characterization of silver halide microcrystals with subpercent global iodide concentrations confined in surface layers with a thickness below 5 nm. The developed TOF-SIMS analytical procedure is explicitly demonstrated for the molecular imaging of adsorbed thiocyanate layers (SCN) at crystal surfaces of individual crystals and for the differentiation of iodide conversion layers synthesized with KI and with AgI micrates (nanocrystals with a size between 10 and 50 nm). It can be concluded that TOF-SIMS as a microanalytical, surface-sensitive technique has some unique properties over other analytical techniques for the study of complex structured surface layers of silver halide microcrystals. This offers valuable information to support the synthesis of future photographic emulsions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000179055900007	Publication Date	2002-11-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	1	Open Access
	Notes				Approved	Most recent IF: 1.891; 2002 IF: 1.733
	Call Number	UA @ lucian @ c:irua:103876			Serial	349
Permanent link to this record



	Author	Bach, D.; Störmer, H.; Schneider, R.; Gerthsen, D.; Verbeeck, J.
	Title	EELS investigations of different niobium oxide phases			Type	A1 Journal article
	Year	2006	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	12	Issue	5	Pages	416-423
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Electron energy loss spectra in conjunction with near-edge fine structures of purely stoichiometric niobium monoxide (NbO) and niobium pentoxide (Nb2O5) reference materials were recorded. The structures of the niobium oxide reference materials were checked by selected area electron diffraction to ensure a proper assignment of the fine structures. NbO and Nb2O5 show clearly different energy loss near-edge fine structures of the Nb-M-4,M-5 and -M-2,M-3 edges and of the O-K edge, reflecting the specific local environments of the ionized atoms. To distinguish the two oxides in a quantitative manner, the intensities under the Nb-M-4,M-5 as well as Nb-M-2,M-3 edges and the O-K edge were measured and their ratios calculated. k-factors were also derived from these measurements.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000241181400007	Publication Date	2006-09-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	50	Open Access
	Notes				Approved	Most recent IF: 1.891; 2006 IF: 2.108
	Call Number	UA @ lucian @ c:irua:60979UA @ admin @ c:irua:60979			Serial	789
Permanent link to this record



	Author	Bach, D.; Schneider, R.; Gerthsen, D.; Verbeeck, J.; Sigle, W.
	Title	EELS of niobium and stoichiometric niobium-oxide phases: part 1: plasmon and Near-edges fine structure			Type	A1 Journal article
	Year	2009	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	15	Issue	6	Pages	505-523
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A comprehensive electron energy-loss spectroscopy study of niobium (Nb) and stable Nb-oxide phases (NbO, NbO2, Nb2O5) was carried out. In this work (Part I), the plasmons and energy-loss near-edge structures (ELNES) of all relevant Nb edges (Nb-N2,3, Nb-M4,5, Nb-M2,3, Nb-M1, and Nb-L2,3) up to energy losses of about 2600 eV and the O-K edge are analyzed with respect to achieving characteristic fingerprints of Nb in different formal oxidation states (0 for metallic Nb, +2 for NbO, +4 for NbO2, and +5 for Nb2O5). Chemical shifts of the Nb-N2,3, Nb-M4,5, Nb-M2,3, and Nb-L2,3 edges are extracted from the spectra that amount to about 4 eV as the oxidation state increases from 0 for Nb to +5 for Nb2O5. Four different microscopes, including a 200 keV ZEISS Libra with monochromator, were used. The corresponding wide range of experimental parameters with respect to the primary electron energy, convergence, and collection semi-angles as well as energy resolution allows an assessment of the influence of the experimental setup on the ELNES of the different edges. Finally, the intensity of the Nb-L2,3 white-line edges is correlated with niobium 4d-state occupancy in the different reference materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000272433200005	Publication Date	2009-10-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	55	Open Access
	Notes				Approved	Most recent IF: 1.891; 2009 IF: 3.035
	Call Number	UA @ lucian @ c:irua:80320UA @ admin @ c:irua:80320			Serial	790
Permanent link to this record



	Author	van den Broek, W.; Van Aert, S.; van Dyck, D.
	Title	Fully automated measurement of the modulation transfer function of charge-coupled devices above the Nyquist frequency			Type	A1 Journal article
	Year	2012	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	18	Issue	2	Pages	336-342
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	The charge-coupled devices used in electron microscopy are coated with a scintillating crystal that gives rise to a severe modulation transfer function (MTF). Exact knowledge of the MTF is imperative for a good correspondence between image simulation and experiment. We present a practical method to measure the MTF above the Nyquist frequency from the beam blocker's shadow image. The image processing has been fully automated and the program is made public. The method is successfully tested on three cameras with various beam blocker shapes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000302084700011	Publication Date	2012-02-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	15	Open Access
	Notes	Fwo			Approved	Most recent IF: 1.891; 2012 IF: 2.495
	Call Number	UA @ lucian @ c:irua:96557			Serial	1297
Permanent link to this record



	Author	Bals, S.; Tirry, W.; Geurts, R.; Yang, Z.; Schryvers, D.
	Title	High-quality sample preparation by low kV FIB thinning for analytical TEM measurements			Type	A1 Journal article
	Year	2007	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	13	Issue	2	Pages	80-86
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Focused ion beam specimen preparation has been used for NiTi samples and SrTiO(3)/SrRuO(3) multilayers with prevention of surface amorphization and Ga implantation by a 2-kV cleaning procedure. Transmission electron microscopy techniques show that the samples are of high quality with a controlled thickness over large scales. Furthermore, preferential thinning effects in multicompounds are avoided, which is important when analytical transmission electron microscopy measurements need to be interpreted in a quantitative manner. The results are compared to similar measurements acquired for samples obtained using conventional preparation techniques such as electropolishing for alloys and ion milling for oxides.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000245662200002	Publication Date	2007-03-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	82	Open Access
	Notes	Fwo; Goa			Approved	Most recent IF: 1.891; 2007 IF: 1.941
	Call Number	UA @ lucian @ c:irua:65850			Serial	1441
Permanent link to this record



	Author	Lu, J.; Roeffaers, M.B.J.; Bartholomeeusen, E.; Sels, B.F.; Schryvers, D.
	Title	Intergrowth of components and ramps in coffin-shaped ZSM-5 zeolite crystals unraveled by focused ion beam-assisted transmission electron microscopy			Type	A1 Journal article
	Year	2014	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	20	Issue	1	Pages	42-49
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Scanning electron microscopy, focused ion beam (FIB), and transmission electron microscopy are combined to study the intergrowth of 90 degrees rotational components and of ramps in coffin-shaped ZSM-5 crystals. The 90 degrees rotational boundaries with local zig-zag features between different intergrowth components are observed in the main part of crystal. Also a new kind of displacement boundary is described. At the displacement boundary there is a shift of the unit cells along the boundary without a change in orientation. Based on lamellae prepared with FIB from different positions of the ramps and crystal, the orientation relationships between ramps and the main part of the crystal are studied and the three-dimensional morphology and growth mechanism of the ramp are illustrated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000335378400006	Publication Date	2013-11-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	7	Open Access
	Notes				Approved	Most recent IF: 1.891; 2014 IF: 1.877
	Call Number	UA @ lucian @ c:irua:117688			Serial	1697
Permanent link to this record



	Author	Tian, H.; Schryvers, D.; Shabalovskaya, S.; van Humbeeck, J.
	Title	Microstructure of surface and subsurface layers of a Ni-Ti shape memory microwire			Type	A1 Journal article
	Year	2009	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	15	Issue		Pages	62-70
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The microstructure of a 55 Êm diameter, cold-worked Ni-Ti microwire is investigated by different transmission electron microscopy techniques. The surface consists of a few hundred nanometer thick oxide layer composed of TiO and TiO2 with a small fraction of inhomogeneously distributed Ni. The interior of the wire has a core-shell structure with primarily B2 grains in the 1 Êm thick shell, and heavily twinned B19 martensite in the core. This core-shell structure can be explained by a concentration gradient of the alloying elements resulting in a structure separation due to the strong temperature dependence of the martensitic start temperature. Moreover, in between the B2 part of the metallic core-shell and the oxide layer, a Ni3Ti interfacial layer is detected.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000262912700009	Publication Date	2009-01-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	15	Open Access
	Notes	FWO G.0465.05; Multimat			Approved	Most recent IF: 1.891; 2009 IF: 3.035
	Call Number	UA @ lucian @ c:irua:72319			Serial	2074
Permanent link to this record



	Author	Grieten, E.; Caen, J.; Schryvers, D.
	Title	Optimal sample preparation to characterize corrosion in historical photographs with analytical TEM			Type	A1 Journal article
	Year	2014	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	20	Issue	5	Pages	1585-1590
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Antwerp Cultural Heritage Sciences (ARCHES)
	Abstract	An alternative focused ion beam preparation method is used for sampling historical photographs containing metallic nanoparticles in a polymer matrix. We use the preparation steps of classical ultra-microtomy with an alternative final sectioning with a focused ion beam. Transmission electron microscopy techniques show that the lamella has a uniform thickness, which is an important factor for analytical transmission electron microscopy. Furthermore, the method maintains the spatial distribution of nanoparticles in the soft matrix. The results are compared with traditional preparation techniques such as ultra-microtomy and classical focused ion beam milling.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000345742900031	Publication Date	2014-09-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited		Open Access
	Notes				Approved	Most recent IF: 1.891; 2014 IF: 1.877
	Call Number	UA @ lucian @ c:irua:118481			Serial	2484
Permanent link to this record



	Author	van Dyck, D.; Van Aert, S.; den Dekker, A.J.
	Title	Physical limits on atomic resolution			Type	A1 Journal article
	Year	2004	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	10	Issue		Pages	153-157
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000188882100022	Publication Date	2004-08-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	14	Open Access
	Notes				Approved	Most recent IF: 1.891; 2004 IF: 2.389
	Call Number	UA @ lucian @ c:irua:47515			Serial	2616
Permanent link to this record



	Author	Idrissi, H.; Turner, S.; Mitsuhara, M.; Wang, B.; Hata, S.; Coulombier, M.; Raskin, J.-P.; Pardoen, T.; Van Tendeloo, G.; Schryvers, D.
	Title	Point defect clusters and dislocations in FIB irradiated nanocrystalline aluminum films : an electron tomography and aberration-corrected high-resolution ADF-STEM study			Type	A1 Journal article
	Year	2011	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	17	Issue	6	Pages	983-990
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Focused ion beam (FIB) induced damage in nanocrystalline Al thin films has been characterized using advanced transmission electron microscopy techniques. Electron tomography was used to analyze the three-dimensional distribution of point defect clusters induced by FIB milling, as well as their interaction with preexisting dislocations generated by internal stresses in the Al films. The atomic structure of interstitial Frank loops induced by irradiation, as well as the core structure of Frank dislocations, has been resolved with aberration-corrected high-resolution annular dark-field scanning TEM. The combination of both techniques constitutes a powerful tool for the study of the intrinsic structural properties of point defect clusters as well as the interaction of these defects with preexisting or deformation dislocations in irradiated bulk or nanostructured materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000297832300018	Publication Date	2011-10-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	25	Open Access
	Notes	Iap; Fwo			Approved	Most recent IF: 1.891; 2011 IF: 3.007
	Call Number	UA @ lucian @ c:irua:93627			Serial	2653
Permanent link to this record



	Author	Jinschek, J.R.; Bals, S.; Gopal, V.; Xus, X.; Kisielowski, C.
	Title	Probing local stoichiometry in InGaN based quantum wells of solid-state LEDs			Type	A3 Journal article
	Year	2004	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	10	Issue	S:2	Pages	294-295
	Keywords	A3 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	2008-01-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record
	Impact Factor	1.891	Times cited		Open Access
	Notes				Approved	Most recent IF: 1.891; 2004 IF: 2.389
	Call Number	UA @ lucian @ c:irua:87599			Serial	2714
Permanent link to this record



	Author	Bals, S.; Radmilovic, V.; Kisielowski, C.
	Title	TEM annular objective apertures fabricated by FIB			Type	A1 Journal article
	Year	2004	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	10	Issue	S:2	Pages	1148-1149
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos		Publication Date	2008-01-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record
	Impact Factor	1.891	Times cited		Open Access
	Notes				Approved	Most recent IF: 1.891; 2004 IF: 2.389
	Call Number	UA @ lucian @ c:irua:87603			Serial	3475
Permanent link to this record



	Author	Ke, X.; Bals, S.; Cott, D.; Hantschel, T.; Bender, H.; Van Tendeloo, G.
	Title	Three-dimensional analysis of carbon nanotube networks in interconnects by electron tomography without missing wedge artifacts			Type	A1 Journal article
	Year	2010	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	16	Issue	2	Pages	210-217
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The three-dimensional (3D) distribution of carbon nanotubes (CNTs) grown inside semiconductor contact holes is studied by electron tomography. The use of a specialized tomography holder results in an angular tilt range of ±90°, which means that the so-called missing wedge is absent. The transmission electron microscopy (TEM) sample for this purpose consists of a micropillar that is prepared by a dedicated procedure using the focused ion beam (FIB) but keeping the CNTs intact. The 3D results are combined with energy dispersive X-ray spectroscopy (EDS) to study the relation between the CNTs and the catalyst particles used during their growth. The reconstruction, based on the full range of tilt angles, is compared with a reconstruction where a missing wedge is present. This clearly illustates that the missing wedge will lead to an unreliable interpretation and will limit quantitative studies
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000276137200011	Publication Date	2010-02-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	42	Open Access
	Notes	Esteem 026019; Fwo; Iap-Vi			Approved	Most recent IF: 1.891; 2010 IF: 3.259
	Call Number	UA @ lucian @ c:irua:82279			Serial	3642
Permanent link to this record



	Author	Bals, S.; Kisielowski, C.; Croitoru, M.; Van Tendeloo, G.
	Title	Tomography using annular dark field imaging in TEM			Type	A3 Journal article
	Year	2005	Publication	Microscopy and microanalysis	Abbreviated Journal
	Volume	11	Issue	S	Pages	2118-2119
	Keywords	A3 Journal article; Condensed Matter Theory (CMT); Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:54880			Serial	3672
Permanent link to this record



	Author	Gjorgievska, E.; Van Tendeloo, G.; Nicholson, J.W.; Coleman, N.J.; Slipper, I.J.; Booth, S.
	Title	The incorporation of nanoparticles into conventional glass-ionomer dental restorative cements			Type	A1 Journal article
	Year	2015	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	21	Issue	21	Pages	392-406
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Conventional glass-ionomer cements (GICs) are popular restorative materials, but their use is limited by their relatively low mechanical strength. This paper reports an attempt to improve these materials by incorporation of 10 wt% of three different types of nanoparticles, aluminum oxide, zirconium oxide, and titanium dioxide, into two commercial GICs (ChemFil((R)) Rock and EQUIA (TM) Fil). The results indicate that the nanoparticles readily dispersed into the cement matrix by hand mixing and reduced the porosity of set cements by filling the empty spaces between the glass particles. Both cements showed no significant difference in compressive strength with added alumina, and ChemFil((R)) Rock also showed no significant difference with zirconia. By contrast, ChemFil((R)) Rock showed significantly higher compressive strength with added titania, and EQUIA (TM) Fil showed significantly higher compressive strength with both zirconia and titania. Fewer air voids were observed in all nanoparticle-containing cements and this, in turn, reduced the development of cracks within the matrix of the cements. These changes in microstructure provide a likely reason for the observed increases in compressive strength, and overall the addition of nanoparticles appears to be a promising strategy for improving the physical properties of GICs.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000353514700014	Publication Date	2015-02-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 1.891; 2015 IF: 1.877
	Call Number	UA @ lucian @ c:irua:132523			Serial	4194
Permanent link to this record



	Author	Jones, L.; Martinez, G.T.; Béché, A.; Van Aert, S.; Nellist, P.D.
	Title	Getting the best from an imperfect detector : an alternative normalisation procedure for quantitative HAADF STEM			Type	A1 Journal article
	Year	2014	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	20	Issue	S3	Pages	126-127
	Keywords	A1 Journal article; Engineering Management (ENM); Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos		Publication Date	2014-08-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276	ISBN		Additional Links	UA library record
	Impact Factor	1.891	Times cited		Open Access
	Notes				Approved	Most recent IF: 1.891; 2014 IF: 1.877
	Call Number	UA @ lucian @ c:irua:136445			Serial	4500
Permanent link to this record



	Author	Denecke, M.A.; Somogyi, A.; Janssens, K.; Simon, R.; Dardenne, K.; Noseck, U.
	Title	Microanalysis (micro-XRF, micro-XANES, and micro-XRD) of a tertiary sediment using microfocused synchrotron radiation			Type	A1 Journal article
	Year	2007	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	13	Issue	3	Pages	165-172
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000246814100004	Publication Date	2007-05-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	31	Open Access
	Notes				Approved	Most recent IF: 1.891; 2007 IF: 1.941
	Call Number	UA @ admin @ c:irua:64739			Serial	5721
Permanent link to this record



	Author	van der Linden, V.; Meesdom, E.; Devos, A.; van Dooren, R.; Nieuwdorp, H.; Janssen, E.; Balace, S.; Vekemans, B.; Vincze, L.; Janssens, K.
	Title	PXRF, \mu-XRF, vacuum \mu-XRF, and EPMA analysis of Email Champlevé objects present in Belgian museums			Type	A1 Journal article
	Year	2011	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	17	Issue	5	Pages	674-685
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	The enamel of 20 Email Champlevé objects dating between the 12th and 19th centuries was investigated by means of microscopic and portable X-ray fluorescence analysis (μ-XRF and PXRF). Seven of these objects were microsampled and the fragments were analyzed with electron probe microanalysis (EPMA) and vacuum μ-XRF to obtain quantitative data about the composition of the glass used to produce these enameled objects. As a result of the evolution of the raw materials employed to produce the base glass, three different compositional groups could be discriminated. The first group consisted of soda-lime-silica glass with a sodium source of mineral origin (with low K content) that was opacified by addition of calcium antimonate crystals. This type of glass was only used in objects made in the 12th century. Email Champlevé objects from the beginning of the 13th century onward were enameled with soda-lime-silica glass with a sodium source of vegetal origin. This type of glass, which has a higher potassium content, was opacified with SnO2 crystals. The glass used for 19th century Email Champlevé artifacts was produced with synthetic and purified components resulting in a different chemical composition compared to the other groups. Although the four analytical techniques employed in this study have their own specific characteristics, they were all found to be suitable for classifying the objects into the different chronological categories.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000295609100005	Publication Date	2011-09-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	9	Open Access
	Notes	; ;			Approved	Most recent IF: 1.891; 2011 IF: 3.007
	Call Number	UA @ admin @ c:irua:92827			Serial	5791
Permanent link to this record



	Author	Nord, M.; Webster, R.W.H.; Paton, K.A.; McVitie, S.; McGrouther, D.; MacLaren, I.; Paterson, G.W.
	Title	Fast pixelated detectors in scanning transmission electron microscopy. Part I: data acquisition, live processing, and storage			Type	A1 Journal article
	Year	2020	Publication	Microscopy And Microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	26	Issue	4	Pages	Pii S1431927620001713-666
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The use of fast pixelated detectors and direct electron detection technology is revolutionizing many aspects of scanning transmission electron microscopy (STEM). The widespread adoption of these new technologies is impeded by the technical challenges associated with them. These include issues related to hardware control, and the acquisition, real-time processing and visualization, and storage of data from such detectors. We discuss these problems and present software solutions for them, with a view to making the benefits of new detectors in the context of STEM more accessible. Throughout, we provide examples of the application of the technologies presented, using data from a Medipix3 direct electron detector. Most of our software are available under an open source licence, permitting transparency of the implemented algorithms, and allowing the community to freely use and further improve upon them.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000555537900004	Publication Date	2020-07-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.8	Times cited	4	Open Access	OpenAccess
	Notes	; The performance of this work was mainly supported by the Engineering and Physical Sciences Research Council (EPSRC) of the UK via the project “Fast Pixel Detectors: a paradigm shift in STEM imaging” (grant no. EP/M009963/1). G.W.P. received additional support from the EPSRC under grant no. EP/M024423/1. M.N. received additional support for this work from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 838001. The studentship of R.W.H.W. was supported by the EPSRC Doctoral Training Partnership grant no. EP/N509668/1. S.McV. was supported by EPSRC grant no. EP/M024423/1. I.M. was supported by EPSRC grant no. EP/M009963/1. The studentship of K.A.P. was funded entirely by the UK Science and Technology Facilities Council (STFC) Industrial CASE studentship “Next2 TEM Detection” (no. ST/P002471/1) with Quantum Detectors Ltd. as the industrial partner. D.McG. was also supported by EPSRC grant no. EP/M009963/1. As an inventor of intellectual property related to the MERLIN detector hardware, he is a beneficiary of the license agreement between the University of Glasgow and Quantum Detectors Ltd. The development of the integration of TopSpin with the Merlin readout of the Medipix3 camera has been performed with the aid of financial assistance from the EPSRC under grant no. EP/R511705/1 and through direct collaboration between NanoMEGAS and Quantum Detectors Ltd. ;			Approved	Most recent IF: 2.8; 2020 IF: 1.891
	Call Number	UA @ admin @ c:irua:171185			Serial	6518
Permanent link to this record



	Author	Paterson, G.W.; Webster, R.W.H.; Ross, A.; Paton, K.A.; Macgregor, T.A.; McGrouther, D.; MacLaren, I.; Nord, M.
	Title	Fast pixelated detectors in scanning transmission electron microscopy. part II : post-acquisition data processing, visualization, and structural characterization			Type	A1 Journal article
	Year	2020	Publication	Microscopy And Microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	26	Issue	5	Pages	944-963
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Fast pixelated detectors incorporating direct electron detection (DED) technology are increasingly being regarded as universal detectors for scanning transmission electron microscopy (STEM), capable of imaging under multiple modes of operation. However, several issues remain around the post-acquisition processing and visualization of the often very large multidimensional STEM datasets produced by them. We discuss these issues and present open source software libraries to enable efficient processing and visualization of such datasets. Throughout, we provide examples of the analysis methodologies presented, utilizing data from a 256 x 256 pixel Medipix3 hybrid DED detector, with a particular focus on the STEM characterization of the structural properties of materials. These include the techniques of virtual detector imaging; higher-order Laue zone analysis; nanobeam electron diffraction; and scanning precession electron diffraction. In the latter, we demonstrate a nanoscale lattice parameter mapping with a fractional precision <= 6 x 10(-4) (0.06%).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000576859800011	Publication Date	2020-09-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.8	Times cited	3	Open Access	OpenAccess
	Notes	; G.W.P. and M.N. were the principal authors of the fpd and pixStem libraries reported herein (details of all contributions are documented in the repositories) and have made all of these available under open source licence GPLv3 for the benefit of the community. R.W.H.W., A.R., and K.A.P. have also made contributions to the source codes in these libraries. G.W.P and M.N. have led the data acquisition and analysis, and the drafting of this manuscript. The performance of this work was mainly supported by Engineering and Physical Sciences Research Council (EPSRC) of the UK via the project “Fast Pixel Detectors: a paradigm shift in STEM imaging” (Grant No. EP/M009963/1). G.W.P. received additional support from the EPSRC under Grant No. EP/M024423/1. M.N. received additional support for this work from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 838001. R.W.H.W., A.R., K.A.P., T.A.M., D.McG., and I.M. have all contributed either through acquisition and analysis of data or through participation in the revision of the manuscript. The studentships of R.W.H.W. and T.A.M. were supported by the EPSRC Doctoral Training Partnership Grant No. EP/N509668/1. I.M. and D.McG. were supported by EPSRC Grant No. EP/M009963/1. The studentship of K.A.P. was funded entirely by the UK Science and Technology Facilities Council (STFC) Industrial CASE studentship “Next2 TEM Detection” (No. ST/ P002471/1) with Quantum Detectors Ltd. as the industrial partner. As an inventor of intellectual property related to the MERLIN detector hardware, D.McG. is a beneficiary of the license agreement between the University of Glasgow and Quantum Detectors Ltd. We thank Diamond Quantum Detectors Ltd. for Medipix3 detector support; Dr. Bruno Humbel from Okinawa Institute of Science and Technology; and Dr. Caroline Kizilyaprak from the University of Lausanne for providing the liver sample; Dr. Ingrid Hallsteinsen and Prof. Thomas Tybell from the Norwegian University of Science and Technology (NTNU) for providing the La0.7Sr0.3MnO3/LaFeO3/SrTiO3 sample shown in Figure 4; and NanoMEGAS for the loan of the DigiSTAR precession system and TopSpin acquisition software. The development of the integration of TopSpin with the Merlin readout of the Medipix3 camera has been performed with the aid of financial assistance from the EPSRC under Grant No. EP/R511705/1 and through direct collaboration between NanoMEGAS and Quantum Detectors Ltd. ;			Approved	Most recent IF: 2.8; 2020 IF: 1.891
	Call Number	UA @ admin @ c:irua:172695			Serial	6519
Permanent link to this record



	Author	Neelisetty, K.K.; Kumar C.N., S.; Kashiwar, A.; Scherer, T.; Chakravadhanula, V.S.K.; Kuebel, C.
	Title	Novel thin film lift-off process for in situ TEM tensile characterization			Type	A1 Journal article
	Year	2021	Publication	Microscopy And Microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	27	Issue	S1	Pages	216-217
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	2021-07-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276	ISBN		Additional Links	UA library record
	Impact Factor	1.891	Times cited		Open Access	Not_Open_Access
	Notes				Approved	Most recent IF: 1.891
	Call Number	UA @ admin @ c:irua:183617			Serial	6873
Permanent link to this record



	Author	Friedrich, T.; Yu, C.-P.; Verbeeck, J.; Van Aert, S.
	Title	Phase object reconstruction for 4D-STEM using deep learning			Type	A1 Journal article
	Year	2023	Publication	Microscopy and microanalysis	Abbreviated Journal
	Volume	29	Issue	1	Pages	395-407
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	In this study, we explore the possibility to use deep learning for the reconstruction of phase images from 4D scanning transmission electron microscopy (4D-STEM) data. The process can be divided into two main steps. First, the complex electron wave function is recovered for a convergent beam electron diffraction pattern (CBED) using a convolutional neural network (CNN). Subsequently, a corresponding patch of the phase object is recovered using the phase object approximation. Repeating this for each scan position in a 4D-STEM dataset and combining the patches by complex summation yields the full-phase object. Each patch is recovered from a kernel of 3x3 adjacent CBEDs only, which eliminates common, large memory requirements and enables live processing during an experiment. The machine learning pipeline, data generation, and the reconstruction algorithm are presented. We demonstrate that the CNN can retrieve phase information beyond the aperture angle, enabling super-resolution imaging. The image contrast formation is evaluated showing a dependence on the thickness and atomic column type. Columns containing light and heavy elements can be imaged simultaneously and are distinguishable. The combination of super-resolution, good noise robustness, and intuitive image contrast characteristics makes the approach unique among live imaging methods in 4D-STEM.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001033590800038	Publication Date	2023-01-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.8	Times cited	1	Open Access	OpenAccess
	Notes	We acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 770887 PICOMETRICS) and funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 823717 ESTEEM3. J.V. and S.V.A acknowledge funding from the University of Antwerp through a TOP BOF project. The direct electron detector (Merlin, Medipix3, Quantum Detectors) was funded by the Hercules fund from the Flemish Government. This work was supported by the FWO and FNRS within the 2Dto3D project of the EOS program (grant number 30489208).			Approved	Most recent IF: 2.8; 2023 IF: 1.891
	Call Number	UA @ admin @ c:irua:198221			Serial	8912
Permanent link to this record



	Author	Van Aert, S.; Verbeeck, J.; Bals, S.; Erni, R.; van Dyck, D.; Van Tendeloo, G.
	Title	Atomic resolution mapping using quantitative high-angle annular dark field scanning transmission electron microscopy			Type	A1 Journal article
	Year	2009	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	15	Issue	S:2	Pages	464-465
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000208119100230	Publication Date	2009-07-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	1	Open Access
	Notes				Approved	Most recent IF: 1.891; 2009 IF: 3.035
	Call Number	UA @ lucian @ c:irua:96555UA @ admin @ c:irua:96555			Serial	178
Permanent link to this record



	Author	Verbeeck, J.; Van Aert, S.; Zhang, L.; Haiyan, T.; Schattschneider, P.; Rosenauer, A.
	Title	Computational aspects in quantitative EELS			Type	A1 Journal article
	Year	2010	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	16	Issue	S:2	Pages	240-241
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos		Publication Date	2010-08-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record
	Impact Factor	1.891	Times cited		Open Access
	Notes				Approved	Most recent IF: 1.891; 2010 IF: 3.259
	Call Number	UA @ lucian @ c:irua:96556UA @ admin @ c:irua:96556			Serial	454
Permanent link to this record



	Author	Bals, S.; Van Aert, S.; Van Tendeloo, G.; van Dyck, D.; Avila-Brande, D.
	Title	Statistical estimation of oxygen atomic positions eith sub Ångstrom precision from exit wave reconstruction			Type	A3 Journal article
	Year	2005	Publication	Microscopy and microanalysis	Abbreviated Journal
	Volume	11	Issue	S	Pages	556-557
	Keywords	A3 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:54881			Serial	3155
Permanent link to this record



	Author	Bals, S.; Van Aert, S.; Verbeeck, J.; Van Tendeloo, G.
	Title	Structural, chemical and electronic characterization of ceramic materials using quantitative (scanning) transmission electron microscopy			Type	A1 Journal article
	Year	2007	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	13	Issue	S:3	Pages	332-333
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos		Publication Date	2008-02-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record
	Impact Factor	1.891	Times cited		Open Access
	Notes				Approved	Most recent IF: 1.891; 2007 IF: 1.941
	Call Number	UA @ lucian @ c:irua:96553			Serial	3224
Permanent link to this record



	Author	Goris, B.; Freitag, B.; Zanaga, D.; Bladt, E.; Altantzis, T.; Ringnalda, J.; Bals, S.
	Title	Towards quantitative EDX results in 3 dimensions			Type	A1 Journal article
	Year	2014	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	20	Issue	S:3	Pages	766-767
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos		Publication Date	2014-08-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record
	Impact Factor	1.891	Times cited		Open Access	OpenAccess
	Notes	335078 Colouratom; Fwo; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot);			Approved	Most recent IF: 1.891; 2014 IF: 1.877
	Call Number	UA @ lucian @ c:irua:125381			Serial	3687
Permanent link to this record



	Author	Batenburg, K.J.; Bals, S.; Van Aert, S.; Roelandts, T.; Sijbers, J.
	Title	Ultra-high resolution electron tomography for materials science : a roadmap			Type	A1 Journal article
	Year	2011	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	17	Issue	S:2	Pages	934-935
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos		Publication Date	2011-10-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record
	Impact Factor	1.891	Times cited		Open Access
	Notes				Approved	Most recent IF: 1.891; 2011 IF: 3.007
	Call Number	UA @ lucian @ c:irua:96554			Serial	3792
Permanent link to this record



	Author	Masenelli-Varlot, K.; Malchere, A.; Ferreira, J.; Heidari Mezerji, H.; Bals, S.; Messaoudi, C.; Garrido, S.M.
	Title	Wet-STEM tomography : principles, potentialities and limitations			Type	A1 Journal article
	Year	2014	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	20	Issue	2	Pages	366-375
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The characterization of biological and inorganic materials by determining their three-dimensional structure in conditions closer to their native state is a major challenge of technological research. Environmental scanning electron microscopy (ESEM) provides access to the observation of hydrated samples in water environments. Here, we present a specific device for ESEM in the scanning transmission electron microscopy mode, allowing the acquisition of tilt-series suitable for tomographic reconstructions. The resolution which can be obtained with this device is first determined. Then, we demonstrate the feasibility of tomography on wet materials. The example studied here is hydrophilic mesoporous silica (MCM-41). Finally, the minimum thickness of water which can be detected is calculated from Monte Carlo simulations and compared with the resolution expected in the tomograms.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000337304700005	Publication Date	2014-02-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	9	Open Access	OpenAccess
	Notes	IAP-PAI; European Research Council under the 7th Framework Program (FP7); ERC grant no. 335078-COLOURATOMS.; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot);			Approved	Most recent IF: 1.891; 2014 IF: 1.877
	Call Number	UA @ lucian @ c:irua:118411			Serial	3915
Permanent link to this record