NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	481–510 of 1276 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 >>

List View

Citations

Details

	Records
	Author	Mortet, V.; Zhang, L.; Eckert, M.; D'Haen, J.; Soltani, A.; Moreau, M.; Troadec, D.; Neyts, E.; De Jaeger, J.C.; Verbeeck, J.; Bogaerts, A.; Van Tendeloo, G.; Haenen, K.; Wagner, P.
	Title	Grain size tuning of nanocrystalline chemical vapor deposited diamond by continuous electrical bias growth : experimental and theoretical study			Type	A1 Journal article
	Year	2012	Publication	Physica status solidi : A : applications and materials science	Abbreviated Journal	Phys Status Solidi A
	Volume	209	Issue	9	Pages	1675-1682
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this work, a detailed structural and spectroscopic study of nanocrystalline diamond (NCD) thin films grown by a continuous bias assisted CVD growth technique is reported. This technique allows the tuning of grain size and phase purity in the deposited material. The crystalline properties of the films are characterized by SEM, TEM, EELS, and Raman spectroscopy. A clear improvement of the crystalline structure of the nanograined diamond film is observed for low negative bias voltages, while high bias voltages lead to thin films consisting of diamond grains of only ∼10 nm nanometer in size, showing remarkable similarities with so-called ultrananocrystalline diamond. These layers arecharacterized by an increasing amount of sp2-bonded carbon content of the matrix in which the diamond grains are embedded. Classical molecular dynamics simulations support the observed experimental data, giving insight in the underlying mechanism for the observed increase in deposition rate with bias voltage. Furthermore, a high atomic concentration of hydrogen has been determined in these films. Finally, Raman scattering analyses confirm that the Raman line observed at ∼1150 cm−1 cannot be attributed to trans-poly-acetylene, which continues to be reported in literature, reassigning it to a deformation mode of CHx bonds in NCD.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000308942100009	Publication Date	2012-09-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1862-6300;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.775	Times cited	31	Open Access
	Notes	M.E. and E.N. acknowledge financial support from, respectively, the Institute for Promotion of Innovation through Science and Technology in Flanders (IWT), and the Research Foundation-Flanders (FWO). J.V. gratefully acknowledges financial support from the GOA project “XANES meets ELNES” of the research fund of the University of Antwerp. Calculation support was provided by the University of Antwerp through the core facility CALCUA. G.V.T. acknowledges the ERC grant COUNTATOMS. The work was also financially supported by the joint UAUHasseltMethusalem “NANO” network, the Research Programs G.0068.07 and G.0555.10N of the Research Foundation-Flanders (FWO), the IAP-P6/42 project “Quantum Effects in Clusters and Nanowires”, and by the EU FP7 through the Integrated Infrastructure Initiative “ESMI” (No. 262348), the Marie Curie ITN “MATCON” (PITN-GA-2009-238201), and the Collaborative Project “DINAMO” (No. 245122).			Approved	Most recent IF: 1.775; 2012 IF: 1.469
	Call Number	UA @ lucian @ c:irua:101516UA @ admin @ c:irua:101516			Serial	1364
Permanent link to this record



	Author	Mehta, A.N.; Mo, J.; Pourtois, G.; Dabral, A.; Groven, B.; Bender, H.; Favia, P.; Caymax, M.; Vandervorst, W.
	Title	Grain-boundary-induced strain and distortion in epitaxial bilayer MoS₂ lattice			Type	A1 Journal article
	Year	2020	Publication	Journal Of Physical Chemistry C	Abbreviated Journal	J Phys Chem C
	Volume	124	Issue	11	Pages	6472-6478
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Grain boundaries between 60 degrees rotated and twinned crystals constitute the dominant type of extended line defects in two-dimensional transition metal dichalcogenides (2D MX2) when grown on a single crystalline template through van der Waals epitaxy. The two most common 60 degrees grain boundaries in MX2 layers, i.e., beta- and gamma-boundaries, introduce distinct distortion and strain into the 2D lattice. They impart a localized tensile or compressive strain on the subsequent layer, respectively, due to van der Waals coupling in bilayer MX2 as determined by combining atomic resolution electron microscopy, geometric phase analysis, and density functional theory. Based on these observations, an alternate route to strain engineering through controlling intrinsic van der Waals forces in homobilayer MX2 is proposed. In contrast to the commonly used external means, this approach enables the localized application of strain to tune the electronic properties of the 2D semiconducting channel in ultra-scaled nanoelectronic applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000526396000067	Publication Date	2020-02-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447; 1932-7455	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.7	Times cited	2	Open Access
	Notes	; ;			Approved	Most recent IF: 3.7; 2020 IF: 4.536
	Call Number	UA @ admin @ c:irua:168625			Serial	6528
Permanent link to this record



	Author	Lu, X.P.; Bruggeman, P.J.; Reuter, S.; Naidis, G.; Bogaerts, A.; Laroussi, M.; Keidar, M.; Robert, E.; Pouvesle, J.-M.; Liu, D.W.; Ostrikov, K.(K.)
	Title	Grand challenges in low temperature plasmas			Type	A1 Journal article
	Year	2022	Publication	Frontiers in physics	Abbreviated Journal
	Volume	10	Issue		Pages	1040658-12
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Low temperature plasmas (LTPs) enable to create a highly reactive environment at near ambient temperatures due to the energetic electrons with typical kinetic energies in the range of 1 to 10 eV (1 eV = 11600K), which are being used in applications ranging from plasma etching of electronic chips and additive manufacturing to plasma-assisted combustion. LTPs are at the core of many advanced technologies. Without LTPs, many of the conveniences of modern society would simply not exist. New applications of LTPs are continuously being proposed. Researchers are facing many grand challenges before these new applications can be translated to practice. In this paper, we will discuss the challenges being faced in the field of LTPs, in particular for atmospheric pressure plasmas, with a focus on health, energy and sustainability.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000878212000001	Publication Date	2022-10-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2296-424x	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	3.1	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 3.1
	Call Number	UA @ admin @ c:irua:192173			Serial	7267
Permanent link to this record



	Author	Ghorbanfekr Kalashami, H.
	Title	Graphene-based membranes and nanoconfined water : molecular dynamics simulation study			Type	Doctoral thesis
	Year	2019	Publication		Abbreviated Journal
	Volume		Issue		Pages	243 p.
	Keywords	Doctoral thesis; Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:160548			Serial	5216
Permanent link to this record



	Author	Chen, Z.; Kong, M.; Milošević, M.V.; Wu, Y.
	Title	Ground state configurations of two-dimensional plasma crystals under long-range attractive particle interaction force			Type	A1 Journal article
	Year	2003	Publication	Physica scripta	Abbreviated Journal	Phys Scripta
	Volume	67	Issue	5	Pages	439
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Stockholm	Editor
	Language		Wos	000183154800014	Publication Date	2003-07-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0031-8949;1402-4896;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.28	Times cited	4	Open Access
	Notes				Approved	Most recent IF: 1.28; 2003 IF: 0.688
	Call Number	UA @ lucian @ c:irua:57249			Serial	1385
Permanent link to this record



	Author	Vets, C.
	Title	Growth properties of carbon nanomaterials : towards tuning for electronic applications			Type	Doctoral thesis
	Year	2020	Publication		Abbreviated Journal
	Volume		Issue		Pages	130 p.
	Keywords	Doctoral thesis; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:164737			Serial	6299
Permanent link to this record



	Author	Zhang, Q.-Z.; Wang, W.Z.; Thille, C.; Bogaerts, A.
	Title	H2S Decomposition into H2 and S2 by Plasma Technology: Comparison of Gliding Arc and Microwave Plasma			Type	A1 Journal article
	Year	2020	Publication	Plasma Chemistry And Plasma Processing	Abbreviated Journal	Plasma Chem Plasma P
	Volume	40	Issue	5	Pages	1163-1187
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	We studied hydrogen sulfide (H2S) decomposition into hydrogen (H2) and sulfur (S2) in a gliding arc plasmatron (GAP) and microwave (MW) plasma by a combination of 0D and 2D models. The conversion, energy efficiency, and plasma distribution are examined for different discharge conditions, and validated with available experiments from literature. Furthermore, a comparison is made between GAP and MW plasma. The GAP operates at atmospheric pressure, while the MW plasma experiments to which comparison is made were performed at reduced pressure. Indeed, the MW discharge region becomes very much contracted near atmospheric pressure, at the conditions under study, as revealed by our 2D model. The models predict that thermal reactions play the most important role in H2S decomposition in both plasma types. The GAP has a higher energy efficiency but lower conversion than the MW plasma at their typical conditions. When compared at the same conversion, the GAP exhibits a higher energy efficiency and lower energy cost than the MW plasma.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000543012200001	Publication Date	2020-06-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0272-4324	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.6	Times cited		Open Access
	Notes	This work was supported by the Scientific Research Foundation from Dalian University of Technology, DUT19RC(3)045. We gratefully acknowledge T. Godfroid (Materia Nova) for sharing the experimental data about the MW plasma. The calculations were performed using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen (UAntwerpen), a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI) and the UAntwerpen.			Approved	Most recent IF: 3.6; 2020 IF: 2.355
	Call Number	PLASMANT @ plasmant @c:irua:172490			Serial	6409
Permanent link to this record



	Author	Van der Paal, J.; Verheyen, C.; Neyts, E.C.; Bogaerts, A.
	Title	Hampering Effect of Cholesterol on the Permeation of Reactive Oxygen Species through Phospholipids Bilayer: Possible Explanation for Plasma Cancer Selectivity			Type	A1 Journal article
	Year	2017	Publication	Scientific reports	Abbreviated Journal	Sci Rep-Uk
	Volume	7	Issue	7	Pages	39526
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In recent years, the ability of cold atmospheric pressure plasmas (CAPS) to selectively induce cell death in cancer cells has been widely established. This selectivity has been assigned to the reactive oxygen and nitrogen species (RONS) created in CAPs. To provide new insights in the search for an explanation for the observed selectivity, we calculate the transfer free energy of multiple ROS across membranes containing a varying amount of cholesterol. The cholesterol fraction is investigated as a selectivity parameter because membranes of cancer cells are known to contain lower fractions of cholesterol compared to healthy cells. We find that cholesterol has a significant effect on the permeation of reactive species across a membrane. Indeed, depending on the specific reactive species, an increasing cholesterol fraction can lead to (i) an increase of the transfer free energy barrier height and width, (ii) the formation of a local free energy minimum in the center of the membrane and (iii) the creation of extra free energy barriers due to the bulky sterol rings. In the context of plasma oncology, these observations suggest that the increased ingress of RONS in cancer cells can be explained by the decreased cholesterol fraction of their cell membrane.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000391306900001	Publication Date	2017-01-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2045-2322	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.259	Times cited	27	Open Access	OpenAccess
	Notes	The authors acknowledge financial support from the Fund for Scientific Research (FWO) Flanders, grant number 11U5416N. The calculations were performed in part using the Turing HPC infrastructure of the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI) and the Universiteit Antwerpen.			Approved	Most recent IF: 4.259
	Call Number	PLASMANT @ plasmant @ c:irua:139512			Serial	4340
Permanent link to this record



	Author	Tavernier, S.M.F.; Nies, E.; Gijbels, R.
	Title	Hard-spere model for hydrodynamic chromatography systems			Type	A1 Journal article
	Year	1981	Publication	Analytical proceedings	Abbreviated Journal
	Volume	18	Issue		Pages	31-34
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos		Publication Date	2004-03-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0144-557X;	ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:110347			Serial	1409
Permanent link to this record



	Author	Navarrete, A.; Centi, G.; Bogaerts, A.; Mart?n,?ngel; York, A.; Stefanidis, G.D.
	Title	Harvesting Renewable Energy for Carbon Dioxide Catalysis			Type	A1 Journal article
	Year	2017	Publication	Energy technology	Abbreviated Journal	Energy Technol-Ger
	Volume	5	Issue	5	Pages	796-811
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The use of renewable energy (RE) to transform carbon dioxide into commodities (i.e., CO2 valorization) will pave the way towards a more sustainable economy in the coming years. But how can we efficiently use this energy (mostly available as electricity or solar light) to drive the necessary (catalytic) transformations? This paper presents a review of the technological advances in the transformation of carbon dioxide by means of RE. The socioeconomic implications and chemical basis of the transformation of carbon dioxide with RE are discussed. Then a general view of the use of RE to activate the (catalytic) transformations of carbon dioxide with microwaves, plasmas, and light is presented. The fundamental phenomena involved are introduced from a catalytic and reaction device perspective to present the advantages of this energy form as well as the inherent limitations of the present state-of-the-art. It is shown that efficient use of RE requires the redesign of current catalytic concepts. In this context, a new kind of reaction system, an energy-harvesting device, is proposed as a new conceptual approach for this endeavor. Finally, the challenges that lie ahead for the efficient and economical use of RE for carbon dioxide conversion are exposed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000451619500001	Publication Date	2017-02-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2194-4288	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.789	Times cited	15	Open Access	Not_Open_Access
	Notes	Fund for Scientific Research Flanders, G.0254.14 N, G.0217.14 N and G.0383.16 N ; Spanish Ministry of Economy and Competitiveness, ENE2014-53459-R ;			Approved	Most recent IF: 2.789
	Call Number	PLASMANT @ plasmant @ c:irua:144217			Serial	4615
Permanent link to this record



	Author	Zhang, Q.-Z.; Liu, Y.-X.; Jiang, W.; Bogaerts, A.; Wang, Y.-N.
	Title	Heating mechanism in direct current superposed single-frequency and dual-frequency capacitively coupled plasmas			Type	A1 Journal article
	Year	2013	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	22	Issue	2	Pages	025014-25018
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this work particle-in-cell/Monte Carlo collision simulations are performed to study the heating mechanism and plasma characteristics in direct current (dc) superposed radio-frequency (RF) capacitively coupled plasmas, operated both in single-frequency (SF) and dual-frequency (DF) regimes. An RF (60/2 MHz) source is applied on the bottom electrode to sustain the discharge, and a dc source is fixed on the top electrode. The heating mechanism appears to be very different in dc superposed SF and DF discharges. When only a single source of 60 MHz is applied, the plasma bulk region is reduced by the dc source, thus the ionization rate and hence the electron density decrease with rising dc voltage. However, when a DF source of 60 and 2 MHz is applied, the electron density can increase upon addition of a dc voltage, depending on the gap length and applied dc voltage. This is explained from the spatiotemporal ionization rates in the DF discharge. In fact, a completely different behavior is observed for the ionization rate in the two half-periods of the LF source. In the first LF half-period, the situation resembles the dc superposed SF discharge, and the reduced plasma bulk region due to the negative dc bias results in a very small effective discharge area and a low ionization rate. On the other hand, in the second half-period, the negative dc bias is to some extent counteracted by the LF voltage, and the sheath close to the dc electrode becomes particularly thin. Consequently, the amplitude of the high-frequency sheath oscillations at the top electrode is largely enhanced, while the LF sheath at the bottom electrode is in its expanding phase and can thus well confine the high-energy electrons. Therefore, the ionization rate increases considerably in this second LF half-period. Furthermore, in addition to the comparison between SF and DF discharges and the effect of gap length and dc voltage, the effect of secondary electrons is examined.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000317275400016	Publication Date	2013-03-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	9	Open Access
	Notes				Approved	Most recent IF: 3.302; 2013 IF: 3.056
	Call Number	UA @ lucian @ c:irua:106877			Serial	1413
Permanent link to this record



	Author	Zhang, Q.-Z.; Wang, Y.-N.; Bogaerts, A.
	Title	Heating mode transition in a hybrid direct current/dual-frequency capacitively coupled CF₄ discharge			Type	A1 Journal article
	Year	2014	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	115	Issue	22	Pages	223302-223306
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Computer simulations based on the particle-in-cell/Monte Carlo collision method are performed to study the plasma characteristics and especially the transition in electron heating mechanisms in a hybrid direct current (dc)/dual-frequency (DF) capacitively coupled CF 4 discharge. When applying a superposed dc voltage, the plasma density first increases, then decreases, and finally increases again, which is in good agreement with experiments. This trend can be explained by the transition between the four main heating modes, i.e., DF coupling, dc and DF coupling, dc source dominant heating, and secondary electron dominant heating.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000337891800006	Publication Date	2014-06-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;1089-7550;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	9	Open Access
	Notes				Approved	Most recent IF: 2.068; 2014 IF: 2.183
	Call Number	UA @ lucian @ c:irua:117347			Serial	1414
Permanent link to this record



	Author	Vohra, A.; Khanam, A.; Slotte, J.; Makkonen, I.; Pourtois, G.; Porret, C.; Loo, R.; Vandervorst, W.
	Title	Heavily phosphorus doped germanium : strong interaction of phosphorus with vacancies and impact of tin alloying on doping activation			Type	A1 Journal article
	Year	2019	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	125	Issue	22	Pages	225703
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	We examined the vacancy trapping proficiency of Sn and P atoms in germanium using positron annihilation spectroscopy measurements, sensitive to the open-volume defects. Epitaxial Ge1 xSnx films were grown by chemical vapor deposition with different P concentrations in the 3: 0 1019-1: 5 1020 cm 3 range. We corroborate our findings with first principles simulations. Codoping of Ge with a Sn concentration of up to 9% is not an efficient method to suppress the free vacancy concentration and the formation of larger phosphorus-vacancy complexes. Experimental results confirm an increase in the number of P atoms around the monovacancy with P-doping, leading to dopant deactivation in epitaxial germanium-tin layers with similar Sn content. Vice versa, no impact on the improvement of maximum achieved P activation in Ge with increasing Sn-doping has been observed. Theoretical calculations also confirm that Pn-V (vacancy) complexes are energetically more stable than the corresponding SnmPn-V and Snm-V defect structures with the same number of alien atoms (Sn or P) around the monovacancy. he strong attraction of vacancies to the phosphorus atoms remains the dominant dopant deactivation mechanism in Ge as well as in Ge1 xSnx. Published under license by AIP Publishing.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000471698600044	Publication Date	2019-06-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979; 1089-7550	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	1	Open Access
	Notes				Approved	Most recent IF: 2.068
	Call Number	UA @ admin @ c:irua:161333			Serial	6300
Permanent link to this record



	Author	Clima, S.; Govoreanu, B.; Jurczak, M.; Pourtois, G.
	Title	HfO_x as RRAM material : first principles insights on the working principles			Type	A1 Journal article
	Year	2014	Publication	Microelectronic engineering	Abbreviated Journal	Microelectron Eng
	Volume	120	Issue		Pages	13-18
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	First-principles simulations were employed to gain atomistic insights on the working principles of amorphous HfO2 based Resistive Random Access Memory stack: the nature of the defect responsible for the switching between the High and Low Resistive States has been unambiguously identified to be the substoichiometric Hf sites (commonly called oxygen vacancy-V-O) and the kinetics of the process have been investigated through the study of O diffusion. Also the role of each material layer in the TiN/HfO2/Hf/TiN RRAM stack and the impact of the deposition techniques have been examined: metallic Hf sputtering is needed to provide an oxygen exchange layer that plays the role of defect buffer. TiN shall be a good defect barrier for O but a bad defect buffer layer. A possible scenario to explain the device degradation (switching failure) mechanism has been proposed – the relaxation of the metastable amorphous phase towards crystalline structure leads to denser, more structured cluster that can increase the defect migration barriers. (C) 2013 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000336697300004	Publication Date	2013-08-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0167-9317;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.806	Times cited	22	Open Access
	Notes				Approved	Most recent IF: 1.806; 2014 IF: 1.197
	Call Number	UA @ lucian @ c:irua:117767			Serial	3535
Permanent link to this record



	Author	Huygh, S.; Bogaerts, A.; Bal, K.M.; Neyts, E.C.
	Title	High Coke Resistance of a TiO₂Anatase (001) Catalyst Surface during Dry Reforming of Methane			Type	A1 Journal Article
	Year	2018	Publication	Journal Of Physical Chemistry C	Abbreviated Journal	J Phys Chem C
	Volume	122	Issue	17	Pages	9389-9396
	Keywords	A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	The resistance of a TiO2 anatase (001) surface to coke formation was studied in the context of dry reforming of methane using density functional theory (DFT) calculations. As carbon atoms act as precursors for coke formation, the resistance to coke formation can be measured by the carbon coverage of the surface. This is related to the stability of different CHx (x = 0−3) species and their rate of hydrogenation and dehydrogenation on the TiO2 surface. Therefore, we studied the reaction mechanisms and their corresponding rates as a function of the temperature for the dehydrogenation of the species on the surface. We found that the stabilities of C and CH are significantly lower than those of CH3 and CH2. The hydrogenation rates of the different species are significantly higher than the dehydrogenation rates in a temperature range of 300−1000 K. Furthermore, we found that dehydrogenation of CH3, CH2, and CH will only occur at appreciable rates starting from 600, 900, and 900 K, respectively. On the basis of these results, it is clear that the anatase (001) surface has a high coke resistance, and it is thus not likely that the surface will become poisoned by coke during dry reforming of methane. As the rate limiting step in dry reforming is the dissociative adsorption of CH4, we studied an alternative approach to thermal catalysis. We found that the temperature threshold for dry reforming is at least 700 K. This threshold temperature may be lowered by the use of plasma-catalysis, where the appreciable rates of adsorption of plasma-generated CHx radicals result in bypassing the rate limiting step of the reaction.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000431723700014	Publication Date	2018-05-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	1	Open Access	OpenAccess
	Notes	Federaal Wetenschapsbeleid, IAP/7 ; Fonds Wetenschappelijk Onderzoek, G.0217.14N ; Onderzoeksfonds, Universiteit Antwerpen, 32249 ;			Approved	Most recent IF: 4.536
	Call Number	PLASMANT @ plasmant @c:irua:151529c:irua:152816			Serial	5000
Permanent link to this record



	Author	Oleshko, V.; Volkov, V.; Gijbels, R.; Jacob, W.; Vargaftik, M.; Moiseev, I.; Van Tendeloo, G.
	Title	High-resolution electron microscopy and electron energy-loss spectroscopy of giant palladium clusters			Type	A1 Journal article
	Year	1995	Publication	Zeitschrift für Physik : D : atoms, molecules and clusters	Abbreviated Journal
	Volume	34	Issue		Pages	283-291
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT); Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Berlin	Editor
	Language		Wos	A1995RY37000010	Publication Date	2005-04-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0178-7683;1434-6079;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	22	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:12276			Serial	1444
Permanent link to this record



	Author	Armelao, L.; Bertagnolli, H.; Bleiner, D.; Groenewolt, M.; Gross, S.; Krishnan, V.; Sada, C.; Schubert, U.; Tondello, E.; Zattin, A.
	Title	Highly dispersed mixed zirconia and hafnia nanoparticles in a silica matrix: First example of a ZrO2-HfO2-SiO2 ternary oxide system			Type	A1 Journal article
	Year	2007	Publication	Advanced functional materials	Abbreviated Journal	Adv Funct Mater
	Volume		Issue		Pages
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	ZrO2 and HfO2 nanoparticles are homogeneously dispersed in SiO2 matrices (supported film and bulk powders) by copolymerization of two oxozirconium and oxohafnium clusters (M4O(2)(OMc)(12), M= Zr, Hf; OMc = OC(O)-C(CH3)=CH2) with (methacryloxypropyl)trimethoxysilane (MAPTMS, (CH2=C(CH3)C(O)O)-(CH2)(3)Si(OCH3)(3)). After calcination (at a temperature >= 800 degrees C), a silica matrix with homogeneously distributed MO2 nanocrystallites is obtained. This route yields a spatially homogeneous dispersion of the metal precursors inside the silica matrix, which is maintained during calcination. The composition of the films and the powders is studied before and after calcination by using Fourier transform infrared (FTIR) analysis, X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS), and laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS). The local environment of the metal atoms in one of the calcined samples is investigated by using X-ray Absorption Fine Structure (XAFS) spectroscopy. Through X-ray diffraction (XRD) the crystallization of Hf and Zr oxides is seen at temperatures higher than those expected for the pure oxides, and transmission electron microscopy (TEM) shows the presence of well-distributed and isolated crystalline oxide nanoparticles (540 nm).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000248062100011	Publication Date	2007-05-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1616-301x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.124	Times cited	34	Open Access
	Notes				Approved	Most recent IF: 12.124; 2007 IF: 7.496
	Call Number	UA @ lucian @ c:irua:95083			Serial	4521
Permanent link to this record



	Author	Bogaerts, A.; Okhrimovskyy, A.; Baguer, N.; Gijbels, R.
	Title	Hollow cathode discharges with gas flow: numerical modelling for the effect on the sputtered atoms and the deposition flux			Type	A1 Journal article
	Year	2005	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	14	Issue		Pages	191-200
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000227652500021	Publication Date	2005-02-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	9	Open Access
	Notes				Approved	Most recent IF: 3.302; 2005 IF: 1.798
	Call Number	UA @ lucian @ c:irua:50478			Serial	1480
Permanent link to this record



	Author	Van Laer, K.; Bogaerts, A.
	Title	How bead size and dielectric constant affect the plasma behaviour in a packed bed plasma reactor: a modelling study			Type	A1 Journal article
	Year	2017	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	26	Issue	26	Pages	085007
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Packed bed plasma reactors (PBPRs) are gaining increasing interest for use in environmental applications, such as greenhouse gas conversion into value-added chemicals or renewable fuels and volatile pollutant removal (e.g. NOx, VOC, K), as they enhance the conversion and energy efficiency of the process compared to a non-packed reactor. However, the plasma behaviour in a PBPR is not well understood. In this paper we demonstrate, by means of a fluid model, that the discharge behaviour changes considerably when changing the size of the packing beads and their dielectric constant, while keeping the interelectrode spacing constant. At low dielectric constant, the plasma is spread out over the full discharge gap, showing significant density in the voids as well as in the connecting void channels. The electric current profile shows a strong peak during each half cycle. When the dielectric constant increases, the plasma becomes localised in the voids, with a current profile consisting of many smaller peaks during each half cycle. For large bead sizes, the shift from full gap discharge to localised discharges takes place at a higher dielectric constant than for smaller beads. Furthermore, smaller beads or beads with a lower dielectric constant require a higher breakdown voltage to cause plasma formation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000406503600003	Publication Date	2017-07-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1361-6595	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	22	Open Access	OpenAccess
	Notes	K Van Laer is indebted to the Institute for the Promotion of Innovation by Science and Technology in Flanders (IWT Flanders) for financial support. This research was carried out in the framework of the network on Physical Chemistry of Plasma-Surface Interactions – Interuniversity Attraction Poles, phase VII (http://psi-iap7.ulb.ac.be/), and supported by the Belgian Science Policy Office (BELSPO). The calculations were carried out using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen (UAntwerpen), a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI) and the UAntwerpen.			Approved	Most recent IF: 3.302
	Call Number	PLASMANT @ plasmant @ c:irua:144796			Serial	4635
Permanent link to this record



	Author	Oliveira, M.C.; Yusupov, M.; Bogaerts, A.; Cordeiro, R.M.
	Title	How do nitrated lipids affect the properties of phospholipid membranes?			Type	A1 Journal article
	Year	2020	Publication	Archives Of Biochemistry And Biophysics	Abbreviated Journal	Arch Biochem Biophys
	Volume	695	Issue		Pages	108548
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Biological membranes are under constant attack of free radicals, which may lead to lipid nitro-oxidation, pro ducing a complex mixture of nitro-oxidized lipids that are responsible for structural and dynamic changes on the membrane. Despite the latter, nitro-oxidized lipids are also associated with several inflammatory and neuro degenerative diseases, the underlying mechanisms of which remain elusive. We perform atomistic molecular dynamics simulations using several isomers of nitro-oxidized lipids to study their effect on the structure and permeability of the membrane, as well as the interaction between the mixture of these products in the phospholipid membrane environment. Our results show that the stereo- and positional isomers have a stronger effect on the properties of the membrane composed of oxidized lipids compared to that containing nitrated lipids. Nevertheless, nitrated lipids lead to three-fold increase in water permeability compared to oxidized lipids. In addition, we show that in a membrane consisting of combined nitro-oxidized lipid products, the presence of oxidized lipids protects the membrane from transient pores. Is well stablished that plasma application and photodynamic therapy produces a number of oxidative species used to kill cancer cells, through membrane damage induced by nitro-oxidative stress. This study is important to elucidate the mechanisms and the molecular level properties involving the reactive species produced during that cancer therapies.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000594173400010	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-9861	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.9	Times cited		Open Access
	Notes	CAPES; Flanders Research Foundation, 1200219N ; We thank Universidade Federal do ABC for providing the computational resources needed for completion of this work and CAPES for scholarship granted. M.Y. acknowledges the Flanders Research Foundation (grant 1200219N) for financial support.			Approved	Most recent IF: 3.9; 2020 IF: 3.165
	Call Number	PLASMANT @ plasmant @c:irua:173861			Serial	6440
Permanent link to this record



	Author	Khosravian, N.; Bogaerts, A.; Huygh, S.; Yusupov, M.; Neyts, E.C.
	Title	How do plasma-generated OH radicals react with biofilm components? Insights from atomic scale simulations			Type	A1 Journal article
	Year	2015	Publication	Biointerphases	Abbreviated Journal	Biointerphases
	Volume	10	Issue	10	Pages	029501
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The application of nonthermal atmospheric pressure plasma is emerging as an alternative and efficient technique for the inactivation of bacterial biofilms. In this study, reactive molecular dynamics simulations were used to examine the reaction mechanisms of hydroxyl radicals, as key reactive oxygen plasma species in biological systems, with several organic molecules (i.e., alkane, alcohol, carboxylic acid, and amine), as prototypical components of biomolecules in the biofilm. Our results demonstrate that organic molecules containing hydroxyl and carboxyl groups may act as trapping agents for the OH radicals. Moreover, the impact of OH radicals on N-acetyl-glucosamine, as constituent component of staphylococcus epidermidis biofilms, was investigated. The results show how impacts of OH radicals lead to hydrogen abstraction and subsequent molecular damage. This study thus provides new data on the reaction mechanisms of plasma species, and particularly the OH radicals, with fundamental components of bacterial biofilms.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000357195600019	Publication Date	2014-12-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1934-8630;1559-4106;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.603	Times cited	10	Open Access
	Notes				Approved	Most recent IF: 2.603; 2015 IF: 3.374
	Call Number	c:irua:121371			Serial	1492
Permanent link to this record



	Author	Ozkan, A.; Dufour, T.; Bogaerts, A.; Reniers, F.
	Title	How do the barrier thickness and dielectric material influence the filamentary mode and CO₂conversion in a flowing DBD?			Type	A1 Journal article
	Year	2016	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	25	Issue	25	Pages	045016
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Dielectric barrier discharges (DBDs) are commonly used to generate cold plasmas at atmospheric pressure. Whatever their configuration (tubular or planar), the presence of a dielectric barrier is mandatory to prevent too much charge build up in the plasma and the formation of a thermal arc. In this article, the role of the barrier thickness (2.0, 2.4 and 2.8 mm) and of the kind of dielectric material (alumina, mullite, pyrex, quartz) is investigated on the filamentary behavior in the plasma and on the CO2 conversion in a tubular flowing DBD, by means of mass spectrometry measurements correlated with electrical characterization and IR imaging. Increasing the barrier thickness decreases the capacitance, while preserving the electrical charge. As a result, the voltage over the dielectric increases and a larger number of microdischarges is generated, which enhances the CO2 conversion. Furthermore, changing the dielectric material of the barrier, while keeping the same geometry and dimensions, also affects the CO2 conversion. The highest CO2 conversion and energy efficiency are obtained for quartz and alumina, thus not following the trend of the relative permittivity. From the electrical characterization, we clearly demonstrate that the most important parameters are the somewhat higher effective plasma voltage (yielding a somewhat higher electric field and electron energy in the plasma) for quartz, as well as the higher plasma current (and thus larger electron density) and the larger number of microdischarge filaments (mainly for alumina, but also for quartz). The latter could be correlated to the higher surface roughness for alumina and to the higher voltage over the dielectric for quartz.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000380380200030	Publication Date	2016-06-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	24	Open Access
	Notes	The authors acknowledge financial support from the IAPVII/ 12, P7/34 (Inter-university Attraction Pole) program ‘PSI-Physical Chemistry of Plasma-Surface Interactions’, financially supported by the Belgian Federal Office for Science Policy (BELSPO). A. Ozkan would like to thank the financial support given by ‘Fonds David et Alice Van Buuren’.			Approved	Most recent IF: 3.302
	Call Number	c:irua:134396			Serial	4100
Permanent link to this record



	Author	Uytdenhouwen, Y.; Hereijgers, J.; Breugelmans, T.; Cool, P.; Bogaerts, A.
	Title	How gas flow design can influence the performance of a DBD plasma reactor for dry reforming of methane			Type	A1 Journal article
	Year	2021	Publication	Chemical Engineering Journal	Abbreviated Journal	Chem Eng J
	Volume	405	Issue		Pages	126618
	Keywords	A1 Journal article; Engineering sciences. Technology; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT); Applied Electrochemistry & Catalysis (ELCAT)
	Abstract	DBD plasma reactors are commonly used in a static ‘one inlet – one outlet’ design that goes against reactor design principles for multi-component reactions, such as dry reforming of methane (DRM). Therefore, in this paper we have developed a novel reactor design, and investigated how the shape and size of the reaction zone, as well as gradual gas addition, and the method of mixing CO2 and CH4 can influence the conversion and product com position of DRM. Even in the standard ‘one inlet – one outlet’ design, the direction of the gas flow (i.e. short or long path through the reactor, which defines the gas velocity at fixed residence time), as well as the dimensions of the reaction zone and the power delivery to the reactor, largely affect the performance. Using gradual gas addition and separate plasma activation zones for the individual gases give increased conversions within the same operational parameters, by optimising mixing ratios and kinetics. The choice of the main (pre-activated) gas and the direction of gas flow largely affect the conversion and energy cost, while the gas inlet position during separate addition only influences the product distribution.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000626511800005	Publication Date	2020-08-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.216	Times cited		Open Access	OpenAccess
	Notes	Interreg; Flanders; FWO; University of Antwerp; The authors acknowledge financial support from the European Fund for Regional Development through the cross-border collaborative Interreg V program Flanders-the Netherlands (project EnOp), the Fund 13 for Scientific Research (FWO; grant number: G.0254.14N), and an IOFSBO (SynCO2Chem) project from the University of Antwerp.			Approved	Most recent IF: 6.216
	Call Number	PLASMANT @ plasmant @c:irua:170609			Serial	6410
Permanent link to this record



	Author	Vertongen, R.; Bogaerts, A.
	Title	How important is reactor design for CO2 conversion in warm plasmas?			Type	A1 Journal Article
	Year	2023	Publication	Journal of CO2 Utilization	Abbreviated Journal
	Volume	72	Issue		Pages	102510
	Keywords	A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	In this work, we evaluated several new electrode configurations for CO2 conversion in a gliding arc plasmatron (GAP) reactor. Although the reactor design influences the performance, the best results give only slightly higher CO2 conversion than the basic GAP reactor design, which indicates that this reactor may have reached its performance limits. Moreover, we compared our results to those of four completely different plasma reactors, also operating at atmospheric pressure and with contact between the plasma and the electrodes. Surprisingly, the performance of all these warm plasmas is very similar (CO2 conversion around 10 % for an energy efficiency around 30 %). In view of these apparent performance limits regarding the reactor design, we believe further improvements should focus on other aspects, such as the post-plasma-region where the implementation of nozzles or a carbon bed are promising. We summarize the performance of our GAP reactor by comparing the energy efficiency and CO2 conversion for all different plasma reactors reported in literature. We can conclude that the GAP is not the best plasma reactor, but its operation at atmospheric pressure makes it appealing for industrial application. We believe that future efforts should focus on process design, techno-economic assessments and large-scale demonstrations: these will be crucial to assess the real industrial potential of this warm plasma technology
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001024970900001	Publication Date	2023-06-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2212-9820	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.7	Times cited		Open Access	Not_Open_Access
	Notes	We acknowledge financial support from the Fund for Scientific Research (FWO) Flanders (Grant ID 110221N) and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreements No 810182 – SCOPE ERC Synergy project and No. 101081162 — “PREPARE” ERC Proof of Concept project). We also thank I. Tsonev, P. Heirman, F. Girard-Sahun and G. Trenchev for the interesting discussions and practical help with the experiments, as well as J. Creel for his ideas on the inserted anode designs.			Approved	Most recent IF: 7.7; 2023 IF: 4.292
	Call Number	PLASMANT @ plasmant @c:irua:197044			Serial	8799
Permanent link to this record



	Author	Van der Paal, J.; Hong, S.-H.; Yusupov, M.; Gaur, N.; Oh, J.-S.; Short, R.D.; Szili, E.J.; Bogaerts, A.
	Title	How membrane lipids influence plasma delivery of reactive oxygen species into cells and subsequent DNA damage : an experimental and computational study			Type	A1 Journal article
	Year	2019	Publication	Physical chemistry, chemical physics	Abbreviated Journal	Phys Chem Chem Phys
	Volume	21	Issue	35	Pages	19327-19341
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The mechanisms of plasma in medicine are broadly attributed to plasma-derived reactive oxygen and nitrogen species (RONS). In order to exert any intracellular effects, these plasma-derived RONS must first traverse a major barrier in the cell membrane. The cell membrane lipid composition, and thereby the magnitude of this barrier, is highly variable between cells depending on type and state (e.g. it is widely accepted that healthy and cancerous cells have different membrane lipid compositions). In this study, we investigate how plasma-derived RONS interactions with lipid membrane components can potentially be exploited in the future for treatment of diseases. We couple phospholipid vesicle experiments, used as simple cell models, with molecular dynamics (MD) simulations of the lipid membrane to provide new insights into how the interplay between phospholipids and cholesterol may influence the response of healthy and diseased cell membranes to plasma-derived RONS. We focus on the (i) lipid tail saturation degree, (ii) lipid head group type, and (iii) membrane cholesterol fraction. Using encapsulated molecular probes, we study the influence of the above membrane components on the ingress of RONS into the vesicles, and subsequent DNA damage. Our results indicate that all of the above membrane components can enhance or suppress RONS uptake, depending on their relative concentration within the membrane. Further, we show that higher RONS uptake into the vesicles does not always correlate with increased DNA damage, which is attributed to ROS reactivity and lifetime. The MD simulations indicate the multifactorial chemical and physical processes at play, including (i) lipid oxidation, (ii) lipid packing, and (iii) lipid rafts formation. The methods and findings presented here provide a platform of knowledge that could be leveraged in the development of therapies relying on the action of plasma, in which the cell membrane and oxidative stress response in cells is targeted.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000486175400045	Publication Date	2019-08-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1463-9076; 1463-9084	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.123	Times cited	1	Open Access
	Notes				Approved	Most recent IF: 4.123
	Call Number	UA @ admin @ c:irua:162782			Serial	6303
Permanent link to this record



	Author	Huygh, S.; Bogaerts, A.; Neyts, E.C.
	Title	How Oxygen Vacancies Activate CO₂ Dissociation on TiO₂ Anatase (001)			Type	A1 Journal article
	Year	2016	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	120	Issue	120	Pages	21659-21669
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The adsorption, dissociation, and diffusion of CO2 on the anatase (001) surface was studied using DFT by means of the generalized gradient approximation using the Perdew−Burcke−Ernzerhof (PBE)-functional and applying corrections for long-range dispersion interactions. Different stable adsorption configurations were identified for the fully oxidized surface. The most stable adsorption configuration is the monodentated carbonate-like structure. Small energy barriers were identified for the conversion of a physisorbed to a chemisorbed configuration. CO2 dissociation is found to be unfeasible on the stoichiometric surface. The introduction of oxygen vacancy defects gives rise to new highly stable adsorption configurations with a stronger activation of the C−O bonds. This leads to the possibility of exothermic dissociation of CO2 with barriers up to 22.2 kcal/mol, corresponding to chemical lifetimes of less than 4 s at 300 K. These reactions cause a CO molecule to be formed, which will easily desorb, and the reduced surface to become oxidized. It is clear that oxygen vacancy defects play a key role in the catalytic activity of an anatase (001) surface. Oxygen vacancies play an important role in the dissociation of CO2 on the anatase (001) surface, and will play a significant role in complex problems, such as the catalytic conversion of CO2 to value-added chemicals.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000384626800055	Publication Date	2016-09-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	49	Open Access
	Notes	Stijn Huygh is funded as an aspirant of the Research Foundation Flanders (FWO, project number 11C0115N). This work was carried out using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen (UAntwerpen), a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI), and the UAntwerpen.			Approved	Most recent IF: 4.536
	Call Number	PLASMANT @ plasmant @ c:irua:136164			Serial	4291
Permanent link to this record



	Author	Uytdenhouwen, Y.; Bal, Km.; Michielsen, I.; Neyts, Ec.; Meynen, V.; Cool, P.; Bogaerts, A.
	Title	How process parameters and packing materials tune chemical equilibrium and kinetics in plasma-based CO2 conversion			Type	A1 Journal article
	Year	2019	Publication	Chemical engineering journal	Abbreviated Journal	Chem Eng J
	Volume	372	Issue		Pages	1253-1264
	Keywords	A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Plasma (catalysis) reactors are increasingly being used for gas-based chemical conversions, providing an alternative method of energy delivery to the molecules. In this work we explore whether classical concepts such as equilibrium constants, (overall) rate coefficients, and catalysis exist under plasma conditions. We specifically investigate the existence of a so-called partial chemical equilibrium (PCE), and how process parameters and packing properties influence this equilibrium, as well as the overall apparent rate coefficient, for CO2 splitting in a DBD plasma reactor. The results show that a PCE can be reached, and that the position of the equilibrium, in combination with the rate coefficient, greatly depends on the reactor parameters and operating conditions (i.e., power, pressure, and gap size). A higher power, higher pressure, or smaller gap size enhance both the equilibrium constant and the rate coefficient, although they cannot be independently tuned. Inserting a packing material (non-porous SiO2 and ZrO2 spheres) in the reactor reveals interesting gap/material effects, where the type of material dictates the position of the equilibrium and the rate (inhibition) independently. As a result, no apparent synergistic effect or plasma-catalytic behaviour was observed for the non-porous packing materials studied in this reaction. Within the investigated parameters, equilibrium conversions were obtained between 23 and 71%, while the rate coefficient varied between 0.027 s−1 and 0.17 s−1. This method of analysis can provide a more fundamental insight in the overall reaction kinetics of (catalytic) plasma-based gas conversion, in order to be able to distinguish plasma effects from true catalytic enhancement.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000471670400116	Publication Date	2019-05-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.216	Times cited	3	Open Access	Not_Open_Access: Available from 05.05.2021
	Notes	European Fund for Regional Development; FWOFWO, G.0254.14N ; University of Antwerp; FWO-FlandersFWO-Flanders, 11V8915N ; The authors acknowledge financial support from the European Fund for Regional Development through the cross-border collaborative Interreg V program Flanders-the Netherlands (project EnOp), the Fund for Scientific Research (FWO; Grant Number: G.0254.14N), a TOP-BOF project and an IOF-SBO (SynCO2Chem) project from the University of Antwerp. K. M. B. was funded as a PhD fellow (aspirant) of the FWOFlanders (Fund for Scientific Research-Flanders), Grant 11V8915N.			Approved	Most recent IF: 6.216
	Call Number	PLASMANT @ plasmant @UA @ admin @ c:irua:159979			Serial	5171
Permanent link to this record



	Author	Khalilov, U.; Bogaerts, A.; Xu, B.; Kato, T.; Kaneko, T.; Neyts, E.C.
	Title	How the alignment of adsorbed ortho H pairs determines the onset of selective carbon nanotube etching			Type	A1 Journal article
	Year	2017	Publication	Nanoscale	Abbreviated Journal	Nanoscale
	Volume	9	Issue	9	Pages	1653-1661
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Unlocking the enormous technological potential of carbon nanotubes strongly depends on our ability to specifically produce metallic or semiconducting tubes. While selective etching of both has already been demonstrated, the underlying reasons, however, remain elusive as yet. We here present computational and experimental evidence on the operative mechanisms at the atomic scale. We demonstrate that during the adsorption of H atoms and their coalescence, the adsorbed ortho hydrogen pairs on single-walled carbon nanotubes induce higher shear stresses than axial stresses, leading to the elongation of HC–CH bonds as a function of their alignment with the tube chirality vector, which we denote as the γ-angle. As a result, the C–C cleavage occurs more rapidly in nanotubes containing ortho H-pairs with a small γ-angle. This phenomenon can explain the selective etching of small-diameter semiconductor nanotubes with a similar curvature. Both theoretical and experimental results strongly indicate the important role of the γ-angle in the selective etching mechanisms of carbon nanotubes, in addition to the nanotube curvature and metallicity effects and lead us to clearly understand the onset of selective synthesis/removal of CNT-based materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000395422800036	Publication Date	2016-12-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2040-3364	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.367	Times cited	6	Open Access	OpenAccess
	Notes	U. K. gratefully acknowledges financial support from the Fund of Scientific Research Flanders (FWO), Belgium (Grant No. 12M1315N). This work was also supported in part by Grant-in- Aid for Young Scientists A (Grant No. 25706028), Grant-in-Aid for Scientific Research on Innovative Areas (Grant No. 26107502) from JSPS KAKENHI. This work was carried out in part using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen (UA), a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI) and the UA. The authors also thank Prof. A. C. T. van Duin for sharing the ReaxFF code and J. Razzokov for his assistance to perform the DFT calculations.			Approved	Most recent IF: 7.367
	Call Number	PLASMANT @ plasmant @ c:irua:140091			Serial	4417
Permanent link to this record



	Author	Maeyens, A.; Tempère, J.
	Title	How would a superconducting liquid flow in a magnetic field?			Type	A3 Journal article
	Year	2007	Publication	Europhysics news	Abbreviated Journal
	Volume	38	Issue	5	Pages	18
	Keywords	A3 Journal article; Theory of quantum systems and complex systems; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Petit-Lancy	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0531-7479	ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:66156			Serial	1496
Permanent link to this record



	Author	Baguer, N.; Bogaerts, A.; Gijbels, R.
	Title	Hybrid model for a cylindrical hollow cathode glow discharge and comparison with experiments			Type	A1 Journal article
	Year	2002	Publication	Spectrochimica acta: part B : atomic spectroscopy	Abbreviated Journal	Spectrochim Acta B
	Volume	57	Issue		Pages	311-326
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000174639800008	Publication Date	2002-10-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0584-8547;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.241	Times cited	31	Open Access
	Notes				Approved	Most recent IF: 3.241; 2002 IF: 2.695
	Call Number	UA @ lucian @ c:irua:40180			Serial	1521
Permanent link to this record