NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	301–330 of 381 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 >>

List View

Citations

Details

	Records
	Author	Smets, Q.; Verreck, D.; Verhulst, A.S.; Rooyackers, R.; Merckling, C.; Van De Put, M.; Simoen, E.; Vandervorst, W.; Collaert, N.; Thean, V.Y.; Sorée, B.; Groeseneken, G.; Heyns, M.M.;
	Title	InGaAs tunnel diodes for the calibration of semi-classical and quantum mechanical band-to-band tunneling models			Type	A1 Journal article
	Year	2014	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	115	Issue	18	Pages	184503-184509
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Promising predictions are made for III-V tunnel-field-effect transistor (FET), but there is still uncertainty on the parameters used in the band-to-band tunneling models. Therefore, two simulators are calibrated in this paper; the first one uses a semi-classical tunneling model based on Kane's formalism, and the second one is a quantum mechanical simulator implemented with an envelope function formalism. The calibration is done for In0.53Ga0.47As using several p+/intrinsic/n+ diodes with different intrinsic region thicknesses. The dopant profile is determined by SIMS and capacitance-voltage measurements. Error bars are used based on statistical and systematic uncertainties in the measurement techniques. The obtained parameters are in close agreement with theoretically predicted values and validate the semi-classical and quantum mechanical models. Finally, the models are applied to predict the input characteristics of In0.53Ga0.47As n- and p-lineTFET, with the n-lineTFET showing competitive performance compared to MOSFET.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000336919400048	Publication Date	2014-05-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;1089-7550;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	34	Open Access
	Notes	; Quentin Smets and Devin Verreck gratefully acknowledge the support of a Ph. D. stipend from IWT-Vlaanderen. This work was supported by imec's industrial affiliation program. The authors thank Kim Baumans, Johan Feyaerts, Johan De Cooman, Alireza Alian, and Jos Moonens for their support in process development; Bastien Douhard and Joris Delmotte for SIMS characterization; Alain Moussa for AFM characterization; Joris Van Laer and Tom Daenen for their support in electrical characterization; Kuo-Hsing Kao, Mehbuba Tanzid, and Ali Pourghaderi for their support in modeling. ;			Approved	Most recent IF: 2.068; 2014 IF: 2.183
	Call Number	UA @ lucian @ c:irua:118009			Serial	1667
Permanent link to this record



	Author	Milovanović, S.P.; Masir, M.R.; Peeters, F.M.
	Title	Magnetic electron focusing and tuning of the electron current with a pn-junction			Type	A1 Journal article
	Year	2014	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	115	Issue	4	Pages	043719-6
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Transverse magnetic focusing properties of graphene using a ballistic four terminal structure are investigated. The electric response is obtained using the semiclassical billiard model. The transmission exhibits pronounced peaks as a consequence of skipping orbits at the edge of the structure. When we add a pn-junction between the two probes, snake states along the pn-interface appear. Injected electrons are guided by the pn-interface to one of the leads depending on the value of the applied magnetic field. Oscillations in the resistance are found depending on the amount of particles that end up in each lead.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000331210800066	Publication Date	2014-01-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;1089-7550;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	21	Open Access
	Notes	This work was supported by the Flemish Science Foundation (FWO-Vl), the European Science Foundation (ESF) under the EUROCORES Program EuroGRAPHENE within the project CONGRAN, and the Methusalem Foundation of the Flemish government.			Approved	Most recent IF: 2.068; 2014 IF: 2.183
	Call Number	UA @ lucian @ c:irua:115801			Serial	1866
Permanent link to this record



	Author	Sen, H.S.; Sahin, H.; Peeters, F.M.; Durgun, E.
	Title	Monolayers of MoS2 as an oxidation protective nanocoating material			Type	A1 Journal article
	Year	2014	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	116	Issue	8	Pages	083508
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	First-principle calculations are employed to investigate the interaction of oxygen with ideal and defective MoS2 monolayers. Our calculations show that while oxygen atoms are strongly bound on top of sulfur atoms, the oxygen molecule only weakly interacts with the surface. The penetration of oxygen atoms and molecules through a defect-free MoS2 monolayer is prevented by a very high diffusion barrier indicating that MoS2 can serve as a protective layer for oxidation. The analysis is extended to WS2 and similar coating characteristics are obtained. Our calculations indicate that ideal and continuous MoS2 and WS2 monolayers can improve the oxidation and corrosion-resistance of the covered surface and can be considered as an efficient nanocoating material. (C) 2014 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution 3.0 Unported License.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000342821600017	Publication Date	2014-08-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;1089-7550;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	52	Open Access
	Notes	; This work was supported by the bilateral project between TUBITAK (through Grant No. 113T050) and Flemish Science Foundation (FWO-Vl). The calculations were performed at TUBITAK ULAKBIM, High Performance and Grid Computing Center (TR-Grid e-Infrastructure). E.D. acknowledges support from Bilim Akademisi-The Science Academy, Turkey under the BAGEP program. H.S. is supported by an FWO Pegasus-long Marie Curie Fellowship. ;			Approved	Most recent IF: 2.068; 2014 IF: 2.183
	Call Number	UA @ lucian @ c:irua:121101			Serial	2194
Permanent link to this record



	Author	Wen, D.-Q.; Zhang, Q.-Z.; Jiang, W.; Song, U.-H.; Bogaerts, A.; Wang, Y.-N.
	Title	Phase modulation in pulsed dual-frequency capacitively coupled plasmas			Type	A1 Journal article
	Year	2014	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	115	Issue	23	Pages	233303
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Particle-in-cell/Monte Carlo collision simulations, coupled with an external circuit, are used to investigate the behavior of pulsed dual-frequency (DF) capacitively coupled plasmas (CCPs). It is found that the phase shift θ between the high (or low) frequency source and the pulse modulation has a great influence on the ion density and the ionization rate. By pulsing the high frequency source, the time-averaged ion density shows a maximum when θ = 90∘. The time-averaged ion energy distribution functions (IEDFs) at the driven electrode, however, keep almost unchanged, illustrating the potential of pulsed DF-CCP for independent control of ion density (and flux) and ion energy. A detailed investigation of the temporal evolution of the plasma characteristics indicates that several high frequency harmonics can be excited at the initial stage of a pulse period by tuning the phase shift θ, and this gives rise to strong sheath oscillations, and therefore high ionization rates. For comparison, the pulsing of the low frequency source is also studied. In this case, the ion density changes slightly as a function of time, and the time-averaged ion density shows the same trend as in the HF modulation for different phase shifts θ. Moreover, the time-averaged IEDFs at the driven electrode can be modulated, showing the potential to reduce the maximum ion bombardment energy.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000338106000008	Publication Date	2014-06-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;1089-7550;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	8	Open Access
	Notes				Approved	Most recent IF: 2.068; 2014 IF: 2.183
	Call Number	UA @ lucian @ c:irua:117415			Serial	2585
Permanent link to this record



	Author	Verreck, D.; Van de Put, M.; Sorée, B.; Verhulst, A.S.; Magnus, W.; Vandenberghe, W.G.; Collaert, N.; Thean, A.; Groeseneken, G.
	Title	Quantum mechanical solver for confined heterostructure tunnel field-effect transistors			Type	A1 Journal article
	Year	2014	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	115	Issue	5	Pages	053706-53708
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Heterostructure tunnel field-effect transistors (HTFET) are promising candidates for low-power applications in future technology nodes, as they are predicted to offer high on-currents, combined with a sub-60 mV/dec subthreshold swing. However, the effects of important quantum mechanical phenomena like size confinement at the heterojunction are not well understood, due to the theoretical and computational difficulties in modeling realistic heterostructures. We therefore present a ballistic quantum transport formalism, combining a novel envelope function approach for semiconductor heterostructures with the multiband quantum transmitting boundary method, which we extend to 2D potentials. We demonstrate an implementation of a 2-band version of the formalism and apply it to study confinement in realistic heterostructure diodes and p-n-i-n HTFETs. For the diodes, both transmission probabilities and current densities are found to decrease with stronger confinement. For the p-n-i-n HTFETs, the improved gate control is found to counteract the deterioration due to confinement. (C) 2014 AIP Publishing LLC.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000331645900040	Publication Date	2014-02-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;1089-7550;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	15	Open Access
	Notes	; D. Verreck acknowledges the support of a Ph.D. stipend from the Institute for the Promotion of Innovation through Science and Technology in Flanders (IWT-Vlaanderen). This work was supported by imec's Industrial Affiliation Program. ;			Approved	Most recent IF: 2.068; 2014 IF: 2.183
	Call Number	UA @ lucian @ c:irua:115825			Serial	2780
Permanent link to this record



	Author	Moors, K.; Sorée, B.; Tokei, Z.; Magnus, W.
	Title	Resistivity scaling and electron relaxation times in metallic nanowires			Type	A1 Journal article
	Year	2014	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	116	Issue	6	Pages	063714
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We study the resistivity scaling in nanometer-sized metallic wires due to surface roughness and grain-boundaries, currently the main cause of electron scattering in nanoscaled interconnects. The resistivity has been obtained with the Boltzmann transport equation, adopting the relaxation time approximation of the distribution function and the effective mass approximation for the conducting electrons. The relaxation times are calculated exactly, using Fermi's golden rule, resulting in a correct relaxation time for every sub-band state contributing to the transport. In general, the relaxation time strongly depends on the sub-band state, something that remained unclear with the methods of previous work. The resistivity scaling is obtained for different roughness and grain-boundary properties, showing large differences in scaling behavior and relaxation times. Our model clearly indicates that the resistivity is dominated by grain-boundary scattering, easily surpassing the surface roughness contribution by a factor of 10. (C) 2014 AIP Publishing LLC.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000341179400036	Publication Date	2014-08-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;1089-7550;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	17	Open Access
	Notes	; ;			Approved	Most recent IF: 2.068; 2014 IF: 2.183
	Call Number	UA @ lucian @ c:irua:119260			Serial	2882
Permanent link to this record



	Author	Chen, Z.; Bogaerts, A.
	Title	Response to “Comment on 'Laser ablation of Cu and plume expansion into 1 atm ambient gas'” [J. Appl. Phys. 115, 166101 (2014)]			Type	Editorial
	Year	2014	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	115	Issue	16	Pages	166102
	Keywords	Editorial; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000335228400092	Publication Date	2014-05-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;1089-7550;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	1	Open Access
	Notes				Approved	Most recent IF: 2.068; 2014 IF: 2.183
	Call Number	UA @ lucian @ c:irua:117171			Serial	2898
Permanent link to this record



	Author	Kao, K.-H.; Verhulst, A.S.; Van de Put, M.; Vandenberghe, W.G.; Sorée, B.; Magnus, W.; De Meyer, K.
	Title	Tensile strained Ge tunnel field-effect transistors: k\cdot p material modeling and numerical device simulation			Type	A1 Journal article
	Year	2014	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	115	Issue	4	Pages	044505-44508
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Group IV based tunnel field-effect transistors generally show lower on-current than III-V based devices because of the weaker phonon-assisted tunneling transitions in the group IV indirect bandgap materials. Direct tunneling in Ge, however, can be enhanced by strain engineering. In this work, we use a 30-band k.p method to calculate the band structure of biaxial tensile strained Ge and then extract the bandgaps and effective masses at Gamma and L symmetry points in k-space, from which the parameters for the direct and indirect band-to-band tunneling (BTBT) models are determined. While transitions from the heavy and light hole valence bands to the conduction band edge at the L point are always bridged by phonon scattering, we highlight a new finding that only the light-holelike valence band is strongly coupling to the conduction band at the Gamma point even in the presence of strain based on the 30-band k.p analysis. By utilizing a Technology Computer Aided Design simulator equipped with the calculated band-to-band tunneling BTBT models, the electrical characteristics of tensile strained Ge point and line tunneling devices are self-consistently computed considering multiple dynamic nonlocal tunnel paths. The influence of field-induced quantum confinement on the tunneling onset is included. Our simulation predicts that an on-current up to 160 (260) mu A/mu m can be achieved along with on/off ratio > 10(6) for V-DD = 0.5V by the n-type (p-type) line tunneling device made of 2.5% biaxial tensile strained Ge. (C) 2014 AIP Publishing LLC.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000331210800113	Publication Date	2014-01-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;1089-7550;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	26	Open Access
	Notes	; Authors would like to thank Dr. Mohammad Ali Pourghaderi for useful discussions on the nonparabolicity. Authors would also like to thank Professor Eddy Simoen and Dr. Yosuke Shimura for useful discussions about the validity of modeled bandgaps and effective masses. This work was also supported by IMEC's Industrial Affiliation Program. ;			Approved	Most recent IF: 2.068; 2014 IF: 2.183
	Call Number	UA @ lucian @ c:irua:115800			Serial	3505
Permanent link to this record



	Author	Snoeck, E.; Van Tendeloo, G.
	Title	Networking strategies of the microscopy community for improved utilisation of advanced instruments : (3) two European initiatives to support TEM infrastructures and promote electron microscopy over Europe, ESTEEM (20062011) and ESTEEM 2 (20122016)			Type	A1 Journal article
	Year	2014	Publication	Comptes rendus : physique	Abbreviated Journal	Cr Phys
	Volume	15	Issue	2-3	Pages	281-284
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The ESTEEM consortium of electron microscopy laboratories for materials science and solid-state physics has been created as an EU-supported delocalized infrastructure (I3) to bring together the major electron microscopy centres in Europe. Its main objectives were to develop networking, to offer transnational access to these centres with specialized and complementary techniques and skills and to upgrade in close collaboration different technical and methodological aspects such as tomography, spectroscopy, holography, detectors, and specimen holders. These efforts were aimed to strengthen the position of European microscopy and to generate new technologies potentially of high relevance in many domains identified as strategic. Following the success of the first program, ESTEEM has been reconducted in 2012 for four more years with an enlarged set of partners.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Paris	Editor
	Language		Wos	000334013600017	Publication Date	2014-01-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1631-0705;	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	2.048	Times cited		Open Access
	Notes				Approved	Most recent IF: 2.048; 2014 IF: 2.035
	Call Number	UA @ lucian @ c:irua:115550			Serial	2293
Permanent link to this record



	Author	Bals, S.; Goris, B.; Altantzis, T.; Heidari, H.; Van Aert, S.; Van Tendeloo, G.
	Title	Seeing and measuring in 3D with electrons			Type	A1 Journal article
	Year	2014	Publication	Comptes rendus : physique	Abbreviated Journal	Cr Phys
	Volume	15	Issue	2-3	Pages	140-150
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Modern TEM enables the investigation of nanostructures at the atomic scale. However, TEM images are only two-dimensional (2D) projections of a three-dimensional (3D) object. Electron tomography can overcome this limitation. The technique is increasingly focused towards quantitative measurements and reaching atomic resolution in 3D has been the ultimate goal for many years. Therefore, one needs to optimize the acquisition of the data, the 3D reconstruction techniques as well as the quantification methods. Here, we will review a broad range of methodologies and examples. Finally, we will provide an outlook and will describe future challenges in the field of electron tomography.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Paris	Editor
	Language		Wos	000334013600005	Publication Date	2014-01-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1631-0705;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.048	Times cited	15	Open Access	OpenAccess
	Notes	(FWO;Belgium); European Research Council under the 7th Framework Program (FP7); ERC grant No.246791 – COUNTATOMS; ERC grant No.335078 – COLOURATOMS; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot);			Approved	Most recent IF: 2.048; 2014 IF: 2.035
	Call Number	UA @ lucian @ c:irua:113855			Serial	2960
Permanent link to this record



	Author	Verbeeck, J.; Guzzinati, G.; Clark, L.; Juchtmans, R.; Van Boxem, R.; Tian, H.; Béché, A.; Lubk, A.; Van Tendeloo, G.
	Title	Shaping electron beams for the generation of innovative measurements in the (S)TEM			Type	A1 Journal article
	Year	2014	Publication	Comptes rendus : physique	Abbreviated Journal	Cr Phys
	Volume	15	Issue	2-3	Pages	190-199
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	In TEM, a typical goal consists of making a small electron probe in the sample plane in order to obtain high spatial resolution in scanning transmission electron microscopy. In order to do so, the phase of the electron wave is corrected to resemble a spherical wave compensating for aberrations in the magnetic lenses. In this contribution, we discuss the advantage of changing the phase of an electron wave in a specific way in order to obtain fundamentally different electron probes opening up new applications in the (S)TEM. We focus on electron vortex states as a specific family of waves with an azimuthal phase signature and discuss their properties, production and applications. The concepts presented here are rather general and also different classes of probes can be obtained in a similar fashion, showing that electron probes can be tuned to optimize a specific measurement or interaction.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Paris	Editor
	Language		Wos	000334013600009	Publication Date	2014-02-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1631-0705;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.048	Times cited	22	Open Access
	Notes	Vortex ECASJO_;			Approved	Most recent IF: 2.048; 2014 IF: 2.035
	Call Number	UA @ lucian @ c:irua:116946UA @ admin @ c:irua:116946			Serial	2992
Permanent link to this record



	Author	Macke, S.; Radi, A.; Hamann-Borrero, J.E.; Verna, A.; Bluschke, M.; Brück, S.; Goering, E.; Sutarto, R.; He, F.; Cristiani, G.; Wu, M.; Benckiser, E.; Habermeier, H.-U.; Logvenov, G.; Gauquelin, N.; Botton, G.A; Kajdos, A.P.; Stemmer, S.; Sawatzky,G.A.; Haverkort, M.W.; Keimer, B.; Hinkov, V.
	Title	Element Specific Monolayer Depth Profiling			Type	A1 Journal Article
	Year	2014	Publication	Advanced Materials	Abbreviated Journal	Adv Mater
	Volume	26	Issue	38	Pages	6554-6559
	Keywords	A1 Journal Article; Electron Microscopy for Materials Science (EMAT)
	Abstract	The electronic phase behavior and functionality of interfaces and surfaces in complex materials are strongly correlated to chemical composition profiles, stoichiometry and intermixing. Here a novel analysis scheme for resonant X-ray reflectivity maps is introduced to determine such profiles, which is element specific and non-destructive, and which exhibits atomic-layer resolution and a probing depth of hundreds of nanometers.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000343763200004	Publication Date	2014-08-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1521-4095	ISBN		Additional Links
	Impact Factor	19.791	Times cited	34	Open Access
	Notes				Approved	Most recent IF: 19.791; 2014 IF: NA
	Call Number	EMAT @ emat @			Serial	4541
Permanent link to this record



	Author	Breynaert, E.; Emmerich, J.; Mustafa, D.; Bajpe, S.R.; Altantzis, T.; Van Havenbergh, K.; Taulelle, F.; Bals, S.; Van Tendeloo, G.; Kirschhock, C.E.A.; Martens, J.A.;
	Title	Enhanced self-assembly of metal oxides and metal-organic frameworks from precursors with magnetohydrodynamically induced long-lived collective spin states			Type	A1 Journal article
	Year	2014	Publication	Advanced materials	Abbreviated Journal	Adv Mater
	Volume	26	Issue	30	Pages	5173-5178
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Magneto-hydrodynamic generation of long-lived collective spin states and their impact on crystal morphology is demonstrated for three different, technologically relevant materials: COK-16 metal organic framework, manganese oxide nanotubes, and vanadium oxide nano-scrolls.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000340546300015	Publication Date	2014-06-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0935-9648;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	19.791	Times cited	7	Open Access	OpenAccess
	Notes	IAP-PAI; Marie Curie IEF; 262348 ESMI; 335078 COLOURATOM; 246791 COUNTATOMS; IWT; Methusalem; FWO; ECAS_Sara; (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:cannot);			Approved	Most recent IF: 19.791; 2014 IF: 17.493
	Call Number	UA @ lucian @ c:irua:118827			Serial	1053
Permanent link to this record



	Author	Zhang, G.; Turner, S.; Ekimov, E.A.; Vanacken, J.; Timmermans, M.; Samuely, T.; Sidorov, V.A.; Stishov, S.M.; Lu, Y.; Deloof, B.; Goderis, B.; Van Tendeloo, G.; Van de Vondel, J.; Moshchalkov, V.V.;
	Title	Global and local superconductivity in boron-doped granular diamond			Type	A1 Journal article
	Year	2014	Publication	Advanced materials	Abbreviated Journal	Adv Mater
	Volume	26	Issue	13	Pages	2034-2040
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Strong granularity-correlated and intragrain modulations of the superconducting order parameter are demonstrated in heavily boron-doped diamond situated not yet in the vicinity of the metal-insulator transition. These modulations at the superconducting state (SC) and at the global normal state (NS) above the resistive superconducting transition, reveal that local Cooper pairing sets in prior to the global phase coherence.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000333616700008	Publication Date	2013-12-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0935-9648;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	19.791	Times cited	34	Open Access
	Notes	Methusalem Funding; FWO projects; MP1201 COST Action; ERC Grant N246791-COUNTATOMS; post-doctoral grant (S.T.) and for project no. G.0568.10N.;Hercules Foundation			Approved	Most recent IF: 19.791; 2014 IF: 17.493
	Call Number	UA @ lucian @ c:irua:116150			Serial	1346
Permanent link to this record



	Author	Ovsyannikov, S.V.; Karkin, A.E.; Morozova, N.V.; Shchennikov, V.V.; Bykova, E.; Abakumov, A.M.; Tsirlin, A.A.; Glazyrin, K.V.; Dubrovinsky, L.
	Title	A hard oxide semiconductor with a direct and narrow bandgap and switchable pn electrical conduction			Type	A1 Journal article
	Year	2014	Publication	Advanced materials	Abbreviated Journal	Adv Mater
	Volume	26	Issue	48	Pages	8185-8191
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	An oxide semiconductor (perovskite-type Mn2O3) is reported which has a narrow and direct bandgap of 0.45 eV and a high Vickers hardness of 15 GPa. All the known materials with similar electronic band structures (e.g., InSb, PbTe, PbSe, PbS, and InAs) play crucial roles in the semiconductor industry. The perovskite-type Mn2O3 described is much stronger than the above semiconductors and may find useful applications in different semiconductor devices, e.g., in IR detectors.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000346480800016	Publication Date	2014-10-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0935-9648;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	19.791	Times cited	27	Open Access
	Notes				Approved	Most recent IF: 19.791; 2014 IF: 17.493
	Call Number	UA @ lucian @ c:irua:122230			Serial	1408
Permanent link to this record



	Author	Tian, H.; Verbeeck, J.; Brück, S.; Paul, M.; Kufer, D.; Sing, M.; Claessen, R.; Van Tendeloo, G.
	Title	Interface-induced modulation of charge and polarization in thin film Fe₃O₄			Type	A1 Journal article
	Year	2014	Publication	Advanced materials	Abbreviated Journal	Adv Mater
	Volume	26	Issue	3	Pages	461-465
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Charge and polarization modulations in Fe3O4 are controlled by taking advantage of interfacial strain effects. The feasibility of oxidation state control by strain modification is demonstrated and it is shown that this approach offers a stable configuration at room temperature. Direct evidence of how a local strain field changes the atomic coordination and introduces atomic displacements leading to polarization of Fe ions is presented.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000334289300011	Publication Date	2013-10-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0935-9648;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	19.791	Times cited	15	Open Access
	Notes	Vortex; FWO; Countatoms; Hercules ECASJO_;			Approved	Most recent IF: 19.791; 2014 IF: 17.493
	Call Number	UA @ lucian @ c:irua:112419UA @ admin @ c:irua:112419			Serial	1694
Permanent link to this record



	Author	Kundu, P.; Turner, S.; Van Aert, S.; Ravishankar, N.; Van Tendeloo, G.
	Title	Atomic structure of quantum gold nanowires : quantification of the lattice strain			Type	A1 Journal article
	Year	2014	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	8	Issue	1	Pages	599-606
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Theoretical studies exist to compute the atomic arrangement in gold nanowires and the influence on their electronic behavior with decreasing diameter. Experimental studies, e.g., by transmission electron microscopy, on chemically synthesized ultrafine wires are however lacking owing to the unavailability of suitable protocols for sample preparation and the stability of the wires under electron beam irradiation. In this work, we present an atomic scale structural investigation on quantum single crystalline gold nanowires of 2 nm diameter, chemically prepared on a carbon film grid. Using low dose aberration-corrected high resolution (S)TEM, we observe an inhomogeneous strain distribution in the crystal, largely concentrated at the twin boundaries and the surface along with the presence of facets and surface steps leading to a noncircular cross section of the wires. These structural aspects are critical inputs needed to determine their unique electronic character and their potential as a suitable catalyst material. Furthermore, electron-beam-induced structural changes at the atomic scale, having implications on their mechanical behavior and their suitability as interconnects, are discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000330542900061	Publication Date	2013-11-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	20	Open Access
	Notes	FWO; Countatoms; Hercules			Approved	Most recent IF: 13.942; 2014 IF: 12.881
	Call Number	UA @ lucian @ c:irua:113856			Serial	199
Permanent link to this record



	Author	Xu, X.; Vereecke, G.; Chen, C.; Pourtois, G.; Armini, S.; Verellen, N.; Tsai, W.K.; Kim, D.W.; Lee, E.; Lin, C.Y.; Van Dorpe, P.; Struyf, H.; Holsteyns, F.; Moshchalkov, V.; Indekeu, J.; De Gendt, S.;
	Title	Capturing wetting states in nanopatterned silicon			Type	A1 Journal article
	Year	2014	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	8	Issue	1	Pages	885-893
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Spectacular progress in developing advanced Si circuits with reduced size, along the track of Moore's law, has been relying on necessary developments in wet cleaning of nanopatterned Si wafers to provide contaminant free surfaces. The most efficient cleaning is achieved when complete wetting can be realized. In this work, ordered arrays of silicon nanopillars on a hitherto unexplored small scale have been used to study the wetting behavior on nanomodulated surfaces in a substantial range of surface treatments and geometrical parameters. With the use of optical reflectance measurements, the nanoscale water imbibition depths have been measured and the transition to the superhydrophobic Cassie-Baxter state has been accurately determined. For pillars of high aspect ratio (about 15), the transition occurs even when the surface is grafted with a hydrophilic functional group. We have found a striking consistent deviation between the contact angle measurements and the straightforward application of the classical wetting models. Molecular dynamics simulations show that these deviations can be attributed to the long overlooked atomic-scale surface perturbations that are introduced during the nanofabrication process. When the transition condition is approached, transient states of partial imbibition that characterize intermediate states between the Wenzel and Cassie-Baxter states are revealed in our experiments.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000330542900092	Publication Date	2013-12-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	39	Open Access
	Notes				Approved	Most recent IF: 13.942; 2014 IF: 12.881
	Call Number	UA @ lucian @ c:irua:114871			Serial	276
Permanent link to this record



	Author	Walter, A.L.; Sahin, H.; Jeon, K.J.; Bostwick, A.; Horzum, S.; Koch, R.; Speck, F.; Ostler, M.; Nagel, P.; Merz, M.; Schupler, S.; Moreschini, L.; Chang, Y.J.; Seyller, T.; Peeters, F.M.; Horn, K.; Rotenberg, E.;
	Title	Luminescence, patterned metallic regions, and photon-mediated electronic changes in single-sided fluorinated graphene sheets			Type	A1 Journal article
	Year	2014	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	8	Issue	8	Pages	7801-7808
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT)
	Abstract	Single-sided fluorination has been predicted to open an electronic band gap in graphene and to exhibit unique electronic and magnetic properties; however, this has not been substantiated by experimental reports. Our comprehensive experimental and theoretical study of this material on a SiC(0001) substrate shows that single-sided fluorographene exhibits two phases, a stable one with a band gap of similar to 6 eV and a metastable one, induced by UV irradiation, with a band gap of similar to 2.5 eV. The metastable structure, which reverts to the stable “ground-state” phase upon annealing under emission of blue light, in our view is induced by defect states, based on the observation of a nondispersive electronic state at the top of the valence band, not unlike that found in organic molecular layers. Our structural data show that the stable C2F ground state has a “boat” structure, in agreement with our X-ray magnetic circular dichroism data, which show the absence of an ordered magnetic phase. A high flux of UV or X-ray photons removes the fluorine atoms, demonstrating the possibility of lithographically patterning conducting regions into an otherwise semiconducting 2D material.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000340992300025	Publication Date	2014-08-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	23	Open Access
	Notes				Approved	Most recent IF: 13.942; 2014 IF: 12.881
	Call Number	UA @ lucian @ c:irua:119263			Serial	1857
Permanent link to this record



	Author	El-Gogary, R.I.; Rubio, N.; Wang, J.T.W.; Al-Jamal, W.T.; Bourgognon, M.; Kafa, H.; Naeem, M.; Klippstein, R.; Abbate, V.; Leroux, F.; Bals, S.; Van Tendeloo, G.; Kamel, A.O.; Awad, G.A.S.; Mortada, N.D.; Al-Jamal, K.T.;
	Title	Polyethylene glycol conjugated polymeric nanocapsules for targeted delivery of quercetin to folate-expressing cancer cells in vitro and in vivo			Type	A1 Journal article
	Year	2014	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	8	Issue	2	Pages	1384-1401
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	In this work we describe the formulation and characterization of chemically modified polymeric nanocapsules incorporating the anticancer drug, quercetin, for the passive and active targeting to tumors. Folic acid was conjugated to poly(lactide-co-glycolide) (PLGA) polymer to facilitate active targeting to cancer cells. Two different methods for the conjugation of PLGA to folic acid were employed utilizing polyethylene glycol (PEG) as a spacer. Characterization of the conjugates was performed using FTIR and H-1 NMR studies. The PEG and folk acid content was independent of the conjugation methodology employed. PEGylation has shown to reduce the size of the nanocapsule; moreover, zeta-potential was shown to be polymer-type dependent. Comparative studies on the cytotoxicity and cellular uptake of the different formulations by He La cells, in the presence and absence of excess folic acid, were carried out using MTT assay and Confocal Laser Scanning Microscopy, respectively. Both results confirmed the selective uptake and cytotoxicity of the folic acid targeted nanocapsules to the folate enriched cancer cells in a folate-dependent manner. Finally, the passive tumor accumulation and the active targeting of the nanocapsules to folate-expressing cells were confirmed upon intravenous administration in He La or IGROV-1 tumor-bearing mice. The developed nanocapsules provide a system for targeted delivery of a range of hydrophobic anticancer drugs in vivo.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000332059200032	Publication Date	2014-01-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	144	Open Access	Not_Open_Access
	Notes	290023 Raddel; 262348 Esmi; Iap-Pai			Approved	Most recent IF: 13.942; 2014 IF: 12.881
	Call Number	UA @ lucian @ c:irua:115862			Serial	2670
Permanent link to this record



	Author	Galván-Moya, J.E.; Altantzis, T.; Nelissen, K.; Peeters, F.M.; Grzelczak, M.; Liz-Marán, L.M.; Bals, S.; Van Tendeloo, G.
	Title	Self-organization of highly symmetric nanoassemblies : a matter of competition			Type	A1 Journal article
	Year	2014	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	8	Issue	4	Pages	3869-3875
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
	Abstract	The properties and applications of metallic nanoparticles are inseparably connected not only to their detailed morphology and composition but also to their structural configuration and mutual interactions. As a result, the assemblies often have superior properties as compared to individual nanoparticles. Although it has been reported that nanoparticles can form highly symmetric clusters, if the configuration can be predicted as a function of the synthesis parameters, more targeted and accurate synthesis will be possible. We present here a theoretical model that accurately predicts the structure and configuration of self-assembled gold nanoclusters. The validity of the model is verified using quantitative experimental data extracted from electron tomography 3D reconstructions of different assemblies. The present theoretical model is generic and can in principle be used for different types of nanoparticles, providing a very wide window of potential applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000334990600084	Publication Date	2014-03-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	34	Open Access	OpenAccess
	Notes	FWO; Methusalem; 246791 COUNTATOMS; 335078 COLOURATOM; 262348 ESMI; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 13.942; 2014 IF: 12.881
	Call Number	UA @ lucian @ c:irua:116955			Serial	2977
Permanent link to this record



	Author	Xu, P.; Dong, L.; Neek-Amal, M.; Ackerman, M.L.; Yu, J.; Barber, S.D.; Schoelz, J.K.; Qi, D.; Xu, F.; Thibado, P.M.; Peeters, F.M.;
	Title	Self-organized platinum nanoparticles on freestanding graphene			Type	A1 Journal article
	Year	2014	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	8	Issue	3	Pages	2697-2703
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT)
	Abstract	Freestanding graphene membranes were successfully functionalized with platinum nanoparticles (Pt NPs). High-resolution transmission electron microscopy revealed a homogeneous distribution of single-crystal Pt NPs that tend to exhibit a preferred orientation. Unexpectedly, the NPs were also found to be partially exposed to the vacuum with the top Pt surface raised above the graphene substrate, as deduced from atomic-scale scanning tunneling microscopy images and detailed molecular dynamics simulations. Local strain accumulation during the growth process is thought to be the origin of the NP self-organization. These findings are expected to shape future approaches in developing Pt NP catalysts for fuel cells as well as NP-functionalized graphene-based high-performance electronics.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000333539400085	Publication Date	2014-02-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	38	Open Access
	Notes	; M.N.A. acknowledges financial support by the EU-Marie Curie IIF postdoc Fellowship/299855. F.M.P. acknowledges financial support by the ESF-EuroGRAPHENE project CONGRAN, the Flemish Science Foundation (FWO-VI), and the Methusalem Foundation of the Flemish Government. L.D. acknowledges financial support by the Taishan Overseas Scholar program (tshw20091005), the International Science & Technology Cooperation Program of China (2014DFA60150), the National Natural Science Foundation of China (51172113), the Shandong Natural Science Foundation (JQ201118), the Qingdao Municipal Science and Technology Commission (12-1-4-136-hz), and the National Science Foundation (DMR-0821159). P.M.T. is thankful for the financial support of the Office of Naval Research under Grant No. N00014-10-1-0181 and the National Science Foundation under Grant No. DMR-0855358. ;			Approved	Most recent IF: 13.942; 2014 IF: 12.881
	Call Number	UA @ lucian @ c:irua:116881			Serial	2978
Permanent link to this record



	Author	Goris, B.; Turner, S.; Bals, S.; Van Tendeloo, G.
	Title	Three-dimensional valency mapping in ceria nanocrystals			Type	A1 Journal article
	Year	2014	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	8	Issue	10	Pages	10878-10884
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Using electron tomography combined with electron energy loss spectroscopy (EELS), we are able to map the valency of the Ce ions in CeO2-x nanocrystals in three dimensions. Our results show a clear facet-dependent reduction shell at the surface of ceria nanoparticles; {111} surface facets show a low surface reduction, whereas at {001} surface facets, the cerium ions are more likely to be reduced over a larger surface shell. Our generic tomographic technique allows a full 3D data cube to be reconstructed, containing an EELS spectrum in each voxel. This possibility enables a three-dimensional investigation of a plethora of material-specific physical properties such as valency, chemical composition, oxygen coordination, or bond lengths, triggering the synthesis of nanomaterials with improved properties.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000343952600126	Publication Date	2014-10-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	85	Open Access	OpenAccess
	Notes	335078 Colouratom; 246791 Countatoms; Fwo; 312483 Esteem2; esteem2jra4; ECASSara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 13.942; 2014 IF: 12.881
	Call Number	UA @ lucian @ c:irua:121219			Serial	3656
Permanent link to this record



	Author	Heyer, S.; Janssen, W.; Turner, S.; Lu, Y.-G.; Yeap, W.S.; Verbeeck, J.; Haenen, K.; Krueger, A.
	Title	Toward deep blue nano hope diamonds : heavily boron-doped diamond nanoparticles			Type	A1 Journal article
	Year	2014	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	8	Issue	6	Pages	5757-5764
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The production of boron-doped diamond nanoparticles enables the application of this material for a broad range of fields, such as electrochemistry, thermal management, and fundamental superconductivity research. Here we present the production of highly boron-doped diamond nanoparticles using boron-doped CVD diamond films as a starting material. In a multistep milling process followed by purification and surface oxidation we obtained diamond nanoparticles of 1060 nm with a boron content of approximately 2.3 × 1021 cm3. Aberration-corrected HRTEM reveals the presence of defects within individual diamond grains, as well as a very thin nondiamond carbon layer at the particle surface. The boron K-edge electron energy-loss near-edge fine structure demonstrates that the B atoms are tetrahedrally embedded into the diamond lattice. The boron-doped diamond nanoparticles have been used to nucleate growth of a boron-doped diamond film by CVD that does not contain an insulating seeding layer.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000338089200039	Publication Date	2014-04-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	71	Open Access
	Notes	the Research Foundation Flanders (FWO-Vlaanderen) (G.0555.10N;G.0568.10N; G.0456.12; G0044.13N and a postdoctoral scholarship for S.T.); EU FP7 through Marie Curie ITN “MATCON” (PITNGA-127 2009-238201)the Collaborative Project “DINAMO” (No. 245122) Integrated Infrastructure Initiative, Reference No. 312483-ESTEEM2.; esteem2_jra3			Approved	Most recent IF: 13.942; 2014 IF: 12.881
	Call Number	UA @ lucian @ c:irua:117599			Serial	3683
Permanent link to this record



	Author	Sun, M.; Rousse, G.; Abakumov, A.M.; Van Tendeloo, G.; Sougrati, M.-T.; Courty, M.; Doublet, M.-L.; Tarascon, J.-M.
	Title	An oxysulfate Fe₂O(SO₄)₂ electrode for sustainable Li-based batteries			Type	A1 Journal article
	Year	2014	Publication	Journal of the American Chemical Society	Abbreviated Journal	J Am Chem Soc
	Volume	136	Issue	36	Pages	12658-12666
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	High-performing Fe-based electrodes for Li-based batteries are eagerly pursued because of the abundance and environmental benignity of iron, with especially great interest in polyanionic compounds because of their flexibility in tuning the Fe3+/Fe2+ redox potential. We report herein the synthesis and structure of a new Fe-based oxysulfate phase, Fe2O(SO4)(2), made at low temperature from abundant elements, which electrochemically reacts with nearly 1.6 Li atoms at an average voltage of 3.0 V versus Li+/Li, leading to a sustained reversible capacity of similar to 125 mAh/g. The Li insertiondeinsertion process, the first ever reported in any oxysulfate, entails complex phase transformations associated with the position of iron within the FeO6 octahedra. This finding opens a new path worth exploring in the quest for new positive electrode materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000341544600029	Publication Date	2014-08-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0002-7863;1520-5126;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.858	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 13.858; 2014 IF: 12.113
	Call Number	UA @ lucian @ c:irua:119906			Serial	96
Permanent link to this record



	Author	Zaikina, J.V.; Batuk, M.; Abakumov, A.M.; Navrotsky, A.; Kauziarich, S.M.
	Title	Facile synthesis of Ba_1-xK_xFe₂As₂ superconductors via hydride route			Type	A1 Journal article
	Year	2014	Publication	Journal of the American Chemical Society	Abbreviated Journal	J Am Chem Soc
	Volume	136	Issue	48	Pages	16932-16939
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We have developed a fast, easy, and scalable synthesis method for Ba1xKxFe2As2 (0 ≤ x ≤ 1) superconductors using hydrides BaH2 and KH as a source of barium and potassium metals. Synthesis from hydrides provides better mixing and easier handling of the starting materials, consequently leading to faster reactions and/or lower synthesis temperatures. The reducing atmosphere provided by the evolved hydrogen facilitates preparation of oxygen-free powders. By a combination of methods we have shown that Ba1xKxFe2As2 obtained via hydride route has the same characteristics as when it is prepared by traditional solid-state synthesis. Refinement from synchrotron powder X-ray diffraction data confirms a linear dependence of unit cell parameters upon K content as well as the tetragonal to orthorhombic transition at low temperatures for compositions with x < 0.2. Magnetic measurements revealed dome-like dependence of superconducting transition temperature Tc upon K content with a maximum of 38 K for x close to 0.4. Electron diffraction and high-resolution high-angle annular dark-field scanning transmission electron microscopy indicates an absence of Ba/K ordering, while local inhomogeneity in the Ba/K distribution takes place at a scale of several angstroms along [110] crystallographic direction.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000345883900040	Publication Date	2014-11-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0002-7863;1520-5126;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.858	Times cited	13	Open Access
	Notes				Approved	Most recent IF: 13.858; 2014 IF: 12.113
	Call Number	UA @ lucian @ c:irua:121331			Serial	1169
Permanent link to this record



	Author	Yalcin, A.O.; Fan, Z.; Goris, B.; Li, W.F.; Koster, R.S.; Fang, C.M.; van Blaaderen, A.; Casavola, M.; Tichelaar, F.D.; Bals, S.; Van Tendeloo, G.; Vlugt, T.J.H.; Vanmaekelbergh, D.; Zandbergen, H.W.; van Huis, M.A.;
	Title	Atomic resolution monitoring of cation exchange in CdSe-PbSe heteronanocrystals during epitaxial solid-solid-vapor growth			Type	A1 Journal article
	Year	2014	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	14	Issue	6	Pages	3661-3667
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Here, we show a novel solidsolidvapor (SSV) growth mechanism whereby epitaxial growth of heterogeneous semiconductor nanowires takes place by evaporation-induced cation exchange. During heating of PbSe-CdSe nanodumbbells inside a transmission electron microscope (TEM), we observed that PbSe nanocrystals grew epitaxially at the expense of CdSe nanodomains driven by evaporation of Cd. Analysis of atomic-resolution TEM observations and detailed atomistic simulations reveals that the growth process is mediated by vacancies.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000337337100106	Publication Date	2014-05-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	42	Open Access	OpenAccess
	Notes	262348 Esmi; Fwo; 246791 Countatoms; 335078 Colouratom; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 12.712; 2014 IF: 13.592
	Call Number	UA @ lucian @ c:irua:117027			Serial	179
Permanent link to this record



	Author	Liakakos, N.; Gatel, C.; Blon, T.; Altantzis, T.; Lentijo-Mozo, S.; Garcia-Marcelot, C.; Lacroix, L.M.; Respaud, M.; Bals, S.; Van Tendeloo, G.; Soulantica, K.
	Title	CoFe nanodumbbells : synthesis, structure, and magnetic properties			Type	A1 Journal article
	Year	2014	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	14	Issue	5	Pages	2747-2754
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	We report the solution phase synthesis, the structural analysis, and the magnetic properties of hybrid nanostructures combining two magnetic metals. These nano-objects are characterized by a remarkable shape, combining Fe nanocubes on Co nanorods. The topological composition, the orientation relationship, and the growth steps have been studied by advanced electron microscopy techniques, such as HRTEM, electron tomography, and state-of-the-art 3-dimensional elemental mapping by EDX tomography. The soft iron nanocubes behave as easy nucleation centers that induce the magnetization reversal of the entire nanohybrid, leading to a drastic modification of the overall effective magnetic anisotropy.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000336074800080	Publication Date	2014-04-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	27	Open Access	OpenAccess
	Notes	The authors thank the ANR for the project “Batmag”, the French national project EMMA (ANR12 BS10 013 01), the European Commission for the FP7 NAMDIATREAM project (EU NMP4-LA-2010-246479), and the METSA network for the HRTEM. This has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative- I3). It was also supported by Programme Investissements d’Avenir under the program ANR-11-IDEX-0002-02, reference ANR-10-LABX-0037-NEXT. The authors acknowledge financial support from European Research Council (ERC Advanced Grant # 24691-COUNTATOMS and ERC Starting Grant # 335078-COLOURATOMS).; esteem2ta; ECASSara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 12.712; 2014 IF: 13.592
	Call Number	UA @ lucian @ c:irua:116953			Serial	377
Permanent link to this record



	Author	Hutter, E.M.; Bladt, E.; Goris, B.; Pietra, F.; van der Bok, J.C.; Boneschanscher, M.P.; de Donega, C.M.; Bals, S.; Vanmaekelbergh, D.
	Title	Conformal and atomic characterization of ultrathin CdSe platelets with a helical shape			Type	A1 Journal article
	Year	2014	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	14	Issue	11	Pages	6257-6262
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Currently, ultrathin colloidal CdSe semiconductor nanoplatelets (NPLs) with a uniform thickness that is controllable up to the atomic scale can be prepared. The optical properties of these 2D semiconductor systems are the subject of extensive research. Here, we reveal their natural morphology and atomic arrangement. Using cryo-TEM (cryo-transmission electron microscopy), we show that the shape of rectangular NPLs in solution resembles a helix. Fast incorporation of these NPLs in silica preserves and immobilizes their helical shape, which allowed us to perform an in-depth study by high angle annular dark field scanning transmission electron microscopy (HAADF-STEM). Electron tomography measurements confirm and detail the helical shape of these systems. Additionally, high-resolution HAADF-STEM shows the thickness of the NPLs on the atomic scale and furthermore that these are consistently folded along a ?110? direction. The presence of a silica shell on both the top and bottom surfaces shows that Cd atoms must be accessible for silica precursor (and ligand) molecules on both sides.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000345723800036	Publication Date	2014-10-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	43	Open Access	OpenAccess
	Notes	Dariusz Mitoraj, Hans Meeldijk, Relinde van Dijk-Moes, and Stephan Zevenhuizen are acknowledged for technical support and help with some experiments. The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP/2007-2013)/ERC Grant Agreement no. 291667. The authors acknowledge financial support from FOM and NOW [FOM program Functional NanoParticle Solids (FNPS)]. S.B. acknowledges financial support from European Research Council (ERC Starting Grant #335078- COLOURATOMS). E.B. and B.G. gratefully acknowledge financial support by the Flemish Fund for Scientific Research (FWO Vlaanderen).; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 12.712; 2014 IF: 13.592
	Call Number	UA @ lucian @ c:irua:122209			Serial	490
Permanent link to this record



	Author	Shen, Y.; Turner, S.; Yang, P.; Van Tendeloo, G.; Lebedev, O.I.; Wu, T.
	Title	Epitaxy-enabled vapor-liquid-solid growth of tin-doped indium oxide nanowires with controlled orientations			Type	A1 Journal article
	Year	2014	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	14	Issue	8	Pages	4342-4351
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Controlling the morphology of nanowires in bottom-up synthesis and assembling them on planar substrates is of tremendous importance for device applications in electronics, photonics, sensing and energy conversion. To date, however, there remain challenges in reliably achieving these goals of orientation-controlled nanowire synthesis and assembly. Here we report that growth of planar, vertical and randomly oriented tin-doped indium oxide (ITO) nanowires can be realized on yttria-stabilized zirconia (YSZ) substrates via the epitaxy-assisted vaporliquidsolid (VLS) mechanism, by simply regulating the growth conditions, in particular the growth temperature. This robust control on nanowire orientation is facilitated by the small lattice mismatch of 1.6% between ITO and YSZ. Further control of the orientation, symmetry and shape of the nanowires can be achieved by using YSZ substrates with (110) and (111), in addition to (100) surfaces. Based on these insights, we succeed in growing regular arrays of planar ITO nanowires from patterned catalyst nanoparticles. Overall, our discovery of unprecedented orientation control in ITO nanowires advances the general VLS synthesis, providing a robust epitaxy-based approach toward rational synthesis of nanowires.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000340446200022	Publication Date	2014-06-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	33	Open Access
	Notes	European Union Seventh Framework Programme under Grant 312483 – ESTEEM; FWOl; esteem2_ta			Approved	Most recent IF: 12.712; 2014 IF: 13.592
	Call Number	UA @ lucian @ c:irua:118622			Serial	1075
Permanent link to this record