NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	1–30 of 607 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 >>

List View

Citations

Details

	Records
	Author	Shi, X.; Ronsse, F.; Roegiers, J.; Pieters, J.G.
	Title	3D Eulerian-Eulerian modeling of a screw reactor for biomass thermochemical conversion. Part 1: solids flow dynamics and back-mixing			Type	A1 Journal article
	Year	2019	Publication	Renewable energy	Abbreviated Journal
	Volume	143	Issue		Pages	1465-1476
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Three-dimensional (3D) computational fluid dynamics (CFD) simulations were performed to study solids flow dynamics and solids back-mixing behavior in a screw reactor (designed for thermal conversion of dry biomass particles) based on the Eulerian-Eulerian method. Simulation results were compared against experimental data with respect to filling degree and mean residence time of particles. The mean deviations for filling degree and for mean residence time between simulation and experiment were about 0.01 and 11.4 s, respectively, which shows that the model is reasonably accurate in predicting solids flow behavior in the screw reactor. The solids flow dynamics inside the reactor were discussed. The solids residence time distribution (RTD) was calculated and the degree of solids back-mixing in the forward transportation direction of the reactor was analyzed. It was found that solids being flung over the shaft and solids back-leakage, resulting from the low solids forward transportation velocity at the clearance between the flight and the bottom shell of the screw reactor, were responsible for solids back-mixing. The degree of solids back-mixing can be reduced at higher screw rotating speeds when keeping inlet mass flow rate of solids constant. (C) 2019 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000482686100039	Publication Date	2019-05-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0960-1481	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:162757			Serial	7384
Permanent link to this record



	Author	Weiβ, R.; Gritsch, S.; Brader, G.; Nikolic, B.; Spiller, M.; Santolin, J.; Weber, H.K.; Schwaiger, N.; Pluchon, S.; Dietel, K.; Guebitz, G.; Nyanhongo, G.
	Title	A biobased, bioactive, low CO₂ impact coating for soil improvers			Type	A1 Journal article
	Year	2021	Publication	Green Chemistry	Abbreviated Journal	Green Chem
	Volume	23	Issue	17	Pages	6501-6514
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Lignosulfonate-based bioactive coatings as soil improvers for lawns were developed using laccase as a biocatalyst. Incorporation of glycerol, xylitol and sorbitol as plasticizers considerably reduced the brittleness of the synthesized coatings of marine carbonate granules while thermal enzyme inactivation at 100 degrees C enabled the production of stable coatings. Heat inactivation produced stable coatings with a molecular weight of 2000 kDa and a viscosity of 4.5 x 10(-3) Pas. The desired plasticity for the spray coating of soil improver granules was achieved by the addition of 2.7% of xylitol. Agriculture beneficial microorganisms (four different Bacillus species) were integrated into the coatings. The stable coatings protected the marine calcium carbonate granules, maintained the viability of the microorganisms and showed no toxic effects on the germination and growth of model plants including corn, wheat, salad, and tomato despite a slight delay in germination. Moreover, the coatings reduced the dust formation of soil improvers by 70%. CO2 emission analysis showed potential for the reduction of up to 3.4 kg CO2-eq. kg(-1) product, making it a viable alternative to fossil-based coatings.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000683056500001	Publication Date	2021-08-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1463-9262; 1463-9270	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.125	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 9.125
	Call Number	UA @ admin @ c:irua:180511			Serial	7558
Permanent link to this record



	Author	Gielis, J.; Caratelli, D.; Fougerolle, Y.; Ricci, P.E.; Gerats, T.
	Title	A biogeometrical model for corolla fusion in Asclepiad flowers			Type	H1 Book chapter
	Year	2017	Publication		Abbreviated Journal
	Volume	2	Issue		Pages	83-105 T2 - Modeling in mathematics : proceedings
	Keywords	H1 Book chapter; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The molecular genetics of flower development have been studied extensively for more than two decades. Fusion of organs and the tendency to oligomery, important characteristics of flower evolution, so far have remained fairly elusive. We present a geometric model for shape and fusion in the corolla of Asclepiads. Examples demonstrate how fusion of petals creates stable centers, a prerequisite for the formation of complex pollination structures via congenital and postgenital fusion events, with the formation of de novo organs, specific to Asclepiads. The development of the corolla reduces to simple inequalities from the MATHS-BOX. The formation of stable centers and of bell and tubular shapes in flowers are immediate and logical consequences of the shape. Our model shows that any study on flowers, especially in evo-devo perspective should be performed within the wider framework of polymery and oligomery and of fusion and synorganization.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000442076400007	Publication Date	2017-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN	978-94-6239-260-1; 978-94-6239-261-8; 2543-0300; 978-94-6239-260-1	Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:144551			Serial	7561
Permanent link to this record



	Author	Xie, Y.; Spiller, M.; Vlaeminck, S.E.
	Title	A bioreactor and nutrient balancing approach for the conversion of solid organic fertilizers to liquid nitrate-rich fertilizers : mineralization and nitrification performance complemented with economic aspects			Type	A1 Journal article
	Year	2022	Publication	The science of the total environment	Abbreviated Journal	Sci Total Environ
	Volume	806	Issue		Pages	150415
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Due to the high water- and nutrient-use efficiency, hydroponic cultivation is increasingly vital in progressing to environment-friendly food production. To further alleviate the environmental impacts of synthetic fertilizer production, the use of recovered nutrients should be encouraged in horticulture and agriculture at large. Solid organic fertilizers can largely contribute to this, yet their physical and chemical nature impedes application in hydroponics. This study proposes a bioreactor for mineralization and nitrification followed by a supplementation step for limiting macronutrients to produce nitrate-based solutions from solid fertilizers, here based on a novel microbial fertilizer. Batch tests showed that aerobic conversions at 35 °C could realize a nitrate (NO₃−-N) production efficiency above 90% and a maximum rate of 59 mg N L−1 d−1. In the subsequent bioreactor test, nitrate production efficiencies were lower (44–51%), yet rates were higher (175–212 mg N L−1 d−1). Calcium and magnesium hydroxide were compared to control the bioreactor pH at 6.0 ± 0.2, while also providing macronutrients for plant production. A mass balance estimation to mimic the Hoagland nutrient solution showed that 92.7% of the NO₃−-N in the Ca(OH)₂ scenario could be organically sourced, while this was only 37.4% in the Mg(OH)₂ scenario. Besides, carbon dioxide (CO₂) generated in the bioreactor can be used for greenhouse carbon fertilization to save operational expenditure (OPEX). An estimation of the total OPEX showed that the production of a nutrient solution from solid organic fertilizers can be cost competitive compared to using commercially available liquid inorganic fertilizer solutions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000707640400021	Publication Date	2021-09-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0048-9697	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.8	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 9.8
	Call Number	UA @ admin @ c:irua:181787			Serial	7132
Permanent link to this record



	Author	Baetens, D.; Schoofs, K.; Somers, N.; Denys, S.
	Title	A brief review on Multiphysics modelling of the various physical and chemical phenomena occurring in active oxidation reactors			Type	A1 Journal article
	Year	2023	Publication	Current opinion in green and sustainable chemistry	Abbreviated Journal
	Volume	40	Issue		Pages	100764-100766
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Heterogeneous photocatalysis can be used as an advanced oxidation technology frequently studied for application in photoreactors for air and water treatment. Extensive experimental investigation entails high costs and is also time consuming. Multiphysics modelling, a relatively new numerical method, provides a cost-effective and valuable alternative. By reconstructing the reactor geometry in dedicated software, meshing it and solving for occurring physical and chemical phenomena, Multiphysics models can be used to evaluate the performance of different reactor designs, increase insight into the occurring phenomena and study the influence of operational parameters on reactor performance. Finally, Multiphysics models are also developed for various applications like optimising the operational parameters, creating the ideal reactor design or scaling up a lab-scale reactor to a realistic prototype.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000947344000001	Publication Date	2023-02-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2452-2236	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	9.3	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 9.3; 2023 IF: NA
	Call Number	UA @ admin @ c:irua:195208			Serial	7278
Permanent link to this record



	Author	Wang, Y.-T.; Wu, S.-M.; Luo, G.-Q.; Tian, G.; Wang, L.-Y.; Xiao, S.-T.; Wu, J.-X.; Wu, A.; Wu, K.-J.; Lenaerts, S.; Yang, X.-Y.
	Title	A core-shell confined Pd@TS-1 @meso-SiO2 catalyst and its synergy effect on styrene oxidation			Type	A1 Journal article
	Year	2023	Publication	Applied catalysis : A : general	Abbreviated Journal
	Volume	650	Issue		Pages	119016-6
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Dual active sites from acidic zeolite and Pd are not only capable of catalyzing multiple type of reactions, but could also generate unique functions owing to the synergy between metals and acidic sites. However, there are only a few reports on the investigation of the synergy of acid/Pd dual sites in TS-1. Herein, TS-1 confined Pd catalyst with mesoporous silica shell (Pd@TS-1 @meso-SiO2) has been successfully synthesized and its synergy effect contributes to the enhanced conversion rate (19.2%) and selectivity (74.7%) on styrene oxidation. The interaction between Pd and TS-1 has been investigated by EPR and 1H NMR techniques, the experimental measurements show an obvious change in the signal distribution of weakly acidic terminal hydroxyls and hydrogen-bonding silanols. The schematic illustration of selective styrene oxidation in the model of Pd@TS-1 @meso-SiO2 is proposed to clarify the synergistic effect on styrene oxidation between TS-1 and Pd nanoparticles at an atomic-/nanoscale.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001015700000001	Publication Date	2022-12-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-860x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.5	Times cited		Open Access	Not_Open_Access
	Notes				Approved	Most recent IF: 5.5; 2023 IF: 4.339
	Call Number	UA @ admin @ c:irua:197805			Serial	8826
Permanent link to this record



	Author	Bollen, E.; Pagan, B.R.; Kuijpers, B.; Van Hoey, S.; Desmet, N.; Hendrix, R.; Dams, J.; Seuntjens, P.
	Title	A database system for querying of river networks : facilitating monitoring and prediction applications			Type	A1 Journal article
	Year	2021	Publication	Water Science And Technology-Water Supply	Abbreviated Journal	Water Sci Tech-W Sup
	Volume		Issue		Pages
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The increasing availability of real-time in situ measurements and remote sensing observations have the potential to contribute to the optimization of water resources management. Global challenges such as climate change, intensive agriculture and urbanization put a high pressure on our water resources. Due to recent innovations in measuring both water quantity and quality, river systems can now be monitored in real time at an unprecedented spatial and temporal scale. To interpret the sensor measurements and remote sensing observations additional data for example on: the location of the measurement, upstream and downstream catchment characteristics, horizontal ellipsis are required. In this paper, we present a data management system to support flow-path related functionality for decision making and prediction modelling. Adding meta data sets and facilitating (near) real-time processing of sensor data questions are key concepts for the systems. The potential of the database framework for hydrological applications is demonstrated using different applications for the river system of Flanders. In one, the database framework is used to simulate the daily discharge for each segment within a catchment using a simple data-driven approach. The presented system is useful for numerous applications including pollution tracking, alerting and inter-sensor validation in river systems, or related networks.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000729755100001	Publication Date	2021-12-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1606-9749	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	0.573	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 0.573
	Call Number	UA @ admin @ c:irua:184814			Serial	7387
Permanent link to this record



	Author	De Baere, K.; Verstraelen, H.; Lemmens, L.; Lenaerts, S.; Dewil, R.; Van Ingelgem, Y.; Potters, G.
	Title	A field study of the effectiveness of sacrificial anodes in ballast tanks of merchant ships			Type	A1 Journal article
	Year	2014	Publication	Journal of marine science and technology	Abbreviated Journal	J Mar Sci Tech-Japan
	Volume	19	Issue	1	Pages	116-123
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Sacrificial anodes have become a standard practice for the protection of ballast tanks of merchant vessels against corrosive damage. A well protected tank should extend the life span of a ship and consequently enhances its economic value. An in situ survey comprising more than 100 merchant vessels provided the opportunity to measure the impact of these anodes on the life expectancy of these vessels. Contrary to the general belief of these anodes beneficial effect, no significant difference was found in our observations in terms of corrosion occurrence between ship populations with and without sacrificial anodes, across all ship ages. This may be explained by the highly variable conditions and the complex geometry in a ballast tank severely impede optimal and straightforward installation of these anodes in these tanks. Also, poorly placed anodes in it may harm the integrity of the coating of the tank. We therefore plead for uniform and clear rules on anode installation and inspection.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000332693300008	Publication Date	2013-07-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0948-4280	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	0.838	Times cited	3	Open Access
	Notes	; This work was financed by a BOF Academisation grant of the University of Antwerp and the Antwerp Maritime Academy. ;			Approved	Most recent IF: 0.838; 2014 IF: 0.805
	Call Number	UA @ admin @ c:irua:109348			Serial	5953
Permanent link to this record



	Author	Lindeboom, R.E.F.; De Paepe, J.; Vanoppen, M.; Alonso-Fariñas, B.; Coessens, W.; Alloul, A.; Christiaens, M.E.R.; Dotremont, C.; Beckers, H.; Lamaze, B.; Demey, D.; Clauwaert, P.; Verliefde, A.R.D.; Vlaeminck, S.E.
	Title	A five-stage treatment train for water recovery from urine and shower water for long-term human Space missions			Type	A1 Journal article
	Year	2020	Publication	Desalination	Abbreviated Journal	Desalination
	Volume	495	Issue		Pages	114634
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Long-term human Space missions will rely on regenerative life support as resupply of water, oxygen and food comes with constraints. The International Space Station (ISS) relies on an evaporation/condensation system to recover 74–85% of the water in urine, yet suffers from repetitive scaling and biofouling while employing hazardous chemicals. In this study, an alternative non-sanitary five-stage treatment train for one “astronaut” was integrated through a sophisticated monitoring and control system. This so-called Water Treatment Unit Breadboard (WTUB) successfully treated urine (1.2-L-d−1) with crystallisation, COD-removal, ammonification, nitrification and electrodialysis, before it was mixed with shower water (3.4-L-d−1). Subsequently, ceramic nanofiltration and single-pass flat-sheet RO were used. A four-months proof-of-concept period yielded: (i) chemical water quality meeting the hygienic standards of the European Space Agency, (ii) a 87-±-5% permeate recovery with an estimated theoretical primary energy requirement of 0.2-kWhp-L−1, (iii) reduced scaling potential without anti-scalant addition and (iv) and a significant biological reduction in biofouling potential resulted in stable but biofouling-limited RO permeability of 0.5 L-m−2-h−1-bar−1. Estimated mass breakeven dates and a comparison with the ISS Water Recovery System for a hypothetical Mars transit mission show that WTUB is a promising biological membrane-based alternative to heat-based systems for manned Space missions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000582172900007	Publication Date	2020-09-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0011-9164	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.9	Times cited		Open Access
	Notes				Approved	Most recent IF: 9.9; 2020 IF: 5.527
	Call Number	UA @ admin @ c:irua:171514			Serial	6523
Permanent link to this record



	Author	Shi, P.; Ratkowsky, D.A.; Li, Y.; Zhang, L.; Lin, S.; Gielis, J.
	Title	A general leaf area geometric formula exists for plants evidence from the simplified Gielis equation			Type	A1 Journal article
	Year	2018	Publication	Forests (19994907)	Abbreviated Journal
	Volume	9	Issue	11	Pages	714
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Plant leaves exhibit diverse shapes that enable them to utilize a light resource maximally. If there were a general parametric model that could be used to calculate leaf area for different leaf shapes, it would help to elucidate the adaptive evolutional link among plants with the same or similar leaf shapes. We propose a simplified version of the original Gielis equation (SGE), which was developed to describe a variety of object shapes ranging from a droplet to an arbitrary polygon. We used this equation to fit the leaf profiles of 53 species (among which, 48 bamboo plants, 5 woody plants, and 10 geographical populations of a woody plant), totaling 3310 leaves. A third parameter (namely, the floating ratio c in leaf length) was introduced to account for the case when the theoretical leaf length deviates from the observed leaf length. For most datasets, the estimates of c were greater than zero but less than 10%, indicating that the leaf length predicted by the SGE was usually smaller than the actual length. However, the predicted leaf areas approximated their actual values after considering the floating ratios in leaf length. For most datasets, the mean percent errors of leaf areas were lower than 6%, except for a pooled dataset with 42 bamboo species. For the elliptical, lanceolate, linear, obovate, and ovate shapes, although the SGE did not fit the leaf edge perfectly, after adjusting the parameter c, there were small deviations of the predicted leaf areas from the actual values. This illustrates that leaves with different shapes might have similar functional features for photosynthesis, since the leaf areas can be described by the same equation. The anisotropy expressed as a difference in leaf shape for some plants might be an adaptive response to enable them to adapt to different habitats.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000451310300054	Publication Date	2018-11-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1999-4907	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:156324			Serial	7389
Permanent link to this record



	Author	Lian, M.; Shi, P.; Zhang, L.; Yao, W.; Gielis, J.; Niklas, K.J.
	Title	A generalized performance equation and its application in measuring the Gini index of leaf size inequality			Type	A1 Journal article
	Year	2023	Publication	Trees: structure and function	Abbreviated Journal
	Volume	37	Issue		Pages	1555-1565
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The goal of this study is to provide a rigorous tool to quantify the inequality of the leaf size distribution of an individual plant, thereby serving as a reference trait for quantifying plant adaptations to local environmental conditions. The tool to be presented and tested employs three components: (1) a performance equation (PE), which can produce flexible asymmetrical and symmetrical bell-shaped curves, (2) the Lorenz curve (i.e., the cumulative proportion of leaf size vs. the cumulative proportion of number of leaves), which is the basis for calculating, and (3) the Gini index, which measures the inequality of leaf size distribution. We sampled 12 individual plants of a dwarf bamboo and measured the area and dry mass of each leaf of each plant. We then developed a generalized performance equation (GPE) of which the PE is a special case and fitted the Lorenz curve to leaf size distribution using the GPE and PE. The GPE performed better than the PE in fitting the Lorenz curve. We compared the Gini index of leaf area distribution with that of leaf dry mass distribution and found that there was a significant difference between the two indices that might emerge from the scaling relationship between leaf dry mass and area. Nevertheless, there was a strong correlation between the two Gini indices (r2 = 0.9846). This study provides a promising tool based on the GPE for quantifying the inequality of leaf size distributions across individual plants and can be used to quantify plant adaptations to local environmental conditions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001069570200001	Publication Date	2023-08-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0931-1890; 1432-2285	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.3	Times cited		Open Access	Not_Open_Access: Available from 26.02.2024
	Notes				Approved	Most recent IF: 2.3; 2023 IF: 1.842
	Call Number	UA @ admin @ c:irua:199562			Serial	8874
Permanent link to this record



	Author	Lin, S.; Zhang, L.; Reddy, G.V.P.; Hui, C.; Gielis, J.; Ding, Y.; Shi, P.
	Title	A geometrical model for testing bilateral symmetry of bamboo leaf with a simplified Gielis equation			Type	A1 Journal article
	Year	2016	Publication	Ecology and evolution	Abbreviated Journal
	Volume	6	Issue	19	Pages	6798-6806
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The size and shape of plant leaves change with growth, and an accurate description of leaf shape is crucial for describing plant morphogenesis and development. Bilateral symmetry, which has been widely observed but poorly examined, occurs in both dicot and monocot leaves, including all nominated bamboo species (approximately 1,300 species), of which at least 500 are found in China. Although there are apparent differences in leaf size among bamboo species due to genetic and environmental profiles, bamboo leaves have bilateral symmetry with parallel venation and appear similar across species. Here, we investigate whether the shape of bamboo leaves can be accurately described by a simplified Gielis equation, which consists of only two parameters (leaf length and shape) and produces a perfect bilateral shape. To test the applicability of this equation and the occurrence of bilateral symmetry, we first measured the leaf length of 42 bamboo species, examining >500 leaves per species. We then scanned 30 leaves per species that had approximately the same length as the median leaf length for that species. The leaf-shape data from scanned profiles were fitted to the simplified Gielis equation. Results confirmed that the equation fits the leaf-shape data extremely well, with the coefficients of determination being 0.995 on average. We further demonstrated the bilateral symmetry of bamboo leaves, with a clearly defined leaf-shape parameter of all 42 bamboo species investigated ranging from 0.02 to 0.1. This results in a simple and reliable tool for precise determination of bamboo species, with applications in forestry, ecology, and taxonomy.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000385626100003	Publication Date	2016-09-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2045-7758	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:144547			Serial	7998
Permanent link to this record



	Author	Mortier, S.T.F.C.; Van Hoey, S.; Cierkens, K.; Gernaey, K.V.; Seuntjens, P.; De Baets, B.; De Beer, T.; Nopens, I.
	Title	A GLUE uncertainty analysis of a drying model of pharmaceutical granules			Type	A1 Journal article
	Year	2013	Publication	European journal of pharmaceutics and biopharmaceutics	Abbreviated Journal
	Volume	85	Issue	3:b	Pages	984-995
	Keywords	A1 Journal article; Pharmacology. Therapy; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	A shift from batch processing towards continuous processing is of interest in the pharmaceutical industry. However, this transition requires detailed knowledge and process understanding of all consecutive unit operations in a continuous manufacturing line to design adequate control strategies. This can be facilitated by developing mechanistic models of the multi-phase systems in the process. Since modelling efforts only started recently in this field, uncertainties about the model predictions are generally neglected. However, model predictions have an inherent uncertainty (i.e. prediction uncertainty) originating from uncertainty in input data, model parameters, model structure, boundary conditions and software. In this paper, the model prediction uncertainty is evaluated for a model describing the continuous drying of single pharmaceutical wet granules in a six-segmented fluidized bed drying unit, which is part of the full continuous from-powder-to-tablet manufacturing line (Consigma (TM), GEA Pharma Systems). A validated model describing the drying behaviour of a single pharmaceutical granule in two consecutive phases is used. First of all, the effect of the assumptions at the particle level on the prediction uncertainty is assessed. Secondly, the paper focuses on the influence of the most sensitive parameters in the model. Finally, a combined analysis (particle level plus most sensitive parameters) is performed and discussed. To propagate the uncertainty originating from the parameter uncertainty to the model output, the Generalized Likelihood Uncertainty Estimation (GLUE) method is used. This method enables a modeller to incorporate the information obtained from the experimental data in the assessment of the uncertain model predictions and to find a balance between model performance and data precision. A detailed evaluation of the obtained uncertainty analysis results is made with respect to the model structure, interactions between parameters and uncertainty boundaries. (C) 2013 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000330200800019	Publication Date	2013-03-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0939-6411	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:114876			Serial	8005
Permanent link to this record



	Author	Vos, P.E.J.; Nikolova, I.; Janssen, S.
	Title	A high-order model for accurately simulating the size distribution of ultrafine particles in a traffic tunnel			Type	A1 Journal article
	Year	2012	Publication	Atmospheric environment : an international journal	Abbreviated Journal
	Volume	59	Issue		Pages	415-425
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	We present a computational model for simulating the dispersion of traffic emitted particulate matter inside a road tunnel, with an emphasis on the number concentration of ultrafine particles (UFP). The model primarily calculates the size distribution of the particle number concentration at each location inside the tunnel. The proposed model differs from existing models in the sense that it uses a continuous representation of the size distribution based upon the high-order finite element method and that it solves the governing equations using the state-of-the-art discontinuous Galerkin method. Next to the traditional transport processes, the model also implements the most important aerosol transformation processes such as coagulation, condensation and dry deposition. It is shown that based upon parametrisations found in literature, the process of condensation in a traffic tunnel cannot properly be modelled. Therefore, we present a correction factor that allows for a better parametrisation. The adequate performance of the model is demonstrated by both a verification study and a validation study. For the verification we show that the discretisation error converges consistently while for the validation we compare the modelled results with a suitable set of data from a UFP measurement campaign in a Taiwanese traffic tunnel. The model is shown to correctly simulate the observed behaviour and by applying a statistical model evaluation we demonstrate that the proposed model meets widely accepted air quality model acceptance criteria. (C) 2012 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000309081100047	Publication Date	2012-05-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1352-2310	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:101793			Serial	8033
Permanent link to this record



	Author	Desmet, N.; Touchant, K.; Seuntjens, P.; Tang, T.; Bronders, J.
	Title	A hybrid monitoring and modelling approach to assess the contribution of sources of glyphosate and AMPA in large river catchments			Type	A1 Journal article
	Year	2016	Publication	The science of the total environment	Abbreviated Journal
	Volume	573	Issue		Pages	1580-1588
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Large river catchments with mixed land use capture pesticides from many sources, and degradable pesticides are converted during downstream transport. Unravelling the contribution of pesticide source and the effect of degradation processes is a challenge in such areas. However, insight and understanding of the sources is important for targeted managen-lent, especially when water is abstracted from the river for drinking water production. The river Meuse is such a case. A long-term monitoring data set was applied in a modelling approach for assessing the contribution of waste water treatment plants (WWTPs) and tributaries (sub-basins) to surface water contamination, and to evaluate the effect of decay on the downstream concentrations of glyphosate and AMPA at the point of drinking water abstraction. The results show that WWTPs are important contributors for glyphosate and AMPA in large river catchments with mixed land uses. In the studied area, the river Meuse in the Netherlands, the relative contribution of WWTP effluents is above 29% for glyphosate and around 12% for AMPA. Local industries are found to be potentially big contributors of AMPA. Glyphosate entering the river system is gradually converted to AMPA and other degradation-productions, which results in downstream loads that are considerably lower than the sum of all influxes. In summer when the travel time is longer due to lower discharge, the first order decay of glyphosate in the river Meuse is estimated to result in about 50% reduction of the downstream glyphosate concentrations over a river stretch of 250 km. The contribution of glyphosate decay to the observed AMPA concentrations ranges between 2% and 10%. Contributions are sensitive to seasonal variations in discharge that influence the concentrations through dilution and degradation. (C) 2016 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000390071000153	Publication Date	2016-10-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0048-9697; 1879-1026	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:140296			Serial	7391
Permanent link to this record



	Author	Nelen, D.; Manshoven, S.; Peeters, J.R.; Vanegas, P.; D'Haese, N.; Vrancken, K.
	Title	A multidimensional indicator set to assess the benefits of WEEE material recycling			Type	A1 Journal article
	Year	2014	Publication	Journal of cleaner production	Abbreviated Journal
	Volume	83	Issue		Pages	305-316
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	EU strategies for waste management have long recognized the key role of recycling to move towards sustainable consumption and production. This resulted in a range of regulatory measures, among which the Waste Electrical and Electronic Equipment (WEEE) directive, which sets weight-based targets for recovery, preparation for re-use and recycling. The increasing strategic relevance of the supply of raw materials has, however, spurred a more integrated approach towards resource efficiency. In addition to the prevention of disposal, recycling practices are now also meant to contribute to sustainable materials management by pursuing (i) a higher degree of material cycle closure, (ii) an improved recovery of strategically relevant materials, and (iii) the avoidance of environmental burdens associated with the extraction and refining of primary raw materials. In response to this evolution, this paper reports about the development of an indicator set that allows to quantitatively demonstrate these recycling benefits, hence going further than the weight-based objectives employed in the WEEE directive. The indicators can be calculated for WEEE recycling processes for which information is available on both input and output fractions. It offers a comprehensive framework that aims to support decision making processes on product design, to identify opportunities for the optimization of WEEE End-of-Life scenarios, and to assess the achieved (or expected) results of implemented (or planned) recycling optimization strategies. The paper is illustrated by a case study on the recycling of LCD televisions. (C) 2014 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000343781500030	Publication Date	2014-07-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0959-6526	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:121160			Serial	7393
Permanent link to this record



	Author	Kummamuru, N.B.; Perreault, P.; Lenaerts, S.
	Title	A new generalized empirical correlation for predicting methane hydrate equilibrium conditions in pure water			Type	A1 Journal article
	Year	2021	Publication	Industrial & Engineering Chemistry Research	Abbreviated Journal	Ind Eng Chem Res
	Volume	60	Issue	8	Pages	3474-3483
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	This work contributes to a new generalized empirical correlation for predicting methane (CH4) hydrate equilibrium conditions in pure water. Unlike the conventional thermodynamic approach that involves complex reckoning, the proposed empirical equation is developed by regressing 215 experimental data points from the literature and validating with 45 data points for predicting methane hydrate equilibrium conditions in pure water. The new correlation is proposed for a temperature and pressure range of 273.2–303.48 K and 2.63–72.26 MPa, respectively. The accuracy and performance of the proposed correlation is quantitatively evaluated using statistical error analysis. The proposed correlation was able to estimate CH4 hydrate equilibrium conditions satisfactorily with an R2 of 0.99987. The overall error analysis for the proposed correlation shows fair agreement with the experimental data reported within the literature. Concurrently, the new correlation showed better performance in predicting equilibrium conditions compared to those calculated by other empirical correlations available in the literature within the investigated range. In addition, the proposed empirical equation is also checked to evaluate its efficacy in fitting each set of experimental binary/ternary methane hydrates (BTMH) and binary hydrogen hydrates (BHH) for an accurate representation of equilibrium data over a wide range of composition, pressure, and temperature conditions. A maximum percentage deviation of 0.58% and 0.24% was observed between experimental and calculated equilibrium conditions for BTMH and BHH, respectively.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000626326200017	Publication Date	2021-02-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0888-5885; 1520-5045	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited		Open Access	Not_Open_Access
	Notes				Approved	Most recent IF: 2.843
	Call Number	UA @ admin @ c:irua:175862			Serial	7394
Permanent link to this record



	Author	Huyskens, C.; Brauns, E.; van Hoof, E.; de Wever, H.
	Title	A new method for the evaluation of the reversible and irreversible fouling propensity of MBR mixed liquor			Type	A1 Journal article
	Year	2008	Publication	Journal of membrane science	Abbreviated Journal
	Volume	323	Issue	1	Pages	185-192
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	In this paper, a new fouling measurement method is presented as a pragmatic approach to determine a mixed liquor's fouling propensity. The MBR-VFM (VITO Fouling Measurement) uses a specific measurement protocol consisting of alternating filtration and physical cleaning steps, which enables the calculation of both the reversible and the irreversible fouling resistances. The MBR-VFM principle, set-up and measurement protocol are described as well as the evaluation of the fouling measurement method. Finally, the MBR-VFM was validated by comparing the fouling propensity measured on-line by the MBR-VFM in a lab-scale MBR with the fouling of the MBR membranes themselves. Our experiments indicated that the MBR-VFM can accurately measure fouling and that it can even be detected earlier than can be seen from the on-line filtration data of the lab-scale system itself. Furthermore, the differences measured in reversible and irreversible fouling seemed to be related to the observed impact of physical and chemical cleaning respectively. Therefore, the application of the MBR-VFM as an on-line sensor in an advanced control system, enabling the deployment of the measured fouling data for the control of membrane cleaning, seems feasible and will be tested in the near future.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000258904600023	Publication Date	2008-06-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0376-7388	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:88401			Serial	8303
Permanent link to this record



	Author	Shi, P.; Wang, L.; Quinn, B.K.K.; Gielis, J.
	Title	A new program to estimate the parameters of Preston's equation, a general formula for describing the egg shape of birds			Type	A1 Journal article
	Year	2023	Publication	Symmetry	Abbreviated Journal	Symmetry-Basel
	Volume	15	Issue	1	Pages	231-10
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Preston's equation is a general model describing the egg shape of birds. The parameters of Preston's equation are usually estimated after re-expressing it as the Todd-Smart equation and scaling the egg's actual length to two. This method assumes that the straight line through the two points on an egg's profile separated by the maximum distance (i.e., the longest axis of an egg's profile) is the mid-line. It hypothesizes that the photographed egg's profile is perfectly bilaterally symmetrical, which seldom holds true because of photographic errors and placement errors. The existing parameter estimation method for Preston's equation considers an angle of deviation for the longest axis of an egg's profile from the mid-line, which decreases prediction errors to a certain degree. Nevertheless, this method cannot provide an accurate estimate of the coordinates of the egg's center, and it leads to sub-optimal parameter estimation. Thus, it is better to account for the possible asymmetry between the two sides of an egg's profile along its mid-line when fitting egg-shape data. In this paper, we propose a method based on the optimization algorithm (optimPE) to fit egg-shape data and better estimate the parameters of Preston's equation by automatically searching for the optimal mid-line of an egg's profile and testing its validity using profiles of 59 bird eggs spanning a wide range of existing egg shapes. We further compared this method with the existing one based on multiple linear regression (lmPE). This study demonstrated the ability of the optimPE method to estimate numerical values of the parameters of Preston's equation and provide the theoretical egg length (i.e., the distance between two ends of the mid-line of an egg's profile) and the egg's maximum breadth. This provides a valuable approach for comparing egg shapes among conspecifics or across different species, or even different classes (e.g., birds and reptiles), in future investigations.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000927531000001	Publication Date	2023-01-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2073-8994	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.7	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 2.7; 2023 IF: 1.457
	Call Number	UA @ admin @ c:irua:195347			Serial	7279
Permanent link to this record



	Author	Wagaarachchige, J.; Idris, Z.; Kummamuru, N.B.; Sætre, K.A.; Halstensen, M.; Jens, K.-J.
	Title	A new sulfolane based solvent for CO₂ capture			Type	P1 Proceeding
	Year	2021	Publication	SSRN electronic journal	Abbreviated Journal
	Volume		Issue		Pages
	Keywords	P1 Proceeding; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	This study presents novel sulfolane based non-aqueous CO2 capture solvents, as an alternative solution for capturing CO2 from industrial processes. In order to select the most promising amine system, five different amines were tested by monitoring CO2 absorption and desorption processes using the time-base Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy. During absorption experiments, we observed the formation of Monomethyl Carbonate (MMC) in diisopropylamine (DIPA) and 2-amino-2-methyl-1-propanol (AMP) systems, while carbamate was observed as the main product for the other three amine systems tested. In regeneration experiments, the MMC could be desorbed relatively easily from the amine solution at a mild temperature.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	2021-04-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:180364			Serial	8305
Permanent link to this record



	Author	Jammaer, J.; Aprile, C.; Verbruggen, S.W.; Lenaerts, S.; Pescarmona, P.P.; Martens, J.A.
	Title	A non-aqueous synthesis of TiO₂SiO₂ composites in supercritical CO₂ for the photodegradation of pollutants			Type	A1 Journal article
	Year	2011	Publication	Chemsuschem	Abbreviated Journal	Chemsuschem
	Volume	4	Issue	10	Pages	1457-1463
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Titania/silica composites with different Ti/Si ratios are synthesized via a nonconventional synthesis route. The synthesis involves non-aqueous reaction of metal alkoxides and formic acid at 75 °C in supercritical carbon dioxide. The as-prepared composite materials contain nanometer-sized anatase crystallites and amorphous silica. Large specific surface areas are obtained. The composites are evaluated in the photocatalytic degradation of phenol in aqueous medium, and in the elimination of acetaldehyde from air. The highest photocatalytic activity in both processes is achieved with a composite containing 40 wt % TiO2.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000296497400010	Publication Date	2011-05-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1864-5631	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.226	Times cited	15	Open Access
	Notes	; The authors acknowledge sponsorship from CECAT and Methusalem (long-term financing of the Flemish government). We thank Dr. E. Gobechiya for assistance with XRD measurements and A. Lemaire for assistance with mercury porosimetry measurements. ;			Approved	Most recent IF: 7.226; 2011 IF: 6.827
	Call Number	UA @ admin @ c:irua:93363			Serial	5973
Permanent link to this record



	Author	Gielis, J.; Natalini, P.; Ricci, P.E.
	Title	A note about generalized forms of the Gielis formula			Type	H1 Book chapter
	Year	2017	Publication		Abbreviated Journal
	Volume	2	Issue		Pages	107-116 T2 - Modeling in mathematics : proceedings
	Keywords	H1 Book chapter; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	We generalize the Gielis Superformula by extending the R. Chacon approach, but avoiding the use of Jacobi elliptic functions. The obtained results are extended to the three-dimensional case. Several new shapes are derived by using the computer algebra system Mathematica(C).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000442076400008	Publication Date	2017-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN	978-94-6239-260-1; 978-94-6239-261-8; 2543-0300; 978-94-6239-260-1	Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:144550			Serial	8318
Permanent link to this record



	Author	Gielis, J.; Tavkhelidze, I.
	Title	A note on Generalized Möbius-Listing Bodies			Type	P1 Proceeding
	Year	2023	Publication		Abbreviated Journal
	Volume		Issue		Pages	31-39 T2 - Proceedings of the 1st International Sy
	Keywords	P1 Proceeding; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Generalized Möbius-Listing surfaces and bodies generalize Möbius bands, and this research was motivated originally by solutions of boundary value problems. Analogous to cutting of the original Möbius band, for this class of surfaces and bodies, results have been obtained when cutting such bodies or surfaces. In general, cutting leads to interlinked and intertwined different surfaces or bodies, resulting in very complex systems. However, under certain conditions, the result of cutting can be a single surface or body, which reduces complexity considerably. These conditions are based on congruence and rotational symmetry of the resulting cross sections after cutting, and on the knife cutting the origin
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	2023-11-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	978-90-833839-0-3	ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:201047			Serial	9063
Permanent link to this record



	Author	Gielis, J.; Caratelli, D.; Shi, P.; Ricci, P.E.
	Title	A note on spirals and curvature			Type	A1 Journal article
	Year	2020	Publication	Growth and form	Abbreviated Journal
	Volume	1	Issue	1	Pages	1-8
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Starting from logarithmic, sinusoidal and power spirals, it is shown how these spirals are connected directly with Chebyshev polynomials, Lamé curves, with allometry and Antonelli-metrics in Finsler geometry. Curvature is a crucial concept in geometry both for closed curves and equiangular spirals, and allowed Dillen to give a general definition of spirals. Many natural shapes can be described as a combination of one of two basic shapes in nature—circle and spiral—with Gielis transformations. Using this idea, shape description itself is used to develop a novel approach to anisotropic curvature in nature. Various examples are discussed, including fusion in flowers and its connection to the recently described pseudo-Chebyshev functions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	2020-02-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:167061			Serial	6569
Permanent link to this record



	Author	Alloul, A.; Moradvandi, A.; Puyol, D.; Molina, R.; Gardella, G.; Vlaeminck, S.E.; De Schutter, B.; Abraham, E.; Lindeboom, R.E.F.; Weissbrodt, D.G.
	Title	A novel mechanistic modelling approach for microbial selection dynamics : towards improved design and control of raceway reactors for purple bacteria			Type	A1 Journal article
	Year	2023	Publication	Bioresource technology	Abbreviated Journal
	Volume	390	Issue		Pages	129844-129849
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Purple phototrophic bacteria (PPB) show an underexplored potential for resource recovery from wastewater. Raceway reactors offer a more affordable full-scale solution on wastewater and enable useful additional aerobic processes. Current mathematical models of PPB systems provide useful mechanistic insights, but do not represent the full metabolic versatility of PPB and thus require further advancement to simulate the process for technology development and control. In this study, a new modelling approach for PPB that integrates the photoheterotrophic, and both anaerobic and aerobic chemoheterotrophic metabolic pathways through an empirical parallel metabolic growth constant was proposed. It aimed the modelling of microbial selection dynamics in competition with aerobic and anaerobic microbial community under different operational scenarios. A sensitivity analysis was carried out to identify the most influential parameters within the model and calibrate them based on experimental data. Process perturbation scenarios were simulated, which showed a good performance of the model.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001094606700001	Publication Date	2023-10-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0960-8524	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	11.4	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 11.4; 2023 IF: 5.651
	Call Number	UA @ admin @ c:irua:200035			Serial	8905
Permanent link to this record



	Author	Van Hoey, S.; Seuntjens, P.; van der Kwast, J.; Nopens, I.
	Title	A qualitative model structure sensitivity analysis method to support model selection			Type	A1 Journal article
	Year	2014	Publication	Journal of hydrology	Abbreviated Journal
	Volume	519	Issue	D	Pages	3426-3435
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The selection and identification of a suitable hydrological model structure is a more challenging task than fitting parameters of a fixed model structure to reproduce a measured hydrograph. The suitable model structure is highly dependent on various criteria, i.e. the modeling objective, the characteristics and the scale of the system under investigation and the available data. Flexible environments for model building are available, but need to be assisted by proper diagnostic tools for model structure selection. This paper introduces a qualitative method for model component sensitivity analysis. Traditionally, model sensitivity is evaluated for model parameters. In this paper, the concept is translated into an evaluation of model structure sensitivity. Similarly to the one-factor-at-a-time (OAT) methods for parameter sensitivity, this method varies the model structure components one at a time and evaluates the change in sensitivity towards the output variables. As such, the effect of model component variations can be evaluated towards different objective functions or output variables. The methodology is presented for a simple lumped hydrological model environment, introducing different possible model building variations. By comparing the effect of changes in model structure for different model objectives, model selection can be better evaluated. Based on the presented component sensitivity analysis of a case study, some suggestions with regard to model selection are formulated for the system under study: (1) a non-linear storage component is recommended, since it ensures more sensitive (identifiable) parameters for this component and less parameter interaction; (2) interflow is mainly important for the low flow criteria; (3) excess infiltration process is most influencing when focussing on the lower flows; (4) a more simple routing component is advisable; and (5) baseflow parameters have in general low sensitivity values, except for the low flow criteria. (C) 2014 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000347589600057	Publication Date	2014-10-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-1694	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:123809			Serial	7395
Permanent link to this record



	Author	Winterstetter, A.; Grodent, M.; Kini, V.; Ragaert, K.; Vrancken, K.C.M.
	Title	A review of technological solutions to prevent or reduce marine plastic litter in developing countries			Type	A1 Journal article
	Year	2021	Publication	Sustainability	Abbreviated Journal	Sustainability-Basel
	Volume	13	Issue	9	Pages	4894
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Growing global plastic production combined with poor waste collection has led to increasing amounts of plastic debris being found in oceans, rivers and on shores. The goal of this study is to provide an overview on currently available technological solutions to tackle marine plastic litter and to assess their potential use in developing countries. To compile an inventory of technological solutions, a dedicated online platform was developed. A total of 51 out of initially 75 submitted solutions along the plastics value chain were assessed by independent experts. Collection systems represent more than half of the shortlisted solutions. A quarter include processing and treatment technologies, either as a stand-alone solution (30%) or, more commonly, in combination with a first litter capturing step. Ten percent offer digital solutions. The rest focuses on integrated waste management solutions. For each stage in the source-to-sea spectrum-land, rivers, sea-two illustrative examples are described in detail. This study concludes that the most cost-effective type of solution tackles land-based sources of marine litter and combines technology with people-oriented practices, runs on own energy sources, connects throughout the plastics value chain with a convincing valorization plan for captured debris, and involves all relevant stakeholders.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000650920900001	Publication Date	2021-04-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2071-1050	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.789	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 1.789
	Call Number	UA @ admin @ c:irua:178368			Serial	7396
Permanent link to this record



	Author	Borah, R.; Ag, K.R.; Minja, A.C.; Verbruggen, S.W.
	Title	A review on self‐assembly of colloidal nanoparticles into clusters, patterns, and films : emerging synthesis techniques and applications			Type	A1 Journal article
	Year	2023	Publication	Small methods	Abbreviated Journal
	Volume		Issue		Pages	1-32
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The colloidal synthesis of functional nanoparticles has gained tremendous scientific attention in the last decades. In parallel to these advancements, another rapidly growing area is the self-assembly or self-organization of these colloidal nanoparticles. First, the organization of nanoparticles into ordered structures is important for obtaining functional interfaces that extend or even amplify the intrinsic properties of the constituting nanoparticles at a larger scale. The synthesis of large-scale interfaces using complex or intricately designed nanostructures as building blocks, requires highly controllable self-assembly techniques down to the nanoscale. In certain cases, for example, when dealing with plasmonic nanoparticles, the assembly of the nanoparticles further enhances their properties by coupling phenomena. In other cases, the process of self-assembly itself is useful in the final application such as in sensing and drug delivery, amongst others. In view of the growing importance of this field, this review provides a comprehensive overview of the recent developments in the field of nanoparticle self-assembly and their applications. For clarity, the self-assembled nanostructures are classified into two broad categories: finite clusters/patterns, and infinite films. Different state-of-the-art techniques to obtain these nanostructures are discussed in detail, before discussing the applications where the self-assembly significantly enhances the performance of the process.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000940393200001	Publication Date	2023-03-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2366-9608	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.4	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 12.4; 2023 IF: NA
	Call Number	UA @ admin @ c:irua:194597			Serial	7336
Permanent link to this record



	Author	De Bock, A.; Belmans, B.; Vanlanduit, S.; Blom, J.; Alvarado Alvarado, A.A.; Audenaert, A.
	Title	A review on the leaf area index (LAI) in vertical greening systems			Type	A1 Journal article
	Year	2023	Publication	Building and environment	Abbreviated Journal
	Volume	229	Issue		Pages	109926-14
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL); Sustainable Pavements and Asphalt Research (SuPAR); Energy and Materials in Infrastructure and Buildings
	Abstract	The leaf area index (LAI) is a key dynamic parameter in Vertical Greening Systems (VGS). It quantifies the total amount of leaf area in the canopy and largely determines the extent of co-benefits of VGS. Whereas many studies on VGS discuss the importance of the LAI, only few elaborate on the parameter itself, how it is determined and what the current limitations are in VGS. Moreover, although there is scientific consensus on the importance of LAI in VGS, specific non-destructive monitoring techniques for continuous LAI monitoring appear to be absent, which results in limited overall data on the LAI of VGS under different spatial and temporal conditions and problems in quantifying the benefits of VGS in practice. To fill these gaps, this paper specifically focuses on the LAI of VGS and its monitoring techniques. An overview of existing LAI monitoring techniques in the field of VGS is presented. To arrive at dedicated techniques, this is complemented by a thorough analysis of LAI monitoring techniques used in other research fields, e.g. agriculture and forestry. It is established that two indirect techniques for LAI monitoring are currently available in the VGS sector, but a proper standardized sampling methodology currently lacks. Monitoring techniques used in other sectors offer opportunities for developing dedicated monitoring methods for VGS, but require further research due to the specific features of VGS systems. Furthermore, guidelines are proposed for a more standardized LAI determination of reporting of LAI values in VGS.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000950866100001	Publication Date	2022-12-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0360-1323	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:194575			Serial	9085
Permanent link to this record



	Author	Fougerolle, Y.D.; Truchetet, F.; Demonceaux, C.; Gielis, J.
	Title	A robust evolutionary algorithm for the recovery of rational Gielis curves			Type	A1 Journal article
	Year	2013	Publication	Pattern recognition	Abbreviated Journal
	Volume	46	Issue	8	Pages	2078-2091
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Gielis curves (GC) can represent a wide range of shapes and patterns ranging from star shapes to symmetric and asymmetric polygons, and even self intersecting curves. Such patterns appear in natural objects or phenomena, such as flowers, crystals, pollen structures, animals, or even wave propagation. Gielis curves and surfaces are an extension of Lamé curves and surfaces (superquadrics) which have benefited in the last two decades of extensive researches to retrieve their parameters from various data types, such as range images, 2D and 3D point clouds, etc. Unfortunately, the most efficient techniques for superquadrics recovery, based on deterministic methods, cannot directly be adapted to Gielis curves. Indeed, the different nature of their parameters forbids the use of a unified gradient descent approach, which requires initial pre-processings, such as the symmetry detection, and a reliable pose and scale estimation. Furthermore, even the most recent algorithms in the literature remain extremely sensitive to initialization and often fall into local minima in the presence of large missing data. We present a simple evolutionary algorithm which overcomes most of these issues and unifies all of the required operations into a single though efficient approach. The key ideas in this paper are the replacement of the potential fields used for the cost function (closed form) by the shortest Euclidean distance (SED, iterative approach), the construction of cost functions which minimize the shortest distance as well as the curve length using R-functions, and slight modifications of the evolutionary operators. We show that the proposed cost function based on SED and R-function offers the best compromise in terms of accuracy, robustness to noise, and missing data.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000317944800002	Publication Date	2013-01-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0031-3203	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:107181			Serial	8485
Permanent link to this record