NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	31–60 of 437 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 >>

List View

Citations

Details

	Records
	Author	Coppens, J.; Lindeboom, R.; Muys, M.; Coessens, W.; Alloul, A.; Meerbergen, K.; Lievens, B.; Clauwaert, P.; Boon, N.; Vlaeminck, S.E.
	Title	Nitrification and microalgae cultivation for two-stage biological nutrient valorization from source separated urine			Type	A1 Journal article
	Year	2016	Publication	Bioresource technology	Abbreviated Journal
	Volume	211	Issue		Pages	41-50
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Urine contains the majority of nutrients in urban wastewaters and is an ideal nutrient recovery target. In this study, stabilization of real undiluted urine through nitrification and subsequent microalgae cultivation were explored as strategy for biological nutrient recovery. A nitrifying inoculum screening revealed a commercial aquaculture inoculum to have the highest halotolerance. This inoculum was compared with municipal activated sludge for the start-up of two nitrification membrane bioreactors. Complete nitrification of undiluted urine was achieved in both systems at a conductivity of 75 mS cm−1 and loading rate above 450 mg N L−1 d−1. The halotolerant inoculum shortened the start-up time with 54%. Nitrite oxidizers showed faster salt adaptation and Nitrobacter spp. became the dominant nitrite oxidizers. Nitrified urine as growth medium for Arthrospira platensis demonstrated superior growth compared to untreated urine and resulted in a high protein content of 62%. This two-stage strategy is therefore a promising approach for biological nutrient recovery.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000375186700006	Publication Date	2016-03-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0960-8524	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:139913			Serial	8307
Permanent link to this record



	Author	Vanrenterghem, B.; Papaderakis, A.; Sotiropoulos, S.; Tsiplakides, D.; Balomenou, S.; Bals, S.; Breugelmans, T.
	Title	The reduction of benzylbromide at Ag-Ni deposits prepared by galvanic replacement			Type	A1 Journal article
	Year	2016	Publication	Electrochimica acta	Abbreviated Journal	Electrochim Acta
	Volume	196	Issue	196	Pages	756-768
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Applied Electrochemistry & Catalysis (ELCAT)
	Abstract	A two-step procedure was applied to prepare bimetallic Ag-Ni glassy carbon supported catalysts (Ag-Ni/GC). First Ni layers were prepared by means of electrodeposition in an aqueous deaerated nickel chloride + nickel sulfamate + boric acid solution. Second, the partial replacement of Ni layers by Ag was achieved upon immersion of the latter in solutions containing silver nitrate. Three different pretreatment protocols were used after preparation of the Ag/Ni deposits; as prepared, cathodised in alkali and scanned in acid. After the pretreatment the surface was characterised by means of spectroscopy techniques (scanning electron microscopy and energy dispersive x-ray) and electrochemically in an alkali NaOH solution through cyclic voltammetry (CV). Afterwards the modified electrodes were tested for the reduction of benzylbromide in acetonitrile solutions by using CV and were found to show improved activity compared to bulk Ag electrode. The highest activity towards benzylbromide reduction was observed for pre-cathodised Ag-Ni electrodes. A final stage of the research focuses on the development of a practical Ag/Ni foam catalyst for the reduction of benzylbromide. Due to the high electrochemical active surface area of Ag/Ni foam, a higher conversion of benzyl bromide was obtained in comparison with bulk Ag.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000372877400083	Publication Date	2016-03-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-4686	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.798	Times cited	21	Open Access	OpenAccess
	Notes	The quanta 250 FEG microscope of the Electron Microscopy for Material Science group at the University of Antwerp was funded by the Hercules foundation of the Flemish government. Sara Bals acknowledges financial support from European Research Council (ERC Starting Grant #335078-COLOURATOMS).; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot);			Approved	Most recent IF: 4.798
	Call Number	c:irua:132081			Serial	4065
Permanent link to this record



	Author	Drozhzhin, O.A.; Sumanov, V.D.; Karakulina, O.M.; Abakumov, A.M.; Hadermann, J.; Baranov, A.N.; Stevenson, K.J.; Antipov, E.V.
	Title	Switching between solid solution and two-phase regimes in the Li1-xFe1-yMnyPO4 cathode materials during lithium (de)insertion: combined PITT, in situ XRPD and electron diffraction tomography study			Type	A1 Journal article
	Year	2016	Publication	Electrochimica acta	Abbreviated Journal	Electrochim Acta
	Volume	191	Issue	191	Pages	149-157
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The electrochemical properties and phase transformations during (de)insertion of Li+ in LiFePO4, LiFe0.9Mn0.1PO4 and LiFe0.5Mn0.5PO4 are studied by means of galvanostatic cycling, potential intermittent titration technique (PITT) and in situ X-ray powder diffraction. Different modes of switching between the solid solution and two-phase regimes are revealed which are influenced by the Mn content in Li1-xFe1-yMnyPO4. Additionally, an increase in electrochemical capacity with the Mn content is observed at high rates of galvanostatic cycling (10C, 20C), which is in good agreement with the numerically estimated contribution of the solid solution mechanism determined from PITT data. The observed asymmetric behavior of the phase transformations in Li1-xFe0.5Mn0.5PO4 during charge and discharge is discussed. For the first time, the crystal structures of electrochemically deintercalated Li1-xFe0.5Mn0.5PO4 with different Li content – LiFe0.5Mn0.5PO4, Li0.5Fe0.5Mn0.5PO4 and Li0.1Fe0.5Mn0.5PO4 – are refined, including the occupancy factors of the Li position. This refinement is done using electron diffraction tomography data. The crystallographic analyses of Li1-xFe0.5Mn0.5PO4 reveal that at x = 0.5 and 0.9 the structure retains the Pnma symmetry and the main motif of the pristine x = 0 structure without noticeable short range order effects.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000371143200018	Publication Date	2016-01-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-4686	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.798	Times cited	27	Open Access
	Notes	This work was supported by the Russian Foundation of Basic Research (grants No. 14-29-04064 and 14-03-31473), Skolkovo Institute of Science and Technology, and the Lomonosov Moscow State University Program of Development. J. Hadermann, O. M. Karakulina and A. M. Abakumov acknowl- edge support from FWO under grant G040116N.			Approved	Most recent IF: 4.798
	Call Number	c:irua:131911			Serial	4032
Permanent link to this record



	Author	Verbruggen, S.W.; Keulemans, M.; Goris, B.; Blommaerts, N.; Bals, S.; Martens, J.A.; Lenaerts, S.
	Title	Plasmonic ‘rainbow’ photocatalyst with broadband solar light response for environmental applications			Type	A1 Journal article
	Year	2016	Publication	Applied catalysis : B : environmental	Abbreviated Journal	Appl Catal B-Environ
	Volume	188	Issue	188	Pages	147-153
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	We propose the concept of a ‘rainbow’ photocatalyst that consists of TiO2 modified with gold-silver alloy nanoparticles of various sizes and compositions, resulting in a broad plasmon absorption band that covers the entire UV–vis range of the solar spectrum. It is demonstrated that this plasmonic ‘rainbow’ photocatalyst is 16% more effective than TiO2 P25 under both simulated and real solar light for pollutant degradation at the solid-gas interface. With this we provide a promising strategy to maximize the spectral response for solar to chemical energy conversion.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000372677500016	Publication Date	2016-02-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-3373	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.446	Times cited	47	Open Access	OpenAccess
	Notes	S.W.V. and B.G. acknowledge the Research Foundation—Flanders (FWO) for a postdoctoral fellowship. M.K. acknowledges IWT for the doctoral scholarship. S.B. acknowledges the European Research Council (ERC) for financial support through the ERC grant agreement no. 335078-COLOURATOM. J.A.M. acknowledges the Flemish government for long-term structural funding (Methusalem).; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot);			Approved	Most recent IF: 9.446
	Call Number	c:irua:130995			Serial	4061
Permanent link to this record



	Author	Ryabova, A.S.; Napolskiy, F.S.; Poux, T.; Istomin, S.Y.; Bonnefont, A.; Antipin, D.M.; Baranchikov, A.Y.; Levin, E.E.; Abakumov, A.M.; Kéranguéven, G.; Antipov, E.V.; Tsirlina, G.A.; Savinova, E.R.;
	Title	Rationalizing the influence of the Mn(IV)/Mn(III) red-Ox transition on the electrocatalytic activity of manganese oxides in the oxygen reduction reaction			Type	A1 Journal article
	Year	2016	Publication	Electrochimica acta	Abbreviated Journal	Electrochim Acta
	Volume	187	Issue	187	Pages	161-172
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Knowledge on the mechanisms of oxygen reduction reaction (ORR) and descriptors linking the catalytic activity to the structural and electronic properties of transition metal oxides enable rational design of more efficient catalysts. In this work ORR electrocatalysis was studied on a set of single and complex Mn (III) oxides with a rotating disc electrode method and cyclic voltammetry. We discovered an exponential increase of the specific electrocatalytic activity with the potential of the surface Mn(IV)/Mn(III) red-ox couple, suggesting the latter as a new descriptor for the ORR electrocatalysis. The observed dependence is rationalized using a simple mean-field kinetic model considering availability of the Mn( III) centers and adsorbate-adsorbate interactions. We demonstrate an unprecedented activity of Mn2O3, ca. 40 times exceeding that of MnOOH and correlate the catalytic activity of Mn oxides to their crystal structure. (C) 2015 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000367235600019	Publication Date	2015-11-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-4686	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.798	Times cited	51	Open Access
	Notes				Approved	Most recent IF: 4.798
	Call Number	UA @ lucian @ c:irua:131096			Serial	4237
Permanent link to this record



	Author	Zhang, Y.-R.; Van Laer, K.; Neyts, E.C.; Bogaerts, A.
	Title	Can plasma be formed in catalyst pores? A modeling investigation			Type	A1 Journal article
	Year	2016	Publication	Applied catalysis : B : environmental	Abbreviated Journal	Appl Catal B-Environ
	Volume	185	Issue	185	Pages	56-67
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	tWe investigate microdischarge formation inside catalyst pores by a two-dimensional fluid model forvarious pore sizes in the m-range and for various applied voltages. Indeed, this is a poorly understoodphenomenon in plasma catalysis. The calculations are performed for a dielectric barrier discharge inhelium, at atmospheric pressure. The electron and ion densities, electron temperature, electric field andpotential, as well as the electron impact ionization and excitation rate and the densities of excited plasmaspecies, are examined for a better understanding of the characteristics of the plasma inside a pore. Theresults indicate that the pore size and the applied voltage are critical parameters for the formation of amicrodischarge inside a pore. At an applied voltage of 20 kV, our calculations reveal that the ionizationmainly takes place inside the pore, and the electron density shows a significant increase near and inthe pore for pore sizes larger than 200m, whereas the effect of the pore on the total ion density isevident even for 10m pores. When the pore size is fixed at 30m, the presence of the pore has nosignificant influence on the plasma properties at an applied voltage of 2 kV. Upon increasing the voltage,the ionization process is enhanced due to the strong electric field and high electron temperature, andthe ion density shows a remarkable increase near and in the pore for voltages above 10 kV. These resultsindicate that the plasma species can be formed inside pores of structured catalysts (in the m range),and they may interact with the catalyst surface, and affect the plasma catalytic process.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000369452000006	Publication Date	2015-12-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-3373	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.446	Times cited	75	Open Access
	Notes	This work was supported by the Fund for Scientific ResearchFlanders (FWO) (Grant no. G.0217.14N), the National Natural Sci-ence Foundation of China (Grant no. 11405019), and the ChinaPostdoctoral Science Foundation (Grant no. 2015T80244). Theauthors are very grateful to V. Meynen for the useful discussions oncatalysts. This work was carried out in part using the Turing HPCinfrastructure at the CalcUA core facility of the Universiteit Antwer-pen, a division of the Flemish Supercomputer Center VSC, fundedby the Hercules Foundation, the Flemish Government (departmentEWI) and the University of Antwerp.			Approved	Most recent IF: 9.446
	Call Number	c:irua:129808			Serial	3984
Permanent link to this record



	Author	Liu, J.; Hu, Z.-Y.; Peng, Y.; Huang, H.-W.; Li, Y.; Wu, M.; Ke, X.-X.; Van Tendeloo, G.; Su, B.-L.
	Title	2D ZnO mesoporous single-crystal nanosheets with exposed {0001} polar facets for the depollution of cationic dye molecules by highly selective adsorption and photocatalytic decomposition			Type	A1 Journal article
	Year	2016	Publication	Applied catalysis : B : environmental	Abbreviated Journal	Appl Catal B-Environ
	Volume	181	Issue	181	Pages	138-145
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Two dimensional (2D) ZnO nanosheets are ideal system for dimensionally confined transport phenomenon investigation owing to specific surface atomic configuration. Therefore, 2D ZnO porous nanosheets with single-crystal nature and {0001} polar facets, likely display some specific physicochemical properties. In this work, for the first time, 2D ZnO mesoporous single-crystal nanosheets (ZnO-MSN) with {0001} polar facets have been designed and prepared via an intriguing colloidal templating approach through controlling the infiltration speed for the suspension of EG-capped ZnO nanoparticles and polymer colloids. The EG-capped ZnO nanoparticles are very helpful for single-crystal nanosheet formation, while the polymer colloids play dual roles on the mesoporosity generation and {0001} polar facets formation within the mesopores. Such special 2D structure not only accelerates the hole-electron separation and the electron transportation owing to the single-crystal nature, but also enhances the selective adsorption of organic molecules owing to the porous structure and the exposed {0001} polar facets with more O-termination (000-1) surfaces: the 2D ZnO-MSN shows highly selective adsorption and significantly higher photodegradation for positively charged rhodamine B than those for negatively charged methyl orange and neutral phenol, comparing with ZnO nanoparticles (ZnO-NP) and ZnO commercial nanoparticles (ZnO-CNP) with high surface areas. This work may shed some light on better understanding the synthesis of 2D porous single-crystal nanosheet with exposed polar surfaces and photocatalytic mechanism of nanostructured semiconductors in a mixed organic molecules system.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000364256000015	Publication Date	2015-08-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-3373;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.446	Times cited	60	Open Access
	Notes	246791 Countatoms			Approved	Most recent IF: 9.446
	Call Number	c:irua:127638 c:irua:127638 c:irua:127638			Serial	10
Permanent link to this record



	Author	Vanrenterghem, B.; Geboes, B.; Bals, S.; Ustarroz, J.; Hubin, A.; Breugelmans, T.
	Title	Influence of the support material and the resulting particle distribution on the deposition of Ag nanoparticles for the electrocatalytic activity of benzyl bromide reduction			Type	A1 Journal article
	Year	2016	Publication	Applied catalysis : B : environmental	Abbreviated Journal	Appl Catal B-Environ
	Volume	181	Issue	181	Pages	542-549
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Applied Electrochemistry & Catalysis (ELCAT)
	Abstract	tSilver nanoparticles (NPs) were deposited on nickel, titanium and gold substrates using a potentiostaticdouble-pulse method. The influence of the support material on both the morphology and the electro-catalytic activity of Ag NPs for the reduction reaction of benzyl bromide was investigated and comparedwith previous research regarding silver NPs on glassy carbon. Scanning electron microscopy (SEM) dataindicated that spherical monodispersed NPs were obtained on Ni, Au and GC substrate with an averageparticle size of respectively 216 nm, 413 nm and 116 nm. On a Ti substrate dendritic NPs were obtainedwith a larger average particle density of 480 nm. The influence of the support material on the electrocat-alytic activity was tested by means of cyclic voltammetry (CV) for the reduction reaction of benzylbromide(1 mM) in acetonitrile + 0.1 M tetrabutylammonium perchlorate (Bu4NClO4). When the nucleation poten-tial (En) was applied at high cathodic overpotential, a positive shift of the reduction potential was obtained.The nucleation (tn) and growth time (tg) mostly had an influence on the current density whereas longerdeposition times lead to larger current densities. For these three parameters an optimum was present.The best electrocatalytic activity was obtained with Ag NPs deposited on Ni were a shift of the reduc-tion peak potential of 145 mV for the reaction of benzyl bromide was measured in comparance to bulksilver. The deposition on Au substrate yielded a positive shift of 114 mV. There was no indication of analtered reaction mechanism as the reaction was characterized as diffusion controlled and the transfercoefficients were in accordance with bulk silver. There was a beneficial catalitic activity measured due tothe interplay between support and NPs. This resulted in a shift of the reduction peak potential of 34 mV(Ag NPs on Au) and 65 mV (Ag NPs on Ni) compared to Ag NPs on a GC substrate.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000364256000052	Publication Date	2015-08-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-3373	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.446	Times cited	16	Open Access	OpenAccess
	Notes	The Quanta 250 FEG microscope of the Electron Microscopy forMaterial Science group at the University of Antwerp was fundedby the Hercules foundation of the Flemish Government. Sara Balsacknowledges financial support from European Research Council(ERC Starting Grant #335078-COLOURATOMS).; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot);			Approved	Most recent IF: 9.446
	Call Number	c:irua:128345			Serial	4064
Permanent link to this record



	Author	De Dobbelaere, C.; Lourdes Calzada, M.; Bretos, I.; Jimenez, R.; Ricote, J.; Hadermann, J.; Hardy, A.; Van Bael, M.K.
	Title	Gaining new insight into low-temperature aqueous photochemical solution deposited ferroelectric PbTiO3 films			Type	A1 Journal article
	Year	2016	Publication	Materials chemistry and physics	Abbreviated Journal	Mater Chem Phys
	Volume	174	Issue		Pages	28-40
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The nature of the low-temperature photochemical assisted formation process of ferroelectric lead titanate (PbTiO3) films is studied in the present work. Films are obtained by the deposition of an aqueous solution containing citric acid based (citrato) metal ion complexes with intrinsic UV activity. This UV activity is crucial for the aqueous photochemical solution deposition (aqueous PCSD) route being used. UV irradiation enhances the early decomposition of organics and results in improved electrical properties for the crystalline oxide film, even if the film is crystallized at low temperature. GATR-FTIR shows that UV irradiation promotes the decomposition of organic precursor components, resulting in homogeneous films if applied in the right temperature window during film processing. The organic content, morphology and crystallinity of the irradiated films, achieved at different processing atmospheres and temperatures, is studied and eventually correlated to the functional behavior of the obtained films. This is an important issue, as crystalline films obtained at low temperatures often lack ferroelectric responses. In this work, the film prepared in pure oxygen at the very low temperature of 400 degrees C and after an optimized UV treatment presents a significant remanent polarization value of P-r = 8.8 mu C cm(-2). This value is attributed to the better crystallinity, the larger grain size and the reduced porosity obtained thanks to the early film crystallization effectively achieved through the UV treatment in oxygen. (C) 2016 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000373865700005	Publication Date	2016-03-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0254-0584	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.084	Times cited	4	Open Access
	Notes				Approved	Most recent IF: 2.084
	Call Number	UA @ lucian @ c:irua:144729			Serial	4659
Permanent link to this record



	Author	Goris, B.; Meledina, M.; Turner, S.; Zhong, Z.; Batenburg, K.J.; Bals, S.
	Title	Three dimensional mapping of Fe dopants in ceria nanocrystals using direct spectroscopic electron tomography			Type	A1 Journal article
	Year	2016	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	171	Issue	171	Pages	55-62
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Electron tomography is a powerful technique for the 3D characterization of the morphology of nanostructures. Nevertheless, resolving the chemical composition of complex nanostructures in 3D remains challenging and the number of studies in which electron energy loss spectroscopy (EELS) is combined with tomography is limited. During the last decade, dedicated reconstruction algorithms have been developed for HAADF-STEM tomography using prior knowledge about the investigated sample. Here, we will use the prior knowledge that the experimental spectrum of each reconstructed voxel is a linear combination of a well-known set of references spectra in a so-called direct spectroscopic tomography technique. Based on a simulation experiment, it is shown that this technique provides superior results in comparison to conventional reconstruction methods for spectroscopic data, especially for spectrum images containing a relatively low signal to noise ratio. Next, this technique is used to investigate the spatial distribution of Fe dopants in Fe:Ceria nanoparticles in 3D. It is shown that the presence of the Fe2+ dopants is correlated with a reduction of the Ce atoms from Ce4+ towards Ce3+. In addition, it is demonstrated that most of the Fe dopants are located near the voids inside the nanoparticle.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000389106200007	Publication Date	2016-09-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	13	Open Access	OpenAccess
	Notes	The work was supported by the Research Foundation Flanders (FWO Vlaanderen) by project funding (G038116N, 3G004613) and by a post-doctoral research grants to B.G. S.B. acknowledges funding from the European Research Council (Starting Grant no. COLOURATOMS 335078). K.J.B. acknowledges funding from The Netherlands Organization for Scientific Research (NWO) (program 639.072.005.). We would like to thank Dr. Hilde Poelman, Dr. Vladimir Galvita and Prof. Dr. Guy B. Marin for the synthesis of the investigated sample.; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot);			Approved	Most recent IF: 2.843
	Call Number	c:irua:135185 c:irua:135185			Serial	4123
Permanent link to this record



	Author	De Backer, A.; van den Bos, K.H.W.; Van den Broek, W.; Sijbers, J.; Van Aert, S.
	Title	StatSTEM: An efficient approach for accurate and precise model-based quantification of atomic resolution electron microscopy images			Type	A1 Journal article
	Year	2016	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	171	Issue	171	Pages	104-116
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	An efficient model-based estimation algorithm is introduced to quantify the atomic column positions and intensities from atomic resolution (scanning) transmission electron microscopy ((S)TEM) images. This algorithm uses the least squares estimator on image segments containing individual columns fully accounting for overlap between neighbouring columns, enabling the analysis of a large field of view. For this algorithm, the accuracy and precision with which measurements for the atomic column positions and scattering cross-sections from annular dark field (ADF) STEM images can be estimated, has been investigated. The highest attainable precision is reached even for low dose images. Furthermore, the advantages of the model-based approach taking into account overlap between neighbouring columns are highlighted. This is done for the estimation of the distance between two neighbouring columns as a function of their distance and for the estimation of the scattering cross-section which is compared to the integrated intensity from a Voronoi cell. To provide end-users this well-established quantification method, a user friendly program, StatSTEM, is developed which is freely available under a GNU public license.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000389106200014	Publication Date	2016-09-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	43	Open Access
	Notes	The authors acknowledge financial support from the Research Foundation Flanders (FWO, Belgium) through project fundings (G.0393.11, G.0064.10 and G.0374.13), a Ph.D. research grant to K.H.W. van den Bos, and a postdoctoral research grant to A. De Backer. The research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483 – ESTEEM2 (Integrated Infrastructure Initiative-I3). A. Rosenauer is acknowledged for providing the STEMsim program.; esteem2_jra2			Approved	Most recent IF: 2.843
	Call Number	EMAT @ emat @ c:irua:135516			Serial	4280
Permanent link to this record



	Author	Gonnissen, J.; De Backer, A.; den Dekker, A.J.; Sijbers, J.; Van Aert, S.
	Title	Detecting and locating light atoms from high-resolution STEM images: The quest for a single optimal design			Type	A1 Journal article
	Year	2016	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	170	Issue	170	Pages	128-138
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	In the present paper, the optimal detector design is investigated for both detecting and locating light atoms from high resolution scanning transmission electron microscopy (HR STEM) images. The principles of detection theory are used to quantify the probability of error for the detection of light atoms from HR STEM images. To determine the optimal experiment design for locating light atoms, use is made of the so-called Cramer-Rao Lower Bound (CRLB). It is investigated if a single optimal design can be found for both the detection and location problem of light atoms. Furthermore, the incoming electron dose is optimised for both research goals and it is shown that picometre range precision is feasible for the estimation of the atom positions when using an appropriate incoming electron dose under the optimal detector settings to detect light atoms.
	Address	Electron Microscopy for Materials Science (EMAT), University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp, Belgium. Electronic address: sandra.vanaert@uantwerpen.be
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language	English	Wos	000386925500014	Publication Date	2016-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	6	Open Access
	Notes	The authors acknowledge financial support from the Research Foundation Flanders (FWO, Belgium) through project fundings (G.0368.15, G.0369.15 and G.0374.13) and a postdoctoral research grant to A. De Backer. The research leading to these results has also received funding from the European Union Seventh Framework Programme [FP7/2007-2013] under Grant agreement no. 312483 (ESTEEM2). The authors would also like to thank A. Rosenauer for providing access to the STEMsim software and Gerardo T. Martinez for fruitful discussions.; esteem2_jra2			Approved	Most recent IF: 2.843
	Call Number	c:irua:135337 c:irua:135337			Serial	4128
Permanent link to this record



	Author	Lobato, I.; Van Aert, S.; Verbeeck, J.
	Title	Progress and new advances in simulating electron microscopy datasets using MULTEM			Type	A1 Journal article
	Year	2016	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	168	Issue	168	Pages	17-27
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A new version of the open source program MULTEM is presented here. It includes a graphical user interface, tapering truncation of the atomic potential, CPU multithreading functionality, single/double precision calculations, scanning transmission electron microscopy (STEM) simulations using experimental detector sensitivities, imaging STEM (ISTEM) simulations, energy filtered transmission electron microscopy (EFTEM) simulations, STEM electron energy loss spectroscopy (EELS) simulations along with other improvements in the algorithms. We also present a mixed channeling approach for the calculation of inelastic excitations, which allows one to considerably speed up time consuming EFTEM/STEM-EELS calculations.
	Address	EMAT, University of Antwerp, Department of Physics, Groenenborgerlaan 171, B-2020 Antwerp, Belgium
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language	English	Wos	000380754100003	Publication Date	2016-06-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	43	Open Access
	Notes	The authors acknowledge financial support from the European Union under the Seventh Framework Program under a contract for an Integrated Infrastructure Initiative. Reference No. 312483- ESTEEM2. The authors acknowledge financial support from the Research Foundation Flanders (FWO, Belgium) through project fundings (G.0374.13N, G.0369.15N and G.0368.15N).; esteem2jra3; esteem2na3; esteem2_jra2			Approved	Most recent IF: 2.843
	Call Number	c:irua:134088 c:irua:134088UA @ admin @ c:irua:134088			Serial	4093
Permanent link to this record



	Author	Kirilenko, D.A.; Brunkov, P.N.
	Title	Measuring the height-to-height correlation function of corrugation in suspended graphene			Type	A1 Journal article
	Year	2016	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	165	Issue	165	Pages	1-7
	Keywords	A1 Journal article; Electron Microscopy for Materials Science (EMAT);
	Abstract	Nanocorrugation of 2D crystals is an important phenomenon since it affects their electronic and mechanical properties. The corrugation may have various sources; one of them is flexural phonons that, in particular, are responsible for the thermal conductivity of graphene. A study of corrugation of just the suspended graphene can reveal much of valuable information on the physics of this complicated phenomenon. At the same time, the suspended crystal nanorelief can hardly be measured directly because of high flexibility of the 2D crystal. Moreover, the relief portion related to rapid out-of-plane oscillations (flexural phonons) is also inaccessible by such measurements. Here we present a technique for measuring the Fourier components of the height-height correlation function H(q) of suspended graphene which includes the effect of flexural phonons. The technique is based on the analysis of electron diffraction patterns. The H(q) is measured in the range of wavevectors q approximately 0.4-4.5nm(-1). At the upper limit of this range H(q) does follow the T/kappaq(4) law. So, we measured the value of suspended graphene bending rigidity kappa=1.2+/-0.4eV at ambient temperature T approximately 300K. At intermediate wave vectors, H(q) follows a slightly weaker exponent than theoretically predicted q(-3.15) but is closer to the results of the molecular dynamics simulation. At low wave vectors, the dependence becomes even weaker, which may be a sign of influence of charge carriers on the dynamics of undulations longer than 10nm. The technique presented can be used for studying physics of flexural phonons in other 2D materials.
	Address	Ioffe Institute, Politekhnicheskaya ul. 26, 194021 St-Petersburg, Russia; ITMO University, Kronverksky pr. 49, 197101 St. Petersburg, Russia
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language	English	Wos	000375946200001	Publication Date	2016-03-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991	ISBN		Additional Links
	Impact Factor	2.843	Times cited	3	Open Access
	Notes	D.K. thanks the RFBR (Grant no. 16-32-60165) for the partial support of this research. The work was carried out in part at the Joint Research Center “Material Science and Characterization in Advanced Technologies” (St-Petersburg, Russia) under the financial support from the Ministry of Education and Science of the Russian Federation (Agreement 14.621.21.0007, 04.12.2014, id RFMEFI62114X0007, the use of the Jeol JEM-2100F microscope) and at EMAT, Universiteit Antwerpen (Antwerpen, Belgium), (the use of the FEI Tecnai G2 microscope).			Approved	Most recent IF: 2.843
	Call Number	EMAT @ emat @			Serial	4124
Permanent link to this record



	Author	Zanaga, D.; Altantzis, T.; Sanctorum, J.; Freitag, B.; Bals, S.
	Title	An alternative approach for ζ-factor measurement using pure element nanoparticles			Type	A1 Journal article
	Year	2016	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	164	Issue	164	Pages	11-16
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	It is very challenging to measure the chemical composition of hetero nanostructures in a reliable and quantitative manner. Here, we propose a novel and straightforward approach that can be used to quantify energy dispersive X-ray spectra acquired in a transmission electron microscope. Our method is based on a combination of electron tomography and the so-called ζ-factor technique. We will demonstrate the reliability of our approach as well as its applicability by investigating Au-Ag and Au-Pt hetero nanostructures. Given its simplicity, we expect that the method could become a new standard in the field of chemical characterization using electron microscopy.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000373526200002	Publication Date	2016-03-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	19	Open Access	OpenAccess
	Notes	The authors acknowledge financial support from the European Research Council (ERC Starting Grant # 335078-COLOURATOMS) and the European Union under the FP7 (Integrated Infrastructure Initiative N. 312483 – ESTEEM2). The authors would also like to thank Luis M. Liz-Marzán, Ana Sánchez-Iglesias, Stefanos Mourdikoudis and Cristina Fernández-López for sample provision and useful discussions.; esteem2jra4; ECASSara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot);			Approved	Most recent IF: 2.843
	Call Number	EMAT @ emat @			Serial	4019
Permanent link to this record



	Author	Zanaga, D.; Altantzis, T.; Sanctorum, J.; Freitag, B.; Bals, S.
	Title	An alternative approach for \zeta-factor measurement using pure element nanoparticles			Type	A1 Journal article
	Year	2016	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	164	Issue		Pages	11-16
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	It is very challenging to measure the chemical composition of hetero nanostructures in a reliable and quantitative manner. Here, we propose a novel and straightforward approach that can be used to quantify energy dispersive X-ray spectra acquired in a transmission electron microscope. Our method is based on a combination of electron tomography and the so-called zeta-factor technique. We will demonstrate the reliability of our approach as well as its applicability by investigating Au-Ag and Au-Pt hetero nanostructures. Given its simplicity, we expect that the method could become a new standard in the field of chemical characterization using electron microscopy. (C) 2016 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000373526200002	Publication Date	2016-03-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	19	Open Access	OpenAccess
	Notes	; The authors acknowledge financial support from the European Research Council (ERC Starting Grant # 335078-COLOURATOMS) and the European Union under the FP7 (Integrated Infrastructure Initiative N. 312483 – ESTEEM2). ; ecas_Sara			Approved	Most recent IF: 2.843
	Call Number	UA @ lucian @ c:irua:133259			Serial	4439
Permanent link to this record



	Author	Thirumalraj, alamurugan; Palanisamy, S.; Chen, S.-M.; De Wael, K.
	Title	A graphene/gelatin composite material for the entrapment of hemoglobin for bioelectrochemical sensing applications			Type	A1 Journal article
	Year	2016	Publication	Journal of the electrochemical society	Abbreviated Journal	J Electrochem Soc
	Volume	163	Issue	7	Pages	265-271
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	In the present work, a novel graphene (GN) and gelatin (GTN) composite was prepared and used as an immobilization matrix for hemoglobin (Hb). Compared with Hb immobilized on a bare, GN or GTN modified glassy carbon electrode (GCE), a stable and pair of well-defined quasi redox couple was observed at an Hb modified GN/GTN composite GCE at a formal potential of −0.306 V versus Ag\|AgCl. The direct electrochemical behavior of Hb was greatly enhanced by the presence of both GTN and GN. A heterogeneous electron transfer rate constant (Ks) was calculated as 3.82 s−1 for Hb immobilized at GN/GTN modified GCE, which indicates the fast direct electron transfer of Hb toward the electrode surface. The biosensor shows a stable and wide linear response for H2O2 in the linear response range from 0.1 μM to 786.6 μM with an analytical sensitivity and limit of detection of 0.48 μAμM−1 cm−2 and 0.04 μM, respectively. The fabricated biosensor holds its high selectivity in the presence of potentially active interfering species and metal ions. The biosensor shows its satisfactory practical ability in the commercial contact lens solution and human serum samples.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000377412900047	Publication Date	2016-04-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-4651	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.259	Times cited	9	Open Access
	Notes	; This project was supported by the Ministry of Science and Technology (project no. NSC1012113M027001MY3), Taiwan (Republic of China). The authors express their sincere thanks to Prof. Bih-Show Lou, Chemistry Division, Center for General Education, Chang Gung University, Tao-Yuan, Taiwan for providing the human serum samples. ;			Approved	Most recent IF: 3.259
	Call Number	UA @ admin @ c:irua:132627			Serial	5635
Permanent link to this record



	Author	Semkina, A.S.; Abakumov, M.A.; Abakumov, A.M.; Nukolova, N.V.; Chekhonin, V.P.
	Title	Relationship between the Size of Magnetic Nanoparticles and Efficiency of MRT Imaging of Cerebral Glioma in Rats			Type	A1 Journal article
	Year	2016	Publication	Bulletin of experimental biology and medicine	Abbreviated Journal	B Exp Biol Med+
	Volume	161	Issue	2	Pages	292-295
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	BSA-coated Fe3O4 nanoparticles with different hydrodynamic diameters (36 +/- 4 and 85 +/- 10 nm) were synthesized, zeta potential and T2 relaxivity were determined, and their morphology was studied by transmission electron microscopy. Studies on rats with experimental glioma C6 showed that smaller nanoparticles more effectively accumulated in the tumor and circulated longer in brain vessels. Optimization of the hydrodynamic diameter improves the efficiency of MRT contrast agent.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000380118500022	Publication Date	2016-07-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0007-4888	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	0.456	Times cited	5	Open Access
	Notes				Approved	Most recent IF: 0.456
	Call Number	UA @ lucian @ c:irua:144707			Serial	4684
Permanent link to this record



	Author	Lizin, S.; Van Passel, S.; Vranken, L.
	Title	Heterogeneity in the solar-powered consumer electronics market : a discrete choice experiments study			Type	A1 Journal article
	Year	2016	Publication	Solar Energy Materials And Solar Cells	Abbreviated Journal	Sol Energ Mat Sol C
	Volume	156	Issue		Pages	140-146
	Keywords	A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM)
	Abstract	Solar-powered consumer electronics are a likely starting point for organic photovoltaic (OPV) market development. Therefore, a generic discrete choice experiments study can determine how Flemish consumers value solar-cell characteristics for solar-poweied consumer electronics. Such characteristics include efficiency, lifetime, aesthetics, integratability, and price. We contribute to the literature by investigating preference heterogeneity in a solar-power niche market with an experimental design with a fixed reference alternative. The error components random parameter logit (ECRPL) with interactions provides a better fit than the latent class (LC) model for our choice data. The main effects had the expected signs. Consequently, aesthetics and integratability are OPV's assets. Nevertheless, heterogeneity puts the results that are valid for the average consumer into perspective. Based on our findings, OPV commercialization efforts should target the experienced, impatient user who highly values design and functionality. (C) 2016 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000383304100015	Publication Date	2016-06-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0927-0248	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.784	Times cited	2	Open Access
	Notes	; Sebastien Lizin thanks the Research Foundation Flanders (FWO) for funding his postdoctoral mandate with Grant number 12G5415N, without which it would have been impossible to revise this work. ;			Approved	Most recent IF: 4.784
	Call Number	UA @ admin @ c:irua:137107			Serial	6207
Permanent link to this record



	Author	Berdiyorov, G.R.; Madjet, M.E.; El-Mellouhi, F.; Peeters, F.M.
	Title	Effect of crystal structure on the electronic transport properties of the organometallic perovskite CH₃NH₃PbI₃			Type	A1 Journal article
	Year	2016	Publication	Solar energy materials and solar cells T2 – 2nd International Renewable and Sustainable Energy Conference (IRSEC), OCT 17-19, 2014, Ouarzazate, MOROCCO	Abbreviated Journal	Sol Energ Mat Sol C
	Volume	148	Issue	148	Pages	60-66
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT)
	Abstract	Using density-functional theory in combination with the nonequilibrium Green's function formalism, we study the effect of the crystal lattice structure of organometallic perovskite CH3NH3PbI3 on its electronic transport properties. Both dispersive interactions and spin-orbit coupling are taken into account in describing structural and electronic properties of the system. We consider two different phases of the material, namely the orthorhombic and cubic lattice structures, which are energetically stable at low (< 160 K) and high (> 330 K) temperatures, respectively. The sizable geometrical differences between the two structures in term of lattice parameters, PbI6 octahedral tilts, rotation and deformations, have considerable impact on the transport properties of the material. For example, at zero bias and for all considered electron energies, the cubic phase has a larger transmission than the orthorhombic one, although both show similar electronic densities of states. Depending on the applied voltage, the current in the cubic system can be several orders of magnitude larger as compared to the one obtained for the orthorhombic sample. We attribute this enhancement in the transmission to the presence of extended states in the cubic phase due to the symmetrically shaped and ordered PbI6 octaherdra. (C) 2015 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher	Elsevier science bv	Place of Publication	Amsterdam	Editor
	Language		Wos	000371944500011	Publication Date	2015-11-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0927-0248	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.784	Times cited	16	Open Access
	Notes	; ;			Approved	Most recent IF: 4.784
	Call Number	UA @ lucian @ c:irua:133151			Serial	4163
Permanent link to this record



	Author	Berdiyorov, G.R.; El-Mellouhi, F.; Madjet, M.E.; Alharbi, F.H.; Peeters, F.M.; Kais, S.
	Title	Effect of halide-mixing on the electronic transport properties of organometallic perovskites			Type	A1 Journal article
	Year	2016	Publication	Solar energy materials and solar cells T2 – 2nd International Renewable and Sustainable Energy Conference (IRSEC), OCT 17-19, 2014, Ouarzazate, MOROCCO	Abbreviated Journal	Sol Energ Mat Sol C
	Volume	148	Issue	148	Pages	2-10
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT)
	Abstract	Using density-functional theory in combination with the nonequilibrium Green's function formalism, we study the effect of iodide/chloride and iodide/bromide mixing on the electronic transport in lead based organometallic perovskite CH3NH3PbI3, which is known to be an effective tool to tune the electronic and optical properties of such materials. We found that depending on the level and position of the halide mixing, the electronic transport can be increased by more than a factor of 4 for a given voltage biasing. The largest current is observed for small concentration of bromide substitutions located at the equatorial sites. However, full halide substitution has a negative effect on the transport properties of this material: the current drops by an order of magnitude for both CH3NH3PbCl3 and CH3NH3PbBr3 samples. (C) 2015 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher	Elsevier science bv	Place of Publication	Amsterdam	Editor
	Language		Wos	000371944500002	Publication Date	2015-12-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0927-0248	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.784	Times cited	23	Open Access
	Notes	; ;			Approved	Most recent IF: 4.784
	Call Number	UA @ lucian @ c:irua:133150			Serial	4165
Permanent link to this record



	Author	Smets, W.; Wuyts, K.; Oerlemans, E.; Wuyts, S.; Denys, S.; Samson, R.; Lebeer, S.
	Title	Impact of urban land use on the bacterial phyllosphere of ivy (Hedera sp.)			Type	A1 Journal article
	Year	2016	Publication	Atmospheric environment : an international journal	Abbreviated Journal
	Volume	147	Issue		Pages	376-383
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The surface of the aerial parts of the plant, also termed the phyllosphere, is a selective habitat for microbes. The bacterial composition of the phyllosphere depends on host plant species, leaf characteristics, season, climate, and geographic location of the host plant. In this study, we investigated the effect of an urban environment on the bacterial composition of phyllosphere communities. We performed a passive biomonitoring experiment in which leaves were sampled from ivy (Hedera sp.), a common evergreen climber species, in urban and non-urban locations. Exposure to traffic-generated particulate matter was estimated using leaf biomagnetic analyses. The bacterial community composition was determined using 16S rRNA gene sequencing on the Illumina MiSeq. The phyllosphere microbial communities of ivy differed greatly between urban and non-urban locations, as we observed a shift in several of the dominant taxa: Beijerinckia and Methylocystaceae were most abundant in the non-urban phyllosphere, whereas Hymenobacter and Sphingomonadaceae were dominating the urban ivy phyllosphere. The richness, diversity and composition of the communities showed greater variability in the urban than in the non-urban locations, where traffic-generated PM was lower. Interestingly, the relative abundances of eight of the ten most dominant taxa correlated well with leaf magnetism, be it positive or negative. The results of this study indicate that an urban environment can greatly affect the local phyllosphere community composition. Although other urban-related factors cannot be ruled out, the relative abundance of most of the dominant taxa was significantly correlated with exposure to traffic-generated PM.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000388543600033	Publication Date	2016-10-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1352-2310	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:136110			Serial	8066
Permanent link to this record



	Author	Rahemi, V.; Trashin, S.; Meynen, V.; De Wael, K.
	Title	An adhesive conducting electrode material based on commercial mesoporous titanium dioxide as a support for Horseradish peroxidase for bioelectrochemical applications			Type	A1 Journal article
	Year	2016	Publication	Talanta : the international journal of pure and applied analytical chemistry	Abbreviated Journal	Talanta
	Volume	146	Issue		Pages	689-693
	Keywords	A1 Journal article; Laboratory of adsorption and catalysis (LADCA); AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	An adhesive conducting electrode material containing of graphite, biocompatible ion exchange polymer nafion® and commercial mesoporous TiO2 impregnated with horseradish peroxidase (HRP) is prepared and characterized by amperometric, UVvis and N2 sorption methods. The factors influencing the performance of the resulting biosensor are studied in detail. The optimal electrode material consists of 45% graphite, 50% impregnated HRPTiO2 and 5% nafion®. The optimum conditions for H2O2 reduction are an applied potential of 0.3 V and 0.1 mM hydroquinone. Sensitivity and limit of detection in the optimum conditions are 1 A M−1 cm−2 and 1 µM correspondingly. The N2 sorption results show that the pore volume of TiO2 decreases sharply upon adsorption of HRP. The preparation process of the proposed enzyme electrode is straightforward and potentially can be used for preparation of carbon paste electrodes for bioelectrochemical detections.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000363815600093	Publication Date	2015-06-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0039-9140; 1873-3573	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.162	Times cited	7	Open Access
	Notes	; The authors thank the Fund for Scientific Research – Flanders (FWO) (Grant G.0687.13), the GOA-BOF UA 2013-2016 (project-ID 28312) for funding and Ward Huybrechts of the University of Antwerp, Laboratory of Adsorption and Catalysis (LADCA) for help with the N<INF>2</INF> sorption. ;			Approved	Most recent IF: 4.162
	Call Number	UA @ admin @ c:irua:126495			Serial	5458
Permanent link to this record



	Author	Nikolaev, A.V.; Lamoen, D.; Partoens, B.
	Title	Extension of the basis set of linearized augmented plane wave (LAPW) method by using supplemented tight binding basis functions			Type	A1 Journal article
	Year	2016	Publication	The journal of chemical physics	Abbreviated Journal	J Chem Phys
	Volume	145	Issue	145	Pages	014101
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
	Abstract	In order to increase the accuracy of the linearized augmented plane wave (LAPW) method, we present a new approach where the plane wave basis function is augmented by two different atomic radial components constructed at two different linearization energies corresponding to two different electron bands (or energy windows). We demonstrate that this case can be reduced to the standard treatment within the LAPW paradigm where the usual basis set is enriched by the basis functions of the tight binding type, which go to zero with zero derivative at the sphere boundary. We show that the task is closely related with the problem of extended core states which is currently solved by applying the LAPW method with local orbitals (LAPW+LO). In comparison with LAPW+LO, the number of supplemented basis functions in our approach is doubled, which opens up a new channel for the extension of the LAPW and LAPW+LO basis sets. The appearance of new supplemented basis functions absent in the LAPW+LO treatment is closely related with the existence of the ul-component in the canonical LAPW method. We discuss properties of additional tight binding basis functions and apply the extended basis set for computation of electron energy bands of lanthanum (face and body centered structures) and hexagonal close packed lattice of cadmium. We demonstrate that the new treatment gives lower total energies in comparison with both canonical LAPW and LAPW+LO, with the energy difference more pronounced for intermediate and poor LAPW basis sets.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000379584700003	Publication Date	2016-07-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-9606	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.965	Times cited	11	Open Access
	Notes	A.V.N. acknowledges useful discussions with B. Verberck, E. V. Tkalya, and A. V. Bibikov.			Approved	Most recent IF: 2.965
	Call Number	c:irua:134290			Serial	4099
Permanent link to this record



	Author	Moretti, M.; De Boni, A.; Roma, R.; Fracchiolla, M.; Van Passel, S.
	Title	Integrated assessment of agro-ecological systems : the case study of the “Alta Murgia” National park in Italy			Type	A1 Journal article
	Year	2016	Publication	Agricultural Systems	Abbreviated Journal	Agr Syst
	Volume	144	Issue		Pages	144-155
	Keywords	A1 Journal article; Engineering Management (ENM)
	Abstract	Several indicators and methods are already applied for sustainability assessment in agriculture. The links between sustainability indicators, agricultural management and policies are not well explained. The aim of this study is to combine biophysical and monetary sustainability assessment tools to support agriculture policy decision-making. Three methodological steps are considered: i) the environmental impacts of farms are assessed using terrestrial acidification, freshwater eutrophication, soil and freshwater ecotoxicity as well as natural land transformation; ii) the most relevant indicators of agriculture damages on ecosystems quality are aggregated into an index; iii) the farms' index scores are integrated with farm assets, land and labor, into the Sustainable Value approach (SVA), as indicator of natural resources used by farms. As a case study, the methodology was applied to arable farms with and without animal husbandry of the “Alta Murgia” National Park. The crop farms, in our sample, have a higher sustainable value using their economic and environmental resources. Mixed farms need to improve their resources use efficiency. Although crop farms have lower land-use efficiency compared to mixed farms, our results suggest supporting, by means of policy options, the specialized crop farms that, on average, perform better in terms of ecosystems quality preservation. Finally, we find that Life Cycle Assessment (LCA) to soundly measure the environmental impacts clearly enriches the SVA. (C) 2016 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000373553100014	Publication Date	2016-02-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0308-521x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles; WoS full record; WoS citing articles
	Impact Factor	2.571	Times cited	6	Open Access
	Notes	; We would like to thank the editor and the anonymous referees for their helpful suggestions and insightful comments that have significantly improved the paper. The authors want to thank the “Alta Murgia” Park Authority for the support in this study and all farmers that collaborated with the authors providing data. Moreover, the authors want to thank Dr. Sylvestre Njakou Djomo for the useful discussion and suggestion to build the LCA model. ;			Approved	Most recent IF: 2.571
	Call Number	UA @ admin @ c:irua:133254			Serial	6218
Permanent link to this record



	Author	Sánchez-Iglesias, A.; Winckelmans, N.; Altantzis, T.; Bals, S.; Grzelczak, M.; Liz-Marzán, L.M.
	Title	High-Yield Seeded Growth of Monodisperse Pentatwinned Gold Nanoparticles through Thermally Induced Seed Twinning			Type	A1 Journal article
	Year	2016	Publication	Journal of the American Chemical Society	Abbreviated Journal	J Am Chem Soc
	Volume	139	Issue	139	Pages	107-110
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We show here that thermal treatment of small seeds results in extensive twinning and a subsequent drastic yield improvement (>85%) in the formation of pentatwinned nanoparticles, with pre-selected morphology (nanorods, bipyramids and decahedra) and aspect ratio. The “quality” of the seeds thus defines the yield of the obtained nanoparticles, which in the case of nanorods avoids the need for additives such as Ag+ ions. This modified seeded growth method also improves reproducibility, as the seeds can be stored for extended periods of time without compromising the quality of the final nanoparticles. Additionally, minor modification of the seeds with Pd allows their localization within the final particles, which opens new avenues toward mechanistic studies. All together, these results represent a paradigm shift in anisotropic gold nanoparticle synthesis.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000392036900025	Publication Date	2016-12-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0002-7863	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.858	Times cited	267	Open Access	OpenAccess
	Notes	Financial support is acknowledged from the European Research Council through ERC Advanced Grant Plasmaquo and the ERC Starting Grant COLOURATOM. T.A. acknowledges financial support from the Research Foundation Flanders (FWO, Belgium) through a postdoctoral grant. (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); ECAS_Sara			Approved	Most recent IF: 13.858
	Call Number	EMAT @ emat @ c:irua:139018UA @ admin @ c:irua:139018			Serial	4339
Permanent link to this record



	Author	Smets, W.; Moretti, S.; Denys, S.; Lebeer, S.
	Title	Airborne bacteria in the atmosphere : presence, purpose, and potential			Type	A1 Journal article
	Year	2016	Publication	Atmospheric environment : an international journal	Abbreviated Journal
	Volume	139	Issue		Pages	214-221
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Numerous recent studies have highlighted that the types of bacteria present in the atmosphere often show predictable patterns across space and time. These patterns can be driven by differences in bacterial sources of the atmosphere and a wide range of environmental factors, including UV intensity, precipitation events, and humidity. The abundance of certain bacterial taxa is of interest, not only for their ability to mediate a range of chemical and physical processes in the atmosphere, such as cloud formation and ice nucleation, but also for their implications -both beneficial and detrimental-for human health. Consequently, the widespread importance of airborne bacteria has stimulated the search for their applicability. Improving air quality, modelling the dispersal of airborne bacteria (e.g. pathogens) and biotechnological purposes are already being explored. Nevertheless, many technological challenges still need to be overcome to fully understand the roles of airborne bacteria in our health and global ecosystems.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000379093900021	Publication Date	2016-05-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1352-2310	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:133711			Serial	7432
Permanent link to this record



	Author	Yang, Z.; Altantzis, T.; Zanaga, D.; Bals, S.; Van Tendeloo, G.; Pileni, M.-P.
	Title	Supracrystalline Colloidal Eggs: Epitaxial Growth and Freestanding Three-Dimensional Supracrystals in Nanoscaled Colloidosomes			Type	A1 Journal article
	Year	2016	Publication	Journal of the American Chemical Society	Abbreviated Journal	J Am Chem Soc
	Volume	138	Issue	138	Pages	3493-3500
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The concept of template-confined chemical reactions allows the synthesis of complex molecules that would hardly be producible through conventional method. This idea was developed to produce high quality nanocrystals more than 20 years ago. However, template-mediated assembly of colloidal nanocrystals is still at an elementary level, not only because of the limited templates suitable for colloidal assemblies, but also because of the poor control over the assembly of nanocrystals within a confined space. Here, we report the design of a new system called “supracrystalline colloidal eggs” formed by controlled assembly of nanocrystals into complex colloidal supracrystals through superlattice-matched epitaxial overgrowth along the existing colloidosomes. Then, with this concept, we extend the supracrystalline growth to lattice-mismatched binary nanocrystal superlattices, in order to reach anisotropic superlattice growths, yielding freestanding binary nanocrystal supracrystals that could not be produced previously.
	Address	CEA/IRAMIS , CEA Saclay F-91191 Gif-sur-Yvette, France
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language	English	Wos	000372477700034	Publication Date	2016-02-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0002-7863	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.858	Times cited	57	Open Access	OpenAccess
	Notes	The research leading to these results has been supported by an Advanced Grant of the European Research Council under Grant 267129. The authors appreciate financial support by the European Union under the Framework 7 program under a contract for an Integrated Infrastructure Initiative (Reference No. 312483 ESTEEM2). The authors thank Dr. P. A. Albouy for the SAXS measurement.; esteem2_ta			Approved	Most recent IF: 13.858
	Call Number	c:irua:131923 c:irua:131923			Serial	4018
Permanent link to this record



	Author	Mikita, R.; Aharen, T.; Yamamoto, T.; Takeiri, F.; Ya, T.; Yoshimune, W.; Fujita, K.; Yoshida, S.; Tanaka, K.; Batuk, D.; Abakumov, A.M.; Brown, C.M.; Kobayashi, Y.; Kageyama, H.;
	Title	Topochemical nitridation with anion vacancy -assisted N^3-/O^2- exchange			Type	A1 Journal article
	Year	2016	Publication	Journal of the American Chemical Society	Abbreviated Journal	J Am Chem Soc
	Volume	138	Issue	138	Pages	3211-3217
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We present how the introduction of anion vacancies in oxyhydrides enables a route to access new oxynitrides, by conducting ammonolysis of perovskite oxyhydride EuTiO3-xHx (x similar to 0.18). At 400 degrees C, similar to our studies on BaTiO3-xHx, hydride lability enables a low temperature direct ammonolysis of EUTi3.82+O-2.82/H-0.18, leading to the N3-/H--exchanged product EuTi4+O2.82No0.12 square 0.06 center dot When the ammonolysis temperature was increased up to 800 degrees C, we observed a further nitridation involving N3-/O2- exchange, yielding a fully oxidized Eu3+Ti4+O2N with the GdFeO3-type distortion (Pnma) as a metastable phase, instead of pyrochlore structure. Interestingly, the same reactions using the oxide EuTiO3 proceeded through a 1:1 exchange of N3- with O-2 only above 600 degrees C and resulted in incomplete nitridation to EuTi02.25N0.75, indicating that anion vacancies created during the initial nitridation process of EuTiO2.82H0.18 play a crucial role in promoting anion (N3-/O2-) exchange at high temperatures. Hence, by using (hydride-induced) anion-deficient precursors, we should be able to expand the accessible anion composition of perovskite oxynitrides.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000371945800055	Publication Date	2016-02-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0002-7863	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.858	Times cited	28	Open Access
	Notes				Approved	Most recent IF: 13.858
	Call Number	UA @ lucian @ c:irua:133156			Serial	4266
Permanent link to this record



	Author	Bladt, E.; van Dijk-Moes, R.J.A.; Peters, J.; Montanarella, F.; de Mello Donega, C.; Vanmaekelbergh, D.; Bals, S.
	Title	Atomic Structure of Wurtzite CdSe (Core)/CdS (Giant Shell) Nanobullets Related to Epitaxy and Growth			Type	A1 Journal article
	Year	2016	Publication	Journal of the American Chemical Society	Abbreviated Journal	J Am Chem Soc
	Volume	138	Issue	138	Pages	14288-14293
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Hetero-nanocrystals consisting of a CdSe core and a giant CdS shell have shown remarkable optical properties which are promising for applications in opto-electrical devices. Since these properties sensitively depend on the size and shape, a morphological characterization is of high interest. Here, we present a High Angle Annular Dark Field Scanning Transmission Electron Microscopy (HAADF-STEM) study of CdSe (core) / CdS (giant shell) hetero-nanocrystals. Electron tomography reveals that the nanocrystals have a bullet shape, either ending in a tip or a small dip, and that the CdSe core is positioned closer to the tip (or dip) than to the hexagonal base. Based on a high resolution HAADF-STEM study, we were able to determine all the surface facets. We present a heuristic model for the different growth stages of the CdS crystal around the CdSe core.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000387095000026	Publication Date	2016-11-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0002-7863	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.858	Times cited	28	Open Access	OpenAccess
	Notes	S.B. acknowledges financial support from European Research Council (ERC Starting Grant #335078-COLOURATOMS). D.V. wishes to acknowledge the Dutch Foundation for Fundamental Research on Matter (FOM) in the programme ‘Designing Dirac Carriers in Semiconductor Superstructures’. E.B. gratefully acknowledges financial support by the Flemish Fund for Scientific Research (FWO Vlaanderen).; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 13.858
	Call Number	EMAT @ emat @ c:irua:138251			Serial	4325
Permanent link to this record