| |
Records |
|
Author |
Zhang, F.; Batuk, M.; Hadermann, J.; Manfredi, G.; Mariën, A.; Vanmeensel, K.; Inokoshi, M.; Van Meerbeek, B.; Naert, I.; Vleugels, J. |
| |
Title |
Effect of cation dopant radius on the hydrothermal stability of tetragonal zirconia: Grain boundary segregation and oxygen vacancy annihilation |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
| |
Volume |
106 |
Issue |
106 |
Pages |
48-58 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
The hydrothermal aging stability of 3Y-TZP-xM2O3 (M = La, Nd, Sc) was investigated as a function of 0.02–5 mol% M2O3 dopant content and correlated to the overall phase content, t-ZrO2 lattice parameters, grain size distribution, grain boundary chemistry and ionic conductivity.
The increased aging stability with increasing Sc2O3 content and the optimum content of 0.4–0.6 mol% Nd2O3 or 0.2–0.4 mol% La2O3, resulting in the highest aging resistance, could be directly related to the constituent phases and the lattice parameters of the remaining tetragonal zirconia.
At low M2O3 dopant contents ≤0.4 mol%, the different aging behavior of tetragonal zirconia was attributed to the defect structure of the zirconia grain boundary which was influenced by the dopant cation radius. It was observed that the grain boundary ionic resistivity and the aging resistance followed the same trend: La3+ > Nd3+ > Al3+ > Sc3+, proving that hydrothermal aging is driven by the diffusion of water-derived mobile species through the oxygen vacancies. Accordingly, we elucidated the underlying mechanism by which a larger trivalent cation segregating at the zirconia grain boundary resulted in a higher aging resistance. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000371650300006 |
Publication Date |
2016-01-08 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
5.301 |
Times cited |
37 |
Open Access |
|
| |
Notes  |
The authors acknowledge the Research Fund of KU Leuven under project 0T/10/052 and the Fund for Scientific Research Flanders (FWO-Vlaanderen) under grant G.0431.10N. F. Zhang thanks the Research Fund of KU Leuven for her post-doctoral fellowship (PDM/15/153). |
Approved |
Most recent IF: 5.301 |
| |
Call Number |
c:irua:132435 |
Serial |
4076 |
| Permanent link to this record |
| |
|
| |
|
Author |
Zhang, F.; Inokoshi, M.; Batuk, M.; Hadermann, J.; Naert, I.; Van Meerbeek, B.; Vleugels, J. |
| |
Title |
Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Dental Materials |
Abbreviated Journal |
Dent Mater |
| |
Volume |
32 |
Issue |
32 |
Pages |
e327-e337 |
| |
Keywords |
A1 Journal article; Electron Microscopy for Materials Science (EMAT); |
| |
Abstract |
OBJECTIVE: The aim was to evaluate the optical properties, mechanical properties and aging stability of yttria-stabilized zirconia with different compositions, highlighting the influence of the alumina addition, Y2O3 content and La2O3 doping on the translucency. METHODS: Five different Y-TZP zirconia powders (3 commercially available and 2 experimentally modified) were sintered under the same conditions and characterized by X-ray diffraction with Rietveld analysis and scanning electron microscopy (SEM). Translucency (n=6/group) was measured with a color meter, allowing to calculate the translucency parameter (TP) and the contrast ratio (CR). Mechanical properties were appraised with four-point bending strength (n=10), single edge V-notched beam (SEVNB) fracture toughness (n=8) and Vickers hardness (n=10). The aging stability was evaluated by measuring the tetragonal to monoclinic transformation (n=3) after accelerated hydrothermal aging in steam at 134 degrees C, and the transformation curves were fitted by the Mehl-Avrami-Johnson (MAJ) equation. Data were analyzed by one-way ANOVA, followed by Tukey's HSD test (alpha=0.05). RESULTS: Lowering the alumina content below 0.25wt.% avoided the formation of alumina particles and therefore increased the translucency of 3Y-TZP ceramics, but the hydrothermal aging stability was reduced. A higher yttria content (5mol%) introduced about 50% cubic zirconia phase and gave rise to the most translucent and aging-resistant Y-TZP ceramics, but the fracture toughness and strength were considerably sacrificed. 0.2mol% La2O3 doping of 3Y-TZP tailored the grain boundary chemistry and significantly improved the aging resistance and translucency. Although the translucency improvement by La2O3 doping was less effective than for introducing a substantial amount of cubic zirconia, this strategy was able to maintain the mechanical properties of typical 3Y-TZP ceramics. SIGNIFICANCE: Three different approaches were compared to improve the translucency of 3Y-TZP ceramics. |
| |
Address |
KU Leuven, Department of Materials Engineering, Kasteelpark Arenberg 44, Belgium |
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
English |
Wos |
000389516400003 |
Publication Date |
2016-10-06 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0109-5641 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.07 |
Times cited |
|
Open Access |
|
| |
Notes |
The authors acknowledge the Research Fund of KU Leu- ven under project 0T/10/052 and the Fund for Scientific Research Flanders (FWO-Vlaanderen) under grant G.0431.10N. F. Zhang thanks the Research Fund of KU Leuven for her post- doctoral fellowship (PDM/15/153). We thank M. Peumans for the translucency measurements. |
Approved |
Most recent IF: 4.07 |
| |
Call Number |
EMAT @ emat @ c:irua:136821 |
Serial |
4313 |
| Permanent link to this record |
| |
|
| |
|
Author |
Fatermans, J.; Romolini, G.; Altantzis, T.; Hofkens, J.; Roeffaers, M.B.J.; Bals, S.; Van Aert, S. |
| |
Title |
Atomic-scale detection of individual lead clusters confined in Linde Type A zeolites |
Type |
A1 Journal article |
| |
Year |
2022 |
Publication |
Nanoscale |
Abbreviated Journal |
Nanoscale |
| |
Volume |
|
Issue |
|
Pages |
|
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Applied Electrochemistry & Catalysis (ELCAT) |
| |
Abstract |
Structural analysis of metal clusters confined in nanoporous materials is typically performed by X-ray-driven techniques. Although X-ray analysis has proved its strength in the characterization of metal clusters, it provides averaged structural information. Therefore, we here present an alternative workflow for bringing the characterization of confined metal clusters towards the local scale. This workflow is based on the combination of aberration-corrected transmission electron microscopy (TEM), TEM image simulations, and powder X-ray diffraction (XRD) with advanced statistical techniques. In this manner, we were able to characterize the clustering of Pb atoms in Linde Type A (LTA) zeolites with Pb loadings as low as 5 wt%. Moreover, individual Pb clusters could be directly detected. The proposed methodology thus enables a local-scale characterization of confined metal clusters in zeolites. This is important for further elucidation of the connection between the structure and the physicochemical properties of such systems. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000809619900001 |
Publication Date |
0000-00-00 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2040-3364 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
6.7 |
Times cited |
2 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge the Research Foundation Flanders through project fundings (FWO, G026718N, G050218N, ZW15_09-G0H6316N, and W002221N) and through a PhD scholarship to G.R. (grant 11C6920N), as well as iBOF-21-085 PERSIST. T.A. and S.V.A. acknowledge funding from the University of Antwerp Research fund (BOF). J.H. acknowledges the Flemish government through long-term structural funding Methusalem (CASAS2, Meth/15/04) and the MPI as MPI fellow. M.R. acknowledges funding by the KU Leuven Research Fund (C14/19/079). S.B. and S.V.A. acknowledge funding from the European Research Council under the European Union’s Horizon 2020 research and innovation program (ERC Consolidator Grants No. 815128−REALNANO and No. 770887−PICOMETRICS). The authors thank Dr. D. Chernyshov for the collection of XRD measurements. |
Approved |
Most recent IF: 6.7 |
| |
Call Number |
EMAT @ emat @c:irua:189061 |
Serial |
7076 |
| Permanent link to this record |
| |
|
| |
|
Author |
Ciocarlan, R.-G.; Seftel, E.M.; Gavrila, R.; Suchea, M.; Batuk, M.; Mertens, M.; Hadermann, J.; Cool, P. |
| |
Title |
Spinel nanoparticles on stick-like Freudenbergite nanocomposites as effective smart-removal photocatalysts for the degradation of organic pollutants under visible light |
Type |
A1 Journal article |
| |
Year |
2020 |
Publication |
Journal Of Alloys And Compounds |
Abbreviated Journal |
J Alloy Compd |
| |
Volume |
820 |
Issue |
|
Pages |
153403 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA) |
| |
Abstract |
A series of mixed nanocomposite materials was synthetized, containing a Ferrite phase type Zn1-xNixFe2O4 and a Freudenbergite phase type Na2Fe2Ti6O16, where x = 0; 0.2; 0.4; 0.6; 0.8; 1. The choice for this combination is based on the good adsorption properties of Freudenbergite for dye molecules, and the small bandgap energy of Ferrite spinel, allowing activation of the catalysts under visible light irradiation. A two steps synthesis protocol was used to obtain the smart-removal nanocomposites. Firstly, the spinel structure was obtained via the co-precipitation route followed by the addition of the Ti-source and formation of the Freudenbergite system. The role of cations on the formation mechanism and an interesting interchange of cations between spinel and Freudenbergite structures was clarified by a TEM study. Part of the Ti4+ penetrated the spinel structure and, at the same time, part of the Fe3+ formed the Freudenbergite system. The photocatalytic activity was studied under visible light, reaching for the best catalysts a 67% and 40% mineralization degree for methylene blue and rhodamine 6G respectively, after 6 h of irradiation. In the same conditions, the well-known commercial P25 (Degussa) managed to mineralize only 12% and 3% of methylene blue and rhodamine 6G, respectively. Due to the remarkable magnetic properties of Ferrites, a convenient recovery and reuse of the catalysts is possible after the photocatalytic tests. Based on the excellent catalytic performance of the nanocomposites under visible light and their ease of separation out of the solution after the catalytic reaction, the newly developed composite catalysts are considered very effective for wastewater treatment. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000507854700130 |
Publication Date |
2019-12-15 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0925-8388 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
6.2 |
Times cited |
|
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge the FWO-Flanders (project nr. G038215N) for financial support. |
Approved |
Most recent IF: 6.2; 2020 IF: 3.133 |
| |
Call Number |
EMAT @ emat @c:irua:166447 |
Serial |
6342 |
| Permanent link to this record |
| |
|
| |
|
Author |
Barreca, D.; Carraro, G.; Gasparotto, A.; Maccato, C.; Warwick, M.E.A.; Turner, S.; Van Tendeloo, G. |
| |
Title |
Fabrication and Characterization of Fe2O3-Based Nanostructures Functionalized with Metal Particles and Oxide Overlayers |
Type |
A1 Journal article |
| |
Year |
2015 |
Publication |
Journal of advanced microscopy research |
Abbreviated Journal |
|
| |
Volume |
10 |
Issue |
10 |
Pages |
239-243 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
We report on the design of nanosystems based on functionalized -Fe 2 O 3 nanostructures supported on fluorine-doped tin oxide (FTO) substrates. The target materials were developed by means of hybrid vapor phase approaches, combining plasma assisted-chemical vapor deposition (PA-CVD) for the production of iron(III) oxide systems and the subsequent radio frequency (RF)-sputtering or atomic layer deposition (ALD) for the functionalization with Au nanoparticles or TiO 2 overlayers, respectively. The interplay between material characteristics and the adopted processing parameters was investigated by complementary analytical techniques, encompassing X-ray photoelectron spectroscopy (XPS), field emission-scanning electron microscopy (FE-SEM), high angle annular dark field-scanning transmission electron microscopy (HAADF-STEM), and energy dispersive X-ray spectroscopy (EDXS). The obtained results highlight the possibility of fabricating Au/ -Fe 2 O 3 nanocomposites, with a controlled dispersion and distribution of metal particles, and TiO 2 / -Fe 2 O 3 heterostructures, characterized by an intimate coupling between the constituent oxides. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
|
Publication Date |
2015-12-01 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2156-7573 |
ISBN |
|
Additional Links |
UA library record |
| |
Impact Factor |
|
Times cited |
|
Open Access |
|
| |
Notes |
The authors acknowledge the financial support under the FP7 project “SOLARO- GENIX” (NMP4-SL-2012-310333), as well as Padova University ex-60% 2012–2015 projects, grant n CPDR132937/13 (SOLLEONE), and Regione Lombardia- INSTM ATLANTE program. Stuart Turner acknowledges the FWO Flanders for a post-doctoral scholarship. Thanks are also due to Dr. L. Borgese and Prof. E. Bontempi (Chemistry for Technologies Laboratory, Brescia Univer- sity, Italy) for precious assistance in ALD experiments. |
Approved |
Most recent IF: NA |
| |
Call Number |
EMAT @ emat @ c:irua:132798 |
Serial |
4058 |
| Permanent link to this record |
| |
|
| |
|
Author |
Sa, J.; Hu, N.; Heyvaert, W.; Van Gordon, K.; Li, H.; Wang, L.; Bals, S.; Liz-Marzán, L.M.; Ni, W. |
| |
Title |
Spontaneous Chirality Evolved at the Au–Ag Interface in Plasmonic Nanorods |
Type |
A1 Journal article |
| |
Year |
2023 |
Publication |
Chemistry of materials |
Abbreviated Journal |
Chem. Mater. |
| |
Volume |
|
Issue |
|
Pages |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Chiral ligands are considered a required ingredient during the synthesis of dissymmetric plasmonic metal nanocrystals. The mechanism behind the generation of chiral structures involves the formation of high Miller index chiral facets, induced by the adsorption of such chiral ligands. We found however that, chirality can also evolve spontaneously, without the involvement of any chiral ligands, during the co-deposition of Au and Ag on Au nanorods. When using a specific Au/Ag ratio, phase segregation of the two metals leads to an interface within the obtained AuAg shell, which can be exposed by removing the Ag component via oxidative etching. Although a close-to-racemic mixture of chiral Au nanorods with right and left handedness is found in solution, electron tomography analysis evidences left- and righthanded helicities, both at the Au-Ag interface and at the exposed surface of Au NRs after Ag etching. The helicity profile of the NRs indicates dominating inclination angles in a range from 30° to 60°. Single-particle optical characterization also reveals random handedness in the plasmonic response of individual nanorods. We hypothesize that, the origin of chirality is related with symmetry breaking during the co-deposition of Au and Ag, through an initial perturbation in a small region on the Au-Ag interface that eventually leads to chiral segregation throughout the nanocrystal. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
001052093300001 |
Publication Date |
2023-08-21 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0897-4756 |
ISBN |
|
Additional Links |
UA library record; WoS full record |
| |
Impact Factor |
8.6 |
Times cited |
|
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge the financial support from the National Natural Science Foundation of China (grant 22074102). LMLM acknowledges funding from 26 MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future” (Grant PID2020- 117779RB-I00). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 823717 – ESTEEM3.; Ministerio de Ciencia e Innovaci?n, PID2020-117779RB-I00 ; H2020 Research Infrastructures, 823717 ; European Social Fund, PID2020-117779RB-I00 ; National Natural Science Foundation of China, 22074102 ; |
Approved |
Most recent IF: 8.6; 2023 IF: 9.466 |
| |
Call Number |
EMAT @ emat @c:irua:198151 |
Serial |
8810 |
| Permanent link to this record |
| |
|
| |
|
Author |
Locardi, F.; Samoli, M.; Martinelli, A.; Erdem, O.; Vale Magalhaes, D.; Bals, S.; Hens, Z. |
| |
Title |
Cyan emission in two-dimensional colloidal Cs2CdCl4:SB3+ Ruddlesden-Popper phase nanoplatelets |
Type |
A1 Journal article |
| |
Year |
2021 |
Publication |
Acs Nano |
Abbreviated Journal |
Acs Nano |
| |
Volume |
15 |
Issue |
11 |
Pages |
17729-17737 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Metal halide perovskites are one of the most investigated materials in optoelectronics, with their lead-based counterparts being renowned for their enhanced optoelectronic performance. The 3D CsPbX3 structure has set the standard with many studies currently attempting to substitute lead with other metals while retaining the properties of this material. This effort has led to the fabrication of metal halides with lower dimensionality, wherein particular 2D layered perovskite structures have captured attention as inspiration for the next generation of colloidal semiconductors. Here we report the synthesis of the Ruddlesden-Popper Cs2CdCl4:Sb3+ phase as colloidal nanoplatelets (NPs) using a facile hot injection approach under atmospheric conditions. Through strict adjustment of the synthesis parameters with emphasis on the ligand ratio, we obtained NPs with a relatively uniform size and good morphological control. The particles were characterized through transmission electron microscopy, synchrotron X-ray diffraction, and pair distribution function analysis. The spectroscopic characterization revealed most strikingly an intense cyan emission under UV excitation with a measured PLQY of similar to 20%. The emission was attributed to the Sb3+-doping within the structure. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000747115200053 |
Publication Date |
0000-00-00 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1936-0851 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
13.942 |
Times cited |
34 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge the European Synchrotron Radiation Facility for provision of synchrotron radiation facilities and they would like to thank Andrew Fitch for assistance in using beamline ID22 (proposal HC-4098). Z.H. and S.B acknowledge funding from the Research Foundation − Flanders (FWO-Vlaanderen under the SBO − PROCEED project (No: S0002019N). Z.H. acknowledges Ghent University for funding (BOF-GOA 01G01019). S.B. is grateful to the European Research Council (ERC Consolidator Grant 815128, REALNANO). F.L. thanks Emanuela Sartori and Stefano Toso for the fruitful discussions. M.S. would like to thank Olivier Janssens for collecting XRPD data and Gabriele Pippia for helpful insights and discussions. |
Approved |
Most recent IF: 13.942 |
| |
Call Number |
UA @ admin @ c:irua:186465 |
Serial |
7059 |
| Permanent link to this record |
| |
|
| |
|
Author |
Leusink, D.P.; Coneri, F.; Hoek, M.; Turner, S.; Idrissi, H.; Van Tendeloo, G.; Hilgenkamp, H. |
| |
Title |
Thin films of the spin ice compound Ho2Ti2O7 |
Type |
A1 Journal article |
| |
Year |
2014 |
Publication |
APL materials |
Abbreviated Journal |
Apl Mater |
| |
Volume |
2 |
Issue |
3 |
Pages |
032101-32107 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
The pyrochlore compounds Ho2Ti2O7 and Dy2Ti2O7 show an exotic form of magnetism called the spin ice state, resulting from the interplay between geometrical frustration and ferromagnetic coupling. A fascinating feature of this state is the appearance of magnetic monopoles as emergent excitations above the degenerate ground state. Over the past years, strong effort has been devoted to the investigation of these monopoles and other properties of the spin ice state in bulk crystals. Here, we report the fabrication of Ho2Ti2O7 thin films using pulsed laser deposition on yttria-stabilized ZrO2 substrates. We investigated the structural properties of these films by X-ray diffraction, scanning transmission electron microscopy, and atomic force microscopy, and the magnetic properties by vibrating sample magnetometry at 2 K. The films not only show a high crystalline quality, but also exhibit the hallmarks of a spin ice: a pronounced magnetic anisotropy and an intermediate plateau in the magnetization along the [111] crystal direction. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000334220300002 |
Publication Date |
2014-03-04 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2166-532X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.335 |
Times cited |
18 |
Open Access |
|
| |
Notes |
The authors acknowledge support from the Dutch FOM and NWO foundations and from the European Union under the Framework 7 program under a contract from an Integrated Infrastructure Initiative (Reference 312483 ESTEEM2). G.V.T. acknowledges the ERC Grant N246791- COUNTATOMS. S.T. gratefully acknowledges financial support from the Fund for Scientific Research Flanders (FWO). H.I. acknowledges the IAP program of the Belgian State Federal Office for Scientific, Technical and Cultural Affairs under Contract No. P7/21. The microscope used in this study was partially financed by the Hercules Foundation of the Flemish Government. The authors acknowledge fruitful interactions with A. Brinkman, M. G. Blamire, M. Egilmez, F. J. G. Roesthuis, J. N. Beukers, C. G. Molenaar, M. Veldhorst, and X. Renshaw Wang; esteem2_ta |
Approved |
Most recent IF: 4.335; 2014 IF: NA |
| |
Call Number |
UA @ lucian @ c:irua:115555 |
Serial |
3641 |
| Permanent link to this record |
| |
|
| |
|
Author |
Pramanik, G.; Kvakova, K.; Thottappali, M.A.; Rais, D.; Pfleger, J.; Greben, M.; El-Zoka, A.; Bals, S.; Dracinsky, M.; Valenta, J.; Cigler, P. |
| |
Title |
Inverse heavy-atom effect in near infrared photoluminescent gold nanoclusters |
Type |
A1 Journal Article |
| |
Year |
2021 |
Publication |
Nanoscale |
Abbreviated Journal |
Nanoscale |
| |
Volume |
13 |
Issue |
23 |
Pages |
10462-10467 |
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
Fluorophores functionalized with heavy elements show enhanced intersystem crossing due to increased spin–orbit coupling, which in turn shortens the fluorescence decay lifetime (<italic>τ</italic><sup>PL</sup>). This phenomenon is known as the heavy-atom effect (HAE). Here, we report the observation of increased<italic>τ</italic><sup>PL</sup>upon functionalisation of near-infrared photoluminescent gold nanoclusters with iodine. The heavy atom-mediated increase in<italic>τ</italic><sup>PL</sup>is in striking contrast with the HAE and referred to as inverse HAE. Femtosecond and nanosecond transient absorption spectroscopy revealed overcompensation of a slight decrease in lifetime of the transition associated with the Au core (ps) by a large increase in the long-lived triplet state lifetime associated with the Au shell, which contributed to the observed inverse HAE. This unique observation of inverse HAE in gold nanoclusters provides the means to enhance the triplet excited state lifetime. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
|
Publication Date |
2021-05-24 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2040-3364 |
ISBN |
|
Additional Links |
|
| |
Impact Factor |
7.367 |
Times cited |
7 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge support from GACR project Nr.18- 12533S. G. P. acknowledges support from EUSMI project No. E180200060; J.P. from the Ministry of Education, Youth and Sports of the Czech Republic – Program INTER-EXCELLENCE (LTAUSA19066). |
Approved |
Most recent IF: 7.367 |
| |
Call Number |
EMAT @ emat @ |
Serial |
6950 |
| Permanent link to this record |
| |
|
| |
|
Author |
Pramanik, G.; Kvakova, K.; Thottappali, M.A.; Rais, D.; Pfleger, J.; Greben, M.; El-Zoka, A.; Bals, S.; Dracinsky, M.; Valenta, J.; Cigler, P. |
| |
Title |
Inverse heavy-atom effect in near infrared photoluminescent gold nanoclusters |
Type |
A1 Journal article |
| |
Year |
2021 |
Publication |
Nanoscale |
Abbreviated Journal |
Nanoscale |
| |
Volume |
12 |
Issue |
23 |
Pages |
10462-10467 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Fluorophores functionalized with heavy elements show enhanced intersystem crossing due to increased spin-orbit coupling, which in turn shortens the fluorescence decay lifetime (tau(PL)). This phenomenon is known as the heavy-atom effect (HAE). Here, we report the observation of increased tau(PL) upon functionalisation of near-infrared photoluminescent gold nanoclusters with iodine. The heavy atom-mediated increase in tau(PL) is in striking contrast with the HAE and referred to as inverse HAE. Femtosecond and nanosecond transient absorption spectroscopy revealed overcompensation of a slight decrease in lifetime of the transition associated with the Au core (ps) by a large increase in the long-lived triplet state lifetime associated with the Au shell, which contributed to the observed inverse HAE. This unique observation of inverse HAE in gold nanoclusters provides the means to enhance the triplet excited state lifetime. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000657052500001 |
Publication Date |
2021-06-30 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2040-3364 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
7.367 |
Times cited |
1 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge support from GACR project no. 18-12533S. G. P. acknowledges support from EUSMI project no. E180200060; J. P. from the Ministry of Education, Youth and Sports of the Czech Republic – Program INTER-EXCELLENCE (LTAUSA19066). |
Approved |
Most recent IF: 7.367 |
| |
Call Number |
UA @ admin @ c:irua:179052 |
Serial |
6843 |
| Permanent link to this record |
| |
|
| |
|
Author |
Duarte, M.; Daems, N.; Hereijgers, J.; Arenas Esteban, D.; Bals, S.; Breugelmans, T. |
| |
Title |
Enhanced CO2 electroreduction with metal-nitrogen-doped carbons in a continuous flow reactor |
Type |
A1 Journal article |
| |
Year |
2021 |
Publication |
Journal Of Co2 Utilization |
Abbreviated Journal |
J Co2 Util |
| |
Volume |
50 |
Issue |
|
Pages |
101583-12 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Applied Electrochemistry & Catalysis (ELCAT) |
| |
Abstract |
As part of a mitigation and adaptation approach to increasing carbon dioxide atmospheric concentrations, we report superior performance of various metal-nitrogen-doped carbon catalysts, synthesized using an easily up-scalable method, for the electrochemical reduction to carbon monoxide and/or formate at industrially relevant current densities up to 200 mAcm−2. Altering the embedded transition metal (i.e. Sn, Co, Fe, Mn and Ni) allowed to tune the selectivity towards the desired product. Mn-N-C and Fe-N-C performance was compromised by its high CO* binding energy, while Co-N-C catalyzed preferentially the HER. Ni-N-C and Sn-N-C revealed to be promising electrocatalysts, the latter being evaluated for the first time in a flow reactor. A productivity of 589 L CO m-2 h-1 at -1.39 VRHE with Ni-N-C and 751 g HCOO- m-2 h-1 at -1.47 VRHE with Sn-N-C was achieved with no signs of degradation detected after 24 h of operation at industrially relevant current densities (100 mAcm−2). Stable operation at 200 mAcm−2 led to turnover frequencies for the production of carbon products of up to 5176 h-1. These enhanced productivities, in combination with high stability, constitute an essential step towards the scalability and ultimately towards the economical valorization of CO2 electrolyzers using metal-containing nitrogen-doped catalysts. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000670316000002 |
Publication Date |
2021-05-28 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2212-9820 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.292 |
Times cited |
14 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge sponsoring from the Research Foundation – Flanders (FWO) in the frame of a post-doctoral grant (12Y3919N – ND). This project was co-funded by the Interreg 2 Seas-Program 2014-2020, co-financed by the European Fund for Regional Development in the frame of subsidiary contract nr. 2S03-019. This work was further performed in the framework of the Catalisti MOT project D2M (“Dioxide to Monoxide (D2M): Innovative catalysis for CO2 to CO conversion”). We thank Lien Pacquets for analyzing the samples with SEM-EDX, Saskia Defoss´e for helping with the N2 physisorption measurements and Kitty Baert (VUB) for analyzing the samples with XPS and Raman. |
Approved |
Most recent IF: 4.292 |
| |
Call Number |
UA @ admin @ c:irua:178151 |
Serial |
6779 |
| Permanent link to this record |
| |
|
| |
|
Author |
Savina, A.A.; Saiutina, V.V.; Morozov, A.V.; Boev, A.O.; Aksyonov, D.A.; Dejoie, C.; Batuk, M.; Bals, S.; Hadermann, J.; Abakumov, A.M. |
| |
Title |
Chemistry, local molybdenum clustering, and electrochemistry in the Li2+xMo1-xO3 solid solutions |
Type |
A1 Journal article |
| |
Year |
2022 |
Publication |
Inorganic chemistry |
Abbreviated Journal |
Inorg Chem |
| |
Volume |
61 |
Issue |
14 |
Pages |
5637-5652 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
A broad range of cationic nonstoichiometry has been demonstratedfor the Li-rich layered rock-salt-type oxide Li2MoO3, which has generally been considered as a phase with a well-defined chemical composition. Li2+xMo1-xO3(-0.037 <= x <= 0.124) solid solutions were synthesized via hydrogen reduction ofLi2MoO4in the temperature range of 650-1100 degrees C, withxdecreasing with theincrease of the reduction temperature. The solid solutions adopt a monoclinicallydistorted O3-type layered average structure and demonstrate a robust localordering of the Li cations and Mo3triangular clusters within the mixed Li/Mocationic layers. The local structure was scrutinized in detail by electron diffractionand aberration-corrected scanning transmission electron microcopy (STEM),resulting in an ordering model comprising a uniform distribution of the Mo3clusters compatible with local electroneutrality and chemical composition. The geometry of the triangular clusters with their oxygenenvironment (Mo3O13groups) has been directly visualized using differential phase contrast STEM imaging. The established localstructure was used as input for density functional theory (DFT)-based calculations; they support the proposed atomic arrangementand provide a plausible explanation for the staircase galvanostatic charge profiles upon electrochemical Li+extraction fromLi2+xMo1-xO3in Li cells. According to DFT, all electrochemical capacity in Li2+xMo1-xO3solely originates from the cationic Moredox process, which proceeds via oxidation of the Mo3triangular clusters into bent Mo3chains where the electronic capacity of the clusters depends on the initial chemical composition and Mo oxidation state defining the width of the first charge low-voltageplateau. Further oxidation at the high-voltage plateau proceeds through decomposition of the Mo3chains into Mo2dimers and further into individual Mo6+cations |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000789034200023 |
Publication Date |
2022-04-01 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0020-1669 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.6 |
Times cited |
3 |
Open Access |
Not_Open_Access |
| |
Notes |
The authors acknowledge Russian Science Foundation (grant 20-43-01012) and Research Foundation Flanders (FWO Vlaanderen, project number G0F1320N) for financial support. The authors are grateful to AICF of Skoltech for providing access to electron microscopy equipment. The authors are grateful to Prof. G. Van Tendeloo for discussing the results. |
Approved |
Most recent IF: 4.6 |
| |
Call Number |
UA @ admin @ c:irua:188631 |
Serial |
7079 |
| Permanent link to this record |
| |
|
| |
|
Author |
Peters, J.L.; Altantzis, T.; Lobato, I.; Jazi, M.A.; van Overbeek, C.; Bals, S.; Vanmaekelbergh, D.; Sinai, S.B. |
| |
Title |
Mono- and Multilayer Silicene-Type Honeycomb Lattices by Oriented Attachment of PbSe Nanocrystals: Synthesis, Structural Characterization, and Analysis of the Disorder |
Type |
A1 Journal article |
| |
Year |
2018 |
Publication |
Chemistry of materials |
Abbreviated Journal |
Chem Mater |
| |
Volume |
30 |
Issue |
30 |
Pages |
4831-4837 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Nanocrystal (NC) solids are commonly prepared from nonpolar organic NC suspensions. In many cases, the capping on the NC surface is preserved and forms a barrier between the NCs. More recently, superstructures with crystalline connections between the NCs, implying the removal of the capping, have been reported, too. Here, we present large-scale uniform superstructures of attached PbSe NCs with a silicene-type honeycomb geometry, resulting from solvent evaporation under nearly reversible conditions. We also prepared multilayered silicene honeycomb structures by using larger amounts of PbSe NCs. We show that the two-dimensional silicene superstructures can be seen as a crystallographic slice from a 3-D simple cubic structure. We describe the disorder in the silicene lattices in terms of the nanocrystals position and their atomic alignment. The silicene honeycomb sheets are large enough to be used in transistors and optoelectronic devices. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000440105500042 |
Publication Date |
2018-07-24 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0897-4756 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
9.466 |
Times cited |
33 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge funding from the European Commission (Grant EUSMI 731019). S.B. acknowledges funding from the European Research Council (Grant 335078 COLOURATOM). T.A. acknowledges a postdoctoral grant from the Research Foundation Flanders (FWO). The authors acknowledge financial support from the European Commission under the Horizon 2020 Programme by means of the Grant Agreement No. 731019 EUSMI. (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); ecas_sara |
Approved |
Most recent IF: 9.466 |
| |
Call Number |
EMAT @ emat @c:irua:152997UA @ admin @ c:irua:152997 |
Serial |
5011 |
| Permanent link to this record |
| |
|
| |
|
Author |
Degutis, G.; Pobedinskas, P.; Turner, S.; Lu, Y.-G.; Al Riyami, S.; Ruttens, B.; Yoshitake, T.; D'Haen, J.; Haenen, K.; Verbeeck, J.; Hardy, A.; Van Bael, M.K. |
| |
Title |
CVD diamond growth from nanodiamond seeds buried under a thin chromium layer |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Diamond and related materials |
Abbreviated Journal |
Diam Relat Mater |
| |
Volume |
64 |
Issue |
64 |
Pages |
163-168 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
This work presents a morphological and structural analysis of CVD diamond growth on silicon from nanodiamond seeds covered by a 50 nm thick chromium layer. The role of carbon diffusion as well as chromium and carbon silicide formation is analyzed. The local diamond environment is investigated by scanning transmission electron microscopy in combination with electron energy-loss spectroscopy. The evolution of the diamond phase composition (sp3/sp2) is evaluated by micro-Raman spectroscopy. Raman and X-ray diffraction analysis are used to identify the interfacial phases formed during CVD growth. Based upon the observed morphological and structural evolution, a diamond growth model from nanodiamond seeds buried beneath a thin Cr layer is proposed. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000374608100020 |
Publication Date |
2016-02-20 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0925-9635 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
2.561 |
Times cited |
11 |
Open Access |
|
| |
Notes |
The authors acknowledge financial support provided by Research Program FWO G.056.810 and G0044.13N. A.H. and M.K.V.B are grateful to Hercules Foundation Flanders for financial support. P.P. and S.T. are Postdoctoral Fellows of the Research Foundation – Flanders (FWO). The Titan microscope used for this work was partially funded by the Hercules Foundation. |
Approved |
Most recent IF: 2.561 |
| |
Call Number |
c:irua:133624UA @ admin @ c:irua:133624 |
Serial |
4091 |
| Permanent link to this record |
| |
|
| |
|
Author |
Cremers, V.; Rampelberg, G.; Baert, K.; Abrahami, S.; Claes, N.; de Oliveira, T.M.; Terryn, H.; Bals, S.; Dendooven, J.; Detavernier, C. |
| |
Title |
Corrosion protection of Cu by atomic layer deposition |
Type |
A1 Journal article |
| |
Year |
2019 |
Publication |
Journal of vacuum science and technology: A: vacuum surfaces and films |
Abbreviated Journal |
J Vac Sci Technol A |
| |
Volume |
37 |
Issue |
37 |
Pages |
060902 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Atomic layer deposition (ALD) is a vapor phase technique that is able to deposit uniform, conformal thin films with an excellent thickness control at the atomic scale. 18 nm thick Al2O3 and TiO2 coatings were deposited conformaly and pinhole-free onto micrometer-sized Cu powder, using trimethylaluminum and tetrakis(dimethylamido)titanium(IV), respectively, as a precursor and de-ionized water as a reactant. The capability of the ALD coating to protect the Cu powder against corrosion was investigated. Therefore, the stability of the coatings was studied in solutions with different pH in the range of 0–14, and in situ raman spectroscopy was used to detect the emergence of corrosion products of Cu as an indication that the protective coating starts to fail. Both ALD coatings provide good protection at standard pH values in the range of 5–7. In general, the TiO2 coating shows a better barrier protection against corrosion than the Al2O3 coating. However, for the most extreme pH conditions, pH 0 and pH 14, the TiO2 coating starts also to degrade. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000517925800003 |
Publication Date |
2019-09-19 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0734-2101 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
1.374 |
Times cited |
7 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge financial support from the Strategic Initiative Materials in Flanders (SIM, SBO-FUNC project) and the Special Research Fund BOF of Ghent University (No. GOA 01G01513). J.D. acknowledges the Research Foundation Flanders (FWO-Vlaanderen) for a postdoctoral fellowship. |
Approved |
Most recent IF: 1.374 |
| |
Call Number |
EMAT @ emat @c:irua:162640 |
Serial |
5361 |
| Permanent link to this record |
| |
|
| |
|
Author |
Cremers, V.; Rampelberg, G.; Barhoum, A.; Walters, P.; Claes, N.; Oliveira, T.M. de; Assche, G.V.; Bals, S.; Dendooven, J.; Detavernier, C. |
| |
Title |
Oxidation barrier of Cu and Fe powder by Atomic Layer Deposition |
Type |
A1 Journal article |
| |
Year |
2018 |
Publication |
Surface and coatings technology |
Abbreviated Journal |
Surf Coat Tech |
| |
Volume |
349 |
Issue |
349 |
Pages |
1032-1041 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Atomic layer deposition (ALD) is a vapor based technique which allows to deposit uniform, conformal films with a thickness control at the atomic scale. In this research, Al 2 O 3 coatings were deposited on micrometer-sized Fe and Cu powder (particles) using the thermal trimethylaluminum (TMA)/ water (H 2 O) process in a rotary pump-type ALD reactor. Rotation of the powder during deposition was required to obtain a pinhole-free ALD coating. The protective nature of the coating was evaluated by quantifying its effectiveness in protecting the metal particles during oxidative annealing treatments. The Al 2 O 3 coated powders were annealed in ambient air while in-situ thermogravimetric analysis (TGA) and in-situ x-ray diffraction (XRD) data were acquired. The thermal stability of a series of Cu and Fe powder with different Al 2 O 3 thicknesses were determined with TGA. In both samples a clear shift in oxidation temperature is visible. For Cu and Fe powder coated with 25 nm Al 2 O 3 , we observed an increase of the oxidation temperature with 300-400°C. For the Cu powder a thin film of only 8 nm is required to obtain an initial increase in oxidation temperature of 200°C. In contrast, for Fe powder a thicker coating of 25 nm is required. In both cases, the oxidation temperature increases with increasing thickness of the Al 2 O 3 coating. These results illustrate that the Al 2 O 3 thin film, deposited by the thermal ALD process (TMA/H 2 O) can be an efficient and pinhole-free barrier layer for micrometer-sized powder particles, provided that the powder is properly agitated during the process to ensure sufficient vapour-solid interaction. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000441492600108 |
Publication Date |
2018-06-25 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0257-8972 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
2.589 |
Times cited |
10 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge financial support from the Strategic Initiative Materials in Flanders (SIM, SBO-FUNC project) and the Special Research Fund BOF of Ghent University (GOA 01G01513). J. D. acknowledges the Research Foundation Flanders (FWO-Vlaanderen) for a postdoctoral fellowship. N.C. and S.B. acknowledge financial support from European Research Council (ERC Starting Grant 335078-COLOURATOMS). The authors acknowledge S. Goeteyn for the assistance in preliminary depositions. (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot); ecas_sara |
Approved |
Most recent IF: 2.589 |
| |
Call Number |
EMAT @ emat @c:irua:152174UA @ admin @ c:irua:152174 |
Serial |
4994 |
| Permanent link to this record |
| |
|
| |
|
Author |
Fatermans, J.; den Dekker, A. J.; Müller-Caspary, K.; Lobato, I.; O’Leary, C. M.; Nellist, P. D.; Van Aert, S. |
| |
Title |
Single Atom Detection from Low Contrast-to-Noise Ratio Electron Microscopy Images |
Type |
A1 Journal article |
| |
Year |
2018 |
Publication |
Physical review letters |
Abbreviated Journal |
Phys Rev Lett |
| |
Volume |
121 |
Issue |
5 |
Pages |
056101 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
| |
Abstract |
Single atom detection is of key importance to solving a wide range of scientific and technological problems. The strong interaction of electrons with matter makes transmission electron microscopy one of the most promising techniques. In particular, aberration correction using scanning transmission electron microscopy has made a significant step forward toward detecting single atoms. However, to overcome radiation damage, related to the use of high-energy electrons, the incoming electron dose should be kept low enough. This results in images exhibiting a low signal-to-noise ratio and extremely weak contrast, especially for light-element nanomaterials. To overcome this problem, a combination of physics-based model fitting and the use of a model-order selection method is proposed, enabling one to detect single atoms with high reliability. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000440143200007 |
Publication Date |
2018-07-30 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0031-9007 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
8.462 |
Times cited |
6 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge financial support from the Research Foundation Flanders (FWO, Belgium) through Project fundings (No. WO.010.16N, No. G.0368.15N, No. G.0502.18N). The authors are grateful to M. Van Bael and P. Lievens (KU Leuven) and to L. M. Liz-Marzán (CIC biomaGUNE and Ikerbasque) for providing the samples. This project has received funding from the European Research Council (ERC) under the European Unions Horizon 2020 research and innovation programme (Grant Agreement No. 770887). |
Approved |
Most recent IF: 8.462 |
| |
Call Number |
EMAT @ emat @c:irua:152819 |
Serial |
5004 |
| Permanent link to this record |
| |
|
| |
|
Author |
Martinez, G.T.; van den Bos, K.H.W.; Alania, M.; Nellist, P.D.; Van Aert, S. |
| |
Title |
Thickness dependence of scattering cross-sections in quantitative scanning transmission electron microscopy |
Type |
A1 Journal article |
| |
Year |
2018 |
Publication |
Ultramicroscopy |
Abbreviated Journal |
Ultramicroscopy |
| |
Volume |
187 |
Issue |
|
Pages |
84-92 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
In quantitative scanning transmission electron microscopy (STEM), scattering cross-sections have been shown to be very sensitive to the number of atoms in a column and its composition. They correspond to the integrated intensity over the atomic column and they outperform other measures. As compared to atomic column peak intensities, which saturate at a given thickness, scattering cross-sections increase monotonically. A study of the electron wave propagation is presented to explain the sensitivity of the scattering cross-sections. Based on the multislice algorithm, we analyse the wave propagation inside the crystal and its link to the scattered signal for the different probe positions contained in the scattering cross-section for detector collection in the low-, middle- and high-angle regimes. The influence to the signal from scattering of neighbouring columns is also discussed. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000428131200011 |
Publication Date |
2018-01-31 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0304-3991 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
2.843 |
Times cited |
4 |
Open Access |
Not_Open_Access: Available from 01.02.2020
|
| |
Notes |
The authors acknowledge financial support from the Research Foundation Flanders (FWO, Belgium) through project fundings ( G.0374.13N , G.0369.15N , G.0368.15N and WO.010.16N ) and a PhD grant to K.H.W.v.d.B. The research leading to these results has received funding from the European Union 7th Framework Programme [ FP7 /2007-2013] under Grant agreement no. 312483 (ESTEEM2). The authors are grateful to A. Rosenauer for providing access to the StemSim software. |
Approved |
Most recent IF: 2.843 |
| |
Call Number |
EMAT @ emat @c:irua:149384 |
Serial |
4809 |
| Permanent link to this record |
| |
|
| |
|
Author |
Schryvers, D.; Salje, E.K.H.; Nishida, M.; De Backer, A.; Idrissi, H.; Van Aert, S. |
| |
Title |
Quantification by aberration corrected (S)TEM of boundaries formed by symmetry breaking phase transformations |
Type |
A1 Journal article |
| |
Year |
2017 |
Publication |
Ultramicroscopy |
Abbreviated Journal |
Ultramicroscopy |
| |
Volume |
176 |
Issue |
|
Pages |
194-199 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
The present contribution gives a review of recent quantification work of atom displacements, atom site occupations and level of crystallinity in various systems and based on aberration corrected HR(S)TEM images. Depending on the case studied, picometer range precisions for individual distances can be obtained, boundary widths at the unit cell level determined or statistical evolutions of fractions of the ordered areas calculated. In all of these cases, these quantitative measures imply new routes for the applications of the respective materials. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000403992200026 |
Publication Date |
2017-01-09 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0304-3991 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
2.843 |
Times cited |
1 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge financial support from the Fund for Scientific Research-Flanders (G.0064.10N, G.0393.11N, G.0374.13N, G.0368.15N, G.0369.15N) and the Flemish Hercules 3 program for large infrastructure as well as financial support from the European Union Seventh Framework Programme (FP7/2007 – 2013) under Grant agreement no. 312483 (ESTEEM2). EKHS thanks EPSRC (EP/ K009702/1) and the Leverhulme trust (EM-2016-004) for support. DS and MN acknowledge financial support from the Japan Society for the Promotion of Science (JSPS, Japan) through the Grant-in-Aid for Scientific Research (A: No. 26249090) and the Strategic Young Researcher Overseas Visits Program for Accelerating Brain Circulation (R2408). |
Approved |
Most recent IF: 2.843 |
| |
Call Number |
EMAT @ emat @c:irua:149654 |
Serial |
4914 |
| Permanent link to this record |
| |
|
| |
|
Author |
Alania, M.; De Backer, A.; Lobato, I.; Krause, F.F.; Van Dyck, D.; Rosenauer, A.; Van Aert, S. |
| |
Title |
How precise can atoms of a nanocluster be located in 3D using a tilt series of scanning transmission electron microscopy images? |
Type |
A1 Journal article |
| |
Year |
2017 |
Publication |
Ultramicroscopy |
Abbreviated Journal |
Ultramicroscopy |
| |
Volume |
181 |
Issue |
181 |
Pages |
134-143 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
| |
Abstract |
In this paper, we investigate how precise atoms of a small nanocluster can ultimately be located in three dimensions (3D) from a tilt series of images acquired using annular dark field (ADF) scanning transmission electron microscopy (STEM). Therefore, we derive an expression for the statistical precision with which the 3D atomic position coordinates can be estimated in a quantitative analysis. Evaluating this statistical precision as a function of the microscope settings also allows us to derive the optimal experimental design. In this manner, the optimal angular tilt range, required electron dose, optimal detector angles, and number of projection images can be determined. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000411170800016 |
Publication Date |
2016-12-15 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0304-3991 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
2.843 |
Times cited |
3 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge financial support from the European Union under the Seventh Framework Program under a contract for an Integrated Infrastructure Initiative. Reference No. 312483-ESTEEM2. The authors acknowledge financial support from the Research Foundation Flanders (FWO, Belgium) through project fundings (G.0374.13N, G.0369.15N, G.0368.15N, and WO.010.16N) and a post-doctoral grant to A. De Backer, and from the DFG under contract No. RO-2057/4-2. |
Approved |
Most recent IF: 2.843 |
| |
Call Number |
EMAT @ emat @ c:irua:144432 |
Serial |
4618 |
| Permanent link to this record |
| |
|
| |
|
Author |
Alania, M.; Altantzis, T.; De Backer, A.; Lobato, I.; Bals, S.; Van Aert, S. |
| |
Title |
Depth sectioning combined with atom-counting in HAADF STEM to retrieve the 3D atomic structure |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Ultramicroscopy |
Abbreviated Journal |
Ultramicroscopy |
| |
Volume |
177 |
Issue |
177 |
Pages |
36-42 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Aberration correction in scanning transmission electron microscopy (STEM) has greatly improved the lateral and depth resolution. When using depth sectioning, a technique during which a series of images is recorded at different defocus values, single impurity atoms can be visualised in three dimensions. In this paper, we investigate new possibilities emerging when combining depth sectioning and precise atom-counting in order to reconstruct nanosized particles in three dimensions. Although the depth resolution does not allow one to precisely locate each atom within an atomic column, it will be shown that the depth location of an atomic column as a whole can be measured precisely. In this manner, the morphology of a nanoparticle can be reconstructed in three dimensions. This will be demonstrated using simulations and experimental data of a gold nanorod. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000401219800006 |
Publication Date |
2016-11-09 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0304-3991 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
2.843 |
Times cited |
13 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge financial support from the European Union under the Seventh Framework Program under a contract for an Integrated Infrastructure Initiative. Reference No. 312483-ESTEEM2. S. Bals acknowledges funding from the European Research Council (Starting Grant No. COLOURATOMS 335078). The authors acknowledge financial support from the Research Foundation Flanders (FWO, Belgium) through project fundings (G.0374.13N, G.0369.15N and G.0368.15N) and a post-doctoral grant to A. De Backer and T. Altantzis. The authors are grateful to Professor Luis M. Liz-Marzán for providing the sample.; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot); |
Approved |
Most recent IF: 2.843 |
| |
Call Number |
EMAT @ emat @ c:irua:138015UA @ admin @ c:irua:138015 |
Serial |
4316 |
| Permanent link to this record |
| |
|
| |
|
Author |
dela Encarnacion, C.; Lenzi, E.; Henriksen-Lacey, M.; Molina, B.; Jenkinson, K.; Herrero, A.; Colas, L.; Ramos-Cabrer, P.; Toro-Mendoza, J.; Orue, I.; Langer, J.; Bals, S.; Jimenez de Aberasturi, D.; Liz-Marzan, L.M. |
| |
Title |
Hybrid magnetic-plasmonic nanoparticle probes for multimodal bioimaging |
Type |
A1 Journal article |
| |
Year |
2022 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
126 |
Issue |
45 |
Pages |
19519-19531 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Multimodal contrast agents, which take advantage of different imaging modalities, have emerged as an interesting approach to overcome the technical limitations of individual techniques. We developed hybrid nanoparticles comprising an iron oxide core and an outer gold spiky layer, stabilized by a biocompatible polymeric shell. The combined magnetic and optical properties of the different components provide the required functionalities for magnetic resonance imaging (MRI), surface-enhanced Raman scattering (SERS), and fluorescence imaging. The fabrication of such hybrid nanoprobes comprised the adsorption of small gold nanoparticles onto premade iron oxide cores, followed by controlled growth of spiky gold shells. The gold layer thickness and branching degree (tip sharpness) can be controlled by modifying both the density of Au nanoparticle seeds on the iron oxide cores and the subsequent nanostar growth conditions. We additionally demonstrated the performance of these hybrid multifunctional nanoparticles as multimodal contrast agents for correlative imaging of in vitro cell models and ex vivo tissues. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000883021700001 |
Publication Date |
2022-11-04 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447; 1932-7455 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
3.7 |
Times cited |
10 |
Open Access |
Not_Open_Access |
| |
Notes |
The authors acknowledge financial support from the European Research Council (ERC-AdG-2017, 787510) and MCIN/AEI/10.13039/501100011033 through grants PID2019-108854RA-I00 and Maria de Maeztu Unit of Excellence No. MDM-2017-0720. S.B. and K.J. acknowledge financial support from the European Commission under the Horizon 2020Programme by Grant No. 823717 (ESTEEM3) and ERC Consolidator Grant No. 815128 (REALNANO) . |
Approved |
Most recent IF: 3.7 |
| |
Call Number |
UA @ admin @ c:irua:192104 |
Serial |
7311 |
| Permanent link to this record |
| |
|
| |
|
Author |
Snoeckx, R.; Wang, W.; Zhang, X.; Cha, M.S.; Bogaerts, A. |
| |
Title |
Plasma-based multi-reforming for Gas-To-Liquid: tuning the plasma chemistry towards methanol |
Type |
A1 Journal article |
| |
Year |
2018 |
Publication |
Scientific reports |
Abbreviated Journal |
Sci Rep-Uk |
| |
Volume |
8 |
Issue |
1 |
Pages |
15929 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| |
Abstract |
Because of its unique properties, plasma technology has gained much prominence in the
microelectronics industry. Recently, environmental and energy applications of plasmas have gained a lot of attention. In this area, the focus is on converting CO 2 and reforming hydrocarbons, with the goal of developing an efficient single-step ‘gas-to-liquid’ (GTL) process. Here we show that applying tri-reforming principles to plasma—further called ‘plasma-based multi-reforming’—allows us to better control the plasma chemistry and thus the formed products. To demonstrate this, we used chemical kinetics calculations supported by experiments and reveal that better control of the plasma chemistry can be achieved by adding O 2 or H 2 O to a mixture containing CH 4 and CO 2 (diluted in N 2 ). Moreover, by adding O 2 and H 2 O simultaneously, we can tune the plasma chemistry even further, improving the conversions, thermal efficiency and methanol yield. Unlike thermocatalytic reforming, plasma-based reforming is capable of producing methanol in a single step; and compared with traditional plasma-based dry reforming, plasma-based multi-reforming increases the methanol yield by more than seven times and the thermal efficiency by 49%, as revealed by our model calculations. Thus, we believe that by using plasma-based multi-reforming, ‘gas-to-liquid’ conversion may be made efficient and scalable. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000448589200005 |
Publication Date |
2018-10-23 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2045-2322 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.259 |
Times cited |
|
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge financial support from the Competitive Research Funding from King Abdullah University of Science and Technology (KAUST), the European Marie Skłodowska-Curie Individual Fellowship “GlidArc” within Horizon2020 (Grant No. 657304), the Fund for Scientific Research Flanders (FWO) (grant nos G.0217.14 N, G.0254.14 N and G.0383.16 N) and the IAP/7 (Inter-university Attraction Pole) program ‘PSI-Physical Chemistry of Plasma-Surface Interactions’, financially supported by the Belgian Federal Office for Science Policy (BELSPO). This work was carried out, in part, using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI) and the University of Antwerp. |
Approved |
Most recent IF: 4.259 |
| |
Call Number |
PLASMANT @ plasmant @c:irua:154868 |
Serial |
5066 |
| Permanent link to this record |
| |
|
| |
|
Author |
de Jong, M.; Sleegers, N.; Schram, J.; Daems, D.; Florea, A.; De Wael, K. |
| |
Title |
A Benzocaine‐Induced Local Near‐Surface pH Effect: Influence on the Accuracy of Voltammetric Cocaine Detection |
Type |
A1 Journal article |
| |
Year |
2020 |
Publication |
Analysis & Sensing |
Abbreviated Journal |
Anal. Sens. |
| |
Volume |
|
Issue |
|
Pages |
anse.202000012 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
| |
Abstract |
This work reports on a local induced near-surface pH effect (pHS), due to the presence of one analyte, leading to an influence or even suppression of redox signals of a second analyte present in solution. This concept and its impact on voltammetric sensing is illustrated by focusing on the detection of cocaine in the presence of the common adulterant benzocaine. An in-depth study on the occurring interference mechanism and why it occurs for benzocaine specifically and not for other adulterants was performed through the use of multiple electrochemical strategies. It was concluded that the potential shift and loss of intensity of the squarewave voltammetric cocaine signal in the presence of benzocaine was caused by a local pHS effect. A cathodic pretreatment strategy was developed to nonetheless allow accurate cocaine detection. The gathered insights are useful to explain unidentified phenomena involving compounds with properties similar to benzocaine in voltammetric electroanalysis. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
|
Publication Date |
2020-10-20 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2629-2742 |
ISBN |
|
Additional Links |
UA library record |
| |
Impact Factor |
|
Times cited |
|
Open Access |
|
| |
Notes |
The authors acknowledge financial support from IOF-SBO/POC (UAntwerp), the Fund for Scientific Research (FWO) Flanders, Grant 1S 37658 17N and Grant 1SB 8120N, and VLAIO IM [HBC.2019.2181]. |
Approved |
Most recent IF: NA |
| |
Call Number |
AXES @ axes @c:irua:173031 |
Serial |
6427 |
| Permanent link to this record |
| |
|
| |
|
Author |
Zanaga, D.; Altantzis, T.; Polavarapu, L.; Liz-Marzán, L.M.; Freitag, B.; Bals, S. |
| |
Title |
A New Method for Quantitative XEDS Tomography of Complex Heteronanostructures |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Particle and particle systems characterization |
Abbreviated Journal |
Part Part Syst Char |
| |
Volume |
33 |
Issue |
33 |
Pages |
396-403 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Reliable quantification of 3D results obtained by X-ray Energy Dispersive Spectroscopy (XEDS) tomography is currently hampered by the presence of shadowing effects and poor spatial resolution. Here, we present a method that overcomes these problems by synergistically combining quantified XEDS data and High Angle Annular Dark Field – Scanning Transmission Electron Microscopy (HAADF-STEM) tomography. As a proof of principle, the approach is applied to characterize a complex Au/Ag nanorattle obtained through a galvanic replacement reaction. However, the technique we propose here is widely applicable to a broad range of nanostructures. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000379970000008 |
Publication Date |
2016-03-31 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0934-0866 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.474 |
Times cited |
29 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge financial support from European Research Council (ERC Starting Grant # 335078-COLOURATOMS, ERC Advanced Grant # 291667 HierarSACol and ERC Advanced Grant 267867 – PLASMAQUO), the European Union under the FP7 (Integrated Infrastructure Initiative N. 262348 European Soft Matter Infrastructure, ESMI and N. 312483 ESTEEM2).; esteem2jra4; ECASSara; (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:cannot); |
Approved |
Most recent IF: 4.474 |
| |
Call Number |
c:irua:132643 c:irua:132643 |
Serial |
4052 |
| Permanent link to this record |
| |
|
| |
|
Author |
Zanaga, D.; Bleichrodt, F.; Altantzis, T.; Winckelmans, N.; Palenstijn, W.J.; Sijbers, J.; de Nijs, B.; van Huis, M.A.; Sanchez-Iglesias, A.; Liz-Marzan, L.M.; van Blaaderen, A.; Joost Batenburg, K.; Bals, S.; Van Tendeloo, G. |
| |
Title |
Quantitative 3D analysis of huge nanoparticle assemblies |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Nanoscale |
Abbreviated Journal |
Nanoscale |
| |
Volume |
8 |
Issue |
8 |
Pages |
292-299 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Vision lab |
| |
Abstract |
Nanoparticle assemblies can be investigated in 3 dimensions using electron tomography. However, it is not straightforward to obtain quantitative information such as the number of particles or their relative position. This becomes particularly difficult when the number of particles increases. We propose a novel approach in which prior information on the shape of the individual particles is exploited. It improves the quality of the reconstruction of these complex assemblies significantly. Moreover, this quantitative Sparse Sphere Reconstruction approach yields directly the number of particles and their position as an output of the reconstruction technique, enabling a detailed 3D analysis of assemblies with as many as 10 000 particles. The approach can also be used to reconstruct objects based on a very limited number of projections, which opens up possibilities to investigate beam sensitive assemblies where previous reconstructions with the available electron tomography techniques failed. |
| |
Address |
EMAT, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp, Belgium. sara.bals@uantwerpen.be |
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
English |
Wos |
000366911700028 |
Publication Date |
2015-11-19 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2040-3364 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
7.367 |
Times cited |
34 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge financial support from European Research Council (ERC Starting Grant # 335078-COLOURATOMS, ERC Advanced Grant # 291667 HierarSACol and ERC Advanced Grant 267867 – PLASMAQUO), the European Union under the FP7 (Integrated Infrastructure Initiative N. 262348 European Soft Matter Infrastructure, ESMI and N. 312483 ESTEEM2), and from the Netherlands Organisation for Scientific Research (NWO), project number 639.072.005 and NWO CW 700.57.026. Networking support was provided by COST Action MP1207.; esteem2jra4; ECASSara; (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:cannot); |
Approved |
Most recent IF: 7.367 |
| |
Call Number |
c:irua:131062 c:irua:131062 |
Serial |
3979 |
| Permanent link to this record |
| |
|
| |
|
Author |
Van Everbroeck, T.; Wu, J.; Arenas-Esteban, D.; Ciocarlan, R.-G.; Mertens, M.; Bals, S.; Dujardin, C.; Granger, P.; Seftel, E.M.; Cool, P. |
| |
Title |
ZnAl layered double hydroxide based catalysts (with Cu, Mn, Ti) used as noble metal-free three-way catalysts |
Type |
A1 Journal article |
| |
Year |
2022 |
Publication |
Applied clay science |
Abbreviated Journal |
Appl Clay Sci |
| |
Volume |
217 |
Issue |
|
Pages |
106390 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA) |
| |
Abstract |
|
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000795870100004 |
Publication Date |
2022-01-02 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0169-1317 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
5.6 |
Times cited |
6 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge financial support by theEuropean Union’s Horizon 2020 Project Partial-PGMs (H2020-NMP-686086). R-G C. and P.C. acknowledge the FWO-Flanders (project no. G038215N) for financial support. S⋅B and D.A.E thank the financial support of the European Research Council (ERC-CoG-2019 815128). The authors are grateful to Johnson Matthey, UK, for supplying the commercial benchmark catalysts; realnano; sygmaSB |
Approved |
Most recent IF: 5.6 |
| |
Call Number |
EMAT @ emat @c:irua:186956 |
Serial |
6955 |
| Permanent link to this record |
| |
|
| |
|
Author |
Mosquera, J.; Wang, D.; Bals, S.; Liz-Marzan, L.M. |
| |
Title |
Surfactant layers on gold nanorods |
Type |
A1 Journal article |
| |
Year |
2023 |
Publication |
Accounts of chemical research |
Abbreviated Journal |
|
| |
Volume |
56 |
Issue |
10 |
Pages |
1204-1212 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Gold nanorods (Au NRs) are an exceptionally promising tool in nanotechnology due to three key factors: (i) their strong interaction with electromagnetic radiation, stemming from their plasmonic nature, (ii) the ease with which the resonance frequency of their longitudinal plasmon mode can be tuned from the visible to the near-infrared region of the electromagnetic spect r u m based on their aspect ratio, and (iii) their simple and cost-effective preparation through seed-mediated chemical growth. In this synthetic method, surfactants play a critical role in controlling the size, shape, and colloidal stabi l i t y of Au NRs. For example, surfactants can stabilize specific crystallographic facets during the formation of Au NRs, leading to t h e formation of NRs with specific morphologies. The process of surfactant adsorption onto the NR surface may result in various assemblies of surfactant molecules, such as spherical micelles, elongated micelles, or bilayers. Again, the assembly mode is critical toward determining the further availabi l i t y of the Au NR surface to the surrounding medium. Despite its importance and a great deal of research effort, the interaction between Au NPs and surfactants remains insufficiently understood, because the assembly process is influenced by numerous factors, including the chemical nature of the surfactant, the surface morphology of Au NPs, and solution parameters. Therefore, gaining a more comprehensive understanding of these interactions is essential to unlock the full potential of the seed-mediated growth method and the applications of plasmonic NPs. A plethora of characterization techniques have been applied to reach such an understanding , but many open questions remain. In this Account, we review the current knowledge on the interactions between surfactants and Au NRs. We briefly introduce the state-of-the-art methods for synthesizing Au NRs and highlight the crucial role of cationic surfactants during this process. The self-assembly and organization of surfactants on the Au NR surface is then discussed to better understand their role in seed-mediated growth. Subsequently, we provide examples and elucidate how chemical additives can be used to modulate micellar assemblies, in turn allowing for a finer control over the growth of Au NRs, including chiral NRs. Next, we review the main experimental characterization and computational modeling techniques that have been applied to shed light on the arrangement of surfactants on Au NRs and summarize the advantages and disadvantages for each technique. The Account ends with a “Conclusions and Outlook” section, outlining promising future research directions and developments that we consider are sti l l required, mostly related to the application of electron microscopy in liquid and in 3D. Finally, we remark on the potential of exploiting machine learning techniques to predict synthetic routes for NPs with predefined structures and properties. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000986447000001 |
Publication Date |
2023-05-08 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0001-4842 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
18.3 |
Times cited |
8 |
Open Access |
OpenAccess |
| |
Notes |
The authors acknowledge financial support by the European Research Council (ERC CoG No. 815128 REALNANO to S.B.; ERC AdG No. 787510, 4DbioSERS to L.M.L.-M.) , from MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future” (Grant PID2020-117779RB-I00 to L.M.L.-M. and Grants RYC2019-027842-I , PID2020-117885GA-I00 to J.M.) , and by Guangdong Provincial Key Laboratory of Optical Information Materials and Technology (No. 2017B030301007) , National Center for International Research on Green Optoelectronics (No. 2016B01018) , MOE Interna-tional Laboratory for Optical Information Technologies, and the 111 projects. |
Approved |
Most recent IF: 18.3; 2023 IF: 20.268 |
| |
Call Number |
UA @ admin @ c:irua:196768 |
Serial |
8940 |
| Permanent link to this record |
| |
|
| |
|
Author |
Vlasov, E.; Heyvaert, W.; Ni, B.; Van Gordon, K.; Girod, R.; Verbeeck, J.; Liz-Marzán, L.M.; Bals, S. |
| |
Title |
High-Throughput Morphological Chirality Quantification of Twisted and Wrinkled Gold Nanorods |
Type |
A1 Journal Article |
| |
Year |
2024 |
Publication |
ACS Nano |
Abbreviated Journal |
ACS Nano |
| |
Volume |
|
Issue |
|
Pages |
|
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
Chirality in gold nanostructures offers an exciting opportunity to tune their differential optical response to left- and right-handed circularly polarized light, as well as their interactions with biomolecules and living matter. However, tuning and understanding such interactions demands quantification of the structural features that are responsible for the chiral behavior. Electron tomography (ET) enables structural characterization at the single-particle level and has been used to quantify the helicity of complex chiral nanorods. However, the technique is time-consuming and consequently lacks statistical value. To address this issue, we introduce herein a high-throughput methodology that combines images acquired by secondary electron-based electron beam-induced current (SEEBIC) with quantitative image analysis. As a result, the geometric chirality of hundreds of nanoparticles can be quantified in less than 1 h. When combining the drastic gain in data collection efficiency of SEEBIC with a limited number of ET data sets, a better understanding of how the chiral structure of individual chiral nanoparticles translates into the ensemble chiroptical response can be reached. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
|
Publication Date |
2024-04-26 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1936-0851 |
ISBN |
|
Additional Links |
|
| |
Impact Factor |
17.1 |
Times cited |
|
Open Access |
|
| |
Notes |
The authors acknowledge financial support by the European Research Council (ERC CoG No. 815128 REALNANO to S.B.) and from MCIN/AEI/10.13039/501100011033 (Grant PID2020-117779RB-I00 to L.M.L.-M and FPI Fellowship PRE2021-097588 to K.V.G.). Funded by the European Union under Project 101131111 − DELIGHT, JV acknowledges the eBEAM project supported by the European Union’s Horizon 2020 research and innovation program FETPROACT-EIC-07- 2020: emerging paradigms and communities. |
Approved |
Most recent IF: 17.1; 2024 IF: 13.942 |
| |
Call Number |
EMAT @ emat @ |
Serial |
9121 |
| Permanent link to this record |
| |
|
| |
|
Author |
Paul, M.; Kufer, D.; Müller, A.; Brück, S.; Goering, E.; Kamp, M.; Verbeeck, J.; Tian, H.; Van Tendeloo, G.; Ingle, N.J.C.; Sing, M.; Claessen, R. |
| |
Title |
Fe3O4/ZnO : a high-quality magnetic oxide-semiconductor heterostructure by reactive deposition |
Type |
A1 Journal article |
| |
Year |
2011 |
Publication |
Applied physics letters |
Abbreviated Journal |
Appl Phys Lett |
| |
Volume |
98 |
Issue |
1 |
Pages |
012512,1-012512,3 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
We demonstrate the epitaxial growth of Fe<sub>3</sub>O<sub>4</sub> films on ZnO by a simple reactive deposition procedure using molecular oxygen as an oxidizing agent. X-ray photoelectron spectroscopy results evidence that the iron-oxide surface is nearly stoichiometric magnetite. X-ray diffraction results indicate monocrystalline epitaxy and almost complete structural relaxation. Scanning transmission electron micrographs reveal that the microstructure consists of domains which are separated by antiphase boundaries or twin boundaries. The magnetite films show rather slow magnetization behavior in comparison with bulk crystals probably due to reduced magnetization at antiphase boundaries in small applied fields. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
American Institute of Physics |
Place of Publication |
New York, N.Y. |
Editor |
|
| |
Language |
|
Wos |
000286009800055 |
Publication Date |
2011-01-07 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0003-6951; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
3.411 |
Times cited |
27 |
Open Access |
|
| |
Notes |
The authors acknowledge financial support by DFG through Forschergruppe FOR 1162. |
Approved |
Most recent IF: 3.411; 2011 IF: 3.844 |
| |
Call Number |
UA @ lucian @ c:irua:88653 |
Serial |
3532 |
| Permanent link to this record |
