| |
Records |
|
Author |
Kara De Maeijer, P.; Craeye, B.; Snellings, R.; Kazemi-Kamyab, H.; Loots, M.; Janssens, K.; Nuyts, G. |
| |
Title |
Effect of ultra-fine fly ash on concrete performance and durability |
Type |
A1 Journal article |
| |
Year |
2020 |
Publication |
Construction And Building Materials |
Abbreviated Journal |
Constr Build Mater |
| |
Volume |
263 |
Issue |
|
Pages |
120493-13 |
| |
Keywords  |
A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation); Energy and Materials in Infrastructure and Buildings (EMIB) |
| |
Abstract |
In the present study ultra-fine fly ash as a novel by-product obtained by a dry and closed separation process was investigated as cement replacement in concrete. The impact of ultra-fine fly ash on material properties was investigated following an upscaling as an approach considering paste, mortar and concrete properties. Two types of cement, Portland cement (CEMI) and slag cement (CEMIII), two types of ultra-fly ashes, one with particle size d90< 9.3lm (FA1) and second with d90< 4.6lm (FA2) were used.At paste- and mortar- level, cement was replaced at 0%, 15%, 25%, 35% and 50% with FA1 and FA2. At concrete- level, cement was replaced at 0%, 15% and 25% with different ratios of FA1 and FA2. The results at paste- and mortar- level showed that an increased fineness of the fly ash (FA2) contributes to better workability of the mix. For CEMI, the compressive strength of concrete with FA2 at 25% cement replacement was already equal to the reference 0% replacement concrete at the age of 28 days. For CEMIII, the compressive strength of concrete mix with FA1 with 15% and FA2 with 25% cement replacements reached the reference concrete value at the age of 91 days. Regarding the durability, replacing cement with ultra-fine fly ash (FA2) had a positive influence on the resistivity, chloride migration coefficient and alkali-silica reaction (ASR), and a negative influence on the carbonation resistance. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000582567100093 |
Publication Date |
2020-10-13 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0950-0618 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
7.4 |
Times cited |
|
Open Access |
|
| |
Notes |
|
Approved |
Most recent IF: 7.4; 2020 IF: 3.169 |
| |
Call Number |
UA @ admin @ c:irua:171815 |
Serial |
6498 |
| Permanent link to this record |
| |
|
| |
|
Author |
Janssens, K.; Vekemans, B.; Adams, F.; van Espen, P.; Mutsaers, P. |
| |
Title |
Accurate evaluation of \mu-PIXE and \mu-XRF spectral data through iterative least squares fitting |
Type |
A1 Journal article |
| |
Year |
1996 |
Publication |
Nuclear instruments and methods in physics research: B: beam interactions with materials and atoms
T2 – 7th International Conference on Particle Induced X-ray Emission and Its Analytical Applications, MAY 26-30, 1995, Abano Terme, Italy |
Abbreviated Journal |
7th International Conference on Particle Induced X-ray Emission and Its Analytical Applications, MAY |
| |
Volume |
109 |
Issue |
|
Pages |
179-185 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation); Chemometrics (Mitac 3) |
| |
Abstract |
The integration of the nonlinear least squares X-ray spectrum evaluation progam AXIL. into a mu-PIXE and a mu-XRF setup is discussed. The use of the software when procesing data sets derived from biological and geological samples is described. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
A1996UV44400035 |
Publication Date |
2002-07-25 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0168-583x |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
|
Times cited |
|
Open Access |
|
| |
Notes |
|
Approved |
no |
| |
Call Number |
UA @ admin @ c:irua:95887 |
Serial |
5457 |
| Permanent link to this record |
| |
|
| |
|
Author |
Parrilla, M.; De Wael, K. |
| |
Title |
Wearable self‐powered electrochemical devices for continuous health management |
Type |
A1 Journal article |
| |
Year |
2021 |
Publication |
Advanced Functional Materials |
Abbreviated Journal |
Adv Funct Mater |
| |
Volume |
31 |
Issue |
50 |
Pages |
2107042 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation); Antwerp Electrochemical and Analytical Sciences Lab (A-Sense Lab) |
| |
Abstract |
The wearable revolution is already present in society through numerous gadgets. However, the contest remains in fully deployable wearable (bio)chemical sensing. Its use is constrained by the energy consumption which is provided by miniaturized batteries, limiting the autonomy of the device. Hence, the combination of materials and engineering efforts to develop sustainable energy management is paramount in the next generation of wearable self-powered electrochemical devices (WeSPEDs). In this direction, this review highlights for the first time the incorporation of innovative energy harvesting technologies with top-notch wearable self-powered sensors and low-powered electrochemical sensors toward battery-free and self-sustainable devices for health and wellbeing management. First, current elements such as wearable designs, electrochemical sensors, energy harvesters and storage, and user interfaces that conform WeSPEDs are depicted. Importantly, the bottlenecks in the development of WeSPEDs from an analytical perspective, product side, and power needs are carefully addressed. Subsequently, energy harvesting opportunities to power wearable electrochemical sensors are discussed. Finally, key findings that will enable the next generation of wearable devices are proposed. Overall, this review aims to bring new strategies for an energy-balanced deployment of WeSPEDs for successful monitoring of (bio)chemical parameters of the body toward personalized, predictive, and importantly, preventive healthcare. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000694642500001 |
Publication Date |
2021-09-09 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1616-301x |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
12.124 |
Times cited |
|
Open Access |
OpenAccess |
| |
Notes |
|
Approved |
Most recent IF: 12.124 |
| |
Call Number |
UA @ admin @ c:irua:181306 |
Serial |
8750 |
| Permanent link to this record |
| |
|
| |
|
Author |
't Hart, L.; Storme, P.; Anaf, W.; Nuyts, G.; Vanmeert, F.; Dorriné, W.; Janssens, K.; De Wael, K.; Schalm, O. |
| |
Title |
Monitoring the impact of the indoor air quality on silver cultural heritage objects using passive and continuous corrosion rate assessments |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Applied physics A : materials science & processing |
Abbreviated Journal |
Appl Phys A-Mater |
| |
Volume |
122 |
Issue |
10 |
Pages |
923-10 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation); Antwerp Cultural Heritage Sciences (ARCHES) |
| |
Abstract |
There is a long tradition in evaluating industrial atmospheres by measuring the corrosion rate of exposed metal coupons. The heritage community also uses this method, but the interpretation of the corrosion rate often lacks clarity due to the low corrosivity in indoor museum environments. This investigation explores the possibilities and drawbacks of different silver corrosion rate assessments. The corrosion rate is determined by three approaches: (1) chemical characterization of metal coupons using analytical techniques such as electrochemical measurements, SEM-EDX, XRD, and µ-Raman spectroscopy, (2) continuous corrosion monitoring methods based on electrical resistivity loss of a corroding nm-sized metal wire and weight gain of a corroding silver coated quartz crystal, and (3) characterization of the visual degradation of the metal coupons. This study confirms that subtle differences in corrosivity between locations inside a museum can be determined on condition that the same corrosion rate assessment is used. However, the impact of the coupon orientation with respect to the prevailing direction of air circulation can be substantially larger than the impact of the coupon location. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000384753800053 |
Publication Date |
2016-09-28 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0947-8396 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
1.455 |
Times cited |
3 |
Open Access |
|
| |
Notes |
; This research has been sponsored by the Belgian Federal Public Planning Service Science Policy (BELSPO) under Project Number BR/132/A6/AIRCHECQ. In this project an innovative monitoring kit is developed that continuously and simultaneously measures both environmental parameters and material behaviour, enabling the study of the cause-effect relationships. The Quanta 250 FEG microscope at the University of Antwerp was funded by the Hercules foundation of the Flemish Government. ; |
Approved |
Most recent IF: 1.455 |
| |
Call Number |
UA @ admin @ c:irua:135511 |
Serial |
5733 |
| Permanent link to this record |
| |
|
| |
|
Author |
Proost, K.; Janssens, K.; Wagner, B.; Bulska, E.; Schreiner, M. |
| |
Title |
Determination of localized Fe2+/Fe3+ ratios in inks of historic documents by means of \mu-XANES |
Type |
A1 Journal article |
| |
Year |
2004 |
Publication |
Nuclear instruments and methods in physics research: B: beam interactions with materials and atoms |
Abbreviated Journal |
Nucl Instrum Meth B |
| |
Volume |
213 |
Issue |
|
Pages |
723-728 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
| |
Abstract |
An important part of the European cultural heritage is composed of hand-written documents. Many of these documents were drawn up with iron-gall ink. This type of ink present a serious conservation problem, as it slowly oxidizes ('burns') the paper it is written on, thereby gradually disintegrating the historic document. Acid hydrolysis of the cellulose and/or the oxidation of organic compounds promoted by radical intermediates that are formed due to the presence of Fe2+ ions are considered to be the cause of the disintegration. mu-XANES measurements were performed with a lateral resolution of 30-50 mum in order to determine the local Fe2+/Fe3+ ratio in 19th C. documents from the Austrian National Archives and fragments of 16th C documents from the Polish National Library. In the 19th C documents, no significant amount of Fe2+ was detected. On the other hand, in the 16th C fragments, significant amounts of Fe2+ and appreciable differences in distribution of Fe2+ and Fe3+ within individual letters/ink stains were observed. (C) 2003 Elsevier B.V. All rights reserved. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000187020700144 |
Publication Date |
2003-06-30 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0168-583x |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
1.109 |
Times cited |
|
Open Access |
|
| |
Notes |
|
Approved |
Most recent IF: 1.109; 2004 IF: 0.997 |
| |
Call Number |
UA @ admin @ c:irua:45378 |
Serial |
5573 |
| Permanent link to this record |
| |
|
| |
|
Author |
Pei, Z.-G.; Shan, X.-Q.; Zhang, S.-Z.; Kong, J.-J.; Wen, B.; Zhang, J.; Zheng, L.-R.; Xie, Y.-N.; Janssens, K. |
| |
Title |
Insight to ternary complexes of co-adsorption of norfloxacin and Cu(II) onto montmorillonite at different pH using EXAFS |
Type |
A1 Journal article |
| |
Year |
2011 |
Publication |
Journal of hazardous materials |
Abbreviated Journal |
J Hazard Mater |
| |
Volume |
186 |
Issue |
1 |
Pages |
842-848 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
| |
Abstract |
Co-adsorption of norfloxacin (Nor) and Cu(II) on montmorillonite at pH 4.5, 7.0 and 9.0 was studied by integrated batch adsorption experiments and extended X-ray absorption fine structure (EXAFS) spectroscopy. Under such pH conditions the dominant species of Nor are cation (Nor+), zwitterion (Nor±), and anion (Nor−), respectively. Results indicated that Nor sorption decreased with an increase of solution pH. The presence of Cu(II) slightly suppressed the Nor+ sorption at pH 4.5, while increased Nor± and Nor−sorption on montmorillonite at pH 7.0 and 9.0, respectively. In contrast, Nor increased Cu(II) adsorption at pH 4.5, but had little effect on the adsorption of Cu(II) on montmorillonite at pH 7.0 and 9.0. Spectroscopic results showed that, at pH 4.5, Nor+ was sorbed on montmorillonite by the formation of outer-sphere montmorilloniteNorCu(II) ternary surface complex. At pH 7.0, montmorilloniteNorCu(II) and montmorilloniteCu(II)Nor ternary surface complexes co-exist. At pH 9.0, montmorilloniteCu(II)Nor ternary surface complex was likely formed, which was different to Cu(II)(Nor)2 precipitate of the solution. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000288102400107 |
Publication Date |
2010-11-26 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0304-3894 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
6.065 |
Times cited |
25 |
Open Access |
|
| |
Notes |
; This work was funded by the National Natural Science Foundation of China (grant numbers: 41071308, 20707037, 20737003 and 20877087) and the Youth Fund of State Key Laboratory of Environmental Chemistry and Ecotoxicology QN2009-07. ; |
Approved |
Most recent IF: 6.065; 2011 IF: 4.173 |
| |
Call Number |
UA @ admin @ c:irua:88786 |
Serial |
5664 |
| Permanent link to this record |
| |
|
| |
|
Author |
Celik, N.; Čevik, U.; Celik, A.; Koz, B. |
| |
Title |
Natural and artificial radioactivity measurements in Eastern Black Sea region of Turkey |
Type |
A1 Journal article |
| |
Year |
2009 |
Publication |
Journal of hazardous materials |
Abbreviated Journal |
|
| |
Volume |
162 |
Issue |
1 |
Pages |
146-153 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
| |
Abstract |
In the present work, naturally occurring radionuclides of (226)Ra, (232)Th and (40)K were measured in soil samples collected from the Eastern Black Sea region of Turkey. It was found that the activity concentrations ranged from 12 to 120 Bq kg(-1) for (226)Ra, from 13 to 121 Bq kg(-1) for (232)Th and from 204 to 1295 Bq kg(-1) for (40)K. Besides naturally occurring radionuclides, (137)Cs activity concentration was measured in soil, lichen and moss samples and it was found that (137)Cs activity concentration ranged from 27 to 775 Bq kg(-1) with for soil, from 29 to 879 Bq kg(-1) for lichen and from 67 to 1396 Bq kg(-1) for moss samples. Annual effective doses due to the naturally occurring radionuclides and (137)CS were estimated. Ecological half-lives of (137)CS in lichen and moss species were estimated. The decrease of the activity concentrations in the present measurements (2007) relative to those in 1993 indicated ecological half-lives between 1.36 and 2.96 years for lichen and between 1.35 and 2.85 years for moss species. (C) 2008 Elsevier B.V. All rights reserved. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000263149400019 |
Publication Date |
2008-05-10 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0304-3894 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
|
Times cited |
|
Open Access |
|
| |
Notes |
|
Approved |
no |
| |
Call Number |
UA @ admin @ c:irua:94562 |
Serial |
8296 |
| Permanent link to this record |
| |
|
| |
|
Author |
Safdar, M.; Khan, S.U.; Jänis, J. |
| |
Title |
Progress toward catalytic micro- and nanomotors for biomedical and environmental applications |
Type |
A1 Journal article |
| |
Year |
2018 |
Publication |
Advanced Materials |
Abbreviated Journal |
|
| |
Volume |
30 |
Issue |
24 |
Pages |
1703660 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
| |
Abstract |
Synthetic micro‐ and nanomotors (MNMs) are tiny objects that can autonomously move under the influence of an appropriate source of energy, such as a chemical fuel, magnetic field, ultrasound, or light. Chemically driven MNMs are composed of or contain certain reactive material(s) that convert chemical energy of a fuel into kinetic energy (motion) of the particles. Several different materials have been explored over the last decade for the preparation of a wide variety of MNMs. Here, the discovery of materials and approaches to enhance the efficiency of chemically driven MNMs are reviewed. Several prominent applications of the MNMs, especially in the fields of biomedicine and environmental science, are also discussed, as well as the limitations of existing materials and future research directions. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000436455800006 |
Publication Date |
2018-02-07 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
|
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
|
Times cited |
|
Open Access |
|
| |
Notes |
|
Approved |
no |
| |
Call Number |
UA @ admin @ c:irua:175426 |
Serial |
8424 |
| Permanent link to this record |
| |
|
| |
|
Author |
Piñera, I.; Cruz, C.M.; van Espen, P.; Abreu, Y.; Leyva, A. |
| |
Title |
Study of dpa distributions in electron irradiated YBCO slabs through MCCM algorithm |
Type |
A1 Journal article |
| |
Year |
2012 |
Publication |
Nuclear instruments and methods in physics research: B: beam interactions with materials and atoms |
Abbreviated Journal |
|
| |
Volume |
274 |
Issue |
|
Pages |
191-194 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
| |
Abstract |
The Monte Carlo assisted Classical Method (MCCM) consists on a calculation procedure for determining the displacements per atom (dpa) distribution in solid materials. This algorithm allows studying the gamma and electron irradiation damage in different materials. It is based on the electrons elastic scattering classic theories and the use of Monte Carlo simulation for the physical processes involved. The present study deals with the Monte Carlo simulation of electron irradiation effects on YBa2Cu3O7-x (YBCO) slabs using the MCNPX code system. Displacements per atom distributions are obtained through the MCCM for electron irradiation up to 10 MeV. In-depth dpa profiles for electrons and positrons are obtained and analysed. Also, dpa contributions from each atomic specie in the material are calculated. It was found that the dpa distribution is more homogeneous in the material volume when increasing energy of incident electrons. Also, the dpa produced by positrons has no relevance when irradiating with electrons, in contrast with previous similar gamma irradiation studies. All the results are presented and discussed in this contribution. (C) 2011 Elsevier B.V. All rights reserved. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000301611900031 |
Publication Date |
2011-12-05 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0168-583x |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
|
Times cited |
|
Open Access |
|
| |
Notes |
|
Approved |
no |
| |
Call Number |
UA @ admin @ c:irua:97819 |
Serial |
8595 |
| Permanent link to this record |
| |
|
| |
|
Author |
Monico, L.; d'Acapito, F.; Cotte, M.; Janssens, K.; Romani, A.; Ricci, G.; Miliani, C.; Cartechini, L. |
| |
Title |
Total electron yield (TEY) detection mode Cr K-edge XANES spectroscopy as a direct method to probe the composition of the surface of darkened chrome yellow (PbCr1-xSxO4) and potassium chromate paints |
Type |
A1 Journal article |
| |
Year |
2023 |
Publication |
Nuclear instruments and methods in physics research: B: beam interactions with materials and atoms |
Abbreviated Journal |
|
| |
Volume |
539 |
Issue |
|
Pages |
141-147 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Antwerp X-ray Imaging and Spectroscopy (AXIS) |
| |
Abstract |
The darkening of chromate-pigments, including chrome yellows (PbCr1-xSxO4), is a surface phenomenon affecting late 19th-early 20th c. paintings, such as those by Van Gogh. Exploring analytical strategies that contribute to a deep understanding of darkening is therefore significant for the long-term conservation of unique masterpieces. Here, we examined the capabilities of Cr K-edge XANES spectroscopy collected at the same time in X-ray fluorescence yield (XFY) and total electron yield (TEY) detection modes to selectively study the surface composition of darkened oil paint mock-ups composed of chrome yellow (PbCr0.2S0.8O4) or potassium chromate. By discussing advantages and drawbacks in using XFY/TEY modes in relation to XFY & mu;-XANES analysis from sectioned samples, we aim at assessing if TEY-XANES spectroscopy: (i) is a selective surface method to determine the abundance of different Cr-species from paint fragments; (ii) can contribute to optimize the analytical strategy by limiting time consuming sample preparation procedures; (iii) can decrease the probability of radiation damage. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
001041485400001 |
Publication Date |
2023-04-10 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0168-583x |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
1.3 |
Times cited |
|
Open Access |
OpenAccess |
| |
Notes |
|
Approved |
Most recent IF: 1.3; 2023 IF: 1.109 |
| |
Call Number |
UA @ admin @ c:irua:198427 |
Serial |
8944 |
| Permanent link to this record |
| |
|
| |
|
Author |
Drăgan, A.-M.; Feier, B.G.; Tertis, M.; Bodoki, E.; Truta, F.; Stefan, M.-G.; Kiss, B.; Van Durme, F.; De Wael, K.; Oprean, R.; Cristea, C. |
| |
Title |
Forensic analysis of synthetic cathinones on nanomaterials-based platforms : chemometric-assisted voltametric and UPLC-MS/MS investigation |
Type |
A1 Journal article |
| |
Year |
2023 |
Publication |
Nanomaterials |
Abbreviated Journal |
|
| |
Volume |
13 |
Issue |
17 |
Pages |
2393-19 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Antwerp Electrochemical and Analytical Sciences Lab (A-Sense Lab) |
| |
Abstract |
Synthetic cathinones (SCs) are a group of new psychoactive substances often referred to as “legal highs” or “bath salts”, being characterized by a dynamic change, new compounds continuously emerging on the market. This creates a lack of fast screening tests, making SCs a constant concern for law enforcement agencies. Herein, we present a fast and simple method for the detection of four SCs (alpha-pyrrolidinovalerophenone, N-ethylhexedrone, 4-chloroethcathinone, and 3-chloromethcathinone) based on their electrochemical profiles in a decentralized manner. In this regard, the voltametric characterization of the SCs was performed by cyclic and square wave voltammetry. The elucidation of the SCs redox pathways was successfully achieved using liquid chromatography coupled to (tandem) mass spectrometry. For the rational identification of the ideal experimental conditions, chemometric data processing was employed, considering two critical qualitative and quantitative variables: the type of the electrochemical platform and the pH of the electrolyte. The analytical figures of merit were determined on standard working solutions using the optimized method, which exhibited wide linear ranges and LODs suitable for confiscated sample screening. Finally, the performance of the method was evaluated on real confiscated samples, the resulting validation parameters being similar to those obtained with another portable device (i.e., Raman spectrometer). |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
001061205100001 |
Publication Date |
2023-08-23 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2079-4991 |
ISBN |
|
Additional Links |
UA library record; WoS full record |
| |
Impact Factor |
5.3 |
Times cited |
|
Open Access |
OpenAccess |
| |
Notes |
|
Approved |
Most recent IF: 5.3; 2023 IF: 3.553 |
| |
Call Number |
UA @ admin @ c:irua:199221 |
Serial |
8869 |
| Permanent link to this record |
| |
|
| |
|
Author |
Peeters, H.; Lenaerts, S.; Verbruggen, S.W. |
| |
Title |
Benchmarking the photocatalytic self-cleaning activity of industrial and experimental materials with ISO 27448:2009 |
Type |
A1 Journal article |
| |
Year |
2023 |
Publication |
Materials |
Abbreviated Journal |
Materials |
| |
Volume |
16 |
Issue |
3 |
Pages |
1119-13 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology |
| |
Abstract |
Various industrial surface materials are tested for their photocatalytic self-cleaning activity by performing the ISO 27448:2009 method. The samples are pre-activated by UV irradiation, fouled with oleic acid and irradiated by UV light. The degradation of oleic acid over time is monitored by taking water contact angle measurements using a contact angle goniometer. The foulant, oleic acid, is an organic acid that makes the surface more hydrophobic. The water contact angle will thus decrease over time as the photocatalytic material degrades the oleic acid. In this study, we argue that the use of this method is strongly limited to specific types of surface materials, i.e., only those that are hydrophilic and smooth in nature. For more hydrophobic materials, the difference in the water contact angles of a clean surface and a fouled surface is not measurable. Therefore, the photocatalytic self-cleaning activity cannot be established experimentally. Another type of material that cannot be tested by this standard are rough surfaces. For rough surfaces, the water contact angle cannot be measured accurately using a contact angle goniometer as prescribed by the standard. Because of these limitations, many potentially interesting industrial substrates cannot be evaluated. Smooth samples that were treated with an in-house developed hydrophilic titania thin film (PCT/EP2018/079983) showed a great photocatalytic self-cleaning performance according to the ISO standard. Apart from discussing the pros and cons of the current ISO standard, we also stress how to carefully interpret the results and suggest alternative testing solutions. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000930734100001 |
Publication Date |
2023-01-30 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1996-1944 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
3.4 |
Times cited |
|
Open Access |
OpenAccess |
| |
Notes |
|
Approved |
Most recent IF: 3.4; 2023 IF: 2.654 |
| |
Call Number |
UA @ admin @ c:irua:193337 |
Serial |
7284 |
| Permanent link to this record |
| |
|
| |
|
Author |
Watson, G.; Kummamuru, N.B.; Verbruggen, S.W.; Perreault, P.; Houlleberghs, M.; Martens, J.; Breynaert, E.; Van Der Voort, P. |
| |
Title |
Engineering of hollow periodic mesoporous organosilica nanorods for augmented hydrogen clathrate formation |
Type |
A1 Journal article |
| |
Year |
2023 |
Publication |
Journal of materials chemistry A : materials for energy and sustainability |
Abbreviated Journal |
|
| |
Volume |
11 |
Issue |
47 |
Pages |
26265-26276 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology |
| |
Abstract |
Hydrogen (H2) storage, in the form of clathrate hydrates, has emerged as an attractive alternative to classical storage methods like compression or liquefaction. Nevertheless, the sluggish enclathration kinetics along with low gas storage capacities in bulk systems is currently impeding the progress of this technology. To this end, unstirred systems coupled with porous materials have been shown to tackle the aforementioned drawbacks. In line with this approach, the present study explores the use of hydrophobic periodic organosilica nanoparticles, later denoted as hollow ring-PMO (HRPMO), for H2 storage as clathrate hydrates under mild operating conditions (5.56 mol% THF, 7 MPa, and 265–273 K). The surface of the HRPMO nanoparticles was carefully decorated/functionalized with THF-like moieties, which are well-known promoter agents in clathrate formation when applied in classical, homogeneous systems. The study showed that, while the non-functionalized HRPMO can facilitate the formation of binary H2-THF clathrates, the incorporation of surface-bound promotor structures enhances this process. More intriguingly, tuning the concentration of these surface-bound promotor agents on the HRPMO led to a notable effect on solid-state H2 storage capacities. An increase of 3% in H2 storage capacity, equivalent to 0.26 wt%, along with a substantial increase of up to 28% in clathrate growth kinetics, was observed when an optimal loading of 0.14 mmol g−1 of promoter agent was integrated into the HRPMO framework. Overall, the findings from this study highlight that such tuning effects in the solid-state have the potential to significantly boost hydrate formation/growth kinetics and H2 storage capacities, thereby opening new avenues for the ongoing development of H2 clathrates in industrial applications. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
001108752600001 |
Publication Date |
2023-11-24 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2050-7488; 2050-7496 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
11.9 |
Times cited |
|
Open Access |
|
| |
Notes |
|
Approved |
Most recent IF: 11.9; 2023 IF: 8.867 |
| |
Call Number |
UA @ admin @ c:irua:201007 |
Serial |
9031 |
| Permanent link to this record |
| |
|
| |
|
Author |
Venturi, F.; Calizzi, M.; Bals, S.; Perkisas, T.; Pasquini, L. |
| |
Title |
Self-assembly of gas-phase synthesized magnesium nanoparticles on room temperature substrates |
Type |
A1 Journal article |
| |
Year |
2015 |
Publication |
Materials research express |
Abbreviated Journal |
Mater Res Express |
| |
Volume |
2 |
Issue |
2 |
Pages |
015007 |
| |
Keywords |
A1 Journal article; Engineering Management (ENM); Electron microscopy for materials research (EMAT) |
| |
Abstract |
Magnesium nanoparticles (NPs) with initial size in the 10-50 nmrange were synthesized by inert gas condensation under helium flow and deposited on room temperature substrates. The morphology and crystal structure of the NPs ensemble were investigated as a function of the deposition time by complementary electron microscopy techniques, including high resolution imaging and chemical mapping. With increasing amount of material, strong coarsening phenomena were observed at room temperature: small NPs disappeared while large faceted NPs developed, leading to a 5-fold increase of the average NPs size within a few minutes. The extent of coarsening and the final morphology depended also on the nature of the substrate. Furthermore, large single-crystal NPs were seen to arise from the self-organization of primary NPs units, providing a mechanism for crystal growth. The dynamics of the self-assembly process involves the basic steps of NPs sticking, diffusion on substrate, coordinated rotation and attachment/coalescence. Key features are the surface energy anisotropy, reflected by the faceted shape of the NPs, and the low melting point of the material. The observed phenomena have strong implications in relation to the synthesis and stability of nanostructures based on Mg or other elements with similar features. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
IOP Publishing |
Place of Publication |
Bristol |
Editor |
|
| |
Language |
|
Wos |
000369978500007 |
Publication Date |
2014-12-31 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2053-1591 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
1.068 |
Times cited |
14 |
Open Access |
Not_Open_Access |
| |
Notes |
; Financial support by COST Action MP1103 'Nanostructured Materials for Solid-State Hydrogen Storage' is gratefully acknowledged. ; |
Approved |
Most recent IF: 1.068; 2015 IF: NA |
| |
Call Number |
UA @ lucian @ c:irua:132275 |
Serial |
4240 |
| Permanent link to this record |
| |
|
| |
|
Author |
Titantah, J.T.; Lamoen, D. |
| |
Title |
Carbon and nitrogen 1s energy levels in amorphous carbon nitride systems: XPS interpretation using first-principles |
Type |
A1 Journal article |
| |
Year |
2007 |
Publication |
Diamond And Related Materials |
Abbreviated Journal |
Diam Relat Mater |
| |
Volume |
16 |
Issue |
3 |
Pages |
581-588 |
| |
Keywords |
A1 Journal article; Electron Microscopy for Materials Science (EMAT); |
| |
Abstract |
|
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
| |
Language |
|
Wos |
000244827100028 |
Publication Date |
2007-01-08 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0925-9635; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
2.561 |
Times cited |
77 |
Open Access |
|
| |
Notes |
|
Approved |
Most recent IF: 2.561; 2007 IF: 1.788 |
| |
Call Number |
UA @ lucian @ c:irua:63842 |
Serial |
277 |
| Permanent link to this record |
| |
|
| |
|
Author |
Fomin, V.M.; Misko, V.R.; Devreese, J.T.; Brongersma, H.H. |
| |
Title |
Comparative analysis of the low-energy He+ ions scattering on Al and Al2O3 surfaces |
Type |
A1 Journal article |
| |
Year |
1998 |
Publication |
Nuclear Instruments & Methods In Physics Research Section B-Beam Interactions With Materials And Atoms |
Abbreviated Journal |
Nucl Instrum Meth B |
| |
Volume |
145 |
Issue |
|
Pages |
545-552 |
| |
Keywords |
A1 Journal article; Electron Microscopy for Materials Science (EMAT); |
| |
Abstract |
|
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000077508800008 |
Publication Date |
2003-04-05 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0168-583X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
1.109 |
Times cited |
9 |
Open Access |
|
| |
Notes |
|
Approved |
Most recent IF: 1.109; 1998 IF: 1.093 |
| |
Call Number |
UA @ lucian @ c:irua:24440 |
Serial |
415 |
| Permanent link to this record |
| |
|
| |
|
Author |
Zhang, F.; Inokoshi, M.; Batuk, M.; Hadermann, J.; Naert, I.; Van Meerbeek, B.; Vleugels, J. |
| |
Title |
Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Dental Materials |
Abbreviated Journal |
Dent Mater |
| |
Volume |
32 |
Issue |
32 |
Pages |
e327-e337 |
| |
Keywords |
A1 Journal article; Electron Microscopy for Materials Science (EMAT); |
| |
Abstract |
OBJECTIVE: The aim was to evaluate the optical properties, mechanical properties and aging stability of yttria-stabilized zirconia with different compositions, highlighting the influence of the alumina addition, Y2O3 content and La2O3 doping on the translucency. METHODS: Five different Y-TZP zirconia powders (3 commercially available and 2 experimentally modified) were sintered under the same conditions and characterized by X-ray diffraction with Rietveld analysis and scanning electron microscopy (SEM). Translucency (n=6/group) was measured with a color meter, allowing to calculate the translucency parameter (TP) and the contrast ratio (CR). Mechanical properties were appraised with four-point bending strength (n=10), single edge V-notched beam (SEVNB) fracture toughness (n=8) and Vickers hardness (n=10). The aging stability was evaluated by measuring the tetragonal to monoclinic transformation (n=3) after accelerated hydrothermal aging in steam at 134 degrees C, and the transformation curves were fitted by the Mehl-Avrami-Johnson (MAJ) equation. Data were analyzed by one-way ANOVA, followed by Tukey's HSD test (alpha=0.05). RESULTS: Lowering the alumina content below 0.25wt.% avoided the formation of alumina particles and therefore increased the translucency of 3Y-TZP ceramics, but the hydrothermal aging stability was reduced. A higher yttria content (5mol%) introduced about 50% cubic zirconia phase and gave rise to the most translucent and aging-resistant Y-TZP ceramics, but the fracture toughness and strength were considerably sacrificed. 0.2mol% La2O3 doping of 3Y-TZP tailored the grain boundary chemistry and significantly improved the aging resistance and translucency. Although the translucency improvement by La2O3 doping was less effective than for introducing a substantial amount of cubic zirconia, this strategy was able to maintain the mechanical properties of typical 3Y-TZP ceramics. SIGNIFICANCE: Three different approaches were compared to improve the translucency of 3Y-TZP ceramics. |
| |
Address |
KU Leuven, Department of Materials Engineering, Kasteelpark Arenberg 44, Belgium |
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
English |
Wos |
000389516400003 |
Publication Date |
2016-10-06 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0109-5641 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.07 |
Times cited |
|
Open Access |
|
| |
Notes |
The authors acknowledge the Research Fund of KU Leu- ven under project 0T/10/052 and the Fund for Scientific Research Flanders (FWO-Vlaanderen) under grant G.0431.10N. F. Zhang thanks the Research Fund of KU Leuven for her post- doctoral fellowship (PDM/15/153). We thank M. Peumans for the translucency measurements. |
Approved |
Most recent IF: 4.07 |
| |
Call Number |
EMAT @ emat @ c:irua:136821 |
Serial |
4313 |
| Permanent link to this record |
| |
|
| |
|
Author |
Schalm, O.; Crabbé, A.; Storme, P.; Wiesinger, R.; Gambirasi, A.; Grieten, E.; Tack, P.; Bauters, S.; Kleber, C.; Favaro, M.; Schryvers, D.; Vincze, L.; Terryn, H.; Patelli, A. |
| |
Title |
The corrosion process of sterling silver exposed to a Na2S solution: monitoring and characterizing the complex surface evolution using a multi-analytical approach |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Applied Physics A-Materials Science & Processing |
Abbreviated Journal |
Appl Phys A-Mater |
| |
Volume |
122 |
Issue |
122 |
Pages |
903 |
| |
Keywords |
A1 Journal article; Electron Microscopy for Materials Science (EMAT); |
| |
Abstract |
Many historical ‘silver’ objects are composed of sterling silver, a silver alloy containing small amounts of copper. Besides the dramatic impact of copper on the corrosion process, the chemical composition of the corrosion layer evolves continuously. The evolution of the surface during the exposure to a Na2S solution was monitored by means of visual observation at macroscopic level, chemical analysis at microscopic level and analysis at the nanoscopic level. The corrosion process starts with the preferential oxidation of copper, forming mixtures of oxides and sulphides while voids are being created beneath the corrosion layer. Only at a later stage, the silver below the corrosion layer is consumed. This results in the formation of jalpaite and at a later stage of acanthite. The acanthite is found inside the corrosion layer at the boundaries of jalpaite grains and as individual grains between the jalpaite grains but also as a thin film on top of the corrosion layer. The corrosion process could be described as a sequence of 5 subsequent surface states with transitions between these states. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000384753800033 |
Publication Date |
2016-09-20 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0947-8396 |
ISBN |
|
Additional Links |
|
| |
Impact Factor |
1.455 |
Times cited |
9 |
Open Access |
|
| |
Notes |
The authors are grateful for the financial support by the EU-FP7 Grant PANNA No. 282998 and for the opportunity to perform SR-XPS measurements at the NanoESCA beamline of the Elettra storage ring, under the approval of the advisory Committee (Proposal No. 20135164), as well as the opportunity to perform XANES measurements at the DUBBLE beamline of the ESRF storage ring (Proposal No. 26-01-990). The authors are grateful for the financial support by the STIMPRO Project FFB150215 of the University of Antwerp. Pieter Tack is funded by a Ph.D. Grant of the Agency for Innovation by Science and Technology (IWT). We would also like to thank Peter Van den Haute for the XRD measurements that were performed at the University of Ghent. |
Approved |
Most recent IF: 1.455 |
| |
Call Number |
EMAT @ emat @ |
Serial |
4331 |
| Permanent link to this record |
| |
|
| |
|
Author |
Colin D. Judge, Nicolas Gauquelin, Lori Walters, Mike Wright, James I. Cole, James Madden, Gianluigi A. Botton, Malcolm Griffiths |
| |
Title |
Intergranular fracture in irradiated Inconel X-750 containing very high concentrations of helium and hydrogen |
Type |
A1 Journal Article |
| |
Year |
2015 |
Publication |
Journal of Nuclear Materials |
Abbreviated Journal |
|
| |
Volume |
457 |
Issue |
457 |
Pages |
165-172 |
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
In recent years, it has been observed that Inconel X-750 spacers in CANDU reactors exhibits lower ductility with reduced load carrying capacity following irradiation in a reactor environment. The fracture behaviour of ex-service material was also found to be entirely intergranular at high doses. The thermalized flux spectrum in a CANDU reactor leads to transmutation of 58Ni to 59Ni. The 59Ni itself has unusually high thermal neutron reaction cross-sections of the type: (n, γ), (n, p), and (n, α). The latter two reactions, in particular, contribute to a significant enhancement of the atomic displacements in addition to creating high concentrations of hydrogen and helium within the material. Microstructural examinations by transmission electron microscopy (TEM) have confirmed the presence of helium bubbles in the matrix and aligned along grain boundaries and matrix–precipitate interfaces. Helium bubble size and density are found to be highly dependent on the irradiation temperature and material microstructure; the bubbles are larger within grain boundary precipitates. TEM specimens extracted from fracture surfaces and crack tips provide information that is consistent with crack propagation along grain boundaries due to the presence of He bubbles. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000349169100022 |
Publication Date |
2014-11-01 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
|
ISBN |
|
Additional Links |
|
| |
Impact Factor |
|
Times cited |
29 |
Open Access |
|
| |
Notes |
|
Approved |
Most recent IF: NA |
| |
Call Number |
EMAT @ emat @ |
Serial |
4540 |
| Permanent link to this record |
| |
|
| |
|
Author |
van der Torren, A.J.H.; Liao, Z.; Xu, C.; Gauquelin, N.; Yin, C.; Aarts, J.; van der Molen, S.J. |
| |
Title |
Formation of a conducting LaAlO3/SrTiO3 interface studied by low-energy electron reflection during growth |
Type |
A1 Journal Article |
| |
Year |
2017 |
Publication |
Physical Review Materials |
Abbreviated Journal |
Phys. Rev. Materials |
| |
Volume |
1 |
Issue |
7 |
Pages |
075001 |
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
The two-dimensional electron gas occurring between the band insulators SrTiO 3 and LaAlO 3 continues to attract considerable interest, due to the possibility of dynamic control over the carrier density, and the ensuing phenomena such as magnetism and superconductivity. The formation of this conducting interface is sensitive to the growth conditions, but despite numerous investigations, there are still questions about the details of the physics involved. In particular, not much is known about the electronic structure of the growing LaAlO 3 layer at the growth temperature (around 800 ◦ C) in oxygen (pressure around 5 × 10 −5 mbar), since analysis techniques at these conditions are not readily available. We developed a pulsed laser deposition system inside a low-energy electron microscope in order to study this issue. The setup allows for layer-by-layer growth control and in-situ measurements of the angle-dependent electron reflection intensity, which can be used as a fingerprint of the electronic structure of the surface layers during growth. By using different substrate terminations and growth conditions we observe two families of reflectivity maps, which we can connect either to samples with an AlO 2 -rich surface and a conducting interface; or to samples with a LaO-rich surface and an insulating interface. Our observations emphasize that substrate termination and stoichiometry determine the electronic structure of the growing layer, and thereby the conductance of the interface. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000418770200003 |
Publication Date |
2017-12-06 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2475-9953 |
ISBN |
|
Additional Links |
|
| |
Impact Factor |
|
Times cited |
2 |
Open Access |
Not_Open_Access |
| |
Notes |
Nederlandse Organisatie voor Wetenschappelijk Onderzoek; Fonds Wetenschappelijk Onderzoek, G.0044.13N ; European Cooperation in Science and Technology, MP 1308 ; We want to acknowledge Ruud Tromp, Daniel Gee- len, Johannes Jobst, Regina Dittmann, Gert Jan Koster, Guus Rijnders and Jo Verbeek for discussions and ad- vice and Ruud van Egmond and Marcel Hesselberth for technical assistance. This work was supported by the Netherlands Organization for Scientific Research (NWO) by means of an ”NWO Groot” grant and by the Leiden- Delft Consortium NanoFront. The work is part of the re- search programmes NWOnano and DESCO, which are fi- nanced by NWO. N.G. acknowledges funding through the GOA project “Solarpaint” of the University of Antwerp and from the FWO project G.0044.13N (Charge order- ing). The microscope used in this work was partly funded by the Hercules Fund from the Flemish Government. We would also like to acknowledge networking support by the COST Action MP 1308 (COST TO-BE). |
Approved |
Most recent IF: NA |
| |
Call Number |
EMAT @ emat @ |
Serial |
4903 |
| Permanent link to this record |
| |
|
| |
|
Author |
Kutukov, P.; Rumyantseva, M.; Krivetskiy, V.; Filatova, D.; Batuk, M.; Hadermann, J.; Khmelevsky, N.; Aksenenko, A.; Gaskov, A. |
| |
Title |
Influence of Mono- and Bimetallic PtOx, PdOx, PtPdOx Clusters on CO Sensing by SnO2 Based Gas Sensors |
Type |
A1 Journal Article |
| |
Year |
2018 |
Publication |
Nanomaterials |
Abbreviated Journal |
Nanomaterials-Basel |
| |
Volume |
8 |
Issue |
11 |
Pages |
917 |
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
To obtain a nanocrystalline SnO2 matrix and mono- and bimetallic nanocomposites SnO2/Pd, SnO2/Pt, and SnO2/PtPd, a flame spray pyrolysis with subsequent impregnation was used. The materials were characterized using X-ray diffraction (XRD), a single-point BET method, transmission electron microscopy (TEM), and high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) with energy dispersive X-ray (EDX) mapping. The electronic state of the metals in mono- and bimetallic clusters was determined using X-ray photoelectron spectroscopy (XPS). The active surface sites were investigated using the Fourier Transform infrared spectroscopy (FTIR) and thermo-programmed reduction with hydrogen (TPR-H-2) methods. The sensor response of blank SnO2 and nanocomposites had a carbon monoxide (CO) level of 6.7 ppm and was determined in the temperature range 60-300 degrees C in dry (Relative Humidity (RH) = 0%) and humid (RH = 20%) air. The sensor properties of the mono- and bimetallic nanocomposites were analyzed on the basis of information on the electronic state, the distribution of modifiers in SnO2 matrix, and active surface centers. For SnO2/PtPd, the combined effect of the modifiers on the electrophysical properties of SnO2 explained the inversion of sensor response from n- to p-types observed in dry conditions. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000451316100052 |
Publication Date |
2018-11-07 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2079-4991 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
3.553 |
Times cited |
7 |
Open Access |
Not_Open_Access |
| |
Notes |
This research was funded by the Russian Ministry of Education and Sciences (Agreement No. 14.613.21.0075, RFMEFI61317X0075). |
Approved |
Most recent IF: 3.553 |
| |
Call Number |
EMAT @ emat @c:irua:155767 |
Serial |
5139 |
| Permanent link to this record |
| |
|
| |
|
Author |
Gasparotto, A.; Maccato, C.; Carraro, G.; Sada, C.; Štangar, U.L.; Alessi, B.; Rocks, C.; Mariotti, D.; La Porta, A.; Altantzis, T.; Barreca, D. |
| |
Title |
Surface Functionalization of Grown-on-Tip ZnO Nanopyramids: From Fabrication to Light-Triggered Applications |
Type |
A1 Journal Article |
| |
Year |
2019 |
Publication |
Acs Applied Materials & Interfaces |
Abbreviated Journal |
Acs Appl Mater Inter |
| |
Volume |
11 |
Issue |
17 |
Pages |
15881-15890 |
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
We report on a combined chemical vapor deposition (CVD)/radio frequency (RF) sputtering synthetic strategy for the controlled surface modification of ZnO nanostructures by Ti-containing species. Specifically, the proposed approach consists in the CVD of grown-on-tip ZnO nanopyramids, followed by titanium RF sputtering under mild conditions. The results obtained by a thorough characterization demonstrate the successful ZnO surface functionalization with dispersed Ti-containing species in low amounts. This phenomenon, in turn, yields a remarkable enhancement of photoactivated superhydrophilic behavior, self-cleaning ability, and photocatalytic performances in comparison to bare ZnO. The reasons accounting for such an improvement are unravelled by a multitechnique analysis, elucidating the interplay between material chemico-physical properties and the corresponding functional behavior. Overall, the proposed strategy stands as an amenable tool for the mastering of semiconductor-based functional nanoarchitectures through ad hoc engineering of the system surface. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000466988800078 |
Publication Date |
2019-04-18 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1944-8244 |
ISBN |
|
Additional Links |
|
| |
Impact Factor |
7.504 |
Times cited |
1 |
Open Access |
Not_Open_Access |
| |
Notes |
The research leading to these results has received financial support from Padova University ACTION postdoc fellowship, DOR 2016-2018, P-DiSC #03BIRD2016-UNIPD projects, and HERALD COST Action MP1402-37831. The support from EPSRC (awards EP/R008841/1 and EP/M024938/1) as well as from the Slovenian Research Agency (research core funding No. P1-0134) is also recognized. T.A. acknowledges a postdoctoral grant from the Research Foundation Flanders (FWO, Belgium). The authors are grateful to Dr. Sebastiano Pianta (Department of Chemical Sciences, Padova University, Italy) for experimental assistance. |
Approved |
Most recent IF: 7.504 |
| |
Call Number |
EMAT @ emat @ |
Serial |
5185 |
| Permanent link to this record |
| |
|
| |
|
Author |
Bhatia, H.; Keshavarz, M.; Martin, C.; Van Gaal, L.; Zhang, Y.; de Coen, B.; Schrenker, N.J.; Valli, D.; Ottesen, M.; Bremholm, M.; Van de Vondel, J.; Bals, S.; Hofkens, J.; Debroye, E. |
| |
Title |
Achieving High Moisture Tolerance in Pseudohalide Perovskite Nanocrystals for Light-Emitting Diode Application |
Type |
A1 Journal Article |
| |
Year |
2023 |
Publication |
ACS Applied Optical Materials |
Abbreviated Journal |
ACS Appl. Opt. Mater. |
| |
Volume |
1 |
Issue |
6 |
Pages |
1184-1191 |
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
The addition of potassium thiocyanate (KSCN) to the FAPbBr3 structure and subsequent post-treatment of nanocrystals (NCs) lead to high quantum confinement, resulting in a photoluminescent quantum yield (PLQY) approaching unity and microsecond decay times. This synergistic approach demonstrated exceptional stability under humid conditions, retaining 70% of the PLQY for over a month, while the untreated NCs degrade within 24 h. Additionally, the devices incorporating the post-treated NCs displayed 1.5% external quantum efficiency (EQE), a 5-fold improvement over untreated devices. These results provide promising opportunities for the use of perovskites in moisture-stable optoelectronics. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
|
Publication Date |
2023-06-23 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2771-9855 |
ISBN |
|
Additional Links |
UA library record |
| |
Impact Factor |
|
Times cited |
|
Open Access |
OpenAccess |
| |
Notes |
Hercules Foundation, HER/11/14 ; European Commission; Ministerio de Ciencia e Innovaci?n, PID2021-128761OA-C22 ; European Regional Development Fund; Vlaamse regering, CASAS2 Meth/15/04 ; Fonds Wetenschappelijk Onderzoek, 1238622N 1514220N 1S45223N G.0B39.15 G.0B49.15 G098319N S002019N ZW15_09-GOH6316 ; Onderzoeksraad, KU Leuven, C14/19/079 db/21/006/bm iBOF-21-085 STG/21/010 ; Junta de Comunidades de Castilla-La Mancha, SBPLY/21/180501/000127 ; H2020 European Research Council, 642196 815128 ; |
Approved |
Most recent IF: NA |
| |
Call Number |
EMAT @ emat @c:irua:201011 |
Serial |
8975 |
| Permanent link to this record |
| |
|
| |
|
Author |
Grünewald, L.; Chezganov, D.; De Meyer, R.; Orekhov, A.; Van Aert, S.; Bogaerts, A.; Bals, S.; Verbeeck, J. |
| |
Title |
In Situ Plasma Studies Using a Direct Current Microplasma in a Scanning Electron Microscope |
Type |
A1 Journal Article |
| |
Year |
2024 |
Publication |
Advanced Materials Technologies |
Abbreviated Journal |
Adv Materials Technologies |
| |
Volume |
|
Issue |
|
Pages |
|
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
Microplasmas can be used for a wide range of technological applications and to improve the understanding of fundamental physics. Scanning electron microscopy, on the other hand, provides insights into the sample morphology and chemistry of materials from the mm‐ down to the nm‐scale. Combining both would provide direct insight into plasma‐sample interactions in real‐time and at high spatial resolution. Up till now, very few attempts in this direction have been made, and significant challenges remain. This work presents a stable direct current glow discharge microplasma setup built inside a scanning electron microscope. The experimental setup is capable of real‐time in situ imaging of the sample evolution during plasma operation and it demonstrates localized sputtering and sample oxidation. Further, the experimental parameters such as varying gas mixtures, electrode polarity, and field strength are explored and experimental<italic>V</italic>–<italic>I</italic>curves under various conditions are provided. These results demonstrate the capabilities of this setup in potential investigations of plasma physics, plasma‐surface interactions, and materials science and its practical applications. The presented setup shows the potential to have several technological applications, for example, to locally modify the sample surface (e.g., local oxidation and ion implantation for nanotechnology applications) on the µm‐scale. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
001168639900001 |
Publication Date |
2024-02-25 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2365-709X |
ISBN |
|
Additional Links |
UA library record; WoS full record |
| |
Impact Factor |
6.8 |
Times cited |
|
Open Access |
OpenAccess |
| |
Notes |
L.G., S.B., and J.V. acknowledge support from the iBOF-21-085 PERsist research fund. D.C., S.V.A., and J.V. acknowledge funding from a TOPBOF project of the University of Antwerp (FFB 170366). R.D.M., A.B., and J.V. acknowledge funding from the Methusalem project of the University of Antwerp (FFB 15001A, FFB 15001C). A.O. and J.V. acknowledge funding from the Research Foundation Flanders (FWO, Belgium) project SBO S000121N. |
Approved |
Most recent IF: 6.8; 2024 IF: NA |
| |
Call Number |
EMAT @ emat @c:irua:204363 |
Serial |
8995 |
| Permanent link to this record |
| |
|
| |
|
Author |
Vandemeulebroucke, D.; Batuk, M.; Hajizadeh, A.; Wastiaux, M.; Roussel, P.; Hadermann, J. |
| |
Title |
Incommensurate Modulations and Perovskite Growth in LaxSr2–xMnO4−δAffecting Solid Oxide Fuel Cell Conductivity |
Type |
A1 Journal Article |
| |
Year |
2024 |
Publication |
Chemistry of Materials |
Abbreviated Journal |
Chem. Mater. |
| |
Volume |
|
Issue |
|
Pages |
|
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
Ruddlesden-Popper La????Sr2−????MnO4−???? materials are interesting symmetric solid oxide
fuel cell electrodes due to their good redox stability, mixed ionic and electronic conducting behavior and thermal expansion that matches well with common electrolytes. In reducing environments – as at a solid oxide fuel cell anode – the x = 0.5 member, i.e. La0.5Sr1.5MnO4−????, has a much higher total conductivity than compounds with a different La/Sr ratio, although all those compositions have the same K2NiF4-type I4/mmm structure. The origin for this conductivity difference is not yet known in literature. Now, a combination of in-situ and ex-situ 3D electron diffraction, high-resolution imaging, energy-dispersive X-ray analysis and electron energy-loss spectroscopy uncovered clear differences between x=0.25 and x=0.5 in the pristine structure, as well as in the transformations upon high-temperature reduction. In La0.5Sr1.5MnO4−????, Ruddlesden-Popper n=2 layer defects and an amorphous surface layer are present, but not in La0.25Sr1.75MnO4−????. After annealing at 700°C in 5% H2/Ar, La0.25Sr1.75MnO4−???? transforms to a tetragonal 2D incommensurately modulated structure with modulation vectors ⃗????1 = 0.2848(1) · (⃗????* +⃗????*) and ⃗????2 =0.2848(1) · (⃗????* – ⃗????*), whereas La0.5Sr1.5MnO4−???? only partially transforms to an orthorhombic 1D incommensurately modulated structure,
with ⃗???? = 0.318(2) · ⃗????*. Perovskite domains grow at the crystal edge at 700°C in 5%
H2 or vacuum, due to the higher La concentration on the surface compared to the bulk, which leads to a different thermodynamic equilibrium. Since it is known that a lower degree of oxygen vacancy ordering and a higher amount of perovskite blocks enhance oxygen mobility, those differences in defect structure and structural transformation upon reduction, might all contribute to the higher conductivity of La0.5Sr1.5MnO4−???? in solid oxide fuel cell anode conditions compared to other La/Sr ratios. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
English |
Wos |
001174840900001 |
Publication Date |
2024-02-20 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0897-4756 |
ISBN |
|
Additional Links |
UA library record; WoS full record |
| |
Impact Factor |
8.6 |
Times cited |
|
Open Access |
Not_Open_Access |
| |
Notes |
Universiteit Antwerpen, BOF TOP 38689 ; Fonds Wetenschappelijk Onderzoek, I003218N ; European Commission NanED, 956099 ; |
Approved |
Most recent IF: 8.6; 2024 IF: 9.466 |
| |
Call Number |
EMAT @ emat @c:irua:204354 |
Serial |
8997 |
| Permanent link to this record |
| |
|
| |
|
Author |
Chakraborty, J.; Chatterjee, A.; Molkens, K.; Nath, I.; Arenas Esteban, D.; Bourda, L.; Watson, G.; Liu, C.; Van Thourhout, D.; Bals, S.; Geiregat, P.; Van der Voort, P. |
| |
Title |
Decoding Excimer Formation in Covalent–Organic Frameworks Induced by Morphology and Ring Torsion |
Type |
A1 Journal Article |
| |
Year |
2024 |
Publication |
Advanced Materials |
Abbreviated Journal |
Advanced Materials |
| |
Volume |
|
Issue |
|
Pages |
|
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
A thorough and quantitative understanding of the fate of excitons in covalent–organic frameworks (COFs) after photoexcitation is essential for their augmented optoelectronic and photocatalytic applications via precise structure tuning. The synthesis of a library of COFs having identical chemical backbone with impeded conjugation, but varied morphology and surface topography to study the effect of these physical properties on the photophysics of the materials is herein reported. The variation of crystallite size and surface topography substantified different aggregation pattern in the COFs, which leads to disparities in their photoexcitation and relaxation properties. Depending on aggregation, an inverse correlation between bulk luminescence decay time and exciton binding energy of the materials is perceived. Further transient absorption spectroscopic analysis confirms the presence of highly localized, immobile, Frenkel excitons (of diameter 0.3–0.5 nm) via an absence of annihilation at high density, most likely induced by structural torsion of the COF skeletons, which in turn preferentially relaxes via long‐lived (nanosecond to microsecond) excimer formation (in femtosecond scale) over direct emission. These insights underpin the importance of structural and topological design of COFs for their targeted use in photocatalysis. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
001206226700001 |
Publication Date |
2024-04-22 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0935-9648 |
ISBN |
|
Additional Links |
UA library record; WoS full record |
| |
Impact Factor |
29.4 |
Times cited |
|
Open Access |
|
| |
Notes |
PVDV, JC, AC, and IN acknowledge the FWO-Vlaanderen for research grant G020521N and the research board of UGent (BOF) through a Concerted Research Action (GOA010-17). JC acknowledges UGent for BOF postdoctoral grant (2022.0032.01). AC acknowledges FWO- Vlaanderen for postdoctoral grant (12T7521N). KM, DVT and PG acknowledges FWO- Vlaanderen for research grant G0B2921N. SB and DAE acknowledge financial support from ERC Consolidator Grant Number 815128 REALNANO. CHL acknowledges China Scholarship Council doctoral grant (201908110280). PVDV acknowledges Hercules Project AUGE/17/07 for the UV VIS DRS spectrometer and UGent BASBOF BOF20/BAS/015 for the powder X-Ray Diffractometer. PG thanks UGent for support of the Core Facility NOLIMITS. |
Approved |
Most recent IF: 29.4; 2024 IF: 19.791 |
| |
Call Number |
EMAT @ emat @c:irua:205967 |
Serial |
9118 |
| Permanent link to this record |
| |
|
| |
|
Author |
Ignatova, K.; Vlasov, E.; Seddon, S.D.; Gauquelin, N.; Verbeeck, J.; Wermeille, D.; Bals, S.; Hase, T.P.A.; Arnalds, U.B. |
| |
Title |
Phase coexistence induced surface roughness in V2O3/Ni magnetic heterostructures |
Type |
A1 Journal Article |
| |
Year |
2024 |
Publication |
APL Materials |
Abbreviated Journal |
|
| |
Volume |
12 |
Issue |
4 |
Pages |
|
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
We present an investigation of the microstructure changes in V2O3 as it goes through its inherent structural phase transition. Using V2O3 films with a well-defined crystal structure deposited by reactive magnetron sputtering on r-plane Al2O3 substrates, we study the phase coexistence region and its impact on the surface roughness of the films and the magnetic properties of overlying Ni magnetic layers in V2O3/Ni hybrid magnetic heterostructures. The simultaneous presence of two phases in V2O3 during its structural phase transition was identified with high resolution x-ray diffraction and led to an increase in surface roughness observed using x-ray reflectivity. The roughness reaches its maximum at the midpoint of the transition. In V2O3/Ni hybrid heterostructures, we find a concomitant increase in the coercivity of the magnetic layer correlated with the increased roughness of the V2O3 surface. The chemical homogeneity of the V2O3 is confirmed through transmission electron microscopy analysis. High-angle annular dark field imaging and electron energy loss spectroscopy reveal an atomically flat interface between Al2O3 and V2O3, as well as a sharp interface between V2O3 and Ni. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
001202661800003 |
Publication Date |
2024-04-01 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2166-532X |
ISBN |
|
Additional Links |
UA library record; WoS full record |
| |
Impact Factor |
6.1 |
Times cited |
|
Open Access |
|
| |
Notes |
This work was supported by the funding from the University of Iceland Research Fund, the Icelandic Research Fund Grant No. 207111. Instrumentation funding from the Icelandic Infrastructure Fund is acknowledged. This work was based on experiments per- formed at the BM28 (XMaS) beamline at the European Synchrotron Radiation Facility, Grenoble, France. XMaS is a National Research Facility funded by the UK EPSRC and managed by the Universi- ties of Liverpool and Warwick. This project has received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 823717—ESTEEM3. |
Approved |
Most recent IF: 6.1; 2024 IF: 4.335 |
| |
Call Number |
EMAT @ emat @c:irua:205569 |
Serial |
9120 |
| Permanent link to this record |
| |
|
| |
|
Author |
Guerrero, R.M.; Lemir, I.D.; Carrasco, S.; Fernández-Ruiz, C.; Kavak, S.; Pizarro, P.; Serrano, D.P.; Bals, S.; Horcajada, P.; Pérez, Y. |
| |
Title |
Scaling-Up Microwave-Assisted Synthesis of Highly Defective Pd@UiO-66-NH2Catalysts for Selective Olefin Hydrogenation under Ambient Conditions |
Type |
A1 Journal Article |
| |
Year |
2024 |
Publication |
ACS Applied Materials & Interfaces |
Abbreviated Journal |
ACS Appl. Mater. Interfaces |
| |
Volume |
|
Issue |
|
Pages |
|
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
The need to develop green and cost-effective industrial catalytic processes has led to growing interest in preparing more robust, efficient, and selective heterogeneous catalysts at a large scale. In this regard, microwave-assisted synthesis is a fast method for fabricating heterogeneous catalysts (including metal oxides, zeolites, metal–organic frameworks, and supported metal nanoparticles) with enhanced catalytic properties, enabling synthesis scale-up. Herein, the synthesis of nanosized UiO-66-NH2 was optimized via a microwave-assisted hydrothermal method to obtain defective matrices essential for the stabilization of metal nanoparticles, promoting catalytically active sites for hydrogenation reactions (760 kg·m–3·day–1 space time yield, STY). Then, this protocol was scaled up in a multimodal microwave reactor, reaching 86% yield (ca. 1 g, 1450 kg·m–3·day–1 STY) in only 30 min. Afterward, Pd nanoparticles were formed in situ decorating the nanoMOF by an effective and fast microwave-assisted hydrothermal method, resulting in the formation of Pd@UiO-66-NH2 composites. Both the localization and oxidation states of Pd nanoparticles (NPs) in the MOF were achieved using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and X-ray photoelectron spectroscopy (XPS), respectively. The optimal composite, loaded with 1.7 wt % Pd, exhibited an extraordinary catalytic activity (>95% yield, 100% selectivity) under mild conditions (1 bar H2, 25 °C, 1 h reaction time), not only in the selective hydrogenation of a variety of single alkenes (1-hexene, 1-octene, 1-tridecene, cyclohexene, and tetraphenyl ethylene) but also in the conversion of a complex mixture of alkenes (i.e., 1-hexene, 1-tridecene, and anethole). The results showed a powerful interaction and synergy between the active phase (Pd NPs) and the catalytic porous scaffold (UiO-66-NH2), which are essential for the selectivity and recyclability. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
|
Publication Date |
2024-04-26 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1944-8244 |
ISBN |
|
Additional Links |
|
| |
Impact Factor |
9.5 |
Times cited |
|
Open Access |
|
| |
Notes |
The authors gratefully acknowledge financial support from “Comunidad de Madrid” and European Regional Development Fund-FEDER through the project HUB MADRID+CIRCULAR; the State Research Agency (MCIN/AEI /10.13039/501100011033) through the grant with reference number CEX2019-000931-M received in the 2019 call for “Severo Ochoa Centres of Excellence” and “María de Maeztu Units of Excellence” of the State Programme for Knowledge Generation and Scientific and Technological Strengthening of the R&D&I System; and MICIU through the project “NAPOLION” (PID2022-139956OB-I00). S.K. acknowledges the Flemish Fund for Scientific Research (FWO Vlaanderen) through a PhD research grant (1181124N). |
Approved |
Most recent IF: 9.5; 2024 IF: 7.504 |
| |
Call Number |
EMAT @ emat @ |
Serial |
9126 |
| Permanent link to this record |
| |
|
| |
|
Author |
Chakraborty, J.; Chatterjee, A.; Molkens, K.; Nath, I.; Arenas Esteban, D.; Bourda, L.; Watson, G.; Liu, C.; Van Thourhout, D.; Bals, S.; Geiregat, P.; Van der Voort, P. |
| |
Title |
Decoding Excimer Formation in Covalent–Organic Frameworks Induced by Morphology and Ring Torsion |
Type |
A1 Journal Article |
| |
Year |
2024 |
Publication |
Advanced Materials |
Abbreviated Journal |
Advanced Materials |
| |
Volume |
|
Issue |
|
Pages |
|
| |
Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| |
Abstract |
A thorough and quantitative understanding of the fate of excitons in covalent–organic frameworks (COFs) after photoexcitation is essential for their augmented optoelectronic and photocatalytic applications via precise structure tuning. The synthesis of a library of COFs having identical chemical backbone with impeded conjugation, but varied morphology and surface topography to study the effect of these physical properties on the photophysics of the materials is herein reported. The variation of crystallite size and surface topography substantified different aggregation pattern in the COFs, which leads to disparities in their photoexcitation and relaxation properties. Depending on aggregation, an inverse correlation between bulk luminescence decay time and exciton binding energy of the materials is perceived. Further transient absorption spectroscopic analysis confirms the presence of highly localized, immobile, Frenkel excitons (of diameter 0.3–0.5 nm) via an absence of annihilation at high density, most likely induced by structural torsion of the COF skeletons, which in turn preferentially relaxes via long‐lived (nanosecond to microsecond) excimer formation (in femtosecond scale) over direct emission. These insights underpin the importance of structural and topological design of COFs for their targeted use in photocatalysis. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
001206226700001 |
Publication Date |
2024-04-22 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0935-9648 |
ISBN |
|
Additional Links |
UA library record; WoS full record |
| |
Impact Factor |
29.4 |
Times cited |
|
Open Access |
|
| |
Notes |
PVDV, JC, AC, and IN acknowledge the FWO-Vlaanderen for research grant G020521N and the research board of UGent (BOF) through a Concerted Research Action (GOA010-17). JC acknowledges UGent for BOF postdoctoral grant (2022.0032.01). AC acknowledges FWOVlaanderen for postdoctoral grant (12T7521N). KM, DVT and PG acknowledges FWOVlaanderen for research grant G0B2921N. SB and DAE acknowledge financial support from ERC Consolidator Grant Number 815128 REALNANO. CHL acknowledges China Scholarship Council doctoral grant (201908110280). PVDV acknowledges Hercules Project AUGE/17/07 for the UV VIS DRS spectrometer and UGent BASBOF BOF20/BAS/015 for the powder X-Ray Diffractometer. PG thanks UGent for support of the Core Facility NOLIMITS. |
Approved |
Most recent IF: 29.4; 2024 IF: 19.791 |
| |
Call Number |
EMAT @ emat @c:irua:205967 |
Serial |
9130 |
| Permanent link to this record |
| |
|
| |
|
Author |
Müller, E.; Kruse, P.; Gerthsen, D.; Schowalter, M.; Rosenauer, A.; Lamoen, D.; Kling, R. |
| |
Title |
Measurement of the mean inner potential of ZnO nanorods by transmission electron holography |
Type |
A1 Journal article |
| |
Year |
2005 |
Publication |
Microscopy of Semiconducting Materials |
Abbreviated Journal |
|
| |
Volume |
107 |
Issue |
|
Pages |
303-306 |
| |
Keywords |
A1 Journal article; Electron Microscopy for Materials Science (EMAT) |
| |
Abstract |
|
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
Berlin |
Editor |
|
| |
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
| |
Series Editor |
|
Series Title |
SPRINGER PROCEEDINGS IN PHYSICS |
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0930-8989 |
ISBN |
|
Additional Links |
UA library record; WoS full record; |
| |
Impact Factor |
|
Times cited |
|
Open Access |
|
| |
Notes |
|
Approved |
Most recent IF: NA |
| |
Call Number |
UA @ lucian @ c:irua:72914 |
Serial |
1962 |
| Permanent link to this record |
