NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	301–330 of 336 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 >>

List View

Citations

Details

	Records
	Author	Cao, S.; Nishida, M.; Schryvers, D.
	Title	Quantitative three-dimensional analysis of Ni₄Ti₃ precipitate morphology and distribution in polycrystalline Ni-Ti			Type	A1 Journal article
	Year	2011	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	59	Issue	4	Pages	1780-1789
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The three-dimensional size, morphology and distribution of Ni4Ti3 precipitates in a Ni50.8Ti49.2 polycrystalline shape memory alloy with a heterogeneous microstructure have been investigated using a focused ion beam/scanning electron microscopy slice-and-view procedure. The mean volume, central plane diameter, thickness, aspect ratio and sphericity of the precipitates in the grain interior as well as near to the grain boundary were measured and/or calculated. The morphology of the precipitates was quantified by determining the equivalent ellipsoids with the same moments of inertia and classified according to the Zingg scheme. Also, the pair distribution functions describing the three-dimensional distributions were obtained from the coordinates of the precipitate mass centres. Based on this new data it is suggested that the existence of the heterogeneous microstructure could be due to a very small concentration gradient in the grains of the homogenized material and that the resulting multistage martensitic transformation originates in strain effects related to the size of the precipitates and scale differences of the available B2 matrix in between the precipitates.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000287265100045	Publication Date	2010-12-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	34	Open Access
	Notes	Fwo			Approved	Most recent IF: 5.301; 2011 IF: 3.755
	Call Number	UA @ lucian @ c:irua:85533			Serial	2766
Permanent link to this record



	Author	Shi, H.; Frenzel, J.; Martinez, G.T.; Van Rompaey, S.; Bakulin, A.; Kulkova, A.; Van Aert, S.; Schryvers, D.
	Title	Site occupation of Nb atoms in ternary Ni-Ti-Nb shape memory alloys			Type	A1 Journal article
	Year	2014	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	74	Issue		Pages	85-95
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Nb occupancy in the austenite B2-NiTi matrix and Ti2Ni phase in NiTiNb shape memory alloys was investigated by aberration-corrected scanning transmission electron microscopy and precession electron diffraction. In both cases, Nb atoms were found to prefer to occupy the Ti rather than Ni sites. A projector augmented wave method within density functional theory was used to calculate the atomic and electronic structures of the austenitic B2-NiTi matrix phase and the Ti2Ni precipitates both with and without addition of Nb. The obtained formation energies and analysis of structural and electronic characteristics explain the preference for Ti sites for Nb over Ni sites.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000338621400009	Publication Date	2014-05-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	21	Open Access
	Notes				Approved	Most recent IF: 5.301; 2014 IF: 4.465
	Call Number	UA @ lucian @ c:irua:118334			Serial	3028
Permanent link to this record



	Author	Seo, J.W.; Schryvers, D.
	Title	TEM investigation of the microstructure and defects of CuZr martensite: 1: morphology and twin systems			Type	A1 Journal article
	Year	1998	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	46	Issue		Pages	1165-1175
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000072289100009	Publication Date	2002-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	46	Open Access
	Notes				Approved	Most recent IF: 5.301; 1998 IF: 1.834
	Call Number	UA @ lucian @ c:irua:48360			Serial	3479
Permanent link to this record



	Author	Seo, J.W.; Schryvers, D.
	Title	TEM investigation of the microstructure and defects of CuZr martensite: 2: planar defects			Type	A1 Journal article
	Year	1998	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	46	Issue		Pages	1177-1183
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000072289100010	Publication Date	2002-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	21	Open Access
	Notes				Approved	Most recent IF: 5.301; 1998 IF: 1.834
	Call Number	UA @ lucian @ c:irua:48361			Serial	3480
Permanent link to this record



	Author	Chen, X.; Cao, S.; Ikeda, T.; Srivastava, V.; Snyder, G.J.; Schryvers, D.; James, R.D.
	Title	A weak compatibility condition for precipitation with application to the microstructure of PbTe-Sb₂Te₃ thermoelectrics			Type	A1 Journal article
	Year	2011	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	59	Issue	15	Pages	6124-6132
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	We propose a weak condition of compatibility between phases applicable to cases exhibiting full or partial coherence and Widmanstätten microstructure. The condition is applied to the study of Sb2Te3 precipitates in a PbTe matrix in a thermoelectric alloy. The weak condition of compatibility predicts elongated precipitates lying on a cone determined by a transformation stretch tensor. Comparison of this cone with the long directions of precipitates determined by a slice-and-view method of scanning electron microscopy combined with focused ion beam sectioning shows good agreement between theory and experiment. A further study of the morphology of precipitates by the Eshelby method suggests that interfacial energy also plays a role and gives an approximate value of interfacial energy per unit area of 250 dyn cm−1.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000294086900026	Publication Date	2011-07-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	8	Open Access
	Notes				Approved	Most recent IF: 5.301; 2011 IF: 3.755
	Call Number	UA @ lucian @ c:irua:92388			Serial	3911
Permanent link to this record



	Author	Amin-Ahmadi, B.; Connétable, D.; Fivel, M.; Tanguy, D.; Delmelle, R.; Turner, S.; Malet, L.; Godet, S.; Pardoen, T.; Proost, J.; Schryvers, D.; Idrissi, H.
	Title	Dislocation/hydrogen interaction mechanisms in hydrided nanocrystalline palladium films			Type	A1 Journal article
	Year	2016	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	111	Issue	111	Pages	253-261
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The nanoscale plasticity mechanisms activated during hydriding cycles in sputtered nanocrystalline Pd films have been investigated ex-situ using advanced transmission electron microscopy techniques. The internal stress developing within the films during hydriding has been monitored in-situ. Results showed that in Pd films hydrided to β-phase, local plasticity was mainly controlled by dislocation activity in spite of the small grain size. Changes of the grain size distribution and the crystallographic texture have not been observed. In contrast, significant microstructural changes were not observed in Pd films hydrided to α-phase. Moreover, the effect of hydrogen loading on the nature and density of dislocations has been investigated using aberration-corrected TEM. Surprisingly, a high density of shear type stacking faults has been observed after dehydriding, indicating a significant effect of hydrogen on the nucleation energy barriers of Shockley partial dislocations. Ab-initio calculations of the effect of hydrogen on the intrinsic stable and unstable stacking fault energies of palladium confirm the experimental observations.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000375812100027	Publication Date	2016-04-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	14	Open Access
	Notes	This work was carried out in the framework of the IAP program of the Belgian State Federal Office for Scientific, Technical and Cultural Affairs, under Contract No. P7/21. The support of the FWO research project G012012N “Understanding nanocrystalline mechanical behaviour from structural investigations” for B. Amin-Ahmadi is also gratefully acknowledged. This work was granted access to the HPC resources of CALMIP (CICT Toulouse, France) under the allocations 2014-p0912 and 2014-p0749.			Approved	Most recent IF: 5.301
	Call Number	c:irua:132678			Serial	4054
Permanent link to this record



	Author	van der Rest, A.; Idrissi, H.; Henry, F.; Favache, A.; Schryvers, D.; Proost, J.; Raskin, J.-P.; Van Overmeere, Q.; Pardoen, T.
	Title	Mechanical behavior of ultrathin sputter deposited porous amorphous Al2O3 films			Type	A1 Journal article
	Year	2017	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	125	Issue	125	Pages	27-37
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The determination of the mechanical properties of porous amorphous Al2O3 thin films is essential to address reliability issues in wear-resistant, optical and electronic coating applications. Testing the mechanical properties of Al2O3 films thinner than 200 nm is challenging, and the link between the mechanical behavior and the microstructure of such films is largely unknown. Herein, we report on the elastic and viscoplastic mechanical properties of amorphous Al2O3 thin films synthesized by reactive magnetron sputtering using a combination of internal stress, nanoindentation, and on-chip uniaxial tensile testing, together with mechanical homogenization models to separate the effect of porosity from intrinsic variations of the response of the sound material. The porosity is made of voids with 2e30 nm diameter. The Young's modulus and hardness of the films decrease by a factor of two when the deposition pressure increases from 1.2 to 8 mTorr. The contribution of porosity was found to be small, and a change in the atomic structure of the amorphous Al2O3 matrix is hypothesized to be the main contributing factor. The activation volume associated to the viscoplastic deformation mechanism is around 100 Å3. Differences in the atomic structure of the films could not be revealed by electron diffraction, pointing to a minute effect of atomic arrangement on the elastic properties.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000394201500003	Publication Date	2016-12-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	5	Open Access	OpenAccess
	Notes	This work has been funded by the Belgian Science Policy through the IAP 7/21 project. The support of the ‘Fonds Belge pour la Recherche dans l’Industrie et l’Agriculture (FRIA)’ for A.v.d.R. is also gratefully acknowledged, as well as the support of FNRS through the grant PDR T.0122.13 “Mecano”.			Approved	Most recent IF: 5.301
	Call Number	EMAT @ emat @ c:irua:138990			Serial	4330
Permanent link to this record



	Author	Ghidelli, M.; Idrissi, H.; Gravier, S.; Blandin, J.-J.; Raskin, J.-P.; Schryvers, D.; Pardoen, T.
	Title	Homogeneous flow and size dependent mechanical behavior in highly ductile Zr 65 Ni 35 metallic glass films			Type	A1 Journal article
	Year	2017	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	131	Issue	131	Pages	246-259
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Motivated by recent studies demonstrating a high strength – high ductility potential of nano-scale metallic glass samples, the mechanical response of freestanding Zr65Ni35 film with sub-micron thickness has been investigated by combining advanced on-chip tensile testing and electron microscopy. Large deformation up to 15% is found for specimen thicknesses below 500 nm with variations depending on specimen size and frame compliance. The deformation is homogenous until fracture, with no evidence of shear banding. The yield stress is doubled when decreasing the specimen cross-section, reaching ~3 GPa for small cross-sections. The fracture strain variation is related to both the stability of the test device and to the specimen size. The study concludes on clear disconnect between the mechanisms controlling the onset of plasticity and the fracture process.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000402343400023	Publication Date	2017-03-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	42	Open Access	OpenAccess
	Notes	This work has been funded by the Belgian Science Policy through the IAP 7/21 project. We acknowledge IDS-FunMat for the PhD financial support.We thank the Renatech network and the PTA (Plateforme Technologique Amont) in Grenoble (France) for TFMG deposition facilities. The WINFAB infrastructure at the UCL and the help of R. Vayrette and M. Coulombier for the on-chip tests. H. Idrissi is currently mandated by the Belgian National Fund for Scientific Research (FSR-FNRS).			Approved	Most recent IF: 5.301
	Call Number	EMAT @ emat @ c:irua:142642			Serial	4562
Permanent link to this record



	Author	Cautaerts, N.; Delville, R.; Stergar, E.; Schryvers, D.; Verwerft, M.
	Title	Characterization of (Ti,Mo,Cr)C nanoprecipitates in an austenitic stainless steel on the atomic scale			Type	A1 Journal article
	Year	2019	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	164	Issue		Pages	90-98
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Nanometer sized (Ti,Mo,Cr)C (MX-type) precipitates that grew in a 24% cold worked Ti-stabilized austenitic stainless steel (grade DIN 1.4970, member of the 15-15Ti austenitic stainless steels) after heat treatment were fully characterized with transmission electron microscopy (TEM), probe corrected high angle annular dark field scanning transmission electron microscopy (HR-HAADF STEM), and atom probe tomography (APT). The precipitates shared the cube-on-cube orientation with the matrix and were facetted on {111} planes, yielding octahedral and elongated octahedral shapes. The misfit dislocations were believed to have Burgers vectors a/6<112> which was verified by geometrical phase analysis (GPA) strain mapping of a matrix-precipitate interface. The dislocations were spaced five to seven atomic planes apart, on average slightly wider than expected for the lattice parameters of steel and TiC. Quantitative atom probe tomography analysis of the precipitates showed that precipitates were significantly enriched in Mo, Cr and V, and that they were hypostoichiometric with respect to C. These findings were consistent with a reduced lattice parameter. The precipitates were found primarily on Shockley partial dislocations originating from the original perfect dislocation network. These novel findings could contribute to the understanding of how TiC nanoprecipitates interact with point defects and matrix dislocations. This is essential for the application of these Ti-stabilized steels in high temperature environments or fast spectrum nuclear fission reactors.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000456902800008	Publication Date	2018-10-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	2	Open Access	Not_Open_Access: Available from 12.10.2020
	Notes	This work was supported by ENGIE [contract number 2015-AC- 007 e BSUEZ6900]; the U.S. Department of Energy, Office of Nuclear Energy under DOE Idaho Operations Office Contract DE-AC07- 051D14517 as part of a Nuclear Science User Facilities experiment; and by the MYRRHA program in development at SCKCEN, Belgium. Special thanks to Dr. H. Mezerji and Dr. T. Altantzis for the work on the FEI Titan microscope.We also want to thank Ms. J. Burns for the help on the FIB and Dr. Y. Wu at CAES for conducting the APT measurements.			Approved	Most recent IF: 5.301
	Call Number	EMAT @ emat @c:irua:154873UA @ admin @ c:irua:154873			Serial	5060
Permanent link to this record



	Author	Ghidelli, M.; Orekhov, A.; Bassi, A.L.; Terraneo, G.; Djemia, P.; Abadias, G.; Nord, M.; Béché, A.; Gauquelin, N.; Verbeeck, J.; Raskin, J.-p.; Schryvers, D.; Pardoen, T.; Idrissi, H.
	Title	Novel class of nanostructured metallic glass films with superior and tunable mechanical properties			Type	A1 Journal article
	Year	2021	Publication	Acta Materialia	Abbreviated Journal	Acta Mater
	Volume		Issue		Pages	116955
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	A novel class of nanostructured Zr50Cu50 (%at.) metallic glass films with superior and tunable mechanical properties is produced by pulsed laser deposition. The process can be controlled to synthetize a wide range of film microstructures including dense fully amorphous, amorphous embedded with nanocrystals and amorphous nano-granular. A unique dense self-assembled nano-laminated atomic arrangement characterized by alternating Cu-rich and Zr/O-rich nanolayers with different local chemical enrichment and amorphous or amorphous-crystalline composite nanostructure has been discovered, while significant in-plane clustering is reported for films synthetized at high deposition pressures. This unique nanoarchitecture is at the basis of superior mechanical properties including large hardness and elastic modulus up to 10 and 140 GPa, respectively and outstanding total elongation to failure (>9%), leading to excellent strength/ductility balance, which can be tuned by playing with the film architecture. These results pave the way to the synthesis of novel class of engineered nanostructured metallic glass films with high structural performances attractive for a number of applications in microelectronics and coating industry.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000670077800004	Publication Date	2021-05-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	27	Open Access	OpenAccess
	Notes	H.I. is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). This work was supported by the Fonds de la Recherche Scientifique – FNRS under Grant T.0178.19 and Grant CDR– J011320F. We acknowledge funding for the direct electron detector used in the 4D stem studies from the Hercules fund 'Direct electron detector for soft matter TEM' from the Flemish Government J.V acknowledges funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 823717 – ESTEEM3. A.O. has received partial funding from the GOA project “Solarpaint” of the University of Antwerp. A.B. and J.V. acknowledge funding through FWO project G093417N ('Compressed sensing enabling low dose imaging in transmission electron microscopy') from the Flanders Research Fund. M.G. and A.L.B acknowledge Chantelle Ekanem for support in PLD depositions.			Approved	Most recent IF: 5.301
	Call Number	EMAT @ emat @c:irua:178142			Serial	6761
Permanent link to this record



	Author	Yang, M.; Orekhov, A.; Hu, Z.-Y.; Feng, M.; Jin, S.; Sha, G.; Li, K.; Samaee, V.; Song, M.; Du, Y.; Van Tendeloo, G.; Schryvers, D.
	Title	Shearing and rotation of β'' and β' precipitates in an Al-Mg-Si alloy under tensile deformation : in-situ and ex-situ studies			Type	A1 Journal article
	Year	2021	Publication	Acta Materialia	Abbreviated Journal	Acta Mater
	Volume	220	Issue		Pages	117310
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The interaction between dislocations and nano-precipitates during deformation directly influences hardening response of precipitation-strengthening metals such as Al-Mg-Si alloys. However, how coherent and semi-coherent nano-precipitates accommodate external deformation applied to an Al alloy remains to be elucidated. In-situ tensile experiments in a transmission electron microscope (TEM) were conducted to study the dynamic process of dislocations cutting through coherent needle-like beta '' precipitates with diameters of 3 similar to 8 nm. Comprehensive investigations using in-situ, ex-situ TEM and atom probe tomography uncovered that beta '' precipitates were firstly sheared into small fragments, and then the rotation of the fragments, via sliding along precipitate/matrix interfaces, destroyed their initially coherent interface with the Al matrix. In contrast, semi-coherent beta' precipitates with sizes similar to beta '' were more difficult to be fragmented and accumulation of dislocations at the interface increased interface misfit between beta' and the Al matrix. Consequently, beta' precipitates could basically maintain their needle-like shape after the tensile deformation. This research gains new insights into the interaction between nano-precipitates and dislocations. (C) 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000705535300005	Publication Date	2021-09-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 5.301
	Call Number	UA @ admin @ c:irua:182528			Serial	6884
Permanent link to this record



	Author	Van Tendeloo, G.; Schryvers, D.; van Dyck, D.; van Landuyt, J.; Amelinckx, S.
	Title	Up close: Center for Electron Microscopy of Materials Science at the University of Antwerp			Type	A1 Journal article
	Year	1994	Publication	MRS bulletin	Abbreviated Journal	Mrs Bull
	Volume		Issue		Pages	57-59
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Pittsburgh, Pa	Editor
	Language		Wos	A1994PH66300015	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0883-7694	ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor	5.667	Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:9996			Serial	3821
Permanent link to this record



	Author	Wang, B.; Idrissi, H.; Galceran, M.; Colla, M.S.; Turner, S.; Hui, S.; Raskin, J.P.; Pardoen, T.; Godet, S.; Schryvers, D.
	Title	Advanced TEM investigation of the plasticity mechanisms in nanocrystalline freestanding palladium films with nanoscale twins			Type	A1 Journal article
	Year	2012	Publication	International journal of plasticity	Abbreviated Journal	Int J Plasticity
	Volume	37	Issue		Pages	140-156
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Nanocrystalline palladium thin films deposited by electron-beam evaporation and deformed by on-chip tensile testing reveal a surprisingly large strain hardening capacity when considering the small similar to 25 nm grain size. The as-grown films contain several coherent single and multifold twin boundaries. The coherency of the twin boundaries considerably decreases with deformation due to dislocation/twin boundary interactions. These reactions are described based on a detailed analysis of the number and the type of dislocations located at the twin boundaries using high-resolution TEM, including aberration corrected microscopy. Sessile Frank dislocations were observed at the twin/matrix interfaces, explaining the loss of the TB coherency due to the Burgers vector pointing out of the twinning plane. Grain boundary mediated processes were excluded as a mechanism dominating the plastic deformation based on the investigation of the grain size distribution as well as the crystallographic texture using Automated Crystallographic Orientation Indexation TEM. Other factors influencing the plastic deformation such as impurities and the presence of a native passivation oxide layer at the surface of the films were investigated using analytical TEM. The twin boundaries observed in the present work partly explain the high strain hardening capacity by providing both increasing resistance to dislocation motion with deformation and a source for dislocation multiplication. (C) 2012 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000307416100009	Publication Date	2012-05-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0749-6419;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.702	Times cited	44	Open Access
	Notes	Iap; Fwo			Approved	Most recent IF: 5.702; 2012 IF: 4.356
	Call Number	UA @ lucian @ c:irua:101082			Serial	74
Permanent link to this record



	Author	Delville, R.; Malard, B.; Pilch, J.; Sittner, P.; Schryvers, D.
	Title	Transmission electron microscopy investigation of dislocation slip during superelastic cycling of NiTi wires			Type	A1 Journal article
	Year	2011	Publication	International journal of plasticity	Abbreviated Journal	Int J Plasticity
	Volume	27	Issue	2	Pages	282-297
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Superelastic deformation of thin NiTi wires containing various nanograined microstructures was investigated by tensile cyclic loading with in situ evaluation of electric resistivity. Defects created by the superelastic cycling in these wires were analyzed by transmission electron microscopy. The role of dislocation slip in superelastic deformation is discussed. NiTi wires having finest microstructures (grain diameter <100 nm) are highly resistant against dislocation slip, while those with fully recrystallized microstructure and grain size exceeding 200 nm are prone to dislocation slip. The density of the observed dislocation defects increases significantly with increasing grain size. The upper plateau stress of the superelastic stressstrain curves is largely grain size independent from 10 up to 1000 nm. It is hence claimed that the HallPetch relationship fails for the stress-induced martensitic transformation in this grain size range. It is proposed that dislocation slip taking place during superelastic cycling is responsible for the accumulated irreversible strains, cyclic instability and degradation of functional properties. No residual martensite phase was found in the microstructures of superelastically cycled wires by TEM and results of the in situ electric resistance measurements during straining also indirectly suggest that none or very little martensite phase remains in the studied cycled superelastic wires after unloading. The accumulation of dislocation defects, however, does not prevent the superelasticity. It only affects the shape of the stressstrain response, makes it unstable upon cycling and changes the deformation mode from localized to homogeneous. The activity of dislocation slip during superelastic deformation of NiTi increases with increasing test temperature and ultimately destroys the superelasticity as the plateau stress approaches the yield stress for slip. Deformation twins in the austenite phase ({1 1 4} compound twins) were frequently found in cycled wires having largest grain size. It is proposed that they formed in the highly deformed B19′ martensite phase during forward loading and are retained in austenite after unloading. Such twinning would represent an additional deformation mechanism of NiTi yielding residual irrecoverable strains.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000284921800007	Publication Date	2010-05-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0749-6419;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.702	Times cited	157	Open Access
	Notes	Fwo; Iap			Approved	Most recent IF: 5.702; 2011 IF: 4.603
	Call Number	UA @ lucian @ c:irua:84651			Serial	3709
Permanent link to this record



	Author	Van Aelst, J.; Philippaerts, A.; Bartholomeeusen, E.; Fayad, E.; Thibault-Starzyk, F.; Lu, J.; Schryvers, D.; Ooms, R.; Verboekend, D.; Jacobs, P.; Sels, B.
	Title	Towards biolubricant compatible vegetable oils by pore mouth hydrogenation with shape-selective Pt/ZSM-5 catalysts			Type	A1 Journal article
	Year	2016	Publication	Catalysis science & technology	Abbreviated Journal	Catal Sci Technol
	Volume	6	Issue	6	Pages	2820-2828
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Pt/ZSM-5 catalysts with various crystal sizes were prepared via competitive ion-exchange, followed by a slow activation procedure. Even when using very large ZSM-5 crystals, highly dispersed Pt nano-clusters were contained within the zeolite crystal's voids, as ascertained by 2D pressure-jump IR spectroscopy of adsorbed CO and focussed ion-beam transmission electron microscopy. The shape-selective properties of the Pt/ZSM-5 catalysts were evaluated in the partial hydrogenation of soybean oil. Unique hydrogenation selectivities were observed, as the fatty acids located at the central position of the triacylglycerol (TAG) molecules were preferentially hydrogenated. The resulting oil has therefore high levels of intermediately melting TAGs, which are compatible with biolubricants due to their improved oxidative stability and still appropriate low-temperature fluidity. The TAG distribution in the partially hydrogenated soybean oil samples was independent from the zeolite crystal size, while the hydrogenation activity linearly increases with the crystal's external surface area. This trend was confirmed with a Pt loaded mesoporous ZSM-5 zeolite, obtained via a mild alkaline treatment. These observations imply and confirm a genuine pore mouth catalysis mechanism, in which only one fatty acid chain of the TAG is able to enter the micropores of ZSM-5, where the double bonds are hydrogenated by the crystal encapsulated Pt-clusters.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000374790200031	Publication Date	2016-03-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2044-4753	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.773	Times cited	5	Open Access
	Notes	The research was funded through a PhD grant to J. V. A. of the Agency for Innovation by Science and Technology in Flanders (IWT). A. P. and D. V. acknowledge the F. W. O.-Vlaanderen (Research Foundation Flanders) for a post-doctoral fellowship. E. B. was kindly funded by an F. W. O.-Vlaanderen project. This work was performed in the framework of an Associated International Laboratory between FWO and CNRS.			Approved	Most recent IF: 5.773
	Call Number	EMAT @ emat @ c:irua:138981			Serial	4335
Permanent link to this record



	Author	Ding, L.; Sapanathan, T.; Schryvers, D.; Simar, A.; Idrissi, H.
	Title	On the formation of antiphase boundaries in Fe₄Al₁₃ intermetallics during a high temperature treatment			Type	A1 Journal article
	Year	2022	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	215	Issue		Pages	114726-6
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	In this paper, we report atomic scale observations and formation mechanisms of a high-density of antiphase boundaries (APBs) within an ultra-fine-grained Fe4Al13 intermetallic layer at an Al/steel interface after a heat treatment at 596 degrees C. The results reveal that the APBs are formed by nucleation and the glide of partial dislocations with Burgers vector of b/3[010] (b = 12.47 angstrom). The intensive activation of APBs locally transforms the Fe4Al13 structure from the quasicrystal approximant structure to a quasicrystal. Very few stacking faults and nanotwins are observed indicating that the formation of planar defects is mainly driven by this transformation. This new insight on the formation of high density of APBs could possibly lead to an improvement in toughness by increasing the strength/ductility balance of this intermetallic.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000800016600003	Publication Date	2022-04-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 6
	Call Number	UA @ admin @ c:irua:188644			Serial	7088
Permanent link to this record



	Author	Yang, T.; Kong, Y.; Du, Y.; Li, K.; Schryvers, D.
	Title	Discovery of core-shell quasicrystalline particles			Type	A1 Journal article
	Year	2023	Publication	Scripta materialia	Abbreviated Journal
	Volume	222	Issue		Pages	115040-115046
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Submicron-sized quasicrystalline particles were obtained in an Al-Zn-Mg-Cu alloy produced by traditional melting. These particles consist of an Al-Fe-Ni core and a Mg-Cu-Zn shell and were found to be stable and embedded randomly in the Al matrix. The diffraction patterns of these core-shell particles reveal a decagonal core and an icosahedral shell with, respectively, ten- and five-fold axes aligned. High resolution scanning transmission electron microscopy of the Mg-Cu-Zn shell confirms the five-fold symmetry atomic arrangement and the icosahedral structure. It can therefore be concluded that Fe and Ni impurities play an important role in mediating the formation of such an unusual ternary core-shell quasicrystalline particle. These findings provide some novel insights in the formation of quasicrystals in traditional industrial Al alloys.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000864491400005	Publication Date	2022-09-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 6; 2023 IF: 3.747
	Call Number	UA @ admin @ c:irua:191489			Serial	7144
Permanent link to this record



	Author	Tian, H.; Schryvers, D.; Liu, D.; Jiang, Q.; van Humbeeck, J.
	Title	Stability of Ni in nitinol oxide surfaces			Type	A1 Journal article
	Year	2011	Publication	Acta biomaterialia	Abbreviated Journal	Acta Biomater
	Volume	7	Issue	2	Pages	892-899
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The stability of Ni in titanium oxide surface layers on nitinol wires known to release certain amounts of Ni was investigated by first principles density functional theory and transmission electron microscopy. The oxides were identified as a combination of TiO and TiO2 depending on the thickness of the layer. The calculations indicate that free Ni atoms can exist in TiO at ambient temperature while Ni particles form in TiO2, which was confirmed by the transmission electron microscopy observations. The results are discussed with respect to surface stability and Ni release due to free Ni atoms and Ni particles.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	S.l.	Editor
	Language		Wos	000286707700047	Publication Date	2010-09-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1742-7061;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.319	Times cited	39	Open Access
	Notes	Fwo			Approved	Most recent IF: 6.319; 2011 IF: 4.865
	Call Number	UA @ lucian @ c:irua:85998			Serial	3128
Permanent link to this record



	Author	Bartholomeeusen, E.; De Cremer, G.; Kennes, K.; Hammond, C.; Hermans, I.; Lu, J.-B.; Schryvers, D.; Jacobs, P.A.; Roeffaers, M.B.J.; Hofkens, J.; Sels, B.F.; Coutino-Gonzalez, E.
	Title	Optical encoding of luminescent carbon nanodots in confined spaces			Type	A1 Journal article
	Year	2021	Publication	Chemical Communications	Abbreviated Journal	Chem Commun
	Volume	57	Issue	90	Pages	11952-11955
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Stable emissive carbon nanodots were generated in zeolite crystals using near infrared photon irradiation gradually converting the occluded organic template, originally used to synthesize the zeolite crystals, into discrete luminescent species consisting of nano-sized carbogenic fluorophores, as ascertained using Raman microscopy, and steady-state and time-resolved spectroscopic techniques. Photoactivation in a confocal laser fluorescence microscope allows 3D resolved writing of luminescent carbon nanodot patterns inside zeolites providing a cost-effective and non-toxic alternative to previously reported metal-based nanoclusters confined in zeolites, and opens up opportunities in bio-labelling and sensing applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000711122000001	Publication Date	2021-10-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-7345; 1364-548x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.319	Times cited		Open Access	Not_Open_Access
	Notes				Approved	Most recent IF: 6.319
	Call Number	UA @ admin @ c:irua:184147			Serial	6876
Permanent link to this record



	Author	Samaee, V.; Sandfeld, S.; Idrissi, H.; Groten, J.; Pardoen, T.; Schwaiger, R.; Schryvers, D.
	Title	Dislocation structures and the role of grain boundaries in cyclically deformed Ni micropillars			Type	A1 Journal article
	Year	2020	Publication	Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing	Abbreviated Journal	Mat Sci Eng A-Struct
	Volume	769	Issue		Pages	138295
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Transmission electron microscopy and finite element-based dislocation simulations were combined to study the development of dislocation microstructures after cyclic deformation of single crystal and bicrystal Ni micropillars oriented for multi-slip. A direct correlation between large accumulation of plastic strain and the presence of dislocation cell walls in the single crystal micropillars was observed, while the presence of the grain boundary hampered the formation of wall-like structures in agreement with a smaller accumulated plastic strain. Automated crystallographic orientation and nanostrain mapping using transmission electron microscopy revealed the presence of lattice heterogeneities associated to the cell walls including long range elastic strain fields. By combining the nanostrain mapping with an inverse modelling approach, information about dislocation density, line orientation and Burgers vector direction was derived, which is not accessible otherwise in such dense dislocation structures. Simulations showed that the image forces associated with the grain boundary in this specific bicrystal configuration have only a minor influence on dislocation behavior. Thus, the reduced occurrence of “mature” cell walls in the bicrystal can be attributed to the available volume, which is too small to accommodate cell structures.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000500373800018	Publication Date	2019-08-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-5093	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.4	Times cited	1	Open Access	OpenAccess
	Notes	Financial support from the Flemish (FWO) and German Research Foundation (DFG) through the European M-ERA.NET project “FaSS” (Fatigue Simulation near Surfaces) under the grant numbers GA.014.13 N,SCHW855/5-1, and SA2292/2-1 is gratefully acknowledged. V.S. acknowledges the FWO research project G012012 N “Understanding nanocrystalline mechanical behaviour from structural investigations”. H.I. is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). S.S. acknowledges financial support from the European Research Council through the ERC Grant Agreement No. 759419 (MuDiLingo – A Multiscale Dislocation Language for Data- Driven Materials Science).			Approved	Most recent IF: 6.4; 2020 IF: 3.094
	Call Number	EMAT @ emat @c:irua:163475			Serial	5371
Permanent link to this record



	Author	Yang, M.; Chen, H.; Orekhov, A.; Lu, Q.; Lan, X.; Li, K.; Zhang, S.; Song, M.; Kong, Y.; Schryvers, D.; Du, Y.
	Title	Quantified contribution of β″ and β′ precipitates to the strengthening of an aged Al–Mg–Si alloy			Type	A1 Journal article
	Year	2020	Publication	Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing	Abbreviated Journal	Mat Sci Eng A-Struct
	Volume	774	Issue		Pages	138776
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	It is generally believed that β00 precipitates, rather than β0 precipitates, are the major strengthening precipitates in aged Al–Mg–Si alloys. The reason for this difference is not well understood. To clarify this, two samples of the same Al–Mg–Si alloy but with different aging states were prepared. The under-aged sample only contains nanoprecipitates of the β00 type, while the peak-aged one contains nearly equal volumes of β00 and β0 precipitates. We have, for the first time, separated the strengthening effect of the contribution from βʺ and βʹ precipitates, respectively, by an indirect approach based on high-precision measurements of volume fractions, number densities, sizes, proportions of the precipitates, their lattice strains, the composition and grain size of the matrix. The β0 precipitates, which take 45.6% of the total precipitate volume in the peak-aged sample, contribute to the entire precipitation strengthening by only 31.6%. The main reason why they are less useful compared to β00 precipitates has been found to be associated with their smaller lattice strains relative to the matrix, which is 0.99% versus 2.10% (for β00 ).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000514747200001	Publication Date	2019-12-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-5093	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.4	Times cited		Open Access	OpenAccess
	Notes	National Natural Science Foundation of China, 51531009 51711530713 51501230 ; Central South University, 2018gczd033 ; Flemish Science Foundation, VS.026.18N ; Program for Guangdong Introducing Innovative and Entrepreneurial Teams, 2016ZT06G025 ; Guangdong Natural Science Foundation, 2017B030306014 ;			Approved	Most recent IF: 6.4; 2020 IF: 3.094
	Call Number	EMAT @ emat @c:irua:165290			Serial	5440
Permanent link to this record



	Author	Hamon, A.-L.; Verbeeck, J.; Schryvers, D.; Benedikt, J.; van den Sanden, R.M.C.M.
	Title	ELNES study of carbon K-edge spectra of plasma deposited carbon films			Type	A1 Journal article
	Year	2004	Publication	Journal of materials chemistry	Abbreviated Journal	J Mater Chem
	Volume	14	Issue		Pages	2030-2035
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Electron energy loss spectroscopy was used to investigate the bonding of plasma deposited carbon films. The experimental conditions include the use of a specific collection angle for which the shape of the spectra is free of the orientation dependency usually encountered in graphite due to its anisotropic structure. The first quantification process of the energy loss near-edge structure was performed by a standard fit of the collected spectrum, corrected for background and multiple scattering, with three Gaussian functions followed by a comparison with the graphite spectrum obtained under equivalent experimental conditions. In a second approach a fitting model directly incorporating the background subtraction and multiple scattering removal was applied. The final numerical results are interpreted in view of the deposition conditions of the films and the actual fitting procedure with the related choice of parameters.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000222312500017	Publication Date	2004-06-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0959-9428;1364-5501;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.626	Times cited	61	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:48782UA @ admin @ c:irua:48782			Serial	1025
Permanent link to this record



	Author	Bervoets, A.R.J.; Behets, G.J.; Schryvers, D.; Roels, F.; Yang, Z.; Verberckmoes, S.C.; Damment, S.J.P.; Dauwe, S.; Mubiana, V.K.; Blust, R.; de Broe, M.E.; d' Haese, P.C.
	Title	Hepatocellular transport and gastrointestinal absorption of lanthanum in chronic renal failure			Type	A1 Journal article
	Year	2009	Publication	Kidney international	Abbreviated Journal	Kidney Int
	Volume	75	Issue		Pages	389-398
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Pathophysiology
	Abstract	Lanthanum carbonate is a new phosphate binder that is poorly absorbed from the gastrointestinal tract and eliminated largely by the liver. After oral treatment, we and others had noticed 23 fold higher lanthanum levels in the livers of rats with chronic renal failure compared to rats with normal renal function. Here we studied the kinetics and tissue distribution, absorption, and subcellular localization of lanthanum in the liver using transmission electron microscopy, electron energy loss spectrometry, and X-ray fluoresence. We found that in the liver lanthanum was located in lysosomes and in the biliary canal but not in any other cellular organelles. This suggests that lanthanum is transported and eliminated by the liver via a transcellular, endosomal-lysosomal-biliary canicular transport route. Feeding rats with chronic renal failure orally with lanthanum resulted in a doubling of the liver levels compared to rats with normal renal function, but the serum levels were similar in both animal groups. These levels plateaued after 6 weeks at a concentration below 3 g/g in both groups. When lanthanum was administered intravenously, thereby bypassing the gastrointestinal tract-portal vein pathway, no difference in liver levels was found between rats with and without renal failure. This suggests that there is an increased gastrointestinal permeability or absorption of oral lanthanum in uremia. Lanthanum levels in the brain and heart fluctuated near its detection limit with long-term treatment (20 weeks) having no effect on organ weight, liver enzyme activities, or liver histology. We suggest that the kinetics of lanthanum in the liver are consistent with a transcellular transport pathway, with higher levels in the liver of uremic rats due to higher intestinal absorption.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000263145800009	Publication Date	2008-12-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0085-2538;1523-1755;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.395	Times cited	29	Open Access
	Notes	Fwo; Iwt			Approved	Most recent IF: 8.395; 2009 IF: 6.193
	Call Number	UA @ lucian @ c:irua:72290			Serial	1417
Permanent link to this record



	Author	Shabalovskaya, S.A.; Tian, H.; Anderegg, J.W.; Schryvers, D.U.; Carroll, W.U.; van Humbeeck, J.
	Title	The influence of surface oxides on the distribution and release of nickel from Nitinol wires			Type	A1 Journal article
	Year	2009	Publication	Biomaterials	Abbreviated Journal	Biomaterials
	Volume	30	Issue	4	Pages	468-477
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The patterns of Ni release from Nitinol vary depending on the type of material (NiTi alloys with low or no processing versus commercial wires or sheets). A thick TiO2 layer generated on the wire surface during processing is often considered as a reliable barrier against Ni release. The present study of Nitinol wires with surface oxides resulting from production was conducted to identify the sources of Ni release and its distribution in the surface sublayers. The chemistry and topography of the surfaces of Nitinol wires drawn using different techniques were studied with XPS and SEM. The distribution of Ni into surface depth and the surface oxide thickness were evaluated using Auger spectroscopy, TEM with FIB and ELNES. Ni release was estimated using either ICPA or AAS. Potentiodynamic potential polarization of selected wires was performed in as-received state with no strain and in treated strained samples. Wire samples in the as-received state showed low breakdown potentials (200 mV); the improved corrosion resistance of these wires after treatment was not affected by strain. It is shown how processing techniques affect surface topography, chemistry and also Ni release. Nitinol wires with the thickest surface oxide TiO2 (up to 720 nm) showed the highest Ni release, attributed to the presence of particles of essentially pure Ni whose number and size increased while approaching the interface between the surface and the bulk. The biological implications of high and lasting Ni release are also discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Guildford	Editor
	Language		Wos	000262065500006	Publication Date	2008-11-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0142-9612;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.402	Times cited	102	Open Access
	Notes	Fwo; G.0465.05			Approved	Most recent IF: 8.402; 2009 IF: 7.365
	Call Number	UA @ lucian @ c:irua:72320			Serial	1641
Permanent link to this record



	Author	Cautaerts, N.; Delville, R.; Stergar, E.; Pakarinen, J.; Verwerft, M.; Yang, Y.; Hofer, C.; Schnitzer, R.; Lamm, S.; Felfer, P.; Schryvers, D.
	Title	The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study			Type	A1 Journal article
	Year	2020	Publication	Acta Materialia	Abbreviated Journal	Acta Mater
	Volume	197	Issue		Pages	184-197
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	This work encompasses an in-depth transmission electron microscopy and atom probe tomography study of Ti-stabilized austenitic steel irradiated with Fe-ions. The focus is on radiation induced segregation and precipitation, and in particular on how Ti and TiC affect these processes. A 15-15Ti steel (grade: DIN 1.4970) in two thermo-mechanical states (cold-worked and aged) was irradiated at different temperatures up to a dose of 40 dpa. At low irradiation temperatures, the cold-worked and aged materials evolved to a similar microstructure dominated by small Si and Ni clusters, corresponding to segregation to small point defect clusters. TiC precipitates, initially present in the aged material, were found to be unstable under these irradiation conditions. Elevated irradiation temperatures resulted in the nucleation of nanometer sized Cr enriched TiC precipitates surrounded by Si and Ni enriched shells. In addition, nanometer sized Ti- and Mn-enriched G-phase (M6Ni16Si7) precipitates formed, often attached to TiC precipitates. Post irradiation, larger number densities of TiC were observed in the cold-worked material compared to the aged material. This was correlated with a lower volume fraction of G-phase. The findings suggest that at elevated irradiation temperatures, the precipitate-matrix interface is an important point defect sink and contributes to the improved radiation resistance of this material. The study is a first of its kind on stabilized steel and demonstrates the significance of the small Ti addition to the evolution of the microstructure under irradiation. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000564767000001	Publication Date	2020-07-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.4	Times cited		Open Access	Not_Open_Access
	Notes	; This work was supported by ENGIE [contract number 2015-AC-007 e BSUEZ6900]; the U.S. Department of Energy, Office of Nuclear Energy under DOE Idaho Operations Office Contract DE-AC07051D14517 as part of a Nuclear Science User Facilities experiment; and by the MYRRHA program at SCK-CEN, Belgium. Funding of the Austrian BMK (846933) in the framework of the program “Production of the future” and the “BMK Professorship for Industry” is gratefully acknowledged. We want to thank the staffat MIBL for assisting with the ion irradiations as well as the staffat CAES for assisting with FIB work and conducting APT measurements. ;			Approved	Most recent IF: 9.4; 2020 IF: 5.301
	Call Number	UA @ admin @ c:irua:171956			Serial	6626
Permanent link to this record



	Author	Idrissi, H.; Béché, A.; Gauquelin, N.; Ul-Haq, I.; Bollinger, C.; Demouchy, S.; Verbeeck, J.; Pardoen, T.; Schryvers, D.; Cordier, P.
	Title	On the formation mechanisms of intragranular shear bands in olivine by stress-induced amorphization			Type	A1 Journal article
	Year	2022	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	239	Issue		Pages	118247-118249
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Intragranular amorphization shear lamellae are found in deformed olivine aggregates. The detailed trans-mission electron microscopy analysis of intragranular lamella arrested in the core of a grain provides novel information on the amorphization mechanism. The deformation field is complex and heteroge-neous, corresponding to a shear crack type instability involving mode I, II and III loading components. The formation and propagation of the amorphous lamella is accompanied by the formation of crystal defects ahead of the tip. These defects are geometrically necessary [001] dislocations, characteristics of high-stress deformation in olivine, and rotational nanodomains which are tentatively interpreted as disclinations. We show that these defects play an important role in dictating the path followed by the amorphous lamella. Stress-induced amorphization in olivine would thus result from a direct crystal-to -amorphous transformation associated with a shear instability and not from a mechanical destabilization due to the accumulation of high number of defects from an intense preliminary deformation. The pref-erential alignment of some lamellae along (010) is a proof of the lower ultimate mechanical strength of these planes.(c) 2022 The Authors. Published by Elsevier Ltd on behalf of Acta Materialia Inc. This is an open access article under the CC BY license ( http://creativecommons.org/licenses/by/4.0/ )
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000861076600004	Publication Date	2022-08-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.4	Times cited	5	Open Access	OpenAccess
	Notes	The QuanTEM microscope was partially funded by the Flemish government. The K2 camera was funded by FWO Hercules fund G0H4316N 'Direct electron detector for soft matter TEM'. A. Beche acknowledges funding from FWO project G093417N ('Compressed sensing enabling low dose imaging in transmission electron microscopy'). H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). This work was supported by the FNRS under Grant PDR – T011322F and by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme under grant agreement No 787,198 Time Man. J-L Rouviere is acknowledged for his support with the GPA softawre.			Approved	Most recent IF: 9.4
	Call Number	UA @ admin @ c:irua:191432			Serial	7186
Permanent link to this record



	Author	Tian, H.; Schryvers, D.; Claeys, P.
	Title	Nanodiamonds do not provide unique evidence for a Younger Dryas impact			Type	A1 Journal article
	Year	2011	Publication	Proceedings of the National Academy of Sciences of the United States of America	Abbreviated Journal	P Natl Acad Sci Usa
	Volume	108	Issue	1	Pages	40-44
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Microstructural, δ13C isotope and C/N ratio investigations were conducted on excavated material from the black Younger Dryas boundary in Lommel, Belgium, aiming for a characterisation of the carbon content and structures. Cubic diamond nanoparticles are found in large numbers. The larger ones with diameters around or above 10 nm often exhibit single or multiple twins. The smaller ones around 5 nm in diameter are mostly defect-free. Also larger flake-like particles, around 100 nm in lateral dimension, with a cubic diamond structure are observed as well as large carbon onion structures. The combination of these characteristics does not yield unique evidence for an exogenic impact related to the investigated layer.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000285915000012	Publication Date	2010-12-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0027-8424;1091-6490;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.661	Times cited	32	Open Access
	Notes				Approved	Most recent IF: 9.661; 2011 IF: 9.681
	Call Number	UA @ lucian @ c:irua:88733			Serial	2254
Permanent link to this record



	Author	Ding, L.; Zhao, M.; Ehlers, F.J.H.; Jia, Z.; Zhang, Z.; Weng, Y.; Schryvers, D.; Liu, Q.; Idrissi, H.
	Title	“Branched” structural transformation of the L12-Al3Zr phase manipulated by Cu substitution/segregation in the Al-Cu-Zr alloy system			Type	A1 Journal Article
	Year	2024	Publication	Journal of materials science & technology	Abbreviated Journal	Journal of Materials Science & Technology
	Volume	185	Issue		Pages	186-206
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The effect of Cu on the evolution of the Al3Zr phase in an Al-Cu-Zr cast alloy during solution treatment at 500 °C has been thoroughly studied by combining atomic resolution high-angle annular dark-field scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy and first-principles cal- culations. The heat treatment initially produces a pure L12-Al3Zr microstructure, allowing for about 13 % Cu to be incorporated in the dispersoid. Cu incorporation increases the energy barrier for anti-phase boundary (APB) activation, thus stabilizing the L12 structure. Additional heating leads to a Cu-induced “branched”path for the L12 structural transformation, with the latter process accelerated once the first APB has been created. Cu atoms may either (i) be repelled by the APBs, promoting the transformation to a Cu-poor D023 phase, or (ii) they may segregate at one Al-Zr layer adjacent to the APB, promoting a transformation to a new thermodynamically favored phase, Al4CuZr, formed when these segregation layers are periodically arranged. Theoretical studies suggest that the branching of the L12 transformation path is linked to the speed at which an APB is created, with Cu attraction triggered by a comparatively slow process. This unexpected transformation behavior of the L12-Al3Zr phase opens a new path to understanding, and potentially regulating the Al3Zr dispersoid evolution for high temperature applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001154261100001	Publication Date	2023-12-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1005-0302	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	10.9	Times cited		Open Access	Not_Open_Access
	Notes	This work was supported by the National Key Research and Development Program (No. 2020YFA0405900), the National Natural Science Foundation of China (Grant No. 52371111 and U2141215 ), the Natural Science Foundation of Jiangsu Province (No. BE2022159 ). We are grateful to the High Performance Computing Center of Nanjing Tech University for supporting the computational resources. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR- FNRS).			Approved	Most recent IF: 10.9; 2024 IF: 2.764
	Call Number	EMAT @ emat @c:irua:202392			Serial	8981
Permanent link to this record



	Author	Colla, M.-S.; Amin-Ahmadi, B.; Idrissi, H.; Malet, L.; Godet, S.; Raskin, J.-P.; Schryvers, D.; Pardoen, T.
	Title	Dislocation-mediated relaxation in nanograined columnar palladium films revealed by on-chip time-resolved HRTEM testing			Type	A1 Journal article
	Year	2015	Publication	Nature communications	Abbreviated Journal	Nat Commun
	Volume	6	Issue	6	Pages	5922
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The high-rate sensitivity of nanostructured metallic materials demonstrated in the recent literature is related to the predominance of thermally activated deformation mechanisms favoured by a large density of internal interfaces. Here we report time-resolved high-resolution electron transmission microscopy creep tests on thin nanograined films using on-chip nanomechanical testing. Tests are performed on palladium, which exhibited unexpectedly large creep rates at room temperature. Despite the small 30-nm grain size, relaxation is found to be mediated by dislocation mechanisms. The dislocations interact with the growth nanotwins present in the grains, leading to a loss of coherency of twin boundaries. The density of stored dislocations first increases with applied deformation, and then decreases with time to drive additional deformation while no grain boundary mechanism is observed. This fast relaxation constitutes a key issue in the development of various micro- and nanotechnologies such as palladium membranes for hydrogen applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000348742300002	Publication Date	2015-01-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2041-1723;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.124	Times cited	34	Open Access
	Notes	Iap7/21; Fwo G012012n			Approved	Most recent IF: 12.124; 2015 IF: 11.470
	Call Number	c:irua:122045			Serial	731
Permanent link to this record



	Author	Gonnissen, J.; Batuk, D.; Nataf, G.F.; Jones, L.; Abakumov, A.M.; Van Aert, S.; Schryvers, D.; Salje, E.K.H.
	Title	Direct Observation of Ferroelectric Domain Walls in LiNbO₃: Wall-Meanders, Kinks, and Local Electric Charges			Type	A1 Journal article
	Year	2016	Publication	Advanced functional materials	Abbreviated Journal	Adv Funct Mater
	Volume	26	Issue	26	Pages	7599-7604
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Direct observations of the ferroelectric domain boundaries in LiNbO3 are performed using high-resolution high-angle annular dark field scanning transmission electron microscopy imaging, revealing a very narrow width of the domain wall between the 180° domains. The domain walls demonstrate local side-way meandering, which results in inclinations even when the overall wall orientation follows the ferroelectric polarization. These local meanders contain kinks with “head-to-head” and “tail-to-tail” dipolar configurations and are therefore locally charged. The charged meanders are confined to a few cation layers along the polarization direction and are separated by longer stretches of straight domain walls.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000388166700006	Publication Date	2016-09-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1616-301X	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.124	Times cited	23	Open Access
	Notes	J.G. acknowledges the support from the Research Foundation Flanders (FWO, Belgium) through various project fundings (G.0368.15N, G.0369.15N, and G.0374.13N), as well as the financial support from the European Union Seventh Framework Program (FP7/2007–2013) under Grant agreement no. 312483 (ESTEEM2). The authors thank J. Hadermann for useful suggestions on the interpretation of the HAADFSTEM images. E.K.H.S. thanks the EPSRC (EP/K009702/1) and the Leverhulme Trust (EM-2016-004) for support. G.F.N. thanks the National Research Fund, Luxembourg (FNR/P12/4853155/Kreisel) for support.; esteem2_jra2			Approved	Most recent IF: 12.124
	Call Number	c:irua:135336 c:irua:135336			Serial	4129
Permanent link to this record