NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	31–60 of 102 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 >>

List View

Citations

Details

	Records
	Author	Ban, V.; Soloninin, A.V.; Skripov, A.V.; Hadermann, J.; Abakumov, A.; Filinchuk, Y.
	Title	Pressure-Collapsed Amorphous Mg(BH4)(2): An Ultradense Complex Hydride Showing a Reversible Transition to the Porous Framework			Type	A1 Journal article
	Year	2014	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	118	Issue	40	Pages	23402-23408
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Hydrogen-storage properties of complex hydrides depend of their form, such as a polymorphic form or an eutectic mixture. This Paper reports on an easy and reproducible way to synthesize a new stable form of magnesium borohydride by pressure-induced collapse of the porous gamma-Mg(BH4)(2). This amorphous complex hydride was investigated by temperature-programmed synchrotron X-ray diffraction (SXRD), transmission electron microscopy (TEM), thermogravimetric analysis, differential scanning calorimetry analysis, and Raman spectroscopy, and the dynamics of the BH4 reorientation was studied by spinlattice relaxation NMR spectroscopy. No long-range order is observed in the lattice region by Raman spectroscopy, while the internal vibration modes of the BH4 groups are the same as in the crystalline state. A hump at 4.9 angstrom in the SXRD pattern suggests the presence of nearly linear MgBH4 Mg fragments constituting all the known crystalline polymorphs of Mg(BH4)(2), which are essentially frameworks built of tetrahedral Mg nodes and linear BH4 linkers. TEM shows that the pressure-collapsed phase is amorphous down to the nanoscale, but surprisingly, SXRD reveals a transition at similar to 90 degrees C from the dense amorphous state (density of 0.98 g/cm(3)) back to the porous ? phase having only 0.55 g/cm(3) crystal density. The crystallization is slightly exothermic, with the enthalpy of -4.3 kJ/mol. The volumetric hydrogen density of the amorphous form is 145 g/L, one of the highest among hydrides. Remarkably, this form of Mg(BH4)2 has different reactivity compared to the crystalline forms. The parameters of the reorientational motion of BH4 groups in the amorphous Mg(BH4)(2) found from NMR measurements differ significantly from those in the known crystalline forms. The behavior of the nuclear spinlattice relaxation rates can be described in terms of a Gaussian distribution of the activation energies centered on 234 +/- 9 meV with the dispersion of 100 +/- 10 meV.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000343016800067	Publication Date	2014-09-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	23	Open Access
	Notes				Approved	Most recent IF: 4.536; 2014 IF: 4.772
	Call Number	UA @ lucian @ c:irua:121113			Serial	2711
Permanent link to this record



	Author	Nematollahi, P.; Neyts, E.C.
	Title	Linking bi-metal distribution patterns in porous carbon nitride fullerene to its catalytic activity toward gas adsorption			Type	A1 Journal article
	Year	2021	Publication	Nanomaterials	Abbreviated Journal	Nanomaterials-Basel
	Volume	11	Issue	7	Pages	1794
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Immobilization of two single transition metal (TM) atoms on a substrate host opens numerous possibilities for catalyst design. If the substrate contains more than one vacancy site, the combination of TMs along with their distribution patterns becomes a design parameter potentially complementary to the substrate itself and the bi-metal composition. By means of DFT calculations, we modeled three dissimilar bi-metal atoms (Ti, Mn, and Cu) doped into the six porphyrin-like cavities of porous C24N24 fullerene, considering different bi-metal distribution patterns for each binary complex, viz. TixCuz@C24N24, TixMny@C24N24, and MnyCuz@C24N24 (with x, y, z = 0-6). We elucidate whether controlling the distribution of bi-metal atoms into the C24N24 cavities can alter their catalytic activity toward CO2, NO2, H-2, and N-2 gas capture. Interestingly, Ti2Mn4@C24N24 and Ti2Cu4@C24N24 complexes showed the highest activity and selectively toward gas capture. Our findings provide useful information for further design of novel few-atom carbon-nitride-based catalysts.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000676140500001	Publication Date	2021-07-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2079-4991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.553	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 3.553
	Call Number	UA @ admin @ c:irua:180372			Serial	8174
Permanent link to this record



	Author	Aerts, R.; Martens, T.; Bogaerts, A.
	Title	Influence of vibrational states on CO₂ splitting by dielectric barrier discharges			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	44	Pages	23257-23273
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, the splitting of CO2 in a pulsed plasma system, such as a dielectric barrier discharge (DBD), is evaluated from a chemical point of view by means of numerical modeling. For this purpose, a chemical reaction set of CO2 in an atmospheric pressure plasma is developed, including the vibrational states of CO2, O2, and CO. The simulated pulses are matched to the conditions of a filament (or microdischarge) and repeated with intervals of 1 μs. The influence of vibrationally excited CO2 as well as other neutral species, ions, and electrons on the CO2 splitting is discussed. Our calculations predict that the electrons have the largest contribution to the CO2 splitting at the conditions under study, by electron impact dissociation. The contribution of vibrationally excited CO2 levels in the splitting of CO2 is found be 6.4%, when only considering one microdischarge pulse and its afterglow, but it can be much higher for consecutive discharge pulses, as is typical for a filamentary DBD, when the interpulse time is short enough and accumulation effects in the vibrationally excited CO2 densities can occur.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000310769300012	Publication Date	2012-10-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	112	Open Access
	Notes				Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:101764			Serial	1659
Permanent link to this record



	Author	Liao, T.-W.; Verbruggen, S.; Claes, N.; Yadav, A.; Grandjean, D.; Bals, S.; Lievens, P.
	Title	TiO2 Films Modified with Au Nanoclusters as Self-Cleaning Surfaces under Visible Light			Type	A1 Journal article
	Year	2018	Publication	Nanomaterials	Abbreviated Journal	Nanomaterials-Basel
	Volume	8	Issue	8	Pages	30
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	In this study, we applied cluster beam deposition (CBD) as a new approach for fabricating efficient plasmon-based photocatalytic materials. Au nanoclusters (AuNCs) produced in the gas phase were deposited on TiO2 P25-coated silicon wafers with coverage ranging from 2 to 8 atomic monolayer (ML) equivalents. Scanning Electron Microscopy (SEM) images of the AuNCs modified TiO2 P25 films show that the surface is uniformly covered by the AuNCs that remain isolated at low coverage (2 ML, 4 ML) and aggregate at higher coverage (8 ML). A clear relationship between AuNCs coverage and photocatalytic activity towards stearic acid photo-oxidation was measured, both under ultraviolet and green light illumination. TiO2 P25 covered with 4 ML AuNCs showed the best stearic acid photo-oxidation performance under green light illumination (Formal Quantum Efficiency 1.6 x 10-6 over a period of 93 h). These results demonstrate the large potential of gas-phase AuNCs beam deposition technology for the fabrication of visible light active plasmonic photocatalysts.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000424131600030	Publication Date	2018-01-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2079-4991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.553	Times cited	29	Open Access	OpenAccess
	Notes	The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n 607417 (Catsense). We also thank the Research Foundation—Flanders (FWO, Belgium), the Flemish Concerted Action (BOF KU Leuven, Project No. GOA/14/007) research program, and the microscope was partly funded by the Hercules Fund from the Flemish Government for the support. N.C. and S.B. acknowledge financial support from European Research Council (ERC Starting Grant #335078-COLOURATOM). ECAS_Sara (ROMEO:green; preprint:; postprint:can ; pdfversion:can);			Approved	Most recent IF: 3.553
	Call Number	EMAT @ emat @c:irua:147898UA @ admin @ c:irua:147898			Serial	4805
Permanent link to this record



	Author	Filippousi, M.; Angelakeris, M.; Katsikini, M.; Paloura, E.; Efthimiopoulos, I.; Wang, Y.; Zamboulis, D.; Van Tendeloo, G.
	Title	Surfactant effects on the structural and magnetic properties of iron oxide nanoparticles			Type	A1 Journal article
	Year	2014	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	118	Issue	29	Pages	16209-16217
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Iron oxide nanoparticles were prepared using the simplest and most efficient chemical route, the coprecipitation, in the absence and the presence of three different and widely used surfactants. The purpose of this study is to investigate the possible influence of the different surfactants on the structure and therefore on the magnetic properties of the iron oxide nanoparticles. Thus, different techniques were employed in order to elucidate the composition and structure of the magnetic iron oxide nanoparticles. By combining transmission electron microscopy with X-ray powder diffraction and X-ray absorption fine structure measurements, we were able to determine and confirm the crystal structure of the constituent iron oxides. The magnetic properties were investigated by measuring the hysteresis loops where the surfactant influence on their collective magnetic behavior and subsequent AC magnetic hyperthermia response is apparent. The results indicate that the produced iron oxide nanoparticles may be considered as good candidates for biomedical applications in hyperthermia treatments because of their high heating capacity exhibited under an alternating magnetic field, which is sufficient to provoke damage to the cancer cells.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000339540700073	Publication Date	2014-07-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	47	Open Access
	Notes	European Research Council under the seventh Framework Program (FP7); ERC Grant No. 246791 – COUNTATOMS; IAP-AIP functional Supramolecular structure IUAP P7/05			Approved	Most recent IF: 4.536; 2014 IF: 4.772
	Call Number	UA @ lucian @ c:irua:118129			Serial	3398
Permanent link to this record



	Author	Berthelot, A.; Bogaerts, A.
	Title	Modeling of CO₂Splitting in a Microwave Plasma: How to Improve the Conversion and Energy Efficiency			Type	A1 Journal article
	Year	2017	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	121	Issue	121	Pages	8236-8251
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Microwave plasmas are one of the most promising techniques for CO2 conversion into value-added chemicals and fuels since they are very energy efficient. Nevertheless, experiments show that this high energy efficiency is only reached at low pressures and significantly drops toward atmospheric pressure, which is a clear limitation for industrial applications. In this paper, we use a zerodimensional reaction kinetics model to simulate a CO2 microwave plasma in a pressure range from 50 mbar to 1 bar, in order to evaluate the reasons for this decrease in energy efficiency at atmospheric pressure. The code includes a detailed description of the vibrational kinetics of CO2, CO, and O2 as well as the energy exchanges between them because the vibrational kinetics is known to be crucial for energy efficient CO2 splitting. First, we use a self-consistent gas temperature calculation in order to assess the key performance indicators for CO2 splitting, i.e., the CO2 conversion and corresponding energy efficiency. Our results indicate that lower pressures and higher power densities lead to more vibrational excitation, which is beneficial for the conversion. We also demonstrate the key role of the gas temperature. The model predicts the highest conversion and energy efficiencies at pressures around 300 mbar, which is in agreement with experiments from the literature. We also show the beneficial aspect of fast gas cooling in the afterglow at high pressure. In a second step, we study in more detail the effects of pressure, gas temperature, and power density on the vibrational distribution function and on the dissociation and recombination mechanisms of CO2, which define the CO2 splitting efficiency. This study allows us to identify the limiting factors of CO2 conversion and to propose potential solutions to improve the process.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000400039300002	Publication Date	2017-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	47	Open Access	OpenAccess
	Notes	Federaal Wetenschapsbeleid;			Approved	Most recent IF: 4.536
	Call Number	PLASMANT @ plasmant @ c:irua:142809			Serial	4567
Permanent link to this record



	Author	Nayuk, R.; Zacher, D.; Schweins, R.; Wiktor, C.; Fischer, R.A.; Van Tendeloo, G.; Huber, K.
	Title	Modulated formation of MOF-5 nanoparticles : a SANS analysis			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	10	Pages	6127-6135
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	MOF-5 nanoparticles were prepared by mixing a solution of [Zn4O(C6H5COO)(6)] with a solution of benzene-1,4-dicarboxylic acid in DMF at ambient conditions. The former species mimics as a secondary building unit (SBU), and the latter acts as linker. Mixing of the two solutions induced the formation of MOF-5 nanoparticles in dilute suspension. The applied conditions were identified as suitable for a closer investigation of the particle formation process by combined light and small angle neutron scattering (SANS). Scattering analysis revealed a significant impact of the molar ratio of the two components in the reaction mixture. Excessive use of the building unit slowed down the process. A similar effect was observed upon addition of 4n-decylbenzoic acid, which is supposed to act as a modulator. The formation mechanism leads to initial intermediates, which turn into cubelike nanoparticles with a diameter of about 60-80 nm. This initial stage is followed by an extended formation period, where nucleation proceeds over hours, leading to an increasing number of nanoparticles with the same final size of 60-80 nm.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000301509600020	Publication Date	2012-02-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	24	Open Access
	Notes				Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:97789			Serial	2163
Permanent link to this record



	Author	Verlackt, C.C.W.; Van Boxem, W.; Dewaele, D.; Lemière, F.; Sobott, F.; Benedikt, J.; Neyts, E.C.; Bogaerts, A.
	Title	Mechanisms of Peptide Oxidation by Hydroxyl Radicals: Insight at the Molecular Scale			Type	A1 Journal article
	Year	2017	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	121	Issue	121	Pages	5787-5799
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Molecular dynamics (MD) simulations were performed to provide atomic scale insight in the initial interaction between hydroxyl radicals (OH) and peptide systems in solution. These OH radicals are representative reactive oxygen species produced by cold atmospheric plasmas. The use of plasma for biomedical applications is gaining increasing interest, but the fundamental mechanisms behind the plasma modifications still remain largely elusive. This study helps to gain more insight in the underlying mechanisms of plasma medicine but is also more generally applicable to peptide oxidation, of interest for other applications. Combining both reactive and nonreactive MD simulations, we are able to elucidate the reactivity of the amino acids inside the peptide systems and their effect on their structure up to 1 μs. Additionally, experiments were performed, treating the simulated peptides with a plasma jet. The computational results presented here correlate well with the obtained experimental data and highlight the importance of the chemical environment for the reactivity of the individual amino acids, so that specific amino acids are attacked in higher numbers than expected. Furthermore, the long time scale simulations suggest that a single oxidation has an effect on the 3D conformation due to an increase in hydrophilicity and intra- and intermolecular interactions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000396969900037	Publication Date	2017-03-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	5	Open Access	OpenAccess
	Notes	Fonds Wetenschappelijk Onderzoek, G012413N ;			Approved	Most recent IF: 4.536
	Call Number	PLASMANT @ plasmant @ c:irua:142202			Serial	4537
Permanent link to this record



	Author	Neyts, E.C.; Bogaerts, A.
	Title	Numerical study of the size-dependent melting mechanisms of nickel nanoclusters			Type	A1 Journal article
	Year	2009	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	113	Issue	7	Pages	2771-2776
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Molecular dynamics simulations were used to investigate the size-dependent melting mechanism of nickel nanoclusters of various sizes. The melting process was monitored by the caloric curve, the overall cluster Lindemann index, and the atomic Lindemann index. Size-dependent melting temperatures were determined, and the correct linear dependence on inverse diameter was recovered. We found that the melting mechanism gradually changes from dynamic coexistence melting to surface melting with increasing cluster size. These findings are of importance in better understanding carbon nanotube growth by catalytic chemical vapor deposition as the phase state of the catalyst nanoparticle codetermines the growth mechanism.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited		Open Access
	Notes				Approved	Most recent IF: 4.536; 2009 IF: 4.224
	Call Number	UA @ lucian @ c:irua:76495			Serial	2410
Permanent link to this record



	Author	Kavak, S.; Kadu, A.A.; Claes, N.; Sánchez-Iglesias, A.; Liz-Marzán, L.M.; Batenburg, K.J.; Bals, S.
	Title	Quantitative 3D Investigation of Nanoparticle Assemblies by Volumetric Segmentation of Electron Tomography Data Sets			Type	A1 Journal article
	Year	2023	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal
	Volume	127	Issue	20	Pages	9725-9734
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Morphological characterization of nanoparticle assemblies and hybrid nanomaterials is critical in determining their structure-property relationships as well as in the development of structures with desired properties. Electron tomography has become a widely utilized technique for the three-dimensional characterization of nanoparticle assemblies. However, the extraction of quantitative morphological parameters from the reconstructed volume can be a complex and labor-intensive task. In this study, we aim to overcome this challenge by automating the volumetric segmentation process applied to three-dimensional reconstructions of nanoparticle assemblies. The key to enabling automated characterization is to assess the performance of different volumetric segmentation methods in accurately extracting predefined quantitative descriptors for morphological characterization. In our methodology, we compare the quantitative descriptors obtained through manual segmentation with those obtained through automated segmentation methods, to evaluate their accuracy and effectiveness. To show generality, our study focuses on the characterization of assemblies of CdSe/CdS quantum dots, gold nanospheres and CdSe/CdS encapsulated in polymeric micelles, and silica-coated gold nanorods decorated with both CdSe/CdS or PbS quantum dots. We use two unsupervised segmentation algorithms: the watershed transform and the spherical Hough transform. Our results demonstrate that the choice of automated segmentation method is crucial for accurately extracting the predefined quantitative descriptors. Specifically, the spherical Hough transform exhibits superior performance in accurately extracting quantitative descriptors, such as particle size and interparticle distance, thereby allowing for an objective, efficient, and reliable volumetric segmentation of complex nanoparticle assemblies.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000991752700001	Publication Date	2023-05-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.7	Times cited	2	Open Access	OpenAccess
	Notes	Fonds Wetenschappelijk Onderzoek, 1181122N ; Horizon 2020 Framework Programme, 861950 ; H2020 European Research Council, 815128 ;			Approved	Most recent IF: 3.7; 2023 IF: 4.536
	Call Number	EMAT @ emat @c:irua:196971			Serial	8793
Permanent link to this record



	Author	dela Encarnacion, C.; Lenzi, E.; Henriksen-Lacey, M.; Molina, B.; Jenkinson, K.; Herrero, A.; Colas, L.; Ramos-Cabrer, P.; Toro-Mendoza, J.; Orue, I.; Langer, J.; Bals, S.; Jimenez de Aberasturi, D.; Liz-Marzan, L.M.
	Title	Hybrid magnetic-plasmonic nanoparticle probes for multimodal bioimaging			Type	A1 Journal article
	Year	2022	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	126	Issue	45	Pages	19519-19531
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Multimodal contrast agents, which take advantage of different imaging modalities, have emerged as an interesting approach to overcome the technical limitations of individual techniques. We developed hybrid nanoparticles comprising an iron oxide core and an outer gold spiky layer, stabilized by a biocompatible polymeric shell. The combined magnetic and optical properties of the different components provide the required functionalities for magnetic resonance imaging (MRI), surface-enhanced Raman scattering (SERS), and fluorescence imaging. The fabrication of such hybrid nanoprobes comprised the adsorption of small gold nanoparticles onto premade iron oxide cores, followed by controlled growth of spiky gold shells. The gold layer thickness and branching degree (tip sharpness) can be controlled by modifying both the density of Au nanoparticle seeds on the iron oxide cores and the subsequent nanostar growth conditions. We additionally demonstrated the performance of these hybrid multifunctional nanoparticles as multimodal contrast agents for correlative imaging of in vitro cell models and ex vivo tissues.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000883021700001	Publication Date	2022-11-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447; 1932-7455	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.7	Times cited	10	Open Access	Not_Open_Access
	Notes	The authors acknowledge financial support from the European Research Council (ERC-AdG-2017, 787510) and MCIN/AEI/10.13039/501100011033 through grants PID2019-108854RA-I00 and Maria de Maeztu Unit of Excellence No. MDM-2017-0720. S.B. and K.J. acknowledge financial support from the European Commission under the Horizon 2020Programme by Grant No. 823717 (ESTEEM3) and ERC Consolidator Grant No. 815128 (REALNANO) .			Approved	Most recent IF: 3.7
	Call Number	UA @ admin @ c:irua:192104			Serial	7311
Permanent link to this record



	Author	Berthold, T.; Castro, C.R.; Winter, M.; Hoerpel, G.; Kurttepeli, M.; Bals, S.; Antonietti, M.; Fechler, N.
	Title	Tunable nitrogen-doped carbon nanoparticles from tannic acid and urea and their potential for sustainable soots			Type	A1 Journal article
	Year	2017	Publication	ChemNanoMat : chemistry of nanomaterials for energy, biology and more	Abbreviated Journal	Chemnanomat
	Volume	3	Issue	3	Pages	311-318
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Nano-sized nitrogen-doped carbon spheres are synthesized from two cheap, readily available and sustainable precursors: tannic acid and urea. In combination with a polymer structuring agent, nitrogen content, sphere size and the surface (up to 400 m(2)g(-1)) can be conveniently tuned by the precursor ratio, temperature and structuring agent content. Because the chosen precursors allow simple oven synthesis and avoid harsh conditions, this carbon nanosphere platform offers a more sustainable alternative to classical soots, for example, as printing pigments or conduction soots. The carbon spheres are demonstrated to be a promising as conductive carbon additive in anode materials for lithium ion batteries.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000403299200006	Publication Date	2017-03-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2199-692x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.937	Times cited	14	Open Access	OpenAccess
	Notes	; S.B. is grateful for funding by the European Research Council (ERC starting grant # 335078-COLOURATOMS). ; ecas_Sara			Approved	Most recent IF: 2.937
	Call Number	UA @ lucian @ c:irua:144287UA @ admin @ c:irua:144287			Serial	4699
Permanent link to this record



	Author	Cavaliere, E.; Benetti, G.; Van Bael, M.; Winckelmans, N.; Bals, S.; Gavioli, L.
	Title	Exploring the Optical and Morphological Properties of Ag and Ag/TiO2 Nanocomposites Grown by Supersonic Cluster Beam Deposition			Type	A1 Journal article
	Year	2017	Publication	Nanomaterials	Abbreviated Journal	Nanomaterials-Basel
	Volume	7	Issue	7	Pages	442
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Nanocomposite systems and nanoparticle (NP) films are crucial for many applications and research fields. The structure-properties correlation raises complex questions due to the collective structure of these systems, often granular and porous, a crucial factor impacting their effectiveness and performance. In this framework, we investigate the optical and morphological properties of Ag nanoparticles (NPs) films and of Ag NPs/TiO₂ porous matrix films, one-step grown by supersonic cluster beam deposition. Morphology and structure of the Ag NPs film and of the Ag/TiO₂ (Ag/Ti 50-50) nanocomposite are related to the optical properties of the film employing spectroscopic ellipsometry (SE). We employ a simple Bruggeman effective medium approximation model, corrected by finite size effects of the nano-objects in the film structure to gather information on the structure and morphology of the nanocomposites, in particular porosity and average NPs size for the Ag/TiO₂ NP film. Our results suggest that SE is a simple, quick and effective method to measure porosity of nanoscale films and systems, where standard methods for measuring pore sizes might not be applicable.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000419186800037	Publication Date	2017-12-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2079-4991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.553	Times cited	19	Open Access	OpenAccess
	Notes	The authors thank Gabriele Ferrini for fruitful discussions on the spectroscopic ellipsometry model and Francesco Rossella from NEST for the optical profilometry data. The authors acknowledge financial support from the European Union through the 7th Framework Program (FP7) under a contract for an Integrated Infrastructure Initiative (Reference No. 312483 ESTEEM2). Luca Gavioli, Emanuele Cavaliere and Giulio Benetti acknowledge support from Università Cattolica del Sacro Cuore through D.1.1 and D.3.1 grants.			Approved	Most recent IF: 3.553
	Call Number	EMAT @ emat @c:irua:147862UA @ admin @ c:irua:147862			Serial	4802
Permanent link to this record



	Author	Naberezhnyi, D.; Rumyantseva, M.; Filatova, D.; Batuk, M.; Hadermann, J.; Baranchikov, A.; Khmelevsky, N.; Aksenenko, A.; Konstantinova, E.; Gaskov, A.
	Title	Effects of Ag additive in low temperature CO detection with In₂O₃ based gas sensors			Type	A1 Journal article
	Year	2018	Publication	Nanomaterials	Abbreviated Journal
	Volume	8	Issue	10	Pages	801
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Nanocomposites In2O3/Ag obtained by ultraviolet (UV) photoreduction and impregnation methods were studied as materials for CO sensors operating in the temperature range 25-250 degrees C. Nanocrystalline In2O3 and In2O3/Ag nanocomposites were characterized by X-ray diffraction (XRD), single-point Brunauer-Emmet-Teller (BET) method, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) with energy dispersive X-ray (EDX) mapping. The active surface sites were investigated using Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR) spectroscopy and thermo-programmed reduction with hydrogen (TPR-H-2) method. Sensor measurements in the presence of 15 ppm CO demonstrated that UV treatment leads to a complete loss of In2O3 sensor sensitivity, while In2O3/Ag-UV nanocomposite synthesized by UV photoreduction demonstrates an increased sensor signal to CO at T < 200 degrees C. The observed high sensor response of the In2O3/Ag-UV nanocomposite at room temperature may be due to the realization of an additional mechanism of CO oxidation with participation of surface hydroxyl groups associated via hydrogen bonds.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000451174100057	Publication Date	2018-10-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2079-4991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:156335			Serial	7842
Permanent link to this record



	Author	Kelchtermans, A.; Adriaensens, P.; Slocombe, D.; Kuznetsov, V.L.; Hadermann, J.; Riskin, A.; Elen, K.; Edwards, P.P.; Hardy, A.; Van Bael, M.K.
	Title	Increasing the solubility limit for tetrahedral aluminium in ZnO:Al nanorods by variation in synthesis parameters			Type	A1 Journal article
	Year	2015	Publication	Journal of nanomaterials	Abbreviated Journal	J Nanomater
	Volume	2015	Issue	2015	Pages	1-8
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Nanocrystalline ZnO:Al nanoparticles are suitable building blocks for transparent conductive layers. As the concentration of substitutional tetrahedral Al is an important factor for improving conductivity, here we aim to increase the fraction of substitutional Al. To this end, synthesis parameters of a solvothermal reaction yielding ZnO:Al nanorods were varied. A unique set of complementary techniques was combined to reveal the exact position of the aluminium ions in the ZnO lattice and demonstrated its importance in order to evaluate the potential of ZnO:Al nanocrystals as optimal building blocks for solution deposited transparent conductive oxide layers. Both an extension of the solvothermal reaction time and stirring during solvothermal treatment result in a higher total tetrahedral aluminium content in the ZnO lattice. However, only the longer solvothermal treatment effectively results in an increase of the substitutional positions aimed for.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000358516300001	Publication Date	2015-07-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1687-4110;1687-4129;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.871	Times cited	2	Open Access
	Notes	FWO; Methusalem			Approved	Most recent IF: 1.871; 2015 IF: 1.644
	Call Number	c:irua:124426			Serial	1600
Permanent link to this record



	Author	Shenderova, O.; Koscheev, A.; Zaripov, N.; Petrov, I.; Skryabin, Y.; Detkov, P.; Turner, S.; Van Tendeloo, G.
	Title	Surface chemistry and properties of ozone-purified detonation nanodiamonds			Type	A1 Journal article
	Year	2011	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	115	Issue	20	Pages	9827-9837
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Nanodiamond from ozone purification (NDO) demonstrates very distinctive properties within the class of detonation nanodiamonds, namely very high acidity and high colloidal stability in a broad pH range. To understand the origin of these unusual properties of NDO, the nature of the surface functional groups formed during detonation soot oxidation by ozone needs to be revealed. In this work, thermal desorption mass spectrometry (TDMS) and IR spectroscopy were used for the identification of surface groups and it was concluded that carboxylic anhydride groups prevail on the NDO surface. On the basis of the temperature profiles of the desorbed volatile products and their mass balance, it is hypothesized that decomposition of carboxylic anhydride groups from NDO during heating proceeds by two different mechanisms. Other distinctive features of NDO in comparison with air-treated nanodiamond are also reported.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000290652200001	Publication Date	2011-04-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	105	Open Access
	Notes	Esteem 026019; Fwo			Approved	Most recent IF: 4.536; 2011 IF: 4.805
	Call Number	UA @ lucian @ c:irua:89556			Serial	3394
Permanent link to this record



	Author	Tarasov, A.; Hu, Z.-Y.; Meledina, M.; Trusov, G.; Goodilin, E.; Van Tendeloo, G.; Dobrovolsky, Y.
	Title	One-Step Microheterogeneous Formation of Rutile@Anatase Core–Shell Nanostructured Microspheres Discovered by Precise Phase Mapping			Type	A1 Journal article
	Year	2017	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	121	Issue	121	Pages	4443-4450
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Nanostructured core−shell microspheres with a rough rutile core and a thin anatase shell are synthesized via a one-step heterogeneous templated hydrolysis process of TiCl4 vapor on the aerosol water−air interface. The rutile-in-anatase core−shell structure has been evidenced by different electron microscopy techniques, including electron energy-loss spectroscopy and 3D electron tomography. A new mechanism for the formation of a crystalline rutile core inside the anatase shell is proposed based on a statistical evaluation of a large number of electron microscopy data. We found that the control over the TiCl4 vapor pressure, the ratio between TiCl4 and H2O aerosol, and the reaction conditions plays a crucial role in the formation of the core−shell morphology and increases the yield of nanostructured microspheres.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000395616200038	Publication Date	2017-03-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	4	Open Access	OpenAccess
	Notes	Z.-Y.H., M. M., and G.V.T. acknowledge support from the the EC Framework 7 program ESTEEM2 (Reference 312483).			Approved	Most recent IF: 4.536
	Call Number	EMAT @ emat @ c:irua:141720			Serial	4472
Permanent link to this record



	Author	Vermeiren, V.; Bogaerts, A.
	Title	Improving the Energy Efficiency of CO₂Conversion in Nonequilibrium Plasmas through Pulsing			Type	A1 Journal article
	Year	2019	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	123	Issue	29	Pages	17650-17665
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Nonequilibrium plasmas oﬀer a pathway for energy-eﬃcient CO2 conversion through vibrationally induced dissociation. However, the eﬃciency of this pathway is limited by a rise in gas temperature, which increases vibrational−translational (VT) relaxation and quenches the vibrational levels. Therefore, we investigate here the eﬀect of plasma pulsing on the VT nonequilibrium and on the CO2 conversion by means of a zerodimensional chemical kinetics model, with self-consistent gas temperature calculation. Speciﬁcally, we show that higher energy eﬃciencies can be reached by correctly tuning the plasma pulse and interpulse times. The ideal plasma pulse time corresponds to the time needed to reach the highest vibrational temperature. In addition, the highest energy eﬃciencies are obtained with long interpulse times, that is, ≥0.1 s, in which the gas temperature can entirely drop to room temperature. Furthermore, additional cooling of the reactor walls can give higher energy eﬃciencies at shorter interpulse times of 1 ms. Finally, our model shows that plasma pulsing can signiﬁcantly improve the energy eﬃciency at low reduced electric ﬁelds (50 and 100 Td, typical for microwave and gliding arc plasmas) and intermediate ionization degrees (5 × 10−7 and 10−6).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000477785000003	Publication Date	2019-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	1	Open Access
	Notes	Fonds Wetenschappelijk Onderzoek, G.0383.16N ; This research was supported by the FWO project (grant G.0383.16N). The calculations were performed using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen (UAntwerpen), a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI), and the UAntwerpen. We also like to thank N. Britun (ChIPS) for the interesting discussions.			Approved	Most recent IF: 4.536
	Call Number	PLASMANT @ plasmant @c:irua:161621			Serial	5289
Permanent link to this record



	Author	Yusupov, M.; Bogaerts, A.; Huygh, S.; Snoeckx, R.; van Duin, A.C.T.; Neyts, E.C.
	Title	Plasma-induced destruction of bacterial cell wall components : a reactive molecular dynamics simulation			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	117	Issue	11	Pages	5993-5998
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Nonthermal atmospheric pressure plasmas are gaining increasing attention for biomedical applications. However, very little fundamental information on the interaction mechanisms between the plasma species and biological cells is currently available. We investigate the interaction of important plasma species, such as OH, H2O2, O, O3, as well as O2 and H2O, with bacterial peptidoglycan by means of reactive molecular dynamics simulations, aiming for a better understanding of plasma disinfection. Our results show that OH, O, O3, and H2O2 can break structurally important bonds of peptidoglycan (i.e., CO, CN, or CC bonds), which consequently leads to the destruction of the bacterial cell wall. The mechanisms behind these breakups are, however, dependent on the impinging plasma species, and this also determines the effectiveness of the cell wall destruction.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000316773000056	Publication Date	2013-02-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	59	Open Access
	Notes				Approved	Most recent IF: 4.536; 2013 IF: 4.835
	Call Number	UA @ lucian @ c:irua:107154			Serial	2636
Permanent link to this record



	Author	Bal, K.M.; Neyts, E.C.
	Title	Overcoming Old Scaling Relations and Establishing New Correlations in Catalytic Surface Chemistry: Combined Effect of Charging and Doping			Type	A1 Journal article
	Year	2019	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	123	Issue	10	Pages	6141-6147
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Optimization of catalytic materials for a given application is greatly constrained by linear scaling relations. Recently, however, it has been demonstrated that it is possible to reversibly modulate the chemisorption of molecules on nanomaterials by charging (i.e., injection or removal of electrons) and hence reversibly and selectively modify catalytic activity beyond structure−activity correlations. The fundamental physical relation between the properties of the material, the charging process, and the chemisorption energy, however, remains unclear, and a systematic exploration and optimization of charge-switchable sorbent materials is not yet possible. Using hybrid DFT calculations of CO2 chemisorption on hexagonal boron nitride nanosheets with several types of defects and dopants, we here reveal the existence of fundamental correlations between the electron aﬃnity of a material and charge-induced chemisorption, show how defect engineering can be used to modulate the strength and eﬃciency of the adsorption process, and demonstrate that excess electrons stabilize many topological defects. We then show how these insights could be exploited in the development of new electrocatalytic materials and the synthesis of doped nanomaterials. Moreover, we demonstrate that calculated chemical properties of charged materials are highly sensitive to the employed computational methodology because of the self-interaction error, which underlines the theoretical challenge posed by such systems.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000461537400035	Publication Date	2019-03-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	5	Open Access	Not_Open_Access: Available from 21.02.2020
	Notes	Fonds Wetenschappelijk Onderzoek, 11V8915N ;			Approved	Most recent IF: 4.536
	Call Number	PLASMANT @ plasmant @UA @ admin @ c:irua:158117			Serial	5160
Permanent link to this record



	Author	Alyörük, M.M.; Aierken, Y.; Çakır, D.; Peeters, F.M.; Sevik, C.
	Title	Promising Piezoelectric Performance of Single Layer Transition-Metal Dichalcogenides and Dioxides			Type	A1 Journal article
	Year	2015	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	119	Issue	119	Pages	23231-23237
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT)
	Abstract	Piezoelectricity is a unique material property that allows one to convert mechanical energy into electrical one or vice versa. Transition metal dichalcogenides (TMDC) and transition metal dioxides (TMDO) are expected to have great potential for piezoelectric device applications due to their noncentrosymmetric and two-dimensional crystal structure. A detailed theoretical investigation of the piezoelectric stress (e 11 ) and piezoelectric strain (d 11 ) coefficients of single layer TMDCs and TMDOs with chemical formula MX 2 (where M= Cr, Mo, W, Ti, Zr, Hf, Sn and X = O, S, Se, Te) is presented by using first-principles calculations based on density func- tional theory. We predict that not only the Mo- and W-based members of this family but also the other materials with M= Cr, Ti, Zr and Sn exhibit highly promising piezoelectric properties. CrTe 2 has the largest e 11 and d 11 coefficients among the group VI elements (i.e., Cr, Mo, and W). In addition, the relaxed-ion e 11 and d 11 coefficients of SnS 2 are almost the same as those of CrTe 2 . Furthermore, TiO 2 and ZrO 2 pose comparable or even larger e 11 coefficients as compared to Mo- and W-based TMDCs and TMDOs. Our calculations reveal that TMDC and TMDO structures are strong candidates for future atomically thin piezoelectric applications such as transducers, sensors, and energy harvesting devices due to their piezoelectric coefficients that are comparable (even larger) to currently used bulk piezoelectric materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000362702100054	Publication Date	2015-09-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	134	Open Access
	Notes	M.M.A and C.S. acknowledges the support from Scientific and Technological Research Council of Turkey (TUBITAK- 113F333). C.S. acknowledges support from Anadolu University (BAP-1407F335, -1505F200), and Turkish Academy of Sciences (TUBA-GEBIP). Computational resources were provided by TUBITAK ULAKBIM, High Performance and Grid Computing Center (TR-Grid e-Infrastructure), and HPC infrastructure of the University of Antwerp (CalcUA) a division of the Flemish Supercomputer Center (VSC), which is funded by the Hercules foundation.			Approved	Most recent IF: 4.536; 2015 IF: 4.772
	Call Number	c:irua:129418			Serial	4035
Permanent link to this record



	Author	Zhang, Y.-R.; Neyts, E.C.; Bogaerts, A.
	Title	Influence of the Material Dielectric Constant on Plasma Generation inside Catalyst Pores			Type	A1 Journal article
	Year	2016	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	120	Issue	120	Pages	25923-25934
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Plasma catalysis is gaining increasing interest for various environmental applications, but the crucial question is whether plasma can be created inside catalyst pores and under which conditions. In practice, various catalytic support materials are used, with various dielectric constants. We investigate here the influence of the dielectric constant on the plasma properties inside catalyst pores and in the sheath in front of the pores, for various pore sizes. The calculations are performed by a two-dimensional fluid model for an atmospheric pressure dielectric barrier discharge in helium. The electron impact ionization rate, electron temperature, electron and ion density, as well as the potential distribution and surface charge density, are analyzed for a better understanding of the discharge behavior inside catalyst pores. The results indicate that, in a 100 μm pore, the electron impact ionization in the pore, which is characteristic for the plasma generation inside the pore, is greatly enhanced for dielectric constants below 300. Smaller pore sizes only yield enhanced ionization for smaller dielectric constants, i.e., up to εr = 200, 150, and 50 for pore sizes of 50, 30, and 10 μm. Thus, the most common catalyst supports, i.e., Al2O3 and SiO2, which have dielectric constants around εr = 8−11 and 4.2, respectively, should allow more easily that microdischarges can be formed inside catalyst pores, even for smaller pore sizes. On the other hand, ferroelectric materials with dielectric constants above 300 never seem to yield plasma enhancement inside catalyst pores, not even for 100 μm pore sizes. Furthermore, it is clear that the dielectric constant of the material has a large effect on the extent of plasma enhancement inside the catalyst pores, especially in the range between εr = 4 and εr = 200. The obtained results are explained in detail based on the surface charge density at the pore walls, and the potential distribution and electron temperature inside and above the pores. The results obtained with this model are important for plasma catalysis, as the production plasma species in catalyst pores might affect the catalyst properties, and thus improve the applications of plasma catalysis.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000388429100029	Publication Date	2016-11-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	34	Open Access
	Notes	This work was supported by the Fund for Scientific Research Flanders (FWO) (Grant G.0217.14N), the National Natural Science Foundation of China (Grant 11405019), and the China Postdoctoral Science Foundation (Grant 2015T80244). This work was carried out in part using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI), and the University of Antwerp.			Approved	Most recent IF: 4.536
	Call Number	PLASMANT @ plasmant @ c:irua:138602			Serial	4319
Permanent link to this record



	Author	Buffière, M.; Zaghi, A.E.; Lenaers, N.; Batuk, M.; Khelifi, S.; Drijkoningen, J.; Hamon, J.; Stesmans, A.; Kepa, J.; Afanas’ev, V.V.; Hadermann, J.; D’Haen, J.; Manca, J.; Vleugels, J.; Meuris, M.; Poortmans, J.;
	Title	Effect of binder content in Cu-In-Se precursor ink on the physical and electrical properties of printed CuInSe₂ solar cells			Type	A1 Journal article
	Year	2014	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	118	Issue	47	Pages	27201-27209
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Printed chalcopyrite thin films have attracted considerable attention in recent years due to their potential in the high-throughput production of photovoltaic devices. To improve the homogeneity of printed CuInSe2 (CISe) layers, chemical additives such as binder can be added to the precursor ink. In this contribution, we investigate the influence of the dicyandiamide (DCDA) content, used as a binder in the precursor ink, on the physical and electrical properties of printed CISe solar cells. It is shown that the use of the binder leads to a dense absorber, composed of large CISe grains close to the surface, while the bulk of the layer consists of CISe crystallites embedded in a CuxS particle based matrix, resulting from the limited sintering of the precursor in this region. The expected additional carbon contamination of the CISe layer due to the addition of the binder appears to be limited, and the optical properties of the CISe layer are similar to the reference sample without additive. The electrical characterization of the corresponding CISe/CdS solar cells shows a degradation of the efficiency of the devices, due to a modification in the predominant recombination mechanisms and a limitation of the space charge region width when using the binder; both effects could be explained by the inhomogeneity of the bulk of the CISe absorber and high defect density at the CISe/CuxS-based matrix interface.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000345722400003	Publication Date	2014-11-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	4	Open Access
	Notes				Approved	Most recent IF: 4.536; 2014 IF: 4.772
	Call Number	UA @ lucian @ c:irua:121332			Serial	801
Permanent link to this record



	Author	Sirotina, A.P.; Callaert, C.; Volykhov, A.A.; Frolov, A.S.; Sanchez-Barriga, J.; Knop-Gericke, A.; Hadermann, J.; Yashina, L.V.
	Title	Mechanistic studies of gas reactions with multicomponent solids : what can we learn by combining NAP XPS and atomic resolution STEM/EDX?			Type	A1 Journal article
	Year	2019	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	123	Issue	43	Pages	26201-26210
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Rapid development of experimental techniques has enabled real time studies of solid gas reactions at the level reaching the atomic scale. In the present paper, we focus on a combination of atomic resolution STEM/EDX, which visualizes the reaction zone, and near ambient pressure (NAP) XPS, which collects information for a surface layer of variable thickness under reaction conditions. We compare the behavior of two affined topological insulators, Bi2Te3 and Sb2Te3. We used a simple reaction with molecular oxygen occurring at 298 K, which is of practical importance to avoid material degradation. Despite certain limitations, a combination of in situ XPS and ex situ cross-sectional STEM/EDX allowed us to obtain a self-consistent picture of the solid gas reaction mechanism for oxidation of Sb2Te3 and Bi2Te3 crystals, which includes component redistribution between the oxide and the subsurface layer and Te segregation with formation of a thin ordered layer at the interface. The process is multistep in case of both compounds. At the very beginning of the oxidation process the reactivity is determined by the energy benefit of the corresponding element oxygen bond formation. Further in the oxidation process, the behavior of these two compounds becomes similar and features component redistribution between the oxide and the subsurface layer.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000493865700019	Publication Date	2019-10-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447; 1932-7455	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited		Open Access
	Notes				Approved	Most recent IF: 4.536
	Call Number	UA @ admin @ c:irua:164664			Serial	6310
Permanent link to this record



	Author	Jafarzadeh, A.; Bal, K.M.; Bogaerts, A.; Neyts, E.C.
	Title	CO₂ activation on TiO₂-supported Cu₅ and Ni₅ nanoclusters : effect of plasma-induced surface charging			Type	A1 Journal article
	Year	2019	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	123	Issue	11	Pages	6516-6525
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Surface charging is an often overlooked factor in many plasma-surface interactions and in particular in plasma catalysis. In this study, we investigate the effect of excess electrons induced by a plasma on the adsorption properties of CO2 on titania-supported Cu-5 and Ni-5 clusters using spin-polarized and dispersion-corrected density functional theory calculations. The effect of excess electrons on the adsorption of Ni and Cu pentamers as well as on CO2 adsorption on a pristine anatase TiO2(101) slab is studied. Our results indicate that adding plasma-induced excess electrons to the system leads to further stabilization of the bent CO2 structure. Also, dissociation of CO2 on charged clusters is energetically more favorable than on neutral clusters. We hypothesize that surface charge is a plausible cause for the synergistic effects sometimes observed in plasma catalysis.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000462260700024	Publication Date	2019-02-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447; 1932-7455	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	4	Open Access	OpenAccess
	Notes				Approved	Most recent IF: 4.536
	Call Number	UA @ admin @ c:irua:159422			Serial	5281
Permanent link to this record



	Author	Goris, B.; Guzzinati, G.; Fernández-López, C.; Pérez-Juste, J.; Liz-Marzán, L.M.; Trügler, A.; Hohenester, U.; Verbeeck, J.; Bals, S.; Van Tendeloo, G.
	Title	Plasmon mapping in Au@Ag nanocube assemblies			Type	A1 Journal article
	Year	2014	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	118	Issue	28	Pages	15356-15362
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Surface plasmon modes in metallic nanostructures largely determine their optoelectronic properties. Such plasmon modes can be manipulated by changing the morphology of the nanoparticles or by bringing plasmonic nanoparticle building blocks close to each other within organized assemblies. We report the EELS mapping of such plasmon modes in pure Ag nanocubes, Au@Ag coreshell nanocubes, and arrays of Au@Ag nanocubes. We show that these arrays enable the creation of interesting plasmonic structures starting from elementary building blocks. Special attention will be dedicated to the plasmon modes in a triangular array formed by three nanocubes. Because of hybridization, a combination of such nanotriangles is shown to provide an antenna effect, resulting in strong electrical field enhancement at the narrow gap between the nanotriangles.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000339368700031	Publication Date	2014-06-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	41	Open Access	OpenAccess
	Notes	Fwo; 246791 Countatoms; 278510 Vortex; 335078 Colouratom; 262348 Esmi ECASJO;; ECASSara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 4.536; 2014 IF: 4.772
	Call Number	UA @ lucian @ c:irua:118099UA @ admin @ c:irua:118099			Serial	2644
Permanent link to this record



	Author	Drăgan, A.-M.; Feier, B.G.; Tertis, M.; Bodoki, E.; Truta, F.; Stefan, M.-G.; Kiss, B.; Van Durme, F.; De Wael, K.; Oprean, R.; Cristea, C.
	Title	Forensic analysis of synthetic cathinones on nanomaterials-based platforms : chemometric-assisted voltametric and UPLC-MS/MS investigation			Type	A1 Journal article
	Year	2023	Publication	Nanomaterials	Abbreviated Journal
	Volume	13	Issue	17	Pages	2393-19
	Keywords	A1 Journal article; Engineering sciences. Technology; Antwerp Electrochemical and Analytical Sciences Lab (A-Sense Lab)
	Abstract	Synthetic cathinones (SCs) are a group of new psychoactive substances often referred to as “legal highs” or “bath salts”, being characterized by a dynamic change, new compounds continuously emerging on the market. This creates a lack of fast screening tests, making SCs a constant concern for law enforcement agencies. Herein, we present a fast and simple method for the detection of four SCs (alpha-pyrrolidinovalerophenone, N-ethylhexedrone, 4-chloroethcathinone, and 3-chloromethcathinone) based on their electrochemical profiles in a decentralized manner. In this regard, the voltametric characterization of the SCs was performed by cyclic and square wave voltammetry. The elucidation of the SCs redox pathways was successfully achieved using liquid chromatography coupled to (tandem) mass spectrometry. For the rational identification of the ideal experimental conditions, chemometric data processing was employed, considering two critical qualitative and quantitative variables: the type of the electrochemical platform and the pH of the electrolyte. The analytical figures of merit were determined on standard working solutions using the optimized method, which exhibited wide linear ranges and LODs suitable for confiscated sample screening. Finally, the performance of the method was evaluated on real confiscated samples, the resulting validation parameters being similar to those obtained with another portable device (i.e., Raman spectrometer).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001061205100001	Publication Date	2023-08-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2079-4991	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	5.3	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 5.3; 2023 IF: 3.553
	Call Number	UA @ admin @ c:irua:199221			Serial	8869
Permanent link to this record



	Author	Huygh, S.; Neyts, E.C.
	Title	Adsorption of C and CH_x radicals on anatase (001) and the influence of oxygen vacancies			Type	A1 Journal article
	Year	2015	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	119	Issue	119	Pages	4908-4921
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The adsorption of C and CHx radicals on anatase (001) was studied using DFT within the generalized gradient approximation using the Perde-Burke-Ernzerhof (PBE) functional. We have studied the influence of oxygen vacancies in and at the surface on the adsorption properties of the radicals. For the oxygen vacancies in anatase (001), the most stable vacancy is located at the surface. For this vacancy, the maximal adsorption strength of C and CH decreases compared to the adsorption on the stoichiometric surface, but it increases for CH2 and CH3. If an oxygen vacancy is present in the first subsurface layer, the maximal adsorption strength increases for C, CH, CH2, and CH3. When the vacancy is present in the next subsurface layer, we find that only the CH3 adsorption is enhanced, while the maximal adsorption energies for the other radical species decrease. Not only does the precise location of the oxygen vacancy determine the maximal adsorption interaction, it also influences the adsorption strengths of the radicals at different surface configurations. This determines the probability of finding a certain adsorption configuration at the surface, which in turn influences the possible surface reactions. We find that C preferentially adsorbs far away from the oxygen vacancy, while CH2 and CH3 adsorb preferentially at the oxygen vacancy site. A fraction of CH partially adsorbs at the oxygen vacancy, and another fraction adsorbs further away from the vacancy.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000350840700052	Publication Date	2015-02-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	13	Open Access
	Notes				Approved	Most recent IF: 4.536; 2015 IF: 4.772
	Call Number	c:irua:124909			Serial	63
Permanent link to this record



	Author	Somers, W.; Bogaerts, A.; van Duin, A.C.T.; Neyts, E.C.
	Title	Plasma species interacting with nickel surfaces : toward an atomic scale understanding of plasma-catalysis			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	39	Pages	20958-20965
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The adsorption probability and reaction behavior of CHx plasma species on various nickel catalyst surfaces is investigated by means of reactive molecular dynamics (MD) simulations using the ReaxFF potential. Such catalysts are used in the reforming of hydrocarbons and in the growth of carbon nanotubes, and further insight in the underlying mechanisms of these processes is needed to increase their applicability. Single and consecutive impacts of CHx radicals (x={1,2,3}) were performed on four different Ni surfaces, at a temperature of 400 K. The adsorption probability is shown to be related to the number of free electrons, i.e. a higher number leads to more adsorptions, and the steric hindrance caused by the hydrogen atoms bonded to the impacting CHx species. Furthermore, some of the CH bonds break after adsorption, which generally leads to diffusion of the hydrogen atom over the surface. Additionally, these adsorbed H-atoms can be used in reactions to form new molecules, such as CH4 and C2Hx, although this is dependent on the precise morphology of the surface. New molecules are also formed by subtraction of H-atoms from adsorbed radicals, leading to occasional formation of H2 and C2Hx molecules.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000309375700040	Publication Date	2012-09-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	37	Open Access
	Notes				Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:101522			Serial	2640
Permanent link to this record



	Author	Huygh, S.; Bogaerts, A.; Neyts, E.C.
	Title	How Oxygen Vacancies Activate CO₂ Dissociation on TiO₂ Anatase (001)			Type	A1 Journal article
	Year	2016	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	120	Issue	120	Pages	21659-21669
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The adsorption, dissociation, and diffusion of CO2 on the anatase (001) surface was studied using DFT by means of the generalized gradient approximation using the Perdew−Burcke−Ernzerhof (PBE)-functional and applying corrections for long-range dispersion interactions. Different stable adsorption configurations were identified for the fully oxidized surface. The most stable adsorption configuration is the monodentated carbonate-like structure. Small energy barriers were identified for the conversion of a physisorbed to a chemisorbed configuration. CO2 dissociation is found to be unfeasible on the stoichiometric surface. The introduction of oxygen vacancy defects gives rise to new highly stable adsorption configurations with a stronger activation of the C−O bonds. This leads to the possibility of exothermic dissociation of CO2 with barriers up to 22.2 kcal/mol, corresponding to chemical lifetimes of less than 4 s at 300 K. These reactions cause a CO molecule to be formed, which will easily desorb, and the reduced surface to become oxidized. It is clear that oxygen vacancy defects play a key role in the catalytic activity of an anatase (001) surface. Oxygen vacancies play an important role in the dissociation of CO2 on the anatase (001) surface, and will play a significant role in complex problems, such as the catalytic conversion of CO2 to value-added chemicals.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000384626800055	Publication Date	2016-09-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	49	Open Access
	Notes	Stijn Huygh is funded as an aspirant of the Research Foundation Flanders (FWO, project number 11C0115N). This work was carried out using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen (UAntwerpen), a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI), and the UAntwerpen.			Approved	Most recent IF: 4.536
	Call Number	PLASMANT @ plasmant @ c:irua:136164			Serial	4291
Permanent link to this record