NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	1–30 of 710 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 >>

List View

Citations

Details

	Records
	Author	Cao, S.; Tirry, W.; van den Broek, W.; Schryvers, D.
	Title	3D reconstruction of Ni₄Ti₃ precipitates in a Ni₅₁Ti₄₉ alloy in a FIB/SEM dual-beam system			Type	A1 Journal article
	Year	2008	Publication	Materials science forum	Abbreviated Journal
	Volume	583	Issue		Pages	277-284
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Ni4Ti3 precipitates play an important role in the shape memory and superelastic behaviour of thermo-mechanically treated Ni-Ti material. The 3D morphology and distribution of such precipitates with lenticular shape and rhombohedral atomic structure in the austenitic B2 matrix of a binary Ni-rich Ni-Ti alloy has been elucidated via a slice view procedure in a Dual-Beam FIB/SEM system. With the sequence of cross-section SE images obtained from the SEM, a 3D reconstruction has been achieved after proper alignment and image processing, from which both qualitative and quantitative analysis can be performed. Careful imaging is needed to ensure that all variants of the precipitates are observed with equal probability, regardless sample orientation. Moreover, due to the weak contrast of the precipitates, proper imaging conditions need to be selected to allow for semi-automated image treatment. Finally, a volume ratio of 10.2% for the Ni4Ti3 precipitates could be calculated, summed over all variants, which yields a net composition of Ni50.36Ti49.64 for the matrix, leading to an increase of 113 degrees for the martensitic start temperature Ms. Also, the expected relative orientation of the different variants of the precipitates could be confirmed. In the near future, other quantitative measures on the distribution of the precipitates can be expected.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos		Publication Date	2009-03-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-9752;	ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes	Multimat; Fwo			Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:77454			Serial	16
Permanent link to this record



	Author	Geuens, I.; Nys, B.; Gijbels, R.; Jacob, W.
	Title	Application of neural networks in image analysis: the classification of geometrical shapes			Type	A3 Journal article
	Year	1993	Publication	CC-AI: the journal for the integrated study of artificial intelligence, cognitive science and applied epistemology	Abbreviated Journal
	Volume	10	Issue		Pages	61-68
	Keywords	A3 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	MATERIALS SCIENCE, MULTIDISCIPLINARY 135/271 Q2 # PHYSICS, APPLIED 70/145 Q2 # PHYSICS, CONDENSED MATTER 40/67 Q3 #
	Call Number	UA @ lucian @ c:irua:6164			Serial	141
Permanent link to this record



	Author	Helm, M.; Hilber, W.; Fromherz, T.; Peeters, F.M.; Alavi, K.; Pathak, R.N.
	Title	Bloch and localized electrons in semiconductor superlattices			Type	A1 Journal article
	Year	1994	Publication	Semiconductor science and technology	Abbreviated Journal	Semicond Sci Tech
	Volume	9	Issue		Pages	1989-1993
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	A1994PT27100023	Publication Date	2002-08-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0268-1242;1361-6641;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.19	Times cited	1	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:9370			Serial	244
Permanent link to this record



	Author	Buschmann, V.; Schryvers, D.; van Landuyt, J.; van Roost, C.; de Keyzer, R.
	Title	A comparative investigation of replication techniques used for the study of (S+Au) sensitized AgBr microcrystals			Type	A1 Journal article
	Year	1996	Publication	The journal of imaging science and technology	Abbreviated Journal	J Imaging Sci Techn
	Volume	40	Issue		Pages	189-201
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Springfield, Va	Editor
	Language		Wos	A1996VL09200003	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1062-3701	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	0.349	Times cited	4	Open Access
	Notes				Approved	MATERIALS SCIENCE, MULTIDISCIPLINARY 135/271 Q2 # PHYSICS, APPLIED 70/145 Q2 # PHYSICS, CONDENSED MATTER 40/67 Q3 #
	Call Number	UA @ lucian @ c:irua:15428			Serial	418
Permanent link to this record



	Author	Adriaensen, L.; Vangaever, F.; Gijbels, R.
	Title	A comparative study of carbocyanine dyes measured with TOF-SIMS and other mass spectrometric techniques			Type	A1 Journal article
	Year	2004	Publication	Applied surface science	Abbreviated Journal	Appl Surf Sci
	Volume	231/232	Issue		Pages	348-352
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000222427700067	Publication Date	2004-04-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0169-4332;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.387	Times cited	7	Open Access
	Notes				Approved	Most recent IF: 3.387; 2004 IF: 1.497
	Call Number	UA @ lucian @ c:irua:46802			Serial	420
Permanent link to this record



	Author	Bogaerts, A.
	Title	Comprehensive modelling network for dc glow discharges in argon			Type	A1 Journal article
	Year	1999	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	8	Issue		Pages	210-229
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000080660600004	Publication Date	2002-08-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	27	Open Access
	Notes				Approved	Most recent IF: 3.302; 1999 IF: 2.038
	Call Number	UA @ lucian @ c:irua:24129			Serial	451
Permanent link to this record



	Author	Herregods, S.J.F.; Mertens, M.; Van Havenbergh, K.; Van Tendeloo, G.; Cool, P.; Buekenhoudt, A.; Meynen, V.
	Title	Controlling pore size and uniformity of mesoporous titania by early stage low temperature stabilization			Type	A1 Journal article
	Year	2013	Publication	Journal of colloid and interface science	Abbreviated Journal	J Colloid Interf Sci
	Volume	391	Issue		Pages	36-44
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	The control of the formation process during and after self-assembly is of utmost importance to achieve well structured, controlled template-assisted mesoporous titania materials with the desired properties for various applications via the evaporation induced self-assembly method (EISA). The present paper reports on the large influence of the thermal stabilization and successive template removal on the pore structure of a mesostructured TiO2 material using the diblock copolymer Brij 58 as surfactant. A controlled thermal stabilization (temperature and duration) allows one to tailor the final pore size and uniformity much more precise by influencing the self-assembly of the template. Moreover, also the successive thermal template removal needs to be controlled in order to avoid a structural collapse. N2-sorption, TGA, TEM, FT-Raman spectroscopy, and small angle wide angle XRD have been used to follow the crystal growth and mesostructure organization after thermal stabilization and after thermal template removal, revealing its effect on the final pore structure.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000312039000006	Publication Date	2012-10-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-9797;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.233	Times cited	12	Open Access
	Notes				Approved	Most recent IF: 4.233; 2013 IF: 3.552
	Call Number	UA @ lucian @ c:irua:101757			Serial	506
Permanent link to this record



	Author	Evans, T.; Kiflawi, I.; Luyten, W.; Van Tendeloo, G.; Woods, G.S.
	Title	Conversion of platelets into dislocation loops and voidite formation in type IaB diamonds			Type	A1 Journal article
	Year	1995	Publication	Proceedings of the Royal Society of London: series A: mathematical and physical sciences	Abbreviated Journal	P Roy Soc A-Math Phy
	Volume	449	Issue		Pages	295-313
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	A1995QY10100007	Publication Date	2006-12-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1364-5021;1471-2946;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.192	Times cited	32	Open Access
	Notes				Approved	COMPUTER SCIENCE, INTERDISCIPLINARY 11/104 Q1 # PHYSICS, MATHEMATICAL 1/53 Q1 #
	Call Number	UA @ lucian @ c:irua:13314			Serial	513
Permanent link to this record



	Author	Tso, H.C.; Vasilopoulos, P.; Peeters, F.M.
	Title	Coupled electron-hole transport: generalized random-phase approximation and density functional theory			Type	A1 Journal article
	Year	1994	Publication	Surface science : a journal devoted to the physics and chemistry of interfaces	Abbreviated Journal	Surf Sci
	Volume	305	Issue		Pages	400-404
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1994ND67400076	Publication Date	2002-10-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0039-6028;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.925	Times cited	5	Open Access
	Notes				Approved	PHYSICS, APPLIED 47/145 Q2 #
	Call Number	UA @ lucian @ c:irua:9380			Serial	535
Permanent link to this record



	Author	Jacques, P.; Verbist, K.; Lapin, J.; Ryelandt, L.; Van Tendeloo, G.; Delannay, F.
	Title	Critical assessment of the process of growth of a YBa₂Cu₃O_7-\delta layer on Y₂BaCuO₅			Type	A1 Journal article
	Year	1996	Publication	Superconductor science and technology	Abbreviated Journal	Supercond Sci Tech
	Volume	9	Issue		Pages	176-183
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	A1996TZ48100008	Publication Date	2002-08-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0953-2048;1361-6668;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.325	Times cited	1	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:15462			Serial	539
Permanent link to this record



	Author	van Landuyt, J.; Van Tendeloo, G.; Amelinckx, S.; Zhang, X.F.; Zhang, X.B.; Luyten, W.
	Title	Crystallography of fullerites and related graphene textures			Type	A1 Journal article
	Year	1994	Publication	Materials science forum	Abbreviated Journal
	Volume	150/151	Issue		Pages	53-64
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	A1994BC12F00004	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0255-5476; 1662-9752	ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:10001			Serial	590
Permanent link to this record



	Author	Van Tendeloo, G.; Hervieu, M.; Chaillout, C.
	Title	Defect structure of Hg-based ceramic superconductors (invited)			Type	P1 Proceeding
	Year	1994	Publication	Sciences	Abbreviated Journal
	Volume		Issue		Pages	949-952
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	Editions physique	Place of Publication	Les ulis	Editor
	Language		Wos	A1994BE09Y00462	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2-86883-226-1	ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:95940			Serial	621
Permanent link to this record



	Author	Ignatova, V.A.; Conard, T.; Möller, W.; Vandervorst, W.; Gijbels, R.
	Title	Depth profiling of ZrO₂/SiO₂/Si stacks : a TOF-SIMS and computer simulation study			Type	A1 Journal article
	Year	2004	Publication	Applied surface science	Abbreviated Journal	Appl Surf Sci
	Volume	231/232	Issue		Pages	603-608
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	This study is dedicated to a better understanding of the processes occurring under ion bombardment of ultra-thin ZrO2/SiO2/Si gate dielectric stacks. Complex-shaped depth profiles were obtained by using TOF-SIMS with dual beam (500 eV for sputtering and 10 keV for analysis) Ar+ ions. The SIMS intensities of all the elements depend critically on the amount of oxygen at any moment of the sputtering process. Increased intensity is observed at the surface and at the ZrO2/SiO2 interface. A long tail of the Zr signal is present in the Si substrate, even after the second (SiO2/Si) interface, and a double bump structure in the Zr-90 and ZrO dimer is observed, which is more pronounced with increasing thickness of the interfacial SiO2 layer. Computer simulations using the dynamic Monte Carlo code (TRIDYN) are performed in order to distinguish the ion bombardment-induced effects from changes in the ionization degree. The original code is extended with simple models for the ionization mechanism and for the molecular yield during sputtering. Oxygen preferential sputtering at the surface and ballistic transport of Zr towards and through the interface are clearly demonstrated, but there is also evidence that due to recoil implantation oxygen gets piled-up near the ZrO2/SiO2 interface. (C) 2004 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000222427700118	Publication Date	2004-05-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0169-4332;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.387	Times cited	4	Open Access
	Notes				Approved	Most recent IF: 3.387; 2004 IF: 1.497
	Call Number	UA @ lucian @ c:irua:51976			Serial	651
Permanent link to this record



	Author	Huygh, S.; Bogaerts, A.; van Duin, A.C.T.; Neyts, E.C.
	Title	Development of a ReaxFF reactive force field for intrinsic point defects in titanium dioxide			Type	A1 Journal article
	Year	2014	Publication	Computational materials science	Abbreviated Journal	Comp Mater Sci
	Volume	95	Issue		Pages	579-591
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A reactive ReaxFF force field is developed for studying the influence of intrinsic point defects on the chemistry with TiO2 condensed phases. The force field parameters are optimized to ab initio data for the equations of state, relative phase stabilities for titanium and titanium dioxide, potential energy differences for (TiO2)n-clusters (n = 116). Also data for intrinsic point defects in anatase were added. These data contain formation energies for interstitial titanium and oxygen vacancies, diffusion barriers of the oxygen vacancies and molecular oxygen adsorption on a reduced anatase (101) surface. Employing the resulting force field, we study the influence of concentration of oxygen vacancies and expansion or compression of an anatase surface on the diffusion of the oxygen vacancies. Also the barrier for oxygen diffusion in the subsurface region is evaluated using this force field. This diffusion barrier of 27.7 kcal/mol indicates that the lateral redistribution of oxygen vacancies on the surface and in the subsurface will be dominated by their diffusion in the subsurface, since both this barrier as well as the barriers for diffusion from the surface to the subsurface and vice versa (17.07 kcal/mol and 21.91 kcal/mol, respectively, as calculated with DFT), are significantly lower than for diffusion on the surface (61.12 kcal/mol as calculated with DFT).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000343781700077	Publication Date	2014-09-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0927-0256;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.292	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 2.292; 2014 IF: 2.131
	Call Number	UA @ lucian @ c:irua:119409			Serial	682
Permanent link to this record



	Author	Leadley, D.R.; Nicholas, R.J.; Singleton, J.; Xu, W.; Peeters, F.M.; Devreese, J.T.; van Bockstal, L.; Herlach, F.; Perenboom, J.A.A.J.; Harris, J.J.; Foxon, C.T.
	Title	Disappearance of magnetophonon resonance at high magnetic fields in GaAs-GaAlAs heterojunctions			Type	A1 Journal article
	Year	1994	Publication	Surface science : a journal devoted to the physics and chemistry of interfaces	Abbreviated Journal	Surf Sci
	Volume	305	Issue		Pages	327-331
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Theory of quantum systems and complex systems
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1994ND67400061	Publication Date	2002-10-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0039-6028;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.925	Times cited	1	Open Access
	Notes				Approved
	Call Number	UA @ lucian @ c:irua:9280			Serial	728
Permanent link to this record



	Author	Wang, X.; Amin-Ahmadi, B.; Schryvers, D.; Verlinden, B.; Van Humbeeck, J.
	Title	Effect of annealing on the transformation behavior and mechanical properties of two nanostructured Ti-50.8at.%Ni thin wires produced by different methods			Type	A1 Journal article
	Year	2013	Publication	Materials science forum	Abbreviated Journal
	Volume	738/739	Issue		Pages	306-310
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A Ti-50.8at.%Ni wire produced using a co-drawing method and a commercial Ti-50.8at.%Ni wire were annealed at different temperatures between 450°C and 700°C. Grains with diameter less than 100nm were revealed by transmission electron microscopy for both wires before annealing treatment. However, the microstructural heterogeneity of the co-drawn wire is more obvious than that of the commercial wire. Multi-stage martensitic transformation was observed in the co-drawn wire, compared with the one-stage A↔M transformation in the commercial wire after annealing at 600°C for 30min. The differences of total elongation, plateau strain and pseudoelastic recoverable strain between the commercial wire and the co-drawn wire were also observed. The differences of the transformation behavior and mechanical properties between the commercial wire and the co-drawn wire are attributed to the microstructural difference between these two wires.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000316089000055	Publication Date	2013-03-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-9752;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	5	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:104691			Serial	798
Permanent link to this record



	Author	Amin-Ahmadi, B.; Idrissi, H.; Galceran, M.; Colla, M.S.; Raskin, J.P.; Pardoen, T.; Godet, S.; Schryvers, D.
	Title	Effect of deposition rate on the microstructure of electron beam evaporated nanocrystalline palladium thin films			Type	A1 Journal article
	Year	2013	Publication	Thin solid films : an international journal on the science and technology of thin and thick films	Abbreviated Journal	Thin Solid Films
	Volume	539	Issue		Pages	145-150
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The influence of the deposition rate on the formation of growth twins in nanocrystalline Pd films deposited by electron beam evaporation is investigated using transmission electron microscopy. Statistical measurements prove that twin boundary (TB) density and volume fraction of grains containing twins increase with increasing deposition rate. A clear increase of the dislocation density was observed for the highest deposition rate of 5 Å/s, caused by the increase of the internal stress building up during deposition. Based on crystallographic orientation indexation using transmission electron microscopy, it can be concluded that a {111} crystallographic texture increases with increasing deposition rate even though the {101} crystallographic texture remains dominant. Most of the TBs are fully coherent without any residual dislocations. However, for the highest deposition rate (5 Å/s), the coherency of the TBs decreases significantly as a result of the interaction of lattice dislocations emitted during deposition with the growth TBs. The analysis of the grain boundary character of different Pd films shows that an increasing fraction of high angle grain boundaries with misorientation angles around 5565° leads to a higher potential for twin formation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000321111100025	Publication Date	2013-05-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0040-6090;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.879	Times cited	13	Open Access
	Notes	Fwo			Approved	Most recent IF: 1.879; 2013 IF: 1.867
	Call Number	UA @ lucian @ c:irua:109268			Serial	807
Permanent link to this record



	Author	E. Zaghi, A.; Buffière, M.; Koo, J.; Brammertz, G.; Batuk, M.; Verbist, C.; Hadermann, J.; Kim, W.K.; Meuris, M.; Poortmans, J.; Vleugels, J.;
	Title	Effect of selenium content of CuInSe_x alloy nanopowder precursors on recrystallization of printed CuInSe₂ absorber layers during selenization heat treatment			Type	A1 Journal article
	Year	2014	Publication	Thin solid films : an international journal on the science and technology of thin and thick films	Abbreviated Journal	Thin Solid Films
	Volume		Issue		Pages	1-7
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Polycrystalline CuInSe2 semiconductors are efficient light absorber materials for thin film solar cell technology, whereas printing is one of the promising low cost and non-vacuum approaches for the fabrication of thin film solar cells. The printed precursors are transformed into a dense polycrystalline CuInSe2 semiconductor film via thermal treatment in ambient selenium atmosphere (selenization). In this study, the effect of the selenium content in high purity mechanically synthesized CuInSex (x = 2, 1.5, 1 or 0.5) alloy precursors on the recrystallization of the CuInSe2 phase during the selenization process was investigated. The nanostructure and phase variation of CuInSex nanopowders were investigated by different characterization techniques. The recrystallization process of the 12 μm thick CuInSex coatings into the CuInSe2 phase during selenization in selenium vapor was investigated via in-situ high temperature X-ray diffraction. The CuInSex precursors with lower selenium content showed a more pronounced phase conversion into CuInSe2 compared to the higher selenium content CuInSex precursors. Moreover, the CuInSex (x = 0.5 and 1) precursor resulted in a denser polycrystalline CuInSe2 semiconductor film with larger crystals. This could be attributed to a more intensive atomic interdiffusion within the CuInSex precursor system compared to a CuInSe2 phase precursor, and the formation of intermediate CuSe and CuSe2 fluxing phases during selenization.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000352225900004	Publication Date	2014-10-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0040-6090;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.879	Times cited	7	Open Access
	Notes				Approved	Most recent IF: 1.879; 2014 IF: 1.759
	Call Number	c:irua:121330			Serial	834
Permanent link to this record



	Author	Yan, M.; Bogaerts, A.; Goedheer, W.J.; Gijbels, R.
	Title	Electron energy distribution function in capacitively coupled RF discharges: differences between electropositive Ar and electronegative SiH₄ discharges			Type	A1 Journal article
	Year	2000	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	9	Issue		Pages	583-591
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000165341000015	Publication Date	2002-08-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	21	Open Access
	Notes				Approved	Most recent IF: 3.302; 2000 IF: 1.963
	Call Number	UA @ lucian @ c:irua:34071			Serial	929
Permanent link to this record



	Author	Yang, Z.Q.; Schryvers, D.
	Title	Electron energy-loss spectroscopy study of NiTi shape memory alloys			Type	A1 Journal article
	Year	2008	Publication	Materials science and engineering: part A: structural materials: properties, microstructure and processing	Abbreviated Journal	Mat Sci Eng A-Struct
	Volume	481	Issue		Pages	214-217
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000255716100041	Publication Date	2007-06-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-5093;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.094	Times cited	7	Open Access
	Notes	Gao			Approved	Most recent IF: 3.094; 2008 IF: 1.806
	Call Number	UA @ lucian @ c:irua:69156			Serial	934
Permanent link to this record



	Author	Van Tendeloo, G.; Amelinckx, S.
	Title	Electron-microscopy and the structural studies of superconducting materials and fullerites			Type	P1 Proceeding
	Year	1994	Publication	NATO Advanced Study Institutes series: series E : applied sciences T2 – NATO Advanced Study Institute on Materials and crystallographic Aspects, of HT(c)-Superconductivity, May 17-30, 1993, Erice, Italy	Abbreviated Journal
	Volume		Issue		Pages	521-538
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	Kluwer Academic	Place of Publication	Dordrecht	Editor
	Language		Wos	A1994BA54N00025	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume	263	Series Issue		Edition
	ISSN	0-7923-2773-X	ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:95934			Serial	949
Permanent link to this record



	Author	Frangis, N.; Van Tendeloo, G.; van Landuyt, J.; Muret, P.; Nguyen, T.T.A.
	Title	Electron microscopy characterisation of erbium silicide-thin films grown on a Si(111) substrate			Type	A1 Journal article
	Year	1996	Publication	Applied surface science	Abbreviated Journal	Appl Surf Sci
	Volume	102	Issue		Pages	163-168
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1996VJ86100037	Publication Date	2003-05-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0169-4332;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.711	Times cited	9	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:15458			Serial	953
Permanent link to this record



	Author	Ibrahim, I.S.; Peeters, F.M.
	Title	Electrons in a periodic magnetic field			Type	A1 Journal article
	Year	1996	Publication	Surface science : a journal devoted to the physics and chemistry of interfaces	Abbreviated Journal	Surf Sci
	Volume	361/362	Issue		Pages	341-344
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1996UZ03300083	Publication Date	2002-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0039-6028;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.925	Times cited	3	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:15815			Serial	1020
Permanent link to this record



	Author	Shi, H.; Frenzel, J.; Schryvers, D.
	Title	EM characterization of precipitates in as-cast and annealed Ni_45.5Ti_45.5Nb₉ shape memory alloys			Type	P1 Proceeding
	Year	2013	Publication	Materials science forum	Abbreviated Journal
	Volume	738/739	Issue		Pages	113-117
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract	Nb-rich precipitates in the matrix of as-cast and annealed Ni45.5Ti45.5Nb9 alloys are investigated by scanning and scanning transmission electron microscopy, including slice-and-view and geometric phase analysis (GPA). The Nb-rich bcc nano-precipitates in the as-cast alloy have a 10% lattice parameter difference with the B2 matrix and reveal compensating interface dislocations. The 3D reconstruction of the configuration of small Nb-rich precipitates in the annealed alloy reveals a wall-like distribution of precipitates, which may increase the thermal hysteresis of the material.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000316089000020	Publication Date	2013-03-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-9752;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	1	Open Access
	Notes	Fwo			Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:104690			Serial	1028
Permanent link to this record



	Author	Zhang, X.B.; Vasiliev, A.L.; Van Tendeloo, G.; He, Y.; Yu, L.-M.; Thiry, P.A.
	Title	EM, XPS and LEED study of deposition of Ag on hydrogenated Si substrate prepared by wet chemical treatments			Type	A1 Journal article
	Year	1995	Publication	Surface science : a journal devoted to the physics and chemistry of interfaces	Abbreviated Journal	Surf Sci
	Volume	340	Issue		Pages	317-327
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1995TA17600013	Publication Date	2002-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0039-6028;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.925	Times cited	11	Open Access
	Notes				Approved
	Call Number	UA @ lucian @ c:irua:13319			Serial	1032
Permanent link to this record



	Author	Romano-Rodriguez, A.; Perez-Rodriguez, A.; Serre, C.; van Landuyt, J.; et al.
	Title	Epitaxial growth of \beta-SiC on ion-beam synthesized \beta-SiC : structural characterization			Type	A1 Journal article
	Year	2000	Publication	Materials science forum T2 – International Conference on Silicon Carbide and Related Materials, OCT 10-15, 1999, RES TRIANGLE PK, NORTH CAROLINA	Abbreviated Journal	Mater Sci Forum
	Volume	338-3	Issue		Pages	309-312
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	In this work we present for the first time, to our knowledge, the CVD epitaxial growth of beta -SiC using an ion beam synthesized (IBS) beta -SiC layer as seed, which has been formed by multiple implantation into Si wafers at 500 degreesC. The ion beam synthesized continuous layer is constituted by beta -SiC nanocrystals that are well oriented relative to the silicon substrate. Comparison of the epitaxial growth on these samples with that on silicon test samples, both on and off-axis, is performed. The results show that the epitaxial growth can be achieved on the IBS samples without the need of the carbonization step and that the structural quality of the CVD layer is comparable to that obtained on a carbonized silicon sample. Improvement of the quality of the deposited layer is proposed.
	Address
	Corporate Author				Thesis
	Publisher	Trans tech publications ltd	Place of Publication	Zurich-uetikon	Editor
	Language		Wos	000165996700075	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0255-5476	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	2	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:104262			Serial	1071
Permanent link to this record



	Author	van den Broek, B.; Houssa, M.; Scalise, E.; Pourtois, G.; Afanas'ev, V.V.; Stesmans, A.
	Title	First-principles electronic functionalization of silicene and germanene by adatom chemisorption			Type	A1 Journal article
	Year	2014	Publication	Applied surface science	Abbreviated Journal	Appl Surf Sci
	Volume	291	Issue		Pages	104-108
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	This study presents first-principles results on the electronic functionalization of silicene and germanene monolayers by means of chemisorption of adatom species H, Li, F, Sc, Ti, V. Three general adatom-monolayer configurations are considered, each having its distinct effect on the electronic structure, yielding metallic or semiconducting dispersions depending on the adatom species and configuration. The induced bandgap is a (in)direct F gap ranging from 0.2 to 2.3 eV for both silicene and germanene. In general the alternating configuration was found to be the most energetically stable. The boatlike and chairlike conformers are degenerate with the former having anisotropic effective carrier masses. The top configuration leads to the planar monolayer and predominately to a gapped dispersion. The hollow configuration with V adatoms retains the Dirac cone, but with strong orbital planar hybridization at the Fermi level. We also observe a planar surface state the Fermi level for the latter systems. (C) 2013 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000329327700023	Publication Date	2013-09-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0169-4332;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.387	Times cited	32	Open Access
	Notes				Approved	Most recent IF: 3.387; 2014 IF: 2.711
	Call Number	UA @ lucian @ c:irua:113766			Serial	1208
Permanent link to this record



	Author	Nistor, L.C.; van Landuyt, J.; Ralchenko, V.G.; Kononenko, T.V.; Obraztsova, E.D.; Strelnitsky, V.E.
	Title	Formation of diamond nanocrystals in laser-irradiated amorphous carbon films			Type	P3 Proceeding
	Year	1994	Publication	International Conference on the New Diamond Science and Technology	Abbreviated Journal
	Volume	4	Issue		Pages	25-29
	Keywords	P3 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:10059			Serial	1259
Permanent link to this record



	Author	Laffez, P.; Chen, X.Y.; Banerjee, G.; Pezeril, T.; Rossell, M.D.; Van Tendeloo, G.; Lacorre, P.; Liu, J.M.; Liu, Z.-G.
	Title	Growth of La₂Mo₂O₉ films on porous Al₂O₃ substrates by radio frequency magnetron sputtering			Type	A1 Journal article
	Year	2006	Publication	Thin solid films : an international journal on the science and technology of thin and thick films	Abbreviated Journal	Thin Solid Films
	Volume	500	Issue		Pages	27-33
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000235764600006	Publication Date	2005-12-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0040-6090;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.879	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 1.879; 2006 IF: 1.666
	Call Number	UA @ lucian @ c:irua:57000			Serial	1396
Permanent link to this record



	Author	Bouvier, S.; Benmhenni, N.; Tirry, W.; Gregory, F.; Nixon, M.E.; Cazacu, O.; Rabet, L.
	Title	Hardening in relation with microstructure evolution of high purity \alpha-titanium deformed under monotonic and cyclic simple shear loadings at room temperature			Type	A1 Journal article
	Year	2012	Publication	Materials science and engineering: part A: structural materials: properties, microstructure and processing	Abbreviated Journal	Mat Sci Eng A-Struct
	Volume	535	Issue		Pages	12-21
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The aim of this paper is to gain understanding of the quasi-static, large strain deformation behavior at room-temperature of high-purity alpha-Ti with an initial split-basal texture. Simple shear tests were conducted along different directions in order to quantify the material's anisotropy and hardening evolution for different strain paths such as monotonic, Bauschinger, and cyclic loadings. The stress-strain curves indicate that the material displays strong anisotropy in the flow behavior. In order to capture the link between microstructure evolution (occurrence of twinning, grain size evolution, etc.) and the macroscopic response, a thoroughly detailed multi-scale characterization using scanning electron microscope (SEM) observations and electron backscattered diffraction (EBSD) analysis was also conducted. Specifically, EBSD analyses indicate that the twin activity and grain fragmentation are responsible for the observed difference between the macroscopic hardening rates corresponding to different directions and loading paths. (C) 2011 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000301402400003	Publication Date	2011-12-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-5093;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.094	Times cited	22	Open Access
	Notes				Approved	Most recent IF: 3.094; 2012 IF: 2.108
	Call Number	UA @ lucian @ c:irua:97824			Serial	1410
Permanent link to this record