| |
Records |
Links |
|
Author |
Van Hoorebeke, L.; Leroux, O.; Leroux, F.; Mastroberti, A.A.; Santos-Silva, F.; Van Loo, D.; Bagniewska-Zadworna, A.; Bals, S.; Popper, Z.A.; de Araujo Mariath, J.E. |
|
| |
Title |
Heterogeneity of silica and glycan-epitope distribution in epidermal idioblast cell walls in Adiantum raddianum laminae |
Type |
A1 Journal article |
| |
Year |
2013 |
Publication |
Planta |
Abbreviated Journal |
Planta |
|
| |
Volume  |
237 |
Issue |
6 |
Pages |
1453-1464 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
Laminae of Adiantum raddianum Presl., a fern belonging to the family Pteridaceae, are characterised by the presence of epidermal fibre-like cells under the vascular bundles. These cells were thought to contain silica bodies, but their thickened walls leave no space for intracellular silica suggesting it may actually be deposited within their walls. Using advanced electron microscopy in conjunction with energy dispersive X-ray microanalysis we showed the presence of silica in the cell walls of the fibre-like idioblasts. However, it was specifically localised to the outer layers of the periclinal wall facing the leaf surface, with the thick secondary wall being devoid of silica. Immunocytochemical experiments were performed to ascertain the respective localisation of silica deposition and glycan polymers. Epitopes characteristic for pectic homogalacturonan and the hemicelluloses xyloglucan and mannan were detected in most epidermal walls, including the silica-rich cell wall layers. The monoclonal antibody, LM6, raised against pectic arabinan, labelled the silica-rich primary wall of the epidermal fibre-like cells and the guard cell walls, which were also shown to contain silica. We hypothesise that the silicified outer wall layers of the epidermal fibre-like cells support the lamina during cell expansion prior to secondary wall formation. This implies that silicification does not impede cell elongation. Although our results suggest that pectic arabinan may be implicated in silica deposition, further detailed analyses are needed to confirm this. The combinatorial approach presented here, which allows correlative screening and in situ localisation of silicon and cell wall polysaccharide distribution, shows great potential for future studies. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
|
| |
Language |
|
Wos |
000319474200004 |
Publication Date |
2013-02-21 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0032-0935;1432-2048; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
3.361 |
Times cited |
16 |
Open Access |
|
|
| |
Notes |
We are grateful to the Laboratorio de Anatomia Vegetal of Universidade Federal do Rio Grande do Sul (UFRGS) and the Centro de Microscopia Eletronica (CME) of UFRGS. Thanks to Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) for the undergraduate degree grant provided (PIBIC) for the fourth author and research grant and support for the last one. The third author is grateful to Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES) for providing financial support (PRODOC). We acknowledge Christiane de Queiroz Lopes and Moema Queiroz (CME) for the technical assistance. We are indebted to Paul Knox (Centre for Plant Sciences, University of Leeds, UK) for kindly providing the monoclonal antibodies used in this study. The Fund for Scientific Research-Flanders (FWO) is acknowledged for the doctoral grant to D. Van Loo (G.0100.08). |
Approved |
Most recent IF: 3.361; 2013 IF: 3.376 |
|
| |
Call Number |
UA @ lucian @ c:irua:109641 |
Serial |
1419 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
van Rossum, M.; Schoenmaker, W.; Magnus, W.; de Meyer, K.; Croitoru, M.D.; Gladilin, V.N.; Fomin, V.M.; Devreese, J.T. |
|
| |
Title |
Moore's law: new playground for quantum physics |
Type |
A1 Journal article |
| |
Year |
2003 |
Publication |
Physica status solidi: B: basic research |
Abbreviated Journal |
Phys Status Solidi B |
|
| |
Volume |
237 |
Issue |
|
Pages |
426-432 |
|
| |
Keywords |
A1 Journal article; Theory of quantum systems and complex systems; Condensed Matter Theory (CMT); Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
|
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Berlin |
Editor |
|
|
| |
Language |
|
Wos |
000182801800041 |
Publication Date |
2003-04-24 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0370-1972;1521-3951; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
1.674 |
Times cited |
2 |
Open Access |
|
|
| |
Notes |
|
Approved |
Most recent IF: 1.674; 2003 IF: 0.987 |
|
| |
Call Number |
UA @ lucian @ c:irua:44284 |
Serial |
2202 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Huybrechts, W.; Mali, G.; Kuśtrowski, P.; Willhammar, T.; Mertens, M.; Bals, S.; Van Der Voort, P.; Cool, P. |
|
| |
Title |
Post-synthesis bromination of benzene bridged PMO as a way to create a high potential hybrid material |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Microporous and mesoporous materials: zeolites, clays, carbons and related materials |
Abbreviated Journal |
Micropor Mesopor Mat |
|
| |
Volume |
236 |
Issue |
236 |
Pages |
244-249 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA) |
|
| |
Abstract |
Periodic mesoporous organosilicas provide the best of two worlds: the strength and porosity of an inorganic framework combined with the infinite possibilities created by the organic bridging unit. In this work we focus on post-synthetical modification of benzene bridged PMO, in order to create bromobenzene PMO. In the past, this proved to be very challenging due to unwanted structural deterioration. However, now we have found a way to brominate this material whilst keeping the structure intact. In-depth structural analysis by solid state NMR and XPS shows both vast progress over previous attempts as well as potential for improvement. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
000385899600028 |
Publication Date |
2016-09-10 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
1387-1811 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
3.615 |
Times cited |
7 |
Open Access |
OpenAccess |
|
| |
Notes |
; The authors would like to thank financial support from the FWO-Flanders (project no G.0068.13). The authors further acknowledge financial support of the University of Antwerp through BOF GOA funding. S.B. acknowledges financial support from European Research Council (ERC Starting Grant #335078-COLOURATOM). ; ecas_Sara |
Approved |
Most recent IF: 3.615 |
|
| |
Call Number |
UA @ lucian @ c:irua:135274 |
Serial |
4228 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Hervieu, M.; Michel, C.; Van Tendeloo, G.; Martin, C.; Maignan, A.; Raveau, B. |
|
| |
Title |
Copper oxycarbonates and mercury based cuprates: structural mechanisms of new superconductors |
Type |
A1 Journal article |
| |
Year |
1994 |
Publication |
Physica: C : superconductivity |
Abbreviated Journal |
Physica C |
|
| |
Volume |
235/240 |
Issue |
|
Pages |
25-28 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
|
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
A1994QA39000011 |
Publication Date |
2002-10-17 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0921-4534; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
0.942 |
Times cited |
8 |
Open Access |
|
|
| |
Notes |
|
Approved |
COMPUTER SCIENCE, INTERDISCIPLINARY 11/104 Q1 # PHYSICS, MATHEMATICAL 1/53 Q1 # |
|
| |
Call Number |
UA @ lucian @ c:irua:10046 |
Serial |
517 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Amelinckx, S.; Van Tendeloo, G. |
|
| |
Title |
Electron microscopy of recent high Tc superconductors |
Type |
A1 Journal article |
| |
Year |
1994 |
Publication |
Physica: C : superconductivity |
Abbreviated Journal |
Physica C |
|
| |
Volume |
235/240 |
Issue |
|
Pages |
162-165 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
|
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
A1994QA39000044 |
Publication Date |
2002-10-17 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0921-4534; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
0.942 |
Times cited |
6 |
Open Access |
|
|
| |
Notes |
|
Approved |
no |
|
| |
Call Number |
UA @ lucian @ c:irua:10045 |
Serial |
963 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Milat, O.; Krekels, T.; Van Tendeloo, G.; Amelinckx, S. |
|
| |
Title |
The superlattices in high Tc superconducting cuprates |
Type |
A1 Journal article |
| |
Year |
1994 |
Publication |
Physica: C : superconductivity |
Abbreviated Journal |
Physica C |
|
| |
Volume |
235/240 |
Issue |
|
Pages |
729-730 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
|
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
A1994QC69400005 |
Publication Date |
2002-10-17 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0921-4534; |
ISBN |
|
Additional Links |
UA library record; WoS full record |
|
| |
Impact Factor |
0.942 |
Times cited |
|
Open Access |
|
|
| |
Notes |
|
Approved |
PHYSICS, APPLIED 28/145 Q1 # |
|
| |
Call Number |
UA @ lucian @ c:irua:10048 |
Serial |
3380 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Verbist, K.; Van Tendeloo, G.; Ye, M.; Mehbod, M.; Deltour, R. |
|
| |
Title |
TEM study of YBa2Cu3O7-x thin films with Zn and Fe |
Type |
A1 Journal article |
| |
Year |
1994 |
Publication |
Physica: C : superconductivity |
Abbreviated Journal |
Physica C |
|
| |
Volume |
235 |
Issue |
1 |
Pages |
663-664 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
Analytical and high resolution electron microscopy have been used to study the effect of Zn- and Fe-doping on the micro structure of [001] YBa2Cu3O7-x thin films on [001] MgO substrates grown by magnetron sputtering. Special attention was paid to the presence of second phase inclusions and surface outgrowths such as CuO, Y2Ba1Cu1O5-x, Y2O3 in order to establish a relationship with the critical current density. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
A1994QA39000261 |
Publication Date |
2002-10-17 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0921-4534; |
ISBN |
|
Additional Links |
UA library record; WoS full record |
|
| |
Impact Factor |
0.942 |
Times cited |
|
Open Access |
|
|
| |
Notes |
|
Approved |
no |
|
| |
Call Number |
UA @ lucian @ c:irua:10047 |
Serial |
3492 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Choisez, L.; Ding, L.; Marteleur, M.; Kashiwar, A.; Idrissi, H.; Jacques, P.J. |
|
| |
Title |
Shear banding-activated dynamic recrystallization and phase transformation during quasi-static loading of β-metastable Ti – 12 wt % Mo alloy |
Type |
A1 Journal article |
| |
Year |
2022 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
| |
Volume |
235 |
Issue |
|
Pages |
118088-13 |
|
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
Dynamic recrystallization (DRX) within adiabatic shear bands forming during the fracture of TRIP-TWIP β−metastable Ti-12Mo (wt %) alloy was recently reported. The formation of 1-3 µm thick-adiabatic shear bands, and of dynamic recrystallization, was quite surprising as their occurrence generally requires high temperature and/or high strain rate loading while these samples were loaded in quasi-static conditions at room temperature. To better understand the fracture mechanism and associated microstructural evolution, thin foils representative of different stages of the fracture process were machined from the fracture surface by Focused Ion Beam (FIB) and analyzed by Transmission Electron Microscopy (TEM) and Automated Crystal Orientation mapping (ACOM-TEM). Complex microstructure transformations involving severe plastic deformed nano-structuration, crystalline rotation and local precipitation of the omega phase were identified. The spatial and temporal evolution of the microstructure during the propagation of the crack was explained through dynamic recovery and continuous dynamic recrystallization, and linked to the modelled distribution of temperature and strain level where TEM samples were extracted. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
|
| |
Language |
|
Wos |
000814729300005 |
Publication Date |
2022-06-05 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
9.4 |
Times cited |
|
Open Access |
OpenAccess |
|
| |
Notes |
|
Approved |
Most recent IF: 9.4 |
|
| |
Call Number |
UA @ admin @ c:irua:188505 |
Serial |
7096 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
van Daele, B.; Van Tendeloo, G.; Germain, M.; Leys, M.; Bougrioua, Z.; Moerman, I. |
|
| |
Title |
Relation between microstructure and 2DEG properties of AlGaN/GaN structures |
Type |
A1 Journal article |
| |
Year |
2002 |
Publication |
Physica status solidi: B: basic research |
Abbreviated Journal |
Phys Status Solidi B |
|
| |
Volume |
234 |
Issue |
3 |
Pages |
830-834 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
|
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Berlin |
Editor |
|
|
| |
Language |
|
Wos |
000180038200031 |
Publication Date |
2002-12-03 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0370-1972;1521-3951; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
1.674 |
Times cited |
1 |
Open Access |
|
|
| |
Notes |
|
Approved |
Most recent IF: 1.674; 2002 IF: 0.930 |
|
| |
Call Number |
UA @ lucian @ c:irua:54847 |
Serial |
2857 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Frangis, N.; Van Tendeloo, G.; van Landuyt, J.; Muret, P.; Nguyen, T.T.A. |
|
| |
Title |
Structural characterisation of erbium silicide thin films of an Si(111) substrate |
Type |
A1 Journal article |
| |
Year |
1996 |
Publication |
Journal of alloys and compounds |
Abbreviated Journal |
J Alloy Compd |
|
| |
Volume |
234 |
Issue |
2 |
Pages |
244-250 |
|
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
ErSi2-x films (x = 0.1-0.3) grown by co-evaporation at different deposition ratios have been characterised by transmission electron microscopy, electron diffraction and high resolution electron microscopy. A very good epitaxial growth relation with the Si substrate was deduced for a1 samples and observed phases. Different defect modulated structures are formed; they can be described as structural variants (orthorhombic or rhombohedral) of the basic structure. The modulated phases are related to deviations from stoichiometry similar to crystallographic shear structures. The ErSi1.9 material contains Si precipitates, illustrating the preference for the ErSi1.7 composition to be maintained. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
A1996TX65100020 |
Publication Date |
2002-07-26 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0925-8388; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
2.999 |
Times cited |
14 |
Open Access |
|
|
| |
Notes |
|
Approved |
|
|
| |
Call Number |
UA @ lucian @ c:irua:15451 |
Serial |
3213 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Kurttepeli, M.; Locus, R.; Verboekend, D.; de Clippel, F.; Breynaert, E.; Martens, J.; Sels, B.; Bals, S. |
|
| |
Title |
Synthesis of aluminum-containing hierarchical mesoporous materials with columnar mesopore ordering by evaporation induced self assembly |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Microporous and mesoporous materials: zeolites, clays, carbons and related materials |
Abbreviated Journal |
Micropor Mesopor Mat |
|
| |
Volume |
234 |
Issue |
234 |
Pages |
186-195 |
|
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
The incorporation of aluminum into the silica columns of hierarchical mesoporous materials (HMMs) was studied. The HMMs were synthesized by a combination of hard and soft templating methods, forming mesoporous SBA-15-type silica columns inside the pores of anodic aluminum oxide membranes via evaporation induced self-assembly (EISA). By adding Al-isopropoxide to the EISA-mixture a full tetrahedral incorporation of Al and thus the creation of acid sites was achieved, which was proved by nuclear magnetic resonance spectroscopy. Electron microscopy showed that the use of Al-isopropoxide as an Al source for the HMMs led to a change in the mesopore ordering of silica material from circular hexagonal (donut-like) to columnar hexagonal and a 37% increase in specific surface (BET surface). These results were confirmed by a combination of nitrogen physisorption and small-angle X-ray scattering experiments and can be attributed to a swelling of the P123 micelles with isopropanol. The columnar mesopore ordering of silica is advantageous towards the pore accessibility and therefore preferential for many possible applications including catalysis and adsorption on the acid tetrahedral Al-sites. (C) 2016 Elsevier Inc. All rights reserved. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
000383291400020 |
Publication Date |
2016-07-09 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
1387-1811 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
3.615 |
Times cited |
5 |
Open Access |
OpenAccess |
|
| |
Notes |
; The Belgian government (Belgian Science Policy Office, Belspo) is acknowledged for financing the Interuniversity Attraction Poles (IAP-PAI). S. B. acknowledges the financial support from the European Research Council (ERC Starting Grant #335078-COLOURATOMS). D. V. acknowledges the Flanders Research Foundation (FWO). ; ecas_Sara |
Approved |
Most recent IF: 3.615 |
|
| |
Call Number |
UA @ lucian @ c:irua:137108 |
Serial |
4404 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Cao, S.; Tirry, W.; van den Broek, W.; Schryvers, D. |
|
| |
Title |
Optimization of a FIB/SEM slice-and-view study of the 3D distribution of Ni4Ti3 precipitates in NiTi |
Type |
A1 Journal article |
| |
Year |
2009 |
Publication |
Journal of microscopy |
Abbreviated Journal |
J Microsc-Oxford |
|
| |
Volume |
233 |
Issue |
1 |
Pages |
61-68 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
|
| |
Abstract |
The 3D morphology and distribution of lenticular Ni4Ti3 precipitates in the austenitic B2 matrix of a binary Ni51Ti49 alloy has been investigated by a slice-and-view procedure in a dual-beam focused ion beam/scanning electron microscope system. Due to the weak contrast of the precipitates, proper imaging conditions need to be selected first to allow for semi-automated image treatment. Knowledgeable imaging is further needed to ensure that all variants of the precipitates are observed with equal probability, regardless of sample orientation. Finally, a volume ratio of 10.2% for the Ni4Ti3 precipitates could be calculated, summed over all variants, which yields a net composition of Ni50.27Ti49.73 for the matrix, leading to an increase of 125 degrees for the martensitic start temperature. Also, the expected relative orientation of the different variants of the precipitates could be confirmed. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
| |
Language |
|
Wos |
000262511900008 |
Publication Date |
2009-01-15 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0022-2720;1365-2818; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
1.692 |
Times cited |
22 |
Open Access |
|
|
| |
Notes |
Multimat Fwo; G0465.05 |
Approved |
Most recent IF: 1.692; 2009 IF: 1.612 |
|
| |
Call Number |
UA @ lucian @ c:irua:76026 |
Serial |
2486 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Jannis, D.; Hofer, C.; Gao, C.; Xie, X.; Béché, A.; Pennycook, Tj.; Verbeeck, J. |
|
| |
Title |
Event driven 4D STEM acquisition with a Timepix3 detector: Microsecond dwell time and faster scans for high precision and low dose applications |
Type |
A1 Journal article |
| |
Year |
2022 |
Publication |
Ultramicroscopy |
Abbreviated Journal |
Ultramicroscopy |
|
| |
Volume |
233 |
Issue |
|
Pages |
113423 |
|
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
Four dimensional scanning transmission electron microscopy (4D STEM) records the scattering of electrons in a material in great detail. The benefits offered by 4D STEM are substantial, with the wealth of data it provides facilitating for instance high precision, high electron dose efficiency phase imaging via centre of mass or ptychography based analysis. However the requirement for a 2D image of the scattering to be recorded at each probe position has long placed a severe bottleneck on the speed at which 4D STEM can be performed. Recent advances in camera technology have greatly reduced this bottleneck, with the detection efficiency of direct electron detectors being especially well suited to the technique. However even the fastest frame driven pixelated detectors still significantly limit the scan speed which can be used in 4D STEM, making the resulting data susceptible to drift and hampering its use for low dose beam sensitive applications. Here we report the development of the use of an event driven Timepix3 direct electron camera that allows us to overcome this bottleneck and achieve 4D STEM dwell times down to 100 ns; orders of magnitude faster than what has been possible with frame based readout. We characterize the detector for different acceleration voltages and show that the method is especially well suited for low dose imaging and promises rich datasets without compromising dwell time when compared to conventional STEM imaging. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
|
| |
Language |
|
Wos |
000734396800003 |
Publication Date |
2021-11-13 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0304-3991 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
2.2 |
Times cited |
31 |
Open Access |
OpenAccess |
|
| |
Notes |
This project has received funding from the Euro- pean Union’s Horizon 2020 Research Infrastructure – Integrating Activities for Advanced Communities under grant agreement No 823717 – ESTEEM3. J.V. and A.B. acknowledge funding from FWO project G093417N (‘Compressed sensing enabling low dose imaging in transmission electron microscopy’). J.V. and D.J. ac- knowledge funding from FWO project G042920N ‘Co- incident event detection for advanced spectroscopy in transmission electron microscopy’. We acknowledge funding under the European Union’s Horizon 2020 re- search and innovation programme (J.V. and D.J un- der grant agreement No 101017720, FET-Proactive EBEAM, and C.H., C.G., X.X. and T.J.P. from the Eu- ropean Research Council (ERC) Grant agreement No. 802123-HDEM).; esteem3JRA; esteem3reported |
Approved |
Most recent IF: 2.2 |
|
| |
Call Number |
EMAT @ emat @c:irua:183948 |
Serial |
6828 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Robert, Hl.; Lobato, I.; Lyu, Fj.; Chen, Q.; Van Aert, S.; Van Dyck, D.; Müller-Caspary, K. |
|
| |
Title |
Dynamical diffraction of high-energy electrons investigated by focal series momentum-resolved scanning transmission electron microscopy at atomic resolution |
Type |
A1 Journal article |
| |
Year |
2022 |
Publication |
Ultramicroscopy |
Abbreviated Journal |
Ultramicroscopy |
|
| |
Volume |
233 |
Issue |
|
Pages |
113425 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
|
| |
Abstract |
We report a study of scattering dynamics in crystals employing momentum-resolved scanning transmission
electron microscopy under varying illumination conditions. As we perform successive changes of the probe
focus, multiple real-space signals are obtained in dependence of the shape of the incident electron wave.
With support from extensive simulations, each signal is shown to be characterised by an optimum focus for
which the contrast is maximum and which differs among different signals. For instance, a systematic focus
mismatch is found between images formed by high-angle scattering, being sensitive to thickness and chemical
composition, and the first moment in diffraction space, being sensitive to electric fields. It follows that a single
recording at one specific probe focus is usually insufficient to characterise materials comprehensively. Most
importantly, we demonstrate in experiment and simulation that the second moment ( |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
|
| |
Language |
|
Wos |
000734396800009 |
Publication Date |
2021-11-13 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0304-3991 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
2.2 |
Times cited |
|
Open Access |
OpenAccess |
|
| |
Notes |
We thank Dr. Florian Winkler for valuable discussions and experimental work at the early stages of this study. This work was supported by the Initiative and Network Fund of the Helmholtz Association (Germany) under contracts VH-NG-1317 and ZT-I-0025. This project furthermore received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 770887). |
Approved |
Most recent IF: 2.2 |
|
| |
Call Number |
EMAT @ emat @c:irua:184833 |
Serial |
6898 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Velazco, A.; Béché, A.; Jannis, D.; Verbeeck, J. |
|
| |
Title |
Reducing electron beam damage through alternative STEM scanning strategies, Part I: Experimental findings |
Type |
A1 Journal article |
| |
Year |
2022 |
Publication |
Ultramicroscopy |
Abbreviated Journal |
Ultramicroscopy |
|
| |
Volume |
232 |
Issue |
|
Pages |
113398 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
The highly energetic electrons in a transmission electron microscope (TEM) can alter or even completely destroy the structure of samples before sufficient information can be obtained. This is especially problematic in the case of zeolites, organic and biological materials. As this effect depends on both the electron beam and the sample and can involve multiple damage pathways, its study remained difficult and is plagued with irreproducibility issues, circumstantial evidence, rumors, and a general lack of solid data. Here we take on the experimental challenge to investigate the role of the STEM scan pattern on the damage behavior of a commercially available zeolite sample with the clear aim to make our observations as reproducible as possible. We make use of a freely programmable scan engine that gives full control over the tempospatial distribution of the electron probe on the sample and we use its flexibility to obtain multiple repeated experiments under identical conditions comparing the difference in beam damage between a conventional raster scan pattern and a newly proposed interleaved scan pattern that provides exactly the same dose and dose rate and visits exactly the same scan points. We observe a significant difference in beam damage for both patterns with up to 11 % reduction in damage (measured from mass loss). These observations demonstrate without doubt that electron dose, dose rate and acceleration voltage are not the only parameters affecting beam damage in (S)TEM experiments and invite the community to rethink beam damage as an unavoidable consequence of applied electron dose. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
|
| |
Language |
|
Wos |
000714819200002 |
Publication Date |
2021-10-02 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0304-3991 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
2.2 |
Times cited |
18 |
Open Access |
OpenAccess |
|
| |
Notes |
A.V., D.J., A.B. and J.V. acknowledge funding from FWO project G093417N (’Compressed sensing enabling low dose imaging in transmission electron microscopy’) and G042920N (’Coincident event detection for advanced spectroscopy in transmission electron microscopy’). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 823717 ESTEEM3. The Qu-Ant-EM microscope was partly funded by the Hercules fund from the Flemish Government. J.V. acknowledges funding from GOA project “Solarpaint” of the University of Antwerp.; JRA; reported |
Approved |
Most recent IF: 2.2 |
|
| |
Call Number |
EMAT @ emat @c:irua:183282 |
Serial |
6818 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Montoya, E.; Bals, S.; Van Tendeloo, G. |
|
| |
Title |
Redeposition and differential sputtering of La in transmission electron microscopy samples of LaAIO3/SrTiO3 multilayers prepared by focused ion beam |
Type |
A1 Journal article |
| |
Year |
2008 |
Publication |
Journal of microscopy |
Abbreviated Journal |
J Microsc-Oxford |
|
| |
Volume |
231 |
Issue |
3 |
Pages |
359-363 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
|
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
| |
Language |
|
Wos |
000259611000001 |
Publication Date |
2008-08-28 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0022-2720;1365-2818; |
ISBN |
|
Additional Links |
UA library record; WoS full record |
|
| |
Impact Factor |
1.692 |
Times cited |
|
Open Access |
|
|
| |
Notes |
The authors are grateful to M. Huijben and G. Rijnders of the MESA+ group at the University of Twente (NI) for the growth of the multilayers. This work has been performed under the Interuniversity Attraction Poles programme – Belgian State Belgian Science Policy. The authors acknowledge financial support from the European Union under the framework 6 program under a contract for an Integrated Infrastructure initiative. Part of this work was performed with financial support from the European Union under the framework 6 programme, under a contract for an Integrated Infrastructure Initiative (Reference No. 02601.9 ESTEEM). |
Approved |
Most recent IF: 1.692; 2008 IF: 1.409 |
|
| |
Call Number |
UA @ lucian @ c:irua:76522 |
Serial |
2849 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Huvé, M.; Van Tendeloo, G.; Hervieu, M.; Maignan, A.; Raveau, B. |
|
| |
Title |
Structural and physical properties of the new superconductor Hg0.5Pb0.5Sr4-xBaxCu2(CO3)O7-\delta |
Type |
A1 Journal article |
| |
Year |
1994 |
Publication |
Physica: C : superconductivity |
Abbreviated Journal |
Physica C |
|
| |
Volume |
231 |
Issue |
|
Pages |
15-20 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
|
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
A1994PJ98200004 |
Publication Date |
2002-10-17 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0921-4534; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
0.942 |
Times cited |
14 |
Open Access |
|
|
| |
Notes |
|
Approved |
|
|
| |
Call Number |
UA @ lucian @ c:irua:10035 |
Serial |
3201 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Ilin, A.; Martyshov, M.; Forsh, E.; Forsh, P.; Rumyantseva, M.; Abakumov, A.; Gaskov, A.; Kashkarov, P. |
|
| |
Title |
UV effect on NO2 sensing properties of nanocrystalline In2O3 |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Sensors and actuators : B : chemical |
Abbreviated Journal |
Sensor Actuat B-Chem |
|
| |
Volume |
231 |
Issue |
231 |
Pages |
491-496 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
Nanocrystalline indium oxide films with extremely small grains in range of 7-40 nm are prepared by sol-gel method. The influence of grain size on the sensitivity of indium oxide to nitrogen dioxide in low concentration at room temperature is investigated under the UV illumination and without illumination. The sensitivity increases with the decrease of grain sizes when In2O3 is illuminated while in the dark In2O3 with intermediate grain size exhibits the highest response. An explanation of the different behavior of the In2O3 with different grain size sensitivity to NO2 under illumination and in the dark is proposed. We demonstrate that pulsed illumination may be used for NO2 detection at room temperature that significantly reduces the power consumption of sensor. (C) 2016 Elsevier B.V. All rights reserved. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
|
| |
Language |
|
Wos |
000374330900055 |
Publication Date |
2016-03-16 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0925-4005 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
5.401 |
Times cited |
27 |
Open Access |
|
|
| |
Notes |
|
Approved |
Most recent IF: 5.401 |
|
| |
Call Number |
UA @ lucian @ c:irua:133630 |
Serial |
4273 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Madsen, J.; Pennycook, T.J.; Susi, T. |
|
| |
Title |
ab initio description of bonding for transmission electron microscopy |
Type |
A1 Journal article |
| |
Year |
2021 |
Publication |
Ultramicroscopy |
Abbreviated Journal |
Ultramicroscopy |
|
| |
Volume |
231 |
Issue |
|
Pages |
|
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
The simulation of transmission electron microscopy (TEM) images or diffraction patterns is often required to interpret their contrast and extract specimen features. This is especially true for high-resolution phase-contrast imaging of materials, but electron scattering simulations based on atomistic models are widely used in materials science and structural biology. Since electron scattering is dominated by the nuclear cores, the scattering potential is typically described by the widely applied independent atom model. This approximation is fast and fairly accurate, especially for scanning TEM (STEM) annular dark-field contrast, but it completely neglects valence bonding and its effect on the transmitting electrons. However, an emerging trend in electron microscopy is to use new instrumentation and methods to extract the maximum amount of information from each electron. This is evident in the increasing popularity of techniques such as 4D-STEM combined with ptychography in materials science, and cryogenic microcrystal electron diffraction in structural biology, where subtle differences in the scattering potential may be both measurable and contain additional insights. Thus, there is increasing interest in electron scattering simulations based on electrostatic potentials obtained from first principles, mainly via density functional theory, which was previously mainly required for holography. In this Review, we discuss the motivation and basis for these developments, survey the pioneering work that has been published thus far, and give our outlook for the future. We argue that a physically better justified ab initio description of the scattering potential is both useful and viable for an increasing number of systems, and we expect such simulations to steadily gain in popularity and importance. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
|
| |
Language |
|
Wos |
000744190300006 |
Publication Date |
2021-03-18 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0304-3991 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
2.843 |
Times cited |
|
Open Access |
OpenAccess |
|
| |
Notes |
|
Approved |
Most recent IF: 2.843 |
|
| |
Call Number |
UA @ admin @ c:irua:183955 |
Serial |
6850 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Gheysen, J.; Kashiwar, A.; Idrissi, H.; Villanova, J.; Simar, A. |
|
| |
Title |
Suppressing hydrogen blistering in a magnesium-rich healable laser powder bed fusion aluminum alloy analyzed by in-situ high resolution techniques |
Type |
A1 Journal article |
| |
Year |
2023 |
Publication |
Materials & design |
Abbreviated Journal |
|
|
| |
Volume |
231 |
Issue |
|
Pages |
112024-11 |
|
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
Hydrogen blistering, i.e. precipitation of supersaturated hydrogen at elevated temperatures, increases porosity during heat treatments in 4xxx series Al alloys manufactured by laser powder bed fusion (LPBF), as demonstrated by 3D X-ray nano-imaging in AlSi12. This paper proposes the design of a healable Al alloy to suppress hydrogen blistering and improve the damage management. The strategy consists of solute atoms diffusing towards nano-voids and precipitating on their surface, thereby filling the damage sites. A new healable Al alloy was thus developed and successfully manufactured by LPBF. 3D X-ray nano-imaging evidenced that the addition of Mg in 4xxx series Al alloys suppresses the hydrogen blistering. This is expectedly due to Mg in solid solution which increases the hydrogen solubility in the Al matrix and due to the healing of these hydrogen pores. Moreover, a significant healing of voids smaller than 500 nm diameter is observed. In-situ heating inside transmission electron microscopy pointed out that Al matrix diffuses inside the fractured Mg2Si particles, thereby demonstrating the healing ability of the new alloy. This has opened the doors to development of new healable Al alloys manufactured by LPBF as well as to new post-treatments to tailor mechanical properties and microstructure without hydrogen blistering. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
|
| |
Language |
|
Wos |
001055174900001 |
Publication Date |
2023-05-20 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0264-1275; 1873-4197 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
8.4 |
Times cited |
|
Open Access |
OpenAccess |
|
| |
Notes |
|
Approved |
Most recent IF: 8.4; 2023 IF: 4.364 |
|
| |
Call Number |
UA @ admin @ c:irua:196536 |
Serial |
8939 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Van Rompaey, S.; Dachraoui, W.; Turner, S.; Podyacheva, O.Y.; Tan, H.; Verbeeck, J.; Abakumov, A.; Hadermann, J. |
|
| |
Title |
Layered oxygen vacancy ordering in Nb-doped SrCo1-xFexO3-\delta perovskite |
Type |
A1 Journal article |
| |
Year |
2013 |
Publication |
Zeitschrift für Kristallographie |
Abbreviated Journal |
Z Krist-Cryst Mater |
|
| |
Volume |
228 |
Issue |
1 |
Pages |
28-34 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
The crystal structure of SrCo0.7Fe0.2Nb0.1O2.72 was determined using a combination of precession electron diffraction (PED), high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) and spatially resolved electron energy loss spectroscopy (STEM-EELS). The structure has a tetragonal P4/mmm symmetry with cell parameters a = b = a(p), c = 2a(p) (a(p) being the cell parameter of the perovskite parent structure). Octahedral BO2 layers alternate with the anion-deficient BO1.4 layers, the different B cations are randomly distributed over both layers. The specific feature of the SrCo0.7Fe0.2NB0.1O2.72 microstructure is a presence of extensive nanoscale twinning resulting in domains with alignment of the tetragonal c-axis along all three cubic direction of the perovskite subcell. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
München |
Editor |
|
|
| |
Language |
|
Wos |
000315475900004 |
Publication Date |
2013-01-24 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
2194-4946; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
3.179 |
Times cited |
9 |
Open Access |
|
|
| |
Notes |
Fwo; Countatoms |
Approved |
Most recent IF: 3.179; 2013 IF: NA |
|
| |
Call Number |
UA @ lucian @ c:irua:107698UA @ admin @ c:irua:107698 |
Serial |
1808 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Klingstedt, M.; Sundberg, M.; Eriksson, L.; Haigh, S.; Kirkland, A.; Grüner, D.; de Backer, A.; Van Aert, S.; Tarasaki, O. |
|
| |
Title |
Exit wave reconstruction from focal series of HRTEM images, single crystal XRD and total energy studies on SbxWO3+y (x\sim0.11) |
Type |
A1 Journal article |
| |
Year |
2012 |
Publication |
Zeitschrift für Kristallographie |
Abbreviated Journal |
Z Krist-Cryst Mater |
|
| |
Volume |
227 |
Issue |
6 |
Pages |
341-349 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
A new tungsten bronze in the SbWO system has been prepared in a solid state reaction from Sb2O3, WO3 and W metal powder. The average structure was determined by single crystal X-ray diffraction. SbxWO3+y (x ∼ 0.11) crystallizes in the orthorhombic space group Pm21n (no. 31), a = 27.8135(9) Å, b = 7.3659(2) Å and c = 3.8672(1) Å. The structure belongs to the (n)-ITB class of intergrowth tungsten bronzes. It contains slabs of hexagonal channels formed by six WO6 octahedra. These slabs are separated by three layers of WO6 octahedra that are arranged in a WO3-type fashion. The WO6 octahedra share all vertices to build up a three-dimensional framework. The hexagonal channels are filled with Sb atoms to ∼80% and additional O atoms. The atoms are shifted out of the center of the channels. Exit-wave reconstruction of focal series of high resolution-transmission-electron-microscope (HRTEM) images combined with statistical paramäeter estimation techniques allowed to study local ordering in the channels. Sb atoms in neighbouring channels tend to be displaced in the same direction, which is in agreement with total energy calculations on ordered structure models, but the ratio of the occupation of the two possible Sb sites varies from channel to channel. The structure of SbxWO3+y exhibits pronounced local modulations. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
München |
Editor |
|
|
| |
Language |
|
Wos |
000307314200003 |
Publication Date |
2012-06-06 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
2194-4946; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
3.179 |
Times cited |
4 |
Open Access |
|
|
| |
Notes |
Fwo; Esteem 026019 |
Approved |
Most recent IF: 3.179; 2012 IF: NA |
|
| |
Call Number |
UA @ lucian @ c:irua:101218 |
Serial |
1131 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Lei, C.H.; Van Tendeloo, G.; Lisoni, J.G.; Siegert, M.; Schubert, J. |
|
| |
Title |
Growth kinetic of MgO film on r-plane of sapphire: microstructural study |
Type |
A1 Journal article |
| |
Year |
2001 |
Publication |
Journal of crystal growth |
Abbreviated Journal |
J Cryst Growth |
|
| |
Volume |
226 |
Issue |
2/3 |
Pages |
419-429 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
|
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
000169535100029 |
Publication Date |
2002-07-26 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0022-0248; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
1.751 |
Times cited |
7 |
Open Access |
|
|
| |
Notes |
|
Approved |
Most recent IF: 1.751; 2001 IF: 1.283 |
|
| |
Call Number |
UA @ lucian @ c:irua:54783 |
Serial |
1391 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Koo, J.; Dahl, A.B.; Bærentzen, J.A.; Chen, Q.; Bals, S.; Dahl, V.A. |
|
| |
Title |
Shape from projections via differentiable forward projector for computed tomography |
Type |
A1 Journal article |
| |
Year |
2021 |
Publication |
Ultramicroscopy |
Abbreviated Journal |
Ultramicroscopy |
|
| |
Volume |
224 |
Issue |
|
Pages |
113239 |
|
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
In computed tomography, the reconstruction is typically obtained on a voxel grid. In this work, however, we propose a mesh-based reconstruction method. For tomographic problems, 3D meshes have mostly been studied to simulate data acquisition, but not for reconstruction, for which a 3D mesh means the inverse process of estimating shapes from projections. In this paper, we propose a differentiable forward model for 3D meshes that bridge the gap between the forward model for 3D surfaces and optimization. We view the forward projection as a rendering process, and make it differentiable by extending recent work in differentiable rendering. We use the proposed forward model to reconstruct 3D shapes directly from projections. Experimental results for single-object problems show that the proposed method outperforms traditional voxel-based methods on noisy simulated data. We also apply the proposed method on electron tomography images of nanoparticles to demonstrate the applicability of the method on real data. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
|
| |
Language |
|
Wos |
000744576800008 |
Publication Date |
2021-03-11 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0304-3991 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
2.843 |
Times cited |
3 |
Open Access |
OpenAccess |
|
| |
Notes |
EU Horizon 2020 MSCA Innovative Training Network MUMMERING Grant Number 765604. |
Approved |
Most recent IF: 2.843 |
|
| |
Call Number |
EMAT @ emat @c:irua:183267 |
Serial |
6825 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Van Tendeloo, G.; Chaillout, C.; Capponi, J.J.; Marezio, M.; Antipov, E.V. |
|
| |
Title |
Atomic structure and defect structure of the superconducting HgBa2Can-1CunO2n+2+\delta homologous series |
Type |
A1 Journal article |
| |
Year |
1994 |
Publication |
Physica: C : superconductivity |
Abbreviated Journal |
Physica C |
|
| |
Volume |
223 |
Issue |
3/4 |
Pages |
219-226 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
The perfect as well as the defect structure of several members of the superconducting family HgBa2Can-1CunO2n+2+delta have been studied in detail by electron diffraction and high-resolution electron microscopy Identification of the cation configuration is possible, even in the defect regions, with the help of computer simulations. The fine structure of several defects is analyzed in detail, the most common defect being the intergrowth of slabs corresponding to different n values in the title formula. In general, however, the crystals are of a high perfection, particularly for the lower n members. The occurrence of double (HgO)delta layers is seen occasionally, indicating the possible existence of a material with a double mercury layer. Some of these defects are possibly related to recently discovered anomalies at 250 K in these compounds. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
A1994NG47600003 |
Publication Date |
2002-10-17 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0921-4534; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
0.942 |
Times cited |
30 |
Open Access |
|
|
| |
Notes |
|
Approved |
no |
|
| |
Call Number |
UA @ lucian @ c:irua:10028 |
Serial |
196 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Yang, Z.; Schryvers, D.; Roels, F.; d' Haese, P.C.; de Broe, M.E. |
|
| |
Title |
Demonstration of lanthanum in liver cells by energy-dispersive X-ray spectroscopy, electron energy loss spectroscopy and high-resolution transmission electron microscopy |
Type |
A1 Journal article |
| |
Year |
2006 |
Publication |
Journal of microscopy |
Abbreviated Journal |
J Microsc-Oxford |
|
| |
Volume |
223 |
Issue |
2 |
Pages |
133-139 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Pathophysiology |
|
| |
Abstract |
|
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
| |
Language |
|
Wos |
000239702700006 |
Publication Date |
2006-08-10 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0022-2720;1365-2818; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
1.692 |
Times cited |
29 |
Open Access |
|
|
| |
Notes |
|
Approved |
Most recent IF: 1.692; 2006 IF: 1.947 |
|
| |
Call Number |
UA @ lucian @ c:irua:59109 |
Serial |
633 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Ivanov, V.; Nagy, J.B.; Lambin, P.; Lucas, A.; Zhang, X.B.; Zhang, X.F.; Bernaerts, D.; Van Tendeloo, G.; Amelinckx, S.; van Landuyt, J. |
|
| |
Title |
The study of carbon nanotubes produced by catalytic method |
Type |
A1 Journal article |
| |
Year |
1994 |
Publication |
Chemical physics letters |
Abbreviated Journal |
Chem Phys Lett |
|
| |
Volume |
223 |
Issue |
|
Pages |
329-335 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
|
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
A1994NT08000011 |
Publication Date |
0000-00-00 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0009-2614 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
1.897 |
Times cited |
405 |
Open Access |
|
|
| |
Notes |
|
Approved |
PHYSICS, APPLIED 28/145 Q1 # |
|
| |
Call Number |
UA @ lucian @ c:irua:10002 |
Serial |
3326 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Ivanov, V.; Nagy, J.B.; Lambin, P.; Lucas, A.; Zhang, X.B.; Zhang, X.F.; Bernaerts, D.; Van Tendeloo, G.; Amelinckx, S.; van Landuyt, J. |
|
| |
Title |
The study of carbon nanotubules produced by catalytic method |
Type |
A1 Journal article |
| |
Year |
1994 |
Publication |
Chemical physics letters |
Abbreviated Journal |
Chem Phys Lett |
|
| |
Volume |
223 |
Issue |
4 |
Pages |
329-335 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
Catalytic methods for the production of carbon nanotubules have been developed based on the decomposition of acetylene on well-dispersed metal particles strongly adsorbed on a support. Cobalt on silica was found to be the best catalyst-support combination for the production of graphitic tubules. The method for the catalyst preparation and the reaction conditions were optimized. Straight and coiled carbon tubules were obtained with inner and outer diameter of 3-7 and 15-20 nm, respectively, and up to 30 mum in length. These nanotubules were not coated by amorphous carbon. Traces of amorphous carbon could be removed by hydrogen. High resolution electron microscopy images and electron diffraction patterns of the straight nanotubules were similar to those obtained by the arc-discharge method. Coiled nanotubules were revealed by TEM to be regular polygonized helices where the bends are caused by pairs of pentagon-heptagon carbon rings among the hexagonal network. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
A1994NT08000011 |
Publication Date |
2002-07-25 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0009-2614; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
1.897 |
Times cited |
405 |
Open Access |
|
|
| |
Notes |
|
Approved |
PHYSICS, APPLIED 47/145 Q2 # |
|
| |
Call Number |
UA @ lucian @ c:irua:99869 |
Serial |
3595 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Martin, C.; Hervieu, M.; Huvé, M.; Michel, C.; Maignan, A.; Van Tendeloo, G.; Raveau, B. |
|
| |
Title |
Lead-mercury based superconductors: the 1212 cuprate Pb0.7Hg0.3Sr2+xCa0.7Nd0.3-xCu2O7-\delta and the new oxycarbonate Pb0.7Hg0.3Sr4Cu2CO3O7 |
Type |
A1 Journal article |
| |
Year |
1994 |
Publication |
Physica C-Superconductivity And Its Applications |
Abbreviated Journal |
Physica C |
|
| |
Volume |
222 |
Issue |
|
Pages |
19-26 |
|
| |
Keywords |
A1 Journal article; Electron Microscopy for Materials Science (EMAT); |
|
| |
Abstract |
|
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
A1994NB49400004 |
Publication Date |
0000-00-00 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0921-4534 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
0.942 |
Times cited |
49 |
Open Access |
|
|
| |
Notes |
|
Approved |
no |
|
| |
Call Number |
UA @ lucian @ c:irua:10027 |
Serial |
1812 |
|
| Permanent link to this record |
| |
|
| |
|
Author |
Martin, C.; Hervieu, M.; Huvé, M.; Michel, C.; Maignan, A.; Van Tendeloo, G.; Raveau, B. |
|
| |
Title |
Lead-mercury-based superconductors – the 1212-cuprate Pb0.7Hg0.3Sr2+xCa0.7Nd0.3-xCu2O7-\delta and the new oxycarbonate Pb0.7Hg0.3Sr4Cu2CO3O7 |
Type |
A1 Journal article |
| |
Year |
1994 |
Publication |
Physica: C : superconductivity |
Abbreviated Journal |
Physica C |
|
| |
Volume |
222 |
Issue |
1-2 |
Pages |
19-26 |
|
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
| |
Abstract |
A new superconducting mercury oxycarbonate, Pb0.7Hg0.3Sr4Cu2CO3O7, has been synthesized. This tetragonal phase (a = 3.824 angstrom, c= 16.468 angstrom) consists of an intergrowth of two nonsuperconducting compounds, Sr2CuO2CO3 and Pb0.7Hg0.3Sr2CuO5. It exhibits after optimization a critical temperature of 70 K, with a sharp transition and a superconducting volume fraction of 50%. Its behavior can be compared to that of thallium oxycarbonates previously isolated. This study is completed by a reinvestigation of the 1212 cuprate of the system Hg-Pb-Sr-Ca-Nd-Cu. A superconducting phase with the 1212 structure, similar to that previously obtained but with a significantly different composition, Pb0.7Hg0.3Sr2+xCa0.7Nd0.3-xCu2O7, has been obtained, with a T(c onset) of 100 K. The behavior of the latter is compared with other lead-based 1212 cuprates. |
|
| |
Address |
|
|
| |
Corporate Author |
|
Thesis |
|
|
| |
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
| |
Language |
|
Wos |
A1994NB49400004 |
Publication Date |
2002-10-17 |
|
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
|
| |
ISSN |
0921-4534; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
| |
Impact Factor |
0.942 |
Times cited |
49 |
Open Access |
|
|
| |
Notes |
|
Approved |
no |
|
| |
Call Number |
UA @ lucian @ c:irua:104517 |
Serial |
1813 |
|
| Permanent link to this record |
