NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	151–180 of 710 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 >>

List View

Citations

Details

	Records
	Author	Snoeckx, R.; Heijkers, S.; Van Wesenbeeck, K.; Lenaerts, S.; Bogaerts, A.
	Title	CO₂conversion in a dielectric barrier discharge plasma: N₂in the mix as a helping hand or problematic impurity?			Type	A1 Journal article
	Year	2016	Publication	Energy & environmental science	Abbreviated Journal	Energ Environ Sci
	Volume	9	Issue	9	Pages	999-1011
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Carbon dioxide conversion and utilization has gained significant interest over the years. A novel gas conversion technique with great potential in this area is plasma technology. A lot of research has already been performed, but mostly on pure gases. In reality, N2 will always be an important impurity in effluent gases. Therefore, we performed an extensive combined experimental and computational study on the effect of N2 in the range of 1–98% on CO2 splitting in dielectric barrier discharge (DBD) plasma. The presence of up to 50% N2 in the mixture barely influences the effective (or overall) CO2 conversion and energy efficiency, because the N2 metastable molecules enhance the absolute CO2 conversion, and this compensates for the lower CO2 fraction in the mixture. Higher N2 fractions, however, cause a drop in the CO2 conversion and energy efficiency. Moreover, in the entire CO2/N2 mixing ratio, several harmful compounds, i.e., N2O and NOx compounds, are produced in the range of several 100 ppm. The reaction pathways for the formation of these compounds are explained based on a kinetic analysis, which allows proposing solutions on how to prevent the formation of these harmful compounds.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000372243600030	Publication Date	2015-12-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1754-5692	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	29.518	Times cited	68	Open Access
	Notes	The authors acknowledge financial support from the IAP/7 (Inter-university Attraction Pole) program ‘PSI-Physical Chemistry of Plasma-Surface Interactions’, financially supported by the Belgian Federal Office for Science Policy (BELSPO), as well as the Fund for Scientific Research Flanders (FWO). This work was carried out in part using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI) and the University of Antwerp.			Approved	Most recent IF: 29.518
	Call Number	c:irua:133169			Serial	4020
Permanent link to this record



	Author	Penders, A.; Konstantinovic, M.J.; Bosch, R.W.; Schryvers, D.
	Title	Crack initiation in tapered high Si stainless steel specimens : stress threshold analyses			Type	A1 Journal article
	Year	2020	Publication	Corrosion Engineering Science And Technology	Abbreviated Journal	Corros Eng Sci Techn
	Volume		Issue		Pages	1-8
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Tapered specimens were used for an accelerated test technique to study the crack initiation of high Si stainless steel by means of constant elongation rate tensile testing in a simulated pressurised water reactor environment. Detailed crack density distributions were obtained by applying an advanced crack detection algorithm on iteratively displaced scanning electron microscopy pictures featuring stress corrosion cracks along the specimen's gauge length. By means of finite-element analysis, prominent peaks in the crack density graphs are demonstrated to be related to stress relief and stress build-up during the crack initiation phase. Intrinsic scatter related to the crack detection suggests that stress corrosion cracking is independent of the strain-rate for strain-rates lower than 10(-6 )s(-1). Based on the extrapolation to constant load conditions, the critical threshold value for the duplex high Si stainless steel is estimated to be around 580 MPa.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000549651600001	Publication Date	2020-06-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-422x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.8	Times cited	1	Open Access	Not_Open_Access
	Notes	; We would like to acknowledge ENGIE Electrabel for the financial support of this work under the contract number BSUEZ5500. ;			Approved	Most recent IF: 1.8; 2020 IF: 0.879
	Call Number	UA @ admin @ c:irua:171292			Serial	6478
Permanent link to this record



	Author	Jacques, P.; Verbist, K.; Lapin, J.; Ryelandt, L.; Van Tendeloo, G.; Delannay, F.
	Title	Critical assessment of the process of growth of a YBa₂Cu₃O_7-\delta layer on Y₂BaCuO₅			Type	A1 Journal article
	Year	1996	Publication	Superconductor science and technology	Abbreviated Journal	Supercond Sci Tech
	Volume	9	Issue		Pages	176-183
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	A1996TZ48100008	Publication Date	2002-08-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0953-2048;1361-6668;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.325	Times cited	1	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:15462			Serial	539
Permanent link to this record



	Author	Potapov, P.L.; Tirry, W.; Schryvers, D.; Sivel, V.G.M.; Wu, M.-Y.; Aslanidis, D.; Zandbergen, H.
	Title	Cross-section transmission electron microscopy characterization of the near-surface structure of medical Nitinol superelastic tubing			Type	A1 Journal article
	Year	2007	Publication	Journal of materials science: materials in medicine	Abbreviated Journal	J Mater Sci-Mater M
	Volume	18	Issue	3	Pages	483-492
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000244689700009	Publication Date	2007-02-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0957-4530;1573-4838;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.325	Times cited	14	Open Access
	Notes	Gao; Fwo			Approved	Most recent IF: 2.325; 2007 IF: 1.581
	Call Number	UA @ lucian @ c:irua:63484			Serial	547
Permanent link to this record



	Author	Van Vlierberghe, S.
	Title	Crosslinking strategies for porous gelatin scaffolds			Type	A1 Journal article
	Year	2016	Publication	Journal of materials science	Abbreviated Journal
	Volume	51	Issue	9	Pages	4349-4357
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	The present work reports on the application and the evaluation of a multitude of crosslinking approaches including high-energy irradiation, redox-initiating systems and conventional carbodiimide-coupling chemistry for frozen and/or freeze-dried porous gelatin scaffolds. The latter is particularly relevant for a plethora of biomedical applications such as tissue engineering supports, wound dressings, adhesive and absorbent pads for surgery, etc. Moreover, the results obtained for gelatin can be considered a proof-of-concept to be extrapolated to other polymer systems containing double bonds and/or amines and carboxylic acids to also realize scaffold crosslinking in dry or frozen state. The results showed that high-energy irradiation at -5 A degrees C enabled sufficient segmental mobility to induce chemical crosslinking after performing a cryogenic treatment of methacrylamide-modified gelatin scaffolds. Alternatively, although several redox-initiating systems were unable to chemically crosslink functionalized gelatin, the combination of ammonium persulphate and TEMED resulted in the formation of scaffolds with a reasonable gel fraction. Interestingly, carbodiimide-coupling was found suitable to crosslink freeze-dried gelatin matrices.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000370342100016	Publication Date	2016-01-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-2461	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:132277			Serial	7742
Permanent link to this record



	Author	Mihailescu, I.N.; Gyorgy, E.; Marin, G.; Popescu, M.; Teodorescu, V.S.; van Landuyt, J.; Grivas, C.; Hatziapostolou, A.
	Title	Crystalline structure of very hard tungsten carbide thin films obtained by reactive pulsed laser deposition			Type	A1 Journal article
	Year	1999	Publication	Journal of vacuum science and technology: A: vacuum surfaces and films	Abbreviated Journal	J Vac Sci Technol A
	Volume	17	Issue	1	Pages	249-255
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000078136300038	Publication Date	2002-07-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0734-2101;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.374	Times cited	8	Open Access
	Notes				Approved	Most recent IF: 1.374; 1999 IF: 1.742
	Call Number	UA @ lucian @ c:irua:29689			Serial	581
Permanent link to this record



	Author	van Landuyt, J.; Van Tendeloo, G.; Amelinckx, S.; Zhang, X.F.; Zhang, X.B.; Luyten, W.
	Title	Crystallography of fullerites and related graphene textures			Type	A1 Journal article
	Year	1994	Publication	Materials science forum	Abbreviated Journal
	Volume	150/151	Issue		Pages	53-64
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	A1994BC12F00004	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0255-5476; 1662-9752	ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:10001			Serial	590
Permanent link to this record



	Author	Bertrand, L.; Robinet, L.; Thoury, M.; Janssens, K.; Cohen, S.X.; Schöder, S.
	Title	Cultural heritage and archaeology materials studied by synchrotron spectroscopy and imaging			Type	A1 Journal article
	Year	2012	Publication	Applied physics A : materials science & processing	Abbreviated Journal	Appl Phys A-Mater
	Volume	106	Issue	2	Pages	377-396
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	The use of synchrotron radiation techniques to study cultural heritage and archaeological materials has undergone a steep increase over the past 10-15 years. The range of materials studied is very broad and encompasses painting materials, stone, glass, ceramics, metals, cellulosic and wooden materials, and a cluster of organic-based materials, in phase with the diversity observed at archaeological sites, museums, historical buildings, etc. Main areas of investigation are: (1) the study of the alteration and corrosion processes, for which the unique non-destructive speciation capabilities of X-ray absorption have proved very beneficial, (2) the understanding of the technologies and identification of the raw materials used to produce archaeological artefacts and art objects and, to a lesser extent, (3) the investigation of current or novel stabilisation, conservation and restoration practices. In terms of the synchrotron methods used, the main focus so far has been on X-ray techniques, primarily X-ray fluorescence, absorption and diffraction, and Fourier-transform infrared spectroscopy. We review here the use of these techniques from recent works published in the field demonstrating the breadth of applications and future potential offered by third generation synchrotron techniques. New developments in imaging and advanced spectroscopy, included in the UV/visible and IR ranges, could even broaden the variety of materials studied, in particular by fostering more studies on organic and complex organic-inorganic mixtures, while new support activities at synchrotron facilities might facilitate transfer of knowledge between synchrotron specialists and users from archaeology and cultural heritage sciences.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000299749000009	Publication Date	2011-11-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0947-8396	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.455	Times cited	55	Open Access
	Notes	; The authors acknowledge the critical reading by B. Berrie (National Gallery of Art, Washington DC, USA). We thank J. Mass (Conservation Department, Winterthur Museum and Country Estate, Winterthur, DE, USA), H. Roemich (Institute of Fine Arts, New York University, USA), J. Hiller (Non-Crystalline Diffraction Beamline, Diamond Light Source, Didcot, UK) and J.-P. Echard (Laboratoire de recherche et de restauration, Musee de la musique, Paris, France) for their comments on the presentation of their work in the manuscript. The IPANEMA platform is jointly developed by CNRS, MNHN, the French Ministry of Culture and Communication and SOLEIL, and benefits from a CPER grant (MESR, Region Ile-de-France). Support by the Access to Research Infrastructures activity in the 7th Framework Programme of the EU (CHARISMA Grant Agreement n. 228330) and the NWO Science4Arts programme are acknowledged. ;			Approved	Most recent IF: 1.455; 2012 IF: 1.545
	Call Number	UA @ admin @ c:irua:99166			Serial	5561
Permanent link to this record



	Author	Živanić, M.; Espona‐Noguera, A.; Lin, A.; Canal, C.
	Title	Current State of Cold Atmospheric Plasma and Cancer‐Immunity Cycle: Therapeutic Relevance and Overcoming Clinical Limitations Using Hydrogels			Type	A1 Journal article
	Year	2023	Publication	Advanced Science	Abbreviated Journal	Adv Sci
	Volume		Issue		Pages	2205803
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Cold atmospheric plasma (CAP) is a partially ionized gas that gains attention as a well-tolerated cancer treatment that can enhance anti-tumor immune responses, which are important for durable therapeutic effects. This review offers a comprehensive and critical summary on the current understanding of mechanisms in which CAP can assist anti-tumor immunity: induction of immunogenic cell death, oxidative post-translational modifications of the tumor and its microenvironment, epigenetic regulation of aberrant gene expression, and enhancement of immune cell functions. This should provide a rationale for the effective and meaningful clinical implementation of CAP. As discussed here, despite its potential, CAP faces different clinical limitations associated with the current CAP treatment modalities: direct exposure of cancerous cells to plasma, and indirect treatment through injection of plasma-treated liquids in the tumor. To this end, a novel modality is proposed: plasma-treated hydrogels (PTHs) that can not only help overcome some of the clinical limitations but also offer a convenient platform for combining CAP with existing drugs to improve therapeutic responses and contribute to the clinical translation of CAP. Finally, by integrating expertise in biomaterials and plasma medicine, practical considerations and prospective for the development of PTHs are offered.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000918224200001	Publication Date	2023-01-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2198-3844	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	15.1	Times cited		Open Access	OpenAccess
	Notes	European Research Council, 714793 ; Fonds Wetenschappelijk Onderzoek, 12S9221N G044420N ; Ministerio de Economía y Competitividad, PID2019‐103892RB‐I00/AEI/10.13039/501100011033 ;			Approved	Most recent IF: 15.1; 2023 IF: 9.034
	Call Number	PLASMANT @ plasmant @c:irua:193166			Serial	7238
Permanent link to this record



	Author	Yorulmaz, B.; Ozden, A.; Sar, H.; Ay, F.; Sevik, C.; Perkgoz, N.K.
	Title	CVD growth of monolayer WS2 through controlled seed formation and vapor density			Type	A1 Journal article
	Year	2019	Publication	Materials science in semiconductor processing	Abbreviated Journal
	Volume	93	Issue		Pages	158-163
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Large area, single layer WS2 has a high potential for use in optoelectrical devices with its high photo-luminescence intensity and low response time. In this work, we demonstrate a systematic study of controlled tungsten disulfide (WS2) monolayer growth using chemical vapor deposition (CVD) technique. With a detailed investigation of process parameters such as H-2 gas inclusion into the main carrier gas, growth temperature and duration, we have gained insight into two-dimensional (2D) WS2 synthesis through controlling the seed formations and the radical vapor density associated with WO3. We confirm that H-2 gas, when included to the carrier gas, is directly involved in WO3 reduction due to its reductive reagent nature, which provides a more effective sulfurization and monolayer formation process. Additionally, by changing the CVD growth configuration, hence, increasing the tungsten related vapor density and confining the reactant radicals, we succeed in realizing larger WS(2 )monolayers, which is still a technological challenge in order to utilize these structures for practical applications. Further optimization of the growth procedure is demonstrated by tuning the growth duration to prevent the excess seed formations and additional layers which will possibly limit the device performance of the monolayer flakes or films when applied.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000457727300018	Publication Date	2019-01-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1369-8001	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:193782			Serial	7748
Permanent link to this record



	Author	Ozkan, A.; Dufour, T.; Silva, T.; Britun, N.; Snyders, R.; Reniers, F.; Bogaerts, A.
	Title	DBD in burst mode: solution for more efficient CO₂conversion?			Type	A1 Journal article
	Year	2016	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	25	Issue	25	Pages	055005
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	CO2 conversion into value-added products has gained significant interest over the few last years, as the greenhouse gas concentrations constantly increase due to anthropogenic activities. Here we report on experiments for CO2 conversion by means of a cold atmospheric plasma using a cylindrical flowing dielectric barrier discharge (DBD) reactor. A detailed comparison of this DBD ignited in a so-called burst mode (i.e. where an AC voltage is applied during a limited amount of time) and pure AC mode is carried out to evaluate their effect on the conversion of CO2 as well as on the energy efficiency. Decreasing the duty cycle in the burst mode from 100% (i.e. corresponding to pure AC mode) to 40% leads to a rise in the conversion from 16–26% and to a rise in the energy efficiency from 15 to 23%. Based on a detailed electrical analysis, we show that the conversion correlates with the features of the microfilaments. Moreover, the root-mean-square voltage in the burst mode remains constant as a function of the process time for the duty cycles <70%, while a higher duty cycle or the usual pure AC mode leads to a clear voltage decay by more than 500 V, over approximately 90 s, before reaching a steady state regime. The higher plasma voltage in the burst mode yields a higher electric field. This causes the increasing the electron energy, and therefore their involvement in the CO2 dissociation process, which is an additional explanation for the higher CO2 conversion and energy efficiency in the burst mode.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000403945500005	Publication Date	2016-08-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1361-6595	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	17	Open Access
	Notes	The authors acknowledge financial support from the IAPVII/ 12, P7/34 (Inter-university Attraction Pole) program ‘PSI-Physical Chemistry of Plasma-Surface Interactions’, financially supported by the Belgian Federal Office for Science Policy (BELSPO). A. Ozkan would also like to thank financial support given by ‘Fonds David et Alice Van Buuren’.			Approved	Most recent IF: 3.302
	Call Number	c:irua:134841			Serial	4107
Permanent link to this record



	Author	Cagno, S.; Cosyns, P.; Izmer, A.; Vanhaecke, F.; Nys, K.; Janssens, K.
	Title	Deeply colored and black-appearing Roman glass : a continued research			Type	A1 Journal article
	Year	2014	Publication	Journal of archaeological science	Abbreviated Journal	J Archaeol Sci
	Volume	42	Issue		Pages	128-139
	Keywords	A1 Journal article; Philosophy; History; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	In the context of archaeological and historical assessment of Roman black-appearing glass, the chemical and physical characterization of a large collection of samples originating from various areas of the Roman Empire has been gathered over the past years to (i) verify whether a minor segment of the overall Roman glass production can help in determining possible diachronic changes in Roman imperial glass production (1st century AD – 5th century AD) and (ii) reveal regional compositional differences. In this paper, the latest results on the chemical composition of an additional 44 black-appearing Roman glass samples are presented, together with general conclusions based upon the entire compositional dataset of over 400 analyzed black glass samples. The results show that the Roman black glass is obtained through several glass compositions with a specific chronological, geographical and typological distribution. (C) 2013 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000332133100011	Publication Date	2013-11-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0305-4403	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.602	Times cited	18	Open Access
	Notes	; This research was supported by the Interuniversity Attraction Poles Programme – Belgian Science Policy (IUAP VI/16) and the Hercules fund, Brussels (grant A11/ 0387). The text also presents results of GOA “XANES meets ELNES” (Research Fund University of Antwerp, Belgium), FWO (Brussels, Belgium) projects no. G.0704.08 and G.01769.09, and VUB project OZR-BOF 1247. This work was partly supported by the Research Council of Norway through its Centres of Excellence funding scheme, project number 223268/F50. ;			Approved	Most recent IF: 2.602; 2014 IF: 2.196
	Call Number	UA @ admin @ c:irua:115865			Serial	5567
Permanent link to this record



	Author	Van Tendeloo, G.; Hervieu, M.; Chaillout, C.
	Title	Defect structure of Hg-based ceramic superconductors (invited)			Type	P1 Proceeding
	Year	1994	Publication	Sciences	Abbreviated Journal
	Volume		Issue		Pages	949-952
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	Editions physique	Place of Publication	Les ulis	Editor
	Language		Wos	A1994BE09Y00462	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2-86883-226-1	ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:95940			Serial	621
Permanent link to this record



	Author	Deveirman, A.; van Landuyt, J.; Vanhellemont, J.; Maes, H.E.; Yallup, K.
	Title	Defects in high-dose oxygen implanted silicon : a TEM study			Type	A1 Journal article
	Year	1991	Publication	Vacuum: the international journal and abstracting service for vacuum science and technology T2 – 1ST SIOMX WORKSHOP ( SEPARATION BY IMPLANTATION OF OXYGEN ) ( SWI-88 ), NOV 07-08, 1988, UNIV SURREY, GUILDFORD, ENGLAND	Abbreviated Journal	Vacuum
	Volume	42	Issue	5-6	Pages	367-369
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Results are discussed of a transmission electron microscopy study of high-dose oxygen implanted silicon. In addition to the general high temperature (> 1200-degrees-C) annealing treatments also annealings at 'low' temperatures (1000-1100-degrees-C) were performed in order to slow down the precipitate and defect reactions. The observed dissolution of the oxide precipitates during prolonged high temperature annealing is explained by critical radius considerations. Threading dislocations are the remaining lattice defects in the silicon overlayer and cannot be removed by further annealing. Low temperature annealing results in the formation and subsequent unfaulting of extrinsic stacking fault loops below the buried oxide layer.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	A1991EV61700007	Publication Date	2002-10-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0042-207X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.858	Times cited	4	Open Access
	Notes				Approved	MATERIALS SCIENCE, MULTIDISCIPLINARY 96/271 Q2 #
	Call Number	UA @ lucian @ c:irua:104022			Serial	629
Permanent link to this record



	Author	Potgieter-Vermaak, S.S.; Mmari, A.; Van Grieken, R.; McCrindle, R.I.; Potgieter, J.H.
	Title	Degradation of galvanised iron roofing material in Tanzania by atmospheric corrosion			Type	A1 Journal article
	Year	2011	Publication	Corrosion engineering science and technology	Abbreviated Journal
	Volume	46	Issue	5	Pages	642-650
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	Galvanised iron is popular in many applications, particular as a roofing material. However, just like other materials, especially metallic ones, it is prone to degradation by corrosion. In this particular study, the degradation of galvanised roof sheets was investigated at a coastal, urban and rural site in Tanzania, Africa. Samples were exposed to various outdoor environments over a period of 3 years. In addition, some accelerated laboratory investigations were conducted in different simulated air pollution environments in an artificial corrosion chamber constructed for this purpose to supplement the outdoor exposure tests. It was found that the combination of the tropical climate and increasing air pollution due to industrial development in the capital Dar-es-Salaam resulted in substantial atmospheric corrosion of the roof sheets, which eventually leads to failure and the necessity for replacement. The rural site had the lowest degree of atmospheric corrosion as expected. A combination of different corrosion products was identified as a result of the atmospheric corrosion by Raman and EDX analyses. The information gained from this investigation could be utilised to construct more durable structures requiring less frequent replacement and maintenance in future.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000294421100008	Publication Date	2010-04-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-422x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:92094			Serial	7758
Permanent link to this record



	Author	Ignatova, V.A.; Conard, T.; Möller, W.; Vandervorst, W.; Gijbels, R.
	Title	Depth profiling of ZrO₂/SiO₂/Si stacks : a TOF-SIMS and computer simulation study			Type	A1 Journal article
	Year	2004	Publication	Applied surface science	Abbreviated Journal	Appl Surf Sci
	Volume	231/232	Issue		Pages	603-608
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	This study is dedicated to a better understanding of the processes occurring under ion bombardment of ultra-thin ZrO2/SiO2/Si gate dielectric stacks. Complex-shaped depth profiles were obtained by using TOF-SIMS with dual beam (500 eV for sputtering and 10 keV for analysis) Ar+ ions. The SIMS intensities of all the elements depend critically on the amount of oxygen at any moment of the sputtering process. Increased intensity is observed at the surface and at the ZrO2/SiO2 interface. A long tail of the Zr signal is present in the Si substrate, even after the second (SiO2/Si) interface, and a double bump structure in the Zr-90 and ZrO dimer is observed, which is more pronounced with increasing thickness of the interfacial SiO2 layer. Computer simulations using the dynamic Monte Carlo code (TRIDYN) are performed in order to distinguish the ion bombardment-induced effects from changes in the ionization degree. The original code is extended with simple models for the ionization mechanism and for the molecular yield during sputtering. Oxygen preferential sputtering at the surface and ballistic transport of Zr towards and through the interface are clearly demonstrated, but there is also evidence that due to recoil implantation oxygen gets piled-up near the ZrO2/SiO2 interface. (C) 2004 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000222427700118	Publication Date	2004-05-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0169-4332;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.387	Times cited	4	Open Access
	Notes				Approved	Most recent IF: 3.387; 2004 IF: 1.497
	Call Number	UA @ lucian @ c:irua:51976			Serial	651
Permanent link to this record



	Author	Jalabert, D.; Pelloux-Gervais, D.; Béché, A.; Hartmann, J.M.; Gergaud, P.; Rouvière, J.L.; Canut, B.
	Title	Depth strain profile with sub-nm resolution in a thin silicon film using medium energy ion scattering			Type	A1 Journal article
	Year	2012	Publication	Physica Status Solidi A-Applications And Materials Science	Abbreviated Journal	Phys Status Solidi A
	Volume	209	Issue	2	Pages	265-267
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The depth strain profile in silicon from the Si (001) substrate to the surface of a 2 nm thick Si/12 nm thick SiGe/bulk Si heterostructure has been determined by medium energy ion scattering (MEIS). It shows with sub-nanometer resolution and high strain sensitivity that the thin Si cap presents residual compressive strain caused by Ge diffusion coming from the fully strained SiGe layer underneath. The strain state of the SiGe buffer have been checked by X-ray diffraction (XRD) and nano-beam electron diffraction (NBED) measurements.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000303382700005	Publication Date	2011-11-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1862-6300;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.775	Times cited	3	Open Access
	Notes				Approved	Most recent IF: 1.775; 2012 IF: 1.469
	Call Number	UA @ lucian @ c:irua:136430			Serial	4497
Permanent link to this record



	Author	Kolev, I.; Bogaerts, A.
	Title	Detailed numerical investigation of a DC sputter magnetron			Type	A1 Journal article
	Year	2006	Publication	IEEE transactions on plasma science	Abbreviated Journal	Ieee T Plasma Sci
	Volume	34	Issue	3	Pages	886-894
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000238582700019	Publication Date	2006-06-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0093-3813;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.052	Times cited	28	Open Access
	Notes				Approved	Most recent IF: 1.052; 2006 IF: 1.144
	Call Number	UA @ lucian @ c:irua:58198			Serial	667
Permanent link to this record



	Author	Brenker, F.E.; Vincze, L.; Vekemans, B.; Nasdala, L.; Stachel, T.; Vollmer, C.; Kersten, M.; Somogyi, A.; Adams, F.; Joswig, W.; Harris, J.W.
	Title	Detection of a Ca-rich lithology in the Earth's deep (> 300 km) convecting mantle			Type	A1 Journal article
	Year	2005	Publication	Earth and planetary science letters	Abbreviated Journal
	Volume	236	Issue	3/4	Pages	579-587
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000232047200003	Publication Date	2005-07-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0012-821x; 1385-013x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:54580			Serial	7772
Permanent link to this record



	Author	Kumar, J.; Eraña, H.; López-Martínez, E.; Claes, N.; Martín, V.F.; Solís, D.M.; Bals, S.; Cortajarena, A.L.; Castilla, J.; Liz-Marzán, L.M.
	Title	Detection of amyloid fibrils in Parkinson’s disease using plasmonic chirality			Type	A1 Journal article
	Year	2018	Publication	Proceedings of the National Academy of Sciences of the United States of America	Abbreviated Journal	P Natl Acad Sci Usa
	Volume	115	Issue	115	Pages	3225-3230
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Amyloid fibrils, which are closely associated with various neurodegenerative diseases, are the final products in many protein aggregation pathways. The identification of fibrils at low concentration is, therefore, pivotal in disease diagnosis and development of therapeutic strategies. We report a methodology for the specific identification of amyloid fibrils using chiroptical effects in plasmonic nanoparticles. The formation of amyloid fibrils based on α-synuclein was probed using gold nanorods, which showed no apparent interaction with monomeric proteins but effective adsorption onto fibril structures via noncovalent interactions. The amyloid structure drives a helical nanorod arrangement, resulting in intense optical activity at the surface plasmon resonance wavelengths. This sensing technique was successfully applied to human brain homogenates of patients affected by Parkinson’s disease, wherein protein fibrils related to the disease were identified through chiral signals from Au nanorods in the visible and near IR, whereas healthy brain samples did not exhibit any meaningful optical activity. The technique was additionally extended to the specific detection of infectious amyloids formed by prion proteins, thereby confirming the wide potential of the technique. The intense chiral response driven by strong dipolar coupling in helical Au nanorod arrangements allowed us to detect amyloid fibrils down to nanomolar concentrations.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000428382400032	Publication Date	2018-03-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0027-8424	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.661	Times cited	187	Open Access	OpenAccess
	Notes	We thank Prof. Dr. J.-P. Timmermans and the Antwerp Centre of Advanced Microscopy for providing access to the Tecnai G2 Spirit BioTWIN TEM. We also thank the Basque Biobank (Basque Foundation for Health Innovation and Research, BIOEF) for providing us with Parkinson’s disease-affected brain samples. J.K. acknowledges financial support from the European Commission under Marie Sklodowska-Curie Program H2020- MSCA-IF-2015708321. S.B. and A.L.C. acknowledge European Research Council Grants 335078 COLOURATOM and 648071 ProNANO. S.B. and L.M.L.-M. acknowledge funding from European Commission Grant EUSMI 731019. A.L.C., J.C., and L.M.L.-M. acknowledge funding from Spanish Ministry of Economy and Competitiveness (MINECO) Grants MAT2013-46101- R, AGL2015-65046-C2-1-R, and BIO2016-77367-C2-1-R. (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:restricted); saraecas; ECASSara;			Approved	Most recent IF: 9.661
	Call Number	EMAT @ emat @c:irua:150355UA @ admin @ c:irua:150355			Serial	4918
Permanent link to this record



	Author	Ro, C.-U.; Osán, J.; Szalóki, I.; Oh, K.-Y.; Kim, H.; Van Grieken, R.
	Title	Determination of chemical species in individual aerosol particles using ultrathin window EPMA			Type	A1 Journal article
	Year	2000	Publication	Environmental science and technology	Abbreviated Journal
	Volume	34	Issue		Pages	3023-3030
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000088156100023	Publication Date	2002-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-936x; 1520-5851	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:31660			Serial	7777
Permanent link to this record



	Author	Kolaitis, L.N.; Bruynseels, F.J.; Van Grieken, R.E.; Andreae, M.O.
	Title	Determination of methanesulfonic acid and non-sea-salt sulfate in single marine aerosol particles			Type	A1 Journal article
	Year	1989	Publication	Environmental science and technology	Abbreviated Journal
	Volume	23	Issue	2	Pages	236-240
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	A1989T024900023	Publication Date	2005-03-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-936x; 1520-5851	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:116813			Serial	7783
Permanent link to this record



	Author	Huygh, S.; Bogaerts, A.; van Duin, A.C.T.; Neyts, E.C.
	Title	Development of a ReaxFF reactive force field for intrinsic point defects in titanium dioxide			Type	A1 Journal article
	Year	2014	Publication	Computational materials science	Abbreviated Journal	Comp Mater Sci
	Volume	95	Issue		Pages	579-591
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A reactive ReaxFF force field is developed for studying the influence of intrinsic point defects on the chemistry with TiO2 condensed phases. The force field parameters are optimized to ab initio data for the equations of state, relative phase stabilities for titanium and titanium dioxide, potential energy differences for (TiO2)n-clusters (n = 116). Also data for intrinsic point defects in anatase were added. These data contain formation energies for interstitial titanium and oxygen vacancies, diffusion barriers of the oxygen vacancies and molecular oxygen adsorption on a reduced anatase (101) surface. Employing the resulting force field, we study the influence of concentration of oxygen vacancies and expansion or compression of an anatase surface on the diffusion of the oxygen vacancies. Also the barrier for oxygen diffusion in the subsurface region is evaluated using this force field. This diffusion barrier of 27.7 kcal/mol indicates that the lateral redistribution of oxygen vacancies on the surface and in the subsurface will be dominated by their diffusion in the subsurface, since both this barrier as well as the barriers for diffusion from the surface to the subsurface and vice versa (17.07 kcal/mol and 21.91 kcal/mol, respectively, as calculated with DFT), are significantly lower than for diffusion on the surface (61.12 kcal/mol as calculated with DFT).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000343781700077	Publication Date	2014-09-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0927-0256;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.292	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 2.292; 2014 IF: 2.131
	Call Number	UA @ lucian @ c:irua:119409			Serial	682
Permanent link to this record



	Author	Buysse, C.; Kovalevsky, A.; Snijkers, F.; Buekenhoudt, A.; Mullens, S.; Luyten, J.; Kretzschmar, J.; Lenaerts, S.
	Title	Development, performance and stability of sulfur-free, macrovoid-free BSCF capillaries for high temperature oxygen separation from air			Type	A1 Journal article
	Year	2011	Publication	Journal of membrane science	Abbreviated Journal	J Membrane Sci
	Volume	372	Issue	1/2	Pages	239-248
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Capture and storage of CO2 (CCS) from fossil-fuel power plants is vital in order to counteract a pending anthropogenic global warming. High temperature oxygen transport perovskite membranes can fulfill an important role in the separation of oxygen from air needed in the oxy-fuel technologies for CCS. In this study we present the development, performance and stability of gastight, macrovoid-free and sulfur-free Ba0.5Sr0.5Co0.8Fe0.2O3 − δ (BSCF) mixed conductor capillary membranes prepared by phase-inversion spinning and sintering. A sulfur-free phase-inversion polymer was chosen in order to obtain a phase-pure BSCF crystal phase. Special attention was given to the polymer solution and ceramic spinning suspension in order to avoid macrovoids and achieve gastight membranes. The sulfur-free BSCF capillaries showed an average 4-point bending strength of 64 ± 8 MPa and a maximum oxygen flux of not, vert, similar5.3 Nml/(cm2 min) at 950 °C for an argon sweep flow rate of 125 Nml/min. The comparison of the performance of sulfur-free and sulfur-containing BSCF capillaries with similar dimensions revealed a profound impact of the sulfur contamination on both the oxygen flux and the activation energy of the overall oxygen transport mechanism. Both long-term oxygen permeation at different temperatures and post-operation analysis of a sulfur-free BSCF capillary were performed and discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000289829200026	Publication Date	2011-02-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0376-7388	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.035	Times cited	32	Open Access
	Notes	; The authors want to express their thanks to the VITO staff for their continuous support, especially B. Molenberghs, W. Doyen, H. Beckers, R. Kemps, M. Mertens, M. Schoeters and H. Chen. C. Buysse thankfully acknowledges a PhD scholarship provided by VITO and the University of Antwerp. This work is performed in the framework of the German Helmholtz Alliance Project “MEM-BRAIN”, aiming at the development of gas separation membranes for zero-emission fossil fuel power plants. ;			Approved	Most recent IF: 6.035; 2011 IF: 3.850
	Call Number	UA @ admin @ c:irua:89916			Serial	5942
Permanent link to this record



	Author	Van Eynde, E.; Tytgat, T.; Smits, M.; Verbruggen, S.; Hauchecorne, B.; Blust, R.; Lenaerts, S.
	Title	Diatom silica-titania materials for photocatalytic air purification			Type	A2 Journal article
	Year	2013	Publication	Communications in agricultural and applied biological sciences	Abbreviated Journal
	Volume	1	Issue	1	Pages	141-147
	Keywords	A2 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1379-1176	ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:105334			Serial	5943
Permanent link to this record



	Author	Van Eynde, E.; Hu, Z.-Y.; Tytgat, T.; Verbruggen, S.W.; Watte, J.; Van Tendeloo, G.; Van Driessche, I.; Blust, R.; Lenaerts, S.
	Title	Diatom silica-titania photocatalysts for air purification by bio-accumulation of different titanium sources			Type	A1 Journal article
	Year	2016	Publication	Environmental science : nano	Abbreviated Journal	Environ Sci-Nano
	Volume	3	Issue	5	Pages	1052-1061
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	We present a green, biological production route for silica-titania photocatalysts using diatom microalgae. Diatoms are single-celled, eukaryotic microalgae (2-2000 mu m) that self-assemble soluble silicon (Si(OH)(4)) into intricate silica cell walls, called frustules. These diatom frustules are formed under ambient conditions and consist of hydrated silica with specific 3D morphologies and micro-meso or macroporosity. A remarkable characteristic of diatoms is their ability to bioaccumulate soluble titanium from cell culture medium and incorporate them into their nanostructured silica cell wall. Controlled cultivation of the diatom Pinnularia sp. on soluble titanium in a batch process resulted in the biological immobilisation of titanium dioxide in the porous 3D architecture of the frustules. Six different titanium sources are tested. The silica-titania frustules were isolated by treating the harvested Pinnularia cells with nitric acid (65%) or by high temperature treatment. Thermal annealing converted the amorphous titania into crystalline titania. The produced silica-titania material is evaluated towards photocatalytic activity for acetaldehyde (C2H4O) abatement. Frustules cultivated with TiBaldH showed the highest photocatalytic performance. Comparison of the photocatalytic activity with P25 reveals that P25 has a 4 fold higher photocatalytic activity, but when photocatalytic activity is normalized for titania content, the frustules show double activity. Further material characterization (morphology, crystallinity, surface area and elemental distribution) of the TiBaldH silica-titania frustules provides additional insight into their structure-activity relationship. These natural biosilicatitania materials have excellent properties for photocatalytic purposes, including high surface area (108 m(2) g(-1)) and good porosity, and show reliable immobilization of TiO2 in the ordered structure of the diatom frustule.
	Address
	Corporate Author				Thesis
	Publisher	Royal Society of Chemistry	Place of Publication	Cambridge	Editor
	Language		Wos	000385257900011	Publication Date	2016-07-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2051-8153; 2051-8161	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.047	Times cited	7	Open Access
	Notes	; ;			Approved	Most recent IF: 6.047
	Call Number	UA @ lucian @ c:irua:144751			Serial	4644
Permanent link to this record



	Author	De Bie, C.; Martens, T.; van Dijk, J.; Paulussen, S.; Verheyde, B.; Corthals, S.; Bogaerts, A.
	Title	Dielectric barrier discharges used for the conversion of greenhouse gases: modeling the plasma chemistry by fluid simulations			Type	A1 Journal article
	Year	2011	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	20	Issue	2	Pages	024008,1-024008,11
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The conversion of methane to value-added chemicals and fuels is considered to be one of the challenges of the 21st century. In this paper we study, by means of fluid modeling, the conversion of methane to higher hydrocarbons or oxygenates by partial oxidation with CO2 or O2 in a dielectric barrier discharge. Sixty-nine different plasma species (electrons, ions, molecules, radicals) are included in the model, as well as a comprehensive set of chemical reactions. The calculation results presented in this paper include the conversion of the reactants and the yields of the reaction products as a function of residence time in the reactor, for different gas mixing ratios. Syngas (i.e. H2 + CO) and higher hydrocarbons (C2Hx) are typically found to be important reaction products.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000290719900009	Publication Date	2011-04-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	38	Open Access
	Notes				Approved	Most recent IF: 3.302; 2011 IF: 2.521
	Call Number	UA @ lucian @ c:irua:87868			Serial	689
Permanent link to this record



	Author	Peerenboom, K.; Parente, A.; Kozák, T.; Bogaerts, A.; Degrez, G.
	Title	Dimension reduction of non-equilibrium plasma kinetic models using principal component analysis			Type	A1 Journal article
	Year	2015	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	24	Issue	24	Pages	025004
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The chemical complexity of non-equilibrium plasmas poses a challenge for plasma modeling because of the computational load. This paper presents a dimension reduction method for such chemically complex plasmas based on principal component analysis (PCA). PCA is used to identify a low-dimensional manifold in chemical state space that is described by a small number of parameters: the principal components. Reduction is obtained since continuity equations only need to be solved for these principal components and not for all the species. Application of the presented method to a CO2 plasma model including state-to-state vibrational kinetics of CO2 and CO demonstrates the potential of the PCA method for dimension reduction. A manifold described by only two principal components is able to predict the CO2 to CO conversion at varying ionization degrees very accurately.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000356816200008	Publication Date	2015-01-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.302; 2015 IF: 3.591
	Call Number	c:irua:123534			Serial	704
Permanent link to this record



	Author	Nematollahi, P.; Neyts, E.C.
	Title	Direct methane conversion to methanol on M and MN₄ embedded graphene (M = Ni and Si): a comparative DFT study			Type	A1 Journal article
	Year	2019	Publication	Applied surface science	Abbreviated Journal	Appl Surf Sci
	Volume	496	Issue	496	Pages	143618
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The ever increasing global production and dispersion of methane requires novel chemistry to transform it into easily condensable energy carriers that can be integrated into the chemical infrastructure. In this context, single atom catalysts have attracted considerable interest due to their outstanding catalytic activity. We here use density functional theory (DFT) computations to compare the reaction and activation energies of M and MN4 embedded graphene (M = Ni and Si) on the methane-to-methanol conversion near room temperature. Thermodynamically, conversion of methane to methanol is energetically favorable at ambient conditions. Both singlet and triplet spin state of the studied systems are considered in all of the calculations. The DFT results show that the barriers are significantly lower when the complexes are in the triplet state than in the singlet state. In particular, Si-G with the preferred spin multiplicity of triplet seems to be viable catalysts for methane oxidation thanks to the corresponding lower energy barriers and higher stability of the obtained configurations. Our results provide insights into the nature of methane conversion and may serve as guidance for fabricating cost-effective graphene-based single atom catalysts.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000488957400004	Publication Date	2019-08-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0169-4332	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.387	Times cited	2	Open Access
	Notes				Approved	Most recent IF: 3.387
	Call Number	UA @ admin @ c:irua:163695			Serial	6294
Permanent link to this record



	Author	Nistor, L.C.; van Landuyt, J.; Ralchenko, V.G.; Kononenko, T.V.; Obraztsova, E.D.; Strelnitsky, V.E.
	Title	Direct observation of laser-induced crystallization of a-C : H films			Type	A1 Journal article
	Year	1994	Publication	Applied physics A : materials science & processing	Abbreviated Journal
	Volume	58	Issue	2	Pages	137-144
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The post-growth modification of diamond-like amorphous hydrogenated carbon a-C:H films by laser treatment has been studied by transmission electron microscopy and Raman spectroscopy. a-C:H films grown on Si substrates by benzene decomposition in a rf glow discharge were irradiated with 15 ns pulses of a KrF-excimer laser with fluences in the ran e of E = 50-700 mJ/cm(2). At fluences below 100 mJ/cm(2) an increase in the number of graphitic clusters and in their ordering was evidenced from Raman spectra, while the film structure remained amorphous according to electron microscopy and electron diffraction observations. At higher fluences the appearance of diamond particles of 2-7 nm size, embedded into the lower crystallized graphitic matrix, was observed and simultaneously a progressive growth of graphite nanocrystals with dimensions from 2 nm to 4 nm was deduced from Raman measurements. The maximum thickness of the crystallized surface layer (approximate to 400 nm) and the degree of laser annealing are limited by the film ablation which starts at E > 250 mJ/cm(2). The laser-treated areas lose their chemical inertness. In particular, chemical etching in chromium acid becomes possible, which may be used for patterning the highly inert carbon films.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Heidelberg	Editor
	Language		Wos	A1994MU87700005	Publication Date	2004-10-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0721-7250;1432-0630;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	73	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:99924			Serial	718
Permanent link to this record