NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	1–30 of 67 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 >>

List View

Citations

Details

	Records
	Author	Uytdenhouwen, Y.; Van Alphen, S.; Michielsen, I.; Meynen, V.; Cool, P.; Bogaerts, A.
	Title	A packed-bed DBD micro plasma reactor for CO 2 dissociation: Does size matter?			Type	A1 Journal article
	Year	2018	Publication	Chemical engineering journal	Abbreviated Journal	Chem Eng J
	Volume	348	Issue		Pages	557-568
	Keywords	A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	DBD plasma reactors are of great interest for environmental and energy applications, such as CO2 conversion, but they suffer from limited conversion and especially energy efficiency. The introduction of packing materials has been a popular subject of investigation in order to increase the reactor performance. Reducing the discharge gap of the reactor below one millimetre can enhance the plasma performance as well. In this work, we combine both effects and use a packed-bed DBD micro plasma reactor to investigate the influence of gap size reduction, in combination with a packing material, on the conversion and efficiency of CO2 dissociation. Packing materials used in this work were SiO2, ZrO2, and Al2O3 spheres as well as glass wool. The results are compared to a regular size reactor as a benchmark. Reducing the discharge gap can greatly increase the CO2 conversion, although at a lower energy efficiency. Adding a packing material further increases the conversion when keeping a constant residence time, but is greatly dependent on the material composition, gap and sphere size used. Maximum conversions of 50–55% are obtained for very long residence times (30 s and higher) in an empty reactor or with certain packing material combinations, suggesting a balance in CO2 dissociation and recombination reactions. The maximum energy efficiency achieved is 4.3%, but this is for the regular sized reactor at a short residence time (7.5 s). Electrical characterization is performed to reveal some trends in the electrical behaviour of the plasma upon reduction of the discharge gap and addition of a packing material.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000434467000055	Publication Date	2018-05-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.216	Times cited	22	Open Access	Not_Open_Access: Available from 03.05.2020
	Notes	We acknowledge financial support from the European Fund for Regional Development through the cross-border collaborative Interreg V program Flanders-the Netherlands (project EnOp), the Fund for Scientific Research (FWO; Grant Number: G.0254.14N) and an IOF-SBO (SynCO2Chem) project from the University of Antwerp.			Approved	Most recent IF: 6.216
	Call Number	PLASMANT @ plasmant @c:irua:151238			Serial	4956
Permanent link to this record



	Author	Liu, S.; Wei, M.; Sui, X.; Cheng, X.; Cool, P.; Van Tendeloo, G.
	Title	A scanning electron microscopy study on hollow silica microspheres: defects and influences of the synthesis composition			Type	A1 Journal article
	Year	2009	Publication	Journal of sol-gel science and technology	Abbreviated Journal	J Sol-Gel Sci Techn
	Volume	49	Issue	3	Pages	373-379
	Keywords	A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Electron microscopy for materials research (EMAT)
	Abstract	Defects on hollow silica spheres synthesized in a tetraethylorthosilicate-octylamine-HCl-H2O system were recorded by scanning microscope. Based on the results, influences of synthesis composition on the formation of these defects are discussed. It is evidenced that products prepared with different octylamine-to-tetraethylorthosilicate ratios may have surface depressions, cracks and non-hollow microspheres. However, by changing water and acid additions, these defects could be reduced or eliminated. Generally, samples synthesized with a large octylamine addition commonly exhibit surface depressions. A small octylamine or a large water addition benefits the formation of solid silica microspheres among the product. Acid, although is not indispensable for the formation of hollow spheres, helps to eliminate or reduce depressions on the hollow shells. It is explained that the added acid gives rise to a relative localized fast hydrolysis versus condensation, facilitating an easy mobility of hydrolyzed silica species, and consequently the shell surface is smoothened.
	Address
	Corporate Author				Thesis
	Publisher	Kluwer	Place of Publication	Dordrecht	Editor
	Language		Wos	000263260100015	Publication Date	2008-12-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0928-0707;1573-4846;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.575	Times cited	1	Open Access
	Notes				Approved	Most recent IF: 1.575; 2009 IF: 1.393
	Call Number	UA @ lucian @ c:irua:74962			Serial	2941
Permanent link to this record



	Author	Kummamuru, N.B.; Watson, G.; Ciocarlan, R.-G.; Verbruggen, S.W.; Cool, P.; Van Der Voort, P.; Perreault, P.
	Title	Accelerated methane storage in clathrate hydrates using mesoporous (Organo-) silica materials			Type	A1 Journal article
	Year	2023	Publication	Fuel	Abbreviated Journal
	Volume	354	Issue		Pages	129403-129418
	Keywords	A1 Journal article; Engineering sciences. Technology; Laboratory of adsorption and catalysis (LADCA); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Methane (CH4) clathrate hydrates have gained much attention in the ever-growing search for novel energy storage methods; however, they are currently limited due to their poor water-to-hydrate conversions and slow formation kinetics. To surmount these bottlenecks, significant research has been centered on the design of novel methods (porous media). In this vein, the present work explores two hydrophobic mesoporous solids, an alkyl-grafted mesoporous silica (SBA-15 C8) and a periodic mesoporous organosilica (Ring-PMO), in their ability to promote CH4 clathrates. Both materials have shown to facilitate CH4 clathrate formation at mild operating conditions (6 MPa and 269–276 K). The study revealed that the maximal CH4 storage capacities are strongly linked to the critical/optimal quantity of water in the system which was determined to be at 130% and 200% of the pore volume for SBA-15 C8 and Ring-PMO, respectively. Up to 90% and 95% of the maximum water-to-hydrate conversions were achieved in 90 min at the lowest experimental temperature and critical water content for SBA-15 C8 and Ring-PMO, respectively. At these conditions, SBA-15 C8 and Ring-PMO showed a maximum gas uptake of 98.2 and 101.2 mmol CH4/mol H2O, respectively. Both the materials exhibited no chemical or morphological changes post-clathrate formations (characterized using FT-IR, N2 sorption, XRD, and TEM), inferring their viability as clathrate promoters for multiple cycles. An integrated multistep model was considered adequate for representing the hydrate crystallization kinetics and fits well with the experimental kinetic data with a low average absolute deviation in water-to-hydrate conversions among the three distinct kinetic models analyzed. Overall, the results from this study demonstrate hydrophobic porous materials as effective promoters of CH4 clathrates, which could make clathrate-based CH4 storage and transport technology industrially viable.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001059413200001	Publication Date	2023-08-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0016-2361	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.4	Times cited		Open Access	Not_Open_Access: Available from 07.02.2024
	Notes				Approved	Most recent IF: 7.4; 2023 IF: 4.601
	Call Number	UA @ admin @ c:irua:197987			Serial	8829
Permanent link to this record



	Author	Collart, O.; Cool, P.; van der Voort, P.; Meynen, V.; Vansant, E.F.; Houthoofd, K.J.; Grobet, P.J.; Lebedev, O.I.; Van Tendeloo, G.
	Title	Aluminum incorporation into MCM-48 toward the creation of Brønsted acidity			Type	A1 Journal article
	Year	2004	Publication	The journal of physical chemistry : B : condensed matter, materials, surfaces, interfaces and biophysical	Abbreviated Journal	J Phys Chem B
	Volume	108	Issue		Pages	13905-13912
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000224164000003	Publication Date	2004-09-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1520-6106;1520-5207;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.177	Times cited	13	Open Access
	Notes	Fwo; Iuap P5/01			Approved	Most recent IF: 3.177; 2004 IF: 3.834
	Call Number	UA @ lucian @ c:irua:49014			Serial	92
Permanent link to this record



	Author	Cambré, S.; Campo, J.; Beirnaert, C.; Verlackt, C.; Cool, P.; Wenseleers, W.
	Title	Asymmetric dyes align inside carbon nanotubes to yield a large nonlinear optical response			Type	A1 Journal article
	Year	2015	Publication	Nature nanotechnology	Abbreviated Journal	Nat Nanotechnol
	Volume	10	Issue	10	Pages	248-252
	Keywords	A1 Journal article; Engineering sciences. Technology; Nanostructured and organic optical and electronic materials (NANOrOPT); Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Asymmetric dye molecules have unusual optical and electronic properties1, 2, 3. For instance, they show a strong second-order nonlinear optical (NLO) response that has attracted great interest for potential applications in electro-optic modulators for optical telecommunications and in wavelength conversion of lasers2, 3. However, the strong Coulombic interaction between the large dipole moments of these molecules favours a pairwise antiparallel alignment that cancels out the NLO response when incorporated into bulk materials. Here, we show that by including an elongated dipolar dye (p,p′-dimethylaminonitrostilbene, DANS, a prototypical asymmetric dye with a strong NLO response4) inside single-walled carbon nanotubes (SWCNTs)5, 6, an ideal head-to-tail alignment in which all electric dipoles point in the same sense is naturally created. We have applied this concept to synthesize solution-processible DANS-filled SWCNTs that show an extremely large total dipole moment and static hyperpolarizability (β0 = 9,800 × 10−30 e.s.u.), resulting from the coherent alignment of arrays of ∼70 DANS molecules.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000350799700016	Publication Date	2015-02-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1748-3387;1748-3395;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	38.986	Times cited	46	Open Access
	Notes				Approved	Most recent IF: 38.986; 2015 IF: 34.048
	Call Number	c:irua:125405			Serial	158
Permanent link to this record



	Author	Zhuge, X.; Jinnai, H.; Dunin-Borkowski, R.E.; Migunov, V.; Bals, S.; Cool, P.; Bons, A.-J.; Batenburg, K.J.
	Title	Automated discrete electron tomography – Towards routine high-fidelity reconstruction of nanomaterials			Type	A1 Journal article
	Year	2017	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	175	Issue	175	Pages	87-96
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	Electron tomography is an essential imaging technique for the investigation of morphology and 3D structure of nanomaterials. This method, however, suffers from well-known missing wedge artifacts due to a restricted tilt range, which limits the objectiveness, repeatability and efficiency of quantitative structural analysis. Discrete tomography represents one of the promising reconstruction techniques for materials science, potentially capable of delivering higher fidelity reconstructions by exploiting the prior knowledge of the limited number of material compositions in a specimen. However, the application of discrete tomography to practical datasets remains a difficult task due to the underlying challenging mathematical problem. In practice, it is often hard to obtain consistent reconstructions from experimental datasets. In addition, numerous parameters need to be tuned manually, which can lead to bias and non-repeatability. In this paper, we present the application of a new iterative reconstruction technique, named TVR-DART, for discrete electron tomography. The technique is capable of consistently delivering reconstructions with significantly reduced missing wedge artifacts for a variety of challenging data and imaging conditions, and can automatically estimate its key parameters. We describe the principles of the technique and apply it to datasets from three different types of samples acquired under diverse imaging modes. By further reducing the available tilt range and number of projections, we show that the proposed technique can still produce consistent reconstructions with minimized missing wedge artifacts. This new development promises to provide the electron microscopy community with an easy-to-use and robust tool for high-fidelity 3D characterization of nanomaterials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000403342500008	Publication Date	2017-01-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	22	Open Access	OpenAccess
	Notes	This work has been supported in part by the Stichting voor de Technische Wetenschappen (STW) through a personal grant (Veni,13610), and was in part by ExxonMobil Chemical Europe Inc. The authors further acknowledge financial support from the University of Antwerp through BOF GOA funding. S.B. acknowledges financial support from the European Research Council (ERC Starting Grant #335078-COLOURATOMS). R.D.B. is grateful for funding from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007–2013)/ ERC grant agreement number 320832. Thomas Altantzis is gratefully acknowledged for acquiring the Anatase nanosheets dataset. (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot); saraecas; ECAS_Sara;			Approved	Most recent IF: 2.843
	Call Number	EMAT @ emat @ c:irua:141218UA @ admin @ c:irua:141218			Serial	4485
Permanent link to this record



	Author	Choukroun, D.; Daems, N.; Kenis, T.; Van Everbroeck, T.; Hereijgers, J.; Altantzis, T.; Bals, S.; Cool, P.; Breugelmans, T.
	Title	Bifunctional nickel-nitrogen-doped-carbon-supported copper electrocatalyst for CO₂ reduction			Type	A1 Journal article
	Year	2020	Publication	Journal Of Physical Chemistry C	Abbreviated Journal	J Phys Chem C
	Volume	124	Issue	124	Pages	1369-1381
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA); Applied Electrochemistry & Catalysis (ELCAT)
	Abstract	Bifunctionality is a key feature of many industrial catalysts, supported metal clusters and particles in particular, and the development of such catalysts for the CO2 reduction reaction (CO2RR) to hydrocarbons and alcohols is gaining traction in light of recent advancements in the field. Carbon-supported Cu nanoparticles are suitable candidates for integration in the state-of-the-art reaction interfaces, and here, we propose, synthesize, and evaluate a bifunctional Ni–N-doped-C-supported Cu electrocatalyst, in which the support possesses active sites for selective CO2 conversion to CO and Cu nanoparticles catalyze either the direct CO2 or CO reduction to hydrocarbons. In this work, we introduce the scientific rationale behind the concept, its applicability, and the challenges with regard to the catalyst. From the practical aspect, the deposition of Cu nanoparticles onto carbon black and Ni–N–C supports via an ammonia-driven deposition precipitation method is reported and explored in more detail using X-ray diffraction, thermogravimetric analysis, and hydrogen temperature-programmed reduction. High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and energy-dispersive X-ray spectroscopy (EDXS) give further evidence of the presence of Cu-containing nanoparticles on the Ni–N–C supports while revealing an additional relationship between the nanoparticle’s composition and the electrode’s electrocatalytic performance. Compared to the benchmark carbon black-supported Cu catalysts, Ni–N–C-supported Cu delivers up to a 2-fold increase in the partial C2H4 current density at −1.05 VRHE (C1/C2 = 0.67) and a concomitant 10-fold increase of the CO partial current density. The enhanced ethylene production metrics, obtained by virtue of the higher intrinsic activity of the Ni–N–C support, point out toward a synergistic action between the two catalytic functionalities.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000508467700015	Publication Date	2020-01-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447; 1932-7455	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.7	Times cited	24	Open Access	OpenAccess
	Notes	; N.D. acknowledges sponsoring from the research foundation of Flanders (FWO) in the frame of a postdoctoral grant (12Y3919N N.D.). J.H. greatly acknowledges the Research Foundation Flanders (FWO) for support through a postdoctoral fellowship (28761). T.V.E. and P.C. acknowledge financial support from the EU-Partial-PGMs project (H2020NMP-686086). The authors also acknowledge financial support from the university research fund (BOF-GOA PS ID No. 33928). ;			Approved	Most recent IF: 3.7; 2020 IF: 4.536
	Call Number	UA @ admin @ c:irua:165326			Serial	6286
Permanent link to this record



	Author	Beyers, E.; Biermans, E.; Ribbens, S.; de Witte, K.; Mertens, M.; Meynen, V.; Bals, S.; Van Tendeloo, G.; Vansant, E.F.; Cool, P.
	Title	Combined TiO₂/SiO₂ mesoporous photocatalysts with location and phase controllable TiO₂ nanoparticles			Type	A1 Journal article
	Year	2009	Publication	Applied catalysis : B : environmental	Abbreviated Journal	Appl Catal B-Environ
	Volume	88	Issue	3/4	Pages	515-524
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	Combined TiO2/SiO2 mesoporous materials were prepared by deposition of TiO2 nanoparticles synthesised via the acid-catalysed solgel method. In the first synthesis step a titania solution is prepared, by dissolving titaniumtetraisopropoxide in nitric acid. The influences of the initial titaniumtetraisopropoxide concentration and the temperature of dissolving on the final structural properties were investigated. In the second step of the synthesis, the titania nanoparticles were deposited on a silica support. Here, the influence of the temperature during deposition was studied. The depositions were carried out on two different mesoporous silica supports, SBA-15 and MCF, leading to substantial differences in the catalytic and structural properties. The samples were analysed with N2-sorption, X-ray diffraction (XRD), electron probe microanalysis (EPMA) and transmission electron microscopy (TEM) to obtain structural information, determining the amount of titania, the crystal phase and the location of the titania particles on the mesoporous material (inside or outside the mesoporous channels). The structural differences of the support strongly determine the location of the nanoparticles and the subsequent photocatalytic activity towards the degradation of rhodamine 6G in aqueous solution under UV irradiation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000266513400032	Publication Date	2008-10-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-3373;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.446	Times cited	69	Open Access
	Notes	Goa-Bof; Fwo			Approved	Most recent IF: 9.446; 2009 IF: 5.252
	Call Number	UA @ lucian @ c:irua:77150			Serial	403
Permanent link to this record



	Author	Cassiers, K.; Linssen, T.; Aerts, K.; Cool, P.; Lebedev, O.; Van Tendeloo, G.; van Grieken, R.; Vansant, E.F.
	Title	Controlled formation of amine-templated mesostructured zirconia with remarkably high thermal stability			Type	A1 Journal article
	Year	2003	Publication	Journal of materials chemistry	Abbreviated Journal	J Mater Chem
	Volume	13	Issue		Pages	3033-3039
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA); AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000186907500040	Publication Date	2003-11-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0959-9428;1364-5501;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	26	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:43522			Serial	502
Permanent link to this record



	Author	Herregods, S.J.F.; Mertens, M.; Van Havenbergh, K.; Van Tendeloo, G.; Cool, P.; Buekenhoudt, A.; Meynen, V.
	Title	Controlling pore size and uniformity of mesoporous titania by early stage low temperature stabilization			Type	A1 Journal article
	Year	2013	Publication	Journal of colloid and interface science	Abbreviated Journal	J Colloid Interf Sci
	Volume	391	Issue		Pages	36-44
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	The control of the formation process during and after self-assembly is of utmost importance to achieve well structured, controlled template-assisted mesoporous titania materials with the desired properties for various applications via the evaporation induced self-assembly method (EISA). The present paper reports on the large influence of the thermal stabilization and successive template removal on the pore structure of a mesostructured TiO2 material using the diblock copolymer Brij 58 as surfactant. A controlled thermal stabilization (temperature and duration) allows one to tailor the final pore size and uniformity much more precise by influencing the self-assembly of the template. Moreover, also the successive thermal template removal needs to be controlled in order to avoid a structural collapse. N2-sorption, TGA, TEM, FT-Raman spectroscopy, and small angle wide angle XRD have been used to follow the crystal growth and mesostructure organization after thermal stabilization and after thermal template removal, revealing its effect on the final pore structure.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000312039000006	Publication Date	2012-10-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-9797;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.233	Times cited	12	Open Access
	Notes				Approved	Most recent IF: 4.233; 2013 IF: 3.552
	Call Number	UA @ lucian @ c:irua:101757			Serial	506
Permanent link to this record



	Author	Meynen, V.; Cool, P.; Vansant, E.F.; Kortunov, P.; Grinberg, F.; Kärger, J.; Mertens, M.; Lebedev, O.I.; Van Tendeloo, G.
	Title	Deposition of vanadium silicalite-1 nanoparticles on SBA-15 materials: structural and transport characteristics of SBA-VS-15			Type	A1 Journal article
	Year	2007	Publication	Microporous and mesoporous materials	Abbreviated Journal	Micropor Mesopor Mat
	Volume	99	Issue	1/2	Pages	14-22
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000243845200003	Publication Date	2006-10-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1387-1811;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.615	Times cited	23	Open Access
	Notes	FWO; GOA; Inside-Pores NoE (FP-EU)			Approved	Most recent IF: 3.615; 2007 IF: 2.210
	Call Number	UA @ lucian @ c:irua:61567			Serial	647
Permanent link to this record



	Author	Ribbens, S.; Meynen, V.; Van Tendeloo, G.; Ke, X.; Mertens, M.; Maes, B.U.W.; Cool, P.; Vansant, E.F.
	Title	Development of photocatalytic efficient Ti-based nanotubes and nanoribbons by conventional and microwave assisted synthesis strategies			Type	A1 Journal article
	Year	2008	Publication	Microporous and mesoporous materials: zeolites, clays, carbons and related materials	Abbreviated Journal	Micropor Mesopor Mat
	Volume	114	Issue	1/3	Pages	401-409
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA); Organic synthesis (ORSY)
	Abstract	Titanate nanotubes were prepared via a hydrothermal treatment of TiO2 powders (Riedel De Haen) in a basic solution. Morphology and structure of the prepared samples were characterized by high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), XRD, FT-Raman spectroscopy, nitrogen sorption and DSC. The photocatalytic activity was evaluated by photocatalytic oxidation of rhodamine 6G. Trititanate nanotubes (TTNT) with inner pore diameters between 4 and 4.2 nm and surface areas up till 360 m(2)/g could be synthesized. The synthesis route was modified by introduction of a calcination step, by applying a lower hydrothermal temperature and microwave irradiation in order to increase the photocatalytic activity of the porous photoactive nanotubular materials. Calcination and a softer hydrothermal treatment led to the formation of anatase without affecting the surface area and nanotubular shape of the samples. In this way, the photocatalytic activity of the original trititanate nanotubes could be significantly increased. By making use of microwave assisted synthesis, the photocatalytic activity call also be increased due to the presence of anatase. However, by applying microwave synthesis, a different structure was obtained, nanoribbons (NR) instead of nanotubcs, resulting in a decrease in surface area and porosity.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000258432100040	Publication Date	2008-02-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1387-1811;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.615	Times cited	47	Open Access
	Notes	Fwo; Crp (Ua)			Approved	Most recent IF: 3.615; 2008 IF: 2.555
	Call Number	UA @ lucian @ c:irua:69696			Serial	683
Permanent link to this record



	Author	Lin, F.; Meng; Kukueva, E.; Altantzis, T.; Mertens, M.; Bals, S.; Cool, P.; Van Doorslaer, S.
	Title	Direct-synthesis method towards copper-containing periodic mesoporous organosilicas : detailed investigation of the copper distribution in the material			Type	A1 Journal article
	Year	2015	Publication	Journal of the Chemical Society : Dalton transactions	Abbreviated Journal	Dalton T
	Volume	44	Issue	44	Pages	9970-9979
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	Three-dimensional cubic Fm (3) over barm mesoporous copper-containing ethane-bridged PMO materials have been prepared through a direct-synthesis method at room temperature in the presence of cetyltrimethylammonium bromide as surfactant. The obtained materials have been unambiguously characterized in detail by several sophisticated techniques, including XRD, UV-Vis-Dr, TEM, elemental mapping, continuous- wave and pulsed EPR spectroscopy. The results show that at lower copper loading, the Cu2+ species are well dispersed in the Cu-PMO materials, and mainly exist as mononuclear Cu2+ species. At higher copper loading amount, Cu2+ clusters are observed in the materials, but the distribution of the Cu2+ species is still much better in the Cu-PMO materials prepared through the direct-synthesis method than in a Cu-containing PMO material prepared through an impregnation method. Moreover, the evolution of the copper incorporation during the PMO synthesis has been followed by EPR. The results show that the immobilization of the Cu2+ ion/complex and the formation of the PMO materials are taking place simultaneously. The copper ions are found to be situated on the inner surface of the mesopores of the materials and are accessible, which will be beneficial for the catalytic applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000355000700028	Publication Date	2015-04-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1477-9226;1477-9234;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.029	Times cited	11	Open Access	OpenAccess
	Notes	Goa-Bof; 335078 Colouratom; ECAS_Sara; (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:cannot);			Approved	Most recent IF: 4.029; 2015 IF: 4.197
	Call Number	c:irua:126422			Serial	725
Permanent link to this record



	Author	Asapu, R.; Claes, N.; Ciocarlan, R.-G.; Minjauw, M.; Detavernier, C.; Cool, P.; Bals, S.; Verbruggen, S.W.
	Title	Electron Transfer and Near-Field Mechanisms in Plasmonic Gold-Nanoparticle-Modified TiO₂Photocatalytic Systems			Type	A1 Journal article
	Year	2019	Publication	ACS applied nano materials	Abbreviated Journal	ACS Appl. Nano Mater.
	Volume	2	Issue	2	Pages	4067-4074
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The major mechanism responsible for plasmonic enhancement of titanium dioxide photocatalysis using gold nanoparticles is still under contention. This work introduces an experimental strategy to disentangle the significance of the charge transfer and near-field mechanisms in plasmonic photocatalysis. By controlling the thickness and conductive nature of a nanoparticle shell that acts as a spacer layer separating the plasmonic metal core from the TiO2 surface, field enhancement or charge transfer effects can be selectively repressed or evoked. Layer-by-layer and in situ polymerization methods are used to synthesize gold core–polymer shell nanoparticles with shell thickness control up to the sub-nanometer level. Detailed optical and electrical characterization supported by near-field simulation models corroborate the trends in photocatalytic activity of the different systems. This approach mainly points at an important contribution of the enhanced near field.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000477917700006	Publication Date	2019-05-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2574-0970	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	32	Open Access	OpenAccess
	Notes	This work was supported by Research Foundation Flanders (FWO). P.C. and R-G.C. acknowledge financial support from FWO (Project No. G038215N). N.C. and S.B. acknowledge financial support from the European Research Council (ERC Starting Grant No. 335078-COLOURATOM).			Approved	Most recent IF: NA
	Call Number	EMAT @ emat @UA @ admin @ c:irua:160579			Serial	5184
Permanent link to this record



	Author	Stevens, W.J.J.; Mertens, M.; Mullens, S.; Thijs, I.; Van Tendeloo, G.; Cool, P.; Vansant, E.F.
	Title	Formation mechanism of SBA-16 spheres and control of their dimensions			Type	A1 Journal article
	Year	2006	Publication	Microporous and mesoporous materials	Abbreviated Journal	Micropor Mesopor Mat
	Volume	93	Issue		Pages	119-124
	Keywords	A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000239252700014	Publication Date	2006-03-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1387-1811;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.615	Times cited	34	Open Access
	Notes				Approved	Most recent IF: 3.615; 2006 IF: 2.796
	Call Number	UA @ lucian @ c:irua:58822			Serial	1252
Permanent link to this record



	Author	van Oers, C.J.; Stevens, W.J.J.; Bruijn, E.; Mertens, M.; Lebedev, O.I.; Van Tendeloo, G.; Meynen, V.; Cool, P.
	Title	Formation of a combined micro- and mesoporous material using zeolite Beta nanoparticles			Type	A1 Journal article
	Year	2009	Publication	Microporous and mesoporous materials: zeolites, clays, carbons and related materials	Abbreviated Journal	Micropor Mesopor Mat
	Volume	120	Issue	1/2	Pages	29-34
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	Composite micro- and mesoporous materials are synthesized using zeolite Beta nanoparticles without the need for a structure directing agent to form the mesopores. This leads to important ecological and economical advantages. The influence of the way of cooling the aged nanoparticles solution on the formation of the composite materials has been studied. The materials have been characterized towards porosity by N2-sorption, towards zeolitic properties by TGA, DRIFT, XRD and TEM, towards aluminium content by EPMA. All prepared structures possess zeolitic properties. However, the method of cooling down of the aged seeds leads to differences in the porosity and intensity of the zeolitic characteristics.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000264619200006	Publication Date	2008-09-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1387-1811;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.615	Times cited	42	Open Access
	Notes	Crp; Sfr Ua			Approved	Most recent IF: 3.615; 2009 IF: 2.652
	Call Number	UA @ lucian @ c:irua:74950			Serial	1254
Permanent link to this record



	Author	Vernimmen, J.; Meynen, V.; Mertens, M.; Lebedev, O.I.; Van Tendeloo, G.; Cool, P.
	Title	Formation of a Ti-siliceous trimodal material with macroholes, mesopores and zeolitic features via a one-pot templating synthesis			Type	A1 Journal article
	Year	2012	Publication	Journal of porous materials	Abbreviated Journal	J Porous Mat
	Volume	19	Issue	2	Pages	153-160
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	Based on a facile one-pot templating synthesis, using a TS-1 zeolite recipe whereby part of the zeolite structure directing agent is replaced by a mesopore templating agent, a trimodal material is formed. The resulting meso-TSM material combines mesoporosity (Ti-MCM-41) with zeolitic features (TS-1) and a unique sheet-like morphology with uniform macroporous voids (macroholes). Moreover, the macrohole formation, mesoporosity and zeolitic properties of the meso-TSM material can be controlled in a straightforward way by adjusting the length of the hydrothermal treatment. This newly developed material may imply great potential for catalytic redox applications and diffusion limitated processes because of its highly tunable character in all three dimensions (micro-, meso- and macroporous scale).
	Address
	Corporate Author				Thesis
	Publisher	Kluwer Academic	Place of Publication	Boston, Mass.	Editor
	Language		Wos	000301187600002	Publication Date	2011-03-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1380-2224;1573-4854;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.624	Times cited	2	Open Access
	Notes	Fwo; Goa			Approved	Most recent IF: 1.624; 2012 IF: 1.348
	Call Number	UA @ lucian @ c:irua:88367			Serial	1257
Permanent link to this record



	Author	Uytdenhouwen, Y.; Hereijgers, J.; Breugelmans, T.; Cool, P.; Bogaerts, A.
	Title	How gas flow design can influence the performance of a DBD plasma reactor for dry reforming of methane			Type	A1 Journal article
	Year	2021	Publication	Chemical Engineering Journal	Abbreviated Journal	Chem Eng J
	Volume	405	Issue		Pages	126618
	Keywords	A1 Journal article; Engineering sciences. Technology; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT); Applied Electrochemistry & Catalysis (ELCAT)
	Abstract	DBD plasma reactors are commonly used in a static ‘one inlet – one outlet’ design that goes against reactor design principles for multi-component reactions, such as dry reforming of methane (DRM). Therefore, in this paper we have developed a novel reactor design, and investigated how the shape and size of the reaction zone, as well as gradual gas addition, and the method of mixing CO2 and CH4 can influence the conversion and product com position of DRM. Even in the standard ‘one inlet – one outlet’ design, the direction of the gas flow (i.e. short or long path through the reactor, which defines the gas velocity at fixed residence time), as well as the dimensions of the reaction zone and the power delivery to the reactor, largely affect the performance. Using gradual gas addition and separate plasma activation zones for the individual gases give increased conversions within the same operational parameters, by optimising mixing ratios and kinetics. The choice of the main (pre-activated) gas and the direction of gas flow largely affect the conversion and energy cost, while the gas inlet position during separate addition only influences the product distribution.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000626511800005	Publication Date	2020-08-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.216	Times cited		Open Access	OpenAccess
	Notes	Interreg; Flanders; FWO; University of Antwerp; The authors acknowledge financial support from the European Fund for Regional Development through the cross-border collaborative Interreg V program Flanders-the Netherlands (project EnOp), the Fund 13 for Scientific Research (FWO; grant number: G.0254.14N), and an IOFSBO (SynCO2Chem) project from the University of Antwerp.			Approved	Most recent IF: 6.216
	Call Number	PLASMANT @ plasmant @c:irua:170609			Serial	6410
Permanent link to this record



	Author	Uytdenhouwen, Y.; Bal, Km.; Michielsen, I.; Neyts, Ec.; Meynen, V.; Cool, P.; Bogaerts, A.
	Title	How process parameters and packing materials tune chemical equilibrium and kinetics in plasma-based CO2 conversion			Type	A1 Journal article
	Year	2019	Publication	Chemical engineering journal	Abbreviated Journal	Chem Eng J
	Volume	372	Issue		Pages	1253-1264
	Keywords	A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Plasma (catalysis) reactors are increasingly being used for gas-based chemical conversions, providing an alternative method of energy delivery to the molecules. In this work we explore whether classical concepts such as equilibrium constants, (overall) rate coefficients, and catalysis exist under plasma conditions. We specifically investigate the existence of a so-called partial chemical equilibrium (PCE), and how process parameters and packing properties influence this equilibrium, as well as the overall apparent rate coefficient, for CO2 splitting in a DBD plasma reactor. The results show that a PCE can be reached, and that the position of the equilibrium, in combination with the rate coefficient, greatly depends on the reactor parameters and operating conditions (i.e., power, pressure, and gap size). A higher power, higher pressure, or smaller gap size enhance both the equilibrium constant and the rate coefficient, although they cannot be independently tuned. Inserting a packing material (non-porous SiO2 and ZrO2 spheres) in the reactor reveals interesting gap/material effects, where the type of material dictates the position of the equilibrium and the rate (inhibition) independently. As a result, no apparent synergistic effect or plasma-catalytic behaviour was observed for the non-porous packing materials studied in this reaction. Within the investigated parameters, equilibrium conversions were obtained between 23 and 71%, while the rate coefficient varied between 0.027 s−1 and 0.17 s−1. This method of analysis can provide a more fundamental insight in the overall reaction kinetics of (catalytic) plasma-based gas conversion, in order to be able to distinguish plasma effects from true catalytic enhancement.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000471670400116	Publication Date	2019-05-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.216	Times cited	3	Open Access	Not_Open_Access: Available from 05.05.2021
	Notes	European Fund for Regional Development; FWOFWO, G.0254.14N ; University of Antwerp; FWO-FlandersFWO-Flanders, 11V8915N ; The authors acknowledge financial support from the European Fund for Regional Development through the cross-border collaborative Interreg V program Flanders-the Netherlands (project EnOp), the Fund for Scientific Research (FWO; Grant Number: G.0254.14N), a TOP-BOF project and an IOF-SBO (SynCO2Chem) project from the University of Antwerp. K. M. B. was funded as a PhD fellow (aspirant) of the FWOFlanders (Fund for Scientific Research-Flanders), Grant 11V8915N.			Approved	Most recent IF: 6.216
	Call Number	PLASMANT @ plasmant @UA @ admin @ c:irua:159979			Serial	5171
Permanent link to this record



	Author	Gupta, A.; Baron, G.V.; Perreault, P.; Lenaerts, S.; Ciocarlan, R.-G.; Cool, P.; Mileo, P.G.M.; Rogge, S.; Van Speybroeck, V.; Watson, G.; Van Der Voort, P.; Houlleberghs, M.; Breynaert, E.; Martens, J.; Denayer, J.F.M.
	Title	Hydrogen clathrates : next generation hydrogen storage materials			Type	A1 Journal article
	Year	2021	Publication	Energy Storage Materials	Abbreviated Journal
	Volume	41	Issue		Pages	69-107
	Keywords	A1 Journal article; Engineering sciences. Technology; Laboratory of adsorption and catalysis (LADCA); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Extensive research has been carried on the molecular adsorption in high surface area materials such as carbonaceous materials and MOFs as well as atomic bonded hydrogen in metals and alloys. Clathrates stand among the ones to be recently suggested for hydrogen storage. Although, the simulations predict lower capacity than the expected by the DOE norms, the additional benefits of clathrates such as low production and operational cost, fully reversible reaction, environmentally benign nature, low risk of flammability make them one of the most promising materials to be explored in the next decade. The inherent ability to tailor the properties of clathrates using techniques such as addition of promoter molecules, use of porous supports and formation of novel reverse micelles morphology provide immense scope customisation and growth. As rapidly evolving materials, clathrates promise to get as close as possible in the search of “holy grail” of hydrogen storage. This review aims to provide the audience with the background of the current developments in the solid-state hydrogen storage materials, with a special focus on the hydrogen clathrates. The in-depth analysis of the hydrogen clathrates will be provided beginning from their discovery, various additives utilised to enhance their thermodynamic and kinetic properties, challenges in the characterisation of hydrogen in clathrates, theoretical developments to justify the experimental findings and the upscaling opportunities presented by this system. The review will present state of the art in the field and also provide a global picture for the path forward.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000685118300009	Publication Date	2021-06-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2405-8297	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:178744			Serial	8045
Permanent link to this record



	Author	Özen, M.; Mertens, M.; Luyten, J.; Snijkers, F.; d' Hondt, H.; Cool, P.
	Title	Hydrothermal synthesis of carbonate-free submicron-sized barium titanate from an amorphous precursor : synthesis and characterization			Type	A1 Journal article
	Year	2012	Publication	Ceramics international	Abbreviated Journal	Ceram Int
	Volume	38	Issue	1	Pages	619-625
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	In this paper, the amorphous barium titanate precursor was prepared by the peroxo-hydroxide method and post-treated by various drying procedures, such as: room temperature drying, room temperature vacuum drying and vacuum drying at 50 degrees C. The objective in the latter two treatments was to increase the Ti-O-Ba bonds of the precursor. The post-treated precursors were compared with the untreated (i.e., 'wet') precursor. Also, a barium titanate precursor was prepared by an alkoxide route. Afterwards, the precursors were hydrothermally treated at 200 degrees C in a 10 M NaOH solution. Vacuum drying of the precursor seemingly promoted the formation of Ti-O-Ti bonds in the hydrothermal end-product. The low Ba:Ti ratio (0.66) of the alkoxide-route prepared precursor lead to a multi-phase hydrothermal product with BaTiO(3) as the main phase. In contrast, phase pure BaTiO(3), i.e. without BaCO(3) contamination, was obtained for the precursor which was dried at room temperature. Cube-shaped and highly crystalline BaTiO(3) particles were observed by electron microscopy for the hydrothermally treated peroxo-hydroxide-route prepared precursor. (C) 2011 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Barking	Editor
	Language		Wos	000298766900083	Publication Date	2011-08-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0272-8842;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.986	Times cited	14	Open Access
	Notes				Approved	Most recent IF: 2.986; 2012 IF: 1.789
	Call Number	UA @ lucian @ c:irua:96263			Serial	1541
Permanent link to this record



	Author	Vernimmen, J.; Guidotti, M.; Silvestre-Albero, J.; Jardim, E.O.; Mertens, M.; Lebedev, O.I.; Van Tendeloo, G.; Psaro, R.; Rodríguez-Reinoso, F.; Meynen, V.; Cool, P.
	Title	Immersion calorimetry as a tool to evaluate the catalytic performance of titanosilicate materials in the epoxidation of cyclohexene			Type	A1 Journal article
	Year	2011	Publication	Langmuir: the ACS journal of surfaces and colloids	Abbreviated Journal	Langmuir
	Volume	27	Issue	7	Pages	3618-3625
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	Different types of titanosilicates are synthesized, structurally characterized, and subsequently catalytically tested in the liquid-phase epoxidation of cyclohexene. The performance of three types of combined zeolitic/mesoporous materials is compared with that of widely studied Ti-grafted-MCM-41 molecular sieve and the TS-1 microporous titanosilicate. The catalytic test results are correlated with the structural characteristics of the different catalysts. Moreover, for the first time, immersion calorimetry with the same substrate molecule as in the catalytic test reaction is applied as an extra means to interpret the catalytic results. A good correlation between catalytic performance and immersion calorimetry results is found. This work points out that the combination of catalytic testing and immersion calorimetry can lead to important insights into the influence of the materials structural characteristics on catalysis. Moreover, the potential of using immersion calorimetry as a screening tool for catalysts in epoxidation reactions is shown.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000288970900054	Publication Date	2011-02-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0743-7463;1520-5827;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.833	Times cited	19	Open Access
	Notes				Approved	Most recent IF: 3.833; 2011 IF: 4.186
	Call Number	UA @ lucian @ c:irua:88366			Serial	1557
Permanent link to this record



	Author	de Witte, K.; Busuioc, A.M.; Meynen, V.; Mertens, M.; Bilba, N.; Van Tendeloo, G.; Cool, P.; Vansant, E.F.
	Title	Influence of the synthesis parameters of TiO₂-SBA-15 materials on the adsorption and photodegradation of rhodamine-6G			Type	A1 Journal article
	Year	2008	Publication	Microporous and mesoporous materials: zeolites, clays, carbons and related materials	Abbreviated Journal	Micropor Mesopor Mat
	Volume	110	Issue	1	Pages	100-110
	Keywords	A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000254056200013	Publication Date	2007-10-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1387-1811;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.615	Times cited	54	Open Access
	Notes				Approved	Most recent IF: 3.615; 2008 IF: 2.555
	Call Number	UA @ lucian @ c:irua:68280			Serial	1654
Permanent link to this record



	Author	Ahenach, J.; Cool, P.; Vansant, E.F.; Lebedev, O.; van Landuyt, J.
	Title	Influence of water on the pillaring of montmorillonite with aminopropyltriethoxysilane			Type	A1 Journal article
	Year	1999	Publication	Physical chemistry, chemical physics	Abbreviated Journal	Phys Chem Chem Phys
	Volume	1	Issue		Pages	3703-3708
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000081765300046	Publication Date	2002-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1463-9076;1463-9084;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.123	Times cited	10	Open Access
	Notes				Approved	Most recent IF: 4.123; 1999 IF: NA
	Call Number	UA @ lucian @ c:irua:28250			Serial	1660
Permanent link to this record



	Author	Stevens, W.J.J.; Lebeau, K.; Mertens, M.; Van Tendeloo, G.; Cool, P.; Vansant, E.F.
	Title	Investigation of the morphology of the mesoporous SBA-16 and SBA-15 materials			Type	A1 Journal article
	Year	2006	Publication	The journal of physical chemistry : B : condensed matter, materials, surfaces, interfaces and biophysical	Abbreviated Journal	J Phys Chem B
	Volume	110	Issue	18	Pages	9183-9187
	Keywords	A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000237451300042	Publication Date	2006-05-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1520-6106;1520-5207;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.177	Times cited	109	Open Access
	Notes				Approved	Most recent IF: 3.177; 2006 IF: 4.115
	Call Number	UA @ lucian @ c:irua:58264			Serial	1738
Permanent link to this record



	Author	Linssen, T.; Cool, P.; Baroudi, M.; Cassiers, K.; Vansant, E.F.; Lebedev, O.; van Landuyt, J.
	Title	Leached natural saponite as the silicate source in the synthesis of aluminosilicate hexagonal mesoporous materials			Type	A1 Journal article
	Year	2002	Publication	The journal of physical chemistry : B : condensed matter, materials, surfaces, interfaces and biophysical	Abbreviated Journal	J Phys Chem B
	Volume	106	Issue		Pages	4470-4476
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000175356900019	Publication Date	2002-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1520-6106;1520-5207;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.177	Times cited	23	Open Access
	Notes				Approved	Most recent IF: 3.177; 2002 IF: 3.611
	Call Number	UA @ lucian @ c:irua:46279			Serial	1811
Permanent link to this record



	Author	Kus, M.; Altantzis, T.; Vercauteren, S.; Caretti, I.; Leenaerts, O.; Batenburg, K.J.; Mertens, M.; Meynen, V.; Partoens, B.; Van Doorslaer, S.; Bals, S.; Cool, P.
	Title	Mechanistic Insight into the Photocatalytic Working of Fluorinated Anatase {001} Nanosheets			Type	A1 Journal article
	Year	2017	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	121	Issue	121	Pages	26275-26286
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	Anatase nanosheets with exposed {001} facets have gained increasing interest for photocatalytic applications. To fully understand the structure-to-activity relation, combined experimental and computational methods have been exploited. Anatase nanosheets were prepared under hydrothermal conditions in the presence of fluorine ions. High resolution scanning transmission electron microscopy was used to fully characterize the synthesized material, confirming the TiO2 nanosheet morphology. Moreover, the surface structure and composition of a single nanosheet could be determined by annular bright-field scanning transmission electron microscopy (ABF-STEM) and STEM electron energy loss spectroscopy (STEM-EELS). The photocatalytic activity was tested for the decomposition of organic dyes rhodamine 6G and methyl orange and compared to a reference TiO2 anatase sample. The anatase nanosheets with exposed {001} facets revealed a significantly lower photocatalytic activity compared to the reference. In order to understand the mechanism for the catalytic performance, and to investigate the role of the presence of F−, light-induced electron paramagnetic resonance (EPR) experiments were performed. The EPR results are in agreement with TEM, proving the presence of Ti3+ species close to the surface of the sample and allowing the analysis of the photoinduced formation of paramagnetic species. Further, ab initio calculations of the anisotropic effective mass of electrons and electron holes in anatase show a very high effective mass of electrons in the [001] direction, having a negative impact on the mobility of electrons toward the {001} surface and thus the photocatalysis. Finally, motivated by the experimental results that indicate the presence of fluorine atoms at the surface, we performed ab initio calculations to determine the position of the band edges in anatase slabs with different terminations of the {001} surface. The presence of fluorine atoms near the surface is shown to strongly shift down the band edges, which indicates another reason why it can be expected that the prepared samples with a large amount of {001} surface, but with fluorine atoms near the surface, show only a low photocatalytic activity.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000417228500017	Publication Date	2017-11-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	20	Open Access	OpenAccess
	Notes	The authors acknowledge the University of Antwerp for financial support in the frame of a GOA project. S.B. acknowledges funding from the European Research Council under the Seventh Framework Program (FP7), ERC Grant No. 335078 COLOURATOM. S.V.D. and V.M. acknowledge funding from the Fund for Scientific Research-Flanders (G.0687.13). T.A. acknowledges financial support from the Research Foundation Flanders (FWO, Belgium) through a postdoctoral grant. (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); saraecas; ECAS_Sara;			Approved	Most recent IF: 4.536
	Call Number	EMAT @ emat @c:irua:147240UA @ admin @ c:irua:147240			Serial	4771
Permanent link to this record



	Author	Stevens, W.J.J.; Meynen, V.; Bruijn, E.; Lebedev, O.I.; Van Tendeloo, G.; Cool, P.; Vansant, E.F.
	Title	Mesoporous material formed by acidic hydrothermal assembly of silicalite-1 precursor nanoparticles in the absence of meso-templates			Type	A1 Journal article
	Year	2008	Publication	Microporous and mesoporous materials: zeolites, clays, carbons and related materials	Abbreviated Journal	Micropor Mesopor Mat
	Volume	110	Issue	1	Pages	77-85
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000254056200010	Publication Date	2007-09-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1387-1811;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.615	Times cited	21	Open Access
	Notes	Fwo; Crp; Inside-Pores			Approved	Most recent IF: 3.615; 2008 IF: 2.555
	Call Number	UA @ lucian @ c:irua:68229			Serial	1998
Permanent link to this record



	Author	de Witte, K.; Meynen, V.; Mertens, M.; Lebedev, O.I.; Van Tendeloo, G.; Sepúlveda-Escribano, A.; Rodríguez-Reinoso, F.; Vansant, E.F.; Cool, P.
	Title	Multi-step loading of titania on mesoporous silica: influence of the morphology and the porosity on the catalytic degradation of aqueous pollutants and VOC's			Type	A1 Journal article
	Year	2008	Publication	Applied catalysis : B : environmental	Abbreviated Journal	Appl Catal B-Environ
	Volume	84	Issue	1/2	Pages	125-132
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	Titania nanoparticles have been deposited on inert porous silica supports with high specific surface area. These materials have potential applications in paint and textile industry as the titania particles selectively deposited on the inner surface of the silica supports act as a photocatalyst. The inert external surface is necessary to avoid photodegradation of the textile material or the paint components. The photocatalytic activity of the catalysts has been evaluated with two catalytic setups. One setup in aqueous phase, for the degradation of dyes such as rhodamine-6G, is commonly used. The second setup is a continuous flow gaseous phase setup which was used for the mineralization of ethanol as a representative volatile organic compound (VOC). The influence of the porosity and the morphology of the silica supports on the photocatalytic activity are discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000260728300017	Publication Date	2008-04-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-3373;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.446	Times cited	24	Open Access
	Notes	Iwt 30916; Fwo			Approved	Most recent IF: 9.446; 2008 IF: 4.853
	Call Number	UA @ lucian @ c:irua:68279			Serial	2213
Permanent link to this record



	Author	de Witte, K.; Cool, P.; de Witte, I.; Ruys, L.; Rao, J.; Van Tendeloo, G.; Vansant, E.F.
	Title	Multistep loading of titania nanoparticles in the mesopores of SBA-15 for enhanced photocatalytic activity			Type	A1 Journal article
	Year	2007	Publication	Journal of nanoscience and nanotechnology	Abbreviated Journal	J Nanosci Nanotechno
	Volume	7	Issue	7	Pages	2511-2515
	Keywords	A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000246347700042	Publication Date	2007-04-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1533-4880;0000-0000;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.483	Times cited	13	Open Access
	Notes				Approved	Most recent IF: 1.483; 2007 IF: 1.987
	Call Number	UA @ lucian @ c:irua:64773			Serial	2240
Permanent link to this record