NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	361–390 of 710 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 >>

List View

Citations

Details

	Records
	Author	Alloul, A.; Cerruti, M.; Adamczyk, D.; Weissbrodt, D.G.; Vlaeminck, S.E.
	Title	Operational strategies to selectively produce purple bacteria for microbial protein in raceway reactors			Type	A1 Journal article
	Year	2021	Publication	Environmental Science & Technology	Abbreviated Journal	Environ Sci Technol
	Volume	55	Issue	12	Pages	8278-8286
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Purple non-sulfur bacteria (PNSB) show potential for microbial protein production on wastewater as animal feed. They offer good selectivity (i.e., low microbial diversity and high abundance of one species) when grown anaerobically in the light. However, the cost of closed anaerobic photobioreactors is prohibitive for protein production. Although open raceway reactors are cheaper, their feasibility to selectively grow PNSB is thus far unexplored. This study developed operational strategies to boost PNSB abundance in the biomass of a raceway reactor fed with volatile fatty acids. For a flask reactor run at a 2 day sludge retention time (SRT), matching the chemical oxygen demand (COD) loading rate to the removal rate in the light period prevented substrate availability during the dark period and increased the PNSB abundance from 50-67 to 88-94%. A raceway reactor run at a 2 day SRT showed an increased PNSB abundance from 14 to 56% when oxygen supply was reduced (no stirring at night). The best performance was achieved at the highest surface-to-volume ratio (10 m(2) m(-3) increased light availability) showing productivities up to 0.2 g protein L-1 day(-1) and a PNSB abundance of 78%. This study pioneered in PNSB-based microbial protein production in raceway reactors, yielding high selectivity while avoiding the combined availability of oxygen, COD, and darkness.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000663939900051	Publication Date	2021-06-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-936x; 1520-5851	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.198	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 6.198
	Call Number	UA @ admin @ c:irua:179768			Serial	8334
Permanent link to this record



	Author	Van Tendeloo, M.; Bundervoet, B.; Carlier, N.; Van Beeck, W.; Mollen, H.; Lebeer, S.; Colsen, J.; Vlaeminck, S.E.
	Title	Piloting carbon-lean nitrogen removal for energy-autonomous sewage treatment			Type	A1 Journal article
	Year	2021	Publication	Environmental Science-Water Research & Technology	Abbreviated Journal	Environ Sci-Wat Res
	Volume	7	Issue	12	Pages	2268-2281
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Energy-autonomous sewage treatment can be achieved if nitrogen (N) removal does not rely on organic carbon (∼chemical oxygen demand, COD), so that a maximum of the COD can be redirected to energy recovery. Shortcut N removal technologies such as partial nitritation/anammox and nitritation/denitritation are therefore essential, enabling carbon- and energy-lean nitrogen removal. In this study, a novel three-reactor pilot design was tested and consisted of a denitrification, an intermittent aeration, and an anammox tank. A vibrating sieve was added for differential sludge retention time (SRT) control. The 13 m3 pilot was operated on pre-treated sewage (A-stage effluent) at 12–24 °C. Selective suppression of unwanted nitrite-oxidizing bacteria over aerobic ammonium-oxidizing bacteria was achieved with strict floccular SRT management combined with innovative aeration control, resulting in a minimal nitrate production ratio of 17 ± 10%. Additionally, anoxic ammonium-oxidizing bacteria (AnAOB) activity could be maintained in the reactor for at least 150 days because of long granular SRT management and the anammox tank. Consequently, the COD/N removal ratio of 2.3 ± 0.7 demonstrated shortcut N removal almost three times lower than the currently applied nitrification/denitrification technology. The effluent total N concentrations of 17 ± 3 mg TN per L (at 21 ± 1 °C) and 17 ± 6 mg TN per L (at 15 ± 1 °C) were however too high for application at the sewage treatment plant Nieuwveer (Breda, The Netherlands). Corresponding N removal efficiencies were 52 ± 12% and 37 ± 21%, respectively. Further development should focus on redirecting more nitrite to AnAOB in the B-stage, exploring effluent-polishing options, or cycling nitrate for increased A-stage denitrification.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000714159900001	Publication Date	2021-10-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2053-1400	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	2.817	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 2.817
	Call Number	UA @ admin @ c:irua:183347			Serial	8383
Permanent link to this record



	Author	Schalm, O.; Crabbé, A.; Storme, P.; Wiesinger, R.; Gambirasi, A.; Grieten, E.; Tack, P.; Bauters, S.; Kleber, C.; Favaro, M.; Schryvers, D.; Vincze, L.; Terryn, H.; Patelli, A.
	Title	The corrosion process of sterling silver exposed to a Na2S solution: monitoring and characterizing the complex surface evolution using a multi-analytical approach			Type	A1 Journal article
	Year	2016	Publication	Applied Physics A-Materials Science & Processing	Abbreviated Journal	Appl Phys A-Mater
	Volume	122	Issue	122	Pages	903
	Keywords	A1 Journal article; Electron Microscopy for Materials Science (EMAT);
	Abstract	Many historical ‘silver’ objects are composed of sterling silver, a silver alloy containing small amounts of copper. Besides the dramatic impact of copper on the corrosion process, the chemical composition of the corrosion layer evolves continuously. The evolution of the surface during the exposure to a Na2S solution was monitored by means of visual observation at macroscopic level, chemical analysis at microscopic level and analysis at the nanoscopic level. The corrosion process starts with the preferential oxidation of copper, forming mixtures of oxides and sulphides while voids are being created beneath the corrosion layer. Only at a later stage, the silver below the corrosion layer is consumed. This results in the formation of jalpaite and at a later stage of acanthite. The acanthite is found inside the corrosion layer at the boundaries of jalpaite grains and as individual grains between the jalpaite grains but also as a thin film on top of the corrosion layer. The corrosion process could be described as a sequence of 5 subsequent surface states with transitions between these states.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000384753800033	Publication Date	2016-09-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0947-8396	ISBN		Additional Links
	Impact Factor	1.455	Times cited	9	Open Access
	Notes	The authors are grateful for the financial support by the EU-FP7 Grant PANNA No. 282998 and for the opportunity to perform SR-XPS measurements at the NanoESCA beamline of the Elettra storage ring, under the approval of the advisory Committee (Proposal No. 20135164), as well as the opportunity to perform XANES measurements at the DUBBLE beamline of the ESRF storage ring (Proposal No. 26-01-990). The authors are grateful for the financial support by the STIMPRO Project FFB150215 of the University of Antwerp. Pieter Tack is funded by a Ph.D. Grant of the Agency for Innovation by Science and Technology (IWT). We would also like to thank Peter Van den Haute for the XRD measurements that were performed at the University of Ghent.			Approved	Most recent IF: 1.455
	Call Number	EMAT @ emat @			Serial	4331
Permanent link to this record



	Author	Zhao, L.; Ding, L.; Soete, J.; Idrissi, H.; Kerckhofs, G.; Simar, A.
	Title	Fostering crack deviation via local internal stresses in Al/NiTi composites and its correlation with fracture toughness			Type	A1 Journal article
	Year	2019	Publication	Composites: part A: applied science and manufacturing	Abbreviated Journal	Compos Part A-Appl S
	Volume	126	Issue	126	Pages	105617
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	In the framework of metal matrix composites, a research gap exists regarding tailoring damage mechanisms. The present work aims at developing an Al/NiTi composite incorporating internal stresses in the vicinity of reinforcements. The composite is manufactured by friction stir processing which allows a homogenous NiTi distribution and a good Al/NiTi interface bonding. The internal stresses are introduced via shape memory effect of the embedded NiTi particles. The induced internal strain field is confirmed by digital image correlation and the corresponding stress field is evaluated by finite element simulation. It is found that the damage mechanism is modified in the presence of internal stresses. The consequent enhancement of fracture toughness arises by the fact that the internal stresses foster discrete damages shifted from the fracture ligament line. These damages release the stress concentration at the main crack tip and lead to a deviated crack path when coalescing to accommodate fracture propagation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000489350600025	Publication Date	2019-09-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-835x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.075	Times cited		Open Access
	Notes	; This research work has been exclusively supported by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no 716678). The X-ray computed,tomography facilities of the Department of Materials Engineering of the KU Leuven are financed by the Hercules Foundation. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). The authors acknowledge Professor F. Delannay from UCLouvain for fruitful discussions. ;			Approved	Most recent IF: 4.075
	Call Number	UA @ admin @ c:irua:163706			Serial	5387
Permanent link to this record



	Author	Aichele, T.; Robin, I.-C.; Bougerol, C.; André, R.; Tatarenko, S.; Van Tendeloo, G.
	Title	CdSe quantum dot formation induced by amorphous Se			Type	A1 Journal article
	Year	2007	Publication	Surface science : a journal devoted to the physics and chemistry of interfaces T2 – International Conference on NANO-Structures Self Assembling, JUL 02-06, 2006, Aix en Provence, FRANCE	Abbreviated Journal	Surf Sci
	Volume	601	Issue	13	Pages	2664-2666
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The mechanism allowing the transition from a two-dimensional strained layer of CdSe on ZnSe to self-assembled islands induced by the use of amorphous selenium is still not fully understood. For a better understanding, atomic force microscopy and transmission electron microscopy studies were performed on CdSe films with a thickness close to that for quantum dot formation. Below this thickness, the sample surface results in undulations along the [110] crystal direction, while few quantum dots are situated in the wave valleys. Plan view transmission electron microscopy studies reveal a strong anisotropy of the islands and show that the Se desorption conditions are crucial. (C) 2006 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000248030100027	Publication Date	2006-12-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0039-6028;	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	2.062	Times cited		Open Access
	Notes				Approved	Most recent IF: 2.062; 2007 IF: 1.855
	Call Number	UA @ lucian @ c:irua:102668			Serial	304
Permanent link to this record



	Author	Tuck, L.; Sayer, M.; Mackenzie, M.; Hadermann, J.; Dunfield, D.; Pietak, A.; Reid, J.W.; Stratilatov, A.D.
	Title	Composition and crystal structure of resorbable calcium phosphate thin films			Type	A1 Journal article
	Year	2006	Publication	Journal of materials science	Abbreviated Journal	J Mater Sci
	Volume	41	Issue	13	Pages	4273-4284
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000239282300041	Publication Date	2006-05-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-2461;1573-4803;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.599	Times cited	2	Open Access
	Notes				Approved	Most recent IF: 2.599; 2006 IF: 0.999
	Call Number	UA @ lucian @ c:irua:60128			Serial	442
Permanent link to this record



	Author	Bittencourt, C.; Felten, A.; Douhard, B.; Colomer, J.-F.; Van Tendeloo, G.; Drube, W.; Ghijsen, J.; Pireaux, J.-J.
	Title	Metallic nanoparticles on plasma treated carbon nanotubes : $Nano²hybrids$			Type	A1 Journal article
	Year	2007	Publication	Surface science : a journal devoted to the physics and chemistry of interfaces T2 – International Conference on NANO-Structures Self Assembling, JUL 02-06, 2006, Aix en Provence, FRANCE	Abbreviated Journal	Surf Sci
	Volume	601	Issue	13	Pages	2800-2804
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Multi-wall carbon nanotubes (MWCNTs) were decorated with metal clusters by thermal evaporation. Transmission electron microscopy (TEM) shows that the nature and extent of metal coverage can be varied by plasma treating the MWCNT surface. The metal clusters on oxygen plasma treated arc-discharge MWCNTs have a more dense distribution than the clusters evaporated on as-synthesized are-discharge MWCNTs. In contrast, the plasma treatment did not affect the cluster distribution on CVD MWCNTs. Analyses of the valence band and the core levels by X-ray photoelectron spectroscopy suggest poor charge transfer between gold clusters and MWCNTs; on the contrary suggest good charge transfer between Ni clusters and MWCNTs. (c) 2007 Elsevier B. V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000248030100055	Publication Date	2006-12-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0039-6028;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.062	Times cited	44	Open Access
	Notes	Pai-V 1			Approved	Most recent IF: 2.062; 2007 IF: 1.855
	Call Number	UA @ lucian @ c:irua:102663			Serial	2011
Permanent link to this record



	Author	Vast, L.; Carpentier, L.; Lallemand, F.; Colomer, J.-F.; Van Tendeloo, G.; Fonseca, A.; Nagy, J.B.; Mekhalif, Z.; Delhalle, J.
	Title	Multiwalled carbon nanotubes functionalized with 7-octenyltrichlorosilane and n-octyltrichlorosilane: dispersion in Sylgard®184 silicone and Youngs modulus			Type	A1 Journal article
	Year	2009	Publication	Journal of materials science	Abbreviated Journal	J Mater Sci
	Volume	44	Issue	13	Pages	3476-3482
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Sylgard®184/multiwalled carbon nanotube (MWNT) composites have been prepared by in situ polymerization using purified and functionalized multiwalled carbon nanotubes (f-MWNTs) as fillers. Surface modification of the MWNTs has been carried out by silanization with 7-octenyltrichlorosilane (7OTCS) and n-octyltrichlorosilane (nOTCS). The modification and dispersion of the carbon nanotubes in composites were characterized by X-ray photoelectron spectroscopy (XPS), transmission electron spectroscopy (TEM), and high-resolution transmission electron spectroscopy (HRTEM). Youngs modulus results were derived from indentation testing. It is shown that the terminal-vinyl group of 7OTCS molecules plays an essential role for both the dispersion of the f-MWNTs in the composite and its mechanical properties. At loading as low as 0.2 wt%, the Youngs modulus is shown to increase up to 50%. This is interpreted as resulting from a combination of the good compatibility in the forming silicone matrix of the MWNTs coated with a siloxane network, on the one hand, and the covalent links created between the terminal-vinyl groups and the host matrix in formation, on the other hand.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000267153200022	Publication Date	2009-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-2461;1573-4803;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.599	Times cited	16	Open Access
	Notes	Iuap			Approved	Most recent IF: 2.599; 2009 IF: 1.471
	Call Number	UA @ lucian @ c:irua:77844			Serial	2245
Permanent link to this record



	Author	Adhami Sayad Mahaleh, M.; Narimisa, M.; Nikiforov, A.; Gromov, M.; Gorbanev, Y.; Bitar, R.; Morent, R.; De Geyter, N.
	Title	Nitrogen Oxidation in a Multi-Pin Plasma System in the Presence and Absence of a Plasma/Liquid Interface			Type	A1 Journal Article
	Year	2023	Publication	Applied Sciences	Abbreviated Journal	Applied Sciences
	Volume	13	Issue	13	Pages	7619
	Keywords	A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ;
	Abstract	The recent energy crisis revealed that there is a strong need to replace hydrocarbon-fueled industrial nitrogen fixation processes by alternative, more sustainable methods. In light of this, plasma-based nitrogen fixation remains one of the most promising options, considering both theoretical and experimental aspects. Lately, plasma interacting with water has received considerable attention in nitrogen fixation applications as it can trigger a unique gas- and liquid-phase chemistry. Within this context, a critical exploration of plasma-assisted nitrogen fixation with or without water presence is of great interest with an emphasis on energy costs, particularly in plasma reactors which have potential for large-scale industrial application. In this work, the presence of water in a multi-pin plasma system on nitrogen oxidation is experimentally investigated by comparing two pulsed negative DC voltage plasmas in metal–metal and metal–liquid electrode configurations. The plasma setups are designed to create similar plasma properties, including plasma power and discharge regime in both configurations. The system energy cost is calculated, considering nitrogen-containing species generated in gas and liquid phases as measured by a gas analyzer, nitrate sensor, and a colorimetry method. The energy cost profile as a function of specific energy input showed a strong dependency on the plasma operational frequency and the gas flow rate, as a result of different plasma operation regimes and initiated reverse processes. More importantly, the presence of the plasma/liquid interface increased the energy cost up to 14 ± 8%. Overall, the results showed that the presence of water in the reaction zone has a negative impact on the nitrogen fixation process.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001031217300001	Publication Date	2023-06-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2076-3417	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.7	Times cited		Open Access	Not_Open_Access
	Notes	NITROPLASM FWO-FNRS Excellence of Science, 30505023 ; European Union-NextGenerationEU, G0G2322N ;			Approved	Most recent IF: 2.7; 2023 IF: 1.679
	Call Number	PLASMANT @ plasmant @c:irua:198153			Serial	8802
Permanent link to this record



	Author	Pilehvar, S.; Gielkens, K.; Trashin, S.A.; Dardenne, F.; Blust, R.; De Wael, K.
	Title	(Electro)sensing of phenicol antibiotics : a review			Type	A1 Journal article
	Year	2016	Publication	Critical reviews in food science and nutrition	Abbreviated Journal	Crit Rev Food Sci
	Volume	56	Issue	14	Pages	2416-2429
	Keywords	A1 Journal article; Pharmacology. Therapy; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	The presence of residues from frequent antibiotic use in animal feed can cause serious health risks by contaminating products for human consumption such as meat and milk. The present article gives an overview of the electrochemical methods developed for the detection of phenicol antibiotic residues (chloramphenicol, thiamphenicol, and florfenicol) in different kinds of foodstuffs. Electrochemical sensors based on different biomolecules and nanomaterials are described. The detection limit of various developed methods with their advantages and disadvantage will be highlighted.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000382757200015	Publication Date	2015-04-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1040-8398	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.077	Times cited	13	Open Access
	Notes	; The authors are highly thankful for the University of Antwerp Grants (DOCPRO/ IWS). ;			Approved	Most recent IF: 6.077
	Call Number	UA @ admin @ c:irua:125663			Serial	5585
Permanent link to this record



	Author	Decostere, B.; Coppens, J.; Vervaeren, H.; Vlaeminck, S.E.; De Gelder, L.; Boon, N.; Nopens, I.; Van Hulle, S.W.H.
	Title	Kinetic exploration of intracellular nitrate storage in marine microalgae			Type	A1 Journal article
	Year	2017	Publication	Journal of environmental science and health : part A: toxic/hazardous substances and environmental engineering	Abbreviated Journal
	Volume	52	Issue	14	Pages	1303-1311
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	In this study, a recently developed model accounting for intracellular nitrate storage kinetics was thoroughly studied to understand and compare the storage capacity of Phaeodactylum tricornutum and Amphora coffeaeformis. In the first stage the identifiability of the biokinetic parameters was examined. Next, the kinetic model was calibrated for both microalgal species based on experimental observations during batch growth experiments. Two kinetic parameters were calibrated, namely the maximum specific growth rate (mu(max)) and the nitrate storage rate (k(sto)). A significant difference was observed for the nitrate storage rate between both species. For P. tricornutum, the nitrate storage rate was much higher (k(sto) = 0.036m(3) g(-1) DW d(-1)) compared to A. coffeaeformis (k(sto) = 0.0004m(3) g(-1) DW d(-1)). This suggests that P. tricornutum has a more efficient nitrate uptake ability and intracellular nitrate storage capacity and also indicates the need for determination of k(sto) in order to quantify nitrate storage.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000415634300004	Publication Date	2017-09-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1093-4529; 1532-4117	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:147467			Serial	8137
Permanent link to this record



	Author	Gonzalez-Garcia, A.; Lopez-Perez, W.; Rivera-Julio, J.; Peeters, F.M.; Mendoza-Estrada, V.; Gonzalez-Hernandez, R.
	Title	Structural, mechanical and electronic properties of two-dimensional structure of III-arsenide (111) binary compounds: An ab-initio study			Type	A1 Journal article
	Year	2018	Publication	Computational materials science	Abbreviated Journal	Comp Mater Sci
	Volume	144	Issue	144	Pages	285-293
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Structural, mechanical and electronic properties of two-dimensional single-layer hexagonal structures in the (111) crystal plane of IIIAs-ZnS systems (III = B, Ga and In) are studied by first-principles calculations based on density functional theory (DFT). Elastic and phonon dispersion relation display that 2D h-IIIAs systems (III = B, Ga and In) are both mechanical and dynamically stable. Electronic structures analysis show that the semiconducting nature of the 3D-IIIAs compounds is retained by their 2D single layer counterpart. Furthermore, density of states reveals the influence of sigma and pi bonding in the most stable geometry (planar or buckled) for 2D h-IIIAs systems. Calculations of elastic constants show that the Young's modulus, bulk modulus and shear modulus decrease for 2D h-IIIAs binary compounds as we move down on the group of elements of the periodic table. In addition, as the bond length between the neighboring cation-anion atoms increases, the 2D h-IIIAs binary compounds display less stiffness and more plasticity. Our findings can be used to understand the contribution of the r and p bonding in the most stable geometry (planar or buckled) for 2D h-IIIAs systems. Structural and electronic properties of h-IIIAs systems as a function of the number of layers have been also studied. It is shown that h-BAs keeps its planar geometry while both h-GAs and h-InAs retained their buckled ones obtained by their single layers. Bilayer h-IIIAs present the same bandgap nature of their counterpart in 3D. As the number of layers increase from 2 to 4, the bandgap width for layered h-IIIAs decreases until they become semimetal or metal. Interestingly, these results are different to those found for layered h-GaN. The results presented in this study for single and few-layer h-IIIAs structures could give some physical insights for further theoretical and experimental studies of 2D h-IIIV-like systems. (C) 2017 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000424902300036	Publication Date	2017-12-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0927-0256	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.292	Times cited	3	Open Access
	Notes	; This work has been carried out by the financial support of Universidad del Norte and Colciencias (Administrative Department of Science, Technology and Research of Colombia) under Convocatoria 712 – Convocatoria para proyectos de investigacion en Ciencias Basicas, ano 2015, Cod: 121571250192, Contrato 110-216. ;			Approved	Most recent IF: 2.292
	Call Number	UA @ lucian @ c:irua:149897UA @ admin @ c:irua:149897			Serial	4949
Permanent link to this record



	Author	Seuntjens, D.; Van Tendeloo, M.; Chatzigiannidou, I.; Carvajal-Arroyo, J.M.; Vandendriessche, S.; Vlaeminck, S.E.; Boon, N.
	Title	Synergistic exposure of return-sludge to anaerobic starvation, sulfide and free ammonia to suppress nitrite oxidizing bacteria			Type	A1 Journal article
	Year	2018	Publication	Environmental science and technology	Abbreviated Journal
	Volume	52	Issue	15	Pages	8725-8732
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	A key step toward energy-positive sewage treatment is the development of mainstream partial nitritation/anammox, a nitrogen removal technology where aerobic ammonium-oxidizing bacteria (AerAOB) are desired, while nitrite-oxidizing bacteria (NOB) are not. To suppress NOB, a novel return-sludge treatment was investigated. Single and combined effects of sulfide (0-600 mg S L-1), anaerobic starvation (0-8 days), and a free ammonia (FA) shock (30 mg FA-N L-1 for 1 h) were tested for immediate effects and long-term recovery. AerAOB and NOB were inhibited immediately and proportionally by sulfide, with AerAOB better coping with the inhibition, while the short FA shock and anaerobic starvation had minor effects. Combinatory effects inhibited AerAOB and NOB more strongly. A combined treatment of sulfide (150 mg S L-1), 2 days of anaerobic starvation, and FA shock (30 mg FA-N L-1) inhibited AerAOB 14% more strongly compared to sulfide addition alone, while the AerAOB/NOB activity ratio remained constant. Despite no positive change being observed in the immediate-stress response, AerAOB recovered much faster than NOB, with a nitrite accumulation ratio (effluent nitrite on nitrite + nitrate) peak of 50% after 12 days. Studying long-term recovery is therefore crucial for design of an optimal NOB-suppression treatment, while applying combined stressors regularly may lead toward practical implementation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000441477600073	Publication Date	2018-05-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-936x; 1520-5851	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:152909			Serial	8635
Permanent link to this record



	Author	Grubova, I.Y.; Surmeneva, M.A.; Huygh, S.; Surmenev, R.A.; Neyts, E.C.
	Title	Effects of silicon doping on strengthening adhesion at the interface of the hydroxyapatite-titanium biocomposite : a first-principles study			Type	A1 Journal article
	Year	2019	Publication	Computational materials science	Abbreviated Journal	Comp Mater Sci
	Volume	159	Issue	159	Pages	228-234
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper we employ first-principles calculations to investigate the effect of substitutional Si doping in the amorphous calcium-phosphate (a-HAP) structure on the work of adhesion, integral charge transfer, charge density difference and theoretical tensile strengths between an a-HAP coating and amorphous titanium dioxide (a-TiO2) substrate systemically. Our calculations demonstrate that substitution of a P atom by a Si atom in a-HAP (a-Si-HAP) with the creation of OH-vacancies as charge compensation results in a significant increase of the bonding strength of the coating to the substrate. The work of adhesion of the optimized Si-doped interfaces reaches a value of up to -2.52 J m(-2), which is significantly higher than for the stoichiometric a-HAP/a-TiO2. Charge density difference analysis indicates that the dominant interactions at the interface have significant covalent character, and in particular two Ti-O and three Ca-O bonds are formed for a-Si-HAP/a-TiO2 and one Ti-O and three Ca-O bonds for a-HAP/a-TiO2. From the stress-strain curve, the Young's modulus of a-Si-HAP/a-TiO2 is calculated to be about 25% higher than that of the a-HAP/a-TiO2, and the yielding stress is about 2 times greater than that of the undoped model. Our calculations therefore demonstrate that the presence of Si in the a-HAP structure strongly alters not only the bioactivity and resorption rates, but also the mechanical properties of the a-HAP/a-TiO2 interface. The results presented here provide an important theoretical insight into the nature of the chemical bonding at the a-HAP/a-TiO2 interface, and are particularly significant for the practical medical applications of HAP-based biomaterials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000457856900023	Publication Date	2018-12-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0927-0256	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.292	Times cited	1	Open Access	Not_Open_Access
	Notes				Approved	Most recent IF: 2.292
	Call Number	UA @ admin @ c:irua:157480			Serial	5272
Permanent link to this record



	Author	Jehanathan, N.; Georgieva, V.; Saraiva, M.; Depla, D.; Bogaerts, A.; Van Tendeloo, G.
	Title	The influence of Cr and Y on the micro structural evolution of Mg―Cr―O and Mg―Y―O thin films			Type	A1 Journal article
	Year	2011	Publication	Thin solid films : an international journal on the science and technology of thin and thick films	Abbreviated Journal	Thin Solid Films
	Volume	519	Issue	16	Pages	5388-5396
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT); Electron microscopy for materials research (EMAT)
	Abstract	The compositional influence of Cr and Y on the microstructure of Mg―Cr―O, and Mg―Y―O films synthesized by reactive magnetron sputtering has been investigated by transmission electron microscopy, X-ray diffraction and molecular dynamics simulations. A decrease in crystallinity is observed in these films as the M (Cr or Y) content is increased. It is found that M forms a solid solution with MgO for metal ratios up to ~ 70% and ~ 50% for Cr and Y respectively. Above ~ 70% Cr metal ratio the Mg―Cr―O films are found to be completely amorphous. The Mg―Y―O films are composed of Mg(Y)O and Y2O3 nano crystallites, up to ~ 50% Y metal ratio. Above this ratio, only Y2O3 nano crystallites are found. The preferential < 111> MgO grain alignment is strongly affected by the increase in M content. For M metal ratios up to ~ 50%, there is a selective promotion of the < 100> MgO grain alignments and a decline in the < 111> grain alignments.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000292573500013	Publication Date	2011-02-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0040-6090;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.879	Times cited	4	Open Access
	Notes	Iwt			Approved	Most recent IF: 1.879; 2011 IF: 1.890
	Call Number	UA @ lucian @ c:irua:89516			Serial	1618
Permanent link to this record



	Author	Terzano, R.; Spagnuolo, M.; Medici, L.; Vekemans, B.; Vincze, L.; Janssens, K.; Ruggiero, P.
	Title	Copper stabilization by zeolite synthesis in polluted soils treated with coal fly ash			Type	A1 Journal article
	Year	2005	Publication	Environmental science and technology	Abbreviated Journal	Environ Sci Technol
	Volume	39	Issue	16	Pages	6280-6287
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	This study deals with the process of zeolite formation in an agricultural soil artificially polluted by high amounts of Cu (15 mg of Cu/g of soil dry weight) and treated with fused coal fly ash at 30 and 60 degrees C and how this process affects the mobility and availability of the metal. As a consequence of the treatment, the amount of dissolved Cu, and thus its mobility, was strongly reduced, and the percentage of the metal stabilized in the solid phase increased over time, reaching values of 30% at 30 degrees C and 40% at 60 degrees C. The physicochemical phenomena responsible for Cu stabilization in the solid phase have been evaluated by EDTA sequential extractions and synchrotron radiation based X-ray microanalytical techniques. These techniques were used for the visualization of the spatial distribution and the speciation of Cu in and/or on the neo-formed zeolite particles. In particular, micro XRF (X-ray fluorescence) tomography showed direct evidence that Cu can be entrapped as clusters inside the porous zeolitic structures while,mu-XANES (X-ray absorption near edge structure) spectroscopy determinations revealed Cu to be present mainly as Cu(II) hydroxide and Cu(II) oxide. The reported results could be useful as a basic knowledge for planning new technologies for the on site physicochemical stabilization of heavy metals in heavily polluted soils.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000231203100053	Publication Date	2005-08-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-936x; 1520-5851	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.198	Times cited	39	Open Access
	Notes				Approved	Most recent IF: 6.198; 2005 IF: 4.054
	Call Number	UA @ admin @ c:irua:103658			Serial	5560
Permanent link to this record



	Author	Tirry, W.; Coghe, F.; Bouvier, S.; Gasperini, M.; Rabet, L.; Schryvers, D.
	Title	A multi-scale characterization of deformation twins in Ti6Al4V sheet material deformed by simple shear			Type	A1 Journal article
	Year	2010	Publication	Materials science and engineering: part A: structural materials: properties, microstructure and processing	Abbreviated Journal	Mat Sci Eng A-Struct
	Volume	527	Issue	16/17	Pages	4136-4145
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Ti6Al4V sheet material is subjected to simple shear deformation with strain ratio's of 10%, 30% and 50%. Optical microscopy, transmission electron microscopy and electron backscatter diffraction techniques are applied to study the presence and morphology of deformation twins. Only the View the MathML source type of twins seems to be present with a volume fraction below 1%. These View the MathML source twins show a high density of basal stacking faults of the ABABACAC type identified using atomic resolution transmission electron microscopy. A resolved shear stress analysis shows that twins most often occur on those planes with the highest resolved shear stresses, but that the starting texture is not beneficial for the occurrence of twins. It is further suggested that a transitory strain hardening regime observed around 530 MPa might be related with the onset of twinning.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000278766800068	Publication Date	2010-03-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-5093;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.094	Times cited	20	Open Access
	Notes	Iap			Approved	Most recent IF: 3.094; 2010 IF: 2.101
	Call Number	UA @ lucian @ c:irua:82291			Serial	2212
Permanent link to this record



	Author	Meerburg, F.A.; Boon, N.; Van Winckel, T.; Pauwels, K.T.G.; Vlaeminck, S.E.
	Title	Live Fast, Die Young: Optimizing Retention Times in High-Rate Contact Stabilization for Maximal Recovery of Organics from Wastewater			Type	A1 Journal article
	Year	2016	Publication	Environmental science and technology	Abbreviated Journal
	Volume	50	Issue	17	Pages	9781-9790
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Wastewater is typically treated by the conventional activated sludge process, which suffers from an inefficient overall energy balance. The high-rate contact stabilization (HiCS) has been proposed as a promising primary treatment technology with which to maximize redirection of organics to sludge for subsequent energy recovery. It utilizes a feast famine cycle to select for bioflocculation, intracellular storage, or both. We optimized the HiCS process for organics recovery and characterized different biological pathways of organics removal and recovery. A total of eight HiCS reactors were operated at 15 degrees C at short solids retention times (SRT; 0.24-2.8 days), hydraulic contact times (t(c); 8 and 15 min), and stabilization times (t(s); 15 and 40 min). At an optimal SRT between 0.5 and 1.3 days and t(c) of 15 min and t(s) of 40 min, the HiCS system oxidized only 10% of influent chemical oxygen demand (COD) and recovered up to 55% of incoming organic matter into sludge. Storage played a minor role in the overall COD removal, which was likely dominated by aerobic biomass growth, bioflocculation onto extracellular polymeric substances, and settling. The HiCS process recovers enough organics to potentially produce 28 kWh of electricity per population equivalent per year by anaerobic digestion and electricity generation. This inspires new possibilities for energy-neutral wastewater treatment.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000382805800097	Publication Date	2016-08-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-936x; 1520-5851	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:138270			Serial	8176
Permanent link to this record



	Author	van Walsem, J.; Roegiers, J.; Modde, B.; Lenaerts, S.; Denys, S.
	Title	Integration of a photocatalytic multi-tube reactor for indoor air purification in HVAC systems : a feasibility study			Type	A1 Journal article
	Year	2018	Publication	Environmental Science and Pollution Research	Abbreviated Journal	Environ Sci Pollut R
	Volume	25	Issue	18	Pages	18015-18026
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	This work is focused on an in-depth experimental characterization of multi-tube reactors for indoor air purification integrated in ventilation systems. Glass tubes were selected as an excellent photocatalyst substrate to meet the challenging requirements of the operating conditions in a ventilation system in which high flow rates are typical. Glass tubes show a low-pressure drop which reduces the energy demand of the ventilator, and additionally, they provide a large exposed surface area to allow interaction between indoor air contaminants and the photocatalyst. Furthermore, the performance of a range of P25-loaded sol-gel coatings was investigated, based on their adhesion properties and photocatalytic activities. Moreover, the UV light transmission and photocatalytic reactor performance under various operating conditions were studied. These results provide vital insights for the further development and scaling up of multi-tube reactors in ventilation systems which can provide a better comfort, improved air quality in indoor environments, and reduced human exposure to harmful pollutants.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000436879200071	Publication Date	2018-04-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0944-1344; 1614-7499	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.741	Times cited	3	Open Access
	Notes	; J.V.W. acknowledges the Agentschap Innoveren and Ondernemen for a PhD fellowship. ;			Approved	Most recent IF: 2.741
	Call Number	UA @ admin @ c:irua:150946			Serial	5967
Permanent link to this record



	Author	Katiyar, K.S.; Lin, A.; Fridman, A.; Keating, C.E.; Cullen, D.K.; Miller, V.
	Title	Non-thermal plasma accelerates astrocyte regrowth and neurite regeneration following physical trauma in vitro			Type	A1 Journal article
	Year	2019	Publication	Applied Sciences	Abbreviated Journal	Appl Sci-Basel
	Volume	9	Issue	18	Pages	3747
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Non-thermal plasma (NTP), defined as a partially ionized gas, is an emerging technology with several biomedical applications, including tissue regeneration. In particular, NTP treatment has been shown to activate endogenous biological processes to promote cell regrowth, differentiation, and proliferation in multiple cell types. However, the effects of this therapy on nervous system regeneration have not yet been established. Accordingly, the current study explored the effects of a nanosecond-pulsed dielectric barrier discharge plasma on neural regeneration. Following mechanical trauma in vitro, plasma was applied either directly to (1) astrocytes alone, (2) neurons alone, or (3) neurons or astrocytes in a non-contact co-culture. Remarkably, we identified NTP treatment intensities that accelerated both neurite regeneration and astrocyte regrowth. In astrocyte cultures alone, an exposure of 20-90 mJ accelerated astrocyte re-growth up to three days post-injury, while neurons required lower treatment intensities (<= 20 mJ) to achieve sub-lethal outgrowth. Following injury to neurons in non-contact co-culture with astrocytes, 20 mJ exposure of plasma to only neurons or astrocytes resulted in increased neurite regeneration at three days post-treatment compared to the untreated, but no enhancement was observed when both cell types were treated. At day seven, although regeneration further increased, NTP did not elicit a significant increase from the control. However, plasma exposure at higher intensities was found to be injurious, underscoring the need to optimize exposure levels. These results suggest that growth-promoting physiological responses may be elicited via properly calibrated NTP treatment to neurons and/or astrocytes. This could be exploited to accelerate neurite re-growth and modulate neuron-astrocyte interactions, thereby hastening nervous system regeneration.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000489115200107	Publication Date	2019-09-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2076-3417	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.679	Times cited	2	Open Access
	Notes				Approved	Most recent IF: 1.679
	Call Number	UA @ admin @ c:irua:163799			Serial	6312
Permanent link to this record



	Author	Nikolova, I.; Janssen, S.; Vrancken, K.; Vos, P.; Mishra, V.; Berghmans, P.
	Title	Size resolved ultrafine particles emission model : a continues size distribution approach			Type	A1 Journal article
	Year	2011	Publication	The science of the total environment	Abbreviated Journal
	Volume	409	Issue	18	Pages	3492-3499
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	A new parameterization for size resolved ultrafine particles (UFP) traffic emissions is proposed based on the results of PARTICULATES project (Samaras et al., 2005). It includes the emission factors from the Emission Inventory Guidebook (2006) (total number of particles, #/km/veh), the shape of the corresponding particle size distribution given in PARTICULATES and data for the traffic activity. The output of the model UFPEM (UltraFine Particle Emission Model) is a sum of continuous distributions of ultrafine particles emissions per vehicle type (passenger cars and heavy duty vehicles), fuel (petrol and diesel) and average speed representative for urban, rural and highway driving. The results from the parameterization are compared with measured total number of ultrafine particles and size distributions in a tunnel in Antwerp (Belgium). The measured UFP concentration over the entire campaign shows a close relation to the traffic activity. The modelled concentration is found to be lower than the measured in the campaign. The average emission factor from the measurement is 4.29E + 14 #/km/veh whereas the calculated is around 30% lower. A comparison of emission factors with literature is done as well and in overall a good agreement is found. For the size distributions it is found that the measured distributions consist of three modes Nucleation, Aitken and accumulation and most of the ultrafine particles belong to the Nucleation and the Aitken modes. The modelled Aitken mode (peak around 0.040.05 μm) is found in a good agreement both as amplitude of the peak and the number of particles whereas the modelled Nucleation mode is shifted to smaller diameters and the peak is much lower that the observed. Time scale analysis shows that at 300 m in the tunnel coagulation and deposition are slow and therefore neglected. The UFPEM emission model can be used as a source term in dispersion models.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000293260100026	Publication Date	2011-06-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0048-9697; 1879-1026	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:91949			Serial	8546
Permanent link to this record



	Author	de Mondt, R.; Adriaensen, L.; Vangaever, F.; Lenaerts, J.; van Vaeck, L.; Gijbels, R.
	Title	Empirical evaluation of metal deposition for the analysis of organic compounds with static secondary ion mass spectrometry (S-SIMS)			Type	A1 Journal article
	Year	2006	Publication	Applied surface science	Abbreviated Journal	Appl Surf Sci
	Volume	252	Issue	19	Pages	6652-6655
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000240609900063	Publication Date	2006-05-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0169-4332;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.387	Times cited	9	Open Access
	Notes				Approved	Most recent IF: 3.387; 2006 IF: 1.436
	Call Number	UA @ lucian @ c:irua:58812			Serial	1034
Permanent link to this record



	Author	Adriaensen, L.; Vangaever, F.; Lenaerts, J.; Gijbels, R.
	Title	S-SIMS and MetA-SIMS study of organic additives in thin polymer coatings			Type	A1 Journal article
	Year	2006	Publication	Applied surface science	Abbreviated Journal	Appl Surf Sci
	Volume	252	Issue	19	Pages	6628-6631
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000240609900057	Publication Date	2006-06-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0169-4332;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.387	Times cited	3	Open Access
	Notes				Approved	Most recent IF: 3.387; 2006 IF: 1.436
	Call Number	UA @ lucian @ c:irua:60083			Serial	2937
Permanent link to this record



	Author	Terzano, R.; Spagnuolo, M.; Vekemans, B.; de Nolf, W.; Janssens, K.; Falkenberg, G.; Ruggiero, P.
	Title	Assessing the origin and fate of CR, Ni, Cu, Zn, Ph, and V in industrial polluted soil by combined microspectroscopic techniques and bulk extraction methods			Type	A1 Journal article
	Year	2007	Publication	Environmental science & technology	Abbreviated Journal
	Volume	41	Issue	19	Pages	6762-6769
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000249840600024	Publication Date	2007-08-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	61	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:66622			Serial	5481
Permanent link to this record



	Author	Jannis, D.; Müller-Caspary, K.; Béché, A.; Verbeeck, J.
	Title	Coincidence Detection of EELS and EDX Spectral Events in the Electron Microscope			Type	A1 Journal article
	Year	2021	Publication	Applied Sciences-Basel	Abbreviated Journal	Appl Sci-Basel
	Volume	11	Issue	19	Pages	9058
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Recent advances in the development of electron and X-ray detectors have opened up the possibility to detect single events from which its time of arrival can be determined with nanosecond resolution. This allows observing time correlations between electrons and X-rays in the transmission electron microscope. In this work, a novel setup is described which measures individual events using a silicon drift detector and digital pulse processor for the X-rays and a Timepix3 detector for the electrons. This setup enables recording time correlation between both event streams while at the same time preserving the complete conventional electron energy loss (EELS) and energy dispersive X-ray (EDX) signal. We show that the added coincidence information improves the sensitivity for detecting trace elements in a matrix as compared to conventional EELS and EDX. Furthermore, the method allows the determination of the collection efficiencies without the use of a reference sample and can subtract the background signal for EELS and EDX without any prior knowledge of the background shape and without pre-edge fitting region. We discuss limitations in time resolution arising due to specificities of the silicon drift detector and discuss ways to further improve this aspect.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000710160300001	Publication Date	2021-09-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2076-3417	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.679	Times cited	9	Open Access	OpenAccess
	Notes	Fonds Wetenschappelijk Onderzoek, G042920 ; Horizon 2020 Framework Programme, 101017720 ; Helmholtz-Fonds, VH-NG-1317 ;			Approved	Most recent IF: 1.679
	Call Number	EMAT @ emat @c:irua:183336			Serial	6821
Permanent link to this record



	Author	Samal, S.K.; Soenen, S.; Puppi, D.; De Wael, K.; Pati, S.; De Smedt, S.; Braeckmans, K.; Dubruel, P.
	Title	Bio-nanohybrid gelatin/quantum dots for cellular imaging and biosensing applications			Type	A1 Journal article
	Year	2022	Publication	International journal of molecular sciences	Abbreviated Journal
	Volume	23	Issue	19	Pages	11867-12
	Keywords	A1 Journal article; Antwerp Electrochemical and Analytical Sciences Lab (A-Sense Lab)
	Abstract	The bio-nanohybrid gelatin protein/cadmium sulfide (Gel/CdS) quantum dots (QDs) have been designed via a facile one-pot strategy. The amino acids group of gelatin chelate Cd2+ and grow CdS QDs without any agglomeration. The H-1 NMR spectra indicate that during the above process there are no alterations of the gelatin protein structure conformation and chemical functionalities. The prepared Gel/CdS QDs were characterized and their potential as a system for cellular imaging and the electrochemical sensor for hydrogen peroxide (H2O2) detection applications were investigated. The obtained results demonstrate that the developed Gel/CdS QDs system could offer a simple and convenient operating strategy both for the class of contrast agents for cell labeling and electrochemical sensors purposes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000867759600001	Publication Date	2022-10-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1422-0067; 1661-6596	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access	OpenAccess
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:191566			Serial	8836
Permanent link to this record



	Author	Semenov, M.Y.; Van Grieken, R.
	Title	Base cation fluxes in mountain landscapes of Lake Baikal southern shore			Type	A1 Journal article
	Year	2007	Publication	Communications in soil science and plant analysis	Abbreviated Journal
	Volume	38	Issue	19-20	Pages	2635-2646
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000251885800005	Publication Date	2007-11-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0010-3624	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:65351			Serial	7551
Permanent link to this record



	Author	Barbier, M.; Vasilopoulos, P.; Peeters, F.M.
	Title	Single-layer and bilayer graphene superlattices: collimation, additional Dirac points and Dirac lines			Type	A1 Journal article
	Year	2010	Publication	Philosophical transactions of the Royal Society : mathematical, physical and engineering sciences	Abbreviated Journal	Philos T R Soc A
	Volume	368	Issue	1932	Pages	5499-5524
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We review the energy spectrum and transport properties of several types of one-dimensional superlattices (SLs) on single-layer and bilayer graphene. In single-layer graphene, for certain SL parameters an electron beam incident on an SL is highly collimated. On the other hand, there are extra Dirac points generated for other SL parameters. Using rectangular barriers allows us to find analytical expressions for the location of new Dirac points in the spectrum and for the renormalization of the electron velocities. The influence of these extra Dirac points on the conductivity is investigated. In the limit of δ-function barriers, the transmission T through and conductance G of a finite number of barriers as well as the energy spectra of SLs are periodic functions of the dimensionless strength P of the barriers, Graphic, with vF the Fermi velocity. For a KronigPenney SL with alternating sign of the height of the barriers, the Dirac point becomes a Dirac line for P = π/2+nπ with n an integer. In bilayer graphene, with an appropriate bias applied to the barriers and wells, we show that several new types of SLs are produced and two of them are similar to type I and type II semiconductor SLs. Similar to single-layer graphene SLs, extra Dirac points are found in bilayer graphene SLs. Non-ballistic transport is also considered.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000283660000011	Publication Date	2010-11-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1364-503X;1471-2962;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.97	Times cited	64	Open Access
	Notes	; This work was supported by IMEC, the Flemish Science Foundation (FWO-Vl), the Belgian Science Policy (IAP) and the Canadian NSERC through grant no. OGP0121756. ;			Approved	Most recent IF: 2.97; 2010 IF: 2.459
	Call Number	UA @ lucian @ c:irua:85597			Serial	3023
Permanent link to this record



	Author	Yan, L.; Niu, H.J.; Duong, G.V.; Suchomel, M.R.; Bacsa, J.; Chalker, P.R.; Hadermann, J.; Van Tendeloo, G.; Rosseinsky, M.J.
	Title	Cation ordering within the perovskite block of a six-layer Ruddlesden-Popper oxide from layer-by-layer growth artificial interfaces in complex unit cells			Type	A1 Journal article
	Year	2011	Publication	Chemical science	Abbreviated Journal	Chem Sci
	Volume	2	Issue	2	Pages	261-272
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The (AO)(ABO3)n Ruddlesden-Popper structure is an archetypal complex oxide consisting of two distinct structural units, an (AO) rock salt layer separating an n-octahedra thick perovskite block. Conventional high-temperature oxide synthesis methods cannot access members with n > 3, but low-temperature layer-by-layer thin film methods allow the preparation of materials with thicker perovskite blocks, exploiting high surface mobility and lattice matching with the substrate. This paper describes the growth of an n = 6 member CaO[(CSMO)2(LCMO)2 (CSMO)2] in which the six unit cell perovskite block is sub-divided into two central La0.67Ca0.33MnO3 (LCMO) and two terminal Ca0.85Sm0.15MnO3 (CSMO) layers to allow stabilization of the rock salt layer and variation of the transition metal charge.
	Address
	Corporate Author				Thesis
	Publisher	Royal Society of Chemistry	Place of Publication	Cambridge	Editor
	Language		Wos	000286327600010	Publication Date	2010-11-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2041-6520;2041-6539;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.668	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 8.668; 2011 IF: 7.525
	Call Number	UA @ lucian @ c:irua:88652			Serial	300
Permanent link to this record



	Author	Kerner, C.; Hackens, B.; Golubović, D.S.; Poli, S.; Faniel, S.; Magnus, W.; Schoenmaker, W.; Bayot, V.; Maes, H.
	Title	Control and readout of current-induced magnetic flux quantization in a superconducting transformer			Type	A1 Journal article
	Year	2009	Publication	Superconductor science and technology	Abbreviated Journal	Supercond Sci Tech
	Volume	22	Issue	2	Pages	025001,1-025001,4
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We demonstrate a simple and robust method for inducing and detecting changes of magnetic flux quantization in the absence of an externally applied magnetic field. In our device, an isolated ring is interconnected with two access loops via permalloy cores, forming a superconducting transformer. By applying and tuning a direct current at the first access loop, the number of flux quanta trapped in the isolated ring is modified without the aid of an external field. The flux state of the isolated ring is simply detected by recording the evolution of the critical current of the second access loop.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000262786000003	Publication Date	2008-12-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0953-2048;1361-6668;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.878	Times cited	2	Open Access
	Notes				Approved	Most recent IF: 2.878; 2009 IF: 2.694
	Call Number	UA @ lucian @ c:irua:76001			Serial	497
Permanent link to this record