Home | << 1 2 >> |
![]() |
Records | |||||
---|---|---|---|---|---|
Author | Uytdenhouwen, Y.; Bal, Km.; Michielsen, I.; Neyts, Ec.; Meynen, V.; Cool, P.; Bogaerts, A. | ||||
Title | How process parameters and packing materials tune chemical equilibrium and kinetics in plasma-based CO2 conversion | Type | A1 Journal article | ||
Year ![]() |
2019 | Publication | Chemical engineering journal | Abbreviated Journal | Chem Eng J |
Volume | 372 | Issue | Pages | 1253-1264 | |
Keywords | A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | Plasma (catalysis) reactors are increasingly being used for gas-based chemical conversions, providing an alternative method of energy delivery to the molecules. In this work we explore whether classical concepts such as equilibrium constants, (overall) rate coefficients, and catalysis exist under plasma conditions. We specifically investigate the existence of a so-called partial chemical equilibrium (PCE), and how process parameters and packing properties influence this equilibrium, as well as the overall apparent rate coefficient, for CO2 splitting in a DBD plasma reactor. The results show that a PCE can be reached, and that the position of the equilibrium, in combination with the rate coefficient, greatly depends on the reactor parameters and operating conditions (i.e., power, pressure, and gap size). A higher power, higher pressure, or smaller gap size enhance both the equilibrium constant and the rate coefficient, although they cannot be independently tuned. Inserting a packing material (non-porous SiO2 and ZrO2 spheres) in the reactor reveals interesting gap/material effects, where the type of material dictates the position of the equilibrium and the rate (inhibition) independently. As a result, no apparent synergistic effect or plasma-catalytic behaviour was observed for the non-porous packing materials studied in this reaction. Within the investigated parameters, equilibrium conversions were obtained between 23 and 71%, while the rate coefficient varied between 0.027 s−1 and 0.17 s−1. This method of analysis can provide a more fundamental insight in the overall reaction kinetics of (catalytic) plasma-based gas conversion, in order to be able to distinguish plasma effects from true catalytic enhancement. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000471670400116 | Publication Date | 2019-05-08 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1385-8947 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 6.216 | Times cited | 3 | Open Access | Not_Open_Access: Available from 05.05.2021 |
Notes | European Fund for Regional Development; FWOFWO, G.0254.14N ; University of Antwerp; FWO-FlandersFWO-Flanders, 11V8915N ; The authors acknowledge financial support from the European Fund for Regional Development through the cross-border collaborative Interreg V program Flanders-the Netherlands (project EnOp), the Fund for Scientific Research (FWO; Grant Number: G.0254.14N), a TOP-BOF project and an IOF-SBO (SynCO2Chem) project from the University of Antwerp. K. M. B. was funded as a PhD fellow (aspirant) of the FWOFlanders (Fund for Scientific Research-Flanders), Grant 11V8915N. | Approved | Most recent IF: 6.216 | ||
Call Number | PLASMANT @ plasmant @UA @ admin @ c:irua:159979 | Serial | 5171 | ||
Permanent link to this record | |||||
Author | Michielsen, I.; Uytdenhouwen, Y.; Bogaerts, A.; Meynen, V. | ||||
Title | Altering conversion and product selectivity of dry reforming of methane in a dielectric barrier discharge by changing the dielectric packing material | Type | A1 Journal article | ||
Year ![]() |
2019 | Publication | Catalysts | Abbreviated Journal | Catalysts |
Volume | 9 | Issue | 1 | Pages | 51 |
Keywords | A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | We studied the influence of dense, spherical packing materials, with different chemical compositions, on the dry reforming of methane (DRM) in a dielectric barrier discharge (DBD) reactor. Although not catalytically activated, a vast effect on the conversion and product selectivity could already be observed, an influence which is often neglected when catalytically activated plasma packing materials are being studied. The alpha-Al2O3 packing material of 2.0-2.24 mm size yields the highest total conversion (28%), as well as CO2 (23%) and CH4 (33%) conversion and a high product fraction towards CO (similar to 70%) and ethane (similar to 14%), together with an enhanced CO/H-2 ratio of 9 in a 4.5 mm gap DBD at 60 W and 23 kHz. gamma-Al2O3 is only slightly less active in total conversion (22%) but is even more selective in products formed than alpha-Al2O3 BaTiO3 produces substantially more oxygenated products than the other packing materials but is the least selective in product fractions and has a clear negative impact on CO2 conversion upon addition of CH4. Interestingly, when comparing to pure CO2 splitting and when evaluating differences in products formed, significantly different trends are obtained for the packing materials, indicating a complex impact of the presence of CH4 and the specific nature of the packing materials on the DRM process. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000459732000051 | Publication Date | 2019-01-10 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2073-4344 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles; WoS full record; WoS citing articles | |
Impact Factor | 3.082 | Times cited | 4 | Open Access | OpenAccess |
Notes | Approved | Most recent IF: 3.082 | |||
Call Number | UA @ admin @ c:irua:158666 | Serial | 5268 | ||
Permanent link to this record | |||||
Author | Rahemi, V.; Trashin, S.; Hafideddine, Z.; Meynen, V.; Van Doorslaer, S.; De Wael, K. | ||||
Title | Enzymatic sensor for phenols based on titanium dioxide generating surface confined ROS after treatment with H2O2 | Type | A1 Journal article | ||
Year ![]() |
2019 | Publication | Sensors and actuators : B : chemical | Abbreviated Journal | Sensor Actuat B-Chem |
Volume | 283 | Issue | 283 | Pages | 343-348 |
Keywords | A1 Journal article; Laboratory of adsorption and catalysis (LADCA); AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
Abstract | Titanium dioxide (TiO2) is a popular material as host matrix for enzymes. We now evidence that TiO2 can accumulate and retain reactive oxygen species after treatment by hydrogen peroxide (H2O2) and support redox cycling of a phenolic analyte between horseradish peroxidase (HRP) and an electrode. The proposed detection scheme is identical to that of second generation biosensors, but the measuring solution requires no dissolved H2O2. This significantly simplifies the analysis and overcomes issues related to H2O2 being present (or generated) in the solution. The modified electrodes showed rapid stabilization of the baseline, a low noise level, fast realization of a steady-state current response, and, in addition, improved sensitivity and limit of detection compared to the conventional approach, i.e. in the presence of H2O2 in the measuring solution. Hydroquinone, 4-aminophenol, and other phenolic compounds were successfully detected at sub-μM concentrations. Particularly, a linear response in the concentration range between 0.025 and 2 μM and LOD of 24 nM was demonstrated for 4-aminophenol. The proposed sensor design goes beyond the traditional concept with three sensors generations offering a new possibility for the development of enzymatic sensors based on peroxidases and the formation of ROS on titania after treatment with H2O2. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000455854000043 | Publication Date | 2018-12-10 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0925-4005 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.401 | Times cited | 1 | Open Access | |
Notes | ; The authors thank the University of Antwerp for GOA funding and the Scientific Research-Flanders (FWO) (grant 12T4219N). V. Rahemi is financially supported through a postdoctoral fellowship of the Research Foundation-Flanders (FWO). ; | Approved | Most recent IF: 5.401 | ||
Call Number | UA @ admin @ c:irua:155665 | Serial | 5605 | ||
Permanent link to this record | |||||
Author | Rahemi, V.; Trashin, S.; Hafideddine, Z.; Van Doorslaer, S.; Meynen, V.; Gorton, L.; De Wael, K. | ||||
Title | Amperometric flow-injection analysis of phenols induced by reactive oxygen species generated under daylight irradiation of titania impregnated with horseradish peroxidase | Type | A1 Journal article | ||
Year ![]() |
2020 | Publication | Analytical Chemistry | Abbreviated Journal | Anal Chem |
Volume | 92 | Issue | 92 | Pages | 3643-3649 |
Keywords | A1 Journal article; Laboratory of adsorption and catalysis (LADCA); AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
Abstract | Titanium dioxide (TiO2) is a unique material for biosensing applications due to its capability of hosting enzymes. For the first time, we show that TiO2 can accumulate reactive oxygen species (ROS) under daylight irradiation and can support the catalytic cycle of horseradish peroxidase (HRP) without the need of H2O2 to be present in the solution. Phenolic compounds, such as hydroquinone (HQ) and 4-aminophenol (4-AP), were detected amperometrically in flow-injection analysis (FIA) mode via the use of an electrode modified with TiO2 impregnated with HRP. In contrast to the conventional detection scheme, no H2O2 was added to the analyte solution. Basically, the inherited ability of TiO2 to generate reactive oxygen species is used as a strategy to avoid adding H2O2 in the solution during the detection of phenolic compounds. Electron paramagnetic resonance (EPR) spectroscopy indicates the presence of ROS on titania which, in interaction with HRP, initiate the electrocatalysis toward phenolic compounds. The amperometric response to 4-AP was linear in the concentration range between 0.05 and 2 μM. The sensitivity was 0.51 A M–1 cm–2, and the limit of detection (LOD) 26 nM. The proposed sensor design opens new opportunities for the detection of phenolic traces by HRP-based electrochemical biosensors, yet in a more straightforward and sensitive way following green chemistry principles of avoiding the use of reactive and harmful chemical, such as H2O2. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000518234700023 | Publication Date | 2020-01-27 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0003-2700; 5206-882x | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 7.4 | Times cited | 3 | Open Access | |
Notes | ; The authors thank Scientific Reseatch-Flanders (F-WO) (grant 12T4219N) for funding. ; | Approved | Most recent IF: 7.4; 2020 IF: 6.32 | ||
Call Number | UA @ admin @ c:irua:166241 | Serial | 5463 | ||
Permanent link to this record | |||||
Author | Uytdenhouwen, Y.; Meynen, V.; Cool, P.; Bogaerts, A. | ||||
Title | The Potential Use of Core-Shell Structured Spheres in a Packed-Bed DBD Plasma Reactor for CO2 Conversion | Type | A1 Journal article | ||
Year ![]() |
2020 | Publication | Catalysts | Abbreviated Journal | Catalysts |
Volume | 10 | Issue | 5 | Pages | 530 |
Keywords | A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | This work proposes to use core-shell structured spheres to evaluate whether it allows to individually optimize bulk and surface effects of a packing material, in order to optimize conversion and energy efficiency. Different core-shell materials have been prepared by spray coating, using dense spheres (as core) and powders (as shell) of SiO2, Al2O3, and BaTiO3. The materials are investigated for their performance in CO2 dissociation and compared against a benchmark consisting of a packed-bed reactor with the pure dense spheres, as well as an empty reactor. The results in terms of CO2 conversion and energy efficiency show various interactions between the core and shell material, depending on their combination. Al2O3 was found as the best core material under the applied conditions here, followed by BaTiO3 and SiO2, in agreement with their behaviour for the pure spheres. Applying a thin shell layer on the cores showed equal performance between the different shell materials. Increasing the layer thickness shifts this behaviour, and strong combination effects were observed depending on the specific material. Therefore, this method of core-shell spheres has the potential to allow tuning of the packing properties more closely to the application by designing an optimal combination of core and shell. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000546007000092 | Publication Date | 2020-05-11 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2073-4344 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.9 | Times cited | Open Access | ||
Notes | Interreg, Project EnOp ; Fonds Wetenschappelijk Onderzoek, G.0254.14N ; Universiteit Antwerpen, Project SynCO2Chem ; We want to thank Jasper Lefevre (VITO) for assistance in the development of the coating suspension for the core-shell spheres. | Approved | Most recent IF: 3.9; 2020 IF: 3.082 | ||
Call Number | PLASMANT @ plasmant @c:irua:169222 | Serial | 6364 | ||
Permanent link to this record | |||||
Author | Van Dijck, J.G.; Mampuys, P.; Ching, H.Y.V.; Krishnan, D.; Baert, K.; Hauffman, T.; Verbeeck, J.; Van Doorslaer, S.; Maes, B.U.W.; Dorbec, M.; Buekenhoudt, A.; Meynen, V. | ||||
Title | Synthesis – properties correlation and the unexpected role of the titania support on the Grignard surface modification | Type | A1 Journal article | ||
Year ![]() |
2020 | Publication | Applied Surface Science | Abbreviated Journal | Appl Surf Sci |
Volume | 527 | Issue | Pages | 146851-17 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA); Organic synthesis (ORSY); Applied Electrochemistry & Catalysis (ELCAT) | ||||
Abstract | While the impact of reaction conditions on surface modification with Grignard reactants has been studied for silica supports, such information is absent for metal oxides like titania. Differences between modified titania and silica are observed, making it paramount to explore the reaction mechanism. A detailed study on the impact of the reaction conditions is reported, with a focus on the chain length of the alkyl Grignard reactant, its concentration, the reaction time and temperature, and the type of titania support. While the increase in the chain length reduces the amount of organic groups on the surface, the concentration, time and temperature show little/no influence on the modification degree. However, the type of titania support used and the percentage of amorphous phase present has a significant impact on the amount of grafted groups. Even though the temperature and concentration show no clear impact on the modification degree, they can cause changes in the surface hydroxyl population, which are thus not linked to the modification degree. Furthermore, the titania support is reduced during functionalization. This reduction dependents on the reaction temperature, the titania support and the chain length of the Grignard reactant. Similarly, this reduction is not linked to the modification degree. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000564205300003 | Publication Date | 2020-06-03 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0169-4332 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 6.7 | Times cited | 5 | Open Access | OpenAccess |
Notes | ; The FWO (Fonds Wetenschappelijk Onderzoek) is gratefully acknowledged for the VITO-FWO grant of fellow Jeroen G. Van Dijck (11W9416N) and the financial support granted in project GO12712N. The E.U. is acknowledged for H.Y. Vincent Ching's H2020-MSCA-IF (grant number 792946, iSPY). Dileep Krishnan and Johan Verbeeck acknowledge funding from GOA project “solarpaint” of the University of Antwerp. ; | Approved | Most recent IF: 6.7; 2020 IF: 3.387 | ||
Call Number | UA @ admin @ c:irua:169722 | Serial | 6712 | ||
Permanent link to this record | |||||
Author | Uytdenhouwen, Y.; Bal, Km.; Neyts, Ec.; Meynen, V.; Cool, P.; Bogaerts, A. | ||||
Title | On the kinetics and equilibria of plasma-based dry reforming of methane | Type | A1 Journal article | ||
Year ![]() |
2021 | Publication | Chemical Engineering Journal | Abbreviated Journal | Chem Eng J |
Volume | 405 | Issue | Pages | 126630 | |
Keywords | A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | Plasma reactors are interesting for gas-based chemical conversion but the fundamental relation between the plasma chemistry and selected conditions remains poorly understood. Apparent kinetic parameters for the loss and formation processes of individual components of gas conversion processes, can however be extracted by performing experiments in an extended residence time range (2–75 s) and fitting the gas composition to a firstorder kinetic model of the evolution towards partial chemical equilibrium (PCE). We specifically investigated the differences in kinetic characteristics and PCE state of the CO2 dissociation and CH4 reforming reactions in a dielectric barrier discharge reactor (DBD), how these are mutually affected when combining both gases in the dry reforming of methane (DRM) reaction, and how they change when a packing material (non-porous SiO2) is added to the reactor. We find that CO2 dissociation is characterized by a comparatively high reaction rate of 0.120 s−1 compared to CH4 reforming at 0.041 s−1; whereas CH4 reforming reaches higher equilibrium conversions, 82% compared to 53.6% for CO2 dissociation. Combining both feed gases makes the DRM reaction to proceed at a relatively high rate (0.088 s−1), and high conversion (75.4%) compared to CO2 dissociation, through accessing new chemical pathways between the products of CO2 and CH4. The addition of the packing material can also distinctly influence the conversion rate and position of the equilibrium, but its precise effect depends strongly on the gas composition. Comparing different CO2:CH4 ratios reveals the delicate balance of the combined chemistry. CO2 drives the loss reactions in DRM, whereas CH4 in the mixture suppresses back reactions. As a result, our methodology provides some of the insight necessary to systematically tune the conversion process. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000621197700003 | Publication Date | 2020-08-12 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1385-8947 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 6.216 | Times cited | Open Access | OpenAccess | |
Notes | The authors acknowledge financial support from the European Fund for Regional Development through the cross-border collaborative Interreg V program Flanders-the Netherlands (project EnOp), the Fund for Scientific Research (FWO; grant number: G.0254.14N), a TOP-BOF project and an IOF-SBO (SynCO2Chem) project from the University of Antwerp. | Approved | Most recent IF: 6.216 | ||
Call Number | PLASMANT @ plasmant @c:irua:172458 | Serial | 6411 | ||
Permanent link to this record | |||||
Author | Kaliyappan, P.; Paulus, A.; D’Haen, J.; Samyn, P.; Uytdenhouwen, Y.; Hafezkhiabani, N.; Bogaerts, A.; Meynen, V.; Elen, K.; Hardy, A.; Van Bael, M.K. | ||||
Title | Probing the impact of material properties of core-shell SiO₂@TiO₂ spheres on the plasma-catalytic CO₂ dissociation using a packed bed DBD plasma reactor | Type | A1 Journal article | ||
Year ![]() |
2021 | Publication | Journal Of Co2 Utilization | Abbreviated Journal | J Co2 Util |
Volume | 46 | Issue | Pages | 101468 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | Plasma catalysis, a promising technology for conversion of CO2 into value-added chemicals near room temperature, is gaining increasing interest. A dielectric barrier discharge (DBD) plasma has attracted attention due to its simple design and operation at near ambient conditions, ease to implement catalysts in the plasma zone and upscaling ability to industrial applications. To improve its main drawbacks, being relatively low conversion and energy efficiency, a packing material is used in the plasma discharge zone of the reactor, sometimes decorated by a catalytic material. Nevertheless, the extent to which different properties of the packing material influence plasma performance is still largely unexplored and unknown. In this study, the particular effect of synthesis induced differences in the morphology of a TiO2 shell covering a SiO2 core packing material on the plasma conversion of CO2 is studied. TiO2 has been successfully deposited around 1.6–1.8 mm sized SiO2 spheres by means of spray coating, starting from aqueous citratoperoxotitanate(IV) precursors. Parameters such as concentration of the Ti(IV) precursor solutions and addition of a binder were found to affect the shells’ properties and surface morphology and to have a major impact on the CO2 conversion in a packed bed DBD plasma reactor. Core-shell SiO2@TiO2 obtained from 0.25 M citratoperoxotitante(IV) precursors with the addition of a LUDOX binder showed the highest CO2 conversion 37.7% (at a space time of 70 s corresponding to an energy efficiency of 2%) and the highest energy efficiency of 4.8% (at a space time of 2.5 s corresponding to a conversion of 3%). | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000634280300004 | Publication Date | 2021-02-15 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2212-9820 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.292 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 4.292 | |||
Call Number | UA @ admin @ c:irua:175958 | Serial | 6773 | ||
Permanent link to this record | |||||
Author | Wang, J.; Zhang, K.; Kavak, S.; Bals, S.; Meynen, V. | ||||
Title | Modifying the Stöber Process: Is the Organic Solvent Indispensable? | Type | A1 Journal Article | ||
Year ![]() |
2022 | Publication | Chemistry-A European Journal | Abbreviated Journal | Chem-Eur J |
Volume | Issue | Pages | |||
Keywords | A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; | ||||
Abstract | The Stöber method is one of the most important and fundamental processes for the synthesis of inorganic (nano)materials but has the drawback of using a large amount of organic solvent. Herein, ethanol was used as an example to explore if the organic solvent in a typical Stöber method can be omitted. It was found that ethanol increases the particle size of the obtained silica spheres and aids the formation of uniform silica particles rather than forming a gel. Nevertheless, the results indicated that an organic solvent in the initial synthesis mixture is not indispensable. An initially immiscible synthesis method was discovered, which can replace the organic solvent-based Stöber method to successfully synthesize silica particles with the same size ranges as the original Stöber process without addition of organic solvents. Moreover, this process can be of further value for the extension to synthesis processes of other materials based on the Stöber process. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000898283500001 | Publication Date | 2022-12-14 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0947-6539 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.3 | Times cited | 3 | Open Access | OpenAccess |
Notes | The authors are grateful to Alexander Vansant and Dr. Steven Mullens of VITO for their contributions to the DLS measurements in this paper. J.W acknowledges the State Scholarship funded by the China Scholarship Council (201806060123). K.Z acknowledges the EASiCHEM project funded by the Flemish Strategic Basic Research Program of the Catalisti cluster and Flanders Innovation & Entrepreneurship (HBC.2018.0484). S.K acknowledges the Flemish Fund for Scientific Research (FWO Flanders) through a PhD research grant (1181122N). | Approved | Most recent IF: 4.3 | ||
Call Number | EMAT @ emat @c:irua:191646 | Serial | 7233 | ||
Permanent link to this record | |||||
Author | Wang, J.; Zhang, K.; Bogaerts, A.; Meynen, V. | ||||
Title | 3D porous catalysts for plasma-catalytic dry reforming of methane : how does the pore size affect the plasma-catalytic performance? | Type | A1 Journal article | ||
Year ![]() |
2023 | Publication | Chemical engineering journal | Abbreviated Journal | |
Volume | 464 | Issue | Pages | 142574-12 | |
Keywords | A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | The effect of pore size on plasma catalysis is crucial but still unclear. Studies have shown plasma cannot enter micropores and mesopores, so catalysts for traditional thermocatalysis may not fit plasma catalysis. Here, 3D porous Cu and CuO with different pore sizes were prepared using uniform silica particles (10–2000 nm) as templates, and compared in plasma-catalytic dry reforming. In most cases, the smaller the pore size, the higher the conversion of CH4 and CO2. Large pores reachable by more electrons did not improve the reaction efficiency. We attribute this to the small surface area and large crystallite size, as indicated by N2-sorption, mercury intrusion and XRD. While the smaller pores might not be reachable by electrons, due to the sheath formed in front of them, as predicted by modeling, they can still be reached by radicals formed in the plasma, and ions can even be attracted into these pores. An exception are the samples synthesized from 1 μm silica, which show better performance. We believe this is due to the electric field enhancement for pore sizes close to the Debye length. The performances of CuO and Cu with different pore sizes can provide references for future research on oxide supports and metal components of plasma catalysts. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000966076400001 | Publication Date | 2023-03-21 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1385-8947; 1873-3212 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 15.1 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 15.1; 2023 IF: 6.216 | |||
Call Number | UA @ admin @ c:irua:194862 | Serial | 7262 | ||
Permanent link to this record | |||||
Author | Wang, J.; Zhang, K.; Meynen, V.; Bogaerts, A. | ||||
Title | Dry reforming in a dielectric barrier discharge reactor with non-uniform discharge gap : effects of metal rings on the discharge behavior and performance | Type | A1 Journal article | ||
Year ![]() |
2023 | Publication | Chemical engineering journal | Abbreviated Journal | |
Volume | Issue | Pages | 142953-29 | ||
Keywords | A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | The application of dielectric barrier discharge (DBD) plasma reactors is promising in various environmental and energy processes, but is limited by their low energy yield. In this study, we put a number of stainless steel rings over the inner electrode rod of the DBD reactor to change the local discharge gap and electric field, and we studied the dry reforming performance. At 50 W supplied power, the metal rings mostly have a negative impact on the performance, which we attribute to the non-uniform spatial distribution of the discharges caused by the rings. However, at 30 W supplied power, the energy yield is higher than at 50 W and the placement of the rings improves the performance of the reactor. More rings and with a larger cross-sectional diameter can further improve the performance. The reactor with 20 rings with a 3.2 mm cross-sectional diameter exhibits the best performance in this study. Compared to the reactor without rings, it increases the CO2 conversion from 7% to 16 %, the CH4 conversion from 12% to 23%, and the energy yield from 0.05 mmol/kJ supplied power to 0.1 mmol/kJ (0.19 mmol/kJ if calculated from the plasma power), respectively. The presence of the rings increases the local electric field, the displaced charge and the discharge fraction, and also makes the discharge more stable and with more uniform intensity. It also slightly improves the selectivity to syngas. The performance improvement observed by placing stainless steel rings in this study may also be applicable to other plasma-based processes. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000986051300001 | Publication Date | 2023-04-17 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1385-8947; 1873-3212 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 15.1 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 15.1; 2023 IF: 6.216 | |||
Call Number | UA @ admin @ c:irua:195603 | Serial | 7264 | ||
Permanent link to this record | |||||
Author | Wang, J.; Zhang, K.; Mertens, M.; Bogaerts, A.; Meynen, V. | ||||
Title | Plasma-based dry reforming of methane in a dielectric barrier discharge reactor: Importance of uniform (sub)micron packings/catalysts to enhance the performance | Type | A1 Journal Article | ||
Year ![]() |
2023 | Publication | APPLIED CATALYSIS B-ENVIRONMENTAL | Abbreviated Journal | |
Volume | 337 | Issue | Pages | 122977 | |
Keywords | A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
Abstract | This study presents new insights on the effect of (sub)micrometer particle sized materials in plasma-based CO2- CH4 reforming by investigating the performance of SiO2 spheres (with/without supported metal) of varying particle sizes. (Sub)micron particles synthesized through the St¨ober method were used instead of (sub)millimeter particles employed in previous studies. Increasing particle size (from 120 nm to 2390 nm) was found to first increase and then decrease conversion and energy yield, with optimal performance achieved using 740 nm 5 wt% Ni loaded SiO2, which improved CO2 and CH4 conversion, and energy yield to 44%, 55%, and 0.271 mmol/kJ, respectively, compared to 20%, 27%, and 0.116 mmol/kJ in an empty reactor at the same flow rate. This is the first to achieve significant performance improvement in a fully packed reactor, highlighting the importance of selecting a suitable particle size. The findings can offer guidance towards rational design of catalysts for plasmabased reactions. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001056527600001 | Publication Date | 2023-06-09 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0926-3373 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 22.1 | Times cited | Open Access | Not_Open_Access | |
Notes | This work is supported by the China Scholarship Council (No. 201806060123); and the VLAIO Catalisti transition project CO2PERATE (HBC.2017.0692). K.Z acknowledges the EASiCHEM project funded by the Flemish Strategic Basic Research Program of the Catalisti cluster and Flanders Innovation & Entrepreneurship (HBC.2018.0484). | Approved | Most recent IF: 22.1; 2023 IF: 9.446 | ||
Call Number | PLASMANT @ plasmant @c:irua:196955 | Serial | 8797 | ||
Permanent link to this record | |||||
Author | Wang, J.; Zhang, K.; Mertens, M.; Bogaerts, A.; Meynen, V. | ||||
Title | Plasma-based dry reforming of methane in a dielectric barrier discharge reactor: Importance of uniform (sub)micron packings/catalysts to enhance the performance | Type | A1 Journal Article | ||
Year ![]() |
2023 | Publication | APPLIED CATALYSIS B-ENVIRONMENTAL | Abbreviated Journal | |
Volume | 337 | Issue | Pages | 122977 | |
Keywords | A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
Abstract | This study presents new insights on the effect of (sub)micrometer particle sized materials in plasma-based CO2- CH4 reforming by investigating the performance of SiO2 spheres (with/without supported metal) of varying particle sizes. (Sub)micron particles synthesized through the St¨ober method were used instead of (sub)millimeter particles employed in previous studies. Increasing particle size (from 120 nm to 2390 nm) was found to first increase and then decrease conversion and energy yield, with optimal performance achieved using 740 nm 5 wt% Ni loaded SiO2, which improved CO2 and CH4 conversion, and energy yield to 44%, 55%, and 0.271 mmol/kJ, respectively, compared to 20%, 27%, and 0.116 mmol/kJ in an empty reactor at the same flow rate. This is the first to achieve significant performance improvement in a fully packed reactor, highlighting the importance of selecting a suitable particle size. The findings can offer guidance towards rational design of catalysts for plasmabased reactions. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001056527600001 | Publication Date | 2023-06-09 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0926-3373 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 22.1 | Times cited | Open Access | Not_Open_Access | |
Notes | This work is supported by the China Scholarship Council (No. 201806060123); and the VLAIO Catalisti transition project CO2PERATE (HBC.2017.0692). K.Z acknowledges the EASiCHEM project funded by the Flemish Strategic Basic Research Program of the Catalisti cluster and Flanders Innovation & Entrepreneurship (HBC.2018.0484). | Approved | Most recent IF: 22.1; 2023 IF: 9.446 | ||
Call Number | PLASMANT @ plasmant @c:irua:196955 | Serial | 8798 | ||
Permanent link to this record | |||||
Author | Ramesha, B.M.; Pawlak, B.; Arenas Esteban, D.; Reekmans, G.; Bals, S.; Marchal, W.; Carleer, R.; Adriaensens, P.; Meynen, V. | ||||
Title | Partial hydrolysis of diphosphonate ester during the formation of hybrid Tio₂ nanoparticles : role of acid concentration | Type | A1 Journal article | ||
Year ![]() |
2023 | Publication | ChemPhysChem : a European journal of chemical physics and physical chemistry | Abbreviated Journal | |
Volume | Issue | Pages | e202300437-13 | ||
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA) | ||||
Abstract | In the present work, a method was utilized to control the in‐situ partial hydrolysis of a diphosphonate ester in presence of a titania precursor and in function of acid content and its impact on the hybrid nanoparticles was assessed. The hydrolysis degree of organodiphosphonate ester linkers during the formation of hybrid organic‐inorganic metal oxide nanoparticles, are relatively underexplored . Quantitative solution NMR spectroscopy revealed that during the synthesis of TiO2 nanoparticles, an increase in acid concentration introduces a higher degree of partial hydrolysis of the TEPD linker into diverse acid/ester derivatives of TEPD. Increasing the HCl/Ti ratio from 1 to 3, resulted in an increase in degree of partial hydrolysis of the TEPD linker in solution from 4% to 18.8% under the here applied conditions. As a result of the difference in partial hydrolysis, the linker‐TiO2 bonding was altered. Upon subsequent drying of the colloidal TiO2 solution, different textures, at nanoscale and macroscopic scale, were obtained dependent on the HCl/Ti ratio and thus the degree of hydrolysis of TEPD. Understanding such linker‐TiO2 nanoparticle surface dynamics is crucial for making hybrid organic‐inorganic materials (i.e. (porous) metal phosphonates) employed in applications such as electronic/photonic devices, separation technology and heterogeneous catalysts. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001071673900001 | Publication Date | 2023-09-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1439-4235; 1439-7641 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 2.9 | Times cited | Open Access | OpenAccess | |
Notes | This work was supported by the Research Foundation-Flanders (FWO Vlaanderen) Project G.0121.17 N. The work was further supported by Hasselt University and the Research Foundation – Flanders (FWO Vlaanderen) via the Hercules project AUHL/15/2 – GOH3816 N. V. M. acknowledges the Research Foundation Flanders (FWO) for project K801621 N. B. M. R. acknowledges, Prof. Dr. Christophe Detavernier and Dr. Davy Deduystche (COCOON, Ghent University) for PXRD and VT-XRD measurements, Prof. Dr. Christophe Van De Velde (iPRACS, University of Antwerp) and Dr. Radu Ciocarlan (LADCA, University of Antwerp) for helpful discussions on PXRD measurements and Dr. Nick Gys (University of Antwerp and VITO) for ICP-OES measurements. | Approved | Most recent IF: 2.9; 2023 IF: 3.075 | ||
Call Number | UA @ admin @ c:irua:198934 | Serial | 8911 | ||
Permanent link to this record | |||||
Author | Xu, W.; Van Alphen, S.; Galvita, V.V.; Meynen, V.; Bogaerts, A. | ||||
Title | Effect of Gas Composition on Temperature and CO2Conversion in a Gliding Arc Plasmatron reactor: Insights for Post‐Plasma Catalysis from Experiments and Computation | Type | A1 Journal Article | ||
Year ![]() |
2024 | Publication | ChemSusChem | Abbreviated Journal | ChemSusChem |
Volume | Issue | Pages | |||
Keywords | A1 Journal Article; CO2 conversion · Plasma · Gliding arc plasmatron · Temperature profiles · Computational modelling; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
Abstract | Plasma‐based CO<sub>2</sub>conversion has attracted increasing interest. However, to understand the impact of plasma operation on post‐plasma processes, we studied the effect of adding N<sub>2</sub>, N<sub>2</sub>/CH<sub>4</sub>and N<sub>2</sub>/CH<sub>4</sub>/H<sub>2</sub>O to a CO<sub>2</sub>gliding arc plasmatron (GAP) to obtain valuable insights into their impact on exhaust stream composition and temperature, which will serve as feed gas and heat for post‐plasma catalysis (PPC). Adding N<sub>2</sub>improves the CO<sub>2</sub>conversion from 4 % to 13 %, and CH<sub>4</sub>addition further promotes it to 44 %, and even to 61 % at lower gas flow rate (6 L/min), allowing a higher yield of CO and hydrogen for PPC. The addition of H<sub>2</sub>O, however, reduces the CO<sub>2</sub>conversion from 55 % to 22 %, but it also lowers the energy cost, from 5.8 to 3 kJ/L. Regarding the temperature at 4.9 cm post‐plasma, N<sub>2</sub>addition increases the temperature, while the CO<sub>2</sub>/CH<sub>4</sub>ratio has no significant effect on temperature. We also calculated the temperature distribution with computational fluid dynamics simulations. The obtained temperature profiles (both experimental and calculated) show a decreasing trend with distance to the exhaust and provide insights in where to position a PPC bed. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001200297300001 | Publication Date | 2024-04-11 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1864-5631 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 8.4 | Times cited | Open Access | ||
Notes | We acknowledge the VLAIO Catalisti Moonshot project D2M and the VLAIO Catalisti transition project CO2PERATE (HBC.2017.0692) for financial support. We acknowledge Gilles Van Loon for his help to make the quartz and steel devices for the reactor. Vladimir V. Galvita also acknowledges a personal grant from the Research Fund of Ghent University (BOF; 01N16319). | Approved | Most recent IF: 8.4; 2024 IF: 7.226 | ||
Call Number | PLASMANT @ plasmant @c:irua:205101 | Serial | 9128 | ||
Permanent link to this record | |||||
Author | Xu, W.; Buelens, L.C.; Galvita, V.V.; Bogaerts, A.; Meynen, V. | ||||
Title | Improving the performance of gliding arc plasma-catalytic dry reforming via a new post-plasma tubular catalyst bed | Type | A1 Journal Article | ||
Year ![]() |
2024 | Publication | Journal of CO2 Utilization | Abbreviated Journal | Journal of CO2 Utilization |
Volume | 83 | Issue | Pages | 102820 | |
Keywords | A1 Journal Article; Dry reforming Gliding arc plasma Plasma catalytic DRM Ni-based mixed oxide Post-plasma catalysis; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
Abstract | A combination of a gliding arc plasmatron (GAP) reactor and a newly designed tubular catalyst bed (N-bed) was applied to investigate the post-plasma catalytic (PPC) effect for dry reforming of methane (DRM). As comparison, a traditional plasma catalyst bed (T-bed) was also utilized. The post-plasma catalytic effect of a Ni-based mixed oxide (Ni/MO) catalyst with a thermal catalytic performance of 77% CO2 and 86% CH4 conversion at 700 ℃ was studied. Although applying the T-bed had little effect on plasma based CO2 and CH4 conversion, an increase in selectivity to H2 was obtained with a maximum value of 89% at a distance of 2 cm. However, even when only α-Al2O3 packing material was used in the N-bed configuration, compared to the plasma alone and the T-bed, an increase of the CO2 and CH4 conversion from 53% and 53% to 69% and 69% to 83% was achieved. Addition of the Ni/MO catalyst further enhanced the DRM reaction, resulting in conversions of 79% for CO2 and 91% for CH4. Hence, although no insulation nor external heating was applied to the N-bed post plasma, it provides a slightly better conversion than the thermal catalytic performance with the same catalyst, while being fully electrically driven. In addition, an enhanced CO selectivity to 96% was obtained and the energy cost was reduced from ~ 6 kJ/L (plasma alone) to 4.3 kJ/L. To our knowledge, it is the first time that a post-plasma catalytic system achieves this excellent catalytic performance for DRM without extra external heating or insulation. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | Publication Date | 2024-05-25 | ||
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2212-9820 | ISBN | Additional Links | ||
Impact Factor | 7.7 | Times cited | Open Access | ||
Notes | Wencong Xu, Vladimir V. Galvita, Annemie Bogaerts, and Vera Meynen would like to acknowledge the VLAIO Catalisti Moonshot project D2M and the VLAIO Catalisti transition project CO2PERATE (HBC.2017.0692). Lukas C. Buelens acknowledges financial support from the Fund for Scientific Research Flanders (FWO Flanders) through a postdoctoral fellowship grant 12E5623N. Vladimir V. Galvita also acknowledges a personal grant from the Research Fund of Ghent University (BOF; 01N16319). | Approved | Most recent IF: 7.7; 2024 IF: 4.292 | ||
Call Number | PLASMANT @ plasmant @ | Serial | 9131 | ||
Permanent link to this record |