NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	91–120 of 377 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 >>

List View

Citations

Details

	Records
	Author	Yu, H.; Schaekers, M.; Chew, S.A.; Eyeraert, J.-L.; Dabral, A.; Pourtois, G.; Horiguchi, N.; Mocuta, D.; Collaert, N.; De Meyer, K.
	Title	Titanium (germano-)silicides featuring 10^-9 Ω.cm² contact resistivity and improved compatibility to advanced CMOS technology			Type	P1 Proceeding
	Year	2018	Publication	2018 18th International Workshop On Junction Technology (iwjt)	Abbreviated Journal
	Volume		Issue		Pages	80-84 T2 - 18th International Workshop on Junction
	Keywords	P1 Proceeding; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	uIn this work, we discuss three novel Ti (germano-)silicidation techniques featuring respectively the pre-contact amorphization implantation (PCAI), the TiSi co-deposition, and Ti atomic layer deposition (ALD). All three techniques form TiSix(Ge-y) contacts with ultralow contact resistivity (rho(c)) of (1-3)x10(-9) Omega.cm(2) on both highly doped n-Si and p-SiGe substrates: these techniques meet rho(c) requirement of 5-14 nm CMOS technology and feature unified CMOS contact solutions. We further discuss the compatibility of these techniques to the realistic CMOS transistor fabrication.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000502768600020	Publication Date
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	978-1-5386-4511-6; 978-1-5386-4511-6	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:165190			Serial	8673
Permanent link to this record



	Author	Han, M.; Vlaeminck, S.E.; Al-Omari, A.; Wett, B.; Bott, C.; Murthy, S.; De Clippeleir, H.
	Title	Uncoupling the solids retention times of flocs and granules in mainstream deammonification : a screen as effective out-selection tool for nitrite oxidizing bacteria			Type	A1 Journal article
	Year	2016	Publication	Bioresource technology	Abbreviated Journal
	Volume	221	Issue		Pages	195-204
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	This study focused on a physical separator in the form of a screen to out-select nitrite oxidizing bacteria (NOB) for mainstream sewage treatment. This separation relied on the principle that the NOB prefer to grow in flocs, while anammox bacteria (AnAOB) reside in granules. Two types of screens (vacuum and vibrating) were tested for separating these fractions. The vibrating screen was preferred due to more moderate normal forces and additional tangential forces, better balancing retention efficiency of AnAOB granules (41% of the AnAOB activity) and washout of NOB (92% activity washout). This operation resulted in increased NOB out-selection (AerAOB/NOB ratio of 2.3) and a total nitrogen removal efficiency of 70% at influent COD/N ratio of 1.4. An effluent total nitrogen concentration <10 mg N/L was achieved using this novel approach combining biological selection with physical separation, opening up the path towards energy positive sewage treatment. (C) 2016 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000386241000025	Publication Date	2016-09-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0960-8524	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:138157			Serial	8705
Permanent link to this record



	Author	Torfs, K.M.; Van Grieken, R.E.; Buzek, F.
	Title	Use of stable isotope measurements to evaluate the origin of suphur in gypsum layers on limestone buildings			Type	A1 Journal article
	Year	1997	Publication	Environmental science and technology	Abbreviated Journal
	Volume	31	Issue		Pages	2650-2655
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-936x; 1520-5851	ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:18784			Serial	8724
Permanent link to this record



	Author	Verstraete, W.; Clauwaert, P.; Vlaeminck, S.E.
	Title	Used water and nutrients : recovery perspectives in a 'panta rhei' context			Type	A1 Journal article
	Year	2016	Publication	Bioresource technology	Abbreviated Journal
	Volume	215	Issue		Pages	199-208
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	There is an urgent need to secure global supplies in safe water and proteinaceous food in an eco-sustainable manner, as manifested from tensions in the nexus Nutrients-Energy-Water-Environment-Land. This paper is concept based and provides solutions based on resource recovery from municipal and industrial wastewater and from manure. A set of decisive factors is reviewed facilitating an attractive business case. Our key message is that a robust barrier must clear the recovered product from its original status. Besides refined inorganic fertilizers, a central role for five types of microbial protein is proposed. A resource cycling solution for the extremely confined environment of space habitation should serve as an incentive to assimilate a new user mindset. To achieve the ambitious goal of sustainable food security, the solutions suggested here need a broad implementation, hand in hand with minimizing losses along the entire fertilizer-feed-food-fork chain. (C) 2016 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000377935100022	Publication Date	2016-04-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0960-8524	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:134591			Serial	8726
Permanent link to this record



	Author	Vleugels, G.J.; Van Grieken, R.E.
	Title	Weathering of treated and untreated limestones in atmospheric exposures			Type	A3 Journal article
	Year	1991	Publication	Journal of preservation technology	Abbreviated Journal
	Volume	23	Issue		Pages	48-51
	Keywords	A3 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:4320			Serial	8755
Permanent link to this record



	Author	Zhu, W.; Van Tendeloo, M.; De Paepe, J.; Vlaeminck, S.E.
	Title	Comparison of typical nitrite oxidizing bacteria suppression strategies and the effect on nitrous oxide emissions in a biofilm reactor			Type	A1 Journal article
	Year	2023	Publication	Bioresource technology	Abbreviated Journal
	Volume	387	Issue		Pages	129607-129609
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	In mainstream partial nitritation/anammox (PN/A), suppression of nitrite oxidizing bacteria (NOB) and mitigation of N2O emissions are two essential operational goals. The N2O emissions linked to three typical NOB suppression strategies were tested in a covered rotating biological contactor (RBC) biofilm system at 21 degrees C: (i) low dissolved oxygen (DO) concentrations, and treatments with (ii) free ammonia (FA), and (iii) free nitrous acids (FNA). Low emerged DO levels effectively minimized NOB activity and decreased N2O emissions, but NOB adaptation appeared after 200 days of operation. Further NOB suppression was successfully achieved by periodic (3 h per week) treatments with FA (29.3 & PLUSMN; 2.6 mg NH3-N L-1) or FNA (3.1 & PLUSMN; 0.3 mg HNO2-N L-1). FA treatment, however, promoted N2O emissions, while FNA did not affect these. Hence, biofilm PN/A should be operated at relatively low DO levels with periodic FNA treatment to maximize nitrogen removal efficiency while avoiding high greenhouse gas emissions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001063180200001	Publication Date	2023-08-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0960-8524	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	11.4	Times cited		Open Access	Not_Open_Access: Available from 21.02.2024
	Notes				Approved	Most recent IF: 11.4; 2023 IF: 5.651
	Call Number	UA @ admin @ c:irua:199051			Serial	8843
Permanent link to this record



	Author	Zhu, W.; Van Tendeloo, M.; Alloul, A.; Vlaeminck, S.E.
	Title	Feasibility of a return-sludge nursery concept for mainstream anammox biostimulation : creating optimal conditions for anammox to recover and grow in a parallel tank			Type	A1 Journal article
	Year	2023	Publication	Bioresource technology	Abbreviated Journal
	Volume	385	Issue		Pages	129359-12
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	To overcome limiting anammox activity under sewage treatment conditions, a return-sludge nursery concept is proposed. This concept involves blending sludge reject water treated with partial nitritation with mainstream effluent to increase the temperature, N levels, and electrical conductivity (EC) of the anammox nursery reactor, which sludge periodically passes through the return sludge line of the mainstream system. Various nursery frequencies were tested in two 2.5 L reactors, including 0.5-2 days of nursery treatment per 3.5-14 days of the total operation. Bioreactor experiments showed that nursery increased nitrogen removal rates during mainstream operation by 33-38%. The increased anammox activity can be partly (35-60%) explained by higher temperatures. Elevated EC, higher nitrogen concentrations, and a putative synergy and/or unknown factor were responsible for 15-16%, 12-14%, and 10-36%, respectively. A relatively stable microbial community was observed, dominated by a “Candidatus Brocadia” member. This new concept boosted activity and sludge growth, which may facilitate mainstream anammox implementations based on partial nitritation/anammox or partial nitrification/denitratation/anammox.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001031586400001	Publication Date	2023-06-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0960-8524	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	11.4	Times cited		Open Access	Not_Open_Access
	Notes				Approved	Most recent IF: 11.4; 2023 IF: 5.651
	Call Number	UA @ admin @ c:irua:198259			Serial	8866
Permanent link to this record



	Author	Alloul, A.; Moradvandi, A.; Puyol, D.; Molina, R.; Gardella, G.; Vlaeminck, S.E.; De Schutter, B.; Abraham, E.; Lindeboom, R.E.F.; Weissbrodt, D.G.
	Title	A novel mechanistic modelling approach for microbial selection dynamics : towards improved design and control of raceway reactors for purple bacteria			Type	A1 Journal article
	Year	2023	Publication	Bioresource technology	Abbreviated Journal
	Volume	390	Issue		Pages	129844-129849
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Purple phototrophic bacteria (PPB) show an underexplored potential for resource recovery from wastewater. Raceway reactors offer a more affordable full-scale solution on wastewater and enable useful additional aerobic processes. Current mathematical models of PPB systems provide useful mechanistic insights, but do not represent the full metabolic versatility of PPB and thus require further advancement to simulate the process for technology development and control. In this study, a new modelling approach for PPB that integrates the photoheterotrophic, and both anaerobic and aerobic chemoheterotrophic metabolic pathways through an empirical parallel metabolic growth constant was proposed. It aimed the modelling of microbial selection dynamics in competition with aerobic and anaerobic microbial community under different operational scenarios. A sensitivity analysis was carried out to identify the most influential parameters within the model and calibrate them based on experimental data. Process perturbation scenarios were simulated, which showed a good performance of the model.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001094606700001	Publication Date	2023-10-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0960-8524	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	11.4	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 11.4; 2023 IF: 5.651
	Call Number	UA @ admin @ c:irua:200035			Serial	8905
Permanent link to this record



	Author	Pankratova, G.; Bollella, P.; Pankratov, D.; Gorton, L.
	Title	Supercapacitive biofuel cells			Type	A1 Journal article
	Year	2022	Publication	Current opinion in biotechnology	Abbreviated Journal
	Volume	73	Issue		Pages	179-187
	Keywords	A1 Journal article; Engineering sciences. Technology; Antwerp Electrochemical and Analytical Sciences Lab (A-Sense Lab)
	Abstract	Supercapacitive biofuel cells' (SBFCs) most recent advancements are herein disclosed. In conventional SBFCs the biocomponent is employed as the pseudocapacitive component, while in self-charging biodevices it also works as the biocatalyst. The performance of different types of SBFCs are summarized according to the categorization based on the biocatalyst employed: supercapacitive microbial fuel cells (sMFCs), supercapacitive biophotovoltaics (SBPV) and supercapacitive enzymatic fuel cells (s-EFCs). SBFCs could be considered as promising 'alternative' energy devices (low-cost, environmentally friendly, and technically undemanding electric power sources etc.) being suitable for powering a new generation of miniaturized electronic applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000760339100024	Publication Date	2021-09-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0958-1669	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access	OpenAccess
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:187287			Serial	8937
Permanent link to this record



	Author	Reyntjens, P.; Van de Put, M.; Vandenberghe, W.G.; Sorée, B.
	Title	Ultrascaled graphene-capped interconnects : a quantum mechanical study			Type	P1 Proceeding
	Year	2023	Publication	Proceedings of the IEEE ... International Interconnect Technology Conference T2 – IEEE International Interconnect Technology Conference (IITC) / IEEE, Materials for Advanced Metallization Conference (MAM), MAY 22-25, 2023, Dresden, Germany	Abbreviated Journal
	Volume		Issue		Pages	1-3
	Keywords	P1 Proceeding; Condensed Matter Theory (CMT)
	Abstract	In this theoretical study, we assess the impact of a graphene capping layer on the resistivity of defective, extremely scaled interconnects. We investigate the effect of graphene capping on the electronic transport in ultrascaled interconnects, in the presence of grain boundary defects in the metal layer. We compare the results obtained using our quantum mechanical model to a simple parallel-conductor model and find that the parallel-conductor model does not capture the effect of the graphene cap correctly. At 0.5 nm metal thickness, the parallel-conductor model underestimates the conductivity by 3.0% to 4.0% for single-sided and double sided graphene capping, respectively.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001027381700006	Publication Date	2023-06-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	979-83-503-1097-9	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access	Not_Open_Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:198343			Serial	8949
Permanent link to this record



	Author	Zhou, S.; Zhang, C.; Xu, W.; Zhang, J.; Xiao, Y.; Ding, L.; Wen, H.; Cheng, X.; Hu, C.; Li, H.; Li, X.; Peeters, F.M.
	Title	Observation of temperature induced phase transitions in TiO superconducting thin film via infrared measurement			Type	A1 Journal article
	Year	2024	Publication	Infrared physics and technology	Abbreviated Journal
	Volume	137	Issue		Pages	105160-105169
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	In contrast to conventional polycrystalline titanium oxide (TiO), it was found recently that the superconducting transition temperature Tc can be significantly enhanced from about 2 K to 7.4 K in cubic TiO thin films grown epitaxially on alpha-Al2O3 substrates. This kind of TiO film is also expected to have distinctive optoelectronic properties, which are still not very clear up to now. Herein, by using infrared (IR) reflection measurement we investigate the temperature-dependent optoelectronic response of a cubic TiO thin film, in which temperature induced phase transitions are observed. The semiconductor-, metallic- and semiconductor-like electronic phases of this superconducting film are found in the temperature regimes from 10 to 110 K, 110 to 220 K and above 220 K, respectively. The results obtained optically are consistent with those measured by transport experiment. Furthermore, based on an improved reflection model developed here, we extract the complex optical conductivity of the cubic TiO thin film. We are able to approximately determine the characteristic parameters (e.g., effective electron mass, carrier density, scattering time, etc.) for different electronic phases by fitting the optical conductivity with the modified Lorentz formula. These results not only deepen our understanding of the fundamental physics for cubic TiO thin films but also may find applications in optoelectronic devices based on superconductors.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001170490200001	Publication Date	2024-01-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1350-4495	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	3.3	Times cited		Open Access
	Notes				Approved	Most recent IF: 3.3; 2024 IF: 1.713
	Call Number	UA @ admin @ c:irua:204853			Serial	9162
Permanent link to this record



	Author	Xiao, H.; Wen, H.; Xu, W.; Cheng, Y.; Zhang, J.; Cheng, X.; Xiao, Y.; Ding, L.; Li, H.; He, B.; Peeters, F.M.
	Title	Terahertz magneto-optical properties of Nitrogen-doped diamond			Type	A1 Journal article
	Year	2024	Publication	Infrared physics and technology	Abbreviated Journal
	Volume	138	Issue		Pages	105237-105239
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Nitrogen-doped diamond (N-D) is one of the most important carbon-based electronic and optical materials. Here we study the terahertz (THz) magneto-optical (MO) properties of N-D grown by microwave plasma-enhanced chemical vapor deposition. The optical microscope, SEM, XRD, Raman spectrum, FTIR spectroscopy and XPS are used for the characterization of N-D samples. Applying THz time-domain spectroscopy (TDS), in combination with the polarization test and the presence of magnetic field in Faraday geometry, THz MO transmissions through N-D are measured from 0 to 8 T at 80 K. The complex right- and left-handed circular transmission coefficients and MO conductivities for N-D are obtained accordingly. Through fitting the experimental results with theoretical formulas of the dielectric constant and MO conductivities for an electron gas, we are able to determine magneto-optically the key electronic parameters of N-D, such as the static dielectric constant epsilon b, the electron density ne, the electronic relaxation time tau, the electronic localization factor alpha and, particularly, the effective electron mass m* obtained under non-resonant condition. The dependence of these parameters upon magnetic field is examined and analyzed. We find that the MO conductivities of N-D can be described rightly by the MO Drude-Smith formulas developed by us previously. It is shown that N-doping and the presence of the magnetic field can lead towards the larger epsilon b and heavier m* in diamond, while ne/tau/alpha in N-D decreases/increases/decreases with increasing magnetic field. The results obtained from this work are benefit to us in gaining an in-depth understanding of the electronic and optoelectronic properties of N-D.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001200173100001	Publication Date	2024-02-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1350-4495	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	3.3	Times cited		Open Access
	Notes				Approved	Most recent IF: 3.3; 2024 IF: 1.713
	Call Number	UA @ admin @ c:irua:205523			Serial	9178
Permanent link to this record



	Author	Ke, X.; Bittencourt, C.; Bals, S.; Van Tendeloo, G.
	Title	Low-dose patterning of platinum nanoclusters on carbon nanotubes by focused-electron-beam-induced deposition as studied by TEM			Type	A1 Journal article
	Year	2013	Publication	Beilstein journal of nanotechnology	Abbreviated Journal	Beilstein J Nanotech
	Volume	4	Issue		Pages	77-86
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Focused-electron-beam-induced deposition (FEBID) is used as a direct-write approach to decorate ultrasmall Pt nanoclusters on carbon nanotubes at selected sites in a straightforward maskless manner. The as-deposited nanostructures are studied by transmission electron microscopy (TEM) in 2D and 3D, demonstrating that the Pt nanoclusters are well-dispersed, covering the selected areas of the CNT surface completely. The ability of FEBID to graft nanoclusters on multiple sides, through an electron-transparent target within one step, is unique as a physical deposition method. Using high-resolution TEM we have shown that the CNT structure can be well preserved thanks to the low dose used in FEBID. By tuning the electron-beam parameters, the density and distribution of the nanoclusters can be controlled. The purity of as-deposited nanoclusters can be improved by low-energy electron irradiation at room temperature.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000314499700001	Publication Date	2013-02-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2190-4286;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.127	Times cited	12	Open Access
	Notes	262348 ESMI; 246791 COUNTATOMS; FWO G002410N; ESF Cost Action NanoTP MP0901			Approved	Most recent IF: 3.127; 2013 IF: 2.332
	Call Number	UA @ lucian @ c:irua:106187			Serial	1848
Permanent link to this record



	Author	Lamas, J.S.; Leroy, W.P.; Lu, Y.-G.; Verbeeck, J.; Van Tendeloo, G.; Depla, D.
	Title	Using the macroscopic scale to predict the nano-scale behavior of YSZ thin films			Type	A1 Journal article
	Year	2014	Publication	Surface and coatings technology	Abbreviated Journal	Surf Coat Tech
	Volume	238	Issue		Pages	45-50
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	In this work, Yttria-stabilized zirconia (YSZ) thin films were deposited using dual reactive magnetron sputtering. By varying the deposition conditions, the film morphology and texture of the thin films are tuned and biaxial alignment is obtained. Studying the crystallographic and microstructural properties of the YSZ thin films, a tilted columnar growth was identified. This tilt is shown to be dependent on the compositional gradient of the sample. The variation of composition within a single YSZ column measured via STEM-EDX is demonstrated to be equal to the macroscopic variation on a full YSZ sample when deposited under the same deposition parameters. A simple stress model was developed to predict the tilt of the growing columns. The results indicate that this model not only determines the column bending of the growing film but also confirms that a macroscopic approach is sufficient to determine the compositional gradient in a single column of the YSZ thin films. (C) 2013 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000331028200005	Publication Date	2013-10-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0257-8972;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.589	Times cited	8	Open Access
	Notes	246791 Countatoms; 278510 Vortex;Nmp3-La-2010-246102 Ifox; 312483 Esteem2; esteem2jra3 ECASJO;			Approved	Most recent IF: 2.589; 2014 IF: 1.998
	Call Number	UA @ lucian @ c:irua:115765			Serial	3827
Permanent link to this record



	Author	Prabhakara, V.; Jannis, D.; Béché, A.; Bender, H.; Verbeeck, J.
	Title	Strain measurement in semiconductor FinFET devices using a novel moiré demodulation technique			Type	A1 Journal article
	Year	2019	Publication	Semiconductor science and technology	Abbreviated Journal	Semicond Sci Tech
	Volume		Issue		Pages
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Moiré fringes are used throughout a wide variety of applications in physics and engineering to bring out small variations in an underlying lattice by comparing with another reference lattice. This method was recently demonstrated in Scanning Transmission Electron Microscopy imaging to provide local strain measurement in crystals by comparing the crystal lattice with the scanning raster that then serves as the reference. The images obtained in this way contain a beating fringe pattern with a local period that represents the deviation of the lattice from the reference. In order to obtain the actual strain value, a region containing a full period of the fringe is required, which results in a compromise between strain sensitivity and spatial resolution. In this paper we propose an advanced setup making use of an optimised scanning pattern and a novel phase stepping demodulation scheme. We demonstrate the novel method on a series of 16 nm Si-Ge semiconductor FinFET devices in which strain plays a crucial role in modulating the charge carrier mobility. The obtained results are compared with both Nano-beam diffraction and the recently proposed Bessel beam diffraction technique. The setup provides a much improved spatial resolution over conventional moiré imaging in STEM while at the same time being fast and requiring no specialised diffraction camera as opposed to the diffraction techniques we compare to.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000537721200002	Publication Date	2019-11-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0268-1242	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.305	Times cited	8	Open Access
	Notes	The Qu-Ant-EM microscope and the direct electron detector used in the diffraction experiments was partly funded by the Hercules fund from the Flemish Government. This project has received funding from the GOA project “Solarpaint” of the University of Antwerp. We would also like to thank Dr. Thomas Nuytten and Prof. Dr. Wilfried Vandervorst from IMEC, Leuven for their continuous support and collaboration with the project.			Approved	Most recent IF: 2.305
	Call Number	EMAT @ emat @c:irua:165794			Serial	5445
Permanent link to this record



	Author	Spanoghe, J.; Grunert, O.; Wambacq, E.; Sakarika, M.; Papini, G.; Alloul, A.; Spiller, M.; Derycke, V.; Stragier, L.; Verstraete, H.; Fauconnier, K.; Verstraete, W.; Haesaert, G.; Vlaeminck, S.E.
	Title	Storage, fertilization and cost properties highlight the potential of dried microbial biomass as organic fertilizer			Type	A1 Journal article
	Year	2020	Publication	Microbial biotechnology	Abbreviated Journal	Microb. Biotechnol.
	Volume		Issue		Pages	1-13
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The transition to sustainable agriculture and horticulture is a societal challenge of global importance. Fertilization with a minimum impact on the environment can facilitate this. Organic fertilizers can play an important role, given their typical release pattern and production through resource recovery. Microbial fertilizers (MFs) constitute an emerging class of organic fertilizers and consist of dried microbial biomass, for instance produced on effluents from the food and beverage industry. In this study, three groups of organisms were tested as MFs: a high-rate consortium aerobic bacteria (CAB), the microalga Arthrospira platensis (‘Spirulina’) and a purple non-sulfur bacterium (PNSB) Rhodobacter sp. During storage as dry products, the MFs showed light hygroscopic activity, but the mineral and organic fractions remained stable over a storage period of 91 days. For biological tests, a reference organic fertilizer (ROF) was used as positive control, and a commercial organic growing medium (GM) as substrate. The mineralization patterns without and with plants were similar for all MFs and ROF, with more than 70% of the organic nitrogen mineralized in 77 days. In a first fertilization trial with parsley, all MFs showed equal performance compared to ROF, and the plant fresh weight was even higher with CAB fertilization. CAB was subsequently used in a follow-up trial with petunia and resulted in elevated plant height, comparable chlorophyll content and a higher amount of flowers compared to ROF. Finally, a cost estimation for packed GM with supplemented fertilizer indicated that CAB and a blend of CAB/PNSB (85%/15%) were most cost competitive, with an increase of 6% and 7% in cost compared to ROF. In conclusion, as biobased fertilizers, MFs have the potential to contribute to sustainable plant nutrition, performing as good as a commercially available organic fertilizer, and to a circular economy.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000563539700001	Publication Date	2020-03-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1751-7915	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.7	Times cited		Open Access
	Notes	The authors would like to kindly acknowledge (i) the MIP i‐Cleantech Flanders (Milieu‐innovatieplatform; Environment innovation platform) project Microbial Nutrients on Demand (MicroNOD) for financial support, (ii) the DOCPRO4 project ‘PurpleTech’, funded by the BOF (Bijzonder onderzoeksfonds; Special research fund) from the University of Antwerp for financially supporting J.S., (iii) all MicroNOD partners, including the University of Antwerp, Ghent University, AgrAqua, Greenyard Horticulture and Avecom; and (iv) all steering committee members, including Greenyard Frozen, Agristo, AVBS, Vlakwa, het Innovatiesteunpunt, VCM and OVAM.			Approved	Most recent IF: 5.7; 2020 IF: NA
	Call Number	DuEL @ duel @c:irua:167595			Serial	6357
Permanent link to this record



	Author	Lumbeeck, G.; Delvaux, A.; Idrissi, H.; Proost, J.; Schryvers, D.
	Title	Analysis of internal stress build-up during deposition of nanocrystalline Ni thin films using transmission electron microscopy			Type	A1 Journal article
	Year	2020	Publication	Thin solid films : an international journal on the science and technology of thin and thick films	Abbreviated Journal	Thin Solid Films
	Volume	707	Issue		Pages	138076
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Ni thin films sputter-deposited at room temperature with varying Ar pressures were investigated with automated crystal orientation mapping in a transmission electron microscope to uncover the mechanisms controlling the internal stress build-up recorded in-situ during deposition. Large grains were found to induce behaviour similar to a stress-free nucleation layer. The measurements of grain size in most of the Ni thin films are in agreement with the island coalescence model. Low internal stress was observed at low Ar pressure and was explained by the presence of large grains. Relaxation of high internal stress was also noticed at the highest Ar pressure, which was attributed to a decrease of Σ3 twin boundary density due to a low deposition rate. The results provide insightful information to better understand the relationship between structural boundaries and the evolution of internal stress upon deposition of thin films.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000539312200011	Publication Date	2020-05-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access	OpenAccess
	Notes	This work was supported by the Hercules Foundation [Grant No. AUHA13009], the Flemish Research Fund (FWO) [Grant No. G.0365.15N], and the Flemish Strategic Initiative for Materials (SIM) under the project InterPoCo. Thin film deposition has been realised as part of the WallonHY project, funded by the Public Service of Wallonia – Department of Energy and Sustainable Building. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS).			Approved	Most recent IF: NA
	Call Number	EMAT @ emat @c:irua:169708			Serial	6370
Permanent link to this record



	Author	Ding, L.; Zhao, M.; Ehlers, F.J.H.; Jia, Z.; Zhang, Z.; Weng, Y.; Schryvers, D.; Liu, Q.; Idrissi, H.
	Title	“Branched” structural transformation of the L12-Al3Zr phase manipulated by Cu substitution/segregation in the Al-Cu-Zr alloy system			Type	A1 Journal article
	Year	2024	Publication	Journal of materials science & technology	Abbreviated Journal	Journal of Materials Science & Technology
	Volume	185	Issue		Pages	186-206
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The effect of Cu on the evolution of the Al3Zr phase in an Al-Cu-Zr cast alloy during solution treatment at 500 °C has been thoroughly studied by combining atomic resolution high-angle annular dark-field scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy and first-principles cal- culations. The heat treatment initially produces a pure L12-Al3Zr microstructure, allowing for about 13 % Cu to be incorporated in the dispersoid. Cu incorporation increases the energy barrier for anti-phase boundary (APB) activation, thus stabilizing the L12 structure. Additional heating leads to a Cu-induced “branched”path for the L12 structural transformation, with the latter process accelerated once the first APB has been created. Cu atoms may either (i) be repelled by the APBs, promoting the transformation to a Cu-poor D023 phase, or (ii) they may segregate at one Al-Zr layer adjacent to the APB, promoting a transformation to a new thermodynamically favored phase, Al4CuZr, formed when these segregation layers are periodically arranged. Theoretical studies suggest that the branching of the L12 transformation path is linked to the speed at which an APB is created, with Cu attraction triggered by a comparatively slow process. This unexpected transformation behavior of the L12-Al3Zr phase opens a new path to understanding, and potentially regulating the Al3Zr dispersoid evolution for high temperature applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001154261100001	Publication Date	2023-12-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1005-0302	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	10.9	Times cited		Open Access	Not_Open_Access
	Notes	This work was supported by the National Key Research and Development Program (No. 2020YFA0405900), the National Natural Science Foundation of China (Grant No. 52371111 and U2141215 ), the Natural Science Foundation of Jiangsu Province (No. BE2022159 ). We are grateful to the High Performance Computing Center of Nanjing Tech University for supporting the computational resources. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR- FNRS).			Approved	Most recent IF: 10.9; 2024 IF: 2.764
	Call Number	EMAT @ emat @c:irua:202392			Serial	8981
Permanent link to this record



	Author	Bogaerts, A.; Neyts, E.C.; Guaitella, O.; Murphy, A.B.
	Title	Foundations of plasma catalysis for environmental applications			Type	A1 Journal article
	Year	2022	Publication	Plasma Sources Science & Technology	Abbreviated Journal	Plasma Sources Sci T
	Volume		Issue		Pages
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Plasma catalysis is gaining increasing interest for various applications, but the underlying mechanisms are still far from understood. Hence, more fundamental research is needed to understand these mechanisms. This can be obtained by both modelling and experiments. This foundations paper describes the fundamental insights in plasma catalysis, as well as efforts to gain more insights by modelling and experiments. Furthermore, it discusses the state-of-the-art of the major plasma catalysis applications, as well as successes and challenges of technology transfer of these applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000804396200001	Publication Date	2022-03-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.8	Times cited		Open Access	OpenAccess
	Notes	H2020 Marie Skłodowska-Curie Actions, 823745 ; H2020 European Research Council, 810182 ; We acknowldege financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation programme (Grant Agreement No. 810182 – SCOPE ERC Synergy project) and the European Union’s Horizon 2020 Research and Innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 813393 (PIONEER).			Approved	Most recent IF: 3.8
	Call Number	PLASMANT @ plasmant @c:irua:188539			Serial	7070
Permanent link to this record



	Author	de la Croix, T.; Claes, N.; Eyley, S.; Thielemans, W.; Bals, S.; De Vos, D.
	Title	Heterogeneous Pt-catalyzed transfer dehydrogenation of long-chain alkanes with ethylene			Type	A1 Journal Article
	Year	2023	Publication	Catalysis Science & Technology	Abbreviated Journal	Catal. Sci. Technol.
	Volume		Issue		Pages
	Keywords	A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ;
	Abstract	The dehydrogenation of long-chain alkanes to olefins and alkylaromatics is a challenging endothermic reaction, typically requiring harsh conditions which can lead to low selectivity and coking. More favorable thermodynamics can be achieved by using a hydrogen acceptor, such as ethylene. In this work, the potential of heterogeneous platinum catalysts for the transfer dehydrogenation of long-chain alkanes is investigated, using ethylene as a convenient hydrogen acceptor. Pt/C and Pt–Sn/C catalysts were prepared<italic>via</italic>a simple polyol method and characterized with CO pulse chemisorption, HAADF-STEM, and EDX measurements. Conversion of ethylene was monitored<italic>via</italic>gas-phase FTIR, and distribution of liquid products was analyzed<italic>via</italic>GC-FID, GC-MS, and 1H-NMR. Compared to unpromoted Pt/C, Sn-promoted catalysts show lower initial reaction rates, but better resistance to catalyst deactivation, while increasing selectivity towards alkylaromatics. Both reaction products and ethylene were found to inhibit the reaction significantly. At 250 °C for 22 h, TON up to 28 and 86 mol per mol Pt were obtained for Pt/C and PtSn<sub>2</sub>/C, respectively, with olefin selectivities of 94% and 53%. The remaining products were mainly unbranched alkylaromatics. These findings show the potential of simple heterogeneous catalysts in alkane transfer dehydrogenation, for the preparation of valuable olefins and alkylaromatics, or as an essential step in various tandem reactions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001104905100001	Publication Date	2023-11-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2044-4753	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	5	Times cited		Open Access	OpenAccess
	Notes	T. de la Croix gratefully acknowledges the support of the Flanders Research Foundation (FWO) under project 11F6622N. D. De Vos is grateful to FWO for support of project G0D3721N, and to KU Leuven for the iBOF project 21/016/C3. S. Bals and N. Claes acknowledge funding from the European Research Council under the European Union’s Horizon 2020 research and innovation program (ERC Consolidator Grant No. 815128- REALNANO). W. Thielemans and S. Eyley thank KU Leuven (grant C14/18/061) and FWO (G0A1219N) for financial support.			Approved	Most recent IF: 5; 2023 IF: 5.773
	Call Number	EMAT @ emat @c:irua:201010			Serial	8968
Permanent link to this record



	Author	Schryvers, D.; Cao, S.; Tirry, W.; Idrissi, H.; Van Aert, S.
	Title	Advanced three-dimensional electron microscopy techniques in the quest for better structural and functional materials			Type	A1 Journal article
	Year	2013	Publication	Science and technology of advanced materials	Abbreviated Journal	Sci Technol Adv Mat
	Volume	14	Issue	1	Pages	014206-14213
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	After a short review of electron tomography techniques for materials science, this overview will cover some recent results on different shape memory and nanostructured metallic systems obtained by various three-dimensional (3D) electron imaging techniques. In binary NiTi, the 3D morphology and distribution of Ni4Ti3 precipitates are investigated by using FIB/SEM slice-and-view yielding 3D data stacks. Different quantification techniques will be presented including the principal ellipsoid for a given precipitate, shape classification following a Zingg scheme, particle distribution function, distance transform and water penetration. The latter is a novel approach to quantifying the expected matrix transformation in between the precipitates. The different samples investigated include a single crystal annealed with and without compression yielding layered and autocatalytic precipitation, respectively, and a polycrystal revealing different densities and sizes of the precipitates resulting in a multistage transformation process. Electron tomography was used to understand the interaction between focused ion beam-induced Frank loops and long dislocation structures in nanobeams of Al exhibiting special mechanical behaviour measured by on-chip deposition. Atomic resolution electron tomography is demonstrated on Ag nanoparticles in an Al matrix.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Sendai	Editor
	Language		Wos	000316463800008	Publication Date	2013-03-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1468-6996;1878-5514;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.798	Times cited	6	Open Access
	Notes	Fwo; Iap; Esteem			Approved	Most recent IF: 3.798; 2013 IF: 2.613
	Call Number	UA @ lucian @ c:irua:107343			Serial	77
Permanent link to this record



	Author	Tinck, S.; Bogaerts, A.
	Title	Computer simulations of an oxygen inductively coupled plasma used for plasma-assisted atomic layer deposition			Type	A1 Journal article
	Year	2011	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	20	Issue	1	Pages	015008-015008,10
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, an O2 inductively coupled plasma used for plasma enhanced atomic layer deposition of Al2O3 thin films is investigated by means of modeling. This work intends to provide more information about basic plasma properties such as species densities and species fluxes to the substrate as a function of power and pressure, which might be hard to measure experimentally. For this purpose, a hybrid model developed by Kushner et al is applied to calculate the plasma characteristics in the reactor volume for different chamber pressures ranging from 1 to 10 mTorr and different coil powers ranging from 50 to 500 W. Density profiles of the various oxygen containing plasma species are reported as well as fluxes to the substrate under various operating conditions. Furthermore, different orientations of the substrate, which can be placed vertically or horizontally in the reactor, are taken into account. In addition, special attention is paid to the recombination process of atomic oxygen on the different reactor walls under the stated operating conditions. From this work it can be concluded that the plasma properties change significantly in different locations of the reactor. The plasma density near the cylindrical coil is high, while it is almost negligible in the neighborhood of the substrate. Ion and excited species fluxes to the substrate are found to be very low and negligible. Finally, the orientation of the substrate has a minor effect on the flux of O2, while it has a significant effect on the flux of O. In the horizontal configuration, the flux of atomic oxygen can be up to one order of magnitude lower than in the vertical configuration.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000286592200009	Publication Date	2011-01-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.302; 2011 IF: 2.521
	Call Number	UA @ lucian @ c:irua:85285			Serial	467
Permanent link to this record



	Author	Tao, X.Y.; Zhang, X.B.; Cheng, J.-P.; Liu, F.; Li, Y.; Van Tendeloo, G.
	Title	Controllable synthesis of novel one-dimensional carbon nanomaterials on an alkali-element-modified Cu catalyst			Type	A1 Journal article
	Year	2006	Publication	Nanotechnology	Abbreviated Journal	Nanotechnology
	Volume	17	Issue	1	Pages	224-226
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000234959200039	Publication Date	2005-12-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0957-4484;1361-6528;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.44	Times cited	4	Open Access
	Notes				Approved	Most recent IF: 3.44; 2006 IF: 3.037
	Call Number	UA @ lucian @ c:irua:56629			Serial	501
Permanent link to this record



	Author	Mihailescu, I.N.; Gyorgy, E.; Marin, G.; Popescu, M.; Teodorescu, V.S.; van Landuyt, J.; Grivas, C.; Hatziapostolou, A.
	Title	Crystalline structure of very hard tungsten carbide thin films obtained by reactive pulsed laser deposition			Type	A1 Journal article
	Year	1999	Publication	Journal of vacuum science and technology: A: vacuum surfaces and films	Abbreviated Journal	J Vac Sci Technol A
	Volume	17	Issue	1	Pages	249-255
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000078136300038	Publication Date	2002-07-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0734-2101;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.374	Times cited	8	Open Access
	Notes				Approved	Most recent IF: 1.374; 1999 IF: 1.742
	Call Number	UA @ lucian @ c:irua:29689			Serial	581
Permanent link to this record



	Author	Zhao, S.-X.; Gao, F.; Wang, Y.-N.; Bogaerts, A.
	Title	Gas ratio effects on the Si etch rate and profile uniformity in an inductively coupled Ar/CF₄ plasma			Type	A1 Journal article
	Year	2013	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	22	Issue	1	Pages	015017-15018
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this work, a hybrid model is used to investigate the effect of different gas ratios on the Si etching and polymer film deposition characteristics in an Ar/CF4 inductively coupled plasma. The influence of the surface processes on the bulk plasma properties is studied, and also the spatial characteristics of important gas phase and etched species. The densities of F and CF2 decrease when the surface module is included in the simulations, due to the species consumption caused by etching and polymer deposition. The influence of the surface processes on the bulk plasma depends on the Ar/CF4 gas ratio. The deposited polymer becomes thicker at high CF4 content because of more abundant CFx radicals. As a result of the competition between the polymer thickness and the F flux, the etch rate first increases and then decreases upon increasing the CF4 content. The electron properties, more specifically the electron density profile, affect the Si etch characteristics substantially by determining the radical density and flux profiles. In fact, the radial profile of the etch rate is more uniform at low CF4 content since the electron density has a smooth distribution. At high CF4 content, the etch rate is less uniform with a minimum halfway along the wafer radius, because the electron density distribution is more localized. Therefore, our calculations predict that it is better to work at relatively high Ar/CF4 gas ratios, in order to obtain high etch rate and good profile uniformity for etch applications. This, in fact, corresponds to the typical experimental etch conditions in Ar/CF4 gas mixtures as found in the literature, where Ar is typically present at a much higher concentration than CF4.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000314966300022	Publication Date	2012-12-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.302; 2013 IF: 3.056
	Call Number	UA @ lucian @ c:irua:102583			Serial	1320
Permanent link to this record



	Author	Orlinskii, S.B.; Bogomolov, R.S.; Kiyamova, A.M.; Yavkin, B.V.; Mamin, G.M.; Turner, S.; Van Tendeloo, G.; Shiryaev, A.A.; Vlasov, I.I.; Shenderova, O.
	Title	Identification of substitutional nitrogen and surface paramagnetic centers in nanodiamond of dynamic synthesis by electron paramagnetic resonance			Type	A1 Journal article
	Year	2011	Publication	Nanoscience and nanotechnology letters	Abbreviated Journal	Nanosci Nanotech Let
	Volume	3	Issue	1	Pages	63-67
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Production of nanodiamond particles containing substitutional nitrogen is important for a wide variety of advanced applications. In the current work nanodiamond particles synthesized from a mixture of graphite and hexogen were analyzed to determine the presence of substitutional nitrogen using pulsed electron paramagnetic resonance (EPR) spectroscopy. Nitrogen paramagnetic centers in the amount of 1.2 ppm have been identified. The spin relaxation characteristics for both nitrogen and surface defects are also reported. A new approach for efficient depletion of the strong non-nitrogen EPR signal in nanodiamond material by immersing nanodiamond particles into ice matrix is suggested. This approach allows an essential decrease of the spin relaxation time of the dominant non-nitrogen defects, while preserving the substitutional nitrogen spin relaxation time.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000293211200012	Publication Date	2011-09-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1941-4900;1941-4919;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.889	Times cited	14	Open Access
	Notes				Approved	Most recent IF: 1.889; 2011 IF: 0.528
	Call Number	UA @ lucian @ c:irua:91943			Serial	1548
Permanent link to this record



	Author	Monot, I.; Tancret, F.; Laffez, P.; Van Tendeloo, G.; Desgardin, G.
	Title	Microstructure and properties of oxygen controlled melt textured NdBaCuO superconductive ceramics			Type	A1 Journal article
	Year	1999	Publication	Technology	Abbreviated Journal	Mater Sci Eng B-Adv
	Volume	65	Issue	1	Pages	26-34
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Nd1+xBa2-xCu3O7-delta (123) bulk superconductors have been synthesised by the oxygen controlled melt growth method. Unlike the YBaCuO system, platinum doping or Nd4Ba2Cu2O10 (422) rich compositions do not refine the peritectic '422' secondary phase, but the latter improves the microstructural quality. Low oxygen partial pressure and high purity precursors are necessary to achieve in a reproducible manner high T-c and J(c) (up to 56 000 A/cm(2) in 0T and 30 000 A/cm(2) under 1.5T). The fishtail effect observed at 77 K is compared with the one observed in the YBCO system, and is discussed in terms of oxygen deficiency, Nd-Ba substitution, defects and vortex lattice. Our TEM observations did not evidence any Nd-Ba substituted clusters in the Nd123 matrix; however, some diffuse streaks, observed in the [100] zone ED pattern, support the fact that the source of the peak effect in this system is mainly due to oxygen disorder and low stability of the orthorhombic phase. (C) 1999 Elsevier Science S.A. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000083432000005	Publication Date	2002-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-5107;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.552	Times cited	5	Open Access
	Notes				Approved	Most recent IF: 2.552; 1999 IF: 0.690
	Call Number	UA @ lucian @ c:irua:104286			Serial	2060
Permanent link to this record



	Author	Cheng, J.P.; Zhang, X.B.; Ye, Y.; Tao, X.Y.; Liu, F.; Li, Y.; Van Tendeloo, G.
	Title	Natural mineral-marine manganese nodule as a novel catalyst for the synthesis of carbon nanotubes			Type	A1 Journal article
	Year	2006	Publication	Journal of Wuhan University of Technology: materials science edition	Abbreviated Journal
	Volume	21	Issue	1	Pages	29-31
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:57740			Serial	2286
Permanent link to this record



	Author	Kolev, I.; Bogaerts, A.
	Title	Numerical study of the sputtering in a dc magnetron			Type	A1 Journal article
	Year	2009	Publication	Journal of vacuum science and technology: A: vacuum surfaces and films	Abbreviated Journal	J Phys Chem C
	Volume	27	Issue	1	Pages	20-28
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Molecular dynamics simulations were used to investigate the size-dependent melting mechanism of nickel nanoclusters of various sizes. The melting process was monitored by the caloric curve, the overall cluster Lindemann index, and the atomic Lindemann index. Size-dependent melting temperatures were determined, and the correct linear dependence on inverse diameter was recovered. We found that the melting mechanism gradually changes from dynamic coexistence melting to surface melting with increasing cluster size. These findings are of importance in better understanding carbon nanotube growth by catalytic chemical vapor deposition as the phase state of the catalyst nanoparticle codetermines the growth mechanism.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000263299600018	Publication Date	2009-02-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	66	Open Access
	Notes				Approved	Most recent IF: 4.536; 2009 IF: 4.224
	Call Number	UA @ lucian @ c:irua:71634			Serial	2411
Permanent link to this record



	Author	Delabie, A.; Sioncke, S.; Rip, J.; Van Elshocht, S.; Pourtois, G.; Mueller, M.; Beckhoff, B.; Pierloot, K.
	Title	Reaction mechanisms for atomic layer deposition of aluminum oxide on semiconductor substrates			Type	A1 Journal article
	Year	2012	Publication	Journal of vacuum science and technology: A: vacuum surfaces and films	Abbreviated Journal	J Vac Sci Technol A
	Volume	30	Issue	1	Pages	01a127-01a127,10
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this work, we have studied the TMA/H(2)O (TMA Al(CH(3))(3)) atomic layer deposition (ALD) of Al(2)O(3) on hydroxyl (OH) and thiol (SH) terminated semiconductor substrates. Total reflection x-ray fluorescence reveals a complex growth-per-cycle evolution during the early ALD reaction cycles. OH and SH terminated surfaces demonstrate growth inhibition from the second reaction cycle on. Theoretical calculations, based on density functional theory, are performed on cluster models to investigate the first TMA/H(2)O reaction cycle. Based on the theoretical results, we discuss possible mechanisms for the growth inhibition from the second reaction cycle on. In addition, our calculations show that AlCH(3) groups are hydrolyzed by a H(2)O molecule adsorbed on a neighboring Al atom, independent of the type of backbonds (Si-O, Ge-O, or Ge-S) of AlCH(3). The coordination of Al remains four-fold after the first TMA/H(2)O reaction cycle. (C) 2012 American Vacuum Society. [DOI: 10.1116/1.3664090]
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000298992800027	Publication Date	2011-12-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0734-2101;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.374	Times cited	41	Open Access
	Notes				Approved	Most recent IF: 1.374; 2012 IF: 1.432
	Call Number	UA @ lucian @ c:irua:96253			Serial	2818
Permanent link to this record