Home | << 1 2 3 >> |
Records | |||||
---|---|---|---|---|---|
Author | Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J. | ||||
Title | On the stress state dependence of the twinning rate and work hardening in twinning-induced plasticity steels | Type | A1 Journal article | ||
Year | 2012 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 66 | Issue | 12 | Pages | 966-971 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The influence of the stress state on the twinning rate and work hardening is studied in the case of an FeMnC TWIP steel strained in uniaxial tension, simple shear and rolling. The resulting stressstrain responses exhibit marked differences. The twinning rate, number of activated twinning systems in each grain, twin thickness and transmission of twins across grain boundaries are dependent on the imposed stress state during straining. Relationships between twin features and macroscopic work hardening rate are established. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000304641500004 | Publication Date | 2012-02-10 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 41 | Open Access | |
Notes | Iap | Approved | Most recent IF: 3.747; 2012 IF: 2.821 | ||
Call Number | UA @ lucian @ c:irua:98374 | Serial | 2454 | ||
Permanent link to this record | |||||
Author | Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J. | ||||
Title | Multiscale characterization of the work hardening mechanisms in Fe-Mn based TWIP steels | Type | A1 Journal article | ||
Year | 2012 | Publication | Steel research international | Abbreviated Journal | Steel Res Int |
Volume | 83 | Issue | 4 | Pages | 385-390 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | When strained in tension, high-manganese austenitic twinning induced plasticity (TWIP) steels achieve very high strength and elongation before necking. The main hypotheses available in the literature about the origin of their excellent work hardening include deformation twinning and dynamic strain ageing. In order to provide some answers, various experiments at different scales were conducted on FeMnC steels and the Fe28 wt%Mn3.5 wt%Al2.8 wt%Si alloy. At a macroscopic scale, tensile tests were performed on all the studied grades. It was shown that, though the FeMnAlSi based alloy retains very high elongation, the FeMnC steels properties are even more extraordinary. Tensile tests at different strain rates with the help of digital image correlation were also performed on the Fe20 wt%Mn1.2 wt%C steel to study the PLC effect occurring in this type of steel. It is suggested that supplementary hardening could come from reorientation of MnC pairs in the cores of the dislocations. At a microscopic scale, the Fe20 wt%Mn1.2 wt%C TWIP steel and the FeMnAlSi grade were thoroughly investigated by means of in situ TEM analysis. In the FeMnC steel, the formed twins could also lead to a composite effect, since they contain plenty of sessile dislocations. In the FeMnAlSi alloy, mechanical twins are thicker and contain fewer defects, leading to a lower work hardening than the other grade. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Verlag Stahleisen | Place of Publication | Düsseldorf | Editor | |
Language | Wos | 000302471600016 | Publication Date | 2012-02-22 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1611-3683; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 1.235 | Times cited | 12 | Open Access | |
Notes | Approved | Most recent IF: 1.235; 2012 IF: 0.493 | |||
Call Number | UA @ lucian @ c:irua:97391 | Serial | 2239 | ||
Permanent link to this record | |||||
Author | Wang, B.; Idrissi, H.; Shi, H.; Colla, M.S.; Michotte, S.; Raskin, J.P.; Pardoen, T.; Schryvers, D. | ||||
Title | Texture-dependent twin formation in nanocrystalline thin Pd films | Type | A1 Journal article | ||
Year | 2012 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 66 | Issue | 11 | Pages | 866-871 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Nanocrystalline Pd films were produced by electron-beam evaporation and sputter deposition. The electron-beam-evaporated films reveal randomly oriented nanograins with a relatively high density of growth twins, unexpected in view of the high stacking fault energy of Pd. In contrast, sputter-deposited films show a clear 〈1 1 1〉 crystallographic textured nanostructure without twins. These results provide insightful information to guide the generation of microstructures with enhanced strength/ductility balance in high stacking fault energy nanocrystalline metallic thin films. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000303621900007 | Publication Date | 2012-01-31 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 19 | Open Access | |
Notes | Iap; Fwo | Approved | Most recent IF: 3.747; 2012 IF: 2.821 | ||
Call Number | UA @ lucian @ c:irua:96955 | Serial | 3566 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Cordier, P.; Jacob, D.; Walte, N. | ||||
Title | Dislocations and plasticity of experimentally deformed coesite | Type | A1 Journal article | ||
Year | 2008 | Publication | European journal of mineralogy | Abbreviated Journal | Eur J Mineral |
Volume | 20 | Issue | 4 | Pages | 665-671 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Dislocation microstructures have been characterized by transmission electron microscopy in polycrystalline coesite deformed experimentally at 4 GPa, 1200 degrees C. Burgers vectors have been determined by large-angle convergent-beam electron diffraction. Sample orientation was assisted by precession electron diffraction to overcome difficulties arising from pseudo-hexagonal symmetry. The results are explained by using a pseudo-hexagonal setting. We found that most dislocations observed are of the 1/3 < 2 (1) over bar(1) over bar0 > type. No clear glide plane was identified, suggesting that climb is activated under these conditions. This conclusion is supported by the observation of numerous subgrain boundaries. We have also observed some [00011 dislocations. Finally, the C12/cl space group to which coesite belongs being centred, an additional slip system is observed: 1/6[(1) over bar2 (1) over bar3](01 (1) over bar1) (1/2[(1) over bar 10](110) in the monoclinic setting). | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Stuttgart | Editor | ||
Language | Wos | 000262891900021 | Publication Date | 2008-08-29 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0935-1221; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 1.362 | Times cited | 5 | Open Access | |
Notes | Approved | Most recent IF: 1.362; 2008 IF: 1.220 | |||
Call Number | UA @ lucian @ c:irua:94604 | Serial | 733 | ||
Permanent link to this record | |||||
Author | Colla, M.-S.; Wang, B.; Idrissi, H.; Schryvers, D.; Raskin, J.-P.; Pardoen, T. | ||||
Title | High strength-ductility of thin nanocrystalline palladium films with nanoscale twins : on-chip testing and grain aggregate model | Type | A1 Journal article | ||
Year | 2012 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
Volume | 60 | Issue | 4 | Pages | 1795-1806 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The mechanical behaviour of thin nanocrystalline palladium films with an ∼30 nm in plane grain size has been characterized on chip under uniaxial tension. The films exhibit a large strain hardening capacity and a significant increase in the strength with decreasing thickness. Transmission electron microscopy has revealed the presence of a moderate density of growth nanotwins interacting with dislocations. A semi-analytical grain aggregate model is proposed to investigate the impact of different contributions to the flow behaviour, involving the effect of twins, of grain size and of the presence of a thin surface layer. This model provides guidelines to optimizing the strength/ductility ratio of the films. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000301989500035 | Publication Date | 2012-02-02 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.301 | Times cited | 38 | Open Access | |
Notes | Iap | Approved | Most recent IF: 5.301; 2012 IF: 3.941 | ||
Call Number | UA @ lucian @ c:irua:94213 | Serial | 1465 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Turner, S.; Mitsuhara, M.; Wang, B.; Hata, S.; Coulombier, M.; Raskin, J.-P.; Pardoen, T.; Van Tendeloo, G.; Schryvers, D. | ||||
Title | Point defect clusters and dislocations in FIB irradiated nanocrystalline aluminum films : an electron tomography and aberration-corrected high-resolution ADF-STEM study | Type | A1 Journal article | ||
Year | 2011 | Publication | Microscopy and microanalysis | Abbreviated Journal | Microsc Microanal |
Volume | 17 | Issue | 6 | Pages | 983-990 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Focused ion beam (FIB) induced damage in nanocrystalline Al thin films has been characterized using advanced transmission electron microscopy techniques. Electron tomography was used to analyze the three-dimensional distribution of point defect clusters induced by FIB milling, as well as their interaction with preexisting dislocations generated by internal stresses in the Al films. The atomic structure of interstitial Frank loops induced by irradiation, as well as the core structure of Frank dislocations, has been resolved with aberration-corrected high-resolution annular dark-field scanning TEM. The combination of both techniques constitutes a powerful tool for the study of the intrinsic structural properties of point defect clusters as well as the interaction of these defects with preexisting or deformation dislocations in irradiated bulk or nanostructured materials. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Cambridge, Mass. | Editor | ||
Language | Wos | 000297832300018 | Publication Date | 2011-10-27 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1431-9276;1435-8115; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 1.891 | Times cited | 25 | Open Access | |
Notes | Iap; Fwo | Approved | Most recent IF: 1.891; 2011 IF: 3.007 | ||
Call Number | UA @ lucian @ c:irua:93627 | Serial | 2653 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Wang, B.; Colla, M.S.; Raskin, J.P.; Schryvers, D.; Pardoen, T. | ||||
Title | Ultrahigh strain hardening in thin palladium films with nanoscale twins | Type | A1 Journal article | ||
Year | 2011 | Publication | Advanced materials | Abbreviated Journal | Adv Mater |
Volume | 23 | Issue | 18 | Pages | 2119-2122 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Nanocrystalline Pd thin films containing coherent growth twin boundaries are deformed using on-chip nanomechanical testing. A large work-hardening capacity is measured. The origin of the observed behavior is unraveled using transmission electron microscopy and shows specific dislocations and twin boundaries interactions. The results indicate the potential for large strength and ductility balance enhancement in Pd films, as needed in membranes for H technologies. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Weinheim | Editor | ||
Language | Wos | 000291164200013 | Publication Date | 2011-04-04 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0935-9648; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 19.791 | Times cited | 57 | Open Access | |
Notes | Iap | Approved | Most recent IF: 19.791; 2011 IF: 13.877 | ||
Call Number | UA @ lucian @ c:irua:90103 | Serial | 3794 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Renard, K.; Schryvers, D.; Jacques, P.J. | ||||
Title | On the relationship between the twin internal structure and the work-hardening rate of TWIP steels | Type | A1 Journal article | ||
Year | 2010 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 63 | Issue | 10 | Pages | 961-964 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | FeMnC and FeMnSiAl TWIP steels deformed under the same conditions exhibit different work-hardening rates. The present study investigates the microstructure of plastically deformed FeMnC and FeMnSiAl samples, particularly the internal structure of the mechanically generated twins and their topology at the grain scale. Twins in the FeMnC steel are finer and full of sessile dislocations, rendering this material distinctly stronger with an improved work-hardening rate. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000282461800003 | Publication Date | 2010-07-20 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 145 | Open Access | |
Notes | Iap | Approved | Most recent IF: 3.747; 2010 IF: 2.820 | ||
Call Number | UA @ lucian @ c:irua:84472 | Serial | 2452 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Renard, K.; Ryelandt, L.; Schryvers, D.; Jacques, P.J. | ||||
Title | On the mechanism of twin formation in FeMnC TWIP steels | Type | A1 Journal article | ||
Year | 2010 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
Volume | 58 | Issue | 7 | Pages | 2464-2476 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Although it is well known that FeMnC TWIP steels exhibit high work-hardening rates, the elementary twinning mechanisms controlling the plastic deformation of these steels have still not been characterized. The aim of the present study is to analyse the extended defects related to the twinning occurrence using transmission electron microscopy. Based on these observations, the very early stage of twin nucleation can be attributed to the pole mechanism with deviation proposed by Cohen and Weertman or to the model of Miura, Takamura and Narita, while the twin growth is controlled by the pole mechanism proposed by Venables. High densities of sessile Frank dislocations are observed within the twins at the early stage of deformation, which can affect the growth and the stability of the twins, but also the strength of these twins and their interactions with the gliding dislocations present in the matrix. This experimental evidence is discussed and compared to recent results in order to relate the defects analysis to the macroscopic behaviour of this category of material. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000276523200018 | Publication Date | 2010-01-25 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.301 | Times cited | 244 | Open Access | |
Notes | Iap | Approved | Most recent IF: 5.301; 2010 IF: 3.791 | ||
Call Number | UA @ lucian @ c:irua:82270 | Serial | 2441 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Schryvers, D.; Salje, E.K.H.; Zhang, H.; Carpenter, M.A.; Moya, X. | ||||
Title | Pinning of the martensitic microstructures by dislocations in Cu74.08Al23.13Be2.79 | Type | P1 Proceeding | ||
Year | 2009 | Publication | Abbreviated Journal | ||
Volume | Issue | Pages | 02029,1-02029,5 | ||
Keywords | P1 Proceeding; Electron microscopy for materials research (EMAT) | ||||
Abstract | A single crystal of Cu74.08Al23.13Be2.79 undergoes a martensitic phase transition at 246K and 232K under heating and cooling, respectively. Surprisingly, the martensite phase is elastically much harder than the austenite phase showing that interfaces between various crystallographic variants are strongly pinned and can not be moved by external stress while the phase boundary between the austenite and martensite regions in the sample remains mobile. This unusual behavior was revealed by Dynamical Mechanical Analysis and Resonant Ultrasound Spectroscopy. Transmission Electron Microscopy shows that the pinning is generated by dislocations, which are inherited from the austenite phase. Such dislocations can hinder the movement of stacking faults in the 18R martensite structure or twin boundaries between martensite variants. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Edp | Place of Publication | Coutaboeuf | Editor | |
Language | Wos | 000274582300033 | Publication Date | 2009-08-31 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | ||
Impact Factor | Times cited | 2 | Open Access | ||
Notes | Approved | Most recent IF: NA | |||
Call Number | UA @ lucian @ c:irua:81952 | Serial | 2626 | ||
Permanent link to this record | |||||
Author | Salje, E.K.H.; Zhang, H.; Idrissi, H.; Schryvers, D.; Carpenter, M.A.; Moya, X.; Planes, A. | ||||
Title | Mechanical resonance of the austenite/martensite interface and the pinning of the martensitic microstructures by dislocations in Cu74.08Al23.13Be2.79 | Type | A1 Journal article | ||
Year | 2009 | Publication | Physical review: B: condensed matter and materials physics | Abbreviated Journal | Phys Rev B |
Volume | 80 | Issue | 13 | Pages | 134114,1-1134114,8 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | A single crystal of Cu74.08Al23.13Be2.79 undergoes a martensitic phase transition at 246 and 232 K under heating and cooling, respectively. The phase fronts between the austenite and martensite regions of the sample are weakly mobile with a power-law resonance under external stress fields. Surprisingly, the martensite phase is elastically much harder than the austenite phase showing that interfaces between various crystallographic variants are strongly pinned and cannot be moved by external stress while the phase boundary between the austenite and martensite regions in the sample remains mobile. This unusual behavior was studied by dynamical mechanical analysis (DMA) and resonant ultrasound spectroscopy. The remnant strain, storage modulus, and internal friction were recorded simultaneously for different applied forces in DMA. With increasing forces, the remnant strain increases monotonously while the internal friction peak height shows a minimum at 300 mN. Transmission electron microscopy shows that the pinning is generated by dislocations which are inherited from the austenite phase. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Lancaster, Pa | Editor | ||
Language | Wos | 000271351300033 | Publication Date | 2009-10-22 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1098-0121;1550-235X; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.836 | Times cited | 38 | Open Access | |
Notes | Multimat | Approved | Most recent IF: 3.836; 2009 IF: 3.475 | ||
Call Number | UA @ lucian @ c:irua:78542 | Serial | 1975 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Ryelandt, L.; Veron, M.; Schryvers, D.; Jacques, P.J. | ||||
Title | Is there a relationship between the stacking fault character and the activated mode of plasticity of FeMn-based austenitic steels? | Type | A1 Journal article | ||
Year | 2009 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 60 | Issue | 11 | Pages | 941-944 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | By changing the testing temperature, an austenitic FeMnAlSi alloy presents either å-martensite transformation or mechanical twinning during straining. In order to understand the nucleation and growth mechanisms involved in both phenomena, defects and particularly stacking faults, were characterized by transmission electron microscopy. It is observed that the character of the stacking faults also changes (from extrinsic to intrinsic) together with the temperature and the activated mode of plasticity. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000265359900005 | Publication Date | 2009-02-10 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 84 | Open Access | |
Notes | Iap | Approved | Most recent IF: 3.747; 2009 IF: 2.949 | ||
Call Number | UA @ lucian @ c:irua:77276 | Serial | 1751 | ||
Permanent link to this record | |||||
Author | Brognara, A.; Kashiwar, A.; Jung, C.; Zhang, X.; Ahmadian, A.; Gauquelin, N.; Verbeeck, J.; Djemia, P.; Faurie, D.; Dehm, G.; Idrissi, H.; Best, J.P.; Ghidelli, M. | ||||
Title | Tailoring mechanical properties and shear band propagation in ZrCu metallic glass nanolaminates through chemical heterogeneities and interface density | Type | A1 Journal article | ||
Year | 2024 | Publication | Small Structures | Abbreviated Journal | |
Volume | Issue | Pages | 2400011-11 | ||
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | The design of high‐performance structural thin films consistently seeks to achieve a delicate equilibrium by balancing outstanding mechanical properties like yield strength, ductility, and substrate adhesion, which are often mutually exclusive. Metallic glasses (MGs) with their amorphous structure have superior strength, but usually poor ductility with catastrophic failure induced by shear bands (SBs) formation. Herein, we introduce an innovative approach by synthesizing MGs characterized by large and tunable mechanical properties, pioneering a nanoengineering design based on the control of nanoscale chemical/structural heterogeneities. This is realized through a simplified model Zr 24 Cu 76 /Zr 61 Cu 39 , fully amorphous nanocomposite with controlled nanoscale periodicity ( Λ , from 400 down to 5 nm), local chemistry, and glass–glass interfaces, while focusing in‐depth on the SB nucleation/propagation processes. The nanolaminates enable a fine control of the mechanical properties, and an onset of crack formation/percolation (>1.9 and 3.3%, respectively) far above the monolithic counterparts. Moreover, we show that SB propagation induces large chemical intermixing, enabling a brittle‐to‐ductile transition when Λ ≤ 50 nm, reaching remarkably large plastic deformation of 16% in compression and yield strength ≈2 GPa. Overall, the nanoengineered control of local heterogeneities leads to ultimate and tunable mechanical properties opening up a new approach for strong and ductile materials. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | Publication Date | 2024-05-20 | ||
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2688-4062 | ISBN | Additional Links | UA library record | |
Impact Factor | Times cited | Open Access | |||
Notes | Approved | Most recent IF: NA | |||
Call Number | UA @ admin @ c:irua:205798 | Serial | 9176 | ||
Permanent link to this record | |||||
Author | Coulombier, M.; Baral, P.; Orekhov, A.; Dohmen, R.; Raskin, J.P.; Pardoen, T.; Cordier, P.; Idrissi, H. | ||||
Title | On-chip very low strain rate rheology of amorphous olivine films | Type | A1 Journal article | ||
Year | 2024 | Publication | Acta materialia | Abbreviated Journal | |
Volume | 266 | Issue | Pages | 119693-12 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Recent observations made by the authors revealed the activation of stress induced amorphization and sliding at grain boundary in olivine [1], a mechanism which is expected to play a pivotal role in the viscosity drop at the lithosphere-asthenosphere boundary and the brittle -ductile transition in the lithospheric mantle. However, there is a lack of information in the literature regarding the intrinsic mechanical properties and the elementary deformation mechanisms of this material, especially at time scales relevant for geodynamics. In the present work, amorphous olivine films were obtained by pulsed laser deposition (PLD). The mechanical response including the rate dependent behavior are investigated using a tension -on -chip (TOC) method developed at UCLouvain allowing to perform creep/relaxation tests on thin films at extremely low strain rates. In the present work, strain rate down to 10-12 s- 1 was reached which is unique. High strain rate sensitivity of 0.054 is observed together with the activation of relaxation at the very early stage of deformation. Furthermore, digital image correlation (DIC), used for the first time on films deformed by TOC, reveals local strain heterogeneities. The relationship between such heterogeneities, the high strain rate sensitivity and the effect of the electron beam in the scanning electron microscope is discussed and compared to the literature. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001170513400001 | Publication Date | 2024-01-17 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 9.4 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 9.4; 2024 IF: 5.301 | |||
Call Number | UA @ admin @ c:irua:204864 | Serial | 9163 | ||
Permanent link to this record | |||||
Author | Kashiwar, A.; Arseenko, M.; Simar, A.; Idrissi, H. | ||||
Title | On the role of microstructural defects on precipitation, damage, and healing behavior in a novel Al-0.5Mg2Si alloy | Type | A1 Journal article | ||
Year | 2024 | Publication | Materials & design | Abbreviated Journal | |
Volume | 239 | Issue | Pages | 112765-112769 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | A recently developed healable Al-Mg2Si designed by the programmed damage and repair (PDR) strategy is studied considering the role microstructural defects play on precipitation, damage, and healing. The alloy incorporates sacrificial Mg2Si particles that precipitate after friction stir processing (FSP). They act as damage localization sites and are healable based on the solid-state diffusion of Al-matrix. A combination of different transmission electron microscopy (TEM) imaging techniques enabled the visualization and quantification of various crystallographic defects and the spatial distribution of Mg2Si precipitates. Intragrain nucleation is found to be the dominant mechanism for precipitation during FSP whereas grain boundaries and subgrain boundaries mainly lead to coarsening of the precipitates. The statistical and spatial analyses of the damaged particles have shown particle fracture as the dominant damage mechanism which is strongly dependent on the size and aspect ratio of the particles whereas the damage was not found to depend on the location of the precipitates within the matrix. The damaged particles are associated with dislocations accumulated around them. The interplay of these dislocations is directly visualized during healing based on in situ TEM heating which revealed recovery in the matrix as an operative mechanism during the diffusion healing of the PDR alloy. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001194110200001 | Publication Date | 2024-02-17 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0264-1275; 1873-4197 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 8.4 | Times cited | Open Access | Not_Open_Access | |
Notes | Approved | Most recent IF: 8.4; 2024 IF: 4.364 | |||
Call Number | UA @ admin @ c:irua:203298 | Serial | 9068 | ||
Permanent link to this record | |||||
Author | Ding, L.; Zhao, M.; Ehlers, F.J.H.; Jia, Z.; Zhang, Z.; Weng, Y.; Schryvers, D.; Liu, Q.; Idrissi, H. | ||||
Title | “Branched” structural transformation of the L12-Al3Zr phase manipulated by Cu substitution/segregation in the Al-Cu-Zr alloy system | Type | A1 Journal article | ||
Year | 2024 | Publication | Journal of materials science & technology | Abbreviated Journal | Journal of Materials Science & Technology |
Volume | 185 | Issue | Pages | 186-206 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The effect of Cu on the evolution of the Al3Zr phase in an Al-Cu-Zr cast alloy during solution treatment at 500 °C has been thoroughly studied by combining atomic resolution high-angle annular dark-field scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy and first-principles cal- culations. The heat treatment initially produces a pure L12-Al3Zr microstructure, allowing for about 13 % Cu to be incorporated in the dispersoid. Cu incorporation increases the energy barrier for anti-phase boundary (APB) activation, thus stabilizing the L12 structure. Additional heating leads to a Cu-induced “branched”path for the L12 structural transformation, with the latter process accelerated once the first APB has been created. Cu atoms may either (i) be repelled by the APBs, promoting the transformation to a Cu-poor D023 phase, or (ii) they may segregate at one Al-Zr layer adjacent to the APB, promoting a transformation to a new thermodynamically favored phase, Al4CuZr, formed when these segregation layers are periodically arranged. Theoretical studies suggest that the branching of the L12 transformation path is linked to the speed at which an APB is created, with Cu attraction triggered by a comparatively slow process. This unexpected transformation behavior of the L12-Al3Zr phase opens a new path to understanding, and potentially regulating the Al3Zr dispersoid evolution for high temperature applications. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001154261100001 | Publication Date | 2023-12-24 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1005-0302 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 10.9 | Times cited | Open Access | Not_Open_Access | |
Notes | This work was supported by the National Key Research and Development Program (No. 2020YFA0405900), the National Natural Science Foundation of China (Grant No. 52371111 and U2141215 ), the Natural Science Foundation of Jiangsu Province (No. BE2022159 ). We are grateful to the High Performance Computing Center of Nanjing Tech University for supporting the computational resources. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR- FNRS). | Approved | Most recent IF: 10.9; 2024 IF: 2.764 | ||
Call Number | EMAT @ emat @c:irua:202392 | Serial | 8981 | ||
Permanent link to this record | |||||
Author | Bagherpour, A.; Baral, P.; Colla, M.-S.; Orekhov, A.; Idrissi, H.; Haye, E.; Pardoen, T.; Lucas, S. | ||||
Title | Tailoring Mechanical Properties of a-C:H:Cr Coatings | Type | A1 Journal Article | ||
Year | 2023 | Publication | Coatings | Abbreviated Journal | Coatings |
Volume | 13 | Issue | 12 | Pages | 2084 |
Keywords | A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; | ||||
Abstract | The development of coatings with tunable performances is critical to meet a wide range of technological applications each one with different requirements. Using the plasma-enhanced chemical vapor deposition (PECVD) process, scientists can create hydrogenated amorphous carbon coatings doped with metal (a-C:H:Me) with a broad range of mechanical properties, varying from those resembling polymers to ones resembling diamond. These diverse properties, without clear relations between the different families, make the material selection and optimization difficult but also very rich. An innovative approach is proposed here based on projected performance indices related to fracture energy, strength, and stiffness in order to classify and optimize a-C:H:Me coatings. Four different a-C:H:Cr coatings deposited by PECVD with Ar/C2H2 discharge under different bias voltage and pressures are investigated. A path is found to produce coatings with a selective critical energy release rate between 5–125 J/m2 without compromising yield strength (1.6–2.7 GPa) and elastic limit (≈0.05). Finally, fine-tuned coatings are categorized to meet desired applications under different testing conditions. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001136013600001 | Publication Date | 2023-12-14 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2079-6412 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | Times cited | Open Access | |||
Notes | Walloon region under the PDR FNRS, C 62/5—PDR/OL 33677636 ; Belgian National Fund for Scientific Research, CDR—J.0113.20 ; National Fund for Scientific Reaserch; | Approved | Most recent IF: NA | ||
Call Number | EMAT @ emat @c:irua:202390 | Serial | 8982 | ||
Permanent link to this record | |||||
Author | Gheysen, J.; Kashiwar, A.; Idrissi, H.; Villanova, J.; Simar, A. | ||||
Title | Suppressing hydrogen blistering in a magnesium-rich healable laser powder bed fusion aluminum alloy analyzed by in-situ high resolution techniques | Type | A1 Journal article | ||
Year | 2023 | Publication | Materials & design | Abbreviated Journal | |
Volume | 231 | Issue | Pages | 112024-11 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Hydrogen blistering, i.e. precipitation of supersaturated hydrogen at elevated temperatures, increases porosity during heat treatments in 4xxx series Al alloys manufactured by laser powder bed fusion (LPBF), as demonstrated by 3D X-ray nano-imaging in AlSi12. This paper proposes the design of a healable Al alloy to suppress hydrogen blistering and improve the damage management. The strategy consists of solute atoms diffusing towards nano-voids and precipitating on their surface, thereby filling the damage sites. A new healable Al alloy was thus developed and successfully manufactured by LPBF. 3D X-ray nano-imaging evidenced that the addition of Mg in 4xxx series Al alloys suppresses the hydrogen blistering. This is expectedly due to Mg in solid solution which increases the hydrogen solubility in the Al matrix and due to the healing of these hydrogen pores. Moreover, a significant healing of voids smaller than 500 nm diameter is observed. In-situ heating inside transmission electron microscopy pointed out that Al matrix diffuses inside the fractured Mg2Si particles, thereby demonstrating the healing ability of the new alloy. This has opened the doors to development of new healable Al alloys manufactured by LPBF as well as to new post-treatments to tailor mechanical properties and microstructure without hydrogen blistering. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001055174900001 | Publication Date | 2023-05-20 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0264-1275; 1873-4197 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 8.4 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 8.4; 2023 IF: 4.364 | |||
Call Number | UA @ admin @ c:irua:196536 | Serial | 8939 | ||
Permanent link to this record | |||||
Author | Krishnamurthy, S.C.; Arseenko, M.; Kashiwar, A.; Dufour, P.; Marchal, Y.; Delahaye, J.; Idrissi, H.; Pardoen, T.; Mertens, A.; Simar, A. | ||||
Title | Controlled precipitation in a new Al-Mg-Sc alloy for enhanced corrosion behavior while maintaining the mechanical performance | Type | A1 Journal article | ||
Year | 2023 | Publication | Materials characterization | Abbreviated Journal | |
Volume | 200 | Issue | Pages | 112886-11 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The hot working of 5xxx series alloys with Mg ≥3.5 wt% is a concern due to the precipitation of β (Al3Mg2) phase at grain boundaries favoring Inter Granular Corrosion (IGC). The mechanical and corrosion properties of a new 5028-H116 Al-Mg-Sc alloy under various β precipitates distribution is analyzed by imposing different cooling rates from the hot forming temperature (i.e. 325 °C). The mechanical properties are maintained regardless of the heat treatment. However, the different nucleation sites and volume fractions of β precipitates for different cooling rates critically affect IGC. Controlled furnace cooling after the 325 °C heat treatment is ideal in 5028-H116 alloy to reduce susceptibility to IGC after sensitization. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000977059100001 | Publication Date | 2023-04-03 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1044-5803 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.7 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 4.7; 2023 IF: 2.714 | |||
Call Number | UA @ admin @ c:irua:195598 | Serial | 7291 | ||
Permanent link to this record | |||||
Author | Bignoli, F.; Rashid, S.; Rossi, E.; Jaddi, S.; Djemia, P.; Terraneo, G.; Li Bassi, A.; Idrissi, H.; Pardoen, T.; Sebastiani, M.; Ghidelli, M. | ||||
Title | Effect of annealing on mechanical properties and thermal stability of ZrCu/O nanocomposite amorphous films synthetized by pulsed laser deposition | Type | A1 Journal article | ||
Year | 2022 | Publication | Materials & design | Abbreviated Journal | Mater Design |
Volume | 221 | Issue | Pages | 110972-10 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Binary ZrCu nanocomposite amorphous films are synthetized by pulsed laser deposition (PLD) under vac-uum (2 x 10-3 Pa) and 10 Pa He pressure, leading to fully amorphous compact and nanogranular mor-phologies, respectively. Then, post-thermal annealing treatments are carried out to explore thermal stability and crystallization phenomena together with the evolution of mechanical properties. Compact films exhibit larger thermal stability with partial crystallization phenomena starting at 420 degrees C, still to be completed at 550 degrees C, while nanogranular films exhibit early-stage crystallization at 300 degrees C and com-pleted at 485 degrees C. The microstructural differences are related to a distinct evolution of mechanical | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000886072100004 | Publication Date | 2022-07-21 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0264-1275; 1873-4197 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 8.4 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 8.4 | |||
Call Number | UA @ admin @ c:irua:192194 | Serial | 7299 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Béché, A.; Gauquelin, N.; Ul-Haq, I.; Bollinger, C.; Demouchy, S.; Verbeeck, J.; Pardoen, T.; Schryvers, D.; Cordier, P. | ||||
Title | On the formation mechanisms of intragranular shear bands in olivine by stress-induced amorphization | Type | A1 Journal article | ||
Year | 2022 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
Volume | 239 | Issue | Pages | 118247-118249 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Intragranular amorphization shear lamellae are found in deformed olivine aggregates. The detailed trans-mission electron microscopy analysis of intragranular lamella arrested in the core of a grain provides novel information on the amorphization mechanism. The deformation field is complex and heteroge-neous, corresponding to a shear crack type instability involving mode I, II and III loading components. The formation and propagation of the amorphous lamella is accompanied by the formation of crystal defects ahead of the tip. These defects are geometrically necessary [001] dislocations, characteristics of high-stress deformation in olivine, and rotational nanodomains which are tentatively interpreted as disclinations. We show that these defects play an important role in dictating the path followed by the amorphous lamella. Stress-induced amorphization in olivine would thus result from a direct crystal-to -amorphous transformation associated with a shear instability and not from a mechanical destabilization due to the accumulation of high number of defects from an intense preliminary deformation. The pref-erential alignment of some lamellae along (010) is a proof of the lower ultimate mechanical strength of these planes.(c) 2022 The Authors. Published by Elsevier Ltd on behalf of Acta Materialia Inc. This is an open access article under the CC BY license ( http://creativecommons.org/licenses/by/4.0/ ) | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000861076600004 | Publication Date | 2022-08-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.4 | Times cited | 5 | Open Access | OpenAccess |
Notes | The QuanTEM microscope was partially funded by the Flemish government. The K2 camera was funded by FWO Hercules fund G0H4316N 'Direct electron detector for soft matter TEM'. A. Beche acknowledges funding from FWO project G093417N ('Compressed sensing enabling low dose imaging in transmission electron microscopy'). H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). This work was supported by the FNRS under Grant PDR – T011322F and by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme under grant agreement No 787,198 Time Man. J-L Rouviere is acknowledged for his support with the GPA softawre. | Approved | Most recent IF: 9.4 | ||
Call Number | UA @ admin @ c:irua:191432 | Serial | 7186 | ||
Permanent link to this record | |||||
Author | Arseenko, M.; Hannard, F.; Ding, L.; Zhao, L.; Maire, E.; Villanova, J.; Idrissi, H.; Simar, A. | ||||
Title | A new healing strategy for metals : programmed damage and repair | Type | A1 Journal article | ||
Year | 2022 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
Volume | 238 | Issue | Pages | 118241-10 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Self-healing strategies aim at avoiding part repair or even replacement, which is time consuming, expen-sive and generates waste. However, strategies for metallic systems are still under-developed and solid-state solutions for room temperature service are limited to nano-scale damage repair. Here we propose a new healing strategy of micron-sized damage requiring only short and low temperature heating. This new strategy is based on damage localization particles, which can be healed by fast diffusing atoms of the matrix activated during heat treatment. The healing concept was successfully validated with a com-mercial aluminum alloy and manufactured by Friction Stir Processing (FSP). Damage was demonstrated to initiate on particles that were added to the matrix during material processing. In situ 2D and 3D nano -imaging confirmed healing of the damaged material and showed that heating this material for 10 min at 400 degrees C is sufficient to heal incipient damage with complete filling of 70% of all damage (and up to 90% when their initial size is below 0.2 mu m). Furthermore, strength is retained and the work of fracture of the alloy is improved by about 40% after healing. The proposed Programmed Damage and Repair healing strategy could be extended to other metal based systems presenting precipitation. (C) 2022 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000843502700006 | Publication Date | 2022-08-03 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.4 | Times cited | Open Access | Not_Open_Access | |
Notes | Approved | Most recent IF: 9.4 | |||
Call Number | UA @ admin @ c:irua:190561 | Serial | 7121 | ||
Permanent link to this record | |||||
Author | Poulain, R.; Lumbeeck, G.; Hunka, J.; Proost, J.; Savolainen, H.; Idrissi, H.; Schryvers, D.; Gauquelin, N.; Klein, A. | ||||
Title | Electronic and chemical properties of nickel oxide thin films and the intrinsic defects compensation mechanism | Type | A1 Journal article | ||
Year | 2022 | Publication | ACS applied electronic materials | Abbreviated Journal | |
Volume | 4 | Issue | 6 | Pages | 2718-2728 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Although largely studied, contradictory results on nickel oxide (NiO) properties can be found in the literature. We herein propose a comprehensive study that aims at leveling contradictions related to NiO materials with a focus on its conductivity, surface properties, and the intrinsic charge defects compensation mechanism with regards to the conditions preparation. The experiments were performed by in situ photo-electron spectroscopy, electron energy loss spectroscopy, and optical as well as electrical measurements on polycrystalline NiO thin films prepared under various preparation conditions by reactive sputtering. The results show that surface and bulk properties were strongly related to the deposition temperature with in particular the observation of Fermi level pinning, high work function, and unstable oxygen-rich grain boundaries for the thin films produced at room temperature but not at high temperature (>200 degrees C). Finally, this study provides substantial information about surface and bulk NiO properties enabling to unveil the origin of the high electrical conductivity of room temperature NiO thin films and also for supporting a general electronic charge compensation mechanism of intrinsic defects according to the deposition temperature. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000819431200001 | Publication Date | 2022-06-07 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2637-6113 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | Open Access | Not_Open_Access | ||
Notes | Approved | Most recent IF: NA | |||
Call Number | UA @ admin @ c:irua:189555 | Serial | 7081 | ||
Permanent link to this record | |||||
Author | Ding, L.; Sapanathan, T.; Schryvers, D.; Simar, A.; Idrissi, H. | ||||
Title | On the formation of antiphase boundaries in Fe₄Al₁₃ intermetallics during a high temperature treatment | Type | A1 Journal article | ||
Year | 2022 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 215 | Issue | Pages | 114726-6 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | In this paper, we report atomic scale observations and formation mechanisms of a high-density of antiphase boundaries (APBs) within an ultra-fine-grained Fe4Al13 intermetallic layer at an Al/steel interface after a heat treatment at 596 degrees C. The results reveal that the APBs are formed by nucleation and the glide of partial dislocations with Burgers vector of b/3[010] (b = 12.47 angstrom). The intensive activation of APBs locally transforms the Fe4Al13 structure from the quasicrystal approximant structure to a quasicrystal. Very few stacking faults and nanotwins are observed indicating that the formation of planar defects is mainly driven by this transformation. This new insight on the formation of high density of APBs could possibly lead to an improvement in toughness by increasing the strength/ductility balance of this intermetallic. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000800016600003 | Publication Date | 2022-04-08 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 6 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 6 | |||
Call Number | UA @ admin @ c:irua:188644 | Serial | 7088 | ||
Permanent link to this record | |||||
Author | Choisez, L.; Ding, L.; Marteleur, M.; Kashiwar, A.; Idrissi, H.; Jacques, P.J. | ||||
Title | Shear banding-activated dynamic recrystallization and phase transformation during quasi-static loading of β-metastable Ti – 12 wt % Mo alloy | Type | A1 Journal article | ||
Year | 2022 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
Volume | 235 | Issue | Pages | 118088-13 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Dynamic recrystallization (DRX) within adiabatic shear bands forming during the fracture of TRIP-TWIP β−metastable Ti-12Mo (wt %) alloy was recently reported. The formation of 1-3 µm thick-adiabatic shear bands, and of dynamic recrystallization, was quite surprising as their occurrence generally requires high temperature and/or high strain rate loading while these samples were loaded in quasi-static conditions at room temperature. To better understand the fracture mechanism and associated microstructural evolution, thin foils representative of different stages of the fracture process were machined from the fracture surface by Focused Ion Beam (FIB) and analyzed by Transmission Electron Microscopy (TEM) and Automated Crystal Orientation mapping (ACOM-TEM). Complex microstructure transformations involving severe plastic deformed nano-structuration, crystalline rotation and local precipitation of the omega phase were identified. The spatial and temporal evolution of the microstructure during the propagation of the crack was explained through dynamic recovery and continuous dynamic recrystallization, and linked to the modelled distribution of temperature and strain level where TEM samples were extracted. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000814729300005 | Publication Date | 2022-06-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.4 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 9.4 | |||
Call Number | UA @ admin @ c:irua:188505 | Serial | 7096 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Carrez, P.; Cordier, P. | ||||
Title | On amorphization as a deformation mechanism under high stresses | Type | A1 Journal article | ||
Year | 2022 | Publication | Current opinion in solid state and materials science | Abbreviated Journal | Curr Opin Solid St M |
Volume | 26 | Issue | 1 | Pages | 100976-17 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | In this paper we review the work related to amorphization under mechanical stress. Beyond pressure, we highlight the role of deviatoric or shear stresses. We show that the most recent works make amorphization appear as a deformation mechanism in its own right, in particular under extreme conditions (shocks, deformations under high stresses, high strain-rates). | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000779433300002 | Publication Date | 2022-01-13 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-0286 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 11 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 11 | |||
Call Number | UA @ admin @ c:irua:188014 | Serial | 7064 | ||
Permanent link to this record | |||||
Author | Lezaack, M.B.; Hannard, F.; Zhao, L.; Orekhov, A.; Adrien, J.; Miettinen, A.; Idrissi, H.; Simar, A. | ||||
Title | Towards ductilization of high strength 7XXX aluminium alloys via microstructural modifications obtained by friction stir processing and heat treatments | Type | A1 Journal article | ||
Year | 2021 | Publication | Materialia | Abbreviated Journal | |
Volume | 20 | Issue | Pages | 101248 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | High strength 7XXX aluminium series reach exceptional strength, higher than all other industrial aluminium alloys. However, they suffer from a lack of ductility compared to softer series. This work presents a procedure to improve the ductility of 7475 Al alloy in high strength condition, reaching a true fracture strain of 70% at full 500 MPa T6 yield strength. Using friction stir processing (FSP) and post-FSP heat treatments, 100% of industrial rolled material T6 yield stress is maintained but a 180% increase in fracture strain is measured for the processed material. This ductility improvement is studied by in-situ synchrotron X-ray tomography and is explained by the reduction of intermetallic particles size and the homogenization of their spatial distribution. Furthermore, the microstructure after FSP shows equiaxed refined grains which favour crack deviation as opposed to large cracks parallel to the elongated coarse grains in rolled plate. These results are paving the way to better formability and crashworthiness of 7XXX alloys. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000718127100006 | Publication Date | 2021-10-19 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2589-1529 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | Open Access | Not_Open_Access | ||
Notes | Approved | Most recent IF: NA | |||
Call Number | UA @ admin @ c:irua:184145 | Serial | 6894 | ||
Permanent link to this record | |||||
Author | Baral, P.; Orekhov, A.; Dohmen, R.; Coulombier, M.; Raskin, J.P.; Cordier, P.; Idrissi, H.; Pardoen, T. | ||||
Title | Rheology of amorphous olivine thin films characterized by nanoindentation | Type | A1 Journal article | ||
Year | 2021 | Publication | Acta Materialia | Abbreviated Journal | Acta Mater |
Volume | 219 | Issue | Pages | 117257 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The rheological properties of amorphous olivine thin films deposited by pulsed laser deposition have been studied based on ambient temperature nanoindentation under constant strain-rate as well as re-laxation conditions. The amorphous olivine films exhibit a viscoelastic-viscoplastic behavior with a significant rate dependency. The strain-rate sensitivity m is equal to similar to 0 . 05 which is very high for silicates, indicating a complex out-of-equilibrium structure. The minimum apparent activation volume determined from nanoindentation experiments corresponds to Mg and Fe atomic metallic sites in the (Mg,Fe)(2)SiO4 crystalline lattice. The ambient temperature creep behavior of the amorphous olivine films differs very much from the one of single crystal olivine. This behavior directly connects to the recent demonstration of the activation of grain boundary sliding in polycrystalline olivine following grain boundary amorphization under high-stress. (C) 2021 The Authors. Published by Elsevier Ltd on behalf of Acta Materialia Inc. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000706867800004 | Publication Date | 2021-08-19 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.301 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 5.301 | |||
Call Number | UA @ admin @ c:irua:182592 | Serial | 6882 | ||
Permanent link to this record | |||||
Author | Samaeeaghmiyoni, V.; Cordier, P.; Demouchy, S.; Bollinger, C.; Gasc, J.; Mussi, A.; Schryvers, D.; Idrissi, H. | ||||
Title | Research data supporting for Stress-induced amorphization triggers deformation in the lithospheric mantle | Type | Dataset | ||
Year | 2020 | Publication | Abbreviated Journal | ||
Volume | Issue | Pages | |||
Keywords | Dataset; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | Publication Date | |||
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | ISBN | Additional Links | UA library record | ||
Impact Factor | Times cited | Open Access | |||
Notes | Approved | Most recent IF: NA | |||
Call Number | UA @ admin @ c:irua:180668 | Serial | 6881 | ||
Permanent link to this record | |||||
Author | Ghidelli, M.; Orekhov, A.; Bassi, A.L.; Terraneo, G.; Djemia, P.; Abadias, G.; Nord, M.; Béché, A.; Gauquelin, N.; Verbeeck, J.; Raskin, J.-p.; Schryvers, D.; Pardoen, T.; Idrissi, H. | ||||
Title | Novel class of nanostructured metallic glass films with superior and tunable mechanical properties | Type | A1 Journal article | ||
Year | 2021 | Publication | Acta Materialia | Abbreviated Journal | Acta Mater |
Volume | Issue | Pages | 116955 | ||
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | A novel class of nanostructured Zr50Cu50 (%at.) metallic glass films with superior and tunable mechanical properties is produced by pulsed laser deposition. The process can be controlled to synthetize a wide range of film microstructures including dense fully amorphous, amorphous embedded with nanocrystals and amorphous nano-granular. A unique dense self-assembled nano-laminated atomic arrangement characterized by alternating Cu-rich and Zr/O-rich nanolayers with different local chemical enrichment and amorphous or amorphous-crystalline composite nanostructure has been discovered, while significant in-plane clustering is reported for films synthetized at high deposition pressures. This unique nanoarchitecture is at the basis of superior mechanical properties including large hardness and elastic modulus up to 10 and 140 GPa, respectively and outstanding total elongation to failure (>9%), leading to excellent strength/ductility balance, which can be tuned by playing with the film architecture. These results pave the way to the synthesis of novel class of engineered nanostructured metallic glass films with high structural performances attractive for a number of applications in microelectronics and coating industry. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000670077800004 | Publication Date | 2021-05-12 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.301 | Times cited | 27 | Open Access | OpenAccess |
Notes | H.I. is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). This work was supported by the Fonds de la Recherche Scientifique – FNRS under Grant T.0178.19 and Grant CDR– J011320F. We acknowledge funding for the direct electron detector used in the 4D stem studies from the Hercules fund 'Direct electron detector for soft matter TEM' from the Flemish Government J.V acknowledges funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 823717 – ESTEEM3. A.O. has received partial funding from the GOA project “Solarpaint” of the University of Antwerp. A.B. and J.V. acknowledge funding through FWO project G093417N ('Compressed sensing enabling low dose imaging in transmission electron microscopy') from the Flanders Research Fund. M.G. and A.L.B acknowledge Chantelle Ekanem for support in PLD depositions. | Approved | Most recent IF: 5.301 | ||
Call Number | EMAT @ emat @c:irua:178142 | Serial | 6761 | ||
Permanent link to this record |