NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	571–600 of 607 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 >>

List View

Citations

Details

	Records
	Author	Verbruggen, S.W.; Keulemans, M.; van Walsem, J.; Tytgat, T.; Lenaerts, S.; Denys, S.
	Title	CFD modeling of transient adsorption/desorption behavior in a gas phase photocatalytic fiber reactor			Type	A1 Journal article
	Year	2016	Publication	Chemical engineering journal	Abbreviated Journal	Chem Eng J
	Volume	292	Issue		Pages	42-50
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	We present the use of computational fluid dynamics (CFD) for accurately determining the adsorption parameters of acetaldehyde on photocatalytic fiber filter material, integrated in a continuous flow system. Unlike the traditional analytical analysis based on Langmuir adsorption, not only steady-state situations but also transient phenomena can be accounted for. Air displacement effects in the reactor and gas detection cell are investigated and inherently made part of the model. Incorporation of a surface aldol condensation reaction in the CFD analysis further improves the accuracy of the model which enables to extract precise, intrinsic adsorption parameters for situations in which analytical analysis would otherwise fail.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000373648000005	Publication Date	2016-02-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947; 1873-3212	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.216	Times cited	12	Open Access
	Notes	; S.W.V. acknowledges the Research Foundation – Flanders (FWO) for a postdoctoral fellowship. M.K. acknowledges the IWT for a Ph.D. fellowship. Konstantina Kalafata and Ioanna Fasaki are greatly thanked for providing the NanoPhos suspension. Bioscience Engineering bachelor students M. Gerritsma, J. Helsen and Y. Riahi Drif are thanked for their assistance in performing the adsorption experiments. ;			Approved	Most recent IF: 6.216
	Call Number	UA @ admin @ c:irua:130876			Serial	5934
Permanent link to this record



	Author	Hauchecorne, B.; Tytgat, T.; Terrens, D.; Vanpachtenbeke, F.; Lenaerts, S.
	Title	Validation of a newly developed FTIR in situ reactor: real time study of photocatalytic degradation of nitric oxide			Type	A1 Journal article
	Year	2010	Publication	Infrared physics and technology	Abbreviated Journal	Infrared Phys Techn
	Volume	53	Issue	6	Pages	469-473
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	For many years, photocatalysis has been proposed as one of the promising techniques to abate environmental pollutants. To improve these reactions it is vital to know the reaction mechanisms of the photocatalytic degradation. This new reactor will make it possible to study the catalytic surface at the moment the reactions occur. By the means of UV LED illumination there is no need of an external UV lamp and thus lowers the cost. The validation of this newly developed reactor is done by investigating the photocatalytic reaction mechanism of nitric oxide (NO) and comparing these findings with those already discussed in literature. From these results, it became clear that the newly developed FTIR in situ reactor allows real time study of photocatalytic degradations.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000285169400009	Publication Date	2010-10-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1350-4495	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.713	Times cited	12	Open Access
	Notes	; ;			Approved	Most recent IF: 1.713; 2010 IF: 0.932
	Call Number	UA @ admin @ c:irua:84561			Serial	6002
Permanent link to this record



	Author	Smits, M.; Huygh, D.; Craeye, B.; Lenaerts, S.
	Title	Effect of process parameters on the photocatalytic soot degradation on self-cleaning cementitious materials			Type	A1 Journal article
	Year	2014	Publication	Catalysis today	Abbreviated Journal	Catal Today
	Volume	230	Issue		Pages	250-255
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL); Energy and Materials in Infrastructure and Buildings (EMIB)
	Abstract	Soot deposition has the negative ability to devalue the aesthetic appearance of buildings. Titanium dioxide applied on the building material is one way to counteract this problem as it provides air-purifying and self-cleaning properties due to its photocatalytic activity. In literature, photocatalytic soot oxidation was described, but until now, little information was available about the influence of process parameters on the photocatalytic degradation efficiency. The influence of three process parameters was tested in this study, namely TiO2 concentration, soot concentration and water-to-cement ratio (WIC-ratio) of the mortar substrates. The results revealed 50 mu gTiO(2) cm(-2) is better to use on the cementitious materials than 250 mu gTiO(2) cm(-2). The soot concentrations occurring in real-world situations will not inhibit the photocatalyst to be activated by light. Furthermore, the photonic efficiency increases slightly for lower WIC-ratios. This can be of interest for structural building applications, since a lower WIC-ratio results in a lower porosity of the samples and consequently in an increase in mortar strength. (C) 2013 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000333800300039	Publication Date	2013-10-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0920-5861	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.636	Times cited	14	Open Access
	Notes	; This work was supported by a PhD grant (M. Smits) from the University of Antwerp. We would like to thank T. Tytgat for the scientific discussion and Evonik for delivering the materials used in the experiments. ;			Approved	Most recent IF: 4.636; 2014 IF: 3.893
	Call Number	UA @ admin @ c:irua:117142			Serial	5946
Permanent link to this record



	Author	Tytgat, T.; Hauchecorne, B.; Smits, M.; Verbruggen, S.; Lenaerts, S.
	Title	Concept and validation of a fully automated photocatalytic test setup			Type	A1 Journal article
	Year	2012	Publication	Journal of laboratory automation	Abbreviated Journal	Jala-J Lab Autom
	Volume	17	Issue	2	Pages	134-143
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Photocatalytic activity can be studied by several methods, each with its own strengths and weaknesses. To study photocatalytic activity in an easy, user-friendly, and realistic way, a completely new setup has been built. The setup is modularly constructed around Fourier transform infrared spectroscopy (FTIR) spectroscopy at the heart of it, resulting in great versatility. Complementary software has been written for automatic control of the setup and for processing the generated data. Two pollutants, oil and n-octane, are tested to validate the performance of the setup. These validation experiments confirm the usefulness and added value of the setup in general and of the FTIR detection methodology as well. It becomes clear that a system of online measurements with good repeatability, accuracy, and user-friendliness has been created.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000304775300006	Publication Date	2014-07-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2211-0682	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.85	Times cited	15	Open Access
	Notes	; The authors disclosed receipt of the following financial support for the research and/or authorship of this article: This work was supported by a Ph.D. grant (T. Tytgat) funded by the Institute of Innovation by Science and Technology in Flanders (IWT) and by a Ph.D. grant (S. Verbruggen) from the Research Foundation of Flanders (FWO). Other funding was made possible by the University of Antwerp. ;			Approved	Most recent IF: 2.85; 2012 IF: 1.457
	Call Number	UA @ admin @ c:irua:96649			Serial	5935
Permanent link to this record



	Author	Jammaer, J.; Aprile, C.; Verbruggen, S.W.; Lenaerts, S.; Pescarmona, P.P.; Martens, J.A.
	Title	A non-aqueous synthesis of TiO₂SiO₂ composites in supercritical CO₂ for the photodegradation of pollutants			Type	A1 Journal article
	Year	2011	Publication	Chemsuschem	Abbreviated Journal	Chemsuschem
	Volume	4	Issue	10	Pages	1457-1463
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Titania/silica composites with different Ti/Si ratios are synthesized via a nonconventional synthesis route. The synthesis involves non-aqueous reaction of metal alkoxides and formic acid at 75 °C in supercritical carbon dioxide. The as-prepared composite materials contain nanometer-sized anatase crystallites and amorphous silica. Large specific surface areas are obtained. The composites are evaluated in the photocatalytic degradation of phenol in aqueous medium, and in the elimination of acetaldehyde from air. The highest photocatalytic activity in both processes is achieved with a composite containing 40 wt % TiO2.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000296497400010	Publication Date	2011-05-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1864-5631	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.226	Times cited	15	Open Access
	Notes	; The authors acknowledge sponsorship from CECAT and Methusalem (long-term financing of the Flemish government). We thank Dr. E. Gobechiya for assistance with XRD measurements and A. Lemaire for assistance with mercury porosimetry measurements. ;			Approved	Most recent IF: 7.226; 2011 IF: 6.827
	Call Number	UA @ admin @ c:irua:93363			Serial	5973
Permanent link to this record



	Author	Huyskens, C.; Lenaerts, S.; Brauns, E.; Diels, L.; de Wever, H.
	Title	Study of (ir)reversible fouling in MBRs under various operating conditions using new on-line fouling sensor			Type	A1 Journal article
	Year	2011	Publication	Separation and purification technology	Abbreviated Journal	Sep Purif Technol
	Volume	81	Issue	2	Pages	208-215
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	In this study, a new fouling sensor was validated under different conditions of hydraulic (HRT) and sludge retention time (SRT). The MBR-VFM (membrane bioreactor-VITO Fouling Measurement) allows the simultaneous determination of the physically reversible and irreversible fouling potential of a mixed liquor during a single crossflow filtration test. In accordance with the on-line filtration behavior, the measured reversible and irreversible fouling propensities differed significantly between MBRs operated at different combinations of HRT-SRT. Moreover, a significant negative correlation was found between the on-line permeability and the reversible and irreversible fouling propensity measured by the MBR-VFM. This corresponded to observations made on membrane recovery after physical or chemical cleaning actions. Higher reversible and irreversible fouling were observed at lower HRT, presumably as a consequence of increased concentrations of foulants present. The effect of SRT was much smaller and restricted to the reversible fouling component. Possible explanations for the increased fouling at prolonged SRT are the higher sludge and colloid concentration and the smaller floc size. It can be concluded that the MBR-VFM is a useful tool to monitor fluctuations in a mixed liquors (ir)reversible fouling potential and can contribute to a deeper understanding of the occurring fouling phenomena.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000296108500012	Publication Date	2011-08-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1383-5866	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.359	Times cited	15	Open Access
	Notes	; ;			Approved	Most recent IF: 3.359; 2011 IF: 2.921
	Call Number	UA @ admin @ c:irua:93410			Serial	5992
Permanent link to this record



	Author	De Baere, K.; Verstraelen, H.; Rigo, P.; Van Passel, S.; Lenaerts, S.; Potters, G.
	Title	Study on alternative approaches to corrosion protection of ballast tanks using an economic model			Type	A1 Journal article
	Year	2013	Publication	Marine structures	Abbreviated Journal	Mar Struct
	Volume	32	Issue		Pages	1-17
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	One of the most relevant problems in ship construction and maintenance nowadays is corrosion in ballast tanks of modern merchant vessels. On the one hand, there is a general consensus that the economic lifespan of such a vessel depends, to a large degree, upon the corrosion state of its ballast tanks, while on the other hand these ballast tanks, located between the outer hull and the cargo tanks, makes routine inspection and maintenance a difficult task. Today, ship's ballast tanks are usually constructed in steel and protected with an epoxy coating backed up by sacrificial zinc anodes. Such a construction has been applied without significant alterations for many years. The objective of this economic study is to compare this construction method with some potential alternatives. The considered alternatives are: (1) an increase in structural scantlings, eliminating the necessity to replace corroded at a cost of real cargo carrying capacity of the ship, (2) application of the novel and more durable TSCF25 coating (3), the use of corrosion resistant steel in ship construction and (4) a standard PSPC15 coating combined with lifetime lasting aluminum sacrificial anodes. A cost model was used to evaluate these alternative options together with sensitivity analysis. It is concluded that the durable coating and the use of lifetime lasting aluminum anodes are bound to improve the actual basic tank concept. Corrosion resistant steel becomes attractive when the steel price becomes competitive.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000319643500001	Publication Date	2013-03-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0951-8339	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.052	Times cited	15	Open Access
	Notes	; ;			Approved	Most recent IF: 2.052; 2013 IF: 1.242
	Call Number	UA @ admin @ c:irua:109346			Serial	6253
Permanent link to this record



	Author	Blommaerts, N.; Hoeven, N.; Arenas Esteban, D.; Campos, R.; Mertens, M.; Borah, R.; Glisenti, A.; De Wael, K.; Bals, S.; Lenaerts, S.; Verbruggen, S.W.; Cool, P.
	Title	Tuning the turnover frequency and selectivity of photocatalytic CO2 reduction to CO and methane using platinum and palladium nanoparticles on Ti-Beta zeolites			Type	A1 Journal article
	Year	2021	Publication	Chemical Engineering Journal	Abbreviated Journal	Chem Eng J
	Volume	410	Issue		Pages	128234
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL); Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA); AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	A Ti-Beta zeolite was used in gas phase photocatalytic CO2 reduction to reduce the charge recombination rate and increase the surface area compared to P25 as commercial benchmark, reaching 607 m2 g-1. By adding Pt nanoparticles, the selectivity can be tuned toward CO, reaching a value of 92% and a turnover frequency (TOF) of 96 µmol.gcat-1.h-1, nearly an order of magnitude higher in comparison with P25. By adding Pd nanoparticles the selectivity can be shifted from CO (70% for a bare Ti-Beta zeolite), toward CH4 as the prevalent species (60%). In this way, the selectivity toward CO or CH4 can be tuned by either using Pt or Pd. The TOF values obtained in this work outperform reported state-of-the-art values in similar research. The improved activity by adding the nanoparticles was attributed to an improved charge separation efficiency, together with a plasmonic contribution of the metal nanoparticles under the applied experimental conditions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000623394200004	Publication Date	2021-01-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.216	Times cited	15	Open Access	OpenAccess
	Notes	N.B., S.L., S.W.V. and P.C. wish to thank the Flemish government and Catalisti for financial support and coordination in terms of a sprint SBO in the context of the moonshot project D2M. N.H. thanks the Flanders Innovation and Entrepreneurship (VLAIO) for the financial support. The Systemic Physiological and Ecotoxicological Research (SPHERE) group, R. Blust, University of Antwerp is acknowledged for the ICP-MS measurements.			Approved	Most recent IF: 6.216
	Call Number	EMAT @ emat @c:irua:174591			Serial	6662
Permanent link to this record



	Author	Borah, R.; Ninakanti, R.; Nuyts, G.; Peeters, H.; Pedrazo-Tardajos, A.; Nuti, S.; Vande Velde, C.; De Wael, K.; Lenaerts, S.; Bals, S.; Verbruggen, S.
	Title	Selectivity in ligand functionalization of photocatalytic metal oxide nanoparticles for phase transfer and self‐assembly applications			Type	A1 Journal article
	Year	2021	Publication	Chemistry-A European Journal	Abbreviated Journal	Chem-Eur J
	Volume		Issue		Pages	chem.202100029-15
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation); Sustainable Energy, Air and Water Technology (DuEL); Intelligence in PRocesses, Advanced Catalysts and Solvents (iPRACS)
	Abstract	Functionalization of photocatalytic metal oxide nanoparticles of TiO 2 , ZnO, WO 3 and CuO with amine‐terminated (oleylamine) and thiol‐terminated (1‐dodecanethiol) alkyl chained ligands was studied under ambient conditions. A high selectivity was observed in the binding specificity of a ligand towards nanoparticles of these different oxides. It was observed that oleylamine binds stably to only TiO 2 and WO 3 , while 1‐dodecanethiol binds stably only to ZnO and CuO. Similarly, polar to non‐polar solvent phase transfer of TiO 2 and WO 3 nanoparticles could be achieved by using oleylamine, but not by 1‐dodecanethiol, while the contrary holds for ZnO and CuO. The surface chemistry of ligand functionalized nanoparticles was probed by ATR‐FTIR spectroscopy, that enabled to elucidate the occupation of the ligands at the active sites. The photo‐stability of the ligands on the nanoparticle surface was determined by the photocatalytic self‐cleaning properties of the material. While TiO 2 and WO 3 degrade the ligands within 24 hours under both UV and visible light, ligands on ZnO and CuO remain unaffected. The gathered insights are also highly relevant from an application point of view. As an example, since the ligand functionalized nanoparticles are hydrophobic in nature, they can thus be self‐assembled at the air‐water interface, for obtaining nanoparticle films with demonstrated photocatalytic as well as anti‐fogging properties.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000652651400001	Publication Date	2021-04-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0947-6539	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.317	Times cited	15	Open Access	OpenAccess
	Notes	R.B. and S.W.V. acknowledge financial support from the University of Antwerp Special Research Fund (BOF) for a DOCPRO4 doctoral scholarship. S.B. and A.P.-T. acknowledge financial support from the European Commission under the Horizon 2020 Program by means of the grant agreement no. 731019 EUSMI and the ERC Consolidator grant no. 815128 REALNANO.; sygmaSB			Approved	Most recent IF: 5.317
	Call Number	UA @ admin @ c:irua:177495			Serial	6787
Permanent link to this record



	Author	Van Eynde, E.; Tytgat, T.; Smits, M.; Verbruggen, S.W.; Hauchecorne, B.; Lenaerts, S.
	Title	Biotemplated diatom silica-titania materials for air purification			Type	A1 Journal article
	Year	2013	Publication	Photochemical & photobiological sciences	Abbreviated Journal	Photoch Photobio Sci
	Volume	12	Issue	4	Pages	690-695
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	We present a novel manufacture route for silicatitania photocatalysts using the diatom microalga Pinnularia sp. Diatoms self-assemble into porous silica cell walls, called frustules, with periodic micro-, meso- and macroscale features. This unique hierarchical porous structure of the diatom frustule is used as a biotemplate to incorporate titania by a solgel methodology. Important material characteristics of the modified diatom frustules under study are morphology, crystallinity, surface area, pore size and optical properties. The produced biosilicatitania material is evaluated towards photocatalytic activity for NOx abatement under UV radiation. This research is the first step to obtain sustainable, well-immobilised silicatitania photocatalysts using diatoms.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000316572500016	Publication Date	2012-10-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1474-905x; 1474-9092	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.344	Times cited	18	Open Access
	Notes	; ;			Approved	Most recent IF: 2.344; 2013 IF: 2.939
	Call Number	UA @ admin @ c:irua:106625			Serial	5930
Permanent link to this record



	Author	Kovalevsky, A.; Buysse, C.; Snijkers, F.; Buekenhoudt, A.; Luyten, J.; Kretzschmar, J.; Lenaerts, S.
	Title	Oxygen exchange-limited transport and surface activation of Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-\delta capillary membranes			Type	A1 Journal article
	Year	2011	Publication	Journal of membrane science	Abbreviated Journal	J Membrane Sci
	Volume	368	Issue	1/2	Pages	223-232
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Analysis of oxygen permeation fluxes through Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) capillary membranes, fabricated via a phase-inversion spinning technique using polysulfone as binder, showed a significant limiting role of the surface-oxygen exchange kinetics. Within the studied temperature and oxygen partial pressure ranges, the activation of core and shell sides of the BSCF capillary with praseodymium oxide (PrOx) resulted in an increase in permeation rate of about 300%. At 11231223 K the activated BSCF membranes demonstrate almost 3-times lower activation energies for the overall oxygen transport (not, vert, similar35 kJ/mol) than the non-activated capillaries, indicating that the mechanism of oxygen transport through the activated capillaries becomes significantly controlled by bulk diffusion limitations, allowing further improvement of the overall performance by decreasing the wall thickness. XRD, EDS and EPMA studies revealed the formation of (Pr,Ba,Sr)(Co,Fe)O3−δ perovskite-type oxides on the surface of the PrOx-modified membranes, which may be responsible for the drastic increase in oxygen exchange rate. At T > 1123 K both non-activated and activated Ba0.5Sr0.5Co0.8Fe0.2O3−δ membranes demonstrate stable performance with time, while at 1073 K only a small initial decrease in permeation was observed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000286701800027	Publication Date	2010-11-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0376-7388	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.035	Times cited	21	Open Access
	Notes	; This work was supported by the German Helmholtz Alliance Project “MEM-BRAIN”, aiming at the development of gas separation membranes for zero-emission fossil fuel power plants. Experimental assistance of B. Molenberghs, W. Doyen, H. Chen, R. Kemps, M. Mertens, I. Thijs, and W. Bouwen (VITO) is gratefully acknowledged. ;			Approved	Most recent IF: 6.035; 2011 IF: 3.850
	Call Number	UA @ admin @ c:irua:88072			Serial	5975
Permanent link to this record



	Author	Dong, Y.; Chen, S.-Y.; Lu, Y.; Xiao, Y.-X.; Hu, J.; Wu, S.-M.; Deng, Z.; Tian, G.; Chang, G.-G.; Li, J.; Lenaerts, S.; Janiak, C.; Yang, X.-Y.; Su, B.-L.
	Title	Hierarchical MoS₂@TiO₂ heterojunctions for enhanced photocatalytic performance and electrocatalytic hydrogen evolution			Type	A1 Journal article
	Year	2018	Publication	Chemistry: an Asian journal	Abbreviated Journal	Chem-Asian J
	Volume	13	Issue	12	Pages	1609-1615
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Hierarchical MoS2@TiO2 heterojunctions were synthesized through a one-step hydrothermal method by using protonic titanate nanosheets as the precursor. The TiO2 nanosheets prevent the aggregation of MoS2 and promote the carrier transfer efficiency, and thus enhance the photocatalytic and electrocatalytic activity of the nanostructured MoS2. The obtained MoS2@TiO2 has significantly enhanced photocatalytic activity in the degradation of rhodamineB (over 5.2times compared with pure MoS2) and acetone (over 2.8times compared with pure MoS2). MoS2@TiO2 is also beneficial for electrocatalytic hydrogen evolution (26times compared with pure MoS2, based on the cathodic current density). This work offers a promising way to prevent the self-aggregation of MoS2 and provides a new insight for the design of heterojunctions for materials with lattice mismatches.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000435773300011	Publication Date	2018-04-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1861-4728; 1861-471x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.083	Times cited	22	Open Access
	Notes	; This work was supported by the National Key R&D Program of China (2017YFC1103800), PCSIRT (IRT15R52), NSFC (U1662134, U1663225, 51472190, 51611530672, 51503166, 21706199, 21711530705), ISTCP (2015DFE52870), HPNSF (2016CFA033, 2017CFB487), and SKLPPC (PPC2016007). ;			Approved	Most recent IF: 4.083
	Call Number	UA @ admin @ c:irua:151971			Serial	5956
Permanent link to this record



	Author	Caretti, I.; Keulemans, M.; Verbruggen, S.W.; Lenaerts, S.; Van Doorslaer, S.
	Title	Light-induced processes in plasmonic Gold/TiO₂ photocatalysts studied by electron paramagnetic resonance			Type	A1 Journal article
	Year	2015	Publication	Topics in catalysis	Abbreviated Journal	Top Catal
	Volume	58	Issue	12	Pages	776-782
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	X-band and W-band continuous-wave (CW) electron paramagnetic resonance (EPR) was used to study in situ light-induced (LI) mechanisms in commercial P90 titania (90 % anatase/10 % rutile) compared to plasmon-enhanced Au-P90 photocatalyst. These materials were excited using UV and 532 nm visible light to generate different excitation states and distinguish pure charge separation from plasmon-assisted resonance processes. Up to nine different photoinduced species of trapped electrons and holes were identified. LI CW EPR of P90 is presented for the first time, showing a UV excitation response similar to the well-known mixed-phase P25 titania. It is shown that incorporation of Au nanoparticles in Au-P90 and formation of a Schottky junction affects the charge separation state of the catalyst under UV light. Moreover, Au impregnation activated P90 through plasmon hot electron injection under visible light excitation (plasmonic sensitization effect). In general, EPR proved to be crucial to determine the different photoexciation paths and reactions that regulate plasmonic photocatalysis.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000360011200008	Publication Date	2015-08-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1022-5528	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.486	Times cited	22	Open Access
	Notes	; IC and SVD acknowledge the Research Foundation-Flanders (FWO) for financial support (Grant G.0687.13). SV thanks FWO for financial support through a postdoctoral fellowship and MK acknowledges the agency for Innovation by Science and Technology in Flanders (IWT) for financial support (Ph.D. Grant). ;			Approved	Most recent IF: 2.486; 2015 IF: 2.365
	Call Number	UA @ admin @ c:irua:127413			Serial	5968
Permanent link to this record



	Author	Huyskens, C.; De Wever, H.; Fovet, Y.; Wegmann, U.; Diels, L.; Lenaerts, S.
	Title	Screening of novel MBR fouling reducers : benchmarking with known fouling reducers and evaluation of their mechanism of action			Type	A1 Journal article
	Year	2012	Publication	Separation and purification technology	Abbreviated Journal	Sep Purif Technol
	Volume	95	Issue		Pages	49-57
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	A novel fouling characterization method was applied for a first screening of two novel synthetic flocculants developed by BASF (BASF-1 and BASF-2) and benchmarking with six well-known products. Results showed that this MBR-VITO Fouling Measurement (VFM) was able to identify beneficial and adverse effects of different additives on the mixed liquor's reversible and irreversible fouling and, in combination with supporting mixed liquor analyses, allowed to identify the additive's main working mechanism. The first screening tests indicated that BASF-1 and BASF-2 reduced reversible and irreversible fouling to a similar extent as the known synthetic flocculants due to a charge neutralization mechanism, resulting in enhanced flocculation and SMP removal. Further testing at different additive concentrations provided a first indication of the optimal dosage and revealed a considerable risk of overdosing for BASF-2, rendering it less suited for fouling control. In contrast, such adverse effects were not observed for BASF-1. BASF-1 induced similar beneficial effects as the known MPE50 polymer at lower dosage and was therefore considered promising for application in MBRs. (C) 2012 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000307032100008	Publication Date	2012-04-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1383-5866	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.359	Times cited	24	Open Access
	Notes	; The authors would like to thank K. Luyckx, J. Fret, L. Heylen, R. Muyshondt, H. Sterckx, J. Verheyden and J. Vande-Velden for technical assistance and V. Iversen for kindly supplying some of the commercial additives. Celine Huyskens is indebted to the Research Foundation-Flanders (FWO). The European Commission is acknowledged for financial support to Aquafit4use (FP7, Grant 211534). ;			Approved	Most recent IF: 3.359; 2012 IF: 2.894
	Call Number	UA @ admin @ c:irua:101903			Serial	5990
Permanent link to this record



	Author	Blommaerts, N.; Vanrompay, H.; Nuti, S.; Lenaerts, S.; Bals, S.; Verbruggen, S.W.
	Title	Unraveling Structural Information of Turkevich Synthesized Plasmonic Gold-Silver Bimetallic Nanoparticles			Type	A1 Journal article
	Year	2019	Publication	Small	Abbreviated Journal	Small
	Volume	15	Issue	15	Pages	1902791
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	For the synthesis of gold-silver bimetallic nanoparticles, the Turkevich method has been the state-of-the-art method for several decades. It has been presumed that this procedure results in a homogeneous alloy, although this has been debatable for many years. In this work, it is shown that neither a full alloy, nor a perfect core-shell particle is formed but rather a core-shell-like particle with altering metal composition along the radial direction. In-depth wet-chemical experiments are performed in combination with advanced transmission electron microscopy, including EDX tomography, and Finite Element Method modeling to support the observations. From the electron tomography results, the core-shell structure could be clearly visualized and the spatial distribution of gold and silver atoms could be quantified. Theoretical simulations are performed to demonstrate that even though UV-Vis spectra show only one plasmon band, this still originates from core-shell type structures. The simulations also indicate that the core-shell morphology does not so much affect the location of the plasmon band, but mainly results in significant band broadening. Wet-chemistry experiments provide the evidence that the synthesis pathway starts with gold enriched alloy cores, and later on in the synthesis mainly silver is incorporated to end up with a silver enriched alloy shell.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000482637100001	Publication Date	2019-08-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1613-6810	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.643	Times cited	26	Open Access	OpenAccess
	Notes	Universiteit Antwerpen; Fonds Wetenschappelijk Onderzoek, 1S32617N G.0369.15N G.0381.16N ;			Approved	Most recent IF: 8.643
	Call Number	EMAT @ emat @c:irua:161636			Serial	5290
Permanent link to this record



	Author	Liao, T.-W.; Verbruggen, S.; Claes, N.; Yadav, A.; Grandjean, D.; Bals, S.; Lievens, P.
	Title	TiO2 Films Modified with Au Nanoclusters as Self-Cleaning Surfaces under Visible Light			Type	A1 Journal article
	Year	2018	Publication	Nanomaterials	Abbreviated Journal	Nanomaterials-Basel
	Volume	8	Issue	8	Pages	30
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	In this study, we applied cluster beam deposition (CBD) as a new approach for fabricating efficient plasmon-based photocatalytic materials. Au nanoclusters (AuNCs) produced in the gas phase were deposited on TiO2 P25-coated silicon wafers with coverage ranging from 2 to 8 atomic monolayer (ML) equivalents. Scanning Electron Microscopy (SEM) images of the AuNCs modified TiO2 P25 films show that the surface is uniformly covered by the AuNCs that remain isolated at low coverage (2 ML, 4 ML) and aggregate at higher coverage (8 ML). A clear relationship between AuNCs coverage and photocatalytic activity towards stearic acid photo-oxidation was measured, both under ultraviolet and green light illumination. TiO2 P25 covered with 4 ML AuNCs showed the best stearic acid photo-oxidation performance under green light illumination (Formal Quantum Efficiency 1.6 x 10-6 over a period of 93 h). These results demonstrate the large potential of gas-phase AuNCs beam deposition technology for the fabrication of visible light active plasmonic photocatalysts.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000424131600030	Publication Date	2018-01-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2079-4991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.553	Times cited	29	Open Access	OpenAccess
	Notes	The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n 607417 (Catsense). We also thank the Research Foundation—Flanders (FWO, Belgium), the Flemish Concerted Action (BOF KU Leuven, Project No. GOA/14/007) research program, and the microscope was partly funded by the Hercules Fund from the Flemish Government for the support. N.C. and S.B. acknowledge financial support from European Research Council (ERC Starting Grant #335078-COLOURATOM). ECAS_Sara (ROMEO:green; preprint:; postprint:can ; pdfversion:can);			Approved	Most recent IF: 3.553
	Call Number	EMAT @ emat @c:irua:147898UA @ admin @ c:irua:147898			Serial	4805
Permanent link to this record



	Author	Asapu, R.; Ciocarlan, R.-G.; Claes, N.; Blommaerts, N.; Minjauw, M.; Ahmad, T.; Dendooven, J.; Cool, P.; Bals, S.; Denys, S.; Detavernier, C.; Lenaerts, S.; Verbruggen, S.W.
	Title	Plasmonic Near-Field Localization of Silver Core–Shell Nanoparticle Assemblies via Wet Chemistry Nanogap Engineering			Type	A1 Journal article
	Year	2017	Publication	ACS applied materials and interfaces	Abbreviated Journal	Acs Appl Mater Inter
	Volume	9	Issue	9	Pages	41577-41585
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Silver nanoparticles are widely used in the field of plasmonics because of their unique optical properties. The wavelength-dependent surface plasmon resonance gives rise to a strongly enhanced electromagnetic field, especially at so-called hot spots located in the nanogap in-between metal nanoparticle assemblies. Therefore, the interparticle distance is a decisive factor in plasmonic applications, such as surface-enhanced Raman spectroscopy (SERS). In this study, the aim is to engineer this interparticle distance for silver nanospheres using a convenient wet-chemical approach and to predict and quantify the corresponding enhancement factor using both theoretical and experimental tools. This was done by building a tunable ultrathin polymer shell around the nanoparticles using the layer-by-layer method, in which the polymer shell acts as the separating interparticle spacer layer. Comparison of different theoretical approaches and corroborating the results with SERS analytical experiments using silver and silver−polymer core−shell nanoparticle clusters as SERS substrates was also done. Herewith, an approach is provided to estimate the extent of plasmonic near-field enhancement both theoretically as well as experimentally.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000417005900057	Publication Date	2017-11-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1944-8244	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.504	Times cited	29	Open Access	OpenAccess
	Notes	financial support through a research fellowship. C.D. wishes to thank the Hercules foundation for the financial support (SPINAL). P.C. and R.-G.C. acknowledge financial support by FWO Vlaanderen (project no. G038215N). N.C. and S.B. acknowledge the financial support from the European Research Council (ERC starting grant #335078-COLOURATOM). (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); saraecas; ECAS_Sara;			Approved	Most recent IF: 7.504
	Call Number	EMAT @ emat @c:irua:147243			Serial	4804
Permanent link to this record



	Author	Hauchecorne, B.; Tytgat, T.; Verbruggen, S.W.; Hauchecorne, D.; Terrens, D.; Smits, M.; Vinken, K.; Lenaerts, S.
	Title	Photocatalytic degradation of ethylene : an FTIR in situ study under atmospheric conditions			Type	A1 Journal article
	Year	2011	Publication	Applied catalysis : B : environmental	Abbreviated Journal	Appl Catal B-Environ
	Volume	105	Issue	1/2	Pages	111-116
	Keywords	A1 Journal article; Engineering sciences. Technology; Molecular Spectroscopy (MolSpec); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	In this paper, the reaction mechanism of the photocatalytic oxidation of ethylene is elucidated by means of an in-house developed FTIR in situ reactor. This reactor allowed us to look at the catalytic surface at the moment the reactions actually occur. This new approach gave some exciting new insights in how ethylene is photocatalytically oxidised. It was found that there is a change in dipole moment of the ethylene molecule when it is brought in the neighbourhood of the catalyst. From this finding, a hypothesis was formulated on how the CC-bond from ethylene will break. It was found that the aforementioned interaction between the catalyst and the molecule, allows the excited electrons from the UV irradiated catalyst to occupy the lowest unoccupied molecular orbital (LUMO) of the ethylene molecule through a process known as backdonation. Following this hypothesis, it was found that the degradation occurs through the formation of two intermediates: formaldehyde and formic acid, for which formaldehyde is bound in two different ways (coordinatively and as bidentate). Finally CO2 and H2O are found as end products, resulting in the complete mineralisation of the pollutant.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000291907400013	Publication Date	2011-04-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-3373	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.446	Times cited	29	Open Access
	Notes	; The authors wish to thank the University of Antwerp for the funding of this research; Evonik, who delivered the photocatalyst and the 3rd grade bachelor students of the bio-science engineering department, who accompanied us in this work: Britt Berghmans, Margot Goossens, Ozlem Kocak and Laurent Van Linden. ;			Approved	Most recent IF: 9.446; 2011 IF: 5.625
	Call Number	UA @ admin @ c:irua:89256			Serial	5978
Permanent link to this record



	Author	Blommaerts, N.; Asapu, R.; Claes, N.; Bals, S.; Lenaerts, S.; Verbruggen, S.W.
	Title	Gas phase photocatalytic spiral reactor for fast and efficient pollutant degradation			Type	A1 Journal article
	Year	2017	Publication	Chemical engineering journal	Abbreviated Journal	Chem Eng J
	Volume	316	Issue	316	Pages	850-856
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Photocatalytic reactors for the degradation of gaseous organic pollutants often suffer from major limitations such as small reaction area, sub-optimal irradiation conditions and thus limited reaction rate. In this work, an alternative solution is presented that involves a glass tube coated on the inside with (silvermodified) TiO2 and spiraled around a UVA lamp. First, the spiral reactor is coated from the inside with TiO2 using an experimentally verified procedure that is optimized toward UV light transmission. This procedure is kept as simple as possible and involves a single casting step of a 1 wt% suspension of TiO2 in ethanol through the spiral. This results in a coated tube that absorbs nearly all incident UV light under the experimental conditions used. The optimized coated spiral reactor is then benchmarked to a conventional annular photoreactor of the same outer dimensions and total catalyst loading over a broad range of experimental conditions. Although residence time distribution experiments indicate slightly longer dwelling of molecules in the spiral reactor, no significant difference in by-passing of gas between the spiral reactor and the annular reactor can be claimed. Acetaldehyde degradation efficiency of 100% is obtained with the spiral reactor for a residence time as low as 60 s, whereas the annular reactor could not achieve full degradation even at 1000 s residence time. In a final case study, addition of long-term stable silver nanoparticles, protected by an ultra-thin polymer shell applied via the layer-by-layer (LbL) method, to the spiral reactor coating is shown to double the degradation efficiency and provides an interesting strategy to cope with higher pollutant concentrations without changing the overall dimensions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000398985200089	Publication Date	2017-02-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.216	Times cited	30	Open Access	OpenAccess
	Notes	N.B. wishes to thank the University of Antwerp – Belgium for financial support. N.C. and S.B. acknowledge financial support from European Research Council (ERC Starting Grant #335078- COLOURATOM). S.W.V. acknowledges the Research Foundation – Flanders (FWO) for a postdoctoral fellowship. (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot); ecas_sara			Approved	Most recent IF: 6.216
	Call Number	EMAT @ emat @ c:irua:140925UA @ admin @ c:irua:140925			Serial	4481
Permanent link to this record



	Author	Verbruggen, S.W.; Lenaerts, S.; Denys, S.
	Title	Analytic versus CFD approach for kinetic modeling of gas phase photocatalysis			Type	A1 Journal article
	Year	2015	Publication	Chemical engineering journal	Abbreviated Journal	Chem Eng J
	Volume	262	Issue		Pages	1-8
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	In this work two methods for determining the LangmuirHinshelwood kinetic parameters for a slit-shaped flat bed photocatalytic reactor are compared: an analytic mass transfer based model adapted from literature and a computational fluid dynamics (CFD) approach that was used in conjunction with a simplex optimization routine. Despite the differences between both approaches, similar values for the kinetic parameters and similar trends in terms of their UV intensity dependence were found. Using an effectiveness-NTU (number of transfer units) approach, the analytic mass transfer based method could quantify the relative contributions of the rate limiting steps through a reaction effectiveness parameter. The numeric CFD approach on the other hand could yield the two kinetic parameters that determine the photocatalytic reaction rate simultaneously. Furthermore, it proved to be more accurate as it accounts for the spatial variation of flow rate, reaction rate and concentrations at the surface of the photocatalyst. We elaborate this dual kinetic analysis with regard to the photocatalytic degradation of acetaldehyde in air over a silicon wafer coated with a layer of TiO2 P25 (Evonik) and study the usefulness and limitations of both strategies.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000347577700001	Publication Date	2014-09-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947; 1873-3212	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.216	Times cited	30	Open Access
	Notes	; S.W.V. acknowledges the Research Foundation of Flanders (FWO) for financial support. ;			Approved	Most recent IF: 6.216; 2015 IF: 4.321
	Call Number	UA @ admin @ c:irua:119724			Serial	5927
Permanent link to this record



	Author	Asapu, R.; Claes, N.; Ciocarlan, R.-G.; Minjauw, M.; Detavernier, C.; Cool, P.; Bals, S.; Verbruggen, S.W.
	Title	Electron Transfer and Near-Field Mechanisms in Plasmonic Gold-Nanoparticle-Modified TiO₂Photocatalytic Systems			Type	A1 Journal article
	Year	2019	Publication	ACS applied nano materials	Abbreviated Journal	ACS Appl. Nano Mater.
	Volume	2	Issue	2	Pages	4067-4074
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The major mechanism responsible for plasmonic enhancement of titanium dioxide photocatalysis using gold nanoparticles is still under contention. This work introduces an experimental strategy to disentangle the significance of the charge transfer and near-field mechanisms in plasmonic photocatalysis. By controlling the thickness and conductive nature of a nanoparticle shell that acts as a spacer layer separating the plasmonic metal core from the TiO2 surface, field enhancement or charge transfer effects can be selectively repressed or evoked. Layer-by-layer and in situ polymerization methods are used to synthesize gold core–polymer shell nanoparticles with shell thickness control up to the sub-nanometer level. Detailed optical and electrical characterization supported by near-field simulation models corroborate the trends in photocatalytic activity of the different systems. This approach mainly points at an important contribution of the enhanced near field.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000477917700006	Publication Date	2019-05-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2574-0970	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	32	Open Access	OpenAccess
	Notes	This work was supported by Research Foundation Flanders (FWO). P.C. and R-G.C. acknowledge financial support from FWO (Project No. G038215N). N.C. and S.B. acknowledge financial support from the European Research Council (ERC Starting Grant No. 335078-COLOURATOM).			Approved	Most recent IF: NA
	Call Number	EMAT @ emat @UA @ admin @ c:irua:160579			Serial	5184
Permanent link to this record



	Author	Buysse, C.; Kovalevsky, A.; Snijkers, F.; Buekenhoudt, A.; Mullens, S.; Luyten, J.; Kretzschmar, J.; Lenaerts, S.
	Title	Development, performance and stability of sulfur-free, macrovoid-free BSCF capillaries for high temperature oxygen separation from air			Type	A1 Journal article
	Year	2011	Publication	Journal of membrane science	Abbreviated Journal	J Membrane Sci
	Volume	372	Issue	1/2	Pages	239-248
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Capture and storage of CO2 (CCS) from fossil-fuel power plants is vital in order to counteract a pending anthropogenic global warming. High temperature oxygen transport perovskite membranes can fulfill an important role in the separation of oxygen from air needed in the oxy-fuel technologies for CCS. In this study we present the development, performance and stability of gastight, macrovoid-free and sulfur-free Ba0.5Sr0.5Co0.8Fe0.2O3 − δ (BSCF) mixed conductor capillary membranes prepared by phase-inversion spinning and sintering. A sulfur-free phase-inversion polymer was chosen in order to obtain a phase-pure BSCF crystal phase. Special attention was given to the polymer solution and ceramic spinning suspension in order to avoid macrovoids and achieve gastight membranes. The sulfur-free BSCF capillaries showed an average 4-point bending strength of 64 ± 8 MPa and a maximum oxygen flux of not, vert, similar5.3 Nml/(cm2 min) at 950 °C for an argon sweep flow rate of 125 Nml/min. The comparison of the performance of sulfur-free and sulfur-containing BSCF capillaries with similar dimensions revealed a profound impact of the sulfur contamination on both the oxygen flux and the activation energy of the overall oxygen transport mechanism. Both long-term oxygen permeation at different temperatures and post-operation analysis of a sulfur-free BSCF capillary were performed and discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000289829200026	Publication Date	2011-02-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0376-7388	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.035	Times cited	32	Open Access
	Notes	; The authors want to express their thanks to the VITO staff for their continuous support, especially B. Molenberghs, W. Doyen, H. Beckers, R. Kemps, M. Mertens, M. Schoeters and H. Chen. C. Buysse thankfully acknowledges a PhD scholarship provided by VITO and the University of Antwerp. This work is performed in the framework of the German Helmholtz Alliance Project “MEM-BRAIN”, aiming at the development of gas separation membranes for zero-emission fossil fuel power plants. ;			Approved	Most recent IF: 6.035; 2011 IF: 3.850
	Call Number	UA @ admin @ c:irua:89916			Serial	5942
Permanent link to this record



	Author	Verbruggen, S.W.; Masschaele, K.; Moortgat, E.; Korany, T.E.; Hauchecorne, B.; Martens, J.A.; Lenaerts, S.
	Title	Factors driving the activity of commercial titanium dioxide powders towards gas phase photocatalytic oxidation of acetaldehyde			Type	A1 Journal article
	Year	2012	Publication	Catalysis science & technology	Abbreviated Journal	Catal Sci Technol
	Volume	2	Issue	11	Pages	2311-2318
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The photocatalytic activity of two commercial titanium dioxide powders (Cristal Global, Millennium PC500 and Evonik, P25) is compared towards acetaldehyde degradation in the gas phase. In contrast to the extensive literature available, we found a higher activity for the PC500 than for the P25 coating. Here, we present a comprehensive characterization of the bulk and surface properties of both powders. Our comparison shows that the material properties that dominate the overall photocatalytic activity in gas phase differ from those required for the photodegradation of water-borne pollutants.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000310863900020	Publication Date	2012-06-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2044-4753; 2044-4761	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.773	Times cited	33	Open Access
	Notes	; S.W.V. acknowledges the Research Foundation of Flanders (FWO) for the financial support. J.A.M acknowledges long term funding (Methusalem). ;			Approved	Most recent IF: 5.773; 2012 IF: 3.753
	Call Number	UA @ admin @ c:irua:105162			Serial	5952
Permanent link to this record



	Author	Verbruggen, S.W.; Deng, S.; Kurttepeli, M.; Cott, D.J.; Vereecken, P.M.; Bals, S.; Martens, J.A.; Detavernier, C.; Lenaerts, S.
	Title	Photocatalytic acetaldehyde oxidation in air using spacious TiO₂ films prepared by atomic layer deposition on supported carbonaceous sacrificial templates			Type	A1 Journal article
	Year	2014	Publication	Applied catalysis : B : environmental	Abbreviated Journal	Appl Catal B-Environ
	Volume	160	Issue		Pages	204-210
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Supported carbon nanosheets and carbon nanotubes served as sacrificial templates for preparing spacious TiO2 photocatalytic thin films. Amorphous TiO2 was deposited conformally on the carbonaceous template material by atomic layer deposition (ALD). Upon calcination at 550 °C, the carbon template was oxidatively removed and the as-deposited continuous amorphous TiO2 layers transformed into interlinked anatase nanoparticles with an overall morphology commensurate to the original template structure. The effect of type of template, number of ALD cycles and gas residence time of pollutant on the photocatalytic activity, as well as the stability of the photocatalytic performance of these thin films was investigated. The TiO2 films exhibited excellent photocatalytic activity toward photocatalytic degradation of acetaldehyde in air as a model reaction for photocatalytic indoor air pollution abatement. Optimized films outperformed a reference film of commercial PC500.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000340687900024	Publication Date	2014-05-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-3373;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.446	Times cited	37	Open Access	OpenAccess
	Notes	335078 Colouratom; Iap-Pai P7/05; Fwo; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot);			Approved	Most recent IF: 9.446; 2014 IF: 7.435
	Call Number	UA @ lucian @ c:irua:117094			Serial	2608
Permanent link to this record



	Author	Buysse, C.; Kovalevsky, A.; Snijkers, F.; Buekenhoudt, A.; Mullens, S.; Luyten, J.; Kretzschmar, J.; Lenaerts, S.
	Title	Fabrication and oxygen permeability of gastight, macrovoid-free Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-\delta capillaries for high temperature gas separation			Type	A1 Journal article
	Year	2010	Publication	Journal of membrane science	Abbreviated Journal	J Membrane Sci
	Volume	359	Issue	1-2	Pages	86-92
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Oxygen-permeable perovskites with mixed ionic-electronic conducting properties can play an important role in the separation of oxygen from air which is needed in the oxy-fuel and pre-combustion technologies for the removal and capture of CO2. In this work, gastight, macrovoid-free Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) capillaries were successfully shaped by a phase-inversion spinning technique, followed by calcination and sintering. It was found that both the rheology of the ceramic suspension and the composition of bore liquid and coagulation bath are key factors for making macrovoid-free green capillaries. Gastight BSCF capillaries were obtained by sintering for 5 h at 1100 °C. The sintered BSCF capillaries contained a significant amount of BaSO4 due to a reaction with the polysulfone binder during calcination. The oxygen permeation flux through the BSCF capillaries was measured and compared to literature data on BSCF disk and hollow fiber membranes measured in similar conditions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000279953300010	Publication Date	2009-10-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0376-7388	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.035	Times cited	38	Open Access
	Notes	; The authors want to express their thanks to the VITO personnel for their continuous support, especially B. Molenberghs, W. Doyen, H. Beckers (Separation and Conversion Technology, VITO), R. Kemps, M. Mertens, I. Thijs, M. Schoeters, W. Bouwen and J. Cooymans (Materials Department, VITO). C. Buysse thankfully acknowledges a PhD scholarship provided by VITO and the University of Antwerp. This work is performed in the framework of the German Helmholtz Alliance Project “MEM-BRAIN”, aiming at the development of gas separation membranes for zero-emission fossil fuel power plants. ;			Approved	Most recent IF: 6.035; 2010 IF: 3.673
	Call Number	UA @ admin @ c:irua:82008			Serial	5950
Permanent link to this record



	Author	Verbruggen, S.W.; Ribbens, S.; Tytgat, T.; Hauchecorne, B.; Smits, M.; Meynen, V.; Cool, P.; Martens, J.A.; Lenaerts, S.
	Title	The benefit of glass bead supports for efficient gas phase photocatalysis : case study of a commercial and a synthesised photocatalyst			Type	A1 Journal article
	Year	2011	Publication	Chemical engineering journal	Abbreviated Journal	Chem Eng J
	Volume	174	Issue	1	Pages	318-325
	Keywords	A1 Journal article; Engineering sciences. Technology; Laboratory of adsorption and catalysis (LADCA); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	In the field of photocatalytic air purification, the immobilisation of catalyst particles on support surfaces without loss of photon efficiency is an important challenge. Therefore, an immobilisation method involving a one-step suspension coating of pre-synthesised photocatalysts on glass beads was applied. The various benefits are exemplified in the gas phase photodegradation of ethylene. Coating of glass beads is easy, fast, cheap and offers a more efficient alternative to bulk catalyst pellets. Furthermore, this coating procedure allows to use porous, pre-synthesised catalysts to their full potential, as the surface area and morphology of the initial powder is barely altered after coating, in strong contrast to pelletising. With this technique it became possible to study the gas phase photocatalytic activity of commercial titanium dioxide, trititanate nanotubes and mixed phase anatase/trititanate nanotubes in a packed bed reactor towards the degradation of ethylene without changing the catalyst properties. Coating of glass beads with the photocatalyst revealed the superior activity of the as-prepared nanotubes, compared to TiO2 Aerolyst® 7710 in gaseous phase.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000296950300041	Publication Date	2011-09-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947; 1873-3212	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.216	Times cited	39	Open Access
	Notes	; The author wishes to acknowledge the Research Foundation of Flanders (FWO) for the financial support. Evonik is greatly thanked for supplying the TiO<INF>2</ INF> Aerolyst (R) 7710 pellets. ;			Approved	Most recent IF: 6.216; 2011 IF: 3.461
	Call Number	UA @ admin @ c:irua:93364			Serial	5929
Permanent link to this record



	Author	Smits, M.; Chan, C. kit; Tytgat, T.; Craeye, B.; Costarramone, N.; Lacombe, S.; Lenaerts, S.
	Title	Photocatalytic degradation of soot deposition : self-cleaning effect on titanium dioxide coated cementitious materials			Type	A1 Journal article
	Year	2013	Publication	Chemical engineering journal	Abbreviated Journal	Chem Eng J
	Volume	222	Issue		Pages	411-418
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Diesel soot emissions deteriorate the appearance of architectural building materials by soot fouling. This soot deposition devalue the aesthetic value of the building. A solution to counteract this problem is applying titanium dioxide on building materials. TiO2 can provide air-purifying and self-cleaning properties due to its photocatalytic activity. In literature, photocatalytic soot oxidation is observed on glass or silicon substrates. However, degradation of soot by photocatalysis was not yet investigated on cementitious samples (mortar, concrete) although it is one of the most frequently used building materials. In this study, photocatalytic soot oxidation by means of TiO2 coated cementitious samples is addressed. The soot removal capacity of four types of TiO2 layers, coated on mortar samples, is evaluated by means of two detection methods. The first method is based on colorimetric measurements, while the second method uses digital image processing to calculate the area of soot coverage. The experimental data revealed that cementitious materials coated with commercially available TiO2 exhibited self-cleaning properties as it was found that all coated samples were able to remove soot. The P25 coating gave the best soot degradation performance, while the Eoxolit product showed the slowest soot degradation rate. In addition, gas chromatography measurements in a closed chamber experiment with P25 confirmed that complete mineralization of about 60% of the soot was obtained within 24 hours since CO2 was the sole observed oxidation product. Due to its realistic approach, this study proves that photocatalytic soot removal on TiO2 coated cementitious surfaces is possible in practice, which is an important step towards the practical application of self-cleaning building materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000319528900046	Publication Date	2013-03-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1385-8947; 1873-3212	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.216	Times cited	43	Open Access
	Notes	; This work was supported by a PhD grant (M. Smits) from the University of Antwerp, a PhD grant (T. Tytgat) funded by the Institute of Innovation by Science and Technology in Flanders (IWT) and the exchange program Tournesol (Project T2012.05) financed by the Flemish government. ;			Approved	Most recent IF: 6.216; 2013 IF: 4.058
	Call Number	UA @ admin @ c:irua:106519			Serial	5979
Permanent link to this record



	Author	Deng, S.; Verbruggen, S.W.; He, Z.; Cott, D.J.; Vereecken, P.M.; Martens, J.A.; Bals, S.; Lenaerts, S.; Detavernier, C.
	Title	Atomic layer deposition-based synthesis of photoactive TiO₂ nanoparticle chains by using carbon nanotubes as sacrificial templates			Type	A1 Journal article
	Year	2014	Publication	RSC advances	Abbreviated Journal	Rsc Adv
	Volume	4	Issue	23	Pages	11648-11653
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Highly ordered and self supported anatase TiO2 nanoparticle chains were fabricated by calcining conformally TiO2 coated multi-walled carbon nanotubes (MWCNTs). During annealing, the thin tubular TiO2 coating that was deposited onto the MWCNTs by atomic layer deposition (ALD) was transformed into chains of TiO2 nanoparticles ([similar]12 nm diameter) with an ultrahigh surface area (137 cm2 per cm2 of substrate), while at the same time the carbon from the MWCNTs was removed. Photocatalytic tests on the degradation of acetaldehyde proved that these forests of TiO2 nanoparticle chains are highly photoactive under UV light because of their well crystallized anatase phase.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000332470000017	Publication Date	2014-02-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2046-2069;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.108	Times cited	45	Open Access	Not_Open_Access
	Notes	; The authors wish to thank the Research Foundation – Flanders (FWO) and UGENT-GOA-01G01513 for financial support. The authors acknowledge the European Research Council for funding under the European Union's Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement no. 239865-COCOON and no. 246791-COUNTATOMS. JAM acknowledges the Flemish government for long-term structural funding (Methusalem). ;			Approved	Most recent IF: 3.108; 2014 IF: 3.840
	Call Number	UA @ lucian @ c:irua:117298			Serial	168
Permanent link to this record



	Author	Asapu, R.; Claes, N.; Bals, S.; Denys, S.; Detavernier, C.; Lenaerts, S.; Verbruggen, S.W.
	Title	Silver-polymer core-shell nanoparticles for ultrastable plasmon-enhanced photocatalysis			Type	A1 Journal article
	Year	2017	Publication	Applied catalysis : B : environmental	Abbreviated Journal	Appl Catal B-Environ
	Volume	200	Issue	200	Pages	31-38
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Affordable silver-polymer core-shell nanoparticles are prepared using the layer-by-layer (LbL) technique. The metallic silver core is encapsulated with an ultra-thin protective shell that prevents oxidation and clustering without compromising the plasmonic properties. The core-shell nanoparticles retain their plasmonic near field enhancement effect, as studied from finite element numerical simulations. Control over the shell thickness up to the sub-nanometer level is there for key. The particles are used to prepare a plasmonic Ag-TiO2 photocatalyst of which the gas phase photocatalytic activity is monitored over a period of four months. The described system outperforms pristine TiO2 and retains its plasmonic enhancement in contrast to TiO2 modified with bare silver nanoparticles. With this an important step is made toward the development of long-term stable plasmonic (photocatalytic) applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000384775600004	Publication Date	2016-06-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-3373	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.446	Times cited	45	Open Access	OpenAccess
	Notes	CD, SL and SWV acknowledge the Research Foundation − Flanders (FWO) for financial support. CD further acknowledges BOF-UGent (GOA 01G01513) and the Hercules Foundation (AUGE/09/014). SB acknowledges the European Research Council for the ERC Starting Grant #335078-COLOURATOM.; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot);			Approved	Most recent IF: 9.446
	Call Number	c:irua:134384 c:irua:134384UA @ admin @ c:irua:134384			Serial	4104
Permanent link to this record



	Author	Hauchecorne, B.; Terrens, D.; Verbruggen, S.; Martens, J.A.; van Langenhove, H.; Demeestere, K.; Lenaerts, S.
	Title	Elucidating the photocatalytic degradation pathway of acetaldehyde : an FTIR in situ study under atmospheric conditions			Type	A1 Journal article
	Year	2011	Publication	Applied catalysis : B : environmental	Abbreviated Journal	Appl Catal B-Environ
	Volume	106	Issue	3/4	Pages	630-638
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	In this paper, new insights of the photocatalytic oxidation pathway of acetaldehyde are obtained by means of an in-house constructed FTIR in situ reactor. It is shown that there are generally three different intermediates present: acetic acid, formic acid and formaldehyde. By means of FTIR in situ spectroscopy, this study revealed that these intermediates are bound on the TiO2 surface in different ways, resulting in the presence of more intermediate species, such as molecularly adsorbed acetic acid, bidentate acetate, molecularly adsorbed formic acid, monodentate formate, bidentate formate, formaldehyde and dioxymethylene. Furthermore, spectroscopic evidence is obtained concerning the formation of 3-hydroxybutanal and crotonaldehyde upon adsorption of acetaldehyde on TiO2 prior to UV illumination. The presented results thus give new insights in the photocatalytic oxidation pathway of acetaldehyde.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000294092400042	Publication Date	2011-06-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-3373	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.446	Times cited	46	Open Access
	Notes	; The authors wish to thank the University of Antwerp for the funding of this research. ;			Approved	Most recent IF: 9.446; 2011 IF: 5.625
	Call Number	UA @ admin @ c:irua:92433			Serial	5948
Permanent link to this record