| Home | << 1 2 3 >> |
|
| Records | |||||
|---|---|---|---|---|---|
| Author | Colla, M.-S.; Wang, B.; Idrissi, H.; Schryvers, D.; Raskin, J.-P.; Pardoen, T. | ||||
Title  |
High strength-ductility of thin nanocrystalline palladium films with nanoscale twins : on-chip testing and grain aggregate model | Type | A1 Journal article | ||
| Year | 2012 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 60 | Issue | 4 | Pages | 1795-1806 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The mechanical behaviour of thin nanocrystalline palladium films with an ∼30 nm in plane grain size has been characterized on chip under uniaxial tension. The films exhibit a large strain hardening capacity and a significant increase in the strength with decreasing thickness. Transmission electron microscopy has revealed the presence of a moderate density of growth nanotwins interacting with dislocations. A semi-analytical grain aggregate model is proposed to investigate the impact of different contributions to the flow behaviour, involving the effect of twins, of grain size and of the presence of a thin surface layer. This model provides guidelines to optimizing the strength/ductility ratio of the films. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000301989500035 | Publication Date | 2012-02-02 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 38 | Open Access | |
| Notes | Iap | Approved | Most recent IF: 5.301; 2012 IF: 3.941 | ||
| Call Number | UA @ lucian @ c:irua:94213 | Serial | 1465 | ||
| Permanent link to this record | |||||
| Author | Choisez, L.; Ding, L.; Marteleur, M.; Idrissi, H.; Pardoen, T.; Jacques, P.J. | ||||
| Title |
High temperature rise dominated cracking mechanisms in ultra-ductile and tough titanium alloy | Type | A1 Journal article | ||
| Year | 2020 | Publication | Nature Communications | Abbreviated Journal | Nat Commun |
| Volume | 11 | Issue | 1 | Pages | 2110 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Extensive use of titanium alloys is partly hindered by a lack of ductility, strain hardening, and fracture toughness. Recently, several beta -metastable titanium alloys were designed to simultaneously activate both transformation-induced plasticity and twinning-induced plasticity effects, resulting in significant improvements to their strain hardening capacity and resistance to plastic localization. Here, we report an ultra-large fracture resistance in a Ti-12Mo alloy (wt.%), that results from a high resistance to damage nucleation, with an unexpected fracture phenomenology under quasi-static loading. Necking develops at a large uniform true strain of 0.3 while fracture initiates at a true fracture strain of 1.0 by intense through-thickness shear within a thin localized shear band. Transmission electron microscopy reveals that dynamic recrystallization occurs in this band, while local partial melting is observed on the fracture surface. Shear band temperatures of 1250-2450 degrees C are estimated by the fusible coating method. The reported high ductility combined to the unconventional fracture process opens alternative avenues toward Ti alloys toughening. Specific titanium alloys combine transformation-induced plasticity and twinning-induced plasticity for improved work hardening. Here, the authors show that these alloys also have an ultra-large fracture resistance and an unexpected fracture mechanism via dynamic recrystallization and local melting in a deformation band. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000558816700010 | Publication Date | 2020-04-30 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2041-1723 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 16.6 | Times cited | 1 | Open Access | OpenAccess |
| Notes | ; The Fonds National de Recherche Scientifique FNRS is gratefully acknowledged for the grant no. T.0127.19, the research grant of L.C. and the research mandate of H.I. The authors are thankful to J. Adrien and E. Maire for their help with the X-ray tomography analysis, to J.D. Embury for the fruitful discussions and to F. Prima for provisioning the material. ; | Approved | Most recent IF: 16.6; 2020 IF: 12.124 | ||
| Call Number | UA @ admin @ c:irua:171318 | Serial | 6536 | ||
| Permanent link to this record | |||||
| Author | Ghidelli, M.; Idrissi, H.; Gravier, S.; Blandin, J.-J.; Raskin, J.-P.; Schryvers, D.; Pardoen, T. | ||||
| Title |
Homogeneous flow and size dependent mechanical behavior in highly ductile Zr 65 Ni 35 metallic glass films | Type | A1 Journal article | ||
| Year | 2017 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 131 | Issue | 131 | Pages | 246-259 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Motivated by recent studies demonstrating a high strength – high ductility potential of nano-scale metallic glass samples, the mechanical response of freestanding Zr65Ni35 film with sub-micron thickness has been investigated by combining advanced on-chip tensile testing and electron microscopy. Large deformation up to 15% is found for specimen thicknesses below 500 nm with variations depending on specimen size and frame compliance. The deformation is homogenous until fracture, with no evidence of shear banding. The yield stress is doubled when decreasing the specimen cross-section, reaching ~3 GPa for small cross-sections. The fracture strain variation is related to both the stability of the test device and to the specimen size. The study concludes on clear disconnect between the mechanisms controlling the onset of plasticity and the fracture process. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000402343400023 | Publication Date | 2017-03-31 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 42 | Open Access | OpenAccess |
| Notes | This work has been funded by the Belgian Science Policy through the IAP 7/21 project. We acknowledge IDS-FunMat for the PhD financial support.We thank the Renatech network and the PTA (Plateforme Technologique Amont) in Grenoble (France) for TFMG deposition facilities. The WINFAB infrastructure at the UCL and the help of R. Vayrette and M. Coulombier for the on-chip tests. H. Idrissi is currently mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). | Approved | Most recent IF: 5.301 | ||
| Call Number | EMAT @ emat @ c:irua:142642 | Serial | 4562 | ||
| Permanent link to this record | |||||
| Author | Idrissi, H.; Samaee, V.; Lumbeeck, G.; Werf, T.; Pardoen, T.; Schryvers, D.; Cordier, P. | ||||
| Title |
In Situ Quantitative Tensile Testing of Antigorite in a Transmission Electron Microscope | Type | A1 Journal article | ||
| Year | 2020 | Publication | Journal Of Geophysical Research-Solid Earth | Abbreviated Journal | J Geophys Res-Sol Ea |
| Volume | 125 | Issue | 3 | Pages | |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The determination of the mechanical properties of serpentinites is essential toward the understanding of the mechanics of faulting and subduction. Here we present the first in situ tensile tests on antigorite in a transmission electron microscope. A push‐to‐pull deformation device is used to perform quantitative tensile tests, during which force and displacement are measured, while the evolving microstructure is imaged with the microscope. The experiments have been performed at room temperature on 2 × 1 × 0.2 μm3 beams prepared by focused ion beam. The specimens are not single crystals despite their small sizes. Orientation mapping indicated that several grains were well oriented for plastic slip. However, no dislocation activity has been observed even though the engineering tensile stress went up to 700 MPa. We show also that antigorite does not exhibit a purely elastic‐brittle behavior since, despite the presence of defects, the specimens accumulate permanent deformation and did not fail within the elastic regime. Instead, we observe that strain localizes at grain boundaries. All observations concur to show that under these experimental conditions, grain boundary sliding is the dominant deformation mechanism. This study sheds a new light on the mechanical properties of antigorite and calls for further studies on the structure and properties of grain boundaries in antigorite and more generally in phyllosilicates. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000530895800023 | Publication Date | 2020-02-20 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2169-9313 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.9 | Times cited | Open Access | OpenAccess | |
| Notes | We thank S. Guillot for having kindly provided us with the two antigorite samples investigated in this study. We acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program under Grant Agreement 787198—TimeMan. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR‐FNRS). We acknowledge fruitful discussions with A. Baronnet. We thank J. Gasc and an anonymous reviewer for their critical comments. Data (movies of the three in situ deformation experiments) can be downloaded (from https://doi.org/10.5281/zenodo.3583135). | Approved | Most recent IF: 3.9; 2020 IF: 3.35 | ||
| Call Number | EMAT @ emat @c:irua:167594 | Serial | 6355 | ||
| Permanent link to this record | |||||
| Author | Boulay, E.; Ragoen, C.; Idrissi, H.; Schryvers, D.; Godet, S. | ||||
| Title |
Influence of amorphous phase separation on the crystallization behavior of glass-ceramics in the BaO-TiO2-SiO2 system | Type | A1 Journal article | ||
| Year | 2014 | Publication | Journal of non-crystalline solids | Abbreviated Journal | J Non-Cryst Solids |
| Volume | 384 | Issue | Pages | 61-72 | |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The possible role of a prior amorphous phase separation on the subsequent crystallization has been the topic of vigorous debates over the last decades and has not yet been clarified, especially regarding the role of the interfaces created by the phase separation. This study proposes to focus on the interplay between a prior amorphous phase separation and the crystallization of fresnoite in the BaO-TiO2-SiO2 system. The crystallization behavior of a non-stoichiometric composition inside the miscibility gap (called APS) is compared with the stoichiometric composition (called FRES) and a non-stoichiometric composition outside the miscibility gap (called NoAPS). The crystallization mechanisms are compared using differential thermal analysis (DTA) by calculating the Avrami parameters and the activation energies as a function of the particle size. The DTA study shows that the two non-stoichiometric compositions exhibit a pronounced surface crystallization behavior whereas FRES undergoes bulk nucleation. This is supported by a multi-scale microstructure characterization. Furthermore, this study demonstrates that the amorphous phase separation and the associated interfaces do not play any significant role in the nucleation step. Moreover, transmission electron microscope (TEM) and local orientation measurements show that the growth of the dendrites is not hindered by the SiO2-rich droplets. The final stage of crystallization of APS is tentatively explained by two composition effects that must be further investigated: the viscosity effect and the formation of a eutectic. (C) 2013 Elsevier B.V. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Amsterdam | Editor | ||
| Language | Wos | 000329422400010 | Publication Date | 2013-07-24 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0022-3093; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.124 | Times cited | 10 | Open Access | |
| Notes | Approved | Most recent IF: 2.124; 2014 IF: 1.766 | |||
| Call Number | UA @ lucian @ c:irua:114782 | Serial | 1614 | ||
| Permanent link to this record | |||||
| Author | Miotti Bettanini, A.; Ding, L.; Mithieux, J.-D.; Parrens, C.; Idrissi, H.; Schryvers, D.; Delannay, L.; Pardoen, T.; Jacques, P.J. | ||||
| Title |
Influence of M23C6 dissolution on the kinetics of ferrite to austenite transformation in Fe-11Cr-0.06C stainless steel | Type | A1 Journal article | ||
| Year | 2019 | Publication | Materials & design | Abbreviated Journal | Mater Design |
| Volume | 162 | Issue | Pages | 362-374 | |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The design of high-strength martensitic stainless steels requires an accurate control over the stability of undesired phases, like carbides and ferrite, which can hamper strength and ductility. Here, the ferrite to austenite transformation in Fe-11Cr-0.06C has been studied with a combined experimental-modelling approach. Experimental observations of the austenization process indicate that austenite growth proceeds in multiple steps, each one characterized by a different transformation rate. DICTRA based modelling reveals that the dissolution of the M23C6 Cr-rich carbides leads to Cr partitioning between austenite and parent phases, which controls the rate of transformation through (i) a soft-impingement effect and (ii) consequent stabilization of the ferrite, which remains untransformed inside chromium-enriched-zones even after prolonged austenization stage. Slow heating rate and smaller initial particle sizes allow the design of ferrite-free microstructure. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000454128400036 | Publication Date | 2018-12-06 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0264-1275 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.364 | Times cited | 3 | Open Access | OpenAccess |
| Notes | The authors thank Professor Anne-Francoise Gourgues-Lorenzon and Helene Godin, Ecole Nationale Superiore des Mines de Paris (MINES ParisTech) for their fruitful discussions. AMB thanks Stijn Van den broek (Universiteit Antwerpen) for the skillful preparation of TEM samples with FIB. The financial support of CBMM (Companhia Brasileira de Metalurgia e Mineracao) is gratefully acknowledged. L. Delannay is mandated by the FNRS-Belgium. Computational resources have been provided by the supercomputing facilities of the UCLouvain (CISM/UCL) and the Consortium des Equipements de Calcul Intensif en Federation Wallonie Bruxelles (CÉCI) funded by the Fond de la Recherche Scientifique de Belgique (F.R.S.-FNRS) under convention 2.5020.11.; Cbmm; F.r.s.-fnrs, 2.5020.11 ; | Approved | Most recent IF: 4.364 | ||
| Call Number | EMAT @ emat @UA @ admin @ c:irua:156721 | Serial | 5161 | ||
| Permanent link to this record | |||||
| Author | Idrissi, H.; Schryvers, D. | ||||
| Title |
Investigation of the elementary mechanisms controlling dislocation/twin boundary interactions in fcc metals and alloys : from conventional to advanced TEM characterization | Type | H2 Book chapter | ||
| Year | 2012 | Publication | Abbreviated Journal | ||
| Volume | Issue | Pages | 1213-1224 | ||
| Keywords | H2 Book chapter; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Formatex Research Center | Place of Publication | S.l. | Editor | |
| Language | Wos | Publication Date | 0000-00-00 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | ISBN | 978-84-939843-6-6 | Additional Links | UA library record | |
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | Most recent IF: NA | |||
| Call Number | UA @ lucian @ c:irua:104694 | Serial | 1737 | ||
| Permanent link to this record | |||||
| Author | van Oeffelen, L.; Van Roy, W.; Idrissi, H.; Charlier, D.; Lagae, L.; Borghs, G. | ||||
| Title |
Ion current rectification, limiting and overlimiting conductances in nanopores | Type | A1 Journal article | ||
| Year | 2015 | Publication | PLoS ONE | Abbreviated Journal | Plos One |
| Volume | 10 | Issue | 10 | Pages | e0124171 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Previous reports on Poisson-Nernst-Planck (PNP) simulations of solid-state nanopores have focused on steady state behaviour under simplified boundary conditions. These are Neumann boundary conditions for the voltage at the pore walls, and in some cases also Donnan equilibrium boundary conditions for concentrations and voltages at both entrances of the nanopore. In this paper, we report time-dependent and steady state PNP simulations under less restrictive boundary conditions, including Neumann boundary conditions applied throughout the membrane relatively far away from the nanopore. We simulated ion currents through cylindrical and conical nanopores with several surface charge configurations, studying the spatial and temporal dependence of the currents contributed by each ion species. This revealed that, due to slow co-diffusion of oppositely charged ions, steady state is generally not reached in simulations or in practice. Furthermore, it is shown that ion concentration polarization is responsible for the observed limiting conductances and ion current rectification in nanopores with asymmetric surface charges or shapes. Hence, after more than a decade of collective research attempting to understand the nature of ion current rectification in solid-state nanopores, a relatively intuitive model is retrieved. Moreover, we measured and simulated current-voltage characteristics of rectifying silicon nitride nanopores presenting overlimiting conductances. The similarity between measurement and simulation shows that overlimiting conductances can result from the increased conductance of the electric double-layer at the membrane surface at the depletion side due to voltage-induced polarization charges. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000354916100012 | Publication Date | 2015-05-15 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1932-6203; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.806 | Times cited | 11 | Open Access | |
| Notes | Approved | Most recent IF: 2.806; 2015 IF: 3.234 | |||
| Call Number | c:irua:126366 | Serial | 1744 | ||
| Permanent link to this record | |||||
| Author | Idrissi, H.; Ryelandt, L.; Veron, M.; Schryvers, D.; Jacques, P.J. | ||||
| Title |
Is there a relationship between the stacking fault character and the activated mode of plasticity of FeMn-based austenitic steels? | Type | A1 Journal article | ||
| Year | 2009 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 60 | Issue | 11 | Pages | 941-944 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | By changing the testing temperature, an austenitic FeMnAlSi alloy presents either å-martensite transformation or mechanical twinning during straining. In order to understand the nucleation and growth mechanisms involved in both phenomena, defects and particularly stacking faults, were characterized by transmission electron microscopy. It is observed that the character of the stacking faults also changes (from extrinsic to intrinsic) together with the temperature and the activated mode of plasticity. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000265359900005 | Publication Date | 2009-02-10 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | 84 | Open Access | |
| Notes | Iap | Approved | Most recent IF: 3.747; 2009 IF: 2.949 | ||
| Call Number | UA @ lucian @ c:irua:77276 | Serial | 1751 | ||
| Permanent link to this record | |||||
| Author | Idrissi, H.; Bollinger, C.; Boioli, F.; Schryvers, D.; Cordier, P. | ||||
| Title |
Low-temperature plasticity of olivine revisited with in situ TEM nanomechanical testing | Type | A1 Journal article | ||
| Year | 2016 | Publication | Science Advances | Abbreviated Journal | |
| Volume | 2 | Issue | 2 | Pages | e1501671-e1501671 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The rheology of the lithospheric mantle is fundamental to understanding how mantle convection couples with plate tectonics. However, olivine rheology at lithospheric conditions is still poorly understood because experiments are difficult in this temperature range where rocks and mineral become very brittle. We combine techniques of quantitative in situ tensile testing in a transmission electron microscope and numerical modeling of dislocation dynamics to constrain the low-temperature rheology of olivine. We find that the intrinsic ductility of olivine at low temperature is significantly lower than previously reported values, which were obtained under strain-hardened conditions. Using this method, we can anchor rheological laws determined at higher temperature and can provide a better constraint on intermediate temperatures relevant for the lithosphere. More generally, we demonstrate the possibility of characterizing the mechanical properties of specimens, which can be available in the form of submillimeter-sized particles only. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000379620200043 | Publication Date | 2016-03-12 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2375-2548 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | 32 | Open Access | ||
| Notes | Approved | Most recent IF: NA | |||
| Call Number | UA @ lucian @ c:irua:134983 | Serial | 4202 | ||
| Permanent link to this record | |||||
| Author | van der Rest, A.; Idrissi, H.; Henry, F.; Favache, A.; Schryvers, D.; Proost, J.; Raskin, J.-P.; Van Overmeere, Q.; Pardoen, T. | ||||
| Title |
Mechanical behavior of ultrathin sputter deposited porous amorphous Al2O3 films | Type | A1 Journal article | ||
| Year | 2017 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 125 | Issue | 125 | Pages | 27-37 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The determination of the mechanical properties of porous amorphous Al2O3 thin films is essential to address reliability issues in wear-resistant, optical and electronic coating applications. Testing the mechanical properties of Al2O3 films thinner than 200 nm is challenging, and the link between the mechanical behavior and the microstructure of such films is largely unknown. Herein, we report on the elastic and viscoplastic mechanical properties of amorphous Al2O3 thin films synthesized by reactive magnetron sputtering using a combination of internal stress, nanoindentation, and on-chip uniaxial tensile testing, together with mechanical homogenization models to separate the effect of porosity from intrinsic variations of the response of the sound material. The porosity is made of voids with 2e30 nm diameter. The Young's modulus and hardness of the films decrease by a factor of two when the deposition pressure increases from 1.2 to 8 mTorr. The contribution of porosity was found to be small, and a change in the atomic structure of the amorphous Al2O3 matrix is hypothesized to be the main contributing factor. The activation volume associated to the viscoplastic deformation mechanism is around 100 Å3. Differences in the atomic structure of the films could not be revealed by electron diffraction, pointing to a minute effect of atomic arrangement on the elastic properties. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000394201500003 | Publication Date | 2016-12-02 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 5 | Open Access | OpenAccess |
| Notes | This work has been funded by the Belgian Science Policy through the IAP 7/21 project. The support of the ‘Fonds Belge pour la Recherche dans l’Industrie et l’Agriculture (FRIA)’ for A.v.d.R. is also gratefully acknowledged, as well as the support of FNRS through the grant PDR T.0122.13 “Mecano”. | Approved | Most recent IF: 5.301 | ||
| Call Number | EMAT @ emat @ c:irua:138990 | Serial | 4330 | ||
| Permanent link to this record | |||||
| Author | Salje, E.K.H.; Zhang, H.; Idrissi, H.; Schryvers, D.; Carpenter, M.A.; Moya, X.; Planes, A. | ||||
| Title |
Mechanical resonance of the austenite/martensite interface and the pinning of the martensitic microstructures by dislocations in Cu74.08Al23.13Be2.79 | Type | A1 Journal article | ||
| Year | 2009 | Publication | Physical review: B: condensed matter and materials physics | Abbreviated Journal | Phys Rev B |
| Volume | 80 | Issue | 13 | Pages | 134114,1-1134114,8 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | A single crystal of Cu74.08Al23.13Be2.79 undergoes a martensitic phase transition at 246 and 232 K under heating and cooling, respectively. The phase fronts between the austenite and martensite regions of the sample are weakly mobile with a power-law resonance under external stress fields. Surprisingly, the martensite phase is elastically much harder than the austenite phase showing that interfaces between various crystallographic variants are strongly pinned and cannot be moved by external stress while the phase boundary between the austenite and martensite regions in the sample remains mobile. This unusual behavior was studied by dynamical mechanical analysis (DMA) and resonant ultrasound spectroscopy. The remnant strain, storage modulus, and internal friction were recorded simultaneously for different applied forces in DMA. With increasing forces, the remnant strain increases monotonously while the internal friction peak height shows a minimum at 300 mN. Transmission electron microscopy shows that the pinning is generated by dislocations which are inherited from the austenite phase. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Lancaster, Pa | Editor | ||
| Language | Wos | 000271351300033 | Publication Date | 2009-10-22 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1098-0121;1550-235X; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.836 | Times cited | 38 | Open Access | |
| Notes | Multimat | Approved | Most recent IF: 3.836; 2009 IF: 3.475 | ||
| Call Number | UA @ lucian @ c:irua:78542 | Serial | 1975 | ||
| Permanent link to this record | |||||
| Author | Heidari, H.; Rivero, G.; Idrissi, H.; Ramachandran, D.; Cakir, S.; Egoavil, R.; Kurttepeli, M.; Crabbé, A.C.; Hauffman, T.; Terryn, H.; Du Prez, F.; Schryvers, D. | ||||
| Title |
Melamine–Formaldehyde Microcapsules: Micro- and Nanostructural Characterization with Electron Microscopy | Type | A1 Journal article | ||
| Year | 2016 | Publication | Microscopy and microanalysis | Abbreviated Journal | Microsc Microanal |
| Volume | 22 | Issue | 22 | Pages | 1222-1232 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | A systematic study has been carried out to compare the surface morphology, shell thickness, mechanical properties, and binding behavior of melamine–formaldehyde microcapsules of 5–30 μm diameter size with various amounts of core content by using scanning and transmission electron microscopy including electron tomography, in situ nanomechanical tensile testing, and electron energy-loss spectroscopy. It is found that porosities are present on the outside surface of the capsule shell, but not on the inner surface of the shell. Nanomechanical tensile tests on the capsule shells reveal that Young’s modulus of the shell material is higher than that of bulk melamine–formaldehyde and that the shells exhibit a larger fracture strain compared with the bulk. Core-loss elemental analysis of microcapsules embedded in epoxy indicates that during the curing process, the microcapsule-matrix interface remains uniform and the epoxy matrix penetrates into the surface micro-porosities of the capsule shells. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000393853100011 | Publication Date | 2016-12-21 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1431-9276 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 1.891 | Times cited | 2 | Open Access | |
| Notes | This work was supported by SIM vzw, Technologiepark 935, BE-9052 Zwijnaarde, Belgium, within the InterPoCo project of the H-INT-S horizontal program. The authors are also thankful to Stijn Van den Broeck and Dr. Frederic Leroux for help in sample preparation and to S. Bals and J. Verbeeck for valuable discussions. H.I. acknowledges the IAP program of the Belgian State Federal Office for Scientific, Technical and Cultural Affairs, under Contract No. P7/21. | Approved | Most recent IF: 1.891 | ||
| Call Number | EMAT @ emat @ c:irua:138980 | Serial | 4333 | ||
| Permanent link to this record | |||||
| Author | Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J. | ||||
| Title |
Multiscale characterization of the work hardening mechanisms in Fe-Mn based TWIP steels | Type | A1 Journal article | ||
| Year | 2012 | Publication | Steel research international | Abbreviated Journal | Steel Res Int |
| Volume | 83 | Issue | 4 | Pages | 385-390 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | When strained in tension, high-manganese austenitic twinning induced plasticity (TWIP) steels achieve very high strength and elongation before necking. The main hypotheses available in the literature about the origin of their excellent work hardening include deformation twinning and dynamic strain ageing. In order to provide some answers, various experiments at different scales were conducted on FeMnC steels and the Fe28 wt%Mn3.5 wt%Al2.8 wt%Si alloy. At a macroscopic scale, tensile tests were performed on all the studied grades. It was shown that, though the FeMnAlSi based alloy retains very high elongation, the FeMnC steels properties are even more extraordinary. Tensile tests at different strain rates with the help of digital image correlation were also performed on the Fe20 wt%Mn1.2 wt%C steel to study the PLC effect occurring in this type of steel. It is suggested that supplementary hardening could come from reorientation of MnC pairs in the cores of the dislocations. At a microscopic scale, the Fe20 wt%Mn1.2 wt%C TWIP steel and the FeMnAlSi grade were thoroughly investigated by means of in situ TEM analysis. In the FeMnC steel, the formed twins could also lead to a composite effect, since they contain plenty of sessile dislocations. In the FeMnAlSi alloy, mechanical twins are thicker and contain fewer defects, leading to a lower work hardening than the other grade. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Verlag Stahleisen | Place of Publication | Düsseldorf | Editor | |
| Language | Wos | 000302471600016 | Publication Date | 2012-02-22 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1611-3683; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 1.235 | Times cited | 12 | Open Access | |
| Notes | Approved | Most recent IF: 1.235; 2012 IF: 0.493 | |||
| Call Number | UA @ lucian @ c:irua:97391 | Serial | 2239 | ||
| Permanent link to this record | |||||
| Author | Ghidelli, M.; Orekhov, A.; Bassi, A.L.; Terraneo, G.; Djemia, P.; Abadias, G.; Nord, M.; Béché, A.; Gauquelin, N.; Verbeeck, J.; Raskin, J.-p.; Schryvers, D.; Pardoen, T.; Idrissi, H. | ||||
| Title |
Novel class of nanostructured metallic glass films with superior and tunable mechanical properties | Type | A1 Journal article | ||
| Year | 2021 | Publication | Acta Materialia | Abbreviated Journal | Acta Mater |
| Volume | Issue | Pages | 116955 | ||
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | A novel class of nanostructured Zr50Cu50 (%at.) metallic glass films with superior and tunable mechanical properties is produced by pulsed laser deposition. The process can be controlled to synthetize a wide range of film microstructures including dense fully amorphous, amorphous embedded with nanocrystals and amorphous nano-granular. A unique dense self-assembled nano-laminated atomic arrangement characterized by alternating Cu-rich and Zr/O-rich nanolayers with different local chemical enrichment and amorphous or amorphous-crystalline composite nanostructure has been discovered, while significant in-plane clustering is reported for films synthetized at high deposition pressures. This unique nanoarchitecture is at the basis of superior mechanical properties including large hardness and elastic modulus up to 10 and 140 GPa, respectively and outstanding total elongation to failure (>9%), leading to excellent strength/ductility balance, which can be tuned by playing with the film architecture. These results pave the way to the synthesis of novel class of engineered nanostructured metallic glass films with high structural performances attractive for a number of applications in microelectronics and coating industry. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000670077800004 | Publication Date | 2021-05-12 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 27 | Open Access | OpenAccess |
| Notes | H.I. is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). This work was supported by the Fonds de la Recherche Scientifique – FNRS under Grant T.0178.19 and Grant CDR– J011320F. We acknowledge funding for the direct electron detector used in the 4D stem studies from the Hercules fund 'Direct electron detector for soft matter TEM' from the Flemish Government J.V acknowledges funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 823717 – ESTEEM3. A.O. has received partial funding from the GOA project “Solarpaint” of the University of Antwerp. A.B. and J.V. acknowledge funding through FWO project G093417N ('Compressed sensing enabling low dose imaging in transmission electron microscopy') from the Flanders Research Fund. M.G. and A.L.B acknowledge Chantelle Ekanem for support in PLD depositions. | Approved | Most recent IF: 5.301 | ||
| Call Number | EMAT @ emat @c:irua:178142 | Serial | 6761 | ||
| Permanent link to this record | |||||
| Author | Idrissi, H.; Carrez, P.; Cordier, P. | ||||
| Title |
On amorphization as a deformation mechanism under high stresses | Type | A1 Journal article | ||
| Year | 2022 | Publication | Current opinion in solid state and materials science | Abbreviated Journal | Curr Opin Solid St M |
| Volume | 26 | Issue | 1 | Pages | 100976-17 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | In this paper we review the work related to amorphization under mechanical stress. Beyond pressure, we highlight the role of deviatoric or shear stresses. We show that the most recent works make amorphization appear as a deformation mechanism in its own right, in particular under extreme conditions (shocks, deformations under high stresses, high strain-rates). | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000779433300002 | Publication Date | 2022-01-13 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-0286 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 11 | Times cited | Open Access | OpenAccess | |
| Notes | Approved | Most recent IF: 11 | |||
| Call Number | UA @ admin @ c:irua:188014 | Serial | 7064 | ||
| Permanent link to this record | |||||
| Author | Idrissi, H.; Béché, A.; Gauquelin, N.; Ul-Haq, I.; Bollinger, C.; Demouchy, S.; Verbeeck, J.; Pardoen, T.; Schryvers, D.; Cordier, P. | ||||
| Title |
On the formation mechanisms of intragranular shear bands in olivine by stress-induced amorphization | Type | A1 Journal article | ||
| Year | 2022 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 239 | Issue | Pages | 118247-118249 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Intragranular amorphization shear lamellae are found in deformed olivine aggregates. The detailed trans-mission electron microscopy analysis of intragranular lamella arrested in the core of a grain provides novel information on the amorphization mechanism. The deformation field is complex and heteroge-neous, corresponding to a shear crack type instability involving mode I, II and III loading components. The formation and propagation of the amorphous lamella is accompanied by the formation of crystal defects ahead of the tip. These defects are geometrically necessary [001] dislocations, characteristics of high-stress deformation in olivine, and rotational nanodomains which are tentatively interpreted as disclinations. We show that these defects play an important role in dictating the path followed by the amorphous lamella. Stress-induced amorphization in olivine would thus result from a direct crystal-to -amorphous transformation associated with a shear instability and not from a mechanical destabilization due to the accumulation of high number of defects from an intense preliminary deformation. The pref-erential alignment of some lamellae along (010) is a proof of the lower ultimate mechanical strength of these planes.(c) 2022 The Authors. Published by Elsevier Ltd on behalf of Acta Materialia Inc. This is an open access article under the CC BY license ( http://creativecommons.org/licenses/by/4.0/ ) | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000861076600004 | Publication Date | 2022-08-05 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 9.4 | Times cited | 5 | Open Access | OpenAccess |
| Notes | The QuanTEM microscope was partially funded by the Flemish government. The K2 camera was funded by FWO Hercules fund G0H4316N 'Direct electron detector for soft matter TEM'. A. Beche acknowledges funding from FWO project G093417N ('Compressed sensing enabling low dose imaging in transmission electron microscopy'). H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). This work was supported by the FNRS under Grant PDR – T011322F and by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme under grant agreement No 787,198 Time Man. J-L Rouviere is acknowledged for his support with the GPA softawre. | Approved | Most recent IF: 9.4 | ||
| Call Number | UA @ admin @ c:irua:191432 | Serial | 7186 | ||
| Permanent link to this record | |||||
| Author | Ding, L.; Sapanathan, T.; Schryvers, D.; Simar, A.; Idrissi, H. | ||||
| Title |
On the formation of antiphase boundaries in Fe₄Al₁₃ intermetallics during a high temperature treatment | Type | A1 Journal article | ||
| Year | 2022 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 215 | Issue | Pages | 114726-6 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | In this paper, we report atomic scale observations and formation mechanisms of a high-density of antiphase boundaries (APBs) within an ultra-fine-grained Fe4Al13 intermetallic layer at an Al/steel interface after a heat treatment at 596 degrees C. The results reveal that the APBs are formed by nucleation and the glide of partial dislocations with Burgers vector of b/3[010] (b = 12.47 angstrom). The intensive activation of APBs locally transforms the Fe4Al13 structure from the quasicrystal approximant structure to a quasicrystal. Very few stacking faults and nanotwins are observed indicating that the formation of planar defects is mainly driven by this transformation. This new insight on the formation of high density of APBs could possibly lead to an improvement in toughness by increasing the strength/ductility balance of this intermetallic. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000800016600003 | Publication Date | 2022-04-08 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 6 | Times cited | Open Access | OpenAccess | |
| Notes | Approved | Most recent IF: 6 | |||
| Call Number | UA @ admin @ c:irua:188644 | Serial | 7088 | ||
| Permanent link to this record | |||||
| Author | Idrissi, H.; Renard, K.; Ryelandt, L.; Schryvers, D.; Jacques, P.J. | ||||
| Title |
On the mechanism of twin formation in FeMnC TWIP steels | Type | A1 Journal article | ||
| Year | 2010 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 58 | Issue | 7 | Pages | 2464-2476 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Although it is well known that FeMnC TWIP steels exhibit high work-hardening rates, the elementary twinning mechanisms controlling the plastic deformation of these steels have still not been characterized. The aim of the present study is to analyse the extended defects related to the twinning occurrence using transmission electron microscopy. Based on these observations, the very early stage of twin nucleation can be attributed to the pole mechanism with deviation proposed by Cohen and Weertman or to the model of Miura, Takamura and Narita, while the twin growth is controlled by the pole mechanism proposed by Venables. High densities of sessile Frank dislocations are observed within the twins at the early stage of deformation, which can affect the growth and the stability of the twins, but also the strength of these twins and their interactions with the gliding dislocations present in the matrix. This experimental evidence is discussed and compared to recent results in order to relate the defects analysis to the macroscopic behaviour of this category of material. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000276523200018 | Publication Date | 2010-01-25 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 244 | Open Access | |
| Notes | Iap | Approved | Most recent IF: 5.301; 2010 IF: 3.791 | ||
| Call Number | UA @ lucian @ c:irua:82270 | Serial | 2441 | ||
| Permanent link to this record | |||||
| Author | Marteleur, M.; Idrissi, H.; Amin-Ahmadi, B.; Prima, F.; Schryvers, D.; Jacques, P.J. | ||||
| Title |
On the nucleation mechanism of {112} < 111 > mechanical twins in as-quenched beta metastable Ti-12 wt.% Mo alloy | Type | A1 Journal article | ||
| Year | 2019 | Publication | Materialia | Abbreviated Journal | |
| Volume | 7 | Issue | Pages | Unsp 100418 | |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Recently developed beta-metastable Ti grades take advantage of the simultaneous activation of TRIP and TWIP effects for enhancing their work hardening rate. However, the role of each plasticity mechanism on the macroscopic mechanical response is still unclear. In this work, the nucleation mechanism of the first activated plasticity mechanism, namely {112} < 111 > twinning, was investigated. Firstly, post-mortem TEM analysis showed that twins nucleate on pre-existing microstructural defects such as thermal jogs with the zonal dislocation mechanism. The precipitation of the omega phase on twin boundaries has been observed, as well as the emission of numerous dislocations from super-jogs present in these twin boundaries. It is also shown that {112} < 111 > twins act as effective dislocation sources for the subsequent plasticity mechanisms such as beta -> alpha '' martensitic transformation and {332} < 111 > twinning. Secondly, in situ TEM tensile testing of the investigated Ti grade highlighted the primary role of the initial defect configuration present in the microstructure. It is shown that twins cannot nucleate without the presence of specific defects allowing the triggering of the dislocation decomposition needed for the twinning mechanism highlighted in investigated bulk samples. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000537131000052 | Publication Date | 2019-07-31 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2589-1529 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | no | |||
| Call Number | UA @ admin @ c:irua:170326 | Serial | 6875 | ||
| Permanent link to this record | |||||
| Author | Proost, J.; Blaffart, F.; Turner, S.; Idrissi, H. | ||||
| Title |
On the Origin of Damped Electrochemical Oscillations at Silicon Anodes (Revisited) | Type | A1 Journal article | ||
| Year | 2014 | Publication | ChemPhysChem : a European journal of chemical physics and physical chemistry | Abbreviated Journal | Chemphyschem |
| Volume | 15 | Issue | 14 | Pages | 3116-3124 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Electrochemical oscillations accompanying the formation of anodic silica have been shown in the past to be correlated with rather abrupt changes in the mechanical stress state of the silica film, commonly associated with some kind of fracture or porosification of the oxide. To advance the understanding on the origin of such oscillations in fluoride-free electrolytes, we have revisited a seminal experiment reported by Lehmann almost two decades ago. We thereby demonstrate that the oscillations are not stress-induced, and do not originate from a morphological transformation of the oxide in the course of anodisation. Alternatively, the mechanical features accompanying the oscillations can be explained by a partial relaxation of the field-induced electrostrictive stress. Furthermore, our observations suggest that the oscillation mechanism more likely results from a periodic depolarisation of the anodic silica. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000342770500029 | Publication Date | 2014-08-27 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1439-4235; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.075 | Times cited | 5 | Open Access | |
| Notes | Approved | Most recent IF: 3.075; 2014 IF: 3.419 | |||
| Call Number | UA @ lucian @ c:irua:121086 | Serial | 2444 | ||
| Permanent link to this record | |||||
| Author | Idrissi, H.; Renard, K.; Schryvers, D.; Jacques, P.J. | ||||
| Title |
On the relationship between the twin internal structure and the work-hardening rate of TWIP steels | Type | A1 Journal article | ||
| Year | 2010 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 63 | Issue | 10 | Pages | 961-964 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | FeMnC and FeMnSiAl TWIP steels deformed under the same conditions exhibit different work-hardening rates. The present study investigates the microstructure of plastically deformed FeMnC and FeMnSiAl samples, particularly the internal structure of the mechanically generated twins and their topology at the grain scale. Twins in the FeMnC steel are finer and full of sessile dislocations, rendering this material distinctly stronger with an improved work-hardening rate. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000282461800003 | Publication Date | 2010-07-20 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | 145 | Open Access | |
| Notes | Iap | Approved | Most recent IF: 3.747; 2010 IF: 2.820 | ||
| Call Number | UA @ lucian @ c:irua:84472 | Serial | 2452 | ||
| Permanent link to this record | |||||
| Author | Kashiwar, A.; Arseenko, M.; Simar, A.; Idrissi, H. | ||||
| Title |
On the role of microstructural defects on precipitation, damage, and healing behavior in a novel Al-0.5Mg2Si alloy | Type | A1 Journal article | ||
| Year | 2024 | Publication | Materials & design | Abbreviated Journal | |
| Volume | 239 | Issue | Pages | 112765-112769 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | A recently developed healable Al-Mg2Si designed by the programmed damage and repair (PDR) strategy is studied considering the role microstructural defects play on precipitation, damage, and healing. The alloy incorporates sacrificial Mg2Si particles that precipitate after friction stir processing (FSP). They act as damage localization sites and are healable based on the solid-state diffusion of Al-matrix. A combination of different transmission electron microscopy (TEM) imaging techniques enabled the visualization and quantification of various crystallographic defects and the spatial distribution of Mg2Si precipitates. Intragrain nucleation is found to be the dominant mechanism for precipitation during FSP whereas grain boundaries and subgrain boundaries mainly lead to coarsening of the precipitates. The statistical and spatial analyses of the damaged particles have shown particle fracture as the dominant damage mechanism which is strongly dependent on the size and aspect ratio of the particles whereas the damage was not found to depend on the location of the precipitates within the matrix. The damaged particles are associated with dislocations accumulated around them. The interplay of these dislocations is directly visualized during healing based on in situ TEM heating which revealed recovery in the matrix as an operative mechanism during the diffusion healing of the PDR alloy. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001194110200001 | Publication Date | 2024-02-17 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0264-1275; 1873-4197 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 8.4 | Times cited | Open Access | Not_Open_Access | |
| Notes | Approved | Most recent IF: 8.4; 2024 IF: 4.364 | |||
| Call Number | UA @ admin @ c:irua:203298 | Serial | 9068 | ||
| Permanent link to this record | |||||
| Author | Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J. | ||||
| Title |
On the stress state dependence of the twinning rate and work hardening in twinning-induced plasticity steels | Type | A1 Journal article | ||
| Year | 2012 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 66 | Issue | 12 | Pages | 966-971 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The influence of the stress state on the twinning rate and work hardening is studied in the case of an FeMnC TWIP steel strained in uniaxial tension, simple shear and rolling. The resulting stressstrain responses exhibit marked differences. The twinning rate, number of activated twinning systems in each grain, twin thickness and transmission of twins across grain boundaries are dependent on the imposed stress state during straining. Relationships between twin features and macroscopic work hardening rate are established. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000304641500004 | Publication Date | 2012-02-10 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | 41 | Open Access | |
| Notes | Iap | Approved | Most recent IF: 3.747; 2012 IF: 2.821 | ||
| Call Number | UA @ lucian @ c:irua:98374 | Serial | 2454 | ||
| Permanent link to this record | |||||
| Author | Coulombier, M.; Baral, P.; Orekhov, A.; Dohmen, R.; Raskin, J.P.; Pardoen, T.; Cordier, P.; Idrissi, H. | ||||
| Title |
On-chip very low strain rate rheology of amorphous olivine films | Type | A1 Journal article | ||
| Year | 2024 | Publication | Acta materialia | Abbreviated Journal | |
| Volume | 266 | Issue | Pages | 119693-12 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Recent observations made by the authors revealed the activation of stress induced amorphization and sliding at grain boundary in olivine [1], a mechanism which is expected to play a pivotal role in the viscosity drop at the lithosphere-asthenosphere boundary and the brittle -ductile transition in the lithospheric mantle. However, there is a lack of information in the literature regarding the intrinsic mechanical properties and the elementary deformation mechanisms of this material, especially at time scales relevant for geodynamics. In the present work, amorphous olivine films were obtained by pulsed laser deposition (PLD). The mechanical response including the rate dependent behavior are investigated using a tension -on -chip (TOC) method developed at UCLouvain allowing to perform creep/relaxation tests on thin films at extremely low strain rates. In the present work, strain rate down to 10-12 s- 1 was reached which is unique. High strain rate sensitivity of 0.054 is observed together with the activation of relaxation at the very early stage of deformation. Furthermore, digital image correlation (DIC), used for the first time on films deformed by TOC, reveals local strain heterogeneities. The relationship between such heterogeneities, the high strain rate sensitivity and the effect of the electron beam in the scanning electron microscope is discussed and compared to the literature. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001170513400001 | Publication Date | 2024-01-17 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 9.4 | Times cited | Open Access | ||
| Notes | Approved | Most recent IF: 9.4; 2024 IF: 5.301 | |||
| Call Number | UA @ admin @ c:irua:204864 | Serial | 9163 | ||
| Permanent link to this record | |||||
| Author | Idrissi, H.; Schryvers, D.; Salje, E.K.H.; Zhang, H.; Carpenter, M.A.; Moya, X. | ||||
| Title |
Pinning of the martensitic microstructures by dislocations in Cu74.08Al23.13Be2.79 | Type | P1 Proceeding | ||
| Year | 2009 | Publication | Abbreviated Journal | ||
| Volume | Issue | Pages | 02029,1-02029,5 | ||
| Keywords | P1 Proceeding; Electron microscopy for materials research (EMAT) | ||||
| Abstract | A single crystal of Cu74.08Al23.13Be2.79 undergoes a martensitic phase transition at 246K and 232K under heating and cooling, respectively. Surprisingly, the martensite phase is elastically much harder than the austenite phase showing that interfaces between various crystallographic variants are strongly pinned and can not be moved by external stress while the phase boundary between the austenite and martensite regions in the sample remains mobile. This unusual behavior was revealed by Dynamical Mechanical Analysis and Resonant Ultrasound Spectroscopy. Transmission Electron Microscopy shows that the pinning is generated by dislocations, which are inherited from the austenite phase. Such dislocations can hinder the movement of stacking faults in the 18R martensite structure or twin boundaries between martensite variants. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Edp | Place of Publication | Coutaboeuf | Editor | |
| Language | Wos | 000274582300033 | Publication Date | 2009-08-31 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | ||
| Impact Factor | Times cited | 2 | Open Access | ||
| Notes | Approved | Most recent IF: NA | |||
| Call Number | UA @ lucian @ c:irua:81952 | Serial | 2626 | ||
| Permanent link to this record | |||||
| Author | Idrissi, H.; Kobler, A.; Amin-Ahmadi, B.; Coulombier, M.; Galceran, M.; Raskin, J.-P.; Godet, S.; Kuebel, C.; Pardoen, T.; Schryvers, D. | ||||
| Title |
Plasticity mechanisms in ultrafine grained freestanding aluminum thin films revealed by in-situ transmission electron microscopy nanomechanical testing | Type | A1 Journal article | ||
| Year | 2014 | Publication | Applied physics letters | Abbreviated Journal | Appl Phys Lett |
| Volume | 104 | Issue | 10 | Pages | 101903 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | In-situ bright field transmission electron microscopy (TEM) nanomechanical tensile testing and in-situ automated crystallographic orientation mapping in TEM were combined to unravel the elementary mechanisms controlling the plasticity of ultrafine grained Aluminum freestanding thin films. The characterizations demonstrate that deformation proceeds with a transition from grain rotation to intragranular dislocation glide and starvation plasticity mechanism at about 1% deformation. The grain rotation is not affected by the character of the grain boundaries. No grain growth or twinning is detected. (C) 2014 AIP Publishing LLC. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | American Institute of Physics | Place of Publication | New York, N.Y. | Editor | |
| Language | Wos | 000333082800022 | Publication Date | 2014-03-12 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0003-6951;1077-3118; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.411 | Times cited | 24 | Open Access | |
| Notes | Approved | Most recent IF: 3.411; 2014 IF: 3.302 | |||
| Call Number | UA @ lucian @ c:irua:116866 | Serial | 2649 | ||
| Permanent link to this record | |||||
| Author | Idrissi, H.; Turner, S.; Mitsuhara, M.; Wang, B.; Hata, S.; Coulombier, M.; Raskin, J.-P.; Pardoen, T.; Van Tendeloo, G.; Schryvers, D. | ||||
| Title |
Point defect clusters and dislocations in FIB irradiated nanocrystalline aluminum films : an electron tomography and aberration-corrected high-resolution ADF-STEM study | Type | A1 Journal article | ||
| Year | 2011 | Publication | Microscopy and microanalysis | Abbreviated Journal | Microsc Microanal |
| Volume | 17 | Issue | 6 | Pages | 983-990 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Focused ion beam (FIB) induced damage in nanocrystalline Al thin films has been characterized using advanced transmission electron microscopy techniques. Electron tomography was used to analyze the three-dimensional distribution of point defect clusters induced by FIB milling, as well as their interaction with preexisting dislocations generated by internal stresses in the Al films. The atomic structure of interstitial Frank loops induced by irradiation, as well as the core structure of Frank dislocations, has been resolved with aberration-corrected high-resolution annular dark-field scanning TEM. The combination of both techniques constitutes a powerful tool for the study of the intrinsic structural properties of point defect clusters as well as the interaction of these defects with preexisting or deformation dislocations in irradiated bulk or nanostructured materials. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Cambridge, Mass. | Editor | ||
| Language | Wos | 000297832300018 | Publication Date | 2011-10-27 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1431-9276;1435-8115; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 1.891 | Times cited | 25 | Open Access | |
| Notes | Iap; Fwo | Approved | Most recent IF: 1.891; 2011 IF: 3.007 | ||
| Call Number | UA @ lucian @ c:irua:93627 | Serial | 2653 | ||
| Permanent link to this record | |||||
| Author | Schryvers, D.; Salje, E.K.H.; Nishida, M.; De Backer, A.; Idrissi, H.; Van Aert, S. | ||||
| Title |
Quantification by aberration corrected (S)TEM of boundaries formed by symmetry breaking phase transformations | Type | A1 Journal article | ||
| Year | 2017 | Publication | Ultramicroscopy | Abbreviated Journal | Ultramicroscopy |
| Volume | 176 | Issue | Pages | 194-199 | |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The present contribution gives a review of recent quantification work of atom displacements, atom site occupations and level of crystallinity in various systems and based on aberration corrected HR(S)TEM images. Depending on the case studied, picometer range precisions for individual distances can be obtained, boundary widths at the unit cell level determined or statistical evolutions of fractions of the ordered areas calculated. In all of these cases, these quantitative measures imply new routes for the applications of the respective materials. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000403992200026 | Publication Date | 2017-01-09 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0304-3991 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.843 | Times cited | 1 | Open Access | OpenAccess |
| Notes | The authors acknowledge financial support from the Fund for Scientific Research-Flanders (G.0064.10N, G.0393.11N, G.0374.13N, G.0368.15N, G.0369.15N) and the Flemish Hercules 3 program for large infrastructure as well as financial support from the European Union Seventh Framework Programme (FP7/2007 – 2013) under Grant agreement no. 312483 (ESTEEM2). EKHS thanks EPSRC (EP/ K009702/1) and the Leverhulme trust (EM-2016-004) for support. DS and MN acknowledge financial support from the Japan Society for the Promotion of Science (JSPS, Japan) through the Grant-in-Aid for Scientific Research (A: No. 26249090) and the Strategic Young Researcher Overseas Visits Program for Accelerating Brain Circulation (R2408). | Approved | Most recent IF: 2.843 | ||
| Call Number | EMAT @ emat @c:irua:149654 | Serial | 4914 | ||
| Permanent link to this record | |||||
| Author | Samaeeaghmiyoni, V.; Idrissi, H.; Groten, J.; Schwaiger, R.; Schryvers, D. | ||||
| Title |
Quantitative in-situ TEM nanotensile testing of single crystal Ni facilitated by a new sample preparation approach | Type | A1 Journal article | ||
| Year | 2017 | Publication | Micron | Abbreviated Journal | Micron |
| Volume | 94 | Issue | 94 | Pages | 66-73 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Twin-jet electro-polishing and Focused Ion Beam (FIB) were combined to produce small size Nickel single crystal specimens for quantitative in-situ nanotensile experiments in the transmission electron microscope. The combination of these techniques allows producing samples with nearly defect-free zones in the centre in contrast to conventional FIB-prepared samples. Since TEM investigations can be performed on the electro-polished samples prior to in-situ TEM straining, specimens with desired crystallographic orientation and initial microstructure can be prepared. The present results reveal a dislocation nucleation controlled plasticity, in which small loops induced by FIB near the edges of the samples play a central role. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000393247300008 | Publication Date | 2016-12-21 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0968-4328 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 1.98 | Times cited | 11 | Open Access | OpenAccess |
| Notes | This research has been performed with the financial support of the Belgian Science Policy (Belspo) under the framework of the interuniversity attraction poles program, IAP7/21. Financial support from the Flemish (FWO) and German Research Foundation (DFG) through the European M-ERA.NET project “FaSS” (Fatigue Simulation near Surfaces) under the grant numbers GA.014.13N and SCHW855/5-1, respectively, is gratefully acknowledged. V. Samaeeaghmiyoni also acknowledges the FWO research project G012012N “Understanding nanocrystalline mechanical behaviour from structural investigations”. H. Idrissi is currently mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). | Approved | Most recent IF: 1.98 | ||
| Call Number | EMAT @ emat @ c:irua:139515 | Serial | 4341 | ||
| Permanent link to this record | |||||