Home | << 1 2 3 >> |
Records | |||||
---|---|---|---|---|---|
Author | Zhang, Z.; Rosalie, J.M.; Medhekar, N.V.; Bourgeois, L. | ||||
Title | Resolving the FCC/HCP interfaces of the \gamma'(Ag2Al) precipitate phase in aluminium | Type | A1 Journal article | ||
Year | 2019 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
Volume | 174 | Issue | 174 | Pages | 116-130 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The gamma'(Ag2Al) phase in the Al-Ag alloy system has served as a textbook example for understanding phase transformations, precipitating hexagonal close-packed (HCP) crystals in the face-centred cubic (FCC) aluminium matrix. The gamma' precipitates display fully coherent interfaces at their broad facets and semicoherent interfaces at their edges. Shockley partial dislocations are expected to decorate the semicoherent interface due to the FCC-HCP structural transformation. Determining the exact locations and core structures of interfacial dislocations, however, remains challenging. In this study, we used aberration-corrected scanning transmission electron microscopy and atomistic simulations to re-visit this classical system. We characterised and explained the Ag segregation at coherent interfaces in the early stage of precipitation. For semicoherent interfaces, interfacial dislocations and reconstructions were revealed by bridging advanced microstructure characterisation and atomistic simulations. In particular, we discovered a new FCC/HCP interfacial structure that displays a unique combination of Shockley partial, Lomer-Cottrell and Hirth dislocations that evolve from the known interfacial structure purely composed by Shockley partial dislocations. Our findings show that the FCC-HCP transformation is more complex than hitherto considered, due to the interplay between structure and composition confined at interfaces. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000474501300011 | Publication Date | 2019-05-18 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.301 | Times cited | 3 | Open Access | |
Notes | ; The authors acknowledge funding from the Australian Research Council (LE0454166, LE110100223), the Victorian State Government and Monash University for instrumentation, and use of the facilities within the Monash Centre for Electron Microscopy. LB and NM acknowledge the financial support of the Australian Research Council (DP150100558). The authors also gratefully acknowledge the computational support from Monash Advanced Research Computing Hybrid, the National Computational Infrastructure and Pawsey Supercomputing Centre. ZZ is thankful to Monash University for a Monash Graduate Scholarship, a Monash International Postgraduate Research Scholarship and a Monash Centre for Electron Microscopy Postgraduate Scholarship. ZZ is indebted to Matthew Weyland for his training in aberration-corrected electron microscopy, Scott Findlay for his help on image simulations, Xiang Gao for alloy casting and Ian Polmear for discussions. ; | Approved | Most recent IF: 5.301 | ||
Call Number | UA @ admin @ c:irua:161192 | Serial | 5395 | ||
Permanent link to this record | |||||
Author | Weng, Y.; Ding, L.; Zhang, Z.; Jia, Z.; Wen, B.; Liu, Y.; Muraishi, S.; Li, Y.; Liu, Q. | ||||
Title | Effect of Ag addition on the precipitation evolution and interfacial segregation for Al-Mg-Si alloy | Type | A1 Journal article | ||
Year | 2019 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
Volume | 180 | Issue | 180 | Pages | 301-316 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The effect of Ag addition on the precipitation evolution and interfacial segregation for Al-Mg-Si alloys was systematically investigated by atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), atom probe tomography (APT) and density functional theory (DFT) calculation. At the early aging stage, Ag atoms could enter clusters and refine the distribution of these clusters. Then, Ag atoms preferentially segregate at the GP zone/alpha-Al and beta ''/alpha-Al interfaces at the peak aging stage by the replacement of Al atoms in FCC matrix. With prolonging aging time, Ag atoms generally incorporate into the interior of beta '' precipitate, facilitating the formation of QP lattice (a hexagonal network of Si atomic columns) and the local symmetry substructures, Ag sub-unit (1) and Ag sub-unit (2). At the over-aged stage, the Ag sub-unit (1) and Ag sub-unit (2) could transform to the beta'(Ag) (i.e. beta'(Ag1) and beta'(Ag2).) and Q'(Ag) unit cells, respectively. All the precipitates at the over-aging stage have a composite and disordered structure due to the coexistence of different unit cells (beta'(Ag1), beta'(Ag2), Q'(Ag) and beta') and the non-periodic arrangement of Ag atoms within the precipitate. In the equilibrium stage, the incorporated Ag atoms in the precipitates release into the alpha-Al matrix as solute atoms or form Ag particles. In general, Ag atoms undergo a process of “segregate at the precipitate/matrix interface -> incorporate into the interior of precipitate -> release into the alpha-Al matrix” during the precipitation for Al-Mg-Si-Ag alloys. Besides, Ag segregation is found at the interfaces of almost all metastable phases (including GP zone, beta '', beta'/beta'(Ag) phase) in Al-Mg-Si-Ag alloys. The Ag segregation at the beta'/alpha-Al interface could increase the length/diameter ratio of beta' phase and thus promote the additional strengthening potential of these alloys. These findings provide a new route for precipitation hardening by promoting the nucleation and morphology evolution of precipitates. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000495519100028 | Publication Date | 2019-09-12 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.301 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 5.301 | |||
Call Number | UA @ admin @ c:irua:164641 | Serial | 6295 | ||
Permanent link to this record | |||||
Author | Cautaerts, N.; Delville, R.; Stergar, E.; Pakarinen, J.; Verwerft, M.; Yang, Y.; Hofer, C.; Schnitzer, R.; Lamm, S.; Felfer, P.; Schryvers, D. | ||||
Title | The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study | Type | A1 Journal article | ||
Year | 2020 | Publication | Acta Materialia | Abbreviated Journal | Acta Mater |
Volume | 197 | Issue | Pages | 184-197 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | This work encompasses an in-depth transmission electron microscopy and atom probe tomography study of Ti-stabilized austenitic steel irradiated with Fe-ions. The focus is on radiation induced segregation and precipitation, and in particular on how Ti and TiC affect these processes. A 15-15Ti steel (grade: DIN 1.4970) in two thermo-mechanical states (cold-worked and aged) was irradiated at different temperatures up to a dose of 40 dpa. At low irradiation temperatures, the cold-worked and aged materials evolved to a similar microstructure dominated by small Si and Ni clusters, corresponding to segregation to small point defect clusters. TiC precipitates, initially present in the aged material, were found to be unstable under these irradiation conditions. Elevated irradiation temperatures resulted in the nucleation of nanometer sized Cr enriched TiC precipitates surrounded by Si and Ni enriched shells. In addition, nanometer sized Ti- and Mn-enriched G-phase (M6Ni16Si7) precipitates formed, often attached to TiC precipitates. Post irradiation, larger number densities of TiC were observed in the cold-worked material compared to the aged material. This was correlated with a lower volume fraction of G-phase. The findings suggest that at elevated irradiation temperatures, the precipitate-matrix interface is an important point defect sink and contributes to the improved radiation resistance of this material. The study is a first of its kind on stabilized steel and demonstrates the significance of the small Ti addition to the evolution of the microstructure under irradiation. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000564767000001 | Publication Date | 2020-07-10 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.4 | Times cited | Open Access | Not_Open_Access | |
Notes | ; This work was supported by ENGIE [contract number 2015-AC-007 e BSUEZ6900]; the U.S. Department of Energy, Office of Nuclear Energy under DOE Idaho Operations Office Contract DE-AC07051D14517 as part of a Nuclear Science User Facilities experiment; and by the MYRRHA program at SCK-CEN, Belgium. Funding of the Austrian BMK (846933) in the framework of the program “Production of the future” and the “BMK Professorship for Industry” is gratefully acknowledged. We want to thank the staffat MIBL for assisting with the ion irradiations as well as the staffat CAES for assisting with FIB work and conducting APT measurements. ; | Approved | Most recent IF: 9.4; 2020 IF: 5.301 | ||
Call Number | UA @ admin @ c:irua:171956 | Serial | 6626 | ||
Permanent link to this record | |||||
Author | Ghidelli, M.; Orekhov, A.; Bassi, A.L.; Terraneo, G.; Djemia, P.; Abadias, G.; Nord, M.; Béché, A.; Gauquelin, N.; Verbeeck, J.; Raskin, J.-p.; Schryvers, D.; Pardoen, T.; Idrissi, H. | ||||
Title | Novel class of nanostructured metallic glass films with superior and tunable mechanical properties | Type | A1 Journal article | ||
Year | 2021 | Publication | Acta Materialia | Abbreviated Journal | Acta Mater |
Volume | Issue | Pages | 116955 | ||
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | A novel class of nanostructured Zr50Cu50 (%at.) metallic glass films with superior and tunable mechanical properties is produced by pulsed laser deposition. The process can be controlled to synthetize a wide range of film microstructures including dense fully amorphous, amorphous embedded with nanocrystals and amorphous nano-granular. A unique dense self-assembled nano-laminated atomic arrangement characterized by alternating Cu-rich and Zr/O-rich nanolayers with different local chemical enrichment and amorphous or amorphous-crystalline composite nanostructure has been discovered, while significant in-plane clustering is reported for films synthetized at high deposition pressures. This unique nanoarchitecture is at the basis of superior mechanical properties including large hardness and elastic modulus up to 10 and 140 GPa, respectively and outstanding total elongation to failure (>9%), leading to excellent strength/ductility balance, which can be tuned by playing with the film architecture. These results pave the way to the synthesis of novel class of engineered nanostructured metallic glass films with high structural performances attractive for a number of applications in microelectronics and coating industry. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000670077800004 | Publication Date | 2021-05-12 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.301 | Times cited | 27 | Open Access | OpenAccess |
Notes | H.I. is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). This work was supported by the Fonds de la Recherche Scientifique – FNRS under Grant T.0178.19 and Grant CDR– J011320F. We acknowledge funding for the direct electron detector used in the 4D stem studies from the Hercules fund 'Direct electron detector for soft matter TEM' from the Flemish Government J.V acknowledges funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 823717 – ESTEEM3. A.O. has received partial funding from the GOA project “Solarpaint” of the University of Antwerp. A.B. and J.V. acknowledge funding through FWO project G093417N ('Compressed sensing enabling low dose imaging in transmission electron microscopy') from the Flanders Research Fund. M.G. and A.L.B acknowledge Chantelle Ekanem for support in PLD depositions. | Approved | Most recent IF: 5.301 | ||
Call Number | EMAT @ emat @c:irua:178142 | Serial | 6761 | ||
Permanent link to this record | |||||
Author | Baral, P.; Orekhov, A.; Dohmen, R.; Coulombier, M.; Raskin, J.P.; Cordier, P.; Idrissi, H.; Pardoen, T. | ||||
Title | Rheology of amorphous olivine thin films characterized by nanoindentation | Type | A1 Journal article | ||
Year | 2021 | Publication | Acta Materialia | Abbreviated Journal | Acta Mater |
Volume | 219 | Issue | Pages | 117257 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The rheological properties of amorphous olivine thin films deposited by pulsed laser deposition have been studied based on ambient temperature nanoindentation under constant strain-rate as well as re-laxation conditions. The amorphous olivine films exhibit a viscoelastic-viscoplastic behavior with a significant rate dependency. The strain-rate sensitivity m is equal to similar to 0 . 05 which is very high for silicates, indicating a complex out-of-equilibrium structure. The minimum apparent activation volume determined from nanoindentation experiments corresponds to Mg and Fe atomic metallic sites in the (Mg,Fe)(2)SiO4 crystalline lattice. The ambient temperature creep behavior of the amorphous olivine films differs very much from the one of single crystal olivine. This behavior directly connects to the recent demonstration of the activation of grain boundary sliding in polycrystalline olivine following grain boundary amorphization under high-stress. (C) 2021 The Authors. Published by Elsevier Ltd on behalf of Acta Materialia Inc. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000706867800004 | Publication Date | 2021-08-19 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.301 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 5.301 | |||
Call Number | UA @ admin @ c:irua:182592 | Serial | 6882 | ||
Permanent link to this record | |||||
Author | Yang, M.; Orekhov, A.; Hu, Z.-Y.; Feng, M.; Jin, S.; Sha, G.; Li, K.; Samaee, V.; Song, M.; Du, Y.; Van Tendeloo, G.; Schryvers, D. | ||||
Title | Shearing and rotation of β'' and β' precipitates in an Al-Mg-Si alloy under tensile deformation : in-situ and ex-situ studies | Type | A1 Journal article | ||
Year | 2021 | Publication | Acta Materialia | Abbreviated Journal | Acta Mater |
Volume | 220 | Issue | Pages | 117310 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The interaction between dislocations and nano-precipitates during deformation directly influences hardening response of precipitation-strengthening metals such as Al-Mg-Si alloys. However, how coherent and semi-coherent nano-precipitates accommodate external deformation applied to an Al alloy remains to be elucidated. In-situ tensile experiments in a transmission electron microscope (TEM) were conducted to study the dynamic process of dislocations cutting through coherent needle-like beta '' precipitates with diameters of 3 similar to 8 nm. Comprehensive investigations using in-situ, ex-situ TEM and atom probe tomography uncovered that beta '' precipitates were firstly sheared into small fragments, and then the rotation of the fragments, via sliding along precipitate/matrix interfaces, destroyed their initially coherent interface with the Al matrix. In contrast, semi-coherent beta' precipitates with sizes similar to beta '' were more difficult to be fragmented and accumulation of dislocations at the interface increased interface misfit between beta' and the Al matrix. Consequently, beta' precipitates could basically maintain their needle-like shape after the tensile deformation. This research gains new insights into the interaction between nano-precipitates and dislocations. (C) 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000705535300005 | Publication Date | 2021-09-12 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.301 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 5.301 | |||
Call Number | UA @ admin @ c:irua:182528 | Serial | 6884 | ||
Permanent link to this record | |||||
Author | Choisez, L.; Ding, L.; Marteleur, M.; Kashiwar, A.; Idrissi, H.; Jacques, P.J. | ||||
Title | Shear banding-activated dynamic recrystallization and phase transformation during quasi-static loading of β-metastable Ti – 12 wt % Mo alloy | Type | A1 Journal article | ||
Year | 2022 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
Volume | 235 | Issue | Pages | 118088-13 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Dynamic recrystallization (DRX) within adiabatic shear bands forming during the fracture of TRIP-TWIP β−metastable Ti-12Mo (wt %) alloy was recently reported. The formation of 1-3 µm thick-adiabatic shear bands, and of dynamic recrystallization, was quite surprising as their occurrence generally requires high temperature and/or high strain rate loading while these samples were loaded in quasi-static conditions at room temperature. To better understand the fracture mechanism and associated microstructural evolution, thin foils representative of different stages of the fracture process were machined from the fracture surface by Focused Ion Beam (FIB) and analyzed by Transmission Electron Microscopy (TEM) and Automated Crystal Orientation mapping (ACOM-TEM). Complex microstructure transformations involving severe plastic deformed nano-structuration, crystalline rotation and local precipitation of the omega phase were identified. The spatial and temporal evolution of the microstructure during the propagation of the crack was explained through dynamic recovery and continuous dynamic recrystallization, and linked to the modelled distribution of temperature and strain level where TEM samples were extracted. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000814729300005 | Publication Date | 2022-06-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.4 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 9.4 | |||
Call Number | UA @ admin @ c:irua:188505 | Serial | 7096 | ||
Permanent link to this record | |||||
Author | Mary Joy, R.; Pobedinskas, P.; Baule, N.; Bai, S.; Jannis, D.; Gauquelin, N.; Pinault-Thaury, M.-A.; Jomard, F.; Sankaran, K.J.; Rouzbahani, R.; Lloret, F.; Desta, D.; D’Haen, J.; Verbeeck, J.; Becker, M.F.; Haenen, K. | ||||
Title | The effect of microstructure and film composition on the mechanical properties of linear antenna CVD diamond thin films | Type | A1 Journal article | ||
Year | 2024 | Publication | Acta materialia | Abbreviated Journal | Acta Materialia |
Volume | 264 | Issue | Pages | 119548 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | This study reports the impact of film microstructure and composition on the Young’s modulus and residual stress in nanocrystalline diamond (NCD) thin films ( thick) grown on silicon substrates using a linear antenna microwave plasma-enhanced chemical vapor deposition (CVD) system. Combining laser acoustic wave spectroscopy to determine the elastic properties with simple wafer curvature measurements, a straightforward method to determine the intrinsic stress in NCD films is presented. Two deposition parameters are varied: (1) the substrate temperature from 400 °C to 900 °C, and (2) the [P]/[C] ratio from 0 ppm to 8090 ppm in the H2/CH4/CO2/PH3 diamond CVD plasma. The introduction of PH3 induces a transition in the morphology of the diamond film, shifting from NCD with larger grains to ultra-NCD with a smaller grain size, concurrently resulting in a decrease in Young’s modulus. Results show that the highest Young’s modulus of (113050) GPa for the undoped NCD deposited at 800 °C is comparable to single crystal diamond, indicating that NCD with excellent mechanical properties is achievable with our process for thin diamond films. Based on the film stress results, we propose the origins of tensile intrinsic stress in the diamond films. In NCD, the tensile intrinsic stress is attributed to larger grain size, while in ultra-NCD films the tensile intrinsic stress is due to grain boundaries and impurities. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001126632800001 | Publication Date | 2023-11-23 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.4 | Times cited | Open Access | Not_Open_Access | |
Notes | This work was financially supported by the Special Research Fund (BOF) via Methusalem NANO network, the Research Foundation – Flanders (FWO) via Project G0D4920N, and the CORNET project nr 263-EN “ULTRAHARD: Ultrahard optical diamond coatings” (2020–2021). | Approved | Most recent IF: 9.4; 2024 IF: 5.301 | ||
Call Number | EMAT @ emat @c:irua:202169 | Serial | 8989 | ||
Permanent link to this record | |||||
Author | Arseenko, M.; Hannard, F.; Ding, L.; Zhao, L.; Maire, E.; Villanova, J.; Idrissi, H.; Simar, A. | ||||
Title | A new healing strategy for metals : programmed damage and repair | Type | A1 Journal article | ||
Year | 2022 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
Volume | 238 | Issue | Pages | 118241-10 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Self-healing strategies aim at avoiding part repair or even replacement, which is time consuming, expen-sive and generates waste. However, strategies for metallic systems are still under-developed and solid-state solutions for room temperature service are limited to nano-scale damage repair. Here we propose a new healing strategy of micron-sized damage requiring only short and low temperature heating. This new strategy is based on damage localization particles, which can be healed by fast diffusing atoms of the matrix activated during heat treatment. The healing concept was successfully validated with a com-mercial aluminum alloy and manufactured by Friction Stir Processing (FSP). Damage was demonstrated to initiate on particles that were added to the matrix during material processing. In situ 2D and 3D nano -imaging confirmed healing of the damaged material and showed that heating this material for 10 min at 400 degrees C is sufficient to heal incipient damage with complete filling of 70% of all damage (and up to 90% when their initial size is below 0.2 mu m). Furthermore, strength is retained and the work of fracture of the alloy is improved by about 40% after healing. The proposed Programmed Damage and Repair healing strategy could be extended to other metal based systems presenting precipitation. (C) 2022 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000843502700006 | Publication Date | 2022-08-03 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.4 | Times cited | Open Access | Not_Open_Access | |
Notes | Approved | Most recent IF: 9.4 | |||
Call Number | UA @ admin @ c:irua:190561 | Serial | 7121 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Béché, A.; Gauquelin, N.; Ul-Haq, I.; Bollinger, C.; Demouchy, S.; Verbeeck, J.; Pardoen, T.; Schryvers, D.; Cordier, P. | ||||
Title | On the formation mechanisms of intragranular shear bands in olivine by stress-induced amorphization | Type | A1 Journal article | ||
Year | 2022 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
Volume | 239 | Issue | Pages | 118247-118249 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Intragranular amorphization shear lamellae are found in deformed olivine aggregates. The detailed trans-mission electron microscopy analysis of intragranular lamella arrested in the core of a grain provides novel information on the amorphization mechanism. The deformation field is complex and heteroge-neous, corresponding to a shear crack type instability involving mode I, II and III loading components. The formation and propagation of the amorphous lamella is accompanied by the formation of crystal defects ahead of the tip. These defects are geometrically necessary [001] dislocations, characteristics of high-stress deformation in olivine, and rotational nanodomains which are tentatively interpreted as disclinations. We show that these defects play an important role in dictating the path followed by the amorphous lamella. Stress-induced amorphization in olivine would thus result from a direct crystal-to -amorphous transformation associated with a shear instability and not from a mechanical destabilization due to the accumulation of high number of defects from an intense preliminary deformation. The pref-erential alignment of some lamellae along (010) is a proof of the lower ultimate mechanical strength of these planes.(c) 2022 The Authors. Published by Elsevier Ltd on behalf of Acta Materialia Inc. This is an open access article under the CC BY license ( http://creativecommons.org/licenses/by/4.0/ ) | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000861076600004 | Publication Date | 2022-08-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.4 | Times cited | 5 | Open Access | OpenAccess |
Notes | The QuanTEM microscope was partially funded by the Flemish government. The K2 camera was funded by FWO Hercules fund G0H4316N 'Direct electron detector for soft matter TEM'. A. Beche acknowledges funding from FWO project G093417N ('Compressed sensing enabling low dose imaging in transmission electron microscopy'). H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). This work was supported by the FNRS under Grant PDR – T011322F and by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme under grant agreement No 787,198 Time Man. J-L Rouviere is acknowledged for his support with the GPA softawre. | Approved | Most recent IF: 9.4 | ||
Call Number | UA @ admin @ c:irua:191432 | Serial | 7186 | ||
Permanent link to this record | |||||
Author | Coulombier, M.; Baral, P.; Orekhov, A.; Dohmen, R.; Raskin, J.P.; Pardoen, T.; Cordier, P.; Idrissi, H. | ||||
Title | On-chip very low strain rate rheology of amorphous olivine films | Type | A1 Journal article | ||
Year | 2024 | Publication | Acta materialia | Abbreviated Journal | |
Volume | 266 | Issue | Pages | 119693-12 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Recent observations made by the authors revealed the activation of stress induced amorphization and sliding at grain boundary in olivine [1], a mechanism which is expected to play a pivotal role in the viscosity drop at the lithosphere-asthenosphere boundary and the brittle -ductile transition in the lithospheric mantle. However, there is a lack of information in the literature regarding the intrinsic mechanical properties and the elementary deformation mechanisms of this material, especially at time scales relevant for geodynamics. In the present work, amorphous olivine films were obtained by pulsed laser deposition (PLD). The mechanical response including the rate dependent behavior are investigated using a tension -on -chip (TOC) method developed at UCLouvain allowing to perform creep/relaxation tests on thin films at extremely low strain rates. In the present work, strain rate down to 10-12 s- 1 was reached which is unique. High strain rate sensitivity of 0.054 is observed together with the activation of relaxation at the very early stage of deformation. Furthermore, digital image correlation (DIC), used for the first time on films deformed by TOC, reveals local strain heterogeneities. The relationship between such heterogeneities, the high strain rate sensitivity and the effect of the electron beam in the scanning electron microscope is discussed and compared to the literature. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001170513400001 | Publication Date | 2024-01-17 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 9.4 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 9.4; 2024 IF: 5.301 | |||
Call Number | UA @ admin @ c:irua:204864 | Serial | 9163 | ||
Permanent link to this record | |||||
Author | Schryvers, D.; Ma, Y.; Toth, L.; Tanner, L.E. | ||||
Title | Electron microscopy study of the formation of Ni5Al3 in a Ni62.5Al37.5 B2 alloy: 1: precipitation and growth | Type | A1 Journal article | ||
Year | 1995 | Publication | Acta metallurgica et materialia | Abbreviated Journal | |
Volume | 43 | Issue | 11 | Pages | 4045-4056 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | New York | Editor | ||
Language | Wos | A1995TA33200014 | Publication Date | 2003-12-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0956-7151; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | 27 | Open Access | ||
Notes | Approved | no | |||
Call Number | UA @ lucian @ c:irua:13164 | Serial | 973 | ||
Permanent link to this record | |||||
Author | Schryvers, D.; Ma, Y.; Toth, L.; Tanner, L.E. | ||||
Title | Electron microscopy study of the formation of Ni5Al3 in a Ni62.5Al37.5 B2 alloy: 2: plate crystallography | Type | A1 Journal article | ||
Year | 1995 | Publication | Acta metallurgica et materialia | Abbreviated Journal | |
Volume | 43 | Issue | 11 | Pages | 4057-4065 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | New York | Editor | ||
Language | Wos | A1995TA33200015 | Publication Date | 2003-12-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0956-7151; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | 11 | Open Access | ||
Notes | Approved | no | |||
Call Number | UA @ lucian @ c:irua:13165 | Serial | 974 | ||
Permanent link to this record | |||||
Author | Muto, S.; Schryvers, D.; Merk, N.; Tanner, L.E. | ||||
Title | HREM and ED study of the displacive transformation of the Ni2Al phase in a Ni65Al35 alloy and associated with the martensitic transformation | Type | A1 Journal article | ||
Year | 1993 | Publication | Acta metallurgica et materialia | Abbreviated Journal | |
Volume | 41 | Issue | Pages | 2377-2383 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | New York | Editor | ||
Language | Wos | A1993LN82900011 | Publication Date | 0000-00-00 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0956-7151 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | 31 | Open Access | ||
Notes | Approved | no | |||
Call Number | UA @ lucian @ c:irua:6778 | Serial | 1497 | ||
Permanent link to this record | |||||
Author | Marteleur, M.; Idrissi, H.; Amin-Ahmadi, B.; Prima, F.; Schryvers, D.; Jacques, P.J. | ||||
Title | On the nucleation mechanism of {112} < 111 > mechanical twins in as-quenched beta metastable Ti-12 wt.% Mo alloy | Type | A1 Journal article | ||
Year | 2019 | Publication | Materialia | Abbreviated Journal | |
Volume | 7 | Issue | Pages | Unsp 100418 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Recently developed beta-metastable Ti grades take advantage of the simultaneous activation of TRIP and TWIP effects for enhancing their work hardening rate. However, the role of each plasticity mechanism on the macroscopic mechanical response is still unclear. In this work, the nucleation mechanism of the first activated plasticity mechanism, namely {112} < 111 > twinning, was investigated. Firstly, post-mortem TEM analysis showed that twins nucleate on pre-existing microstructural defects such as thermal jogs with the zonal dislocation mechanism. The precipitation of the omega phase on twin boundaries has been observed, as well as the emission of numerous dislocations from super-jogs present in these twin boundaries. It is also shown that {112} < 111 > twins act as effective dislocation sources for the subsequent plasticity mechanisms such as beta -> alpha '' martensitic transformation and {332} < 111 > twinning. Secondly, in situ TEM tensile testing of the investigated Ti grade highlighted the primary role of the initial defect configuration present in the microstructure. It is shown that twins cannot nucleate without the presence of specific defects allowing the triggering of the dislocation decomposition needed for the twinning mechanism highlighted in investigated bulk samples. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000537131000052 | Publication Date | 2019-07-31 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2589-1529 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | Open Access | |||
Notes | Approved | no | |||
Call Number | UA @ admin @ c:irua:170326 | Serial | 6875 | ||
Permanent link to this record | |||||
Author | Lezaack, M.B.; Hannard, F.; Zhao, L.; Orekhov, A.; Adrien, J.; Miettinen, A.; Idrissi, H.; Simar, A. | ||||
Title | Towards ductilization of high strength 7XXX aluminium alloys via microstructural modifications obtained by friction stir processing and heat treatments | Type | A1 Journal article | ||
Year | 2021 | Publication | Materialia | Abbreviated Journal | |
Volume | 20 | Issue | Pages | 101248 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | High strength 7XXX aluminium series reach exceptional strength, higher than all other industrial aluminium alloys. However, they suffer from a lack of ductility compared to softer series. This work presents a procedure to improve the ductility of 7475 Al alloy in high strength condition, reaching a true fracture strain of 70% at full 500 MPa T6 yield strength. Using friction stir processing (FSP) and post-FSP heat treatments, 100% of industrial rolled material T6 yield stress is maintained but a 180% increase in fracture strain is measured for the processed material. This ductility improvement is studied by in-situ synchrotron X-ray tomography and is explained by the reduction of intermetallic particles size and the homogenization of their spatial distribution. Furthermore, the microstructure after FSP shows equiaxed refined grains which favour crack deviation as opposed to large cracks parallel to the elongated coarse grains in rolled plate. These results are paving the way to better formability and crashworthiness of 7XXX alloys. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000718127100006 | Publication Date | 2021-10-19 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2589-1529 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | Open Access | Not_Open_Access | ||
Notes | Approved | Most recent IF: NA | |||
Call Number | UA @ admin @ c:irua:184145 | Serial | 6894 | ||
Permanent link to this record | |||||
Author | Yang, Z.; Tirry, W.; Schryvers, D. | ||||
Title | Analytical TEM investigations on concentration gradients surrounding Ni4Ti3 precipitates in Ni-Ti shape memory material | Type | A1 Journal article | ||
Year | 2005 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 52 | Issue | 11 | Pages | 1129-1134 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000228190200010 | Publication Date | 2005-03-16 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 49 | Open Access | |
Notes | GOA project; MCRTN-FP6-505226 Multimat | Approved | Most recent IF: 3.747; 2005 IF: 2.228 | ||
Call Number | UA @ lucian @ c:irua:55687 | Serial | 110 | ||
Permanent link to this record | |||||
Author | Li, K.; Béché, A.; Song, M.; Sha, G.; Lu, X.; Zhang, K.; Du, Y.; Ringer, S.P.; Schryvers, D. | ||||
Title | Atomistic structure of Cu-containing \beta" precipitates in an Al-Mg-Si-Cu alloy | Type | A1 Journal article | ||
Year | 2014 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 75 | Issue | Pages | 86-89 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The beta '' precipitates in a peak-aged Al-Mg-Si-Cu alloy were measured with an average composition of 28.6Al-38.7Mg-26.5Si-5.17Cu (at.%) using atom probe tomography. High-angle annular dark-field observations revealed that Cu incompletely substitutes for the Mg-1 and Si-3 columns, preferentially for one column in each pair of Si-3. Cu-free Si columns form a parallelogram-shaped network that constitutes the basis of subsequent precipitates in the system, with a = 0.37 nm, b = 0.38 nm, gamma = 113 degrees and c = 0.405 nm. (C) 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000331025200022 | Publication Date | 2013-12-07 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 22 | Open Access | |
Notes | Approved | Most recent IF: 3.747; 2014 IF: 3.224 | |||
Call Number | UA @ lucian @ c:irua:115749 | Serial | 201 | ||
Permanent link to this record | |||||
Author | Santamarta, R.; Schryvers, D. | ||||
Title | Effect of amorphous-crystalline interfaces on the martensitic transformation in Ti50Ni25Cu25 | Type | A1 Journal article | ||
Year | 2004 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 50 | Issue | Pages | 1423-1427 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000221009500002 | Publication Date | 2004-04-13 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 29 | Open Access | |
Notes | Approved | Most recent IF: 3.747; 2004 IF: 2.112 | |||
Call Number | UA @ lucian @ c:irua:48379 | Serial | 795 | ||
Permanent link to this record | |||||
Author | Shi, H.; Pourbabak, S.; Van Humbeeck, J.; Schryvers, D. | ||||
Title | Electron microscopy study of Nb-rich nanoprecipitates in NiTiNb and their influence on the martensitic transformation | Type | A1 Journal article | ||
Year | 2012 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 67 | Issue | 12 | Pages | 939-942 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Nb-rich nanoprecipitates in the matrix of an annealed commercial NiTiNb alloy are investigated by scanning and transmission electron microscopy, including slice-and-view and chemical analysis. The precipitates have a diameter of around 100 nm, are faceted and have a cube-on-cube relation with the B2 matrix. In situ TEM cooling shows that the martensitic transformation is hampered by the presence of these precipitates. The latter could explain the increase in hysteresis when compared with the binary system. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000311135000005 | Publication Date | 2012-08-27 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 29 | Open Access | |
Notes | Fwo | Approved | Most recent IF: 3.747; 2012 IF: 2.821 | ||
Call Number | UA @ lucian @ c:irua:101486 | Serial | 971 | ||
Permanent link to this record | |||||
Author | Cao, S.; Somsen, C.; Croitoru, M.; Schryvers, D.; Eggeler, G. | ||||
Title | Focused ion beam/scanning electron microscopy tomography and conventional transmission electron microscopy assessment of Ni4Ti3 morphology in compression-aged Ni-rich Ni-Ti single crystals | Type | A1 Journal article | ||
Year | 2010 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 62 | Issue | 6 | Pages | 399-402 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT) | ||||
Abstract | The size, morphology and configuration of Ni4Ti3 precipitates in a single-crystal NiTi alloy have been investigated by two-dimensional transmission electron microscopy-based image analysis and three-dimensional reconstruction from slice-and-view images obtained in a focused ion beam/scanning electron microscopy (FIB/SEM) dual-beam system. Average distances between the precipitates measured along the compression direction correlate well between both techniques, while particle shape and configuration data is best obtained from FIB/SEM. Precipitates form pockets of B2 of 0.54 ìm in the compression direction and 1 ìm perpendicular to the compression direction. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000275072700020 | Publication Date | 2009-12-04 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 16 | Open Access | |
Notes | Fwo | Approved | Most recent IF: 3.747; 2010 IF: 2.820 | ||
Call Number | UA @ lucian @ c:irua:79817 | Serial | 1246 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Ryelandt, L.; Veron, M.; Schryvers, D.; Jacques, P.J. | ||||
Title | Is there a relationship between the stacking fault character and the activated mode of plasticity of FeMn-based austenitic steels? | Type | A1 Journal article | ||
Year | 2009 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 60 | Issue | 11 | Pages | 941-944 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | By changing the testing temperature, an austenitic FeMnAlSi alloy presents either å-martensite transformation or mechanical twinning during straining. In order to understand the nucleation and growth mechanisms involved in both phenomena, defects and particularly stacking faults, were characterized by transmission electron microscopy. It is observed that the character of the stacking faults also changes (from extrinsic to intrinsic) together with the temperature and the activated mode of plasticity. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000265359900005 | Publication Date | 2009-02-10 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 84 | Open Access | |
Notes | Iap | Approved | Most recent IF: 3.747; 2009 IF: 2.949 | ||
Call Number | UA @ lucian @ c:irua:77276 | Serial | 1751 | ||
Permanent link to this record | |||||
Author | Bartova, B.; Schryvers, D.; Yang, Z.; Ignacova, S.; Sittner, P. | ||||
Title | Microstructure and precipitates in as-cast Co38Ni33Al29 shape memory alloy | Type | A1 Journal article | ||
Year | 2007 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 57 | Issue | 1 | Pages | 37-40 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000246632900010 | Publication Date | 2007-04-13 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 22 | Open Access | |
Notes | Approved | Most recent IF: 3.747; 2007 IF: 2.481 | |||
Call Number | UA @ lucian @ c:irua:64753 | Serial | 2059 | ||
Permanent link to this record | |||||
Author | Potapov, P.; Shelyakov, A.; Schryvers, D. | ||||
Title | On the crystal structure of TiNi-Cu martensite | Type | A1 Journal article | ||
Year | 2001 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 44 | Issue | Pages | 1-7 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000166808100001 | Publication Date | 2002-07-25 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 36 | Open Access | |
Notes | Approved | Most recent IF: 3.747; 2001 IF: 1.130 | |||
Call Number | UA @ lucian @ c:irua:48378 | Serial | 2433 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Renard, K.; Schryvers, D.; Jacques, P.J. | ||||
Title | On the relationship between the twin internal structure and the work-hardening rate of TWIP steels | Type | A1 Journal article | ||
Year | 2010 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 63 | Issue | 10 | Pages | 961-964 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | FeMnC and FeMnSiAl TWIP steels deformed under the same conditions exhibit different work-hardening rates. The present study investigates the microstructure of plastically deformed FeMnC and FeMnSiAl samples, particularly the internal structure of the mechanically generated twins and their topology at the grain scale. Twins in the FeMnC steel are finer and full of sessile dislocations, rendering this material distinctly stronger with an improved work-hardening rate. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000282461800003 | Publication Date | 2010-07-20 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 145 | Open Access | |
Notes | Iap | Approved | Most recent IF: 3.747; 2010 IF: 2.820 | ||
Call Number | UA @ lucian @ c:irua:84472 | Serial | 2452 | ||
Permanent link to this record | |||||
Author | Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J. | ||||
Title | On the stress state dependence of the twinning rate and work hardening in twinning-induced plasticity steels | Type | A1 Journal article | ||
Year | 2012 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 66 | Issue | 12 | Pages | 966-971 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The influence of the stress state on the twinning rate and work hardening is studied in the case of an FeMnC TWIP steel strained in uniaxial tension, simple shear and rolling. The resulting stressstrain responses exhibit marked differences. The twinning rate, number of activated twinning systems in each grain, twin thickness and transmission of twins across grain boundaries are dependent on the imposed stress state during straining. Relationships between twin features and macroscopic work hardening rate are established. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000304641500004 | Publication Date | 2012-02-10 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 41 | Open Access | |
Notes | Iap | Approved | Most recent IF: 3.747; 2012 IF: 2.821 | ||
Call Number | UA @ lucian @ c:irua:98374 | Serial | 2454 | ||
Permanent link to this record | |||||
Author | Cao, S.; Pourbabak, S.; Schryvers, D. | ||||
Title | Quantitative 3-D morphologic and distributional study of Ni4Ti3 precipitates in a Ni51Ti49 single crystal alloy | Type | A1 Journal article | ||
Year | 2012 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 66 | Issue | 9 | Pages | 650-653 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The size, shape and distribution of Ni4Ti3 precipitates in Ni51Ti49 single crystals annealed under stress-free and 〈1 1 1〉B2 compressive conditions are studied via focused ion beam/scanning electron microscopy slice-and-view. The precipitates in the stress-free material grow in autocatalytic pockets with larger size, lower number density, flatter shape and larger inter-particle distance than in the compressed material. Nevertheless, a new quantification method called water penetration reveals that, due to the precipitate alignment, martensite can grow more easily in the compressed material perpendicular to the compression direction. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000302425100010 | Publication Date | 2012-01-30 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 8 | Open Access | |
Notes | Fwo | Approved | Most recent IF: 3.747; 2012 IF: 2.821 | ||
Call Number | UA @ lucian @ c:irua:97387 | Serial | 2743 | ||
Permanent link to this record | |||||
Author | Wang, X.; Li, K.; Schryvers, D.; Verlinden, B.; Van Humbeeck, J. | ||||
Title | R-phase transition and related mechanical properties controlled by low-temperature aging treatment in a Ti50.8 at.% Ni thin wire | Type | A1 Journal article | ||
Year | 2014 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 72-73 | Issue | Pages | 21-24 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | A cold-drawn Ti50.8 at.% Ni wire was annealed at 600 °C for 30 min, followed by aging at 250 °C for different times. A microstructure with small grains and nanoscaled precipitates was obtained. The thermally induced martensite transformation is suppressed in the samples aged for 4 h or longer, leaving a one-stage R-phase transition between −150 and +150 °C. The transformation behavior, work output and recovery stress associated with the R-phase transition are presented. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000329148500006 | Publication Date | 2013-10-17 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 27 | Open Access | |
Notes | Fwo | Approved | Most recent IF: 3.747; 2014 IF: 3.224 | ||
Call Number | UA @ lucian @ c:irua:111847 | Serial | 2806 | ||
Permanent link to this record | |||||
Author | Fang, C.M.; van Huis, M.A.; Zandbergen, H.W. | ||||
Title | Stability and structures of the \epsilon-phases of iron nitrides and iron carbides from first principles | Type | A1 Journal article | ||
Year | 2011 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 64 | Issue | 3 | Pages | 296-299 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | First-principles calculations were performed for the ε-phases and other iron carbides/nitrides with hexagonal close-packed Fe sublattices. Although these nitrides/carbides have similar crystal structures, they exhibit different chemical and physical properties. Relative to α-Fe, graphite and N2, all the ε-type nitrides are stable, while all the carbides are metastable. The lattice parameters of the ε-iron nitrides vary differently from those of the ε-carbides, as a function of the concentration of X (Xdouble bond; length as m-dashN, C). The structural relationships of ε-Fe2X with η-Fe2X and ζ-Fe2X are discussed. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000285323300022 | Publication Date | 2010-09-02 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 29 | Open Access | |
Notes | Approved | Most recent IF: 3.747; 2011 IF: 2.699 | |||
Call Number | UA @ lucian @ c:irua:86974 | Serial | 3120 | ||
Permanent link to this record | |||||
Author | Tzedaki, G.; M.; Turner, S.; Godet, S.; De Graeve, I.; Kernig, B.; Hasenclever, J.; Terryn, H. | ||||
Title | Structure and formation mechanism of rolled-in oxide areas on aluminum lithographic printing sheets | Type | A1 Journal article | ||
Year | 2013 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 68 | Issue | 5 | Pages | 233-236 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The subsurface area introduced during rolling on the 1100 aluminum alloy series alters its surface properties, which makes it more susceptible to corrosion. A combination of different transmission electron microscopy techniques is employed to observe the orientation of small grain structures and the distribution elements in the subsurface layer. This approach provided valuable insight into the formation mechanism of the layer and the phenomena taking place during rolling. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Oxford | Editor | ||
Language | Wos | 000314012000003 | Publication Date | 2012-10-23 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 6 | Open Access | |
Notes | Fwo | Approved | Most recent IF: 3.747; 2013 IF: 2.968 | ||
Call Number | UA @ lucian @ c:irua:105288 | Serial | 3277 | ||
Permanent link to this record |