Home << 1 2 3 4 5 6 7 8 >>
List View
 | 
Citations
 | 
Details
   web
Records
Author Blank, D.H.A.; Rijnders, A.J.H.M.; Verhoeven, M.A.J.; Bergs, R.M.H.; Rogalla, H.; Verbist, K.; Lebedev, O.; Van Tendeloo, G.
Title Characterisation of multilayer ramp-type REBa2Cu3O7-\delta structures by scanning probe microscopy and high-resolution electron microscopy Type A1 Journal article
Year 1997 Publication Journal of alloys and compounds T2 – Symposium on High Temperature Superconductor Thin Films, Growth, Mechanisms, Interfaces, Multilayers, at the 1996 Spring Meeting of the European-Materials-Society, June 04-07, 1996, Strasbourg, France Abbreviated Journal J Alloy Compd
Volume 251 Issue (down) 1-2 Pages 206-208
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract We studied the morphology of ramps in REBa2CU3O7 (REBCO) epitaxial films on SrTiO3 substrates, fabricated by RF magnetron sputter deposition and pulsed laser deposition (PLD), by scanning probe microscopy (SPM) and high resolution electron microscopy (HREM). The ramps were fabricated by Ar ion beam etching using masks of standard photoresist and TIN. AFM-studies on ramps in sputter deposited films show a strong dependence, i.e. formation of facets and ridges, on the angle of incidence of the ion beam with respect to the substrate surface as well as the rotation angle with respect to the crystal axes of the substrate. Ramps in pulsed laser deposited films did not show this dependence, Furthermore, we studied the effect of an anneal step prior to the deposition of barrier layers (i.e. PrBa2CU3O7, SrTiO3, CeO2) on the ramp. First results show a recrystallization of the ramp surface, resulting in terraces and a non-homogeneous growth of the barrier material on top of it. The thickness variations, for thin layers of barrier material, con even become much larger than expected from the amount of deposited material and are dependent on the deposition and anneal conditions. HREM studies show a well defined interface between barrier layer and electrodes. The angle of the ramp depends on the etch rate of the mask and REBCO, and on the angle of incidence of the ion beam. TiN has a much lower etch rate compared to photoresist, resulting in an angle of the ramp comparable to the angle of incidence, resulting in a low etching rate on the ramp. These results will lead to improved electrical characteristics of ramp-type junctions.
Address
Corporate Author Thesis
Publisher Elsevier Science Place of Publication Lausanne Editor
Language Wos A1997XM34000046 Publication Date 2002-07-25
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0925-8388; ISBN Additional Links UA library record; WoS full record
Impact Factor 3.133 Times cited Open Access
Notes Approved Most recent IF: 3.133; 1997 IF: 1.035
Call Number UA @ lucian @ c:irua:95868 Serial 310
Permanent link to this record
 
 
Author Habermeier, H.U.; Razavi, F.; Lebedev, O.; Gross, G.M.; Praus, R.; Zhang, P.X.
Title Correlation of microstructure and magnetotransport properties of epitaxially grown La-Ca-Mn-O3 thin films Type A1 Journal article
Year 1999 Publication Physica status solidi: B: basic research T2 – International Conference on Solid State Spectroscopy – (ICSSS), SEP 05-07, 1999, SCHWABISCH-GMUND, GERMANY Abbreviated Journal Phys Status Solidi B
Volume 215 Issue (down) 1 Pages 679-683
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract We have investigated epitaxially grown single-crystalline Ca-doped LaMnO3 thin films using the pulsed laser deposition technique in a case study aimed to explore the possibilities buried in epitaxial stress tailoring in order to control the transport properties of CMR materials beyond the limits set by equilibrium thermodynamics. Depending on the film thickness there is an abrupt transition from pseudomorphic to epitaxial granular growth observable which is related to the epitaxial strain of the films. This is associated with microscopic stress relaxation and leads to well controllable modifications of the atomic arrangements of the Mn-O sublattice in the films. Due to the interrelation of double exchange, spin-, charge- and orbital ordering and the Jahn-Teller effect mediated coupling of the electronic system to the crystal lattice, the magnetotransport properties of the firms can be modified in a controllable way.
Address
Corporate Author Thesis
Publisher Place of Publication Berlin Editor
Language Wos 000082487800110 Publication Date 2002-09-10
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0370-1972;1521-3951; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.674 Times cited 3 Open Access
Notes Approved Most recent IF: 1.674; 1999 IF: 0.978
Call Number UA @ lucian @ c:irua:103489 Serial 527
Permanent link to this record
 
 
Author Blumenau, A.T.; Jones, R.; Frauenheim, T.; Willems, B.; Lebedev, O.I.; Van Tendeloo, G.; Fisher, D.; Martineau, P.M.
Title Dislocations in diamond : dissociation into partials and their glide motion Type A1 Journal article
Year 2003 Publication Physical review : B : condensed matter and materials physics Abbreviated Journal Phys Rev B
Volume 68 Issue (down) 1 Pages 014115-14119
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract The dissociation of 60degrees and screw dislocations in diamond is modeled in an approach combining isotropic elasticity theory with ab initio-based tight-binding total-energy calculations. Both dislocations are found to dissociate with a substantial lowering of their line energies. For the 60degrees dislocation, however, an energy barrier to dissociation is found. We investigate the core structure of a screw dislocation distinguishing “shuffle,” “mixed,” and “glide” cores. The latter is found to be the most stable undissociated screw dislocation. Further, the glide motion of 90degrees and 30degrees partials is discussed in terms of a process involving the thermal formation and subsequent migration of kinks along the dislocation line. The calculated activation barriers to dislocation motion show that the 30degrees partial is less mobile than the 90degrees partial. Finally, high-resolution electron microscopy is performed on high-temperature, high-pressure annealed natural brown diamond, allowing the core regions of 60degrees dislocations to be imaged. The majority of dislocations are found to be dissociated. However, in some cases, undissociated 60degrees dislocations were also observed.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000184582900050 Publication Date 2003-08-01
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0163-1829;1095-3795; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.836 Times cited 39 Open Access
Notes Approved Most recent IF: 3.836; 2003 IF: NA
Call Number UA @ lucian @ c:irua:103800 Serial 734
Permanent link to this record
 
 
Author Neira, I.S.; Kolen'ko, Y.V.; Lebedev, O.I.; Van Tendeloo, G.; Gupta, H.S.; Guitián, F.; Yoshimura, M.
Title An effective morphology control of hydroxyapatite crystals via hydrothermal synthesis Type A1 Journal article
Year 2009 Publication Crystal growth & design Abbreviated Journal Cryst Growth Des
Volume 9 Issue (down) 1 Pages 466-474
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract A facile urea-assisted hydrothermal synthesis and systematic characterization of hydroxyapatite (HA) with calcium nitrate tetrahydrate and diammonium hydrogen phosphate as precursors are reported. The advantage of the proposed technique over previously reported synthetic approaches is the simple but precise control of the HA crystals morphology, which is achieved by employing an intensive, stepwise, and slow thermal decomposition of urea as well as varying initial concentrations of starting reagents. Whereas the plate-, hexagonal prism- and needle-like HA particles preferentially growth along the c-axis, the smaller and fine-plate-like HA crystals demonstrate crystal growth along the (102) and (211) directions, uncommon for HA. Furthermore, it was established that the hydrothermally derived powdered products are phase-pure HA containing CO32− anions in the crystal lattice, that is, AB-type carbonated hydroxyapatite. Transmission electron microscopy (TEM) and electron diffraction (ED) of selected samples reveal that the as-prepared HA crystals are single-crystalline and exhibit a nearly defect-free microstructure. The hardness and elastic modulus of the hexagonal prism-like HA crystals have been investigated on a nanoscale using the nanoindentation technique; the observed trends are discussed.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000262332700073 Publication Date 2008-11-21
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1528-7483;1528-7505; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 4.055 Times cited 183 Open Access
Notes Esteem 026019 Approved Most recent IF: 4.055; 2009 IF: 4.162
Call Number UA @ lucian @ c:irua:75740 Serial 853
Permanent link to this record
 
 
Author Laffez, P.; Lebedev, O.I.; Ruello, P.; Desfeux, R.; Banerjee, G.; Capon, F.
Title Evidence of strain induced structural change in hetero-epitaxial NdNiO3 thin films with metal-insulator transition Type A1 Journal article
Year 2004 Publication European physical journal: applied physics Abbreviated Journal Eur Phys J-Appl Phys
Volume 25 Issue (down) 1 Pages 25-31
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Neodymium nickelate thin films have been prepared on NdGaO3 substrates by RF magnetron sputtering and post-annealing treatment under oxygen pressure. Transport properties are found to depend strongly on film thickness. Thick films show transport properties close to bulk ceramics, while very thin films exhibit a large transition from metal to insulator which occurs over a wide temperature range with high resistivity. Structure and surface morphology of the films have been investigated by Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM). Thin films (approximate to17 nm) grow heteroepitaxially, while thicker films (approximate to73 nm) show a granular structure. The thinnest sample suggests a symmetry change induced by the epitaxial strain of the substrate. This paper discusses the relationship between microstructure and transport properties.
Address
Corporate Author Thesis
Publisher Place of Publication Paris Editor
Language Wos 000187286000003 Publication Date 2003-12-15
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1286-0042;1286-0050; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 0.684 Times cited 12 Open Access
Notes Approved Most recent IF: 0.684; 2004 IF: 0.745
Call Number UA @ lucian @ c:irua:103256 Serial 1096
Permanent link to this record
 
 
Author Nikolaichik, V.I.; Amelinckx, S.; Klinkova, L.A.; Barkovskii, N.V.; Lebedev, O.I.; Van Tendeloo, G.
Title HREM study of compounds in the Bi-rich part of the Ba-Bi-O system Type A1 Journal article
Year 2002 Publication Journal of solid state chemistry Abbreviated Journal J Solid State Chem
Volume 163 Issue (down) 1 Pages 44-64
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication London Editor
Language Wos 000173611000008 Publication Date 2002-09-18
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0022-4596; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.299 Times cited 13 Open Access
Notes Approved Most recent IF: 2.299; 2002 IF: 1.671
Call Number UA @ lucian @ c:irua:54713 Serial 1509
Permanent link to this record
 
 
Author Stevens, W.J.J.; Meynen, V.; Bruijn, E.; Lebedev, O.I.; Van Tendeloo, G.; Cool, P.; Vansant, E.F.
Title Mesoporous material formed by acidic hydrothermal assembly of silicalite-1 precursor nanoparticles in the absence of meso-templates Type A1 Journal article
Year 2008 Publication Microporous and mesoporous materials: zeolites, clays, carbons and related materials Abbreviated Journal Micropor Mesopor Mat
Volume 110 Issue (down) 1 Pages 77-85
Keywords A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000254056200010 Publication Date 2007-09-13
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1387-1811; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.615 Times cited 21 Open Access
Notes Fwo; Crp; Inside-Pores Approved Most recent IF: 3.615; 2008 IF: 2.555
Call Number UA @ lucian @ c:irua:68229 Serial 1998
Permanent link to this record
 
 
Author Gao, J.; Lebedev, O.I.; Turner, S.; Li, Y.F.; Lu, Y.H.; Feng, Y.P.; Boullay, P.; Prellier, W.; Van Tendeloo, G.; Wu, T.
Title Phase selection enabled formation of abrupt axial heterojunctions in branched oxide nanowires Type A1 Journal article
Year 2012 Publication Nano letters Abbreviated Journal Nano Lett
Volume 12 Issue (down) 1 Pages 275-280
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Rational synthesis of nanowires via the vaporliquidsolid (VLS) mechanism with compositional and structural controls is vitally important for fabricating functional nanodevices from bottom up. Here, we show that branched indium tin oxide nanowires can be in situ seeded in vapor transport growth using tailored AuCu alloys as catalyst. Furthermore, we demonstrate that VLS synthesis gives unprecedented freedom to navigate the ternary InSnO phase diagram, and a rare and bulk-unstable cubic phase can be selectively stabilized in nanowires. The stabilized cubic fluorite phase possesses an unusual almost equimolar concentration of In and Sn, forming a defect-free epitaxial interface with the conventional bixbyite phase of tin-doped indium oxide that is the most employed transparent conducting oxide. This rational methodology of selecting phases and making abrupt axial heterojunctions in nanowires presents advantages over the conventional synthesis routes, promising novel composition-modulated nanomaterials.
Address
Corporate Author Thesis
Publisher Place of Publication Washington Editor
Language Wos 000298943100048 Publication Date 2011-12-05
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1530-6984;1530-6992; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 12.712 Times cited 25 Open Access
Notes Fwo Approved Most recent IF: 12.712; 2012 IF: 13.025
Call Number UA @ lucian @ c:irua:94209 Serial 2587
Permanent link to this record
 
 
Author Philippaerts, A.; Paulussen, S.; Turner, S.; Lebedev, O.I.; Van Tendeloo, G.; Poelman, H.; Bulut, M.; de Clippel, F.; Smeets, P.; Sels, B.; Jacobs, P.
Title Selectivity in sorption and hydrogenation of methyl oleate and elaidate on MFI zeolites Type A1 Journal article
Year 2010 Publication Journal of catalysis Abbreviated Journal J Catal
Volume 270 Issue (down) 1 Pages 172-184
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Different zeolites were tested for selective removal of methyl elaidate (trans isomer) from an equimolar mixture with methyl oleate (cis isomer). Sorption experiments of the geometric isomers show that only ZSM-5 samples with reduced Al content in the framework are able to discriminate among the bent cis and the linear trans fatty acid methyl esters. Hydrogenation experiments of equimolar methyl oleate and elaidate mixtures at low temperature (65 °C) and high hydrogen pressure (6.0 MPa), using Pt catalysts, confirm this result. Only with a Pt/NaZSM-5 catalyst outspoken selectivity for the hydrogenation of the trans isomer is obtained. In order to prepare a selective Pt/ZSM-5 catalyst, the influence of Pt addition (impregnation, ion-exchange and competitive ion-exchange) and Pt activation (different calcination and reduction temperatures) on the Pt-distribution and Pt particle size was investigated using SEM, bright-field and HR TEM, EDX, electron tomography, CO-chemisorption, XPS, XRD, and UVvis measurements. The best result in terms of hydrogenation activity and selectivity is obtained with a Pt/ZSM-5 catalyst, which is prepared via competitive ion-exchange, followed by slow calcination up to 350 °C under high O2 flow and a reduction up to 500 °C under H2. This preparation method leads to a Pt/ZSM-5 catalyst with the best Pt distribution and the smallest Pt clusters occluded in the zeolite structure. Finally, the influence of zeolite crystal size, morphology, and elemental composition of ZSM-5 on hydrogenation activity and selectivity was investigated in detail.
Address
Corporate Author Thesis
Publisher Place of Publication San Diego, Calif. Editor
Language Wos 000275966100021 Publication Date 2010-01-28
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0021-9517; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 6.844 Times cited 24 Open Access
Notes FWO; IAP-IV; Methusalem Approved Most recent IF: 6.844; 2010 IF: 5.415
Call Number UA @ lucian @ c:irua:82435 Serial 2970
Permanent link to this record
 
 
Author Morozov, V.A.; Lazoryak, B.I.; Lebedev, O.I.; Amelinckx, S.; Van Tendeloo, G.
Title Structures of three polymorphs of the complex oxide K5Yb(MoO4)4 Type A1 Journal article
Year 2003 Publication Journal of solid state chemistry Abbreviated Journal J Solid State Chem
Volume 176 Issue (down) 1 Pages 76-87
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication London Editor
Language Wos 000186711300012 Publication Date 2003-10-09
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0022-4596; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.299 Times cited 8 Open Access
Notes Approved Most recent IF: 2.299; 2003 IF: 1.413
Call Number UA @ lucian @ c:irua:54716 Serial 3322
Permanent link to this record
 
 
Author Abakumov, A.M.; Rozova, M.G.; Pavlyuk, B.P.; Lobanov, M.V.; Antipov, E.V.; Lebedev, O.I.; Van Tendeloo, G.; Sheptyakov, D.V.; Balagurov, A.M.; Bourée, F.
Title Synthesis and crystal structure of novel layered manganese oxide Ca2MnGaO5+\delta Type A1 Journal article
Year 2001 Publication Journal of solid state chemistry Abbreviated Journal J Solid State Chem
Volume 158 Issue (down) 1 Pages 100-111
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication London Editor
Language Wos 000168441500015 Publication Date 2002-09-18
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0022-4596; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.299 Times cited 48 Open Access
Notes Approved Most recent IF: 2.299; 2001 IF: 1.614
Call Number UA @ lucian @ c:irua:54707 Serial 3425
Permanent link to this record
 
 
Author Bigiani, L.; Gasparotto, A.; Andreu, T.; Verbeeck, J.; Sada, C.; Modin, E.; Lebedev, O.I.; Morante, J.R.; Barreca, D.; Maccato, C.
Title Au-manganese oxide nanostructures by a plasma-assisted process as electrocatalysts for oxygen evolution : a chemico-physical investigation Type A1 Journal article
Year 2020 Publication Advanced sustainable systems Abbreviated Journal
Volume Issue (down) Pages 2000177-11
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Earth-abundant and eco-friendly manganese oxides are promising platforms for the oxygen evolution reaction (OER) in water electrolysis. Herein, a versatile and potentially scalable route to gold-decorated manganese oxide-based OER electrocatalysts is reported. In particular, MnxOy(MnO2, Mn2O3) host matrices are grown on conductive glasses by plasma assisted-chemical vapor deposition (PA-CVD), and subsequently functionalized with gold nanoparticles (guest) as OER activators by radio frequency (RF)-sputtering. The final selective obtainment of MnO2- or Mn2O3-based systems is then enabled by annealing under oxidizing or inert atmosphere, respectively. A detailed material characterization evidences the formation of high-purity Mn(x)O(y)dendritic nanostructures with an open morphology and an efficient guest dispersion into the host matrices. The tailoring of Mn(x)O(y)phase composition and host-guest interactions has a remarkable influence on OER activity yielding, for the best performing Au/Mn(2)O(3)system, a current density of approximate to 5 mA cm(-2)at 1.65 V versus the reversible hydrogen electrode (RHE) and an overpotential close to 300 mV at 1 mA cm(-2). Such results, comparing favorably with literature data on manganese oxide-based materials, highlight the importance of compositional control, as well as of surface and interface engineering, to develop low-cost and efficient anode nanocatalysts for water splitting applications.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000572376000001 Publication Date 2020-09-25
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 2366-7486 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 7.1 Times cited 4 Open Access Not_Open_Access
Notes ; Padova University (DOR 2017-2019 and P-DiSC #03BIRD2018-UNIPD OXYGENA projects), as well as the INSTM Consortium (INSTMPD004 – NETTUNO project) and AMGA Foundation (Mn4Energy project), are gratefully acknowledged for financial support. The Qu-Ant-EM microscope was partially funded by the Hercules fund from the Flemish Government. J.V. acknowledges funding from a GOA project “Solarpaint” from the University of Antwerp and from EU H2020 823717 ESTEEM3 project. The authors thank Dr. Daniele Valbusa, Dr. Gianluca Corr, Dr. Andrea Gallo, and Dr. Dileep Khrishnan for helpful experimental assistance. ; esteem3TA; esteem3reported Approved Most recent IF: 7.1; 2020 IF: NA
Call Number UA @ admin @ c:irua:171937 Serial 6457
Permanent link to this record
 
 
Author Bigiani, L.; Barreca, D.; Gasparotto, A.; Andreu, T.; Verbeeck, J.; Sada, C.; Modin, E.; Lebedev, O.I.; Morante, J.R.; Maccato, C.
Title Selective anodes for seawater splitting via functionalization of manganese oxides by a plasma-assisted process Type A1 Journal article
Year 2021 Publication Applied Catalysis B-Environmental Abbreviated Journal Appl Catal B-Environ
Volume 284 Issue (down) Pages 119684
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract The electrolysis of seawater, a significantly more abundant natural reservoir than freshwater, stands as a promising alternative for sustainable hydrogen production, provided that the competitive chloride electro-oxidation is minimized. Herein, we propose an original material combination to selectively trigger oxygen evolution from seawater at expenses of chlorine generation. The target systems, based on MnO2 or Mn2O3 decorated with Fe2O3 or Co3O4, are fabricated by plasma enhanced-chemical vapor deposition of manganese oxides, functionalization with Fe2O3 and Co3O4 by sputtering, and annealing in air/Ar to obtain Mn(IV)/Mn(III) oxides. Among the various options, MnO2 decorated with Co3O4 yields the best performances in alkaline seawater splitting, with an outstanding Tafel slope of approximate to 40 mV x dec(-1) and an overpotential of 450 mV, enabling to rule out chlorine evolution. These attractive performances, resulting from the synergistic contribution of catalytic and electronic effects, open the door to low-cost hydrogen generation from seawater under real-world conditions, paving the way to eventual large-scale applications.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000623591500008 Publication Date 2020-11-20
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0926-3373 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 9.446 Times cited 67 Open Access OpenAccess
Notes The authors thank Padova University (DOR 2017–2020 and P-DiSC #03BIRD2018-UNIPD OXYGENA projects), as well as the INSTM Consortium (INSTMPD004 – NETTUNO project) and AMGA Foundation (Mn4Energy project), for financial support. The Qu-Ant-EM microscope was partly funded by the Hercules fund from the Flemish Government. J.V. acknowledges funding from a GOA project 'Solarpaint' (University of Antwerp) and from the EU-H2020 programme (grant agreement No. 823717 – ESTEEM3). J.R.M. and T.A. acknowledge Generalitat de Catalunya for financial support through the CERCA Programme, 27 M2E (2017SGR1246) and by ERDEF-MINECO coordinated projects ENE2017-85087-C3 and ENE2016-80788-C5-5-R. Thanks are also due to Proff. Gloria Tabacchi and Ettore Fois (Department of Science and High Technology, Insubria University, Como, Italy) for valuable discussions and support. Dr. Daniele Valbusa, Dr. Gianluca Corrò, Dr. Andrea Gallo and Dr. Dileep Khrishnan are gratefully acknowledged for helpful technical assistance. Approved Most recent IF: 9.446
Call Number UA @ admin @ c:irua:176718 Serial 6733
Permanent link to this record
 
 
Author de Gryse, O.; Vanhellemont, J.; Clauws, P.; Lebedev, O.; van Landuyt, J.; Simoen, E.; Claeys, C.
Title A novel approach to analyse FTIR spectra of precipitates in boron-doped silicon Type A1 Journal article
Year 2003 Publication Physica: B : condensed matter T2 – 22nd International Conference on Defects in Semiconductors (ICDS-22), JUL 28-AUG 01, 2003, UNIV AARHUS, AARHUS, DENMARK Abbreviated Journal Physica B
Volume 340 Issue (down) Pages 1013-1017
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Infrared absorption spectra of composite precipitates are analysed with a modified Day-Thorpe algorithm, assuming a precipitated phase consisting of a mixture of two components with known optical properties. Additional constraints are introduced when solving the model equations by using a priori knowledge making the algorithm more reliable. It is shown that this novel approach allows determining both morphology and composition of precipitates. The method is applied to characterise oxide precipitates in boron-doped silicon. The results indicate that for the resistivity range above 60 mOmegacm, the precipitated phase is most probably SiO1.17+/-0.14, while for resistivities below 20 mOmega cm, precipitates consist of a SiO2/B2O3 composite with a large volume fraction of B(2)0(3) (up to 40% for 8 mOmegacm material). (C) 2003 Elsevier B.V. All rights reserved.
Address
Corporate Author Thesis
Publisher Place of Publication Amsterdam Editor
Language Wos 000188300200213 Publication Date 2003-11-24
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0921-4526; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.386 Times cited 4 Open Access
Notes Approved Most recent IF: 1.386; 2003 IF: 0.908
Call Number UA @ lucian @ c:irua:103784 Serial 25
Permanent link to this record
 
 
Author Geuens, P.; Lebedev, O.I.; van Dyck, D.; Van Tendeloo, G.
Title Accurate measurements of atomic displacements in La0.9Sr0.1MnO3 thin films grown on a SrTiO3 substrate Type H3 Book chapter
Year 2000 Publication Abbreviated Journal
Volume Issue (down) Pages 1133-1134
Keywords H3 Book chapter; Electron microscopy for materials research (EMAT); Vision lab
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication s.l. Editor
Language Wos Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:54730 Serial 49
Permanent link to this record
 
 
Author Collart, O.; Cool, P.; van der Voort, P.; Meynen, V.; Vansant, E.F.; Houthoofd, K.J.; Grobet, P.J.; Lebedev, O.I.; Van Tendeloo, G.
Title Aluminum incorporation into MCM-48 toward the creation of Brønsted acidity Type A1 Journal article
Year 2004 Publication The journal of physical chemistry : B : condensed matter, materials, surfaces, interfaces and biophysical Abbreviated Journal J Phys Chem B
Volume 108 Issue (down) Pages 13905-13912
Keywords A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Washington, D.C. Editor
Language Wos 000224164000003 Publication Date 2004-09-09
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1520-6106;1520-5207; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.177 Times cited 13 Open Access
Notes Fwo; Iuap P5/01 Approved Most recent IF: 3.177; 2004 IF: 3.834
Call Number UA @ lucian @ c:irua:49014 Serial 92
Permanent link to this record
 
 
Author Stefanovich, S.Y.; Belik, A.A.; Azuma, M.; Takano, M.; Baryshnikova, O.V.; Morozov, V.A.; Lazoryak, B.I.; Lebedev, O.I.; Van Tendeloo, G.
Title Antiferroelectric phase transition in Sr9In(PO4)7 Type A1 Journal article
Year 2004 Publication Physical review : B : condensed matter and materials physics Abbreviated Journal Phys Rev B
Volume 70 Issue (down) Pages 172103,1-4
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Lancaster, Pa Editor
Language Wos 000225477000003 Publication Date 2004-11-12
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1098-0121;1550-235X; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.836 Times cited 17 Open Access
Notes Iuap P5/01 Approved Most recent IF: 3.836; 2004 IF: 3.075
Call Number UA @ lucian @ c:irua:54744 Serial 135
Permanent link to this record
 
 
Author Van Tendeloo, G.; Lebedev, O.I.; Amelinckx, S.
Title Atomic and microstructure of CMR materials Type A1 Journal article
Year 2000 Publication Journal of magnetism and magnetic materials Abbreviated Journal J Magn Magn Mater
Volume 211 Issue (down) Pages 73-83
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Amsterdam Editor
Language Wos 000085772100013 Publication Date 2002-07-25
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0304-8853; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.63 Times cited 48 Open Access
Notes Iuap 4-10 Approved Most recent IF: 2.63; 2000 IF: 0.996
Call Number UA @ lucian @ c:irua:54773 Serial 165
Permanent link to this record
 
 
Author Mahieu, S.; Ghekiere, P.; de Winter, G.; de Gryse, R.; Depla, D.; Lebedev, O.I.
Title Biaxially aligned yttria stabilized zirconia and titanium nitride layers deposited by unbalanced magnetron sputtering Type A1 Journal article
Year 2005 Publication Diffusion and defect data : solid state data : part B : solid state phenomena T2 – 2nd International Conference on Texture and Anisotropy of Polycrystals, JUL 07-09, 2004, Metz, FRANCE Abbreviated Journal
Volume 105 Issue (down) Pages 447-452
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Control of the texture and the biaxial alignment of sputter deposited films has provoked a great deal of interest due to its technological importance. indeed, many physical properties of thin films are influenced by the biaxial alignment. In this context, extensive research has been established to understand the growth mechanism of biaxially aligned Yttria Stabilized Zirconia (YSZ) as a buffer layer for high temperature superconducting copper oxides. In this work, the growth mechanism in general and the mechanism responsible of the biaxial alignment in detail were investigated for thin films of YSZ and TiN deposited by unbalanced magnetron sputtering using non-aligned polycrystalline stainless steel substrates. The mechanism responsible for the preferential out-of-plane alignment has been investigated by performing depositions on a non-tilted substrate. However, to study the in-plane alignment a tilted substrate was used. The microstructure of the deposited layers was characterised by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The crystallographic alignment has been investigated by X-ray diffraction (XRD) (angular scans and pole figures) and by Selective Area Diffraction (SAD). It was observed that the deposited layers show a zone T or zone II structure and the layers with a zone T structure consist of faceted grains. There seems to be a correlation between the crystal habit of these faceted grains and the measured biaxial alignment. A model for the preferential out-of-plane orientation, the in-plane alignment and the correlation between the microstructure and the biaxial alignment is proposed.
Address
Corporate Author Thesis
Publisher Place of Publication Vaduz Editor
Language Wos Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 3-908451-09-4 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:103190 Serial 230
Permanent link to this record
 
 
Author De Gryse, O.; Clauws, P.; Vanhellemont, J.; Lebedev, O.; van Landuyt, J.; Simoen, E.; Claeys, C.
Title Chemical and structural characterization of oxide precipitates in heavily boron doped silicon by infrared spectroscopy and transmission electron microscopy Type P1 Proceeding
Year 2002 Publication Abbreviated Journal
Volume Issue (down) Pages 183-194
Keywords P1 Proceeding; Electron microscopy for materials research (EMAT)
Abstract Infrared absorption spectra of oxygen precipitates in boron doped silicon with a boron concentration between 10(17) and 10(19) cm(-3) are analyzed, applying the spectral function theory of the composite precipitates. The aspect ratio of the platelet precipitates has been determined by transmission electron microscopy measurements. Our analysis shows that in samples with moderate doping levels (<10(18) B cm(-3)) SiOgamma precipitates are formed with stoichiometry as in the lightly doped case. In the heavily (>10(18) cm(-3)) boron doped samples, however, the measured spectra of the precipitates are consistent with a mixture of SiO2 and B2O3. with a volume fraction of B2O3 as high as 0.41 in the most heavily doped case.
Address
Corporate Author Thesis
Publisher Place of Publication S.l. Editor
Language Wos Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1-56677-344-X ISBN Additional Links UA library record; WoS full record;
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:94950 Serial 344
Permanent link to this record
 
 
Author de Gryse, O.; Clauws, P.; Lebedev, O.; van Landuyt, J.; Vanhellemont, J.; Claeys, C.; Simoen, E.
Title Chemical and structural characterization of oxygen precipitates in silicon by infrared spectroscopy and TEM Type A1 Journal article
Year 2001 Publication Physica: B : condensed matter T2 – 21st International Conference on Defects in Semiconductors, JUL 16-20, 2001, GIESSEN, GERMANY Abbreviated Journal Physica B
Volume 308 Issue (down) Pages 294-297
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Infrared absorption spectra of polyhedral and platelet oxygen precipitates are analyzed using a modified Day-Thorpe approach (J. Phys.: Condens. Matter 11 (1999) 2551). The aspect ratio has been determined by TEM measurements. The reduced spectral function and the stoichiometry are extracted from the absorption spectra and the concentration of precipitated interstitial oxygen. One set of spectra reveal a Frohlich frequency around 1100 cm(-1) and another around 1110-1120 cm(-1). It is shown that the shift in the Frohlich frequency is not due to a different stoichiometry, but due to the detailed structure in the reduced spectral function. The oxygen precipitates consist of SiO. with gammaapproximate to1.1-1.2+/-0.1. (C) 2001 Elsevier Science B.V. All rights reserved.
Address
Corporate Author Thesis
Publisher Elsevier science bv Place of Publication Amsterdam Editor
Language Wos 000173660100073 Publication Date 2002-10-15
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0921-4526; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.386 Times cited 3 Open Access
Notes Approved Most recent IF: 1.386; 2001 IF: 0.663
Call Number UA @ lucian @ c:irua:103389 Serial 345
Permanent link to this record
 
 
Author Cassiers, K.; Linssen, T.; Aerts, K.; Cool, P.; Lebedev, O.; Van Tendeloo, G.; van Grieken, R.; Vansant, E.F.
Title Controlled formation of amine-templated mesostructured zirconia with remarkably high thermal stability Type A1 Journal article
Year 2003 Publication Journal of materials chemistry Abbreviated Journal J Mater Chem
Volume 13 Issue (down) Pages 3033-3039
Keywords A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA); AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Cambridge Editor
Language Wos 000186907500040 Publication Date 2003-11-26
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0959-9428;1364-5501; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 26 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:43522 Serial 502
Permanent link to this record
 
 
Author Moshnyaga, V.; Damaschke, B.; Shapoval, O.; Belenchuk, A.; Faupel, J.; Lebedev, O.I.; Verbeeck, J.; Van Tendeloo, G.; Mücksch, M.; Tsurkan, V.; Tidecks, R.; Samwer, K.
Title Corrigendum: Structural phase transition at the percolation threshold in epitaxial (La0.7Ca0.3MnO3)1-x:(MgO)x nanocomposite films Type A1 Journal article
Year 2005 Publication Nature materials Abbreviated Journal Nat Mater
Volume 4 Issue (down) Pages 104
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication London Editor
Language Wos Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1476-1122 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 39.737 Times cited Open Access
Notes Approved Most recent IF: 39.737; 2005 IF: 15.941
Call Number UA @ lucian @ c:irua:54856 Serial 530
Permanent link to this record
 
 
Author Abakumov, A.M.; Shpanchenko, R.V.; Antipov, E.V.; Lebedev, O.I.; Van Tendeloo, G.
Title The crystal structure of Ca3ReO6 Type A1 Journal article
Year 1997 Publication Journal of solid state chemistry Abbreviated Journal J Solid State Chem
Volume 131 Issue (down) Pages 305-309
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication London Editor
Language Wos A1997XQ33000014 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0022-4596 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.299 Times cited 10 Open Access
Notes Approved Most recent IF: 2.299; 1997 IF: 1.486
Call Number UA @ lucian @ c:irua:21442 Serial 571
Permanent link to this record
 
 
Author Lebedev, O.; Van Tendeloo, G.; Marezio, M.; Licci, F.; Gilioli, E.; Gauzzi, A.; Prodi, A.
Title The crystal structure of YSr2Cu3O6+x determined by HREM Type H3 Book chapter
Year 2002 Publication Abbreviated Journal
Volume Issue (down) Pages 877-878
Keywords H3 Book chapter; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication s.l. Editor
Language Wos Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:54842 Serial 572
Permanent link to this record
 
 
Author Lebedev, O.I.; Van Tendeloo, G.
Title Crystalline and amorphous frameworks with giant pores: what information ca we expect from advanced TEM? Type P1 Proceeding
Year 2008 Publication Electron microscopy and multiscale modeling: proceedings of the AIP conference proceedings Abbreviated Journal
Volume 999 Issue (down) Pages 245-256
Keywords P1 Proceeding; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:69153 Serial 580
Permanent link to this record
 
 
Author Zhigalina, O.M.; Mishina, E.D.; Sherstyuk, N.E.; Vorotilov, K.A.; Vasiljev, V.A.; Sigov, A.S.; Lebedev, O.I.; Grigoriev, Y.V.; de Santo, M.P.; Barberi, R.; Rasing, T.
Title Crystallization of PZT in porous alumina membrane channels Type A1 Journal article
Year 2006 Publication Ferroelectrics Abbreviated Journal Ferroelectrics
Volume 336 Issue (down) Pages 247-254
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication London Editor
Language Wos 000239567500030 Publication Date 2006-07-27
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0015-0193;1563-5112; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 0.551 Times cited 10 Open Access
Notes Approved Most recent IF: 0.551; 2006 IF: 0.389
Call Number UA @ lucian @ c:irua:60113 Serial 583
Permanent link to this record
 
 
Author Habermeier, H.-U.; Cristiani, G.; Kremer, R.K.; Lebedev, O.; Van Tendeloo, G.
Title Cuprate/manganite superlattices: a model system for a bulk ferromagnetic superconductor Type A1 Journal article
Year 2001 Publication Physica: C : superconductivity Abbreviated Journal Physica C
Volume 364/365 Issue (down) Pages 298-304
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Amsterdam Editor
Language Wos 000172155700069 Publication Date 2002-07-25
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0921-4534; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.404 Times cited 91 Open Access
Notes Approved Most recent IF: 1.404; 2001 IF: 0.806
Call Number UA @ lucian @ c:irua:54794 Serial 591
Permanent link to this record
 
 
Author Suvorov, A.V.; Lebedev, O.I.; Suvorova, A.A.; van Landuyt, J.; Usov, I.O.
Title Defect characterization in high temperature implanted 6H-SiC using TEM Type A1 Journal article
Year 1997 Publication Nuclear instruments and methods in physics research: B Abbreviated Journal Nucl Instrum Meth B
Volume 127/128 Issue (down) Pages 347-349
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos A1997XG60500078 Publication Date 2002-07-25
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0168-583X; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.109 Times cited 17 Open Access
Notes Approved Most recent IF: 1.109; 1997 IF: 1.016
Call Number UA @ lucian @ c:irua:21411 Serial 613
Permanent link to this record
 
 
Author Abakumov, A.; Rozova, M.; Shpanchenko, R.; Kovba, M.; Putilin, S.; Antipov, E.; Lebedev, O.; Van Tendeloo, G.; Kopnin, E.; Karpinski, J.
Title Effects of fluorination on the structure and superconducting properties of Y2Ba4Cu7O14+ phases Type A1 Journal article
Year 1998 Publication Physica: C : superconductivity Abbreviated Journal Physica C
Volume 301 Issue (down) Pages 155-164
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Amsterdam Editor
Language Wos 000074516500005 Publication Date 2002-07-25
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0921-4534; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.404 Times cited 9 Open Access
Notes Approved Most recent IF: 1.404; 1998 IF: 1.086
Call Number UA @ lucian @ c:irua:25663 Serial 862
Permanent link to this record