NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	61–90 of 142 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 >>

List View

Citations

Details

	Records
	Author	Fang, P.a.; Gu, H.; Wang, P.l.; Van Landuyt, J.; Vleugels, J.; Van der Biest, O.;
	Title	Effect of powder coating on stabilizer distribution in CeO₂-stabilized ZrO₂ ceramics			Type	A1 Journal article
	Year	2005	Publication	Journal of the American Ceramic Society	Abbreviated Journal	J Am Ceram Soc
	Volume	88	Issue	7	Pages	1929-1934
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The phase and microstructure relationship of 12 mol% CeO2-stabilized ZrO2 ceramics prepared from coated powder was investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersed Xray spectroscopy (EDS). As compared with the sample prepared with co-precipitated method, which exhibited a similar grain size distribution, the EDS analysis revealed that the powder coating induced a wide distribution of CeO2 solubility, which decreases monotonically with the increase of grain size. This variation of stabilizer content from grain to grain rendered many large grains in the monoclinic phase. Stronger cerium segregation to grain boundaries was observed between large grains, which often form thin amorphous films there. The inhomogeneous; CeO2 distribution keeps more tetragonal ZrO2 grains close to the phase boundary to facilitate the transforming toughness. Addition of an Al2O3 precursor in coated powders effectively raises the overall CeO2 stabilizer content in the grains and preserves more transformable tetragonal phase in the microstructure, which further enhanced the fracture toughness. The dependence of CeO2 solubility on grain size may be explained in a simple coating-controlled diffusion and growth process that deserves further investigation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Columbus, Ohio	Editor
	Language		Wos	000230128100040	Publication Date	2005-06-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0002-7820;1551-2916;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.841	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 2.841; 2005 IF: 1.586
	Call Number	UA @ lucian @ c:irua:103156			Serial	830
Permanent link to this record



	Author	Chen, J.H.; van Dyck, D.; op de Beeck, M.; van Landuyt, J.
	Title	Computational comparisons between the conventional multislice method and the third-order multislice method for calculating high-energy electron diffraction and imaging			Type	A1 Journal article
	Year	1997	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	69	Issue		Pages	219-240
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1997YG59500001	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 2.843; 1997 IF: 1.600
	Call Number	UA @ lucian @ c:irua:21416			Serial	455
Permanent link to this record



	Author	Krause, F.F.; Ahl, J.P.; Tytko, D.; Choi, P.P.; Egoavil, R.; Schowalter, M.; Mehrtens, T.; Müller-Caspary, K.; Verbeeck, J.; Raabe, D.; Hertkorn, J.; Engl, K.; Rosenauer, A.
	Title	Homogeneity and composition of AlInGaN : a multiprobe nanostructure study			Type	A1 Journal article
	Year	2015	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	156	Issue	156	Pages	29-36
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The electronic properties of quaternary AlInGaN devices significantly depend on the homogeneity of the alloy. The identification of compositional fluctuations or verification of random-alloy distribution is hence of grave importance. Here, a comprehensive multiprobe study of composition and compositional homogeneity is presented, investigating AlInGaN layers with indium concentrations ranging from 0 to 17 at% and aluminium concentrations between 0 and 39 at% employing high-angle annular dark field scanning electron microscopy (HAADF STEM), energy dispersive X-ray spectroscopy (EDX) and atom probe tomography (APT). EDX mappings reveal distributions of local concentrations which are in good agreement with random alloy atomic distributions. This was hence investigated with HAADF STEM by comparison with theoretical random alloy expectations using statistical tests. To validate the performance of these tests, HAADF STEM image simulations were carried out for the case of a random-alloy distribution of atoms and for the case of In-rich clusters with nanometer dimensions. The investigated samples, which were grown by metal-organic vapor phase epitaxy (MOVPE), were thereby found to be homogeneous on this nanometer scale. Analysis of reconstructions obtained from APT measurements yielded matching results. Though HAADF STEM only allows for the reduction of possible combinations of indium and aluminium concentrations to the proximity of isolines in the two-dimensional composition space. The observed ranges of composition are in good agreement with the EDX and APT results within the respective precisions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000361001800006	Publication Date	2015-04-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	11	Open Access
	Notes	312483 Esteem2; esteem2_ta			Approved	Most recent IF: 2.843; 2015 IF: 2.436
	Call Number	c:irua:126965 c:irua:126965UA @ admin @ c:irua:126965			Serial	1485
Permanent link to this record



	Author	Molina, L.; Egoavil, R.; Turner, S.; Thersleff, T.; Verbeeck, J.; Holzapfel, B.; Eibl, O.; Van Tendeloo, G.
	Title	Interlayer structure in YBCO-coated conductors prepared by chemical solution deposition			Type	A1 Journal article
	Year	2013	Publication	Superconductor science and technology	Abbreviated Journal	Supercond Sci Tech
	Volume	26	Issue	7	Pages	075016-75018
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The functionality of YBa2Cu3O7−δ (YBCO)-coated conductor technology depends on the reliability and microstructural properties of a given tape or wire architecture. Particularly, the interface to the metal tape is of interest since it determines the adhesion, mechanical stability of the film and thermal contact of the film to the substrate. A trifluoroacetate (TFA)metal organic deposition (MOD) prepared YBCO film deposited on a chemical solution-derived buffer layer architecture based on CeO2/La2Zr2O7 and grown on a flexible Ni5 at.%W substrate with a {100}⟨001⟩ biaxial texture was investigated. The YBCO film had a thickness was 440 nm and a jc of 1.02 MA cm−2 was determined at 77 K and zero external field. We present a sub-nanoscale analysis of a fully processed solution-derived YBCO-coated conductor by aberration-corrected scanning transmission electron microscopy (STEM) combined with electron energy-loss spectroscopy (EELS). For the first time, structural and chemical analysis of the valence has been carried out on the sub-nm scale. Intermixing of Ni, La, Ce, O and Ba takes place at these interfaces and gives rise to nanometer-sized interlayers which are a by-product of the sequential annealing process. Two distinct interfacial regions were analyzed in detail: (i) the YBCO/CeO2/La2Zr2O7 region (10 nm interlayer) and (ii) the La2Zr2O7/Ni5 at.%W substrate interface region (20 nm NiO). This is of particular significance for the functionality of these YBCO-coated conductor architectures grown by chemical solution deposition.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000319973800024	Publication Date	2013-05-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0953-2048;1361-6668;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.878	Times cited	11	Open Access
	Notes	vortex; Countatoms; Fwo; Esteem2; esteem2jra2; esteem2jra3 ECASJO_;			Approved	Most recent IF: 2.878; 2013 IF: 2.796
	Call Number	UA @ lucian @ c:irua:108704UA @ admin @ c:irua:108704			Serial	1698
Permanent link to this record



	Author	Nikolaev, A.V.; Michel, K.H.
	Title	Superexchange and electron correlations in alkali fullerides AC₆₀, A=K, Rb, Cs			Type	A1 Journal article
	Year	2005	Publication	The journal of chemical physics	Abbreviated Journal	J Chem Phys
	Volume	122	Issue	6	Pages	064310-64314
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Superexchange interactions in alkali fullerides AC(60) are derived for C-60 molecular ions separated by interstitial alkali-metal ions. We use a multiconfiguration approach which comprises the lowest molecular orbital states of the C-60 molecule and the excited s and d states of the alkali-metal atom A. Interactions are described by the valence bond (Heitler-London) method for a complex (C-60 – A – C-60) – with two valence electrons. The electronic charge transfer between the alkali-metal atom and a neighboring C-60 molecule is not complete. The occupation probability of excited d and s states of the alkali atom is not negligible. In correspondence with the relative positions of the C-60 molecules and A atoms in the polymer crystal, we consider 180degrees and 90degrees (angle) superexchange pathways. For the former case the ground state is found to be a spin singlet separated from a triplet at similar to20 K. For T < 20 K there appear strong spin correlations for the 180degrees superexchange pathway. The results are related to spin lattice relaxation experiments on CsC60 in the polymerized and in the quenched cubic phase. (C) 2005 American Institute of Physics.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000226918100018	Publication Date	2005-02-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-9606;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.965	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 2.965; 2005 IF: 3.138
	Call Number	UA @ lucian @ c:irua:102740			Serial	3377
Permanent link to this record



	Author	Nikolaev, A.V.; Lamoen, D.; Partoens, B.
	Title	Extension of the basis set of linearized augmented plane wave (LAPW) method by using supplemented tight binding basis functions			Type	A1 Journal article
	Year	2016	Publication	The journal of chemical physics	Abbreviated Journal	J Chem Phys
	Volume	145	Issue	145	Pages	014101
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
	Abstract	In order to increase the accuracy of the linearized augmented plane wave (LAPW) method, we present a new approach where the plane wave basis function is augmented by two different atomic radial components constructed at two different linearization energies corresponding to two different electron bands (or energy windows). We demonstrate that this case can be reduced to the standard treatment within the LAPW paradigm where the usual basis set is enriched by the basis functions of the tight binding type, which go to zero with zero derivative at the sphere boundary. We show that the task is closely related with the problem of extended core states which is currently solved by applying the LAPW method with local orbitals (LAPW+LO). In comparison with LAPW+LO, the number of supplemented basis functions in our approach is doubled, which opens up a new channel for the extension of the LAPW and LAPW+LO basis sets. The appearance of new supplemented basis functions absent in the LAPW+LO treatment is closely related with the existence of the ul-component in the canonical LAPW method. We discuss properties of additional tight binding basis functions and apply the extended basis set for computation of electron energy bands of lanthanum (face and body centered structures) and hexagonal close packed lattice of cadmium. We demonstrate that the new treatment gives lower total energies in comparison with both canonical LAPW and LAPW+LO, with the energy difference more pronounced for intermediate and poor LAPW basis sets.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000379584700003	Publication Date	2016-07-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-9606	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.965	Times cited	11	Open Access
	Notes	A.V.N. acknowledges useful discussions with B. Verberck, E. V. Tkalya, and A. V. Bibikov.			Approved	Most recent IF: 2.965
	Call Number	c:irua:134290			Serial	4099
Permanent link to this record



	Author	Kandemir, A.; Peeters, F.M.; Sahin, H.
	Title	Monitoring the effect of asymmetrical vertical strain on Janus single layers of MoSSe via spectrum			Type	A1 Journal article
	Year	2018	Publication	The journal of chemical physics	Abbreviated Journal	J Chem Phys
	Volume	149	Issue	8	Pages	084707
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Using first principles calculations, we study the structural and phononic properties of the recently synthesized Janus type single layers of molybdenum dichalcogenides. The Janus MoSSe single layer possesses 2H crystal structure with two different chalcogenide sides that lead to out-of-plane anisotropy. By virtue of the asymmetric structure of the ultra-thin Janus type crystal, we induced the out-of-plane anisotropy to show the distinctive vertical pressure effect on the vibrational properties of the Janus material. It is proposed that for the corresponding Raman active optical mode of the Janus structure, the phase modulation and the magnitude ratio of the strained atom and its first neighbor atom adjust the distinctive change in the eigen-frequencies and Raman activity. Moreover, a strong variation in the Raman activity of the Janus structure is obtained under bivertical and univertical strains. Not only eigen-frequency shifts but also Raman activities of the optical modes of the Janus structure exhibit distinguishable features. This study reveals that the vertical anisotropic feature of the Janus structure under Raman measurement allows us to distinguish which side of the Janus crystal interacts with the externals (substrate, functional adlayers, or dopants). Published by AIP Publishing.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000444035800044	Publication Date	2018-08-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-9606	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.965	Times cited	11	Open Access
	Notes	; Computational resources were provided by TUBITAK ULAKBIM, High Performance and Grid Computing Center (TR-Grid e-Infrastructure). H.S. acknowledges financial support from TUBITAK under Project No. 117F095. F.M.P. was supported by the FLAG-ERA-TRANS<INF>2D</INF>TMD. ;			Approved	Most recent IF: 2.965
	Call Number	UA @ lucian @ c:irua:153711UA @ admin @ c:irua:153711			Serial	5115
Permanent link to this record



	Author	Özen, M.; Mertens, M.; Snijkers, F.; Van Tendeloo, G.; Cool, P.
	Title	Texturing of hydrothermally synthesized BaTiO₃ in a strong magnetic field by slip casting			Type	A1 Journal article
	Year	2016	Publication	Ceramics international	Abbreviated Journal	Ceram Int
	Volume	42	Issue	42	Pages	5382-5390
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	Barium titanate powder was processed by slip casting in a rotating strong magnetic field of 9.4 T. The orientation factor of the sintered compact was analyzed by the X-ray diffraction technique and the microstructure (grain-size) was analyzed by scanning electron microscope. The hydrothermally prepared barium titanate was used as matrix material and the molten-salt synthesized barium titanate, with a larger particle-size, was used as template for the templated grain-growth process. Addition of large template particles was observed to increase the orientation factor of the sintered cast (5 vol% loading). Template particles acted as starting grains for the abnormal grain-growth process and the average grain-size was increased after sintering. Increasing the solid loading (15 vol%) resulted in a similar orientation factor with a decrease of the average grain size by more than half. However, addition of templates to the 15 vol% cast had a negative effect on the orientation factor. The impingement of growing particles was stated as the primary cause of particle misorientation resulting in a low orientation factor after sintering. Different heating conditions were tested and it was determined that a slow heating rate gave the highest orientation factor, the smallest average grain-size and the highest relative density. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Barking	Editor
	Language		Wos	000369460500098	Publication Date	2015-12-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0272-8842	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.986	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 2.986
	Call Number	UA @ lucian @ c:irua:132228			Serial	4260
Permanent link to this record



	Author	Weng, Y.; Jia, Z.; Ding, L.; Muraishi, S.; Liu, Q.
	Title	Clustering behavior during natural aging and artificial aging in Al-Mg-Si alloys with different Ag and Cu addition			Type	A1 Journal article
	Year	2018	Publication	Microstructure And Processing	Abbreviated Journal	Mat Sci Eng A-Struct
	Volume	732	Issue	732	Pages	273-283
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The effect of Ag and Cu addition on clustering behavior of Al-Mg-Si alloys during natural aging (NA) and artificial aging (AA) was investigated by hardness measurement, tensile test and atom probe tomography analysis. The results show that both Ag and Cu atoms could enter clusters and GP-zones, change the Mg/Si ratio and increase their volume fractions. Compared with the Al base alloy, the clusters in the Ag/Cu-added alloys more easily transform to beta" phases for size and compositional similarity, and the strengthening ability of these particles is enhanced by the increased volume fraction and shear modulus. In NA condition, Cu is greater in improving the volume fraction of clusters than Ag and thus produces higher T4 temper hardness. In AA condition, in contrary, Ag is more effective in facilitating the formation and growth of particles than Cu due to the stronger Ag-Mg interaction and the high diffusivity of Ag atoms in Al matrix, leading to highest hardening response. Compared to the Cu-added alloy, the Ag-added alloy shows higher precipitation kinetics during AA treatment and maintains a lower T4 temper hardness.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000441486100032	Publication Date	2018-07-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-5093	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.094	Times cited	11	Open Access	OpenAccess
	Notes	; This work was supported by the Special major R & D Projects for Key Technology Innovation of Key Industries in Chongqing (Grant no. cstc2017zdcy-zdzxX0006), the Fundamental Research Funds for the Central Universities of China (Grant no. 106112016CDJXZ338825 and 106112017CDJQJ308822) and the program of China Scholarships Council (No. 201706050125). ;			Approved	Most recent IF: 3.094
	Call Number	UA @ lucian @ c:irua:153107			Serial	5083
Permanent link to this record



	Author	Bogaerts, A.; Gijbels, R.; Goedheer, W.
	Title	Comparison between a radio-frequency and direct current glow discharge in argon by a hybrid Monte Carlo-fluid model for electrons, argon ions and fast argon atoms			Type	A1 Journal article
	Year	1999	Publication	Spectrochimica acta: part B : atomic spectroscopy	Abbreviated Journal	Spectrochim Acta B
	Volume	54	Issue	9	Pages	1335-1350
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000082537900007	Publication Date	2002-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0584-8547;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.241	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.241; 1999 IF: 2.421
	Call Number	UA @ lucian @ c:irua:24924			Serial	424
Permanent link to this record



	Author	Tinck, S.; Bogaerts, A.
	Title	Computer simulations of an oxygen inductively coupled plasma used for plasma-assisted atomic layer deposition			Type	A1 Journal article
	Year	2011	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	20	Issue	1	Pages	015008-015008,10
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, an O2 inductively coupled plasma used for plasma enhanced atomic layer deposition of Al2O3 thin films is investigated by means of modeling. This work intends to provide more information about basic plasma properties such as species densities and species fluxes to the substrate as a function of power and pressure, which might be hard to measure experimentally. For this purpose, a hybrid model developed by Kushner et al is applied to calculate the plasma characteristics in the reactor volume for different chamber pressures ranging from 1 to 10 mTorr and different coil powers ranging from 50 to 500 W. Density profiles of the various oxygen containing plasma species are reported as well as fluxes to the substrate under various operating conditions. Furthermore, different orientations of the substrate, which can be placed vertically or horizontally in the reactor, are taken into account. In addition, special attention is paid to the recombination process of atomic oxygen on the different reactor walls under the stated operating conditions. From this work it can be concluded that the plasma properties change significantly in different locations of the reactor. The plasma density near the cylindrical coil is high, while it is almost negligible in the neighborhood of the substrate. Ion and excited species fluxes to the substrate are found to be very low and negligible. Finally, the orientation of the substrate has a minor effect on the flux of O2, while it has a significant effect on the flux of O. In the horizontal configuration, the flux of atomic oxygen can be up to one order of magnitude lower than in the vertical configuration.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000286592200009	Publication Date	2011-01-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.302; 2011 IF: 2.521
	Call Number	UA @ lucian @ c:irua:85285			Serial	467
Permanent link to this record



	Author	Peerenboom, K.; Parente, A.; Kozák, T.; Bogaerts, A.; Degrez, G.
	Title	Dimension reduction of non-equilibrium plasma kinetic models using principal component analysis			Type	A1 Journal article
	Year	2015	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	24	Issue	24	Pages	025004
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The chemical complexity of non-equilibrium plasmas poses a challenge for plasma modeling because of the computational load. This paper presents a dimension reduction method for such chemically complex plasmas based on principal component analysis (PCA). PCA is used to identify a low-dimensional manifold in chemical state space that is described by a small number of parameters: the principal components. Reduction is obtained since continuity equations only need to be solved for these principal components and not for all the species. Application of the presented method to a CO2 plasma model including state-to-state vibrational kinetics of CO2 and CO demonstrates the potential of the PCA method for dimension reduction. A manifold described by only two principal components is able to predict the CO2 to CO conversion at varying ionization degrees very accurately.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000356816200008	Publication Date	2015-01-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.302; 2015 IF: 3.591
	Call Number	c:irua:123534			Serial	704
Permanent link to this record



	Author	Zhao, S.-X.; Gao, F.; Wang, Y.-N.; Bogaerts, A.
	Title	Gas ratio effects on the Si etch rate and profile uniformity in an inductively coupled Ar/CF₄ plasma			Type	A1 Journal article
	Year	2013	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	22	Issue	1	Pages	015017-15018
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this work, a hybrid model is used to investigate the effect of different gas ratios on the Si etching and polymer film deposition characteristics in an Ar/CF4 inductively coupled plasma. The influence of the surface processes on the bulk plasma properties is studied, and also the spatial characteristics of important gas phase and etched species. The densities of F and CF2 decrease when the surface module is included in the simulations, due to the species consumption caused by etching and polymer deposition. The influence of the surface processes on the bulk plasma depends on the Ar/CF4 gas ratio. The deposited polymer becomes thicker at high CF4 content because of more abundant CFx radicals. As a result of the competition between the polymer thickness and the F flux, the etch rate first increases and then decreases upon increasing the CF4 content. The electron properties, more specifically the electron density profile, affect the Si etch characteristics substantially by determining the radical density and flux profiles. In fact, the radial profile of the etch rate is more uniform at low CF4 content since the electron density has a smooth distribution. At high CF4 content, the etch rate is less uniform with a minimum halfway along the wafer radius, because the electron density distribution is more localized. Therefore, our calculations predict that it is better to work at relatively high Ar/CF4 gas ratios, in order to obtain high etch rate and good profile uniformity for etch applications. This, in fact, corresponds to the typical experimental etch conditions in Ar/CF4 gas mixtures as found in the literature, where Ar is typically present at a much higher concentration than CF4.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000314966300022	Publication Date	2012-12-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.302; 2013 IF: 3.056
	Call Number	UA @ lucian @ c:irua:102583			Serial	1320
Permanent link to this record



	Author	Kastalsky, A.; Peeters, F.M.; Chan, W.K.; Florez, L.T.; Harbison, J.P.
	Title	Nonlinear transport phenomena in a triangular quantum well			Type	A1 Journal article
	Year	1991	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	59	Issue		Pages	1708-1710
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	A1991GH40900019	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951; 1077-3118	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	11	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:945			Serial	2360
Permanent link to this record



	Author	Sun, S.R.; Kolev, S.; Wang, H.X.; Bogaerts, A.
	Title	Investigations of discharge and post-discharge in a gliding arc: a 3D computational study			Type	A1 Journal article
	Year	2017	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	26	Issue	26	Pages	055017
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this study we quantitatively investigate for the first time the plasma characteristics of an argon gliding arc with a 3D model. The model is validated by comparison with available experimental data from literature and a reasonable agreement is obtained for the calculated gas temperature and electron density. A complete arc cycle is modeled from initial ignition to arc decay. We investigate how the plasma characteristics, i.e., the electron temperature, gas temperature, reduced electric field, and the densities of electrons, Ar+ and Ar2+ ions and Ar(4s) excited states, vary over one complete arc cycle, including their behavior in the discharge and post-discharge. These plasma characteristics exhibit a different evolution over one arc cycle, indicating that either the active discharge stage or the post-discharge stage can be beneficial for certain applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000399278100002	Publication Date	2017-04-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1361-6595	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	11	Open Access	OpenAccess
	Notes	This work is financially supported by the Methusalem financing, by the Fund for Scientific Research Flanders (FWO) and by the IAP/7 (Inter-university Attraction Pole) program ‘Physical Chemistry of Plasma-Surface Interactions’ from the Belgian Federal Office for Science Policy (BELSPO). The work was carried out in part using the Turing HPC infrastructure of the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI) and the Universiteit Antwerpen. This work was also supported by the National Natural Science Foundation of China (Grant Nos. 11275021, 11575019). SR Sun thanks the financial support from the China Scholarship Council (CSC).			Approved	Most recent IF: 3.302
	Call Number	PLASMANT @ plasmant @ c:irua:142204			Serial	4550
Permanent link to this record



	Author	Zhang, Y.-R.; Neyts, E.C.; Bogaerts, A.
	Title	Enhancement of plasma generation in catalyst pores with different shapes			Type	A1 Journal article
	Year	2018	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	27	Issue	5	Pages	055008
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Plasma generation inside catalyst pores is of utmost importance for plasma catalysis, as the existence of plasma species inside the pores affects the active surface area of the catalyst available to the plasma species for catalytic reactions. In this paper, the electric field enhancement, and thus the plasma production inside catalyst pores with different pore shapes is studied with a two-dimensional fluid model. The results indicate that the electric field will be significantly enhanced near tip-like structures. In a conical pore with small opening, the strongest electric field appears at the opening and bottom corners of the pore, giving rise to a prominent ionization rate throughout the pore. For a cylindrical pore, the electric field is only enhanced at the bottom corners of the pore, with lower absolute value, and thus the ionization rate inside the pore is only slightly enhanced. Finally, in a conical pore with large opening, the electric field is characterized by a maximum at the bottom of the pore, yielding a similar behavior for the ionization rate. These results demonstrate that the shape of the pore has a significantly influence on the electric field enhancement, and thus modifies the plasma properties.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000432351700002	Publication Date	2018-05-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1361-6595	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	11	Open Access	OpenAccess
	Notes	This work was supported by the Fund for Scientific Research Flanders (FWO) (Grant No. G.0217.14N) and the Fundamental Research Funds for the Central Universities (Grant No. DUT17LK52).			Approved	Most recent IF: 3.302
	Call Number	PLASMANT @ plasmant @c:irua:151546			Serial	4998
Permanent link to this record



	Author	Bogaerts, A.; Gijbels, R.; Goedheer, W.
	Title	Improved hybrid Monte Carlo-fluid model for the electrical characteristics in an analytical radiofrequency glow discharge in argon			Type	A1 Journal article
	Year	2001	Publication	Journal of analytical atomic spectrometry	Abbreviated Journal	J Anal Atom Spectrom
	Volume	16	Issue		Pages	750-755
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000170034200006	Publication Date	2002-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0267-9477;1364-5544;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.379	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.379; 2001 IF: 3.305
	Call Number	UA @ lucian @ c:irua:37249			Serial	1566
Permanent link to this record



	Author	Silva, A.L.M.; Carvalho, M.L.; Janssens, K.; Veloso, J.F.C.A.
	Title	A large area full-field EDXRF imaging system based on a THCOBRA gaseous detector			Type	A1 Journal article
	Year	2015	Publication	Journal of analytical atomic spectrometry	Abbreviated Journal	J Anal Atom Spectrom
	Volume	30	Issue	2	Pages	343-352
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	By taking advantage of the attractive features in terms of gain, position and energy resolution of the 2D-THCOBRA detector, a new large area Full-Field X-ray Fluorescence Imaging (FF-XRFI) system for EDXRF imaging applications was developed. The proposed FF-XRFI system has an active area of 10 x 10 cm(2) and can be used to examine macroscopic samples with a moderately good energy resolution (< 1.6 keV FWHM at 8 keV) and a suitable spatial resolution (similar to 500 mu m FWHM). This combination of characteristics allows us to record elemental distribution maps from the surface of different sample types by combining image and energy information. Two different approaches were used for X-ray optics, one based on a single pinhole and another based on a parallel multiple-hole collimator. To illustrate the system capabilities, some sample examples were imaged and studied.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000349145700003	Publication Date	2014-10-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0267-9477	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.379	Times cited	11	Open Access
	Notes	; The authors thank Stijn Legrand for acquisition of the MAXRF maps shown in Fig. 15. This work was partially supported by projects CERN/FP/123604/2011 FEDER, COMPETE and FCT (Lisbon) programs. A. L. M. Silva is supported by the QREN programme Mais Centro – Programa Operacional Regional do Centro, FEDER and COMPETE, through the project Biomaterials for Regenerative Medicine (CENTRO-07-ST24-FEDER-002030). ;			Approved	Most recent IF: 3.379; 2015 IF: 3.466
	Call Number	UA @ admin @ c:irua:125297			Serial	5452
Permanent link to this record



	Author	Gontard, L.C.; Jinschek, J.R.; Ou, H.; Verbeeck, J.; Dunin-Borkowski, R.E.
	Title	Three-dimensional fabrication and characterisation of core-shell nano-columns using electron beam patterning of Ge-doped SiO₂			Type	A1 Journal article
	Year	2012	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	100	Issue	26	Pages	263113
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A focused electron beam in a scanning transmission electron microscope (STEM) is used to create arrays of core-shell structures in a specimen of amorphous SiO2 doped with Ge. The same electron microscope is then used to measure the changes that occurred in the specimen in three dimensions using electron tomography. The results show that transformations in insulators that have been subjected to intense irradiation using charged particles can be studied directly in three dimensions. The fabricated structures include core-shell nano-columns, sputtered regions, voids, and clusters. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4731765]
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000305831500081	Publication Date	2012-06-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.411; 2012 IF: 3.794
	Call Number	UA @ lucian @ c:irua:100337			Serial	3651
Permanent link to this record



	Author	Milovanović, S.P.; Tadic, M.Z.; Peeters, F.M.
	Title	Graphene membrane as a pressure gauge			Type	A1 Journal article
	Year	2017	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	111	Issue	4	Pages	043101
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Straining graphene results in the appearance of a pseudo-magnetic field which alters its local electronic properties. Applying a pressure difference between the two sides of the membrane causes it to bend/bulge resulting in a resistance change. We find that the resistance changes linearly with pressure for bubbles of small radius while the response becomes non-linear for bubbles that stretch almost to the edges of the sample. This is explained as due to the strong interference of propagating electronic modes inside the bubble. Our calculations show that high gauge factors can be obtained in this way which makes graphene a good candidate for pressure sensing. Published by AIP Publishing.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000406779700035	Publication Date	2017-07-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951; 1077-3118	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	11	Open Access
	Notes	; This work was supported by the Flemish Science Foundation (FWO-Vl), the Methusalem program, the Erasmus+ programme, and the Serbian Ministry of Education, Science and Technological Development. ;			Approved	Most recent IF: 3.411
	Call Number	UA @ lucian @ c:irua:145202			Serial	4718
Permanent link to this record



	Author	Milošević, M.M.; Tadić, M.; Peeters, F.M.
	Title	Effects of lateral asymmetry on electronic structure of strained semiconductor nanorings in a magnetic field			Type	A1 Journal article
	Year	2008	Publication	Nanotechnology	Abbreviated Journal	Nanotechnology
	Volume	19	Issue	45	Pages
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	The influence of lateral asymmetry on the electronic structure and optical transitions in elliptical strained InAs nanorings is analyzed in the presence of a perpendicular magnetic field. Two-dimensional rings are assumed to have elliptical inner and outer boundaries oriented in mutually orthogonal directions. The influence of the eccentricity of the ring on the energy levels is analyzed. For large eccentricity of the ring, we do not find any AharonovBohm effect, in contrast to circular rings. Rather, the single-particle states of the electrons and the holes are localized as in two laterally coupled quantum dots formed in the lobes of the nanoring. Our work indicates that the control of shape is important for the existence of the AharonovBohm effect in semiconductor nanorings.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000259922000016	Publication Date	2008-10-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0957-4484;1361-6528;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.44	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.44; 2008 IF: 3.446
	Call Number	UA @ lucian @ c:irua:76874			Serial	865
Permanent link to this record



	Author	Margueritat, J.; Gonzalo, J.; Afonso, C.N.; Hörmann, U.; Van Tendeloo, G.; Mlayah, A.; Murray, D.B.; Saviot, L.; Zhou, Y.; Hong, M.H.; Luk'yanchuk, B.S.
	Title	Surface enhanced Raman scattering of silver sensitized cobalt nanoparticles in metaldielectric nanocomposites			Type	A1 Journal article
	Year	2008	Publication	Nanotechnology	Abbreviated Journal	Nanotechnology
	Volume	19	Issue	37	Pages	375701,1-375701,4
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We report the preparation of a new type of nanocomposite containing cobalt and silver nanoparticles organized in parallel layers with a well controlled separation. This arrangement allows the observation of an enhanced low-frequency Raman signal at the vibration frequency of cobalt nanoparticles excited through the surface plasmons of silver nanoparticles. Numerical simulations of the electric field confirm the emergence of hot spots when the separation between silver and cobalt nanoparticles is small enough.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000258385600018	Publication Date	2008-08-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0957-4484;1361-6528;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.44	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.44; 2008 IF: 3.446
	Call Number	UA @ lucian @ c:irua:81873			Serial	3396
Permanent link to this record



	Author	Spadaro, M.C.; Luches, P.; Bertoni, G.; Grillo, V.; Turner, S.; Van Tendeloo, G.; Valeri, S.; D'Addato, S.
	Title	Influence of defect distribution on the reducibility of CeO2-x nanoparticles			Type	A1 Journal article
	Year	2016	Publication	Nanotechnology	Abbreviated Journal	Nanotechnology
	Volume	27	Issue	27	Pages	425705
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Ceria nanoparticles (NPs) are fundamental in heterogeneous catalysis because of their ability to store or release oxygen depending on the ambient conditions. Their oxygen storage capacity is strictly related to the exposed planes, crystallinity, density and distribution of defects. In this work a study of ceria NPs produced with a ligand-free, physical synthesis method is presented. The NP films were grown by a magnetron sputtering based gas aggregation source and studied by high resolution- and scanning-transmission electron microscopy and x-ray photoelectron spectroscopy. In particular, the influence of the oxidation procedure on the NP reducibility has been investigated. The different reducibility has been correlated to the exposed planes, crystallinity and density and distribution of structural defects. The results obtained in this work represent a basis to obtain cerium oxide NP with desired oxygen transport properties.
	Address	Dipartimento FIM, Universita di Modena e Reggio Emilia, via G. Campi 213/a, I-41125 Modena, Italy. CNR-NANO, via G. Campi 213/a, I-41125 Modena, Italy
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language	English	Wos	000385483900004	Publication Date	2016-09-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0957-4484	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.44	Times cited	11	Open Access
	Notes	The authors gratefully acknowledge financial support by the Italian MIUR under grant FIRB RBAP115AYN (Oxides at the nanoscale: multifunctionality and applications). The activity is performed within the COST Action CM1104 'Reducible oxide chemistry, structure and functions'. The research leading to these results has received funding also from the European Union Seventh Framework Programme under Grant Agreement 312483—ESTEEM2 (Integrated Infrastructure Initiative–I3).; esteem2_ta			Approved	Most recent IF: 3.44
	Call Number	EMAT @ emat @ c:irua:135424			Serial	4130
Permanent link to this record



	Author	Shi, J.M.; Koenraad, P.M.; van de Stadt, A.F.W.; Peeters, F.M.; Devreese, J.T.; Wolter, J.H.
	Title	Electronic structure of a Si \delta-doped layer in a GaAs/Al_xGa_1-xAs/GaAs quantum barrier			Type	A1 Journal article
	Year	1996	Publication	Physical Review B	Abbreviated Journal	Phys Rev B
	Volume	54	Issue	11	Pages	7996-8004
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Theory of quantum systems and complex systems
	Abstract	We present a theoretical study of the electronic structure of a heavily Si delta-doped layer in a GaAs/AlxGa1-xAs/GaAs quantum barrier. In this class of structures the effect of DX centers on the electronic properties can be tuned by changing the AlxGa1-xAs barrier width and/or the Al concentration, which leads to a lowering of the DX level with respect to the Fermi energy without disturbing the wave functions much. A self-consistent approach is developed in which the effective confinement potential and the Fermi energy of the system, the energies, the wave functions, and the electron densities of the discrete subbands have been obtained as a function of both the material parameters of the samples and the experimental conditions. The effect of DX centers on such structures at nonzero temperature and under an external pressure is investigated for three different models: (1) the DX(nc)(0) model with no correlation effects, (2) the d(+)/DX(0) model, and (3) the d(+)/DX(-) model with inclusion of correlation effects. In the actual calculation, influences of the background accepters, the discontinuity of the effective mass of the electrons at the interfaces of the different materials, band nonparabolicity, and the exchange-correlation energy of the electrons have been taken into account. We have found that (1) introducing a quantum barrier into delta-doped GaAs makes it possible to control the energy gaps between different electronic; subbands; (2) the electron wave functions are mon spread out when the repellent effect of the barriers is increased as compared to those in delta-doped GaAs; (3) increasing the quantum-barrier height and/or the application of hydrostatic pressure are helpful to experimentally observe the effect of the DX centers through a decrease of the total free-electron density; and (4) the correlation effects of the charged impurities are important for the systems under study.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	A1996VL14500066	Publication Date	2002-07-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0163-1829;1095-3795;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.736	Times cited	11	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:104388			Serial	1012
Permanent link to this record



	Author	Degani, M.H.; Farias, G.A.; Peeters, F.M.
	Title	Bound states and lifetime of an electron on a bulk helium surface			Type	A1 Journal article
	Year	2005	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	72	Issue	12	Pages	125408-125408,7
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We propose an effective potential for an excess electron near the helium liquid-vapor interface that takes into account the diffuseness of the liquid-vapor interface and the classical image potential. The splitting of the first two excited states of the excess electron bound to the helium liquid-vapor interface as a function of an external constant electric field applied perpendicular to the interface is in excellent agreement with recent experiments. The effect of a parallel magnetic field on the energy levels are calculated. Single-electron tunneling of the electron out of its surface state is studied as a function of the electric field applied to the system. We found that the tunneling time has a linear dependence on the electric field.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000232229400125	Publication Date	2005-09-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.836; 2005 IF: 3.185
	Call Number	UA @ lucian @ c:irua:94719			Serial	251
Permanent link to this record



	Author	Prodi, A.; Daoud-Aladine, A.; Gozzo, F.; Schmitt, B.; Lebedev, O.; Van Tendeloo, G.; Gilioli, E.; Bolzoni, F.; Aruga-Katori, H.; Takagi, H.; Marezio, M.; Gauzzi, A.;
	Title	Commensurate structural modulation in the charge- and orbitally ordered phase of the quadruple perovskite (NaMn₃)Mn₄O₁₂			Type	A1 Journal article
	Year	2014	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	90	Issue	18	Pages	180101
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	By means of synchrotron x-ray and electron diffraction, we studied the structural changes at the charge order transition T-CO = 176 K in the mixed-valence quadruple perovskite (NaMn3)Mn4O12. Below T-CO we find satellite peaks indicating a commensurate structural modulation with the same propagation vector q = ( 1/2,0,-1/2) of the CE magnetic structure that orders at low temperatures, similarly to the case of simple perovskites such as La0.5Ca0.5MnO3. In the present case, the modulated structure, together with the observation of a large entropy change at T-CO, gives evidence of a rare case of full Mn3+/Mn4+ charge and orbital order, consistent with the Goodenough-Kanamori model.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000344915100001	Publication Date	2014-11-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.836; 2014 IF: 3.736
	Call Number	UA @ lucian @ c:irua:122097			Serial	406
Permanent link to this record



	Author	Vagov, A.; Glaessl, M.; Croitoru, M.D.; Axt, V.M.; Kuhn, T.
	Title	Competition between pure dephasing and photon losses in the dynamics of a dot-cavity system			Type	A1 Journal article
	Year	2014	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	90	Issue	7	Pages	075309
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We demonstrate that in quantum-dot cavity systems, the interplay between acoustic phonons and photon losses introduces novel features and characteristic dependencies in the system dynamics. In particular, the combined action of both dephasing mechanisms strongly affects the transition from the weak-to the strong-coupling regime as well as the shape of the spectral triplet that represents the quantum-dot occupation in Fourier space. The width of the central peak in the triplet is expected to decrease with rising temperature, while the widths and heights of the side peaks depend nonmonotonically on the dot-cavity coupling.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000341258700002	Publication Date	2014-08-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	11	Open Access
	Notes	; We acknowledge fruitful discussions with A. Nazir which helped us to more clearly formulate the relation between our phenomenological approach and the microscopic theory. M.D.C. further acknowledges Alexander von Humboldt and BELSPO grants for support. Financial support from the Deutsche Forschungsgemeinschaft (Grant No. AX 17/7-1) is also gratefully acknowledged. ;			Approved	Most recent IF: 3.836; 2014 IF: 3.736
	Call Number	UA @ lucian @ c:irua:119257			Serial	437
Permanent link to this record



	Author	Baelus, B.J.; Yampolskii, S.V.; Peeters, F.M.
	Title	Coupled mesoscopic superconductors : Ginzburg-Landau theory			Type	A1 Journal article
	Year	2002	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	66	Issue	2	Pages	024517-024517,14
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	The magnetic coupling between two concentric mesoscopic superconductors with nonzero thickness is studied using the nonlinear Ginzburg-Landau theory. We calculated the free energy, the expelled field, the total field profile, the Cooper-pair density, and the current density distribution. By putting a smaller superconducting disk or ring in the center of a larger ring, the properties change drastically. Extra ground-state transitions are found, where the total vorticity stays the same, but the vorticity of the inner superconductor changes by 1. Due to the magnetic coupling, the current in the external ring exhibits extra jumps at the transition fields where the vorticity of the inner superconductor changes. In this case, for certain temperatures, re-entrant behavior and switching on and off of the superconducting behavior of the rings are found as a function of the magnetic field. A H-T phase diagram is obtained for the situation where the inner ring has a higher critical temperature than the outer ring. An analytic expression for the magnetic coupling is obtained for thin rings and extreme type-II superconductors.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000177338400112	Publication Date	2002-10-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0163-1829;1095-3795;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.836; 2002 IF: NA
	Call Number	UA @ lucian @ c:irua:94920			Serial	536
Permanent link to this record



	Author	Nguyen, N.T.T.; Peeters, F.M.
	Title	Cyclotron resonance of a magnetic quantum dot			Type	A1 Journal article
	Year	2008	Publication	Physical review : B : solid state	Abbreviated Journal	Phys Rev B
	Volume	78	Issue	24	Pages	245311,1-245311,10
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	The energy spectrum of a one-electron quantum dot doped with a single magnetic ion is studied in the presence of an external magnetic field. The allowed cyclotron resonance (CR) transitions are obtained together with their oscillator strength as a function of the magnetic field, the position of the magnetic ion, and the quantum dot confinement strength. With increasing magnetic field a ferromagnetic-antiferromagnetic transition is found, which results in clear signatures in the CR absorption. It leads to discontinuities in the transition energies and the oscillator strengths and to an increase in the number of allowed transitions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000262246400055	Publication Date	2008-12-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.836; 2008 IF: 3.322
	Call Number	UA @ lucian @ c:irua:76011			Serial	602
Permanent link to this record



	Author	Lebedev, O.I.; Van Tendeloo, G.; Attfield, J.P.; McLaughlin, A.C.
	Title	Defect structure of ferromagnetic superconducting RuSr₂GdCu₂O₈			Type	A1 Journal article
	Year	2006	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	73	Issue	22	Pages
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The structure and defect structure of superconducting ferromagnetic bulk RuSr2GdCu2O8 has been investigated using high-resolution transmission electron microscopy and high-resolution scanning transmission microscopy. Two distinct, but closely related structures, due to ordering of rotated RuO6 octahedra and due to Cu substitution in the Ru-O layer, have been revealed. The structure of Ru1-xSr2GdCu2+xO8-delta can be described as a periodic alteration along the c axis of CuO4 planes and RuO6 octahedra. The unit-cell parameters of this phase are root 2a(p) x root 2a(p) x 2c. The possible influence of this phase and defect structure on the sensitivity of the superconductivity and magnetic properties is discussed. Local defects such as 90 S domain boundaries, (130) antiphase boundaries, and the associated dislocations are analyzed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000238696300115	Publication Date	2006-06-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	11	Open Access
	Notes	Iap V-I			Approved	Most recent IF: 3.836; 2006 IF: 3.107
	Call Number	UA @ lucian @ c:irua:59707			Serial	619
Permanent link to this record