| Records |
Author  |
Verhulst, A.; Sorée, B.; Leonelli, D.; Vandenberghe, W.G.; Groeseneken, G. |
| Title |
Modeling the single-gate, double-gate, and gate-all-around tunnel field-effect transistor |
Type |
A1 Journal article |
| Year |
2010 |
Publication |
Journal Of Applied Physics |
Abbreviated Journal |
J Appl Phys |
| Volume |
107 |
Issue |
2 |
Pages |
024518,1-024518,8 |
| Keywords |
A1 Journal article; Electron Microscopy for Materials Science (EMAT); |
| Abstract |
Tunnel field-effect transistors (TFETs) are potential successors of metal-oxide-semiconductor FETs because scaling the supply voltage below 1 V is possible due to the absence of a subthreshold-swing limit of 60 mV/decade. The modeling of the TFET performance, however, is still preliminary. We have developed models allowing a direct comparison between the single-gate, double-gate, and gate-all-around configuration at high drain voltage, when the drain-voltage dependence is negligible, and we provide improved insight in the TFET physics. The dependence of the tunnel current on device parameters is analyzed, in particular, the scaling with gate-dielectric thickness, channel thickness, and dielectric constants of gate dielectric and channel material. We show that scaling the gate-dielectric thickness improves the TFET performance more than scaling the channel thickness and that improvements are often overestimated. There is qualitative agreement between our model and our experimental data. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
American Institute of Physics |
Place of Publication |
New York, N.Y. |
Editor |
|
| Language |
|
Wos |
000274180600122 |
Publication Date |
2010-01-28 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0021-8979; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.068 |
Times cited |
150 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 2.068; 2010 IF: 2.079 |
| Call Number |
UA @ lucian @ c:irua:89507 |
Serial |
2146 |
| Permanent link to this record |
| |
|
| |
| Author |
Verleysen, E.; Bender, H.; Richard, O.; Schryvers, D.; Vandervorst, W. |
| Title |
Characterization of nickel silicides using EELS-based methods |
Type |
A1 Journal article |
| Year |
2010 |
Publication |
Journal of microscopy |
Abbreviated Journal |
J Microsc-Oxford |
| Volume |
240 |
Issue |
1 |
Pages |
75-82 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
The characterization of Ni-silicides using electron energy loss spectroscopy (EELS) based methods is discussed. A series of Ni-silicide phases is examined: Ni3Si, Ni31Si12, Ni2Si, NiSi and NiSi2. The composition of these phases is determined by quantitative core-loss EELS. A study of the low loss part of the EELS spectrum shows that both the energy and the shape of the plasmon peak are characteristic for each phase. Examination of the Ni-L edge energy loss near edge structure (ELNES) shows that the ratio and the sum of the L2 and L3 white line intensities are also characteristic for each phase. The sum of the white line intensities is used to determine the trend in electron occupation of the 3d states of the phases. The dependence of the plasmon energy on the electron occupation of the 3d states is demonstrated. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Oxford |
Editor |
|
| Language |
|
Wos |
000281715400009 |
Publication Date |
2010-05-20 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-2720; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.692 |
Times cited |
11 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 1.692; 2010 IF: 1.872 |
| Call Number |
UA @ lucian @ c:irua:84879 |
Serial |
329 |
| Permanent link to this record |
| |
|
| |
| Author |
Verleysen, E.; Bender, H.; Richard, O.; Schryvers, D.; Vandervorst, W. |
| Title |
Compositional characterization of nickel silicides by HAADF-STEM imaging |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Journal of materials science |
Abbreviated Journal |
J Mater Sci |
| Volume |
46 |
Issue |
7 |
Pages |
2001-2008 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
A methodology for the quantitative compositional characterization of nickel silicides by high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) imaging is presented. HAADF-STEM images of a set of nickel silicide reference samples Ni3Si, Ni31Si12, Ni2Si, NiSi and NiSi2 are taken at identical experimental conditions. The correlation between sample thickness and HAADF-STEM intensity is discussed. In order to quantify the relationship between the experimental Z-contrast intensities and the composition of the analysed layers, the ratio of the HAADF-STEM intensity to the sample thickness or to the intensity of the silicon substrate is determined for each nickel silicide reference sample. Diffraction contrast is still detected on the HAADF-STEM images, even though the detector is set at the largest possible detection angle. The influence on the quantification results of intensity fluctuations caused by diffraction contrast and channelling is examined. The methodology is applied to FUSI gate devices and to horizontal TFET devices with different nickel silicides formed on source, gate and drain. It is shown that, if the elements which are present are known, this methodology allows a fast quantitative 2-dimensional compositional analysis. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
London |
Editor |
|
| Language |
|
Wos |
000286633000002 |
Publication Date |
2011-01-06 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-2461;1573-4803; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.599 |
Times cited |
1 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 2.599; 2011 IF: 2.015 |
| Call Number |
UA @ lucian @ c:irua:88950 |
Serial |
446 |
| Permanent link to this record |
| |
|
| |
| Author |
Verlooy, P.; Aerts, A.; Lebedev, O.I.; Van Tendeloo, G.; Kirschhock, C.; Martens, J.A. |
| Title |
Synthesis of highly stable pure-silica thin-walled hexagonally ordered mesoporous material |
Type |
A1 Journal article |
| Year |
2009 |
Publication |
Chemical communications |
Abbreviated Journal |
Chem Commun |
| Volume |
|
Issue |
28 |
Pages |
4287-4289 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Hexagonally ordered mesoporous silica with a very narrow mesopore size distribution and exceptionally high stability paired with unusually thin pore walls was prepared using piperidine and cetyltrimethylammonium bromide. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
London |
Editor |
|
| Language |
|
Wos |
000267808000040 |
Publication Date |
2009-06-09 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1359-7345;1364-548X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
6.319 |
Times cited |
17 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 6.319; 2009 IF: 5.504 |
| Call Number |
UA @ lucian @ c:irua:77684 |
Serial |
3457 |
| Permanent link to this record |
| |
|
| |
| Author |
Verlooy, P.L.H.; Robeyns, K.; van Meervelt, L.; Lebedev, O.I.; Van Tendeloo, G.; Martens, J.A.; Kirschhock, C.E.A. |
| Title |
Synthesis and characterization of the new cyclosilicate hydrate (hexamethyleneimine)4.[Si8O16(OH)4].12H2O |
Type |
A1 Journal article |
| Year |
2010 |
Publication |
Microporous and mesoporous materials: zeolites, clays, carbons and related materials |
Abbreviated Journal |
Micropor Mesopor Mat |
| Volume |
130 |
Issue |
1/3 |
Pages |
14-20 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
A new cyclosilicate hydrate with composition (C6H14N)4·[Si8O16(OH)4]·12H2O was crystallized and the structure determined by single-crystal X-ray diffraction. The structure, described by the tetragonal space group I41/a, with unit cell dimensions of a = 39.2150(2) Å and c = 14.1553(2) Å, contains columns of hydrogen-bonded cubic octamer silicate anions. The space between silicate columns holds hydrogen-bonded water and protonated hexamethyleneimine molecules compensating the negative charge of the silicate. The crystal water can be removed resulting in a rearrangement of the columns into orthorhombic symmetry. Removal of the organic moiety causes amorphisation. Flash evacuation results in a new microporous material with pore volumes typical of a zeolite. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
| Language |
|
Wos |
000275702600003 |
Publication Date |
2009-10-14 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1387-1811; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.615 |
Times cited |
5 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.615; 2010 IF: 3.220 |
| Call Number |
UA @ lucian @ c:irua:82448 |
Serial |
3418 |
| Permanent link to this record |
| |
|
| |
| Author |
Vermang, B.; Brammertz, G.; Meuris, M.; Schnabel, T.; Ahlswede, E.; Choubrac, L.; Harel, S.; Cardinaud, C.; Arzel, L.; Barreau, N.; van Deelen, J.; Bolt, P.-J.; Bras, P.; Ren, Y.; Jaremalm, E.; Khelifi, S.; Yang, S.; Lauwaert, J.; Batuk, M.; Hadermann, J.; Kozina, X.; Handick, E.; Hartmann, C.; Gerlach, D.; Matsuda, A.; Ueda, S.; Chikyow, T.; Felix, R.; Zhang, Y.; Wilks, R.G.; Baer, M. |
| Title |
Wide band gap kesterite absorbers for thin film solar cells: potential and challenges for their deployment in tandem devices |
Type |
A1 Journal article |
| Year |
2019 |
Publication |
Sustainable Energy & Fuels |
Abbreviated Journal |
|
| Volume |
3 |
Issue |
9 |
Pages |
2246-2259 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
This work reports on developments in the field of wide band gap Cu2ZnXY4 (with X = Sn, Si or Ge, and Y = S, Se) kesterite thin film solar cells. An overview on recent developments and the current understanding of wide band gap kesterite absorber layers, alternative buffer layers, and suitable transparent back contacts is presented. Cu2ZnGe(S,Se)(4) absorbers with absorber band gaps up to 1.7 eV have been successfully developed and integrated into solar cells. Combining a CdS buffer layer prepared by an optimized chemical bath deposition process with a 1.36 eV band gap absorber resulted in a record Cu2ZnGeSe4 cell efficiency of 7.6%, while the highest open-circuit voltage of 730 mV could be obtained for a 1.54 eV band gap absorber and a Zn(O,S) buffer layer. Employing InZnOx or TiO2 protective top layers on SnO2:In transparent back contacts yields 85-90% of the solar cell performance of reference cells (with Mo back contact). These advances show the potential as well as the challenges of wide band gap kesterites for future applications in high-efficiency and low-cost tandem photovoltaic devices. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000482057500004 |
Publication Date |
2019-06-14 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
|
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
|
Times cited |
2 |
Open Access |
|
| Notes |
; This project has received funding from the European Union's Horizon 2020 Research and Innovation Program under grant agreement No. 640868. The synchrotron radiation experiments were performed at the SPring-8 beamline BL15XU with the approval of the NIMS Synchrotron X-ray Station (Proposals 2016A4600, 2016B4601, and 2017A4600) and at BESSY II with the approval of HZB. B. Vermang has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement no. 715027). ; |
Approved |
Most recent IF: NA |
| Call Number |
UA @ admin @ c:irua:161785 |
Serial |
5404 |
| Permanent link to this record |
| |
|
| |
| Author |
Vernimmen, J.; Guidotti, M.; Silvestre-Albero, J.; Jardim, E.O.; Mertens, M.; Lebedev, O.I.; Van Tendeloo, G.; Psaro, R.; Rodríguez-Reinoso, F.; Meynen, V.; Cool, P. |
| Title |
Immersion calorimetry as a tool to evaluate the catalytic performance of titanosilicate materials in the epoxidation of cyclohexene |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Langmuir: the ACS journal of surfaces and colloids |
Abbreviated Journal |
Langmuir |
| Volume |
27 |
Issue |
7 |
Pages |
3618-3625 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA) |
| Abstract |
Different types of titanosilicates are synthesized, structurally characterized, and subsequently catalytically tested in the liquid-phase epoxidation of cyclohexene. The performance of three types of combined zeolitic/mesoporous materials is compared with that of widely studied Ti-grafted-MCM-41 molecular sieve and the TS-1 microporous titanosilicate. The catalytic test results are correlated with the structural characteristics of the different catalysts. Moreover, for the first time, immersion calorimetry with the same substrate molecule as in the catalytic test reaction is applied as an extra means to interpret the catalytic results. A good correlation between catalytic performance and immersion calorimetry results is found. This work points out that the combination of catalytic testing and immersion calorimetry can lead to important insights into the influence of the materials structural characteristics on catalysis. Moreover, the potential of using immersion calorimetry as a screening tool for catalysts in epoxidation reactions is shown. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
| Language |
|
Wos |
000288970900054 |
Publication Date |
2011-02-23 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0743-7463;1520-5827; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.833 |
Times cited |
19 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.833; 2011 IF: 4.186 |
| Call Number |
UA @ lucian @ c:irua:88366 |
Serial |
1557 |
| Permanent link to this record |
| |
|
| |
| Author |
Vernimmen, J.; Meynen, V.; Herregods, S.J.F.; Mertens, M.; Lebedev, O.I.; Van Tendeloo, G.; Cool, P. |
| Title |
New insights in the formation of combined zeolitic/mesoporous materials by using a one-pot templating synthesis |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
European journal of inorganic chemistry |
Abbreviated Journal |
Eur J Inorg Chem |
| Volume |
|
Issue |
27 |
Pages |
4234-4240 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA) |
| Abstract |
Zeolitic growth is often absent or occurs in separate phases when synthetic strategies based on the combination of zeolite templates and mesopore templating agents are applied. In this work, zeolitic growth and mesopore formation have been investigated at different temperatures by applying a one-pot templating approach, based on a TS-1 zeolite synthesis whereby part of the microtemplate (tetrapropylammonium hydroxide, TPAOH) is replaced by a mesotemplate (hexadecyltrimethylammonium bromide, CTMABr). Moreover, the synthesis duration and the molar ratio of the microtemplate/mesotemplate have also been studied. The different syntheses clearly show the inherent competitive mechanism between zeolitic growth and mesopore formation. These insights have led to the conclusion that by following a one-pot templating strategy with standard, nonexotic commercial templates, i.e. CTMABr and TPAOH, it is not possible to develop a true hierarchical mesoporous zeolite, meaning a mesoporous siliceous material with highly crystalline zeolitic walls. The resultant materials are instead combined zeolitic/mesoporous composite structures with, however, highly tuneable and controllable porosity characteristics. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
| Language |
|
Wos |
000296143500014 |
Publication Date |
2011-08-17 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1434-1948; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.444 |
Times cited |
7 |
Open Access |
|
| Notes |
Fwo |
Approved |
Most recent IF: 2.444; 2011 IF: 3.049 |
| Call Number |
UA @ lucian @ c:irua:91574 |
Serial |
2315 |
| Permanent link to this record |
| |
|
| |
| Author |
Vernimmen, J.; Meynen, V.; Mertens, M.; Lebedev, O.I.; Van Tendeloo, G.; Cool, P. |
| Title |
Formation of a Ti-siliceous trimodal material with macroholes, mesopores and zeolitic features via a one-pot templating synthesis |
Type |
A1 Journal article |
| Year |
2012 |
Publication |
Journal of porous materials |
Abbreviated Journal |
J Porous Mat |
| Volume |
19 |
Issue |
2 |
Pages |
153-160 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA) |
| Abstract |
Based on a facile one-pot templating synthesis, using a TS-1 zeolite recipe whereby part of the zeolite structure directing agent is replaced by a mesopore templating agent, a trimodal material is formed. The resulting meso-TSM material combines mesoporosity (Ti-MCM-41) with zeolitic features (TS-1) and a unique sheet-like morphology with uniform macroporous voids (macroholes). Moreover, the macrohole formation, mesoporosity and zeolitic properties of the meso-TSM material can be controlled in a straightforward way by adjusting the length of the hydrothermal treatment. This newly developed material may imply great potential for catalytic redox applications and diffusion limitated processes because of its highly tunable character in all three dimensions (micro-, meso- and macroporous scale). |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Kluwer Academic |
Place of Publication |
Boston, Mass. |
Editor |
|
| Language |
|
Wos |
000301187600002 |
Publication Date |
2011-03-28 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1380-2224;1573-4854; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.624 |
Times cited |
2 |
Open Access |
|
| Notes |
Fwo; Goa |
Approved |
Most recent IF: 1.624; 2012 IF: 1.348 |
| Call Number |
UA @ lucian @ c:irua:88367 |
Serial |
1257 |
| Permanent link to this record |
| |
|
| |
| Author |
Vernochet, C.; Vannier, R.-N.; Huvé, M.; Pirovano, C.; Nowogrocki, G.; Mairesse, G.; Van Tendeloo, G. |
| Title |
Chemical, structural and electrical characterizations in the BIZNVOX family |
Type |
A1 Journal article |
| Year |
2000 |
Publication |
Journal of materials chemistry |
Abbreviated Journal |
J Mater Chem |
| Volume |
10 |
Issue |
12 |
Pages |
2811-2817 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Cambridge |
Editor |
|
| Language |
|
Wos |
000165487800037 |
Publication Date |
2002-07-26 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0959-9428;1364-5501; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
|
Times cited |
13 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: NA |
| Call Number |
UA @ lucian @ c:irua:54757 |
Serial |
351 |
| Permanent link to this record |
| |
|
| |
| Author |
Veronesi, S.; Pfusterschmied, G.; Fabbri, F.; Leitgeb, M.; Arif, O.; Esteban, D.A.; Bals, S.; Schmid, U.; Heun, S. |
| Title |
3D arrangement of epitaxial graphene conformally grown on porousified crystalline SiC |
Type |
A1 Journal article |
| Year |
2022 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
| Volume |
189 |
Issue |
|
Pages |
210-218 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000760358800008 |
Publication Date |
2021-12-17 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0008-6223 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
10.9 |
Times cited |
3 |
Open Access |
OpenAccess |
| Notes |
Horizon 2020; European Commission; Horizon 2020 Framework Programme; European Research Council, 128 731 019 ; European Research Council, REALNANO 815 128 ; sygmaSB |
Approved |
Most recent IF: 10.9 |
| Call Number |
EMAT @ emat @c:irua:186583 |
Serial |
6952 |
| Permanent link to this record |
| |
|
| |
| Author |
Vervaet, B.A.; Nast, C.C.; Jayasumana, C.; Schreurs, G.; Roels, F.; Herath, C.; Kojc, N.; Samaee, V.; Rodrigo, S.; Gowrishankar, R. |
| Title |
Chronic interstitial nephritis in agricultural communities : a toxin-induced proximal tubular nephropathy |
Type |
A1 Journal article |
| Year |
2020 |
Publication |
European Medical Journal : Nephrology |
Abbreviated Journal |
|
| Volume |
8 |
Issue |
1 |
Pages |
40-42 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Pathophysiology |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
|
Publication Date |
|
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
2053-4248 |
ISBN |
|
Additional Links |
UA library record |
| Impact Factor |
|
Times cited |
|
Open Access |
|
| Notes |
|
Approved |
Most recent IF: NA |
| Call Number |
UA @ admin @ c:irua:180862 |
Serial |
6858 |
| Permanent link to this record |
| |
|
| |
| Author |
Vervaet, B.A.; Nast, C.C.; Jayasumana, C.; Schreurs, G.; Roels, F.; Herath, C.; Kojc, N.; Samaee, V.; Rodrigo, S.; Gowrishankar, S.; Mousson, C.; Dassanayake, R.; Orantes, C.M.; Vuiblet, V.; Rigothier, C.; d' Haese, P.C.; de Broe, M.E. |
| Title |
Chronic interstitial nephritis in agricultural communities is a toxin induced proximal tubular nephropathy |
Type |
A1 Journal article |
| Year |
2019 |
Publication |
Kidney international |
Abbreviated Journal |
Kidney Int |
| Volume |
97 |
Issue |
97 |
Pages |
350-369 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory Experimental Medicine and Pediatrics (LEMP); Pathophysiology |
| Abstract |
Almost 30 years after the detection of chronic interstitial nephritis in agricultural communities (CINAC) its etiology remains unknown. To help define this we examined 34 renal biopsies from Sri Lanka, El Salvador, India and France of patients with chronic kidney disease 2-3 and diagnosed with CINAC by light and electron microscopy. In addition to known histopathology, we identified a unique constellation of proximal tubular cell findings including large dysmorphic lysosomes with a light-medium electron-dense matrix containing dispersed dark electron-dense non-membrane bound “aggregates”. These aggregates associated with varying degrees of cellular/tubular atrophy, apparent cell fragment shedding and no-weak proximal tubular cell proliferative capacity. Identical lysosomal lesions, identifiable by electron microscopy, were observed in 9% of renal transplant implantation biopsies, but were more prevalent in six month (50%) and 12 month (67%) protocol biopsies and in indication biopsies (76%) of calcineurin inhibitor treated transplant patients. The phenotype was also found associated with nephrotoxic drugs (lomustine, clomiphene, lithium, cocaine) and in some patients with light chain tubulopathy, all conditions that can be directly or indirectly linked to calcineurin pathway inhibition or modulation. One hundred biopsies of normal kidneys, drug/toxin induced nephropathies, and overt proteinuric patients of different etiologies to some extent could demonstrate the light microscopic proximal tubular cell changes, but rarely the electron microscopic lysosomal features. Rats treated with the calcineurin inhibitor cyclosporine for four weeks developed similar proximal tubular cell lysosomal alterations, which were absent in a dehydration group. Overall, the finding of an identical proximal tubular cell (lysosomal) lesion in CINAC and calcineurin inhibitor nephrotoxicity in different geographic regions suggests a common paradigm where CINAC patients undergo a tubulotoxic mechanism similar to calcineurin inhibitor nephrotoxicity. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000508449300020 |
Publication Date |
2019-11-23 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0085-2538; 1523-1755 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
8.395 |
Times cited |
|
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 8.395 |
| Call Number |
UA @ admin @ c:irua:164305c:irua:166544 |
Serial |
5384 |
| Permanent link to this record |
| |
|
| |
| Author |
Viart, N.; Sayed Hassan, R.; Ulhaq-Bouillet, C.; Meny, C.; Panissod, P.; Loison, J.L.; Versini, G.; Huber, F.; Pourroy, G.; Verbeeck, J.; Van Tendeloo, G. |
| Title |
Oxidation processes at the metal/oxide interface in CoFe2/CoFe2O4 bilayers deposited by pulsed laser deposition |
Type |
A1 Journal article |
| Year |
2006 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
| Volume |
54 |
Issue |
1 |
Pages |
191-196 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
CoFe2/CoFe2O4 bilayers were made by pulsed laser ablation of a CoFe2 target on Si(I 0 0) substrates. The metallic layer was deposited first, in vacuum. The oxide was then deposited in an oxidizing O-2:N-2 (20:80) atmosphere. Two different procedures were used for the introduction of the oxidizing atmosphere in the deposition chamber: the laser ablation of the target was either stopped (discontinuous deposition process) or maintained (continuous deposition process) during the 20 min necessary for the establishment of the desired O-2:N-2 pressure. In both cases, the different electronegativities of Fe and Co cause an important modification of the Fe/Co ratio at the metal/oxide interface, with a depletion of Fe in the metal region and of Co in the oxide region. In the continuous procedure, the combination of the kinetic energy given by the ablation process to the Fe and Co adatoms with the one they get from their different affinity towards oxidation allows the formation of a low roughness metal/oxide interface with a high (111) preferred orientation of the CoFe2O4 layer, an induced re-crystallisation of the metal layer underneath and an unusual antiferromagnetic metal/oxide magnetic coupling. (c) 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Oxford |
Editor |
|
| Language |
|
Wos |
000233784500021 |
Publication Date |
2005-10-15 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
5.301 |
Times cited |
5 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 5.301; 2006 IF: 3.549 |
| Call Number |
UA @ lucian @ c:irua:56043UA @ admin @ c:irua:56043 |
Serial |
2540 |
| Permanent link to this record |
| |
|
| |
| Author |
Vidick, D.; Ke, X.; Devillers, M.; Poleunis, C.; Delcorte, A.; Moggi, P.; Van Tendeloo, G.; Hermans, S. |
| Title |
Heterometal nanoparticles from Ru-based molecular clusters covalently anchored onto functionalized carbon nanotubes and nanofibers |
Type |
A1 Journal article |
| Year |
2015 |
Publication |
Beilstein journal of nanotechnology |
Abbreviated Journal |
Beilstein J Nanotech |
| Volume |
6 |
Issue |
6 |
Pages |
1287-1297 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
Heterometal clusters containing Ru and Au, Co and/or Pt are anchored onto carbon nanotubes and nanofibers functionalized with chelating phosphine groups. The cluster anchoring yield is related to the amount of phosphine groups available on the nanocarbon surface. The ligands of the anchored molecular species are then removed by gentle thermal treatment in order to form nanoparticles. In the case of Au-containing clusters, removal of gold atoms from the clusters and agglomeration leads to a bimodal distribution of nanoparticles at the nanocarbon surface. In the case of Ru-Pt species, anchoring occurs without reorganization through a ligand exchange mechanism. After thermal treatment, ultrasmall (1-3 nm) bimetal Ru-Pt nanoparticles are formed on the surface of the nanocarbons. Characterization by high resolution transmission electron microscopy (HRTEM) and high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) confirms their bimetal nature on the nanoscale. The obtained bimetal nanoparticles supported on nanocarbon were tested as catalysts in ammonia synthesis and are shown to be active at low temperature and atmospheric pressure with very low Ru loading. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000355908400001 |
Publication Date |
2015-06-10 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
2190-4286; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.127 |
Times cited |
7 |
Open Access |
|
| Notes |
246791 Countatoms; 262348 Esmi |
Approved |
Most recent IF: 3.127; 2015 IF: 2.670 |
| Call Number |
c:irua:126431 |
Serial |
1420 |
| Permanent link to this record |
| |
|
| |
| Author |
Vijayakumar, J.; Savchenko, T.M.; Bracher, D.M.; Lumbeeck, G.; Béché, A.; Verbeeck, J.; Vajda, Š.; Nolting, F.; Vaz, Ca.f.; Kleibert, A. |
| Title |
Absence of a pressure gap and atomistic mechanism of the oxidation of pure Co nanoparticles |
Type |
A1 Journal article |
| Year |
2023 |
Publication |
Nature communications |
Abbreviated Journal |
Nat Commun |
| Volume |
14 |
Issue |
1 |
Pages |
174 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
Understanding chemical reactivity and magnetism of 3<italic>d</italic>transition metal nanoparticles is of fundamental interest for applications in fields ranging from spintronics to catalysis. Here, we present an atomistic picture of the early stage of the oxidation mechanism and its impact on the magnetism of Co nanoparticles. Our experiments reveal a two-step process characterized by (i) the initial formation of small CoO crystallites across the nanoparticle surface, until their coalescence leads to structural completion of the oxide shell passivating the metallic core; (ii) progressive conversion of the CoO shell to Co<sub>3</sub>O<sub>4</sub>and void formation due to the nanoscale Kirkendall effect. The Co nanoparticles remain highly reactive toward oxygen during phase (i), demonstrating the absence of a pressure gap whereby a low reactivity at low pressures is postulated. Our results provide an important benchmark for the development of theoretical models for the chemical reactivity in catalysis and magnetism during metal oxidation at the nanoscale. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000955726400021 |
Publication Date |
2023-01-12 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
2041-1723 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
16.6 |
Times cited |
1 |
Open Access |
OpenAccess |
| Notes |
Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung, 200021160186 2002153540 ; EC | Horizon 2020 Framework Programme, 810310 823717 ; University of Basel | Swiss Nanoscience Institute, P1502 ; This work is funded by Swiss National Foundation (SNF) (Grants. No 200021160186 and 2002153540) and the Swiss Nanoscience Institut (SNI) (Grant No. SNI P1502). S.V. acknowledges support from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 810310, which corresponds to the J. Heyrovsky Chair project (“ERA Chair at J. Heyrovský Institute of Physical Chemistry AS CR – The institutional approach towards ERA”). The funders had no role in the preparation of the article. Part of this work was performed at the Surface/Interface: Microscopy (SIM) beamline of the Swiss Light Source (SLS), Paul Scherrer Institut, Villigen, Switzerland. We kindly acknowledge Anja Weber and Elisabeth Müller from PSI for their help in fabricating the sample markers. A.B. and J. Verbeeck received funding from the European Union’s Horizon 2020 Research Infrastructure – Integrating Activities for Advanced Communities under grant agreement No. 823717 – ESTEEM3 reported |
Approved |
Most recent IF: 16.6; 2023 IF: 12.124 |
| Call Number |
EMAT @ emat @c:irua:196738 |
Serial |
8804 |
| Permanent link to this record |
| |
|
| |
| Author |
Villani, K.; Kirschhock, C.E.A.; Liang, D.; Van Tendeloo, G.; Martens, J.A. |
| Title |
Catalytic carbon oxidation over ruthenium-based catalysts |
Type |
A1 Journal article |
| Year |
2006 |
Publication |
Angewandte Chemie: international edition in English |
Abbreviated Journal |
Angew Chem Int Edit |
| Volume |
45 |
Issue |
19 |
Pages |
3106-3109 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
| Language |
|
Wos |
000237533400016 |
Publication Date |
2006-03-30 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1433-7851;1521-3773; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
11.994 |
Times cited |
36 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 11.994; 2006 IF: 10.232 |
| Call Number |
UA @ lucian @ c:irua:59449 |
Serial |
291 |
| Permanent link to this record |
| |
|
| |
| Author |
Villani, K.; Vermandel, W.; Smets, K.; Liang, D.; Van Tendeloo, G.; Martens, J.A. |
| Title |
Platinum particle size and support effects in NOx mediated carbon oxidation over platinum catalysts |
Type |
A1 Journal article |
| Year |
2006 |
Publication |
Environmental science & technology |
Abbreviated Journal |
Environ Sci Technol |
| Volume |
40 |
Issue |
8 |
Pages |
2727-2733 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Platinum metal was dispersed on microporous, mesoporous, and nonporous support materials including the zeolites Na-Y, Ba-Y, Ferrierite, ZSM-22, ETS-10, and AlPO-11, alumina, and titania. The oxidation of carbon black loosely mixed with catalyst powder was monitored gravimetrically in a gas stream containing nitric oxide, oxygen, and water. The carbon oxidation activity of the catalysts was found to be uniquely related to the Pt dispersion and little influenced by support type. The optimum dispersion is around 3-4% corresponding to relatively large Pt particle sizes of 2040 nm. The carbon oxidation activity reflects the NO oxidation activity of the platinum catalyst, which reaches an optimum in the 20-40 nm Pt particle size range. The lowest carbon oxidation temperatures were achieved with platinum loaded ZSM-22 and AlPO-11 zeolite crystallites bearing platinum of optimum dispersion on their external surfaces. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Easton, Pa |
Editor |
|
| Language |
|
Wos |
000236992700038 |
Publication Date |
2006-04-13 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0013-936X;1520-5851; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
6.198 |
Times cited |
29 |
Open Access |
|
| Notes |
Comet; Goa |
Approved |
Most recent IF: 6.198; 2006 IF: 4.040 |
| Call Number |
UA @ lucian @ c:irua:103628 |
Serial |
2651 |
| Permanent link to this record |
| |
|
| |
| Author |
Villarreal, R.; Lin, P.-C.; Faraji, F.; Hassani, N.; Bana, H.; Zarkua, Z.; Nair, M.N.; Tsai, H.-C.; Auge, M.; Junge, F.; Hofsaess, H.C.; De Gendt, S.; De Feyter, S.; Brems, S.; Ahlgren, E.H.; Neyts, E.C.; Covaci, L.; Peeters, F.M.; Neek-Amal, M.; Pereira, L.M.C. |
| Title |
Breakdown of universal scaling for nanometer-sized bubbles in graphene |
Type |
A1 Journal article |
| Year |
2021 |
Publication |
Nano Letters |
Abbreviated Journal |
Nano Lett |
| Volume |
21 |
Issue |
19 |
Pages |
8103-8110 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
We report the formation of nanobubbles on graphene with a radius of the order of 1 nm, using ultralow energy implantation of noble gas ions (He, Ne, Ar) into graphene grown on a Pt(111) surface. We show that the universal scaling of the aspect ratio, which has previously been established for larger bubbles, breaks down when the bubble radius approaches 1 nm, resulting in much larger aspect ratios. Moreover, we observe that the bubble stability and aspect ratio depend on the substrate onto which the graphene is grown (bubbles are stable for Pt but not for Cu) and trapped element. We interpret these dependencies in terms of the atomic compressibility of the noble gas as well as of the adhesion energies between graphene, the substrate, and trapped atoms. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000709549100026 |
Publication Date |
2021-09-14 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1530-6984 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
12.712 |
Times cited |
12 |
Open Access |
OpenAccess |
| Notes |
|
Approved |
Most recent IF: 12.712 |
| Call Number |
UA @ admin @ c:irua:184137 |
Serial |
6857 |
| Permanent link to this record |
| |
|
| |
| Author |
Vishwakarma, M.; Agrawal, K.; Hadermann, J.; Mehta, B.R. |
| Title |
Investigating the effect of sulphurization on volatility of compositions in Cu-poor and Sn-rich CZTS thin films |
Type |
A1 Journal article |
| Year |
2020 |
Publication |
Applied Surface Science |
Abbreviated Journal |
Appl Surf Sci |
| Volume |
507 |
Issue |
|
Pages |
145043 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
In the present work, the Cu-poor and Sn-rich CZTS thin films were prepared in order to study the volatility of Sn with respect to other components. Thin film compositions were kept intentionally Sn-rich to understand the behaviour of loss and segregation of Sn during sulphurization. The homogeneous composition distribution in precursor thin films turns heterogeneous with a change in morphology after sulphurization. The inability of identifying nanoscale secondary phases in CZTS thin film by conventional analytical techniques such as XRD and Raman, can be fulfilled by employing HAADF-STEM analysis. XPS and HAADF-STEM analyses provide the quantification of nanoscale secondary phases across the thin film and surface, respectively. The volatility of Sn was revealed in the form of segregation in the middle layer of CZTS cross-sectional lamella rather than loss to annealing atmosphere. It was observed that among the cations of CZTS, Sn segregates more than Cu, while Zn segregates least. The nanoscale spurious phases were observed to vary across different regions in the sulphurized CZTS sample. The reactive annealing lead to grain growth and formation of grain boundary features in the CZTS thin films, where annealing significantly modifies the potential difference and band bending at grain boundaries with respect to intra-grains. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000520021200053 |
Publication Date |
2019-12-13 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0169-4332 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
6.7 |
Times cited |
4 |
Open Access |
OpenAccess |
| Notes |
; Authors acknowledges support provided by DST, India in the forms of InSOL project. We also acknowledge Dr. Indrani Mishra for XPS measurements and DST-FIST Raman facility for Raman measurements. Manoj Vishwakarma acknowledges IIT Delhi, New Delhi, India for MHRD fellowship. Prof. B.R. Mehta acknowledges the support of the Schlumberger chair professorship. ; |
Approved |
Most recent IF: 6.7; 2020 IF: 3.387 |
| Call Number |
UA @ admin @ c:irua:168603 |
Serial |
6552 |
| Permanent link to this record |
| |
|
| |
| Author |
Vishwakarma, M.; Batra, Y.; Hadermann, J.; Singh, A.; Ghosh, A.; Mehta, B.R. |
| Title |
Exploring the role of graphene oxide as a co-catalyst in the CZTS photocathodes for improved photoelectrochemical properties |
Type |
A1 Journal article |
| Year |
2022 |
Publication |
ACS applied energy materials |
Abbreviated Journal |
|
| Volume |
5 |
Issue |
6 |
Pages |
7538-7549 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
The hydrogen evolution properties of CZTS heterostructure photocathodes are reported with graphene oxide (GO) as a co-catalyst layer coated by a drop-cast method and an Al2O3 protection layer fabricated using atomic layer deposition. In the CZTS absorber, a minor deviation from stoichiometry across the cross section of the thin film results in nanoscale growth of spurious phases, but the kesterite phase remains the dominant phase. We have investigated the band alignment parameters such as the band gap, work function, and Fermi level position that are crucial for making kesterite-based heterostructure devices. The photocurrent density in the photocathode CZTS/CdS/ZnO is found to be improved to -4.71 mAmiddotcm(-2) at -0.40 V-RHE, which is 3 times that of the pure CZTS. This enhanced photoresponse can be attributed to faster carrier separation at p-n junction regions driven by upward band bending at CZTS grain boundaries and the ZnO layer. GO as a co-catalyst over the heterostructure photocathode significantly improves the photocurrent density to -6.14 mAmiddotcm(-2) at -0.40 V-RHE by effective charge migration in the CZTS/CdS/ZnO/GO configuration, but the onset potential shifts only after application of the Al2O3 protection layer. Significant photocurrents of -29 mAmiddotcm(-2) at -0.40 V-RHE and -8 mAmiddotcm(-2) at 0 V-RHE are observed, with an onset potential of 0.7 V-RHE in CZTS/CdS/ZnO/GO/Al2O3. The heterostructure configuration and the GO co-catalyst reduce the charge-transfer resistance, while the Al2O3 top layer provides a stable photocurrent for a prolonged time (similar to 16 h). The GO co-catalyst increases the flat band potential from 0.26 to 0.46 V-RHE in CZTS/CdS/ZnO/GO, which supports the bias-induced band bending at the electrolyte-electrode interface. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000820418400001 |
Publication Date |
2022-05-24 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
2574-0962 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
6.4 |
Times cited |
|
Open Access |
Not_Open_Access |
| Notes |
|
Approved |
Most recent IF: 6.4 |
| Call Number |
UA @ admin @ c:irua:189666 |
Serial |
7082 |
| Permanent link to this record |
| |
|
| |
| Author |
Vishwakarma, M.; Karakulina, O.M.; Abakumov, A.M.; Hadermann, J.; Mehta, B.R. |
| Title |
Nanoscale Characterization of Growth of Secondary Phases in Off-Stoichiometric CZTS Thin Films |
Type |
A1 Journal article |
| Year |
2018 |
Publication |
Journal of nanoscience and nanotechnology |
Abbreviated Journal |
J Nanosci Nanotechno |
| Volume |
18 |
Issue |
3 |
Pages |
1688-1695 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
The presence of secondary phases is one of the main issues that hinder the growth of pure kesterite Cu2ZnSnS4 (CZTS) based thin films with suitable electronic and junction properties for efficient solar cell devices. In this work, CZTS thin films with varied Zn and Sn content have been prepared by RF-power controlled co-sputtering deposition using Cu, ZnS and SnS targets and a subsequent sulphurization step. Detailed TEM investigations show that the film shows a layered structure with the majority of the top layer being the kesterite phase. Depending on the initial thin film composition, either about ~1 μm Cu-rich and Zn-poor kesterite or stoichiometric CZTS is formed as top layer. X-ray diffraction, Raman spectroscopy and transmission electron microscopy reveal the presence of Cu2−x S, ZnS and SnO2 minor secondary phases in the form of nanoinclusions or nanoparticles or intermediate layers. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000426033400022 |
Publication Date |
2018-03-01 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1533-4880 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.483 |
Times cited |
|
Open Access |
Not_Open_Access |
| Notes |
Manoj Vishwakarma acknowl- edges IIT Delhi for MHRD fellowship. Professor B. R. Mehta acknowledges the support of the Schlumberger chair professorship. Manoj Vishwakarma, Joke Hadermann and Olesia M. karakulina acknowledge support provided by InsoL-DST. Manoj Vishwakarma acknowledges sup- port provided by CSIR funded projects and the support of DST-FIST Raman facility. References |
Approved |
Most recent IF: 1.483 |
| Call Number |
EMAT @ emat @c:irua:147505 |
Serial |
4775 |
| Permanent link to this record |
| |
|
| |
| Author |
Vishwakarma, M.; Kumar, M.; Hendrickx, M.; Hadermann, J.; Singh, A.P.; Batra, Y.; Mehta, B.R. |
| Title |
Enhancing the hydrogen evolution properties of kesterite absorber by Si-doping in the surface of CZTS thin film |
Type |
A1 Journal article |
| Year |
2021 |
Publication |
Advanced Materials Interfaces |
Abbreviated Journal |
Adv Mater Interfaces |
| Volume |
|
Issue |
|
Pages |
2002124 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
In this work, the effects of Si-doping in Cu2ZnSnS4 are examined computationally and experimentally. The density functional theory calculations show that an increasing concentration of Si (from x = 0 to x = 1) yields a band gap rise due to shifting of the conduction band minimum towards higher energy states in the Cu2Zn(Sn1-xSix)S-4. CZTSiS thin film prepared by co-sputtering process shows Cu2Zn(Sn1-xSix)S-4 (Si-rich) and Cu2ZnSnS4 (S-rich) kesterite phases on the surface and in the bulk of the sample, respectively. A significant change in surface electronic properties is observed in CZTSiS thin film. Si-doping in CZTS inverts the band bending at grain-boundaries from downward to upward and the Fermi level of CZTSiS shifts upward. Further, the coating of the CdS and ZnO layer improves the photocurrent to approximate to 5.57 mA cm(-2) at -0.41 V-RHE in the CZTSiS/CdS/ZnO sample, which is 2.39 times higher than that of pure CZTS. The flat band potential increases from CZTS approximate to 0.43 V-RHE to CZTSiS/CdS/ZnO approximate to 1.31 V-RHE indicating the faster carrier separation process at the electrode-electrolyte interface in the latter sample. CdS/ZnO layers over CZTSiS significantly reduce the charge transfer resistance at the semiconductor-electrolyte interface. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000635804900001 |
Publication Date |
2021-04-02 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
2196-7350 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
4.279 |
Times cited |
|
Open Access |
OpenAccess |
| Notes |
|
Approved |
Most recent IF: 4.279 |
| Call Number |
UA @ admin @ c:irua:177688 |
Serial |
6780 |
| Permanent link to this record |
| |
|
| |
| Author |
Vishwakarma, M.; Thota, N.; Karakulina, O.; Hadermann, J.; Mehta, B.R. |
| Title |
Role of graphene inter layer on the formation of the MoS2 – CZTS interface during growth |
Type |
P1 Proceeding |
| Year |
2018 |
Publication |
(icc-2017) |
Abbreviated Journal |
|
| Volume |
|
Issue |
|
Pages |
|
| Keywords |
P1 Proceeding; Electron microscopy for materials research (EMAT) |
| Abstract |
The growth of MoS2 layer near the Mo/CZTS interface during sulphurization process can have an impact on back contact cell parameters (series resistance and fill factor) depending upon the thickness or quality of MoS2. This study reports the dependence of the thickness of interfacial MoS2 layer on the growth of graphene at the interface between molybdenum back contact and deposited CZTS layer. The graphene layer reduces the accumulation of Zn/ZnS, Sn/SnO2 and formation of pores near the MoS2-CZTS interface. The use of graphene as interface layer can be potentially useful for improving the quality of Mo/MoS2/CZTS interface. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Amer inst physics |
Place of Publication |
Melville |
Editor |
|
| Language |
|
Wos |
000436313003046 |
Publication Date |
2018-05-09 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
1953 |
Series Issue |
|
Edition |
|
| ISSN |
978-0-7354-1648-2; 0094-243x; 0094-243x |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
|
Times cited |
1 |
Open Access |
OpenAccess |
| Notes |
; The authors acknowledge support provided by DST project. M.V. acknowledges IIT Delhi for MHRD fellowship. Prof. B. R. Mehta acknowledges the support of the Schlumberger chair professorship. ; |
Approved |
Most recent IF: NA |
| Call Number |
UA @ lucian @ c:irua:153203 |
Serial |
5126 |
| Permanent link to this record |
| |
|
| |
| Author |
Vishwakarma, M.; Varandani, D.; Hendrickx, M.; Hadermann, J.; Mehta, B.R. |
| Title |
Nanoscale photovoltage mapping in CZTSe/CuxSe heterostructure by using kelvin probe force microscopy |
Type |
A1 Journal article |
| Year |
2020 |
Publication |
Materials Research Express |
Abbreviated Journal |
|
| Volume |
7 |
Issue |
1 |
Pages |
016418 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
In the present work, kelvin probe force microscopy (KPFM) technique has been used to study the CZTSe/CuxSe bilayer interface prepared by multi-step deposition and selenization process of metal precursors. Transmission electron microscopy (TEM) confirmed the bilayer configuration of the CZTSe/CuxSe sample. Two configuration modes (surface mode and junction mode) in KPFM have been employed in order to measure the junction voltage under illumination conditions. The results show that CZTSe/CuxSe has small junction voltage of similar to 21 mV and the presence of CuxSe secondary phase in the CZTSe grain boundaries changes the workfunction of the local grain boundaries region. The negligible photovoltage difference between grain and grain boundaries in photovoltage image indicates that CuxSe phase deteriorates the higher photovoltage at grain boundaries normally observed in CZTSe based device. These results can be important for understanding the role of secondary phases in CZTSe based junction devices. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000520120900001 |
Publication Date |
2019-12-27 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
|
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
|
Times cited |
|
Open Access |
OpenAccess |
| Notes |
; Authors acknowledges support provided DST in the forms of InSOL and Indo-Swiss projects. We also acknowledge Joke Hadermann EMAT, University of Antwerp, Groenenborgerlaan 171, B-2020 Belgium for helping in TEM measurements. M V Manoj Vishwakarma acknowledges IIT Delhi for MHRD fellowship. Prof B R Mehta acknowledges the support of the Schlumberger chair professorship. M V also acknowledges the support of DST-FIST Raman facility. ; |
Approved |
Most recent IF: NA |
| Call Number |
UA @ admin @ c:irua:167843 |
Serial |
6567 |
| Permanent link to this record |
| |
|
| |
| Author |
Vladimirova, N.V.; Frolov, A.S.; Sanchez-Barriga, J.; Clark, O.J.; Matsui, F.; Usachov, D.Y.; Muntwiler, M.; Callaert, C.; Hadermann, J.; Neudachina, V.S.; Tamm, M.E.; Yashina, L.V. |
| Title |
Occupancy of lattice positions probed by X-ray photoelectron diffraction : a case study of tetradymite topological insulators |
Type |
A1 Journal article |
| Year |
2023 |
Publication |
Surfaces and interfaces |
Abbreviated Journal |
|
| Volume |
36 |
Issue |
|
Pages |
102516-10 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Occupancy of different structural positions in a crystal lattice often seems to play a key role in material prop-erties. Several experimental techniques have been developed to uncover this issue, all of them being mostly bulk sensitive. However, many materials including topological insulators (TIs), which are among the most intriguing modern materials, are intended to be used in devices as thin films, for which the sublattice occupancy may differ from the bulk. One of the possible approaches to occupancy analysis is X-ray Photoelectron Diffraction (XPD), a structural method in surface science with chemical sensitivity. We applied this method in a case study of Sb2(Te1-xSex)3 mixed crystals, which belong to prototypical TIs. We used high-angle annular dark field (HAADF) scanning transmission electron microscopy (STEM) as a reference method to verify our analysis. We revealed that the XPD data for vacuum cleaved bulk crystals are in excellent agreement with the reference ones. Also, we demonstrate that the anion occupancy near a naturally formed surface can be rather different from that of the bulk. The present results are relevant for a wide range of compositions where the system remains a topological phase, as we ultimately show by probing the transiently occupied topological surface state above the Fermi level by ultrafast photoemission. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000901694900001 |
Publication Date |
2022-11-28 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
2468-0230 |
ISBN |
|
Additional Links |
UA library record; WoS full record |
| Impact Factor |
6.2 |
Times cited |
|
Open Access |
OpenAccess |
| Notes |
|
Approved |
Most recent IF: 6.2; 2023 IF: NA |
| Call Number |
UA @ admin @ c:irua:193502 |
Serial |
7327 |
| Permanent link to this record |
| |
|
| |
| Author |
Vladimirova, S.A.; Rumyantseva, M.N.; Filatova, D.G.; Chizhov, A.S.; Khmelevsky, N.O.; Konstantinova, E.A.; Kozlovsky, V.F.; Marchevsky, A.V.; Karakulina, O.M.; Hadermann, J.; Gaskov, A.M. |
| Title |
Cobalt location in p -CoO x / n -SnO 2 nanocomposites: Correlation with gas sensor performances |
Type |
A1 Journal Article |
| Year |
2017 |
Publication |
Journal Of Alloys And Compounds |
Abbreviated Journal |
J Alloy Compd |
| Volume |
721 |
Issue |
|
Pages |
249-260 |
| Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| Abstract |
Nanocomposites CoOx/SnO2 based on tin oxide powders with different crystallinity have been prepared by wet chemical synthesis and characterized in detail by ICP-MS, XPS, EPR, XRD, HAADF-STEM imaging and EDX-STEM mapping. It was shown that cobalt is distributed differently between the bulk and surface of SnO2 nanocrystals, which depends on the crystallinity of the SnO2 matrix. The measurements of gas sensor properties have been carried out during exposure to CO (10 ppm), and H2S (2 ppm) in dry air. The decrease of sensor signal toward CO was attributed to high catalytic activity of Co3O4 leading to oxidation of carbon monoxide entirely on the surface of catalyst particles. The formation of a p-CoOx/n-SnO2 heterojunction results in high sensitivity of nanocomposites in H2S detection. The conductance significantly changed in the presence of H2S, which was attributed to the formation of metallic cobalt sulfide and removal of the p – n junction. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000405252400030 |
Publication Date |
2017-06-02 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0925-8388 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.133 |
Times cited |
|
Open Access |
Not_Open_Access |
| Notes |
This work was supported by ERA-Net.Plus grant N 096 FONSENS. EPR experiments were performed using the facilities of the Collective Use Center at the Moscow State University. |
Approved |
Most recent IF: 3.133 |
| Call Number |
EMAT @ emat @ |
Serial |
4711 |
| Permanent link to this record |
| |
|
| |
| Author |
Vladimirova, S.A.; Rumyantseva, M.N.; Filatova, D.G.; Chizhov, A.S.; Khmelevsky, N.O.; Konstantinova, E.A.; Kozlovsky, V.F.; Marchevsky, A.V.; Karakulina, O.M.; Hadermann, J.; Gaskov, A.M. |
| Title |
Cobalt location in p-CoOxIn-SnO2 nanocomposites : correlation with gas sensor performances |
Type |
A1 Journal article |
| Year |
2017 |
Publication |
Journal of alloys and compounds |
Abbreviated Journal |
J Alloy Compd |
| Volume |
721 |
Issue |
|
Pages |
249-260 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
Nanocomposites CoOx/SnO2 based on tin oxide powders with different crystallinity have been prepared by wet chemical synthesis and characterized in detail by ICP-MS, XPS, EPR, XRD, HAADF-STEM imaging and EDX-STEM mapping. It was shown that cobalt is distributed differently between the bulk and surface of SnO2 nanocrystals, which depends on the crystallinity of the SnO2 matrix. The measurements of gas sensor properties have been carried out during exposure to CO (10 ppm), and H2S (2 ppm) in dry air. The decrease of sensor signal toward CO was attributed to high catalytic activity of Co3O4 leading to oxidation of carbon monoxide entirely on the surface of catalyst particles. The formation of a p-CoOx/n-SnO2 heterojunction results in high sensitivity of nanocomposites in H2S detection. The conductance significantly changed in the presence of H2S, which was attributed to the formation of metallic cobalt sulfide and removal of the p – n junction. (C) 2017 Elsevier B.V. All rights reserved. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
| Language |
|
Wos |
|
Publication Date |
|
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0925-8388 |
ISBN |
|
Additional Links |
UA library record; ; WoS full record; WoS citing articles |
| Impact Factor |
3.133 |
Times cited |
|
Open Access |
Not_Open_Access: Available from 10.10.2019
|
| Notes |
; This work was supported by ERA-Net.Plus grant N 096 FON-SENS. EPR experiments were performed using the facilities of the Collective Use Center at the Moscow State University. ; |
Approved |
Most recent IF: 3.133 |
| Call Number |
UA @ lucian @ c:irua:145142 |
Serial |
4714 |
| Permanent link to this record |
| |
|
| |
| Author |
Vlasov, E. |
| Title |
Exploiting secondary electrons in transmission electron microscopy for 3D characterization of nanoparticle morphologies |
Type |
Doctoral thesis |
| Year |
2024 |
Publication |
|
Abbreviated Journal |
|
| Volume |
|
Issue |
|
Pages |
x, 118 p. |
| Keywords |
Doctoral thesis; Electron microscopy for materials research (EMAT) |
| Abstract |
Electron tomography (ET) is an indispensable tool for determining the three-dimensional (3D) structure of nanomaterials in (scanning) transmission electron microscopy ((S)TEM). ET enables 3D characterization of a variety of nanomaterials across different fields, including life sciences, chemistry, solid-state physics, and materials science down to atomic resolution. However, the acquisition of a conventional tilt series for ET is a time-consuming process and thus cannot capture fast transformations of materials in realistic conditions. Moreover, only a limited number of nanoparticles (NPs) can be investigated, hampering a general understanding of the average properties of the material. Therefore, alternative characterization techniques that allow for high-resolution characterization of the surface structure without the need to acquire a full tilt series in ET are required which would enable a more time-efficient investigation with better statistical value. In the first part of this work, an alternative technique for the characterization of the morphology of NPs to improve the throughput and temporal resolution of ET is presented. The proposed technique exploits surface-sensitive secondary electron (SE) imaging in STEM employed using a modification of electron beam-induced current (EBIC) setup. The time- and dose efficiency of SEEBIC are tested in comparison with ET and superior spatial resolution is shown compared to conventional scanning electron microscopy. Finally, contrast artefacts arising in SEEBIC images are described, and their origin is discussed. The second part of my thesis focuses on real applications of the proposed technique and introduces a high-throughput methodology that combines images acquired by SEEBIC with quantitative image analysis to retrieve information about the helicity of gold nanorods. It shows that SEEBIC imaging overcomes the limitation of ET providing a general understanding of the connection between structure and chiroptical properties. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
|
Publication Date |
2024-06-17 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
|
ISBN |
|
Additional Links |
UA library record |
| Impact Factor |
|
Times cited |
|
Open Access |
|
| Notes |
|
Approved |
no |
| Call Number |
UA @ admin @ c:irua:204905 |
Serial |
9149 |
| Permanent link to this record |
| |
|
| |
| Author |
Vlasov, E.; Denisov, N.; Verbeeck, J. |
| Title |
Low-cost electron detector for scanning electron microscope |
Type |
A1 Journal article |
| Year |
2023 |
Publication |
HardwareX |
Abbreviated Journal |
HardwareX |
| Volume |
14 |
Issue |
|
Pages |
e00413 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Electron microscopy is an indispensable tool for the characterization of (nano) materials. Electron microscopes are typically very expensive and their internal operation is often shielded from the user. This situation can provide fast and high quality results for researchers focusing on e.g. materials science if they have access to the relevant instruments. For researchers focusing on technique development, wishing to test novel setups, however, the high entry price can lead to risk aversion and deter researchers from innovating electron microscopy technology further. The closed attitude of commercial entities about how exactly the different parts of electron microscopes work, makes it even harder for newcomers in this field. Here we propose an affordable, easy-to-build electron detector for use in a scanning electron microscope (SEM). The aim of this project is to shed light on the functioning of such detectors as well as show that even a very modest design can lead to acceptable performance while providing high flexibility for experimentation and customization. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
001042486000001 |
Publication Date |
2023-03-10 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
2468-0672 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
|
Times cited |
1 |
Open Access |
OpenAccess |
| Notes |
The authors acknowledge the financial support of the Research Foundation Flanders (FWO, Belgium) project SBO [Grant No. S000121N]. JV acknowledges funding from the HORIZON-INFRA-2022-TECH-01-01 project IMPRESS [Grant No. 101094299]. |
Approved |
Most recent IF: NA |
| Call Number |
EMAT @ emat @c:irua:195886 |
Serial |
7252 |
| Permanent link to this record |
