| Home | << 1 2 3 >> |
|
| Records | |||||
|---|---|---|---|---|---|
Author  |
Zhang, Z.; Rosalie, J.M.; Medhekar, N.V.; Bourgeois, L. | ||||
| Title | Resolving the FCC/HCP interfaces of the \gamma'(Ag2Al) precipitate phase in aluminium | Type | A1 Journal article | ||
| Year | 2019 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 174 | Issue | 174 | Pages | 116-130 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The gamma'(Ag2Al) phase in the Al-Ag alloy system has served as a textbook example for understanding phase transformations, precipitating hexagonal close-packed (HCP) crystals in the face-centred cubic (FCC) aluminium matrix. The gamma' precipitates display fully coherent interfaces at their broad facets and semicoherent interfaces at their edges. Shockley partial dislocations are expected to decorate the semicoherent interface due to the FCC-HCP structural transformation. Determining the exact locations and core structures of interfacial dislocations, however, remains challenging. In this study, we used aberration-corrected scanning transmission electron microscopy and atomistic simulations to re-visit this classical system. We characterised and explained the Ag segregation at coherent interfaces in the early stage of precipitation. For semicoherent interfaces, interfacial dislocations and reconstructions were revealed by bridging advanced microstructure characterisation and atomistic simulations. In particular, we discovered a new FCC/HCP interfacial structure that displays a unique combination of Shockley partial, Lomer-Cottrell and Hirth dislocations that evolve from the known interfacial structure purely composed by Shockley partial dislocations. Our findings show that the FCC-HCP transformation is more complex than hitherto considered, due to the interplay between structure and composition confined at interfaces. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000474501300011 | Publication Date | 2019-05-18 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 3 | Open Access | |
| Notes | ; The authors acknowledge funding from the Australian Research Council (LE0454166, LE110100223), the Victorian State Government and Monash University for instrumentation, and use of the facilities within the Monash Centre for Electron Microscopy. LB and NM acknowledge the financial support of the Australian Research Council (DP150100558). The authors also gratefully acknowledge the computational support from Monash Advanced Research Computing Hybrid, the National Computational Infrastructure and Pawsey Supercomputing Centre. ZZ is thankful to Monash University for a Monash Graduate Scholarship, a Monash International Postgraduate Research Scholarship and a Monash Centre for Electron Microscopy Postgraduate Scholarship. ZZ is indebted to Matthew Weyland for his training in aberration-corrected electron microscopy, Scott Findlay for his help on image simulations, Xiang Gao for alloy casting and Ian Polmear for discussions. ; | Approved | Most recent IF: 5.301 | ||
| Call Number | UA @ admin @ c:irua:161192 | Serial | 5395 | ||
| Permanent link to this record | |||||
| Author |
Zhang, F.; Vanmeensel, K.; Batuk, M.; Hadermann, J.; Inokoshi, M.; Van Meerbeek, B.; Naert, I.; Vleugels, J. | ||||
| Title | Highly-translucent, strong and aging-resistant 3Y-TZP ceramics for dental restoration by grain boundary segregation | Type | A1 Journal article | ||
| Year | 2015 | Publication | Acta biomaterialia | Abbreviated Journal | Acta Biomater |
| Volume | 16 | Issue | 16 | Pages | 215-222 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Latest trends in dental restorative ceramics involve the development of full-contour 3Y-TZP ceramics which can avoid chipping of veneering porcelains. Among the challenges are the low translucency and the hydrothermal stability of 3Y-TZP ceramics. In this work, different trivalent oxides (Al2O3, Sc2O3, Nd2O3 and La2O3) were selected to dope 3Y-TZP ceramics. Results show that dopant segregation was a key factor to design hydrothermally stable and high-translucent 3Y-TZP ceramics and the cation dopant radius could be used as a controlling parameter. A large trivalent dopant, oversized as compared to Zr4+, exhibiting strong segregation at the ZrO2 grain boundary was preferred. The introduction of 0.2 mol% La2O3 in conventional 0.10.25 wt.% Al2O3-doped 3Y-TZP resulted in an excellent combination of high translucency and superior hydrothermal stability, while retaining excellent mechanical properties. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | S.l. | Editor | ||
| Language | Wos | 000351978600021 | Publication Date | 2015-02-04 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1742-7061; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 6.319 | Times cited | 54 | Open Access | |
| Notes | Fwo G043110n | Approved | Most recent IF: 6.319; 2015 IF: 6.025 | ||
| Call Number | c:irua:124421 | Serial | 1473 | ||
| Permanent link to this record | |||||
| Author |
Zhang, F.; Batuk, M.; Hadermann, J.; Manfredi, G.; Mariën, A.; Vanmeensel, K.; Inokoshi, M.; Van Meerbeek, B.; Naert, I.; Vleugels, J. | ||||
| Title | Effect of cation dopant radius on the hydrothermal stability of tetragonal zirconia: Grain boundary segregation and oxygen vacancy annihilation | Type | A1 Journal article | ||
| Year | 2016 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 106 | Issue | 106 | Pages | 48-58 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The hydrothermal aging stability of 3Y-TZP-xM2O3 (M = La, Nd, Sc) was investigated as a function of 0.02–5 mol% M2O3 dopant content and correlated to the overall phase content, t-ZrO2 lattice parameters, grain size distribution, grain boundary chemistry and ionic conductivity. The increased aging stability with increasing Sc2O3 content and the optimum content of 0.4–0.6 mol% Nd2O3 or 0.2–0.4 mol% La2O3, resulting in the highest aging resistance, could be directly related to the constituent phases and the lattice parameters of the remaining tetragonal zirconia. At low M2O3 dopant contents ≤0.4 mol%, the different aging behavior of tetragonal zirconia was attributed to the defect structure of the zirconia grain boundary which was influenced by the dopant cation radius. It was observed that the grain boundary ionic resistivity and the aging resistance followed the same trend: La3+ > Nd3+ > Al3+ > Sc3+, proving that hydrothermal aging is driven by the diffusion of water-derived mobile species through the oxygen vacancies. Accordingly, we elucidated the underlying mechanism by which a larger trivalent cation segregating at the zirconia grain boundary resulted in a higher aging resistance. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000371650300006 | Publication Date | 2016-01-08 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 37 | Open Access | |
| Notes | The authors acknowledge the Research Fund of KU Leuven under project 0T/10/052 and the Fund for Scientific Research Flanders (FWO-Vlaanderen) under grant G.0431.10N. F. Zhang thanks the Research Fund of KU Leuven for her post-doctoral fellowship (PDM/15/153). | Approved | Most recent IF: 5.301 | ||
| Call Number | c:irua:132435 | Serial | 4076 | ||
| Permanent link to this record | |||||
| Author |
Yang, Z.; Tirry, W.; Schryvers, D. | ||||
| Title | Analytical TEM investigations on concentration gradients surrounding Ni4Ti3 precipitates in Ni-Ti shape memory material | Type | A1 Journal article | ||
| Year | 2005 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 52 | Issue | 11 | Pages | 1129-1134 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000228190200010 | Publication Date | 2005-03-16 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | 49 | Open Access | |
| Notes | GOA project; MCRTN-FP6-505226 Multimat | Approved | Most recent IF: 3.747; 2005 IF: 2.228 | ||
| Call Number | UA @ lucian @ c:irua:55687 | Serial | 110 | ||
| Permanent link to this record | |||||
| Author |
Yang, Z.; Tirry, W.; Lamoen, D.; Kulkova, S.; Schryvers, D. | ||||
| Title | Electron energy-loss spectroscopy and first-principles calculation studies on a Ni-Ti shape memory alloy | Type | A1 Journal article | ||
| Year | 2008 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 56 | Issue | 3 | Pages | 395-404 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000253020900011 | Publication Date | 2007-12-01 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 20 | Open Access | |
| Notes | Goa; Ec Rtn; Fwo | Approved | Most recent IF: 5.301; 2008 IF: 3.729 | ||
| Call Number | UA @ lucian @ c:irua:67462 | Serial | 931 | ||
| Permanent link to this record | |||||
| Author |
Yang, T.; Kong, Y.; Du, Y.; Li, K.; Schryvers, D. | ||||
| Title | Discovery of core-shell quasicrystalline particles | Type | A1 Journal article | ||
| Year | 2023 | Publication | Scripta materialia | Abbreviated Journal | |
| Volume | 222 | Issue | Pages | 115040-115046 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Submicron-sized quasicrystalline particles were obtained in an Al-Zn-Mg-Cu alloy produced by traditional melting. These particles consist of an Al-Fe-Ni core and a Mg-Cu-Zn shell and were found to be stable and embedded randomly in the Al matrix. The diffraction patterns of these core-shell particles reveal a decagonal core and an icosahedral shell with, respectively, ten- and five-fold axes aligned. High resolution scanning transmission electron microscopy of the Mg-Cu-Zn shell confirms the five-fold symmetry atomic arrangement and the icosahedral structure. It can therefore be concluded that Fe and Ni impurities play an important role in mediating the formation of such an unusual ternary core-shell quasicrystalline particle. These findings provide some novel insights in the formation of quasicrystals in traditional industrial Al alloys. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000864491400005 | Publication Date | 2022-09-11 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 6 | Times cited | Open Access | OpenAccess | |
| Notes | Approved | Most recent IF: 6; 2023 IF: 3.747 | |||
| Call Number | UA @ admin @ c:irua:191489 | Serial | 7144 | ||
| Permanent link to this record | |||||
| Author |
Yang, M.; Orekhov, A.; Hu, Z.-Y.; Feng, M.; Jin, S.; Sha, G.; Li, K.; Samaee, V.; Song, M.; Du, Y.; Van Tendeloo, G.; Schryvers, D. | ||||
| Title | Shearing and rotation of β'' and β' precipitates in an Al-Mg-Si alloy under tensile deformation : in-situ and ex-situ studies | Type | A1 Journal article | ||
| Year | 2021 | Publication | Acta Materialia | Abbreviated Journal | Acta Mater |
| Volume | 220 | Issue | Pages | 117310 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The interaction between dislocations and nano-precipitates during deformation directly influences hardening response of precipitation-strengthening metals such as Al-Mg-Si alloys. However, how coherent and semi-coherent nano-precipitates accommodate external deformation applied to an Al alloy remains to be elucidated. In-situ tensile experiments in a transmission electron microscope (TEM) were conducted to study the dynamic process of dislocations cutting through coherent needle-like beta '' precipitates with diameters of 3 similar to 8 nm. Comprehensive investigations using in-situ, ex-situ TEM and atom probe tomography uncovered that beta '' precipitates were firstly sheared into small fragments, and then the rotation of the fragments, via sliding along precipitate/matrix interfaces, destroyed their initially coherent interface with the Al matrix. In contrast, semi-coherent beta' precipitates with sizes similar to beta '' were more difficult to be fragmented and accumulation of dislocations at the interface increased interface misfit between beta' and the Al matrix. Consequently, beta' precipitates could basically maintain their needle-like shape after the tensile deformation. This research gains new insights into the interaction between nano-precipitates and dislocations. (C) 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000705535300005 | Publication Date | 2021-09-12 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | Open Access | OpenAccess | |
| Notes | Approved | Most recent IF: 5.301 | |||
| Call Number | UA @ admin @ c:irua:182528 | Serial | 6884 | ||
| Permanent link to this record | |||||
| Author |
Weng, Y.; Ding, L.; Zhang, Z.; Jia, Z.; Wen, B.; Liu, Y.; Muraishi, S.; Li, Y.; Liu, Q. | ||||
| Title | Effect of Ag addition on the precipitation evolution and interfacial segregation for Al-Mg-Si alloy | Type | A1 Journal article | ||
| Year | 2019 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 180 | Issue | 180 | Pages | 301-316 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The effect of Ag addition on the precipitation evolution and interfacial segregation for Al-Mg-Si alloys was systematically investigated by atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), atom probe tomography (APT) and density functional theory (DFT) calculation. At the early aging stage, Ag atoms could enter clusters and refine the distribution of these clusters. Then, Ag atoms preferentially segregate at the GP zone/alpha-Al and beta ''/alpha-Al interfaces at the peak aging stage by the replacement of Al atoms in FCC matrix. With prolonging aging time, Ag atoms generally incorporate into the interior of beta '' precipitate, facilitating the formation of QP lattice (a hexagonal network of Si atomic columns) and the local symmetry substructures, Ag sub-unit (1) and Ag sub-unit (2). At the over-aged stage, the Ag sub-unit (1) and Ag sub-unit (2) could transform to the beta'(Ag) (i.e. beta'(Ag1) and beta'(Ag2).) and Q'(Ag) unit cells, respectively. All the precipitates at the over-aging stage have a composite and disordered structure due to the coexistence of different unit cells (beta'(Ag1), beta'(Ag2), Q'(Ag) and beta') and the non-periodic arrangement of Ag atoms within the precipitate. In the equilibrium stage, the incorporated Ag atoms in the precipitates release into the alpha-Al matrix as solute atoms or form Ag particles. In general, Ag atoms undergo a process of “segregate at the precipitate/matrix interface -> incorporate into the interior of precipitate -> release into the alpha-Al matrix” during the precipitation for Al-Mg-Si-Ag alloys. Besides, Ag segregation is found at the interfaces of almost all metastable phases (including GP zone, beta '', beta'/beta'(Ag) phase) in Al-Mg-Si-Ag alloys. The Ag segregation at the beta'/alpha-Al interface could increase the length/diameter ratio of beta' phase and thus promote the additional strengthening potential of these alloys. These findings provide a new route for precipitation hardening by promoting the nucleation and morphology evolution of precipitates. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000495519100028 | Publication Date | 2019-09-12 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | Open Access | ||
| Notes | Approved | Most recent IF: 5.301 | |||
| Call Number | UA @ admin @ c:irua:164641 | Serial | 6295 | ||
| Permanent link to this record | |||||
| Author |
Wang, X.; Yao, X.; Schryvers, D.; Verlinden, B.; Wang, G.; Zhao, G.; Van Humbeeck, J.; Kustov, S. | ||||
| Title | Anomalous stress-strain behavior of NiTi shape memory alloy close to the border of superelastic window | Type | A1 Journal article | ||
| Year | 2021 | Publication | Scripta Materialia | Abbreviated Journal | Scripta Mater |
| Volume | 204 | Issue | Pages | 114135 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | In this work, we report an anomalous phenomenon on superelastic cycling of NiTi shape memory alloys when deforming at the temperature close to the border of superelastic window. New unexpected effects are found-(i) critical stress for inducing martensite transformation during the second loading cycle is higher than that of the first cycle; ( ii ) the plateau stress of the second cycle decreases to the original level when the strain overcomes the limit of the first cycle; ( iii ) transition from good superelasticity in the first cycle to fully irreversible strain in the second. We propose that defects generated during the first superelastic cycle close to the border of superelastic window impede following stress-induced martensitic transformations, leading to the increase of critical stress beyond yield stress of the B2 matrix, and thus functional fatigue of NiTi alloys. (c) 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000690441400007 | Publication Date | 2021-07-14 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | Open Access | OpenAccess | |
| Notes | Approved | Most recent IF: 3.747 | |||
| Call Number | UA @ admin @ c:irua:181658 | Serial | 6853 | ||
| Permanent link to this record | |||||
| Author |
Wang, X.; Li, K.; Schryvers, D.; Verlinden, B.; Van Humbeeck, J. | ||||
| Title | R-phase transition and related mechanical properties controlled by low-temperature aging treatment in a Ti50.8 at.% Ni thin wire | Type | A1 Journal article | ||
| Year | 2014 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 72-73 | Issue | Pages | 21-24 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | A cold-drawn Ti50.8 at.% Ni wire was annealed at 600 °C for 30 min, followed by aging at 250 °C for different times. A microstructure with small grains and nanoscaled precipitates was obtained. The thermally induced martensite transformation is suppressed in the samples aged for 4 h or longer, leaving a one-stage R-phase transition between −150 and +150 °C. The transformation behavior, work output and recovery stress associated with the R-phase transition are presented. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000329148500006 | Publication Date | 2013-10-17 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | 27 | Open Access | |
| Notes | Fwo | Approved | Most recent IF: 3.747; 2014 IF: 3.224 | ||
| Call Number | UA @ lucian @ c:irua:111847 | Serial | 2806 | ||
| Permanent link to this record | |||||
| Author |
Wang, X.; Kustov, S.; Li, K.; Schryvers, D.; Verlinden, B.; Van Humbeeck, J. | ||||
| Title | Effect of nanoprecipitates on the transformation behavior and functional properties of a Ti50.8 at.% Ni alloy with micron-sized grains | Type | A1 Journal article | ||
| Year | 2015 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 82 | Issue | 82 | Pages | 224-233 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | In order to take advantage of both grain refinement and precipitation hardening effects, nanoscaled Ni4Ti3 precipitates are introduced in a Ti50.8 at.% Ni alloy with micron-sized grains (average grain size of 1.7 μm). Calorimetry, electrical resistance studies and thermomechanical tests were employed to study the transformation behavior and functional properties in relation to the obtained microstructure. A significant suppression of martensite transformation by the obtained microstructure is observed. The thermomechanical tests show that the advantageous properties of both grain refinement and precipitation hardening are combined in the developed materials, resulting in superior shape memory characteristics and stability of pseudoelasticity. It is concluded that introducing nanoscaled Ni4Ti3 precipitates into small grains is a new approach to improve the functional properties of NiTi shape memory alloys. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000347017800021 | Publication Date | 2014-10-04 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 51 | Open Access | |
| Notes | Fwo | Approved | Most recent IF: 5.301; 2015 IF: 4.465 | ||
| Call Number | c:irua:120469 | Serial | 824 | ||
| Permanent link to this record | |||||
| Author |
Wang, B.; Idrissi, H.; Shi, H.; Colla, M.S.; Michotte, S.; Raskin, J.P.; Pardoen, T.; Schryvers, D. | ||||
| Title | Texture-dependent twin formation in nanocrystalline thin Pd films | Type | A1 Journal article | ||
| Year | 2012 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 66 | Issue | 11 | Pages | 866-871 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Nanocrystalline Pd films were produced by electron-beam evaporation and sputter deposition. The electron-beam-evaporated films reveal randomly oriented nanograins with a relatively high density of growth twins, unexpected in view of the high stacking fault energy of Pd. In contrast, sputter-deposited films show a clear 〈1 1 1〉 crystallographic textured nanostructure without twins. These results provide insightful information to guide the generation of microstructures with enhanced strength/ductility balance in high stacking fault energy nanocrystalline metallic thin films. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000303621900007 | Publication Date | 2012-01-31 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | 19 | Open Access | |
| Notes | Iap; Fwo | Approved | Most recent IF: 3.747; 2012 IF: 2.821 | ||
| Call Number | UA @ lucian @ c:irua:96955 | Serial | 3566 | ||
| Permanent link to this record | |||||
| Author |
Viart, N.; Sayed Hassan, R.; Ulhaq-Bouillet, C.; Meny, C.; Panissod, P.; Loison, J.L.; Versini, G.; Huber, F.; Pourroy, G.; Verbeeck, J.; Van Tendeloo, G. | ||||
| Title | Oxidation processes at the metal/oxide interface in CoFe2/CoFe2O4 bilayers deposited by pulsed laser deposition | Type | A1 Journal article | ||
| Year | 2006 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 54 | Issue | 1 | Pages | 191-196 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | CoFe2/CoFe2O4 bilayers were made by pulsed laser ablation of a CoFe2 target on Si(I 0 0) substrates. The metallic layer was deposited first, in vacuum. The oxide was then deposited in an oxidizing O-2:N-2 (20:80) atmosphere. Two different procedures were used for the introduction of the oxidizing atmosphere in the deposition chamber: the laser ablation of the target was either stopped (discontinuous deposition process) or maintained (continuous deposition process) during the 20 min necessary for the establishment of the desired O-2:N-2 pressure. In both cases, the different electronegativities of Fe and Co cause an important modification of the Fe/Co ratio at the metal/oxide interface, with a depletion of Fe in the metal region and of Co in the oxide region. In the continuous procedure, the combination of the kinetic energy given by the ablation process to the Fe and Co adatoms with the one they get from their different affinity towards oxidation allows the formation of a low roughness metal/oxide interface with a high (111) preferred orientation of the CoFe2O4 layer, an induced re-crystallisation of the metal layer underneath and an unusual antiferromagnetic metal/oxide magnetic coupling. (c) 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000233784500021 | Publication Date | 2005-10-15 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 5 | Open Access | |
| Notes | Approved | Most recent IF: 5.301; 2006 IF: 3.549 | |||
| Call Number | UA @ lucian @ c:irua:56043UA @ admin @ c:irua:56043 | Serial | 2540 | ||
| Permanent link to this record | |||||
| Author |
van der Rest, A.; Idrissi, H.; Henry, F.; Favache, A.; Schryvers, D.; Proost, J.; Raskin, J.-P.; Van Overmeere, Q.; Pardoen, T. | ||||
| Title | Mechanical behavior of ultrathin sputter deposited porous amorphous Al2O3 films | Type | A1 Journal article | ||
| Year | 2017 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 125 | Issue | 125 | Pages | 27-37 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The determination of the mechanical properties of porous amorphous Al2O3 thin films is essential to address reliability issues in wear-resistant, optical and electronic coating applications. Testing the mechanical properties of Al2O3 films thinner than 200 nm is challenging, and the link between the mechanical behavior and the microstructure of such films is largely unknown. Herein, we report on the elastic and viscoplastic mechanical properties of amorphous Al2O3 thin films synthesized by reactive magnetron sputtering using a combination of internal stress, nanoindentation, and on-chip uniaxial tensile testing, together with mechanical homogenization models to separate the effect of porosity from intrinsic variations of the response of the sound material. The porosity is made of voids with 2e30 nm diameter. The Young's modulus and hardness of the films decrease by a factor of two when the deposition pressure increases from 1.2 to 8 mTorr. The contribution of porosity was found to be small, and a change in the atomic structure of the amorphous Al2O3 matrix is hypothesized to be the main contributing factor. The activation volume associated to the viscoplastic deformation mechanism is around 100 Å3. Differences in the atomic structure of the films could not be revealed by electron diffraction, pointing to a minute effect of atomic arrangement on the elastic properties. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000394201500003 | Publication Date | 2016-12-02 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 5 | Open Access | OpenAccess |
| Notes | This work has been funded by the Belgian Science Policy through the IAP 7/21 project. The support of the ‘Fonds Belge pour la Recherche dans l’Industrie et l’Agriculture (FRIA)’ for A.v.d.R. is also gratefully acknowledged, as well as the support of FNRS through the grant PDR T.0122.13 “Mecano”. | Approved | Most recent IF: 5.301 | ||
| Call Number | EMAT @ emat @ c:irua:138990 | Serial | 4330 | ||
| Permanent link to this record | |||||
| Author |
Tzedaki, G.; M.; Turner, S.; Godet, S.; De Graeve, I.; Kernig, B.; Hasenclever, J.; Terryn, H. | ||||
| Title | Structure and formation mechanism of rolled-in oxide areas on aluminum lithographic printing sheets | Type | A1 Journal article | ||
| Year | 2013 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 68 | Issue | 5 | Pages | 233-236 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The subsurface area introduced during rolling on the 1100 aluminum alloy series alters its surface properties, which makes it more susceptible to corrosion. A combination of different transmission electron microscopy techniques is employed to observe the orientation of small grain structures and the distribution elements in the subsurface layer. This approach provided valuable insight into the formation mechanism of the layer and the phenomena taking place during rolling. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000314012000003 | Publication Date | 2012-10-23 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | 6 | Open Access | |
| Notes | Fwo | Approved | Most recent IF: 3.747; 2013 IF: 2.968 | ||
| Call Number | UA @ lucian @ c:irua:105288 | Serial | 3277 | ||
| Permanent link to this record | |||||
| Author |
Tirumalasetty, G.K.; van Huis, M.A.; Kwakernaak, C.; Sietsma, J.; Sloof, W.G.; Zandbergen, H.W. | ||||
| Title | Deformation-induced austenite grain rotation and transformation in TRIP-assisted steel | Type | A1 Journal article | ||
| Year | 2012 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 60 | Issue | 3 | Pages | 1311-1321 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Uniaxial straining experiments were performed on a rolled and annealed Si-alloyed TRIP (transformation-induced plasticity) steel sheet in order to assess the role of its microstructure on the mechanical stability of austenite grains with respect to martensitic transformation. The transformation behavior of individual metastable austenite grains was studied both at the surface and inside the bulk of the material using electron back-scattered diffraction (EBSD) and X-ray diffraction (XRD) by deforming the samples to different strain levels up to about 20%. A comparison of the XRD and EBSD results revealed that the retained austenite grains at the surface have a stronger tendency to transform than the austenite grains in the bulk of the material. The deformation-induced changes of individual austenite grains before and after straining were monitored with EBSD. Three different types of austenite grains can be distinguished that have different transformation behaviors: austenite grains at the grain boundaries between ferrite grains, twinned austenite grains, and embedded austenite grains that are completely surrounded by a single ferrite grain. It was found that twinned austenite grains and the austenite grains present at the grain boundaries between larger ferrite grains typically transform first, i.e. are less stable, in contrast to austenite grains that are completely embedded in a larger ferrite grain. In the latter case, straining leads to rotations of the harder austenite grain within the softer ferrite matrix before the austenite transforms into martensite. The analysis suggests that austenite grain rotation behavior is also a significant factor contributing to enhancement of the ductility. (C) 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000301157900054 | Publication Date | 2011-12-19 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 80 | Open Access | |
| Notes | Approved | Most recent IF: 5.301; 2012 IF: 3.941 | |||
| Call Number | UA @ lucian @ c:irua:97210 | Serial | 630 | ||
| Permanent link to this record | |||||
| Author |
Tirumalasetty, G.K.; van Huis, M.A.; Fang, C.M.; Xu, Q.; Tichelaar, F.D.; Hanlon, D.N.; Sietsma, J.; Zandbergen, H.W. | ||||
| Title | Characterization of NbC and (Nb, Ti)N nanoprecipitates in TRIP assisted multiphase steels | Type | A1 Journal article | ||
| Year | 2011 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 59 | Issue | 19 | Pages | 7406-7415 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Multiphase steels utilising composite strengthening may be further strengthened via grain refinement or precipitation by the addition of microalloying elements. In this study a Nb microalloyed steel comprising martensite, bainite and retained austenite has been studied. By means of transmission electron microscopy (TEM) we have investigated the size distribution and the structural properties of (Nb, Ti)N and NbC precipitates, their occurrence in the various steel phases, and their relationship with the Fe matrix. (Nb, Ti)N precipitates were found in ferrite, martensite, and bainite, while NbC precipitates were found only in ferrite. All NbC precipitates were found to be small (520 nm in size) and to have a face centred cubic (fcc) crystal structure with lattice parameter a = 4.36 ± 0.05 Å. In contrast, the (Nb, Ti)N precipitates were found to have a broader size range (5150 nm) and to have a fcc crystal structure with lattice parameter a = 8.09 ± 0.05 Å. While the NbC precipitates were found to be randomly oriented, the (Nb, Ti)N precipitates have a well-defined NishiyamaWasserman orientation relationship with the ferrite matrix. An analysis of the lattice mismatch suggests that the latter precipitates have a high potential for effective strengthening. Density functional theory calculations were performed for various stoichiometries of NbCx and NbxTiyNz phases and the comparison with experimental data indicates that both the carbides and nitrides are deficient in C and N content. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000296405200026 | Publication Date | 2011-09-29 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 58 | Open Access | |
| Notes | Approved | Most recent IF: 5.301; 2011 IF: 3.755 | |||
| Call Number | UA @ lucian @ c:irua:93297 | Serial | 328 | ||
| Permanent link to this record | |||||
| Author |
Tirry, W.; Schryvers, D. | ||||
| Title | Quantitative determination of strain fields around Ni4Ti3 precipitates in NiTi | Type | A1 Journal article | ||
| Year | 2005 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 53 | Issue | 4 | Pages | 1041-1049 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000226774500014 | Publication Date | 2004-12-14 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 97 | Open Access | |
| Notes | Approved | Most recent IF: 5.301; 2005 IF: 3.430 | |||
| Call Number | UA @ lucian @ c:irua:55686 | Serial | 2750 | ||
| Permanent link to this record | |||||
| Author |
Tian, H.; Schryvers, D.; Liu, D.; Jiang, Q.; van Humbeeck, J. | ||||
| Title | Stability of Ni in nitinol oxide surfaces | Type | A1 Journal article | ||
| Year | 2011 | Publication | Acta biomaterialia | Abbreviated Journal | Acta Biomater |
| Volume | 7 | Issue | 2 | Pages | 892-899 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The stability of Ni in titanium oxide surface layers on nitinol wires known to release certain amounts of Ni was investigated by first principles density functional theory and transmission electron microscopy. The oxides were identified as a combination of TiO and TiO2 depending on the thickness of the layer. The calculations indicate that free Ni atoms can exist in TiO at ambient temperature while Ni particles form in TiO2, which was confirmed by the transmission electron microscopy observations. The results are discussed with respect to surface stability and Ni release due to free Ni atoms and Ni particles. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | S.l. | Editor | ||
| Language | Wos | 000286707700047 | Publication Date | 2010-09-17 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1742-7061; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 6.319 | Times cited | 39 | Open Access | |
| Notes | Fwo | Approved | Most recent IF: 6.319; 2011 IF: 4.865 | ||
| Call Number | UA @ lucian @ c:irua:85998 | Serial | 3128 | ||
| Permanent link to this record | |||||
| Author |
Shi, H.; Pourbabak, S.; Van Humbeeck, J.; Schryvers, D. | ||||
| Title | Electron microscopy study of Nb-rich nanoprecipitates in NiTiNb and their influence on the martensitic transformation | Type | A1 Journal article | ||
| Year | 2012 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 67 | Issue | 12 | Pages | 939-942 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Nb-rich nanoprecipitates in the matrix of an annealed commercial NiTiNb alloy are investigated by scanning and transmission electron microscopy, including slice-and-view and chemical analysis. The precipitates have a diameter of around 100 nm, are faceted and have a cube-on-cube relation with the B2 matrix. In situ TEM cooling shows that the martensitic transformation is hampered by the presence of these precipitates. The latter could explain the increase in hysteresis when compared with the binary system. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000311135000005 | Publication Date | 2012-08-27 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | 29 | Open Access | |
| Notes | Fwo | Approved | Most recent IF: 3.747; 2012 IF: 2.821 | ||
| Call Number | UA @ lucian @ c:irua:101486 | Serial | 971 | ||
| Permanent link to this record | |||||
| Author |
Shi, H.; Frenzel, J.; Martinez, G.T.; Van Rompaey, S.; Bakulin, A.; Kulkova, A.; Van Aert, S.; Schryvers, D. | ||||
| Title | Site occupation of Nb atoms in ternary Ni-Ti-Nb shape memory alloys | Type | A1 Journal article | ||
| Year | 2014 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 74 | Issue | Pages | 85-95 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Nb occupancy in the austenite B2-NiTi matrix and Ti2Ni phase in NiTiNb shape memory alloys was investigated by aberration-corrected scanning transmission electron microscopy and precession electron diffraction. In both cases, Nb atoms were found to prefer to occupy the Ti rather than Ni sites. A projector augmented wave method within density functional theory was used to calculate the atomic and electronic structures of the austenitic B2-NiTi matrix phase and the Ti2Ni precipitates both with and without addition of Nb. The obtained formation energies and analysis of structural and electronic characteristics explain the preference for Ti sites for Nb over Ni sites. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000338621400009 | Publication Date | 2014-05-08 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 21 | Open Access | |
| Notes | Approved | Most recent IF: 5.301; 2014 IF: 4.465 | |||
| Call Number | UA @ lucian @ c:irua:118334 | Serial | 3028 | ||
| Permanent link to this record | |||||
| Author |
Seo, J.W.; Schryvers, D. | ||||
| Title | TEM investigation of the microstructure and defects of CuZr martensite: 1: morphology and twin systems | Type | A1 Journal article | ||
| Year | 1998 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 46 | Issue | Pages | 1165-1175 | |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000072289100009 | Publication Date | 2002-07-25 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 46 | Open Access | |
| Notes | Approved | Most recent IF: 5.301; 1998 IF: 1.834 | |||
| Call Number | UA @ lucian @ c:irua:48360 | Serial | 3479 | ||
| Permanent link to this record | |||||
| Author |
Seo, J.W.; Schryvers, D. | ||||
| Title | TEM investigation of the microstructure and defects of CuZr martensite: 2: planar defects | Type | A1 Journal article | ||
| Year | 1998 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 46 | Issue | Pages | 1177-1183 | |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000072289100010 | Publication Date | 2002-07-25 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 21 | Open Access | |
| Notes | Approved | Most recent IF: 5.301; 1998 IF: 1.834 | |||
| Call Number | UA @ lucian @ c:irua:48361 | Serial | 3480 | ||
| Permanent link to this record | |||||
| Author |
Schryvers, D.; Ma, Y.; Toth, L.; Tanner, L.E. | ||||
| Title | Electron microscopy study of the formation of Ni5Al3 in a Ni62.5Al37.5 B2 alloy: 1: precipitation and growth | Type | A1 Journal article | ||
| Year | 1995 | Publication | Acta metallurgica et materialia | Abbreviated Journal | |
| Volume | 43 | Issue | 11 | Pages | 4045-4056 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | New York | Editor | ||
| Language | Wos | A1995TA33200014 | Publication Date | 2003-12-05 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0956-7151; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | 27 | Open Access | ||
| Notes | Approved | no | |||
| Call Number | UA @ lucian @ c:irua:13164 | Serial | 973 | ||
| Permanent link to this record | |||||
| Author |
Schryvers, D.; Ma, Y.; Toth, L.; Tanner, L.E. | ||||
| Title | Electron microscopy study of the formation of Ni5Al3 in a Ni62.5Al37.5 B2 alloy: 2: plate crystallography | Type | A1 Journal article | ||
| Year | 1995 | Publication | Acta metallurgica et materialia | Abbreviated Journal | |
| Volume | 43 | Issue | 11 | Pages | 4057-4065 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | New York | Editor | ||
| Language | Wos | A1995TA33200015 | Publication Date | 2003-12-05 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0956-7151; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | 11 | Open Access | ||
| Notes | Approved | no | |||
| Call Number | UA @ lucian @ c:irua:13165 | Serial | 974 | ||
| Permanent link to this record | |||||
| Author |
Schryvers, D.; Lahjouji, D.E.; Slootmaekers, B.; Potapov, P.L. | ||||
| Title | HREM investigation of martensite precursor effects and stacking sequences in Ni-Mn-Ti alloys | Type | A1 Journal article | ||
| Year | 1996 | Publication | Scripta metallurgica et materialia | Abbreviated Journal | Scripta Mater |
| Volume | 35 | Issue | Pages | 1235-1241 | |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | New York | Editor | ||
| Language | Wos | A1996VL92800019 | Publication Date | 2002-07-26 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.224 | Times cited | 2 | Open Access | |
| Notes | Approved | no | |||
| Call Number | UA @ lucian @ c:irua:15427 | Serial | 1506 | ||
| Permanent link to this record | |||||
| Author |
Schryvers, D.; Firstov, G.S.; Seo, J.W.; van Humbeeck, J.; Koval, Y.N. | ||||
| Title | Unit cell determination in CuZr martensite by EM and X-ray diffraction | Type | A1 Journal article | ||
| Year | 1997 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 36 | Issue | Pages | 1119-1125 | |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | A1997WV99600007 | Publication Date | 0000-00-00 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | 76 | Open Access | |
| Notes | Approved | Most recent IF: 3.747; 1997 IF: 0.645 | |||
| Call Number | UA @ lucian @ c:irua:21344 | Serial | 3811 | ||
| Permanent link to this record | |||||
| Author |
Santamarta, R.; Schryvers, D. | ||||
| Title | Effect of amorphous-crystalline interfaces on the martensitic transformation in Ti50Ni25Cu25 | Type | A1 Journal article | ||
| Year | 2004 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 50 | Issue | Pages | 1423-1427 | |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000221009500002 | Publication Date | 2004-04-13 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | 29 | Open Access | |
| Notes | Approved | Most recent IF: 3.747; 2004 IF: 2.112 | |||
| Call Number | UA @ lucian @ c:irua:48379 | Serial | 795 | ||
| Permanent link to this record | |||||
| Author |
Rotaru, G.-M.; Tirry, W.; Sittner, P.; van Humbeeck, J.; Schryvers, D. | ||||
| Title | Microstructural study of equiatomic PtTi martensite and the discovery of a new long-period structure | Type | A1 Journal article | ||
| Year | 2007 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
| Volume | 55 | Issue | 13 | Pages | 4447-4454 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000248436400021 | Publication Date | 2007-06-04 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.301 | Times cited | 7 | Open Access | |
| Notes | Fwo G.0465.05; Multimat | Approved | Most recent IF: 5.301; 2007 IF: 3.624 | ||
| Call Number | UA @ lucian @ c:irua:65849 | Serial | 2047 | ||
| Permanent link to this record | |||||
| Author |
Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J. | ||||
| Title | On the stress state dependence of the twinning rate and work hardening in twinning-induced plasticity steels | Type | A1 Journal article | ||
| Year | 2012 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 66 | Issue | 12 | Pages | 966-971 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The influence of the stress state on the twinning rate and work hardening is studied in the case of an FeMnC TWIP steel strained in uniaxial tension, simple shear and rolling. The resulting stressstrain responses exhibit marked differences. The twinning rate, number of activated twinning systems in each grain, twin thickness and transmission of twins across grain boundaries are dependent on the imposed stress state during straining. Relationships between twin features and macroscopic work hardening rate are established. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000304641500004 | Publication Date | 2012-02-10 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | 41 | Open Access | |
| Notes | Iap | Approved | Most recent IF: 3.747; 2012 IF: 2.821 | ||
| Call Number | UA @ lucian @ c:irua:98374 | Serial | 2454 | ||
| Permanent link to this record | |||||