NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	1–18 of 18 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 >>

List View

Citations

Details

	Records
	Author	Krishnamurthy, S.C.; Arseenko, M.; Kashiwar, A.; Dufour, P.; Marchal, Y.; Delahaye, J.; Idrissi, H.; Pardoen, T.; Mertens, A.; Simar, A.
	Title	Controlled precipitation in a new Al-Mg-Sc alloy for enhanced corrosion behavior while maintaining the mechanical performance			Type	A1 Journal article
	Year	2023	Publication	Materials characterization	Abbreviated Journal
	Volume	200	Issue		Pages	112886-11
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The hot working of 5xxx series alloys with Mg ≥3.5 wt% is a concern due to the precipitation of β (Al3Mg2) phase at grain boundaries favoring Inter Granular Corrosion (IGC). The mechanical and corrosion properties of a new 5028-H116 Al-Mg-Sc alloy under various β precipitates distribution is analyzed by imposing different cooling rates from the hot forming temperature (i.e. 325 °C). The mechanical properties are maintained regardless of the heat treatment. However, the different nucleation sites and volume fractions of β precipitates for different cooling rates critically affect IGC. Controlled furnace cooling after the 325 °C heat treatment is ideal in 5028-H116 alloy to reduce susceptibility to IGC after sensitization.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000977059100001	Publication Date	2023-04-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.7	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 4.7; 2023 IF: 2.714
	Call Number	UA @ admin @ c:irua:195598			Serial	7291
Permanent link to this record



	Author	Yang, T.; Kong, Y.; Li, K.; Lu, Q.; Wang, Y.; Du, Y.; Schryvers, D.
	Title	Quasicrystalline clusters transformed from C14-MgZn₂ nanoprecipitates in Al alloys			Type	A1 Journal article
	Year	2023	Publication	Materials characterization	Abbreviated Journal
	Volume	199	Issue		Pages	112772-112777
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Ultrafine faulty C14-MgZn2 Laves phase precipitates containing quasicrystalline clusters and demonstrating the formation of binary quasicrystalline precipitates with Penrose-like random-tiling were observed in the over-aged FCC matrix of a commercial 7N01 Al-Zn-Mg alloy, using high angle annular dark field scanning transmission electron microscopy. The evolution from C14-Laves phase to quasicrystalline clusters is illustrated, and five-fold symmetry can be found in both real and reciprocal spaces. Our findings reveal the possibility of quasicrystalline formation from Laves phase in a highly plastic metal matrix like Al and demonstrate the structural relationship between Laves phase and quasicrystals.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000954788800001	Publication Date	2023-03-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.7	Times cited		Open Access	Not_Open_Access
	Notes				Approved	Most recent IF: 4.7; 2023 IF: 2.714
	Call Number	UA @ admin @ c:irua:196106			Serial	8446
Permanent link to this record



	Author	Charalampopoulou, E.; Lambrinou, K.; Van der Donck, T.; Paladino, B.; Di Fonzo, F.; Azina, C.; Eklund, P.; Mraz, S.; Schneider, J.M.; Schryvers, D.; Delville, R.
	Title	Early stages of dissolution corrosion in 316L and DIN 1.4970 austenitic stainless steels with and without anticorrosion coatings in static liquid lead-bismuth eutectic (LBE) at 500 degrees C			Type	A1 Journal article
	Year	2021	Publication	Materials Characterization	Abbreviated Journal	Mater Charact
	Volume	178	Issue		Pages	111234
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	This work addresses the early stages (<= 1000 h) of the dissolution corrosion behavior of 316L and DIN 1.4970 austenitic stainless steels in contact with oxygen-poor (C-O < 10(-8) mass%), static liquid lead-bismuth eutectic (LBE) at 500 degrees C for 600-1000 h. The objective of this study was to determine the relative early-stage resistance of the uncoated steels to dissolution corrosion and to assess the protectiveness of select candidate coatings (Cr2AlC, Al2O3, V2AlxCy). The simultaneous exposure of steels with intended differences in microstructure and thermomechanical state showed the effects of steel grain size, density of annealing/deformation twins, and secondary precipitates on the steel dissolution corrosion behavior. The findings of this study provide recommendations on steel manufacturing with the aim of using the steels to construct Gen-IV lead-cooled fast reactors.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000752582700001	Publication Date	2021-06-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 2.714
	Call Number	UA @ admin @ c:irua:186509			Serial	7061
Permanent link to this record



	Author	Cao, S.; Zeng, C.Y.; Li, Y.Y.; Yao, X.; Ma, X.; Samaee, V.; Schryvers, D.; Zhang, X.P.
	Title	Quantitative FIB/SEM three-dimensional characterization of a unique Ni₄Ti₃ network in a porous Ni50.8Ti49.2 alloy undergoing a two-step martensitic transformation			Type	A1 Journal article
	Year	2020	Publication	Materials Characterization	Abbreviated Journal	Mater Charact
	Volume	169	Issue		Pages	110595
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The three-dimensional (3D) nanostructure of Ni4Ti3 precipitates in a porous Ni50.8Ti49.2 alloy has been re-constructed by “Slice-and-View” in a Focused Ion Beam/Scanning Electron Microscope (FIB/SEM). The 3D configuration of these precipitates forming a network structure in the B2 austenite matrix has been characterized via 3D visualization and quantitative analysis including volume fraction, skeleton, degree of anisotropy and local thickness. It is found that dense Ni4Ti3 precipitates occupy 54% of the volume in the B2 austenite matrix. Parallel Ni4Ti3 precipitates grow alongside the surface of a micro-pore, yielding an asymmetric structure, while nano voids do not seem to affect the growth of Ni4Ti3 precipitates. The small average local thickness of the precipitates around 60 nm allows their coherency with the matrix, and further induces the R-phase transformation in the matrix. On the other hand, the B2 matrix exhibits a winding and narrow structure with a skeleton of 18.20 mm and a thickness similar to the precipitates. This discontinuous matrix segmented by the Ni4Ti3 network and pores is responsible for the gradual transformation by stalling the martensite propagation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000584353100001	Publication Date	2020-08-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.7	Times cited		Open Access	OpenAccess
	Notes	; This work was supported by the National Natural Science Foundation of China under Grant Nos. 51401081 and 51571092, the Natural Science Foundation of Guangdong Province through Key Project under Grant No. 2018B0303110012 and General Project under Grant No. 2017A030313323, and China Scholarship Council (CSC). ;			Approved	Most recent IF: 4.7; 2020 IF: 2.714
	Call Number	UA @ admin @ c:irua:173547			Serial	6590
Permanent link to this record



	Author	Wei, P.; Ke, B.; Xing, L.; Li, C.; Ma, S.; Nie, X.; Zhu, W.; Sang, X.; Zhang, Q.; Van Tendeloo, G.; Zhao, W.
	Title	Atomic-resolution interfacial structures and diffusion kinetics in Gd/Bi0.5Sb1.5Te3 magnetocaloric/thermoelectric composites			Type	A1 Journal article
	Year	2020	Publication	Materials Characterization	Abbreviated Journal	Mater Charact
	Volume	163	Issue		Pages	110240-110248
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The demand of a full solid-state cooling technology based on magnetocaloric and thermoelectric effects has led to a growing interest in screening candidate materials with high-efficiency cooling performance, which also stimulates the exploration of magnetocaloric/thermoelectric hybrid cooling materials. A series of Gd/Bi0.5Sb1.5Te3 composites was fabricated in order to develop the hybrid cooling technology. The chemical composition, phase structure and diffusion kinetics across the reaction layers in Gd/Bi0.5Sb1.5Te3 composites were analyzed at different reaction temperatures. Micro-area elemental analysis indicates that the formation of interfacial phases is dominated by the diffusion of Gd and Te while the diffusion of Bi and Sb is impeded. The interfacial phases, including GdTe2, GdTe3, and intermediate phases GdTex, are identified by atomic-resolution electron microscopy. The concentration modulation of Gd and Te is adapted by altering the stacking of the Te square-net sheets and the corrugated GdTe sheets. Boltzmann-Marano analysis was applied to reveal the diffusion kinetics of Gd and Te in the interfacial layers. The diffusion coefficients of Te in GdTe2 and GdTe3 are much higher than that of Gd while in GdTe the situation is reversed. This study provides a clear picture to understand the interfacial phase structures down to an atomic scale as well as the interfacial diffusion kinetics in Gd/Bi0.5Sb1.5Te3 hybrid cooling materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000551341700045	Publication Date	2020-03-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.7	Times cited	1	Open Access	Not_Open_Access
	Notes	; This work was supported by National Natural Science Foundation of China (Nos. 91963122, 11834012, 51620105014, 51521001, 51902237), National Key Research and Development Program of China (No. 2018YFB0703603), the Fundamental Research Funds for the Central Universities (WUT: 2019III012GX, 183101006). XRD and EPMA experiments were performed at the Center for Materials Research and Testing of Wuhan University of Technology. ;			Approved	Most recent IF: 4.7; 2020 IF: 2.714
	Call Number	UA @ admin @ c:irua:171317			Serial	6456
Permanent link to this record



	Author	Ding, L.; Raskin, J.-P.; Lumbeeck, G.; Schryvers, D.; Idrissi, H.
	Title	TEM investigation of the role of the polycrystalline-silicon film/substrate interface in high quality radio frequency silicon substrates			Type	A1 Journal article
	Year	2020	Publication	Materials Characterization	Abbreviated Journal	Mater Charact
	Volume	161	Issue		Pages	110174-10
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The microstructural characteristics of two polycrystalline silicon (poly-Si) films with different electrical properties produced by low-pressure chemical vapour deposition on top of high resistivity silicon substrates were investigated by advanced transmission electron microscopy (TEM), including high resolution aberration corrected TEM and automated crystallographic orientation mapping in TEM. The results reveal that the nature of the poly-Si film/Si substrate interface is the main factor controlling the electrical resistivity of the poly-Si films. The high resistivity and high electrical linearity of poly-Si films are strongly promoted by the Sigma 3 twin type character of the poly-Si/Si substrate interface, leading to the generation of a huge amount of extended defects including stacking faults, Sigma 3 twin boundaries as well as Sigma 9 grain boundaries at this interface. Furthermore, a high density of interfacial dislocations has been observed at numerous common and more exotic grain boundaries deviating from their standard crystallographic planes. In contrast, poly-Si film/Si substrate interfaces with random character do not favour the formation of such complex patterns of defects, leading to poor electrical resistivity of the poly-Si film. This finding opens windows for the development of high resistivity silicon substrates for Radio Frequency (RF) integrated circuits (ICs) applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000521515800027	Publication Date	2020-01-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.7	Times cited		Open Access	Not_Open_Access
	Notes	; H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). ;			Approved	Most recent IF: 4.7; 2020 IF: 2.714
	Call Number	UA @ admin @ c:irua:168664			Serial	6621
Permanent link to this record



	Author	Boyat, X.; Ballat-Durand, D.; Marteau, J.; Bouvier, S.; Favergeon, J.; Orekhov, A.; Schryvers, D.
	Title	Interfacial characteristics and cohesion mechanisms of linear friction welded dissimilar titanium alloys: Ti–5Al–2Sn–2Zr–4Mo–4Cr (Ti17) and Ti–6Al–2Sn–4Zr–2Mo (Ti6242)			Type	A1 Journal article
	Year	2019	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	158	Issue		Pages	109942
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	A detailed microstructural examination endeavoring to understand the interfacial phenomena yielding to cohesion in solid-state assembling processes was performed. This study focuses on the transition zone of a dissimilar titanium alloy joint obtained by Linear Friction Welding (LFW) the β-metastable Ti17 to the near-α Ti6242. The transition zone delimitating both alloys is characterized by a sharp microstructure change from acicular HCP (Hexagonal Close-Packed) α′ martensitic laths in the Ti6242 to equiaxed BCC β (Body-Centered Cubic) subgrains in the Ti17; these α′ plates were shown to precipitate within prior-β subgrains remarkably more rotated than the ones formed in the Ti17. Both α′ and β microstructures were found to be intermingled within transitional subgrains demarcating a limited gradient from one chemical composition to the other. These peculiar interfacial grains revealed that the cohesive mechanisms between the rubbing surfaces occurred in the single-phase β domain under severe strain and high-temperature conditions. During the hot deformation process, the mutual migration of the crystalline interfaces from one material to another assisted by a continuous dynamic recrystallization process was identified as the main adhesive mechanism at the junction zone. The latter led to successful cohesion between the rubbing surfaces. Once the reciprocating motion stopped, fast cooling caused both materials to experience either a βlean→α′ or βlean→βmetastable transformation in the interfacial zone depending on their local chemical composition. The limited process time and the subsequent hindered chemical homogenization at the transition zone led to retaining the so-called intermingled α’/βm subgrains constituting the border between both Ti-alloys.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000503314000018	Publication Date	2019-10-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited		Open Access
	Notes	The authors gratefully acknowledge the financial support of the French National Research Agency (ANR) through the OPTIMUM ANR- 14-CE27-0017 project. The authors would also like to thank the Hautsde- France Region and the European Regional Development Fund (ERDF) 2014/2020 for the co-funding of this work. The authors would also like to thank ACB for providing LFW samples as well as Airbus for their technical support.			Approved	Most recent IF: 2.714
	Call Number	EMAT @ emat @c:irua:165084			Serial	5441
Permanent link to this record



	Author	Pourbabak, S.; Montero-Sistiaga, M.L.; Schryvers, D.; Van Humbeeck, J.; Vanmeensel, K.
	Title	Microscopic investigation of as built and hot isostatic pressed Hastelloy X processed by Selective Laser Melting			Type	A1 Journal article
	Year	2019	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	153	Issue		Pages	366-371
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Microstructural characteristics of Hastelloy X produced by Selective Laser Melting have been investigated by various microscopic techniques in the as built (AB) condition and after hot isostatic pressing (HIP). At sub-grain level the AB material consists of columnar high density dislocation cells while the HIP sample consists of columnar sub-grains with lower dislocation density that originate from the original dislocation cells, contradicting existing models. The sub-grains contain nanoscale precipitates enriched in Al, Ti, Cr and O, located at sub-grain boundaries in the AB condition and within the grains after HIP. At some grain boundaries, micrometer sized chromium carbides are detected after HIP. Micro hardness within the grains was found to decrease after HIP, which was attributed to the decrease in dislocation density due to recovery annealing.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000472696900040	Publication Date	2019-05-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	2	Open Access	Not_Open_Access
	Notes	S.P. likes to thank the Flemish Science Foundation FWO for financial support under Project G.0366.15N. The authors acknowledge ENGIE Research and Technology Division for the use of the SLM280HL machine and financial support. This work was also made possible through the AUHA13009 grant “TopSPIN for TEM nanostatistics” of the Flemish HERCULES foundation.			Approved	Most recent IF: 2.714
	Call Number	EMAT @ emat @UA @ admin @ c:irua:159974			Serial	5178
Permanent link to this record



	Author	Du, C.; Hoefnagels, J.P.M.; Kolling, S.; Geers, M.G.D.; Sietsma, J.; Petrov, R.; Bliznuk, V.; Koenraad, P.M.; Schryvers, D.; Amin-Ahmadi, B.
	Title	Martensite crystallography and chemistry in dual phase and fully martensitic steels			Type	A1 Journal article
	Year	2018	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	139	Issue		Pages	411-420
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Lath martensite is important in industry because it is the key strengthening component in many advanced high strength steels. The study of crystallography and chemistry of lath martensite is extensive in the literature, however, mostly based on fully martensitic steels. In this work, lath martensite in dual phase steels is investigated with a focus on the substructure identification of the martensite islands and microstructural bands using electron backscattered diffraction, and on the influence of the accompanied tempering process during industrial coating process on the distribution of alloying elements using atom probe tomography. Unlike findings for the fully martensitic steels, no martensite islands with all 24 Kurdjumov-Sachs variants have been observed. Almost all martensite islands contain only one main packet with all six variants and minor variants from the remaining three packets of the same prior austenite grain. Similarly, the martensite bands are typically composed of connected domains originating from prior austenite grains, each containing one main packets (mostly with all variants) and few separate variants. The effect of tempering at similar to 450 degrees C (due to the industrial zinc coating process) has also been investigated. The results show a strong carbon partitioning to lath boundaries and Cottrell atmospheres at dislocation core regions due to the thermal process of coating. In contrast, auto-tempering contributes to the carbon redistribution only in a limited manner. The substitutional elements are all homogenously distributed. The phase transformation process has two effects on the material: mechanically, the earlier-formed laths are larger and softer and therefore more ductile (as revealed by nanoindentation); chemically, due to the higher dislocation density inside the later-formed laths, which are generally smaller, carbon Cottrell atmospheres are predominantly observed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000431469300044	Publication Date	2018-03-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited		Open Access	Not_Open_Access
	Notes				Approved	Most recent IF: 2.714
	Call Number	UA @ lucian @ c:irua:151554			Serial	5033
Permanent link to this record



	Author	Li, K.; Idrissi, H.; Sha, G.; Song, M.; Lu, J.; Shi, H.; Wang, W.; Ringer, S.P.; Du, Y.; Schryvers, D.
	Title	Quantitative measurement for the microstructural parameters of nano-precipitates in Al-Mg-Si-Cu alloys			Type	A1 Journal article
	Year	2016	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	118	Issue	118	Pages	352-362
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Size, number density and volume fraction of nano-precipitates are important microstructural parameters controlling the strengthening of materials. In this work a widely accessible, convenient, moderately time efficient method with acceptable accuracy and precision has been provided for measurement of volume fraction of nano-precipitates in crystalline materials. The method is based on the traditional but highly accurate technique of measuring foil thickness via convergent beam electron diffraction. A new equation is proposed and verified with the aid of 3-dimensional atom probe (3DAP) analysis, to compensate for the additional error resulted from the hardly distinguishable contrast of too short incomplete precipitates cut by the foil surface. The method can be performed on a regular foil specimen with a modem LaB6 or field-emission-gun transmission electron microscope. Precisions around +/- 16% have been obtained for precipitate volume fractions of needle-like beta ''/C and Q precipitates in an aged Al-Mg-Si-Cu alloy. The measured number density is dose to that directly obtained using 3DAP analysis by a misfit of 45%, and the estimated precision for number density measurement is about +/- 11%. The limitations of the method are also discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000383292000042	Publication Date	2016-06-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	9	Open Access
	Notes	This work is financially supported by National Natural Science Foundation of China (51501230 and 51531009) and Postdoctoral Science Foundation of Central South University (502042057). H.I. acknowledges the IAP program of the Belgian State Federal Office for Scientific, Technical and Cultural Affairs under Contract No. P7/21 and FWO project G.0576.09N.			Approved	Most recent IF: 2.714
	Call Number	EMAT @ emat @ c:irua:137171			Serial	4334
Permanent link to this record



	Author	Lu, J.B.; Schryvers, D.
	Title	Microstructure and phase composition characterization in a Co38Ni33Al29 ferromagnetic shape memory alloy			Type	A1 Journal article
	Year	2016	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	118	Issue	118	Pages	9-13
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Transmission electron microscopy was performed to investigate the microstructures of a secondary phase and its surrounding matrix in a Co38Ni33Al29 ferromagnetic shape memory alloy. The secondary phase shows a γ′ L12 structure exhibiting a dendritic morphology with enclosed B2 austenite regions while the matrix shows the L10 martensitic structure. A secondary phase-austenite-martensite sandwich structure with residual austenite ranging from several hundred nanometers to several micrometers wide is observed at the secondary phase-martensite interface due to the depletion of Co and enrichment of Al in the chemical gradient zone and the effect of the strong martensitic start temperature dependency of the element concentrations. The crystallographic orientation relationship of the secondary phase and the B2 austenite fits the Kurdjumov-Sachs relationship.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000383292000002	Publication Date	2016-05-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	3	Open Access
	Notes	J.B. Lu thanks the Belgian Science Ministry (Belspo) for support of his post-doctoral research stay at EMAT. We thank S. Sedlakova-Ignacova from the Institute of Physics in Prague, Czech Republic, for providing samples.			Approved	Most recent IF: 2.714
	Call Number	c:irua:133100			Serial	4071
Permanent link to this record



	Author	Ji, G.; Tan, Z.; Lu, Y.; Schryvers, D.; Li, Z.; Zhang, D.
	Title	Heterogeneous interfacial chemical nature and bonds in a W-coated diamond/Al composite			Type	A1 Journal article
	Year	2016	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	112	Issue	112	Pages	129-133
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Heterogeneous Al/Al4C3/Al2O3/diamond{111}, Al/nanolayered Al4C3/diamond{111} and Al12W particle/Al4C3/Al2O3/diamond{111} multi-interfaces have been developed at the nanoscale in a W-coated diamond/Al composite produced by vacuum hot pressing. The formation of nanoscale Al4C3 crystals is strongly associated with local O enrichment and can be further promoted by Al12W interfacial particles. The latter effectively contributes to enhance interfacial chemical bonding reducing interfacial thermal resistance and, in turn, enhancing thermal conductivity.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000370109200015	Publication Date	2015-12-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	7	Open Access
	Notes	This work is financially supported by the FWO project of Belgium (No. U2 FA 070100/3506), the travel funding BQR (No. R8DIV AUE) provided by Université Lille 1, the National Natural Science Foundation of China (Grant No. 51401123) and the China Postdoctoral Science Foundation (Grant No. 2014 M561469) for Dr. Z.Q. Tan. Dr. W.G. Grünewald (LeicaMicrosystems, Germany) is also thanked for the assistance of surface preparation.			Approved	Most recent IF: 2.714
	Call Number	c:irua:129976			Serial	3987
Permanent link to this record



	Author	Yan, L.; Tan, Z.; Ji, G.; Li, Z.; Fan, G.; Schryvers, D.; Shan, A.; Zhang, D.
	Title	A quantitative method to characterize the Al4C3-formed interfacial reaction: the case study of MWCNT/Al composites			Type	A1 Journal article
	Year	2015	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	112	Issue	112	Pages	213-218
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The Al4C3-formed interfacial reaction plays an important role in tuning the mechanical and thermal properties of carbon/aluminum (C/Al) composites reinforced with carbonaceous materials such as multi-wall carbon nanotube (MWCNT) and graphene nanosheet. In terms of the hydrolysis nature of Al4C3, an electrochemical dissolution method was developed to quantitatively characterize the extent of C/Al interfacial reaction, which involves dissolving the composite samples in alkaline solution first, then collecting and measuring the CH4 gas released by Al4C3 hydrolysis with a gas chromatograph. Through a case study with powder metallurgy fabricated 2.0 wt.% MWCNT/Al composites, the detectability limit of the proposed method is 0.4 wt.% Al4C3, corresponding to 5 % extent of interfacial reaction with a measurement error of ±3 %. And then, with the already known MWCNT/Al reaction extent vs different sintering temperature and time, the reaction kinetics with an activation energy of 281 kJ mol-1 was successfully derived. Therefore, this rapid, sensitive, accurate method supplies an useful tool to optimize the processing and properties of all kinds of C/Al composites via interface design/control.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000370109200026	Publication Date	2015-12-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	24	Open Access
	Notes	The authors would like to acknowledge the financial support of the National Basic Research Program of China (973 Program, No. 2012CB619600), the National High-Tech R&D Program (863 Program, No. 2012AA030611), the National Natural Science Foundation (Nos. 51071100, 51131004, 51401123, 51511130038) and the research grant (Nos. 14DZ2261200, 15JC1402100, 14520710100) from Shanghai government. Dr. Z.Q. Tan would also like to thank the project funded by the China Postdoctoral Science Foundation (No. 2014M561469). The research leading to these results has partially received funding from the European Union Seventh Framework Program under Grant Agreement 312483 – ESTEEM2 (Integrated Infrastructure Initiative – I3).; esteem2_jra2			Approved	Most recent IF: 2.714; 2015 IF: 1.845
	Call Number	c:irua:130066 c:irua:130066			Serial	3997
Permanent link to this record



	Author	Tang, Y.; Chen, Z.; Borbely, A.; Ji, G.; Zhong, S.Y.; Schryvers, D.; Ji, V.; Wang, H.W.
	Title	Quantitative study of particle size distribution in an in-situ grown Al-TiB2 composite by synchrotron X-ray diffraction and electron microscopy			Type	A1 Journal article
	Year	2015	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	102	Issue	102	Pages	131-136
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Synchrotron X-ray diffraction and transmission electron microscopy (TEM) were applied to quantitatively characterize the average particle size and size distribution of free-standing TiB2 particles and TiB2 particles in an insitu grown Al–TiB2 composite. The detailed evaluations were carried out by X-ray line profile analysis using the restrictedmoment method and multiplewhole profile fitting procedure (MWP). Both numericalmethods indicate that the formed TiB2 particles are well crystallized and free of crystal defects. The average particle size determined from different Bragg reflections by the restricted moment method ranges between 25 and 55 nm, where the smallest particle size is determined using the 110 reflection suggesting the highest lateral-growth velocity of (110) facets. TheMWP method has shown that the in-situ grown TiB2 particles have a very low dislocation density (~1011 m−2) and their size distribution can be described by a log-normal distribution. Good agreement was found between the results obtained from the restricted moment and MWP methods, which was further confirmed by TEM.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000355335200017	Publication Date	2015-03-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	41	Open Access
	Notes	This work is financially supported by the National Natural Science Foundation of China (Grant No. 51201099 and No. 51301108) and the China Postdoctoral Science Foundation (Grant No. 2013T60443 and No. 2012M520891). The authors are grateful for the project 2013BB03 supported by NPL, CAEP. Many thanks are also due to the faculty of BL14B beamline at the Shanghai Synchrotron Radiation Facility for their help on synchrotron experiments.			Approved	Most recent IF: 2.714; 2015 IF: 1.845
	Call Number	c:irua:126443			Serial	2764
Permanent link to this record



	Author	Espinoza Torres, C.; Condó, A.M.; Haberkorn, N.; Zelaya, E.; Schryvers, D.; Guimpel, J.; Lovey, F.C.
	Title	Structures in textured Cu-Al-Ni shape memory thin films grown by sputtering			Type	A1 Journal article
	Year	2014	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	96	Issue		Pages	256-262
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The structure and texture formation in CuAlNi thin films of different thicknesses (1 μm to 5 μm) grown by DC magnetron sputtering without any intentional heating of the substrate are reported. The as-grown films present grains with an average size of 20 nm. The films with thickness of 1 μm have a single metastable phase with a hexagonal structure and are textured with planes (0002) parallel to the plane of the films. It was observed that thicker films present phase coexistence between metastable hexagonal and body centered cubic structures with a gradual increment of the body centered cubic phase fraction. The films with thickness of 5 μm are textured with planes (0002) and View the MathML source101¯0 in the hexagonal structure, whereas in the body centered cubic structure the films are textured with {110} planes parallel to the plane of the films. This fact can be associated with self-heating of the substrate during the growth of the films and with the relative stability of the metastable phases. Free standing films annealed in a second step (1123 K for 1 h) present austenitic phase with L21 structure and sub-micrometric grains textured with {220}L21 planes parallel to the plane of the films. The martensitic transformation temperature was determined from the analysis of resistance against temperature measurements.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000343346400032	Publication Date	2014-08-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	9	Open Access
	Notes	(CONICET PIP 11220090100457) and MINCYT-FWO International Exchange Project FW/09/03 is also acknowledged			Approved	Most recent IF: 2.714; 2014 IF: 1.845
	Call Number	UA @ lucian @ c:irua:118931			Serial	3321
Permanent link to this record



	Author	Ji, G.; Tan, Z.; Shabadi, R.; Li, Z.; Grünewald, W.; Addad, A.; Schryvers, D.; Zhang, D.
	Title	Triple ion beam cutting of diamond/Al composites for interface characterization			Type	A1 Journal article
	Year	2014	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	89	Issue		Pages	132-137
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A novel triple ion beam cutting technique was employed to prepare high-quality surfaces of diamond/Al composites for interfacial characterization, which has been unachievable so far. Near-perfect and artifact-free surfaces were obtained without mechanical pre-polishing. Hence, the as-prepared surfaces are readily available for further study and also, ready to be employed in a focus ion beam system for preferential selection of transmission electron microscopy samples. Dramatically different diamond/Al interface configurations – sub-micrometer Al2O3 particles and clean interfaces were unambiguously revealed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000333513400015	Publication Date	2014-01-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	9	Open Access
	Notes	Fwo			Approved	Most recent IF: 2.714; 2014 IF: 1.845
	Call Number	UA @ lucian @ c:irua:113394			Serial	3735
Permanent link to this record



	Author	Peirs, J.; Tirry, W.; Amin-Ahmadi, B.; Coghe, F.; Verleysen, P.; Rabet, L.; Schryvers, D.; Degrieck, J.
	Title	Microstructure of adiabatic shear bands in Ti6Al4V			Type	A1 Journal article
	Year	2013	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	75	Issue		Pages	79-92
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Microstructural deformation mechanisms in adiabatic shear bands in Ti6Al4V are studied using traditional TEM and selected area diffraction, and more advanced microstructural characterisation techniques such as energy dispersive X-ray spectroscopy, high angle annular dark field STEM and conical dark field TEM. The shear bands under investigation are induced in Ti6Al4V samples by high strain rate compression of cylindrical and hat-shaped specimens in a split Hopkinson pressure bar setup. Samples from experiments interrupted at different levels of deformation are used to study the evolution of the microstructure in and nearby the shear bands. From the early stages of adiabatic shear band formation, TEM revealed strongly elongated equiaxed grains in the shear band. These band-like grains become narrower towards the centre of the band and start to fraction even further along their elongated direction to finally result in a nano-crystalline region in the core. In fully developed shear bands, twins and a needle-like martensite morphology are observed near the shear band.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000314860900011	Publication Date	2012-11-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	56	Open Access
	Notes	Iuap; Fwo			Approved	Most recent IF: 2.714; 2013 IF: 1.925
	Call Number	UA @ lucian @ c:irua:105300			Serial	2065
Permanent link to this record



	Author	Tirry, W.; Bouvier, S.; Benmhenni, N.; Hammami, W.; Habraken, A.M.; Coghe, F.; Schryvers, D.; Rabet, L.
	Title	Twinning in pure Ti subjected to monotonic simple shear deformation			Type	A1 Journal article
	Year	2012	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	72	Issue		Pages	24-36
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The aim of this paper is to provide a thorough study on the occurrence and importance of deformation twinning in simple shear deformed pure α-Ti. A statistically relevant inspection of the morphology of the deformation twins in relation to the applied strain/deformation is performed. The investigated microstructural aspects are the twin volume fraction, the twin thickness distribution and the resolved shear stress distribution on the twin plane. All these aspects are examined as a function of the twin types and two initial textures. Monotonic simple shear experiments are carried out for three different loading directions with respect to a direction linked to the initial crystallographic texture. EBSD and TEM observations reveal the presence of View the MathML source and View the MathML source twins. The statistical analysis reveals that View the MathML source and View the MathML source twins have a similar average thickness around 1.9 nm, but the View the MathML source twins show a far larger spread on their thickness and can grow to almost the size of the original parent grain. Correlation of the twin fractions with the RSS analysis shows that RSS is an acceptable method explaining the difference in twin fractions for different textures and orientations. A detailed analysis shows that View the MathML source twins occur in average with a smaller volume fraction but with a higher RSS, indicating they are more difficult to nucleate or grow compared to View the MathML source twinning. In general a higher RSS value on the twin plane is not connected to a higher twin thickness; only in the case of View the MathML source twins the highest RSS values show clearly thicker twins.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000309086700004	Publication Date	2012-07-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	25	Open Access
	Notes	Iap			Approved	Most recent IF: 2.714; 2012 IF: 1.880
	Call Number	UA @ lucian @ c:irua:101225			Serial	3768
Permanent link to this record