NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	1–30 of 490 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 >>

List View

Citations

Details

	Records
	Author	Batenburg, K.J.; Bals, S.; Sijbers, J.; Kübel, C.; Midgley, P.A.; Hernandez, J.C.; Kaiser, U.; Encina, E.R.; Coronado, E.A.; Van Tendeloo, G.
	Title	3D imaging of nanomaterials by discrete tomography			Type	A1 Journal article
	Year	2009	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	109	Issue	6	Pages	730-740
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	The field of discrete tomography focuses on the reconstruction of samples that consist of only a few different materials. Ideally, a three-dimensional (3D) reconstruction of such a sample should contain only one grey level for each of the compositions in the sample. By exploiting this property in the reconstruction algorithm, either the quality of the reconstruction can be improved significantly, or the number of required projection images can be reduced. The discrete reconstruction typically contains fewer artifacts and does not have to be segmented, as it already contains one grey level for each composition. Recently, a new algorithm, called discrete algebraic reconstruction technique (DART), has been proposed that can be used effectively on experimental electron tomography datasets. In this paper, we propose discrete tomography as a general reconstruction method for electron tomography in materials science. We describe the basic principles of DART and show that it can be applied successfully to three different types of samples, consisting of embedded ErSi2 nanocrystals, a carbon nanotube grown from a catalyst particle and a single gold nanoparticle, respectively.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000265816400005	Publication Date	2009-02-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	220	Open Access
	Notes	Fwo; Esteem 026019			Approved	Most recent IF: 2.843; 2009 IF: 2.067
	Call Number	UA @ lucian @ c:irua:74665 c:irua:74665			Serial	12
Permanent link to this record



	Author	Roelandts, T.; Batenburg, K.J.; Biermans, E.; Kübel, C.; Bals, S.; Sijbers, J.
	Title	Accurate segmentation of dense nanoparticles by partially discrete electron tomography			Type	A1 Journal article
	Year	2012	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	114	Issue		Pages	96-105
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Accurate segmentation of nanoparticles within various matrix materials is a difficult problem in electron tomography. Due to artifacts related to image series acquisition and reconstruction, global thresholding of reconstructions computed by established algorithms, such as weighted backprojection or SIRT, may result in unreliable and subjective segmentations. In this paper, we introduce the Partially Discrete Algebraic Reconstruction Technique (PDART) for computing accurate segmentations of dense nanoparticles of constant composition. The particles are segmented directly by the reconstruction algorithm, while the surrounding regions are reconstructed using continuously varying gray levels. As no properties are assumed for the other compositions of the sample, the technique can be applied to any sample where dense nanoparticles must be segmented, regardless of the surrounding compositions. For both experimental and simulated data, it is shown that PDART yields significantly more accurate segmentations than those obtained by optimal global thresholding of the SIRT reconstruction.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000301954300011	Publication Date	2012-01-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	34	Open Access
	Notes	Fwo			Approved	Most recent IF: 2.843; 2012 IF: 2.470
	Call Number	UA @ lucian @ c:irua:97710			Serial	52
Permanent link to this record



	Author	Goris, B.; Roelandts, T.; Batenburg, K.J.; Heidari Mezerji, H.; Bals, S.
	Title	Advanced reconstruction algorithms for electron tomography : from comparison to combination			Type	A1 Journal article
	Year	2013	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	127	Issue		Pages	40-47
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	In this work, the simultaneous iterative reconstruction technique (SIRT), the total variation minimization (TVM) reconstruction technique and the discrete algebraic reconstruction technique (DART) for electron tomography are compared and the advantages and disadvantages are discussed. Furthermore, we describe how the result of a three dimensional (3D) reconstruction based on TVM can provide objective information that is needed as the input for a DART reconstruction. This approach results in a tomographic reconstruction of which the segmentation is carried out in an objective manner.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000316659100007	Publication Date	2012-08-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	63	Open Access
	Notes	Fwo			Approved	Most recent IF: 2.843; 2013 IF: 2.745
	Call Number	UA @ lucian @ c:irua:101217			Serial	72
Permanent link to this record



	Author	Casavola, M.; van Huis, M.A.; Bals, S.; Lambert, K.; Hens, Z.; Vanmaekelbergh, D.
	Title	Anisotropic cation exchange in PbSe/CdSe core/shell nanocrystals of different geometry			Type	A1 Journal article
	Year	2012	Publication	Chemistry of materials	Abbreviated Journal	Chem Mater
	Volume	24	Issue	2	Pages	294-302
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We present a study of Cd2+-for-Pb2+ exchange in PbSe nanocrystals (NCs) with cube, star, and rod shapes. Prolonged temperature-activated cation exchange results in PbSe/CdSe heterostructured nanocrystals (HNCs) that preserve their specific overall shape, whereas the PbSe core is strongly faceted with dominance of {111} facets. Hence, cation exchange proceeds while the Se anion lattice is preserved, and well-defined {111}/{111} PbSe/CdSe interfaces develop. Interestingly, by quenching the reaction at different stages of the cation exchange new structures have been isolated, such as coreshell nanorods, CdSe rods that contain one or two separated PbSe dots and fully zinc blende CdSe nanorods. The crystallographically anisotropic cation exchange has been characterized by a combined HRTEM/HAADF-STEM study of heterointerface evolution over reaction time and temperature. Strikingly, Pb and Cd are only intermixed at the PbSe/CdSe interface. We propose a plausible model for the cation exchange based on a layer-by-layer replacement of Pb2+ by Cd2+ enabled by a vacancy-assisted cation migration mechanism.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000299367500008	Publication Date	2011-11-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0897-4756;1520-5002;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.466	Times cited	136	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 9.466; 2012 IF: 8.238
	Call Number	UA @ lucian @ c:irua:94211			Serial	124
Permanent link to this record



	Author	Bals, S.; Kabius, B.; Haider, M.; Radmilovic, V.; Kisielowski, C.
	Title	Annular dark field imaging in a TEM			Type	A1 Journal article
	Year	2004	Publication	Solid state communications	Abbreviated Journal	Solid State Commun
	Volume	130	Issue	10	Pages	675-680
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Annular objective apertures are fabricated for a CM300 transmission electron microscope using a focused ion beam system. A central beam stop in the back focal plane of the objective lens of the microscope blocks all electrons scattered up to a semi-angle of approximately 20 mrad. In this manner, contributions to the image from Bragg scattering are largely reduced and the image contrast is sensitive to the atomic number Z. Experimentally, we find that single atom scattering cross sections measured with this technique are close to Rutherford scattering values. A comparison between this new method and STEM-HAADF shows that both techniques result in qualitatively similar images although the resolution of ADF-TEM is limited by contrast delocalization caused by the spherical aberration of the objective lens. This problem can be overcome by using an aberration corrected microscope.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000221489300007	Publication Date	2004-04-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0038-1098;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.554	Times cited	43	Open Access
	Notes				Approved	Most recent IF: 1.554; 2004 IF: 1.523
	Call Number	UA @ lucian @ c:irua:87584			Serial	132
Permanent link to this record



	Author	Leroux, F.; Bladt, E.; Timmermans, J.-P.; Van Tendeloo, G.; Bals, S.
	Title	Annular dark-field transmission electron microscopy for low contrast materials			Type	A1 Journal article
	Year	2013	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	19	Issue	3	Pages	629-634
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Imaging soft matter by transmission electron microscopy (TEM) is anything but straightforward. Recently, interest has grown in developing alternative imaging modes that generate contrast without additional staining. Here, we present a dark-field TEM technique based on the use of an annular objective aperture. Our experiments demonstrate an increase in both contrast and signal-to-noise ratio in comparison to conventional bright-field TEM. The proposed technique is easy to implement and offers an alternative imaging mode to investigate soft matter.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000319126300014	Publication Date	2013-04-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	5	Open Access
	Notes	262348 Esmi; Fwo G002410n G018008			Approved	Most recent IF: 1.891; 2013 IF: 2.161
	Call Number	UA @ lucian @ c:irua:108712			Serial	133
Permanent link to this record



	Author	Turner, S.; Tavernier, S.M.F.; Huyberechts, G.; Bals, S.; Batenburg, K.J.; Van Tendeloo, G.
	Title	Assisted spray pyrolysis production and characterisation of ZnO nanoparticles with narrow size distribution			Type	A1 Journal article
	Year	2010	Publication	Journal of nanoparticle research	Abbreviated Journal	J Nanopart Res
	Volume	12	Issue	2	Pages	615-622
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Nano-sized ZnO particles with a narrow size distribution and high crystallinity were prepared from aqueous solutions with high concentrations of Zn2+ containing salts and citric acid in a conventional spray pyrolysis setup. Structure, morphology and size of the produced material were compared to ZnO material produced by simple spray pyrolysis of zinc nitrates in the same experimental setup. Using transmission electron microscopy and electron tomography it has been shown that citric acid-assisted spray pyrolysed material is made up of micron sized secondary particles comprising a shell of lightly agglomerated, monocrystalline primary ZnO nanoparticles with sizes in the 2030 nm range, separable by a simple ultrasonic treatment step.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	S.l.	Editor
	Language		Wos	000275318700025	Publication Date	2009-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1388-0764;1572-896X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.02	Times cited	27	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 2.02; 2010 IF: 3.253
	Call Number	UA @ lucian @ c:irua:81771			Serial	156
Permanent link to this record



	Author	Deng, S.; Verbruggen, S.W.; He, Z.; Cott, D.J.; Vereecken, P.M.; Martens, J.A.; Bals, S.; Lenaerts, S.; Detavernier, C.
	Title	Atomic layer deposition-based synthesis of photoactive TiO₂ nanoparticle chains by using carbon nanotubes as sacrificial templates			Type	A1 Journal article
	Year	2014	Publication	RSC advances	Abbreviated Journal	Rsc Adv
	Volume	4	Issue	23	Pages	11648-11653
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Highly ordered and self supported anatase TiO2 nanoparticle chains were fabricated by calcining conformally TiO2 coated multi-walled carbon nanotubes (MWCNTs). During annealing, the thin tubular TiO2 coating that was deposited onto the MWCNTs by atomic layer deposition (ALD) was transformed into chains of TiO2 nanoparticles ([similar]12 nm diameter) with an ultrahigh surface area (137 cm2 per cm2 of substrate), while at the same time the carbon from the MWCNTs was removed. Photocatalytic tests on the degradation of acetaldehyde proved that these forests of TiO2 nanoparticle chains are highly photoactive under UV light because of their well crystallized anatase phase.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000332470000017	Publication Date	2014-02-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2046-2069;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.108	Times cited	45	Open Access	Not_Open_Access
	Notes	; The authors wish to thank the Research Foundation – Flanders (FWO) and UGENT-GOA-01G01513 for financial support. The authors acknowledge the European Research Council for funding under the European Union's Seventh Framework Programme (FP7/2007-2013)/ERC grant agreement no. 239865-COCOON and no. 246791-COUNTATOMS. JAM acknowledges the Flemish government for long-term structural funding (Methusalem). ;			Approved	Most recent IF: 3.108; 2014 IF: 3.840
	Call Number	UA @ lucian @ c:irua:117298			Serial	168
Permanent link to this record



	Author	Goris, B.; Bals, S.; van den Broek, W.; Carbó-Argibay, E.; Gómez-Graña, S.; Liz-Marzán, L.M.; Van Tendeloo, G.
	Title	Atomic-scale determination of surface facets in gold nanorods			Type	A1 Journal article
	Year	2012	Publication	Nature materials	Abbreviated Journal	Nat Mater
	Volume	11	Issue	11	Pages	930-935
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	It is widely accepted that the physical properties of nanostructures depend on the type of surface facets1, 2. For Au nanorods, the surface facets have a major influence on crucial effects such as reactivity and ligand adsorption and there has been controversy regarding facet indexing3, 4. Aberration-corrected electron microscopy is the ideal technique to study the atomic structure of nanomaterials5, 6. However, these images correspond to two-dimensional (2D) projections of 3D nano-objects, leading to an incomplete characterization. Recently, much progress was achieved in the field of atomic-resolution electron tomography, but it is still far from being a routinely used technique. Here we propose a methodology to measure the 3D atomic structure of free-standing nanoparticles, which we apply to characterize the surface facets of Au nanorods. This methodology is applicable to a broad range of nanocrystals, leading to unique insights concerning the connection between the structure and properties of nanostructures.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000310434600015	Publication Date	2012-10-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1476-1122;1476-4660;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	39.737	Times cited	261	Open Access
	Notes	262348 ESMI; Hercules 3; 24691 COUNTATOMS; 267867 PLASMAQUO			Approved	Most recent IF: 39.737; 2012 IF: 35.749
	Call Number	UA @ lucian @ c:irua:101778			Serial	182
Permanent link to this record



	Author	Bals, S.; Van Aert, S.; Romero, C.P.; Lauwaet, K.; Van Bael, M.J.; Schoeters, B.; Partoens, B.; Yuecelen, E.; Lievens, P.; Van Tendeloo, G.
	Title	Atomic scale dynamics of ultrasmall germanium clusters			Type	A1 Journal article
	Year	2012	Publication	Nature communications	Abbreviated Journal	Nat Commun
	Volume	3	Issue	897	Pages	897
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
	Abstract	Starting from the gas phase, small clusters can be produced and deposited with huge flexibility with regard to composition, materials choice and cluster size. Despite many advances in experimental characterization, a detailed morphology of such clusters is still lacking. Here we present an atomic scale observation as well as the dynamical behaviour of ultrasmall germanium clusters. Using quantitative scanning transmission electron microscopy in combination with ab initio calculations, we are able to characterize the transition between different equilibrium geometries of a germanium cluster consisting of less than 25 atoms. Seven-membered rings, trigonal prisms and some smaller subunits are identified as possible building blocks that stabilize the structure.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000306099900024	Publication Date	2012-06-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2041-1723;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.124	Times cited	90	Open Access
	Notes	Fwo; Iap; Iwt			Approved	Most recent IF: 12.124; 2012 IF: 10.015
	Call Number	UA @ lucian @ c:irua:100340			Serial	183
Permanent link to this record



	Author	Gómez-Graña, S.; Goris, B.; Altantzis, T.; Fernández-López, C.; Carbó-Argibay, E.; Guerrero-Martínez, A.; Almora-Barrios, N.; López, N.; Pastoriza-Santos, I.; Pérez-Juste, J.; Bals, S.; Van Tendeloo, G.; Liz-Marzán, L.M.;
	Title	Au@Ag nanoparticles : halides stabilize {100} facets			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry letters	Abbreviated Journal	J Phys Chem Lett
	Volume	4	Issue	13	Pages	2209-2216
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Seed-mediated growth is the most efficient methodology to control the size and shape of colloidal metal nanoparticles. In this process, the final nanocrystal shape is defined by the crystalline structure of the initial seed as well as by the presence of ligands and other additives that help to stabilize certain crystallographic facets. We analyze here the growth mechanism in aqueous solution of silver shells on presynthesized gold nanoparticles displaying various well-defined crystalline structures and morphologies. A thorough three-dimensional electron microscopy characterization of the morphology and internal structure of the resulting core-shell nanocrystals indicates that {100} facets are preferred for the outer silver shell, regardless of the morphology and crystallinity of the gold cores. These results are in agreement with theoretical analysis based on the relative surface energies of the exposed facets in the presence of halide ions.
	Address
	Corporate Author				Thesis
	Publisher	American Chemical Society	Place of Publication	Washington, D.C	Editor
	Language		Wos	000321809500018	Publication Date	2013-06-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1948-7185;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.353	Times cited	131	Open Access
	Notes	267867 Plasmaquo; 246791 COUNTATOMS; 262348 ESMI; FWO			Approved	Most recent IF: 9.353; 2013 IF: 6.687
	Call Number	UA @ lucian @ c:irua:109811			Serial	204
Permanent link to this record



	Author	Schouteden, K.; Zeng, Y.-J.; Lauwaet, K.; Romero, C.P.; Goris, B.; Bals, S.; Van Tendeloo, G.; Lievens, P.; Van Haesendonck, C.
	Title	Band structure quantization in nanometer sized ZnO clusters			Type	A1 Journal article
	Year	2013	Publication	Nanoscale	Abbreviated Journal	Nanoscale
	Volume	5	Issue	9	Pages	3757-3763
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Nanometer sized ZnO clusters are produced in the gas phase and subsequently deposited on clean Au(111) surfaces under ultra-high vacuum conditions. The zinc blende atomic structure of the approximately spherical ZnO clusters is resolved by high resolution scanning transmission electron microscopy. The large band gap and weak n-type conductivity of individual clusters are determined by scanning tunnelling microscopy and spectroscopy at cryogenic temperatures. The conduction band is found to exhibit clear quantization into discrete energy levels, which can be related to finite-size effects reflecting the zero-dimensional confinement. Our findings illustrate that gas phase cluster production may provide unique possibilities for the controlled fabrication of high purity quantum dots and heterostructures that can be size selected prior to deposition on the desired substrate under controlled ultra-high vacuum conditions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000317859400026	Publication Date	2013-03-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2040-3364;2040-3372;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.367	Times cited	13	Open Access
	Notes	FWO; Hercules; COUNTATOMS			Approved	Most recent IF: 7.367; 2013 IF: 6.739
	Call Number	UA @ lucian @ c:irua:108518			Serial	219
Permanent link to this record



	Author	Molina, L.; Tan, H.; Biermans, E.; Batenburg, K.J.; Verbeeck, J.; Bals, S.; Van Tendeloo, G.
	Title	Barrier efficiency of sponge-like La₂Zr₂O₇ buffer layers for YBCO-coated conductors			Type	A1 Journal article
	Year	2011	Publication	Superconductor science and technology	Abbreviated Journal	Supercond Sci Tech
	Volume	24	Issue	6	Pages	065019-065019,8
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Solution derived La2Zr2O7 films have drawn much attention for potential applications as thermal barriers or low-cost buffer layers for coated conductor technology. Annealing and coating parameters strongly affect the microstructure of La2Zr2O7, but different film processing methods can yield similar microstructural features such as nanovoids and nanometer-sized La2Zr2O7 grains. Nanoporosity is a typical feature found in such films and the implications for the functionality of the films are investigated by a combination of scanning transmission electron microscopy (STEM), electron energy-loss spectroscopy (EELS) and quantitative electron tomography. Chemical solution based La2Zr2O7 films deposited on flexible Ni5 at.%W substrates with a {100}lang001rang biaxial texture were prepared for an in-depth characterization. A sponge-like structure composed of nanometer-sized voids is revealed by high-angle annular dark-field scanning transmission electron microscopy in combination with electron tomography. A three-dimensional quantification of nanovoids in the La2Zr2O7 film is obtained on a local scale. Mostly non-interconnected highly faceted nanovoids compromise more than one-fifth of the investigated sample volume. The diffusion barrier efficiency of a 170 nm thick La2Zr2O7 film is investigated by STEM-EELS, yielding a 1.8 ± 0.2 nm oxide layer beyond which no significant nickel diffusion can be detected and intermixing is observed. This is of particular significance for the functionality of YBa2Cu3O7 − δ coated conductor architectures based on solution derived La2Zr2O7 films as diffusion barriers.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000290472900021	Publication Date	2011-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0953-2048;1361-6668;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.878	Times cited	31	Open Access
	Notes	Esteem 026019; Fwo			Approved	Most recent IF: 2.878; 2011 IF: 2.662
	Call Number	UA @ lucian @ c:irua:88639UA @ admin @ c:irua:88639			Serial	221
Permanent link to this record



	Author	Martens, J.A.; Thybaut, J.W.; Denayer, J.F.M.; Sree, S.P.; Aerts, A.; Reyniers, M.-F.; van Speybroeck, V.; Waroquier, M.; Buekenhoudt, A.; Vankelecom, I.; Buijs, W.; Persoons, J.; Baron, G.V.; Bals, S.; Van Tendeloo, G.; Marin, G.B.; Jacobs, P.A.; Kirschhock, C.E.A.
	Title	Catalytic and molecular separation properties of Zeogrids and Zeotiles			Type	A1 Journal article
	Year	2011	Publication	Catalysis today	Abbreviated Journal	Catal Today
	Volume	168	Issue	1	Pages	17-27
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Zeogrids and Zeotiles are hierarchical materials built from assembled MFI zeolite precursor units. Permanent secondary porosity in these materials is obtained through self assembly of nanoparticles encountered in MFI zeolite synthesis in the presence of supramolecular templates. Hereon, the aggregated species are termed nanoslabs. Zeogrids are layered materials with lateral spacings between nanoslabs creating galleries qualifying as supermicropores. Zeotiles present a diversity of tridimensional nanoslab assemblies with mesopores. Zeotile-1, -4 and -6 are hexagonal mesostructures. Zeotile-1 has triangular and hexagonal channels; Zeotile-4 has hexagonal channels interconnected via slits. Zeotile-2 has a cubic structure with gyroid type mesoporosity. The behavior of Zeogrids and Zeotiles in adsorption, membrane and chromatographic separation and catalysis has been characterized and compared with zeolites and mesoporous materials derived from unstructured silica sources. Shape selectivity was detected via adsorption of n- and iso-alkanes. The mesoporosity of Zeotiles can be exploited in chromatographic separation of biomolecules. Zeotiles present attractive separation properties relevant to CO2 sequestration. Because of its facile synthesis procedure without hydrothermal steps Zeogrid is convenient for membrane synthesis. The performance of Zeogrid membrane in gas separation, nanofiltration and pervaporation is reported. In the Beckmann rearrangement of cyclohexanone oxime Zeogrids and Zeotiles display a catalytic activity characteristic of silicalite-1 zeolites. Introduction of acidity and redox catalytic activity can be achieved via incorporation of Al and Ti atoms in the nanoslabs during synthesis. Zeogrids are active in hydrocracking, catalytic cracking, alkylation and epoxidation reactions. Zeogrids and Zeotiles often behave differently from ordered mesoporous materials as well as from zeolites and present a valuable extension of the family of hierarchical silicate based materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000291033300003	Publication Date	2011-03-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0920-5861;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.636	Times cited	13	Open Access
	Notes	Fwo; Iap Sbo			Approved	Most recent IF: 4.636; 2011 IF: 3.407
	Call Number	UA @ lucian @ c:irua:88647			Serial	290
Permanent link to this record



	Author	Beyers, E.; Biermans, E.; Ribbens, S.; de Witte, K.; Mertens, M.; Meynen, V.; Bals, S.; Van Tendeloo, G.; Vansant, E.F.; Cool, P.
	Title	Combined TiO₂/SiO₂ mesoporous photocatalysts with location and phase controllable TiO₂ nanoparticles			Type	A1 Journal article
	Year	2009	Publication	Applied catalysis : B : environmental	Abbreviated Journal	Appl Catal B-Environ
	Volume	88	Issue	3/4	Pages	515-524
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	Combined TiO2/SiO2 mesoporous materials were prepared by deposition of TiO2 nanoparticles synthesised via the acid-catalysed solgel method. In the first synthesis step a titania solution is prepared, by dissolving titaniumtetraisopropoxide in nitric acid. The influences of the initial titaniumtetraisopropoxide concentration and the temperature of dissolving on the final structural properties were investigated. In the second step of the synthesis, the titania nanoparticles were deposited on a silica support. Here, the influence of the temperature during deposition was studied. The depositions were carried out on two different mesoporous silica supports, SBA-15 and MCF, leading to substantial differences in the catalytic and structural properties. The samples were analysed with N2-sorption, X-ray diffraction (XRD), electron probe microanalysis (EPMA) and transmission electron microscopy (TEM) to obtain structural information, determining the amount of titania, the crystal phase and the location of the titania particles on the mesoporous material (inside or outside the mesoporous channels). The structural differences of the support strongly determine the location of the nanoparticles and the subsequent photocatalytic activity towards the degradation of rhodamine 6G in aqueous solution under UV irradiation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000266513400032	Publication Date	2008-10-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-3373;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.446	Times cited	69	Open Access
	Notes	Goa-Bof; Fwo			Approved	Most recent IF: 9.446; 2009 IF: 5.252
	Call Number	UA @ lucian @ c:irua:77150			Serial	403
Permanent link to this record



	Author	Lubyshev, D.; Fastenau, J.M.; Fang, X.-M.; Wu, Y.; Doss, C.; Snyder, A.; Liu, W.K.; Lamb, M.S.M.; Bals, S.; Song, C.
	Title	Comparison of As- and P-based metamorphic buffers for high performance InP heterojunction bipolar transistor and high electron mobility transistor applications			Type	A1 Journal article
	Year	2004	Publication	Journal of vacuum science & technology. B. Microelectronics and nanometer structures. Processing, measurement and phenomena	Abbreviated Journal
	Volume	22	Issue	3	Pages	1565-1569
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Metamorphic buffers (M-buffers) consisting of graded InAlAs or bulk InP were employed for the production of InP-based epiwafers on GaAs substrates by molecular-beam epitaxy. The graded InAlAs is the standard for production metamorphic high electron mobility transistors (M-HEMTs), while the bulk InP offers superior thermal properties for higher current density circuits. The surface morphology and crystal structure of the two M-buffers showed different relaxation mechanisms. The graded InAlAs gave a cross-hatched pattern with nearly full relaxation and very effective dislocation filtering, while the bulk InP had a uniform isotropic surface with dislocations propagating further up towards the active layers. Both types of M-buffers had atomic force microscopy root-mean-square roughness values around 2030 Å. The Hall transport properties of high electron mobility transistors (HEMTs) grown on the InAlAs M-buffer, and a baseline HEMT grown lattice matched on InP, both had room-temperature mobilities >10 000 cm2/V s, while the M-HEMT on the InP M-buffer showed a decrease to 9000 cm2/V s. Similarly, the dc parameters of a double heterojunction bipolar transistor (DHBT) grown on the InAlAs M-buffer were much closer to the baseline heterojunction bipolar transistor than a DHBT grown on the InP M-buffer. A high breakdown voltage of 11.3 V was achieved on an M-DHBT with the InAlAs M-buffer. We speculate that the degradation in device characteristics on the InP M-buffer was related to the incomplete dislocation filtering.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Woodbury, N.Y.	Editor
	Language		Wos	000222481400141	Publication Date	2004-07-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0734-211X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	25	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:87596			Serial	427
Permanent link to this record



	Author	di Vece, M.; Bals, S.; Lievens, P.; Van Tendeloo, G.
	Title	Compositional changes of Pd-Au bimetallic nanoclusters upon hydrogenation			Type	A1 Journal article
	Year	2009	Publication	Physical review : B : solid state	Abbreviated Journal	Phys Rev B
	Volume	80	Issue	12	Pages	125420,1-125420,4
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Changes in the size distribution and composition of bimetallic Pd-Au nanoclusters have been observed after hydrogen exposure. This effect is caused by hydrogen-induced Ostwald ripening whereby the hydrogen reduces the binding energy of the cluster atoms leading to their detachment from the cluster. The composition changes due to a difference in mobility of the detached palladium and gold atoms on the surface. Fast palladium atoms contribute to the formation of larger nanoclusters, while the slower gold atoms are confined to the smaller nanoclusters. These transformations in the Pd-Au nanocluster size and composition set a limit for chemical reactions in which such nanoclusters are involved together with hydrogen.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000270383300121	Publication Date	2009-09-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	28	Open Access
	Notes	Fwo; Goa; Iap-Vi; Esteem 026019			Approved	Most recent IF: 3.836; 2009 IF: 3.475
	Call Number	UA @ lucian @ c:irua:79232			Serial	445
Permanent link to this record



	Author	Abakumov, A.M.; Hadermann, J.; Bals, S.; Nikolaev, I.V.; Antipov, E.V.; Van Tendeloo, G.
	Title	Crystallographic shear structures as a route to anion-deficient perovskites			Type	A1 Journal article
	Year	2006	Publication	Angewandte Chemie: international edition in English	Abbreviated Journal	Angew Chem Int Edit
	Volume	45	Issue	40	Pages	6697-6700
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000241474500022	Publication Date	2006-09-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1433-7851;1521-3773;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	11.994	Times cited	62	Open Access
	Notes				Approved	Most recent IF: 11.994; 2006 IF: 10.232
	Call Number	UA @ lucian @ c:irua:61689			Serial	589
Permanent link to this record



	Author	Batenburg, K.J.; Bals, S.; Sijbers, J.; Van Tendeloo, G.
	Title	DART explained: how to carry out a discrete tomography reconstruction			Type	P1 Proceeding
	Year	2008	Publication		Abbreviated Journal
	Volume		Issue		Pages	295-296
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT); Vision lab
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	Springer	Place of Publication	Berlin	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	978-3-540-85154-7	ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:77914			Serial	606
Permanent link to this record



	Author	Huijben, M.; Koster, G.; Kruize, M.K.; Wenderich, S.; Verbeeck, J.; Bals, S.; Slooten, E.; Shi, B.; Molegraaf, H.J.A.; Kleibeuker, J.E.; Van Aert, S.; Goedkoop, J.B.; Brinkman, A.; Blank, D.H.A.; Golden, M.S.; Van Tendeloo, G.; Hilgenkamp, H.; Rijnders, G.;
	Title	Defect engineering in oxide heterostructures by enhanced oxygen surface exchange			Type	A1 Journal article
	Year	2013	Publication	Advanced functional materials	Abbreviated Journal	Adv Funct Mater
	Volume	23	Issue	42	Pages	5240-5248
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The synthesis of materials with well-controlled composition and structure improves our understanding of their intrinsic electrical transport properties. Recent developments in atomically controlled growth have been shown to be crucial in enabling the study of new physical phenomena in epitaxial oxide heterostructures. Nevertheless, these phenomena can be influenced by the presence of defects that act as extrinsic sources of both doping and impurity scattering. Control over the nature and density of such defects is therefore necessary to fully understand the intrinsic materials properties and exploit them in future device technologies. Here, it is shown that incorporation of a strontium copper oxide nano-layer strongly reduces the impurity scattering at conducting interfaces in oxide LaAlO3SrTiO3(001) heterostructures, opening the door to high carrier mobility materials. It is proposed that this remote cuprate layer facilitates enhanced suppression of oxygen defects by reducing the kinetic barrier for oxygen exchange in the hetero-interfacial film system. This design concept of controlled defect engineering can be of significant importance in applications in which enhanced oxygen surface exchange plays a crucial role.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000327480900003	Publication Date	2013-06-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1616-301X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.124	Times cited	87	Open Access
	Notes	Countatoms; Vortex; Fwo; Ifox ECASJO_;			Approved	Most recent IF: 12.124; 2013 IF: 10.439
	Call Number	UA @ lucian @ c:irua:109273UA @ admin @ c:irua:109273			Serial	615
Permanent link to this record



	Author	Verheyen, E.; Joos, L.; Van Havenbergh, K.; Breynaert, E.; Kasian, N.; Gobechiya, E.; Houthoofd, K.; Martineau, C.; Hinterstein, M.; Taulelle, F.; Van Speybroeck, V.; Waroquier, M.; Bals, S.; Van Tendeloo, G.; Kirschhock, C.E.A.; Martens, J.A.;
	Title	Design of zeolite by inverse sigma transformation			Type	A1 Journal article
	Year	2012	Publication	Nature materials	Abbreviated Journal	Nat Mater
	Volume	11	Issue	12	Pages	1059-1064
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Although the search for new zeolites has traditionally been based on trial and error, more rational methods are now available. The theoretical concept of inverse transformation of a zeolite framework to generate a new structure by removal of a layer of framework atoms and contraction has for the first time been achieved experimentally. The reactivity of framework germanium atoms in strong mineral acid was exploited to selectively remove germanium-containing four-ring units from an UTL type germanosilicate zeolite. Annealing of the leached framework through calcination led to the new all-silica COK-14 zeolite with intersecting 12- and 10-membered ring channel systems. An intermediate stage of this inverse transformation with dislodged germanate four-rings still residing in the pores could be demonstrated. Inverse transformation involving elimination of germanium-containing structural units opens perspectives for the synthesis of many more zeolites.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000311432600025	Publication Date	2012-10-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1476-1122;1476-4660;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	39.737	Times cited	140	Open Access
	Notes	Fwo			Approved	Most recent IF: 39.737; 2012 IF: 35.749
	Call Number	UA @ lucian @ c:irua:101783			Serial	661
Permanent link to this record



	Author	Mourdikoudis, S.; Chirea, M.; Altantzis, T.; Pastoriza-Santos, I.; Perez-Juste, J.; Silva, F.; Bals, S.; Liz-Marzan, L.M.
	Title	Dimethylformamide-mediated synthesis of water-soluble platinum nanodendrites for ethanol oxidation electrocatalysis			Type	A1 Journal article
	Year	2013	Publication	Nanoscale	Abbreviated Journal	Nanoscale
	Volume	5	Issue	11	Pages	4776-4784
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Herein we describe the synthesis of water-soluble platinum nanodendrites in dimethylformamide (DMF), in the presence of polyethyleneimine (PEI) as a stabilizing agent. The average size of the dendrites is in the range of 20-25 nm while their porosity can be tuned by modifying the concentration of the metal precursor. Electron tomography revealed different crystalline orientations of nanocrystallites in the nanodendrites and allowed a better understanding of their peculiar branching and porosity. The high surface area of the dendrites (up to 22 m(2) g(-1)) was confirmed by BET measurements, while X-ray diffraction confirmed the abundance of high-index facets in the face-centered-cubic crystal structure of Pt. The prepared nanodendrites exhibit excellent performance in the electrocatalytic oxidation of ethanol in alkaline solution. Sensing, selectivity, cycleability and great tolerance toward poisoning were demonstrated by cyclic voltammetry measurements.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000319008700028	Publication Date	2013-04-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2040-3364;2040-3372;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.367	Times cited	50	Open Access
	Notes	Esf; 262348 Esmi			Approved	Most recent IF: 7.367; 2013 IF: 6.739
	Call Number	UA @ lucian @ c:irua:109060			Serial	705
Permanent link to this record



	Author	Bertoni, G.; Grillo, V.; Brescia, R.; Ke, X.; Bals, S.; Catellani, A.; Li, H.; Manna, L.
	Title	Direct determination of polarity, faceting, and core location in colloidal core/shell wurtzite semiconductor nanocrystals			Type	A1 Journal article
	Year	2012	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	6	Issue	7	Pages	6453-6461
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The ability to determine the atomic arrangement and termination of various facets of surfactant-coated nanocrystals is of great importance for understanding their growth mechanism and their surface properties and represents a critical piece of information that can be coupled to other experimental techniques and to calculations. This is especially appealing in the study of nanocrystals that can be grown in strongly anisotropic shapes, for which the relative growth rates of various facets can be influenced under varying reaction conditions. Here we show that in two representative cases of rod-shaped nanocrystals in the wurtzite phase (CdSe(core)/CdS(shell) and ZnSe(core)/ZnS(shell) nanorods) the terminations of the polar facets can be resolved unambiguously by combining advanced electron microscopy techniques, such as aberration-corrected HRTEM with exit wave reconstruction or aberration-corrected HAADF-STEM. The [0001] and [000-1] polar directions of these rods, which grow preferentially along their c-axis, are revealed clearly, with one side consisting of the Cd (or Zn)-terminated (0001) facet and the other side with a pronounced faceting due to Cd (or Zn)-terminated {10-1-1} facets. The lateral faceting of the rods is instead dominated by three nonpolar {10-10} facets. The core buried in the nanostructure can be localized in both the exit wave phase and HAADF-STEM images.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000306673800079	Publication Date	2012-06-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	63	Open Access
	Notes	The authors gratefully acknowledge funding from the European Research Council under grant number 240111 (NANO-ARCH) and the financial support from the Flemish Hercules 3 Programme for large infrastructures. G.B. and V.G. thank E. Rotunno for his help with STEM_CELL and IWFR.			Approved	Most recent IF: 13.942; 2012 IF: 12.062
	Call Number	UA @ lucian @ c:irua:101138			Serial	710
Permanent link to this record



	Author	He, Z.; Ke, X.; Bals, S.; Van Tendeloo, G.
	Title	Direct evidence for the existence of multi-walled carbon nanotubes with hexagonal cross-sections			Type	A1 Journal article
	Year	2012	Publication	Carbon	Abbreviated Journal	Carbon
	Volume	50	Issue	7	Pages	2524-2529
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Carbon nanotubes (CNTs) with a polygonal cross-section have been paid increasing attention since their three-dimensional structure is related to specific physical properties, which are found to be different in comparison to CNTs with a circular cross-section. Here, we report the existence of novel multi-walled CNTs yielding walls with a rounded-hexagonal configuration. This structure was directly confirmed for the first time by both cross-sectional transmission electron microscopy and electron tomography. The morphology of the Fe catalytic particle also exhibits hexagonal characteristics, and is proposed as the origin of the formation of the rounded-hexagonal walls of the CNT. This observation is of great importance with respect to the design of polygonal (such as pentagonal or hexagonal) cross-sectional CNTs. By controlling the morphology of the catalytic nanoparticles it will be possible to grow CNTs with desired electronic and mechanical properties.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000303038400015	Publication Date	2012-02-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0008-6223;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.337	Times cited	8	Open Access
	Notes	Fwo			Approved	Most recent IF: 6.337; 2012 IF: 5.868
	Call Number	UA @ lucian @ c:irua:96956			Serial	711
Permanent link to this record



	Author	Van Aert, S.; Chang, L.Y.; Bals, S.; Kirkland, A.I.; Van Tendeloo, G.
	Title	Effect of amorphous layers on the interpretation of restored exit waves			Type	A1 Journal article
	Year	2009	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	109	Issue	3	Pages	237-246
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The effects of amorphous layers on the quality of exit wave restorations have been investigated. Two independently developed software implementations for exit wave restoration have been used to simulated focal series of images of SrTiO3 with amorphous carbon layers incorporated. The restored exit waves have been compared both qualitatively and quantitatively. We have shown that amorphous layers have a strong impact on the quantitative measurements of atomic column positions, however, the error in the position measurements is still in the picometer range.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000264280200005	Publication Date	2008-11-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	10	Open Access
	Notes	Fwo; Esteem 026019			Approved	Most recent IF: 2.843; 2009 IF: 2.067
	Call Number	UA @ lucian @ c:irua:76421			Serial	796
Permanent link to this record



	Author	Croitoru, M.D.; van Dyck, D.; Van Aert, S.; Bals, S.; Verbeeck, J.
	Title	An efficient way of including thermal diffuse scattering in simulation of scanning transmission electron microscopic images			Type	A1 Journal article
	Year	2006	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	106	Issue	10	Pages	933-940
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT); Vision lab
	Abstract	We propose an improved image simulation procedure for atomic-resolution annular dark-field scanning transmission electron microscopy (STEM) based on the multislice formulation, which takes thermal diffuse scattering fully into account. The improvement with regard to the classical frozen phonon approach is realized by separating the lattice configuration statistics from the dynamical scattering so as to avoid repetitive calculations. As an example, the influence of phonon scattering on the image contrast is calculated and investigated. STEM image simulation of crystals can be applied with reasonable computing times to problems involving a large number of atoms and thick or large supercells.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000240397200006	Publication Date	2006-05-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	18	Open Access
	Notes	Fwo; Fwo-V			Approved	Most recent IF: 2.843; 2006 IF: 1.706
	Call Number	UA @ lucian @ c:irua:87604UA @ admin @ c:irua:87604			Serial	876
Permanent link to this record



	Author	Ustarroz, J.; Gupta, U.; Hubin, A.; Bals, S.; Terryn, H.
	Title	Electrodeposition of Ag nanoparticles onto carbon coated TEM grids : a direct approach to study early stages of nucleation			Type	A1 Journal article
	Year	2010	Publication	Electrochemistry communications	Abbreviated Journal	Electrochem Commun
	Volume	12	Issue	12	Pages	1706-1709
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	An innovative experimental approach to study the electrodeposition of small nanoparticles and the early stages of electrochemical nucleation and growth is presented. Carbon coated gold TEM grids are used as substrates for the electrodeposition of silver nanoparticles so that electrochemical data, FESEM, HAADFSTEM and HRTEM data can be acquired from the same sample without the need to remove the particles from the substrate. It is shown that the real distribution of nanoparticles cannot be resolved by FESEM whereas HAADFSTEM analysis confirms that a distribution of small nanoparticles (d ≈ 12 nm) coexist with large nanoparticles corresponding to a bimodal size distribution. Besides, particles grown under the same conditions have been found to present different structures such as monocrystals, polycrystals or aggregates of smaller particles.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000285904700010	Publication Date	2010-10-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1388-2481;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.396	Times cited	52	Open Access
	Notes	Fwo			Approved	Most recent IF: 4.396; 2010 IF: 4.287
	Call Number	UA @ lucian @ c:irua:87612			Serial	900
Permanent link to this record



	Author	Goris, B.; van den Broek, W.; Batenburg, K.J.; Heidari Mezerji, H.; Bals, S.
	Title	Electron tomography based on a total variation minimization reconstruction technique			Type	A1 Journal article
	Year	2012	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	113	Issue		Pages	120-130
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	The 3D reconstruction of a tilt series for electron tomography is mostly carried out using the weighted backprojection (WBP) algorithm or using one of the iterative algorithms such as the simultaneous iterative reconstruction technique (SIRT). However, it is known that these reconstruction algorithms cannot compensate for the missing wedge. Here, we apply a new reconstruction algorithm for electron tomography, which is based on compressive sensing. This is a field in image processing specialized in finding a sparse solution or a solution with a sparse gradient to a set of ill-posed linear equations. Therefore, it can be applied to electron tomography where the reconstructed objects often have a sparse gradient at the nanoscale. Using a combination of different simulated and experimental datasets, it is shown that missing wedge artefacts are reduced in the final reconstruction. Moreover, it seems that the reconstructed datasets have a higher fidelity and are easier to segment in comparison to reconstructions obtained by more conventional iterative algorithms.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000300554400006	Publication Date	2011-11-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	171	Open Access
	Notes	Fwo			Approved	Most recent IF: 2.843; 2012 IF: 2.470
	Call Number	UA @ lucian @ c:irua:93637			Serial	987
Permanent link to this record



	Author	Verbeeck, J.; Bals, S.; Lamoen, D.; Luysberg, M.; Huijben, M.; Rijnders, G.; Brinkman, A.; Hilgenkamp, H.; Blank, D.H.A.; Van Tendeloo, G.
	Title	Electronic reconstruction at n-type SrTiO₃/LaAlO₃ interfaces			Type	A1 Journal article
	Year	2010	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	81	Issue	8	Pages	085113,1-085113,6
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Electron-energy-loss spectroscopy (EELS) is used to investigate single layers of LaAlO3 grown on SrTiO3 having an n-type interface as well as multilayers of LaAlO3 and SrTiO3 in which both n- and p-type interfaces occur. Only minor changes in Ti valence at the n-type interface are observed. This finding seems to contradict earlier experiments for other SrTiO3/LaAlO3 systems where large deviations in Ti valency were assumed to be responsible for the conductivity of these interfaces. Ab initio calculations have been carried out in order to interpret our EELS results. Using the concept of Bader charges, it is demonstrated that the so-called polar discontinuity is mainly resolved by lattice distortions and to a far lesser extent by changes in valency for both single layer and multilayer geometries.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000275053300040	Publication Date	2010-02-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	25	Open Access
	Notes	Esteem 026019; Fwo			Approved	Most recent IF: 3.836; 2010 IF: 3.774
	Call Number	UA @ lucian @ c:irua:81768UA @ admin @ c:irua:81768			Serial	1005
Permanent link to this record



	Author	Figuerola, A.; Franchini, I.R.; Fiore, A.; Mastria, R.; Falqui, A.; Bertoni, G.; Bals, S.; Van Tendeloo, G.; Kudera, S.; Cingolani, R.; Manna, L.
	Title	End-to-end assembly of shape-controlled nanocrystals via a nanowelding approach mediated by gold domains			Type	A1 Journal article
	Year	2009	Publication	Advanced materials	Abbreviated Journal	Adv Mater
	Volume	21	Issue	5	Pages	550-554
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Welding nanocrystals for assembly: The welding of Au domains grown on the tips of shape-controlled cadmium chalcogenide colloidal nanocrystals is used as a strategy for their assembly. Iodine-induced coagulation of selectively grown Au domains leads to assemblies such as flowerlike structures based on bullet-shaped nanocrystals, linear and cross-linked chains of nanorods, and globular networks with tetrapods as building blocks.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000263371800005	Publication Date	2008-11-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0935-9648;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	19.791	Times cited	110	Open Access
	Notes	Esteem 026019; Fwo			Approved	Most recent IF: 19.791; 2009 IF: 8.379
	Call Number	UA @ lucian @ c:irua:75960			Serial	1037
Permanent link to this record