NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	1–30 of 269 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 >>

List View

Citations

Details

	Records
	Author	Meulebroeck, W.; Baert, K.; Wouters, H.; Cosyns, P.; Ceglia, A.; Cagno, S.; Janssens, K.; Nys, K.; Terryn, H.; Thienpont, H.
	Title	The identification of chromophores in ancient glass by the use of UV-VIS-NIR spectroscopy			Type	A1 Journal article
	Year	2010	Publication	Proceedings of the Society of Photo-optical Instrumentation Engineers	Abbreviated Journal
	Volume	7726	Issue		Pages	77260d-12
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	In this publication optical spectroscopy is considered to be a supplementary technique to study ancient colored glass. It results from a systematic study of the UV-VIS-NIR transmission spectra of intentionally colored glass fragments from various archaeological and historical sites and dated from the Roman period to the 21th century AD. The main goal consists of defining optical sensing parameters for this type of material. The considered colorants are iron, cobalt, manganese, copper and chromium. It is proved that many cases exist where optical spectroscopy can be seen as a straightforward, non-destructive, low-cost and in-situ applicable technique in identifying authentic material or to obtain information about the origin of the material. Possible sensing parameters are defined as the absence/presence of absorption bands characteristic for a specific coloring metal oxide and the spectral position of these bands. These parameters could reveal information about the applied furnace conditions and/or to the composition of the glass matrix. It is shown that the cobalt absorption band situated around 535 nm for soda rich glasses (Roman and industrial times) is shifted towards 526 nm for potash rich glasses (medieval and post-medieval times).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000285287900011	Publication Date	2010-04-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0277-786x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	10	Open Access
	Notes	; ;			Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:111316			Serial	5650
Permanent link to this record



	Author	Meilikhov, M.; Yusenko, K.; Esken, D.; Turner, S.; Van Tendeloo, G.; Fischer, R.A.
	Title	Metals@MOFs – loading MOFs with metal nanoparticles for hybrid functions			Type	A1 Journal article
	Year	2010	Publication	European journal of inorganic chemistry	Abbreviated Journal	Eur J Inorg Chem
	Volume	2010	Issue	24	Pages	3701-3714
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Metalorganic frameworks (MOFs) as well as porous coordination polymers (PCPs) are porous, organicinorganic hybrid solids with zeolite-like structures and properties. Due to their extraordinarily high surface area and well defined pore structure MOFs can be used for the stabilization of metal nanoparticles with adjustable size. The embedded metal nanoparticles are still accessible for other reagents due to the high porosity of the MOF systems. This fact makes metal@MOF systems especially interesting for heterogeneous catalysis, gas storage and chemical sensing. This review compiles the cases of metal nanoparticles supported by or embedded into MOFs reported so far and the main aspects and problems associated with these novel nanocomposite systems. The determination of the dispersion and the location of the particles at the MOF support, the control of the loading degree and its effect on the catalytic activity of the system are discussed as well as the partial degradation of the MOF structure upon particle formation. Examples of the introduction of stabilizing groups into the MOF network that direct the loading and can influence the size and shape of the embedded particles are still rare and point into the possible direction of future investigations. Finally, the formation of bimetallic nanoparticles, which are stabilized and supported by a MOF network, will also be reviewed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000281684300001	Publication Date	2010-07-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1434-1948;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.444	Times cited	366	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 2.444; 2010 IF: 2.910
	Call Number	UA @ lucian @ c:irua:85495			Serial	2014
Permanent link to this record



	Author	Wendelen, W.; Autrique, D.; Bogaerts, A.
	Title	Space charge limited electron emission from a Cu surface under ultrashort pulsed laser irradiation			Type	A1 Journal article
	Year	2010	Publication	AIP conference proceedings	Abbreviated Journal
	Volume	1278	Issue		Pages	407-415
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this theoretical study, the electron emission from a copper surface under ultrashort pulsed laser irradiation is investigated using a one dimensional particle in cell model. Thermionic emission as well as multi-photon photoelectron emission were taken into account. The emitted electrons create a negative space charge above the target, consequently the generated electric field reduces the electron emission by several orders of magnitude. The simulations indicate that the space charge effect should be considered when investigating electron emission related phenomena in materials under ultrashort pulsed laser irradiation of metals.the word abstract, but do replace the rest of this text. ©2010 American Institute of Physics
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000287183900042	Publication Date	2010-10-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:88899			Serial	3058
Permanent link to this record



	Author	Worobiec, A.; Potgieter-Vermaak, S.; Darchuk, L.; Vishnyakov, V.; Potgieter, H.; Van Grieken, R.
	Title	Behavior of semi-volatile particles under a laser and electron beam: influence on the quality of analytical results			Type	A1 Journal article
	Year	2010	Publication	AIP conference proceedings	Abbreviated Journal
	Volume	1267	Issue		Pages	523-524
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation); Laboratory Experimental Medicine and Pediatrics (LEMP)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000281210900279	Publication Date	2010-08-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0094-243x	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:84573			Serial	7553
Permanent link to this record



	Author	Darchuk, L.; Worobiec, A.; Khan, V.; Krasnov, V.; Van Grieken, R.
	Title	Composition of aerosols from the shelter of the Chernobyl power plant			Type	A1 Journal article
	Year	2010	Publication	AIP conference proceedings	Abbreviated Journal
	Volume	1267	Issue		Pages	512-513
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation); Laboratory Experimental Medicine and Pediatrics (LEMP)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000281210900273	Publication Date	2010-08-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0094-243x	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:84572			Serial	7705
Permanent link to this record



	Author	Payette, C.; Austing, D.G.; Yu, G.; Gupta, J.A.; Nair, S.V.; Partoens, B.; Amaha, S.; Tarucha, S.
	Title	Branch current behavior at two level anti-crossings in vertical quantum dot single-particle spectra			Type	A1 Journal article
	Year	2010	Publication	AIP conference proceedings	Abbreviated Journal
	Volume	1199	Issue		Pages	271-272
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We study single-electron-elastic-resonant-tunneling through two weakly coupled vertical quantum dots and investigate the branch current behavior at anti-crossings between two single-particle energy levels in the constituent dot spectra that are induced to approach each other by application of an out-of-dot-plane magnetic field. We observe both the familiar case of monotonic transfer of the resonant current strengths between the two branches as well as the less familiar case of concurrent enhancement and suppression (ideally complete cancellation) of the resonant current in the two branches. These two situations can be explained in terms of a simple coherent tunneling model. ©2009 American Institute of Physics
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000281590800127	Publication Date	2010-01-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:86923			Serial	254
Permanent link to this record



	Author	Razdobarin, A.G.; Mukhin, E.E.; Semenov, V.V.; Yu.Tolstyakov, S.; Kochergin, M.M.; Kurskiev, G.S.; Podushnikova, K.A.; Kirilenko, D.A.; Sitnikova, A.A.; Gorodetsky, А.Е.; Bukhovets, V.L.; Zalavutdinov, R.K.; Zakharov, А.P.; Arkhipov, I.I.; Voitsenya, V.S.; Bondarenko, V.N.; Konovalov, V.G.; Ryzhkov, I.V.;
	Title	High reflective mirrors for in-vessel applications in ITER			Type	A1 Journal article
	Year	2010	Publication	Nuclear instruments and methods in physics research : A: accelerators, spectrometers, detectors and associated equipment	Abbreviated Journal	Nucl Instrum Meth A
	Volume	623	Issue	2	Pages	809-811
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The structure and surface morphology of aluminum and silver mirrors covered with protective dielectric oxide layer were studied by means of TEM and SEM. The presence of needle-like pores throughout the thickness of the ZrO(2) film and bubble-like pores in Al(2)O(3) was observed. The test for resistivity to deuterium ion bombardment shows that the exposition to a fluence of similar to 2 x 10(20) ions/cm(2) with the ion energy of 40-50 eV results in appearance of blisters on the surface of mirrors covered wit h Al(2)O(3). For the mirrors protected with ZrO(2) no noticeable changes in surface morphology and reflectivity were found even after order of magnitude higher ion fluence. The effect of different porous structures on blistering phenomena is discussed. (C) 2010 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher	Elsevier Science	Place of Publication	Amsterdam	Editor
	Language		Wos	000284343600041	Publication Date	2010-04-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0168-9002;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.362	Times cited	4	Open Access
	Notes				Approved	Most recent IF: 1.362; 2010 IF: 1.142
	Call Number	UA @ lucian @ c:irua:95545			Serial	1442
Permanent link to this record



	Author	Tirry, W.; Coghe, F.; Bouvier, S.; Gasperini, M.; Rabet, L.; Schryvers, D.
	Title	A multi-scale characterization of deformation twins in Ti6Al4V sheet material deformed by simple shear			Type	A1 Journal article
	Year	2010	Publication	Materials science and engineering: part A: structural materials: properties, microstructure and processing	Abbreviated Journal	Mat Sci Eng A-Struct
	Volume	527	Issue	16/17	Pages	4136-4145
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Ti6Al4V sheet material is subjected to simple shear deformation with strain ratio's of 10%, 30% and 50%. Optical microscopy, transmission electron microscopy and electron backscatter diffraction techniques are applied to study the presence and morphology of deformation twins. Only the View the MathML source type of twins seems to be present with a volume fraction below 1%. These View the MathML source twins show a high density of basal stacking faults of the ABABACAC type identified using atomic resolution transmission electron microscopy. A resolved shear stress analysis shows that twins most often occur on those planes with the highest resolved shear stresses, but that the starting texture is not beneficial for the occurrence of twins. It is further suggested that a transitory strain hardening regime observed around 530 MPa might be related with the onset of twinning.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000278766800068	Publication Date	2010-03-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-5093;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.094	Times cited	20	Open Access
	Notes	Iap			Approved	Most recent IF: 3.094; 2010 IF: 2.101
	Call Number	UA @ lucian @ c:irua:82291			Serial	2212
Permanent link to this record



	Author	Neyts, E.; Shibuta, Y.; Bogaerts, A.
	Title	Bond switching regimes in nickel and nickel-carbon nanoclusters			Type	A1 Journal article
	Year	2010	Publication	Chemical physics letters	Abbreviated Journal	Chem Phys Lett
	Volume	488	Issue	4/6	Pages	202-205
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Understanding the fundamental dynamics in carbon nanotube (CNT) catalysts is of primary importance to understand CNT nucleation. This Letter reports on calculated bond switching (BS) rates in pure and carbon containing nickel nanoclusters. The rates are analyzed in terms of their temperature dependent spatial distribution and the mobility of the cluster atoms. The BS mechanism is found to change from vibrational to diffusional at around 900 K, with a corresponding strong increase in activation energy. Furthermore, the BS activation energy is observed to decrease as the carbon content in the cluster increases, resulting in an effective liquification of the cluster.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000275751900020	Publication Date	2010-02-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0009-2614;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.815	Times cited	20	Open Access
	Notes				Approved	Most recent IF: 1.815; 2010 IF: 2.282
	Call Number	UA @ lucian @ c:irua:80998			Serial	248
Permanent link to this record



	Author	Georgieva, V.; Todorov, I.T.; Bogaerts, A.
	Title	Molecular dynamics simulation of oxide thin film growth: importance of the inter-atomic interaction potential			Type	A1 Journal article
	Year	2010	Publication	Chemical physics letters	Abbreviated Journal	Chem Phys Lett
	Volume	485	Issue	4/6	Pages	315-319
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A molecular dynamics (MD) study of MgxAlyOz thin films grown by magnetron sputtering is presented using an ionic model and comparing two potential sets with formal and partial charges. The applicability of the model and the reliability of the potential sets for the simulation of thin film growth are discussed. The formal charge potential set was found to reproduce the thin film structure in close agreement with the structure of the experimentally grown thin films. Graphical abstract A molecular dynamics study of growth of MgxAlyOz thin films is presented using an ionic model and comparing two potential sets with formal and partial charges. The simulation results with the formal charge potential set showed a transition in the film from a crystalline to an amorphous structure, when the Mg metal content decreases below 50% in very close agreement with the structure of the experimentally deposited films.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000273782600010	Publication Date	2010-01-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0009-2614;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.815	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 1.815; 2010 IF: 2.282
	Call Number	UA @ lucian @ c:irua:80023			Serial	2170
Permanent link to this record



	Author	Connolly, M.R.; Bemding, S.J.; Milošević, M.V.; Clem, J.R.; Tamegai, T.
	Title	Continuum versus discrete flux behaviour in large mesoscopic Bi₂Sr₂CaCu₂O_8+\delta disks			Type	A1 Journal article
	Year	2010	Publication	Physica: C : superconductivity	Abbreviated Journal	Physica C
	Volume	470	Issue	S:1	Pages	S896-S897
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We have used scanning Hall probe and local Hall magnetometry measurements to map flux profiles in superconducting Bi2Sr2CaCu2O8+δ disks whose diameters span the crossover between the bulk and mesoscopic vortex regimes. The behaviour of large disks (greater-or-equal, slanted20 μm diameter) is well described by analytic models that assume a continuous distribution of flux in the sample. Small disks (less-than-or-equals, slant10 μm diameter), on the other hand, exhibit clear signatures of the underlying discrete vortex structure as well as competition between triangular Abrikosov ordering and the formation of shell structures driven by interactions with circulating edge currents. At low fields we are able to directly observe the characteristic mesoscopic compression of vortex clusters which is linked to oscillations in the diameter of the vortex dome in increasing magnetic fields. At higher fields, where single vortex resolution is lost, we are still able to track configurational changes in the vortex patterns, since competing vortex orders impose unmistakable signatures on local magnetisation curves. Our observations are in excellent agreement with molecular-dynamics numerical simulations which lead us to a natural definition of the lengthscale for the crossover between discrete and continuum behaviour in our system.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000286075700384	Publication Date	2009-11-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-4534;	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	1.404	Times cited		Open Access
	Notes	; ;			Approved	Most recent IF: 1.404; 2010 IF: 1.415
	Call Number	UA @ lucian @ c:irua:88069			Serial	494
Permanent link to this record



	Author	Berdiyorov, G.R.; Milošević, M.V.; Peeters, F.M.
	Title	Dynamics of kinematic vortices in a mesoscopic superconducting loop			Type	A1 Journal article
	Year	2010	Publication	Physica: C : superconductivity	Abbreviated Journal	Physica C
	Volume	470	Issue	19	Pages	946-948
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Using the time-dependent GinzburgLandau formalism, we study the dynamic properties of a submicron superconducting loop in applied current and in presence of a perpendicular magnetic field. The resistive state of the sample is caused by the motion of kinematic vortexantivortex pairs. Vortices and antivortices move in opposite directions to each other, perpendicularly to the applied drive, and the periodic creation and annihilation of such pairs results in periodic oscillations of the voltage across the sample. The dynamics of these kinematic pairs is strongly influenced by the applied magnetic field, which for high fields leads to the flow of just vortices. Kinematic vortices can be temporarily pinned inside the loop with observable trace in the voltage vs. time characteristics.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000282454400061	Publication Date	2010-03-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-4534;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.404	Times cited	9	Open Access
	Notes	; ;			Approved	Most recent IF: 1.404; 2010 IF: 1.415
	Call Number	UA @ lucian @ c:irua:85039			Serial	777
Permanent link to this record



	Author	Silhanek, A.V.; Kramer, R.G.B.; van de Vondel, J.; Moshchalkov, V.V.; Milošević, M.V.; Berdiyorov, G.R.; Peeters, F.M.; Luccas, R.F.; Puig, T.
	Title	Freezing vortex rivers			Type	A1 Journal article
	Year	2010	Publication	Physica: C : superconductivity	Abbreviated Journal	Physica C
	Volume	470	Issue	19	Pages	726-729
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We demonstrate experimentally and theoretically that the dissipative state at high current densities of superconducting samples with a periodic array of holes consist of flux rivers resulting from a short range attractive interaction between vortices. This dynamically induced vortexvortex attraction results from the migration of quasiparticles out of the vortex core. We have directly visualized the formation of vortex chains by scanning Hall microscopy after freezing the dynamic state by a field cooling procedure at constant bias current. Similar experiments carried out in a sample without holes show no hint of flux river formation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000282454400004	Publication Date	2010-03-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-4534;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.404	Times cited	4	Open Access
	Notes	; ;			Approved	Most recent IF: 1.404; 2010 IF: 1.415
	Call Number	UA @ lucian @ c:irua:85032			Serial	1278
Permanent link to this record



	Author	Milošević, M.V.; Geurts, R.
	Title	The Ginzburg-Landau theory in application			Type	A1 Journal article
	Year	2010	Publication	Physica: C : superconductivity	Abbreviated Journal	Physica C
	Volume	470	Issue	19	Pages	791-795
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	A numerical approach to GinzburgLandau (GL) theory is demonstrated and we review its applications to several examples of current interest in the research on superconductivity. This analysis also shows the applicability of the two-dimensional approach to thin superconductors and the re-defined effective GL parameter κ. For two-gap superconductors, the conveniently written GL equations directly show that the magnetic behavior of the sample depends not just on the GL parameter of two bands, but also on the ratio of respective coherence lengths.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000282454400020	Publication Date	2010-02-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-4534;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.404	Times cited	66	Open Access
	Notes	; ;			Approved	Most recent IF: 1.404; 2010 IF: 1.415
	Call Number	UA @ lucian @ c:irua:85033			Serial	3583
Permanent link to this record



	Author	Misko, V.R.; Lin, N.S.; Peeters, F.M.
	Title	Unconventional dynamics of vortex shells in mesoscopic superconducting corbino disks			Type	A1 Journal article
	Year	2010	Publication	Physica: C : superconductivity	Abbreviated Journal	Physica C
	Volume	470	Issue	19	Pages	939-941
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	The dynamics of vortex matter in mesoscopic superconducting Corbino disk is strongly influenced by the discrete vortex structure arranged in shells. While in previous works the vortex dynamics has been studied in large (macroscopic) and in very small mesoscopic disks (containing only few shells), in the intermediate-size regime it is much more complex and unusual, due to: (i) the competition between the vortexvortex interaction and confinement and (ii) (in)commensurability among the vortex shells. We found that the interplay between these effects can result in a very unusual vortex dynamical behavior: (i) unconventional angular melting (i.e., propagating from the boundary, where the shear stress is minimum, towards the center) and (ii) unconventional dynamics of shells (i.e., the inversion of shell velocities with respect to the gradient driving force). This unusual behavior is found for different number of shells.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000282454400059	Publication Date	2010-03-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-4534;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.404	Times cited	3	Open Access
	Notes	; ;			Approved	Most recent IF: 1.404; 2010 IF: 1.415
	Call Number	UA @ lucian @ c:irua:85036			Serial	3799
Permanent link to this record



	Author	Romaguera, A.R. de C.; Doria, M.M.; Peeters, F.M.
	Title	Vortex patterns in a superconducting-ferromagnetic rod			Type	A1 Journal article
	Year	2010	Publication	Physica: C : superconductivity	Abbreviated Journal	Physica C
	Volume	470	Issue	19	Pages	871-873
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	A superconducting rod with a magnetic moment on top develops vortices obtained here through 3D calculations of the GinzburgLandau theory. The inhomogeneity of the applied field brings new properties to the vortex patterns that vary according to the rod thickness. We find that for thin rods (disks) the vortex patterns are similar to those obtained in presence of a homogeneous magnetic field instead because they consist of giant vortex states. For thick rods novel patterns are obtained as vortices are curve lines in space that exit through the lateral surface.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000282454400039	Publication Date	2010-03-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-4534;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.404	Times cited	1	Open Access
	Notes	; ;			Approved	Most recent IF: 1.404; 2010 IF: 1.415
	Call Number	UA @ lucian @ c:irua:85035			Serial	3878
Permanent link to this record



	Author	Verbeeck, J.; Tian, H.; Schattschneider, P.
	Title	Production and application of electron vortex beams			Type	A1 Journal article
	Year	2010	Publication	Nature	Abbreviated Journal	Nature
	Volume	467	Issue	7313	Pages	301-304
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Vortex beams (also known as beams with a phase singularity) consist of spiralling wavefronts that give rise to angular momentum around the propagation direction. Vortex photon beams are widely used in applications such as optical tweezers to manipulate micrometre-sized particles and in micro-motors to provide angular momentum1, 2, improving channel capacity in optical3 and radio-wave4 information transfer, astrophysics5 and so on6. Very recently, an experimental realization of vortex beams formed of electrons was demonstrated7. Here we describe the creation of vortex electron beams, making use of a versatile holographic reconstruction technique in a transmission electron microscope. This technique is a reproducible method of creating vortex electron beams in a conventional electron microscope. We demonstrate how they may be used in electron energy-loss spectroscopy to detect the magnetic state of materials and describe their properties. Our results show that electron vortex beams hold promise for new applications, in particular for analysing and manipulating nanomaterials, and can be easily produced.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000281824900033	Publication Date	2010-09-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0028-0836;1476-4687;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	40.137	Times cited	626	Open Access
	Notes	Esteem 026019; Fwo			Approved	Most recent IF: 40.137; 2010 IF: 36.104
	Call Number	UA @ lucian @ c:irua:84878UA @ admin @ c:irua:84878			Serial	2720
Permanent link to this record



	Author	Swaenen, M.; Stefaniak, E.A.; Frost, R.; Worobiec, A.; Van Grieken, R.
	Title	Investigation of inclusions trapped inside Libyan desert glass by Raman microscopy			Type	A1 Journal article
	Year	2010	Publication	Analytical and bioanalytical chemistry	Abbreviated Journal
	Volume	397	Issue	7	Pages	2659-2665
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation); Laboratory Experimental Medicine and Pediatrics (LEMP)
	Abstract	Several specimens of Libyan desert glass (LDG), an enigmatic natural glass from Egypt, were subjected to investigation by micro-Raman spectroscopy. The spectra of inclusions inside the LDG samples were successfully measured through the layers of glass and the mineral species were identified on this basis. The presence of cristobalite as typical for high-temperature melt products was confirmed, together with co-existing quartz. TiO2 was determined in two polymorphic species rutile and anatase. Micro-Raman spectroscopy proved also the presence of minerals unusual for high-temperature glasses such as anhydrite and aragonite.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000280122100004	Publication Date	2010-01-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1618-2642; 1618-2650	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:83276			Serial	8125
Permanent link to this record



	Author	Lorenz, H.; Zhao, Q.; Turner, S.; Lebedev, O.I.; Van Tendeloo, G.; Kloetzer, B.; Rameshan, C.; Pfaller, K.
	Title	Origin of different deactivation of Pd/SnO₂ and Pd/GeO₂ catalysts in methanol dehydrogenation and reforming: a comparative study			Type	A1 Journal article
	Year	2010	Publication	Applied catalysis : A : general	Abbreviated Journal	Appl Catal A-Gen
	Volume	381	Issue	1/2	Pages	242-252
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Pd particles supported on SnO2 and GeO2 have been structurally investigated by X-ray diffraction, (High-Resolution) transmission and scanning electron microscopy after different reductive treatments to monitor the eventual formation of bimetallic phases and catalytically tested in methanol dehydrogenation/ reforming. For both oxides this included a thin film sample with well-defined Pd particles and a powder catalyst prepared by incipient wetness impregnation. The hexagonal and the tetragonal polymorph were studied for powder GeO2. Pd2Ge formation was observed on all GeO2-supported catalysts, strongly depending on the specific sample used. Reduction of the thin film at 573K resulted in full transformation into the bimetallic state. The partial solubility of hexagonal GeO2 in water and its thermal structural instability yielded Pd2Ge formation at 473 K, at the cost of a structurally inhomogeneous support and Ge metal formation at higher reduction temperatures. Pd on tetragonal GeO2 entered a state of strong metalsupport interaction after reduction at 573673 K, resulting in coalescing Pd2Ge particles on a sintered and re-crystallized support, apparently partially covering the bimetallic particles and decreasing the catalytic activity. Pd2Ge on amorphous thin film and hexagonal GeO2 converted methanol primarily via dehydrogenation to CO and H2. At 573 K, formation of Pd2Sn and also PdSn occurred on the Pd/SnO2 thin film. Pd3Sn2 (and to some extent Pd2Sn) were predominantly obtained on the respective powder catalyst. Strong deactivation with increasing reduction temperature was observed, likely not based on the classical strong metalsupport interaction effect, but rather on a combination of missing active structural ensembles on Sn-enriched bimetallic phases and the formation of metallic -Sn. Correlations to Pd and its bimetallics supported on ZnO, Ga2O3 and In2O3 were also discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000279100700029	Publication Date	2010-04-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-860X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.339	Times cited	14	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 4.339; 2010 IF: 3.384
	Call Number	UA @ lucian @ c:irua:83927			Serial	2522
Permanent link to this record



	Author	Zhao, Q.; Lorenz, H.; Turner, S.; Lebedev, O.I.; Van Tendeloo, G.; Rameshan, C.; Klötzer, B.; Konzett, J.; Penner, S.
	Title	Catalytic characterization of pure SnO₂ and GeO₂ in methanol steam reforming			Type	A1 Journal article
	Year	2010	Publication	Applied catalysis : A : general	Abbreviated Journal	Appl Catal A-Gen
	Volume	375	Issue	2	Pages	188-195
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Structural changes of a variety of different SnO, SnO2 and GeO2 catalysts upon reduction in hydrogen were correlated with associated catalytic changes in methanol steam reforming. Studied systems include SnO, SnO2 and GeO2 thin film model catalysts prepared by vapour phase deposition and growth on polycrystalline NaCl surfaces and, for comparison, the corresponding pure oxide powder catalysts. Reduction of both the SnO2 thin film and powder at around 673 K in 1 bar hydrogen leads to a substantial reduction of the bulk structure and yields a mixture of SnO2 and metallic β-Sn. On the powder catalyst this transformation is fully reversible upon oxidation in 1 bar O2 at 673 K. Strongly reduced thin films, however, can only be re-transformed to SnO2 if the reduction temperature did not exceed 573 K. For GeO2, the situation is more complex due to its polymorphism. Whereas the tetragonal phase is structurally stable during reduction, oxidation or catalytic reaction, a small part of the hexagonal phase is always transformed into the tetragonal at 673 K independent of the gas phase used. SnO2 is highly active and CO2 selective in methanol steam reforming, but the initial high activity drops considerably upon reduction between 373 and 573 K and almost complete catalyst deactivation is observed after reduction at 673 K, which is associated with the parallel formation of β-Sn. In close correlation to the structural results, the catalytic activity and selectivity can be restored upon an oxidative catalyst regeneration at 673 K. Tetragonal GeO2 exhibits only a small activity and no pronounced selectivity to either CO or CO2, at least after reduction. In its fully oxidized state release of surface/lattice oxygen results in a non-catalytic formation of CO2 by oxidation of CO originating from catalytic dehydrogenation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000275580600002	Publication Date	2010-01-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-860X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.339	Times cited	20	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 4.339; 2010 IF: 3.384
	Call Number	UA @ lucian @ c:irua:81741			Serial	292
Permanent link to this record



	Author	Lorenz, H.; Turner, S.; Lebedev, O.I.; Van Tendeloo, G.; Klötzer, B.; Rameshan, C.; Pfaller, K.; Penner, S.
	Title	Pd-In₂O₃ interaction due to reduction in hydrogen: consequences for methanol steam reforming			Type	A1 Journal article
	Year	2010	Publication	Applied catalysis : A : general	Abbreviated Journal	Appl Catal A-Gen
	Volume	374	Issue	1/2	Pages	180-188
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Two different Pd/In2O3 samples including a thin film model catalyst with well-defined Pd particles grown on NaCl(0 0 1) supports and a powder catalyst prepared by an impregnation technique are examined by electron microscopy, X-ray diffraction and catalytic measurements in methanol steam reforming in order to correlate the formation of different oxide-supported bimetallic PdIn phases with catalytic activity and selectivity. A PdIn shell around the Pd particles is observed on the thin film catalyst after embedding the Pd particles in In2O3 at 300 K, likely because alloying to PdIn and oxidation to In2O3 are competing processes. Increased PdIn bimetallic formation is observed up to 573 K reduction temperature until at 623 K the film stability limit in hydrogen is reached. Oxidative treatments at 573 K lead to decomposition of PdIn and to the formation of an In2O3 shell covering the Pd particles, which irreversibly changes the activity and selectivity pattern to clean In2O3. PdIn and Pd2In3 phases are obtained on the powder catalyst after reduction at 573 K and 673 K, respectively. Only CO2-selective methanol steam reforming is observed in the reduction temperature range between 473 K and 573 K. After reduction at 673 K encapsulation of the bimetallic particles by crystalline In2O3 suppresses CO2 formation and only activity and selectivity of clean In2O3 are measured.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000274869900023	Publication Date	2009-12-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-860X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.339	Times cited	55	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 4.339; 2010 IF: 3.384
	Call Number	UA @ lucian @ c:irua:81801			Serial	3553
Permanent link to this record



	Author	Barbier, M.; Vasilopoulos, P.; Peeters, F.M.
	Title	Single-layer and bilayer graphene superlattices: collimation, additional Dirac points and Dirac lines			Type	A1 Journal article
	Year	2010	Publication	Philosophical transactions of the Royal Society : mathematical, physical and engineering sciences	Abbreviated Journal	Philos T R Soc A
	Volume	368	Issue	1932	Pages	5499-5524
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We review the energy spectrum and transport properties of several types of one-dimensional superlattices (SLs) on single-layer and bilayer graphene. In single-layer graphene, for certain SL parameters an electron beam incident on an SL is highly collimated. On the other hand, there are extra Dirac points generated for other SL parameters. Using rectangular barriers allows us to find analytical expressions for the location of new Dirac points in the spectrum and for the renormalization of the electron velocities. The influence of these extra Dirac points on the conductivity is investigated. In the limit of δ-function barriers, the transmission T through and conductance G of a finite number of barriers as well as the energy spectra of SLs are periodic functions of the dimensionless strength P of the barriers, Graphic, with vF the Fermi velocity. For a KronigPenney SL with alternating sign of the height of the barriers, the Dirac point becomes a Dirac line for P = π/2+nπ with n an integer. In bilayer graphene, with an appropriate bias applied to the barriers and wells, we show that several new types of SLs are produced and two of them are similar to type I and type II semiconductor SLs. Similar to single-layer graphene SLs, extra Dirac points are found in bilayer graphene SLs. Non-ballistic transport is also considered.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000283660000011	Publication Date	2010-11-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1364-503X;1471-2962;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.97	Times cited	64	Open Access
	Notes	; This work was supported by IMEC, the Flemish Science Foundation (FWO-Vl), the Belgian Science Policy (IAP) and the Canadian NSERC through grant no. OGP0121756. ;			Approved	Most recent IF: 2.97; 2010 IF: 2.459
	Call Number	UA @ lucian @ c:irua:85597			Serial	3023
Permanent link to this record



	Author	Jain, R.; Yadav, R.K.; Rather, J.A.
	Title	Voltammetric assay of anti-vertigo drug betahistine hydrochloride in sodium lauryl sulphate			Type	A1 Journal article
	Year	2010	Publication	Colloids and surfaces: A: physicochemical and engineering aspects	Abbreviated Journal
	Volume	366	Issue		Pages	63-67
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	Assay and electrochemical behaviour of betahistine hydrochloride in BrittonRobinsons (BR) buffer of pH range 2.512.0 at a glassy carbon electrode have been investigated. Addition of anionic surfactant (sodium lauryl sulphate) to the betahistine hydrochloride solution containing electrolyte enhanced the reduction current signal while neutral surfactant (Tween-20) and cationic surfactant cetyl trimethylammonium bromide (CTAB) showed an opposite effect. Voltammograms of betahistine hydrochloride exhibited a single wave. Based on reduction behaviour of betahistine hydrochloride, a direct square-wave voltammetric method has been developed for the assay of betahistine hydrochloride in pharmaceutical formulation. The proposed method has been validated as per ICH guideline. System and method precision in terms of RSD were 1.88% and 1.60% respectively, whereas the method accuracy was indicated by the recovery of 97.6101.9%. Reduction peak current was linear over the target concentration with correlation coefficient 0.998. The proposed method was successfully applied to the determination of betahistine hydrochloride in pharmaceutical formulation. The results were compared with those obtained by the reference high performance liquid chromatographic method. No significant differences were found between results of proposed and reference methods.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000280501800010	Publication Date	2010-05-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0927-7757	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:98689			Serial	8741
Permanent link to this record



	Author	Buysse, C.; Kovalevsky, A.; Snijkers, F.; Buekenhoudt, A.; Mullens, S.; Luyten, J.; Kretzschmar, J.; Lenaerts, S.
	Title	Fabrication and oxygen permeability of gastight, macrovoid-free Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-\delta capillaries for high temperature gas separation			Type	A1 Journal article
	Year	2010	Publication	Journal of membrane science	Abbreviated Journal	J Membrane Sci
	Volume	359	Issue	1-2	Pages	86-92
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Oxygen-permeable perovskites with mixed ionic-electronic conducting properties can play an important role in the separation of oxygen from air which is needed in the oxy-fuel and pre-combustion technologies for the removal and capture of CO2. In this work, gastight, macrovoid-free Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) capillaries were successfully shaped by a phase-inversion spinning technique, followed by calcination and sintering. It was found that both the rheology of the ceramic suspension and the composition of bore liquid and coagulation bath are key factors for making macrovoid-free green capillaries. Gastight BSCF capillaries were obtained by sintering for 5 h at 1100 °C. The sintered BSCF capillaries contained a significant amount of BaSO4 due to a reaction with the polysulfone binder during calcination. The oxygen permeation flux through the BSCF capillaries was measured and compared to literature data on BSCF disk and hollow fiber membranes measured in similar conditions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000279953300010	Publication Date	2009-10-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0376-7388	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.035	Times cited	38	Open Access
	Notes	; The authors want to express their thanks to the VITO personnel for their continuous support, especially B. Molenberghs, W. Doyen, H. Beckers (Separation and Conversion Technology, VITO), R. Kemps, M. Mertens, I. Thijs, M. Schoeters, W. Bouwen and J. Cooymans (Materials Department, VITO). C. Buysse thankfully acknowledges a PhD scholarship provided by VITO and the University of Antwerp. This work is performed in the framework of the German Helmholtz Alliance Project “MEM-BRAIN”, aiming at the development of gas separation membranes for zero-emission fossil fuel power plants. ;			Approved	Most recent IF: 6.035; 2010 IF: 3.673
	Call Number	UA @ admin @ c:irua:82008			Serial	5950
Permanent link to this record



	Author	Li, Y.; Yang, X.-Y.; Rooke, J.; Van Tendeloo, G.; Su, B.-L.
	Title	Ultralong Cu(OH)(2) and CuO nanowire bundles: PEG200-directed crystal growth for enhanced photocatalytic performance			Type	A1 Journal article
	Year	2010	Publication	Journal of colloid and interface science	Abbreviated Journal	J Colloid Interf Sci
	Volume	348	Issue	2	Pages	303-312
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Ultralong Cu(OH)(2) and CuO nanowire bundles with lengths ranging from tens to hundreds of micrometers have been selectively synthesized on a large scale by a facile solution-phase method, using PEG200 as growth-directing agent. The growth mechanisms were investigated by monitoring the nanowire evolution process. The results showed that under the action of PEG200 molecules, the Cu(OH)(2) and CuO nanowires were first formed through oriented attachment of colloidal particles, then through side self-assembly leading to nanowire bundles, and finally to CuO nanoleaves. PEG200 plays a critical role in the synthesis of nanowires as it not only prevents the random aggregation of colloidal particles toward CuO nanoleaves but also helps to orientate nanowire growth by the coalescence and alignment in one direction of the colloidal particles. The concentration of OH(-) in the reaction system is also important for nanowire growth. In the absence of PEG200, nanoleaves are formed by an Ostwald ripening process. The band-gap value estimated from a UV-Vis absorption spectrum of CuO nanowire bundles is 2.32 eV. The photodegradation of a model pollutant, rhodamine B, by CuO nanowires and nanoleaves was compared with commercial nanopowders, showing that the as-synthesized ultralong CuO polycrystalline nanowire bundles have an enhanced photocatalytic activity with 87% decomposition of rhodamine B after an 8-h reaction, which was much higher than that of single-crystal nanoleaves (61%) and commercial nanopowders (32%). The origin of the high photocatalytic activity of these new polycrystalline CuO nanowire bundles has been discussed. This present work reveals that the (0 0 2) crystallographic surface is more favorable for photocatalytic decomposition of organic compounds and that these ultralong CuO nanowire bundles are potential candidates for photocatalysts in wastewater treatment. (C) 2010 Elsevier Inc. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000279968700002	Publication Date	2010-04-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-9797;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.233	Times cited	70	Open Access
	Notes				Approved	Most recent IF: 4.233; 2010 IF: 3.068
	Call Number	UA @ lucian @ c:irua:95589			Serial	3795
Permanent link to this record



	Author	Philippaerts, A.; Paulussen, S.; Turner, S.; Lebedev, O.I.; Van Tendeloo, G.; Poelman, H.; Bulut, M.; de Clippel, F.; Smeets, P.; Sels, B.; Jacobs, P.
	Title	Selectivity in sorption and hydrogenation of methyl oleate and elaidate on MFI zeolites			Type	A1 Journal article
	Year	2010	Publication	Journal of catalysis	Abbreviated Journal	J Catal
	Volume	270	Issue	1	Pages	172-184
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Different zeolites were tested for selective removal of methyl elaidate (trans isomer) from an equimolar mixture with methyl oleate (cis isomer). Sorption experiments of the geometric isomers show that only ZSM-5 samples with reduced Al content in the framework are able to discriminate among the bent cis and the linear trans fatty acid methyl esters. Hydrogenation experiments of equimolar methyl oleate and elaidate mixtures at low temperature (65 °C) and high hydrogen pressure (6.0 MPa), using Pt catalysts, confirm this result. Only with a Pt/NaZSM-5 catalyst outspoken selectivity for the hydrogenation of the trans isomer is obtained. In order to prepare a selective Pt/ZSM-5 catalyst, the influence of Pt addition (impregnation, ion-exchange and competitive ion-exchange) and Pt activation (different calcination and reduction temperatures) on the Pt-distribution and Pt particle size was investigated using SEM, bright-field and HR TEM, EDX, electron tomography, CO-chemisorption, XPS, XRD, and UVvis measurements. The best result in terms of hydrogenation activity and selectivity is obtained with a Pt/ZSM-5 catalyst, which is prepared via competitive ion-exchange, followed by slow calcination up to 350 °C under high O2 flow and a reduction up to 500 °C under H2. This preparation method leads to a Pt/ZSM-5 catalyst with the best Pt distribution and the smallest Pt clusters occluded in the zeolite structure. Finally, the influence of zeolite crystal size, morphology, and elemental composition of ZSM-5 on hydrogenation activity and selectivity was investigated in detail.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	San Diego, Calif.	Editor
	Language		Wos	000275966100021	Publication Date	2010-01-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-9517;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.844	Times cited	24	Open Access
	Notes	FWO; IAP-IV; Methusalem			Approved	Most recent IF: 6.844; 2010 IF: 5.415
	Call Number	UA @ lucian @ c:irua:82435			Serial	2970
Permanent link to this record



	Author	Roet, D.; van Espen, P.
	Title	Monte Carlo simulation of X-ray spectra from low energy electrons using optical data			Type	A1 Journal article
	Year	2010	Publication	Nuclear instruments and methods in physics research: B: beam interactions with materials and atoms	Abbreviated Journal
	Volume	268	Issue	17/18	Pages	2794-2800
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	An approach using optical data to simulate both the bremsstrahlung continuum and characteristic K and L X-ray lines generated by low energy electrons (cfr. electron microscopy) in solids is discussed in this paper. The necessary analytical expressions together with the data to calculate the relevant cross sections for elastic and inelastic interactions at these energies along with variance reduction techniques are given. The results of the Monte Carlo simulation are compared to experimental data measured with a JEOL 6300 electron microscope.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000281498900039	Publication Date	2010-07-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0168-583x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:84261			Serial	8281
Permanent link to this record



	Author	de Backer, J.W.; Vos, W.G.; Vinchurkar, S.C.; Claes, R.; Drollmann, A.; Wulfrank, D.; Parizel, P.M.; Germonpré, P.; de Backer, W.
	Title	Validation of computational fluid dynamics in CT-based airway models with SPECT/CT1			Type	A1 Journal article
	Year	2010	Publication	Radiology	Abbreviated Journal	Radiology
	Volume	257	Issue	3	Pages	854-862
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Vision lab; Antwerp Surgical Training, Anatomy and Research Centre (ASTARC); Laboratory Experimental Medicine and Pediatrics (LEMP)
	Abstract	Purpose: To compare the results obtained by using numerical flow simulations with the results of combined single photon emission computed tomography (SPECT) and computed tomography (CT) and to demonstrate the importance of correct boundary conditions for the numerical methods to account for the large amount of interpatient variability in airway geometry. Materials and Methods: This study was approved by all relevant institutional review boards. All patients gave their signed informed consent. In this study, six patients with mild asthma (three men; three women; overall mean age, 46 years ± 17 [standard deviation]) underwent CT at functional residual capacity and total lung capacity, as well as SPECT/CT. CT data were used for segmentation and computational fluid dynamics (CFD) simulations. A comparison was made between airflow distribution, as derived with (a) SPECT/CT through tracer concentration analysis, (b) CT through lobar expansion measurement, and (c) CFD through flow computer simulation. Also, the heterogeneity of the ventilation was examined. Results: Good agreement was found between SPECT/CT, CT, and CFD in terms of airflow distribution and hot spot detection. The average difference for the internal airflow distribution was less than 3% for CFD and CT versus SPECT/CT. Heterogeneity in ventilation patterns could be detected with SPECT/CT and CFD. Conclusion: This results of this study show that patient-specific computer simulations with appropriate boundary conditions yield information that is similar to that obtained with functional imaging tools, such as SPECT/CT.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000284469300031	Publication Date	2010-11-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0033-8419;1527-1315;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.296	Times cited	100	Open Access
	Notes	; Supported by Novartis. ;			Approved	Most recent IF: 7.296; 2010 IF: 6.069
	Call Number	UA @ lucian @ c:irua:85379			Serial	3831
Permanent link to this record



	Author	Verleysen, E.; Bender, H.; Richard, O.; Schryvers, D.; Vandervorst, W.
	Title	Characterization of nickel silicides using EELS-based methods			Type	A1 Journal article
	Year	2010	Publication	Journal of microscopy	Abbreviated Journal	J Microsc-Oxford
	Volume	240	Issue	1	Pages	75-82
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The characterization of Ni-silicides using electron energy loss spectroscopy (EELS) based methods is discussed. A series of Ni-silicide phases is examined: Ni3Si, Ni31Si12, Ni2Si, NiSi and NiSi2. The composition of these phases is determined by quantitative core-loss EELS. A study of the low loss part of the EELS spectrum shows that both the energy and the shape of the plasmon peak are characteristic for each phase. Examination of the Ni-L edge energy loss near edge structure (ELNES) shows that the ratio and the sum of the L2 and L3 white line intensities are also characteristic for each phase. The sum of the white line intensities is used to determine the trend in electron occupation of the 3d states of the phases. The dependence of the plasmon energy on the electron occupation of the 3d states is demonstrated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000281715400009	Publication Date	2010-05-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-2720;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.692	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 1.692; 2010 IF: 1.872
	Call Number	UA @ lucian @ c:irua:84879			Serial	329
Permanent link to this record



	Author	Amin-Ahmadi, B.; Aashuri, H.
	Title	Semisolid structure for M2 high speed steel prepared by cooling slope			Type	A1 Journal article
	Year	2010	Publication	Journal of materials processing technology	Abbreviated Journal	J Mater Process Tech
	Volume	210	Issue	12	Pages	1632-1635
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Effects of cooling slope angle and the temperature of molten metal on the globular structure of M2 high speed steel after holding at the semisolid state have been investigated. The globular structure was achieved by pouring the molten metal at 1595 °C on the ceramic cooling slope with the length of 200 mm and the angle of 25°. The globular structure of M2 high speed steel in the form of rolledannealed and as cast condition after holding at semisolid state has been achieved. The size of globular grains of cooling slope sample was smaller than that of the rolledannealed and as cast samples. Solid particles of rolledannealed sample after holding at semisolid state had better roundness compared with cooling slope sample. Dissolution of carbides in the austenite phase at grain boundaries leads to formation of globular particles in the semisolid state. MC-type and M6C-type eutectic carbides reprecipitate during cooling cycle along grain boundaries.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000280498200011	Publication Date	2010-06-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0924-0136;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.147	Times cited	12	Open Access
	Notes				Approved	Most recent IF: 3.147; 2010 IF: 1.570
	Call Number	UA @ lucian @ c:irua:122042			Serial	2983
Permanent link to this record