NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	61–90 of 98 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 >>

List View

Citations

Details

	Records
	Author	Neyts, E.; Maeyens, A.; Pourtois, G.; Bogaerts, A.
	Title	A density-functional theory simulation of the formation of Ni-doped fullerenes by ion implantation			Type	A1 Journal article
	Year	2011	Publication	Carbon	Abbreviated Journal	Carbon
	Volume	49	Issue	3	Pages	1013-1017
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Using self-consistent KohnSham density-functional theory molecular dynamics simulations, we demonstrate the theoretical possibility to synthesize NiC60, the incarfullerene Ni@C60 and the heterofullerene C59Ni in an ion implantation setup. The corresponding formation mechanisms of all three complexes are elucidated as a function of the ion implantation energy and impact location, suggesting possible routes for selectively synthesizing these complexes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000286683500032	Publication Date	2010-11-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0008-6223;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.337	Times cited	13	Open Access
	Notes				Approved	Most recent IF: 6.337; 2011 IF: 5.378
	Call Number	UA @ lucian @ c:irua:85139			Serial	639
Permanent link to this record



	Author	Neyts, E.C.; Khalilov, U.; Pourtois, G.; van Duin, A.C.T.
	Title	Hyperthermal oxygen interacting with silicon surfaces : adsorption, implantation, and damage creation			Type	A1 Journal article
	Year	2011	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	115	Issue	15	Pages	4818-4823
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Using reactive molecular dynamics simulations, we have investigated the effect of single-impact, low-energy (thermal-100 eV) bombardment of a Si(100){2 × 1} surface by atomic and molecular oxygen. Penetration probability distributions, as well as defect formation distributions, are presented as a function of the impact energy for both species. It is found that at low impact energy, defects are created chemically due to the chemisorption process in the top layers of the surface, while at high impact energy, additional defects are created by a knock-on displacement of Si. These results are of particular importance for understanding device performances of silica-based microelectronic and photovoltaic devices.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000288401200060	Publication Date	2011-03-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	28	Open Access
	Notes				Approved	Most recent IF: 4.536; 2011 IF: 4.805
	Call Number	UA @ lucian @ c:irua:89858			Serial	1543
Permanent link to this record



	Author	Neyts, E.C.; Thijsse, B.J.; Mees, M.J.; Bal, K.M.; Pourtois, G.
	Title	Establishing uniform acceptance in force biased Monte Carlo simulations			Type	A1 Journal article
	Year	2012	Publication	Journal of chemical theory and computation	Abbreviated Journal	J Chem Theory Comput
	Volume	8	Issue	6	Pages	1865-1869
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Uniform acceptance force biased Monte Carlo (UFMC) simulations have previously been shown to be a powerful tool to simulate atomic scale processes, enabling one to follow the dynamical path during the simulation. In this contribution, we present a simple proof to demonstrate that this uniform acceptance still complies with the condition of detailed balance, on the condition that the characteristic parameter lambda = 1/2 and that the maximum allowed step size is chosen to be sufficiently small. Furthermore, the relation to Metropolis Monte Carlo (MMC) is also established, and it is shown that UFMC reduces to MMC by choosing the characteristic parameter lambda = 0 [Rao, M. et al. Mol. Phys. 1979, 37, 1773]. Finally, a simple example compares the UFMC and MMC methods.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000305092400002	Publication Date	2012-05-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1549-9618;1549-9626;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.245	Times cited	20	Open Access
	Notes				Approved	Most recent IF: 5.245; 2012 IF: 5.389
	Call Number	UA @ lucian @ c:irua:99090			Serial	1082
Permanent link to this record



	Author	Nishio, K.; Lu, A.K.A.; Pourtois, G.
	Title	Low-strain Si/O superlattices with tunable electronic properties : ab initio calculations			Type	A1 Journal article
	Year	2015	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	91	Issue	91	Pages	165303
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	We propose that low-strain Si/O superlattices can be constructed by connecting reconstructed Si{001} surfaces by Si-O-Si bridges. Ab initio calculations show that our models are energetically more favorable than all the models proposed so far. The part of our Si/O superlattice model is experimentally accessible just by oxidizing a Si( 001) substrate. To complete our Si/O superlattice model, we propose a three-step method. We also explore the potential of our Si/O superlattice models for new materials used in future Si electronics. We find that the location of the channel where the carriers travel can be controlled between the interfaces and the Si layers by the insertion of O atoms into the Si-Si dimers. By revealing the origins of the interface electron and hole states, we find that similar interface states should be easily achieved for Si slabs and Si substrates. Interestingly, the interface electrons and holes have small effective masses in the direction parallel to the channel and large effective masses in the direction normal to the channel, which makes the Si/O superlattices attractive to be used for channel materials. We also find that the valley splitting of Si is enhanced by the formation of the Si/O/Si interfaces, which is ideal for developing Si-based qubits. Our findings open new perspectives to design and control the electronic properties of Si.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000352986700002	Publication Date	2015-04-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	6	Open Access
	Notes				Approved	Most recent IF: 3.836; 2015 IF: 3.736
	Call Number	c:irua:125998			Serial	1852
Permanent link to this record



	Author	Nourbakhsh, A.; Cantoro, M.; Klekachev, A.V.; Pourtois, G.; Vosch, T.; Hofkens, J.; van der Veen, M.H.; Heyns, M.M.; de Gendt, S.; Sels, B.F.
	Title	Single layer vs bilayer graphene : a comparative study of the effects of oxygen plasma treatment on their electronic and optical properties			Type	A1 Journal article
	Year	2011	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	115	Issue	33	Pages	16619-16624
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	This contribution presents the effects of a mild O2 plasma treatment on the structural, optical, and electrical properties of single-layer (SLG) and bilayer graphene (BLG). Unexpectedly, we observe only photoluminescence in the SLG parts of a graphene flake composed of regions of various thickness upon O2 plasma treatment, whereas the BLG and few-layer graphene (FLG) parts remain optically unchanged. Confirmed with X-ray photoelectron spectroscopy (XPS) that O2 plasma induces epoxide and hydroxyl-like groups in graphene, density functional theory (DFT) calculations are carried out on representative epoxidized and hydroxylated SLG and BLG models to predict density of states (DOS) and band structures. Sufficiently oxidized SLG shows a bandgap and thus loss of semimetallic behavior, while oxidized BLG maintains its semimetallic behavior even at high oxygen density in agreement with the results of the photoluminescence spectroscopy (PL) experiments. DFT calculations confirm that the Fermi velocity in epoxidized BLG is remarkably comparable with that of pristine SLG, pointing to a similarity of electronic band structure. The similarity is also experimentally demonstrated by the electrical characterization of a plasma-treated BLG-FET. As expected from the electronegative oxygen adatoms in the graphene, epoxidized BLG presents conductive features typical of hole doping. Moreover, the electrical characteristics suggest band structures closely related to that of epoxidized graphene while deviating from that of hydroxylated graphene. Finally, upon O2 plasma treatment of BLG, the four-component 2D peak around 2700 cm1 in the Raman spectrum evolves into a single Lorentzian line, very like the 2D peak of pristine SLG. Summarizing, the data in this contribution recommend that a controlled O2 plasma treatment, which is compatible with CMOS process flow in contrast to wet chemical oxidation methods, provides an efficient and valuable technique to exploit the transport properties of the bottom layer of BLG.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000294077000047	Publication Date	2011-06-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	46	Open Access
	Notes				Approved	Most recent IF: 4.536; 2011 IF: 4.805
	Call Number	UA @ lucian @ c:irua:91715			Serial	3024
Permanent link to this record



	Author	Pham, A.-T.; Sorée, B.; Magnus, W.; Jungemann, C.; Meinerzhagen, B.; Pourtois, G.
	Title	Quantum simulations of electrostatics in Si cylindrical junctionless nanowire nFETs and pFETs with a homogeneous channel including strain and arbitrary crystallographic orientations			Type	A1 Journal article
	Year	2012	Publication	Solid state electronics	Abbreviated Journal	Solid State Electron
	Volume	71	Issue		Pages	30-36
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Simulation results of electrostatics in Si cylindrical junctionless nanowire transistors with a homogenous channel are presented. Junctionless transistors including strain and arbitrary crystallographic orientations are studied. Size quantization effects are simulated by self-consistent solutions of the Poisson and Schrodinger equations. The 6 x 6 k.p method is employed for the calculation of the valence subband structure in a junctionless nanowire pFET. The influence of stress/strain and crystallographic channel orientation on to the electrostatics in terms of subband structure, charge density, and C-V curve is systematically studied. (C) 2011 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000303033800007	Publication Date	2011-12-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0038-1101;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.58	Times cited	2	Open Access
	Notes	; ;			Approved	Most recent IF: 1.58; 2012 IF: 1.482
	Call Number	UA @ lucian @ c:irua:98245			Serial	2786
Permanent link to this record



	Author	Pham, A.-T.; Zhao, Q.-T.; Jungemann, C.; Meinerzhagen, B.; Mantl, S.; Sorée, B.; Pourtois, G.
	Title	Comparison of strained SiGe heterostructure-on-insulator (0 0 1) and (1 1 0) PMOSFETs : CV characteristics, mobility, and ON current			Type	A1 Journal article
	Year	2011	Publication	Solid state electronics	Abbreviated Journal	Solid State Electron
	Volume	65-66	Issue		Pages	64-71
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Strained SiGe heterostructure-on-insulator (0 0 1) and (1 1 0) PMOSFETs are investigated including important aspects like CV characteristics, mobility, and ON current. The simulations are based on the self-consistent solution of 6 × 6 k · p Schrödinger Equation, multi subband Boltzmann Transport Equation and Poisson Equation, and capture size quantization, strain, crystallographic orientation, and SiGe alloy effects on a solid physical basis. The simulation results are validated by comparison with different experimental data sources. The simulation results show that the strained SiGe HOI PMOSFET with (1 1 0) surface orientation has a higher gate capacitance and a much higher mobility and ON current compared to a similar device with the traditional (0 0 1) surface orientation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000297182700012	Publication Date	2011-07-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0038-1101;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.58	Times cited	2	Open Access
	Notes	; ;			Approved	Most recent IF: 1.58; 2011 IF: 1.397
	Call Number	UA @ lucian @ c:irua:92866			Serial	433
Permanent link to this record



	Author	Phung, Q.M.; Vancoillie, S.; Delabie, A.; Pourtois, G.; Pierloot, K.
	Title	Ruthenocene and cyclopentadienyl pyrrolyl ruthenium as precursors for ruthenium atomic layer deposition : a comparative study of dissociation enthalpies			Type	A1 Journal article
	Year	2012	Publication	Theoretical chemistry accounts : theory, computation, and modeling	Abbreviated Journal	Theor Chem Acc
	Volume	131	Issue	7	Pages	1238
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	RuCp2 (ruthenocene) and RuCpPy (cyclopentadienyl pyrrolyl ruthenium) complexes are used in ruthenium (Ru) atomic layer deposition (ALD) but exhibit a markedly different reactivity with respect to the substrate and co-reactant. In search of an explanation, we report here the results of a comparative study of the heterolytic and homolytic dissociation enthalpy of these two ruthenium complexes, making use of either density functional theory (DFT) or multiconfigurational perturbation theory (CASPT2). While both methods predict distinctly different absolute dissociation enthalpies, they agree on the relative values between both molecules. A reduced heterolytic dissociation enthalpy is obtained for RuCpPy compared to RuCp2, although the difference obtained from CASPT2 (19.9 kcal/mol) is slightly larger than the one obtained with any of the DFT functionals (around 17 kcal/mol). Both methods also agree on the more pronounced stability of the Cp- ligand in RuCpPy than in RuCp2 (by around 9 kcal/mol with DFT and by 6 kcal/mol with CASPT2).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000307274300003	Publication Date	2012-07-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1432-881X;1432-2234;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.89	Times cited	5	Open Access
	Notes				Approved	Most recent IF: 1.89; 2012 IF: 2.233
	Call Number	UA @ lucian @ c:irua:101139			Serial	2935
Permanent link to this record



	Author	Phung, Q.M.; Vancoillie, S.; Pourtois, G.; Swerts, J.; Pierloot, K.; Delabie, A.
	Title	Atomic layer deposition of ruthenium on a titanium nitride surface : a density functional theory study			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	117	Issue	38	Pages	19442-19453
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Because of its excellent properties in nanotechnology applications, atomic layer deposition of ruthenium (Ru) has been the subject of numerous experimental studies. Recently, two different Ru precursors were compared for plasma-enhanced atomic layer deposition (PEALD) of Ru, and their reactivity was found to be different. Inhibition was observed for bis(ethylcyclopentadienyl)ruthenium (Ru(EtCp)(2)), while nearly linear growth behavior was observed for (methylcyclopentadienyl-pyrrolyl)ruthenium (Ru(MeCp)Py). To understand this difference in reactivity, we investigate the adsorption of RuCp, and RuCpPy (i.e., without substituents) on a TiN surface using calculations based on periodic boundary conditions density functional theory (DFT) combined with experiments based on Rutherford backscattering spectroscopy (RBS). The calculations demonstrate that the RuCpPy precursor chemisorbs on the TiN(100) surface while the RuCp2 precursor only physisorbs. We propose a reaction mechanism for the chemisorption of RuCpPy. The area density of the calculated RuCpPy surface species is compared with the experimental values from RBS. The impact of a H-plasma is also investigated. The DFT calculations and experimental results from RBS provide insight into the adsorption processes of the RuCpPy and RuCp2 precursors on the TiN(100) surface.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000330162500022	Publication Date	2013-08-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	6	Open Access
	Notes				Approved	Most recent IF: 4.536; 2013 IF: 4.835
	Call Number	UA @ lucian @ c:irua:114855			Serial	170
Permanent link to this record



	Author	Pourtois, G.; Dabral, A.; Sankaran, K.; Magnus, W.; Yu, H.; de de Meux, A.J.; Lu, A.K.A.; Clima, S.; Stokbro, K.; Schaekers, M.; Houssa, M.; Collaert, N.; Horiguchi, N.
	Title	Probing the intrinsic limitations of the contact resistance of metal/semiconductor interfaces through atomistic simulations			Type	P1 Proceeding
	Year	2017	Publication	Semiconductors, Dielectrics, And Metals For Nanoelectronics 15: In Memory Of Samares Kar	Abbreviated Journal
	Volume		Issue		Pages	303-311
	Keywords	P1 Proceeding; Engineering sciences. Technology; Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this contribution, we report a fundamental study of the factors that set the contact resistivity between metals and highly doped semiconductors. We investigate the case of n-type doped Si contacted with amorphous TiSi combining first-principles calculations with Non-Equilibrium Green functions transport simulations. The intrinsic contact resistivity is found to saturate at similar to 2x10(-10) Omega.cm(2) with the doping concentration and sets an intrinsic limit to the ultimate contact resistance achievable for n-doped Si vertical bar amorphous-TiSi. This limit arises from the intrinsic properties of the semiconductor and of the metal such as their electron effective masses and Fermi energies. We illustrate that, in this regime, contacting metals with a heavy electron effective mass helps reducing the interface intrinsic contact resistivity.
	Address
	Corporate Author				Thesis
	Publisher	Electrochemical soc inc	Place of Publication	Pennington	Editor
	Language		Wos	000426271800028	Publication Date	2017-10-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume	80	Series Issue	1	Edition
	ISSN	978-1-62332-470-4; 978-1-60768-818-1	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	1	Open Access	Not_Open_Access
	Notes	; ;			Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:149966			Serial	4976
Permanent link to this record



	Author	Pourtois, G.; Lauwers, A.; Kittl, J.; Pantisano, L.; Sorée, B.; De Gendt, S.; Magnus, W.; Heyns, A.; Maex, K.
	Title	First-principle calculations on gate/dielectric interfaces : on the origin of work function shifts			Type	A1 Journal article
	Year	2005	Publication	Microelectronic engineering	Abbreviated Journal	Microelectron Eng
	Volume	80	Issue		Pages	272-279
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The impact of interfacial chemistry occurring at dielectric/gate interface of P-MOS and N-MOS devices is reviewed through a quick literature survey. A specific emphasis is put on the way the bond polarization that occurs between a dielectric and a metal substrate impacts on the gate work function. First-principle simulations are then used to study the work function changes induced by dopant aggregation in nickel monosilicide metal gates. It is shown that the changes are a natural consequence of the variation of the interface polarization.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000231517000062	Publication Date	2005-06-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0167-9317;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.806	Times cited	31	Open Access
	Notes				Approved	Most recent IF: 1.806; 2005 IF: 1.347
	Call Number	UA @ lucian @ c:irua:95095			Serial	1199
Permanent link to this record



	Author	Quan Manh, P.; Pourtois, G.; Swerts, J.; Pierloot, K.; Delabie, A.
	Title	Atomic layer deposition of Ruthenium on Ruthenium surfaces : a theoretical study			Type	A1 Journal article
	Year	2015	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	119	Issue	119	Pages	6592-6603
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Atomic, layer deposition,(ALD of ruthenium using two ruthenium precursors, i.e., Ru(C5H5)(2) (RuCp2) and Ru(C5H5)(C4H4N) (RuCpPy), is studied using density functional theory. By investigating the reaction mechanisms On bare ruthenium surfaces, i.e., (001), (101), and (100), and H-terminated surfaces, an atomistic insight in the Ru ALD is provided. The calculated results show that on the Ru surfaces both RuCp2 and RuCpPy an undergo dehydrogenation and ligand dissociation reactions. RuCpPy is more reactive than RuCp2. By forming a, strong, bond between N of Py and Ru of the surface, RuCpPy can easily chemisorb on the surfaces. The reactions of RuCp2,On the Surfaces are less favorable the adsorption is not strong enough This could be a,factor contributing to the higher growth-per-cycle of Ru using RuCpPy, as observed experimentally. By Studying, the adsorption on H-terminated Ru surfaces, We showed that H Can prevent the adsorption of the precursors, thus inhibiting the growth of Ru. Our calculations indicate that the H content on the surface can have an impact on the growth-per-cycle. Finally, our simulations also demonstrate large impacts of the surface structure on the reaction mechanisms. Of the three surfaces, the (100) surface, which is the less stable and has a zigzag surface structure, is also the most reactive one.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000351970800015	Publication Date	2015-03-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	10	Open Access
	Notes				Approved	Most recent IF: 4.536; 2015 IF: 4.772
	Call Number	c:irua:125544			Serial	171
Permanent link to this record



	Author	Sankaran, K.; Clima, S.; Mees, M.; Adelmann, C.; Tokei, Z.; Pourtois, G.
	Title	Exploring alternative metals to Cu and W for interconnects : an ab initio Insight			Type	P1 Proceeding
	Year	2014	Publication	2014 Ieee International Interconnect Technology Conference / Advanced Metallization Conference (iitc/amc)	Abbreviated Journal
	Volume		Issue		Pages	193-195
	Keywords	P1 Proceeding; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The properties of alternative metals to Cu and W for interconnect applications are reviewed based on first-principles simulations and benchmarked in terms of intrinsic bulk resistivity and electromigration.
	Address
	Corporate Author				Thesis
	Publisher	Ieee	Place of Publication	New york	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	978-1-4799-5018-8	ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:127034			Serial	1149
Permanent link to this record



	Author	Sankaran, K.; Clima, S.; Mees, M.; Pourtois, G.
	Title	Exploring alternative metals to Cu and W for interconnects applications using automated first-principles simulations			Type	A1 Journal article
	Year	2015	Publication	ECS journal of solid state science and technology	Abbreviated Journal	Ecs J Solid State Sc
	Volume	4	Issue	4	Pages	N3127-N3133
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The bulk properties of elementary metals and copper based binary alloys have been investigated using automated first-principles simulations to evaluate their potential to replace copper and tungsten as interconnecting wires in the coming CMOS technology nodes. The intrinsic properties of the screened candidates based on their cohesive energy and on their electronic properties have been used as a metrics to reflect their resistivity and their sensitivity to electromigration. Using these values, the 'performances' of the alloys have been benchmarked with respect to the Cu and W ones. It turns out that for some systems, alloying Cu with another element leads to a reduced tendency to electromigration. This is however done at the expense of a decrease of the conductivity of the alloy with respect to the bulk metal. (C) 2014 The Electrochemical Society. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher	Electrochemical society	Place of Publication	Pennington (N.J.)	Editor
	Language		Wos	000349547900018	Publication Date	2014-11-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2162-8769;2162-8777;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.787	Times cited	19	Open Access
	Notes				Approved	Most recent IF: 1.787; 2015 IF: 1.558
	Call Number	c:irua:125296			Serial	1150
Permanent link to this record



	Author	Sankaran, K.; Moors, K.; Dutta, S.; Adelmann, C.; Tokei, Z.; Pourtois, G.
	Title	Metallic ceramics for low resitivity interconnects : an ab initio insight			Type	P1 Proceeding
	Year	2018	Publication	Proceedings of the IEEE ... International Interconnect Technology Conference T2 – IEEE International Interconnect Technology Conference (IITC), JUN 04-07, 2018, Santa Clara, CA	Abbreviated Journal
	Volume		Issue		Pages	160-162
	Keywords	P1 Proceeding; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The scalability potential of low resistivity ternary metallic alloys (MAX) as an interconnect medium has been benchmarked against copper through first-principle simulations. We report that some carbon and nitrogen MAX phases have the potential to display a reduced sensitivity of their intrinsic resistivity to scaling, while showing improved electromigration properties.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000468672900053	Publication Date
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	978-1-5386-4337-2; 978-1-5386-4337-2	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:160474			Serial	8219
Permanent link to this record



	Author	Sankaran, K.; Pourtois, G.; Degraeve, R.; Zahid, M.B.; Rignanese, G.-M.; Van Houdt, J.
	Title	First-principles modeling of intrinsic and extrinsic defects in \gamma-Al₂O₃			Type	A1 Journal article
	Year	2010	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	97	Issue	21	Pages	212906
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The electronic properties of a set of intrinsic and extrinsic point defects in gamma-Al2O3 are investigated using quasiparticle calculations within the G(0)W(0) approximation. We find that the electronic signature of atomic vacancies lie deep in the band gap, close to the top of the valence band edge. The introduction of C, Si, and N impurities induces defective levels that are located close to the conduction band edge and near the middle of the band gap of the oxide. The comparison with electrical measurements reveals that the energy levels of some of these defects match with the electronic fingerprint of the defects reported in gamma-Al2O3 based nonvolatile memories. (C) 2010 American Institute of Physics. [doi:10.1063/1.3507385]
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000284618300039	Publication Date	2010-11-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	12	Open Access
	Notes				Approved	Most recent IF: 3.411; 2010 IF: 3.841
	Call Number	UA @ lucian @ c:irua:105617			Serial	1213
Permanent link to this record



	Author	Sankaran, K.; Swerts, J.; Carpenter, R.; Couet, S.; Garello, K.; Evans, R.F.L.; Rao, S.; Kim, W.; Kundu, S.; Crotti, D.; Kar, G.S.; Pourtois, G.
	Title	Evidence of magnetostrictive effects on STT-MRAM performance by atomistic and spin modeling			Type	P1 Proceeding
	Year	2018	Publication	2018 Ieee International Electron Devices Meeting (iedm)	Abbreviated Journal
	Volume		Issue		Pages
	Keywords	P1 Proceeding; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	For the first time, we demonstrate, using an atomistic description of a 30nm diameter spin-transfer-torque magnetic random access memories (STT-MRAM), that the difference in mechanical properties of its sub-nanometer layers induces a high compressive strain in the magnetic tunnel junction (MTJ) and leads to a detrimental magnetostrictive effect. Our model explains the issues met in engineering the electrical and magnetic performances in scaled STT-MRAM devices. The resulting high compressive strain built in the stack, particularly in the MgO tunnel barrier (t-MgO), and its associated non-uniform atomic displacements, impacts on the quality of the MTJ interface and leads to strain relieve mechanisms such as surface roughness and adhesion issues. We illustrate that the strain gradient induced by the different materials and their thicknesses in the stacks has a negative impact on the tunnel magneto-resistance (TMR), on the magnetic nucleation process and on the STT-MRAM performance.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000459882300147	Publication Date
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	978-1-72811-987-8; 978-1-72811-987-8	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:158694			Serial	7942
Permanent link to this record



	Author	Sankaran, K.; Swerts, J.; Couet, S.; Stokbro, K.; Pourtois, G.
	Title	Oscillatory behavior of the tunnel magnetoresistance due to thickness variations in Ta vertical bar CoFe vertical bar MgO magnetic tunnel junctions : a first-principles study			Type	A1 Journal article
	Year	2016	Publication	Physical review B	Abbreviated Journal	Phys Rev B
	Volume	94	Issue	94	Pages	094424
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	To investigate the impact of both the CoFe ferromagnetic layer thickness and the capping paramagnetic layer on the tunnel magnetoresistance (TMR), we performed first-principles simulations on epitaxial magnetic tunnel junctions contacted with either CoFe or Ta paramagnetic capping layers. We observed a strong oscillation of the TMR amplitude with respect to the thickness of the ferromagnetic layer. The TMR is found to be amplified whenever the MgO spin tunnel barrier is thickened. Quantization of the electronic structure of the ferromagnetic layers is found to be at the origin of this oscillatory behavior. Metals such as Ta contacting the magnetic layer are found to enhance the amplitude of the oscillations due to the occurrence of an interface dipole. The latter drives the band alignment and tunes the nature of the spin channels that are active during the tunneling process. Subsequently, the regular transmission spin channels are modulated in the magnetic tunnel junction stack and other complex ones are being activated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000383860700004	Publication Date	2016-09-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2469-9950;2469-9969;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	4	Open Access
	Notes				Approved	Most recent IF: 3.836
	Call Number	UA @ lucian @ c:irua:137122			Serial	4468
Permanent link to this record



	Author	Scalise, E.; Houssa, M.; Cinquanta, E.; Grazianetti, C.; van den Broek, B.; Pourtois, G.; Stesmans, A.; Fanciulli, M.; Molle, A.
	Title	Engineering the electronic properties of silicene by tuning the composition of MoX₂ and GaX (X = S,Se,Te) chalchogenide templates			Type	A1 Journal article
	Year	2014	Publication	2D materials	Abbreviated Journal	2D Mater
	Volume	1	Issue	1	Pages	011010
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	By using first-principles simulations, we investigate the interaction of a 2D silicon layer with two classes of chalcogenide-layered compounds, namely MoX2 and GaX (X = S, Se, Te). A rather weak (van der Waals) interaction between the silicene layers and the chalcogenide layers is predicted. We found that the buckling of the silicene layer is correlated to the lattice mismatch between the silicene layer and the MoX2 or GaX template. The electronic properties of silicene on these different templates largely depend on the buckling of the silicene layer: highly buckled silicene on MoS2 is predicted to be metallic, while low buckled silicene on GaS and GaSe is predicted to be semi-metallic, with preserved Dirac cones at the K points. These results indicate new routes for artificially engineering silicene nanosheets, providing tailored electronic properties of this 2D layer on non-metallic substrates. These non-metallic templates also open the way to the possible integration of silicene in future nanoelectronic devices.
	Address
	Corporate Author				Thesis
	Publisher	IOP Publishing	Place of Publication	Bristol	Editor
	Language		Wos	000353649900011	Publication Date	2014-05-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2053-1583;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.937	Times cited	49	Open Access
	Notes				Approved	Most recent IF: 6.937; 2014 IF: NA
	Call Number	UA @ lucian @ c:irua:126032			Serial	1048
Permanent link to this record



	Author	Scalise, E.; Houssa, M.; Pourtois, G.; Afanas'ev, V.; Stesmans, A.
	Title	Strain-induced semiconductor to metal transition in the two-dimensional honeycomb structure of MoS₂			Type	A1 Journal article
	Year	2012	Publication	Nano Research	Abbreviated Journal	Nano Res
	Volume	5	Issue	1	Pages	43-48
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The electronic properties of two-dimensional honeycomb structures of molybdenum disulfide (MoS(2)) subjected to biaxial strain have been investigated using first-principles calculations based on density functional theory. On applying compressive or tensile bi-axial strain on bi-layer and mono-layer MoS(2), the electronic properties are predicted to change from semiconducting to metallic. These changes present very interesting possibilities for engineering the electronic properties of two-dimensional structures of MoS(2).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000299085200006	Publication Date	2011-11-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1998-0124;1998-0000;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.354	Times cited	407	Open Access
	Notes				Approved	Most recent IF: 7.354; 2012 IF: 7.392
	Call Number	UA @ lucian @ c:irua:96262			Serial	3169
Permanent link to this record



	Author	Scalise, E.; Houssa, M.; Pourtois, G.; Afanas'ev, V.V.; Stesmans, A.
	Title	First-principles study of strained 2D MoS₂			Type	A1 Journal article
	Year	2014	Publication	Physica. E: Low-dimensional systems and nanostructures	Abbreviated Journal	Physica E
	Volume	56	Issue		Pages	416-421
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The electronic and vibrational properties of 2D honeycomb structures of molybdenum disulfide (MoS2) subjected to strain have been investigated using first-principles calculations based on density functional theory. We have studied the evolution of the electronic properties of bulk and layered MoS2, going down from a few layers up to a mono-layer, and next investigated the effect of bi-axial strain on their electronic structure and vibrational frequencies. Both for tensile and compressive biaxial strains, the shrinking of the energy band-gap of MoS2 with increasing level of applied strain is observed and a transition limit of the system from semiconducting to metallic is predicted to occur for strains in the range of 8-10%. We also found a progressive downshift (upshift) of both the E-2g(1) and A(1g) Raman active modes with increasing level of applied tensile (compressive) strain. Interestingly, significant changes in the curvature of the conduction and valence band near their extrema upon the application of strain are also predicted, with correlated variations of the electron and hole effective masses. These changes present interesting possibilities for engineering the electronic properties of 2D structures of MoS2. (C) 2012 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher	North-Holland	Place of Publication	Amsterdam	Editor
	Language		Wos	000330815800070	Publication Date	2012-08-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1386-9477;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.221	Times cited	72	Open Access
	Notes				Approved	Most recent IF: 2.221; 2014 IF: 2.000
	Call Number	UA @ lucian @ c:irua:115761			Serial	1220
Permanent link to this record



	Author	Scalise, E.; Houssa, M.; Pourtois, G.; Afanas'ev, V.V.; Stesmans, A.
	Title	Inelastic electron tunneling spectroscopy of HfO₂ gate stacks : a study based on first-principles modeling			Type	A1 Journal article
	Year	2011	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	99	Issue	13	Pages	132101,1-132101,3
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A first-principles modeling approach is used to investigate the vibrational properties of HfO2. The calculated phonon density of states is compared to experimental results obtained from inelastic electron tunneling spectroscopy (IETS) of various metal-oxide-semiconductor devices with HfO2 gate stacks. This comparison provides deep insights into the nature of the signatures of the complicated IETS spectra and provides valuable structural information about the gate stack, such as the possible presence of oxygen vacancies in jet-vapour deposited HfO2. Important structural differences between the interface of atomic-layer or molecular-beam deposited HfO2 and the Si substrate are also revealed.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000295618000036	Publication Date	2011-09-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	1	Open Access
	Notes				Approved	Most recent IF: 3.411; 2011 IF: 3.844
	Call Number	UA @ lucian @ c:irua:93611			Serial	1606
Permanent link to this record



	Author	Scalise, E.; Houssa, M.; Pourtois, G.; Afanas'ev, V.V.; Stesmans, A.
	Title	Structural and vibrational properties of amorphous GeO₂ from first-principles			Type	A1 Journal article
	Year	2011	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	98	Issue	20	Pages	202110,1-202110,3
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The structural and vibrational properties of amorphous germanium oxide (a-GeO<sub>2</sub>) are investigated using first-principles calculations based on density functional theory. We first generate an a-GeO<sub>2</sub> structure by first-principles molecular dynamics and analyze its structural properties. The vibrational spectra is then calculated within a density-functional approach. Both static and dynamic properties are in good agreement with experimental data. We next generate defects in our structure (oxygen vacancies with several density and charge states) and consider the most stable atomic configurations, focusing on the vibrational features of threefold coordinated O and divalent Ge centers.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000290812100038	Publication Date	2011-05-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	226	Open Access
	Notes				Approved	Most recent IF: 3.411; 2011 IF: 3.844
	Call Number	UA @ lucian @ c:irua:90222			Serial	3202
Permanent link to this record



	Author	Scalise, E.; Houssa, M.; Pourtois, G.; van den Broek, B.; Afanas'ev, V.; Stesmans, A.
	Title	Vibrational properties of silicene and germanene			Type	A1 Journal article
	Year	2013	Publication	Nano Research	Abbreviated Journal	Nano Res
	Volume	6	Issue	1	Pages	19-28
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The structural and vibrational properties of two-dimensional hexagonal silicon (silicene) and germanium (germanene) are investigated by means of first-principles calculations. It is predict that the silicene (germanene) structure with a small buckling of 0.44 (0.7 ) and bond lengths of 2.28 (2.44 ) is energetically the most favorable, and it does not exhibit imaginary phonon mode. The calculated non-resonance Raman spectra of silicene is characterized by a main peak at about 575 cm(-1), namely the G-like peak. For germanene, the highest peak is at about 290 cm(-1). Extensive calculations on armchair silicene nanoribbons and armchair germanene nanoribbons are also performed, with and without hydrogenation of the edges. The studies reveal other Raman peaks mainly distributed at lower frequencies than the G-like peak which could be attributed to the defects at the edges of the ribbons, thus not present in the Raman spectra of non-defective silicene and germanene. Particularly the Raman peak corresponding to the D mode is found to be located at around 515 cm(-1) for silicene and 270 cm(-1) for germanene. The calculated G-like and the D peaks are likely the fingerprints of the Raman spectra of the low-buckled structures of silicene and germanene.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000313658800003	Publication Date	2012-12-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1998-0124;1998-0000;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.354	Times cited	105	Open Access
	Notes				Approved	Most recent IF: 7.354; 2013 IF: 6.963
	Call Number	UA @ lucian @ c:irua:110106			Serial	3846
Permanent link to this record



	Author	Scarrozza, M.; Pourtois, G.; Houssa, M.; Heyns, M.; Stesmans, A.
	Title	Oxidation of the GaAs(001) surface : insights from first-principles calculations			Type	A1 Journal article
	Year	2012	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	85	Issue	19	Pages	195307-195307,8
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	We performed a detailed investigation of the oxidation of the technologically relevant GaAs(001)-beta 2(2x4) surface via density functional calculations. The purpose is to gain insights on the atomistic mechanisms and local bondings that underlie the degradation of the surface properties once exposed to oxygen. The study comprises the adsorption of single O atoms, through the sampling of several adsorption sites, and the subsequent formation of the O adsorbate at increasing coverage by taking into account multiple-atom adsorption. Based on the evaluation of the energetics and the structural properties of the atomistic models generated, the results here reported delineate a consistent picture of the initial stage of the surface oxidation: (i) at low coverage, in the limit of single O insertions, oxygen is incorporated on the surface forming a twofold-bridging Ga-O-As bond; (ii) at increasing coverage, as multiple O atoms are involved, this is accompanied by the formation of a threefold-coordinated bond (with two Ga and one As atoms); (iii) the latter has important implications regarding the electronic properties of the adsorbate since this O bonding may result in the formation of As dangling bonds. Moreover, a clear trend of increased energy gain for the incorporation of neighboring O atoms compared to single O insertions indicates that the formation of oxide clusters is favored over a regime of uniform oxidation. Our findings provide a detailed description of the O bonding and stress the importance of modeling the adsorption of multiple O atoms for an accurate description of the surface oxidation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000303755700006	Publication Date	2012-05-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 3.836; 2012 IF: 3.767
	Call Number	UA @ lucian @ c:irua:99122			Serial	2538
Permanent link to this record



	Author	Schoeters, B.; Leenaerts, O.; Pourtois, G.; Partoens, B.
	Title	Ab-initio study of the segregation and electronic properties of neutral and charged B and P dopants in Si and Si/SiO2 nanowires			Type	A1 Journal article
	Year	2015	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	118	Issue	118	Pages	104306
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	We perform first-principles calculations to investigate the preferred positions of B and P dopants, both neutral and in their preferred charge state, in Si and Si/SiO2 core-shell nanowires (NWs). In order to understand the observed trends in the formation energy, we isolate the different effects that determine these formation energies. By making the distinction between the unrelaxed and the relaxed formation energy, we separate the impact of the relaxation from that of the chemical environment. The unrelaxed formation energies are determined by three effects: (i) the effect of strain caused by size mismatch between the dopant and the host atoms, (ii) the local position of the band edges, and (iii) a screening effect. In the case of the SiNW (Si/SiO2 NW), these effects result in an increase of the formation energy away from the center (interface). The effect of relaxation depends on the relative size mismatch between the dopant and host atoms. A large size mismatch causes substantial relaxation that reduces the formation energy considerably, with the relaxation being more pronounced towards the edge of the wires. These effects explain the surface segregation of the B dopants in a SiNW, since the atomic relaxation induces a continuous drop of the formation energy towards the edge. However, for the P dopants, the formation energy starts to rise when moving from the center but drops to a minimum just next to the surface, indicating a different type of behavior. It also explains that the preferential location for B dopants in Si/SiO2 core-shell NWs is inside the oxide shell just next to the interface, whereas the P dopants prefer the positions next to the interface inside the Si core, which is in agreement with recent experiments. These preferred locations have an important impact on the electronic properties of these core-shell NWs. Our simulations indicate the possibility of hole gas formation when B segregates into the oxide shell.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000361636900031	Publication Date	2015-09-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	3	Open Access
	Notes	This work was carried out using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish government and the Universiteit Antwerpen.			Approved	Most recent IF: 2.068; 2015 IF: 2.183
	Call Number	c:irua:128729			Serial	4056
Permanent link to this record



	Author	Schoeters, B.; Neyts, E.C.; Khalilov, U.; Pourtois, G.; Partoens, B.
	Title	Stability of Si epoxide defects in Si nanowires : a mixed reactive force field/DFT study			Type	A1 Journal article
	Year	2013	Publication	Physical chemistry, chemical physics	Abbreviated Journal	Phys Chem Chem Phys
	Volume	15	Issue	36	Pages	15091-15097
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Modeling the oxidation process of silicon nanowires through reactive force field based molecular dynamics simulations suggests that the formation of Si epoxide defects occurs both at the Si/SiOx interface and at the nanowire surface, whereas for flat surfaces, this defect is experimentally observed to occur only at the interface as a result of stress. In this paper, we argue that the increasing curvature stabilizes the defect at the nanowire surface, as suggested by our density functional theory calculations. The latter can have important consequences for the opto-electronic properties of thin silicon nanowires, since the epoxide induces an electronic state within the band gap. Removing the epoxide defect by hydrogenation is expected to be possible but becomes increasingly difficult with a reduction of the diameter of the nanowires.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000323520600029	Publication Date	2013-07-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1463-9076;1463-9084;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.123	Times cited	3	Open Access
	Notes	; BS gratefully acknowledges financial support of the IWT, Institute for the Promotion of Innovation by Science and Technology in Flanders, via the SBO project “SilaSol”. This work was carried out using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish government and the Universiteit Antwerpen. ;			Approved	Most recent IF: 4.123; 2013 IF: 4.198
	Call Number	UA @ lucian @ c:irua:110793			Serial	3130
Permanent link to this record



	Author	Sorée, B.; Magnus, W.; Pourtois, G.
	Title	Analytical and self-consistent quantum mechanical model for a surrounding gate MOS nanowire operated in JFET mode			Type	A1 Journal article
	Year	2008	Publication	Journal of computational electronics	Abbreviated Journal	J Comput Electron
	Volume	7	Issue	3	Pages	380-383
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	We derive an analytical model for the electrostatics and the drive current in a silicon nanowire operating in JFET mode. We show that there exists a range of nanowire radii and doping densities for which the nanowire JFET satisfies reasonable device characteristics. For thin nanowires we have developed a self-consistent quantum mechanical model to obtain the electronic structure.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	S.l.	Editor
	Language		Wos	000208473800067	Publication Date	2008-02-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1569-8025;1572-8137;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.526	Times cited	70	Open Access
	Notes				Approved	Most recent IF: 1.526; 2008 IF: NA
	Call Number	UA @ lucian @ c:irua:89504			Serial	107
Permanent link to this record



	Author	Sorée, B.; Magnus, W.; Szepieniec, M.; Vandenbreghe, W.; Verhulst, A.; Pourtois, G.; Groeseneken, G.; de Gendt, S.; Heyns, M.
	Title	Novel device concepts for nanotechnology : the nanowire pinch-off FET and graphene tunnelFET			Type	A2 Journal article
	Year	2010	Publication	ECS transactions	Abbreviated Journal
	Volume	28	Issue		Pages	15-26
	Keywords	A2 Journal article; Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	We explain the basic operation of a nanowire pinch-off FET and graphene nanoribbon tunnelFET. For the nanowire pinch-off FET we construct an analytical model to obtain the threshold voltage as a function of radius and doping density. We use the gradual channel approximation to calculate the current-voltage characteristics of this device and we show that the nanowire pinch-off FET has a subthreshold slope of 60 mV/dec and good ION and ION/IOFF ratios. For the graphene nanoribbon tunnelFET we show that an improved analytical model yields more realistic results for the transmission probability and hence the tunneling current. The first simulation results for the graphene nanoribbon tunnelFET show promising subthreshold slopes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1938-5862	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:89510			Serial	2375
Permanent link to this record



	Author	van den Broek, B.; Houssa, M.; Iordanidou, K.; Pourtois, G.; Afanas'ev, V.V.; Stesmans, A.
	Title	Functional silicene and stanene nanoribbons compared to graphene: electronic structure and transport			Type	A1 Journal article
	Year	2016	Publication	2D materials	Abbreviated Journal	2D Mater
	Volume	3	Issue	1	Pages	015001
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Since the advent of graphene, other 2D materials have garnered interest; notably the single element materials silicene, germanene, and stanene. Weinvestigate the ballistic current-voltage (I-V) characteristics of armchair silicene and stanene armchair nanoribbons (AXNRs with X = Si, Sn) using a combination of density functional theory and non-equilibrium Green's functions. The impact of out-of-plane electric field and in-plane uniaxial strain on the ribbon geometries, electronic structure, and (I-V)s are considered and contrasted with graphene. Since silicene and stanene are sp(2)/sp(3) buckled layers, the electronic structure can be tuned by an electric field that breaks the sublattice symmetry, an effect absent in graphene. This decreases the current by similar to 50% for Sn, since it has the largest buckling. Uniaxial straining of the ballistic channel affects the AXNR electronic structure in multiple ways: it changes the bandgap and associated effective carrier mass, and creates a local buckling distortion at the lead-channel interface which induces a interface dipole. Due to the increasing sp(3) hybridization character with increasing element mass, large reconstructions rectify the strained systems, an effect absent in sp(2) bonded graphene. This results in a smaller strain effect on the current: a decrease of 20% for Sn at 15% tensile strain compared to a similar to 75% decrease for C.
	Address
	Corporate Author				Thesis
	Publisher	IOP Publishing	Place of Publication	Bristol	Editor
	Language		Wos	000373936300021	Publication Date	2016-01-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2053-1583	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.937	Times cited	19	Open Access
	Notes				Approved	Most recent IF: 6.937
	Call Number	UA @ lucian @ c:irua:144746			Serial	4658
Permanent link to this record