NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	61–90 of 332 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 >>

List View

Citations

Details

	Records
	Author	Sorée, B.; Magnus, W.; Vandenberghe, W.
	Title	Low-field mobility in ultrathin silicon nanowire junctionless transistors			Type	A1 Journal article
	Year	2011	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	99	Issue	23	Pages	233509-233509,3
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We theoretically investigate the phonon, surface roughness and ionized impurity limited low-field mobility of ultrathin silicon n-type nanowire junctionless transistors in the long channel approximation with wire radii ranging from 2 to 5 nm, as function of gate voltage. We show that surface roughness scattering is negligible as long as the wire radius is not too small and ionized impurity scattering is the dominant scattering mechanism. We also show that there exists an optimal radius where the ionized impurity limited mobility exhibits a maximum.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000298006100095	Publication Date	2011-12-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	20	Open Access
	Notes	; This work is supported by the EU project SQWIRE (FP7-ICT-STREP nr. 257111). William Vandenberghe gratefully acknowledges the Ph.D. stipend from the Institute for the Promotion of Innovation through Science and Technology in Flanders (IWT-Vlaanderen). ;			Approved	Most recent IF: 3.411; 2011 IF: 3.844
	Call Number	UA @ lucian @ c:irua:92865			Serial	1850
Permanent link to this record



	Author	Guttmann, P.; Bittencourt, C.; Ke, X.; Van Tendeloo, G.; Umek, P.; Arcon, D.; Ewels, C.P.; Rehbein, S.; Heim, S.; Schneider, G.
	Title	TXM-NEXAFS of TiO₂-based nanostructures			Type	P1 Proceeding
	Year	2011	Publication	AIP conference proceedings	Abbreviated Journal
	Volume	1365	Issue		Pages	437-440
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract	In this work, electronic properties of individual TiOx-pristine nanoribbons (NR) prepared by hydrothermal treatment of anatase TiO(2) micro-particles were studied using the HZB transmission x-ray microscope (TXM) at the BESSY II undulator beamline U41-FSGM. NEXAFS is ideally suited to study TiO(2)-based materials because both the O K-edge and Ti L-edge features are very sensitive to the local bonding environment, providing diagnostic information about the crystal structures and oxidation states of various forms of titanium oxides and sub-oxides. TXM-NEXAFS combines full-field x-ray microscopy with spectroscopy, allowing the study of the electronic structure of individual nanostructures with spatial resolution better than 25 nm and a spectral resolution of up to E/Delta E = 10000. The typical image field in TXM-NEXAFS measurements is about 10 mu m. 10 mu m, which is large compared to the individual nanoparticle. Therefore, one image stack already contains statistically significant data. In addition, the directional electric field vector ((E) over bar) of the x-rays can be used as a “search tool” for the direction of chemical bonds of the atom selected by its absorption edge.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000298672400103	Publication Date	2011-09-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	2	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:113071			Serial	3789
Permanent link to this record



	Author	Nasirpouri, F.; Engbarth, M.A.; Bending, S.J.; Peter, L.M.; Knittel, A.; Fangohr, H.; Milošević, M.V.
	Title	Three-dimensional ferromagnetic architectures with multiple metastable states			Type	A1 Journal article
	Year	2011	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	98	Issue	22	Pages	222506,1-222506,3
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We demonstrate controllable dual-bath electrodeposition of nickel on architecture-tunable three-dimensional (3D) silver microcrystals. Magnetic hysteresis loops of individual highly faceted Ag-Ni core-shell elements reveal magnetization reversal that comprises multiple sharp steps corresponding to different stable magnetic states. Finite-element micromagnetic simulations on smaller systems show several jumps during magnetization reversal which correspond to transitions between different magnetic vortex states. Structures of this type could be realizations of an advanced magnetic data storage architecture whereby each element represents one multibit, storing a combination of several conventional bits depending on the overall number of possible magnetic states associated with the 3D core-shell shape.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000291405700044	Publication Date	2011-06-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	8	Open Access
	Notes	; This work was supported by EPSRC in the U.K. under Grant Nos. EP/E039944/1 and EP/E040063/1, DYNAMAG project (EU FP7/2007-2013 Grant No. 233552), and FWO-Vlaanderen. ;			Approved	Most recent IF: 3.411; 2011 IF: 3.844
	Call Number	UA @ lucian @ c:irua:90008			Serial	3652
Permanent link to this record



	Author	Grodzinska, D.; Pietra, F.; van Huis, M.A.; Vanmaekelbergh, D.; de Mello Donegá, C.
	Title	Thermally induced atomic reconstruction of PbSe/CdSe core/shell quantum dots into PbSe/CdSe bi-hemisphere hetero-nanocrystals			Type	A1 Journal article
	Year	2011	Publication	Journal of materials chemistry	Abbreviated Journal	J Mater Chem
	Volume	21	Issue	31	Pages	11556-11565
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The properties of hetero-nanocrystals (HNCs) depend strongly on the mutual arrangement of the nanoscale components. In this work we have investigated the structural and morphological evolution of colloidal PbSe/CdSe core/shell quantum dots upon annealing under vacuum. Prior to annealing the PbSe core has an approximately octahedral morphology with eight {111} facets, and the CdSe shell has zinc-blende crystal structure. Thermal annealing under vacuum at temperatures between 150 °C and 200 °C induces a structural and morphological reconstruction of the HNCs whereby the PbSe core and the CdSe shell are reorganized into two hemispheres joined by a common {111} Se plane. This thermally induced reconstruction leads to considerable changes in the optical properties of the colloidal PbSe/CdSe HNCs.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000293190200018	Publication Date	2011-04-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0959-9428;1364-5501;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	44	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:91945			Serial	3632
Permanent link to this record



	Author	Bals, S.; Casavola, M.; van Huis, M.A.; Van Aert, S.; Batenburg, K.J.; Van Tendeloo, G.; Vanmaekelbergh, D.
	Title	Three-dimensional atomic imaging of colloidal core-shell nanocrystals			Type	A1 Journal article
	Year	2011	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	11	Issue	8	Pages	3420-3424
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Colloidal coreshell semiconductor nanocrystals form an important class of optoelectronic materials, in which the exciton wave functions can be tailored by the atomic configuration of the core, the interfacial layers, and the shell. Here, we provide a trustful 3D characterization at the atomic scale of a free-standing PbSe(core)CdSe(shell) nanocrystal by combining electron microscopy and discrete tomography. Our results yield unique insights for understanding the process of cation exchange, which is widely employed in the synthesis of coreshell nanocrystals. The study that we present is generally applicable to the broad range of colloidal heteronanocrystals that currently emerge as a new class of materials with technological importance.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000293665600062	Publication Date	2011-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	121	Open Access
	Notes	Esteem 026019; Fwo			Approved	Most recent IF: 12.712; 2011 IF: 13.198
	Call Number	UA @ lucian @ c:irua:91263			Serial	3643
Permanent link to this record



	Author	Batenburg, K.J.; Bals, S.; Van Aert, S.; Roelandts, T.; Sijbers, J.
	Title	Ultra-high resolution electron tomography for materials science : a roadmap			Type	A1 Journal article
	Year	2011	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	17	Issue	S:2	Pages	934-935
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos		Publication Date	2011-10-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record
	Impact Factor	1.891	Times cited		Open Access
	Notes				Approved	Most recent IF: 1.891; 2011 IF: 3.007
	Call Number	UA @ lucian @ c:irua:96554			Serial	3792
Permanent link to this record



	Author	Schattschneider, P.; Verbeeck, J.
	Title	Theory of free electron vortices			Type	A1 Journal article
	Year	2011	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	111	Issue	9/10	Pages	1461-1468
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The recent creation of electron vortex beams and their first practical application motivates a better understanding of their properties. Here, we develop the theory of free electron vortices with quantized angular momentum, based on solutions of the Schrödinger equation for cylindrical boundary conditions. The principle of transformation of a plane wave into vortices with quantized angular momentum, their paraxial propagation through round magnetic lenses, and the effect of partial coherence are discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000300461200002	Publication Date	2011-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	57	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 2.843; 2011 IF: 2.471
	Call Number	UA @ lucian @ c:irua:91882			Serial	3617
Permanent link to this record



	Author	de Backer, A.; Van Aert, S.; van Dyck, D.
	Title	High precision measurements of atom column positions using model-based exit wave reconstruction			Type	A1 Journal article
	Year	2011	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	111	Issue	9/10	Pages	1475-1482
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	In this paper, it has been investigated how to measure atom column positions as accurately and precisely as possible using a focal series of images. In theory, it is expected that the precision would considerably improve using a maximum likelihood estimator based on the full series of focal images. As such, the theoretical lower bound on the variances of the unknown atom column positions can be attained. However, this approach is numerically demanding. Therefore, maximum likelihood estimation has been compared with the results obtained by fitting a model to a reconstructed exit wave rather than to the full series of focal images. Hence, a real space model-based exit wave reconstruction technique based on the channelling theory is introduced. Simulations show that the reconstructed complex exit wave contains the same amount of information concerning the atom column positions as the full series of focal images. Only for thin samples, which act as weak phase objects, this information can be retrieved from the phase of the reconstructed complex exit wave.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000300461200004	Publication Date	2011-07-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	8	Open Access
	Notes	Fwo			Approved	Most recent IF: 2.843; 2011 IF: 2.471
	Call Number	UA @ lucian @ c:irua:91879			Serial	1438
Permanent link to this record



	Author	Cools, J.; Broekx, S.; Vandenberghe, V.; Seuntjens, P.; e.a.
	Title	Coupling a hydrological water quality model and an economic optimization model to set up a cost-effective emission reduction scenario for nitrogen			Type	A1 Journal article
	Year	2011	Publication	Environmental modelling and software	Abbreviated Journal
	Volume	26	Issue	1	Pages	44-51
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	A modelling approach is presented that determines the most cost-effective set of reduction measures to reach an in-stream concentration target. The framework is based on the coupling of two models: the hydrological water quality model SWAT and an economic optimization model (Environmental Costing Model, ECM). SWAT is used to determine the relationship between the modelled in-stream concentration at the river basin outlet and the associated emission reduction. The ECM is used to set up marginal abatement cost curves for nutrients and oxygen demanding substances. Results for nitrogen are presented for the Grote Nete river basin in Belgium for the year 2006. Results show that the good status for total nitrogen can be reached in the study area. The most cost-effective measures are more productive dairy cattle, implementing basic measures as defined in the WFD, winter cover crops, improved efficiency of WWTP, enhanced fodder efficiency for pigs, further treatment of industrial waste water and tuned fertilization. (C) 2010 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000283891600007	Publication Date	2010-05-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1364-8152	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:95529			Serial	7740
Permanent link to this record



	Author	Van Grieken, R.; Worobiec, A.
	Title	X-ray spectrometry for preventive conservation of cultural heritage			Type	A1 Journal article
	Year	2011	Publication	Pramåna: a journal of physics	Abbreviated Journal
	Volume	72	Issue	2	Pages	191-200
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation); Laboratory Experimental Medicine and Pediatrics (LEMP)
	Abstract	Analytical chemistry does play a key role in the chemical characterization of the environment and it appears that X-ray spectrometry, in its many forms, is one of the most relevant analytical techniques in preventive conservation, as it is in cultural heritage research in general. X-ray spectrometry has indeed been the method of choice for the characterization of the inorganic composition of atmospheric aerosols, for a long time. We have, over the last decade, intensively used various forms of X-ray spectrometry, viz., mostly energy-dispersive X-ray fluorescence, e.g. with polarized high-energy beam excitation, and automated electron probe X-ray microanalysis, together with other techniques, to identify particle types and their sources in indoor environments, including museums, while gaseous indoor pollutants were assessed using passive diffusion samplers. In each case, both bulk aerosols and individual aerosol particles were studied. For microanalysis of single particles, we have investigated a dozen techniques, but for wide, real-life applications, automated electron probe X-ray microanalysis is the most rewarding. We have first studied atmospheric aerosols in and around the Correr Museum in Venice, many other museums in Austria, Japan and England, and in the caves with prehistoric rock paintings in Altamira, Spain. Very recently, measurements were done in the Metropolitan Museum of Art in New York and theWawel Castle in Cracow, in Italian and Polish mountain churches, in a number of museums in Belgium and the Netherlands, and in cathedrals with medieval stained glass windows. In the Correr museum, it appeared that the particles most threatening for the Bellini paintings were released by the deteriorating plaster renderings, and this could be avoided by simply improving the rendering on the museum walls. In the Wawel Castle, outdoor pollution particles, like fine soot from diesel traffic, entering via leaks in the windows and doors, and also street-deicing salts and coal burning pollution particles, brought in by visitors, mostly in winter, were found to be most worrisome. Urgent questions that are not solved at this moment pertain to the deposition processes from the atmosphere to the cultural heritage items, the critical surface interactions that take place on these items, and the establishment of suitable particle concentration standards.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000288861000002	Publication Date	2011-05-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-4289; 0973-7111	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:87025			Serial	8785
Permanent link to this record



	Author	Verbeeck, J.; Schattschneider, P.; Lazar, S.; Stöger-Pollach, M.; Löffler, S.; Steiger-Thirsfeld, A.; Van Tendeloo, G.
	Title	Atomic scale electron vortices for nanoresearch			Type	A1 Journal article
	Year	2011	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	99	Issue	20	Pages	203109-203109,3
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Electron vortex beams were only recently discovered and their potential as a probe for magnetism in materials was shown. Here we demonstrate a method to produce electron vortex beams with a diameter of less than 1.2 Å. This unique way to prepare free electrons to a state resembling atomic orbitals is fascinating from a fundamental physics point of view and opens the road for magnetic mapping with atomic resolution in an electron microscope.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000297786500058	Publication Date	2011-11-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	90	Open Access
	Notes	Hercules			Approved	Most recent IF: 3.411; 2011 IF: 3.844
	Call Number	UA @ lucian @ c:irua:93625UA @ admin @ c:irua:93625			Serial	184
Permanent link to this record



	Author	Peirs, J.; Verleysen, P.; Tirry, W.; Rabet, L.; Schryvers, D.; Degrieck, J.
	Title	Dynamic shear localization in Ti6Al4V			Type	P1 Proceeding
	Year	2011	Publication	Procedia Engineering T2 – 11th International Conference on the Mechanical Behavior of Materials, (ICM), 2011, Como, ITALY (ICM11)	Abbreviated Journal
	Volume		Issue		Pages	1-6
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract	The alloy Ti6Al4V is known to be prone to the formation of adiabatic shear bands when dynamically loaded in shear. This causes a catastrophic decrease of the load carrying capacity and is usually followed by fracture. Although, the main mechanism is recognized to be the competition between strain hardening and thermal softening, a detailed understanding of the role of microstructural plasticity mechanisms and macroscopic loading conditions does not exist yet. To study strain localization and shear fracture, different high strain rate shear tests have been carried out: compression of hat-shaped specimens, torsion of thin walled tubular specimens and in-plane shear tests. The value of the three techniques in studying shear localization is evaluated. Post-mortem analysis of the fracture surface and the materials' microstructure is performed with optical and electron microscopy. In all cases a ductile fracture is observed. SEM and TEM techniques are used to study the local microstructure and composition in the shear band and as such the driving mechanism for the ASB formation. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of ICM11
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000300451302060	Publication Date	2011-06-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume	10	Series Issue		Edition
	ISSN	1877-7058;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	4	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:113069			Serial	767
Permanent link to this record



	Author	Sébilleau, D.; Natoli, C.; Gavaza, G.M.; Zhao, H.; da Pieve, F.; Hatada, K.
	Title	MsSpec-1.0 : a multiple scattering package for electron spectroscopies in material science			Type	A1 Journal article
	Year	2011	Publication	Computer physics communications	Abbreviated Journal	Comput Phys Commun
	Volume	182	Issue	12	Pages	2567-2579
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We present a multiple scattering package to calculate the cross-section of various spectroscopies namely photoelectron diffraction (PED), Auger electron diffraction (AED), X-ray absorption (XAS), low-energy electron diffraction (LEED) and Auger photoelectron coincidence spectroscopy (APECS). This package is composed of three main codes, computing respectively the cluster, the potential and the cross-section. In the latter case, in order to cover a range of energies as wide as possible, three different algorithms are provided to perform the multiple scattering calculation: full matrix inversion, series expansion or correlation expansion of the multiple scattering matrix. Numerous other small Fortran codes or bash/csh shell scripts are also provided to perform specific tasks. The cross-section code is built by the user from a library of subroutines using a makefile.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000295769700014	Publication Date	2011-07-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0010-4655;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.936	Times cited	6	Open Access
	Notes				Approved	Most recent IF: 3.936; 2011 IF: 3.268
	Call Number	UA @ lucian @ c:irua:93288			Serial	2208
Permanent link to this record



	Author	Van Aert, S.
	Title	Atomen in 3D : Antwerpenaren brengen atomaire structuur nanodeeltjes in beeld			Type	Newspaper/Magazine/blog article
	Year	2011	Publication	Chemie magazine	Abbreviated Journal
	Volume	7	Issue	3	Pages	9
	Keywords	Newspaper/Magazine/blog article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0379-7651	ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:94122			Serial	163
Permanent link to this record



	Author	Brauns, E.; van Hoof, E.; Huyskens, C.; de Wever, H.
	Title	On the concept of a supervisory, fuzzy set logic based, advanced filtration control in membrane bioreactors			Type	A1 Journal article
	Year	2011	Publication	Desalination and water treatment	Abbreviated Journal
	Volume	29	Issue	1/3	Pages	119-127
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The filtration process within a membrane bioreactor (MBR) is mostly controlled in a classic way through typical set-points such as aeration flow rate, filtration duration, backwash frequency or relaxation duration. The values of these filtration set-points result from experience and remain often unchanged during the installations operational lifetime. Filtration is dictated considerably by membrane fouling phenomena. The fouling potential of the mixed liquor however can significantly fluctuate, even daily, from changing influent characteristics. Fixed set-point values thus may represent sub-optimal filtration conditions. Consequently, a supervising advanced control system, being able to continuously adapt the set-points values would be beneficial regarding the MBR filtration process optimization. Such optimization could reduce the corresponding MBR energy consumption, e.g. linked to the filtration related membrane aeration. An Advanced Control System (ACS) based on Fuzzy Set Logic (FSL) is introduced here, enabling to supervise an existing classic membrane filtration control system. Such ACS is able to daily (or even more frequent) optimize the set-points of the underlying classic control system, from the input of various sensor and process parameter values. The theoretical background and practical implementation of the FSL based ACS concept is explained.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000291314400014	Publication Date	2011-06-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1944-3994; 1944-3986	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:90094			Serial	8328
Permanent link to this record



	Author	Delville, R.; Malard, B.; Pilch, J.; Sittner, P.; Schryvers, D.
	Title	Transmission electron microscopy study of microstructural evolution in nanograined Ni-Ti microwires heat treated by electric pulse			Type	A1 Journal article
	Year	2011	Publication	Diffusion and defect data : solid state data : part B : solid state phenomena	Abbreviated Journal
	Volume	172/174	Issue		Pages	682-687
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Transmission electron microscopy and mechanical testing were employed to investigate the evolution of microstructure and functional superelastic properties of 0.1mm diameter as-drawn Ni-Ti wires subjected to a non-conventional heat treatment by controlled electric pulse current. This method enables a finer control of the recovery and recrystallisation processes taking place during the heat treatment and accordingly a better control on the final microstructure. The best functional properties were obtained for heat-treated Ni-Ti wires having a nanograined microstructure (20-50 nm) partially recovered through polygonization and partially recrystallized. Such microstructure is highly resistant against dislocation slip upon cycling, while microstructures annealed for longer time and showing mostly recrystallized grains were prone to dislocation slip, particularly as the grain size exceeds 100 nm. The density of dislocation defects increased significantly with increasing grain size of the microstructure. The activity of three <100>/{011} slip systems was identified in the largest grains of 500-1200 nm. An additional mode of plastic deformation, {114} compound austenite twinning, was observed in the largest grains of fully recrystallized microstructures. It is proposed that dislocation slip (and possibly deformation twinning) occurring in superelastic cycling is coupled with the stress-induced martensitic transformation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Vaduz	Editor
	Language		Wos	000303359700105	Publication Date	2011-07-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-9779;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	3	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:90154			Serial	3717
Permanent link to this record



	Author	Schryvers, D.; Tirry, W.; Cao, S.
	Title	Advanced TEM and SEM methods applied to 3D nano- and microstructural investigations of Ni₄Ti₃ precipitates in Ni-Ti (SMA)			Type	A1 Journal article
	Year	2011	Publication	Diffusion and defect data : solid state data : part B : solid state phenomena	Abbreviated Journal
	Volume	172/174	Issue		Pages	229-235
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Two different kinds of experimental approaches yielding three-dimensional structural information on metastable semi-coherent precipitates are demonstrated. By combining high-resolution images from two independent viewing directions a full description of the strain field surrounding a nano-sized Ni4Ti3 precipitate in Ni-Ti can be obtained. The principal axes and strains correlate well with the transformation strain of the observed R-phase transformation close to the precipitate. Using a slice-and-view procedure in a FIB/SEM dual-beam instrument, a three-dimensional voxel dataset is produced from which morphological and distributional information on the same precipitates can be obtained yielding new insight into the particular transformation paths of these alloys, relevant for their functional behaviour.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Vaduz	Editor
	Language		Wos	000303359700036	Publication Date	2011-07-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-9779;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:90153			Serial	73
Permanent link to this record



	Author	Cao, S.; Nishida, M.; Schryvers, D.
	Title	FIB/SEM applied to quantitative 3D analysis of precipitates in Ni-Ti			Type	A1 Journal article
	Year	2011	Publication	Diffusion and defect data : solid state data : part B : solid state phenomena	Abbreviated Journal
	Volume	172/174	Issue		Pages	1284-1289
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Ni4Ti3 precipitates with a heterogeneous distribution growing in a polycrystalline Ni50.8Ti49.2 alloy have been investigated in a Dual-Beam FIB/SEM system. The volume ratio, mean volume, central plane diameter, thickness, aspect ratio and sphericity of the precipitates in the grain interior as well as near to the grain boundary were measured or calculated. The morphology of the precipitates was classified according to the Zingg scheme. The multistage martensitic transformation occurring in these kinds of samples is interpreted in view of the data of this heterogeneous microstructure of matrix and precipitates.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Vaduz	Editor
	Language		Wos	000303359700199	Publication Date	2011-07-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-9779;	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:90152			Serial	1188
Permanent link to this record



	Author	Delville, R.; Shi, H.; James, R.D.; Schryvers, D.
	Title	Special microstructures and twin features in Ti₅₀Ni_50-x(Pd,Au)_x at small hysteresis			Type	A1 Journal article
	Year	2011	Publication	Diffusion and defect data : solid state data : part B : solid state phenomena	Abbreviated Journal
	Volume	172/174	Issue		Pages	105-110
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The breaking of symmetry due to atomic displacements in the austenite-martensite phase transformation generally leads to their crystallographic incompatibility. Energy minimizing accommodation mechanisms such as martensite twinning have been recently shown to be a source of hysteresis and irreversible plastic deformation. Compatibility between the two phases can however be achieved by carefully tuning lattice parameters through composition change. A dramatic drop in hysteresis and novel microstructures such as a lowering of the amount of twin lamella are then observed. Related theoretical and simulation works also support the existence of such microstructures including peculiar self-accommodating configurations at near-compatibility. We present the transmission electron microscopy (TEM) study of these novel microstructures for the alloy systems Ti50Ni50-xPdx and Ti50Ni50-xAux where the composition was systemically tuned to approach perfect compatibility. High resolution imaging of the interface between austenite and martensite supplies evidences of compatibility at the atomic level.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Vaduz	Editor
	Language		Wos	000303359700016	Publication Date	2011-07-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-9779;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	3	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:90155			Serial	3069
Permanent link to this record



	Author	Bogaerts, A.; Aghaei, M.; Autrique, D.; Lindner, H.; Chen, Z.; Wendelen, W.
	Title	Computer simulations of laser ablation, plume expansion and plasma formation			Type	H1 Book chapter
	Year	2011	Publication		Abbreviated Journal
	Volume		Issue		Pages	1-10
	Keywords	H1 Book chapter; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	Trans Tech	Place of Publication	Aedermannsdorf	Editor
	Language		Wos	000292658900001	Publication Date	2011-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-8985;	ISBN	978-3-03785-081-7	Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	8	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:88340			Serial	470
Permanent link to this record



	Author	Pape, E.; Bezerra, T.N.; Vanneste, H.; Heeschen, K.; Moodley, L.; Leroux, F.; van Breugel, P.; Vanreusel, A.
	Title	Community structure and feeding preference of nematodes associated with methane seepage at the Darwin mud volcano (Gulf of Cádiz)			Type	A1 Journal article
	Year	2011	Publication	Marine ecology progress series	Abbreviated Journal	Mar Ecol Prog Ser
	Volume	438	Issue		Pages	71-83
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We sampled the Darwin mud volcano (MV) for meiofaunal community and trophic structure in relation to pore-water geochemistry along a 10 m transect from a seep site on the rim of the crater towards the MV slope. Pore-water profiles indicated considerable variation in upward methane (CH4) flow among sediment cores taken along the transect, with highest flux in the seep sediment core, gradually decreasing along the transect, to no CH4 flux in the core taken at a 5 m distance. Low sulphate concentrations and high levels of total alkalinity and sulphide (H2S) suggested that anaerobic oxidation of methane (AOM) occurred close to the sediment surface in the seep sediment core. High H2S levels had a genus- and species-specific impact on meiofaunal densities. Nematode genus composition varied gradually between sediment cores, with the genus Sabatieria dominating almost all sediment cores. However, genus diversity increased with increasing distance from the seep site. These limited data suggest that the community structure of seep meiofauna is highly dependent on local (a)biotic habitat characteristics, and a typical seep meiofaunal community cannot be delineated. Stable isotope values suggested the nematode diet up to 10 m from the seep site included thiotrophic carbon. The thicker hemipelagic sediment layer (photosynthetic carbon), the increased trophic diversity, and the heavier nematode δ13C farther from the seep site suggest a decrease in thiotrophy and an increase in photosynthetic carbon in the nematode diet.
	Address
	Corporate Author				Thesis
	Publisher	Inter-research	Place of Publication	Halstenbek	Editor
	Language		Wos	000295616000006	Publication Date	2011-07-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0171-8630;1616-1599;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.292	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 2.292; 2011 IF: 2.711
	Call Number	UA @ lucian @ c:irua:93682			Serial	414
Permanent link to this record



	Author	Bonroy, J.; Volckaert, M.; Seuntjens, P.
	Title	Rapid automated measurement system for simultaneous determination of effective air-filled porosity and soil gas diffusivity			Type	A1 Journal article
	Year	2011	Publication	Soil Science Society of America journal	Abbreviated Journal
	Volume	75	Issue	2	Pages	408-417
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The effective air-filled porosity and the gas diffusion coefficient are important soil parameters determining the success of soil bioremediation projects such as (bio)venting and (bio)sparging methods in combination with soil vapor extraction. We have developed a new method to sequentially measure the effective air-filled porosity and the soil gas diffusion coefficient of a soil sample. During the purging of the sample, a fast and accurate measurement of the effective air-filled porosity can be obtained. The subsequent diffusion measurement does not require a zero-O(2) concentration in the soil sample. The procedure further allows the calculation of the soil gas diffusion coefficient before an equilibrium O(2) concentration has been reached. The results are obtained by combining the data of the inlet and outlet compartment in a single equation. A stable reading is reached when the results for the inlet and outlet compartment coincide with the results from the combined equation. The analysis time is reduced by 89 to 96% compared with methods that run until an equilibrium concentration has been reached. Moreover, combining data from inlet and outlet compartments increases the accuracy of the diffusivity measurement by a factor of two compared with previous methods.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000288827000009	Publication Date	2012-09-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0361-5995	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:113062			Serial	8453
Permanent link to this record



	Author	Caratelli, D.; Gielis, J.; Natalini, P.; Ricci, P.E.; Tavkhelidze, I.
	Title	The Robin problem for the Helmholtz equation in a starlike planar domain			Type	A1 Journal article
	Year	2011	Publication	Georgian mathematical journal	Abbreviated Journal
	Volume	18	Issue	3	Pages	465-479
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	The interior and exterior Robin problems for the Helmholtz equation in starlike planar domains are addressed by using a suitable Fourier-like technique. Attention is in particular focused on normal-polar domains whose boundaries are defined by the so-called superformula introduced by J. Gielis. A dedicated numerical procedure based on the computer algebra system Mathematica© is developed in order to validate the proposed approach. In this way, highly accurate approximations of the solution, featuring properties similar to the classical ones, are obtained. The computed results are found to be in good agreement with the theoretical findings on Fourier series expansion presented by L. Carleson.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000296166100004	Publication Date	2021-02-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1072-947x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:91086			Serial	8658
Permanent link to this record



	Author	Esquivel, M.R.; Zelaya, E.
	Title	Synthesis and characterisation of lanthanide-based dioxide			Type	A1 Journal article
	Year	2011	Publication	Advances in applied ceramics	Abbreviated Journal	Adv Appl Ceram
	Volume	110	Issue	4	Pages	219-224
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	In the present work, the microstructure and structure of La(0.25)Ce(0.52)Nd(0.17)Pr(0.06)(OH)(3) and La(0.25)Ce(0.52)Nd(0.17)Pr(0.06)O(2) is obtained from transmission electron microscopy and X-ray diffraction measurements. Space group P6(3)/m is assigned to the structure of La(0.25)Ce(0.52)Nd(0.17)Pr(0.06)(OH)(3). Lanthanides are assigned to Wyckoff positions 2c. Cell parameters are a=6.375(5) angstrom and c=3.753(5) angstrom. The thermal decomposition of this compound was studied by differential scanning calorimetry. The process is exothermal with an enthalpy change Delta H degrees value of -254 +/- 10 kJ mol(-1). The decomposition kinetics is complex and two global processes with E(a) values of 98 +/- 4 and 61 +/- 2 kJ mol 21 were observed. The product is a lanthanide dioxide. Space group Fm3m is assigned to the La(0.25)Ce(0.52)Nd(0.17)Pr(0.06)O(2). Lanthanides are distributed in Wyckoff positions 4a. The cell parameter is a=5.479(5) angstrom. Nanopores in the oxide surface are obtained using this method and characterised by STEM measurements.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Leeds	Editor
	Language		Wos	000291206700006	Publication Date	2011-05-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1743-6753;1743-6761;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.325	Times cited	3	Open Access
	Notes				Approved	Most recent IF: 1.325; 2011 IF: 0.871
	Call Number	UA @ lucian @ c:irua:105588			Serial	3410
Permanent link to this record



	Author	Potgieter-Vermaak, S.S.; Mmari, A.; Van Grieken, R.; McCrindle, R.I.; Potgieter, J.H.
	Title	Degradation of galvanised iron roofing material in Tanzania by atmospheric corrosion			Type	A1 Journal article
	Year	2011	Publication	Corrosion engineering science and technology	Abbreviated Journal
	Volume	46	Issue	5	Pages	642-650
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	Galvanised iron is popular in many applications, particular as a roofing material. However, just like other materials, especially metallic ones, it is prone to degradation by corrosion. In this particular study, the degradation of galvanised roof sheets was investigated at a coastal, urban and rural site in Tanzania, Africa. Samples were exposed to various outdoor environments over a period of 3 years. In addition, some accelerated laboratory investigations were conducted in different simulated air pollution environments in an artificial corrosion chamber constructed for this purpose to supplement the outdoor exposure tests. It was found that the combination of the tropical climate and increasing air pollution due to industrial development in the capital Dar-es-Salaam resulted in substantial atmospheric corrosion of the roof sheets, which eventually leads to failure and the necessity for replacement. The rural site had the lowest degree of atmospheric corrosion as expected. A combination of different corrosion products was identified as a result of the atmospheric corrosion by Raman and EDX analyses. The information gained from this investigation could be utilised to construct more durable structures requiring less frequent replacement and maintenance in future.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000294421100008	Publication Date	2010-04-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-422x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:92094			Serial	7758
Permanent link to this record



	Author	Orlinskii, S.B.; Bogomolov, R.S.; Kiyamova, A.M.; Yavkin, B.V.; Mamin, G.M.; Turner, S.; Van Tendeloo, G.; Shiryaev, A.A.; Vlasov, I.I.; Shenderova, O.
	Title	Identification of substitutional nitrogen and surface paramagnetic centers in nanodiamond of dynamic synthesis by electron paramagnetic resonance			Type	A1 Journal article
	Year	2011	Publication	Nanoscience and nanotechnology letters	Abbreviated Journal	Nanosci Nanotech Let
	Volume	3	Issue	1	Pages	63-67
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Production of nanodiamond particles containing substitutional nitrogen is important for a wide variety of advanced applications. In the current work nanodiamond particles synthesized from a mixture of graphite and hexogen were analyzed to determine the presence of substitutional nitrogen using pulsed electron paramagnetic resonance (EPR) spectroscopy. Nitrogen paramagnetic centers in the amount of 1.2 ppm have been identified. The spin relaxation characteristics for both nitrogen and surface defects are also reported. A new approach for efficient depletion of the strong non-nitrogen EPR signal in nanodiamond material by immersing nanodiamond particles into ice matrix is suggested. This approach allows an essential decrease of the spin relaxation time of the dominant non-nitrogen defects, while preserving the substitutional nitrogen spin relaxation time.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000293211200012	Publication Date	2011-09-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1941-4900;1941-4919;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.889	Times cited	14	Open Access
	Notes				Approved	Most recent IF: 1.889; 2011 IF: 0.528
	Call Number	UA @ lucian @ c:irua:91943			Serial	1548
Permanent link to this record



	Author	Ding, F.; Li, B.; Akopian, N.; Perinetti, U.; Chen, Y.H.; Peeters, F.M.; Rastelli, A.; Zwiller, V.; Schmidt, O.G.
	Title	Single neutral excitons confined in AsBr₃ in situ etched InGaAs quantum rings			Type	A1 Journal article
	Year	2011	Publication	Journal of nanoelectronics and optoelectronics	Abbreviated Journal	J Nanoelectron Optoe
	Volume	6	Issue	1	Pages	51-57
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT)
	Abstract	We observe the evolution of single self-assembled semiconductor quantum dots into quantum rings during AsBr3 in situ etching. The direct three-dimensional imaging of In(Ga)As nanostructures embedded in GaAs matrix is demonstrated by selective wet chemical etching combined with atomic force microscopy. Single neutral excitons confined in these quantum rings are studied by magneto-photoluminescence. Oscillations in the exciton radiative recombination energy and in the emission intensity are observed under an applied magnetic field. Further, we demonstrate that the period of the oscillations can be tuned by a gate potential that modifies the exciton confinement. The experimental results, combined with calculations, indicate that the exciton Aharonov-Bohm effect may account for the observed effects.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000290692200005	Publication Date	2011-04-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1555-130X;1555-1318;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	0.497	Times cited	3	Open Access
	Notes	; We acknowledge L. P. Kouwenhoven and Z. G. Wang for support, C. C. Bof Bufon, C. Deneke, V. Fomin, A. Govorov, S. Kiravittaya, and Wen-Hao Chang for their help and discussions. We are grateful for the financial support of NWO (VIDI), the CAS-MPG programm, the DFG (FOR730), BMBF (No. 01BM459), NSFC China (60625402), and Flemish Science Foundation (FWO-V1). ;			Approved	Most recent IF: 0.497; 2011 IF: 0.556
	Call Number	UA @ lucian @ c:irua:90187			Serial	3025
Permanent link to this record



	Author	Yang, W.; Nelissen, K.; Kong, M.H.; Li, Y.T.; Tian, Y.M.
	Title	Melting properties of two-dimensional multi-species colloidal systems in a parabolic trap			Type	A1 Journal article
	Year	2011	Publication	European physical journal : B : condensed matter and complex systems	Abbreviated Journal	Eur Phys J B
	Volume	83	Issue	4	Pages	499-505
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	The angular and radial melting properties of two-dimensional classical systems consisting of different types of particles confined in a parabolic trap are studied through modified Monte Carlo simulations. A universal behavior of the angular melting process is found, which occurs in multiple steps due to shell depended melting temperatures. The melting sequence of the different shells is determined by two major factors: (1) the confinement strength which each shell is subjected to, and (2) the specific structure of each shell. Further, a continuous radial disordering of the particle types forming a single circular shell is found and analyzed. This phenomenon has never been observed before in two-dimensional mono-dispersive systems. This continuous radial disordering results from the high energy barrier between different particle types in multi-species systems.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Berlin	Editor
	Language		Wos	000296633700013	Publication Date	2011-10-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1434-6028;1434-6036;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.461	Times cited	2	Open Access
	Notes	; This work was supported by the National Natural Science Foundation of China under Grant No. 11047111, the Major State Basic Research Development Program of China (973) under Grant No. 2009CB724201, the Key Science and Technology Program of Shanxi Province of China under Grant No. 20090321085, the Doctors' Initial Foundation of Taiyuan University of Science and Technology under Grant No. 20092010, the Youth Foundation of Taiyuan University of Science and Technology under Grant No. 20113020, the FWO-Vl (Belgium) and CNPq (Brazil). Part of the calculations were carried out using the CalcUA core facility of Universiteit Antwerpen (Belgium), a division of Flemish Supercomputer Center VSC, and in the Center for Computational Science of CASHIPS (China). ;			Approved	Most recent IF: 1.461; 2011 IF: 1.534
	Call Number	UA @ lucian @ c:irua:93589			Serial	1989
Permanent link to this record



	Author	Verberck, B.; Tarakina, N.V.
	Title	Tubular fullerenes inside carbon nanotubes : optimal molecular orientation versus tube radius			Type	A1 Journal article
	Year	2011	Publication	European physical journal : B : condensed matter and complex systems	Abbreviated Journal	Eur Phys J B
	Volume	80	Issue	3	Pages	355-362
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
	Abstract	We present an investigation of the orientations and positions of tubular fullerene molecules (C90, ..., C200) encapsulated in single-walled carbon nanotubes (SWCNT), a series of so-called fullerene nanopeapods. We find that increasing the tube radius leads to the following succession of energetically stable regimes: (1) lying molecules positioned on the tube's long axis; (2) tilted molecules on the tube's long axis; and (3) lying molecules shifted away from the tube's long axis. As opposed to C70 and C80 molecules encapsulated in a SWCNT, standing orientations do not develop. Our results are relevant for the possible application of molecular-orientation-dependent electronic properties of fullerene nanopeapods, and also for the interpretation of future experiments on double-walled carbon nanotube formation by annealing fullerene peapod systems.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Berlin	Editor
	Language		Wos	000289576200010	Publication Date	2011-03-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1434-6028;1434-6036;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.461	Times cited	10	Open Access
	Notes	; This work was financially supported by the Research Foundation – Flanders (FWO-VI). B.V. is a Postdoctoral Fellow of the Research Foundation – Flanders (FWO-VI). ;			Approved	Most recent IF: 1.461; 2011 IF: 1.534
	Call Number	UA @ lucian @ c:irua:89286			Serial	3738
Permanent link to this record



	Author	Cantoro, M.; Klekachev, A.V.; Nourbakhsh, A.; Sorée, B.; Heyns, M.M.; de Gendt, S.
	Title	Long-wavelength, confined optical phonons in InAs nanowires probed by Raman spectroscopy			Type	A1 Journal article
	Year	2011	Publication	European physical journal : B : condensed matter and complex systems	Abbreviated Journal	Eur Phys J B
	Volume	79	Issue	4	Pages	423-428
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Strongly confined nano-systems, such as one-dimensional nanowires, feature deviations in their structural, electronic and optical properties from the corresponding bulk. In this work, we investigate the behavior of long-wavelength, optical phonons in vertical arrays of InAs nanowires by Raman spectroscopy. We attribute the main changes in the spectral features to thermal anharmonicity, due to temperature effects, and rule out the contribution of quantum confinement and Fano resonances. We also observe the appearance of surface optical modes, whose details allow for a quantitative, independent estimation of the nanowire diameter. The results shed light onto the mechanisms of lineshape change in low-dimensional InAs nanostructures, and are useful to help tailoring their electronic and vibrational properties for novel functionalities.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Berlin	Editor
	Language		Wos	000288120600005	Publication Date	2011-02-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1434-6028;1434-6036;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.461	Times cited	10	Open Access
	Notes	; ;			Approved	Most recent IF: 1.461; 2011 IF: 1.534
	Call Number	UA @ lucian @ c:irua:89502			Serial	1841
Permanent link to this record