NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	301–330 of 336 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 >>

List View

Citations

Details

	Records
	Author	Montoya, E.; Bals, S.; Rossell, M.D.; Schryvers, D.; Van Tendeloo, G.
	Title	Evaluation of top, angle, and side cleaned FIB samples for TEM analysis			Type	A1 Journal article
	Year	2007	Publication	Microscopy research and technique	Abbreviated Journal	Microsc Res Techniq
	Volume	70	Issue	12	Pages	1060-1071
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	ITEM specimens of a LaAlO3/SrTiO3 multilayer are prepared by FIB with internal lift out. Using a Ga+1 beam of 5 kV, a final cleaning step yielding top, top-angle, side, and bottom-angle cleaning is performed. Different cleaning procedures, which can be easily implemented in a dual beam FIB system, are described and compared; all cleaning types produce thin lamellae, useful for HRTEM and HAADF-STEM work up to atomic resolution. However, the top cleaned lamellae are strongly affected by the curtain effect. Top-angle cleaned specimens show an amorphous layer of around 5 nm at the specimen surfaces, due to damage and redeposition. Furthermore, it is observed that the LaAlO3 layers are preferentially destroyed and transformed into amorphous material, during the thinning process.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000251868200008	Publication Date	2007-08-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1059-910X;1097-0029;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.147	Times cited	36	Open Access
	Notes	Aip; Fwo			Approved	Most recent IF: 1.147; 2007 IF: 1.644
	Call Number	UA @ lucian @ c:irua:67282			Serial	1090
Permanent link to this record



	Author	Potapov, P.; Shelyakov, A.; Schryvers, D.
	Title	On the crystal structure of TiNi-Cu martensite			Type	A1 Journal article
	Year	2001	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	44	Issue		Pages	1-7
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000166808100001	Publication Date	2002-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	36	Open Access
	Notes				Approved	Most recent IF: 3.747; 2001 IF: 1.130
	Call Number	UA @ lucian @ c:irua:48378			Serial	2433
Permanent link to this record



	Author	Srivastava, A.K.; Schryvers, D.; van Humbeeck, J.
	Title	Grain growth and precipitation in an annealed cold-rolled Ni_50.2Ti_49.8 alloy			Type	A1 Journal article
	Year	2007	Publication	Intermetallics	Abbreviated Journal	Intermetallics
	Volume	15	Issue	12	Pages	1538-1547
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Chicago, Ill.	Editor
	Language		Wos	000250930300006	Publication Date	2007-08-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0966-9795;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.14	Times cited	37	Open Access
	Notes	FWO project G.0465.05; EU RTN			Approved	Most recent IF: 3.14; 2007 IF: 2.219
	Call Number	UA @ lucian @ c:irua:65851			Serial	1363
Permanent link to this record



	Author	Schryvers, D.
	Title	Microtwin sequences in thermoelastic Ni_xAl_100-x martensite studied by conventional and high resolution transmission electron microscopy			Type	A1 Journal article
	Year	1993	Publication	Philosophical magazine: A: physics of condensed matter: defects and mechanical properties	Abbreviated Journal
	Volume	68	Issue		Pages	1017-1032
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	A1993MF59100016	Publication Date	2007-07-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0141-8610;1460-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	37	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:6779			Serial	2079
Permanent link to this record



	Author	Colla, M.-S.; Wang, B.; Idrissi, H.; Schryvers, D.; Raskin, J.-P.; Pardoen, T.
	Title	High strength-ductility of thin nanocrystalline palladium films with nanoscale twins : on-chip testing and grain aggregate model			Type	A1 Journal article
	Year	2012	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	60	Issue	4	Pages	1795-1806
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The mechanical behaviour of thin nanocrystalline palladium films with an ∼30 nm in plane grain size has been characterized on chip under uniaxial tension. The films exhibit a large strain hardening capacity and a significant increase in the strength with decreasing thickness. Transmission electron microscopy has revealed the presence of a moderate density of growth nanotwins interacting with dislocations. A semi-analytical grain aggregate model is proposed to investigate the impact of different contributions to the flow behaviour, involving the effect of twins, of grain size and of the presence of a thin surface layer. This model provides guidelines to optimizing the strength/ductility ratio of the films.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000301989500035	Publication Date	2012-02-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	38	Open Access
	Notes	Iap			Approved	Most recent IF: 5.301; 2012 IF: 3.941
	Call Number	UA @ lucian @ c:irua:94213			Serial	1465
Permanent link to this record



	Author	Salje, E.K.H.; Zhang, H.; Idrissi, H.; Schryvers, D.; Carpenter, M.A.; Moya, X.; Planes, A.
	Title	Mechanical resonance of the austenite/martensite interface and the pinning of the martensitic microstructures by dislocations in Cu_74.08Al_23.13Be_2.79			Type	A1 Journal article
	Year	2009	Publication	Physical review: B: condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	80	Issue	13	Pages	134114,1-1134114,8
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A single crystal of Cu74.08Al23.13Be2.79 undergoes a martensitic phase transition at 246 and 232 K under heating and cooling, respectively. The phase fronts between the austenite and martensite regions of the sample are weakly mobile with a power-law resonance under external stress fields. Surprisingly, the martensite phase is elastically much harder than the austenite phase showing that interfaces between various crystallographic variants are strongly pinned and cannot be moved by external stress while the phase boundary between the austenite and martensite regions in the sample remains mobile. This unusual behavior was studied by dynamical mechanical analysis (DMA) and resonant ultrasound spectroscopy. The remnant strain, storage modulus, and internal friction were recorded simultaneously for different applied forces in DMA. With increasing forces, the remnant strain increases monotonously while the internal friction peak height shows a minimum at 300 mN. Transmission electron microscopy shows that the pinning is generated by dislocations which are inherited from the austenite phase.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000271351300033	Publication Date	2009-10-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	38	Open Access
	Notes	Multimat			Approved	Most recent IF: 3.836; 2009 IF: 3.475
	Call Number	UA @ lucian @ c:irua:78542			Serial	1975
Permanent link to this record



	Author	Tian, H.; Schryvers, D.; Liu, D.; Jiang, Q.; van Humbeeck, J.
	Title	Stability of Ni in nitinol oxide surfaces			Type	A1 Journal article
	Year	2011	Publication	Acta biomaterialia	Abbreviated Journal	Acta Biomater
	Volume	7	Issue	2	Pages	892-899
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The stability of Ni in titanium oxide surface layers on nitinol wires known to release certain amounts of Ni was investigated by first principles density functional theory and transmission electron microscopy. The oxides were identified as a combination of TiO and TiO2 depending on the thickness of the layer. The calculations indicate that free Ni atoms can exist in TiO at ambient temperature while Ni particles form in TiO2, which was confirmed by the transmission electron microscopy observations. The results are discussed with respect to surface stability and Ni release due to free Ni atoms and Ni particles.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	S.l.	Editor
	Language		Wos	000286707700047	Publication Date	2010-09-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1742-7061;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.319	Times cited	39	Open Access
	Notes	Fwo			Approved	Most recent IF: 6.319; 2011 IF: 4.865
	Call Number	UA @ lucian @ c:irua:85998			Serial	3128
Permanent link to this record



	Author	Goessens, C.; Schryvers, D.; van Landuyt, J.; Amelinckx, S.; Verbeeck, A.; de Keyzer, R.
	Title	Characterization of crystal defects in mixed tabular silver halide grains by conventional transmission electron microscopy and X-ray diffractometry			Type	A1 Journal article
	Year	1991	Publication	Journal of crystal growth	Abbreviated Journal	J Cryst Growth
	Volume	110	Issue		Pages	930-941
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1991FL02100033	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-0248	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.698	Times cited	40	Open Access
	Notes				Approved
	Call Number	UA @ lucian @ c:irua:48349			Serial	321
Permanent link to this record



	Author	Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J.
	Title	On the stress state dependence of the twinning rate and work hardening in twinning-induced plasticity steels			Type	A1 Journal article
	Year	2012	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	66	Issue	12	Pages	966-971
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The influence of the stress state on the twinning rate and work hardening is studied in the case of an FeMnC TWIP steel strained in uniaxial tension, simple shear and rolling. The resulting stressstrain responses exhibit marked differences. The twinning rate, number of activated twinning systems in each grain, twin thickness and transmission of twins across grain boundaries are dependent on the imposed stress state during straining. Relationships between twin features and macroscopic work hardening rate are established.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000304641500004	Publication Date	2012-02-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	41	Open Access
	Notes	Iap			Approved	Most recent IF: 3.747; 2012 IF: 2.821
	Call Number	UA @ lucian @ c:irua:98374			Serial	2454
Permanent link to this record



	Author	Tang, Y.; Chen, Z.; Borbely, A.; Ji, G.; Zhong, S.Y.; Schryvers, D.; Ji, V.; Wang, H.W.
	Title	Quantitative study of particle size distribution in an in-situ grown Al-TiB2 composite by synchrotron X-ray diffraction and electron microscopy			Type	A1 Journal article
	Year	2015	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	102	Issue	102	Pages	131-136
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Synchrotron X-ray diffraction and transmission electron microscopy (TEM) were applied to quantitatively characterize the average particle size and size distribution of free-standing TiB2 particles and TiB2 particles in an insitu grown Al–TiB2 composite. The detailed evaluations were carried out by X-ray line profile analysis using the restrictedmoment method and multiplewhole profile fitting procedure (MWP). Both numericalmethods indicate that the formed TiB2 particles are well crystallized and free of crystal defects. The average particle size determined from different Bragg reflections by the restricted moment method ranges between 25 and 55 nm, where the smallest particle size is determined using the 110 reflection suggesting the highest lateral-growth velocity of (110) facets. TheMWP method has shown that the in-situ grown TiB2 particles have a very low dislocation density (~1011 m−2) and their size distribution can be described by a log-normal distribution. Good agreement was found between the results obtained from the restricted moment and MWP methods, which was further confirmed by TEM.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000355335200017	Publication Date	2015-03-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	41	Open Access
	Notes	This work is financially supported by the National Natural Science Foundation of China (Grant No. 51201099 and No. 51301108) and the China Postdoctoral Science Foundation (Grant No. 2013T60443 and No. 2012M520891). The authors are grateful for the project 2013BB03 supported by NPL, CAEP. Many thanks are also due to the faculty of BL14B beamline at the Shanghai Synchrotron Radiation Facility for their help on synchrotron experiments.			Approved	Most recent IF: 2.714; 2015 IF: 1.845
	Call Number	c:irua:126443			Serial	2764
Permanent link to this record



	Author	Jembrih-Simbürger, D.; Neelmeijer, C.; Schalm, O.; Fredrickx, P.; Schreiner, M.; De Vis, K.; Mäder, M.; Schryvers, D.; Caen, J.
	Title	The colour of silver stained glass : analytical investigations carried out with XRF, SEM/EDX, TEM and IBA			Type	A1 Journal article
	Year	2002	Publication	Journal of analytical atomic spectrometry	Abbreviated Journal	J Anal Atom Spectrom
	Volume	17	Issue		Pages	321-328
	Keywords	A1 Journal article; Art; Electron microscopy for materials research (EMAT); AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	Glass treated on its surface with silver compounds and an aluminosilicate, such as ochre or clay, at higher temperatures (between 550 and 650 °C) accepts a wide variety of a yellow colour. It is the aim of this study to investigate the parameters of the manufacturing process affecting the final colour of silver stained glass and to correlate them with the final colour and colour intensity. Therefore, defined mixtures of ochre and a silver compound (AgCl, AgNO3, Ag2SO4, Ag3PO4, Ag2O) were prepared and applied on soda-lime glass. The firing process was modified within the range from 563 to 630 °C and glass samples were analysed after treatment with energy dispersive X-ray fluorescence analysis (EDXRF), scanning electron microscopy (SEM/EDX), transmission electron microscopy (TEM), as well as ion beam analysis (IBA) with an external beam. Within the scope of IBA simultaneous measurements using particle-induced X-ray emission (PIXE), particle-induced gamma-ray emission (PIGE), and Rutherford backscattering spectrometry (RBS) were carried out in order to obtain the thickness of the Ag-rich surface layer and the depth distribution of Ag. By means of TEM the microstructure of the silver particles was visualised. XRF results show that the lowest amount of Ag could be detected on glass samples treated with silver stain mixtures containing AgCl and Ag2O. A low kiln temperature (e.g. 563 °C) results in a higher silver concentration at the surface and lower penetration depths. Furthermore, the results obtained with SEM/EDX at cross-sections of the glass samples could be confirmed by PIXE, PIGE, RBS, and TEM.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000175158900001	Publication Date	2002-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0267-9477;1364-5544;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.379	Times cited	42	Open Access
	Notes				Approved	Most recent IF: 3.379; 2002 IF: 4.250
	Call Number	UA @ lucian @ c:irua:48775			Serial	395
Permanent link to this record



	Author	Ghidelli, M.; Idrissi, H.; Gravier, S.; Blandin, J.-J.; Raskin, J.-P.; Schryvers, D.; Pardoen, T.
	Title	Homogeneous flow and size dependent mechanical behavior in highly ductile Zr 65 Ni 35 metallic glass films			Type	A1 Journal article
	Year	2017	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	131	Issue	131	Pages	246-259
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Motivated by recent studies demonstrating a high strength – high ductility potential of nano-scale metallic glass samples, the mechanical response of freestanding Zr65Ni35 film with sub-micron thickness has been investigated by combining advanced on-chip tensile testing and electron microscopy. Large deformation up to 15% is found for specimen thicknesses below 500 nm with variations depending on specimen size and frame compliance. The deformation is homogenous until fracture, with no evidence of shear banding. The yield stress is doubled when decreasing the specimen cross-section, reaching ~3 GPa for small cross-sections. The fracture strain variation is related to both the stability of the test device and to the specimen size. The study concludes on clear disconnect between the mechanisms controlling the onset of plasticity and the fracture process.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000402343400023	Publication Date	2017-03-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	42	Open Access	OpenAccess
	Notes	This work has been funded by the Belgian Science Policy through the IAP 7/21 project. We acknowledge IDS-FunMat for the PhD financial support.We thank the Renatech network and the PTA (Plateforme Technologique Amont) in Grenoble (France) for TFMG deposition facilities. The WINFAB infrastructure at the UCL and the help of R. Vayrette and M. Coulombier for the on-chip tests. H. Idrissi is currently mandated by the Belgian National Fund for Scientific Research (FSR-FNRS).			Approved	Most recent IF: 5.301
	Call Number	EMAT @ emat @ c:irua:142642			Serial	4562
Permanent link to this record



	Author	Wang, B.; Idrissi, H.; Galceran, M.; Colla, M.S.; Turner, S.; Hui, S.; Raskin, J.P.; Pardoen, T.; Godet, S.; Schryvers, D.
	Title	Advanced TEM investigation of the plasticity mechanisms in nanocrystalline freestanding palladium films with nanoscale twins			Type	A1 Journal article
	Year	2012	Publication	International journal of plasticity	Abbreviated Journal	Int J Plasticity
	Volume	37	Issue		Pages	140-156
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Nanocrystalline palladium thin films deposited by electron-beam evaporation and deformed by on-chip tensile testing reveal a surprisingly large strain hardening capacity when considering the small similar to 25 nm grain size. The as-grown films contain several coherent single and multifold twin boundaries. The coherency of the twin boundaries considerably decreases with deformation due to dislocation/twin boundary interactions. These reactions are described based on a detailed analysis of the number and the type of dislocations located at the twin boundaries using high-resolution TEM, including aberration corrected microscopy. Sessile Frank dislocations were observed at the twin/matrix interfaces, explaining the loss of the TB coherency due to the Burgers vector pointing out of the twinning plane. Grain boundary mediated processes were excluded as a mechanism dominating the plastic deformation based on the investigation of the grain size distribution as well as the crystallographic texture using Automated Crystallographic Orientation Indexation TEM. Other factors influencing the plastic deformation such as impurities and the presence of a native passivation oxide layer at the surface of the films were investigated using analytical TEM. The twin boundaries observed in the present work partly explain the high strain hardening capacity by providing both increasing resistance to dislocation motion with deformation and a source for dislocation multiplication. (C) 2012 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000307416100009	Publication Date	2012-05-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0749-6419;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.702	Times cited	44	Open Access
	Notes	Iap; Fwo			Approved	Most recent IF: 5.702; 2012 IF: 4.356
	Call Number	UA @ lucian @ c:irua:101082			Serial	74
Permanent link to this record



	Author	Potapov, P.L.; Kulkova, S.E.; Schryvers, D.; Verbeeck, J.
	Title	Structural and chemical effects on EELS L_3,2 ionization edges in Ni-based intermetallic compounds			Type	A1 Journal article
	Year	2001	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	64	Issue		Pages	184110,1-9
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000172239400038	Publication Date	2002-07-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	44	Open Access
	Notes				Approved	Most recent IF: 3.836; 2001 IF: NA
	Call Number	UA @ lucian @ c:irua:48393			Serial	3192
Permanent link to this record



	Author	Seo, J.W.; Schryvers, D.
	Title	TEM investigation of the microstructure and defects of CuZr martensite: 1: morphology and twin systems			Type	A1 Journal article
	Year	1998	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	46	Issue		Pages	1165-1175
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000072289100009	Publication Date	2002-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	46	Open Access
	Notes				Approved	Most recent IF: 5.301; 1998 IF: 1.834
	Call Number	UA @ lucian @ c:irua:48360			Serial	3479
Permanent link to this record



	Author	Yang, Z.; Tirry, W.; Schryvers, D.
	Title	Analytical TEM investigations on concentration gradients surrounding Ni₄Ti₃ precipitates in Ni-Ti shape memory material			Type	A1 Journal article
	Year	2005	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	52	Issue	11	Pages	1129-1134
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000228190200010	Publication Date	2005-03-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	49	Open Access
	Notes	GOA project; MCRTN-FP6-505226 Multimat			Approved	Most recent IF: 3.747; 2005 IF: 2.228
	Call Number	UA @ lucian @ c:irua:55687			Serial	110
Permanent link to this record



	Author	Wang, X.; Kustov, S.; Li, K.; Schryvers, D.; Verlinden, B.; Van Humbeeck, J.
	Title	Effect of nanoprecipitates on the transformation behavior and functional properties of a Ti50.8 at.% Ni alloy with micron-sized grains			Type	A1 Journal article
	Year	2015	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	82	Issue	82	Pages	224-233
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	In order to take advantage of both grain refinement and precipitation hardening effects, nanoscaled Ni4Ti3 precipitates are introduced in a Ti50.8 at.% Ni alloy with micron-sized grains (average grain size of 1.7 μm). Calorimetry, electrical resistance studies and thermomechanical tests were employed to study the transformation behavior and functional properties in relation to the obtained microstructure. A significant suppression of martensite transformation by the obtained microstructure is observed. The thermomechanical tests show that the advantageous properties of both grain refinement and precipitation hardening are combined in the developed materials, resulting in superior shape memory characteristics and stability of pseudoelasticity. It is concluded that introducing nanoscaled Ni4Ti3 precipitates into small grains is a new approach to improve the functional properties of NiTi shape memory alloys.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000347017800021	Publication Date	2014-10-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	51	Open Access
	Notes	Fwo			Approved	Most recent IF: 5.301; 2015 IF: 4.465
	Call Number	c:irua:120469			Serial	824
Permanent link to this record



	Author	Tirry, W.; Schryvers, D.
	Title	Linking a completely three-dimensional nanostrain to a structural transformation eigenstrain			Type	A1 Journal article
	Year	2009	Publication	Nature materials	Abbreviated Journal	Nat Mater
	Volume	8	Issue	9	Pages	752-757
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	NiTi is one of the most popular shape-memory alloys, a phenomenon resulting from a martensitic transformation. Commercial NiTi-based alloys are often thermally treated to contain Ni4Ti3 precipitates. The presence of these precipitates can introduce an extra transformation step related to the so-called R-phase. It is believed that the strain field surrounding the precipitates, caused by the matrixprecipitate lattice mismatch, lies at the origin of this intermediate transformation step. Atomic-resolution transmission electron microscopy in combination with geometrical phase analysis is used to measure the elastic strain field surrounding these precipitates. By combining measurements from two different crystallographic directions, the three-dimensional strain matrix is determined from two-dimensional measurements. Comparison of the measured strain matrix to the eigenstrain of the R-phase shows that both are very similar and that the introduction of the R-phase might indeed compensate the elastic strain introduced by the precipitate.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000269215500022	Publication Date	2009-06-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1476-1122;1476-4660;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	39.737	Times cited	53	Open Access
	Notes	Multimat			Approved	Most recent IF: 39.737; 2009 IF: 29.504
	Call Number	UA @ lucian @ c:irua:77657			Serial	1822
Permanent link to this record



	Author	Peirs, J.; Tirry, W.; Amin-Ahmadi, B.; Coghe, F.; Verleysen, P.; Rabet, L.; Schryvers, D.; Degrieck, J.
	Title	Microstructure of adiabatic shear bands in Ti6Al4V			Type	A1 Journal article
	Year	2013	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	75	Issue		Pages	79-92
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Microstructural deformation mechanisms in adiabatic shear bands in Ti6Al4V are studied using traditional TEM and selected area diffraction, and more advanced microstructural characterisation techniques such as energy dispersive X-ray spectroscopy, high angle annular dark field STEM and conical dark field TEM. The shear bands under investigation are induced in Ti6Al4V samples by high strain rate compression of cylindrical and hat-shaped specimens in a split Hopkinson pressure bar setup. Samples from experiments interrupted at different levels of deformation are used to study the evolution of the microstructure in and nearby the shear bands. From the early stages of adiabatic shear band formation, TEM revealed strongly elongated equiaxed grains in the shear band. These band-like grains become narrower towards the centre of the band and start to fraction even further along their elongated direction to finally result in a nano-crystalline region in the core. In fully developed shear bands, twins and a needle-like martensite morphology are observed near the shear band.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000314860900011	Publication Date	2012-11-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	56	Open Access
	Notes	Iuap; Fwo			Approved	Most recent IF: 2.714; 2013 IF: 1.925
	Call Number	UA @ lucian @ c:irua:105300			Serial	2065
Permanent link to this record



	Author	Delville, R.; Schryvers, D.; Zhang, Z.; James, R.D.
	Title	Transmission electron microscopy investigation of microstructures in low-hysteresis alloys with special lattice parameters			Type	A1 Journal article
	Year	2009	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	60	Issue	5	Pages	293-296
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	A sharp drop in hysteresis is observed for shape memory alloys satisfying the compatibility condition between austenite and martensite, i.e. ë2 = 1, where ë2 is the middle eigenvalue of the transformation strain matrix. The present work investigates the evolution of microstructure by transmission electron microscopy as the composition of the Ti50Ni50−xPdx system is systemically tuned to achieve the condition ë2 = 1. Changes in morphology, twinning density and twinning modes are reported along with twinless martensite and exact austenitemartensite interfaces.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000262553300007	Publication Date	2008-11-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	56	Open Access
	Notes	Multimat			Approved	Most recent IF: 3.747; 2009 IF: 2.949
	Call Number	UA @ lucian @ c:irua:76017			Serial	3710
Permanent link to this record



	Author	Idrissi, H.; Wang, B.; Colla, M.S.; Raskin, J.P.; Schryvers, D.; Pardoen, T.
	Title	Ultrahigh strain hardening in thin palladium films with nanoscale twins			Type	A1 Journal article
	Year	2011	Publication	Advanced materials	Abbreviated Journal	Adv Mater
	Volume	23	Issue	18	Pages	2119-2122
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Nanocrystalline Pd thin films containing coherent growth twin boundaries are deformed using on-chip nanomechanical testing. A large work-hardening capacity is measured. The origin of the observed behavior is unraveled using transmission electron microscopy and shows specific dislocations and twin boundaries interactions. The results indicate the potential for large strength and ductility balance enhancement in Pd films, as needed in membranes for H technologies.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000291164200013	Publication Date	2011-04-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0935-9648;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	19.791	Times cited	57	Open Access
	Notes	Iap			Approved	Most recent IF: 19.791; 2011 IF: 13.877
	Call Number	UA @ lucian @ c:irua:90103			Serial	3794
Permanent link to this record



	Author	Hamon, A.-L.; Verbeeck, J.; Schryvers, D.; Benedikt, J.; van den Sanden, R.M.C.M.
	Title	ELNES study of carbon K-edge spectra of plasma deposited carbon films			Type	A1 Journal article
	Year	2004	Publication	Journal of materials chemistry	Abbreviated Journal	J Mater Chem
	Volume	14	Issue		Pages	2030-2035
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Electron energy loss spectroscopy was used to investigate the bonding of plasma deposited carbon films. The experimental conditions include the use of a specific collection angle for which the shape of the spectra is free of the orientation dependency usually encountered in graphite due to its anisotropic structure. The first quantification process of the energy loss near-edge structure was performed by a standard fit of the collected spectrum, corrected for background and multiple scattering, with three Gaussian functions followed by a comparison with the graphite spectrum obtained under equivalent experimental conditions. In a second approach a fitting model directly incorporating the background subtraction and multiple scattering removal was applied. The final numerical results are interpreted in view of the deposition conditions of the films and the actual fitting procedure with the related choice of parameters.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000222312500017	Publication Date	2004-06-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0959-9428;1364-5501;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.626	Times cited	61	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:48782UA @ admin @ c:irua:48782			Serial	1025
Permanent link to this record



	Author	Zhou, C.; Ji, G.; Chen, Z.; Wang, M.; Addad, A.; Schryvers, D.; Wang, H.
	Title	Fabrication, interface characterization and modeling of oriented graphite flakes/Si/Al composites for thermal management applications			Type	A1 Journal article
	Year	2014	Publication	Materials and design	Abbreviated Journal	Mater Design
	Volume	63	Issue		Pages	719-728
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Highly thermally conductive graphite flakes (Gf)/Si/Al composites have been fabricated using Gf, Si powder and an AlSi7Mg0.3 alloy by an optimized pressure infiltration process for thermal management applications. In the composites, the layers of Gf were spaced apart by Si particles and oriented perpendicular to the pressing direction, which offered the opportunity to tailor the thermal conductivity (TC) and coefficient of thermal expansion (CTE) of the composites. Microstructural characterization revealed that the formation of a clean and tightly-adhered interface at the nanoscale between the side surface of the Gf and Al matrix, devoid of a detrimental Al4C3 phase and a reacted amorphous AlSiOC layer, contributed to excellent thermal performance along the alignment direction. With increasing volume fraction of Gf from 13.7 to 71.1 vol.%, the longitudinal (i.e. parallel to the graphite layers) TC of the composites increased from 179 to 526 W/m K, while the longitudinal CTE decreased from 12.1 to 7.3 ppm/K (matching the values of electronic components). Furthermore, the modified layers-in-parallel model better fitted the longitudinal TC data than the layers-in-parallel model and confirmed that the clean and tightly-adhered interface is favorable for the enhanced longitudinal TC.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Reigate	Editor
	Language		Wos	000340949300086	Publication Date	2014-07-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0261-3069;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	61	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:118124			Serial	1166
Permanent link to this record



	Author	Delville, R.; Kasinathan, S.; Zhang, Z.; van Humbeeck, J.; James, R.D.; Schryvers, D.
	Title	Transmission electron microscopy study of phase compatibility in low hysteresis shape memory alloys			Type	A1 Journal article
	Year	2010	Publication	Philosophical magazine	Abbreviated Journal	Philos Mag
	Volume	90	Issue	1/4	Pages	177-195
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Recent findings have linked low hysteresis in shape memory alloys with phase compatibility between austenite and martensite. To investigate the evolution of microstructure as phase compatibility increases and hysteresis is reduced, transmission electron microscopy was used to study the alloy system Ti50Ni50xPdx, where the composition is systemically tuned to approach perfect compatibility. Changes in morphology, twinning density and twinning modes are reported, along with special microstructures occurring when compatibility is achieved. In addition, the interface between austenite and a single variant of martensite was studied by high-resolution and conventional electron microscopy. The low energy configuration of the interface detailed in this article suggests that it plays an important role in the lowering of hysteresis compared to classical habit plane interfaces.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000274576500013	Publication Date	2010-01-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-6435;1478-6443;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.505	Times cited	70	Open Access
	Notes	Multimat; FWO			Approved	Most recent IF: 1.505; 2010 IF: 1.304
	Call Number	UA @ lucian @ c:irua:79859			Serial	3718
Permanent link to this record



	Author	Schryvers, D.; Firstov, G.S.; Seo, J.W.; van Humbeeck, J.; Koval, Y.N.
	Title	Unit cell determination in CuZr martensite by EM and X-ray diffraction			Type	A1 Journal article
	Year	1997	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	36	Issue		Pages	1119-1125
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	A1997WV99600007	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	76	Open Access
	Notes				Approved	Most recent IF: 3.747; 1997 IF: 0.645
	Call Number	UA @ lucian @ c:irua:21344			Serial	3811
Permanent link to this record



	Author	Bals, S.; Tirry, W.; Geurts, R.; Yang, Z.; Schryvers, D.
	Title	High-quality sample preparation by low kV FIB thinning for analytical TEM measurements			Type	A1 Journal article
	Year	2007	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	13	Issue	2	Pages	80-86
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Focused ion beam specimen preparation has been used for NiTi samples and SrTiO(3)/SrRuO(3) multilayers with prevention of surface amorphization and Ga implantation by a 2-kV cleaning procedure. Transmission electron microscopy techniques show that the samples are of high quality with a controlled thickness over large scales. Furthermore, preferential thinning effects in multicompounds are avoided, which is important when analytical transmission electron microscopy measurements need to be interpreted in a quantitative manner. The results are compared to similar measurements acquired for samples obtained using conventional preparation techniques such as electropolishing for alloys and ion milling for oxides.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000245662200002	Publication Date	2007-03-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	82	Open Access
	Notes	Fwo; Goa			Approved	Most recent IF: 1.891; 2007 IF: 1.941
	Call Number	UA @ lucian @ c:irua:65850			Serial	1441
Permanent link to this record



	Author	Idrissi, H.; Ryelandt, L.; Veron, M.; Schryvers, D.; Jacques, P.J.
	Title	Is there a relationship between the stacking fault character and the activated mode of plasticity of FeMn-based austenitic steels?			Type	A1 Journal article
	Year	2009	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	60	Issue	11	Pages	941-944
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	By changing the testing temperature, an austenitic FeMnAlSi alloy presents either å-martensite transformation or mechanical twinning during straining. In order to understand the nucleation and growth mechanisms involved in both phenomena, defects and particularly stacking faults, were characterized by transmission electron microscopy. It is observed that the character of the stacking faults also changes (from extrinsic to intrinsic) together with the temperature and the activated mode of plasticity.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000265359900005	Publication Date	2009-02-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	84	Open Access
	Notes	Iap			Approved	Most recent IF: 3.747; 2009 IF: 2.949
	Call Number	UA @ lucian @ c:irua:77276			Serial	1751
Permanent link to this record



	Author	Tirry, W.; Schryvers, D.
	Title	Quantitative determination of strain fields around Ni₄Ti₃ precipitates in NiTi			Type	A1 Journal article
	Year	2005	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	53	Issue	4	Pages	1041-1049
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000226774500014	Publication Date	2004-12-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	97	Open Access
	Notes				Approved	Most recent IF: 5.301; 2005 IF: 3.430
	Call Number	UA @ lucian @ c:irua:55686			Serial	2750
Permanent link to this record



	Author	Shabalovskaya, S.A.; Tian, H.; Anderegg, J.W.; Schryvers, D.U.; Carroll, W.U.; van Humbeeck, J.
	Title	The influence of surface oxides on the distribution and release of nickel from Nitinol wires			Type	A1 Journal article
	Year	2009	Publication	Biomaterials	Abbreviated Journal	Biomaterials
	Volume	30	Issue	4	Pages	468-477
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The patterns of Ni release from Nitinol vary depending on the type of material (NiTi alloys with low or no processing versus commercial wires or sheets). A thick TiO2 layer generated on the wire surface during processing is often considered as a reliable barrier against Ni release. The present study of Nitinol wires with surface oxides resulting from production was conducted to identify the sources of Ni release and its distribution in the surface sublayers. The chemistry and topography of the surfaces of Nitinol wires drawn using different techniques were studied with XPS and SEM. The distribution of Ni into surface depth and the surface oxide thickness were evaluated using Auger spectroscopy, TEM with FIB and ELNES. Ni release was estimated using either ICPA or AAS. Potentiodynamic potential polarization of selected wires was performed in as-received state with no strain and in treated strained samples. Wire samples in the as-received state showed low breakdown potentials (200 mV); the improved corrosion resistance of these wires after treatment was not affected by strain. It is shown how processing techniques affect surface topography, chemistry and also Ni release. Nitinol wires with the thickest surface oxide TiO2 (up to 720 nm) showed the highest Ni release, attributed to the presence of particles of essentially pure Ni whose number and size increased while approaching the interface between the surface and the bulk. The biological implications of high and lasting Ni release are also discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Guildford	Editor
	Language		Wos	000262065500006	Publication Date	2008-11-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0142-9612;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.402	Times cited	102	Open Access
	Notes	Fwo; G.0465.05			Approved	Most recent IF: 8.402; 2009 IF: 7.365
	Call Number	UA @ lucian @ c:irua:72320			Serial	1641
Permanent link to this record



	Author	Delville, R.; Malard, B.; Pilch, J.; Schryvers, D.
	Title	Microstructure changes during non-conventional heat treatment of thin NiTi wires by pulsed electric current studied by transmission electron microscopy			Type	A1 Journal article
	Year	2010	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	58	Issue	13	Pages	4503-4515
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Transmission electron microscopy, electrical resistivity measurements and mechanical testing were employed to investigate the evolution of microstructure and functional superelastic properties of 0.1 mm diameter as-drawn NiTi wires subjected to a non-conventional heat treatment by controlled electric pulse currents. This method enables a better control of the recovery and recrystallization processes taking place during the heat treatment and accordingly a better control on the final microstructure. Using a stepwise approach of millisecond pulse annealing, it is shown how the microstructure evolves from a severely deformed state with no functional properties to an optimal nanograined microstructure (2050 nm) that is partially recovered through polygonization and partially recrystallized and that has the best functional properties. Such a microstructure is highly resistant against dislocation slip upon cycling, while microstructures annealed for longer times and showing mostly recrystallized grains were prone to dislocation slip, particularly as the grain size exceeds 200 nm.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000279787100020	Publication Date	2010-06-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	110	Open Access
	Notes	Multimat; FWO IAA			Approved	Most recent IF: 5.301; 2010 IF: 3.791
	Call Number	UA @ lucian @ c:irua:83279			Serial	2062
Permanent link to this record