Home << 1 2 3 4 5 6 7 8 9 10 11 12 >>
List View
 | 
Citations
 | 
Details
   web
Records
Author Montoya, E.; Bals, S.; Rossell, M.D.; Schryvers, D.; Van Tendeloo, G.
Title Evaluation of top, angle, and side cleaned FIB samples for TEM analysis Type A1 Journal article
Year 2007 Publication Microscopy research and technique Abbreviated Journal Microsc Res Techniq
Volume 70 Issue 12 Pages 1060-1071
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract ITEM specimens of a LaAlO3/SrTiO3 multilayer are prepared by FIB with internal lift out. Using a Ga+1 beam of 5 kV, a final cleaning step yielding top, top-angle, side, and bottom-angle cleaning is performed. Different cleaning procedures, which can be easily implemented in a dual beam FIB system, are described and compared; all cleaning types produce thin lamellae, useful for HRTEM and HAADF-STEM work up to atomic resolution. However, the top cleaned lamellae are strongly affected by the curtain effect. Top-angle cleaned specimens show an amorphous layer of around 5 nm at the specimen surfaces, due to damage and redeposition. Furthermore, it is observed that the LaAlO3 layers are preferentially destroyed and transformed into amorphous material, during the thinning process.
Address
Corporate Author Thesis
Publisher Place of Publication New York, N.Y. Editor
Language Wos 000251868200008 Publication Date 2007-08-25
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1059-910X;1097-0029; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.147 Times cited (up) 36 Open Access
Notes Aip; Fwo Approved Most recent IF: 1.147; 2007 IF: 1.644
Call Number UA @ lucian @ c:irua:67282 Serial 1090
Permanent link to this record
 
 
Author Potapov, P.; Shelyakov, A.; Schryvers, D.
Title On the crystal structure of TiNi-Cu martensite Type A1 Journal article
Year 2001 Publication Scripta materialia Abbreviated Journal Scripta Mater
Volume 44 Issue Pages 1-7
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000166808100001 Publication Date 2002-07-25
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited (up) 36 Open Access
Notes Approved Most recent IF: 3.747; 2001 IF: 1.130
Call Number UA @ lucian @ c:irua:48378 Serial 2433
Permanent link to this record
 
 
Author Srivastava, A.K.; Schryvers, D.; van Humbeeck, J.
Title Grain growth and precipitation in an annealed cold-rolled Ni50.2Ti49.8 alloy Type A1 Journal article
Year 2007 Publication Intermetallics Abbreviated Journal Intermetallics
Volume 15 Issue 12 Pages 1538-1547
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Chicago, Ill. Editor
Language Wos 000250930300006 Publication Date 2007-08-17
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0966-9795; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.14 Times cited (up) 37 Open Access
Notes FWO project G.0465.05; EU RTN Approved Most recent IF: 3.14; 2007 IF: 2.219
Call Number UA @ lucian @ c:irua:65851 Serial 1363
Permanent link to this record
 
 
Author Schryvers, D.
Title Microtwin sequences in thermoelastic NixAl100-x martensite studied by conventional and high resolution transmission electron microscopy Type A1 Journal article
Year 1993 Publication Philosophical magazine: A: physics of condensed matter: defects and mechanical properties Abbreviated Journal
Volume 68 Issue Pages 1017-1032
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication London Editor
Language Wos A1993MF59100016 Publication Date 2007-07-08
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0141-8610;1460-6992; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited (up) 37 Open Access
Notes Approved no
Call Number UA @ lucian @ c:irua:6779 Serial 2079
Permanent link to this record
 
 
Author Colla, M.-S.; Wang, B.; Idrissi, H.; Schryvers, D.; Raskin, J.-P.; Pardoen, T.
Title High strength-ductility of thin nanocrystalline palladium films with nanoscale twins : on-chip testing and grain aggregate model Type A1 Journal article
Year 2012 Publication Acta materialia Abbreviated Journal Acta Mater
Volume 60 Issue 4 Pages 1795-1806
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract The mechanical behaviour of thin nanocrystalline palladium films with an ∼30 nm in plane grain size has been characterized on chip under uniaxial tension. The films exhibit a large strain hardening capacity and a significant increase in the strength with decreasing thickness. Transmission electron microscopy has revealed the presence of a moderate density of growth nanotwins interacting with dislocations. A semi-analytical grain aggregate model is proposed to investigate the impact of different contributions to the flow behaviour, involving the effect of twins, of grain size and of the presence of a thin surface layer. This model provides guidelines to optimizing the strength/ductility ratio of the films.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000301989500035 Publication Date 2012-02-02
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6454; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 5.301 Times cited (up) 38 Open Access
Notes Iap Approved Most recent IF: 5.301; 2012 IF: 3.941
Call Number UA @ lucian @ c:irua:94213 Serial 1465
Permanent link to this record
 
 
Author Salje, E.K.H.; Zhang, H.; Idrissi, H.; Schryvers, D.; Carpenter, M.A.; Moya, X.; Planes, A.
Title Mechanical resonance of the austenite/martensite interface and the pinning of the martensitic microstructures by dislocations in Cu74.08Al23.13Be2.79 Type A1 Journal article
Year 2009 Publication Physical review: B: condensed matter and materials physics Abbreviated Journal Phys Rev B
Volume 80 Issue 13 Pages 134114,1-1134114,8
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract A single crystal of Cu74.08Al23.13Be2.79 undergoes a martensitic phase transition at 246 and 232 K under heating and cooling, respectively. The phase fronts between the austenite and martensite regions of the sample are weakly mobile with a power-law resonance under external stress fields. Surprisingly, the martensite phase is elastically much harder than the austenite phase showing that interfaces between various crystallographic variants are strongly pinned and cannot be moved by external stress while the phase boundary between the austenite and martensite regions in the sample remains mobile. This unusual behavior was studied by dynamical mechanical analysis (DMA) and resonant ultrasound spectroscopy. The remnant strain, storage modulus, and internal friction were recorded simultaneously for different applied forces in DMA. With increasing forces, the remnant strain increases monotonously while the internal friction peak height shows a minimum at 300 mN. Transmission electron microscopy shows that the pinning is generated by dislocations which are inherited from the austenite phase.
Address
Corporate Author Thesis
Publisher Place of Publication Lancaster, Pa Editor
Language Wos 000271351300033 Publication Date 2009-10-22
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1098-0121;1550-235X; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.836 Times cited (up) 38 Open Access
Notes Multimat Approved Most recent IF: 3.836; 2009 IF: 3.475
Call Number UA @ lucian @ c:irua:78542 Serial 1975
Permanent link to this record
 
 
Author Tian, H.; Schryvers, D.; Liu, D.; Jiang, Q.; van Humbeeck, J.
Title Stability of Ni in nitinol oxide surfaces Type A1 Journal article
Year 2011 Publication Acta biomaterialia Abbreviated Journal Acta Biomater
Volume 7 Issue 2 Pages 892-899
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract The stability of Ni in titanium oxide surface layers on nitinol wires known to release certain amounts of Ni was investigated by first principles density functional theory and transmission electron microscopy. The oxides were identified as a combination of TiO and TiO2 depending on the thickness of the layer. The calculations indicate that free Ni atoms can exist in TiO at ambient temperature while Ni particles form in TiO2, which was confirmed by the transmission electron microscopy observations. The results are discussed with respect to surface stability and Ni release due to free Ni atoms and Ni particles.
Address
Corporate Author Thesis
Publisher Place of Publication S.l. Editor
Language Wos 000286707700047 Publication Date 2010-09-17
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1742-7061; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 6.319 Times cited (up) 39 Open Access
Notes Fwo Approved Most recent IF: 6.319; 2011 IF: 4.865
Call Number UA @ lucian @ c:irua:85998 Serial 3128
Permanent link to this record
 
 
Author Goessens, C.; Schryvers, D.; van Landuyt, J.; Amelinckx, S.; Verbeeck, A.; de Keyzer, R.
Title Characterization of crystal defects in mixed tabular silver halide grains by conventional transmission electron microscopy and X-ray diffractometry Type A1 Journal article
Year 1991 Publication Journal of crystal growth Abbreviated Journal J Cryst Growth
Volume 110 Issue Pages 930-941
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Amsterdam Editor
Language Wos A1991FL02100033 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0022-0248 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.698 Times cited (up) 40 Open Access
Notes Approved
Call Number UA @ lucian @ c:irua:48349 Serial 321
Permanent link to this record
 
 
Author Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J.
Title On the stress state dependence of the twinning rate and work hardening in twinning-induced plasticity steels Type A1 Journal article
Year 2012 Publication Scripta materialia Abbreviated Journal Scripta Mater
Volume 66 Issue 12 Pages 966-971
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract The influence of the stress state on the twinning rate and work hardening is studied in the case of an FeMnC TWIP steel strained in uniaxial tension, simple shear and rolling. The resulting stressstrain responses exhibit marked differences. The twinning rate, number of activated twinning systems in each grain, twin thickness and transmission of twins across grain boundaries are dependent on the imposed stress state during straining. Relationships between twin features and macroscopic work hardening rate are established.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000304641500004 Publication Date 2012-02-10
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited (up) 41 Open Access
Notes Iap Approved Most recent IF: 3.747; 2012 IF: 2.821
Call Number UA @ lucian @ c:irua:98374 Serial 2454
Permanent link to this record
 
 
Author Tang, Y.; Chen, Z.; Borbely, A.; Ji, G.; Zhong, S.Y.; Schryvers, D.; Ji, V.; Wang, H.W.
Title Quantitative study of particle size distribution in an in-situ grown Al-TiB2 composite by synchrotron X-ray diffraction and electron microscopy Type A1 Journal article
Year 2015 Publication Materials characterization Abbreviated Journal Mater Charact
Volume 102 Issue 102 Pages 131-136
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Synchrotron X-ray diffraction and transmission electron microscopy (TEM) were applied to quantitatively characterize the average particle size and size distribution of free-standing TiB2 particles and TiB2 particles in an insitu grown Al–TiB2 composite. The detailed evaluations were carried out by X-ray line profile analysis using the restrictedmoment method and multiplewhole profile fitting procedure (MWP). Both numericalmethods indicate that the formed TiB2 particles are well crystallized and free of crystal defects. The average particle size determined from different Bragg reflections by the restricted moment method ranges between 25 and 55 nm, where the smallest particle size is determined using the 110 reflection suggesting the highest lateral-growth velocity of (110) facets. TheMWP method has shown that the in-situ grown TiB2 particles have a very low dislocation density (~1011 m−2) and their size distribution can be described by a log-normal distribution. Good agreement was found between the results obtained from the restricted moment and MWP methods, which was further confirmed by TEM.
Address
Corporate Author Thesis
Publisher Place of Publication New York Editor
Language Wos 000355335200017 Publication Date 2015-03-04
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1044-5803; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.714 Times cited (up) 41 Open Access
Notes This work is financially supported by the National Natural Science Foundation of China (Grant No. 51201099 and No. 51301108) and the China Postdoctoral Science Foundation (Grant No. 2013T60443 and No. 2012M520891). The authors are grateful for the project 2013BB03 supported by NPL, CAEP. Many thanks are also due to the faculty of BL14B beamline at the Shanghai Synchrotron Radiation Facility for their help on synchrotron experiments. Approved Most recent IF: 2.714; 2015 IF: 1.845
Call Number c:irua:126443 Serial 2764
Permanent link to this record
 
 
Author Jembrih-Simbürger, D.; Neelmeijer, C.; Schalm, O.; Fredrickx, P.; Schreiner, M.; De Vis, K.; Mäder, M.; Schryvers, D.; Caen, J.
Title The colour of silver stained glass : analytical investigations carried out with XRF, SEM/EDX, TEM and IBA Type A1 Journal article
Year 2002 Publication Journal of analytical atomic spectrometry Abbreviated Journal J Anal Atom Spectrom
Volume 17 Issue Pages 321-328
Keywords A1 Journal article; Art; Electron microscopy for materials research (EMAT); AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
Abstract Glass treated on its surface with silver compounds and an aluminosilicate, such as ochre or clay, at higher temperatures (between 550 and 650 °C) accepts a wide variety of a yellow colour. It is the aim of this study to investigate the parameters of the manufacturing process affecting the final colour of silver stained glass and to correlate them with the final colour and colour intensity. Therefore, defined mixtures of ochre and a silver compound (AgCl, AgNO3, Ag2SO4, Ag3PO4, Ag2O) were prepared and applied on soda-lime glass. The firing process was modified within the range from 563 to 630 °C and glass samples were analysed after treatment with energy dispersive X-ray fluorescence analysis (EDXRF), scanning electron microscopy (SEM/EDX), transmission electron microscopy (TEM), as well as ion beam analysis (IBA) with an external beam. Within the scope of IBA simultaneous measurements using particle-induced X-ray emission (PIXE), particle-induced gamma-ray emission (PIGE), and Rutherford backscattering spectrometry (RBS) were carried out in order to obtain the thickness of the Ag-rich surface layer and the depth distribution of Ag. By means of TEM the microstructure of the silver particles was visualised. XRF results show that the lowest amount of Ag could be detected on glass samples treated with silver stain mixtures containing AgCl and Ag2O. A low kiln temperature (e.g. 563 °C) results in a higher silver concentration at the surface and lower penetration depths. Furthermore, the results obtained with SEM/EDX at cross-sections of the glass samples could be confirmed by PIXE, PIGE, RBS, and TEM.
Address
Corporate Author Thesis
Publisher Place of Publication London Editor
Language Wos 000175158900001 Publication Date 2002-07-26
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0267-9477;1364-5544; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.379 Times cited (up) 42 Open Access
Notes Approved Most recent IF: 3.379; 2002 IF: 4.250
Call Number UA @ lucian @ c:irua:48775 Serial 395
Permanent link to this record
 
 
Author Ghidelli, M.; Idrissi, H.; Gravier, S.; Blandin, J.-J.; Raskin, J.-P.; Schryvers, D.; Pardoen, T.
Title Homogeneous flow and size dependent mechanical behavior in highly ductile Zr 65 Ni 35 metallic glass films Type A1 Journal article
Year 2017 Publication Acta materialia Abbreviated Journal Acta Mater
Volume 131 Issue 131 Pages 246-259
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Motivated by recent studies demonstrating a high strength – high ductility potential of nano-scale metallic glass samples, the mechanical response of freestanding Zr65Ni35 film with sub-micron thickness has been investigated by combining advanced on-chip tensile testing and electron microscopy. Large deformation up to 15% is found for specimen thicknesses below 500 nm with variations depending on specimen size and frame compliance. The deformation is homogenous until fracture, with no evidence of shear banding. The yield stress is doubled when decreasing the specimen cross-section, reaching ~3 GPa for small cross-sections. The fracture strain variation is related to both the stability of the test device and to the specimen size. The study concludes on clear disconnect between the mechanisms controlling the onset of plasticity and the fracture process.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000402343400023 Publication Date 2017-03-31
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6454 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 5.301 Times cited (up) 42 Open Access OpenAccess
Notes This work has been funded by the Belgian Science Policy through the IAP 7/21 project. We acknowledge IDS-FunMat for the PhD financial support.We thank the Renatech network and the PTA (Plateforme Technologique Amont) in Grenoble (France) for TFMG deposition facilities. The WINFAB infrastructure at the UCL and the help of R. Vayrette and M. Coulombier for the on-chip tests. H. Idrissi is currently mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). Approved Most recent IF: 5.301
Call Number EMAT @ emat @ c:irua:142642 Serial 4562
Permanent link to this record
 
 
Author Wang, B.; Idrissi, H.; Galceran, M.; Colla, M.S.; Turner, S.; Hui, S.; Raskin, J.P.; Pardoen, T.; Godet, S.; Schryvers, D.
Title Advanced TEM investigation of the plasticity mechanisms in nanocrystalline freestanding palladium films with nanoscale twins Type A1 Journal article
Year 2012 Publication International journal of plasticity Abbreviated Journal Int J Plasticity
Volume 37 Issue Pages 140-156
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Nanocrystalline palladium thin films deposited by electron-beam evaporation and deformed by on-chip tensile testing reveal a surprisingly large strain hardening capacity when considering the small similar to 25 nm grain size. The as-grown films contain several coherent single and multifold twin boundaries. The coherency of the twin boundaries considerably decreases with deformation due to dislocation/twin boundary interactions. These reactions are described based on a detailed analysis of the number and the type of dislocations located at the twin boundaries using high-resolution TEM, including aberration corrected microscopy. Sessile Frank dislocations were observed at the twin/matrix interfaces, explaining the loss of the TB coherency due to the Burgers vector pointing out of the twinning plane. Grain boundary mediated processes were excluded as a mechanism dominating the plastic deformation based on the investigation of the grain size distribution as well as the crystallographic texture using Automated Crystallographic Orientation Indexation TEM. Other factors influencing the plastic deformation such as impurities and the presence of a native passivation oxide layer at the surface of the films were investigated using analytical TEM. The twin boundaries observed in the present work partly explain the high strain hardening capacity by providing both increasing resistance to dislocation motion with deformation and a source for dislocation multiplication. (C) 2012 Elsevier Ltd. All rights reserved.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000307416100009 Publication Date 2012-05-16
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0749-6419; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 5.702 Times cited (up) 44 Open Access
Notes Iap; Fwo Approved Most recent IF: 5.702; 2012 IF: 4.356
Call Number UA @ lucian @ c:irua:101082 Serial 74
Permanent link to this record
 
 
Author Potapov, P.L.; Kulkova, S.E.; Schryvers, D.; Verbeeck, J.
Title Structural and chemical effects on EELS L3,2 ionization edges in Ni-based intermetallic compounds Type A1 Journal article
Year 2001 Publication Physical review : B : condensed matter and materials physics Abbreviated Journal Phys Rev B
Volume 64 Issue Pages 184110,1-9
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Lancaster, Pa Editor
Language Wos 000172239400038 Publication Date 2002-07-27
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1098-0121;1550-235X; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.836 Times cited (up) 44 Open Access
Notes Approved Most recent IF: 3.836; 2001 IF: NA
Call Number UA @ lucian @ c:irua:48393 Serial 3192
Permanent link to this record
 
 
Author Seo, J.W.; Schryvers, D.
Title TEM investigation of the microstructure and defects of CuZr martensite: 1: morphology and twin systems Type A1 Journal article
Year 1998 Publication Acta materialia Abbreviated Journal Acta Mater
Volume 46 Issue Pages 1165-1175
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000072289100009 Publication Date 2002-07-25
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6454; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 5.301 Times cited (up) 46 Open Access
Notes Approved Most recent IF: 5.301; 1998 IF: 1.834
Call Number UA @ lucian @ c:irua:48360 Serial 3479
Permanent link to this record
 
 
Author Yang, Z.; Tirry, W.; Schryvers, D.
Title Analytical TEM investigations on concentration gradients surrounding Ni4Ti3 precipitates in Ni-Ti shape memory material Type A1 Journal article
Year 2005 Publication Scripta materialia Abbreviated Journal Scripta Mater
Volume 52 Issue 11 Pages 1129-1134
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000228190200010 Publication Date 2005-03-16
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited (up) 49 Open Access
Notes GOA project; MCRTN-FP6-505226 Multimat Approved Most recent IF: 3.747; 2005 IF: 2.228
Call Number UA @ lucian @ c:irua:55687 Serial 110
Permanent link to this record
 
 
Author Wang, X.; Kustov, S.; Li, K.; Schryvers, D.; Verlinden, B.; Van Humbeeck, J.
Title Effect of nanoprecipitates on the transformation behavior and functional properties of a Ti50.8 at.% Ni alloy with micron-sized grains Type A1 Journal article
Year 2015 Publication Acta materialia Abbreviated Journal Acta Mater
Volume 82 Issue 82 Pages 224-233
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract In order to take advantage of both grain refinement and precipitation hardening effects, nanoscaled Ni4Ti3 precipitates are introduced in a Ti50.8 at.% Ni alloy with micron-sized grains (average grain size of 1.7 μm). Calorimetry, electrical resistance studies and thermomechanical tests were employed to study the transformation behavior and functional properties in relation to the obtained microstructure. A significant suppression of martensite transformation by the obtained microstructure is observed. The thermomechanical tests show that the advantageous properties of both grain refinement and precipitation hardening are combined in the developed materials, resulting in superior shape memory characteristics and stability of pseudoelasticity. It is concluded that introducing nanoscaled Ni4Ti3 precipitates into small grains is a new approach to improve the functional properties of NiTi shape memory alloys.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000347017800021 Publication Date 2014-10-04
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6454; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 5.301 Times cited (up) 51 Open Access
Notes Fwo Approved Most recent IF: 5.301; 2015 IF: 4.465
Call Number c:irua:120469 Serial 824
Permanent link to this record
 
 
Author Tirry, W.; Schryvers, D.
Title Linking a completely three-dimensional nanostrain to a structural transformation eigenstrain Type A1 Journal article
Year 2009 Publication Nature materials Abbreviated Journal Nat Mater
Volume 8 Issue 9 Pages 752-757
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract NiTi is one of the most popular shape-memory alloys, a phenomenon resulting from a martensitic transformation. Commercial NiTi-based alloys are often thermally treated to contain Ni4Ti3 precipitates. The presence of these precipitates can introduce an extra transformation step related to the so-called R-phase. It is believed that the strain field surrounding the precipitates, caused by the matrixprecipitate lattice mismatch, lies at the origin of this intermediate transformation step. Atomic-resolution transmission electron microscopy in combination with geometrical phase analysis is used to measure the elastic strain field surrounding these precipitates. By combining measurements from two different crystallographic directions, the three-dimensional strain matrix is determined from two-dimensional measurements. Comparison of the measured strain matrix to the eigenstrain of the R-phase shows that both are very similar and that the introduction of the R-phase might indeed compensate the elastic strain introduced by the precipitate.
Address
Corporate Author Thesis
Publisher Place of Publication London Editor
Language Wos 000269215500022 Publication Date 2009-06-21
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1476-1122;1476-4660; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 39.737 Times cited (up) 53 Open Access
Notes Multimat Approved Most recent IF: 39.737; 2009 IF: 29.504
Call Number UA @ lucian @ c:irua:77657 Serial 1822
Permanent link to this record
 
 
Author Peirs, J.; Tirry, W.; Amin-Ahmadi, B.; Coghe, F.; Verleysen, P.; Rabet, L.; Schryvers, D.; Degrieck, J.
Title Microstructure of adiabatic shear bands in Ti6Al4V Type A1 Journal article
Year 2013 Publication Materials characterization Abbreviated Journal Mater Charact
Volume 75 Issue Pages 79-92
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Microstructural deformation mechanisms in adiabatic shear bands in Ti6Al4V are studied using traditional TEM and selected area diffraction, and more advanced microstructural characterisation techniques such as energy dispersive X-ray spectroscopy, high angle annular dark field STEM and conical dark field TEM. The shear bands under investigation are induced in Ti6Al4V samples by high strain rate compression of cylindrical and hat-shaped specimens in a split Hopkinson pressure bar setup. Samples from experiments interrupted at different levels of deformation are used to study the evolution of the microstructure in and nearby the shear bands. From the early stages of adiabatic shear band formation, TEM revealed strongly elongated equiaxed grains in the shear band. These band-like grains become narrower towards the centre of the band and start to fraction even further along their elongated direction to finally result in a nano-crystalline region in the core. In fully developed shear bands, twins and a needle-like martensite morphology are observed near the shear band.
Address
Corporate Author Thesis
Publisher Place of Publication New York Editor
Language Wos 000314860900011 Publication Date 2012-11-07
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1044-5803; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.714 Times cited (up) 56 Open Access
Notes Iuap; Fwo Approved Most recent IF: 2.714; 2013 IF: 1.925
Call Number UA @ lucian @ c:irua:105300 Serial 2065
Permanent link to this record
 
 
Author Delville, R.; Schryvers, D.; Zhang, Z.; James, R.D.
Title Transmission electron microscopy investigation of microstructures in low-hysteresis alloys with special lattice parameters Type A1 Journal article
Year 2009 Publication Scripta materialia Abbreviated Journal Scripta Mater
Volume 60 Issue 5 Pages 293-296
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract A sharp drop in hysteresis is observed for shape memory alloys satisfying the compatibility condition between austenite and martensite, i.e. ë2 = 1, where ë2 is the middle eigenvalue of the transformation strain matrix. The present work investigates the evolution of microstructure by transmission electron microscopy as the composition of the Ti50Ni50−xPdx system is systemically tuned to achieve the condition ë2 = 1. Changes in morphology, twinning density and twinning modes are reported along with twinless martensite and exact austenitemartensite interfaces.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000262553300007 Publication Date 2008-11-08
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited (up) 56 Open Access
Notes Multimat Approved Most recent IF: 3.747; 2009 IF: 2.949
Call Number UA @ lucian @ c:irua:76017 Serial 3710
Permanent link to this record
 
 
Author Idrissi, H.; Wang, B.; Colla, M.S.; Raskin, J.P.; Schryvers, D.; Pardoen, T.
Title Ultrahigh strain hardening in thin palladium films with nanoscale twins Type A1 Journal article
Year 2011 Publication Advanced materials Abbreviated Journal Adv Mater
Volume 23 Issue 18 Pages 2119-2122
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Nanocrystalline Pd thin films containing coherent growth twin boundaries are deformed using on-chip nanomechanical testing. A large work-hardening capacity is measured. The origin of the observed behavior is unraveled using transmission electron microscopy and shows specific dislocations and twin boundaries interactions. The results indicate the potential for large strength and ductility balance enhancement in Pd films, as needed in membranes for H technologies.
Address
Corporate Author Thesis
Publisher Place of Publication Weinheim Editor
Language Wos 000291164200013 Publication Date 2011-04-04
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0935-9648; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 19.791 Times cited (up) 57 Open Access
Notes Iap Approved Most recent IF: 19.791; 2011 IF: 13.877
Call Number UA @ lucian @ c:irua:90103 Serial 3794
Permanent link to this record
 
 
Author Hamon, A.-L.; Verbeeck, J.; Schryvers, D.; Benedikt, J.; van den Sanden, R.M.C.M.
Title ELNES study of carbon K-edge spectra of plasma deposited carbon films Type A1 Journal article
Year 2004 Publication Journal of materials chemistry Abbreviated Journal J Mater Chem
Volume 14 Issue Pages 2030-2035
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Electron energy loss spectroscopy was used to investigate the bonding of plasma deposited carbon films. The experimental conditions include the use of a specific collection angle for which the shape of the spectra is free of the orientation dependency usually encountered in graphite due to its anisotropic structure. The first quantification process of the energy loss near-edge structure was performed by a standard fit of the collected spectrum, corrected for background and multiple scattering, with three Gaussian functions followed by a comparison with the graphite spectrum obtained under equivalent experimental conditions. In a second approach a fitting model directly incorporating the background subtraction and multiple scattering removal was applied. The final numerical results are interpreted in view of the deposition conditions of the films and the actual fitting procedure with the related choice of parameters.
Address
Corporate Author Thesis
Publisher Place of Publication Cambridge Editor
Language Wos 000222312500017 Publication Date 2004-06-28
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0959-9428;1364-5501; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 6.626 Times cited (up) 61 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:48782UA @ admin @ c:irua:48782 Serial 1025
Permanent link to this record
 
 
Author Zhou, C.; Ji, G.; Chen, Z.; Wang, M.; Addad, A.; Schryvers, D.; Wang, H.
Title Fabrication, interface characterization and modeling of oriented graphite flakes/Si/Al composites for thermal management applications Type A1 Journal article
Year 2014 Publication Materials and design Abbreviated Journal Mater Design
Volume 63 Issue Pages 719-728
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Highly thermally conductive graphite flakes (Gf)/Si/Al composites have been fabricated using Gf, Si powder and an AlSi7Mg0.3 alloy by an optimized pressure infiltration process for thermal management applications. In the composites, the layers of Gf were spaced apart by Si particles and oriented perpendicular to the pressing direction, which offered the opportunity to tailor the thermal conductivity (TC) and coefficient of thermal expansion (CTE) of the composites. Microstructural characterization revealed that the formation of a clean and tightly-adhered interface at the nanoscale between the side surface of the Gf and Al matrix, devoid of a detrimental Al4C3 phase and a reacted amorphous AlSiOC layer, contributed to excellent thermal performance along the alignment direction. With increasing volume fraction of Gf from 13.7 to 71.1 vol.%, the longitudinal (i.e. parallel to the graphite layers) TC of the composites increased from 179 to 526 W/m K, while the longitudinal CTE decreased from 12.1 to 7.3 ppm/K (matching the values of electronic components). Furthermore, the modified layers-in-parallel model better fitted the longitudinal TC data than the layers-in-parallel model and confirmed that the clean and tightly-adhered interface is favorable for the enhanced longitudinal TC.
Address
Corporate Author Thesis
Publisher Place of Publication Reigate Editor
Language Wos 000340949300086 Publication Date 2014-07-17
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0261-3069; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited (up) 61 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:118124 Serial 1166
Permanent link to this record
 
 
Author Delville, R.; Kasinathan, S.; Zhang, Z.; van Humbeeck, J.; James, R.D.; Schryvers, D.
Title Transmission electron microscopy study of phase compatibility in low hysteresis shape memory alloys Type A1 Journal article
Year 2010 Publication Philosophical magazine Abbreviated Journal Philos Mag
Volume 90 Issue 1/4 Pages 177-195
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Recent findings have linked low hysteresis in shape memory alloys with phase compatibility between austenite and martensite. To investigate the evolution of microstructure as phase compatibility increases and hysteresis is reduced, transmission electron microscopy was used to study the alloy system Ti50Ni50xPdx, where the composition is systemically tuned to approach perfect compatibility. Changes in morphology, twinning density and twinning modes are reported, along with special microstructures occurring when compatibility is achieved. In addition, the interface between austenite and a single variant of martensite was studied by high-resolution and conventional electron microscopy. The low energy configuration of the interface detailed in this article suggests that it plays an important role in the lowering of hysteresis compared to classical habit plane interfaces.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000274576500013 Publication Date 2010-01-16
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1478-6435;1478-6443; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.505 Times cited (up) 70 Open Access
Notes Multimat; FWO Approved Most recent IF: 1.505; 2010 IF: 1.304
Call Number UA @ lucian @ c:irua:79859 Serial 3718
Permanent link to this record
 
 
Author Schryvers, D.; Firstov, G.S.; Seo, J.W.; van Humbeeck, J.; Koval, Y.N.
Title Unit cell determination in CuZr martensite by EM and X-ray diffraction Type A1 Journal article
Year 1997 Publication Scripta materialia Abbreviated Journal Scripta Mater
Volume 36 Issue Pages 1119-1125
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos A1997WV99600007 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited (up) 76 Open Access
Notes Approved Most recent IF: 3.747; 1997 IF: 0.645
Call Number UA @ lucian @ c:irua:21344 Serial 3811
Permanent link to this record
 
 
Author Bals, S.; Tirry, W.; Geurts, R.; Yang, Z.; Schryvers, D.
Title High-quality sample preparation by low kV FIB thinning for analytical TEM measurements Type A1 Journal article
Year 2007 Publication Microscopy and microanalysis Abbreviated Journal Microsc Microanal
Volume 13 Issue 2 Pages 80-86
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Focused ion beam specimen preparation has been used for NiTi samples and SrTiO(3)/SrRuO(3) multilayers with prevention of surface amorphization and Ga implantation by a 2-kV cleaning procedure. Transmission electron microscopy techniques show that the samples are of high quality with a controlled thickness over large scales. Furthermore, preferential thinning effects in multicompounds are avoided, which is important when analytical transmission electron microscopy measurements need to be interpreted in a quantitative manner. The results are compared to similar measurements acquired for samples obtained using conventional preparation techniques such as electropolishing for alloys and ion milling for oxides.
Address
Corporate Author Thesis
Publisher Place of Publication Cambridge, Mass. Editor
Language Wos 000245662200002 Publication Date 2007-03-19
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1431-9276;1435-8115; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.891 Times cited (up) 82 Open Access
Notes Fwo; Goa Approved Most recent IF: 1.891; 2007 IF: 1.941
Call Number UA @ lucian @ c:irua:65850 Serial 1441
Permanent link to this record
 
 
Author Idrissi, H.; Ryelandt, L.; Veron, M.; Schryvers, D.; Jacques, P.J.
Title Is there a relationship between the stacking fault character and the activated mode of plasticity of FeMn-based austenitic steels? Type A1 Journal article
Year 2009 Publication Scripta materialia Abbreviated Journal Scripta Mater
Volume 60 Issue 11 Pages 941-944
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract By changing the testing temperature, an austenitic FeMnAlSi alloy presents either å-martensite transformation or mechanical twinning during straining. In order to understand the nucleation and growth mechanisms involved in both phenomena, defects and particularly stacking faults, were characterized by transmission electron microscopy. It is observed that the character of the stacking faults also changes (from extrinsic to intrinsic) together with the temperature and the activated mode of plasticity.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000265359900005 Publication Date 2009-02-10
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited (up) 84 Open Access
Notes Iap Approved Most recent IF: 3.747; 2009 IF: 2.949
Call Number UA @ lucian @ c:irua:77276 Serial 1751
Permanent link to this record
 
 
Author Tirry, W.; Schryvers, D.
Title Quantitative determination of strain fields around Ni4Ti3 precipitates in NiTi Type A1 Journal article
Year 2005 Publication Acta materialia Abbreviated Journal Acta Mater
Volume 53 Issue 4 Pages 1041-1049
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000226774500014 Publication Date 2004-12-14
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6454; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 5.301 Times cited (up) 97 Open Access
Notes Approved Most recent IF: 5.301; 2005 IF: 3.430
Call Number UA @ lucian @ c:irua:55686 Serial 2750
Permanent link to this record
 
 
Author Shabalovskaya, S.A.; Tian, H.; Anderegg, J.W.; Schryvers, D.U.; Carroll, W.U.; van Humbeeck, J.
Title The influence of surface oxides on the distribution and release of nickel from Nitinol wires Type A1 Journal article
Year 2009 Publication Biomaterials Abbreviated Journal Biomaterials
Volume 30 Issue 4 Pages 468-477
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract The patterns of Ni release from Nitinol vary depending on the type of material (NiTi alloys with low or no processing versus commercial wires or sheets). A thick TiO2 layer generated on the wire surface during processing is often considered as a reliable barrier against Ni release. The present study of Nitinol wires with surface oxides resulting from production was conducted to identify the sources of Ni release and its distribution in the surface sublayers. The chemistry and topography of the surfaces of Nitinol wires drawn using different techniques were studied with XPS and SEM. The distribution of Ni into surface depth and the surface oxide thickness were evaluated using Auger spectroscopy, TEM with FIB and ELNES. Ni release was estimated using either ICPA or AAS. Potentiodynamic potential polarization of selected wires was performed in as-received state with no strain and in treated strained samples. Wire samples in the as-received state showed low breakdown potentials (200 mV); the improved corrosion resistance of these wires after treatment was not affected by strain. It is shown how processing techniques affect surface topography, chemistry and also Ni release. Nitinol wires with the thickest surface oxide TiO2 (up to 720 nm) showed the highest Ni release, attributed to the presence of particles of essentially pure Ni whose number and size increased while approaching the interface between the surface and the bulk. The biological implications of high and lasting Ni release are also discussed.
Address
Corporate Author Thesis
Publisher Place of Publication Guildford Editor
Language Wos 000262065500006 Publication Date 2008-11-09
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0142-9612; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 8.402 Times cited (up) 102 Open Access
Notes Fwo; G.0465.05 Approved Most recent IF: 8.402; 2009 IF: 7.365
Call Number UA @ lucian @ c:irua:72320 Serial 1641
Permanent link to this record
 
 
Author Delville, R.; Malard, B.; Pilch, J.; Schryvers, D.
Title Microstructure changes during non-conventional heat treatment of thin NiTi wires by pulsed electric current studied by transmission electron microscopy Type A1 Journal article
Year 2010 Publication Acta materialia Abbreviated Journal Acta Mater
Volume 58 Issue 13 Pages 4503-4515
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Transmission electron microscopy, electrical resistivity measurements and mechanical testing were employed to investigate the evolution of microstructure and functional superelastic properties of 0.1 mm diameter as-drawn NiTi wires subjected to a non-conventional heat treatment by controlled electric pulse currents. This method enables a better control of the recovery and recrystallization processes taking place during the heat treatment and accordingly a better control on the final microstructure. Using a stepwise approach of millisecond pulse annealing, it is shown how the microstructure evolves from a severely deformed state with no functional properties to an optimal nanograined microstructure (2050 nm) that is partially recovered through polygonization and partially recrystallized and that has the best functional properties. Such a microstructure is highly resistant against dislocation slip upon cycling, while microstructures annealed for longer times and showing mostly recrystallized grains were prone to dislocation slip, particularly as the grain size exceeds 200 nm.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000279787100020 Publication Date 2010-06-02
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6454; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 5.301 Times cited (up) 110 Open Access
Notes Multimat; FWO IAA Approved Most recent IF: 5.301; 2010 IF: 3.791
Call Number UA @ lucian @ c:irua:83279 Serial 2062
Permanent link to this record