| Home | << 1 2 3 4 5 >> |
|
| Records | |||||
|---|---|---|---|---|---|
| Author | Milis, K.; Peremans, H.; Van Passel, S. | ||||
| Title | The impact of policy on microgrid economics : a review | Type | A1 Journal article | ||
| Year | 2018 | Publication | Renewable & Sustainable Energy Reviews | Abbreviated Journal | Renew Sust Energ Rev |
| Volume | 81 | Issue | 2 | Pages | 3111-3119 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM) | ||||
| Abstract | This paper investigates the impact of government policy on the optimal design of microgrid systems from an economic cost minimisation perspective, and provides both an overview of the current state of the art of the field, as well as highlighting possible avenues of future research. Integer programming, to select microgrid components and to economically dispatch these components, is the optimisation method of choice in the literature. Using this methodology, a broad range of policy topics is investigated: impact of carbon taxation, economic incentives and mandatory emissions reduction or mandatory minimum percentage participation of renewables in local generation. However, the impact of alternative tariff systems, such as capacity tariffs are still unexplored. Additionally, the investigated possible benefits of microgrids are confined to emissions reduction and a possible decrease in total energy procurement costs. Possible benefits such as increased security of supply, increased power quality or energy independence are not investigated yet. Under the expected policy measures the optimal design of a microgrid will be based on a CHP-unit to provide both heat and electricity, owning to the lower capital costs associated with CHP-units when compared to those associated with renewable technologies. This means that current economic analyses indicate that the adoption of renewable energy sources within microgrids is not economically rational. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000417078200117 | Publication Date | 2017-09-12 | |
| Series Editor | Series Title  |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1364-0321; 1879-0690 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 8.05 | Times cited | 11 | Open Access | |
| Notes | ; ; | Approved | Most recent IF: 8.05 | ||
| Call Number | UA @ admin @ c:irua:145397 | Serial | 6213 | ||
| Permanent link to this record | |||||
| Author | Lizin, S.; Van Passel, S.; Vranken, L. | ||||
| Title | Heterogeneity in the solar-powered consumer electronics market : a discrete choice experiments study | Type | A1 Journal article | ||
| Year | 2016 | Publication | Solar Energy Materials And Solar Cells | Abbreviated Journal | Sol Energ Mat Sol C |
| Volume | 156 | Issue | Pages | 140-146 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM) | ||||
| Abstract | Solar-powered consumer electronics are a likely starting point for organic photovoltaic (OPV) market development. Therefore, a generic discrete choice experiments study can determine how Flemish consumers value solar-cell characteristics for solar-poweied consumer electronics. Such characteristics include efficiency, lifetime, aesthetics, integratability, and price. We contribute to the literature by investigating preference heterogeneity in a solar-power niche market with an experimental design with a fixed reference alternative. The error components random parameter logit (ECRPL) with interactions provides a better fit than the latent class (LC) model for our choice data. The main effects had the expected signs. Consequently, aesthetics and integratability are OPV's assets. Nevertheless, heterogeneity puts the results that are valid for the average consumer into perspective. Based on our findings, OPV commercialization efforts should target the experienced, impatient user who highly values design and functionality. (C) 2016 Elsevier B.V. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000383304100015 | Publication Date | 2016-06-27 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0927-0248 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.784 | Times cited | 2 | Open Access | |
| Notes | ; Sebastien Lizin thanks the Research Foundation Flanders (FWO) for funding his postdoctoral mandate with Grant number 12G5415N, without which it would have been impossible to revise this work. ; | Approved | Most recent IF: 4.784 | ||
| Call Number | UA @ admin @ c:irua:137107 | Serial | 6207 | ||
| Permanent link to this record | |||||
| Author | Jorli, M.; Van Passel, S.; Saghdel, H.S. | ||||
| Title | External costs from fossil electricity generation : a review of the applied impact pathway approach | Type | A1 Journal article | ||
| Year | 2018 | Publication | Energy & Environment | Abbreviated Journal | Energ Environ-Uk |
| Volume | 29 | Issue | 5 | Pages | 635-648 |
| Keywords | A1 Journal article; Engineering Management (ENM) | ||||
| Abstract | This paper reviews and compares 11 studies that have estimated external costs of fossil electricity generation by benefits transfer. These studies include 13 countries and most of these countries are developing countries. The impact pathway approach is applied to estimate the environmental impact arising from fossil fuel-fired power plant's air emission and the related damages on human health. The estimated damages are used to value the monetary external costs from fossil fuel electricity generation. The estimated external costs in the 13 countries vary from 0.51 to 213.5 USD (2005) per MWh due to differences in fossil fuel quality, location, technology, and efficiency of power plants and additionally differences in assumptions, monetization values, and impact estimations. Accounting for these externalities can indicate the actual costs of fossil energy. The results can be applied by policy makers to take measures to avoid additional costs and to apply newer and cleaner energy sources. The described methods in the selected studies for estimating the external costs with respect to incomplete local data can be applied as a useful example for other developing countries. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000440685300001 | Publication Date | 2018-03-02 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0958-305x | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 0.302 | Times cited | 3 | Open Access | |
| Notes | ; ; | Approved | Most recent IF: 0.302 | ||
| Call Number | UA @ admin @ c:irua:153136 | Serial | 6201 | ||
| Permanent link to this record | |||||
| Author | Maes, D.; Van Passel, S. | ||||
| Title | Effective bioeconomy policies for the uptake of innovative technologies under resource constraints | Type | A1 Journal article | ||
| Year | 2019 | Publication | Biomass & Bioenergy | Abbreviated Journal | Biomass Bioenerg |
| Volume | 120 | Issue | 120 | Pages | 91-106 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM) | ||||
| Abstract | The bioeconomy is a shared vision for a future European industry entirely based on organic matter. Authorities support this technological development with subsidies and policies stimulating R&D. One major limitation for the bioeconomy is that R&D and industrial growth require the continuous availability of biomass as a primary resource. This resource dependence is already present during the formative years of new biobased innovations and influences the pilot and demonstration phase of the development. Traditionally, it is assumed that public support for pilot and demonstration initiatives may overcome this hurdle. In this paper, we investigate how this resource constraint limits the effectiveness of bioeconomy policies. The future development of the biobased sector is simulated including the inherent dependence of industrial activity on biomass. We simulate the future growth and technological diversity of an emerging biotechnological sector: the sector of manure transformation in Belgium. The paper reports the evolutions for three policy scenarios. The model explicitly accounts for endogenous innovation and knowledge transfer mechanisms. The results show that policies may have an important impact on the sector structure in the long run, but the sector growth remains ultimately constrained by the availability of inputs. So bioeconomy policies to promote innovation will be less effective, unless mechanisms are included to alleviate the resource constraint. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000454887700011 | Publication Date | 2018-11-22 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0961-9534 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.219 | Times cited | 3 | Open Access | |
| Notes | ; ; | Approved | Most recent IF: 3.219 | ||
| Call Number | UA @ admin @ c:irua:156757 | Serial | 6191 | ||
| Permanent link to this record | |||||
| Author | De Schepper, E.; Van Passel, S.; Lizin, S. | ||||
| Title | Economic benefits of combining clean energy technologies : the case of solar photovoltaics and battery electric vehicles | Type | A1 Journal article | ||
| Year | 2015 | Publication | International Journal Of Energy Research | Abbreviated Journal | Int J Energ Res |
| Volume | 39 | Issue | 8 | Pages | 1109-1119 |
| Keywords | A1 Journal article; Economics; Engineering sciences. Technology; Engineering Management (ENM) | ||||
| Abstract | The combined use of clean technologies can lead amongst other benefits to reduced environmental impacts, improved system efficiencies, better management of land scarcity, and diminishment of the effect of power variability of intermittent clean energy sources. Nonetheless, private investors facing budgetary constraints will only opt to invest in the combination of technologies if the latter is more profitable than the investment in a single technology. The aim of the paper is to provide a systematic model for decision makers that allows them to evaluate the profitability of any random combination of technologies under budgetary constraints, and to compare this profitability with that of the individual projects in isolation. This research goes beyond the state of art in the field of financial management and more specifically in the field of the rationing of capital amongst interdependent projects, by developing a method to calculate the payoff of interdependent projects undertaken together. Moreover, this paper develops a computational model from the investor's point of view, of which the purpose is threefold: First, the model allows to directly compare the economic payoff of individual complementary technologies with the economic payoff of their integrated combination, under budgetary constraints. Second, the model calculates economic synergies labeled benefits of combined technologies' (BOCT) when combining complementary technologies. Third, the model explains the rationalization behind the presence of BOCT. The model exemplifies an ex ante cost benefit analysis developed for business and non-governmental use. A four step methodology is proposed and illustrated by means of a case study of PV solar power and battery electric vehicles (BEVs) for a small Belgian enterprise. Results show that at low electricity prices (<Euro0.112/kWh) it is most profitable to invest in BEVs. When the price of electricity rises (>Euro0.134/kWh), investment in exclusively PV becomes most attractive. In all other cases, it is more profitable to invest in the combination of both technologies. Copyright (c) 2015 John Wiley & Sons, Ltd. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000355732200006 | Publication Date | 2015-03-21 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0363-907x | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.598 | Times cited | 14 | Open Access | |
| Notes | ; Sebastien Lizin would like to thank the Research Foundation Flanders (FWO), grant number 12G5415N, for their funding without which it would have been impossible to review this work. ; | Approved | Most recent IF: 2.598; 2015 IF: 2.418 | ||
| Call Number | UA @ admin @ c:irua:127535 | Serial | 6188 | ||
| Permanent link to this record | |||||
| Author | Srivastava, A.; Van Passel, S.; Laes, E. | ||||
| Title | Dissecting demand response : a quantile analysis of flexibility, household attitudes, and demographics | Type | A1 Journal article | ||
| Year | 2019 | Publication | Energy Research and Social Science | Abbreviated Journal | |
| Volume | 52 | Issue | 52 | Pages | 169-180 |
| Keywords | A1 Journal article; Economics; Engineering Management (ENM) | ||||
| Abstract | Demand response (DR) can aid with grid integration of renewables, ensuring security of supply, and reducing generation costs. However, not enough is known about how residential customers’ perceptions of DR shape their response to such programs. This paper offers a deeper understanding of – and reveals the heterogeneity in – this relationship by conducting a quantile regression analysis of a Belgian DR trial, combining data on response with information on household attitudes towards smart appliances. Results overall suggest that improving response requires subtle shifts in electricity consumption behaviour, which can be achieved through changes in user perceptions. Specifically, if customers are inclined to be flexible, a stronger perception of smart appliances as being beneficial can greatly improve response. With those who are less flexible, the cost of smart appliances is a bigger concern. Thus, when designing DR programs, policymakers should aim to promote modest behaviour changes – so as to minimise inconvenience – in customers, by improving awareness on the benefits of smart appliances. Uptake of such DR programs may be improved by explaining the financial benefits or offering incentives to less flexible population segments. Lastly, improving response among older population segments will require a deeper investigation into their concerns. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000468215900016 | Publication Date | 2019-03-04 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2214-6296 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | Times cited | 1 | Open Access | ||
| Notes | ; This work continued on the results and data of the project Linear that was supported by the Flemish Ministry of Science and organised by the Institute for Science and Technology (IWT). The authors gratefully acknowledge the support extended by Wim Cardinaels at VITO in helping them access the underlying Linear data. ; | Approved | Most recent IF: NA | ||
| Call Number | UA @ admin @ c:irua:158910 | Serial | 6183 | ||
| Permanent link to this record | |||||
| Author | Van Dael, M.; Van Passel, S.; Pelkmans, L.; Guisson, R.; Swinnen, G.; Schreurs, E. | ||||
| Title | Determining potential locations for biomass valorization using a macro screening approach | Type | A1 Journal article | ||
| Year | 2012 | Publication | Biomass & Bioenergy | Abbreviated Journal | Biomass Bioenerg |
| Volume | 45 | Issue | Pages | 175-186 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM) | ||||
| Abstract | European policy states that by 2020 at least 20% of final energy consumption should come from renewable energy sources. Biomass as a renewable energy source cannot be disregarded in order to attain this target. In this study a macro screening approach is developed to determine potential locations for biomass valorization in a specified region. The approach consists of five steps: (1) criteria determination, (2) data gathering, (3) weight assignment, (4) final score, (5) spatial representation. The resulting outcome provides a first well balanced scan of the possibilities for energy production using regional biomass. This way policy makers and investors can be supported and motivated to study the possibilities of building energy production plants at specific locations in more detail, which can be described as a 'micro-screening'. In our case study the approach is applied to determine the potentially interesting locations to establish a biomass project. The region has been limited to the forty-four communities in the province of Limburg (Belgium). The macro screening approach has shown to be very effective since the amount of interesting locations has been reduced drastically. (c) 2012 Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000308384500019 | Publication Date | 2012-06-30 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0961-9534 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.219 | Times cited | 23 | Open Access | |
| Notes | ; The authors gratefully acknowledge the financial support from INTERREG and the province of Limburg. Special thanks to our colleague Thomas Voets for his effort in making the GIS maps. Moreover, the authors would like to thank the two anonymous reviewers for their valuable comments. ; | Approved | Most recent IF: 3.219; 2012 IF: 2.975 | ||
| Call Number | UA @ admin @ c:irua:127554 | Serial | 6178 | ||
| Permanent link to this record | |||||
| Author | De Schepper, E.; Van Passel, S.; Manca, J.; Thewys, T. | ||||
| Title | Combining photovoltaics and sound barriers : a feasibility study | Type | A1 Journal article | ||
| Year | 2012 | Publication | Renewable Energy | Abbreviated Journal | Renew Energ |
| Volume | 46 | Issue | Pages | 297-303 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM) | ||||
| Abstract | In the light of global warming, renewables such as solar photovoltaics (PV) are important to decrease greenhouse gas emissions. An important issue regarding implementation of solar panels on large scale, is the limited available area. Therefore, it can be interesting to combine PV with alternative applications, as a ways of not requiring “additional” space. One example is a photovoltaic noise barrier (PVNB), where a noise barrier located along a highway or railway is used as substructure for PV modules. Even though a PVNB is not a novel concept, the absence of economic assessments in literature can be a barrier to their wider implementation. In this paper, a feasibility study of a PVNB in Belgium is conducted, using a cost benefit analysis including a Monte Carlo sensitivity analysis. Besides purely economic aspects, also ecological benefits are monetized. The sensitivity analysis indicates that the ecological benefit of noise reduction, which is valuated using a noise sensitivity depreciation index applied to real estate prices, is of major importance in determining the net present value of the case study. On the contrary, the impact of reducing CO2 emissions seems to be negligible when expressed in monetary terms. The results suggest that the PVNB as a whole and also its separate components -.e. the PV array and the noise barrier can be profitable projects, when ecological benefits are included. (C) 2012 Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000305169400036 | Publication Date | 2012-04-06 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0960-1481 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.357 | Times cited | 12 | Open Access | |
| Notes | ; ; | Approved | Most recent IF: 4.357; 2012 IF: 2.989 | ||
| Call Number | UA @ admin @ c:irua:127555 | Serial | 6170 | ||
| Permanent link to this record | |||||
| Author | Srivastava, A.; Van Passel, S.; Laes, E. | ||||
| Title | Assessing the success of electricity demand response programs : a meta-analysis | Type | A1 Journal article | ||
| Year | 2018 | Publication | Energy Research and Social Science | Abbreviated Journal | |
| Volume | 40 | Issue | 40 | Pages | 110-117 |
| Keywords | A1 Journal article; Economics; Engineering Management (ENM) | ||||
| Abstract | This paper conducts a meta-analysis of 32 electricity demand response programs in the residential sector to understand whether their success is dependent on specific characteristics. The paper analyses several regression models using various combinations of variables that capture the designs of the programs and the socio-economic conditions in which the programs are implemented. The analysis reveals that demand response programs are more likely to succeed in highly urbanized areas, in areas where economic growth rates are high, and in areas where the renewable energy policy is favorable. These findings provide useful guidance in determining where and how to implement future demand response programs. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000430737800014 | Publication Date | 2017-12-28 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2214-6296 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | 18 | Open Access | ||
| Notes | ; ; | Approved | Most recent IF: NA | ||
| Call Number | UA @ admin @ c:irua:149027 | Serial | 6154 | ||
| Permanent link to this record | |||||
| Author | Compernolle, T.; Witters, N.; Van Passel, S.; Thewys, T. | ||||
| Title | Analyzing a self-managed CHP system for greenhouse cultivation as a profitable way to reduce CO2-emissions | Type | A1 Journal article | ||
| Year | 2011 | Publication | Energy | Abbreviated Journal | Energy |
| Volume | 36 | Issue | 4 | Pages | 1940-1947 |
| Keywords | A1 Journal article; Engineering sciences. Technology | ||||
| Abstract | To counter global warming, a transition to a low-carbon economy is needed. The greenhouse sector can contribute by installing Combined Heat and Power (CHP) systems, known for their excellent energy efficiency. Due to the recent European liberalization of the energy market, glass horticulturists have the opportunity to sell excess electricity to the market and by tailored policy and support measures, regional governments can fill the lack of technical and economic knowledge, causing initial resistance. This research investigates the economic and environmental opportunities using two detailed cases applying a self managed cogeneration system. The Net Present Value is calculated to investigate the economic feasibility. The Primary Energy Saving, the CO2 Emission Reduction indicator and an Emission Balance are applied to quantify the environmental impact. The results demonstrate that a self-managed CHP system is economic viable and that CO2 emissions are reduced. (C) 2010 Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000289605900014 | Publication Date | 2010-04-03 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0360-5442 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.52 | Times cited | 19 | Open Access | |
| Notes | ; ; | Approved | Most recent IF: 4.52; 2011 IF: 3.487 | ||
| Call Number | UA @ admin @ c:irua:127561 | Serial | 6152 | ||
| Permanent link to this record | |||||
| Author | Van Dael, M.; Van Passel, S.; Pelkmans, L.; Guisson, R.; Reumermann, P.; Luzardo, N.M.; Witters, N.; Broeze, J. | ||||
| Title | A techno-economic evaluation of a biomass energy conversion park | Type | A1 Journal article | ||
| Year | 2013 | Publication | Applied Energy | Abbreviated Journal | Appl Energ |
| Volume | 104 | Issue | Pages | 611-622 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM) | ||||
| Abstract | Biomass as a renewable energy source has many advantages and is therefore recognized as one of the main renewable energy sources to be deployed in order to attain the target of 20% renewable energy use of final energy consumption by 2020 in Europe. In this paper the concept of a biomass Energy Conversion Park (ECP) is introduced. A biomass ECP can be defined as a synergetic, multi-dimensional biomass conversion site with a highly integrated set of conversion technologies in which a multitude of regionally available biomass (residue) sources are converted into energy and materials. A techno-economic assessment is performed on a case study in the Netherlands to illustrate the concept and to comparatively assess the highly integrated system with two mono-dimensional models. The three evaluated models consist of (1) digestion of the organic fraction of municipal solid waste, (2) co-digestion of manure and co-substrates, and (3) integration. From a socio-economic point of view it can be concluded that it is economically and energetically more interesting to invest in the integrated model than in two separate models. The integration is economically feasible and environmental benefits can be realized. For example, the integrated model allows the implementation of a co-digester. Unmanaged manure would otherwise represent a constant pollution risk. However, from an investor's standpoint one should firstly invest in the municipal solid waste digester since the net present value (NPV) of this mono-dimensional model is higher than that of the multi-dimensional model. A sensitivity analysis is performed to identify the most influencing parameters. Our results are of interest for companies involved in the conversion of biomass. The conclusions are useful for policy makers when deciding on policy instruments concerning manure processing or biogas production. (C) 2012 Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000316152700062 | Publication Date | 2012-12-25 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0306-2619 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 7.182 | Times cited | 45 | Open Access | |
| Notes | ; We would like to thank the editor and the anonymous referees for their helpful suggestions and insightful comments that have significantly improved the paper. Furthermore, the authors gratefully acknowledge the financial support from INTERREG and the province of Limburg (Belgium). Also, we would like to thank all remaining partners of the ECP project (Eloi Schreurs, Dries Maes, Kristian Coppoolse, Han ten Berge, Bert Annevelink, Nathalie Devriendt, Erwin Cornelissen, Hannes Pieper, Pieter Vollaard, Jan Venselaar, and Hessel Abbink Spaink) for their support and contributions. Finally, we would like to express our gratitude towards the organization of the eighth International Conference on Renewable Resources and Biorefineries in Toulouse (France) for giving us the opportunity to present and thereby fine-tune our work. ; | Approved | Most recent IF: 7.182; 2013 IF: 5.261 | ||
| Call Number | UA @ admin @ c:irua:127552 | Serial | 6145 | ||
| Permanent link to this record | |||||
| Author | Lizin, S.; Leroy, J.; Delvenne, C.; Dijk, M.; De Schepper, E.; Van Passel, S. | ||||
| Title | A patent landscape analysis for organic photovoltaic solar cells : identifying the technology's development phase | Type | A1 Journal article | ||
| Year | 2013 | Publication | Renewable Energy | Abbreviated Journal | Renew Energ |
| Volume | 57 | Issue | Pages | 5-11 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM) | ||||
| Abstract | Organic photovoltaics (OPV) have developed into a vast research area. Progress in various directions has made it difficult to monitor the technology's precise development state. We offer a patent landscape analysis over all OPV devices, their substrates and encapsulation materials to provide an overview of patenting activity from a historical, organizational, geographical and technological point of view. Such an exercise is instrumental for private companies and research institutes aiming at both internal or external technology creation. We discuss our findings in the context of the Industrial Life Cycle model and find OPV still residing in the fluid technology development phase. Technology development is still following an exponential growth path, with the majority of patents coming from the Asian continent and in general private companies. For devices, the main technological focus can be traced back to the “H01L-031” international patent classification (IPC) main group. For the queried substrates, the most attention has gone to glass, but paper and textile have drawn significant interest too. Finally, encapsulation is found to be a less mature research field given the smaller number of patent families. The latter shows that the technology has not matured to the level where processing is carried out on a commercial scale. (C) 2013 Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000319025000002 | Publication Date | 2013-02-13 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0960-1481 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.357 | Times cited | 18 | Open Access | |
| Notes | ; The authors are much obliged to INTERREG for their financial support of the ORGANEXT project (www.organext.org), without which it would have been impossible to conduct this research. ; | Approved | Most recent IF: 4.357; 2013 IF: 3.361 | ||
| Call Number | UA @ admin @ c:irua:127551 | Serial | 6143 | ||
| Permanent link to this record | |||||
| Author | Daems, N.; De Mot, B.; Choukroun, D.; Van Daele, K.; Li, C.; Hubin, A.; Bals, S.; Hereijgers, J.; Breugelmans, T. | ||||
| Title | Nickel-containing N-doped carbon as effective electrocatalysts for the reduction of CO2 to CO in a continuous-flow electrolyzer | Type | A1 Journal article | ||
| Year | 2019 | Publication | Sustainable energy & fuels | Abbreviated Journal | |
| Volume | 4 | Issue | 4 | Pages | 1296-1311 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Applied Electrochemistry & Catalysis (ELCAT) | ||||
| Abstract | Nickel-containing N-doped carbons were synthesized for the electrochemical reduction of CO2 to CO, which is a promising approach to reduce the atmospheric CO2 levels and its negative impact on the environment. Unfortunately, poor performance (activity, selectivity and/or stability) is still a major hurdle for the economical implementation of this type of materials. The electrocatalysts were prepared through an easily up-scalable and easily tunable method based on the pyrolysis of Ni-containing N-doped carbons. Ni–N–AC–B1 synthesized with a high relative amount of nitrogen and nickel with respect to carbon, was identified as the most promising candidate for this reaction based on its partial CO current density (4.2 mA cm−2), its overpotential (0.57 V) and its faradaic efficiency to CO (>99%). This results in unprecedented values for the current density per g active sites (690 A g−1 active sites). Combined with its decent stability and its high performance in an actual electrolyzer setup, this makes it a promising candidate for the electrochemical reduction of CO2 to CO on a larger scale. Finally, the evaluation of this kind of material in a flow-cell setup has been limited and to the best of our knowledge never included an evaluation of several crucial parameters (e.g. electrolyte type, anode composition and membrane type) and is an essential investigation in the move towards up-scaling and ultimately industrial application of this technique. This study resulted in an optimal cell configuration, consisting of Pt as an anode, Fumatech® as the membrane and 1 M KHCO3 and 2 M KOH as catholyte and anolyte, respectively. In conclusion, this research offers a unique combination of electrocatalyst development and reactor optimization. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000518690900030 | Publication Date | 2019-12-20 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | ||
| Impact Factor | Times cited | 14 | Open Access | OpenAccess | |
| Notes | ; The authors acknowledge sponsoring from the research foundation of Flanders (FWO) in the frame of a post-doctoral grant (12Y3919N – ND). J. Hereijgers was supported through a postdoctoral fellowship (28761) of the Research Foundation Flanders (FWO). This project was co-funded by the Interreg 2 Seas-Program 2014-2020, co-.nanced by the European Fund for Regional Development in the frame of subsidiary contract nr 2S03-019. This work was further performed in the framework of the Catalisti cluster SBO project CO2PERATE (“All renewable CCU based on formic acid integrated in an industrial microgrid”), with the.nancial support of VLAIO (Flemish Agency for Innovation and Entrepreneurship). This project.nally received funding from the European Research Council (ERC Consolidator Grant 815128, REALNANO). We thank Karen Leyssens for helping with the N<INF>2</INF> physisorption measurements and Kitty Baert (VUB) for analyzing the samples with XPS and Raman. ; sygma | Approved | Most recent IF: NA | ||
| Call Number | UA @ admin @ c:irua:165482 | Serial | 6311 | ||
| Permanent link to this record | |||||
| Author | Bogaerts, A.; Centi, G. | ||||
| Title | Plasma Technology for CO2 Conversion: A Personal Perspective on Prospects and Gaps | Type | A1 Journal article | ||
| Year | 2020 | Publication | Frontiers in energy research | Abbreviated Journal | Front. Energy Res. |
| Volume | 8 | Issue | Pages | ||
| Keywords | A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | There is increasing interest in plasma technology for CO2 conversion because it can operate at mild conditions and it can store fluctuating renewable electricity into value-added compounds and renewable fuels. This perspective paper aims to provide a view on the future for non-specialists who want to understand the role of plasma technology in the new scenario for sustainable and low-carbon energy and chemistry. Thus, it is prepared to give a personal view on future opportunities and challenges. First, we introduce the current state-of-the-art and the potential of plasma-based CO2 conversion. Subsequently, we discuss the challenges to overcome the current limitations and to apply plasma technology on a large scale. The final section discusses the general context and the potential benefits of plasma-based CO2 conversion for our life and the impact on climate change. It also includes a brief analysis on the future scenario for energy and chemical production, and how plasma technology may realize new paths for CO2 utilization. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000553392300001 | Publication Date | 2020-07-07 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2296-598X | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.4 | Times cited | Open Access | OpenAccess | |
| Notes | We acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 810182 – SCOPE ERC Synergy project). We thank A. Berthelot, M. Ramakers, R. Snoeckx, G. Trenchev, and V. Vermeiren for providing the figures used in this article. | Approved | Most recent IF: 3.4; 2020 IF: NA | ||
| Call Number | PLASMANT @ plasmant @c:irua:170136 | Serial | 6390 | ||
| Permanent link to this record | |||||
| Author | Yan, X.F.; Chen, Q.; Li, L.L.; Guo, H.Z.; Peng, J.Z.; Peeters, F.M. | ||||
| Title | High performance piezotronic spin transistors using molybdenum disulfide nanoribbon | Type | A1 Journal article | ||
| Year | 2020 | Publication | Nano Energy | Abbreviated Journal | Nano Energy |
| Volume | 75 | Issue | Pages | 104953 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT) | ||||
| Abstract | Two-dimensional (2D) materials are promising candidates for atomic-scale piezotronics and piezophototronics. Quantum edge states show fascinating fundamental physics such as nontrivial topological behavior and hold promising practical applications for low-power electronic devices. Here, using the tight-binding approach and quantum transport simulations, we investigate the piezotronic effect on the spin polarization of edge states in a zigzag-terminated monolayer MoS2 nanoribbon. We find that the strain-induced piezoelectric potential induces a phase transition of edge states from metal to semiconductor. However, in the presence of exchange field, edge states become semi-metallic with significant spin splitting and polarization that can be tuned by external strain. We show that quantum transport conductance exhibits a 100% spin polarization over a wide range of strain magnitudes. This effect is used in a propose prototype of piezotronic spin transistor. Our results provide a fundamental understanding of the piezotronic effect on edge states in zigzag monolayer MoS2 nanoribbons and are relevant for designing high-performance piezotronic spin devices. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000560729200011 | Publication Date | 2020-05-24 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2211-2855 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 17.6 | Times cited | 17 | Open Access | |
| Notes | ; This work was supported by Hunan Provincial Natural Science Foundation of China (Nos. 2015JJ2040, 2018JJ2078), Scientific Research Fund of Hunan Provincial Education Department (19A106), and the Funeral Service Foundation (FWO-VI). ; | Approved | Most recent IF: 17.6; 2020 IF: 12.343 | ||
| Call Number | UA @ admin @ c:irua:171123 | Serial | 6535 | ||
| Permanent link to this record | |||||
| Author | Erfurt, D.; Koida, T.; Heinemann, M.D.; Li, C.; Bertram, T.; Nishinaga, J.; Szyszka, B.; Shibata, H.; Klenk, R.; Schlatmann, R. | ||||
| Title | Impact of rough substrates on hydrogen-doped indium oxides for the application in CIGS devices | Type | A1 Journal article | ||
| Year | 2020 | Publication | Solar Energy Materials And Solar Cells | Abbreviated Journal | Sol Energ Mat Sol C |
| Volume | 206 | Issue | Pages | 110300 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Indium oxide based transparent conductive oxides (TCOs) are promising contact layers in solar cells due to their outstanding electrical and optical properties. However, when applied in Cu(In,Ga)Se-2 or Si-hetero-junction solar cells the specific roughness of the material beneath can affect the growth and the properties of the TCO. We investigated the electrical properties of hydrogen doped and hydrogen-tungsten co-doped indium oxides grown on rough Cu(In,Ga)Se-2 samples as well as on textured and planar glass. At sharp ridges and V-shaped valleys crack-shaped voids form inside the indium oxide films, which limit the effective electron mobility of the In2O3:H and In2O3:H,W thin films. This was found for films deposited by magnetron sputtering and reactive plasma deposition at several deposition parameters, before as well as after annealing and solid phase crystallization. This suggests universal behavior that will have a wide impact on solar cell devices. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000519653800038 | Publication Date | 2019-11-29 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0927-0248 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 6.9 | Times cited | 5 | Open Access | OpenAccess |
| Notes | ; This work was supported by the German Federal Ministry for Economic Affairs and Energy under contract number 0325762G (TCO4CIGS). The authors thank M. Hartig, K. Mayer-Stillrich, I. Dorbandt, B. Bunn, M. Kirsch for technical support. C. Li is grateful for financial support from Max Planck Society, Germany and technical support from the MPI FKF StEM group members. ; | Approved | Most recent IF: 6.9; 2020 IF: 4.784 | ||
| Call Number | UA @ admin @ c:irua:168668 | Serial | 6544 | ||
| Permanent link to this record | |||||
| Author | Mortazavi, B.; Bafekry, A.; Shahrokhi, M.; Rabczuk, T.; Zhuang, X. | ||||
| Title | ZnN and ZnP as novel graphene-like materials with high Li-ion storage capacities | Type | A1 Journal article | ||
| Year | 2020 | Publication | Materials today energy | Abbreviated Journal | |
| Volume | 16 | Issue | Pages | Unsp 100392-8 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT) | ||||
| Abstract | In this work, we employed first-principles density functional theory (DFT) calculations to investigate the dynamical and thermal stability of graphene-like ZnX (X = N, P, As) nanosheets. We moreover analyzed the electronic, mechanical and optical properties of these novel two-dimensional (2D) systems. Acquired phonon dispersion relations reveal the absence of imaginary frequencies and thus confirming the dynamical stability of predicted monolayers. According to ab-initio molecular dynamics results however only ZnN and ZnP exhibit the required thermally stability. The elastic modulus of ZnN, ZnP and ZnAs are estimated to be 31, 21 and 17 N/m, respectively, and the corresponding tensile strengths values are 6.0, 4.9 and 4.0 N/m, respectively. Electronic band structure analysis confirms the metallic electronic character for the predicted monolayers. Results for the optical characteristics also indicate a reflectivity of 100% at extremely low energy levels, which is desirable for photonic and optoelectronic applications. According to our results, graphene-like ZnN and ZnP nanosheets can yield high capacities of 675 and 556 mAh/g for Li-ion storage, respectively. Acquired results confirm the stability and acceptable strength of ZnN and ZnP nanosheets and highlight their attractive application prospects in optical and energy storage systems. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000539083500049 | Publication Date | 2020-02-21 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2468-6069 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 9.3 | Times cited | 13 | Open Access | |
| Notes | ; B. M. and X. Z. appreciate the funding by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany's Excellence Strategy within the Cluster of Excellence PhoenixD (EXC 2122, Project ID 390833453). ; | Approved | Most recent IF: 9.3; 2020 IF: NA | ||
| Call Number | UA @ admin @ c:irua:169752 | Serial | 6655 | ||
| Permanent link to this record | |||||
| Author | Khelifi, S.; Brammertz, G.; Choubrac, L.; Batuk, M.; Yang, S.; Meuris, M.; Barreau, N.; Hadermann, J.; Vrielinck, H.; Poelman, D.; Neyts, K.; Vermang, B.; Lauwaert, J. | ||||
| Title | The path towards efficient wide band gap thin-film kesterite solar cells with transparent back contact for viable tandem application | Type | A1 Journal article | ||
| Year | 2021 | Publication | Solar Energy Materials And Solar Cells | Abbreviated Journal | Sol Energ Mat Sol C |
| Volume | 219 | Issue | Pages | 110824 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Wide band gap thin-film kesterite solar cell based on non-toxic and earth-abundant materials might be a suitable candidate as a top cell for tandem configuration in combination with crystalline silicon as a bottom solar cell. For this purpose and based on parameters we have extracted from electrical and optical characterization techniques of Cu2ZnGeSe4 absorbers and solar cells, a model has been developed to describe the kesterite top cell efficiency limitations and to investigate the different possible configurations with transparent back contact for fourterminal tandem solar cell application. Furthermore, we have studied the tandem solar cell performance in view of the band gap and the transparency of the kesterite top cell and back contact engineering. Our detailed analysis shows that a kesterite top cell with efficiency > 14%, a band gap in the range of 1.5-1.7 eV and transparency above 80% at the sub-band gaps photons energies are required to achieve a tandem cell with higher efficiency than with a single silicon solar cell. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000591683500002 | Publication Date | 2020-10-08 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0927-0248 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.784 | Times cited | Open Access | OpenAccess | |
| Notes | The authors would like to acknowledge the SWInG project financed by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 640868 and the Research Foundation Flanders-Hercules Foundation (FWO-Vlaanderen, project No AUGE/13/16:FT-IMAGER). | Approved | Most recent IF: 4.784 | ||
| Call Number | EMAT @ emat @c:irua:174337 | Serial | 6706 | ||
| Permanent link to this record | |||||
| Author | Herzog, M.J.; Gauquelin, N.; Esken, D.; Verbeeck, J.; Janek, J. | ||||
| Title | Facile dry coating method of high-nickel cathode material by nanostructured fumed alumina (Al2O3) improving the performance of lithium-ion batteries | Type | A1 Journal article | ||
| Year | 2021 | Publication | Energy technology | Abbreviated Journal | |
| Volume | 9 | Issue | 4 | Pages | 2100028 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Surface coating is a crucial method to mitigate the aging problem of high-Ni cathode active materials (CAMs). By avoiding the direct contact of the CAM and the electrolyte, side reactions are hindered. Commonly used techniques like wet or ALD coating are time consuming and costly. Therefore, a more cost-effective coating technique is desirable. Herein, a facile and fast dry powder coating process for CAMs with nanostructured fumed metal oxides are reported. As the model case, the coating of high-Ni NMC (LiNi0.7Mn0.15Co0.15O2) by nanostructured fumed Al2O3 is investigated. A high coverage of the CAM surface with an almost continuous coating layer is achieved, still showing some porosity. Electrochemical evaluation shows a significant increase in capacity retention, cycle life and rate performance of the coated NMC material. The coating layer protects the surface of the CAM successfully and prevents side reactions, resulting in reduced solid electrolyte interface (SEI) formation and charge transfer impedance during cycling. A mechanism on how the coating layer enhances the cycling performance is hypothesized. The stable coating layer effectively prevents crack formation and particle disintegration of the NMC. In depth analysis indicates partial formation of LixAl2O3/LiAlO2 in the coating layer during cycling, enhancing lithium ion diffusivity and thus, also the rate performance. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000621000700001 | Publication Date | 2021-01-23 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2194-4296; 2194-4288 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | 25 | Open Access | OpenAccess | |
| Notes | The authors would like to thank Erik Peldszus and Steve Rienecker for the support with scanning electron microscopy and X-ray photoelectron spectroscopy analysis. The Qu-Ant-EM microscope and the direct electron detector were partly funded by the Hercules fund from the Flemish Government. N.G. and J.V. acknowledge funding from GOA project “Solarpaint” of the University of Antwerp. Funding from the Flemish Research Fund (FWO) project G0F1320N is acknowledged.; Open access funding enabled and organized by Projekt DEAL. | Approved | Most recent IF: NA | ||
| Call Number | UA @ admin @ c:irua:176670 | Serial | 6724 | ||
| Permanent link to this record | |||||
| Author | Li, C.-F.; Zhao, K.; Liao, X.; Hu, Z.-Y.; Zhang, L.; Zhao, Y.; Mu, S.; Li, Y.; Li, Y.; Van Tendeloo, G.; Sun, C. | ||||
| Title | Interface cation migration kinetics induced oxygen release heterogeneity in layered lithium cathodes | Type | A1 Journal article | ||
| Year | 2021 | Publication | Energy Storage Materials | Abbreviated Journal | |
| Volume | 36 | Issue | Pages | 115-122 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The irreversible release of the lattice oxygen in layered cathodes is one of the major degradation mechanisms of lithium ion batteries, which accounts for a number of battery failures including the voltage/capacity fade, loss of cation ions and detachment of the primary particles, etc. Oxygen release is generally attributed to the stepwise thermodynamic controlled phase transitions from the layered to spinel and rock salt phases. Here, we report a strong kinetic effect from the mobility of cation ions, whose migration barrier can be significantly modulated by the phase epitaxy at the degrading interface. It ends up with a clear oxygen release heterogeneity and completely different reaction pathways between the thin and thick areas, as well as the interparticle valence boundaries, both of which widely exist in the mainstream cathode design with the secondary agglomerates. This work unveils the origin of the heterogenous oxygen release in the layered cathodes. It also sheds light on the rational design of cathode materials with enhanced oxygen stability by suppressing the cation migration. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000620584300009 | Publication Date | 2020-12-24 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | ||
| Impact Factor | Times cited | Open Access | OpenAccess | ||
| Notes | Approved | Most recent IF: NA | |||
| Call Number | UA @ admin @ c:irua:176654 | Serial | 6730 | ||
| Permanent link to this record | |||||
| Author | Van Alphen, S.; Jardali, F.; Creel, J.; Trenchev, G.; Snyders, R.; Bogaerts, A. | ||||
| Title | Sustainable gas conversion by gliding arc plasmas: a new modelling approach for reactor design improvement | Type | A1 Journal article | ||
| Year | 2021 | Publication | Sustainable energy & fuels | Abbreviated Journal | Sustainable Energy Fuels |
| Volume | 5 | Issue | 6 | Pages | 1786-1800 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Research in plasma reactor designs is developing rapidly as plasma technology is gaining increasing interest for sustainable gas conversion applications, like the conversion of greenhouse gases into value-added chemicals and renewable fuels, and fixation of N<sub>2</sub>from air into precursors of mineral fertilizer. As plasma is generated by electric power and can easily be switched on/off, these applications allows for efficient conversion and energy storage of intermittent renewable electricity. In this paper, we present a new comprehensive modelling approach for the design and development of gliding arc plasma reactors, which reveals the fluid dynamics, the arc behaviour and the plasma chemistry by solving a unique combination of five complementary models. This results in a complete description of the plasma process, which allows one to efficiently evaluate the performance of a reactor and indicate possible design improvements before actually building it. We demonstrate the capabilities of this method for an experimentally validated study of plasma-based NO<sub>x</sub>formation in a rotating gliding arc reactor, which is gaining increasing interest as a flexible, electricity-driven alternative for the Haber–Bosch process. The model demonstrates the importance of the vortex flow and the presence of a recirculation zone in the reactor, as well as the formation of hot spots in the plasma near the cathode pin and the anode wall that are responsible for most of the NO<sub>x</sub>formation. The model also reveals the underlying plasma chemistry and the vibrational non-equilibrium that exists due to the fast cooling during each arc rotation. Good agreement with experimental measurements on the studied reactor design proves the predictive capabilities of our modelling approach. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000631643300013 | Publication Date | 2021-02-22 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2398-4902 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | OpenAccess | ||
| Notes | Fonds Wetenschappelijk Onderzoek, GoF9618n ; Vlaamse regering, HBC.2019.0107 ; European Research Council, 810182 ; This research was supported by the Excellence of Science FWOFNRS project (FWO grant ID GoF9618n, EOS ID 30505023), the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement no. 810182 – SCOPE ERC Synergy project), the 1798 | Sustainable Energy Fuels, 2021, 5, 1786–1800 | Approved | Most recent IF: NA | ||
| Call Number | PLASMANT @ plasmant @c:irua:177540 | Serial | 6745 | ||
| Permanent link to this record | |||||
| Author | Rouwenhorst, K.H.R.; Jardali, F.; Bogaerts, A.; Lefferts, L. | ||||
| Title | From the Birkeland–Eyde process towards energy-efficient plasma-based NOXsynthesis: a techno-economic analysis | Type | A1 Journal article | ||
| Year | 2021 | Publication | Energy & Environmental Science | Abbreviated Journal | Energ Environ Sci |
| Volume | 14 | Issue | 5 | Pages | 2520-2534 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Plasma-based NO<sub>X</sub>synthesis<italic>via</italic>the Birkeland–Eyde process was one of the first industrial nitrogen fixation methods. However, this technology never played a dominant role for nitrogen fixation, due to the invention of the Haber–Bosch process. Recently, nitrogen fixation by plasma technology has gained significant interest again, due to the emergence of low cost, renewable electricity. We first present a short historical background of plasma-based NO<sub>X</sub>synthesis. Thereafter, we discuss the reported performance for plasma-based NO<sub>X</sub>synthesis in various types of plasma reactors, along with the current understanding regarding the reaction mechanisms in the plasma phase, as well as on a catalytic surface. Finally, we benchmark the plasma-based NO<sub>X</sub>synthesis process with the electrolysis-based Haber–Bosch process combined with the Ostwald process, in terms of the investment cost and energy consumption. This analysis shows that the energy consumption for NO<sub>X</sub>synthesis with plasma technology is almost competitive with the commercial process with its current best value of 2.4 MJ mol N<sup>−1</sup>, which is required to decrease further to about 0.7 MJ mol N<sup>−1</sup>in order to become fully competitive. This may be accomplished through further plasma reactor optimization and effective plasma–catalyst coupling. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000639255800001 | Publication Date | 2021-03-31 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1754-5692 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 29.518 | Times cited | Open Access | OpenAccess | |
| Notes | H2020 European Research Council; Horizon 2020, 810182 ; Ministerie van Economische Zaken en Klimaat; This research was supported by the TKI-Energie from Toeslag voor Topconsortia voor Kennis en Innovatie (TKI) from the Ministry of Economic Affairs and Climate Policy, the Excellence of Science FWO-FNRS project (FWO grant ID GoF9618n, EOS ID 30505023), and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No 810182 – SCOPE ERC Synergy project). | Approved | Most recent IF: 29.518 | ||
| Call Number | PLASMANT @ plasmant @c:irua:178173 | Serial | 6763 | ||
| Permanent link to this record | |||||
| Author | Herzog, M.J.; Gauquelin, N.; Esken, D.; Verbeeck, J.; Janek, J. | ||||
| Title | Increased Performance Improvement of Lithium-Ion Batteries by Dry Powder Coating of High-Nickel NMC with Nanostructured Fumed Ternary Lithium Metal Oxides | Type | A1 Journal article | ||
| Year | 2021 | Publication | ACS applied energy materials | Abbreviated Journal | ACS Appl. Energy Mater. |
| Volume | 4 | Issue | 9 | Pages | 8832-8848 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Dry powder coating is an effective approach to protect the surfaces of layered cathode active materials (CAMs) in lithium-ion batteries. Previous investigations indicate an incorporation of lithium ions in fumed Al2O3, ZrO2, and TiO2 coatings on LiNi0.7Mn0.15Co0.15O2 during cycling, improving the cycling performance. Here, this coating approach is transferred for the first time to fumed ternary LiAlO2, Li4Zr3O8, and Li4Ti5O12 and directly compared with their lithium-free equivalents. All materials could be processed equally and their nanostructured small aggregates accumulate on the CAM surfaces to quite homogeneous coating layers with a certain porosity. The LiNixMnyCozO2 (NMC) coated with lithium-containing materials shows an enhanced improvement in overall capacity, capacity retention, rate performance, and polarization behavior during cycling, compared to their lithium-free analogues. The highest rate performance was achieved with the fumed ZrO2 coating, while the best long-term cycling stability with the highest absolute capacity was obtained for the fumed LiAlO2-coated NMC. The optimal coating agent for NMC to achieve a balanced system is fumed Li4Ti5O12, providing a good compromise between high rate capability and good capacity retention. The coating agents prevent CAM particle cracking and degradation in the order LiAlO2 ≈ Al2O3 > Li4Ti5O12 > Li4Zr3O8 > ZrO2 > TiO2. A schematic model for the protection and electrochemical performance enhancement of high-nickel NMC with fumed metal oxide coatings is sketched. It becomes apparent that physical and chemical characteristics of the coating significantly influence the performance of NMC. A high degree of coating-layer porosity is favorable for the rate capability, while a high coverage of the surface, especially in vulnerable grain boundaries, enhances the long-term cycling stability and improves the cracking behavior of NMCs. While zirconium-containing coatings possess the best chemical properties for high rate performances, aluminum-containing coatings feature a superior chemical nature to protect high-nickel NMCs. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000703338600018 | Publication Date | 2021-09-27 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2574-0962 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | 15 | Open Access | OpenAccess | |
| Notes | For his support in scanning electron microscopy analysis, the authors thank Erik Peldszus. N. G. and J. V. acknowledge funding from GOA project “Solarpaint” of the University of Antwerp and from the Flemish Research Fund (FWO) project G0F1320N. The Qu-Ant-EM microscope and the direct electron detector were partly funded by the Hercules fund from the Flemish Government | Approved | Most recent IF: NA | ||
| Call Number | EMAT @ emat @c:irua:183949 | Serial | 6823 | ||
| Permanent link to this record | |||||
| Author | Abakumov, A.M.; Li, C.; Boev, A.; Aksyonov, D.A.; Savina, A.A.; Abakumova, T.A.; Van Tendeloo, G.; Bals, S. | ||||
| Title | Grain boundaries as a diffusion-limiting factor in lithium-rich NMC cathodes for high-energy lithium-ion batteries | Type | A1 Journal article | ||
| Year | 2021 | Publication | ACS applied energy materials | Abbreviated Journal | |
| Volume | 4 | Issue | 7 | Pages | 6777-6786 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | High-energy lithium-rich layered transition metal oxides are capable of delivering record electrochemical capacity and energy density as positive electrodes for Li-ion batteries. Their electrochemical behavior is extremely complex due to sophisticated interplay between crystal structure, electronic structure, and defect structure. Here we unravel an extra level of this complexity by revealing that the most typical representative Li1.2Ni0.13Mn0.54Co0.13O2 material, prepared by a conventional coprecipitation technique with Na2CO3 as a precipitating agent, contains abundant coherent (001) grain boundaries with a Na-enriched P2-structured block due to segregation of the residual sodium traces. The trigonal prismatic oxygen coordination of Na triggers multiple nanoscale twinning, giving rise to incoherent (104) boundaries. The cationic layers at the (001) grain boundaries are filled with transition metal cations being Mn-depleted and Co-enriched; this makes them virtually not permeable for the Li+ cations, and therefore they negatively influence the Li diffusion in and out of the spherical agglomerates. These results demonstrate that besides the mechanisms intrinsic to the crystal and electronic structure of Li-rich cathodes, their rate capability might also be depreciated by peculiar microstructural aspects. Dedicated engineering of grain boundaries opens a way for improving inherently sluggish kinetics of these materials. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000678382900042 | Publication Date | 2021-07-02 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2574-0962 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | 4 | Open Access | OpenAccess | |
| Notes | We thank Dr. M. V. Berekchiian (MSU) for assisting in ICPMS measurements. We acknowledge Russian Science Foundation (Grant 20-43-01012) and Research Foundation Flanders (FWO Vlaanderen, Project No. G0F1320N) for financial support. | Approved | Most recent IF: NA | ||
| Call Number | UA @ admin @ c:irua:180556 | Serial | 6841 | ||
| Permanent link to this record | |||||
| Author | Biswas, A.N.; Winter, L.R.; Loenders, B.; Xie, Z.; Bogaerts, A.; Chen, J.G. | ||||
| Title | Oxygenate Production from Plasma-Activated Reaction of CO2and Ethane | Type | A1 Journal article | ||
| Year | 2021 | Publication | Acs Energy Letters | Abbreviated Journal | Acs Energy Lett |
| Volume | Issue | Pages | 236-241 | ||
| Keywords | A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Upgrading ethane with CO2 as a soft oxidant represents a desirable means of obtaining oxygenated hydrocarbons. This reaction is not thermodynamically feasible under mild conditions and has not been previously achieved as a one-step process. Nonthermal plasma was implemented as an alternative means of supplying energy to overcome activation barriers, leading to the production of alcohols, aldehydes, and acids as well as C1−C5+ hydrocarbons under ambient pressure, with a maximum total oxygenate selectivity of 12%. A plasma chemical kinetic computational model was developed and found to be in good agreement with the experimental trends. Results from this study illustrate the potential to use plasma for the direct synthesis of value-added alcohols, acids, and aldehydes from ethane and CO2 under mild conditions. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000732435700001 | Publication Date | 2021-12-14 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2380-8195 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | OpenAccess | ||
| Notes | Basic Energy Sciences, DE-SC0012704 ; Fonds Wetenschappelijk Onderzoek, S001619N ; H2020 European Research Council, 810182 ; National Science Foundation, DGE 16-44869 ; This research was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Catalysis Science Program (grant no. DE-SC0012704). L.R.W. acknowledges the U.S. National Science Foundation Graduate Research Fellowship Program grant number DGE 16-44869. B.L. and A.B. acknowledge support from the FWO-SBO project PLASMA240 | Approved | Most recent IF: NA | ||
| Call Number | PLASMANT @ plasmant @c:irua:184812 | Serial | 6897 | ||
| Permanent link to this record | |||||
| Author | Zheng, Y.-R.; Vernieres, J.; Wang, Z.; Zhang, K.; Hochfilzer, D.; Krempl, K.; Liao, T.-W.; Presel, F.; Altantzis, T.; Fatermans, J.; Scott, S.B.; Secher, N.M.; Moon, C.; Liu, P.; Bals, S.; Van Aert, S.; Cao, A.; Anand, M.; Nørskov, J.K.; Kibsgaard, J.; Chorkendorff, I. | ||||
| Title | Monitoring oxygen production on mass-selected iridium–tantalum oxide electrocatalysts | Type | A1 Journal article | ||
| Year | 2021 | Publication | Nature Energy | Abbreviated Journal | Nat Energy |
| Volume | Issue | Pages | |||
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Applied Electrochemistry & Catalysis (ELCAT) | ||||
| Abstract | Development of low-cost and high-performance oxygen evolution reaction catalysts is key to implementing polymer electrolyte membrane water electrolyzers for hydrogen production. Iridium-based oxides are the state-of-the-art acidic oxygen evolution reactio catalysts but still suffer from inadequate activity and stability, and iridium's scarcity motivates the discovery of catalysts with lower iridium loadings. Here we report a mass-selected iridium-tantalum oxide catalyst prepared by a magnetron-based cluster source with considerably reduced noble-metal loadings beyond a commercial IrO2 catalyst. A sensitive electrochemistry/mass-spectrometry instrument coupled with isotope labelling was employed to investigate the oxygen production rate under dynamic operating conditions to account for the occurrence of side reactions and quantify the number of surface active sites. Iridium-tantalum oxide nanoparticles smaller than 2 nm exhibit a mass activity of 1.2 ± 0.5 kA “g” _“Ir” ^“-1” and a turnover frequency of 2.3 ± 0.9 s-1 at 320 mV overpotential, which are two and four times higher than those of mass-selected IrO2, respectively. Density functional theory calculations reveal that special iridium coordinations and the lowered aqueous decomposition free energy might be responsible for the enhanced performance. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000728458000001 | Publication Date | 2021-12-09 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2058-7546 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | 95 | Open Access | OpenAccess | |
| Notes | Y.-R.Z. and Z.W acknowledge funding from the Toyota Research Institute. This project has received funding from VILLUM FONDEN (grant no. 9455) and the European Research Council under the European Union’s Horizon 2020 research and innovation programme (grants no. 741860-CLUNATRA, no. 815128−REALNANO and no. 770887−PICOMETRICS). S.B. and S.V.A. acknowledge funding from the Research Foundation Flanders (FWO, G026718N and G050218N). T.A. acknowledges the University of Antwerp Research Fund (BOF). STEM measurements were supported by the European Union's Horizon 2020 Research Infrastructure-Integrating Activities for Advanced Communities under grant agreement No 823717 – ESTEEM3.; sygmaSB | Approved | Most recent IF: NA | ||
| Call Number | EMAT @ emat @c:irua:184794 | Serial | 6903 | ||
| Permanent link to this record | |||||
| Author | Saviuc, I.; Milis, K.; Peremans, H.; Van Passel, S. | ||||
| Title | A cross-European analysis of the impact of electricity pricing on battery uptake in residential microgrids with photovoltaic units | Type | A1 Journal article | ||
| Year | 2021 | Publication | Journal of Sustainable Development of Energy, Water and Environment Systems | Abbreviated Journal | |
| Volume | 9 | Issue | 3 | Pages | 1080368 |
| Keywords | A1 Journal article; Engineering Management (ENM) | ||||
| Abstract | As decentralized electricity generation is supporting grid development into the prosumer era, this paper investigates the economic viability of adding batteries to residential microgrids powered by photovoltaic units, under various electricity pricing schemes. Batteries bring the benefits of grid-stabilization and congestion relief, and they are also becoming cheaper. The problem identified is that the main grid effectively acts as a lossless storage system, especially under the net-metering scheme, whereas using a battery involves investment costs and energy losses. This mismatch is addressed by analysing residential microgrid projects under seven tariff designs, each in seven countries of the European Union, and compare the economic viability of photovoltaic systems with and without batteries. The findings show that the conditions most favourable to batteries are given by a capacity tariff scheme allowing price arbitrage. Based on these findings, the paper discusses possibilities for further support in order to bring the economic viability of microgrids with batteries on par with that of microgrids without batteries. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000669453200005 | Publication Date | 2020-10-14 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1848-9257 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | OpenAccess | ||
| Notes | Approved | Most recent IF: NA | |||
| Call Number | UA @ admin @ c:irua:179767 | Serial | 6910 | ||
| Permanent link to this record | |||||
| Author | Srivastava, A.; Van Passel, S.; Valkering, P.; Laes, E.J.W. | ||||
| Title | Power outages and bill savings : a choice experiment on residential demand response acceptability in Delhi | Type | A1 Journal article | ||
| Year | 2021 | Publication | Renewable & Sustainable Energy Reviews | Abbreviated Journal | Renew Sust Energ Rev |
| Volume | 143 | Issue | Pages | 110904 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM) | ||||
| Abstract | This paper conducts a discrete choice experiment among 167 households in the Delhi region in India, to study the acceptability of demand response (DR) programs among upper-income households. Attributes include rate types, rate bands, reductions in power outages, and expected monthly savings. Results indicate a preference for time-of-use pricing over real-time pricing, and a preference for three rate slabs per day over two. Respondents prioritize reductions in power outages and minimizing potential expenses, reflecting the financial sensitivity and energy poverty relative to other countries. Respondents' ages and incomes further affect the value that they attach to reductions in power outages. The paper proposes various structures of DR programs that could achieve high predicted enrollment and concludes by estimating the potential benefits of implementing such programs. Overall, the analysis indicates that a DR program could be feasible in a developing country context, particularly if it is designed keeping in mind local socio-economic considerations. This may be supported through further confirmatory research. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000637710200016 | Publication Date | 2021-03-08 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1364-0321; 1879-0690 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 8.05 | Times cited | Open Access | OpenAccess | |
| Notes | Approved | Most recent IF: 8.05 | |||
| Call Number | UA @ admin @ c:irua:178188 | Serial | 6938 | ||
| Permanent link to this record | |||||
| Author | Nabavi-Pelesaraei, A.; Azadi, H.; Van Passel, S.; Saber, Z.; Hosseini-Fashami, F.; Mostashari-Rad, F.; Ghasemi-Mobtaker, H. | ||||
| Title | Prospects of solar systems in production chain of sunflower oil using cold press method with concentrating energy and life cycle assessment | Type | A1 Journal article | ||
| Year | 2021 | Publication | Energy | Abbreviated Journal | Energy |
| Volume | 223 | Issue | Pages | 120117 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM) | ||||
| Abstract | The aim of this study is determination of exergoenvironmental efficiency for using solar technologies in sunflower oil production in Iran. Accordingly, the applications of photovoltaic and photovoltaic/thermal systems were evaluated for both agricultural and industrial phases of sunflower oil production. Energy results reveal that 1 ton of sunflower oil consumes and produces about 180,354 and 39,400 MJ energy, respectively. About 86% of total energy consumption belongs to agricultural phase and electricity with 32%, has the highest share of total energy consumption. IMPACT 2002+ method and cumulative energy demand of life cycle assessment are applied to 3 defined scenarios including Present, photovoltaic and photovoltaic/thermal. Results indicate that total amounts of climate change in Present scenarios is 24537.53 kg CO2 eq.. The highest share of human health (90%), ecosystem quality (90%) and climate change (50%) in all scenarios belongs to direct emissions. Results also illustrates that total cumulative energy demand of Present, photovoltaic and photovoltaic/thermal scenarios are about 177,538, 99,054 and 132,158 MJ 1TSO(-1), respectively. Furthermore, the most contribution of non-renewable resources and fossil fuels belongs to electricity (37%), nitrogen (52%) and photovoltaic/thermal panels (39%) in Present, photovoltaic and photovoltaic/thermal scenarios, respectively. Finally the photovoltaic scenario is the best environmental-friendly scenario. (c) 2021 Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000637964000003 | Publication Date | 2021-02-17 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0360-5442 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.52 | Times cited | Open Access | OpenAccess | |
| Notes | Approved | Most recent IF: 4.52 | |||
| Call Number | UA @ admin @ c:irua:178193 | Serial | 6940 | ||
| Permanent link to this record | |||||
| Author | Vishwakarma, M.; Batra, Y.; Hadermann, J.; Singh, A.; Ghosh, A.; Mehta, B.R. | ||||
| Title | Exploring the role of graphene oxide as a co-catalyst in the CZTS photocathodes for improved photoelectrochemical properties | Type | A1 Journal article | ||
| Year | 2022 | Publication | ACS applied energy materials | Abbreviated Journal | |
| Volume | 5 | Issue | 6 | Pages | 7538-7549 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The hydrogen evolution properties of CZTS heterostructure photocathodes are reported with graphene oxide (GO) as a co-catalyst layer coated by a drop-cast method and an Al2O3 protection layer fabricated using atomic layer deposition. In the CZTS absorber, a minor deviation from stoichiometry across the cross section of the thin film results in nanoscale growth of spurious phases, but the kesterite phase remains the dominant phase. We have investigated the band alignment parameters such as the band gap, work function, and Fermi level position that are crucial for making kesterite-based heterostructure devices. The photocurrent density in the photocathode CZTS/CdS/ZnO is found to be improved to -4.71 mAmiddotcm(-2) at -0.40 V-RHE, which is 3 times that of the pure CZTS. This enhanced photoresponse can be attributed to faster carrier separation at p-n junction regions driven by upward band bending at CZTS grain boundaries and the ZnO layer. GO as a co-catalyst over the heterostructure photocathode significantly improves the photocurrent density to -6.14 mAmiddotcm(-2) at -0.40 V-RHE by effective charge migration in the CZTS/CdS/ZnO/GO configuration, but the onset potential shifts only after application of the Al2O3 protection layer. Significant photocurrents of -29 mAmiddotcm(-2) at -0.40 V-RHE and -8 mAmiddotcm(-2) at 0 V-RHE are observed, with an onset potential of 0.7 V-RHE in CZTS/CdS/ZnO/GO/Al2O3. The heterostructure configuration and the GO co-catalyst reduce the charge-transfer resistance, while the Al2O3 top layer provides a stable photocurrent for a prolonged time (similar to 16 h). The GO co-catalyst increases the flat band potential from 0.26 to 0.46 V-RHE in CZTS/CdS/ZnO/GO, which supports the bias-induced band bending at the electrolyte-electrode interface. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000820418400001 | Publication Date | 2022-05-24 | |
| Series Editor | Series Title |
Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2574-0962 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 6.4 | Times cited | Open Access | Not_Open_Access | |
| Notes | Approved | Most recent IF: 6.4 | |||
| Call Number | UA @ admin @ c:irua:189666 | Serial | 7082 | ||
| Permanent link to this record | |||||