Records |
Author |
Goffin, A.-L.; Duquesne, E.; Raquez, J.-M.; Miltner, H.E.; Ke, X.; Alexandre, M.; Van Tendeloo, G.; van Mele, B.; Dubois, P. |
Title |
From polyester grafting onto POSS nanocage by ring-opening polymerization to high performance polyester/POSS nanocomposites |
Type |
A1 Journal article |
Year |
2010 |
Publication |
Journal of materials chemistry |
Abbreviated Journal |
J Mater Chem |
Volume |
20 |
Issue |
42 |
Pages |
9415-9422 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Polyester-grafted polyhedral oligomeric silsesquioxane (POSS) nanohybrids selectively produced by ring-opening polymerization of ε-caprolactone and L,L-lactide (A.-L. Goffin, E. Duquesne, S. Moins, M. Alexandre, Ph. Dubois, Eur. Polym. Journal, 2007, 43, 4103) were studied as masterbatches by melt-blending within their corresponding commercial polymeric matrices, i.e., poly(ε-caprolactone) (PCL) and poly(L,L-lactide) (PLA). For the sake of comparison, neat POSS nanoparticles were also dispersed in PCL and PLA. The objective was to prepare aliphatic polyester-based nanocomposites with enhanced crystallization behavior, and therefore, enhanced thermo-mechanical properties. Wide-angle X-ray scattering and transmission electron microscopy attested for the dispersion of individualized POSS nanoparticles in the resulting nanocomposite materials only when the polyester-grafted POSS nanohybrid was used as a masterbatch. The large impact of such finely dispersed (grafted) nanoparticles on the crystallization behavior for the corresponding polyester matrices was noticed, as evidenced by differential scanning calorimetry analysis. Indeed, well-dispersed POSS nanoparticles acted as efficient nucleating sites, significantly increasing the crystallinity degree of both PCL and PLA matrices. As a result, a positive impact on thermo-mechanical properties was highlighted by dynamic mechanical thermal analysis. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Cambridge |
Editor |
|
Language |
|
Wos |
000283264500017 |
Publication Date |
2010-06-03 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0959-9428;1364-5501; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
42 |
Open Access |
|
Notes |
Fwo; Iap-6 |
Approved |
Most recent IF: NA |
Call Number |
UA @ lucian @ c:irua:85784 |
Serial ![sorted by Serial field, descending order (down)](img/sort_desc.gif) |
1284 |
Permanent link to this record |
|
|
|
Author |
Schulze, A.; Hantschel, T.; Dathe, A.; Eyben, P.; Ke, X.; Vandervorst, W. |
Title |
Electrical tomography using atomic force microscopy and its application towards carbon nanotube-based interconnects |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Nanotechnology |
Abbreviated Journal |
Nanotechnology |
Volume |
23 |
Issue |
30 |
Pages |
305707 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
The fabrication and integration of low-resistance carbon nanotubes (CNTs) for interconnects in future integrated circuits requires characterization techniques providing structural and electrical information at the nanometer scale. In this paper we present a slice-and-view approach based on electrical atomic force microscopy. Material removal achieved by successive scanning using doped ultra-sharp full-diamond probes, manufactured in-house, enables us to acquire two-dimensional (2D) resistance maps originating from different depths (equivalently different CNT lengths) on CNT-based interconnects. Stacking and interpolating these 2D resistance maps results in a three-dimensional (3D) representation (tomogram). This allows insight from a structural (e.g. size, density, distribution, straightness) and electrical point of view simultaneously. By extracting the resistance evolution over the length of an individual CNT we derive quantitative information about the resistivity and the contact resistance between the CNT and bottom electrode. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Bristol |
Editor |
|
Language |
|
Wos |
000306333500029 |
Publication Date |
2012-07-11 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0957-4484;1361-6528; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.44 |
Times cited |
29 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.44; 2012 IF: 3.842 |
Call Number |
UA @ lucian @ c:irua:100750 |
Serial ![sorted by Serial field, descending order (down)](img/sort_desc.gif) |
895 |
Permanent link to this record |
|
|
|
Author |
Ke, X.; Turner, S.; Quintana, M.; Hadad, C.; Montellano-López, A.; Carraro, M.; Sartorel, A.; Bonchio, M.; Prato, M.; Bittencourt, C.; Van Tendeloo, G.; |
Title |
Dynamic motion of Ru-polyoxometalate ions (POMs) on functionalized few-layer graphene |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Small |
Abbreviated Journal |
Small |
Volume |
9 |
Issue |
23 |
Pages |
3922-3927 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
The interaction and stability of Ru4POM on few layer graphene via functional groups is investigated by time-dependent imaging using aberration-corrected transmission electron microscopy. The Ru4POM demonstrates dynamic motion on the graphene surface with its frequency and amplitude of rotation related to the nature of the functional group used. The stability of the Ru4POMgraphene hybrid corroborates its long-term robustness when applied to multielectronic catalytic processes. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
Language |
|
Wos |
000331282400003 |
Publication Date |
2013-07-01 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1613-6810; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
8.643 |
Times cited |
16 |
Open Access |
|
Notes |
IAP-7; Countatoms; |
Approved |
Most recent IF: 8.643; 2013 IF: 7.514 |
Call Number |
UA @ lucian @ c:irua:115768 |
Serial ![sorted by Serial field, descending order (down)](img/sort_desc.gif) |
763 |
Permanent link to this record |
|
|
|
Author |
He, Z.; Ke, X.; Bals, S.; Van Tendeloo, G. |
Title |
Direct evidence for the existence of multi-walled carbon nanotubes with hexagonal cross-sections |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
Volume |
50 |
Issue |
7 |
Pages |
2524-2529 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Carbon nanotubes (CNTs) with a polygonal cross-section have been paid increasing attention since their three-dimensional structure is related to specific physical properties, which are found to be different in comparison to CNTs with a circular cross-section. Here, we report the existence of novel multi-walled CNTs yielding walls with a rounded-hexagonal configuration. This structure was directly confirmed for the first time by both cross-sectional transmission electron microscopy and electron tomography. The morphology of the Fe catalytic particle also exhibits hexagonal characteristics, and is proposed as the origin of the formation of the rounded-hexagonal walls of the CNT. This observation is of great importance with respect to the design of polygonal (such as pentagonal or hexagonal) cross-sectional CNTs. By controlling the morphology of the catalytic nanoparticles it will be possible to grow CNTs with desired electronic and mechanical properties. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000303038400015 |
Publication Date |
2012-02-06 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
6.337 |
Times cited |
8 |
Open Access |
|
Notes |
Fwo |
Approved |
Most recent IF: 6.337; 2012 IF: 5.868 |
Call Number |
UA @ lucian @ c:irua:96956 |
Serial ![sorted by Serial field, descending order (down)](img/sort_desc.gif) |
711 |
Permanent link to this record |
|
|
|
Author |
Bertoni, G.; Grillo, V.; Brescia, R.; Ke, X.; Bals, S.; Catellani, A.; Li, H.; Manna, L. |
Title |
Direct determination of polarity, faceting, and core location in colloidal core/shell wurtzite semiconductor nanocrystals |
Type |
A1 Journal article |
Year |
2012 |
Publication |
ACS nano |
Abbreviated Journal |
Acs Nano |
Volume |
6 |
Issue |
7 |
Pages |
6453-6461 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
The ability to determine the atomic arrangement and termination of various facets of surfactant-coated nanocrystals is of great importance for understanding their growth mechanism and their surface properties and represents a critical piece of information that can be coupled to other experimental techniques and to calculations. This is especially appealing in the study of nanocrystals that can be grown in strongly anisotropic shapes, for which the relative growth rates of various facets can be influenced under varying reaction conditions. Here we show that in two representative cases of rod-shaped nanocrystals in the wurtzite phase (CdSe(core)/CdS(shell) and ZnSe(core)/ZnS(shell) nanorods) the terminations of the polar facets can be resolved unambiguously by combining advanced electron microscopy techniques, such as aberration-corrected HRTEM with exit wave reconstruction or aberration-corrected HAADF-STEM. The [0001] and [000-1] polar directions of these rods, which grow preferentially along their c-axis, are revealed clearly, with one side consisting of the Cd (or Zn)-terminated (0001) facet and the other side with a pronounced faceting due to Cd (or Zn)-terminated {10-1-1} facets. The lateral faceting of the rods is instead dominated by three nonpolar {10-10} facets. The core buried in the nanostructure can be localized in both the exit wave phase and HAADF-STEM images. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000306673800079 |
Publication Date |
2012-06-18 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1936-0851;1936-086X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
13.942 |
Times cited |
63 |
Open Access |
|
Notes |
The authors gratefully acknowledge funding from the European Research Council under grant number 240111 (NANO-ARCH) and the financial support from the Flemish Hercules 3 Programme for large infrastructures. G.B. and V.G. thank E. Rotunno for his help with STEM_CELL and IWFR. |
Approved |
Most recent IF: 13.942; 2012 IF: 12.062 |
Call Number |
UA @ lucian @ c:irua:101138 |
Serial ![sorted by Serial field, descending order (down)](img/sort_desc.gif) |
710 |
Permanent link to this record |
|
|
|
Author |
Ribbens, S.; Meynen, V.; Van Tendeloo, G.; Ke, X.; Mertens, M.; Maes, B.U.W.; Cool, P.; Vansant, E.F. |
Title |
Development of photocatalytic efficient Ti-based nanotubes and nanoribbons by conventional and microwave assisted synthesis strategies |
Type |
A1 Journal article |
Year |
2008 |
Publication |
Microporous and mesoporous materials: zeolites, clays, carbons and related materials |
Abbreviated Journal |
Micropor Mesopor Mat |
Volume |
114 |
Issue |
1/3 |
Pages |
401-409 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA); Organic synthesis (ORSY) |
Abstract |
Titanate nanotubes were prepared via a hydrothermal treatment of TiO2 powders (Riedel De Haen) in a basic solution. Morphology and structure of the prepared samples were characterized by high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), XRD, FT-Raman spectroscopy, nitrogen sorption and DSC. The photocatalytic activity was evaluated by photocatalytic oxidation of rhodamine 6G. Trititanate nanotubes (TTNT) with inner pore diameters between 4 and 4.2 nm and surface areas up till 360 m(2)/g could be synthesized. The synthesis route was modified by introduction of a calcination step, by applying a lower hydrothermal temperature and microwave irradiation in order to increase the photocatalytic activity of the porous photoactive nanotubular materials. Calcination and a softer hydrothermal treatment led to the formation of anatase without affecting the surface area and nanotubular shape of the samples. In this way, the photocatalytic activity of the original trititanate nanotubes could be significantly increased. By making use of microwave assisted synthesis, the photocatalytic activity call also be increased due to the presence of anatase. However, by applying microwave synthesis, a different structure was obtained, nanoribbons (NR) instead of nanotubcs, resulting in a decrease in surface area and porosity. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
Language |
|
Wos |
000258432100040 |
Publication Date |
2008-02-01 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1387-1811; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.615 |
Times cited |
47 |
Open Access |
|
Notes |
Fwo; Crp (Ua) |
Approved |
Most recent IF: 3.615; 2008 IF: 2.555 |
Call Number |
UA @ lucian @ c:irua:69696 |
Serial ![sorted by Serial field, descending order (down)](img/sort_desc.gif) |
683 |
Permanent link to this record |
|
|
|
Author |
Corthals, S.; van Noyen, J.; Liang, D.; Ke, X.; Van Tendeloo, G.; Jacobs, P.; Sels, B. |
Title |
A cyclic catalyst pretreatment in CO2 for high yield production of Carbon nanofibers with narrow diameter distribution |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Catalysis letters |
Abbreviated Journal |
Catal Lett |
Volume |
141 |
Issue |
11 |
Pages |
1621-1624 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
This paper presents a cyclic catalyst pretreatment process to improve the CNF yield with narrow size distribution by sequentially feeding the CVD reactor with CH4/CO2 mixtures (carbon deposition) and CO2 (carbon removal) prior to the actual growth process. A mechanism based on a break-up of large Ni particles tentatively explains the beneficial effect of the cyclic carbon deposition/removal CVD procedure. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Basel |
Editor |
|
Language |
|
Wos |
000296471400006 |
Publication Date |
2011-09-26 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1011-372X;1572-879X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.799 |
Times cited |
1 |
Open Access |
|
Notes |
Iwt; Iap |
Approved |
Most recent IF: 2.799; 2011 IF: 2.242 |
Call Number |
UA @ lucian @ c:irua:91888 |
Serial ![sorted by Serial field, descending order (down)](img/sort_desc.gif) |
598 |
Permanent link to this record |
|
|
|
Author |
Llobet, E.; Espinosa, E.H.; Sotter, E.; Ionescu, R.; Vilanova, X.; Torres, J.; Felten, A.; Pireaux, J.J.; Ke, X.; Van Tendeloo, G.; Renaux, F.; Paint, Y.; Hecq, M.; Bittencourt, C.; |
Title |
Carbon nanotube TiO2 hybrid films for detecting traces of O2 |
Type |
A1 Journal article |
Year |
2008 |
Publication |
Nanotechnology |
Abbreviated Journal |
Nanotechnology |
Volume |
19 |
Issue |
37 |
Pages |
375501-375511 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
Hybrid titania films have been prepared using an adapted sol-gel method for obtaining well-dispersed hydrogen plasma-treated multiwall carbon nanotubes in either pure titania or Nb-doped titania. The drop-coating method has been used to fabricate resistive oxygen sensors based on titania or on titania and carbon nanotube hybrids. Morphology and composition studies have revealed that the dispersion of low amounts of carbon nanotubes within the titania matrix does not significantly alter its crystallization behaviour. The gas sensitivity studies performed on the different samples have shown that the hybrid layers based on titania and carbon nanotubes possess an unprecedented responsiveness towards oxygen (i.e. more than four times higher than that shown by optimized Nb-doped TiO(2) films). Furthermore, hybrid sensors containing carbon nanotubes respond at significantly lower operating temperatures than their non-hybrid counterparts. These new hybrid sensors show a strong potential for monitoring traces of oxygen (i.e. <= 10 ppm) in a flow of CO(2), which is of interest for the beverage industry. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Bristol |
Editor |
|
Language |
|
Wos |
000258385600014 |
Publication Date |
2008-08-02 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0957-4484;1361-6528; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.44 |
Times cited |
48 |
Open Access |
|
Notes |
Pai |
Approved |
Most recent IF: 3.44; 2008 IF: 3.446 |
Call Number |
UA @ lucian @ c:irua:103083 |
Serial ![sorted by Serial field, descending order (down)](img/sort_desc.gif) |
282 |
Permanent link to this record |
|
|
|
Author |
Corthals, S.; van Noyen, J.; Geboers, J.; Vosch, T.; Liang, D.; Ke, X.; Hofkens, J.; Van Tendeloo, G.; Jacobs, P.; Sels, B. |
Title |
The beneficial effect of CO2 in the low temperature synthesis of high quality carbon nanofibers and thin multiwalled carbon nanotubes from CH_{4} over Ni catalysts |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
Volume |
50 |
Issue |
2 |
Pages |
372-384 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
A low temperature chemical vapor deposition method is described for converting CH4 into high-quality carbon nanofibers (CNFs) using a Ni catalyst supported on either spinel or perovskite oxides in the presence of CO2. The addition of CO2 has a significant influence on CNF purity and stability, while the CNF diameter distribution is significantly narrowed. Ultimately, the addition of CO2 changes the CNF structure from fishbone fibers to thin multiwalled carbon nanotubes. A new in situ cooling principle taking into account dry reforming chemistry and thermodynamics is introduced to account for the structural effects of CO2. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000297397700004 |
Publication Date |
2011-09-01 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
6.337 |
Times cited |
26 |
Open Access |
|
Notes |
Iwt; Iap |
Approved |
Most recent IF: 6.337; 2012 IF: 5.868 |
Call Number |
UA @ lucian @ c:irua:93626 |
Serial ![sorted by Serial field, descending order (down)](img/sort_desc.gif) |
228 |
Permanent link to this record |
|
|
|
Author |
Bittencourt, C.; Navio, C.; Nicolay, A.; Ruelle, B.; Godfroid, T.; Snyders, R.; Colomer, J.-F.; Lagos, M.J.; Ke, X.; Van Tendeloo, G.; Suarez-Martinez, I.; Ewels, C.P. |
Title |
Atomic oxygen functionalization of vertically aligned carbon nanotubes |
Type |
A1 Journal article |
Year |
2011 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
Volume |
115 |
Issue |
42 |
Pages |
20412-20418 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Vertically aligned multiwalled carbon nanotubes (v-MWCNTs) are functionalized using atomic oxygen generated in a microwave plasma. X-ray photoelectron spectroscopy depth profile analysis shows that the plasma treatment effectively grafts oxygen exclusively at the v-MWCNT tips. Electron microscopy shows that neither the vertical alignment nor the structure of v-MWCNTs were affected by the plasma treatment. Density functional calculations suggest assignment of XPS C 1s peaks at 286.6 and 287.5 eV, to epoxy and carbonyl functional groups, respectively. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos |
000296205600009 |
Publication Date |
2011-10-04 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1932-7447;1932-7455; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
4.536 |
Times cited |
31 |
Open Access |
|
Notes |
Iap |
Approved |
Most recent IF: 4.536; 2011 IF: 4.805 |
Call Number |
UA @ lucian @ c:irua:91890 |
Serial ![sorted by Serial field, descending order (down)](img/sort_desc.gif) |
174 |
Permanent link to this record |
|
|
|
Author |
Liu, J.; Hu, Z.-Y.; Peng, Y.; Huang, H.-W.; Li, Y.; Wu, M.; Ke, X.-X.; Van Tendeloo, G.; Su, B.-L. |
Title |
2D ZnO mesoporous single-crystal nanosheets with exposed {0001} polar facets for the depollution of cationic dye molecules by highly selective adsorption and photocatalytic decomposition |
Type |
A1 Journal article |
Year |
2016 |
Publication |
Applied catalysis : B : environmental |
Abbreviated Journal |
Appl Catal B-Environ |
Volume |
181 |
Issue |
181 |
Pages |
138-145 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Two dimensional (2D) ZnO nanosheets are ideal system for dimensionally confined transport phenomenon investigation owing to specific surface atomic configuration. Therefore, 2D ZnO porous nanosheets with single-crystal nature and {0001} polar facets, likely display some specific physicochemical properties. In this work, for the first time, 2D ZnO mesoporous single-crystal nanosheets (ZnO-MSN) with {0001} polar facets have been designed and prepared via an intriguing colloidal templating approach through controlling the infiltration speed for the suspension of EG-capped ZnO nanoparticles and polymer colloids. The EG-capped ZnO nanoparticles are very helpful for single-crystal nanosheet formation, while the polymer colloids play dual roles on the mesoporosity generation and {0001} polar facets formation within the mesopores. Such special 2D structure not only accelerates the hole-electron separation and the electron transportation owing to the single-crystal nature, but also enhances the selective adsorption of organic molecules owing to the porous structure and the exposed {0001} polar facets with more O-termination (000-1) surfaces: the 2D ZnO-MSN shows highly selective adsorption and significantly higher photodegradation for positively charged rhodamine B than those for negatively charged methyl orange and neutral phenol, comparing with ZnO nanoparticles (ZnO-NP) and ZnO commercial nanoparticles (ZnO-CNP) with high surface areas. This work may shed some light on better understanding the synthesis of 2D porous single-crystal nanosheet with exposed polar surfaces and photocatalytic mechanism of nanostructured semiconductors in a mixed organic molecules system. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
Language |
|
Wos |
000364256000015 |
Publication Date |
2015-08-01 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0926-3373; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
9.446 |
Times cited |
60 |
Open Access |
|
Notes |
246791 Countatoms |
Approved |
Most recent IF: 9.446 |
Call Number |
c:irua:127638 c:irua:127638 c:irua:127638 |
Serial ![sorted by Serial field, descending order (down)](img/sort_desc.gif) |
10 |
Permanent link to this record |