Home | << 1 2 3 4 5 6 7 8 9 10 11 12 13 >> |
![]() |
Records | |||||
---|---|---|---|---|---|
Author | Beckwee, E.J.; Watson, G.; Houlleberghs, M.; Arenas Esteban, D.; Bals, S.; Van Der Voort, P.; Breynaert, E.; Martens, J.; Baron, G.V.; Denayer, J.F.M. | ||||
Title | Enabling hydrate-based methane storage under mild operating conditions by periodic mesoporous organosilica nanotubes | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Heliyon | Abbreviated Journal | |
Volume | 9 | Issue | 7 | Pages | e17662-14 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Biomethane is a renewable natural gas substitute produced from biogas. Storage of this sustainable energy vector in confined clathrate hydrates, encapsulated in the pores of a host material, is a highly promising avenue to improve storage capacity and energy efficiency. Herein, a new type of periodic mesoporous organosilica (PMO) nanotubes, referred to as hollow ring PMO (HR-PMO), capable of promoting methane clathrate hydrate formation under mild working conditions (273 K, 3.5 MPa) and at high water loading (5.1 g water/g HR-PMO) is reported. Gravimetric uptake measurements reveal a steep single-stepped isotherm and a noticeably high methane storage capacity (0.55 g methane/g HR-PMO; 0.11 g methane/g water at 3.5 MPa). The large working capacity throughout consecutive pressure-induced clathrate hydrate formationdissociation cycles demonstrates the material's excellent recyclability (97% preservation of capacity). Supported by ex situ cryo-electron tomography and x-ray diffraction, HR-PMO nanotubes are hypothesized to promote clathrate hydrate nucleation and growth by distribution and confinement of water in the mesopores of their outer wall, along the central channels of the nanotubes and on the external nanotube surface. These findings showcase the potential for application of organosilica materials with hierarchical and interconnected pore systems for pressure-based storage of biomethane in confined clathrate hydrates. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001056264100001 | Publication Date | 2023-06-28 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2405-8440 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | 4 | Open Access | OpenAccess | |
Notes | E.J.B., G.W. and M.H. contributed equally to this work. M.H. acknowledges FWO for an FWO-SB fellowship. All authors acknowledge VLAIO for Moonshot funding (ARCLATH, n ? HBC.2019.0110, ARCLATH2, n ? HBC.2021.0254) . J.A.M. acknowledges the Flemish Government for long-term structural funding (Methusalem) and department EWI for infrastructure investment via the Hermes Fund (AH.2016.134) . NMRCoRe acknowledges the Flemish government, department EWI for financial support as International Research Infrastructure (I001321N: Nuclear Magnetic Resonance Spectroscopy Platform for Molecular Water Research) . J.A.M. acknowledges the European Research Council (ERC) for an Advanced Research Grant under the European Union's Horizon 2020 research and innovation program under grant agreement No. 834134 (WATUSO) . S.B acknowledges financial support by the Research Foundation Flanders (FWO grant G.0381.16N) . This project also received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 731019 (EUSMI) and No 815128 (REALNANO) . | Approved | Most recent IF: NA | ||
Call Number | UA @ admin @ c:irua:199249 | Serial | 8862 | ||
Permanent link to this record | |||||
Author | Ortega Saez, N.; Arno, R.; Marchetti, A.; Cauberghs, S.; Janssens, K.; Van der Snickt, G.; Al-Emam, E. | ||||
Title | Towards a novel strategy for soot removal from water-soluble materials : the synergetic effect of hydrogels and cyclomethicone on gelatine emulsion-based photographs | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Heritage science | Abbreviated Journal | |
Volume | 11 | Issue | 1 | Pages | 78-17 |
Keywords | A1 Journal article; Engineering sciences. Technology; Art; Antwerp Cultural Heritage Sciences (ARCHES); Antwerp X-ray Imaging and Spectroscopy (AXIS) | ||||
Abstract | Gels are a popular cleaning method for paper conservators and a lot of research has been done concerning gel cleaning of paper objects over the last 15 years. Despite the close interconnection between the conservation fields of paper and photographic material, research on using gels for cleaning photographs is very scarce. However, gels can provide an excellent cleaning method for photographic material. Cleaning silver gelatine prints with aqueous solvents is very complex due to the hydrophilic properties and fragility of the gelatine layer which makes mechanical cleaning difficult. The properties of gels ensure better control over the flow and evaporation of the solvent, facilitating the cleaning process. This study is the first insight into the viability of using gellan gum gel and polyvinyl acetate-borax (PVAc-borax) gel to clean contaminants from the surface of silver gelatine photographs. It is based on self-made samples that were artificially aged and contaminated with soot. Water, ethanol (EtOH), and Kodak Photo-flo were studied as solvents to remove the soot from the silver gelatine-based prints. These solvents were loaded into the aforementioned gels and applied to the samples in two different methods. These gel cleaning methods were subsequently compared with traditional cleaning methods. In addition, the usage of cyclomethicone D4 as a protective mask for the gelatine layer was studied. Measuring methods used to evaluate the cleaning were visual comparison, microscopic observation, and densitometry. ATR-FTIR measurements were also conducted to investigate potential side-effects of the cleaning methods on the prints, such as unwanted chemical transformations or the presence of gel residues after the treatments. Most of the gel cleaning methods within this study proved to be inadequate, with the exception of the gellan gum gel loaded with 30% EtOH. It was used as a granulated gel applied mechanically on a print saturated with cyclomethicone (octamethylcyclotetrasiloxane D4). Cyclomethicone proved to be a very effective protective barrier for the water-sensitive gelatine layer with minimal reduction in cleaning effectiveness. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000970139500001 | Publication Date | 2023-04-18 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2050-7445 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.5 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 2.5; 2023 IF: NA | |||
Call Number | UA @ admin @ c:irua:196445 | Serial | 8945 | ||
Permanent link to this record | |||||
Author | Koirala, B.; Rasti, B.; Bnoulkacem, Z.; De Lima Ribeiro, A.; Madriz, Y.; Herrmann, E.; Gestels, A.; De Kerf, T.; Janssens, K.; Steenackers, G.; Gloaguen, R.; Scheunders, P. | ||||
Title | An extensive multisensor hyperspectral benchmark datasets of intimate mixtures of mineral powders | Type | P1 Proceeding | ||
Year | 2023 | Publication ![]() |
IEEE International Geoscience and Remote Sensing Symposium proceedings T2 – IGARSS 2023 – 2023 IEEE International Geoscience and Remote Sensing Symposium, 16-21 July 2023, Pasadena, CA, USA | Abbreviated Journal | |
Volume | Issue | Pages | 5890-5893 T2 - IGARSS 2023 - 2023 IEEE Internation | ||
Keywords | P1 Proceeding; Economics; Vision lab; Antwerp X-ray Imaging and Spectroscopy (AXIS) | ||||
Abstract | Since many materials behave as heterogeneous intimate mixtures with which each photon interacts differently, the relationship between spectral reflectance and material composition is very complex. Quantitative validation of spectral unmixing algorithms requires high-quality ground truth fractional abundance data, which are very difficult to obtain.In this work, we generated a comprehensive hyperspectral dataset of intimate mineral powder mixtures by homogeneously mixing five different clay powders (Kaolin, Roof clay, Red clay, mixed clay, and Calcium hydroxide). In total 325 samples were prepared. Among the 325 samples, 60 mixtures were binary, 150 were ternary, 100 were quaternary, and 15 were quinary. For each mixture (and pure clay powder), reflectance spectra are acquired by 13 different sensors, with a broad wavelength range between the visible and the long-wavelength infrared regions (i.e., between 350 nm and 15385 nm) and with a large variation in sensor types, platforms, and acquisition conditions. We will make this dataset public, to be used by the community for the validation of nonlinear unmixing methodologies (https://github.com/VisionlabUA/Multisensor_datasets) | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001098971606002 | Publication Date | 2023-10-20 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 979-83-503-2010-7 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | Times cited | Open Access | |||
Notes | Approved | Most recent IF: NA | |||
Call Number | UA @ admin @ c:irua:201596 | Serial | 9035 | ||
Permanent link to this record | |||||
Author | Harrabi, K.; Gasmi, K.; Mekki, A.; Bahlouli, H.; Kunwar, S.; Milošević, M.V. | ||||
Title | Detection and measurement of picoseconds-pulsed laser energy using a NbTiN superconducting filament | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
IEEE transactions on applied superconductivity | Abbreviated Journal | |
Volume | 33 | Issue | 5 | Pages | 2400205-5 |
Keywords | A1 Journal article; Condensed Matter Theory (CMT) | ||||
Abstract | investigate non-equilibrium states created by a laser beam incident on a superconducting NbTiN filament subject to an electrical pulse at 4 K. In absence of the laser excitation, when the amplitude of the current pulse applied to the filament exceeds the critical current value, we monitored the delay time td that marks the collapse of the superconducting phase which is then followed by a voltage rise. We linked the delay time to the applied current using the time-dependent Ginzburg-Landau (TDGL) theory, which enabled us to deduce the cooling (or heat-removal) time from the fit to the experimental data. Subsequently, we exposed the filament biased with a current pulse close to its critical value to a focused laser beam, inducing a normal state in the impact region of the laser beam. We showed that the energy of the incident beam and the incurred delay time are related to each other by a simple expression, that enables direct measurement of incident beam energy by temporal monitoring of the transport response. This method can be extended for usage in single-photon detection regime, and be used for accurate calibration of an arbitrary light source. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000946265900016 | Publication Date | 2023-02-14 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1051-8223 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 1.8 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 1.8; 2023 IF: NA | |||
Call Number | UA @ admin @ c:irua:195110 | Serial | 7295 | ||
Permanent link to this record | |||||
Author | Cui, Z.; Jafarzadeh, A.; Hao, Y.; Liu, L.; Li, L.; Zheng, Y. | ||||
Title | Prediction of the decomposition tendency of C5F10O on discharged metal surfaces | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
IEEE transactions on dielectrics and electrical insulation | Abbreviated Journal | |
Volume | 30 | Issue | 3 | Pages | 1365-1367 |
Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | In this letter, a dipole sheet method is proposed to theoretically study the adsorption and decomposition of C5F10O over-discharged Cu (111) and Al (111) surfaces. A synergistic effect of external electric fields and surface excess charges shows up for jointly promoting the adsorption of C5F10O, accompanied by the enhancement of C-F bond elongation and charge transfer process. The decomposition of C5F10O is facilitated in the discharged region and the initial decomposition is found most likely to occur via the cleavage of the C-F single bond. The results indicate that the decomposition of C5F10O over the metal electrode surfaces is much accelerated when discharge faults occur and free F atoms could be generated from C5F10O before its carbon chain breakage. These findings help to elucidate the underlying decomposition tendency of C5F10O in discharged systems and provide a practical method for evaluating and designing new insulation gases. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001000675800054 | Publication Date | 2023-03-29 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1070-9878 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.1 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 3.1; 2023 IF: 2.115 | |||
Call Number | UA @ admin @ c:irua:197319 | Serial | 9076 | ||
Permanent link to this record | |||||
Author | Wittner, N.; Vasilakou, K.; Broos, W.; Vlaeminck, S.E.; Nimmegeers, P.; Cornet, I. | ||||
Title | Investigating the technical and economic potential of solid-state fungal pretreatment at nonsterile conditions for sugar production from poplar wood | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Industrial and engineering chemistry research | Abbreviated Journal | |
Volume | Issue | Pages | 1-11 | ||
Keywords | A1 Journal article; Economics; Engineering sciences. Technology; Engineering Management (ENM); Sustainable Energy, Air and Water Technology (DuEL); Biochemical Wastewater Valorization & Engineering (BioWaVE); Intelligence in PRocesses, Advanced Catalysts and Solvents (iPRACS) | ||||
Abstract | Pretreatment is crucial for the conversion of lignocellulose to biofuels. Unlike conventional chemical/physicochemical methods, fungal pretreatment uses white-rot fungi and mild reaction conditions. However, challenges, including substrate sterilization, long duration, and low sugar yields associated with this method, contribute to lower techno-economic performance, an aspect that has rarely been investigated. This study aimed to evaluate the feasibility of fungal pretreatment of nonsterilized poplar wood. Various factors, including inoculum types, fermentation supplements, and cultivation methods, were investigated to optimize the process. A techno-economic assessment of the optimized processes was performed at a full biorefinery scale. The scenario using nonsterilized wood as a substrate, precolonized wood as an inoculum, and a 4 week pretreatment showed a 14.5% reduction in sugar production costs (€2.15/kg) compared to using sterilized wood. Although the evaluation of nonsterilized wood pretreatment showed promising cost reductions, fungal pretreatment remained more expensive than conventional methods due to the significant capital investment required. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001102138000001 | Publication Date | 2023-10-25 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0888-5885; 1520-5045 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 4.2 | Times cited | Open Access | Not_Open_Access: Available from 24.04.2024 | |
Notes | Approved | Most recent IF: 4.2; 2023 IF: 2.843 | |||
Call Number | UA @ admin @ c:irua:200155 | Serial | 8891 | ||
Permanent link to this record | |||||
Author | Scandura, G.; Kumari, P.; Palmisano, G.; Karanikolos, G.N.; Orwa, J.; Dumee, L.F. | ||||
Title | Nanoporous Dealloyed Metal Materials Processing and Applications?A Review | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Industrial and engineering chemistry research | Abbreviated Journal | |
Volume | Issue | Pages | |||
Keywords | A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL) | ||||
Abstract | The development of porous metal materials with pore geometries and sizes at the nanoscale offers promising opportunities for the development of smart responsive interfaces for separation and catalytic applications and as building blocks for complex composite materials. Dealloying is an innovative technique based on selective removal of a sacrificial metal from a metal alloy to engineer surface textures and pores across significant thicknesses. Dealloyed structures may be processed over large scales and for a range of source alloys, offering unprecedented manufacturing opportunities. This review presents the operations and challenges of dealloying routes and discusses avenues for process optimizations and improvements, aiming at the development of scalable nanoporous materials. The potential of dealloyed materials for catalytic and sensing applications is expanded and benchmarked against reference materials. Future prospects and applications of dealloyed materials toward surface reactivity control and pore architecture development are highlighted. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000918107700001 | Publication Date | 2023-01-13 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0888-5885; 1520-5045 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.2 | Times cited | Open Access | Not_Open_Access | |
Notes | Approved | Most recent IF: 4.2; 2023 IF: 2.843 | |||
Call Number | UA @ admin @ c:irua:199419 | Serial | 8904 | ||
Permanent link to this record | |||||
Author | Gamon, J.; Bassat, J.-M.; Villesuzanne, A.; Duttine, M.; Batuk, M.; Vandemeulebroucke, D.; Hadermann, J.; Alassani, F.; Weill, F.; Durand, E.; Demourgues, A. | ||||
Title | Impact of anionic ordering on the iron site distribution and valence states in oxyfluoride Sr2FeO3+xF1-x(x=0.08, 0.2) with a layered Perovskite network | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Inorganic chemistry | Abbreviated Journal | |
Volume | 62 | Issue | 27 | Pages | 10822-10832 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Sr2FeO3+x F1-x (x = 0.08, 0.2), an n = 1 Ruddlesden-Popperphase, was synthesized from the oxidationof Sr2FeO3F in air at high temperature followinga fluorine for oxygen substitution and Fe3+ to Fe4+ oxidation. A structural investigation of both compounds was performedusing complementary and high-resolution techniques (Synchrotron X-rayand electron diffraction, Mo''ssbauer spectroscopy, HR-STEM)coupled to DFT calculation. This study reveals that oxidation leadsto a high degree of apical anion disorder coupled to antiphase boundaries. Sr2FeO3F, an oxyfluoride compoundwith an n = 1 Ruddlesden-Popper structure,was identifiedas a potential interesting mixed ionic and electronic conductor (MIEC).The phase can be synthesized under a range of different pO(2) atmospheres, leading to various degrees of fluorinefor oxygen substitution and Fe4+ content. A structuralinvestigation and thorough comparison of both argon- and air-synthesizedcompounds were performed by combining high-resolution X-ray and electrondiffraction, high-resolution scanning transmission electron microscopy,Mo''ssbauer spectroscopy, and DFT calculations. While the argon-synthesizedphase shows a well-behaved O/F ordered structure, this study revealedthat oxidation leads to averaged large-scale anionic disorder on theapical site. In the more oxidized Sr2FeO3.2F0.8 oxyfluoride, containing 20% of Fe4+, two differentFe positions can be identified with a 32%/68% occupancy (P4/nmm space group). This originates due to the presenceof antiphase boundaries between ordered domains within the grains.Relations between site distortion and valence states as well as stabilityof apical anionic sites (O vs F) are discussed. This study paves theway for further studies on both ionic and electronic transport propertiesof Sr2FeO3.2F0.8 and its use in MIEC-baseddevices, such as solid oxide fuel cells. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001018974700001 | Publication Date | 2023-06-29 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0020-1669 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 4.6 | Times cited | Open Access | Not_Open_Access | |
Notes | Approved | Most recent IF: 4.6; 2023 IF: 4.857 | |||
Call Number | UA @ admin @ c:irua:197789 | Serial | 8881 | ||
Permanent link to this record | |||||
Author | Luo, Y.; He, Y.; Ding, Y.; Zuo, L.; Zhong, C.; Ma, Y.; Sun, M. | ||||
Title | Defective biphenylene as high-efficiency hydrogen evolution catalysts | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Inorganic chemistry | Abbreviated Journal | |
Volume | 63 | Issue | 2 | Pages | 1136-1141 |
Keywords | A1 Journal article; Condensed Matter Theory (CMT) | ||||
Abstract | Electrocatalysts play a pivotal role in advancing the application of water splitting for hydrogen production. This research unveils the potential of defective biphenylenes as high-efficiency catalysts for the hydrogen evolution reaction. Using first-principles simulations, we systematically investigated the structure, stability, and catalytic performance of defective biphenylenes. Our findings unveil that defect engineering significantly enhances the electrocatalytic activity for hydrogen evolution. Specifically, biphenylene with a double-vacancy defect exhibits an outstanding Gibbs free energy of -0.08 eV, surpassing that of Pt, accompanied by a remarkable exchange current density of -3.08 A cm(-2), also surpassing that of Pt. Furthermore, we find the preference for the Volmer-Heyrovsky mechanism in the hydrogen evolution reaction, with a low energy barrier of 0.80 eV. This research provides a promising avenue for developing novel metal-free electrocatalysts for water splitting with earth-abundant carbon elements, making a significant step toward sustainable hydrogen production. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001143581300001 | Publication Date | 2023-12-31 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0020-1669 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 4.6 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 4.6; 2023 IF: 4.857 | |||
Call Number | UA @ admin @ c:irua:202780 | Serial | 9018 | ||
Permanent link to this record | |||||
Author | Deylgat, E.; Chen, E.; Sorée, B.; Vandenberghe, W.G. | ||||
Title | Quantum transport study of contact resistance of edge- and top-contacted two-dimensional materials | Type | P1 Proceeding | ||
Year | 2023 | Publication ![]() |
International Conference on Simulation of Semiconductor Processes and Devices : [proceedings] T2 – International Conference on Simulation of Semiconductor Processes and, Devices (SISPAD), SEP 27-29, 2023, Kobe, Japan | Abbreviated Journal | |
Volume | Issue | Pages | 45-48 | ||
Keywords | P1 Proceeding; Condensed Matter Theory (CMT) | ||||
Abstract | We calculate the contact resistance for an edge- and top-contacted 2D semiconductor. The contact region consists of a metal contacting a monolayer of MoS2 which is otherwise surrounded by SiO2. We use the quantum transmitting boundary method to compute the contact resistance as a function of the 2D semiconductor doping concentration. An effective mass Hamiltonian is used to describe the properties of the various materials. The electrostatic potentials are obtained by solving the Poisson equation numerically. We incorporate the effects of the image-force barrier lowering on the Schottky barrier and examine the impact on the contact resistance. At low doping concentrations, the contact resistance of the top contact is lower compared to edge contact, while at high doping concentrations, the edge contact exhibits lower resistance. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001117703800012 | Publication Date | 2023-11-20 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 978-4-86348-803-8 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | Times cited | Open Access | |||
Notes | Approved | Most recent IF: NA | |||
Call Number | UA @ admin @ c:irua:202839 | Serial | 9079 | ||
Permanent link to this record | |||||
Author | Van Hoecke, L.; Kummamuru, N.B.; Pourfallah, H.; Verbruggen, S.W.; Perreault, P. | ||||
Title | Intensified swirling reactor for the dehydrogenation of LOHC | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
International journal of hydrogen energy | Abbreviated Journal | |
Volume | Issue | Pages | 1-13 | ||
Keywords | A1 Journal article; Engineering sciences. Technology | ||||
Abstract | In the recent advances towards more sustainable global energy supply, H2 is a possible alternative for large scale energy storage. In this view, Liquid Organic Hydrogen Carriers (LOHC) are a class of molecules that allow for easier long term energy storage compared to conventional H2 technologies. CFD simulations were used to showcase the hydrodynamics of the dehydrogenation of a LOHC in a new reactor unit, via a cold flow mock-up study. This reactor was designed to allow for a swirling motion of the liquid carrier material, favouring the removal of H2 gas from the flow and forcing the equilibrium of the reaction towards dehydrogenation, as well as to keep the catalyst particles in motion. The CFD simulations were validated qualitatively with experimental operation of the reactor, in a system with identical dimensionless numbers (Reynolds and Stokes), in order to use less costly products during the prototyping phase. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001139598200001 | Publication Date | 2023-08-30 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0360-3199 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 7.2 | Times cited | Open Access | Not_Open_Access: Available from 01.03.2024 | |
Notes | Approved | Most recent IF: 7.2; 2023 IF: 3.582 | |||
Call Number | UA @ admin @ c:irua:198534 | Serial | 8889 | ||
Permanent link to this record | |||||
Author | Zheng, J.; Zhang, H.; Lv, J.; Zhang, M.; Wan, J.; Gerrits, N.; Wu, A.; Lan, B.; Wang, W.; Wang, S.; Tu, X.; Bogaerts, A.; Li, X. | ||||
Title | Enhanced NH3Synthesis from Air in a Plasma Tandem-Electrocatalysis System Using Plasma-Engraved N-Doped Defective MoS2 | Type | A1 Journal Article | ||
Year | 2023 | Publication ![]() |
JACS Au | Abbreviated Journal | JACS Au |
Volume | 3 | Issue | 5 | Pages | 1328-1336 |
Keywords | A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
Abstract | We have developed a sustainable method to produce NH3 directly from air using a plasma tandem-electrocatalysis system that operates via the N2−NOx−NH3 pathway. To efficiently reduce NO2− to NH3, we propose a novel electrocatalyst consisting of defective N-doped molybdenum sulfide nanosheets on vertical graphene arrays (N-MoS2/VGs). We used a plasma engraving process to form the metallic 1T phase, N doping, and S vacancies in the electrocatalyst simultaneously. Our system exhibited a remarkable NH3 production rate of 7.3 mg h−1 cm−2 at −0.53 V vs RHE, which is almost 100 times higher than the state-of-the-art electrochemical nitrogen reduction reaction and more than double that of other hybrid systems. Moreover, a low energy consumption of only 2.4 MJ molNH3−1 was achieved in this study. Density functional theory calculations revealed that S vacancies and doped N atoms play a dominant role in the selective reduction of NO2− to NH3. This study opens up new avenues for efficient NH3 production using cascade systems. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000981779300001 | Publication Date | 2023-05-22 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2691-3704 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | Open Access | Not_Open_Access | ||
Notes | ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China (51976191, 5227060056, 52276214) and the National Key Technologies R&D Program of China (2018YFE0117300). N.G. was financially supported through an NWO Rubicon Grant (019.202EN.012). X.T. acknowl- edges the support of the Engineering and Physical Sciences Research Council (EP/X002713/1). | Approved | Most recent IF: NA | ||
Call Number | PLASMANT @ plasmant @c:irua:196761 | Serial | 8792 | ||
Permanent link to this record | |||||
Author | Zhang, H.; Jin, Q.; Hu, T.; Liu, X.; Zhang, Z.; Hu, C.; Zhou, Y.; Han, Y.; Wang, X. | ||||
Title | Electron-irradiation-facilitated production of chemically homogenized nanotwins in nanolaminated carbides | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of Advanced Ceramics | Abbreviated Journal | |
Volume | 12 | Issue | 6 | Pages | 1288-1297 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Twin boundaries have been exploited to stabilize ultrafine grains and improve mechanical properties of nanomaterials. The production of the twin boundaries and nanotwins is however prohibitively challenging in carbide ceramics. Using a scanning transmission electron microscope as a unique platform for atomic-scale structure engineering, we demonstrate that twin platelets could be produced in carbides by engineering antisite defects. The antisite defects at metal sites in various layered ternary carbides are collectively and controllably generated, and the metal elements are homogenized by electron irradiation, which transforms a twin-like lamellae into nanotwin platelets. Accompanying chemical homogenization, alpha-Ti3AlC2 transforms to unconventional beta-Ti3AlC2. The chemical homogeneity and the width of the twin platelets can be tuned by dose and energy of bombarding electrons. Chemically homogenized nanotwins can boost hardness by similar to 45%. Our results provide a new way to produce ultrathin (< 5 nm) nanotwin platelets in scientifically and technologically important carbide materials and showcase feasibility of defect engineering by an angstrom-sized electron probe. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001004930200012 | Publication Date | 2023-04-19 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2226-4108; 2227-8508 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 16.9 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 16.9; 2023 IF: 1.198 | |||
Call Number | UA @ admin @ c:irua:197470 | Serial | 8860 | ||
Permanent link to this record | |||||
Author | Duran, T.A.; Yayak, Y.O.; Aydin, H.; Peeters, F.M.; Yagmurcukardes, M. | ||||
Title | A perspective on the state-of-the-art functionalized 2D materials | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of applied physics | Abbreviated Journal | |
Volume | 134 | Issue | 12 | Pages | 120901-120929 |
Keywords | A1 Journal article; Condensed Matter Theory (CMT) | ||||
Abstract | Two-dimensional (2D) ultra-thin materials are more crucial than their bulk counterparts for the covalent functionalization of their surface owing to atomic thinness, large surface-to-volume ratio, and high reactivity of surface atoms having unoccupied orbitals. Since the surface of a 2D material is composed of atoms having unoccupied orbitals, covalent functionalization enables one to improve or precisely modify the properties of the ultra-thin materials. Chemical functionalization of 2D materials not only modifies their intrinsic properties but also makes them adapted for nanotechnology applications. Such engineered materials have been used in many different applications with their improved properties. In the present Perspective, we begin with a brief history of functionalization followed by the introduction of functionalized 2D materials. Our Perspective is composed of the following sections: the applications areas of 2D graphene and graphene oxide crystals, transition metal dichalcogenides, and in-plane anisotropic black phosphorus, all of which have been widely used in different nanotechnology applications. Finally, our Perspectives on the future directions of applications of functionalized 2D materials are given. The present Perspective sheds light on the current progress in nanotechnological applications of engineered 2D materials through surface functionalization. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001087770500008 | Publication Date | ||
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0021-8979; 1089-7550 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 3.2 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 3.2; 2023 IF: 2.068 | |||
Call Number | UA @ admin @ c:irua:201281 | Serial | 9000 | ||
Permanent link to this record | |||||
Author | Liu, J.; Xu, W.; Xiao, Y.M.; Ding, L.; Li, H.W.; Peeters, F.M. | ||||
Title | Optical spectrum of n-type and p-type monolayer MoS₂ in the presence of proximity-induced interactions | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of applied physics | Abbreviated Journal | |
Volume | 134 | Issue | 22 | Pages | 224301-224307 |
Keywords | A1 Journal article; Condensed Matter Theory (CMT) | ||||
Abstract | In this paper, we examined the effects of proximity-induced interactions such as Rashba spin-orbit coupling and effective Zeeman fields (EZFs) on the optical spectrum of n-type and p-type monolayer (ML)-MoS2. The optical conductivity is evaluated using the standard Kubo formula under random-phase approximation by including the effective electron-electron interaction. It has been found that there exist two absorption peaks in n-type ML-MoS2 and two knife shaped absorptions in p-type ML-MoS2, which are contributed by the inter-subband spin-flip electronic transitions within conduction and valence bands at valleys K and K ' with a lifted valley degeneracy. The optical absorptions in n-type and p-type ML-MoS 2 occur in THz and infrared radiation regimes and the position, height, and shape of them can be effectively tuned by Rashba parameter, EZF parameters, and carrier density. The interesting theoretical predictions in this study would be helpful for the experimental observation of the optical absorption in infrared to THz bandwidths contributed by inter-subband spin-flip electronic transitions in a lifted valley degeneracy monolayer transition metal dichalcogenides system. The obtained results indicate that ML-MoS2 with the platform of proximity interactions make it a promising infrared and THz material for optics and optoelectronics. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001135684400003 | Publication Date | 2023-12-11 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0021-8979; 1089-7550 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 3.2 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 3.2; 2023 IF: 2.068 | |||
Call Number | UA @ admin @ c:irua:202777 | Serial | 9069 | ||
Permanent link to this record | |||||
Author | Sargin, G.O.; Sarikurt, S.; Sevincli, H.; Sevik, C. | ||||
Title | The peculiar potential of transition metal dichalcogenides for thermoelectric applications : a perspective on future computational research | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of applied physics | Abbreviated Journal | |
Volume | 133 | Issue | 15 | Pages | 150902-150937 |
Keywords | A1 Journal article; Condensed Matter Theory (CMT) | ||||
Abstract | The peculiar potential transition metal dichalcogenides in regard to sensor and device applications have been exhibited by both experimental and theoretical studies. The use of these materials, thermodynamically stable even at elevated temperatures, particularly in nano- and optoelectronic technology, is about to come true. On the other hand, the distinct electronic and thermal transport properties possessing unique coherency, which may result in higher thermoelectric efficiency, have also been reported. However, exploiting this potential in terms of power generation and cooling applications requires a deeper understanding of these materials in this regard. This perspective study, concentrated with this intention, summarizes thermoelectric research based on transition metal dichalcogenides from a broad perspective and also provides a general evaluation of future theoretical investigations inevitable to shed more light on the physics of electronic and thermal transport in these materials and to lead future experimental research. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001079329000001 | Publication Date | 2023-04-27 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0021-8979; 1089-7550 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.2 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 3.2; 2023 IF: 2.068 | |||
Call Number | UA @ admin @ c:irua:200351 | Serial | 9105 | ||
Permanent link to this record | |||||
Author | Mehmonov, K.; Ergasheva, A.; Yusupov, M.; Khalilov, U. | ||||
Title | The role of carbon monoxide in the catalytic synthesis of endohedral carbyne | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of applied physics | Abbreviated Journal | |
Volume | 134 | Issue | 14 | Pages | 144303-144307 |
Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | The unique physical properties of carbyne, a novel carbon nanostructure, have attracted considerable interest in modern nanotechnology. While carbyne synthesis has been accomplished successfully using diverse techniques, the underlying mechanisms governing the carbon monoxide-dependent catalytic synthesis of endohedral carbyne remain poorly understood. In this simulation-based study, we investigate the synthesis of endohedral carbyne from carbon and carbon monoxide radicals in the presence of a nickel catalyst inside double-walled carbon nanotubes with a (5,5)@(10,10) structure. The outcome of our investigation demonstrates that the incorporation of the carbon atom within the Ni-n@(5,5)@(10,10) model system initiates the formation of an elongated carbon chain. In contrast, upon the introduction of carbon monoxide radicals, the growth of the carbyne chain is inhibited as a result of the oxidation of endohedral nickel clusters by oxygen atoms after the initial steps of nucleation. Our findings align with prior theoretical, simulation, and experimental investigations, reinforcing their consistency and providing valuable insights into the synthesis of carbyne-based nanodevices that hold promising potential for future advancements in nanotechnology. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001083993400003 | Publication Date | 2023-10-10 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0021-8979; 1089-7550 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 3.2 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 3.2; 2023 IF: 2.068 | |||
Call Number | UA @ admin @ c:irua:201233 | Serial | 9106 | ||
Permanent link to this record | |||||
Author | Tchakoua, T.; Gerrits, N.; Smeets, E.W.F.; Kroes, G.-J. | ||||
Title | SBH17 : benchmark database of barrier heights for dissociative chemisorption on transition metal surfaces | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of chemical theory and computation | Abbreviated Journal | |
Volume | 19 | Issue | 1 | Pages | 245-270 |
Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | Accurate barriers for rate controlling elementary reactions on metal surfaces are key to understanding, controlling, and predicting the rate of heterogeneously catalyzed processes. While barrier heights for gas phase reactions have been extensively benchmarked, dissociative chemisorption barriers for the reactions of molecules on metal surfaces have received much less attention. The first database called SBH10 and containing 10 entries was recently constructed based on the specific reaction parameter approach to density functional theory (SRP-DFT) and experimental results. We have now constructed a new and improved database (SBH17) containing 17 entries based on SRP-DFT and experiments. For this new SBH17 benchmark study, we have tested three algorithms (high, medium, and light) for calculating barrier heights for dissociative chemisorption on metals, which we have named for the amount of computational effort involved in their use. We test the performance of 14 density functionals at the GGA, GGA+vdW-DF, and meta-GGA rungs. Our results show that, in contrast with the previous SBH10 study where the BEEF-vdW-DF2 functional seemed to be most accurate, the workhorse functional PBE and the MS2 density functional are the most accurate of the GGA and meta-GGA functionals tested. Of the GGA+vdW functionals tested, the SRP32-vdW-DF1 functional is the most accurate. Additionally, we found that the medium algorithm is accurate enough for assessing the performance of the density functionals tested, while it avoids geometry optimizations of minimum barrier geometries for each density functional tested. The medium algorithm does require metal lattice constants and interlayer distances that are optimized separately for each functional. While these are avoided in the light algorithm, this algorithm is found not to give a reliable description of functional performance. The combination of relative ease of use and demonstrated reliability of the medium algorithm will likely pave the way for incorporation of the SBH17 database in larger databases used for testing new density functionals and electronic structure methods. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000903286100001 | Publication Date | 2022-12-19 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1549-9618 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.5 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 5.5; 2023 IF: 5.245 | |||
Call Number | UA @ admin @ c:irua:193426 | Serial | 7274 | ||
Permanent link to this record | |||||
Author | Sauve, G.; Esguerra, J.L.; Laner, D.; Johansson, J.; Svensson, N.; Van Passel, S.; Van Acker, K. | ||||
Title | Integrated early-stage environmental and economic assessment of emerging technologies and its applicability to the case of plasma gasification | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of cleaner production | Abbreviated Journal | |
Volume | 382 | Issue | Pages | 134684-14 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM) | ||||
Abstract | Economic and environmental impact assessments are increasingly being adopted in the design and implementation of emerging systems. However, their emerging nature leads to several assessment challenges that need to be addressed to ensure the validity and usefulness of results in understanding their potential performance and supporting their development. There is the need to (i) account for spatial and temporal variability to allow a broader perspective at an early stage of development; (ii) handle uncertainties to systematically identify the critical factors and their interrelations that drive the results; (iii) integrate environmental and economic results to support sound decision-making based on two sustainability aspects. To address these assessment challenges, this study presents an alternative approach with the following corresponding features: (i) multiple scenario development to conduct an exploratory assessment of the systems under varying conditions and settings, (ii) global sensitivity analysis to identify the main critical factors and their interrelations, and (iii) trade-off and ecoefficiency analysis to integrate the economic and environmental results. The integrated approach is applied to a case study on plasma gasification for solid waste management. The results of the study highlight how the approach allows the identification of the dynamic relations between project settings and surrounding conditions. For example, the choice of gasifying agent largely depends on the background energy system, which dictates the impacts of the process energy requirement and the savings from the substituted energy of the syngas output. Based on these findings, the usefulness and validity of the proposed integrated approach are discussed in terms of how the key assessment challenges are addressed and how it can provide guidance for the development of emerging systems. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000906664200001 | Publication Date | 2022-10-22 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0959-6526 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 11.1 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 11.1; 2023 IF: 5.715 | |||
Call Number | UA @ admin @ c:irua:193464 | Serial | 7361 | ||
Permanent link to this record | |||||
Author | Buyle, M.; Audenaert, A.; Brusselaers, J.; Van Passel, S. | ||||
Title | Rebound effects following technological advancement? The case of a global shock in ferrochrome supply | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of cleaner production | Abbreviated Journal | |
Volume | 391 | Issue | Pages | 136264-11 | |
Keywords | A1 Journal article; Economics; Engineering sciences. Technology; Energy and Materials in Infrastructure and Buildings; Engineering Management (ENM) | ||||
Abstract | Novel recycling technologies aim at increasing material efficiency by turning former waste products into valuable reclaimed resources. A key question is whether such technologies really reduce primary resource consumption or instead stimulate aggregated market demand. In this study the consequences of a positive shock in ferrochrome supply to the global stainless steel value chain is assessed quantitatively. This new source might be unlocked by technology under development for the recovery of chromium from carbon and stainless steel slags. The aim of this study is to quantitatively assess the income and substitution effects of reclaimed ferrochrome along a part of the stainless steel value chain. The impact of the supply shock is analysed by means of a vector autoregression (VAR), a dynamic model where lagged values of all included variables estimate current state of the system. Additionally, the VAR model is extended to a structural vector autoregression (SVAR) to account for contemporary effects as well. Both the VAR and SVAR model indicate that additional ferrochrome supply leads to an increase in aggregated supply of stainless steel, in combination with a substitution effect between ferrochrome and nickel. The extended SVAR model additionally highlights that contemporaneous effects do play an important role as well to capture the direct rebound effect in the ferrochrome market when working with quarterly data. In other words, an additional supply of reclaimed ferrochrome triggers a complex combination of interactions and consequences, yet it does not necessarily lead to a lower overall material consumption. The main contributions of this paper are the assessment of direct rebound effects of supplying reclaimed metals along the value chain and the demonstration that quantifying the effects of circular strategies is feasible. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000930165300001 | Publication Date | 2023-01-30 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0959-6526 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 11.1 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 11.1; 2023 IF: 5.715 | |||
Call Number | UA @ admin @ c:irua:193569 | Serial | 7365 | ||
Permanent link to this record | |||||
Author | Vingerhoets, R.; Spiller, M.; De Backer, J.; Adriaens, A.; Vlaeminck, S.E.; Meers, E. | ||||
Title | Detailed nitrogen and phosphorus flow analysis, nutrient use efficiency and circularity in the agri-food system of a livestock-intensive region | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of cleaner production | Abbreviated Journal | |
Volume | 410 | Issue | Pages | 137278-13 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) | ||||
Abstract | The agri-food value chain is a major cause of nitrogen (N) and phosphorus (P) emissions and associated environmental and health impacts. The EU's farm-to-fork strategy (F2F) demands an agri-food value chain approach to reduce nutrient emissions by 50% and fertilizer use by 20%. Substance flow analysis (SFA) is a method that can be applied to study complex systems such as the agri-food chain. A review of 60 SFA studies shows that they often lack detail by not sufficiently distinguishing between nodes, products and types of emissions. The present study aims to assess the added value of detail in SFAs and to illustrate that valuable indicators can be derived from detailed assessments. This aim will be attained by presenting a highly-detailed SFA for the livestock-intensive region of Flanders, Belgium. The SFA distinguishes 40 nodes and 1827 flows that are classified into eight different categories (e.g. by-products, point source emissions) following life cycle methods. Eight novel indicators were calculated, including indicators that assess the N and P recovery potential. Flanders has a low overall nutrient use efficiency (11% N, 18% P). About 55% of the N and 56% of the P embedded in recoverable streams are reused providing 35% and 37% of the total N and P input. Optimized nutrient recycling could replace 45% of N and 48% of P of the external nutrient input, exceeding the target set by the F2F strategy. Detailed accounting for N and P flows and nodes leads to the identification of more recoverable streams and larger N and P flows. More detailed flow accounting is a prerequisite for the quantification of technological intervention options. Future research should focus on including concentration and quality as a parameter in SFAs. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000991013600001 | Publication Date | 2023-04-21 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0959-6526 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 11.1 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 11.1; 2023 IF: 5.715 | |||
Call Number | UA @ admin @ c:irua:196227 | Serial | 7770 | ||
Permanent link to this record | |||||
Author | Borms, L.; Van Opstal, W.; Brusselaers, J.; Van Passel, S. | ||||
Title | The working future : an analysis of skills needed by circular startups | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of cleaner production | Abbreviated Journal | |
Volume | 409 | Issue | Pages | 137261-137269 | |
Keywords | A1 Journal article; Economics; Engineering sciences. Technology; Engineering Management (ENM) | ||||
Abstract | Aside from potential environmental benefits, the implementation of circular economy principles in businesses can have merits for the labour market. The current unemployment in several regions of Europe and the qualitative mismatch between supply and demand could be countered by reskilling the labour force to adjust supply and demand to one another for increased reuse, repair, or recycling, among others. This study uses interviews to increase the focus of the research question and uses survey data to perform an ordered probit regression analysis to sketch the current and future landscape of startups’ skills in Flanders (Belgium), and to analyse the relationship between circular strategies and different types of skills. The results show that design to lower material use increases the need for transport and logistics skills, digitalisation increases the need for R&D and IT skills, and the recuperation of waste requires technical knowledge. Furthermore, gender, age, and experience of the entrepreneur influence the needed skills. The paper probed for policy recommendations for the uptake of circular strategies and recommendations for future research. The most asked policy measures by the respondents are innovation and collaboration support (subsidies), fiscal measures that support circular goods and services, and public procurement for circular goods and services. This research is of relevance for several stakeholders, such as startup ecosystems, sector organisations, policy makers in innovation policy and labour market policy, and educational institutions. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000988763400001 | Publication Date | 2023-04-21 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0959-6526 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 11.1 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 11.1; 2023 IF: 5.715 | |||
Call Number | UA @ admin @ c:irua:195706 | Serial | 9246 | ||
Permanent link to this record | |||||
Author | Ivanov, V.; Paunska, T.; Lazarova, S.; Bogaerts, A.; Kolev, S. | ||||
Title | Gliding arc/glow discharge for CO2 conversion: Comparing the performance of different discharge configurations | Type | A1 Journal Article;CO2 conversion | ||
Year | 2023 | Publication ![]() |
Journal of CO2 Utilization | Abbreviated Journal | |
Volume | 67 | Issue | Pages | 102300 | |
Keywords | A1 Journal Article;CO2 conversion; CO2 dissociation; Low current gliding arc; Magnetic stabilization; Magnetically stabilized discharge; Gliding glow discharge; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
Abstract | We studied the use of low current (hundreds of milliamperes) gliding arc/glow discharges for CO2 dissociation, at atmospheric pressure, in three different configurations. All of these are based on the gliding arc design with flat diverging electrodes. The discharge is mainly in the normal glow regime with contracted positive column. The CO2 gas is injected from a nozzle, at the closest separation between the electrodes. A pair of quartz glasses is placed on both sides of the electrodes, so that the gas flow is restricted to the active plasma area, between the electrodes. For two of the tested configurations, an external magnetic field was applied, to create a magnetic force, both in the direction of the gas flow, and opposite to the gas flow. In the first case, the arc is accelerated, shortening the period between ignition and extinction, while in the second case, it is stabilized (magneticallystabilized). We studied two quantities, namely the CO2 conversion and the energy efficiency of the conversion. Generally, the CO2 conversion decreases with increasing flow rate and increases with power. The energy efficiency increases with the flow rate, for all configurations. The magnetically-stabilized configuration is more stable and efficient at low gas flow rates, but has poor performance at high flow rates, while the non-stabilized configurations exhibit good conversion for a larger range of flow rates, but they are generally more unstable and less efficient. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000891249700001 | Publication Date | 0000-00-00 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2212-9820 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 7.7 | Times cited | Open Access | Not_Open_Access | |
Notes | This work was supported by the Bulgarian National Science Fund, Ministry of Education and Science, research grant KP-06-OPR 04/4 from 14.12.2018 and by the European Regional Development Fund within the Operational Programme “Science and Education for Smart Growth 2014 – 2020″ under the Project CoE “National center of mechatronics and clean technologies” BG05M2OP001-1.001-0008. | Approved | Most recent IF: 7.7; 2023 IF: 4.292 | ||
Call Number | PLASMANT @ plasmant @c:irua:191816 | Serial | 7117 | ||
Permanent link to this record | |||||
Author | Verheyen, C.; van ’t Veer, K.; Snyders, R.; Bogaerts, A. | ||||
Title | Atomic oxygen assisted CO2 conversion: A theoretical analysis | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of CO2 utilization | Abbreviated Journal | |
Volume | 67 | Issue | Pages | 102347 | |
Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | With climate change still a pressing issue, there is a great need for carbon capture, utilisation and storage (CCUS) methods. We propose a novel concept where CO2 conversion is accomplished by O2 splitting followed by the addition of O atoms to CO2. The latter is studied here by means of kinetic modelling. In the first instance, we study various CO2/O ratios, and we observe an optimal CO2 conversion of around 30–40% for 50% O addition. Gas temperature also has a large influence, with a minimum temperature of around 1000 K to a maximum of 2000 K for optimal conversion. In the second instance, we study various CO2/O/O2 ratios, due to O2 being a starting gas. Also here we define optimal regions for CO2 conversion, which reach maximum conversion for a CO2 fraction of 50% and an O/O2 ratio bigger than 1. Those can be expanded by heating on one hand, for low atomic oxygen availability, and by quenching after reaction on the other hand, for cases where the temperatures are too high. Our model predictions can serve as a guideline for experimental research in this domain. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000908384000005 | Publication Date | 0000-00-00 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2212-9820 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 7.7 | Times cited | Open Access | OpenAccess | |
Notes | This research was supported by FWO – PhD fellowship-aspirant, Grant 1184820N. We also want to thank Bj¨orn Loenders and Joachim Slaets. | Approved | Most recent IF: 7.7; 2023 IF: 4.292 | ||
Call Number | PLASMANT @ plasmant @c:irua:192321 | Serial | 7231 | ||
Permanent link to this record | |||||
Author | Vertongen, R.; Bogaerts, A. | ||||
Title | How important is reactor design for CO2 conversion in warm plasmas? | Type | A1 Journal Article | ||
Year | 2023 | Publication ![]() |
Journal of CO2 Utilization | Abbreviated Journal | |
Volume | 72 | Issue | Pages | 102510 | |
Keywords | A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
Abstract | In this work, we evaluated several new electrode configurations for CO2 conversion in a gliding arc plasmatron (GAP) reactor. Although the reactor design influences the performance, the best results give only slightly higher CO2 conversion than the basic GAP reactor design, which indicates that this reactor may have reached its performance limits. Moreover, we compared our results to those of four completely different plasma reactors, also operating at atmospheric pressure and with contact between the plasma and the electrodes. Surprisingly, the performance of all these warm plasmas is very similar (CO2 conversion around 10 % for an energy efficiency around 30 %). In view of these apparent performance limits regarding the reactor design, we believe further improvements should focus on other aspects, such as the post-plasma-region where the implementation of nozzles or a carbon bed are promising. We summarize the performance of our GAP reactor by comparing the energy efficiency and CO2 conversion for all different plasma reactors reported in literature. We can conclude that the GAP is not the best plasma reactor, but its operation at atmospheric pressure makes it appealing for industrial application. We believe that future efforts should focus on process design, techno-economic assessments and large-scale demonstrations: these will be crucial to assess the real industrial potential of this warm plasma technology |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001024970900001 | Publication Date | 2023-06-16 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2212-9820 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 7.7 | Times cited | Open Access | Not_Open_Access | |
Notes | We acknowledge financial support from the Fund for Scientific Research (FWO) Flanders (Grant ID 110221N) and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreements No 810182 – SCOPE ERC Synergy project and No. 101081162 — “PREPARE” ERC Proof of Concept project). We also thank I. Tsonev, P. Heirman, F. Girard-Sahun and G. Trenchev for the interesting discussions and practical help with the experiments, as well as J. Creel for his ideas on the inserted anode designs. | Approved | Most recent IF: 7.7; 2023 IF: 4.292 | ||
Call Number | PLASMANT @ plasmant @c:irua:197044 | Serial | 8799 | ||
Permanent link to this record | |||||
Author | Kelly, S.; Mercer, E.; De Meyer, R.; Ciocarlan, R.-G.; Bals, S.; Bogaerts, A. | ||||
Title | Microwave plasma-based dry reforming of methane: Reaction performance and carbon formation | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of CO2 utilization | Abbreviated Journal | Journal of CO2 Utilization |
Volume | 75 | Issue | Pages | 102564 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | e investigate atmospheric pressure microwave (MW) plasma (2.45 GHz) conversion in CO2 and CH4 mixtures (i.e., dry reforming of methane, DRM) focusing on reaction performance and carbon formation. Promising energy costs of ~2.8–3.0 eV/molecule or ~11.1–11.9 kJ/L are amongst the best performance to date considering the current state-of-the-art for plasma-based DRM for all types of plasma. The conversion is in the range of ~46–49% and ~55–67% for CO2 and CH4, respectively, producing primarily syngas (i.e., H2 and CO) with H2/CO ratios of ~0.6–1 at CH4 fractions ranging from 30% to 45%. Water is the largest byproduct with levels ranging ~7–14% in the exhaust. Carbon particles visibly impact the plasma at higher CH4 fractions (> 30%), where they become heated and incandescent. Particle luminosity increases with increasing CH4 fractions, with the plasma becoming unstable near a 1:1 mixture (i.e., > 45% CH4). Electron microscopy of the carbon material reveals an agglomerated morphology of pure carbon nanoparticles. The mean particle size is determined as ~20 nm, free of any metal contamination, consistent with the electrode-less MW design. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001065310000001 | Publication Date | 2023-08-10 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2212-9820 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 7.7 | Times cited | 6 | Open Access | OpenAccess |
Notes | We acknowledge financial support by a European Space Agency (ESA) Open Science Innovation Platform study (contract no. 4000137001/21/NL/GLC/ov), the European Marie Skłodowska-Curie Individual Fellowship ‘‘PENFIX’’ within Horizon 2020 (grant no. 838181), the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program (grant no. 810182; SCOPE ERC Synergy project), the Excellence of Science FWOFNRS PLASyntH2 project (FWO grant no. G0I1822N and EOS no. 4000751) and the Methusalem project of the University of Antwerp | Approved | Most recent IF: 7.7; 2023 IF: 4.292 | ||
Call Number | PLASMANT @ plasmant @c:irua:198155 | Serial | 8807 | ||
Permanent link to this record | |||||
Author | Marchetti, A.; Beltran, V.; Storme, P.; Nuyts, G.; Van Der Meeren, L.; Skirtach, A.; Otten, E.; Debulpaep, M.; Watteeuw, L.; De Wael, K. | ||||
Title | All that glitters is not gold : unraveling the material secrets behind the preservation of historical brass | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of cultural heritage | Abbreviated Journal | |
Volume | 63 | Issue | Pages | 179-186 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Art; History; Antwerp Cultural Heritage Sciences (ARCHES); Antwerp Electrochemical and Analytical Sciences Lab (A-Sense Lab) | ||||
Abstract | Brass is a relatively stable alloy but it tends to tarnish over time due to the interaction with the atmosphere. Thus, it is rare to observe centuries-old brass objects untouched by the passing of time. For this reason, the pristine appearance of hundreds of brass sequins in the Enclosed Gardens of Mechelen (reliquary altarpieces produced between 1530 and 1550) is remarkable. In this study, the chemical and metallographic characterization of such unexpectedly well-preserved objects is presented. The results revealed the reason for their stability to be a combination of high-quality materials (i.e. medium Zn content, low impurities) and optimal surface properties (i.e. high homogeneity, low roughness), indicating the high level of expertise of the craftsmen who produced them. Novel fundamental insights on the historical manufacturing method of metallic sequins were also obtained. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001058894000001 | Publication Date | 2023-08-14 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1296-2074 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.1 | Times cited | Open Access | Not_Open_Access: Available from 15.08.2024 | |
Notes | Approved | Most recent IF: 3.1; 2023 IF: 1.838 | |||
Call Number | UA @ admin @ c:irua:198113 | Serial | 8830 | ||
Permanent link to this record | |||||
Author | Loenders, B.; Michiels, R.; Bogaerts, A. | ||||
Title | Is a catalyst always beneficial in plasma catalysis? Insights from the many physical and chemical interactions | Type | A1 Journal Article | ||
Year | 2023 | Publication ![]() |
Journal of Energy Chemistry | Abbreviated Journal | Journal of Energy Chemistry |
Volume | 85 | Issue | Pages | 501-533 | |
Keywords | A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
Abstract | Plasma-catalytic dry reforming of CH4 (DRM) is promising to convert the greenhouse gasses CH4 and CO2 into value-added chemicals, thus simultaneously providing an alternative to fossil resources as feedstock for the chemical industry. However, while many experiments have been dedicated to plasma-catalytic DRM, there is no consensus yet in literature on the optimal choice of catalyst for targeted products, because the underlying mechanisms are far from understood. Indeed, plasma catalysis is very complex, as it encompasses various chemical and physical interactions between plasma and catalyst, which depend on many parameters. This complexity hampers the comparison of experimental results from different studies, which, in our opinion, is an important bottleneck in the further development of this promising research field. Hence, in this perspective paper, we describe the important physical and chemical effects that should be accounted for when designing plasma-catalytic experiments in general, highlighting the need for standardized experimental setups, as well as careful documentation of packing properties and reaction conditions, to further advance this research field. On the other hand, many parameters also create many windows of opportunity for further optimizing plasma-catalytic systems. Finally, various experiments also reveal the lack of improvement in plasma catalysis compared to plasma-only, specifically for DRM, but the underlying mechanisms are unclear. Therefore, we present our newly developed coupled plasma-surface kinetics model for DRM, to provide more insight in the underlying reasons. Our model illustrates that transition metal catalysts can adversely affect plasmacatalytic DRM, if radicals dominate the plasma-catalyst interactions. Thus, we demonstrate that a good understanding of the plasma-catalyst interactions is crucial to avoiding conditions at which these interactions negatively affect the results, and we provide some recommendations for improvement. For instance, we believe that plasma-catalytic DRM may benefit more from higher reaction temperatures, at which vibrational excitation can enhance the surface reactions. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | Publication Date | 2023-06-30 | ||
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2095-4956 | ISBN | Additional Links | UA library record | |
Impact Factor | 13.1 | Times cited | Open Access | Not_Open_Access | |
Notes | This research was supported by the FWO-SBO project PlasMa- CatDESIGN (FWO grant ID S001619N), the FWO fellowship of R. Michiels (FWO grant ID 1114921N), and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No 810182 – SCOPE ERC Synergy project). The computational resources and services used in this work were provided by the HPC core facility CalcUA of the Universiteit Antwerpen, and VSC (Flemish Supercomputer Center), funded by the Research Foundation – Flanders (FWO) and the Flemish Government. | Approved | Most recent IF: 13.1; 2023 IF: 2.594 | ||
Call Number | PLASMANT @ plasmant @c:irua:198159 | Serial | 8806 | ||
Permanent link to this record | |||||
Author | Wanten, B.; Vertongen, R.; De Meyer, R.; Bogaerts, A. | ||||
Title | Plasma-based CO2 conversion: How to correctly analyze the performance? | Type | A1 journal article | ||
Year | 2023 | Publication ![]() |
Journal of Energy Chemistry | Abbreviated Journal | Journal of Energy Chemistry |
Volume | 86 | Issue | Pages | 180-196 | |
Keywords | A1 journal article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001070885000001 | Publication Date | 2023-07-22 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2095-4956 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 13.1 | Times cited | Open Access | Not_Open_Access | |
Notes | We acknowledge financial support from the Fund for Scientific Research (FWO) Flanders (Grant ID 110221N), the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program (grant agreement No 810182 – SCOPE ERC Synergy project), and the Methusalem funding of the University of Antwerp. We acknowledge the icons from the graphical abstract made by dDara, geotatah, Spashicons and Freepik on www.flaticon.com. We also thank Stein Maerivoet, Joachim Slaets, Elizabeth Mercer, Colín Ó’Modráin, Joran Van Turnhout, Pepijn Heirman, dr. Yury Gorbanev, dr. Fanny Girard-Sahun and dr. Sean Kelly for the interesting discussions and feedback. | Approved | Most recent IF: 13.1; 2023 IF: 2.594 | ||
Call Number | PLASMANT @ plasmant @c:irua:198709 | Serial | 8816 | ||
Permanent link to this record | |||||
Author | Salden, A.; Budde, M.; Garcia-Soto, C.A.; Biondo, O.; Barauna, J.; Faedda, M.; Musig, B.; Fromentin, C.; Nguyen-Quang, M.; Philpott, H.; Hasrack, G.; Aceto, D.; Cai, Y.; Jury, F.A.; Bogaerts, A.; Da Costa, P.; Engeln, R.; Galvez, M.E.; Gans, T.; Garcia, T.; Guerra, V.; Henriques, C.; Motak, M.; Navarro, M.V.; Parvulescu, V.I.; Van Rooij, G.; Samojeden, B.; Sobota, A.; Tosi, P.; Tu, X.; Guaitella, O. | ||||
Title | Meta-analysis of CO₂ conversion, energy efficiency, and other performance data of plasma-catalysis reactors with the open access PIONEER database | Type | A1 Journal article | ||
Year | 2023 | Publication ![]() |
Journal of energy chemistry | Abbreviated Journal | |
Volume | 86 | Issue | Pages | 318-342 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | This paper brings the comparison of performances of CO2 conversion by plasma and plasma-assisted catalysis based on the data collected from literature in this field, organised in an open access online data-base. This tool is open to all users to carry out their own analyses, but also to contributors who wish to add their data to the database in order to improve the relevance of the comparisons made, and ultimately to improve the efficiency of CO2 conversion by plasma-catalysis. The creation of this database and data-base user interface is motivated by the fact that plasma-catalysis is a fast-growing field for all CO2 con-version processes, be it methanation, dry reforming of methane, methanolisation, or others. As a result of this rapid increase, there is a need for a set of standard procedures to rigorously compare performances of different systems. However, this is currently not possible because the fundamental mechanisms of plasma-catalysis are still too poorly understood to define these standard procedures. Fortunately how-ever, the accumulated data within the CO2 plasma-catalysis community has become large enough to war-rant so-called “big data” studies more familiar in the fields of medicine and the social sciences. To enable comparisons between multiple data sets and make future research more effective, this work proposes the first database on CO2 conversion performances by plasma-catalysis open to the whole community. This database has been initiated in the framework of a H2020 European project and is called the “PIONEER DataBase”. The database gathers a large amount of CO2 conversion performance data such as conversion rate, energy efficiency, and selectivity for numerous plasma sources coupled with or without a catalyst. Each data set is associated with metadata describing the gas mixture, the plasma source, the nature of the catalyst, and the form of coupling with the plasma. Beyond the database itself, a data extraction tool with direct visualisation features or advanced filtering functionalities has been developed and is available online to the public. The simple and fast visualisation of the state of the art puts new results into context, identifies literal gaps in data, and consequently points towards promising research routes. More advanced data extraction illustrates the impact that the database can have in the understanding of plasma-catalyst coupling. Lessons learned from the review of a large amount of literature during the setup of the database lead to best practice advice to increase comparability between future CO2 plasma-catalytic studies. Finally, the community is strongly encouraged to contribute to the database not only to increase the visibility of their data but also the relevance of the comparisons allowed by this tool. (c) 2023 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. This is an open access article under the CC BY license (http://creati- vecommons.org/licenses/by/4.0/). | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001083545900001 | Publication Date | 2023-08-10 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2095-4956 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 13.1 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 13.1; 2023 IF: 2.594 | |||
Call Number | UA @ admin @ c:irua:200416 | Serial | 9056 | ||
Permanent link to this record |