NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	421–450 of 502 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 >>

List View

Citations

Details

	Records
	Author	Leca, V.; Blank, D.H.A.; Rijnders, G.; Bals, S.; Van Tendeloo, G.
	Title	Superconducting single-phase Sr_1-xLa_xCuO₂ thin films with improved crystallinity grown by pulsed laser deposition			Type	A1 Journal article
	Year	2006	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	89	Issue	9	Pages
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Sr1-xLaxCuO2-delta (x=0.10-0.20) thin films exhibiting an oxygen-deficient 2 root 2a(p)x2 root a(p) x c structure (a(p) and c represent the cell parameters of the perovskite subcell) were epitaxially grown by means of pulsed laser deposition in low-pressure oxygen ambient. (001) KTaO3 and (001) SrTiO3 single crystals were used as substrates, with BaTiO3 as buffer layer. The Sr1-xLaxCuO2-delta films were oxidized during cooling down in order to yield the infinite-layer-type structure. By applying this method, high quality single-phase Sr1-xLaxCuO2 thin films could be obtained for 0.10 <= x <= 0.175 doping range. The films grown on BaTiO3/KTaO3 show superconductivity for 0.15 <= x <= 0.175 with optimum doping at x=0.15, in contrast with previously reported data. (c) 2006 American Institute of Physics.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000240236600077	Publication Date	2006-08-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	32	Open Access
	Notes	Fom; Fwo			Approved	Most recent IF: 3.411; 2006 IF: 3.977
	Call Number	UA @ lucian @ c:irua:60817			Serial	3366
Permanent link to this record



	Author	Bals, S.; Van Tendeloo, G.; Rijnders, G.; Huijben, M.; Leca, V.; Blank, D.H.A.
	Title	Transmission electron microscopy on interface engineered superconducting thin films			Type	A1 Journal article
	Year	2003	Publication	IEEE transactions on applied superconductivity	Abbreviated Journal	Ieee T Appl Supercon
	Volume	13	Issue	2:3	Pages	2834-2837
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Transmission electron microscopy is used to evaluate different deposition techniques, which optimize the microstructure and physical properties of superconducting thin films. High-resolution electron microscopy proves that the use of an YBa2Cu2Ox buffer layer can avoid a variable interface configuration in YBa2Cu3O7-delta thin films grown on SrTiO3. The growth can also be controlled at an atomic level by, using sub-unit cell layer epitaxy, which results in films with high quality and few structural defects. Epitaxial strain in Sr0.85La0.15CuO2 infinite layer thin films influences the critical temperature of these films, as well as the microstructure. Compressive stress is released by a modulated or a twinned microstructure, which eliminates superconductivity. On the other hand, also tensile strain seems to lower the critical temperature of the infinite layer.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000184242400101	Publication Date	2003-07-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1051-8223;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	13	Open Access
	Notes	Iuap V-1; Fwo			Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:103292			Serial	3712
Permanent link to this record



	Author	Bals, S.; Van Tendeloo, G.; Salluzzo, M.; Maggio-Aprile, I.
	Title	Why are sputter deposited Nd_1+xBa_2-xCu₃O_7-\delta thin films flatter than NdBa₂Cu₃O_7-\delta films?			Type	A1 Journal article
	Year	2001	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	79	Issue	22	Pages	3660-3662
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	High-resolution electron microscopy and scanning tunneling microscopy have been used to compare the microstructure of NdBa2Cu3O7-delta and Nd1+xBa2-xCu3O7-delta thin films. Both films contain comparable amounts of Nd2CuO4 inclusions. Antiphase boundaries are induced by unit cell high steps at the substrate or by a different interface stacking. In Nd1+xBa2-xCu3O7-delta the antiphase boundaries tend to annihilate by the insertion of extra Nd layers. Stacking faults, which can be characterized as local Nd2Ba2Cu4O9 inclusions, also absorb the excess Nd. A correlation is made between the excess Nd and the absence of growth spirals at the surface of the Nd-rich films. (C) 2001 American Institute of Physics.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000172204400034	Publication Date	2002-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	13	Open Access
	Notes				Approved	Most recent IF: 3.411; 2001 IF: 3.849
	Call Number	UA @ lucian @ c:irua:54801			Serial	3916
Permanent link to this record



	Author	Geenen, F.A.; van Stiphout, K.; Nanakoudis, A.; Bals, S.; Vantomme, A.; Jordan-Sweet, J.; Lavoie, C.; Detavernier, C.
	Title	Controlling the formation and stability of ultra-thin nickel silicides : an alloying strategy for preventing agglomeration			Type	A1 Journal article
	Year	2018	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	123	Issue	123	Pages	075303
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The electrical contact of the source and drain regions in state-of-the-art CMOS transistors is nowadays facilitated through NiSi, which is often alloyed with Pt in order to avoid morphological agglomeration of the silicide film. However, the solid-state reaction between as-deposited Ni and the Si substrate exhibits a peculiar change for as-deposited Ni films thinner than a critical thickness of t(c) = 5 nm. Whereas thicker films form polycrystalline NiSi upon annealing above 450 degrees C, thinner films form epitaxial NiSi2 films that exhibit a high resistance toward agglomeration. For industrial applications, it is therefore of utmost importance to assess the critical thickness with high certainty and find novel methodologies to either increase or decrease its value, depending on the aimed silicide formation. This paper investigates Ni films between 0 and 15 nm initial thickness by use of “thickness gradients,” which provide semi-continuous information on silicide formation and stability as a function of as-deposited layer thickness. The alloying of these Ni layers with 10% Al, Co, Ge, Pd, or Pt renders a significant change in the phase sequence as a function of thickness and dependent on the alloying element. The addition of these ternary impurities therefore changes the critical thickness t(c). The results are discussed in the framework of classical nucleation theory. Published by AIP Publishing.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000425807400018	Publication Date	2018-02-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979; 1089-7550	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	23	Open Access	OpenAccess
	Notes	; The authors acknowledge the FWO Vlaanderen, the Hercules Foundation, and BOF-UGent (GOA 01G01513) for providing financial support for this work. This research used resources of the National Synchrotron Light Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-AC02-98CH10886. ;			Approved	Most recent IF: 2.068
	Call Number	UA @ lucian @ c:irua:149912UA @ admin @ c:irua:149912			Serial	4929
Permanent link to this record



	Author	He, Z.; Ke, X.; Bals, S.; Van Tendeloo, G.
	Title	Direct evidence for the existence of multi-walled carbon nanotubes with hexagonal cross-sections			Type	A1 Journal article
	Year	2012	Publication	Carbon	Abbreviated Journal	Carbon
	Volume	50	Issue	7	Pages	2524-2529
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Carbon nanotubes (CNTs) with a polygonal cross-section have been paid increasing attention since their three-dimensional structure is related to specific physical properties, which are found to be different in comparison to CNTs with a circular cross-section. Here, we report the existence of novel multi-walled CNTs yielding walls with a rounded-hexagonal configuration. This structure was directly confirmed for the first time by both cross-sectional transmission electron microscopy and electron tomography. The morphology of the Fe catalytic particle also exhibits hexagonal characteristics, and is proposed as the origin of the formation of the rounded-hexagonal walls of the CNT. This observation is of great importance with respect to the design of polygonal (such as pentagonal or hexagonal) cross-sectional CNTs. By controlling the morphology of the catalytic nanoparticles it will be possible to grow CNTs with desired electronic and mechanical properties.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000303038400015	Publication Date	2012-02-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0008-6223;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.337	Times cited	8	Open Access
	Notes	Fwo			Approved	Most recent IF: 6.337; 2012 IF: 5.868
	Call Number	UA @ lucian @ c:irua:96956			Serial	711
Permanent link to this record



	Author	Pasquini, L.; Sacchi, M.; Brighi, M.; Boelsma, C.; Bals, S.; Perkisas, T.; Dam, B.
	Title	Hydride destabilization in core-shell nanoparticles			Type	A1 Journal article
	Year	2014	Publication	International journal of hydrogen energy	Abbreviated Journal	Int J Hydrogen Energ
	Volume	39	Issue	5	Pages	2115-2123
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	We present a model that describes the effect of elastic constraint on the thermodynamics of hydrogen absorption and desorption in biphasic core-shell nanoparticles, where the core is a hydride forming metal. In particular, the change of the hydride formation enthalpy and of the equilibrium pressure for the metal/hydride transformation are described as a function of nanoparticles radius, shell thickness, and elastic properties of both core and shell. To test the model, the hydrogen sorption isotherms of Mg-MgO core-shell nanoparticles, synthesized by inert gas condensation, were measured by means of optical hydrogenography. The model's predictions are in good agreement with the experimentally determined plateau pressure of hydrogen absorption. The features that a core-shell systems should exhibit in view of practical hydrogen storage applications are discussed with reference to the model and the experimental results. Copyright (C) 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000331344800022	Publication Date	2014-01-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0360-3199;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.582	Times cited	32	Open Access	Not_Open_Access
	Notes	COST Action MP1103			Approved	Most recent IF: 3.582; 2014 IF: 3.313
	Call Number	UA @ lucian @ c:irua:115785			Serial	1528
Permanent link to this record



	Author	Montoya, E.; Bals, S.; Van Tendeloo, G.
	Title	Redeposition and differential sputtering of La in transmission electron microscopy samples of LaAIO₃/SrTiO₃ multilayers prepared by focused ion beam			Type	A1 Journal article
	Year	2008	Publication	Journal of microscopy	Abbreviated Journal	J Microsc-Oxford
	Volume	231	Issue	3	Pages	359-363
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000259611000001	Publication Date	2008-08-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-2720;1365-2818;	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	1.692	Times cited		Open Access
	Notes	The authors are grateful to M. Huijben and G. Rijnders of the MESA+ group at the University of Twente (NI) for the growth of the multilayers. This work has been performed under the Interuniversity Attraction Poles programme – Belgian State Belgian Science Policy. The authors acknowledge financial support from the European Union under the framework 6 program under a contract for an Integrated Infrastructure initiative. Part of this work was performed with financial support from the European Union under the framework 6 programme, under a contract for an Integrated Infrastructure Initiative (Reference No. 02601.9 ESTEEM).			Approved	Most recent IF: 1.692; 2008 IF: 1.409
	Call Number	UA @ lucian @ c:irua:76522			Serial	2849
Permanent link to this record



	Author	Mooij, L.; Perkisas, T.; Palsson, G.; Schreuders, H.; Wolff, M.; Hjorvarsson, B.; Bals, S.; Dam, B.
	Title	The effect of microstructure on the hydrogenation of Mg/Fe thin film multilayers			Type	A1 Journal article
	Year	2014	Publication	International journal of hydrogen energy	Abbreviated Journal	Int J Hydrogen Energ
	Volume	39	Issue	30	Pages	17092-17103
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Nanoconfined magnesium hydride can be simultaneously protected and thermodynamically destabilized when interfaced with materials such as Ti and Fe. We study the hydrogenation of thin layers of Mg (<14 nm) nanoconfined in one dimension within thin film Fe/Mg/Fe/Pd multilayers by the optical technique Hydrogenography. The hydrogenation of nanosized magnesium layers in Fe/Mg/Fe multilayers surprisingly shows the presence of multiple plateau pressures, whose nature is thickness dependent. In contrast, hydrogen desorption occurs via a single plateau which does not depend on the Mg layer thickness. From structural and morphological analyses with X-ray diffraction/reflectometry and cross-section TEM, we find that the Mg layer roughness is large when deposited on Fe and furthermore contains high-angle grain boundaries (GB's). When grown on Ti, the Mg layer roughness is low and no high-angle GB's are detected. From a Ti/Mg/Fe multilayer, in which the Mg layer is flat and has little or no GB's, we conclude that MgH2 is indeed destabilized by the interface with Fe. In this case, both the ab- and desorption plateau pressures are increased by a factor two compared to the hydrogenation of Mg within Ti/Mg/Ti multilayers. We hypothesize that the GB's in the Fe/Mg/Fe multilayer act as diffusion pathways for Pd, which is known to greatly alter the hydrogenation behavior of Mg when the two materials share an interface. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000343839000031	Publication Date	2014-09-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0360-3199;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.582	Times cited	15	Open Access	Not_Open_Access
	Notes	COST Action MP1103			Approved	Most recent IF: 3.582; 2014 IF: 3.313
	Call Number	UA @ lucian @ c:irua:121175			Serial	3575
Permanent link to this record



	Author	Leroux, O.; Leroux, F.; Bagniewska-Zadworna,.; Knox, J.P.; Claeys, M.; Bals, S.; Viane, R.L.L.
	Title	Ultrastructure and composition of cell wall appositions in the roots of Asplenium (Polypodiales)			Type	A1 Journal article
	Year	2011	Publication	Micron	Abbreviated Journal	Micron
	Volume	42	Issue	8	Pages	863-870
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Cell wall appositions (CWAs), formed by the deposition of extra wall material at the contact site with microbial organisms, are an integral part of the response of plants to microbial challenge. Detailed histological studies of CWAs in fern roots do not exist. Using light and electron microscopy we examined the (ultra)structure of CWAs in the outer layers of roots of Asplenium species. All cell walls studded with CWAs were impregnated with yellow-brown pigments. CWAs had different shapes, ranging from warts to elongated branched structures, as observed with scanning and transmission electron microscopy. Ultrastructural study further showed that infecting fungi grow intramurally and that they are immobilized by CWAs when attempting to penetrate intracellularly. Immunolabelling experiments using monoclonal antibodies indicated pectic homogalacturonan, xyloglucan, mannan and cellulose in the CWAs, but tests for lignins and callose were negative. We conclude that these appositions are defense-related structures made of a non-lignified polysaccharide matrix on which phenolic compounds are deposited in order to create a barrier protecting the root against infections.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000294942600013	Publication Date	2011-06-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0968-4328;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.98	Times cited	20	Open Access
	Notes	Fwo			Approved	Most recent IF: 1.98; 2011 IF: 1.527
	Call Number	UA @ lucian @ c:irua:92540			Serial	3798
Permanent link to this record



	Author	Adam, N.; Leroux, F.; Knapen, D.; Bals, S.; Blust, R.
	Title	The uptake and elimination of ZnO and CuO nanoparticles in Daphnia magna under chronic exposure scenarios			Type	A1 Journal article
	Year	2015	Publication	Water research	Abbreviated Journal	Water Res
	Volume	68	Issue	68	Pages	249-261
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Veterinary physiology and biochemistry
	Abstract	In this study, the uptake and elimination of ZnO and CuO nanoparticles in Daphnia magna was tested. Daphnids were exposed during 10 days to sublethal concentrations of ZnO and CuO nanoparticles and corresponding metal salts (ZnCl2 and CuCl2.2H2O), after which they were transferred to unexposed medium for another 10 days. At different times during the exposure and none-exposure, the total and internal zinc or copper concentration of the daphnids was determined and the nanoparticles were localized in the organism using electron microscopy. The exposure concentrations were characterized by measuring the dissolved, nanoparticle and aggregated fraction in the medium. The results showed that the ZnO nanoparticles quickly dissolved after addition to the medium. Contrarily, only a small fraction (corresponding to the dissolved metal salt) of the CuO nanoparticles dissolved, while most of these nanoparticles formed large aggregates. Despite an initial increase in zinc and copper concentration during the first 48 hour to 5 day exposure, the body concentration reached a plateau level that was comparable for the ZnO nanoparticles and ZnCl2, but much higher for the CuO nanoparticles (with visible aggregates accumulating in the gut) than CuCl2.2H2O. During the remaining exposure and subsequent none-exposure phase, the zinc and copper concentration decreased fast to concentrations comparable with the unexposed daphnids. The results indicate that D. magna can regulate its internal zinc and copper concentration after exposure to ZnO and CuO nanoparticles, similar as after exposure to metal salts. The combined dissolution, accumulation and toxicity results confirm that the toxicity of ZnO and CuO nanoparticles is caused by the dissolved fraction. Keywords nano; zinc; copper; dissolution; aggregation; electron microscopy
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000347756900022	Publication Date	2014-10-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0043-1354;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.942	Times cited	51	Open Access	OpenAccess
	Notes	; The authors would like to thank Valentine Mubiana and Steven Joosen (Sphere, UA) for performing the ICP-MS and ICP-OES measurements and Prof. Dr. Gustaaf Van Tendeloo for making the collaboration between the EMAT and Sphere group possible. This study is part of the ENNSATOX-project, which was funded by the EU (NMP4-SL-2009-229244). The authors report no conflicts of interest. ;			Approved	Most recent IF: 6.942; 2015 IF: 5.528
	Call Number	c:irua:119366 c:irua:119366			Serial	3822
Permanent link to this record



	Author	Callini, E.; Aguey-Zinsou, K.F.; Ahuja, R.; Ares, J.R.; Bals, S.; Biliškov, N.; Chakraborty, S.; Charalambopoulou, G.; Chaudhary, A.L.; Cuevas, F.; Dam, B.; de Jongh, P.; Dornheim, M.; Filinchuk, Y.; Grbović Novaković, J.; Hirscher, M.; Jensen, T.R.; Jensen, P.B.; Novaković, N.; Lai, Q.; Leardini, F.; Gattia, D.M.; Pasquini, L.; Steriotis, T.; Turner, S.; Vegge, T.; Züttel, A.; Montone, A.
	Title	Nanostructured materials for solid-state hydrogen storage : a review of the achievement of COST Action MP1103			Type	A1 Journal article
	Year	2016	Publication	International journal of hydrogen energy T2 – E-MRS Fall Meeting / Symposium C on Hydrogen Storage in Solids -, Materials, Systems and Aplication Trends, SEP 15-18, 2015, Warsaw, POLAND	Abbreviated Journal	Int J Hydrogen Energ
	Volume	41	Issue	41	Pages	14404-14428
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	In the framework of the European Cooperation in Science and Technology (COST) Action MP1103 Nanostructured Materials for Solid-State Hydrogen Storage were synthesized, characterized and modeled. This Action dealt with the state of the art of energy storage and set up a competitive and coordinated network capable to define new and unexplored ways for Solid State Hydrogen Storage by innovative and interdisciplinary research within the European Research Area. An important number of new compounds have been synthesized: metal hydrides, complex hydrides, metal halide ammines and amidoboranes. Tuning the structure from bulk to thin film, nanoparticles and nanoconfined composites improved the hydrogen sorption properties and opened the perspective to new technological applications. Direct imaging of the hydrogenation reactions and in situ measurements under operando conditions have been carried out in these studies. Computational screening methods allowed the prediction of suitable compounds for hydrogen storage and the modeling of the hydrogen sorption reactions on mono-, bi-, and three-dimensional systems. This manuscript presents a review of the main achievements of this Action. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher	Pergamon-elsevier science ltd	Place of Publication	Oxford	Editor
	Language		Wos	000381950800051	Publication Date	2016-05-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0360-3199	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.582	Times cited	89	Open Access	Not_Open_Access
	Notes	All the authors greatly thank the COST Action MP1103 for financial support.			Approved	Most recent IF: 3.582
	Call Number	UA @ lucian @ c:irua:135723			Serial	4307
Permanent link to this record



	Author	Bals, S.; Goris, B.; Altantzis, T.; Heidari, H.; Van Aert, S.; Van Tendeloo, G.
	Title	Seeing and measuring in 3D with electrons			Type	A1 Journal article
	Year	2014	Publication	Comptes rendus : physique	Abbreviated Journal	Cr Phys
	Volume	15	Issue	2-3	Pages	140-150
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Modern TEM enables the investigation of nanostructures at the atomic scale. However, TEM images are only two-dimensional (2D) projections of a three-dimensional (3D) object. Electron tomography can overcome this limitation. The technique is increasingly focused towards quantitative measurements and reaching atomic resolution in 3D has been the ultimate goal for many years. Therefore, one needs to optimize the acquisition of the data, the 3D reconstruction techniques as well as the quantification methods. Here, we will review a broad range of methodologies and examples. Finally, we will provide an outlook and will describe future challenges in the field of electron tomography.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Paris	Editor
	Language		Wos	000334013600005	Publication Date	2014-01-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1631-0705;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.048	Times cited	15	Open Access	OpenAccess
	Notes	(FWO;Belgium); European Research Council under the 7th Framework Program (FP7); ERC grant No.246791 – COUNTATOMS; ERC grant No.335078 – COLOURATOMS; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot);			Approved	Most recent IF: 2.048; 2014 IF: 2.035
	Call Number	UA @ lucian @ c:irua:113855			Serial	2960
Permanent link to this record



	Author	Bals, S.; Goris, B.; de Backer, A.; Van Aert, S.; Van Tendeloo, G.
	Title	Atomic resolution electron tomography			Type	A1 Journal article
	Year	2016	Publication	MRS bulletin	Abbreviated Journal	Mrs Bull
	Volume	41	Issue	41	Pages	525-530
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Over the last two decades, three-dimensional (3D) imaging by transmission electron microscopy or “electron tomography” has evolved into a powerful tool to investigate a variety of nanomaterials in different fields, such as life sciences, chemistry, solid-state physics, and materials science. Most of these results were obtained with nanometer-scale resolution, but different approaches have recently pushed the resolution to the atomic level. Such information is a prerequisite to understand the specific relationship between the atomic structure and the physicochemical properties of (nano) materials. We provide an overview of the latest progress in the field of atomic-resolution electron tomography. Different imaging and reconstruction approaches are presented, and state-of-the-art results are discussed. This article demonstrates the power and importance of electron tomography with atomic-scale resolution.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Pittsburgh, Pa	Editor
	Language		Wos	000382508100012	Publication Date	2016-07-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0883-7694	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.199	Times cited	19	Open Access	OpenAccess
	Notes	; The authors gratefully acknowledge funding from the Research Foundation Flanders (G.0381.16N, G.036915, G.0374.13, and funding of postdoctoral grants to B.G. and A.D.B.). S.B. acknowledges the European Research Council, ERC Grant Number 335078-Colouratom. The research leading to these results received funding from the European Union Seventh Framework Program under Grant Agreements 312483 (ESTEEM2). The authors would like to thank the colleagues who have contributed to this work, including K.J. Batenburg, J. De Beenhouwer, R. Erni, M.D. Rossell, W. Van den Broek, L. Liz-Marzan, E. Carbo-Argibay, S. Gomez-Grana, P. Lievens, M. Van Bael, B. Partoens, B. Schoeters, and J. Sijbers. ; ecas_sara			Approved	Most recent IF: 5.199
	Call Number	UA @ lucian @ c:irua:135690			Serial	4299
Permanent link to this record



	Author	Ben Dkhil, S.; Pfannmöller, M.; Bals, S.; Koganezawa, T.; Yoshimoto, N.; Hannani, D.; Gaceur, M.; Videlot-Ackermann, C.; Margeat, O.; Ackermann, J.
	Title	Square-centimeter-sized high-efficiency polymer solar cells : how the processing atmosphere and film quality influence performance at large scale			Type	A1 Journal article
	Year	2016	Publication	Laser physics review	Abbreviated Journal	Adv Energy Mater
	Volume	6	Issue	6	Pages	1600290
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Organic solar cells based on two benzodithiophene-based polymers (PTB7 and PTB7-Th) processed at square centimeter-size under inert atmosphere and ambient air, respectively, are investigated. It is demonstrated that the performance of solar cells processed under inert atmosphere is not limited by the upscaling of photoactive layer and the interfacial layers. Thorough morphological and electrical characterizations of optimized layers and corresponding devices reveal that performance losses due to area enlargement are only caused by the sheet resistance of the transparent electrode reducing the effi ciency from 9.3% of 7.8% for PTB7-Th in the condition that both photoactive layer and the interfacial layers are of high layer quality. Air processing of photoactive layer and the interfacial layers into centimeter-sized solar cells lead to additional, but only slight, losses (< 10%) in all photovoltaic parameters, which can be addressed to changes in the electronic properties of both active layer and ZnO layers rather than changes in layer morphology. The demonstrated compatibility of polymer solar cells using solution-processed photoactive layer and interfacial layers with large area indicates that the introduction of a standard active area of 1 cm(2) for measuring effi ciency of organic record solar cells is feasible. However electric standards for indium tin oxides (ITO) or alternative transparent electrodes need to be developed so that performance of new photovoltaic materials can be compared at square centimeter-size.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Place of publication unknown	Editor
	Language		Wos	000379314700010	Publication Date	2016-05-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1614-6832	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	16.721	Times cited	6	Open Access	Not_Open_Access
	Notes	; The authors acknowledge financial support by the French Fond Unique Intermisteriel (FUI) under the project “SFUMATO” (Grant number: F1110019V/ 201308815) as well as by the European Commission under the Project “SUNFLOWER” (FP7-ICT-2011-7-contract no. 287594). Generalitat Valenciana (ISIC/2012/008 Institute of Nanotechnologies for Clean Energies) is also acknowledged for providing financial support. The synchrotron radiation experiments were performed at BL46XU and BL19B2 in SPring-8 with the approval of Japan Synchrotron Radiation Research Institute (JASRI) (Proposal Nos. 2014B1916 and 2015A1984). The authors further acknowledge financial support from the European Research Council (ERC Starting Grant #335078-COLOURATOMS). ;			Approved	Most recent IF: 16.721
	Call Number	UA @ lucian @ c:irua:134951			Serial	4249
Permanent link to this record



	Author	Ben Dkhil, S.; Pfannmöller, M.; Saba, M.I.; Gaceur, M.; Heidari, H.; Videlot-Ackermann, C.; Margeat, O.; Guerrero, A.; Bisquert, J.; Garcia-Belmonte, G.; Mattoni, A.; Bals, S.; Ackermann, J.
	Title	Toward high-temperature stability of PTB7-based bulk heterojunction solar cells : impact of fullerene size and solvent additive			Type	A1 Journal article
	Year	2017	Publication	Laser physics review	Abbreviated Journal	Adv Energy Mater
	Volume	7	Issue	7	Pages	1601486
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The use of fullerene as acceptor limits the thermal stability of organic solar cells at high temperatures as their diffusion inside the donor leads to phase separation via Ostwald ripening. Here it is reported that fullerene diffusion is fully suppressed at temperatures up to 140 degrees C in bulk heterojunctions based on the benzodithiophene-based polymer (the poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b: 4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl) carbonyl]thieno[3,4-b]thiophenediyl]], (PTB7) in combination with the fullerene derivative [6,6]-phenyl-C71-butyric acid methyl ester (PC70BM). The blend stability is found independently of the presence of diiodooctane (DIO) used to optimize nanostructuration and in contrast to PTB7 blends using the smaller fullerene derivative PC70BM. The unprecedented thermal stability of PTB7: PC70BM layers is addressed to local minima in the mixing enthalpy of the blend forming stable phases that inhibit fullerene diffusion. Importantly, although the nanoscale morphology of DIO processed blends is thermally stable, corresponding devices show strong performance losses under thermal stress. Only by the use of a high temperature annealing step removing residual DIO from the device, remarkably stable high efficiency solar cells with performance losses less than 10% after a continuous annealing at 140 degrees C over 3 days are obtained. These results pave the way toward high temperature stable polymer solar cells using fullerene acceptors.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Place of publication unknown	Editor
	Language		Wos	000396328500009	Publication Date	2016-11-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1614-6832;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	16.721	Times cited	27	Open Access	Not_Open_Access
	Notes	; The authors acknowledge financial support by the French Fond Unique Interministeriel (FUI) under the project “SFUMATO” (grant number: F1110019V/ 201308815) as well as by the European Commission under the Project “SUNFLOWER” (FP7-ICT-2011-7, grant number: 287594). Generalitat Valenciana (ISIC/2012/008 Institute of Nanotechnologies for Clean Energies) is also acknowledged for providing financial support. The authors further acknowledge financial support via ERC Starting Grant Colouratoms (335078). ;			Approved	Most recent IF: 16.721
	Call Number	UA @ lucian @ c:irua:141991UA @ admin @ c:irua:141991			Serial	4697
Permanent link to this record



	Author	Turner, S.; Tavernier, S.M.F.; Huyberechts, G.; Bals, S.; Batenburg, K.J.; Van Tendeloo, G.
	Title	Assisted spray pyrolysis production and characterisation of ZnO nanoparticles with narrow size distribution			Type	A1 Journal article
	Year	2010	Publication	Journal of nanoparticle research	Abbreviated Journal	J Nanopart Res
	Volume	12	Issue	2	Pages	615-622
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Nano-sized ZnO particles with a narrow size distribution and high crystallinity were prepared from aqueous solutions with high concentrations of Zn2+ containing salts and citric acid in a conventional spray pyrolysis setup. Structure, morphology and size of the produced material were compared to ZnO material produced by simple spray pyrolysis of zinc nitrates in the same experimental setup. Using transmission electron microscopy and electron tomography it has been shown that citric acid-assisted spray pyrolysed material is made up of micron sized secondary particles comprising a shell of lightly agglomerated, monocrystalline primary ZnO nanoparticles with sizes in the 2030 nm range, separable by a simple ultrasonic treatment step.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	S.l.	Editor
	Language		Wos	000275318700025	Publication Date	2009-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1388-0764;1572-896X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.02	Times cited	27	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 2.02; 2010 IF: 3.253
	Call Number	UA @ lucian @ c:irua:81771			Serial	156
Permanent link to this record



	Author	Roose, D.; Leroux, F.; de Vocht, N.; Guglielmetti, C.; Pintelon, I.; Adriaensen, D.; Ponsaerts, P.; van der Linden, A.-M.; Bals, S.
	Title	Multimodal imaging of micron-sized iron oxide particles following in vitro and in vivo uptake by stem cells: down to the nanometer scale			Type	A1 Journal article
	Year	2014	Publication	Contrast media and molecular imaging	Abbreviated Journal	Contrast Media Mol I
	Volume	9	Issue	6	Pages	400-408
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Bio-Imaging lab
	Abstract	In this study, the interaction between cells and micron-sized paramagnetic iron oxide (MPIO) particles was investigated by characterizing MPIO in their original state, and after cellular uptake in vitro as well as in vivo. Moreover, MPIO in the olfactory bulb were studied 9months after injection. Using various imaging techniques, cell-MPIO interactions were investigated with increasing spatial resolution. Live cell confocal microscopy demonstrated that MPIO co-localize with lysosomes after in vitro cellular uptake. In more detail, a membrane surrounding the MPIO was observed by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Following MPIO uptake in vivo, the same cell-MPIO interaction was observed by HAADF-STEM in the subventricular zone at 1week and in the olfactory bulb at 9months after MPIO injection. These findings provide proof for the current hypothesis that MPIO are internalized by the cell through endocytosis. The results also show MPIO are not biodegradable, even after 9months in the brain. Moreover, they show the possibility of HAADF-STEM generating information on the labeled cell as well as on the MPIO. In summary, the methodology presented here provides a systematic route to investigate the interaction between cells and nanoparticles from the micrometer level down to the nanometer level and beyond. Copyright (c) 2014 John Wiley Sons, Ltd.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	S.l.	Editor
	Language		Wos	000346172100001	Publication Date	2014-04-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1555-4309;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.307	Times cited	5	Open Access	Not_Open_Access
	Notes	; The authors would like to thank Sofie Thys for her technical support. The UltraVIEW VoX spinning disk confocal microscope was purchased with support of the Hercules Foundation (Hercules Type 1: AUHA 09/001 and AUHA 11/01). The authors also appreciate financial support from the European Union under the Seventh Framework Program (Integrated Infrastructure Initiative no. 262348 European Soft Matter Infrastructure, ESMI), the Fund for Scientific Research- Flanders and the Flemish Institute for Science and Technology and the Belgian government through the Interuniversity Attraction Pole Program (IAP- PAI). ;			Approved	Most recent IF: 3.307; 2014 IF: 2.923
	Call Number	UA @ lucian @ c:irua:122750			Serial	2222
Permanent link to this record



	Author	Van Eyndhoven, G.; Batenburg, K.J.; van Oers, C.; Kurttepeli, M.; Bals, S.; Cool, P.; Sijbers, J.
	Title	Reliable pore-size measurements based on a procedure specifically designed for electron tomography measurements of nanoporous samples			Type	P3 Proceeding
	Year	2014	Publication		Abbreviated Journal
	Volume		Issue		Pages
	Keywords	P3 Proceeding; Electron microscopy for materials research (EMAT); Vision lab; Laboratory of adsorption and catalysis (LADCA)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	S.l.	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:124548			Serial	2866
Permanent link to this record



	Author	Guerrero, A.; Heidari, H.; Ripolles, T.S.; Kovalenko, A.; Pfannmöller, M.; Bals, S.; Kauffmann, L.-D.; Bisquert, J.; Garcia-Belmonte, G.
	Title	Shelf life degradation of bulk heterojunction solar cells : intrinsic evolution of charge transfer complex			Type	A1 Journal article
	Year	2015	Publication	Laser physics review	Abbreviated Journal	Adv Energy Mater
	Volume	5	Issue	5	Pages	1401997
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Achievement of long-term stability of organic photovoltaics is currently one of the major topics for this technology to reach maturity. Most of the techniques used to reveal degradation pathways are destructive and/or do not allow for real-time measurements in operating devices. Here, three different, nondestructive techniques able to provide real-time information, namely, film absorbance, capacitance-voltage (C-V), and impedance spectroscopy (IS), are combined over a period of 1 year using non-accelerated intrinsic degradation conditions. It is discerned between chemical modifications in the active layer, physical processes taking place in the bulk of the blend from those at the active layer/contact interfaces. In particular, it is observed that during the ageing experiment, the main source for device performance degradation is the formation of donor-acceptor charge-transfer complex (P3HT(center dot+)-PCBM center dot-) that acts as an exciton quencher. Generation of these radical species diminishes photocurrent and reduces open-circuit voltage by the creation of electronic defect states. Conclusions extracted from absorption, C-V, and IS measurements will be further supported by a range of other techniques such as atomic force microscopy, X-ray diffraction, and dark-field imaging of scanning transmission electron microscopy on ultrathin cross-sections.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	S.l.	Editor
	Language		Wos	000352708600013	Publication Date	2014-12-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1614-6832;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	16.721	Times cited	30	Open Access	OpenAccess
	Notes	287594 Sunflower; 335078 Colouratom; ECAS_Sara; (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:cannot);			Approved	Most recent IF: 16.721; 2015 IF: 16.146
	Call Number	c:irua:126000			Serial	2994
Permanent link to this record



	Author	Verheyen, E.; Jo, C.; Kurttepeli, M.; Vanbutsele, G.; Gobechiya, E.; Korányi, T.I.; Bals, S.; Van Tendeloo, G.; Ryoo, R.; Kirschhock, C.E.A.; Martens, J.A.;
	Title	Molecular shape-selectivity of MFI zeolite nanosheets in n-decane isomerization and hydrocracking			Type	A1 Journal article
	Year	2013	Publication	Journal of catalysis	Abbreviated Journal	J Catal
	Volume	300	Issue		Pages	70-80
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	MFI zeolite nanosheets with thickness of 2 and 8 nm were synthesized, transformed into bifunctional catalysts by loading with platinum and tested in n-decane isomerization and hydrocracking. Detailed analysis of skeletal isomers and hydrocracked products revealed that the MFI nanosheets display transition-state shape-selectivity similar to bulk MFI zeolite crystals. The suppressed formation of bulky skeletal isomers and C5 cracking products are observed both in the nanosheets and the bulk crystals grown in three dimensions. This is typical for restricted transition-state shape-selectivity, characteristic for the MFI type pores. It is a first clear example of transition-state shape-selectivity inside a zeolitic nanosheet. Owing to the short diffusion path across the sheets, expression of diffusion-based discrimination of reaction products in the MFI nanosheets was limited. The 2-methylnonane formation among monobranched C10 isomers and 2,7-dimethyloctane among dibranched C10 isomers, which in MFI zeolite are favored by product diffusion, was much less favored on the nanosheets compared to the reference bulk ZSM-5 material.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	San Diego, Calif.	Editor
	Language		Wos	000317558000009	Publication Date	2013-02-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-9517;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.844	Times cited	121	Open Access
	Notes	Methusalem; IAP; Countatoms			Approved	Most recent IF: 6.844; 2013 IF: 6.073
	Call Number	UA @ lucian @ c:irua:106186			Serial	2181
Permanent link to this record



	Author	Yalcin, A.O.; Fan, Z.; Goris, B.; Li, W.F.; Koster, R.S.; Fang, C.M.; van Blaaderen, A.; Casavola, M.; Tichelaar, F.D.; Bals, S.; Van Tendeloo, G.; Vlugt, T.J.H.; Vanmaekelbergh, D.; Zandbergen, H.W.; van Huis, M.A.;
	Title	Atomic resolution monitoring of cation exchange in CdSe-PbSe heteronanocrystals during epitaxial solid-solid-vapor growth			Type	A1 Journal article
	Year	2014	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	14	Issue	6	Pages	3661-3667
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Here, we show a novel solidsolidvapor (SSV) growth mechanism whereby epitaxial growth of heterogeneous semiconductor nanowires takes place by evaporation-induced cation exchange. During heating of PbSe-CdSe nanodumbbells inside a transmission electron microscope (TEM), we observed that PbSe nanocrystals grew epitaxially at the expense of CdSe nanodomains driven by evaporation of Cd. Analysis of atomic-resolution TEM observations and detailed atomistic simulations reveals that the growth process is mediated by vacancies.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000337337100106	Publication Date	2014-05-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	42	Open Access	OpenAccess
	Notes	262348 Esmi; Fwo; 246791 Countatoms; 335078 Colouratom; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 12.712; 2014 IF: 13.592
	Call Number	UA @ lucian @ c:irua:117027			Serial	179
Permanent link to this record



	Author	Liakakos, N.; Gatel, C.; Blon, T.; Altantzis, T.; Lentijo-Mozo, S.; Garcia-Marcelot, C.; Lacroix, L.M.; Respaud, M.; Bals, S.; Van Tendeloo, G.; Soulantica, K.
	Title	CoFe nanodumbbells : synthesis, structure, and magnetic properties			Type	A1 Journal article
	Year	2014	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	14	Issue	5	Pages	2747-2754
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	We report the solution phase synthesis, the structural analysis, and the magnetic properties of hybrid nanostructures combining two magnetic metals. These nano-objects are characterized by a remarkable shape, combining Fe nanocubes on Co nanorods. The topological composition, the orientation relationship, and the growth steps have been studied by advanced electron microscopy techniques, such as HRTEM, electron tomography, and state-of-the-art 3-dimensional elemental mapping by EDX tomography. The soft iron nanocubes behave as easy nucleation centers that induce the magnetization reversal of the entire nanohybrid, leading to a drastic modification of the overall effective magnetic anisotropy.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000336074800080	Publication Date	2014-04-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	27	Open Access	OpenAccess
	Notes	The authors thank the ANR for the project “Batmag”, the French national project EMMA (ANR12 BS10 013 01), the European Commission for the FP7 NAMDIATREAM project (EU NMP4-LA-2010-246479), and the METSA network for the HRTEM. This has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative- I3). It was also supported by Programme Investissements d’Avenir under the program ANR-11-IDEX-0002-02, reference ANR-10-LABX-0037-NEXT. The authors acknowledge financial support from European Research Council (ERC Advanced Grant # 24691-COUNTATOMS and ERC Starting Grant # 335078-COLOURATOMS).; esteem2ta; ECASSara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 12.712; 2014 IF: 13.592
	Call Number	UA @ lucian @ c:irua:116953			Serial	377
Permanent link to this record



	Author	Hutter, E.M.; Bladt, E.; Goris, B.; Pietra, F.; van der Bok, J.C.; Boneschanscher, M.P.; de Donega, C.M.; Bals, S.; Vanmaekelbergh, D.
	Title	Conformal and atomic characterization of ultrathin CdSe platelets with a helical shape			Type	A1 Journal article
	Year	2014	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	14	Issue	11	Pages	6257-6262
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Currently, ultrathin colloidal CdSe semiconductor nanoplatelets (NPLs) with a uniform thickness that is controllable up to the atomic scale can be prepared. The optical properties of these 2D semiconductor systems are the subject of extensive research. Here, we reveal their natural morphology and atomic arrangement. Using cryo-TEM (cryo-transmission electron microscopy), we show that the shape of rectangular NPLs in solution resembles a helix. Fast incorporation of these NPLs in silica preserves and immobilizes their helical shape, which allowed us to perform an in-depth study by high angle annular dark field scanning transmission electron microscopy (HAADF-STEM). Electron tomography measurements confirm and detail the helical shape of these systems. Additionally, high-resolution HAADF-STEM shows the thickness of the NPLs on the atomic scale and furthermore that these are consistently folded along a ?110? direction. The presence of a silica shell on both the top and bottom surfaces shows that Cd atoms must be accessible for silica precursor (and ligand) molecules on both sides.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000345723800036	Publication Date	2014-10-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	43	Open Access	OpenAccess
	Notes	Dariusz Mitoraj, Hans Meeldijk, Relinde van Dijk-Moes, and Stephan Zevenhuizen are acknowledged for technical support and help with some experiments. The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP/2007-2013)/ERC Grant Agreement no. 291667. The authors acknowledge financial support from FOM and NOW [FOM program Functional NanoParticle Solids (FNPS)]. S.B. acknowledges financial support from European Research Council (ERC Starting Grant #335078- COLOURATOMS). E.B. and B.G. gratefully acknowledge financial support by the Flemish Fund for Scientific Research (FWO Vlaanderen).; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 12.712; 2014 IF: 13.592
	Call Number	UA @ lucian @ c:irua:122209			Serial	490
Permanent link to this record



	Author	Evers, W.H.; Goris, B.; Bals, S.; Casavola, M.; de Graaf, J.; van Roij, R.; Dijkstra, M.; Vanmaekelbergh, D.
	Title	Low-dimensional semiconductor superlattices formed by geometric control over nanocrystal attachment			Type	A1 Journal article
	Year	2013	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	13	Issue	6	Pages	2317-2323
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Oriented attachment, the process in which nanometer-sized crystals fuse by atomic bonding of specific crystal facets, is expected to be more difficult to control than nanocrystal self-assembly that is driven by entropic factors or weak van der Waals attractions. Here, we present a study of oriented attachment of PbSe nanocrystals that counteract this tuition. The reaction was studied in a thin film of the suspension casted on an immiscible liquid at a given temperature. We report that attachment can be controlled such that it occurs with one type of facets exclusively. By control of the temperature and particle concentration we obtain one- or two-dimensional PbSe single crystals, the latter with a honeycomb or square superimposed periodicity in the nanometer range. We demonstrate the ability to convert these PbSe superstructures into other semiconductor compounds with the preservation of crystallinity and geometry.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000320485100001	Publication Date	2012-10-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	206	Open Access
	Notes	262348 ESMI; Hercules 3			Approved	Most recent IF: 12.712; 2013 IF: 12.940
	Call Number	UA @ lucian @ c:irua:101777			Serial	1847
Permanent link to this record



	Author	Goris, B.; de Beenhouwer, J.; de Backer, A.; Zanaga, D.; Batenburg, K.J.; Sánchez-Iglesias, A.; Liz-Marzán, L.M.; Van Aert, S.; Bals, S.; Sijbers, J.; Van Tendeloo, G.
	Title	Measuring lattice strain in three dimensions through electron microscopy			Type	A1 Journal article
	Year	2015	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	15	Issue	15	Pages	6996-7001
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	The three-dimensional (3D) atomic structure of nanomaterials, including strain, is crucial to understand their properties. Here, we investigate lattice strain in Au nanodecahedra using electron tomography. Although different electron tomography techniques enabled 3D characterizations of nanostructures at the atomic level, a reliable determination of lattice strain is not straightforward. We therefore propose a novel model-based approach from which atomic coordinates are measured. Our findings demonstrate the importance of investigating lattice strain in 3D.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000363003100108	Publication Date	2015-09-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	87	Open Access	OpenAccess
	Notes	Fwo; 335078 Colouratom; 267867 Plasmaquo; 312483 Esteem2; 262348 Esmi; esteem2jra4; ECASSara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 12.712; 2015 IF: 13.592
	Call Number	c:irua:127639 c:irua:127639			Serial	1965
Permanent link to this record



	Author	Biermans, E.; Molina, L.; Batenburg, K.J.; Bals, S.; Van Tendeloo, G.
	Title	Measuring porosity at the nanoscale by quantitative electron tomography			Type	A1 Journal article
	Year	2010	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	10	Issue	12	Pages	5014-5019
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Quantitative electron tomography is proposed to characterize porous materials at a nanoscale. To achieve reliable three-dimensional (3D) quantitative information, the influence of missing wedge artifacts and segmentation methods is investigated. We are presenting the Discrete Algebraic Reconstruction Algorithm as the most adequate tomography method to measure porosity at the nanoscale. It provides accurate 3D quantitative information, regardless the presence of a missing wedge. As an example, we applied our approach to nanovoids in La2Zr2O7 thin films.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000284990900040	Publication Date	2010-11-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	79	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 12.712; 2010 IF: 12.219
	Call Number	UA @ lucian @ c:irua:87658			Serial	1967
Permanent link to this record



	Author	Goris, B.; Polavarapu, L.; Bals, S.; Van Tendeloo, G.; Liz-Marzán, L.M.
	Title	Monitoring galvanic replacement through three-dimensional morphological and chemical mapping			Type	A1 Journal article
	Year	2014	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	14	Issue	6	Pages	3220-3226
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Galvanic replacement reactions on metal nanoparticles are often used for the preparation of hollow nanostructures with tunable porosity and chemical composition, leading to tailored optical and catalytic properties. However, the precise interplay between the three-dimensional (3D) morphology and chemical composition of nanostructures during galvanic replacement is not always well understood as the 3D chemical imaging of nanoscale materials is still challenging. It is especially far from straightforward to obtain detailed information from the inside of hollow nanostructures using electron microscopy techniques such as SEM or TEM. We demonstrate here that a combination of state-of-the-art EDX mapping with electron tomography results in the unambiguous determination of both morphology transformation and elemental composition of nanostructures in 3D, during galvanic replacement of Ag nanocubes. This work provides direct and unambiguous experimental evidence toward understanding the galvanic replacement reaction. In addition, the powerful approach presented here can be applied to a wide range of nanoscale transformation processes, which will undoubtedly guide the development of novel nanostructures.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000337337100038	Publication Date	2014-05-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	120	Open Access	OpenAccess
	Notes	267867 Plasmaquo; 246791 Countatoms; 335078 Colouratom; 262348 Esmi; Fwo; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 12.712; 2014 IF: 13.592
	Call Number	UA @ lucian @ c:irua:116954			Serial	2189
Permanent link to this record



	Author	Bals, S.; Batenburg, J.; Verbeeck, J.; Sijbers, J.; Van Tendeloo, G.
	Title	Quantitative three-dimensional reconstruction of catalyst particles for bamboo-like carbon nanotubes			Type	A1 Journal article
	Year	2007	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	7	Issue	12	Pages	3669-3674
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	The three-dimensional (3D) structure and chemical composition of bamboo-like carbon nanotubes including the catalyst particles that are. used during their growth are studied by discrete electron tomography in combination with energy-filtered transmission electron microscopy. It is found that cavities are present in the catalyst particles. Furthermore, only a small percentage of the catalyst particles consist of pure Cu, since a large volume fraction of the particles is oxidized to CU(2)0. These volume fractions are determined quantitatively from 3D reconstructions obtained by discrete tomography.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000251581600022	Publication Date	2007-11-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	78	Open Access
	Notes	Fwo; Esteem			Approved	Most recent IF: 12.712; 2007 IF: 9.627
	Call Number	UA @ lucian @ c:irua:66762UA @ admin @ c:irua:66762			Serial	2768
Permanent link to this record



	Author	Grzelczak, M.; Sánchez-Iglesias, A.; Heidari Mezerji, H.; Bals, S.; Pérez-Juste, J.; Liz-Marzán, L.M.
	Title	Steric hindrance induces crosslike self-assembly of gold nanodumbbells			Type	A1 Journal article
	Year	2012	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	12	Issue	8	Pages	4380-4384
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	In the formation of colloidal molecules, directional interactions are crucial for controlling the spatial distribution of the building blocks. Anisotropic nanoparticles facilitate directional clustering via steric constraints imposed by each specific shape, thereby restricting assembly along certain directions. We show in this Letter that the combination of patchiness (attraction) and shape (steric hindrance) allows assembling gold nanodumbbell building blocks into crosslike dimers with well-controlled interparticle distance and relative orientation. Steric hindrance between interacting dumbbell-like particles opens up a new synthetic approach toward low-symmetry plasmonic clusters, which may significantly contribute to understand complex plasmonic phenomena.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000307211000081	Publication Date	2012-07-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	85	Open Access
	Notes	Nanodirect 213948-2; 262348 Esmi			Approved	Most recent IF: 12.712; 2012 IF: 13.025
	Call Number	UA @ lucian @ c:irua:101900			Serial	3161
Permanent link to this record



	Author	Bals, S.; Casavola, M.; van Huis, M.A.; Van Aert, S.; Batenburg, K.J.; Van Tendeloo, G.; Vanmaekelbergh, D.
	Title	Three-dimensional atomic imaging of colloidal core-shell nanocrystals			Type	A1 Journal article
	Year	2011	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	11	Issue	8	Pages	3420-3424
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Colloidal coreshell semiconductor nanocrystals form an important class of optoelectronic materials, in which the exciton wave functions can be tailored by the atomic configuration of the core, the interfacial layers, and the shell. Here, we provide a trustful 3D characterization at the atomic scale of a free-standing PbSe(core)CdSe(shell) nanocrystal by combining electron microscopy and discrete tomography. Our results yield unique insights for understanding the process of cation exchange, which is widely employed in the synthesis of coreshell nanocrystals. The study that we present is generally applicable to the broad range of colloidal heteronanocrystals that currently emerge as a new class of materials with technological importance.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000293665600062	Publication Date	2011-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	121	Open Access
	Notes	Esteem 026019; Fwo			Approved	Most recent IF: 12.712; 2011 IF: 13.198
	Call Number	UA @ lucian @ c:irua:91263			Serial	3643
Permanent link to this record