|
Records |
|
Author |
Leca, V.; Blank, D.H.A.; Rijnders, G.; Bals, S.; Van Tendeloo, G. |
|
Title |
Superconducting single-phase Sr1-xLaxCuO2 thin films with improved crystallinity grown by pulsed laser deposition |
Type |
A1 Journal article |
|
Year |
2006 |
Publication |
Applied physics letters |
Abbreviated Journal |
Appl Phys Lett |
|
Volume |
89 |
Issue |
9 |
Pages |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Sr1-xLaxCuO2-delta (x=0.10-0.20) thin films exhibiting an oxygen-deficient 2 root 2a(p)x2 root a(p) x c structure (a(p) and c represent the cell parameters of the perovskite subcell) were epitaxially grown by means of pulsed laser deposition in low-pressure oxygen ambient. (001) KTaO3 and (001) SrTiO3 single crystals were used as substrates, with BaTiO3 as buffer layer. The Sr1-xLaxCuO2-delta films were oxidized during cooling down in order to yield the infinite-layer-type structure. By applying this method, high quality single-phase Sr1-xLaxCuO2 thin films could be obtained for 0.10 <= x <= 0.175 doping range. The films grown on BaTiO3/KTaO3 show superconductivity for 0.15 <= x <= 0.175 with optimum doping at x=0.15, in contrast with previously reported data. (c) 2006 American Institute of Physics. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
American Institute of Physics |
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
New York, N.Y. |
Editor |
|
|
Language |
|
Wos |
000240236600077 |
Publication Date |
2006-08-31 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0003-6951; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
3.411 |
Times cited |
32 |
Open Access |
|
|
Notes |
Fom; Fwo |
Approved |
Most recent IF: 3.411; 2006 IF: 3.977 |
|
Call Number |
UA @ lucian @ c:irua:60817 |
Serial |
3366 |
Permanent link to this record |
|
|
|
|
Author |
Bals, S.; Van Tendeloo, G.; Rijnders, G.; Huijben, M.; Leca, V.; Blank, D.H.A. |
|
Title |
Transmission electron microscopy on interface engineered superconducting thin films |
Type |
A1 Journal article |
|
Year |
2003 |
Publication |
IEEE transactions on applied superconductivity |
Abbreviated Journal |
Ieee T Appl Supercon |
|
Volume |
13 |
Issue |
2:3 |
Pages |
2834-2837 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Transmission electron microscopy is used to evaluate different deposition techniques, which optimize the microstructure and physical properties of superconducting thin films. High-resolution electron microscopy proves that the use of an YBa2Cu2Ox buffer layer can avoid a variable interface configuration in YBa2Cu3O7-delta thin films grown on SrTiO3. The growth can also be controlled at an atomic level by, using sub-unit cell layer epitaxy, which results in films with high quality and few structural defects. Epitaxial strain in Sr0.85La0.15CuO2 infinite layer thin films influences the critical temperature of these films, as well as the microstructure. Compressive stress is released by a modulated or a twinned microstructure, which eliminates superconductivity. On the other hand, also tensile strain seems to lower the critical temperature of the infinite layer. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
New York, N.Y. |
Editor |
|
|
Language |
|
Wos |
000184242400101 |
Publication Date |
2003-07-16 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1051-8223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
|
Times cited |
13 |
Open Access |
|
|
Notes |
Iuap V-1; Fwo |
Approved |
Most recent IF: NA |
|
Call Number |
UA @ lucian @ c:irua:103292 |
Serial |
3712 |
Permanent link to this record |
|
|
|
|
Author |
Bals, S.; Van Tendeloo, G.; Salluzzo, M.; Maggio-Aprile, I. |
|
Title |
Why are sputter deposited Nd1+xBa2-xCu3O7-\delta thin films flatter than NdBa2Cu3O7-\delta films? |
Type |
A1 Journal article |
|
Year |
2001 |
Publication |
Applied physics letters |
Abbreviated Journal |
Appl Phys Lett |
|
Volume |
79 |
Issue |
22 |
Pages |
3660-3662 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
High-resolution electron microscopy and scanning tunneling microscopy have been used to compare the microstructure of NdBa2Cu3O7-delta and Nd1+xBa2-xCu3O7-delta thin films. Both films contain comparable amounts of Nd2CuO4 inclusions. Antiphase boundaries are induced by unit cell high steps at the substrate or by a different interface stacking. In Nd1+xBa2-xCu3O7-delta the antiphase boundaries tend to annihilate by the insertion of extra Nd layers. Stacking faults, which can be characterized as local Nd2Ba2Cu4O9 inclusions, also absorb the excess Nd. A correlation is made between the excess Nd and the absence of growth spirals at the surface of the Nd-rich films. (C) 2001 American Institute of Physics. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
American Institute of Physics |
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
New York, N.Y. |
Editor |
|
|
Language |
|
Wos |
000172204400034 |
Publication Date |
2002-07-26 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0003-6951; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
3.411 |
Times cited |
13 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 3.411; 2001 IF: 3.849 |
|
Call Number |
UA @ lucian @ c:irua:54801 |
Serial |
3916 |
Permanent link to this record |
|
|
|
|
Author |
Geenen, F.A.; van Stiphout, K.; Nanakoudis, A.; Bals, S.; Vantomme, A.; Jordan-Sweet, J.; Lavoie, C.; Detavernier, C. |
|
Title |
Controlling the formation and stability of ultra-thin nickel silicides : an alloying strategy for preventing agglomeration |
Type |
A1 Journal article |
|
Year |
2018 |
Publication |
Journal of applied physics |
Abbreviated Journal |
J Appl Phys |
|
Volume |
123 |
Issue |
123 |
Pages |
075303 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
The electrical contact of the source and drain regions in state-of-the-art CMOS transistors is nowadays facilitated through NiSi, which is often alloyed with Pt in order to avoid morphological agglomeration of the silicide film. However, the solid-state reaction between as-deposited Ni and the Si substrate exhibits a peculiar change for as-deposited Ni films thinner than a critical thickness of t(c) = 5 nm. Whereas thicker films form polycrystalline NiSi upon annealing above 450 degrees C, thinner films form epitaxial NiSi2 films that exhibit a high resistance toward agglomeration. For industrial applications, it is therefore of utmost importance to assess the critical thickness with high certainty and find novel methodologies to either increase or decrease its value, depending on the aimed silicide formation. This paper investigates Ni films between 0 and 15 nm initial thickness by use of “thickness gradients,” which provide semi-continuous information on silicide formation and stability as a function of as-deposited layer thickness. The alloying of these Ni layers with 10% Al, Co, Ge, Pd, or Pt renders a significant change in the phase sequence as a function of thickness and dependent on the alloying element. The addition of these ternary impurities therefore changes the critical thickness t(c). The results are discussed in the framework of classical nucleation theory. Published by AIP Publishing. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
American Institute of Physics |
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
New York, N.Y. |
Editor |
|
|
Language |
|
Wos |
000425807400018 |
Publication Date |
2018-02-21 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0021-8979; 1089-7550 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
2.068 |
Times cited |
23 |
Open Access |
OpenAccess |
|
Notes |
; The authors acknowledge the FWO Vlaanderen, the Hercules Foundation, and BOF-UGent (GOA 01G01513) for providing financial support for this work. This research used resources of the National Synchrotron Light Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-AC02-98CH10886. ; |
Approved |
Most recent IF: 2.068 |
|
Call Number |
UA @ lucian @ c:irua:149912UA @ admin @ c:irua:149912 |
Serial |
4929 |
Permanent link to this record |
|
|
|
|
Author |
He, Z.; Ke, X.; Bals, S.; Van Tendeloo, G. |
|
Title |
Direct evidence for the existence of multi-walled carbon nanotubes with hexagonal cross-sections |
Type |
A1 Journal article |
|
Year |
2012 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
Volume |
50 |
Issue |
7 |
Pages |
2524-2529 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Carbon nanotubes (CNTs) with a polygonal cross-section have been paid increasing attention since their three-dimensional structure is related to specific physical properties, which are found to be different in comparison to CNTs with a circular cross-section. Here, we report the existence of novel multi-walled CNTs yielding walls with a rounded-hexagonal configuration. This structure was directly confirmed for the first time by both cross-sectional transmission electron microscopy and electron tomography. The morphology of the Fe catalytic particle also exhibits hexagonal characteristics, and is proposed as the origin of the formation of the rounded-hexagonal walls of the CNT. This observation is of great importance with respect to the design of polygonal (such as pentagonal or hexagonal) cross-sectional CNTs. By controlling the morphology of the catalytic nanoparticles it will be possible to grow CNTs with desired electronic and mechanical properties. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Oxford |
Editor |
|
|
Language |
|
Wos |
000303038400015 |
Publication Date |
2012-02-06 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
6.337 |
Times cited |
8 |
Open Access |
|
|
Notes |
Fwo |
Approved |
Most recent IF: 6.337; 2012 IF: 5.868 |
|
Call Number |
UA @ lucian @ c:irua:96956 |
Serial |
711 |
Permanent link to this record |
|
|
|
|
Author |
Pasquini, L.; Sacchi, M.; Brighi, M.; Boelsma, C.; Bals, S.; Perkisas, T.; Dam, B. |
|
Title |
Hydride destabilization in core-shell nanoparticles |
Type |
A1 Journal article |
|
Year |
2014 |
Publication |
International journal of hydrogen energy |
Abbreviated Journal |
Int J Hydrogen Energ |
|
Volume |
39 |
Issue |
5 |
Pages |
2115-2123 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
We present a model that describes the effect of elastic constraint on the thermodynamics of hydrogen absorption and desorption in biphasic core-shell nanoparticles, where the core is a hydride forming metal. In particular, the change of the hydride formation enthalpy and of the equilibrium pressure for the metal/hydride transformation are described as a function of nanoparticles radius, shell thickness, and elastic properties of both core and shell. To test the model, the hydrogen sorption isotherms of Mg-MgO core-shell nanoparticles, synthesized by inert gas condensation, were measured by means of optical hydrogenography. The model's predictions are in good agreement with the experimentally determined plateau pressure of hydrogen absorption. The features that a core-shell systems should exhibit in view of practical hydrogen storage applications are discussed with reference to the model and the experimental results. Copyright (C) 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Oxford |
Editor |
|
|
Language |
|
Wos |
000331344800022 |
Publication Date |
2014-01-04 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0360-3199; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
3.582 |
Times cited |
32 |
Open Access |
Not_Open_Access |
|
Notes |
COST Action MP1103 |
Approved |
Most recent IF: 3.582; 2014 IF: 3.313 |
|
Call Number |
UA @ lucian @ c:irua:115785 |
Serial |
1528 |
Permanent link to this record |
|
|
|
|
Author |
Montoya, E.; Bals, S.; Van Tendeloo, G. |
|
Title |
Redeposition and differential sputtering of La in transmission electron microscopy samples of LaAIO3/SrTiO3 multilayers prepared by focused ion beam |
Type |
A1 Journal article |
|
Year |
2008 |
Publication |
Journal of microscopy |
Abbreviated Journal |
J Microsc-Oxford |
|
Volume |
231 |
Issue |
3 |
Pages |
359-363 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Oxford |
Editor |
|
|
Language |
|
Wos |
000259611000001 |
Publication Date |
2008-08-28 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0022-2720;1365-2818; |
ISBN |
|
Additional Links |
UA library record; WoS full record |
|
Impact Factor |
1.692 |
Times cited |
|
Open Access |
|
|
Notes |
The authors are grateful to M. Huijben and G. Rijnders of the MESA+ group at the University of Twente (NI) for the growth of the multilayers. This work has been performed under the Interuniversity Attraction Poles programme – Belgian State Belgian Science Policy. The authors acknowledge financial support from the European Union under the framework 6 program under a contract for an Integrated Infrastructure initiative. Part of this work was performed with financial support from the European Union under the framework 6 programme, under a contract for an Integrated Infrastructure Initiative (Reference No. 02601.9 ESTEEM). |
Approved |
Most recent IF: 1.692; 2008 IF: 1.409 |
|
Call Number |
UA @ lucian @ c:irua:76522 |
Serial |
2849 |
Permanent link to this record |
|
|
|
|
Author |
Mooij, L.; Perkisas, T.; Palsson, G.; Schreuders, H.; Wolff, M.; Hjorvarsson, B.; Bals, S.; Dam, B. |
|
Title |
The effect of microstructure on the hydrogenation of Mg/Fe thin film multilayers |
Type |
A1 Journal article |
|
Year |
2014 |
Publication |
International journal of hydrogen energy |
Abbreviated Journal |
Int J Hydrogen Energ |
|
Volume |
39 |
Issue |
30 |
Pages |
17092-17103 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Nanoconfined magnesium hydride can be simultaneously protected and thermodynamically destabilized when interfaced with materials such as Ti and Fe. We study the hydrogenation of thin layers of Mg (<14 nm) nanoconfined in one dimension within thin film Fe/Mg/Fe/Pd multilayers by the optical technique Hydrogenography. The hydrogenation of nanosized magnesium layers in Fe/Mg/Fe multilayers surprisingly shows the presence of multiple plateau pressures, whose nature is thickness dependent. In contrast, hydrogen desorption occurs via a single plateau which does not depend on the Mg layer thickness. From structural and morphological analyses with X-ray diffraction/reflectometry and cross-section TEM, we find that the Mg layer roughness is large when deposited on Fe and furthermore contains high-angle grain boundaries (GB's). When grown on Ti, the Mg layer roughness is low and no high-angle GB's are detected. From a Ti/Mg/Fe multilayer, in which the Mg layer is flat and has little or no GB's, we conclude that MgH2 is indeed destabilized by the interface with Fe. In this case, both the ab- and desorption plateau pressures are increased by a factor two compared to the hydrogenation of Mg within Ti/Mg/Ti multilayers. We hypothesize that the GB's in the Fe/Mg/Fe multilayer act as diffusion pathways for Pd, which is known to greatly alter the hydrogenation behavior of Mg when the two materials share an interface. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Oxford |
Editor |
|
|
Language |
|
Wos |
000343839000031 |
Publication Date |
2014-09-10 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0360-3199; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
3.582 |
Times cited |
15 |
Open Access |
Not_Open_Access |
|
Notes |
COST Action MP1103 |
Approved |
Most recent IF: 3.582; 2014 IF: 3.313 |
|
Call Number |
UA @ lucian @ c:irua:121175 |
Serial |
3575 |
Permanent link to this record |
|
|
|
|
Author |
Leroux, O.; Leroux, F.; Bagniewska-Zadworna,.; Knox, J.P.; Claeys, M.; Bals, S.; Viane, R.L.L. |
|
Title |
Ultrastructure and composition of cell wall appositions in the roots of Asplenium (Polypodiales) |
Type |
A1 Journal article |
|
Year |
2011 |
Publication |
Micron |
Abbreviated Journal |
Micron |
|
Volume |
42 |
Issue |
8 |
Pages |
863-870 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Cell wall appositions (CWAs), formed by the deposition of extra wall material at the contact site with microbial organisms, are an integral part of the response of plants to microbial challenge. Detailed histological studies of CWAs in fern roots do not exist. Using light and electron microscopy we examined the (ultra)structure of CWAs in the outer layers of roots of Asplenium species. All cell walls studded with CWAs were impregnated with yellow-brown pigments. CWAs had different shapes, ranging from warts to elongated branched structures, as observed with scanning and transmission electron microscopy. Ultrastructural study further showed that infecting fungi grow intramurally and that they are immobilized by CWAs when attempting to penetrate intracellularly. Immunolabelling experiments using monoclonal antibodies indicated pectic homogalacturonan, xyloglucan, mannan and cellulose in the CWAs, but tests for lignins and callose were negative. We conclude that these appositions are defense-related structures made of a non-lignified polysaccharide matrix on which phenolic compounds are deposited in order to create a barrier protecting the root against infections. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Oxford |
Editor |
|
|
Language |
|
Wos |
000294942600013 |
Publication Date |
2011-06-24 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0968-4328; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
1.98 |
Times cited |
20 |
Open Access |
|
|
Notes |
Fwo |
Approved |
Most recent IF: 1.98; 2011 IF: 1.527 |
|
Call Number |
UA @ lucian @ c:irua:92540 |
Serial |
3798 |
Permanent link to this record |
|
|
|
|
Author |
Adam, N.; Leroux, F.; Knapen, D.; Bals, S.; Blust, R. |
|
Title |
The uptake and elimination of ZnO and CuO nanoparticles in Daphnia magna under chronic exposure scenarios |
Type |
A1 Journal article |
|
Year |
2015 |
Publication |
Water research |
Abbreviated Journal |
Water Res |
|
Volume |
68 |
Issue |
68 |
Pages |
249-261 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Veterinary physiology and biochemistry |
|
Abstract |
In this study, the uptake and elimination of ZnO and CuO nanoparticles in Daphnia magna was tested. Daphnids were exposed during 10 days to sublethal concentrations of ZnO and CuO nanoparticles and corresponding metal salts (ZnCl2 and CuCl2.2H2O), after which they were transferred to unexposed medium for another 10 days. At different times during the exposure and none-exposure, the total and internal zinc or copper concentration of the daphnids was determined and the nanoparticles were localized in the organism using electron microscopy. The exposure concentrations were characterized by measuring the dissolved, nanoparticle and aggregated fraction in the medium. The results showed that the ZnO nanoparticles quickly dissolved after addition to the medium. Contrarily, only a small fraction (corresponding to the dissolved metal salt) of the CuO nanoparticles dissolved, while most of these nanoparticles formed large aggregates. Despite an initial increase in zinc and copper concentration during the first 48 hour to 5 day exposure, the body concentration reached a plateau level that was comparable for the ZnO nanoparticles and ZnCl2, but much higher for the CuO nanoparticles (with visible aggregates accumulating in the gut) than CuCl2.2H2O. During the remaining exposure and subsequent none-exposure phase, the zinc and copper concentration decreased fast to concentrations comparable with the unexposed daphnids. The results indicate that D. magna can regulate its internal zinc and copper concentration after exposure to ZnO and CuO nanoparticles, similar as after exposure to metal salts. The combined dissolution, accumulation and toxicity results confirm that the toxicity of ZnO and CuO nanoparticles is caused by the dissolved fraction. Keywords nano; zinc; copper; dissolution; aggregation; electron microscopy |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Oxford |
Editor |
|
|
Language |
|
Wos |
000347756900022 |
Publication Date |
2014-10-14 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0043-1354; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
6.942 |
Times cited |
51 |
Open Access |
OpenAccess |
|
Notes |
; The authors would like to thank Valentine Mubiana and Steven Joosen (Sphere, UA) for performing the ICP-MS and ICP-OES measurements and Prof. Dr. Gustaaf Van Tendeloo for making the collaboration between the EMAT and Sphere group possible. This study is part of the ENNSATOX-project, which was funded by the EU (NMP4-SL-2009-229244). The authors report no conflicts of interest. ; |
Approved |
Most recent IF: 6.942; 2015 IF: 5.528 |
|
Call Number |
c:irua:119366 c:irua:119366 |
Serial |
3822 |
Permanent link to this record |
|
|
|
|
Author |
Callini, E.; Aguey-Zinsou, K.F.; Ahuja, R.; Ares, J.R.; Bals, S.; Biliškov, N.; Chakraborty, S.; Charalambopoulou, G.; Chaudhary, A.L.; Cuevas, F.; Dam, B.; de Jongh, P.; Dornheim, M.; Filinchuk, Y.; Grbović Novaković, J.; Hirscher, M.; Jensen, T.R.; Jensen, P.B.; Novaković, N.; Lai, Q.; Leardini, F.; Gattia, D.M.; Pasquini, L.; Steriotis, T.; Turner, S.; Vegge, T.; Züttel, A.; Montone, A. |
|
Title |
Nanostructured materials for solid-state hydrogen storage : a review of the achievement of COST Action MP1103 |
Type |
A1 Journal article |
|
Year |
2016 |
Publication |
International journal of hydrogen energy
T2 – E-MRS Fall Meeting / Symposium C on Hydrogen Storage in Solids -, Materials, Systems and Aplication Trends, SEP 15-18, 2015, Warsaw, POLAND |
Abbreviated Journal |
Int J Hydrogen Energ |
|
Volume |
41 |
Issue |
41 |
Pages |
14404-14428 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
In the framework of the European Cooperation in Science and Technology (COST) Action MP1103 Nanostructured Materials for Solid-State Hydrogen Storage were synthesized, characterized and modeled. This Action dealt with the state of the art of energy storage and set up a competitive and coordinated network capable to define new and unexplored ways for Solid State Hydrogen Storage by innovative and interdisciplinary research within the European Research Area. An important number of new compounds have been synthesized: metal hydrides, complex hydrides, metal halide ammines and amidoboranes. Tuning the structure from bulk to thin film, nanoparticles and nanoconfined composites improved the hydrogen sorption properties and opened the perspective to new technological applications. Direct imaging of the hydrogenation reactions and in situ measurements under operando conditions have been carried out in these studies. Computational screening methods allowed the prediction of suitable compounds for hydrogen storage and the modeling of the hydrogen sorption reactions on mono-, bi-, and three-dimensional systems. This manuscript presents a review of the main achievements of this Action. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
Pergamon-elsevier science ltd |
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Oxford |
Editor |
|
|
Language |
|
Wos |
000381950800051 |
Publication Date |
2016-05-08 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0360-3199 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
3.582 |
Times cited |
89 |
Open Access |
Not_Open_Access |
|
Notes |
All the authors greatly thank the COST Action MP1103 for financial support. |
Approved |
Most recent IF: 3.582 |
|
Call Number |
UA @ lucian @ c:irua:135723 |
Serial |
4307 |
Permanent link to this record |
|
|
|
|
Author |
Bals, S.; Goris, B.; Altantzis, T.; Heidari, H.; Van Aert, S.; Van Tendeloo, G. |
|
Title |
Seeing and measuring in 3D with electrons |
Type |
A1 Journal article |
|
Year |
2014 |
Publication |
Comptes rendus : physique |
Abbreviated Journal |
Cr Phys |
|
Volume |
15 |
Issue |
2-3 |
Pages |
140-150 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Modern TEM enables the investigation of nanostructures at the atomic scale. However, TEM images are only two-dimensional (2D) projections of a three-dimensional (3D) object. Electron tomography can overcome this limitation. The technique is increasingly focused towards quantitative measurements and reaching atomic resolution in 3D has been the ultimate goal for many years. Therefore, one needs to optimize the acquisition of the data, the 3D reconstruction techniques as well as the quantification methods. Here, we will review a broad range of methodologies and examples. Finally, we will provide an outlook and will describe future challenges in the field of electron tomography. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Paris |
Editor |
|
|
Language |
|
Wos |
000334013600005 |
Publication Date |
2014-01-20 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1631-0705; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
2.048 |
Times cited |
15 |
Open Access |
OpenAccess |
|
Notes |
(FWO;Belgium); European Research Council under the 7th Framework Program (FP7); ERC grant No.246791 – COUNTATOMS; ERC grant No.335078 – COLOURATOMS; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot); |
Approved |
Most recent IF: 2.048; 2014 IF: 2.035 |
|
Call Number |
UA @ lucian @ c:irua:113855 |
Serial |
2960 |
Permanent link to this record |
|
|
|
|
Author |
Bals, S.; Goris, B.; de Backer, A.; Van Aert, S.; Van Tendeloo, G. |
|
Title |
Atomic resolution electron tomography |
Type |
A1 Journal article |
|
Year |
2016 |
Publication |
MRS bulletin |
Abbreviated Journal |
Mrs Bull |
|
Volume |
41 |
Issue |
41 |
Pages |
525-530 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Over the last two decades, three-dimensional (3D) imaging by transmission electron microscopy or “electron tomography” has evolved into a powerful tool to investigate a variety of nanomaterials in different fields, such as life sciences, chemistry, solid-state physics, and materials science. Most of these results were obtained with nanometer-scale resolution, but different approaches have recently pushed the resolution to the atomic level. Such information is a prerequisite to understand the specific relationship between the atomic structure and the physicochemical properties of (nano) materials. We provide an overview of the latest progress in the field of atomic-resolution electron tomography. Different imaging and reconstruction approaches are presented, and state-of-the-art results are discussed. This article demonstrates the power and importance of electron tomography with atomic-scale resolution. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Pittsburgh, Pa |
Editor |
|
|
Language |
|
Wos |
000382508100012 |
Publication Date |
2016-07-07 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0883-7694 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.199 |
Times cited |
19 |
Open Access |
OpenAccess |
|
Notes |
; The authors gratefully acknowledge funding from the Research Foundation Flanders (G.0381.16N, G.036915, G.0374.13, and funding of postdoctoral grants to B.G. and A.D.B.). S.B. acknowledges the European Research Council, ERC Grant Number 335078-Colouratom. The research leading to these results received funding from the European Union Seventh Framework Program under Grant Agreements 312483 (ESTEEM2). The authors would like to thank the colleagues who have contributed to this work, including K.J. Batenburg, J. De Beenhouwer, R. Erni, M.D. Rossell, W. Van den Broek, L. Liz-Marzan, E. Carbo-Argibay, S. Gomez-Grana, P. Lievens, M. Van Bael, B. Partoens, B. Schoeters, and J. Sijbers. ; ecas_sara |
Approved |
Most recent IF: 5.199 |
|
Call Number |
UA @ lucian @ c:irua:135690 |
Serial |
4299 |
Permanent link to this record |
|
|
|
|
Author |
Ben Dkhil, S.; Pfannmöller, M.; Bals, S.; Koganezawa, T.; Yoshimoto, N.; Hannani, D.; Gaceur, M.; Videlot-Ackermann, C.; Margeat, O.; Ackermann, J. |
|
Title |
Square-centimeter-sized high-efficiency polymer solar cells : how the processing atmosphere and film quality influence performance at large scale |
Type |
A1 Journal article |
|
Year |
2016 |
Publication |
Laser physics review |
Abbreviated Journal |
Adv Energy Mater |
|
Volume |
6 |
Issue |
6 |
Pages |
1600290 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Organic solar cells based on two benzodithiophene-based polymers (PTB7 and PTB7-Th) processed at square centimeter-size under inert atmosphere and ambient air, respectively, are investigated. It is demonstrated that the performance of solar cells processed under inert atmosphere is not limited by the upscaling of photoactive layer and the interfacial layers. Thorough morphological and electrical characterizations of optimized layers and corresponding devices reveal that performance losses due to area enlargement are only caused by the sheet resistance of the transparent electrode reducing the effi ciency from 9.3% of 7.8% for PTB7-Th in the condition that both photoactive layer and the interfacial layers are of high layer quality. Air processing of photoactive layer and the interfacial layers into centimeter-sized solar cells lead to additional, but only slight, losses (< 10%) in all photovoltaic parameters, which can be addressed to changes in the electronic properties of both active layer and ZnO layers rather than changes in layer morphology. The demonstrated compatibility of polymer solar cells using solution-processed photoactive layer and interfacial layers with large area indicates that the introduction of a standard active area of 1 cm(2) for measuring effi ciency of organic record solar cells is feasible. However electric standards for indium tin oxides (ITO) or alternative transparent electrodes need to be developed so that performance of new photovoltaic materials can be compared at square centimeter-size. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Place of publication unknown |
Editor |
|
|
Language |
|
Wos |
000379314700010 |
Publication Date |
2016-05-04 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1614-6832 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
16.721 |
Times cited |
6 |
Open Access |
Not_Open_Access |
|
Notes |
; The authors acknowledge financial support by the French Fond Unique Intermisteriel (FUI) under the project “SFUMATO” (Grant number: F1110019V/ 201308815) as well as by the European Commission under the Project “SUNFLOWER” (FP7-ICT-2011-7-contract no. 287594). Generalitat Valenciana (ISIC/2012/008 Institute of Nanotechnologies for Clean Energies) is also acknowledged for providing financial support. The synchrotron radiation experiments were performed at BL46XU and BL19B2 in SPring-8 with the approval of Japan Synchrotron Radiation Research Institute (JASRI) (Proposal Nos. 2014B1916 and 2015A1984). The authors further acknowledge financial support from the European Research Council (ERC Starting Grant #335078-COLOURATOMS). ; |
Approved |
Most recent IF: 16.721 |
|
Call Number |
UA @ lucian @ c:irua:134951 |
Serial |
4249 |
Permanent link to this record |
|
|
|
|
Author |
Ben Dkhil, S.; Pfannmöller, M.; Saba, M.I.; Gaceur, M.; Heidari, H.; Videlot-Ackermann, C.; Margeat, O.; Guerrero, A.; Bisquert, J.; Garcia-Belmonte, G.; Mattoni, A.; Bals, S.; Ackermann, J. |
|
Title |
Toward high-temperature stability of PTB7-based bulk heterojunction solar cells : impact of fullerene size and solvent additive |
Type |
A1 Journal article |
|
Year |
2017 |
Publication |
Laser physics review |
Abbreviated Journal |
Adv Energy Mater |
|
Volume |
7 |
Issue |
7 |
Pages |
1601486 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
The use of fullerene as acceptor limits the thermal stability of organic solar cells at high temperatures as their diffusion inside the donor leads to phase separation via Ostwald ripening. Here it is reported that fullerene diffusion is fully suppressed at temperatures up to 140 degrees C in bulk heterojunctions based on the benzodithiophene-based polymer (the poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b: 4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl) carbonyl]thieno[3,4-b]thiophenediyl]], (PTB7) in combination with the fullerene derivative [6,6]-phenyl-C71-butyric acid methyl ester (PC70BM). The blend stability is found independently of the presence of diiodooctane (DIO) used to optimize nanostructuration and in contrast to PTB7 blends using the smaller fullerene derivative PC70BM. The unprecedented thermal stability of PTB7: PC70BM layers is addressed to local minima in the mixing enthalpy of the blend forming stable phases that inhibit fullerene diffusion. Importantly, although the nanoscale morphology of DIO processed blends is thermally stable, corresponding devices show strong performance losses under thermal stress. Only by the use of a high temperature annealing step removing residual DIO from the device, remarkably stable high efficiency solar cells with performance losses less than 10% after a continuous annealing at 140 degrees C over 3 days are obtained. These results pave the way toward high temperature stable polymer solar cells using fullerene acceptors. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Place of publication unknown |
Editor |
|
|
Language |
|
Wos |
000396328500009 |
Publication Date |
2016-11-07 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1614-6832; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
16.721 |
Times cited |
27 |
Open Access |
Not_Open_Access |
|
Notes |
; The authors acknowledge financial support by the French Fond Unique Interministeriel (FUI) under the project “SFUMATO” (grant number: F1110019V/ 201308815) as well as by the European Commission under the Project “SUNFLOWER” (FP7-ICT-2011-7, grant number: 287594). Generalitat Valenciana (ISIC/2012/008 Institute of Nanotechnologies for Clean Energies) is also acknowledged for providing financial support. The authors further acknowledge financial support via ERC Starting Grant Colouratoms (335078). ; |
Approved |
Most recent IF: 16.721 |
|
Call Number |
UA @ lucian @ c:irua:141991UA @ admin @ c:irua:141991 |
Serial |
4697 |
Permanent link to this record |
|
|
|
|
Author |
Turner, S.; Tavernier, S.M.F.; Huyberechts, G.; Bals, S.; Batenburg, K.J.; Van Tendeloo, G. |
|
Title |
Assisted spray pyrolysis production and characterisation of ZnO nanoparticles with narrow size distribution |
Type |
A1 Journal article |
|
Year |
2010 |
Publication |
Journal of nanoparticle research |
Abbreviated Journal |
J Nanopart Res |
|
Volume |
12 |
Issue |
2 |
Pages |
615-622 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
|
Abstract |
Nano-sized ZnO particles with a narrow size distribution and high crystallinity were prepared from aqueous solutions with high concentrations of Zn2+ containing salts and citric acid in a conventional spray pyrolysis setup. Structure, morphology and size of the produced material were compared to ZnO material produced by simple spray pyrolysis of zinc nitrates in the same experimental setup. Using transmission electron microscopy and electron tomography it has been shown that citric acid-assisted spray pyrolysed material is made up of micron sized secondary particles comprising a shell of lightly agglomerated, monocrystalline primary ZnO nanoparticles with sizes in the 2030 nm range, separable by a simple ultrasonic treatment step. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
S.l. |
Editor |
|
|
Language |
|
Wos |
000275318700025 |
Publication Date |
2009-04-20 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1388-0764;1572-896X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
2.02 |
Times cited |
27 |
Open Access |
|
|
Notes |
Esteem 026019 |
Approved |
Most recent IF: 2.02; 2010 IF: 3.253 |
|
Call Number |
UA @ lucian @ c:irua:81771 |
Serial |
156 |
Permanent link to this record |
|
|
|
|
Author |
Roose, D.; Leroux, F.; de Vocht, N.; Guglielmetti, C.; Pintelon, I.; Adriaensen, D.; Ponsaerts, P.; van der Linden, A.-M.; Bals, S. |
|
Title |
Multimodal imaging of micron-sized iron oxide particles following in vitro and in vivo uptake by stem cells: down to the nanometer scale |
Type |
A1 Journal article |
|
Year |
2014 |
Publication |
Contrast media and molecular imaging |
Abbreviated Journal |
Contrast Media Mol I |
|
Volume |
9 |
Issue |
6 |
Pages |
400-408 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Bio-Imaging lab |
|
Abstract |
In this study, the interaction between cells and micron-sized paramagnetic iron oxide (MPIO) particles was investigated by characterizing MPIO in their original state, and after cellular uptake in vitro as well as in vivo. Moreover, MPIO in the olfactory bulb were studied 9months after injection. Using various imaging techniques, cell-MPIO interactions were investigated with increasing spatial resolution. Live cell confocal microscopy demonstrated that MPIO co-localize with lysosomes after in vitro cellular uptake. In more detail, a membrane surrounding the MPIO was observed by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Following MPIO uptake in vivo, the same cell-MPIO interaction was observed by HAADF-STEM in the subventricular zone at 1week and in the olfactory bulb at 9months after MPIO injection. These findings provide proof for the current hypothesis that MPIO are internalized by the cell through endocytosis. The results also show MPIO are not biodegradable, even after 9months in the brain. Moreover, they show the possibility of HAADF-STEM generating information on the labeled cell as well as on the MPIO. In summary, the methodology presented here provides a systematic route to investigate the interaction between cells and nanoparticles from the micrometer level down to the nanometer level and beyond. Copyright (c) 2014 John Wiley Sons, Ltd. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
S.l. |
Editor |
|
|
Language |
|
Wos |
000346172100001 |
Publication Date |
2014-04-24 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1555-4309; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
3.307 |
Times cited |
5 |
Open Access |
Not_Open_Access |
|
Notes |
; The authors would like to thank Sofie Thys for her technical support. The UltraVIEW VoX spinning disk confocal microscope was purchased with support of the Hercules Foundation (Hercules Type 1: AUHA 09/001 and AUHA 11/01). The authors also appreciate financial support from the European Union under the Seventh Framework Program (Integrated Infrastructure Initiative no. 262348 European Soft Matter Infrastructure, ESMI), the Fund for Scientific Research- Flanders and the Flemish Institute for Science and Technology and the Belgian government through the Interuniversity Attraction Pole Program (IAP- PAI). ; |
Approved |
Most recent IF: 3.307; 2014 IF: 2.923 |
|
Call Number |
UA @ lucian @ c:irua:122750 |
Serial |
2222 |
Permanent link to this record |
|
|
|
|
Author |
Van Eyndhoven, G.; Batenburg, K.J.; van Oers, C.; Kurttepeli, M.; Bals, S.; Cool, P.; Sijbers, J. |
|
Title |
Reliable pore-size measurements based on a procedure specifically designed for electron tomography measurements of nanoporous samples |
Type |
P3 Proceeding |
|
Year |
2014 |
Publication |
|
Abbreviated Journal |
|
|
Volume |
|
Issue |
|
Pages |
|
|
Keywords |
P3 Proceeding; Electron microscopy for materials research (EMAT); Vision lab; Laboratory of adsorption and catalysis (LADCA) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
S.l. |
Editor |
|
|
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record |
|
Impact Factor |
|
Times cited |
|
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: NA |
|
Call Number |
UA @ lucian @ c:irua:124548 |
Serial |
2866 |
Permanent link to this record |
|
|
|
|
Author |
Guerrero, A.; Heidari, H.; Ripolles, T.S.; Kovalenko, A.; Pfannmöller, M.; Bals, S.; Kauffmann, L.-D.; Bisquert, J.; Garcia-Belmonte, G. |
|
Title |
Shelf life degradation of bulk heterojunction solar cells : intrinsic evolution of charge transfer complex |
Type |
A1 Journal article |
|
Year |
2015 |
Publication |
Laser physics review |
Abbreviated Journal |
Adv Energy Mater |
|
Volume |
5 |
Issue |
5 |
Pages |
1401997 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Achievement of long-term stability of organic photovoltaics is currently one of the major topics for this technology to reach maturity. Most of the techniques used to reveal degradation pathways are destructive and/or do not allow for real-time measurements in operating devices. Here, three different, nondestructive techniques able to provide real-time information, namely, film absorbance, capacitance-voltage (C-V), and impedance spectroscopy (IS), are combined over a period of 1 year using non-accelerated intrinsic degradation conditions. It is discerned between chemical modifications in the active layer, physical processes taking place in the bulk of the blend from those at the active layer/contact interfaces. In particular, it is observed that during the ageing experiment, the main source for device performance degradation is the formation of donor-acceptor charge-transfer complex (P3HT(center dot+)-PCBM center dot-) that acts as an exciton quencher. Generation of these radical species diminishes photocurrent and reduces open-circuit voltage by the creation of electronic defect states. Conclusions extracted from absorption, C-V, and IS measurements will be further supported by a range of other techniques such as atomic force microscopy, X-ray diffraction, and dark-field imaging of scanning transmission electron microscopy on ultrathin cross-sections. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
S.l. |
Editor |
|
|
Language |
|
Wos |
000352708600013 |
Publication Date |
2014-12-12 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1614-6832; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
16.721 |
Times cited |
30 |
Open Access |
OpenAccess |
|
Notes |
287594 Sunflower; 335078 Colouratom; ECAS_Sara; (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:cannot); |
Approved |
Most recent IF: 16.721; 2015 IF: 16.146 |
|
Call Number |
c:irua:126000 |
Serial |
2994 |
Permanent link to this record |
|
|
|
|
Author |
Verheyen, E.; Jo, C.; Kurttepeli, M.; Vanbutsele, G.; Gobechiya, E.; Korányi, T.I.; Bals, S.; Van Tendeloo, G.; Ryoo, R.; Kirschhock, C.E.A.; Martens, J.A.; |
|
Title |
Molecular shape-selectivity of MFI zeolite nanosheets in n-decane isomerization and hydrocracking |
Type |
A1 Journal article |
|
Year |
2013 |
Publication |
Journal of catalysis |
Abbreviated Journal |
J Catal |
|
Volume |
300 |
Issue |
|
Pages |
70-80 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
MFI zeolite nanosheets with thickness of 2 and 8 nm were synthesized, transformed into bifunctional catalysts by loading with platinum and tested in n-decane isomerization and hydrocracking. Detailed analysis of skeletal isomers and hydrocracked products revealed that the MFI nanosheets display transition-state shape-selectivity similar to bulk MFI zeolite crystals. The suppressed formation of bulky skeletal isomers and C5 cracking products are observed both in the nanosheets and the bulk crystals grown in three dimensions. This is typical for restricted transition-state shape-selectivity, characteristic for the MFI type pores. It is a first clear example of transition-state shape-selectivity inside a zeolitic nanosheet. Owing to the short diffusion path across the sheets, expression of diffusion-based discrimination of reaction products in the MFI nanosheets was limited. The 2-methylnonane formation among monobranched C10 isomers and 2,7-dimethyloctane among dibranched C10 isomers, which in MFI zeolite are favored by product diffusion, was much less favored on the nanosheets compared to the reference bulk ZSM-5 material. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
San Diego, Calif. |
Editor |
|
|
Language |
|
Wos |
000317558000009 |
Publication Date |
2013-02-07 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0021-9517; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
6.844 |
Times cited |
121 |
Open Access |
|
|
Notes |
Methusalem; IAP; Countatoms |
Approved |
Most recent IF: 6.844; 2013 IF: 6.073 |
|
Call Number |
UA @ lucian @ c:irua:106186 |
Serial |
2181 |
Permanent link to this record |
|
|
|
|
Author |
Yalcin, A.O.; Fan, Z.; Goris, B.; Li, W.F.; Koster, R.S.; Fang, C.M.; van Blaaderen, A.; Casavola, M.; Tichelaar, F.D.; Bals, S.; Van Tendeloo, G.; Vlugt, T.J.H.; Vanmaekelbergh, D.; Zandbergen, H.W.; van Huis, M.A.; |
|
Title |
Atomic resolution monitoring of cation exchange in CdSe-PbSe heteronanocrystals during epitaxial solid-solid-vapor growth |
Type |
A1 Journal article |
|
Year |
2014 |
Publication |
Nano letters |
Abbreviated Journal |
Nano Lett |
|
Volume |
14 |
Issue |
6 |
Pages |
3661-3667 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Here, we show a novel solidsolidvapor (SSV) growth mechanism whereby epitaxial growth of heterogeneous semiconductor nanowires takes place by evaporation-induced cation exchange. During heating of PbSe-CdSe nanodumbbells inside a transmission electron microscope (TEM), we observed that PbSe nanocrystals grew epitaxially at the expense of CdSe nanodomains driven by evaporation of Cd. Analysis of atomic-resolution TEM observations and detailed atomistic simulations reveals that the growth process is mediated by vacancies. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Washington |
Editor |
|
|
Language |
|
Wos |
000337337100106 |
Publication Date |
2014-05-20 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1530-6984;1530-6992; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
12.712 |
Times cited |
42 |
Open Access |
OpenAccess |
|
Notes |
262348 Esmi; Fwo; 246791 Countatoms; 335078 Colouratom; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); |
Approved |
Most recent IF: 12.712; 2014 IF: 13.592 |
|
Call Number |
UA @ lucian @ c:irua:117027 |
Serial |
179 |
Permanent link to this record |
|
|
|
|
Author |
Liakakos, N.; Gatel, C.; Blon, T.; Altantzis, T.; Lentijo-Mozo, S.; Garcia-Marcelot, C.; Lacroix, L.M.; Respaud, M.; Bals, S.; Van Tendeloo, G.; Soulantica, K. |
|
Title |
CoFe nanodumbbells : synthesis, structure, and magnetic properties |
Type |
A1 Journal article |
|
Year |
2014 |
Publication |
Nano letters |
Abbreviated Journal |
Nano Lett |
|
Volume |
14 |
Issue |
5 |
Pages |
2747-2754 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
We report the solution phase synthesis, the structural analysis, and the magnetic properties of hybrid nanostructures combining two magnetic metals. These nano-objects are characterized by a remarkable shape, combining Fe nanocubes on Co nanorods. The topological composition, the orientation relationship, and the growth steps have been studied by advanced electron microscopy techniques, such as HRTEM, electron tomography, and state-of-the-art 3-dimensional elemental mapping by EDX tomography. The soft iron nanocubes behave as easy nucleation centers that induce the magnetization reversal of the entire nanohybrid, leading to a drastic modification of the overall effective magnetic anisotropy. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Washington |
Editor |
|
|
Language |
|
Wos |
000336074800080 |
Publication Date |
2014-04-17 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1530-6984;1530-6992; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
12.712 |
Times cited |
27 |
Open Access |
OpenAccess |
|
Notes |
The authors thank the ANR for the project “Batmag”, the French national project EMMA (ANR12 BS10 013 01), the European Commission for the FP7 NAMDIATREAM project (EU NMP4-LA-2010-246479), and the METSA network for the HRTEM. This has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative- I3). It was also supported by Programme Investissements d’Avenir under the program ANR-11-IDEX-0002-02, reference ANR-10-LABX-0037-NEXT. The authors acknowledge financial support from European Research Council (ERC Advanced Grant # 24691-COUNTATOMS and ERC Starting Grant # 335078-COLOURATOMS).; esteem2ta; ECASSara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); |
Approved |
Most recent IF: 12.712; 2014 IF: 13.592 |
|
Call Number |
UA @ lucian @ c:irua:116953 |
Serial |
377 |
Permanent link to this record |
|
|
|
|
Author |
Hutter, E.M.; Bladt, E.; Goris, B.; Pietra, F.; van der Bok, J.C.; Boneschanscher, M.P.; de Donega, C.M.; Bals, S.; Vanmaekelbergh, D. |
|
Title |
Conformal and atomic characterization of ultrathin CdSe platelets with a helical shape |
Type |
A1 Journal article |
|
Year |
2014 |
Publication |
Nano letters |
Abbreviated Journal |
Nano Lett |
|
Volume |
14 |
Issue |
11 |
Pages |
6257-6262 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Currently, ultrathin colloidal CdSe semiconductor nanoplatelets (NPLs) with a uniform thickness that is controllable up to the atomic scale can be prepared. The optical properties of these 2D semiconductor systems are the subject of extensive research. Here, we reveal their natural morphology and atomic arrangement. Using cryo-TEM (cryo-transmission electron microscopy), we show that the shape of rectangular NPLs in solution resembles a helix. Fast incorporation of these NPLs in silica preserves and immobilizes their helical shape, which allowed us to perform an in-depth study by high angle annular dark field scanning transmission electron microscopy (HAADF-STEM). Electron tomography measurements confirm and detail the helical shape of these systems. Additionally, high-resolution HAADF-STEM shows the thickness of the NPLs on the atomic scale and furthermore that these are consistently folded along a ?110? direction. The presence of a silica shell on both the top and bottom surfaces shows that Cd atoms must be accessible for silica precursor (and ligand) molecules on both sides. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Washington |
Editor |
|
|
Language |
|
Wos |
000345723800036 |
Publication Date |
2014-10-27 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1530-6984 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
12.712 |
Times cited |
43 |
Open Access |
OpenAccess |
|
Notes |
Dariusz Mitoraj, Hans Meeldijk, Relinde van Dijk-Moes, and Stephan Zevenhuizen are acknowledged for technical support and help with some experiments. The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP/2007-2013)/ERC Grant Agreement no. 291667. The authors acknowledge financial support from FOM and NOW [FOM program Functional NanoParticle Solids (FNPS)]. S.B. acknowledges financial support from European Research Council (ERC Starting Grant #335078- COLOURATOMS). E.B. and B.G. gratefully acknowledge financial support by the Flemish Fund for Scientific Research (FWO Vlaanderen).; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); |
Approved |
Most recent IF: 12.712; 2014 IF: 13.592 |
|
Call Number |
UA @ lucian @ c:irua:122209 |
Serial |
490 |
Permanent link to this record |
|
|
|
|
Author |
Evers, W.H.; Goris, B.; Bals, S.; Casavola, M.; de Graaf, J.; van Roij, R.; Dijkstra, M.; Vanmaekelbergh, D. |
|
Title |
Low-dimensional semiconductor superlattices formed by geometric control over nanocrystal attachment |
Type |
A1 Journal article |
|
Year |
2013 |
Publication |
Nano letters |
Abbreviated Journal |
Nano Lett |
|
Volume |
13 |
Issue |
6 |
Pages |
2317-2323 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Oriented attachment, the process in which nanometer-sized crystals fuse by atomic bonding of specific crystal facets, is expected to be more difficult to control than nanocrystal self-assembly that is driven by entropic factors or weak van der Waals attractions. Here, we present a study of oriented attachment of PbSe nanocrystals that counteract this tuition. The reaction was studied in a thin film of the suspension casted on an immiscible liquid at a given temperature. We report that attachment can be controlled such that it occurs with one type of facets exclusively. By control of the temperature and particle concentration we obtain one- or two-dimensional PbSe single crystals, the latter with a honeycomb or square superimposed periodicity in the nanometer range. We demonstrate the ability to convert these PbSe superstructures into other semiconductor compounds with the preservation of crystallinity and geometry. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Washington |
Editor |
|
|
Language |
|
Wos |
000320485100001 |
Publication Date |
2012-10-11 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1530-6984;1530-6992; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
12.712 |
Times cited |
206 |
Open Access |
|
|
Notes |
262348 ESMI; Hercules 3 |
Approved |
Most recent IF: 12.712; 2013 IF: 12.940 |
|
Call Number |
UA @ lucian @ c:irua:101777 |
Serial |
1847 |
Permanent link to this record |
|
|
|
|
Author |
Goris, B.; de Beenhouwer, J.; de Backer, A.; Zanaga, D.; Batenburg, K.J.; Sánchez-Iglesias, A.; Liz-Marzán, L.M.; Van Aert, S.; Bals, S.; Sijbers, J.; Van Tendeloo, G. |
|
Title |
Measuring lattice strain in three dimensions through electron microscopy |
Type |
A1 Journal article |
|
Year |
2015 |
Publication |
Nano letters |
Abbreviated Journal |
Nano Lett |
|
Volume |
15 |
Issue |
15 |
Pages |
6996-7001 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Vision lab |
|
Abstract |
The three-dimensional (3D) atomic structure of nanomaterials, including strain, is crucial to understand their properties. Here, we investigate lattice strain in Au nanodecahedra using electron tomography. Although different electron tomography techniques enabled 3D characterizations of nanostructures at the atomic level, a reliable determination of lattice strain is not straightforward. We therefore propose a novel model-based approach from which atomic coordinates are measured. Our findings demonstrate the importance of investigating lattice strain in 3D. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Washington |
Editor |
|
|
Language |
|
Wos |
000363003100108 |
Publication Date |
2015-09-04 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1530-6984;1530-6992; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
12.712 |
Times cited |
87 |
Open Access |
OpenAccess |
|
Notes |
Fwo; 335078 Colouratom; 267867 Plasmaquo; 312483 Esteem2; 262348 Esmi; esteem2jra4; ECASSara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); |
Approved |
Most recent IF: 12.712; 2015 IF: 13.592 |
|
Call Number |
c:irua:127639 c:irua:127639 |
Serial |
1965 |
Permanent link to this record |
|
|
|
|
Author |
Biermans, E.; Molina, L.; Batenburg, K.J.; Bals, S.; Van Tendeloo, G. |
|
Title |
Measuring porosity at the nanoscale by quantitative electron tomography |
Type |
A1 Journal article |
|
Year |
2010 |
Publication |
Nano letters |
Abbreviated Journal |
Nano Lett |
|
Volume |
10 |
Issue |
12 |
Pages |
5014-5019 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
|
Abstract |
Quantitative electron tomography is proposed to characterize porous materials at a nanoscale. To achieve reliable three-dimensional (3D) quantitative information, the influence of missing wedge artifacts and segmentation methods is investigated. We are presenting the Discrete Algebraic Reconstruction Algorithm as the most adequate tomography method to measure porosity at the nanoscale. It provides accurate 3D quantitative information, regardless the presence of a missing wedge. As an example, we applied our approach to nanovoids in La2Zr2O7 thin films. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Washington |
Editor |
|
|
Language |
|
Wos |
000284990900040 |
Publication Date |
2010-11-22 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1530-6984;1530-6992; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
12.712 |
Times cited |
79 |
Open Access |
|
|
Notes |
Esteem 026019 |
Approved |
Most recent IF: 12.712; 2010 IF: 12.219 |
|
Call Number |
UA @ lucian @ c:irua:87658 |
Serial |
1967 |
Permanent link to this record |
|
|
|
|
Author |
Goris, B.; Polavarapu, L.; Bals, S.; Van Tendeloo, G.; Liz-Marzán, L.M. |
|
Title |
Monitoring galvanic replacement through three-dimensional morphological and chemical mapping |
Type |
A1 Journal article |
|
Year |
2014 |
Publication |
Nano letters |
Abbreviated Journal |
Nano Lett |
|
Volume |
14 |
Issue |
6 |
Pages |
3220-3226 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Galvanic replacement reactions on metal nanoparticles are often used for the preparation of hollow nanostructures with tunable porosity and chemical composition, leading to tailored optical and catalytic properties. However, the precise interplay between the three-dimensional (3D) morphology and chemical composition of nanostructures during galvanic replacement is not always well understood as the 3D chemical imaging of nanoscale materials is still challenging. It is especially far from straightforward to obtain detailed information from the inside of hollow nanostructures using electron microscopy techniques such as SEM or TEM. We demonstrate here that a combination of state-of-the-art EDX mapping with electron tomography results in the unambiguous determination of both morphology transformation and elemental composition of nanostructures in 3D, during galvanic replacement of Ag nanocubes. This work provides direct and unambiguous experimental evidence toward understanding the galvanic replacement reaction. In addition, the powerful approach presented here can be applied to a wide range of nanoscale transformation processes, which will undoubtedly guide the development of novel nanostructures. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Washington |
Editor |
|
|
Language |
|
Wos |
000337337100038 |
Publication Date |
2014-05-05 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1530-6984;1530-6992; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
12.712 |
Times cited |
120 |
Open Access |
OpenAccess |
|
Notes |
267867 Plasmaquo; 246791 Countatoms; 335078 Colouratom; 262348 Esmi; Fwo; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); |
Approved |
Most recent IF: 12.712; 2014 IF: 13.592 |
|
Call Number |
UA @ lucian @ c:irua:116954 |
Serial |
2189 |
Permanent link to this record |
|
|
|
|
Author |
Bals, S.; Batenburg, J.; Verbeeck, J.; Sijbers, J.; Van Tendeloo, G. |
|
Title |
Quantitative three-dimensional reconstruction of catalyst particles for bamboo-like carbon nanotubes |
Type |
A1 Journal article |
|
Year |
2007 |
Publication |
Nano letters |
Abbreviated Journal |
Nano Lett |
|
Volume |
7 |
Issue |
12 |
Pages |
3669-3674 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
|
Abstract |
The three-dimensional (3D) structure and chemical composition of bamboo-like carbon nanotubes including the catalyst particles that are. used during their growth are studied by discrete electron tomography in combination with energy-filtered transmission electron microscopy. It is found that cavities are present in the catalyst particles. Furthermore, only a small percentage of the catalyst particles consist of pure Cu, since a large volume fraction of the particles is oxidized to CU(2)0. These volume fractions are determined quantitatively from 3D reconstructions obtained by discrete tomography. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Washington |
Editor |
|
|
Language |
|
Wos |
000251581600022 |
Publication Date |
2007-11-14 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1530-6984;1530-6992; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
12.712 |
Times cited |
78 |
Open Access |
|
|
Notes |
Fwo; Esteem |
Approved |
Most recent IF: 12.712; 2007 IF: 9.627 |
|
Call Number |
UA @ lucian @ c:irua:66762UA @ admin @ c:irua:66762 |
Serial |
2768 |
Permanent link to this record |
|
|
|
|
Author |
Grzelczak, M.; Sánchez-Iglesias, A.; Heidari Mezerji, H.; Bals, S.; Pérez-Juste, J.; Liz-Marzán, L.M. |
|
Title |
Steric hindrance induces crosslike self-assembly of gold nanodumbbells |
Type |
A1 Journal article |
|
Year |
2012 |
Publication |
Nano letters |
Abbreviated Journal |
Nano Lett |
|
Volume |
12 |
Issue |
8 |
Pages |
4380-4384 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
In the formation of colloidal molecules, directional interactions are crucial for controlling the spatial distribution of the building blocks. Anisotropic nanoparticles facilitate directional clustering via steric constraints imposed by each specific shape, thereby restricting assembly along certain directions. We show in this Letter that the combination of patchiness (attraction) and shape (steric hindrance) allows assembling gold nanodumbbell building blocks into crosslike dimers with well-controlled interparticle distance and relative orientation. Steric hindrance between interacting dumbbell-like particles opens up a new synthetic approach toward low-symmetry plasmonic clusters, which may significantly contribute to understand complex plasmonic phenomena. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Washington |
Editor |
|
|
Language |
|
Wos |
000307211000081 |
Publication Date |
2012-07-05 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1530-6984;1530-6992; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
12.712 |
Times cited |
85 |
Open Access |
|
|
Notes |
Nanodirect 213948-2; 262348 Esmi |
Approved |
Most recent IF: 12.712; 2012 IF: 13.025 |
|
Call Number |
UA @ lucian @ c:irua:101900 |
Serial |
3161 |
Permanent link to this record |
|
|
|
|
Author |
Bals, S.; Casavola, M.; van Huis, M.A.; Van Aert, S.; Batenburg, K.J.; Van Tendeloo, G.; Vanmaekelbergh, D. |
|
Title |
Three-dimensional atomic imaging of colloidal core-shell nanocrystals |
Type |
A1 Journal article |
|
Year |
2011 |
Publication |
Nano letters |
Abbreviated Journal |
Nano Lett |
|
Volume |
11 |
Issue |
8 |
Pages |
3420-3424 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
|
Abstract |
Colloidal coreshell semiconductor nanocrystals form an important class of optoelectronic materials, in which the exciton wave functions can be tailored by the atomic configuration of the core, the interfacial layers, and the shell. Here, we provide a trustful 3D characterization at the atomic scale of a free-standing PbSe(core)CdSe(shell) nanocrystal by combining electron microscopy and discrete tomography. Our results yield unique insights for understanding the process of cation exchange, which is widely employed in the synthesis of coreshell nanocrystals. The study that we present is generally applicable to the broad range of colloidal heteronanocrystals that currently emerge as a new class of materials with technological importance. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication ![sorted by Place of Publication field, ascending order (up)](img/sort_asc.gif) |
Washington |
Editor |
|
|
Language |
|
Wos |
000293665600062 |
Publication Date |
2011-07-25 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1530-6984;1530-6992; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
12.712 |
Times cited |
121 |
Open Access |
|
|
Notes |
Esteem 026019; Fwo |
Approved |
Most recent IF: 12.712; 2011 IF: 13.198 |
|
Call Number |
UA @ lucian @ c:irua:91263 |
Serial |
3643 |
Permanent link to this record |