| Home | << 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 >> |
|
| Records | |||||
|---|---|---|---|---|---|
| Author | Nicolas-Boluda, A.; Yang, Z.; Dobryden, I.; Carn, F.; Winckelmans, N.; Pechoux, C.; Bonville, P.; Bals, S.; Claesson, P.M.; Gazeau, F.; Pileni, M.P. | ||||
| Title | Intracellular fate of hydrophobic nanocrystal self-assemblies in tumor cells | Type | A1 Journal article | ||
| Year | 2020 | Publication | Advanced Functional Materials | Abbreviated Journal | Adv Funct Mater |
| Volume | 30 | Issue | 40 | Pages | 2004274-15 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Control of interactions between nanomaterials and cells remains a biomedical challenge. A strategy is proposed to modulate the intralysosomal distribution of nanoparticles through the design of 3D suprastructures built by hydrophilic nanocrystals (NCs) coated with alkyl chains. The intracellular fate of two water-dispersible architectures of self-assembled hydrophobic magnetic NCs: hollow deformable shells (colloidosomes) or solid fcc particles (supraballs) is compared. These two self-assemblies display increased cellular uptake by tumor cells compared to dispersions of the water-soluble NC building blocks. Moreover, the self-assembly structures increase the NCs density in lysosomes and close to the lysosome membrane. Importantly, the structural organization of NCs in colloidosomes and supraballs are maintained in lysosomes up to 8 days after internalization, whereas initially dispersed hydrophilic NCs are randomly aggregated. Supraballs and colloidosomes are differently sensed by cells due to their different architectures and mechanical properties. Flexible and soft colloidosomes deform and spread along the biological membranes. In contrast, the more rigid supraballs remain spherical. By subjecting the internalized suprastructures to a magnetic field, they both align and form long chains. Overall, it is highlighted that the mechanical and topological properties of the self-assemblies direct their intracellular fate allowing the control intralysosomal density, ordering, and localization of NCs. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000559913300001 | Publication Date | 2020-08-27 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1616-301x | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 19 | Times cited | 11 | Open Access | Not_Open_Access |
Notes  |
; F.G. and M.P.P. contributed equally to this work. Dr. J. Teixeira from Laboratoire Leon Brillouin CEA Saclay is thanked for fruitful discussions on SAXS measurement. Dr. J.M. Guinier is thanked for cryoTEM experiments. A.N.-B. received a Ph.D. fellowship from the Institute thematique multi-organismes (ITMO) Cancer and the doctoral school Frontieres du Vivant (FdV)-Programme Bettencourt and the Fondation ARC pour la recherche sur le cancer. ; | Approved | Most recent IF: 19; 2020 IF: 12.124 | ||
| Call Number | UA @ admin @ c:irua:171145 | Serial | 6551 | ||
| Permanent link to this record | |||||
| Author | Hamidi-Asl, E.; Dardenne, F.; Blust, R.; De Wael, K. | ||||
| Title | An improved electrochemical aptasensor for chloramphenicol detection based on aptamer incorporated gelatine | Type | A1 Journal article | ||
| Year | 2015 | Publication | Sensors | Abbreviated Journal | Sensors-Basel |
| Volume | 15 | Issue | 4 | Pages | 7605-7618 |
| Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
| Abstract | Because of the biocompatible properties of gelatine and the good affinity of aptamers for their targets, the combination of aptamer and gelatine type B is reported as promising for the development of biosensing devices. Here, an aptamer for chloramphenicol (CAP) is mixed with different types of gelatine and dropped on the surface of disposable gold screen printed electrodes. The signal of the CAP reduction is investigated using differential pulse voltammetry. The diagnostic performance of the sensor is described and a detection limit of 1.83 x 10(-10) M is found. The selectivity and the stability of the aptasensor are studied and compared to those of other CAP sensors described in literature. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000354236100025 | Publication Date | 2015-03-27 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1424-8220 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.677 | Times cited | 21 | Open Access | |
| Notes |
; Ezat Hamidi-Asl was financially supported by IOF-POC (University of Antwerp). ; | Approved | Most recent IF: 2.677; 2015 IF: 2.245 | ||
| Call Number | UA @ admin @ c:irua:126071 | Serial | 5464 | ||
| Permanent link to this record | |||||
| Author | Hamidi-Asl, E.; Dardenne, F.; Pilehvar, S.; Blust, R.; De Wael, K. | ||||
| Title | Unique properties of core shell Ag@Au nanoparticles for the aptasensing of bacterial cells | Type | A1 Journal article | ||
| Year | 2016 | Publication | Chemosensors | Abbreviated Journal | |
| Volume | 4 | Issue | 3 | Pages | 16 |
| Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
| Abstract | In this article, it is shown that the efficiency of an electrochemical aptasensing device is influenced by the use of different nanoparticles (NPs) such as gold nanoparticles (Au), silver nanoparticles (Ag), hollow gold nanospheres (HGN), hollow silver nanospheres (HSN), silvergold core shell (Ag@Au), goldsilver core shell (Au@Ag), and silvergold alloy nanoparticles (Ag/Au). Among these nanomaterials, Ag@Au core shell NPs are advantageous for aptasensing applications because the core improves the physical properties and the shell provides chemical stability and biocompatibility for the immobilization of aptamers. Self-assembly of the NPs on a cysteamine film at the surface of a carbon paste electrode is followed by the immobilization of thiolated aptamers at these nanoframes. The nanostructured (Ag@Au) aptadevice for Escherichia coli as a target shows four times better performance in comparison to the response obtained at an aptamer modified planar gold electrode. A comparison with other (core shell) NPs is performed by cyclic voltammetry and differential pulse voltammetry. Also, the selectivity of the aptasensor is investigated using other kinds of bacteria. The synthesized NPs and the morphology of the modified electrode are characterized by UV-Vis absorption spectroscopy, scanning electron microscopy, energy dispersive X-ray analysis, and electrochemical impedance spectroscopy. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000382480000006 | Publication Date | 2016-08-29 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2227-9040 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | 9 | Open Access | ||
| Notes |
; Ezat Hamidi-Asl was financially supported by Belspo (University of Antwerp). The authors are thankful to Femke De Croock for her technical support and to Stanislav Trashin for his worthwhile comments on the manuscript. ; | Approved | Most recent IF: NA | ||
| Call Number | UA @ admin @ c:irua:135411 | Serial | 5886 | ||
| Permanent link to this record | |||||
| Author | Cherigui, E.A.M.; Şentosun, K.; Mamme, M.H.; Lukaczynska, M.; Terryn, H.; Bals, S.; Ustarroz, J. | ||||
| Title | On the control and effect of water content during the electrodeposition of Ni nanostructures from deep eutectic solvents | Type | A1 Journal article | ||
| Year | 2018 | Publication | The journal of physical chemistry: C : nanomaterials and interfaces | Abbreviated Journal | J Phys Chem C |
| Volume | 122 | Issue | 122 | Pages | 23129-23142 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The electrodeposition of nickel nanostructures on glassy carbon was investigated in 1:2 choline chloride urea deep eutectic solvent (DES) containing different amounts of water. By combining electrochemical techniques, with ex situ field emission scanning electron microscopy, high-angle annular dark field scanning transmission electron microscopy, and energy-dispersive X-ray spectroscopy, the effect of water content on the electrochemical processes occurring during nickel deposition was better understood. At highly negative potentials and depending on water content, Ni growth is halted due to water splitting and formation of a mixed layer of Ni/NiOx(OH)(2(1-x)(ads)). Moreover, under certain conditions, the DES components can also be (electro)chemically reduced at the electrode surface, blocking further three-dimensional growth of the Ni NPs. Hence, a two-dimensional crystalline Ni-containing network can be formed in the interparticle region. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Washington, D.C. | Editor | ||
| Language | Wos | 000447471700038 | Publication Date | 2018-09-18 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1932-7447; 1932-7455 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.536 | Times cited | 27 | Open Access | OpenAccess |
| Notes |
; E.A.M.C. and M.H.M. acknowledge funding from the Fonds Wetenschappelijk Onderzoek in Flanders (FWO, research project G019014N). S.B. acknowledges funding from the European Research Council (Starting Grant No. COLOURATOMS 335078). Finally, J.U. acknowledges funding from the Fonds Wetenschappelijk Onderzoek in Flanders (FWO, postdoctoral grant 12I7816N). ; ecas_sara | Approved | Most recent IF: 4.536 | ||
| Call Number | UA @ lucian @ c:irua:154731 | Serial | 5121 | ||
| Permanent link to this record | |||||
| Author | Siriwardane, E.M.D.; Demiroglu, I.; Sevik, C.; Peeters, F.M.; Çakir, D. | ||||
| Title | Assessment of sulfur-functionalized MXenes for li-ion battery applications | Type | A1 Journal article | ||
| Year | 2020 | Publication | Journal Of Physical Chemistry C | Abbreviated Journal | J Phys Chem C |
| Volume | 124 | Issue | 39 | Pages | 21293-21304 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT) | ||||
| Abstract | The surface termination of MXenes greatly determines the electrochemical properties and ion kinetics on their surfaces. So far, hydroxyl-, oxygen-, and fluorine-terminated MXenes have been widely studied for energy storage applications. Recently, sulfur-functionalized MXene structures, which possess low diffusion barriers, have been proposed as candidate materials to enhance battery performance. We performed first-principles calculations on the structural, stability, electrochemical, and ion dynamic properties of Li-adsorbed sulfur-functionalized groups 3B, 4B, 5B, and 6B transition-metal (M)-based MXenes (i.e., M2CS2 with M = Sc, Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, and W). We performed phonon calculations, which indicated that all of the above M2CS2 MXenes, except for Sc, are dynamically stable at T = 0 K. The ground-state structure of each M2CS2 monolayer depends on the type of M atom. For instance, while sulfur prefers to sit at the FCC site on Ti2CS2, it occupies the HCP site of Cr-based MXene. We determined the Li adsorption configurations at different concentrations using the cluster expansion method. The highest maximum open-circuit voltages were computed for the group 4B element (i.e., Ti, Zr, and Hf)-based M2CS2, which are larger than 2.1 V, while their average voltages are approximately 1 V. The maximum voltage for the group 6B element (i.e., Cr, Mo, W)-based M2CS2 is less than 1 V, and the average voltage is less than 0.71 V. We found that S functionalization is helpful for capacity improvements over the O-terminated MXenes. In this respect, the computed storage gravimetric capacity may reach up to 417.4 mAh/g for Ti2CS2 and 404.5 mAh/g for V2CS2. Ta-, Cr-, Mo-, and W-based M2CS2 MXenes show very low capacities, which are less than 100 mAh/g. The Li surface diffusion energy barriers for all of the considered MXenes are less than 0.22 eV, which is favorable for high charging and discharging rates. Finally, ab initio molecular dynamic simulations performed at 400 K and bond-length analysis with respect to Li concentration verify that selected promising systems are robust against thermally induced perturbations that may induce structural transformations or distortions and undesirable Li release. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000577151900008 | Publication Date | 2020-09-01 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1932-7447; 1932-7455 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.7 | Times cited | 24 | Open Access | |
| Notes |
; Computational resources were provided by the HPC infrastructure of the University of Antwerp (CalcUA), a division of the Flemish Supercomputer Center (VSC), which is funded by the Hercules Foundation. This work was supported, in part, by The Scientific and Technological Research Council of Turkey (TUBITAK) under contract no. 118F512 and the Air Force Office of Scientific Research under award no. FA9550-19-1-7048. This work was performed in part at the Center for Nanoscale Materials, a U.S. Department of Energy Office of Science User. Use of the Center for Nanoscale Materials, an Office of Science user facility, was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under contract no. DE-AC02-06CH11357. This work was supported, in part, by The Scientific and Technological Research Council of Turkey (TUBITAK) under contract no. 118C026. ; | Approved | Most recent IF: 3.7; 2020 IF: 4.536 | ||
| Call Number | UA @ admin @ c:irua:172693 | Serial | 6452 | ||
| Permanent link to this record | |||||
| Author | Fedoseeva, Y.V.; Orekhov, A.S.; Chekhova, G.N.; Koroteev, V.O.; Kanygin, M.A.; Seovskiy, B.V.; Chuvilin, A.; Pontiroli, D.; Ricco, M.; Bulusheva, L.G.; Okotrub, A.V. | ||||
| Title | Single-walled carbon nanotube reactor for redox transformation of mercury dichloride | Type | A1 Journal article | ||
| Year | 2017 | Publication | ACS nano | Abbreviated Journal | Acs Nano |
| Volume | 11 | Issue | 9 | Pages | 8643-8649 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | <script type='text/javascript'>document.write(unpmarked('Single-walled carbon nanotubes (SWCNTs) possessing a confined inner space protected by chemically resistant shells are promising for delivery, storage, and desorption of various compounds, as well as carrying out specific reactions. Here, we show that SWCNTs interact with molten mercury dichloride (HgCl2) and guide its transformation into dimercury dichloride (Hg2Cl2) in the cavity. The chemical state of host SWCNTs remains almost unchanged except for a small p-doping from the guest Hg2Cl2 nanocrystals. The density functional theory calculations reveal that the encapsulated HgCl2 molecules become negatively charged and start interacting via chlorine bridges when local concentration increases. This reduces the bonding strength in HgCl2, which facilitates removal of chlorine, finally leading to formation of Hg2Cl2 species. The present work demonstrates that SWCNTs not only serve as a template for growing nanocrystals but also behave as an electron-transfer catalyst in the spatially confined redox reaction by donation of electron density for temporary use by the guests.')); | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000411918200012 | Publication Date | 2017-08-07 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1936-0851 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 13.942 | Times cited | 11 | Open Access | Not_Open_Access |
| Notes |
; Collaboration between partner institutions was partially supported by European FP7 IRSES project 295180. We are grateful to the bilateral Program “Russian-German Laboratory at BESSY II” for the assistance in XPS and NEXAFS measurements. We acknowledge C. Tollan for proofreading the manuscript. We are grateful to Dr. Y.V. Shubin for XRD measurements of graphite with HgCl<INF>2</ INF>. ; | Approved | Most recent IF: 13.942 | ||
| Call Number | UA @ lucian @ c:irua:146770 | Serial | 4895 | ||
| Permanent link to this record | |||||
| Author | Khaletskaya, K.; Turner, S.; Tu, M.; Wannapaiboon, S.; Schneemann, A.; Meyer, R.; Ludwig, A.; Van Tendeloo, G.; Fischer, R.A. | ||||
| Title | Self-directed localization of ZIF-8 thin film formation by conversion of ZnO nanolayers | Type | A1 Journal article | ||
| Year | 2014 | Publication | Advanced functional materials | Abbreviated Journal | Adv Funct Mater |
| Volume | 24 | Issue | 30 | Pages | 4804-4811 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Control of localized metal-organic framework (MOF) thin film formation is a challenge. Zeolitic imidazolate frameworks (ZIFs) are an important sub-class of MOFs based on transition metals and imidazolate linkers. Continuous coatings of intergrown ZIF crystals require high rates of heterogeneous nucleation. In this work, substrates coated with zinc oxide layers are used, obtained by atomic layer deposition (ALD) or by magnetron sputtering, to provide the Zn2+ ions required for nucleation and localized growth of ZIF-8 films ([Zn(mim)(2)]; Hmim = 2-methylimidazolate). The obtained ZIF-8 films reveal the expected microporosity, as deduced from methanol adsorption studies using an environmentally controlled quartz crystal microbalance (QCM) and comparison with bulk ZIF-8 reference data. The concept is transferable to other MOFs, and is applied to the formation of [Al(OH)(1,4-ndc)](n) (ndc = naphtalenedicarboxylate) thin films derived from Al2O3 nanolayers. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000340549900010 | Publication Date | 2014-05-07 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1616-301X; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 12.124 | Times cited | 77 | Open Access | |
| Notes |
312483 Esteem2; Fwo; esteem2_ta | Approved | Most recent IF: 12.124; 2014 IF: 11.805 | ||
| Call Number | UA @ lucian @ c:irua:119215 | Serial | 2975 | ||
| Permanent link to this record | |||||
| Author | Guzzinati, G.; Clark, L.; Béché, A.; Juchtmans, R.; Van Boxem, R.; Mazilu, M.; Verbeeck, J. | ||||
| Title | Prospects for versatile phase manipulation in the TEM : beyond aberration correction | Type | A1 Journal article | ||
| Year | 2015 | Publication | Ultramicroscopy | Abbreviated Journal | Ultramicroscopy |
| Volume | 151 | Issue | 151 | Pages | 85-93 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | In this paper we explore the desirability of a transmission electron microscope in which the phase of the electron wave can be freely controlled. We discuss different existing methods to manipulate the phase of the electron wave and their limitations. We show how with the help of current techniques the electron wave can already be crafted into specific classes of waves each having their own peculiar properties. Assuming a versatile phase modulation device is feasible, we explore possible benefits and methods that could come into existence borrowing from light optics where the so-called spatial light modulators provide programmable phase plates for quite some time now. We demonstrate that a fully controllable phase plate building on Harald Rose׳s legacy in aberration correction and electron optics in general would open an exciting field of research and applications. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Amsterdam | Editor | ||
| Language | Wos | 000351237800012 | Publication Date | 2014-10-22 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0304-3991; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.843 | Times cited | 19 | Open Access | |
| Notes |
278510 Vortex; Fwo; 312483 Esteem2; esteem2jra2; esteem2jra3 ECASJO_; | Approved | Most recent IF: 2.843; 2015 IF: 2.436 | ||
| Call Number | c:irua:121405 c:irua:121405UA @ admin @ c:irua:121405 | Serial | 2731 | ||
| Permanent link to this record | |||||
| Author | Yalcin, A.O.; Goris, B.; van Dijk-Moes, R.J.A.; Fan, Z.; Erdamar, A.K.; Tichelaar, F.D.; Vlugt, T.J.H.; Van Tendeloo, G.; Bals, S.; Vanmaekelbergh, D.; Zandbergen, H.W.; van Huis, M.A.; | ||||
| Title | Heat-induced transformation of CdSe-CdS-ZnS coremultishell quantum dots by Zn diffusion into inner layers | Type | A1 Journal article | ||
| Year | 2015 | Publication | Chemical communications | Abbreviated Journal | Chem Commun |
| Volume | 51 | Issue | 51 | Pages | 3320-3323 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | In this work, we investigate the thermal evolution of CdSeCdSZnS coremultishell quantum dots (QDs) in situ using transmission electron microscopy (TEM). Starting at a temperature of approximately 250 °C, Zn diffusion into inner layers takes place together with simultaneous evaporation of particularly Cd and S. As a result of this transformation, CdxZn1−xSeCdyZn1−yS coreshell QDs are obtained. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | London | Editor | ||
| Language | Wos | 000349325000004 | Publication Date | 2014-11-21 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-7345;1364-548X; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 6.319 | Times cited | 21 | Open Access | OpenAccess |
| Notes |
262348 Esmi; Fwo; 246791 Countatoms; 335078 Colouratom; ECAS_Sara; (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:cannot); | Approved | Most recent IF: 6.319; 2015 IF: 6.834 | ||
| Call Number | c:irua:132582 | Serial | 1412 | ||
| Permanent link to this record | |||||
| Author | Yalcin, A.O.; Fan, Z.; Goris, B.; Li, W.F.; Koster, R.S.; Fang, C.M.; van Blaaderen, A.; Casavola, M.; Tichelaar, F.D.; Bals, S.; Van Tendeloo, G.; Vlugt, T.J.H.; Vanmaekelbergh, D.; Zandbergen, H.W.; van Huis, M.A.; | ||||
| Title | Atomic resolution monitoring of cation exchange in CdSe-PbSe heteronanocrystals during epitaxial solid-solid-vapor growth | Type | A1 Journal article | ||
| Year | 2014 | Publication | Nano letters | Abbreviated Journal | Nano Lett |
| Volume | 14 | Issue | 6 | Pages | 3661-3667 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Here, we show a novel solidsolidvapor (SSV) growth mechanism whereby epitaxial growth of heterogeneous semiconductor nanowires takes place by evaporation-induced cation exchange. During heating of PbSe-CdSe nanodumbbells inside a transmission electron microscope (TEM), we observed that PbSe nanocrystals grew epitaxially at the expense of CdSe nanodomains driven by evaporation of Cd. Analysis of atomic-resolution TEM observations and detailed atomistic simulations reveals that the growth process is mediated by vacancies. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Washington | Editor | ||
| Language | Wos | 000337337100106 | Publication Date | 2014-05-20 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1530-6984;1530-6992; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 12.712 | Times cited | 42 | Open Access | OpenAccess |
| Notes |
262348 Esmi; Fwo; 246791 Countatoms; 335078 Colouratom; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); | Approved | Most recent IF: 12.712; 2014 IF: 13.592 | ||
| Call Number | UA @ lucian @ c:irua:117027 | Serial | 179 | ||
| Permanent link to this record | |||||
| Author | Turner, S.; Shenderova, O.; da Pieve, F.; Lu, Y.-G.; Yücelen, E.; Verbeeck, J.; Lamoen, D.; Van Tendeloo, G. | ||||
| Title | Aberration-corrected microscopy and spectroscopy analysis of pristine, nitrogen containing detonation nanodiamond | Type | A1 Journal article | ||
| Year | 2013 | Publication | Physica status solidi : A : applications and materials science | Abbreviated Journal | Phys Status Solidi A |
| Volume | 210 | Issue | 10 | Pages | 1976-1984 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Aberration-corrected transmission electron microscopy, electron energy-loss spectroscopy, and density functional theory (DFT) calculations are used to solve several key questions about the surface structure, the particle morphology, and the distribution and nature of nitrogen impurities in detonation nanodiamond (DND) cleaned by a recently developed ozone treatment. All microscopy and spectroscopy measurements are performed at a lowered acceleration voltage (80/120kV), allowing prolonged and detailed experiments to be carried out while minimizing the risk of knock-on damage or surface graphitization of the nanodiamond. High-resolution TEM (HRTEM) demonstrates the stability of even the smallest nanodiamonds under electron illumination at low voltage and is used to image the surface structure of pristine DND. High resolution electron energy-loss spectroscopy (EELS) measurements on the fine structure of the carbon K-edge of nanodiamond demonstrate that the typical * pre-peak in fact consists of three sub-peaks that arise from the presence of, amongst others, minimal fullerene-like reconstructions at the nanoparticle surfaces and deviations from perfect sp(3) coordination at defects in the nanodiamonds. Spatially resolved EELS experiments evidence the presence of nitrogen within the core of DND particles. The nitrogen is present throughout the whole diamond core, and can be enriched at defect regions. By comparing the fine structure of the experimental nitrogen K-edge with calculated energy-loss near-edge structure (ELNES) spectra from DFT, the embedded nitrogen is most likely related to small amounts of single substitutional and/or A-center nitrogen, combined with larger nitrogen clusters. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000329299700025 | Publication Date | 2013-10-18 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1862-6300; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 1.775 | Times cited | 37 | Open Access | |
| Notes |
262348 ESMI; 246791 COUNTATOMS; FWO; Hercules; GOA XANES meets ELNES | Approved | Most recent IF: 1.775; 2013 IF: 1.525 | ||
| Call Number | UA @ lucian @ c:irua:110821UA @ admin @ c:irua:110821 | Serial | 41 | ||
| Permanent link to this record | |||||
| Author | Lamas, J.S.; Leroy, W.P.; Lu, Y.-G.; Verbeeck, J.; Van Tendeloo, G.; Depla, D. | ||||
| Title | Using the macroscopic scale to predict the nano-scale behavior of YSZ thin films | Type | A1 Journal article | ||
| Year | 2014 | Publication | Surface and coatings technology | Abbreviated Journal | Surf Coat Tech |
| Volume | 238 | Issue | Pages | 45-50 | |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | In this work, Yttria-stabilized zirconia (YSZ) thin films were deposited using dual reactive magnetron sputtering. By varying the deposition conditions, the film morphology and texture of the thin films are tuned and biaxial alignment is obtained. Studying the crystallographic and microstructural properties of the YSZ thin films, a tilted columnar growth was identified. This tilt is shown to be dependent on the compositional gradient of the sample. The variation of composition within a single YSZ column measured via STEM-EDX is demonstrated to be equal to the macroscopic variation on a full YSZ sample when deposited under the same deposition parameters. A simple stress model was developed to predict the tilt of the growing columns. The results indicate that this model not only determines the column bending of the growing film but also confirms that a macroscopic approach is sufficient to determine the compositional gradient in a single column of the YSZ thin films. (C) 2013 Elsevier B.V. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Lausanne | Editor | ||
| Language | Wos | 000331028200005 | Publication Date | 2013-10-29 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0257-8972; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.589 | Times cited | 8 | Open Access | |
| Notes |
246791 Countatoms; 278510 Vortex;Nmp3-La-2010-246102 Ifox; 312483 Esteem2; esteem2jra3 ECASJO; | Approved | Most recent IF: 2.589; 2014 IF: 1.998 | ||
| Call Number | UA @ lucian @ c:irua:115765 | Serial | 3827 | ||
| Permanent link to this record | |||||
| Author | Quintana, M.; López, A.M.; Rapino, S.; Toma, F.M.; Iurlo, M.; Carraro, M.; Sartorel, A.; Maccato, C.; Ke, X.; Bittencourt, C.; Da Ros, T.; Van Tendeloo, G.; Marcaccio, M.; Paolucci, F.; Prato, M.; Bonchio, M.; | ||||
| Title | Knitting the catalytic pattern of artificial photosynthesis to a hybrid graphene nanotexture | Type | A1 Journal article | ||
| Year | 2013 | Publication | ACS nano | Abbreviated Journal | Acs Nano |
| Volume | 7 | Issue | 1 | Pages | 811-817 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The artificial leaf project calls for new materials enabling multielectron catalysis with minimal overpotential, high turnover frequency, and long-term stability. Is graphene a better material than carbon nanotubes to enhance water oxidation catalysis for energy applications? Here we show that functionalized graphene with a tailored distribution of polycationic, quaternized, ammonium pendants provides an sp(2) carbon nanoplatform to anchor a totally inorganic tetraruthenate catalyst, mimicking the oxygen evolving center of natural PSII. The resulting hybrid material displays oxygen evolution at overpotential as low as 300 mV at neutral pH with negligible loss of performance after 4 h testing. This multilayer electroactive asset enhances the turnover frequency by 1 order of magnitude with respect to the isolated catalyst, and provides a definite up-grade of the carbon nanotube material, with a similar surface functionalization. Our innovation is based on a noninvasive, synthetic protocol for graphene functionalization that goes beyond the ill-defined oxidation-reduction methods, allowing a definite control of the surface properties. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000314082800088 | Publication Date | 2012-12-17 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1936-0851;1936-086X; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 13.942 | Times cited | 69 | Open Access | |
| Notes |
246791 COUNTATOMS; 262348 ESMI; ESF Cost Action NanoTP MP0901 | Approved | Most recent IF: 13.942; 2013 IF: 12.033 | ||
| Call Number | UA @ lucian @ c:irua:107707 | Serial | 1766 | ||
| Permanent link to this record | |||||
| Author | Dendooven, J.; Devloo-Casier, K.; Ide, M.; Grandfield; Kurttepeli; Ludwig, K.F.; Bals, S.; Van der Voort, P.; Detavernier, C. | ||||
| Title | Atomic layer deposition-based tuning of the pore size in mesoporous thin films studied by in situ grazing incidence small angle X-ray scattering | Type | A1 Journal article | ||
| Year | 2014 | Publication | Nanoscale | Abbreviated Journal | Nanoscale |
| Volume | 6 | Issue | 24 | Pages | 14991-14998 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Atomic layer deposition (ALD) enables the conformal coating of porous materials, making the technique suitable for pore size tuning at the atomic level, e.g., for applications in catalysis, gas separation and sensing. It is, however, not straightforward to obtain information about the conformality of ALD coatings deposited in pores with diameters in the low mesoporous regime (<10 nm). In this work, it is demonstrated that in situ synchrotron based grazing incidence small angle X-ray scattering (GISAXS) can provide valuable information on the change in density and internal surface area during ALD of TiO2 in a porous titania film with small mesopores (3-8 nm). The results are shown to be in good agreement with in situ X-ray fluorescence data representing the evolution of the amount of Ti atoms deposited in the porous film. Analysis of both datasets indicates that the minimum pore diameter that can be achieved by ALD is determined by the size of the Ti-precursor molecule. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Cambridge | Editor | ||
| Language | Wos | 000345458200051 | Publication Date | 2014-10-13 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2040-3364;2040-3372; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 7.367 | Times cited | 41 | Open Access | OpenAccess |
| Notes |
239865 Cocoon; 335078 Colouratom; Fwo; ECAS_Sara; (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:cannot); | Approved | Most recent IF: 7.367; 2014 IF: 7.394 | ||
| Call Number | UA @ lucian @ c:irua:122227 | Serial | 169 | ||
| Permanent link to this record | |||||
| Author | Vávra, O.; Gaži, S.; Golubović, D.S.; Vávra, I.; Dérer, J.; Verbeeck, J.; Van Tendeloo, G.; Moshchalkov, V.V. | ||||
| Title | 0 and π phase Josephson coupling through an insulating barrier with magnetic impurities | Type | A1 Journal article | ||
| Year | 2006 | Publication | Physical review : B : condensed matter and materials physics | Abbreviated Journal | Phys Rev B |
| Volume | 74 | Issue | 2 | Pages | 020502 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | We have studied the temperature and field dependencies of the critical current I(C) in the Nb-Fe(0.1)Si(0.9)-Nb Josephson junction with a tunneling barrier formed by a paramagnetic insulator. We demonstrate that in these junctions coexistence of both the 0 and the pi states within one tunnel junction occurs, and leads to the appearance of a sharp cusp in the temperature dependence I(C)(T), similar to the I(C)(T) cusp found for the 0-pi transition in metallic pi junctions. This cusp is not related to the 0-pi temperature-induced transition itself, but is caused by the different temperature dependencies of the opposing 0 and pi supercurrents through the barrier. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Lancaster, Pa | Editor | ||
| Language | Wos | 000239426600010 | Publication Date | 2006-07-15 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1098-0121;1550-235X; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.836 | Times cited | 27 | Open Access | |
| Notes |
Approved | Most recent IF: 3.836; 2006 IF: 3.107 | |||
| Call Number | UA @ lucian @ c:irua:60087 c:irua:60087 c:irua:60087 c:irua:60087UA @ admin @ c:irua:60087 | Serial | 1 | ||
| Permanent link to this record | |||||
| Author | Lubyshev, D.; Fastenau, J.M.; Fang, X.-M.; Wu, Y.; Doss, C.; Snyder, A.; Liu, W.K.; Lamb, M.S.M.; Bals, S.; Song, C. | ||||
| Title | Comparison of As- and P-based metamorphic buffers for high performance InP heterojunction bipolar transistor and high electron mobility transistor applications | Type | A1 Journal article | ||
| Year | 2004 | Publication | Journal of vacuum science & technology. B. Microelectronics and nanometer structures. Processing, measurement and phenomena | Abbreviated Journal | |
| Volume | 22 | Issue | 3 | Pages | 1565-1569 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Metamorphic buffers (M-buffers) consisting of graded InAlAs or bulk InP were employed for the production of InP-based epiwafers on GaAs substrates by molecular-beam epitaxy. The graded InAlAs is the standard for production metamorphic high electron mobility transistors (M-HEMTs), while the bulk InP offers superior thermal properties for higher current density circuits. The surface morphology and crystal structure of the two M-buffers showed different relaxation mechanisms. The graded InAlAs gave a cross-hatched pattern with nearly full relaxation and very effective dislocation filtering, while the bulk InP had a uniform isotropic surface with dislocations propagating further up towards the active layers. Both types of M-buffers had atomic force microscopy root-mean-square roughness values around 2030 Å. The Hall transport properties of high electron mobility transistors (HEMTs) grown on the InAlAs M-buffer, and a baseline HEMT grown lattice matched on InP, both had room-temperature mobilities >10 000 cm2/V s, while the M-HEMT on the InP M-buffer showed a decrease to 9000 cm2/V s. Similarly, the dc parameters of a double heterojunction bipolar transistor (DHBT) grown on the InAlAs M-buffer were much closer to the baseline heterojunction bipolar transistor than a DHBT grown on the InP M-buffer. A high breakdown voltage of 11.3 V was achieved on an M-DHBT with the InAlAs M-buffer. We speculate that the degradation in device characteristics on the InP M-buffer was related to the incomplete dislocation filtering. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Woodbury, N.Y. | Editor | ||
| Language | Wos | 000222481400141 | Publication Date | 2004-07-08 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0734-211X; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | 25 | Open Access | ||
| Notes |
Approved | Most recent IF: NA | |||
| Call Number | UA @ lucian @ c:irua:87596 | Serial | 427 | ||
| Permanent link to this record | |||||
| Author | Blumenau, A.T.; Frauenheim, T.; Öberg, S.; Willems, B.; Van Tendeloo, G. | ||||
| Title | Dislocation structures in diamond: density-functional based modelling and high resolution electron microscopy | Type | MA1 Book as author | ||
| Year | 2004 | Publication | Abbreviated Journal | ||
| Volume | Issue | Pages | |||
| Keywords | MA1 Book as author; Electron microscopy for materials research (EMAT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Trans Tech Publications | Place of Publication | s.l. | Editor | |
| Language | Wos | Publication Date | 0000-00-00 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | ||
| Impact Factor | Times cited | Open Access | |||
| Notes |
Approved | Most recent IF: NA | |||
| Call Number | UA @ lucian @ c:irua:54872 | Serial | 732 | ||
| Permanent link to this record | |||||
| Author | Musolino, N.; Bals, S.; Van Tendeloo, G.; Clayton, N.; Walker, E.; Flukiger, R. | ||||
| Title | Investigation of (Bi,Pb)2212 crystals : observation of modulation-free phase | Type | A1 Journal article | ||
| Year | 2004 | Publication | Physica: C : superconductivity | Abbreviated Journal | Physica C |
| Volume | 401 | Issue | 1-4 | Pages | 270-272 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | We report the complete disappearance of the structural modulation in heavily lead-doped Bi2-xPbxSr2CaCu2O8+delta crystals observed by transmission electron microscopy. Crystals with a nominal lead content of x = 0.8, corresponding to an effective lead content of x = 0.39, yield the non-modulated phase. The superconducting properties of this modulation-free phase (beta phase) have been studied and compared to those of undoped crystals displaying the modulated phase (alpha phase). Magnetisation measurements reveal that the irreversibility field H-irr(T) and relaxation rates are strongly improved within the beta phase. Measurements of the lower critical field, H-cl, show that the anisotropy factor, E, is considerably reduced in the modulation-free crystals. This is the signature of stronger coupling between CuO2 layers which in turn deeply influences the effectiveness of the pinning. These measurements explain the enhanced pinning properties in moderately Pb-doped crystals in which the a phase and P phase coexist. The enhanced pinning is not only due to the alpha/beta interfaces, which act as effective pinning centers: the emergence of modulation-free domains, characterized by a strongly reduced anisotropy, also significantly contribute to this effect. (C) 2003 Elsevier B.V. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Amsterdam | Editor | ||
| Language | Wos | 000187852100050 | Publication Date | 2003-10-17 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0921-4534; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 1.404 | Times cited | 9 | Open Access | |
| Notes |
Approved | Most recent IF: 1.404; 2004 IF: 1.072 | |||
| Call Number | UA @ lucian @ c:irua:94809 | Serial | 1730 | ||
| Permanent link to this record | |||||
| Author | Bals, S.; Van Tendeloo, G.; Rijnders, G.; Blank, D.H.A.; Leca, V.; Salluzzo, M. | ||||
| Title | Optimisation of superconducting thin films by TEM | Type | A1 Journal article | ||
| Year | 2002 | Publication | Physica: C : superconductivity | Abbreviated Journal | Physica C |
| Volume | 372/376 | Issue | part 2 | Pages | 711-714 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | High-resolution electron microscopy is used to study the initial growth of different REBa2CU3O7-5 thin films. In DyBa2CU3O7-5 ultra-thin films, deposited on TiO2 terminated SrTiO3, two different types of interface arrangements occur: bulk-SrO-TiO2-BaO-CuO-BaO-CuO2-Dy-CuO2-BaO-bulk and bulk-SrO-TiO2-BaO-CuO2-Dy-CuO2-BaO-CuO-BaO-bulk. This variable growth sequence is the origin of the presence of antiphase boundaries. In Nd1+xBa2-xCu3O7-5 thin films, antiphase boundaries tend to annihilate by the insertion of extra Nd-layers. This annihilation is correlated with the flat morphology of the film and the absence of growth spirals at the surface of the Nd-rich films. (C) 2002 Elsevier Science B.V. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Amsterdam | Editor | ||
| Language | Wos | 000178018800033 | Publication Date | 2002-08-26 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0921-4534; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 1.404 | Times cited | 6 | Open Access | |
| Notes |
Approved | Most recent IF: 1.404; 2002 IF: 0.912 | |||
| Call Number | UA @ lucian @ c:irua:54796 | Serial | 2485 | ||
| Permanent link to this record | |||||
| Author | Salluzzo, M.; Aruta, C.; Ausanio, G.; Bals, S.; d' Agostino, A.; Maglione, M.G. | ||||
| Title | Role of Nd/Ba substitution on the growth mode and on the structural properties of Nd-rich Re1(NdxBa2-x)Cu3O7-\delta (Re=Nd, Y) thin films | Type | A1 Journal article | ||
| Year | 2002 | Publication | Physica: C : superconductivity | Abbreviated Journal | Physica C |
| Volume | 372-376 | Issue | 2 | Pages | 675-678 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Thin films of the superconducting Nd1+xBa2−xCu3O7−δ (NBCO) and Y1(NdxBa2−x)Cu3O7−δ (YNBCO) compounds have been deposited by dc magnetron sputtering and diode high pressure oxygen sputtering. Different techniques, including scanning tunneling microscopy, atomic force microscopy, X-ray diffraction and transmission electron microscopy (TEM) have been used to study the film microstructures and the surface morphology. It is shown that the Nd/Ba exchange promotes a 2D heteroepitaxial growth in the case of the NBCO films deposited on (1 0 0) SrTiO3 substrates, with a suppression of the characteristic 3D spirals structures. On the contrary in YNBCO the Nd/Ba exchange does not provide a driving force for the suppression of screw-dislocations, since spirals or towers originated by screw and half loop dislocations are observed on the surface. TEM reveals that anti-phase boundaries are eliminated during the growth of NBCO films thanks to the Nd/Ba exchange while this mechanism is not operating in the case of YNBCO films. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Amsterdam | Editor | ||
| Language | Wos | 000178018800024 | Publication Date | 2002-08-26 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0921-4534; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 1.404 | Times cited | 5 | Open Access | |
| Notes |
Approved | Most recent IF: 1.404; 2002 IF: 0.912 | |||
| Call Number | UA @ lucian @ c:irua:87909 | Serial | 2917 | ||
| Permanent link to this record | |||||
| Author | Bals, S.; Van Tendeloo, G.; Salluzzo, M.; Maggio-Aprile, I. | ||||
| Title | Why are sputter deposited Nd1+xBa2-xCu3O7-\delta thin films flatter than NdBa2Cu3O7-\delta films? | Type | A1 Journal article | ||
| Year | 2001 | Publication | Applied physics letters | Abbreviated Journal | Appl Phys Lett |
| Volume | 79 | Issue | 22 | Pages | 3660-3662 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | High-resolution electron microscopy and scanning tunneling microscopy have been used to compare the microstructure of NdBa2Cu3O7-delta and Nd1+xBa2-xCu3O7-delta thin films. Both films contain comparable amounts of Nd2CuO4 inclusions. Antiphase boundaries are induced by unit cell high steps at the substrate or by a different interface stacking. In Nd1+xBa2-xCu3O7-delta the antiphase boundaries tend to annihilate by the insertion of extra Nd layers. Stacking faults, which can be characterized as local Nd2Ba2Cu4O9 inclusions, also absorb the excess Nd. A correlation is made between the excess Nd and the absence of growth spirals at the surface of the Nd-rich films. (C) 2001 American Institute of Physics. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | American Institute of Physics | Place of Publication | New York, N.Y. | Editor | |
| Language | Wos | 000172204400034 | Publication Date | 2002-07-26 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0003-6951; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.411 | Times cited | 13 | Open Access | |
| Notes |
Approved | Most recent IF: 3.411; 2001 IF: 3.849 | |||
| Call Number | UA @ lucian @ c:irua:54801 | Serial | 3916 | ||
| Permanent link to this record | |||||
| Author | Belov, I.; Paulussen, S.; Bogaerts, A. | ||||
| Title | Analysis and comparison of the co2 and co dielectric barrier discharge solid products | Type | P1 Proceeding | ||
| Year | 2016 | Publication | Hakone Xv: International Symposium On High Pressure Low Temperature Plasma Chemistry: With Joint Cost Td1208 Workshop: Non-equilibrium Plasmas With Liquids For Water And Surface Treatment | Abbreviated Journal | |
| Volume | Issue | Pages | |||
| Keywords | P1 Proceeding; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | The CO and CO2 Dielectric Barrier Discharges (DBD) and their solid products were analyzed keeping similar energy input regimes. Gas chromatography analysis revealed the presence of CO2, CO and O-2 mixture in the exhaust of the CO2 DBD, while no O-2 was found when CO was used as a feed gas. It was shown that the C-2 Swan lines observed with optical emission spectroscopy were distinct in the CO plasma while they were not observed in the CO2 emission spectrum. Also the solid products of the plasmas exhibited remarkable differences. Nanoparticles with a diameter between10 and 300 nm, composed of Fe, O and C (Fe: O: C similar to 13: 50: 30) were produced by the CO2 DBD, while microscopic dendrite-like carbon structure (C: O similar to 73: 27) were formed in the CO plasma. The growth rate in the CO2 and CO DBDs was evaluated to be on the level of 0.15 mg/min and 15 mg/min, respectively. The difference of the CO and CO2 discharges and their products might be attributed to the oxygen content in the latter (6.4 mol.% O-2 in the exhaust) and subsequent etching of the carbonaceous film. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Masarykova univ | Place of Publication | Brno | Editor | |
| Language | Wos | Publication Date | 0000-00-00 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 978-80-210-8318-9 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | Times cited | Open Access | |||
| Notes |
Approved | Most recent IF: NA | |||
| Call Number | UA @ lucian @ c:irua:141554 | Serial | 4516 | ||
| Permanent link to this record | |||||
| Author | Colin D. Judge, Nicolas Gauquelin, Lori Walters, Mike Wright, James I. Cole, James Madden, Gianluigi A. Botton, Malcolm Griffiths | ||||
| Title | Intergranular fracture in irradiated Inconel X-750 containing very high concentrations of helium and hydrogen | Type | A1 Journal Article | ||
| Year | 2015 | Publication | Journal of Nuclear Materials | Abbreviated Journal | |
| Volume | 457 | Issue | 457 | Pages | 165-172 |
| Keywords | A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; | ||||
| Abstract | In recent years, it has been observed that Inconel X-750 spacers in CANDU reactors exhibits lower ductility with reduced load carrying capacity following irradiation in a reactor environment. The fracture behaviour of ex-service material was also found to be entirely intergranular at high doses. The thermalized flux spectrum in a CANDU reactor leads to transmutation of 58Ni to 59Ni. The 59Ni itself has unusually high thermal neutron reaction cross-sections of the type: (n, γ), (n, p), and (n, α). The latter two reactions, in particular, contribute to a significant enhancement of the atomic displacements in addition to creating high concentrations of hydrogen and helium within the material. Microstructural examinations by transmission electron microscopy (TEM) have confirmed the presence of helium bubbles in the matrix and aligned along grain boundaries and matrix–precipitate interfaces. Helium bubble size and density are found to be highly dependent on the irradiation temperature and material microstructure; the bubbles are larger within grain boundary precipitates. TEM specimens extracted from fracture surfaces and crack tips provide information that is consistent with crack propagation along grain boundaries due to the presence of He bubbles. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000349169100022 | Publication Date | 2014-11-01 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | ISBN | Additional Links | |||
| Impact Factor | Times cited | 29 | Open Access | ||
| Notes |
Approved | Most recent IF: NA | |||
| Call Number | EMAT @ emat @ | Serial | 4540 | ||
| Permanent link to this record | |||||
| Author | Macke, S.; Radi, A.; Hamann-Borrero, J.E.; Verna, A.; Bluschke, M.; Brück, S.; Goering, E.; Sutarto, R.; He, F.; Cristiani, G.; Wu, M.; Benckiser, E.; Habermeier, H.-U.; Logvenov, G.; Gauquelin, N.; Botton, G.A; Kajdos, A.P.; Stemmer, S.; Sawatzky,G.A.; Haverkort, M.W.; Keimer, B.; Hinkov, V. | ||||
| Title | Element Specific Monolayer Depth Profiling | Type | A1 Journal Article | ||
| Year | 2014 | Publication | Advanced Materials | Abbreviated Journal | Adv Mater |
| Volume | 26 | Issue | 38 | Pages | 6554-6559 |
| Keywords | A1 Journal Article; Electron Microscopy for Materials Science (EMAT) | ||||
| Abstract | The electronic phase behavior and functionality of interfaces and surfaces in complex materials are strongly correlated to chemical composition profiles, stoichiometry and intermixing. Here a novel analysis scheme for resonant X-ray reflectivity maps is introduced to determine such profiles, which is element specific and non-destructive, and which exhibits atomic-layer resolution and a probing depth of hundreds of nanometers. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000343763200004 | Publication Date | 2014-08-08 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1521-4095 | ISBN | Additional Links | ||
| Impact Factor | 19.791 | Times cited | 34 | Open Access | |
| Notes |
Approved | Most recent IF: 19.791; 2014 IF: NA | |||
| Call Number | EMAT @ emat @ | Serial | 4541 | ||
| Permanent link to this record | |||||
| Author | Shuhui Sun, Gaixia Zhang, Nicolas Gauquelin, Ning Chen, Jigang Zhou, Songlan Yang, Weifeng Chen, Xiangbo Meng, Dongsheng Geng, Mohammad N. Banis, Ruying Li, Siyu Ye, Shanna Knights, Gianluigi A. Botton, Tsun-Kong Sham & Xueliang Sun | ||||
| Title | Single-atom Catalysis Using Pt/Graphene Achieved through Atomic Layer Deposition | Type | A1 Journal Article | ||
| Year | 2013 | Publication | Scientific Reports | Abbreviated Journal | |
| Volume | 3 | Issue | Pages | 1775 | |
| Keywords | A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; | ||||
| Abstract | Platinum-nanoparticle-based catalysts are widely used in many important chemical processes and automobile industries. Downsizing catalyst nanoparticles to single atoms is highly desirable to maximize their use efficiency, however, very challenging. Here we report a practical synthesis for isolated single Pt atoms anchored to graphene nanosheet using the atomic layer deposition (ALD) technique. ALD offers the capability of precise control of catalyst size span from single atom, subnanometer cluster to nanoparticle. The single-atom catalysts exhibit significantly improved catalytic activity (up to 10 times) over that of the state-of-the-art commercial Pt/C catalyst. X-ray absorption fine structure (XAFS) analyses reveal that the low-coordination and partially unoccupied densities of states of 5d orbital of Pt atoms are responsible for the excellent performance. This work is anticipated to form the basis for the exploration of a next generation of highly efficient single-atom catalysts for various applications. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000318334300004 | Publication Date | 2013-05-03 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | ISBN | Additional Links | |||
| Impact Factor | Times cited | 345 | Open Access | ||
| Notes |
Approved | Most recent IF: NA | |||
| Call Number | EMAT @ emat @ | Serial | 4543 | ||
| Permanent link to this record | |||||
| Author | N. Gauquelin, E. Benckiser, M. K. Kinyanjui, M. Wu, Y. Lu, G. Christiani, G. Logvenov, H.-U. Habermeier, U. Kaiser, B. Keimer, and G. A. Botton | ||||
| Title | Atomically resolved EELS mapping of the interfacial structure of epitaxially strained LaNiO3/LaAlO3 superlattices | Type | A1 Journal Article | ||
| Year | 2014 | Publication | Physical Review B | Abbreviated Journal | |
| Volume | 90 | Issue | Pages | 195140 | |
| Keywords | A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; | ||||
| Abstract | The interfacial atomic structure of a metallic LaNiO3/LaAlO3 superlattice grown on a LaSrAlO4 substrate was investigated using a combination of atomically resolved electron energy loss spectroscopy (EELS) at the Al K, Al L2,3, Sr L2,3, Ni L2,3, La M4,5, and O K edges as well as hybridization mapping of selected features of the O K-edge fine structure.We observe an additional La1−xSrxAl1−yNiyO3 layer at the substrate-superlattice interface, possibly linked to diffusion of Al and Sr into the growing film or a surface reconstruction due to Sr segregation. The roughness of the LaNiO3/LaAlO3 interfaces is found to be on average around one pseudocubic unit cell. The O K-edge EELS spectra revealed reduced spectral weight of the prepeak derived from Ni-O hybridized states in the LaNiO3 layers. We rule out oxygen nonstoichiometry of the LaNiO3 layers and discuss changes in the Ni-O hybridization due to heterostructuring as possible origin. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000345467000003 | Publication Date | 2014-11-20 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | ISBN | Additional Links | |||
| Impact Factor | Times cited | 17 | Open Access | ||
| Notes |
Approved | Most recent IF: NA | |||
| Call Number | EMAT @ emat @ | Serial | 4544 | ||
| Permanent link to this record | |||||
| Author | Li, S.; Liu, C.; Bogaerts, A.; Gallucci, F. | ||||
| Title | Editorial: Special issue on CO2 utilization with plasma technology | Type | Editorial | ||
| Year | 2022 | Publication | Journal Of Co2 Utilization | Abbreviated Journal | J Co2 Util |
| Volume | 61 | Issue | Pages | 102017 | |
| Keywords | Editorial; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Plasma technology has advanced significantly in recent years, with application ranging from chemical conversion, to surface treatment, material development and several other fields. Special attention has been paid to the development of possible novel approaches for the conversion of chemicals in a more sustainable way. Plasma technology offers advantages over thermochemical routes such as high process versatility, mild reaction condition, one-step synthesis, fast reaction and instant control. More importantly, it can be easily combined with electricity generated from various renewable sources and is suitable for energy storage via the conversion of intermittent renewable energy into carbon-neutral fuels or other chemicals. In recent years, there has been a growing interest in the development of plasma technology for CO2 utilization. Investigation on different reactions such as CO2 splitting, dry reforming of methane (DRM) and CO2 hydrogenation with different types of plasma reactors and catalysts have been reported by researchers worldwide. Although technological maturity still needs to be increased, the potential of plasma has been well-recognized by the scientific community and industry. More research output in the future is expected as a result of intensive research activities and various kinds of investment. In this context, we present this special issue on CO2 utilization with plasma technology, which collects 22 articles, covering topics in related areas such as plasma reactor design, plasma catalysis, plasmamaterial interaction, modeling and new ideas for possible applications. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000798071200005 | Publication Date | 0000-00-00 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2212-9820 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 7.7 | Times cited | Open Access | OpenAccess | |
| Notes |
Approved | Most recent IF: 7.7 | |||
| Call Number | PLASMANT @ plasmant @c:irua:188287 | Serial | 7058 | ||
| Permanent link to this record | |||||
| Author | Soldatov, A.; Yalovega, G.; Smolentsev, G.; Kravtsova, A.; Lamoen, D.; Balasubramanian, C.; Marcelli, A.; Cinque, G.; Bellucci, S. | ||||
| Title | ALN nanoparticles XANES analysis: local atomic and electronic structure | Type | A1 Journal article | ||
| Year | 2007 | Publication | Nuclear Instruments & Methods In Physics Research Section A-Accelerators Spectrometers Detectors And Associated Equipment | Abbreviated Journal | Nucl Instrum Meth A |
| Volume | 575 | Issue | 1/2 | Pages | 85-87 |
| Keywords | A1 Journal article; Electron Microscopy for Materials Science (EMAT); | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Elsevier | Place of Publication | Amsterdam | Editor | |
| Language | Wos | 000247146600021 | Publication Date | 2007-01-18 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0168-9002; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 1.362 | Times cited | 3 | Open Access | |
| Notes |
Approved | Most recent IF: 1.362; 2007 IF: 1.114 | |||
| Call Number | UA @ lucian @ c:irua:64755 | Serial | 89 | ||
| Permanent link to this record | |||||
| Author | Li, K.; Béché, A.; Song, M.; Sha, G.; Lu, X.; Zhang, K.; Du, Y.; Ringer, S.P.; Schryvers, D. | ||||
| Title | Atomistic structure of Cu-containing \beta" precipitates in an Al-Mg-Si-Cu alloy | Type | A1 Journal article | ||
| Year | 2014 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
| Volume | 75 | Issue | Pages | 86-89 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | The beta '' precipitates in a peak-aged Al-Mg-Si-Cu alloy were measured with an average composition of 28.6Al-38.7Mg-26.5Si-5.17Cu (at.%) using atom probe tomography. High-angle annular dark-field observations revealed that Cu incompletely substitutes for the Mg-1 and Si-3 columns, preferentially for one column in each pair of Si-3. Cu-free Si columns form a parallelogram-shaped network that constitutes the basis of subsequent precipitates in the system, with a = 0.37 nm, b = 0.38 nm, gamma = 113 degrees and c = 0.405 nm. (C) 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Oxford | Editor | ||
| Language | Wos | 000331025200022 | Publication Date | 2013-12-07 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6462; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.747 | Times cited | 22 | Open Access | |
| Notes |
Approved | Most recent IF: 3.747; 2014 IF: 3.224 | |||
| Call Number | UA @ lucian @ c:irua:115749 | Serial | 201 | ||
| Permanent link to this record | |||||
| Author | Lujan, G.S.; Magnus, W.; Sorée, B.; Ragnarsson, L.A.; Trojman, L.; Kubicek, S.; De Gendt, S.; Heyns, A.; De Meyer, K. | ||||
| Title | Barrier permeation effects on the inversion layer subband structure and its applications to the electron mobility | Type | A1 Journal article | ||
| Year | 2005 | Publication | Microelectronic engineering | Abbreviated Journal | Microelectron Eng |
| Volume | 80 | Issue | Pages | 82-85 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT) | ||||
| Abstract | The electron wave functions in the inversion layer are analyzed in the case where the dielectric barriers are not infinite. This forces the electron concentration closer to the interface silicon/oxide and reduces the subband energy. This treatment of the inversion layer is extended to the calculation of the electron mobility degradation due to remote Coulomb scattering on a high-k dielectric stacked transistor. The subband energy reduction leads to a decrease of the scattering charge needed to explain the experimental results. This model can also fit better the experimental data when compared with the case where no barrier permeation is considered. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Amsterdam | Editor | ||
| Language | Wos | 000231517000021 | Publication Date | 2005-06-05 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0167-9317; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 1.806 | Times cited | 1 | Open Access | |
| Notes |
Approved | Most recent IF: 1.806; 2005 IF: 1.347 | |||
| Call Number | UA @ lucian @ c:irua:102729 | Serial | 222 | ||
| Permanent link to this record | |||||