NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	61–81 of 81 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 >>

List View

Citations

Details

	Records
	Author	Idrissi, H.; Renard, K.; Schryvers, D.; Jacques, P.J.
	Title	TEM investigation of the formation mechanism of deformation twins in Fe-Mn-Si-Al TWIP steels			Type	A1 Journal article
	Year	2013	Publication	Philosophical magazine	Abbreviated Journal	Philos Mag
	Volume	93	Issue	35	Pages	4378-4391
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The microstructure of a Fe-Mn-Si-Al twinning-induced plasticity (TWIP) steel exhibiting remarkable work hardening rate under uniaxial tensile deformation was investigated using transmission electron microscopy to uncover the mechanism(s) controlling the nucleation and growth of the mechanically induced twins. The results show that the stair-rod cross-slip deviation mechanism is necessary for the formation of the twins, while large extrinsic stacking faults homogenously distributed within the grains could act as preferential sources for the activation of the deviation process. The influence of such features on the thickness and strength of the twins and the resulting mechanical behaviour is discussed and compared to similar works recently performed on Fe-Mn-C TWIP steels.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000327478300005	Publication Date	2013-09-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-6435;1478-6443;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.505	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 1.505; 2013 IF: 1.427
	Call Number	UA @ lucian @ c:irua:112815			Serial	3478
Permanent link to this record



	Author	Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J.
	Title	Multiscale characterization of the work hardening mechanisms in Fe-Mn based TWIP steels			Type	A1 Journal article
	Year	2012	Publication	Steel research international	Abbreviated Journal	Steel Res Int
	Volume	83	Issue	4	Pages	385-390
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	When strained in tension, high-manganese austenitic twinning induced plasticity (TWIP) steels achieve very high strength and elongation before necking. The main hypotheses available in the literature about the origin of their excellent work hardening include deformation twinning and dynamic strain ageing. In order to provide some answers, various experiments at different scales were conducted on FeMnC steels and the Fe28 wt%Mn3.5 wt%Al2.8 wt%Si alloy. At a macroscopic scale, tensile tests were performed on all the studied grades. It was shown that, though the FeMnAlSi based alloy retains very high elongation, the FeMnC steels properties are even more extraordinary. Tensile tests at different strain rates with the help of digital image correlation were also performed on the Fe20 wt%Mn1.2 wt%C steel to study the PLC effect occurring in this type of steel. It is suggested that supplementary hardening could come from reorientation of MnC pairs in the cores of the dislocations. At a microscopic scale, the Fe20 wt%Mn1.2 wt%C TWIP steel and the FeMnAlSi grade were thoroughly investigated by means of in situ TEM analysis. In the FeMnC steel, the formed twins could also lead to a composite effect, since they contain plenty of sessile dislocations. In the FeMnAlSi alloy, mechanical twins are thicker and contain fewer defects, leading to a lower work hardening than the other grade.
	Address
	Corporate Author				Thesis
	Publisher	Verlag Stahleisen	Place of Publication	Düsseldorf	Editor
	Language		Wos	000302471600016	Publication Date	2012-02-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1611-3683;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.235	Times cited	12	Open Access
	Notes				Approved	Most recent IF: 1.235; 2012 IF: 0.493
	Call Number	UA @ lucian @ c:irua:97391			Serial	2239
Permanent link to this record



	Author	Pardoen, T.; Colla, M.-S.; Idrissi, H.; Amin-Ahmadi, B.; Wang, B.; Schryvers, D.; Bhaskar, U.K.; Raskin, J.-P.
	Title	A versatile lab-on-chip test platform to characterize elementary deformation mechanisms and electromechanical couplings in nanoscopic objects			Type	A1 Journal article
	Year	2016	Publication	Comptes rendus : physique	Abbreviated Journal	Cr Phys
	Volume	17	Issue	17	Pages	485-495
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A nanomechanical on-chip test platform has recently been developed to deform under a variety of loading conditions freestanding thin films, ribbons and nanowires involving submicron dimensions. The lab-on-chip involves thousands of elementary test structures from which the elastic modulus, strength, strain hardening, fracture, creep properties can be extracted. The technique is amenable to in situ transmission electron microscopy (TEM) investigations to unravel the fundamental underlying deformation and fracture mechanisms that often lead to size-dependent effects in small-scale samples. The method allows addressing electrical and magnetic couplings as well in order to evaluate the impact of large mechanical stress levels on different solid-state physics phenomena. We had the chance to present this technique in details to Jacques Friedel in 2012 who, unsurprisingly, made a series of critical and very relevant suggestions. In the spirit of his legacy, the paper will address both mechanics of materials related phenomena and couplings with solids state physics issues.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000373524300020	Publication Date	2015-12-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1631-0705	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.048	Times cited	7	Open Access
	Notes	This research has been performed with the financial support of the “Politique scientifique fédérale” under the framework of the interuniversity attraction poles program, IAP7/21, as well as with the support of the “Communauté française de Belgique” under the program “Actions de recherche concertées” ARC 05/10-330 and ARC Convention No. 11/16-037. The support of the “Fonds belge pour la recherche dans l'industrie et l'agriculture (FRIA)” for M.-S. Colla is also gratefully acknowledged as are the FWO research projects G012012N “Understanding nanocrystalline mechanical behavior from structural investigations” for B. Amin-Ahmadi.			Approved	Most recent IF: 2.048
	Call Number	c:irua:129995			Serial	4014
Permanent link to this record



	Author	van Oeffelen, L.; Van Roy, W.; Idrissi, H.; Charlier, D.; Lagae, L.; Borghs, G.
	Title	Ion current rectification, limiting and overlimiting conductances in nanopores			Type	A1 Journal article
	Year	2015	Publication	PLoS ONE	Abbreviated Journal	Plos One
	Volume	10	Issue	10	Pages	e0124171
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Previous reports on Poisson-Nernst-Planck (PNP) simulations of solid-state nanopores have focused on steady state behaviour under simplified boundary conditions. These are Neumann boundary conditions for the voltage at the pore walls, and in some cases also Donnan equilibrium boundary conditions for concentrations and voltages at both entrances of the nanopore. In this paper, we report time-dependent and steady state PNP simulations under less restrictive boundary conditions, including Neumann boundary conditions applied throughout the membrane relatively far away from the nanopore. We simulated ion currents through cylindrical and conical nanopores with several surface charge configurations, studying the spatial and temporal dependence of the currents contributed by each ion species. This revealed that, due to slow co-diffusion of oppositely charged ions, steady state is generally not reached in simulations or in practice. Furthermore, it is shown that ion concentration polarization is responsible for the observed limiting conductances and ion current rectification in nanopores with asymmetric surface charges or shapes. Hence, after more than a decade of collective research attempting to understand the nature of ion current rectification in solid-state nanopores, a relatively intuitive model is retrieved. Moreover, we measured and simulated current-voltage characteristics of rectifying silicon nitride nanopores presenting overlimiting conductances. The similarity between measurement and simulation shows that overlimiting conductances can result from the increased conductance of the electric double-layer at the membrane surface at the depletion side due to voltage-induced polarization charges.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000354916100012	Publication Date	2015-05-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-6203;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.806	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 2.806; 2015 IF: 3.234
	Call Number	c:irua:126366			Serial	1744
Permanent link to this record



	Author	Guzzinati, G.; Altantzis, T.; Batuk, M.; De Backer, A.; Lumbeeck, G.; Samaee, V.; Batuk, D.; Idrissi, H.; Hadermann, J.; Van Aert, S.; Schryvers, D.; Verbeeck, J.; Bals, S.
	Title	Recent Advances in Transmission Electron Microscopy for Materials Science at the EMAT Lab of the University of Antwerp			Type	A1 Journal article
	Year	2018	Publication	Materials	Abbreviated Journal	Materials
	Volume	11	Issue	11	Pages	1304
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The rapid progress in materials science that enables the design of materials down to the nanoscale also demands characterization techniques able to analyze the materials down to the same scale, such as transmission electron microscopy. As Belgium’s foremost electron microscopy group, among the largest in the world, EMAT is continuously contributing to the development of TEM techniques, such as high-resolution imaging, diffraction, electron tomography, and spectroscopies, with an emphasis on quantification and reproducibility, as well as employing TEM methodology at the highest level to solve real-world materials science problems. The lab’s recent contributions are presented here together with specific case studies in order to highlight the usefulness of TEM to the advancement of materials science.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000444112800041	Publication Date	2018-07-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1996-1944	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.654	Times cited	15	Open Access	OpenAccess
	Notes	Fonds Wetenschappelijk Onderzoek, G.0502.18N, G.0267.18N, G.0120.12N, G.0365.15N, G.0934.17N, S.0100.18N AUHA13009 ; European Research Council, COLOURATOM 335078 ; Universiteit Antwerpen, GOA Solarpaint ; G. Guzzinati, T. Altantzis and A. De Backer have been supported by postdoctoral fellowship grants from the Research Foundation Flanders (FWO). Funding was also received from the European Research Council (starting grant no. COLOURATOM 335078), the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 770887), the Research Foundation Flanders (FWO, Belgium) through project fundings (G.0502.18N, G.0267.18N, G.0120.12N, G.0365.15N, G.0934.17N, S.0100.18N, G.0401.16N) and from the University of Antwerp through GOA project Solarpaint. Funding for the TopSPIN precession system under grant AUHA13009, as well as for the Qu-Ant-EM microscope, is acknowledged from the HERCULES Foundation. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (F.R.S.-FNRS). (ROMEO:green; preprint:; postprint:can ; pdfversion:can); saraecas; ECAS_Sara;			Approved	Most recent IF: 2.654
	Call Number	EMAT @ emat @c:irua:153737UA @ admin @ c:irua:153737			Serial	5064
Permanent link to this record



	Author	Turner, S.; Idrissi, H.; Sartori, A.F.; Korneychuck, S.; Lu, Y.-G.; Verbeeck, J.; Schreck, M.; Van Tendeloo, G.
	Title	Direct imaging of boron segregation at dislocations in B:diamond heteroepitaxial films			Type	A1 Journal article
	Year	2016	Publication	Nanoscale	Abbreviated Journal	Nanoscale
	Volume	8	Issue	8	Pages	2212-2218
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	A thin film of heavily B-doped diamond has been grown epitaxially by microwave plasma chemical vapor deposition on an undoped diamond layer, on top of a Ir/YSZ/Si(001) substrate stack, to study the boron segregation and boron environment at the dislocations present in the film. The density and nature of the dislocations were investigated by conventional and weak-beam dark-field transmission electron microscopy techniques, revealing the presence of two types of dislocations: edge and mixed-type 45 degrees dislocations. The presence and distribution of B in the sample was studied using annular dark-field scanning transmission electron microscopy and spatially resolved electron energy-loss spectroscopy. Using these techniques, a segregation of B at the dislocations in the film is evidenced, which is shown to be intermittent along the dislocation. A single edge-type dislocation was selected to study the distribution of the boron surrounding the dislocation core. By imaging this defect at atomic resolution, the boron is revealed to segregate towards the tensile strain field surrounding the edge-type dislocations. An investigation of the fine structure of the B-K edge at the dislocation core shows that the boron is partially substitutionally incorporated into the diamond lattice and partially present in a lower coordination (sp(2)-like hybridization).
	Address	EMAT, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp, Belgium. stuart.turner@uantwerpen.be
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language	English	Wos	000368860900053	Publication Date	2015-12-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2040-3364	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.367	Times cited	15	Open Access
	Notes	S. T. acknowledges the fund for scien tific research Flanders (FWO) for a post-doctoral scholarship and under contract number G.0044.13N			Approved	Most recent IF: 7.367
	Call Number	c:irua:131597UA @ admin @ c:irua:131597			Serial	4121
Permanent link to this record



	Author	Choisez, L.; Ding, L.; Marteleur, M.; Idrissi, H.; Pardoen, T.; Jacques, P.J.
	Title	High temperature rise dominated cracking mechanisms in ultra-ductile and tough titanium alloy			Type	A1 Journal article
	Year	2020	Publication	Nature Communications	Abbreviated Journal	Nat Commun
	Volume	11	Issue	1	Pages	2110
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Extensive use of titanium alloys is partly hindered by a lack of ductility, strain hardening, and fracture toughness. Recently, several beta -metastable titanium alloys were designed to simultaneously activate both transformation-induced plasticity and twinning-induced plasticity effects, resulting in significant improvements to their strain hardening capacity and resistance to plastic localization. Here, we report an ultra-large fracture resistance in a Ti-12Mo alloy (wt.%), that results from a high resistance to damage nucleation, with an unexpected fracture phenomenology under quasi-static loading. Necking develops at a large uniform true strain of 0.3 while fracture initiates at a true fracture strain of 1.0 by intense through-thickness shear within a thin localized shear band. Transmission electron microscopy reveals that dynamic recrystallization occurs in this band, while local partial melting is observed on the fracture surface. Shear band temperatures of 1250-2450 degrees C are estimated by the fusible coating method. The reported high ductility combined to the unconventional fracture process opens alternative avenues toward Ti alloys toughening. Specific titanium alloys combine transformation-induced plasticity and twinning-induced plasticity for improved work hardening. Here, the authors show that these alloys also have an ultra-large fracture resistance and an unexpected fracture mechanism via dynamic recrystallization and local melting in a deformation band.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000558816700010	Publication Date	2020-04-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2041-1723	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	16.6	Times cited	1	Open Access	OpenAccess
	Notes	; The Fonds National de Recherche Scientifique FNRS is gratefully acknowledged for the grant no. T.0127.19, the research grant of L.C. and the research mandate of H.I. The authors are thankful to J. Adrien and E. Maire for their help with the X-ray tomography analysis, to J.D. Embury for the fruitful discussions and to F. Prima for provisioning the material. ;			Approved	Most recent IF: 16.6; 2020 IF: 12.124
	Call Number	UA @ admin @ c:irua:171318			Serial	6536
Permanent link to this record



	Author	Samaee, V.; Dupraz, M.; Pardoen, T.; VAn Swygenhoven, H.; Schryvers, D.; Idrissi, H.
	Title	Deciphering the interactions between single arm dislocation sources and coherent twin boundary in nickel bi-crystal			Type	A1 Journal article
	Year	2021	Publication	Nature Communications	Abbreviated Journal	Nat Commun
	Volume	12	Issue	1	Pages	962
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The introduction of a well-controlled population of coherent twin boundaries (CTBs) is an attractive route to improve the strength ductility product in face centered cubic (FCC) metals. However, the elementary mechanisms controlling the interaction between single arm dislocation sources (SASs), often present in nanotwinned FCC metals, and CTB are still not well understood. Here, quantitative in-situ transmission electron microscopy (TEM) observations of these mechanisms under tensile loading are performed on submicron Ni bi-crystal. We report that the absorption of curved screw dislocations at the CTB leads to the formation of constriction nodes connecting pairs of twinning dislocations at the CTB plane in agreement with large scale 3D atomistic simulations. The coordinated motion of the twinning dislocation pairs due to the presence of the nodes leads to a unique CTB sliding mechanism, which plays an important role in initiating the fracture process at a CTB ledge. TEM observations of the interactions between non-screw dislocations and the CTB highlight the importance of the synergy between the repulsive force of the CTB and the back stress from SASs when the interactions occur in small volumes. Interactions of dislocations with coherent twin boundaries contribute to strength and ductility in metals, but investigating the interaction mechanisms is challenging. Here the authors unravel these mechanisms through quantitative in-situ transmission electron microscopy observations in nickel bi-crystal samples under tensile loading.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000620142700024	Publication Date	2021-02-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2041-1723	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.124	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 12.124
	Call Number	UA @ admin @ c:irua:176680			Serial	6722
Permanent link to this record



	Author	Colla, M.-S.; Amin-Ahmadi, B.; Idrissi, H.; Malet, L.; Godet, S.; Raskin, J.-P.; Schryvers, D.; Pardoen, T.
	Title	Dislocation-mediated relaxation in nanograined columnar palladium films revealed by on-chip time-resolved HRTEM testing			Type	A1 Journal article
	Year	2015	Publication	Nature communications	Abbreviated Journal	Nat Commun
	Volume	6	Issue	6	Pages	5922
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The high-rate sensitivity of nanostructured metallic materials demonstrated in the recent literature is related to the predominance of thermally activated deformation mechanisms favoured by a large density of internal interfaces. Here we report time-resolved high-resolution electron transmission microscopy creep tests on thin nanograined films using on-chip nanomechanical testing. Tests are performed on palladium, which exhibited unexpectedly large creep rates at room temperature. Despite the small 30-nm grain size, relaxation is found to be mediated by dislocation mechanisms. The dislocations interact with the growth nanotwins present in the grains, leading to a loss of coherency of twin boundaries. The density of stored dislocations first increases with applied deformation, and then decreases with time to drive additional deformation while no grain boundary mechanism is observed. This fast relaxation constitutes a key issue in the development of various micro- and nanotechnologies such as palladium membranes for hydrogen applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000348742300002	Publication Date	2015-01-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2041-1723;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.124	Times cited	34	Open Access
	Notes	Iap7/21; Fwo G012012n			Approved	Most recent IF: 12.124; 2015 IF: 11.470
	Call Number	c:irua:122045			Serial	731
Permanent link to this record



	Author	Samaee, V.; Gatti, R.; Devincre, B.; Pardoen, T.; Schryvers, D.; Idrissi, H.
	Title	Dislocation driven nanosample plasticity: new insights from quantitative in-situ TEM tensile testing			Type	A1 Journal Article
	Year	2018	Publication	Scientific Reports	Abbreviated Journal	Sci Rep-Uk
	Volume	8	Issue	1	Pages	12012
	Keywords	A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ;
	Abstract	Intrinsic dislocation mechanisms in the vicinity of free surfaces of an almost FIB damage-free single crystal Ni sample have been quantitatively investigated owing to a novel sample preparation method combining twin-jet electro-polishing, in-situ TEM heating and FIB. The results reveal that the small-scale plasticity is mainly controlled by the conversion of few tangled dislocations, still present after heating, into stable single arm sources (SASs) as well as by the successive operation of these sources. Strain hardening resulting from the operation of an individual SAS is reported and attributed to the decrease of the length of the source. Moreover, the impact of the shortening of the dislocation source on the intermittent plastic flow, characteristic of SASs, is discussed. These findings provide essential information for the understanding of the regime of ‘dislocation source’ controlled plasticity and the related mechanical size effect.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000460200900001	Publication Date	2018-08-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2045-2322	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.259	Times cited	9	Open Access	Not_Open_Access
	Notes	Financial support from the Flemish (FWO) and German Research Foundation (DFG) through the European M-ERA.NET project “FaSS” (Fatigue Simulation near Surfaces) under the grant numbers GA.014.13 N and SCHW855/5-1, respectively, is gratefully acknowledged. V. Samaee also acknowledges the FWO research project G012012N “Understanding nanocrystalline mechanical behaviour from structural investigations”. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). Dr. Ruth Schwaiger is acknowledged for providing the Ni foils used to prepare the in-situ TEM tensile specimens.			Approved	Most recent IF: 4.259
	Call Number	EMAT @ emat @c:irua:155772			Serial	5136
Permanent link to this record



	Author	Idrissi, H.; Ghidelli, M.; Béché, A.; Turner, S.; Gravier, S.; Blandin, J.-J.; Raskin, J.-P.; Schryvers, D.; Pardoen, T.
	Title	Atomic-scale viscoplasticity mechanisms revealed in high ductility metallic glass films			Type	A1 Journal article
	Year	2019	Publication	Scientific reports	Abbreviated Journal	Sci Rep-Uk
	Volume	9	Issue	1	Pages	13426
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The fundamental plasticity mechanisms in thin freestanding Zr65Ni35 metallic glass films are investigated in order to unravel the origin of an outstanding strength/ductility balance. The deformation process is homogenous until fracture with no evidence of catastrophic shear banding. The creep/relaxation behaviour of the films was characterized by on-chip tensile testing, revealing an activation volume in the range 100–200 Å3. Advanced high-resolution transmission electron microscopy imaging and spectroscopy exhibit a very fine glassy nanostructure with well-defined dense Ni-rich clusters embedded in Zr-rich clusters of lower atomic density and a ~2–3 nm characteristic length scale. Nanobeam electron diffraction analysis reveals that the accumulation of plastic deformation at roomtemperature correlates with monotonously increasing disruption of the local atomic order. These results provide experimental evidences of the dynamics of shear transformation zones activation in metallic glasses. The impact of the nanoscale structural heterogeneities on the mechanical properties including the rate dependent behaviour is discussed, shedding new light on the governing plasticity mechanisms in metallic glasses with initially heterogeneous atomic arrangement.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000486139700008	Publication Date	2019-09-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2045-2322	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.259	Times cited		Open Access
	Notes	H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). This work was supported by the FNRS under Grant PDR – T.0178.19. FWO project G093417N (‘Compressed sensing enabling low dose imaging in transmission electron microscopy’) and Hercules fund ‘Direct electron detector for soft matter TEM’ from Flemish Government are acknowledged.			Approved	Most recent IF: 4.259
	Call Number	EMAT @ emat @c:irua:162786			Serial	5375
Permanent link to this record



	Author	Tang, X.; Reckinger, N.; Poncelet, O.; Louette, P.; Urena, F.; Idrissi, H.; Turner, S.; Cabosart, D.; Colomer, J.-F.; Raskin, J.-P.; Hackens, B.; Francis, L.A.
	Title	Damage evaluation in graphene underlying atomic layer deposition dielectrics			Type	A1 Journal article
	Year	2015	Publication	Scientific reports	Abbreviated Journal	Sci Rep-Uk
	Volume	5	Issue	5	Pages	13523
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Based on micro-Raman spectroscopy (muRS) and X-ray photoelectron spectroscopy (XPS), we study the structural damage incurred in monolayer (1L) and few-layer (FL) graphene subjected to atomic-layer deposition of HfO2 and Al2O3 upon different oxygen plasma power levels. We evaluate the damage level and the influence of the HfO2 thickness on graphene. The results indicate that in the case of Al2O3/graphene, whether 1L or FL graphene is strongly damaged under our process conditions. For the case of HfO2/graphene, muRS analysis clearly shows that FL graphene is less disordered than 1L graphene. In addition, the damage levels in FL graphene decrease with the number of layers. Moreover, the FL graphene damage is inversely proportional to the thickness of HfO2 film. Particularly, the bottom layer of twisted bilayer (t-2L) has the salient features of 1L graphene. Therefore, FL graphene allows for controlling/limiting the degree of defect during the PE-ALD HfO2 of dielectrics and could be a good starting material for building field effect transistors, sensors, touch screens and solar cells. Besides, the formation of Hf-C bonds may favor growing high-quality and uniform-coverage dielectric. HfO2 could be a suitable high-K gate dielectric with a scaling capability down to sub-5-nm for graphene-based transistors.
	Address	ICTEAM Institute, Universite catholique de Louvain, Place du Levant 3, 1348 Louvain-la-Neuve, Belgium
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language	English	Wos	000360147400001	Publication Date	2015-08-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2045-2322;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.259	Times cited	18	Open Access
	Notes	The authors thank the staff of UCL’s Winfab and Welcome for technical support. Xiaohui Tang is a senior research of UCL. This work is financially supported by the Multi-Sensor-Platform for Smart Building Management project (No. 611887) and the Action de Recherche Concertée (ARC) “StressTronics”, Communauté française de Belgique. Part of this work is financially supported by the Belgian Fund for Scientific Research (FRS-FNRS) under FRFC contract “Chemographene” (No. 2.4577.11). J.-F. Colomer and B. Hackens are Research Associates of FRS-FNRS. This research used resources of the Electron Microscopy Service located at the University of Namur (“Plateforme Technologique Morphologie – Imagerie”). This research used resources of the ELISE Service of the University of Namur. This Service is member of the “Plateforme Technologique SIAM”. The research leading to this work has received partial funding from the European Union Seventh Framework Program under grant agreement No 604391 Graphene Flagship.			Approved	Most recent IF: 4.259; 2015 IF: 5.578
	Call Number	c:irua:129193			Serial	3958
Permanent link to this record



	Author	Bagherpour, A.; Baral, P.; Colla, M.-S.; Orekhov, A.; Idrissi, H.; Haye, E.; Pardoen, T.; Lucas, S.
	Title	Tailoring Mechanical Properties of a-C:H:Cr Coatings			Type	A1 Journal Article
	Year	2023	Publication	Coatings	Abbreviated Journal	Coatings
	Volume	13	Issue	12	Pages	2084
	Keywords	A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ;
	Abstract	The development of coatings with tunable performances is critical to meet a wide range of technological applications each one with different requirements. Using the plasma-enhanced chemical vapor deposition (PECVD) process, scientists can create hydrogenated amorphous carbon coatings doped with metal (a-C:H:Me) with a broad range of mechanical properties, varying from those resembling polymers to ones resembling diamond. These diverse properties, without clear relations between the different families, make the material selection and optimization difficult but also very rich. An innovative approach is proposed here based on projected performance indices related to fracture energy, strength, and stiffness in order to classify and optimize a-C:H:Me coatings. Four different a-C:H:Cr coatings deposited by PECVD with Ar/C2H2 discharge under different bias voltage and pressures are investigated. A path is found to produce coatings with a selective critical energy release rate between 5–125 J/m2 without compromising yield strength (1.6–2.7 GPa) and elastic limit (≈0.05). Finally, fine-tuned coatings are categorized to meet desired applications under different testing conditions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001136013600001	Publication Date	2023-12-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2079-6412	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes	Walloon region under the PDR FNRS, C 62/5—PDR/OL 33677636 ; Belgian National Fund for Scientific Research, CDR—J.0113.20 ; National Fund for Scientific Reaserch;			Approved	Most recent IF: NA
	Call Number	EMAT @ emat @c:irua:202390			Serial	8982
Permanent link to this record



	Author	Leusink, D.P.; Coneri, F.; Hoek, M.; Turner, S.; Idrissi, H.; Van Tendeloo, G.; Hilgenkamp, H.
	Title	Thin films of the spin ice compound Ho₂Ti₂O₇			Type	A1 Journal article
	Year	2014	Publication	APL materials	Abbreviated Journal	Apl Mater
	Volume	2	Issue	3	Pages	032101-32107
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The pyrochlore compounds Ho2Ti2O7 and Dy2Ti2O7 show an exotic form of magnetism called the spin ice state, resulting from the interplay between geometrical frustration and ferromagnetic coupling. A fascinating feature of this state is the appearance of magnetic monopoles as emergent excitations above the degenerate ground state. Over the past years, strong effort has been devoted to the investigation of these monopoles and other properties of the spin ice state in bulk crystals. Here, we report the fabrication of Ho2Ti2O7 thin films using pulsed laser deposition on yttria-stabilized ZrO2 substrates. We investigated the structural properties of these films by X-ray diffraction, scanning transmission electron microscopy, and atomic force microscopy, and the magnetic properties by vibrating sample magnetometry at 2 K. The films not only show a high crystalline quality, but also exhibit the hallmarks of a spin ice: a pronounced magnetic anisotropy and an intermediate plateau in the magnetization along the [111] crystal direction.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000334220300002	Publication Date	2014-03-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2166-532X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.335	Times cited	18	Open Access
	Notes	The authors acknowledge support from the Dutch FOM and NWO foundations and from the European Union under the Framework 7 program under a contract from an Integrated Infrastructure Initiative (Reference 312483 ESTEEM2). G.V.T. acknowledges the ERC Grant N246791- COUNTATOMS. S.T. gratefully acknowledges financial support from the Fund for Scientific Research Flanders (FWO). H.I. acknowledges the IAP program of the Belgian State Federal Office for Scientific, Technical and Cultural Affairs under Contract No. P7/21. The microscope used in this study was partially financed by the Hercules Foundation of the Flemish Government. The authors acknowledge fruitful interactions with A. Brinkman, M. G. Blamire, M. Egilmez, F. J. G. Roesthuis, J. N. Beukers, C. G. Molenaar, M. Veldhorst, and X. Renshaw Wang; esteem2_ta			Approved	Most recent IF: 4.335; 2014 IF: NA
	Call Number	UA @ lucian @ c:irua:115555			Serial	3641
Permanent link to this record



	Author	Idrissi, H.; Samaee, V.; Lumbeeck, G.; Werf, T.; Pardoen, T.; Schryvers, D.; Cordier, P.
	Title	In Situ Quantitative Tensile Testing of Antigorite in a Transmission Electron Microscope			Type	A1 Journal article
	Year	2020	Publication	Journal Of Geophysical Research-Solid Earth	Abbreviated Journal	J Geophys Res-Sol Ea
	Volume	125	Issue	3	Pages
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The determination of the mechanical properties of serpentinites is essential toward the understanding of the mechanics of faulting and subduction. Here we present the first in situ tensile tests on antigorite in a transmission electron microscope. A push‐to‐pull deformation device is used to perform quantitative tensile tests, during which force and displacement are measured, while the evolving microstructure is imaged with the microscope. The experiments have been performed at room temperature on 2 × 1 × 0.2 μm3 beams prepared by focused ion beam. The specimens are not single crystals despite their small sizes. Orientation mapping indicated that several grains were well oriented for plastic slip. However, no dislocation activity has been observed even though the engineering tensile stress went up to 700 MPa. We show also that antigorite does not exhibit a purely elastic‐brittle behavior since, despite the presence of defects, the specimens accumulate permanent deformation and did not fail within the elastic regime. Instead, we observe that strain localizes at grain boundaries. All observations concur to show that under these experimental conditions, grain boundary sliding is the dominant deformation mechanism. This study sheds a new light on the mechanical properties of antigorite and calls for further studies on the structure and properties of grain boundaries in antigorite and more generally in phyllosilicates.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000530895800023	Publication Date	2020-02-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2169-9313	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.9	Times cited		Open Access	OpenAccess
	Notes	We thank S. Guillot for having kindly provided us with the two antigorite samples investigated in this study. We acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program under Grant Agreement 787198—TimeMan. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR‐FNRS). We acknowledge fruitful discussions with A. Baronnet. We thank J. Gasc and an anonymous reviewer for their critical comments. Data (movies of the three in situ deformation experiments) can be downloaded (from https://doi.org/10.5281/zenodo.3583135).			Approved	Most recent IF: 3.9; 2020 IF: 3.35
	Call Number	EMAT @ emat @c:irua:167594			Serial	6355
Permanent link to this record



	Author	Sandfeld, S.; Samaee, V.; Idrissi, H.; Groten, J.; Pardoen, T.; Schwaiger, R.; Schryvers, D.
	Title	Datasets for the analysis of dislocations at grain boundaries and during vein formation in cyclically deformed Ni micropillars			Type	A1 Journal article
	Year	2019	Publication	Data in Brief	Abbreviated Journal
	Volume	27	Issue	27	Pages	104724
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The dataset together with the corresponding Python scripts and Jupyter notebooks presented in this article are supplementary data for the work presented in Samaee et al., 2019 [1]. The data itself consists of two parts: the simulation data that was used in [1] to analyze the effect of a particular grain boundary on curved dislocations and the precession electron diffraction (PED) strain maps together with post-processed data for analyzing details of the observed dislocation vein structures. Additionally, the complete stress tensor components, which are not shown in [1], have also been included. The data sets are accompanied by Python code explaining the file formats and showing how to post-process the data. (c) 2019 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000501988200181	Publication Date	2019-11-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2352-3409	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:165092			Serial	6292
Permanent link to this record



	Author	Idrissi, H.; Bollinger, C.; Boioli, F.; Schryvers, D.; Cordier, P.
	Title	Low-temperature plasticity of olivine revisited with in situ TEM nanomechanical testing			Type	A1 Journal article
	Year	2016	Publication	Science Advances	Abbreviated Journal
	Volume	2	Issue	2	Pages	e1501671-e1501671
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The rheology of the lithospheric mantle is fundamental to understanding how mantle convection couples with plate tectonics. However, olivine rheology at lithospheric conditions is still poorly understood because experiments are difficult in this temperature range where rocks and mineral become very brittle. We combine techniques of quantitative in situ tensile testing in a transmission electron microscope and numerical modeling of dislocation dynamics to constrain the low-temperature rheology of olivine. We find that the intrinsic ductility of olivine at low temperature is significantly lower than previously reported values, which were obtained under strain-hardened conditions. Using this method, we can anchor rheological laws determined at higher temperature and can provide a better constraint on intermediate temperatures relevant for the lithosphere. More generally, we demonstrate the possibility of characterizing the mechanical properties of specimens, which can be available in the form of submillimeter-sized particles only.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000379620200043	Publication Date	2016-03-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2375-2548	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	32	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:134983			Serial	4202
Permanent link to this record



	Author	Marteleur, M.; Idrissi, H.; Amin-Ahmadi, B.; Prima, F.; Schryvers, D.; Jacques, P.J.
	Title	On the nucleation mechanism of {112} < 111 > mechanical twins in as-quenched beta metastable Ti-12 wt.% Mo alloy			Type	A1 Journal article
	Year	2019	Publication	Materialia	Abbreviated Journal
	Volume	7	Issue		Pages	Unsp 100418
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Recently developed beta-metastable Ti grades take advantage of the simultaneous activation of TRIP and TWIP effects for enhancing their work hardening rate. However, the role of each plasticity mechanism on the macroscopic mechanical response is still unclear. In this work, the nucleation mechanism of the first activated plasticity mechanism, namely {112} < 111 > twinning, was investigated. Firstly, post-mortem TEM analysis showed that twins nucleate on pre-existing microstructural defects such as thermal jogs with the zonal dislocation mechanism. The precipitation of the omega phase on twin boundaries has been observed, as well as the emission of numerous dislocations from super-jogs present in these twin boundaries. It is also shown that {112} < 111 > twins act as effective dislocation sources for the subsequent plasticity mechanisms such as beta -> alpha '' martensitic transformation and {332} < 111 > twinning. Secondly, in situ TEM tensile testing of the investigated Ti grade highlighted the primary role of the initial defect configuration present in the microstructure. It is shown that twins cannot nucleate without the presence of specific defects allowing the triggering of the dislocation decomposition needed for the twinning mechanism highlighted in investigated bulk samples.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000537131000052	Publication Date	2019-07-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2589-1529	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:170326			Serial	6875
Permanent link to this record



	Author	Lezaack, M.B.; Hannard, F.; Zhao, L.; Orekhov, A.; Adrien, J.; Miettinen, A.; Idrissi, H.; Simar, A.
	Title	Towards ductilization of high strength 7XXX aluminium alloys via microstructural modifications obtained by friction stir processing and heat treatments			Type	A1 Journal article
	Year	2021	Publication	Materialia	Abbreviated Journal
	Volume	20	Issue		Pages	101248
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	High strength 7XXX aluminium series reach exceptional strength, higher than all other industrial aluminium alloys. However, they suffer from a lack of ductility compared to softer series. This work presents a procedure to improve the ductility of 7475 Al alloy in high strength condition, reaching a true fracture strain of 70% at full 500 MPa T6 yield strength. Using friction stir processing (FSP) and post-FSP heat treatments, 100% of industrial rolled material T6 yield stress is maintained but a 180% increase in fracture strain is measured for the processed material. This ductility improvement is studied by in-situ synchrotron X-ray tomography and is explained by the reduction of intermetallic particles size and the homogenization of their spatial distribution. Furthermore, the microstructure after FSP shows equiaxed refined grains which favour crack deviation as opposed to large cracks parallel to the elongated coarse grains in rolled plate. These results are paving the way to better formability and crashworthiness of 7XXX alloys.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000718127100006	Publication Date	2021-10-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2589-1529	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access	Not_Open_Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:184145			Serial	6894
Permanent link to this record



	Author	Poulain, R.; Lumbeeck, G.; Hunka, J.; Proost, J.; Savolainen, H.; Idrissi, H.; Schryvers, D.; Gauquelin, N.; Klein, A.
	Title	Electronic and chemical properties of nickel oxide thin films and the intrinsic defects compensation mechanism			Type	A1 Journal article
	Year	2022	Publication	ACS applied electronic materials	Abbreviated Journal
	Volume	4	Issue	6	Pages	2718-2728
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Although largely studied, contradictory results on nickel oxide (NiO) properties can be found in the literature. We herein propose a comprehensive study that aims at leveling contradictions related to NiO materials with a focus on its conductivity, surface properties, and the intrinsic charge defects compensation mechanism with regards to the conditions preparation. The experiments were performed by in situ photo-electron spectroscopy, electron energy loss spectroscopy, and optical as well as electrical measurements on polycrystalline NiO thin films prepared under various preparation conditions by reactive sputtering. The results show that surface and bulk properties were strongly related to the deposition temperature with in particular the observation of Fermi level pinning, high work function, and unstable oxygen-rich grain boundaries for the thin films produced at room temperature but not at high temperature (>200 degrees C). Finally, this study provides substantial information about surface and bulk NiO properties enabling to unveil the origin of the high electrical conductivity of room temperature NiO thin films and also for supporting a general electronic charge compensation mechanism of intrinsic defects according to the deposition temperature.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000819431200001	Publication Date	2022-06-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2637-6113	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access	Not_Open_Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:189555			Serial	7081
Permanent link to this record



	Author	Brognara, A.; Kashiwar, A.; Jung, C.; Zhang, X.; Ahmadian, A.; Gauquelin, N.; Verbeeck, J.; Djemia, P.; Faurie, D.; Dehm, G.; Idrissi, H.; Best, J.P.; Ghidelli, M.
	Title	Tailoring mechanical properties and shear band propagation in ZrCu metallic glass nanolaminates through chemical heterogeneities and interface density			Type	A1 Journal article
	Year	2024	Publication	Small Structures	Abbreviated Journal
	Volume		Issue		Pages	2400011-11
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The design of high‐performance structural thin films consistently seeks to achieve a delicate equilibrium by balancing outstanding mechanical properties like yield strength, ductility, and substrate adhesion, which are often mutually exclusive. Metallic glasses (MGs) with their amorphous structure have superior strength, but usually poor ductility with catastrophic failure induced by shear bands (SBs) formation. Herein, we introduce an innovative approach by synthesizing MGs characterized by large and tunable mechanical properties, pioneering a nanoengineering design based on the control of nanoscale chemical/structural heterogeneities. This is realized through a simplified model Zr 24 Cu 76 /Zr 61 Cu 39 , fully amorphous nanocomposite with controlled nanoscale periodicity ( Λ , from 400 down to 5 nm), local chemistry, and glass–glass interfaces, while focusing in‐depth on the SB nucleation/propagation processes. The nanolaminates enable a fine control of the mechanical properties, and an onset of crack formation/percolation (>1.9 and 3.3%, respectively) far above the monolithic counterparts. Moreover, we show that SB propagation induces large chemical intermixing, enabling a brittle‐to‐ductile transition when Λ ≤ 50 nm, reaching remarkably large plastic deformation of 16% in compression and yield strength ≈2 GPa. Overall, the nanoengineered control of local heterogeneities leads to ultimate and tunable mechanical properties opening up a new approach for strong and ductile materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	2024-05-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2688-4062	ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:205798			Serial	9176
Permanent link to this record