NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	31–60 of 336 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 >>

List View

Citations

Details

	Records
	Author	Delville, R.; Malard, B.; Pilch, J.; Sittner, P.; Schryvers, D.
	Title	Transmission electron microscopy study of microstructural evolution in nanograined Ni-Ti microwires heat treated by electric pulse			Type	A1 Journal article
	Year	2011	Publication	Diffusion and defect data : solid state data : part B : solid state phenomena	Abbreviated Journal
	Volume	172/174	Issue		Pages	682-687
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Transmission electron microscopy and mechanical testing were employed to investigate the evolution of microstructure and functional superelastic properties of 0.1mm diameter as-drawn Ni-Ti wires subjected to a non-conventional heat treatment by controlled electric pulse current. This method enables a finer control of the recovery and recrystallisation processes taking place during the heat treatment and accordingly a better control on the final microstructure. The best functional properties were obtained for heat-treated Ni-Ti wires having a nanograined microstructure (20-50 nm) partially recovered through polygonization and partially recrystallized. Such microstructure is highly resistant against dislocation slip upon cycling, while microstructures annealed for longer time and showing mostly recrystallized grains were prone to dislocation slip, particularly as the grain size exceeds 100 nm. The density of dislocation defects increased significantly with increasing grain size of the microstructure. The activity of three <100>/{011} slip systems was identified in the largest grains of 500-1200 nm. An additional mode of plastic deformation, {114} compound austenite twinning, was observed in the largest grains of fully recrystallized microstructures. It is proposed that dislocation slip (and possibly deformation twinning) occurring in superelastic cycling is coupled with the stress-induced martensitic transformation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Vaduz	Editor
	Language		Wos	000303359700105	Publication Date	2011-07-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-9779;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	3	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:90154			Serial	3717
Permanent link to this record



	Author	Cao, S.; Tirry, W.; van den Broek, W.; Schryvers, D.
	Title	3D reconstruction of Ni₄Ti₃ precipitates in a Ni₅₁Ti₄₉ alloy in a FIB/SEM dual-beam system			Type	A1 Journal article
	Year	2008	Publication	Materials science forum	Abbreviated Journal
	Volume	583	Issue		Pages	277-284
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Ni4Ti3 precipitates play an important role in the shape memory and superelastic behaviour of thermo-mechanically treated Ni-Ti material. The 3D morphology and distribution of such precipitates with lenticular shape and rhombohedral atomic structure in the austenitic B2 matrix of a binary Ni-rich Ni-Ti alloy has been elucidated via a slice view procedure in a Dual-Beam FIB/SEM system. With the sequence of cross-section SE images obtained from the SEM, a 3D reconstruction has been achieved after proper alignment and image processing, from which both qualitative and quantitative analysis can be performed. Careful imaging is needed to ensure that all variants of the precipitates are observed with equal probability, regardless sample orientation. Moreover, due to the weak contrast of the precipitates, proper imaging conditions need to be selected to allow for semi-automated image treatment. Finally, a volume ratio of 10.2% for the Ni4Ti3 precipitates could be calculated, summed over all variants, which yields a net composition of Ni50.36Ti49.64 for the matrix, leading to an increase of 113 degrees for the martensitic start temperature Ms. Also, the expected relative orientation of the different variants of the precipitates could be confirmed. In the near future, other quantitative measures on the distribution of the precipitates can be expected.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos		Publication Date	2009-03-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-9752;	ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes	Multimat; Fwo			Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:77454			Serial	16
Permanent link to this record



	Author	Wang, X.; Amin-Ahmadi, B.; Schryvers, D.; Verlinden, B.; Van Humbeeck, J.
	Title	Effect of annealing on the transformation behavior and mechanical properties of two nanostructured Ti-50.8at.%Ni thin wires produced by different methods			Type	A1 Journal article
	Year	2013	Publication	Materials science forum	Abbreviated Journal
	Volume	738/739	Issue		Pages	306-310
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A Ti-50.8at.%Ni wire produced using a co-drawing method and a commercial Ti-50.8at.%Ni wire were annealed at different temperatures between 450°C and 700°C. Grains with diameter less than 100nm were revealed by transmission electron microscopy for both wires before annealing treatment. However, the microstructural heterogeneity of the co-drawn wire is more obvious than that of the commercial wire. Multi-stage martensitic transformation was observed in the co-drawn wire, compared with the one-stage A↔M transformation in the commercial wire after annealing at 600°C for 30min. The differences of total elongation, plateau strain and pseudoelastic recoverable strain between the commercial wire and the co-drawn wire were also observed. The differences of the transformation behavior and mechanical properties between the commercial wire and the co-drawn wire are attributed to the microstructural difference between these two wires.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000316089000055	Publication Date	2013-03-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-9752;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	5	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:104691			Serial	798
Permanent link to this record



	Author	Shi, H.; Frenzel, J.; Schryvers, D.
	Title	EM characterization of precipitates in as-cast and annealed Ni_45.5Ti_45.5Nb₉ shape memory alloys			Type	P1 Proceeding
	Year	2013	Publication	Materials science forum	Abbreviated Journal
	Volume	738/739	Issue		Pages	113-117
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract	Nb-rich precipitates in the matrix of as-cast and annealed Ni45.5Ti45.5Nb9 alloys are investigated by scanning and scanning transmission electron microscopy, including slice-and-view and geometric phase analysis (GPA). The Nb-rich bcc nano-precipitates in the as-cast alloy have a 10% lattice parameter difference with the B2 matrix and reveal compensating interface dislocations. The 3D reconstruction of the configuration of small Nb-rich precipitates in the annealed alloy reveals a wall-like distribution of precipitates, which may increase the thermal hysteresis of the material.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000316089000020	Publication Date	2013-03-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-9752;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	1	Open Access
	Notes	Fwo			Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:104690			Serial	1028
Permanent link to this record



	Author	Schryvers, D.; Shi, H.; Martinez, G.T.; Van Aert, S.; Frenzel, J.; Van Humbeeck, J.
	Title	Nano- and microcrystal investigations of precipitates, interfaces and strain fields in Ni-Ti-Nb by various TEM techniques			Type	P1 Proceeding
	Year	2013	Publication	Materials science forum T2 – 9th European Symposium on Martensitic Transformations (ESOMAT 2012), SEP 09-16, 2012, St Petersburg, RUSSIA	Abbreviated Journal
	Volume	738/739	Issue		Pages	65-71
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract	In the present contribution several advanced electron microscopy techniques are employed in order to describe chemical and structural features of the nano- and microstructure of a Ni45.5Ti45.5Nb9 alloy. A line-up of Nb-rich nano-precipitates is found in the Ni-Ti-rich austenite of as-cast material. Concentration changes of the matrix after annealing are correlated with changes in the transformation temperatures. The formation of rows and plates of larger Nb-rich precipitates and particles is described. The interaction of a twinned martensite plate with a Nb-rich nano-precipitate is discussed and the substitution of Nb atoms on the Ti-sublattice in the matrix is confirmed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000316089000011	Publication Date	2013-03-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-9752;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	2	Open Access
	Notes	Fwo			Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:104692			Serial	2247
Permanent link to this record



	Author	Pardoen, T.; Colla, M.-S.; Idrissi, H.; Amin-Ahmadi, B.; Wang, B.; Schryvers, D.; Bhaskar, U.K.; Raskin, J.-P.
	Title	A versatile lab-on-chip test platform to characterize elementary deformation mechanisms and electromechanical couplings in nanoscopic objects			Type	A1 Journal article
	Year	2016	Publication	Comptes rendus : physique	Abbreviated Journal	Cr Phys
	Volume	17	Issue	17	Pages	485-495
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A nanomechanical on-chip test platform has recently been developed to deform under a variety of loading conditions freestanding thin films, ribbons and nanowires involving submicron dimensions. The lab-on-chip involves thousands of elementary test structures from which the elastic modulus, strength, strain hardening, fracture, creep properties can be extracted. The technique is amenable to in situ transmission electron microscopy (TEM) investigations to unravel the fundamental underlying deformation and fracture mechanisms that often lead to size-dependent effects in small-scale samples. The method allows addressing electrical and magnetic couplings as well in order to evaluate the impact of large mechanical stress levels on different solid-state physics phenomena. We had the chance to present this technique in details to Jacques Friedel in 2012 who, unsurprisingly, made a series of critical and very relevant suggestions. In the spirit of his legacy, the paper will address both mechanics of materials related phenomena and couplings with solids state physics issues.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000373524300020	Publication Date	2015-12-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1631-0705	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.048	Times cited	7	Open Access
	Notes	This research has been performed with the financial support of the “Politique scientifique fédérale” under the framework of the interuniversity attraction poles program, IAP7/21, as well as with the support of the “Communauté française de Belgique” under the program “Actions de recherche concertées” ARC 05/10-330 and ARC Convention No. 11/16-037. The support of the “Fonds belge pour la recherche dans l'industrie et l'agriculture (FRIA)” for M.-S. Colla is also gratefully acknowledged as are the FWO research projects G012012N “Understanding nanocrystalline mechanical behavior from structural investigations” for B. Amin-Ahmadi.			Approved	Most recent IF: 2.048
	Call Number	c:irua:129995			Serial	4014
Permanent link to this record



	Author	Gonnissen, J.; Batuk, D.; Nataf, G.F.; Jones, L.; Abakumov, A.M.; Van Aert, S.; Schryvers, D.; Salje, E.K.H.
	Title	Direct Observation of Ferroelectric Domain Walls in LiNbO₃: Wall-Meanders, Kinks, and Local Electric Charges			Type	A1 Journal article
	Year	2016	Publication	Advanced functional materials	Abbreviated Journal	Adv Funct Mater
	Volume	26	Issue	26	Pages	7599-7604
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Direct observations of the ferroelectric domain boundaries in LiNbO3 are performed using high-resolution high-angle annular dark field scanning transmission electron microscopy imaging, revealing a very narrow width of the domain wall between the 180° domains. The domain walls demonstrate local side-way meandering, which results in inclinations even when the overall wall orientation follows the ferroelectric polarization. These local meanders contain kinks with “head-to-head” and “tail-to-tail” dipolar configurations and are therefore locally charged. The charged meanders are confined to a few cation layers along the polarization direction and are separated by longer stretches of straight domain walls.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000388166700006	Publication Date	2016-09-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1616-301X	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.124	Times cited	23	Open Access
	Notes	J.G. acknowledges the support from the Research Foundation Flanders (FWO, Belgium) through various project fundings (G.0368.15N, G.0369.15N, and G.0374.13N), as well as the financial support from the European Union Seventh Framework Program (FP7/2007–2013) under Grant agreement no. 312483 (ESTEEM2). The authors thank J. Hadermann for useful suggestions on the interpretation of the HAADFSTEM images. E.K.H.S. thanks the EPSRC (EP/K009702/1) and the Leverhulme Trust (EM-2016-004) for support. G.F.N. thanks the National Research Fund, Luxembourg (FNR/P12/4853155/Kreisel) for support.; esteem2_jra2			Approved	Most recent IF: 12.124
	Call Number	c:irua:135336 c:irua:135336			Serial	4129
Permanent link to this record



	Author	Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J.
	Title	Multiscale characterization of the work hardening mechanisms in Fe-Mn based TWIP steels			Type	A1 Journal article
	Year	2012	Publication	Steel research international	Abbreviated Journal	Steel Res Int
	Volume	83	Issue	4	Pages	385-390
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	When strained in tension, high-manganese austenitic twinning induced plasticity (TWIP) steels achieve very high strength and elongation before necking. The main hypotheses available in the literature about the origin of their excellent work hardening include deformation twinning and dynamic strain ageing. In order to provide some answers, various experiments at different scales were conducted on FeMnC steels and the Fe28 wt%Mn3.5 wt%Al2.8 wt%Si alloy. At a macroscopic scale, tensile tests were performed on all the studied grades. It was shown that, though the FeMnAlSi based alloy retains very high elongation, the FeMnC steels properties are even more extraordinary. Tensile tests at different strain rates with the help of digital image correlation were also performed on the Fe20 wt%Mn1.2 wt%C steel to study the PLC effect occurring in this type of steel. It is suggested that supplementary hardening could come from reorientation of MnC pairs in the cores of the dislocations. At a microscopic scale, the Fe20 wt%Mn1.2 wt%C TWIP steel and the FeMnAlSi grade were thoroughly investigated by means of in situ TEM analysis. In the FeMnC steel, the formed twins could also lead to a composite effect, since they contain plenty of sessile dislocations. In the FeMnAlSi alloy, mechanical twins are thicker and contain fewer defects, leading to a lower work hardening than the other grade.
	Address
	Corporate Author				Thesis
	Publisher	Verlag Stahleisen	Place of Publication	Düsseldorf	Editor
	Language		Wos	000302471600016	Publication Date	2012-02-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1611-3683;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.235	Times cited	12	Open Access
	Notes				Approved	Most recent IF: 1.235; 2012 IF: 0.493
	Call Number	UA @ lucian @ c:irua:97391			Serial	2239
Permanent link to this record



	Author	Idrissi, H.; Renard, K.; Schryvers, D.; Jacques, P.J.
	Title	TEM investigation of the formation mechanism of deformation twins in Fe-Mn-Si-Al TWIP steels			Type	A1 Journal article
	Year	2013	Publication	Philosophical magazine	Abbreviated Journal	Philos Mag
	Volume	93	Issue	35	Pages	4378-4391
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The microstructure of a Fe-Mn-Si-Al twinning-induced plasticity (TWIP) steel exhibiting remarkable work hardening rate under uniaxial tensile deformation was investigated using transmission electron microscopy to uncover the mechanism(s) controlling the nucleation and growth of the mechanically induced twins. The results show that the stair-rod cross-slip deviation mechanism is necessary for the formation of the twins, while large extrinsic stacking faults homogenously distributed within the grains could act as preferential sources for the activation of the deviation process. The influence of such features on the thickness and strength of the twins and the resulting mechanical behaviour is discussed and compared to similar works recently performed on Fe-Mn-C TWIP steels.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000327478300005	Publication Date	2013-09-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-6435;1478-6443;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.505	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 1.505; 2013 IF: 1.427
	Call Number	UA @ lucian @ c:irua:112815			Serial	3478
Permanent link to this record



	Author	Delville, R.; Kasinathan, S.; Zhang, Z.; van Humbeeck, J.; James, R.D.; Schryvers, D.
	Title	Transmission electron microscopy study of phase compatibility in low hysteresis shape memory alloys			Type	A1 Journal article
	Year	2010	Publication	Philosophical magazine	Abbreviated Journal	Philos Mag
	Volume	90	Issue	1/4	Pages	177-195
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Recent findings have linked low hysteresis in shape memory alloys with phase compatibility between austenite and martensite. To investigate the evolution of microstructure as phase compatibility increases and hysteresis is reduced, transmission electron microscopy was used to study the alloy system Ti50Ni50xPdx, where the composition is systemically tuned to approach perfect compatibility. Changes in morphology, twinning density and twinning modes are reported, along with special microstructures occurring when compatibility is achieved. In addition, the interface between austenite and a single variant of martensite was studied by high-resolution and conventional electron microscopy. The low energy configuration of the interface detailed in this article suggests that it plays an important role in the lowering of hysteresis compared to classical habit plane interfaces.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000274576500013	Publication Date	2010-01-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-6435;1478-6443;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.505	Times cited	70	Open Access
	Notes	Multimat; FWO			Approved	Most recent IF: 1.505; 2010 IF: 1.304
	Call Number	UA @ lucian @ c:irua:79859			Serial	3718
Permanent link to this record



	Author	Penders, A.; Konstantinovic, M.J.; Bosch, R.W.; Schryvers, D.
	Title	Crack initiation in tapered high Si stainless steel specimens : stress threshold analyses			Type	A1 Journal article
	Year	2020	Publication	Corrosion Engineering Science And Technology	Abbreviated Journal	Corros Eng Sci Techn
	Volume		Issue		Pages	1-8
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Tapered specimens were used for an accelerated test technique to study the crack initiation of high Si stainless steel by means of constant elongation rate tensile testing in a simulated pressurised water reactor environment. Detailed crack density distributions were obtained by applying an advanced crack detection algorithm on iteratively displaced scanning electron microscopy pictures featuring stress corrosion cracks along the specimen's gauge length. By means of finite-element analysis, prominent peaks in the crack density graphs are demonstrated to be related to stress relief and stress build-up during the crack initiation phase. Intrinsic scatter related to the crack detection suggests that stress corrosion cracking is independent of the strain-rate for strain-rates lower than 10(-6 )s(-1). Based on the extrapolation to constant load conditions, the critical threshold value for the duplex high Si stainless steel is estimated to be around 580 MPa.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000549651600001	Publication Date	2020-06-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-422x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.8	Times cited	1	Open Access	Not_Open_Access
	Notes	; We would like to acknowledge ENGIE Electrabel for the financial support of this work under the contract number BSUEZ5500. ;			Approved	Most recent IF: 1.8; 2020 IF: 0.879
	Call Number	UA @ admin @ c:irua:171292			Serial	6478
Permanent link to this record



	Author	Penders, A.; Konstantinovic, M.J.; Van Renterghem, W.; Bosch, R.W.; Schryvers, D.
	Title	TEM investigation of SCC crack tips in high Si stainless steel tapered specimens			Type	A1 Journal article
	Year	2021	Publication	Corrosion Engineering Science And Technology	Abbreviated Journal	Corros Eng Sci Techn
	Volume		Issue		Pages
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The stress corrosion cracking (SCC) mechanism is investigated in high Si duplex stainless steel in a simulated PWR environment based on TEM analysis of FIB-extracted SCC crack tips. The microstructural investigation in the near vicinity of SCC crack tips illustrates a strain-rate dependence in SCC mechanisms. Detailed analysis of the crack tip morphology, that includes crack tip oxidation and surrounding deformation field, indicates the existence of an interplay between corrosion- and deformation-driven failure as a function of the strain rate. Slow strain-rate crack tips exhibit a narrow cleavage failure which can be linked to the film-induced failure mechanism, while rounded shaped crack tips for faster strain rates could be related to the strain-induced failure. As a result, two nominal strain-rate-dependent failure regimes dominated either by corrosion or deformation-driven cracking mechanisms can be distinguished.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000695956400001	Publication Date	2021-09-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-422x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	0.879	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 0.879
	Call Number	UA @ admin @ c:irua:181533			Serial	6892
Permanent link to this record



	Author	Tirry, W.; Schryvers, D.
	Title	Linking a completely three-dimensional nanostrain to a structural transformation eigenstrain			Type	A1 Journal article
	Year	2009	Publication	Nature materials	Abbreviated Journal	Nat Mater
	Volume	8	Issue	9	Pages	752-757
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	NiTi is one of the most popular shape-memory alloys, a phenomenon resulting from a martensitic transformation. Commercial NiTi-based alloys are often thermally treated to contain Ni4Ti3 precipitates. The presence of these precipitates can introduce an extra transformation step related to the so-called R-phase. It is believed that the strain field surrounding the precipitates, caused by the matrixprecipitate lattice mismatch, lies at the origin of this intermediate transformation step. Atomic-resolution transmission electron microscopy in combination with geometrical phase analysis is used to measure the elastic strain field surrounding these precipitates. By combining measurements from two different crystallographic directions, the three-dimensional strain matrix is determined from two-dimensional measurements. Comparison of the measured strain matrix to the eigenstrain of the R-phase shows that both are very similar and that the introduction of the R-phase might indeed compensate the elastic strain introduced by the precipitate.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000269215500022	Publication Date	2009-06-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1476-1122;1476-4660;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	39.737	Times cited	53	Open Access
	Notes	Multimat			Approved	Most recent IF: 39.737; 2009 IF: 29.504
	Call Number	UA @ lucian @ c:irua:77657			Serial	1822
Permanent link to this record



	Author	Schryvers, D.; Cao, S.; Tirry, W.; Idrissi, H.; Van Aert, S.
	Title	Advanced three-dimensional electron microscopy techniques in the quest for better structural and functional materials			Type	A1 Journal article
	Year	2013	Publication	Science and technology of advanced materials	Abbreviated Journal	Sci Technol Adv Mat
	Volume	14	Issue	1	Pages	014206-14213
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	After a short review of electron tomography techniques for materials science, this overview will cover some recent results on different shape memory and nanostructured metallic systems obtained by various three-dimensional (3D) electron imaging techniques. In binary NiTi, the 3D morphology and distribution of Ni4Ti3 precipitates are investigated by using FIB/SEM slice-and-view yielding 3D data stacks. Different quantification techniques will be presented including the principal ellipsoid for a given precipitate, shape classification following a Zingg scheme, particle distribution function, distance transform and water penetration. The latter is a novel approach to quantifying the expected matrix transformation in between the precipitates. The different samples investigated include a single crystal annealed with and without compression yielding layered and autocatalytic precipitation, respectively, and a polycrystal revealing different densities and sizes of the precipitates resulting in a multistage transformation process. Electron tomography was used to understand the interaction between focused ion beam-induced Frank loops and long dislocation structures in nanobeams of Al exhibiting special mechanical behaviour measured by on-chip deposition. Atomic resolution electron tomography is demonstrated on Ag nanoparticles in an Al matrix.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Sendai	Editor
	Language		Wos	000316463800008	Publication Date	2013-03-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1468-6996;1878-5514;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.798	Times cited	6	Open Access
	Notes	Fwo; Iap; Esteem			Approved	Most recent IF: 3.798; 2013 IF: 2.613
	Call Number	UA @ lucian @ c:irua:107343			Serial	77
Permanent link to this record



	Author	Chen, Z.; Tan, Z.; Ji, G.; Schryvers, D.; Ouyang, Q.; Li, Z.
	Title	Effect of interface evolution on thermal conductivity of vacuum hot pressed SiC/Al composites			Type	A1 Journal article
	Year	2015	Publication	Advanced engineering materials	Abbreviated Journal	Adv Eng Mater
	Volume	17	Issue	17	Pages	1076-1084
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The SiC/Al composites have been fabricated by a vacuum hot pressing (VHP) process in order to study the effect of interface evolution on the global thermal conductivity (TC). By optimizing the VHP parameters of sintering temperature and time, the three different kinds of SiC/Al interface configurations, that is, non-bonded, diffusion-bonded, and reaction-bonded interfaces, are formed and identified by measurement of relative density, X-ray diffraction, scanning and (high-resolution) transmission electron microscopy. The VHPed composite sintered at 655 °C for 60 min is fully dense and presents a tightly-adhered and clean SiC/Al interface at the nanoscale, the ideal diffusion-bonded interface being the most favorable for minimizing interfacial thermal resistance, which in turn results in the highest TC of around 270 W/mK.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000357680700019	Publication Date	2015-01-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1438-1656;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.319	Times cited	9	Open Access
	Notes				Approved	Most recent IF: 2.319; 2015 IF: 1.758
	Call Number	c:irua:123000			Serial	818
Permanent link to this record



	Author	Bals, S.; Tirry, W.; Geurts, R.; Yang, Z.; Schryvers, D.
	Title	High-quality sample preparation by low kV FIB thinning for analytical TEM measurements			Type	A1 Journal article
	Year	2007	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	13	Issue	2	Pages	80-86
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Focused ion beam specimen preparation has been used for NiTi samples and SrTiO(3)/SrRuO(3) multilayers with prevention of surface amorphization and Ga implantation by a 2-kV cleaning procedure. Transmission electron microscopy techniques show that the samples are of high quality with a controlled thickness over large scales. Furthermore, preferential thinning effects in multicompounds are avoided, which is important when analytical transmission electron microscopy measurements need to be interpreted in a quantitative manner. The results are compared to similar measurements acquired for samples obtained using conventional preparation techniques such as electropolishing for alloys and ion milling for oxides.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000245662200002	Publication Date	2007-03-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	82	Open Access
	Notes	Fwo; Goa			Approved	Most recent IF: 1.891; 2007 IF: 1.941
	Call Number	UA @ lucian @ c:irua:65850			Serial	1441
Permanent link to this record



	Author	Lu, J.; Roeffaers, M.B.J.; Bartholomeeusen, E.; Sels, B.F.; Schryvers, D.
	Title	Intergrowth of components and ramps in coffin-shaped ZSM-5 zeolite crystals unraveled by focused ion beam-assisted transmission electron microscopy			Type	A1 Journal article
	Year	2014	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	20	Issue	1	Pages	42-49
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Scanning electron microscopy, focused ion beam (FIB), and transmission electron microscopy are combined to study the intergrowth of 90 degrees rotational components and of ramps in coffin-shaped ZSM-5 crystals. The 90 degrees rotational boundaries with local zig-zag features between different intergrowth components are observed in the main part of crystal. Also a new kind of displacement boundary is described. At the displacement boundary there is a shift of the unit cells along the boundary without a change in orientation. Based on lamellae prepared with FIB from different positions of the ramps and crystal, the orientation relationships between ramps and the main part of the crystal are studied and the three-dimensional morphology and growth mechanism of the ramp are illustrated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000335378400006	Publication Date	2013-11-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	7	Open Access
	Notes				Approved	Most recent IF: 1.891; 2014 IF: 1.877
	Call Number	UA @ lucian @ c:irua:117688			Serial	1697
Permanent link to this record



	Author	Tian, H.; Schryvers, D.; Shabalovskaya, S.; van Humbeeck, J.
	Title	Microstructure of surface and subsurface layers of a Ni-Ti shape memory microwire			Type	A1 Journal article
	Year	2009	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	15	Issue		Pages	62-70
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The microstructure of a 55 Êm diameter, cold-worked Ni-Ti microwire is investigated by different transmission electron microscopy techniques. The surface consists of a few hundred nanometer thick oxide layer composed of TiO and TiO2 with a small fraction of inhomogeneously distributed Ni. The interior of the wire has a core-shell structure with primarily B2 grains in the 1 Êm thick shell, and heavily twinned B19 martensite in the core. This core-shell structure can be explained by a concentration gradient of the alloying elements resulting in a structure separation due to the strong temperature dependence of the martensitic start temperature. Moreover, in between the B2 part of the metallic core-shell and the oxide layer, a Ni3Ti interfacial layer is detected.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000262912700009	Publication Date	2009-01-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	15	Open Access
	Notes	FWO G.0465.05; Multimat			Approved	Most recent IF: 1.891; 2009 IF: 3.035
	Call Number	UA @ lucian @ c:irua:72319			Serial	2074
Permanent link to this record



	Author	Grieten, E.; Caen, J.; Schryvers, D.
	Title	Optimal sample preparation to characterize corrosion in historical photographs with analytical TEM			Type	A1 Journal article
	Year	2014	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	20	Issue	5	Pages	1585-1590
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Antwerp Cultural Heritage Sciences (ARCHES)
	Abstract	An alternative focused ion beam preparation method is used for sampling historical photographs containing metallic nanoparticles in a polymer matrix. We use the preparation steps of classical ultra-microtomy with an alternative final sectioning with a focused ion beam. Transmission electron microscopy techniques show that the lamella has a uniform thickness, which is an important factor for analytical transmission electron microscopy. Furthermore, the method maintains the spatial distribution of nanoparticles in the soft matrix. The results are compared with traditional preparation techniques such as ultra-microtomy and classical focused ion beam milling.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000345742900031	Publication Date	2014-09-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited		Open Access
	Notes				Approved	Most recent IF: 1.891; 2014 IF: 1.877
	Call Number	UA @ lucian @ c:irua:118481			Serial	2484
Permanent link to this record



	Author	Idrissi, H.; Turner, S.; Mitsuhara, M.; Wang, B.; Hata, S.; Coulombier, M.; Raskin, J.-P.; Pardoen, T.; Van Tendeloo, G.; Schryvers, D.
	Title	Point defect clusters and dislocations in FIB irradiated nanocrystalline aluminum films : an electron tomography and aberration-corrected high-resolution ADF-STEM study			Type	A1 Journal article
	Year	2011	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	17	Issue	6	Pages	983-990
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Focused ion beam (FIB) induced damage in nanocrystalline Al thin films has been characterized using advanced transmission electron microscopy techniques. Electron tomography was used to analyze the three-dimensional distribution of point defect clusters induced by FIB milling, as well as their interaction with preexisting dislocations generated by internal stresses in the Al films. The atomic structure of interstitial Frank loops induced by irradiation, as well as the core structure of Frank dislocations, has been resolved with aberration-corrected high-resolution annular dark-field scanning TEM. The combination of both techniques constitutes a powerful tool for the study of the intrinsic structural properties of point defect clusters as well as the interaction of these defects with preexisting or deformation dislocations in irradiated bulk or nanostructured materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000297832300018	Publication Date	2011-10-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	25	Open Access
	Notes	Iap; Fwo			Approved	Most recent IF: 1.891; 2011 IF: 3.007
	Call Number	UA @ lucian @ c:irua:93627			Serial	2653
Permanent link to this record



	Author	Heidari, H.; Rivero, G.; Idrissi, H.; Ramachandran, D.; Cakir, S.; Egoavil, R.; Kurttepeli, M.; Crabbé, A.C.; Hauffman, T.; Terryn, H.; Du Prez, F.; Schryvers, D.
	Title	Melamine–Formaldehyde Microcapsules: Micro- and Nanostructural Characterization with Electron Microscopy			Type	A1 Journal article
	Year	2016	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	22	Issue	22	Pages	1222-1232
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A systematic study has been carried out to compare the surface morphology, shell thickness, mechanical properties, and binding behavior of melamine–formaldehyde microcapsules of 5–30 μm diameter size with various amounts of core content by using scanning and transmission electron microscopy including electron tomography, in situ nanomechanical tensile testing, and electron energy-loss spectroscopy. It is found that porosities are present on the outside surface of the capsule shell, but not on the inner surface of the shell. Nanomechanical tensile tests on the capsule shells reveal that Young’s modulus of the shell material is higher than that of bulk melamine–formaldehyde and that the shells exhibit a larger fracture strain compared with the bulk. Core-loss elemental analysis of microcapsules embedded in epoxy indicates that during the curing process, the microcapsule-matrix interface remains uniform and the epoxy matrix penetrates into the surface micro-porosities of the capsule shells.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000393853100011	Publication Date	2016-12-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	2	Open Access
	Notes	This work was supported by SIM vzw, Technologiepark 935, BE-9052 Zwijnaarde, Belgium, within the InterPoCo project of the H-INT-S horizontal program. The authors are also thankful to Stijn Van den Broeck and Dr. Frederic Leroux for help in sample preparation and to S. Bals and J. Verbeeck for valuable discussions. H.I. acknowledges the IAP program of the Belgian State Federal Office for Scientific, Technical and Cultural Affairs, under Contract No. P7/21.			Approved	Most recent IF: 1.891
	Call Number	EMAT @ emat @ c:irua:138980			Serial	4333
Permanent link to this record



	Author	Yang, Z.; Schryvers, D.
	Title	Composition gradients surrounding Ni₄Ti₃ precipitates in a NiTi alloy studied by EELS, EFTEM and EDX			Type	A1 Journal article
	Year	2006	Publication	International journal of applied electromagnetics and mechanics	Abbreviated Journal	Int J Appl Electrom
	Volume	23	Issue	1/2	Pages	17-24
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1383-5416	ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor	0.769	Times cited		Open Access
	Notes				Approved	Most recent IF: 0.769; 2006 IF: 0.262
	Call Number	UA @ lucian @ c:irua:59610			Serial	443
Permanent link to this record



	Author	Muto, S.; Merk, N.; Schryvers, D.; Tanner, L.E.
	Title	Displacive-replacive phase transformation in a Ni_62.5Al_37.5 phase studies by HREM and microdiffraction			Type	A1 Journal article
	Year	1993	Publication	Philosophical magazine: B: physics of condensed matter: electronic, optical and magnetic properties	Abbreviated Journal
	Volume	67	Issue	5	Pages	673-689
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The structure of the metastable Ni2Al phase, which has long been a matter of controversy, has been carefully re-examined by means of high-resolution transmission electron microscopy (HREM) and electron microdiffraction. First, it is concluded that theas-quenched NixAl100-x(60 less-than-or-equal-to x less-than-or-equal-to 65) material already exhibits a partial omega-type collapse in a one-dimensional fashion which and is consistent with the anomalous dip in the phonon dispersion curve. Ni2Al precipitates are formed on annealing by thermal decomposition of the high-temperature NixAl100-xB2 phase and still retain the small omega-type shuffle. The amount of displacement in the well developed Ni2Al phase was estimated to be between 20 and 50% of the ideal omega collapse; this was determined by means of a combined technique of HREM and microdiffraction together with dynamical calculations of HREM images and diffraction intensities.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	A1993LF72000005	Publication Date	2007-07-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1364-2812;1463-6417;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	16	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:6776			Serial	740
Permanent link to this record



	Author	Bartholomeeusen, E.; De Cremer, G.; Kennes, K.; Hammond, C.; Hermans, I.; Lu, J.-B.; Schryvers, D.; Jacobs, P.A.; Roeffaers, M.B.J.; Hofkens, J.; Sels, B.F.; Coutino-Gonzalez, E.
	Title	Optical encoding of luminescent carbon nanodots in confined spaces			Type	A1 Journal article
	Year	2021	Publication	Chemical Communications	Abbreviated Journal	Chem Commun
	Volume	57	Issue	90	Pages	11952-11955
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Stable emissive carbon nanodots were generated in zeolite crystals using near infrared photon irradiation gradually converting the occluded organic template, originally used to synthesize the zeolite crystals, into discrete luminescent species consisting of nano-sized carbogenic fluorophores, as ascertained using Raman microscopy, and steady-state and time-resolved spectroscopic techniques. Photoactivation in a confocal laser fluorescence microscope allows 3D resolved writing of luminescent carbon nanodot patterns inside zeolites providing a cost-effective and non-toxic alternative to previously reported metal-based nanoclusters confined in zeolites, and opens up opportunities in bio-labelling and sensing applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000711122000001	Publication Date	2021-10-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-7345; 1364-548x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.319	Times cited		Open Access	Not_Open_Access
	Notes				Approved	Most recent IF: 6.319
	Call Number	UA @ admin @ c:irua:184147			Serial	6876
Permanent link to this record



	Author	Yang, Z.; Tirry, W.; Schryvers, D.
	Title	Analytical TEM investigations on concentration gradients surrounding Ni₄Ti₃ precipitates in Ni-Ti shape memory material			Type	A1 Journal article
	Year	2005	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	52	Issue	11	Pages	1129-1134
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000228190200010	Publication Date	2005-03-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	49	Open Access
	Notes	GOA project; MCRTN-FP6-505226 Multimat			Approved	Most recent IF: 3.747; 2005 IF: 2.228
	Call Number	UA @ lucian @ c:irua:55687			Serial	110
Permanent link to this record



	Author	Li, K.; Béché, A.; Song, M.; Sha, G.; Lu, X.; Zhang, K.; Du, Y.; Ringer, S.P.; Schryvers, D.
	Title	Atomistic structure of Cu-containing \beta" precipitates in an Al-Mg-Si-Cu alloy			Type	A1 Journal article
	Year	2014	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	75	Issue		Pages	86-89
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The beta '' precipitates in a peak-aged Al-Mg-Si-Cu alloy were measured with an average composition of 28.6Al-38.7Mg-26.5Si-5.17Cu (at.%) using atom probe tomography. High-angle annular dark-field observations revealed that Cu incompletely substitutes for the Mg-1 and Si-3 columns, preferentially for one column in each pair of Si-3. Cu-free Si columns form a parallelogram-shaped network that constitutes the basis of subsequent precipitates in the system, with a = 0.37 nm, b = 0.38 nm, gamma = 113 degrees and c = 0.405 nm. (C) 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000331025200022	Publication Date	2013-12-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	22	Open Access
	Notes				Approved	Most recent IF: 3.747; 2014 IF: 3.224
	Call Number	UA @ lucian @ c:irua:115749			Serial	201
Permanent link to this record



	Author	Santamarta, R.; Schryvers, D.
	Title	Effect of amorphous-crystalline interfaces on the martensitic transformation in Ti₅₀Ni₂₅Cu₂₅			Type	A1 Journal article
	Year	2004	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	50	Issue		Pages	1423-1427
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000221009500002	Publication Date	2004-04-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	29	Open Access
	Notes				Approved	Most recent IF: 3.747; 2004 IF: 2.112
	Call Number	UA @ lucian @ c:irua:48379			Serial	795
Permanent link to this record



	Author	Shi, H.; Pourbabak, S.; Van Humbeeck, J.; Schryvers, D.
	Title	Electron microscopy study of Nb-rich nanoprecipitates in NiTiNb and their influence on the martensitic transformation			Type	A1 Journal article
	Year	2012	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	67	Issue	12	Pages	939-942
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Nb-rich nanoprecipitates in the matrix of an annealed commercial NiTiNb alloy are investigated by scanning and transmission electron microscopy, including slice-and-view and chemical analysis. The precipitates have a diameter of around 100 nm, are faceted and have a cube-on-cube relation with the B2 matrix. In situ TEM cooling shows that the martensitic transformation is hampered by the presence of these precipitates. The latter could explain the increase in hysteresis when compared with the binary system.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000311135000005	Publication Date	2012-08-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	29	Open Access
	Notes	Fwo			Approved	Most recent IF: 3.747; 2012 IF: 2.821
	Call Number	UA @ lucian @ c:irua:101486			Serial	971
Permanent link to this record



	Author	Cao, S.; Somsen, C.; Croitoru, M.; Schryvers, D.; Eggeler, G.
	Title	Focused ion beam/scanning electron microscopy tomography and conventional transmission electron microscopy assessment of Ni₄Ti₃ morphology in compression-aged Ni-rich Ni-Ti single crystals			Type	A1 Journal article
	Year	2010	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	62	Issue	6	Pages	399-402
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
	Abstract	The size, morphology and configuration of Ni4Ti3 precipitates in a single-crystal NiTi alloy have been investigated by two-dimensional transmission electron microscopy-based image analysis and three-dimensional reconstruction from slice-and-view images obtained in a focused ion beam/scanning electron microscopy (FIB/SEM) dual-beam system. Average distances between the precipitates measured along the compression direction correlate well between both techniques, while particle shape and configuration data is best obtained from FIB/SEM. Precipitates form pockets of B2 of 0.54 ìm in the compression direction and 1 ìm perpendicular to the compression direction.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000275072700020	Publication Date	2009-12-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	16	Open Access
	Notes	Fwo			Approved	Most recent IF: 3.747; 2010 IF: 2.820
	Call Number	UA @ lucian @ c:irua:79817			Serial	1246
Permanent link to this record



	Author	Schryvers, D.; Lahjouji, D.E.; Slootmaekers, B.; Potapov, P.L.
	Title	HREM investigation of martensite precursor effects and stacking sequences in Ni-Mn-Ti alloys			Type	A1 Journal article
	Year	1996	Publication	Scripta metallurgica et materialia	Abbreviated Journal	Scripta Mater
	Volume	35	Issue		Pages	1235-1241
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	A1996VL92800019	Publication Date	2002-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.224	Times cited	2	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:15427			Serial	1506
Permanent link to this record