Home << 1 2 3 4 5 6 7 8 9 10 11 12 >>
List View
 | 
Citations
 | 
Details
   web
Records
Author Delville, R.; Malard, B.; Pilch, J.; Sittner, P.; Schryvers, D.
Title Transmission electron microscopy study of microstructural evolution in nanograined Ni-Ti microwires heat treated by electric pulse Type A1 Journal article
Year 2011 Publication Diffusion and defect data : solid state data : part B : solid state phenomena Abbreviated Journal
Volume 172/174 Issue Pages 682-687
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Transmission electron microscopy and mechanical testing were employed to investigate the evolution of microstructure and functional superelastic properties of 0.1mm diameter as-drawn Ni-Ti wires subjected to a non-conventional heat treatment by controlled electric pulse current. This method enables a finer control of the recovery and recrystallisation processes taking place during the heat treatment and accordingly a better control on the final microstructure. The best functional properties were obtained for heat-treated Ni-Ti wires having a nanograined microstructure (20-50 nm) partially recovered through polygonization and partially recrystallized. Such microstructure is highly resistant against dislocation slip upon cycling, while microstructures annealed for longer time and showing mostly recrystallized grains were prone to dislocation slip, particularly as the grain size exceeds 100 nm. The density of dislocation defects increased significantly with increasing grain size of the microstructure. The activity of three <100>/{011} slip systems was identified in the largest grains of 500-1200 nm. An additional mode of plastic deformation, {114} compound austenite twinning, was observed in the largest grains of fully recrystallized microstructures. It is proposed that dislocation slip (and possibly deformation twinning) occurring in superelastic cycling is coupled with the stress-induced martensitic transformation.
Address
Corporate Author Thesis
Publisher Place of Publication Vaduz Editor
Language Wos 000303359700105 Publication Date 2011-07-04
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1662-9779; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 3 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:90154 Serial 3717
Permanent link to this record
 
 
Author Cao, S.; Tirry, W.; van den Broek, W.; Schryvers, D.
Title 3D reconstruction of Ni4Ti3 precipitates in a Ni51Ti49 alloy in a FIB/SEM dual-beam system Type A1 Journal article
Year 2008 Publication Materials science forum Abbreviated Journal
Volume 583 Issue Pages 277-284
Keywords A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
Abstract Ni4Ti3 precipitates play an important role in the shape memory and superelastic behaviour of thermo-mechanically treated Ni-Ti material. The 3D morphology and distribution of such precipitates with lenticular shape and rhombohedral atomic structure in the austenitic B2 matrix of a binary Ni-rich Ni-Ti alloy has been elucidated via a slice view procedure in a Dual-Beam FIB/SEM system. With the sequence of cross-section SE images obtained from the SEM, a 3D reconstruction has been achieved after proper alignment and image processing, from which both qualitative and quantitative analysis can be performed. Careful imaging is needed to ensure that all variants of the precipitates are observed with equal probability, regardless sample orientation. Moreover, due to the weak contrast of the precipitates, proper imaging conditions need to be selected to allow for semi-automated image treatment. Finally, a volume ratio of 10.2% for the Ni4Ti3 precipitates could be calculated, summed over all variants, which yields a net composition of Ni50.36Ti49.64 for the matrix, leading to an increase of 113 degrees for the martensitic start temperature Ms. Also, the expected relative orientation of the different variants of the precipitates could be confirmed. In the near future, other quantitative measures on the distribution of the precipitates can be expected.
Address
Corporate Author Thesis
Publisher Place of Publication Lausanne Editor
Language Wos Publication Date 2009-03-11
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1662-9752; ISBN Additional Links UA library record
Impact Factor Times cited Open Access
Notes Multimat; Fwo Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:77454 Serial 16
Permanent link to this record
 
 
Author Wang, X.; Amin-Ahmadi, B.; Schryvers, D.; Verlinden, B.; Van Humbeeck, J.
Title Effect of annealing on the transformation behavior and mechanical properties of two nanostructured Ti-50.8at.%Ni thin wires produced by different methods Type A1 Journal article
Year 2013 Publication Materials science forum Abbreviated Journal
Volume 738/739 Issue Pages 306-310
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract A Ti-50.8at.%Ni wire produced using a co-drawing method and a commercial Ti-50.8at.%Ni wire were annealed at different temperatures between 450°C and 700°C. Grains with diameter less than 100nm were revealed by transmission electron microscopy for both wires before annealing treatment. However, the microstructural heterogeneity of the co-drawn wire is more obvious than that of the commercial wire. Multi-stage martensitic transformation was observed in the co-drawn wire, compared with the one-stage A↔M transformation in the commercial wire after annealing at 600°C for 30min. The differences of total elongation, plateau strain and pseudoelastic recoverable strain between the commercial wire and the co-drawn wire were also observed. The differences of the transformation behavior and mechanical properties between the commercial wire and the co-drawn wire are attributed to the microstructural difference between these two wires.
Address
Corporate Author Thesis
Publisher Place of Publication Lausanne Editor
Language Wos 000316089000055 Publication Date 2013-03-11
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1662-9752; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 5 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:104691 Serial 798
Permanent link to this record
 
 
Author Shi, H.; Frenzel, J.; Schryvers, D.
Title EM characterization of precipitates in as-cast and annealed Ni45.5Ti45.5Nb9 shape memory alloys Type P1 Proceeding
Year 2013 Publication Materials science forum Abbreviated Journal
Volume 738/739 Issue Pages 113-117
Keywords P1 Proceeding; Electron microscopy for materials research (EMAT)
Abstract Nb-rich precipitates in the matrix of as-cast and annealed Ni45.5Ti45.5Nb9 alloys are investigated by scanning and scanning transmission electron microscopy, including slice-and-view and geometric phase analysis (GPA). The Nb-rich bcc nano-precipitates in the as-cast alloy have a 10% lattice parameter difference with the B2 matrix and reveal compensating interface dislocations. The 3D reconstruction of the configuration of small Nb-rich precipitates in the annealed alloy reveals a wall-like distribution of precipitates, which may increase the thermal hysteresis of the material.
Address
Corporate Author Thesis
Publisher Place of Publication Lausanne Editor
Language Wos 000316089000020 Publication Date 2013-03-11
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1662-9752; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 1 Open Access
Notes Fwo Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:104690 Serial 1028
Permanent link to this record
 
 
Author Schryvers, D.; Shi, H.; Martinez, G.T.; Van Aert, S.; Frenzel, J.; Van Humbeeck, J.
Title Nano- and microcrystal investigations of precipitates, interfaces and strain fields in Ni-Ti-Nb by various TEM techniques Type P1 Proceeding
Year 2013 Publication Materials science forum T2 – 9th European Symposium on Martensitic Transformations (ESOMAT 2012), SEP 09-16, 2012, St Petersburg, RUSSIA Abbreviated Journal
Volume 738/739 Issue Pages 65-71
Keywords P1 Proceeding; Electron microscopy for materials research (EMAT)
Abstract In the present contribution several advanced electron microscopy techniques are employed in order to describe chemical and structural features of the nano- and microstructure of a Ni45.5Ti45.5Nb9 alloy. A line-up of Nb-rich nano-precipitates is found in the Ni-Ti-rich austenite of as-cast material. Concentration changes of the matrix after annealing are correlated with changes in the transformation temperatures. The formation of rows and plates of larger Nb-rich precipitates and particles is described. The interaction of a twinned martensite plate with a Nb-rich nano-precipitate is discussed and the substitution of Nb atoms on the Ti-sublattice in the matrix is confirmed.
Address
Corporate Author Thesis
Publisher Place of Publication Lausanne Editor
Language Wos 000316089000011 Publication Date 2013-03-11
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1662-9752; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 2 Open Access
Notes Fwo Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:104692 Serial 2247
Permanent link to this record
 
 
Author Pardoen, T.; Colla, M.-S.; Idrissi, H.; Amin-Ahmadi, B.; Wang, B.; Schryvers, D.; Bhaskar, U.K.; Raskin, J.-P.
Title A versatile lab-on-chip test platform to characterize elementary deformation mechanisms and electromechanical couplings in nanoscopic objects Type A1 Journal article
Year 2016 Publication Comptes rendus : physique Abbreviated Journal Cr Phys
Volume 17 Issue 17 Pages 485-495
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract A nanomechanical on-chip test platform has recently been developed to deform under a variety of loading conditions freestanding thin films, ribbons and nanowires involving submicron dimensions. The lab-on-chip involves thousands of elementary test structures from which the elastic modulus, strength, strain hardening, fracture, creep properties can be extracted. The technique is amenable to in situ transmission electron microscopy (TEM) investigations to unravel the fundamental underlying deformation and fracture mechanisms that often lead to size-dependent effects in small-scale samples. The method allows addressing electrical and magnetic couplings as well in order to evaluate the impact of large mechanical stress levels on different solid-state physics phenomena. We had the chance to present this technique in details to Jacques Friedel in 2012 who, unsurprisingly, made a series of critical and very relevant suggestions. In the spirit of his legacy, the paper will address both mechanics of materials related phenomena and couplings with solids state physics issues.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000373524300020 Publication Date 2015-12-01
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1631-0705 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.048 Times cited 7 Open Access
Notes This research has been performed with the financial support of the “Politique scientifique fédérale” under the framework of the interuniversity attraction poles program, IAP7/21, as well as with the support of the “Communauté française de Belgique” under the program “Actions de recherche concertées” ARC 05/10-330 and ARC Convention No. 11/16-037. The support of the “Fonds belge pour la recherche dans l'industrie et l'agriculture (FRIA)” for M.-S. Colla is also gratefully acknowledged as are the FWO research projects G012012N “Understanding nanocrystalline mechanical behavior from structural investigations” for B. Amin-Ahmadi. Approved Most recent IF: 2.048
Call Number c:irua:129995 Serial 4014
Permanent link to this record
 
 
Author Gonnissen, J.; Batuk, D.; Nataf, G.F.; Jones, L.; Abakumov, A.M.; Van Aert, S.; Schryvers, D.; Salje, E.K.H.
Title Direct Observation of Ferroelectric Domain Walls in LiNbO3: Wall-Meanders, Kinks, and Local Electric Charges Type A1 Journal article
Year 2016 Publication Advanced functional materials Abbreviated Journal Adv Funct Mater
Volume 26 Issue 26 Pages 7599-7604
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Direct observations of the ferroelectric domain boundaries in LiNbO3 are performed using high-resolution high-angle annular dark field scanning transmission electron microscopy imaging, revealing a very narrow width of the domain wall between the 180° domains. The domain walls demonstrate local side-way meandering, which results in inclinations even when the overall wall orientation follows the ferroelectric polarization. These local meanders contain kinks with “head-to-head” and “tail-to-tail” dipolar configurations and are therefore locally charged. The charged meanders are confined to a few cation layers along the polarization direction and are separated by longer stretches of straight domain walls.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000388166700006 Publication Date 2016-09-16
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1616-301X ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 12.124 Times cited 23 Open Access
Notes J.G. acknowledges the support from the Research Foundation Flanders (FWO, Belgium) through various project fundings (G.0368.15N, G.0369.15N, and G.0374.13N), as well as the financial support from the European Union Seventh Framework Program (FP7/2007–2013) under Grant agreement no. 312483 (ESTEEM2). The authors thank J. Hadermann for useful suggestions on the interpretation of the HAADFSTEM images. E.K.H.S. thanks the EPSRC (EP/K009702/1) and the Leverhulme Trust (EM-2016-004) for support. G.F.N. thanks the National Research Fund, Luxembourg (FNR/P12/4853155/Kreisel) for support.; esteem2_jra2 Approved Most recent IF: 12.124
Call Number c:irua:135336 c:irua:135336 Serial 4129
Permanent link to this record
 
 
Author Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J.
Title Multiscale characterization of the work hardening mechanisms in Fe-Mn based TWIP steels Type A1 Journal article
Year 2012 Publication Steel research international Abbreviated Journal Steel Res Int
Volume 83 Issue 4 Pages 385-390
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract When strained in tension, high-manganese austenitic twinning induced plasticity (TWIP) steels achieve very high strength and elongation before necking. The main hypotheses available in the literature about the origin of their excellent work hardening include deformation twinning and dynamic strain ageing. In order to provide some answers, various experiments at different scales were conducted on FeMnC steels and the Fe28 wt%Mn3.5 wt%Al2.8 wt%Si alloy. At a macroscopic scale, tensile tests were performed on all the studied grades. It was shown that, though the FeMnAlSi based alloy retains very high elongation, the FeMnC steels properties are even more extraordinary. Tensile tests at different strain rates with the help of digital image correlation were also performed on the Fe20 wt%Mn1.2 wt%C steel to study the PLC effect occurring in this type of steel. It is suggested that supplementary hardening could come from reorientation of MnC pairs in the cores of the dislocations. At a microscopic scale, the Fe20 wt%Mn1.2 wt%C TWIP steel and the FeMnAlSi grade were thoroughly investigated by means of in situ TEM analysis. In the FeMnC steel, the formed twins could also lead to a composite effect, since they contain plenty of sessile dislocations. In the FeMnAlSi alloy, mechanical twins are thicker and contain fewer defects, leading to a lower work hardening than the other grade.
Address
Corporate Author Thesis
Publisher Verlag Stahleisen Place of Publication Düsseldorf Editor
Language Wos 000302471600016 Publication Date 2012-02-22
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1611-3683; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.235 Times cited 12 Open Access
Notes Approved Most recent IF: 1.235; 2012 IF: 0.493
Call Number UA @ lucian @ c:irua:97391 Serial 2239
Permanent link to this record
 
 
Author Idrissi, H.; Renard, K.; Schryvers, D.; Jacques, P.J.
Title TEM investigation of the formation mechanism of deformation twins in Fe-Mn-Si-Al TWIP steels Type A1 Journal article
Year 2013 Publication Philosophical magazine Abbreviated Journal Philos Mag
Volume 93 Issue 35 Pages 4378-4391
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract The microstructure of a Fe-Mn-Si-Al twinning-induced plasticity (TWIP) steel exhibiting remarkable work hardening rate under uniaxial tensile deformation was investigated using transmission electron microscopy to uncover the mechanism(s) controlling the nucleation and growth of the mechanically induced twins. The results show that the stair-rod cross-slip deviation mechanism is necessary for the formation of the twins, while large extrinsic stacking faults homogenously distributed within the grains could act as preferential sources for the activation of the deviation process. The influence of such features on the thickness and strength of the twins and the resulting mechanical behaviour is discussed and compared to similar works recently performed on Fe-Mn-C TWIP steels.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000327478300005 Publication Date 2013-09-12
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1478-6435;1478-6443; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.505 Times cited 15 Open Access
Notes Approved Most recent IF: 1.505; 2013 IF: 1.427
Call Number UA @ lucian @ c:irua:112815 Serial 3478
Permanent link to this record
 
 
Author Delville, R.; Kasinathan, S.; Zhang, Z.; van Humbeeck, J.; James, R.D.; Schryvers, D.
Title Transmission electron microscopy study of phase compatibility in low hysteresis shape memory alloys Type A1 Journal article
Year 2010 Publication Philosophical magazine Abbreviated Journal Philos Mag
Volume 90 Issue 1/4 Pages 177-195
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Recent findings have linked low hysteresis in shape memory alloys with phase compatibility between austenite and martensite. To investigate the evolution of microstructure as phase compatibility increases and hysteresis is reduced, transmission electron microscopy was used to study the alloy system Ti50Ni50xPdx, where the composition is systemically tuned to approach perfect compatibility. Changes in morphology, twinning density and twinning modes are reported, along with special microstructures occurring when compatibility is achieved. In addition, the interface between austenite and a single variant of martensite was studied by high-resolution and conventional electron microscopy. The low energy configuration of the interface detailed in this article suggests that it plays an important role in the lowering of hysteresis compared to classical habit plane interfaces.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000274576500013 Publication Date 2010-01-16
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1478-6435;1478-6443; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.505 Times cited 70 Open Access
Notes Multimat; FWO Approved Most recent IF: 1.505; 2010 IF: 1.304
Call Number UA @ lucian @ c:irua:79859 Serial 3718
Permanent link to this record
 
 
Author Penders, A.; Konstantinovic, M.J.; Bosch, R.W.; Schryvers, D.
Title Crack initiation in tapered high Si stainless steel specimens : stress threshold analyses Type A1 Journal article
Year 2020 Publication Corrosion Engineering Science And Technology Abbreviated Journal Corros Eng Sci Techn
Volume Issue Pages 1-8
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Tapered specimens were used for an accelerated test technique to study the crack initiation of high Si stainless steel by means of constant elongation rate tensile testing in a simulated pressurised water reactor environment. Detailed crack density distributions were obtained by applying an advanced crack detection algorithm on iteratively displaced scanning electron microscopy pictures featuring stress corrosion cracks along the specimen's gauge length. By means of finite-element analysis, prominent peaks in the crack density graphs are demonstrated to be related to stress relief and stress build-up during the crack initiation phase. Intrinsic scatter related to the crack detection suggests that stress corrosion cracking is independent of the strain-rate for strain-rates lower than 10(-6 )s(-1). Based on the extrapolation to constant load conditions, the critical threshold value for the duplex high Si stainless steel is estimated to be around 580 MPa.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000549651600001 Publication Date 2020-06-30
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1478-422x ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.8 Times cited 1 Open Access Not_Open_Access
Notes ; We would like to acknowledge ENGIE Electrabel for the financial support of this work under the contract number BSUEZ5500. ; Approved Most recent IF: 1.8; 2020 IF: 0.879
Call Number UA @ admin @ c:irua:171292 Serial 6478
Permanent link to this record
 
 
Author Penders, A.; Konstantinovic, M.J.; Van Renterghem, W.; Bosch, R.W.; Schryvers, D.
Title TEM investigation of SCC crack tips in high Si stainless steel tapered specimens Type A1 Journal article
Year 2021 Publication Corrosion Engineering Science And Technology Abbreviated Journal Corros Eng Sci Techn
Volume Issue Pages
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract The stress corrosion cracking (SCC) mechanism is investigated in high Si duplex stainless steel in a simulated PWR environment based on TEM analysis of FIB-extracted SCC crack tips. The microstructural investigation in the near vicinity of SCC crack tips illustrates a strain-rate dependence in SCC mechanisms. Detailed analysis of the crack tip morphology, that includes crack tip oxidation and surrounding deformation field, indicates the existence of an interplay between corrosion- and deformation-driven failure as a function of the strain rate. Slow strain-rate crack tips exhibit a narrow cleavage failure which can be linked to the film-induced failure mechanism, while rounded shaped crack tips for faster strain rates could be related to the strain-induced failure. As a result, two nominal strain-rate-dependent failure regimes dominated either by corrosion or deformation-driven cracking mechanisms can be distinguished.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000695956400001 Publication Date 2021-09-14
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1478-422x ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 0.879 Times cited Open Access OpenAccess
Notes Approved Most recent IF: 0.879
Call Number UA @ admin @ c:irua:181533 Serial 6892
Permanent link to this record
 
 
Author Tirry, W.; Schryvers, D.
Title Linking a completely three-dimensional nanostrain to a structural transformation eigenstrain Type A1 Journal article
Year 2009 Publication Nature materials Abbreviated Journal Nat Mater
Volume 8 Issue 9 Pages 752-757
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract NiTi is one of the most popular shape-memory alloys, a phenomenon resulting from a martensitic transformation. Commercial NiTi-based alloys are often thermally treated to contain Ni4Ti3 precipitates. The presence of these precipitates can introduce an extra transformation step related to the so-called R-phase. It is believed that the strain field surrounding the precipitates, caused by the matrixprecipitate lattice mismatch, lies at the origin of this intermediate transformation step. Atomic-resolution transmission electron microscopy in combination with geometrical phase analysis is used to measure the elastic strain field surrounding these precipitates. By combining measurements from two different crystallographic directions, the three-dimensional strain matrix is determined from two-dimensional measurements. Comparison of the measured strain matrix to the eigenstrain of the R-phase shows that both are very similar and that the introduction of the R-phase might indeed compensate the elastic strain introduced by the precipitate.
Address
Corporate Author Thesis
Publisher Place of Publication London Editor
Language Wos 000269215500022 Publication Date 2009-06-21
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1476-1122;1476-4660; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 39.737 Times cited 53 Open Access
Notes Multimat Approved Most recent IF: 39.737; 2009 IF: 29.504
Call Number UA @ lucian @ c:irua:77657 Serial 1822
Permanent link to this record
 
 
Author Schryvers, D.; Cao, S.; Tirry, W.; Idrissi, H.; Van Aert, S.
Title Advanced three-dimensional electron microscopy techniques in the quest for better structural and functional materials Type A1 Journal article
Year 2013 Publication Science and technology of advanced materials Abbreviated Journal Sci Technol Adv Mat
Volume 14 Issue 1 Pages 014206-14213
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract After a short review of electron tomography techniques for materials science, this overview will cover some recent results on different shape memory and nanostructured metallic systems obtained by various three-dimensional (3D) electron imaging techniques. In binary NiTi, the 3D morphology and distribution of Ni4Ti3 precipitates are investigated by using FIB/SEM slice-and-view yielding 3D data stacks. Different quantification techniques will be presented including the principal ellipsoid for a given precipitate, shape classification following a Zingg scheme, particle distribution function, distance transform and water penetration. The latter is a novel approach to quantifying the expected matrix transformation in between the precipitates. The different samples investigated include a single crystal annealed with and without compression yielding layered and autocatalytic precipitation, respectively, and a polycrystal revealing different densities and sizes of the precipitates resulting in a multistage transformation process. Electron tomography was used to understand the interaction between focused ion beam-induced Frank loops and long dislocation structures in nanobeams of Al exhibiting special mechanical behaviour measured by on-chip deposition. Atomic resolution electron tomography is demonstrated on Ag nanoparticles in an Al matrix.
Address
Corporate Author Thesis
Publisher Place of Publication Sendai Editor
Language Wos 000316463800008 Publication Date 2013-03-13
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1468-6996;1878-5514; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.798 Times cited 6 Open Access
Notes Fwo; Iap; Esteem Approved Most recent IF: 3.798; 2013 IF: 2.613
Call Number UA @ lucian @ c:irua:107343 Serial 77
Permanent link to this record
 
 
Author Chen, Z.; Tan, Z.; Ji, G.; Schryvers, D.; Ouyang, Q.; Li, Z.
Title Effect of interface evolution on thermal conductivity of vacuum hot pressed SiC/Al composites Type A1 Journal article
Year 2015 Publication Advanced engineering materials Abbreviated Journal Adv Eng Mater
Volume 17 Issue 17 Pages 1076-1084
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract The SiC/Al composites have been fabricated by a vacuum hot pressing (VHP) process in order to study the effect of interface evolution on the global thermal conductivity (TC). By optimizing the VHP parameters of sintering temperature and time, the three different kinds of SiC/Al interface configurations, that is, non-bonded, diffusion-bonded, and reaction-bonded interfaces, are formed and identified by measurement of relative density, X-ray diffraction, scanning and (high-resolution) transmission electron microscopy. The VHPed composite sintered at 655 °C for 60 min is fully dense and presents a tightly-adhered and clean SiC/Al interface at the nanoscale, the ideal diffusion-bonded interface being the most favorable for minimizing interfacial thermal resistance, which in turn results in the highest TC of around 270 W/mK.
Address
Corporate Author Thesis
Publisher Place of Publication Weinheim Editor
Language Wos 000357680700019 Publication Date 2015-01-02
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1438-1656; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.319 Times cited 9 Open Access
Notes Approved Most recent IF: 2.319; 2015 IF: 1.758
Call Number c:irua:123000 Serial 818
Permanent link to this record
 
 
Author Bals, S.; Tirry, W.; Geurts, R.; Yang, Z.; Schryvers, D.
Title High-quality sample preparation by low kV FIB thinning for analytical TEM measurements Type A1 Journal article
Year 2007 Publication Microscopy and microanalysis Abbreviated Journal Microsc Microanal
Volume 13 Issue 2 Pages 80-86
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Focused ion beam specimen preparation has been used for NiTi samples and SrTiO(3)/SrRuO(3) multilayers with prevention of surface amorphization and Ga implantation by a 2-kV cleaning procedure. Transmission electron microscopy techniques show that the samples are of high quality with a controlled thickness over large scales. Furthermore, preferential thinning effects in multicompounds are avoided, which is important when analytical transmission electron microscopy measurements need to be interpreted in a quantitative manner. The results are compared to similar measurements acquired for samples obtained using conventional preparation techniques such as electropolishing for alloys and ion milling for oxides.
Address
Corporate Author Thesis
Publisher Place of Publication Cambridge, Mass. Editor
Language Wos 000245662200002 Publication Date 2007-03-19
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1431-9276;1435-8115; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.891 Times cited 82 Open Access
Notes Fwo; Goa Approved Most recent IF: 1.891; 2007 IF: 1.941
Call Number UA @ lucian @ c:irua:65850 Serial 1441
Permanent link to this record
 
 
Author Lu, J.; Roeffaers, M.B.J.; Bartholomeeusen, E.; Sels, B.F.; Schryvers, D.
Title Intergrowth of components and ramps in coffin-shaped ZSM-5 zeolite crystals unraveled by focused ion beam-assisted transmission electron microscopy Type A1 Journal article
Year 2014 Publication Microscopy and microanalysis Abbreviated Journal Microsc Microanal
Volume 20 Issue 1 Pages 42-49
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Scanning electron microscopy, focused ion beam (FIB), and transmission electron microscopy are combined to study the intergrowth of 90 degrees rotational components and of ramps in coffin-shaped ZSM-5 crystals. The 90 degrees rotational boundaries with local zig-zag features between different intergrowth components are observed in the main part of crystal. Also a new kind of displacement boundary is described. At the displacement boundary there is a shift of the unit cells along the boundary without a change in orientation. Based on lamellae prepared with FIB from different positions of the ramps and crystal, the orientation relationships between ramps and the main part of the crystal are studied and the three-dimensional morphology and growth mechanism of the ramp are illustrated.
Address
Corporate Author Thesis
Publisher Place of Publication Cambridge, Mass. Editor
Language Wos 000335378400006 Publication Date 2013-11-05
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1431-9276;1435-8115; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.891 Times cited 7 Open Access
Notes Approved Most recent IF: 1.891; 2014 IF: 1.877
Call Number UA @ lucian @ c:irua:117688 Serial 1697
Permanent link to this record
 
 
Author Tian, H.; Schryvers, D.; Shabalovskaya, S.; van Humbeeck, J.
Title Microstructure of surface and subsurface layers of a Ni-Ti shape memory microwire Type A1 Journal article
Year 2009 Publication Microscopy and microanalysis Abbreviated Journal Microsc Microanal
Volume 15 Issue Pages 62-70
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract The microstructure of a 55 Êm diameter, cold-worked Ni-Ti microwire is investigated by different transmission electron microscopy techniques. The surface consists of a few hundred nanometer thick oxide layer composed of TiO and TiO2 with a small fraction of inhomogeneously distributed Ni. The interior of the wire has a core-shell structure with primarily B2 grains in the 1 Êm thick shell, and heavily twinned B19 martensite in the core. This core-shell structure can be explained by a concentration gradient of the alloying elements resulting in a structure separation due to the strong temperature dependence of the martensitic start temperature. Moreover, in between the B2 part of the metallic core-shell and the oxide layer, a Ni3Ti interfacial layer is detected.
Address
Corporate Author Thesis
Publisher Place of Publication Cambridge, Mass. Editor
Language Wos 000262912700009 Publication Date 2009-01-15
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1431-9276;1435-8115; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.891 Times cited 15 Open Access
Notes FWO G.0465.05; Multimat Approved Most recent IF: 1.891; 2009 IF: 3.035
Call Number UA @ lucian @ c:irua:72319 Serial 2074
Permanent link to this record
 
 
Author Grieten, E.; Caen, J.; Schryvers, D.
Title Optimal sample preparation to characterize corrosion in historical photographs with analytical TEM Type A1 Journal article
Year 2014 Publication Microscopy and microanalysis Abbreviated Journal Microsc Microanal
Volume 20 Issue 5 Pages 1585-1590
Keywords A1 Journal article; Electron microscopy for materials research (EMAT); Antwerp Cultural Heritage Sciences (ARCHES)
Abstract An alternative focused ion beam preparation method is used for sampling historical photographs containing metallic nanoparticles in a polymer matrix. We use the preparation steps of classical ultra-microtomy with an alternative final sectioning with a focused ion beam. Transmission electron microscopy techniques show that the lamella has a uniform thickness, which is an important factor for analytical transmission electron microscopy. Furthermore, the method maintains the spatial distribution of nanoparticles in the soft matrix. The results are compared with traditional preparation techniques such as ultra-microtomy and classical focused ion beam milling.
Address
Corporate Author Thesis
Publisher Place of Publication Cambridge, Mass. Editor
Language Wos 000345742900031 Publication Date 2014-09-26
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1431-9276;1435-8115; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.891 Times cited Open Access
Notes Approved Most recent IF: 1.891; 2014 IF: 1.877
Call Number UA @ lucian @ c:irua:118481 Serial 2484
Permanent link to this record
 
 
Author Idrissi, H.; Turner, S.; Mitsuhara, M.; Wang, B.; Hata, S.; Coulombier, M.; Raskin, J.-P.; Pardoen, T.; Van Tendeloo, G.; Schryvers, D.
Title Point defect clusters and dislocations in FIB irradiated nanocrystalline aluminum films : an electron tomography and aberration-corrected high-resolution ADF-STEM study Type A1 Journal article
Year 2011 Publication Microscopy and microanalysis Abbreviated Journal Microsc Microanal
Volume 17 Issue 6 Pages 983-990
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Focused ion beam (FIB) induced damage in nanocrystalline Al thin films has been characterized using advanced transmission electron microscopy techniques. Electron tomography was used to analyze the three-dimensional distribution of point defect clusters induced by FIB milling, as well as their interaction with preexisting dislocations generated by internal stresses in the Al films. The atomic structure of interstitial Frank loops induced by irradiation, as well as the core structure of Frank dislocations, has been resolved with aberration-corrected high-resolution annular dark-field scanning TEM. The combination of both techniques constitutes a powerful tool for the study of the intrinsic structural properties of point defect clusters as well as the interaction of these defects with preexisting or deformation dislocations in irradiated bulk or nanostructured materials.
Address
Corporate Author Thesis
Publisher Place of Publication Cambridge, Mass. Editor
Language Wos 000297832300018 Publication Date 2011-10-27
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1431-9276;1435-8115; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.891 Times cited 25 Open Access
Notes Iap; Fwo Approved Most recent IF: 1.891; 2011 IF: 3.007
Call Number UA @ lucian @ c:irua:93627 Serial 2653
Permanent link to this record
 
 
Author Heidari, H.; Rivero, G.; Idrissi, H.; Ramachandran, D.; Cakir, S.; Egoavil, R.; Kurttepeli, M.; Crabbé, A.C.; Hauffman, T.; Terryn, H.; Du Prez, F.; Schryvers, D.
Title Melamine–Formaldehyde Microcapsules: Micro- and Nanostructural Characterization with Electron Microscopy Type A1 Journal article
Year 2016 Publication Microscopy and microanalysis Abbreviated Journal Microsc Microanal
Volume 22 Issue 22 Pages 1222-1232
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract A systematic study has been carried out to compare the surface morphology, shell thickness, mechanical properties, and binding behavior of melamine–formaldehyde microcapsules of 5–30 μm diameter size with various amounts of core content by using scanning and transmission electron microscopy including electron tomography, in situ nanomechanical tensile testing, and electron energy-loss spectroscopy. It is found that porosities are present on the outside surface of the capsule shell, but not on the inner surface of the shell. Nanomechanical tensile tests on the capsule shells reveal that Young’s modulus of the shell material is higher than that of bulk melamine–formaldehyde and that the shells exhibit a larger fracture strain compared with the bulk. Core-loss elemental analysis of microcapsules embedded in epoxy indicates that during the curing process, the microcapsule-matrix interface remains uniform and the epoxy matrix penetrates into the surface micro-porosities of the capsule shells.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000393853100011 Publication Date 2016-12-21
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1431-9276 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.891 Times cited 2 Open Access
Notes This work was supported by SIM vzw, Technologiepark 935, BE-9052 Zwijnaarde, Belgium, within the InterPoCo project of the H-INT-S horizontal program. The authors are also thankful to Stijn Van den Broeck and Dr. Frederic Leroux for help in sample preparation and to S. Bals and J. Verbeeck for valuable discussions. H.I. acknowledges the IAP program of the Belgian State Federal Office for Scientific, Technical and Cultural Affairs, under Contract No. P7/21. Approved Most recent IF: 1.891
Call Number EMAT @ emat @ c:irua:138980 Serial 4333
Permanent link to this record
 
 
Author Yang, Z.; Schryvers, D.
Title Composition gradients surrounding Ni4Ti3 precipitates in a NiTi alloy studied by EELS, EFTEM and EDX Type A1 Journal article
Year 2006 Publication International journal of applied electromagnetics and mechanics Abbreviated Journal Int J Appl Electrom
Volume 23 Issue 1/2 Pages 17-24
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Amsterdam Editor
Language Wos Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1383-5416 ISBN Additional Links UA library record; WoS full record;
Impact Factor 0.769 Times cited Open Access
Notes Approved Most recent IF: 0.769; 2006 IF: 0.262
Call Number UA @ lucian @ c:irua:59610 Serial 443
Permanent link to this record
 
 
Author Muto, S.; Merk, N.; Schryvers, D.; Tanner, L.E.
Title Displacive-replacive phase transformation in a Ni62.5Al37.5 phase studies by HREM and microdiffraction Type A1 Journal article
Year 1993 Publication Philosophical magazine: B: physics of condensed matter: electronic, optical and magnetic properties Abbreviated Journal
Volume 67 Issue 5 Pages 673-689
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract The structure of the metastable Ni2Al phase, which has long been a matter of controversy, has been carefully re-examined by means of high-resolution transmission electron microscopy (HREM) and electron microdiffraction. First, it is concluded that theas-quenched NixAl100-x(60 less-than-or-equal-to x less-than-or-equal-to 65) material already exhibits a partial omega-type collapse in a one-dimensional fashion which and is consistent with the anomalous dip in the phonon dispersion curve. Ni2Al precipitates are formed on annealing by thermal decomposition of the high-temperature NixAl100-xB2 phase and still retain the small omega-type shuffle. The amount of displacement in the well developed Ni2Al phase was estimated to be between 20 and 50% of the ideal omega collapse; this was determined by means of a combined technique of HREM and microdiffraction together with dynamical calculations of HREM images and diffraction intensities.
Address
Corporate Author Thesis
Publisher Place of Publication London Editor
Language Wos A1993LF72000005 Publication Date 2007-07-08
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1364-2812;1463-6417; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 16 Open Access
Notes Approved no
Call Number UA @ lucian @ c:irua:6776 Serial 740
Permanent link to this record
 
 
Author Bartholomeeusen, E.; De Cremer, G.; Kennes, K.; Hammond, C.; Hermans, I.; Lu, J.-B.; Schryvers, D.; Jacobs, P.A.; Roeffaers, M.B.J.; Hofkens, J.; Sels, B.F.; Coutino-Gonzalez, E.
Title Optical encoding of luminescent carbon nanodots in confined spaces Type A1 Journal article
Year 2021 Publication Chemical Communications Abbreviated Journal Chem Commun
Volume 57 Issue 90 Pages 11952-11955
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Stable emissive carbon nanodots were generated in zeolite crystals using near infrared photon irradiation gradually converting the occluded organic template, originally used to synthesize the zeolite crystals, into discrete luminescent species consisting of nano-sized carbogenic fluorophores, as ascertained using Raman microscopy, and steady-state and time-resolved spectroscopic techniques. Photoactivation in a confocal laser fluorescence microscope allows 3D resolved writing of luminescent carbon nanodot patterns inside zeolites providing a cost-effective and non-toxic alternative to previously reported metal-based nanoclusters confined in zeolites, and opens up opportunities in bio-labelling and sensing applications.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000711122000001 Publication Date 2021-10-26
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1359-7345; 1364-548x ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 6.319 Times cited Open Access Not_Open_Access
Notes Approved Most recent IF: 6.319
Call Number UA @ admin @ c:irua:184147 Serial 6876
Permanent link to this record
 
 
Author Yang, Z.; Tirry, W.; Schryvers, D.
Title Analytical TEM investigations on concentration gradients surrounding Ni4Ti3 precipitates in Ni-Ti shape memory material Type A1 Journal article
Year 2005 Publication Scripta materialia Abbreviated Journal Scripta Mater
Volume 52 Issue 11 Pages 1129-1134
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000228190200010 Publication Date 2005-03-16
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 49 Open Access
Notes GOA project; MCRTN-FP6-505226 Multimat Approved Most recent IF: 3.747; 2005 IF: 2.228
Call Number UA @ lucian @ c:irua:55687 Serial 110
Permanent link to this record
 
 
Author Li, K.; Béché, A.; Song, M.; Sha, G.; Lu, X.; Zhang, K.; Du, Y.; Ringer, S.P.; Schryvers, D.
Title Atomistic structure of Cu-containing \beta" precipitates in an Al-Mg-Si-Cu alloy Type A1 Journal article
Year 2014 Publication Scripta materialia Abbreviated Journal Scripta Mater
Volume 75 Issue Pages 86-89
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract The beta '' precipitates in a peak-aged Al-Mg-Si-Cu alloy were measured with an average composition of 28.6Al-38.7Mg-26.5Si-5.17Cu (at.%) using atom probe tomography. High-angle annular dark-field observations revealed that Cu incompletely substitutes for the Mg-1 and Si-3 columns, preferentially for one column in each pair of Si-3. Cu-free Si columns form a parallelogram-shaped network that constitutes the basis of subsequent precipitates in the system, with a = 0.37 nm, b = 0.38 nm, gamma = 113 degrees and c = 0.405 nm. (C) 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000331025200022 Publication Date 2013-12-07
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 22 Open Access
Notes Approved Most recent IF: 3.747; 2014 IF: 3.224
Call Number UA @ lucian @ c:irua:115749 Serial 201
Permanent link to this record
 
 
Author Santamarta, R.; Schryvers, D.
Title Effect of amorphous-crystalline interfaces on the martensitic transformation in Ti50Ni25Cu25 Type A1 Journal article
Year 2004 Publication Scripta materialia Abbreviated Journal Scripta Mater
Volume 50 Issue Pages 1423-1427
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000221009500002 Publication Date 2004-04-13
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 29 Open Access
Notes Approved Most recent IF: 3.747; 2004 IF: 2.112
Call Number UA @ lucian @ c:irua:48379 Serial 795
Permanent link to this record
 
 
Author Shi, H.; Pourbabak, S.; Van Humbeeck, J.; Schryvers, D.
Title Electron microscopy study of Nb-rich nanoprecipitates in NiTiNb and their influence on the martensitic transformation Type A1 Journal article
Year 2012 Publication Scripta materialia Abbreviated Journal Scripta Mater
Volume 67 Issue 12 Pages 939-942
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Nb-rich nanoprecipitates in the matrix of an annealed commercial NiTiNb alloy are investigated by scanning and transmission electron microscopy, including slice-and-view and chemical analysis. The precipitates have a diameter of around 100 nm, are faceted and have a cube-on-cube relation with the B2 matrix. In situ TEM cooling shows that the martensitic transformation is hampered by the presence of these precipitates. The latter could explain the increase in hysteresis when compared with the binary system.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000311135000005 Publication Date 2012-08-27
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 29 Open Access
Notes Fwo Approved Most recent IF: 3.747; 2012 IF: 2.821
Call Number UA @ lucian @ c:irua:101486 Serial 971
Permanent link to this record
 
 
Author Cao, S.; Somsen, C.; Croitoru, M.; Schryvers, D.; Eggeler, G.
Title Focused ion beam/scanning electron microscopy tomography and conventional transmission electron microscopy assessment of Ni4Ti3 morphology in compression-aged Ni-rich Ni-Ti single crystals Type A1 Journal article
Year 2010 Publication Scripta materialia Abbreviated Journal Scripta Mater
Volume 62 Issue 6 Pages 399-402
Keywords A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
Abstract The size, morphology and configuration of Ni4Ti3 precipitates in a single-crystal NiTi alloy have been investigated by two-dimensional transmission electron microscopy-based image analysis and three-dimensional reconstruction from slice-and-view images obtained in a focused ion beam/scanning electron microscopy (FIB/SEM) dual-beam system. Average distances between the precipitates measured along the compression direction correlate well between both techniques, while particle shape and configuration data is best obtained from FIB/SEM. Precipitates form pockets of B2 of 0.54 ìm in the compression direction and 1 ìm perpendicular to the compression direction.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000275072700020 Publication Date 2009-12-04
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 16 Open Access
Notes Fwo Approved Most recent IF: 3.747; 2010 IF: 2.820
Call Number UA @ lucian @ c:irua:79817 Serial 1246
Permanent link to this record
 
 
Author Schryvers, D.; Lahjouji, D.E.; Slootmaekers, B.; Potapov, P.L.
Title HREM investigation of martensite precursor effects and stacking sequences in Ni-Mn-Ti alloys Type A1 Journal article
Year 1996 Publication Scripta metallurgica et materialia Abbreviated Journal Scripta Mater
Volume 35 Issue Pages 1235-1241
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication New York Editor
Language Wos A1996VL92800019 Publication Date 2002-07-26
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN (down) 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.224 Times cited 2 Open Access
Notes Approved no
Call Number UA @ lucian @ c:irua:15427 Serial 1506
Permanent link to this record