NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	1–30 of 69 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 >>

List View

Citations

Details

	Records
	Author	Sheath, B.C.; Xu, X.; Manuel, P.; Hadermann, J.; Batuk, M.; O'Sullivan, J.; Bonilla, R.S.; Clarke, S.J.
	Title	Structures and magnetic ordering in layered Cr oxide arsenides Sr₂CrO₂Cr₂OAs₂ and Sr₂CrO₃CrAs			Type	A1 Journal article
	Year	2022	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	61	Issue	31	Pages	10-12385
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Two novel chromium oxide arsenide materials have been synthesized, Sr2CrO2Cr2OAs2 (i.e., Sr2Cr3As2O3) and Sr2CrO3CrAs (i.e., Sr2Cr2AsO3), both of which contain chromium ions in two distinct layers. Sr2CrO2Cr2OAs2 was targeted following electron microscopy measurements on a related phase. It crystallizes in the space group P4/mmm and accommodates distorted CrO4As2 octahedra containing Cr2+ and distorted CrO(2)As(4 )octahedra containing Cr3+. In contrast, Sr2CrO3CrAs incorporates Cr3+ in CrO5 square-pyramidal coordination in [Sr2CrO3](+) layers and Cr2+ ions in CrAs(4 )tetrahedra in [CrAs](-) layers and crystallizes in the space group P4/nmm. Powder neutron diffraction data reveal antiferromagnetic ordering in both compounds. In Sr2CrO3CrAs the Cr2+ moments in the [CrAs](-) layers exhibit long-range ordering, while the Cr3+ moments in the [Sr2CrO3](+) layers only exhibit short-range ordering. However, in Sr2CrO2Cr2OAs2, both the Cr(2+ )moments in the CrO4As2 environments and the Cr3+ moments in the CrO2As4 polyhedra are long-range-ordered below 530(10) K. Above this temperature, only the Cr3+ moments are ordered with a Neel temperature slightly in excess of 600 K. A subtle structural change is evident in Sr2CrO2Cr2OAs2 below the magnetic ordering transitions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000841943600001	Publication Date	2022-07-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.6	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 4.6
	Call Number	UA @ admin @ c:irua:190007			Serial	7215
Permanent link to this record



	Author	Loreto, S.; Vanrompay, H.; Mertens, M.; Bals, S.; Meynen, V.
	Title	The influence of acids on tuning the pore size of mesoporous TiO₂ templated by non-ionic block copolymers			Type	A1 Journal article
	Year	2018	Publication	European journal of inorganic chemistry	Abbreviated Journal	Eur J Inorg Chem
	Volume	2018	Issue	2018	Pages	62-65
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	<script type='text/javascript'>document.write(unpmarked('We show the possibility to tune the pore size of mesoporous TiO2 templated by non-ionic block copolymers by adding different inorganic acids at well-chosen concentration. The effect of the inorganic anions on both the TiO2 cluster formation and the non-ionic block copolymers micelles is investigated to explain the experimental results.'));
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000419706000008	Publication Date	2017-12-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1434-1948	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.444	Times cited	6	Open Access	OpenAccess
	Notes	; This work was supported by the Research Foundation-Flanders (FWO) (grant G.0687.13) and the University of Antwerp (BOF project). Hans Vanrompay gratefully acknowledges financial support by the Flemish Fund for Scientific Research (FWO grant 1S32617N). Sara Bals acknowledges financial support from European Research Council (ERC Starting Grant #335078-COLOURATOMS). ; ecas_Sara			Approved	Most recent IF: 2.444
	Call Number	UA @ lucian @ c:irua:147897UA @ admin @ c:irua:147897			Serial	4881
Permanent link to this record



	Author	Oleynikov, P.N.; Shpanchenko, R.V.; Rozova, M.G.; Abakumov, A.M.; Antipov, E.V.; Hadermann, J.; Lebedev, O.I.; Van Tendeloo, G.
	Title	Synthesis and structure of fluorinated RBa₂Cu₂O_6+. (R=Dy, Ho and Tm) phases			Type	A1 Journal article
	Year	2001	Publication	Russian journal of inorganic chemistry	Abbreviated Journal	Russ J Inorg Chem+
	Volume	46	Issue	2	Pages	153-158
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0036-0236	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	0.787	Times cited		Open Access
	Notes				Approved	Most recent IF: 0.787; 2001 IF: NA
	Call Number	UA @ lucian @ c:irua:36045			Serial	3443
Permanent link to this record



	Author	Daniel, P.; Barbey, L.; Groult, D.; Nguyen, N.; Van Tendeloo, G.; Raveau, B.
	Title	Mixed valent iron oxides with the 0201-1201 intergrowth structure: (Pb_1-xTl_x)Sr₄Fe₂O₉ (0≤x≤1)			Type	A1 Journal article
	Year	1994	Publication	European journal of solid state and inorganic chemistry	Abbreviated Journal
	Volume	31	Issue		Pages	235-244
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Paris	Editor
	Language		Wos	A1994NQ48700004	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0992-4361	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	12	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:10030			Serial	2093
Permanent link to this record



	Author	Bontchev, R.; Darriet, B.; Darriet, J.; Weill, F.; Van Tendeloo, G.; Amelinckx, S.
	Title	New cation deficient perovskite-like oxides in the system La₄Ti₃O₁₂-LaTiO₃			Type	A1 Journal article
	Year	1993	Publication	European journal of solid state and inorganic chemistry	Abbreviated Journal
	Volume	30	Issue		Pages	521-537
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Paris	Editor
	Language		Wos	A1993LH73600003	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0992-4361	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	19	Open Access
	Notes				Approved	CHEMISTRY, PHYSICAL 77/144 Q3 # MATHEMATICS, INTERDISCIPLINARY 19/101 Q1 # PHYSICS, ATOMIC, MOLECULAR & CHEMICAL 17/35 Q2 #
	Call Number	UA @ lucian @ c:irua:6834			Serial	2307
Permanent link to this record



	Author	Kirsanova, M.A.; Mori, T.; Maruyama, S.; Matveeva; Batuk, D.; Abakumov, A.M.; Gerasimenko, A.V.; Olenev, A.V.; Grin, Y.; Shevelkov, A.V.
	Title	Synthesis, structure, and transport properties of type-I derived clathrate Ge_46-xP_xSe_8-y (x=15.4(1); y=0-2.65) with diverse host-guest bonding			Type	A1 Journal article
	Year	2013	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	52	Issue	2	Pages	577-588
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A first clathrate compound with selenium guest atoms, [Ge46-xPx]Se8-y square(y) (x = 15.4(1); y = 0-2.65; square denotes a vacancy), was synthesized as a single-phase and structurally characterized. It crystallizes in the space group Fm (3) over bar with the unit cell parameter a varying from 20.310(2) to 20.406(2) angstrom and corresponding to a 2 x 2 x 2 supercell of a usual clathrate-I structure. The superstructure is formed due to the symmetrical arrangement of the three-bonded framework atoms appearing as a result of the framework transformation of the parent clathrate-I structure. Selenium guest atoms occupy two types of polyhedral cages inside the positively charged framework; all selenium atoms in the larger cages form a single covalent bond with the framework atoms, relating the title compounds to a scanty family of semiclathrates. According to the measurements of electrical resistivity and Seebeck coefficient, [Ge46-xPx]Se8-y square(y) is an n-type semiconductor with E-g = 0.41 eV for x = 15.4(1) and y = 0; it demonstrates the maximal thermoelectric power factor of 2.3 x 10(-5) W K-2 m(-1) at 660 K.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000314007500010	Publication Date	2012-12-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	14	Open Access
	Notes				Approved	Most recent IF: 4.857; 2013 IF: 4.794
	Call Number	UA @ lucian @ c:irua:107689			Serial	3463
Permanent link to this record



	Author	Wang, C.; Xin, X.; Shu, M.; Huang, S.; Zhang, Y.; Li, X.
	Title	Scalable synthesis of one-dimensional Na₂Li₂Ti₆O₁₄ nanofibers as ultrahigh rate capability anodes for lithium-ion batteries			Type	A1 Journal article
	Year	2019	Publication	Inorganic Chemistry Frontiers	Abbreviated Journal	Inorg Chem Front
	Volume	6	Issue	3	Pages	646-653
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Carbon anode materials for Li-ion batteries have been operated close to their theoretical rate and cycle limits. Therefore, titanium-based materials have attracted great attention due to their high stability. Here, Na2Li2Ti6O14 nanofibers as anode materials were prepared through a controlled electrospinning method. The Na2Li2Ti6O14 nanofibers presented superior electrochemical performance with high rate capability and long cycle life and can be regarded as a competitive anode candidate for advanced Li-ion batteries. One-dimensional (1D) Na2Li2Ti6O14 nanofibers are able to deliver a capacity of 128.5 mA h g(-1) at 0.5C, and demonstrate superior high-rate charge-discharge capability and cycling stability (the reversible charge capacity is 77.8 mA h g(-1) with a capacity retention of 99.45% at the rate of 10C after 800 cycles). The 1D structure is considered to contribute remarkably to increased rate capability and stability. This simple and scalable method indicates that the Na2Li2Ti6O14 nanofibers have a practical application potential for high performance lithium-ion batteries.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000461092500027	Publication Date	2018-11-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2052-1553	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.036	Times cited	3	Open Access	Not_Open_Access
	Notes	; The authors acknowledge financial support from the National Natural Science Foundation of China (21571110), Natural Science Foundation of Zhejiang Province (LY18B010003), and the Ningbo Key Innovation Team (2014B81005), and sponsorship by the K.C. Wong Magna Fund in Ningbo University. ;			Approved	Most recent IF: 4.036
	Call Number	UA @ admin @ c:irua:158566			Serial	5258
Permanent link to this record



	Author	Batuk, D.; Batuk, M.; Filimonov, D.S.; Zakharov, K.V.; Volkova, O.S.; Vasiliev, A.N.; Tyablikov, O.A.; Hadermann, J.; Abakumov, A.M.
	Title	Crystal Structure, Defects, Magnetic and Dielectric Properties of the Layered Bi3n+1Ti7Fe3n-3,O9n+11 Perovskite-Anatase lntergrowths			Type	A1 Journal article
	Year	2017	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	56	Issue	56	Pages	931-942
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The Bi3n+1Ti7Fe3n-3,O9n+11 materials are built of (001)(p) plane parallel perovskite blocks with a thickness of n (Ti,Fe)O-6 octahedra, separated by periodic translational interfaces. The interfaces are based on anatase-like chains of edge -sharing (Ti,Fe)O-6 octahedra. Together with the octahedra of the perovskite blocks, they create S-shaped tunnels stabilized by lone pair Bi3+ cations. In this work, the structure of the n = 4-6 Bi3n+1Ti7Fe3n-3,O9n+11 homologues is analyzed in detail using advanced transmission electron microscopy, powder X-ray diffraction, and Mossbauer spectroscopy. The connectivity of the anatase-like chains to the perovskite blocks results in,a 3ap periodicity along the interfaces, so that they can be located either on top of each other or with shifts of +/- a(p) along [100](p). The ordered arrangement of the interfaces gives rise to orthorhombic Immm and monoclinic A2/m polymorphs with the unit cell parameters a = 3a(p), b = b(p), c = 2(n + 1)c(p) and a = 3a(p), b = b(p), c = 2(n + 1)c(p) – a(p), respectively. While the n = 3 compound is orthorhombic, the monoclinic modification is more favorable in higher homologues. The Bi3n+1Ti7Fe3n-3,O9n+11 structures demonstrate intricate patterns of atomic displacements in the perovskite blocks, which are supported by the stereochemical activity of the Bi3+ cations. These patterns are coupled to the cationic coordination of the oxygen atoms in the (Ti,Fe)O-2 layers at the border of the perovskite blocks. The coupling is strong in the 1/ = 3, 4 homologues, but gradually reduces with the increasing thickness of the perovskite blocks, so that, in the n = 6 compound, the dominant mode of atomic displacements is aligned along the interface planes. The displacements in the adjacent perovskite blocks tend to order antiparallel, resulting in an overall antipolar structure. The Bi3n+1Ti7Fe3n-3,O9n+11 materials demonstrate an unusual diversity of structure defects. The n = 4-6 homologues are robust antiferromagnets below T-N = 135, 220, and 295 K, respectively. They show a high dielectric constant that weakly increases with temperature and is relatively insensitive to the Ti/Fe ratio.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000392262400029	Publication Date	2016-12-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	3	Open Access	Not_Open_Access
	Notes	; The work was supported by the Russian Science Foundation (grant 14-13-00680). ;			Approved	Most recent IF: 4.857
	Call Number	UA @ lucian @ c:irua:141471			Serial	4495
Permanent link to this record



	Author	Malkov, I., V; Krivetskii, V.V.; Potemkin, D., I; Zadesenets, A., V; Batuk, M.M.; Hadermann, J.; Marikutsa, A., V; Rumyantseva, M.N.; Gas'kov, A.M.
	Title	Effect of Bimetallic Pd/Pt Clusters on the Sensing Properties of Nanocrystalline SnO2 in the Detection of CO			Type	A1 Journal article
	Year	2018	Publication	Russian journal of inorganic chemistry	Abbreviated Journal	Russ J Inorg Chem+
	Volume	63	Issue	8	Pages	1007-1011
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Nanocrystalline tin dioxide modified by Pd and Pt clusters or by bimetallic PdPt nanoparticles was synthesized. Distribution of the modifers on the SnO2 surface was studied by high-resolution transmission electron microscopy and energy dispersive X-ray microanalysis with element distribution mapping. It was shown that the Pd/Pt ratio in bimetallic particles varies over a broad range and does not depend on the particle diameter. The effect of platinum metals on the reducibility of nanocrystalline SnO2 by hydrogen was determined. The sensing properties of the resulting materials towards 6.7 ppm CO in air were estimated in situ by electrical conductivity measurements. The sensor response of SnO2 modified with bimetallic PdPt particles was a superposition of the signals of samples with Pt and Pd clusters.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000442749500003	Publication Date	2018-08-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0036-0236	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	0.787	Times cited	3	Open Access	Not_Open_Access
	Notes	; This work was supported by the ERA.Net RUS Plus program (project 096 FONSENS, RFBR grant 16-53-76001). ;			Approved	Most recent IF: 0.787
	Call Number	UA @ lucian @ c:irua:153752			Serial	5092
Permanent link to this record



	Author	Retuerto, M.; Yin, Z.; Emge, T.J.; Stephens, P.W.; Li, M.R.; Sarkar, T.; Croft, M.C.; Ignatov, A.; Yuan, Z.; Zhang, S.J.; Jin, C.; Paria Sena, R.; Hadermann, J.; Kotliar, G.; Greenblatt, M.;
	Title	Hole doping and structural transformation in CsTl_1-xHg_xCl₃			Type	A1 Journal article
	Year	2015	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	54	Issue	54	Pages	1066-1075
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	CsTlCl3 and CsTlF3 perovskites have been theoretically predicted to be superconductors when properly hole-doped. Both compounds have been previously prepared as pure compounds: CsTlCl3 in a tetragonal (I4/m) and a cubic (Fm3̅m) perovskite polymorph and CsTlF3 as a cubic perovskite (Fm3̅m). In this work, substitution of Tl in CsTlCl3 with Hg is reported, in an attempt to hole-dope the system and induce superconductivity. The whole series CsTl1xHgxCl3 (x = 0.0, 0.1, 0.2, 0.4, 0.6, and 0.8) was prepared. CsTl0.9Hg0.1Cl3 is tetragonal as the more stable phase of CsTlCl3. However, CsTl0.8Hg0.2Cl3 is already cubic with the space group Fm3̅m and with two different positions for Tl+ and Tl3+. For x = 0.4 and 0.5, solid solutions could not be formed. For x ≥ 0.6, the samples are primitive cubic perovskites with one crystallographic position for Tl+, Tl3+, and Hg2+. All of the samples formed are insulating, and there is no signature of superconductivity. X-ray absorption spectroscopy indicates that all of the samples have a mixed-valence state of Tl+ and Tl3+. Raman spectroscopy shows the presence of the active TlClTl stretching mode over the whole series and the intensity of the TlClHg mode increases with increasing Hg content. First-principle calculations confirmed that the phases are insulators in their ground state and that Hg is not a good dopant in the search for superconductivity in this system.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000348887400048	Publication Date	2014-12-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	5	Open Access
	Notes				Approved	Most recent IF: 4.857; 2015 IF: 4.762
	Call Number	c:irua:124420			Serial	1476
Permanent link to this record



	Author	Chernov, S.V.; Dobrovolsky, Y.A.; Istomin, S.Y.; Antipov, E.V.; Grins, J.; Svensson, G.; Tarakina, N.V.; Abakumov, A.M.; Van Tendeloo, G.; Eriksson, S.G.; Rahman, S.M.H.;
	Title	_Sr{2}GaScO₅, Sr₁₀Ga₆Sc₄O₂₅, and SrGa_0.75Sc_0.25O_2.5 : a play in the octahedra to tetrahedra ratio in oxygen-deficient perovskites			Type	A1 Journal article
	Year	2012	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	51	Issue	2	Pages	1094-1103
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Three different perovskite-related phases were isolated in the SrGa(1-x)Sc(x)O(2.5) system: Sr(2)GaScO(5), Sr(10)Ga(6)Sc(4)O(25), and SrGa(0.75)Sc(0.25)O(2.5), Sr(2)GaScO(5) (x = 0.5) crystallizes in a brownrnillerite-type structure [space group (S.G.) Icmm, a = 5.91048(5) angstrom, b = 15.1594(1) angstrom, and c = 5.70926(4) angstrom] with complete ordering of Sc(3+) and Ga(3+) over octahedral and tetrahedral positions, respectively. The crystal structure of Sr(10)Ga(6)Sc(4)O(25) (x = 0.4) was determined by the Monte Carlo method and refined using a combination of X-ray, neutron, and electron diffraction data [S.G. I4(1)/a, a = 17.517(1) angstrom, c = 32.830(3) angstrom]. It represents a novel type of ordering of the B cations and oxygen vacancies in perovskites. The crystal structure of Sr(10)Ga(6)Sc(4)O(25) can be described as a stacking of eight perovskite layers along the c axis ...[-(Sc/Ga)O(1.6)-SrO(0.8)-(Sc/Ga)O(1.8)-SrO(0.8)-](2 center dot center dot center dot) Similar to Sr(2)GaScO(5), this structure features a complete ordering of the Sc(3+) and Ga(3+) cations over octahedral and tetrahedral positions, respectively, within each layer. A specific feature of the crystal structure of Sr(10)Ga(6)Sc(4)O(25) is that one-third of the tetrahedra have one vertex not connected with other Sc/Ga cations. Further partial replacement of Sc(3+) by Ga(3+) leads to the formation of the cubic perovskite phase SrGa(0.75)Sc(0.25)O(2.5) (x = 0.25) with a = 3.9817(4) angstrom. This compound incorporates water molecules in the structure forming SrGa(0.75)Sc(0.25)O(2.5)center dot xH(2)O hydrate, which exhibits a proton conductivity of similar to 2.0 x 10(-6) S/cm at 673 K.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000299028800042	Publication Date	2011-12-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	14	Open Access
	Notes				Approved	Most recent IF: 4.857; 2012 IF: 4.593
	Call Number	UA @ lucian @ c:irua:96229			Serial	3559
Permanent link to this record



	Author	Weill; Chevalier; Chambon; Tressaud; Darriet; Etourneau; Van Tendeloo, G.
	Title	Electron-microscopy investigation of superconducting la2cu(o, f)4+y oxyfluoride			Type	A1 Journal article
	Year	1993	Publication	European journal of solid state and inorganic chemistry	Abbreviated Journal
	Volume	30	Issue	11	Pages	1095-1108
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The fluorination of La2CuO4 can lead to different oxyfluoride compounds depending on the TF2 temperature of the fluorine gas treatment. When 150-degrees-C T(F2) less-than-or-equal-to 200-degrees-c less-than-or-equal-to 200-degrees-C a superconducting material is obtained. Previous neutron diffraction experiments as well as the EXAFS measurements at the La L(III) edge indicate that extra anions lie in an interstitial site between the two (LaO) layers. Electron diffraction patterns clearly show the existence of an incommensurate modulation due to the presence of shear planes. A second phase is also pointed out which can be obtained as a major component when the fluorination temperature is raised to 230-degrees-C. This phase which is not a superconductor crystallizes with the monoclinic symmetry.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Paris	Editor
	Language		Wos	A1993MX13500006	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0992-4361	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	2	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:95476			Serial	954
Permanent link to this record



	Author	Weill, F.; Chevalier, B.; Chambon, M.; Tressaud, A.; Darriet, B.; Etourneau, J.; Van Tendeloo, G.
	Title	Electron microscopy investigation of superconducting La₂Cu(O,F)_4+y oxyfluoride			Type	A1 Journal article
	Year	1993	Publication	European journal of solid state and inorganic chemistry	Abbreviated Journal
	Volume	30	Issue		Pages	1095-1108
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Paris	Editor
	Language		Wos	A1993MX13500006	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0992-4361	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	2	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:7505			Serial	955
Permanent link to this record



	Author	Luo, Y.; He, Y.; Ding, Y.; Zuo, L.; Zhong, C.; Ma, Y.; Sun, M.
	Title	Defective biphenylene as high-efficiency hydrogen evolution catalysts			Type	A1 Journal article
	Year	2023	Publication	Inorganic chemistry	Abbreviated Journal
	Volume	63	Issue	2	Pages	1136-1141
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Electrocatalysts play a pivotal role in advancing the application of water splitting for hydrogen production. This research unveils the potential of defective biphenylenes as high-efficiency catalysts for the hydrogen evolution reaction. Using first-principles simulations, we systematically investigated the structure, stability, and catalytic performance of defective biphenylenes. Our findings unveil that defect engineering significantly enhances the electrocatalytic activity for hydrogen evolution. Specifically, biphenylene with a double-vacancy defect exhibits an outstanding Gibbs free energy of -0.08 eV, surpassing that of Pt, accompanied by a remarkable exchange current density of -3.08 A cm(-2), also surpassing that of Pt. Furthermore, we find the preference for the Volmer-Heyrovsky mechanism in the hydrogen evolution reaction, with a low energy barrier of 0.80 eV. This research provides a promising avenue for developing novel metal-free electrocatalysts for water splitting with earth-abundant carbon elements, making a significant step toward sustainable hydrogen production.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	001143581300001	Publication Date	2023-12-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	4.6	Times cited		Open Access
	Notes				Approved	Most recent IF: 4.6; 2023 IF: 4.857
	Call Number	UA @ admin @ c:irua:202780			Serial	9018
Permanent link to this record



	Author	Batuk, D.; Tsirlin, A.A.; Filimonov, D.S.; Zakharov, K.V.; Volkova, O.S.; Vasiliev, A.; Hadermann, J.; Abakumov, A.M.
	Title	Bi(3n+1)Ti7Fe(3n-3)O(9n+11) Homologous Series: Slicing Perovskite Structure with Planar Interfaces Containing Anatase-like Chains			Type	A1 Journal article
	Year	2016	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	55	Issue	55	Pages	1245-1257
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The n = 3-6 members of a new perovskite-based homologous series Bi(3n+1)Ti7Fe(3n-3)O(9n+11) are reported. The crystal structure of the n = 3 Bi10Ti7Fe6O38 member is refined using a combination of X-ray and neutron powder diffraction data (a = 11.8511(2) A, b = 3.85076(4) A, c = 33.0722(6) A, S.G. Immm), unveiling the partially ordered distribution of Ti(4+) and Fe(3+) cations and indicating the presence of static random displacements of the Bi and O atoms. All Bi(3n+1)Ti7Fe(3n-3)O(9n+11) structures are composed of perovskite blocks separated by translational interfaces parallel to the (001)p perovskite planes. The thickness of the perovskite blocks increases with n, while the atomic arrangement at the interfaces remains the same. The interfaces comprise chains of double edge-sharing (Fe,Ti)O6 octahedra connected to the octahedra of the perovskite blocks by sharing edges and corners. This configuration shifts the adjacent perovskite blocks relative to each other over a vector (1/2)[110]p and creates S-shaped tunnels along the [010] direction. The tunnels accommodate double columns of the Bi(3+) cations, which stabilize the interfaces owing to the stereochemical activity of their lone electron pairs. The Bi(3n+1)Ti7Fe(3n-3)O(9n+11) structures can be formally considered either as intergrowths of perovskite modules and polysynthetically twinned modules of the Bi2Ti4O11 structure or as intergrowths of the 2D perovskite and 1D anatase fragments. Transmission electron microscopy (TEM) on Bi10Ti7Fe6O38 reveals that static atomic displacements of Bi and O inside the perovskite blocks are not completely random; they are cooperative, yet only short-range ordered. According to TEM, the interfaces can be laterally shifted with respect to each other over +/-1/3a, introducing an additional degree of disorder. Bi10Ti7Fe6O38 is paramagnetic in the 1.5-1000 K temperature range due to dilution of the magnetic Fe(3+) cations with nonmagnetic Ti(4+). The n = 3, 4 compounds demonstrate a high dielectric constant of 70-165 at room temperature.
	Address	Center for Electrochemical Energy Storage, Skolkovo Institute of Science and Technology , Nobelya str. 3, 143026 Moscow, Russia
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language	English	Wos	000369356800031	Publication Date	2016-01-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	3	Open Access
	Notes	We are grateful to the Laboratory for Neutron Scattering and Imaging of Paul Scherrer Institut (LNS PSI, Villigen, Switzerland) for granting beam time at the HRPT diffrac- tometer and to Dr. Denis Sheptyakov for the technical support during the experiment. We are also grateful to Valery Verchenko for his help with magnetization measurements. The work has been supported by the Russian Science Foundation (grant 14-13-00680). A.A.T. was partly supported by the Federal Ministry for Education and Science through a Sofja Kovalevskaya Award of Alexander von Humboldt Foundation.			Approved	Most recent IF: 4.857
	Call Number	c:irua:132247			Serial	4073
Permanent link to this record



	Author	Panin, R.V.; Khasanova, N.R.; Bougerol, C.; Schnelle, W.; Van Tendeloo, G.; Antipov, E.V.
	Title	Ordering of Pd²⁺ and Pd⁴⁺ in the mixed-valent palladate KPd₂O₃			Type	A1 Journal article
	Year	2010	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	49	Issue	4	Pages	1295-1297
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A new potassium palladate KPd2O3 was synthesized by the reaction of KO2 and PdO at elevated oxygen pressure. Its crystal structure was solved from powder X-ray diffraction data in the space group Rm (a = 6.0730(1) Å, c = 18.7770(7) Å, and Z = 6). KPd2O3 represents a new structure type, consisting of an alternating sequence of K+ and Pd2O3− layers with ordered Pd2+ and Pd4+ ions. The presence of palladium ions in di- and tetravalent low-spin states was confirmed by magnetic susceptibility measurements.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000274240700009	Publication Date	2010-01-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	9	Open Access
	Notes	Iap Iv			Approved	Most recent IF: 4.857; 2010 IF: 4.326
	Call Number	UA @ lucian @ c:irua:80990			Serial	2507
Permanent link to this record



	Author	Nagy, N.V.; Van Doorslaer, S.; Szabó-Plánka, T.; Van Rompaey, S.; Hamza, A.; Fülöp, F.; Tóth, G.K.; Rockenbauer, A.
	Title	Copper(II)-binding ability of stereoisomeric cis- and trans-2-aminocyclohexanecarboxylic acidl-phenylalanine dipeptides : a combined CW/pulsed EPR and DFT study			Type	A1 Journal article
	Year	2012	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	51	Issue	3	Pages	1386-1399
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	With the aim of an improved understanding of the metal-complexation properties of alicyclic β-amino acid stereoisomers, and their peptides, the complex equilibria and modes of coordination with copper(II) of l-phenylalanine (F) derivatives of cis/trans-2-aminocyclohexanecarboxylic acid (c/tACHC), i.e. the dipeptides F-c/tACHC and c/tACHC-F, were investigated by a combination of CW and pulsed EPR methods. For the interpretation of the experimental data, DFT quantum-chemical calculations were carried out. Simulation of a pH-dependent series of room-temperature CW-EPR spectra revealed the presence of EPR-active complexes ([Cu(aqua)]2+, [CuL]+, [CuLH1], [CuLH2]−, and [CuL2H1]−), and an EPR-inactive species ([Cu2L2H3]−) in aqueous solutions for all studied cases. [CuLH]2+ was included in the equilibrium model for the c/tACHC-Fcopper(II) systems, and [CuL2], together with two coordination isomers of [CuL2H1]−, were also identified in the F-tACHCcopper(II) system. Comparison of the complexation properties of the diastereomeric ligand pair F-(1S,2R)-ACHC and F-(1R,2S)-ACHC did not reveal significant differences. Considerably lower formation constants were obtained for the trans than for the cis isomers for both the F-c/tACHC and the c/tACHC-F pairs in the case of [CuLH1] involving tridentate coordination by the amino, the deprotonated peptide, and the carboxylate groups. A detailed structural analysis by pulsed EPR methods and DFT calculations indicated that there was no significant destabilization for the complexes of the trans isomers. The lower stability of their complexes was explained by the limitation that only the conformer with donor groups in equatorialequatorial ring positions can bind to copper(II), whereas both equatorial-axial conformers of the cis isomers are capable of binding. From a consideration of the proton couplings obtained with X-band 1H HYSCORE, 2H exchange experiments, and DFT, the thermodynamically most stable cyclohexane ring conformer was assigned for all four [CuLH1] complexes. For the F-cACHC case, the conformer did not match the most stable conformer of the free ligand.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000300474700029	Publication Date	2012-01-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 4.857; 2012 IF: 4.593
	Call Number	UA @ lucian @ c:irua:96729			Serial	515
Permanent link to this record



	Author	Isaeva, A.A.; Makarevich, O.N.; Kutznetsov, A.N.; Doert, T.; Abakumov, A.M.; Van Tendeloo, G.
	Title	Mixed tellurides Ni_3-xGaTe₂ (0\leq x\leq0.65): crystal and electronic structures, properties, and nickel deficiency effects on vacancy ordering			Type	A1 Journal article
	Year	2010	Publication	European journal of inorganic chemistry	Abbreviated Journal	Eur J Inorg Chem
	Volume		Issue	9	Pages	1395-1404
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The Ni3-xGaTe2 series of compounds (0 x 0.65) was synthesized by a high-temperature ceramic technique at 750 °C. Crystal structures of three compounds in the series were determined by X-ray powder diffraction: Ni2.98(1)GaTe2 (RI = 0.042, Rp = 0.023, Rwp = 0.035), Ni2.79(1)GaTe2 (RI = 0.053, Rp = 0.028, Rwp = 0.039), Ni2.58(1)GaTe2 (RI = 0.081, Rp = 0.037, Rwp = 0.056); the structures were verified by electron diffraction and, for the former compound, high-resolution electron microscopy. The compounds crystallize in a hexagonal lattice with P63/mmc, and the structures can be regarded as a hexagonal close-packed array with a -Ga-Te-Te- stacking sequence. The octahedral and trigonal bipyramidal voids in the hcp structure are selectively filled with Ni atoms to form one entirely occupied and two partially occupied sites, thus allowing variations in the nickel content in the series of compounds Ni3-xGaTe2 (0 x 0.65). A superstructure with asup = 2asub (P63/mmc) has been identified for Ni3-xGaTe2 (0.5 x 0.65) by electron diffraction. Real-space, high-resolution images confirm an ordering of Ni atoms and vacancies inthe ab plane. Quantum-chemical calculations performed forNi3-xGaTe2 (x = 0, 0.25, 0.75, 1) suggest anisotropic metallic conductivity and Pauli paramagnetic behavior that are experimentally confirmed for Ni3GaTe2.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000276370300009	Publication Date	2010-02-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1434-1948;1099-0682;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.444	Times cited	8	Open Access
	Notes				Approved	Most recent IF: 2.444; 2010 IF: 2.910
	Call Number	UA @ lucian @ c:irua:82266			Serial	2090
Permanent link to this record



	Author	Avila-Brande, D.; Otero-Díaz, L.C.; Landa-Cánovas, A.R.; Bals, S.; Van Tendeloo, G.
	Title	A new Bi₄Mn_1/3W_2/3O₈Cl Sillén-Aurivillius intergrowth: synthesis and structural characterisation by quantitative transmission electron microscopy			Type	A1 Journal article
	Year	2006	Publication	European journal of inorganic chemistry	Abbreviated Journal	Eur J Inorg Chem
	Volume		Issue	9	Pages	1853-1858
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The synthesis and structural characterisation of a new phase with nominal composition Bi4Mn1/3W2/3O8Cl is presented. Conventional and analytical transmission electron microscopy are used to determine the composition, unit-cell symmetry and space group of the compound, whereas a structural model is deducted by exit-wave reconstruction in the transmission electron microscope. This technique allows the microscope information limit of 1.1 angstrom to be reached and the (light) oxygen atoms in the presence of heavier atoms (Bi, W, Mn) to be imaged. The average structure is refined from Xray powder diffraction data using the Rietveld method yielding an orthorhombic unit cell with lattice parameters a 5.467(4) angstrom, b = 5.466(7) angstrom and c = 14.159(3) angstrom and space group Cm2m, which could be described as a Sillen-Aurivillius intergrowth. ((c) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2006)
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000237617800016	Publication Date	2006-03-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1434-1948;1099-0682;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.444	Times cited	12	Open Access
	Notes				Approved	Most recent IF: 2.444; 2006 IF: 2.704
	Call Number	UA @ lucian @ c:irua:59436			Serial	2335
Permanent link to this record



	Author	Müller, M.; Turner, S.; Lebedev, O.I.; Wang, Y.; Van Tendeloo, G.; Fischer, R.A.
	Title	Au@MOF-5 and Au/Mo_x@MOF-5 (M = Zn, Ti; x = 1, 2) : preparation and microstructural characterisation			Type	A1 Journal article
	Year	2011	Publication	European journal of inorganic chemistry	Abbreviated Journal	Eur J Inorg Chem
	Volume		Issue	12	Pages	1876-1887
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The Zn-carboxylate-based porous coordination polymer MOF-5 [Zn4O(bdc)3] and the metal oxide loaded materials ZnO@MOF-5 and TiO2@MOF-5 were loaded in a second step with the precursor [ClAuCO] to yield intermediate materials denoted as [ClAuCO]@MOF-5, [ClAuCO]/ZnO@MOF-5 and [ClAuCO]/TiO2@MOF-5. These composites were decomposed to Au@MOF-5, Au/ZnO@MOF-5 and Au/TiO2@MOF-5 under hydrogen at 100 °C. The nanoparticle-loaded hybrid materials were characterised by powder X-ray diffraction (PXRD), IR spectroscopy, X-ray photoelectron spectroscopy (XPS) and N2 sorption measurements, which reveal an intact MOF-5 structure that maintains a high specific surface area. For Au@MOF-5, crystalline Au nanoparticles were distributed over the MOF matrix in a homogeneous fashion with a size of ca. 13 nm, evidenced by high resolution transmission electron microscopy. In the case of Au/ZnO@MOF-5, the Au and metal oxide particles of a few nm in size were coexistent in a given volume of the MOF-5 matrix and were not separated in different crystalline MOF particles. For the TiO2 loaded materials the oxide is preferentially located near the outer surface of the MOF particles, leading to an increase of larger exterior Au particles in comparison to very small interior Au particles as observed for the other materials. Au@MOF-5, Au/ZnO@MOF-5 and Au/TiO2@MOF-5 were tested in liquid-phase oxidation of alcohols. Preliminary results show a high activity for the Au loaded materials in this reaction. This observation is attributed to the microstructure of the composites with very small Au particles distributed homogeneously over the MOF matrix.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000289644300004	Publication Date	2011-03-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1434-1948;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.444	Times cited	75	Open Access
	Notes	Fwo; Esteem 026019			Approved	Most recent IF: 2.444; 2011 IF: 3.049
	Call Number	UA @ lucian @ c:irua:88644			Serial	205
Permanent link to this record



	Author	Lander, L.; Rousse, G.; Batuk, D.; Colin, C.V.; Dalla Corte, D.A.; Tarascon, J.-M.
	Title	Synthesis, structure, and electrochemical properties of k-based sulfates K₂M₂(SO₄)₃) with M = Fe and Cu			Type	A1 Journal article
	Year	2017	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	56	Issue	4	Pages	2013-2021
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Stabilizing new host structures through potassium extraction from K-based polyanionic materials has been proven to be an interesting approach to develop new Li+/Na+ insertion materials. Pursuing the same trend, we here report the feasibility of preparing langbeinite “Fe-2(SO4)(3)” via electrochemical and chemical oxidation of K2Fe2(SO4)(3). Additionally, we succeeded in stabilizing a new K2Cu2(SO4)(3) phase via a solid-state synthesis approach. This novel compound crystallizes in a complex orthorhombic structure that differs from that of langbeinite as deduced from synchrotron X-ray and neutron powder diffraction. Electrochemically, the performance of this new phase is limited, which we explain in terms of sluggish diffusion kinetics. We further show that K2Cu2(SO4)(3) decomposes into K2Cu3O(SO4)(3) on heating, and we report for the first time the synthesis of fedotovite K2Cu3O(SO4)(3). Finally, the fundamental attractiveness of these S = 1/2 systems for physicists is examined by neutron magnetic diffraction, which reveals the absence of a long-range ordering of Cu2+ magnetic moments down to 1.5 K.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000394736600027	Publication Date	2017-01-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	13	Open Access	Not_Open_Access
	Notes	; We thank Matthieu Courty for performing TGA/DSC measurements. Use of the 11-BM mail service of the APS at Argonne National Laboratory was supported by the U.S. Department of Energy under Contract DE-AC02-06CH11357 and is acknowledged. The French CRG D1B is acknowledged for allocating neutron beamtime. L.L. thanks the ANR “Hipolite” for the Ph.D. funding. ;			Approved	Most recent IF: 4.857
	Call Number	UA @ lucian @ c:irua:142531			Serial	4692
Permanent link to this record



	Author	Batuk, M.; Turner, S.; Abakumov, A.M.; Batuk, D.; Hadermann, J.; Van Tendeloo, G.
	Title	Atomic structure of defects in anion-deficient perovskite-based ferrites with a crystallographic shear structure			Type	A1 Journal article
	Year	2014	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	53	Issue	4	Pages	2171-2180
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Crystallographic shear (CS) planes provide a new structure-generation mechanism in the anion-deficient perovskites containing lone-pair cations. Pb2Sr2Bi2Fe6O16, a new n = 6 representative of the AnBnO3n2 homologous series of the perovskite-based ferrites with the CS structure, has been synthesized using the solid-state technique. The structure is built of perovskite blocks with a thickness of four FeO6 octahedra spaced by double columns of FeO5 edge-sharing distorted tetragonal pyramids, forming 1/2[110](101)p CS planes (space group Pnma, a = 5.6690(2) Å, b = 3.9108(1) Å, c = 32.643(1) Å). Pb2Sr2Bi2Fe6O16 features a wealth of microstructural phenomena caused by the flexibility of the CS planes due to the variable ratio and length of the constituting fragments with {101}p and {001}p orientation. This leads to the formation of waves, hairpins, Γ-shaped defects, and inclusions of the hitherto unknown layered anion-deficient perovskites Bi2(Sr,Pb)Fe3O8.5 and Bi3(Sr,Pb)Fe4O11.5. Using a combination of diffraction, imaging, and spectroscopic transmission electron microscopy techniques this complex microstructure was fully characterized, including direct determination of positions, chemical composition, and coordination number of individual atomic species. The complex defect structure makes these perovskites particularly similar to the CS structures in ReO3-type oxides. The flexibility of the CS planes appears to be a specific feature of the Sr-based system, related to the geometric match between the SrO perovskite layers and the {100}p segments of the CS planes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000332144100039	Publication Date	2014-01-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	6	Open Access
	Notes	Countatoms; FWO			Approved	Most recent IF: 4.857; 2014 IF: 4.762
	Call Number	UA @ lucian @ c:irua:113507			Serial	198
Permanent link to this record



	Author	Batuk, M.; Batuk, D.; Tsirlin, A.A.; Rozova, M.G.; Antipov, E.V.; Hadermann, J.; Van Tendeloo, G.
	Title	Homologous series of layered perovskites A_n+1B_nO_3n-1Cl : crystal and magnetic structure of a new oxychloride Pb₄BiFe₄O₁₁Cl			Type	A1 Journal article
	Year	2013	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	52	Issue	4	Pages	2208-2218
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The nuclear and magnetic structure of a novel oxychloride Pb4BiFe4O11Cl has been studied over the temperature range 1.5700 K using a combination of transmission electron microscopy and synchrotron and neutron powder diffraction [space group P4/mbm, a = 5.5311(1) Å, c = 19.586(1) Å, T = 300 K]. Pb4BiFe4O11Cl is built of truncated (Pb,Bi)3Fe4O11 quadruple perovskite blocks separated by CsCl-type (Pb,Bi)2Cl slabs. The perovskite blocks consist of two layers of FeO6 octahedra located between two layers of FeO5 tetragonal pyramids. The FeO6 octahedra rotate about the c axis, resulting in a √2ap × √2ap × c superstructure. Below TN = 595(17) K, Pb4BiFe4O11Cl adopts a G-type antiferromagnetic structure with the iron magnetic moments confined to the ab plane. The ordered magnetic moments at 1.5 K are 3.93(3) and 3.62(4) μB on the octahedral and square-pyramidal iron sites, respectively. Pb4BiFe4O11Cl can be considered a member of the perovskite-based An+1BnO3n1Cl homologous series (A = Pb/Bi; B = Fe) with n = 4. The formation of a subsequent member of the series with n = 5 is also demonstrated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000315255200067	Publication Date	2013-02-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	6	Open Access
	Notes	Countatoms			Approved	Most recent IF: 4.857; 2013 IF: 4.794
	Call Number	UA @ lucian @ c:irua:106185			Serial	1486
Permanent link to this record



	Author	Abeysinghe, D.; Smith, M.D.; Yeon, J.; Tran, T.T.; Sena, R.P.; Hadermann, J.; Halasyamani, P.S.; zur Loye, H.-C.
	Title	Crystal growth and structure analysis of Ce-18-W-10-O-57 : a complex oxide containing tungsten in an unusual trigonal prismatic coordination environment			Type	A1 Journal article
	Year	2017	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	56	Issue	5	Pages	2566-2575
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The noncentrosymmetric tungstate oxide, Ce18W10O57) was synthesized for the first time as high-quality single crystals via the molten chloride flux method and structurally characterized by single-crystal X-ray diffraction. The compound is a structural analogue to the previously reported La18W10O57, which crystallizes in the hexagonal space group P (6) over bar 2c. The +3 oxidation state of cerium in Ce18W10O57 was achieved via the in situ reduction of Ce(IV) to Ce(III) using Zn metal. The structure consists of both isolated and face-shared WO6 octahedra and, surprisingly, isolated WO6 trigonal prisms. A careful analysis of the packing arrangement in the structure makes it possible to explain the unusual structural architecture of Ce18W10O57, which is described in detail. The temperature-dependent magnetic susceptibility of Ce18W10O57 indicates that the cerium(III) f(1) cations do not order magnetically and exhibit simple paramagnetic behavior. The SHG efficiency of Ln(18)W(10)O(57) (Ln = La, Ce) was measured as a function of particle size, and both compounds were found to be SHG active with efficiency approximately equal to that of alpha-SiO2.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000395847300026	Publication Date	2017-02-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	9	Open Access	Not_Open_Access
	Notes	; Financial support for this work was provided by the National Science Foundation under DMR-1301757 and is gratefully acknowledged. T.T.T. and P.S.H. thank the Welch Foundation (Grant E-1457) and NSF-DMR-1503573. ;			Approved	Most recent IF: 4.857
	Call Number	UA @ lucian @ c:irua:142449			Serial	4643
Permanent link to this record



	Author	Ramezanipour, F.; Greedan, J.E.; Siewenie, J.; Donaberger, R.L.; Turner, S.; Botton, G.A.
	Title	A vacancy-disordered, oxygen-deficient perovskite with long-range magnetic ordering : local and average structures and magnetic properties of Sr₂Fe_1.5Cr_0.5O₅			Type	A1 Journal article
	Year	2012	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	51	Issue	4	Pages	2638-2644
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The local and average crystal structures and magnetic properties of the oxygen-deficient perovskite Sr2Fe1.5Cr0.5O5+y were studied using powder X-ray and neutron diffraction, neutron-pair distribution function analysis, and electron energy-loss spectroscopy. This material crystallizes in the cubic Pm3̅m space group, with a = 3.94491(14) Å. The oxygen vacancies are distributed randomly throughout the perovskite-type structure, and the average coordination number of the Fe(Cr) sites is 5. Refinement of the neutron diffraction data indicates y 0.05. This is in discordance with an earlier report on a material with the same nominal composition and cell constant. Electron energy-loss Cr L2,3-edge spectroscopy shows that Cr3+ is present, which is also contrary to previous speculation. Neutron-pair distribution function studies show that a brownmillerite-like model involving ordered vacancies and alternating octahedral and tetrahedral coordination at the metal sites, gives a better description of the local structure out to 5 Å. A remarkable phenomenon determined by neutron diffraction in Sr2Fe1.5Cr0.5O5 is the occurrence of a long-range G-type antiferromagnetic ordering with Tc ≈ 565 K because cubic oxygen-deficient perovskites with B-site disorder usually do not undergo transitions to magnetically ordered states. The observation of long-range antiferromagnetic order and the Tc value are in accordance with previous Mössbauer spectroscopic studies.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000300466300079	Publication Date	2012-01-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	12	Open Access
	Notes	Fwo			Approved	Most recent IF: 4.857; 2012 IF: 4.593
	Call Number	UA @ lucian @ c:irua:95039			Serial	3828
Permanent link to this record



	Author	Tunca, B.; Lapauw, T.; Karakulina, O.M.; Batuk, M.; Cabioc’h, T.; Hadermann, J.; Delville, R.; Lambrinou, K.; Vleugels, J.
	Title	Synthesis of MAX Phases in the Zr-Ti-Al-C System			Type	A1 Journal article
	Year	2017	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	56	Issue	56	Pages	3489-3498
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	This study reports on the synthesis and characterization of MAX phases in the (Zr,Ti)n+1AlCn system. The MAX phases were synthesized by reactive hot pressing and pressureless sintering in the 1350–1700 °C temperature range. The produced ceramics contained large fractions of 211 and 312 (n = 1, 2) MAX phases, while strong evidence of a 413 (n = 3) stacking was found. Moreover, (Zr,Ti)C, ZrAl2, ZrAl3, and Zr2Al3 were present as secondary phases. In general, the lattice parameters of the hexagonal 211 and 312 phases followed Vegard’s law over the complete Zr-Ti solid solution range, but the 312 phase showed a non-negligible deviation from Vegard’s law around the (Zr0.33,Ti0.67)3Al1.2C1.6 stoichiometry. High-resolution scanning transmission electron microscopy combined with X-ray diffraction demonstrated ordering of the Zr and Ti atoms in the 312 phase, whereby Zr atoms occupied preferentially the central position in the close-packed M6X octahedral layers. The same ordering was also observed in 413 stackings present within the 312 phase. The decomposition of the secondary (Zr,Ti)C phase was attributed to the miscibility gap in the ZrC-TiC system.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000397171100045	Publication Date	2017-03-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	26	Open Access	OpenAccess
	Notes	Fonds Wetenschappelijk Onderzoek, G.0431.10N.F ; Agentschap voor Innovatie door Wetenschap en Technologie, 131081 ; European Atomic Energy Community, 604862 ; SCK-CEN Academy for Nuclear Science and Technology; Hercules Foundation, Project/Award no: AKUL/1319 Project/Award no: ZW09-09 ;			Approved	Most recent IF: 4.857
	Call Number	EMAT @ emat @ c:irua:141794			Serial	4491
Permanent link to this record



	Author	Berdonosov, P.S.; Akselrud, L.; Prots, Y.; Abakumov, A.M.; Smet, P.F.; Poelman, D.; Van Tendeloo, G.; Dolgikh, V.A.
	Title	Cs₇Nd₁₁(SeO₃)₁₂Cl₁₆ : first noncentrosymmetric structure among alkaline-metal lanthanide selenite halides			Type	A1 Journal article
	Year	2013	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	52	Issue	7	Pages	3611-3619
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Cs7Nd11(SeO3)(12)Cl-16, the complex selenite chloride of cesium and neodymium, was synthesized in the NdOCl-SeO2-CsCl system. The compound has been characterized using single-crystal X-ray diffraction, electron diffraction, transmission electron microscopy, luminescence spectroscopy, and second-harmonic-generation techniques. Cs7Nd11(SeO3)(12)Cl-16 crystallizes in an orthorhombic unit cell with a = 15.911(1) angstrom, b = 15.951(1) angstrom, and c = 25.860(1) angstrom and a noncentrosymmetric space group Pna2(1) (No. 33). The crystal structure of Cs7Nd11(SeO3)(12)Cl-16 can be represented as a stacking of Cs7Nd11(SeO3)(12) lamellas and CsCl-like layers. Because of the layered nature of the Cs7Nd11(SeO3)(12)Cl-16 structure, it features numerous planar defects originating from occasionally missing the CsCl-like layer and violating the perfect stacking of the Cs7Nd11(SeO3)(12)Cl-16 lamellas. Cs7Nd11(SeO3)(12)Cl-16 represents the first example of a noncentrosymmetric structure among alkaline-metal lanthanide selenite halides. Cs7Nd11(SeO3)(12)Cl-16 demonstrates luminescence emission in the near-IR region with reduced efficiency due to a high concentration of Nd3+ ions causing nonradiative cross-relaxation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000317094300022	Publication Date	2013-03-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	10	Open Access
	Notes				Approved	Most recent IF: 4.857; 2013 IF: 4.794
	Call Number	UA @ lucian @ c:irua:108482			Serial	3524
Permanent link to this record



	Author	Meilikhov, M.; Yusenko, K.; Esken, D.; Turner, S.; Van Tendeloo, G.; Fischer, R.A.
	Title	Metals@MOFs – loading MOFs with metal nanoparticles for hybrid functions			Type	A1 Journal article
	Year	2010	Publication	European journal of inorganic chemistry	Abbreviated Journal	Eur J Inorg Chem
	Volume	2010	Issue	24	Pages	3701-3714
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Metalorganic frameworks (MOFs) as well as porous coordination polymers (PCPs) are porous, organicinorganic hybrid solids with zeolite-like structures and properties. Due to their extraordinarily high surface area and well defined pore structure MOFs can be used for the stabilization of metal nanoparticles with adjustable size. The embedded metal nanoparticles are still accessible for other reagents due to the high porosity of the MOF systems. This fact makes metal@MOF systems especially interesting for heterogeneous catalysis, gas storage and chemical sensing. This review compiles the cases of metal nanoparticles supported by or embedded into MOFs reported so far and the main aspects and problems associated with these novel nanocomposite systems. The determination of the dispersion and the location of the particles at the MOF support, the control of the loading degree and its effect on the catalytic activity of the system are discussed as well as the partial degradation of the MOF structure upon particle formation. Examples of the introduction of stabilizing groups into the MOF network that direct the loading and can influence the size and shape of the embedded particles are still rare and point into the possible direction of future investigations. Finally, the formation of bimetallic nanoparticles, which are stabilized and supported by a MOF network, will also be reviewed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000281684300001	Publication Date	2010-07-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1434-1948;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.444	Times cited	366	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 2.444; 2010 IF: 2.910
	Call Number	UA @ lucian @ c:irua:85495			Serial	2014
Permanent link to this record



	Author	Cassidy, S.J.; Pitcher, M.J.; Lim, J.J.K.; Hadermann, J.; Allen, J.P.; Watson, G.W.; Britto, S.; Chong, E.J.; Free, D.G.; Grey, C.P.; Clarke, S.J.
	Title	Layered CeSO and LiCeSO oxide chalcogenides obtained via topotactic oxidative and reductive transformations			Type	A1 Journal article
	Year	2019	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	58	Issue	6	Pages	3838-3850
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The chemical accessibility of the Celv oxidation state enables redox chemistry to be performed on the naturally coinagemetal -deficient phases CeM1-xSO (M = Cu, Ag). A metastable black compound with the PbFC1 structure type (space group P4/nmm: a = 3.8396(1) angstrom, c = 6.607(4) angstrom, V = 97.40(6) angstrom(3)) and a composition approaching CeSO is obtained by deintercalation of Ag from CeAg0.8SO. High-resolution transmission electron microscopy reveals the presence of large defect-free regions in CeSO, but stacking faults are also evident which can be incorporated into a quantitative model to account for the severe peak anisotropy evident in all the highresolution X-ray and neutron diffractograms of bulk CeSO samples; these suggest that a few percent of residual Ag remains. A strawcolored compound with the filled PbFCI (i.e., ZrSiCuAs- or HfCuSi2type) structure (space group P4/nmm: a = 3.98171(1) angstrom, c = 8.70913(5) angstrom, V = 138.075(1) angstrom 3) and a composition close to LiCeSO, but with small amounts of residual Ag, is obtained by direct reductive lithiation of CeAga8S0 or by insertion of Li into CeSO using chemical or electrochemical means. Computation of the band structure of pure, stoichiometric CeSO predicts it to be a Ce' compound with the 4f-states lying approximately 1 eV above the sulfide-dominated valence band maximum. Accordingly, the effective magnetic moment per Ce ion measured in the CeSO samples is much reduced from the value found for the Ce3+-containing LiCeSO, and the residual paramagnetism corresponds to the Ce3+ ions remaining due to the presence of residual Ag, which presumably reflects the difficulty of stabilizing Ce' in the presence of sulfide (S2-). Comparison of the behavior of CeCu0.8SO with that of CeCu0.8SO reveals much slower reaction kinetics associated with the Cu,_xS layers, and this enables intermediate CeCui LixSO phases to be isolated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000461978700036	Publication Date	2019-02-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited		Open Access	OpenAccess
	Notes	; We thank the UK EPSRC (EP/M020517/1 and EP/P018874/1), the Leverhulme Trust (RPG-2014-221), and Science Foundation Ireland (Grant 12/IA/1414) for funding and the EPSRC for additional studentship support. We acknowledge the ISIS pulsed neutron and muon source and the Diamond Light Source Ltd. (EE13284 and EE18786) and the ESRF for the award of beam time. We thank Dr. R I. Smith for assistance on the neutron beamlines, Dr. A. Baker and Dr. C. Murray for support on III, and Dr. C. Curls for support on ID31. ;			Approved	Most recent IF: 4.857
	Call Number	UA @ admin @ c:irua:159426			Serial	5253
Permanent link to this record



	Author	Vernimmen, J.; Meynen, V.; Herregods, S.J.F.; Mertens, M.; Lebedev, O.I.; Van Tendeloo, G.; Cool, P.
	Title	New insights in the formation of combined zeolitic/mesoporous materials by using a one-pot templating synthesis			Type	A1 Journal article
	Year	2011	Publication	European journal of inorganic chemistry	Abbreviated Journal	Eur J Inorg Chem
	Volume		Issue	27	Pages	4234-4240
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA)
	Abstract	Zeolitic growth is often absent or occurs in separate phases when synthetic strategies based on the combination of zeolite templates and mesopore templating agents are applied. In this work, zeolitic growth and mesopore formation have been investigated at different temperatures by applying a one-pot templating approach, based on a TS-1 zeolite synthesis whereby part of the microtemplate (tetrapropylammonium hydroxide, TPAOH) is replaced by a mesotemplate (hexadecyltrimethylammonium bromide, CTMABr). Moreover, the synthesis duration and the molar ratio of the microtemplate/mesotemplate have also been studied. The different syntheses clearly show the inherent competitive mechanism between zeolitic growth and mesopore formation. These insights have led to the conclusion that by following a one-pot templating strategy with standard, nonexotic commercial templates, i.e. CTMABr and TPAOH, it is not possible to develop a true hierarchical mesoporous zeolite, meaning a mesoporous siliceous material with highly crystalline zeolitic walls. The resultant materials are instead combined zeolitic/mesoporous composite structures with, however, highly tuneable and controllable porosity characteristics.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000296143500014	Publication Date	2011-08-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1434-1948;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.444	Times cited	7	Open Access
	Notes	Fwo			Approved	Most recent IF: 2.444; 2011 IF: 3.049
	Call Number	UA @ lucian @ c:irua:91574			Serial	2315
Permanent link to this record