NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	31–60 of 76 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 >>

List View

Citations

Details

	Records
	Author	Kozák, T.; Vlček, J.
	Title	A parametric model for reactive high-power impulse magnetron sputtering of films			Type	A1 Journal article
	Year	2016	Publication	Journal Of Physics D-Applied Physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	49	Issue	49	Pages	055202
	Keywords	A1 Journal article; Electron Microscopy for Materials Science (EMAT);
	Abstract	We present a time-dependent parametric model for reactive HiPIMS deposition of films. Specific features of HiPIMS discharges and a possible increase in the density of the reactive gas in front of the reactive gas inlets placed between the target and the substrate are considered in the model. The model makes it possible to calculate the compound fractions in two target layers and in one substrate layer, and the deposition rate of films at fixed partial pressures of the reactive and inert gas. A simplified relation for the deposition rate of films prepared using a reactive HiPIMS is presented. We used the model to simulate controlled reactive HiPIMS depositions of stoichiometric ZrO2 films, which were recently carried out in our laboratories with two different configurations of the O2 inlets in front of the sputtered target. The repetition frequency was 500 Hz at the deposition-averaged target power densities of 5 Wcm−2 and 50 Wcm−2 with a pulse-averaged target power density up to 2 kWcm−2. The pulse durations were 50 μs and 200 μs. Our model calculations show that the to-substrate O2 inlet provides systematically lower compound fractions in the target surface layer and higher compound fractions in the substrate surface layer, compared with the to-target O2 inlet. The low compound fractions in the target surface layer (being approximately 10% at the depositionaveraged target power density of 50 Wcm−2 and the pulse duration of 200 μs) result in high deposition rates of the films produced, which are in agreement with experimental values.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000368944100016	Publication Date	2015-12-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links
	Impact Factor	2.588	Times cited	25	Open Access
	Notes	This work was supported by the Czech Science Foundation under Project No. GA14–03875S			Approved	Most recent IF: 2.588
	Call Number	PLASMANT @ plasmant @			Serial	3994
Permanent link to this record



	Author	Kumar, N.; Attri, P.; Dewilde, S.; Bogaerts, A.
	Title	Inactivation of human pancreatic ductal adenocarcinoma with atmospheric plasma treated media and water: a comparative study			Type	A1 Journal article
	Year	2018	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	51	Issue	25	Pages	255401
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In recent years, the interest in treating cancer cells with plasma treated media (PTM) and plasma treated water (PTW) has increased tremendously. However, the actions of PTM and PTW are still not entirely understood. For instance, it is not clear whether the action of PTM is due to a modification in proteins/amino acids after plasma treatment of the media, or due to reactive oxygen and nitrogen species (RONS) generated from the plasma, or a combination of both effects. To differentiate between the actions of RONS and modified proteins/amino acids on the treatment of cancer cells, we compared the effects of PTM and PTW on two different pancreatic ductal adenocarcinomas (MiaPaca-2, BxPc3) and pancreatic stellate cells (PSCs) (hPSC128-SV). PSCs closely interact with cancer cells to create a tumor-promoting environment that stimulates local tumor progression and metastasis. We treated culture media and deionized water with a cold atmospheric plasma (CAP) jet, and subsequently applied this PTM/PTW at various ratios to the pancreatic cancer and PSC cell lines. We evaluated cell death, intracellular ROS concentrations and the mRNA expression profiles of four oxidative stress-related genes, i.e. Mitogen-activated protein kinase 7 (MAPK7), B-cell lymphoma 2 (BCL2), Checkpoint kinase 1 (CHEK1) and DNA damage-inducible transcript 3, also known as C/EBP homologous protein (CHOP). Our findings demonstrate that PTM and PTW have a similar efficacy to kill pancreatic cancer cells, while PTW is slightly more effective in killing PSCs, as compared to PTM. Furthermore, we observed an enhancement of the intracellular ROS concentrations in both pancreatic cancer cells and PSCs. Thus, it is likely that under our experimental conditions, the anti-cancer activity of PTM can be attributed more to the RONS present in the treated liquid, than to the modification of proteins/amino acids in the media. Furthermore, the fact that the chemo-resistant PSCs were killed by PTM/PTW may offer possibilities for new anti-cancer therapies for pancreatic cancer cells, including PSCs.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000434266900001	Publication Date	2018-06-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	6	Open Access	OpenAccess
	Notes	We gratefully acknowledge financial support from the Research Foundation—Flanders (FWO) (grant number 12J5617N) and from the European Marie Skłodowska–Curie Individual Fellowship ‘Anticancer-PAM’ within Horizon2020 (grant number 743546). We also thank Atsushi Masamune (Division of Gastroenterology, Tohoku University Graduate School of Medicine, Sendai, Miyagi Prefecture, Japan) for providing us with human PSCs (hPSC128-SV) for this study.			Approved	Most recent IF: 2.588
	Call Number	PLASMANT @ plasmant @c:irua:151962			Serial	4997
Permanent link to this record



	Author	Lawson, N.C.; Janyavula, S.; Çakir, D.; Burgess, J.O.
	Title	An analysis of the physiologic parameters of intraoral wear: a review			Type	A1 Journal article
	Year	2013	Publication	Journal Of Physics D-Applied Physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	46	Issue	40	Pages	Unsp 404007
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	This paper reviews the conditions of in vivo mastication and describes a novel method of measuring in vitro wear. Methods: parameters of intraoral wear are reviewed in this analysis, including chewing force, tooth sliding distance, food abrasivity, saliva lubrication, and antagonist properties. Results: clinical measurement of mastication forces indicates a range of normal forces between 20 and 140 N for a single molar. During the sliding phase of mastication, horizontal movement has been measured between 0.9 and 2.86 mm. In vivo wear occurs by three-body abrasion when food particles are interposed between teeth and by two-body abrasion after food clearance. Analysis of food particles used in wear testing reveals that food particles are softer than enamel and large enough to separate enamel and restoration surfaces and act as a solid lubricant. In two-body wear, saliva acts as a boundary lubricant with a viscosity of 3 cP. Enamel is the most relevant antagonist material for wear testing. The shape of a palatal cusp has been estimated as a 0.6 mm diameter ball and the hardest region of a tooth is its enamel surface. pH values and temperatures have been shown to range between 2-7 and 5-55 degrees C in intraoral fluids, respectively. These intraoral parameters have been used to modify the Alabama wear testing method.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos		Publication Date	2013-09-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited		Open Access
	Notes				Approved	Most recent IF: 2.588; 2013 IF: 2.521
	Call Number	UA @ lucian @ c:irua:128322			Serial	4585
Permanent link to this record



	Author	Leliaert, J.; Dvornik, M.; Mulkers, J.; De Clercq, J.; Milošević, M.V.; Van Waeyenberge, B.
	Title	Fast micromagnetic simulations on GPU-recent advances made with mumax³			Type	A1 Journal article
	Year	2018	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	51	Issue	12	Pages	123002
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	In the last twenty years, numerical modeling has become an indispensable part of magnetism research. It has become a standard tool for both the exploration of new systems and for the interpretation of experimental data. In the last five years, the capabilities of micromagnetic modeling have dramatically increased due to the deployment of graphical processing units (GPU), which have sped up calculations to a factor of 200. This has enabled many studies which were previously unfeasible. In this topical review, we give an overview of this modeling approach and show how it has contributed to the forefront of current magnetism research.
	Address
	Corporate Author				Thesis
	Publisher	Iop publishing ltd	Place of Publication	Bristol	Editor
	Language		Wos	000425774100001	Publication Date	2018-01-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	65	Open Access
	Notes	; This work was supported by the Fonds Wetenschappelijk Onderzoek (FWO-Vlaanderen) through Project No. G098917N. JL is supported by the Ghent University Special Research Fund (BOF postdoctoral fellowship). We gratefully acknowledge the support of the NVIDIA Corporation with the donation of a Titan Xp GPU used for this research. ;			Approved	Most recent IF: 2.588
	Call Number	UA @ lucian @ c:irua:149852UA @ admin @ c:irua:149852			Serial	4934
Permanent link to this record



	Author	Leliaert, J.; Gypens, P.; Milošević, M.V.; Van Waeyenberge, B.; Mulkers, J.
	Title	Coupling of the skyrmion velocity to its breathing mode in periodically notched nanotracks			Type	A1 Journal article
	Year	2019	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	52	Issue	2	Pages	024003
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	A thorough understanding of the skyrmion motion through nanotracks is a prerequisite to realize the full potential of spintronic applications like the skyrmion racetrack memory. One of the challenges is to place the data, i.e. skyrmions, on discrete fixed positions, e.g. below a read or write head. In the domain-wall racetrack memory, one proposed solution to this problem was patterning the nanotrack with notches. Following this approach, this paper reports on the skyrmion mobility through a nanotrack with periodic notches (constrictions) made using variations in the chiral Dzyaloshinskii-Moriya interaction. We observe that such notches induce a coupling between the mobility and the skyrmion breathing mode, which manifests itself as velocity-dependent oscillations of the skyrmion diameter and plateaus in which the velocity is independent of the driving force. Despite the fact that domain walls are far more rigid objects than skyrmions, we were able to perform an analogous study and, surprisingly, found even larger plateaus of constant velocity. For both systems it is straightforward to tune the velocity at these plateaus by changing the design of the notched nanotrack geometry, e.g. by varying the distance between the notches. Therefore, the notch-induced coupling between the excited modes and the mobility could offer a strategy to stabilize the velocity against unwanted perturbations in racetrack-like applications. In the last part of the paper we focus on the low-current mobility regimes, whose very rich dynamics at nonzero temperatures are very similar to the operating principle of recently developed probabilistic logic devices. This proves that the mobility of nanomagnetic structures through a periodically modulated track is not only interesting from a fundamental point of view, but has a future in many spintronic applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000449169100001	Publication Date	2018-10-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	10	Open Access
	Notes	; This work is supported by Fonds Wetenschappelijk Onderzoek (FWO-Vlaanderen) through Project No. G098917N. JL acknowledges his postdoctoral fellowships by the Ghent University special research fund (BOF) and FWO-Vlaanderen. The authors gratefully acknowledge the support of NVIDIA Corporation through donation of Titan Xp and Titan V GPU cards used for this research. ;			Approved	Most recent IF: 2.588
	Call Number	UA @ admin @ c:irua:155359			Serial	5202
Permanent link to this record



	Author	Mao, M.; Benedikt, J.; Consoli, A.; Bogaerts, A.
	Title	New pathways for nanoparticle formation in acetylene dusty plasmas: a modelling investigation and comparison with experiments			Type	A1 Journal article
	Year	2008	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	41	Issue		Pages
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, the initial mechanisms of nanoparticle formation and growth in radiofrequency acetylene (C2H2) plasmas are investigated by means of a comprehensive self-consistent one-dimensional (1D) fluid model. This model is an extension of the 1D fluid model, developed earlier by De Bleecker et al. Based on the comparison of our previous results with available experimental data for acetylene plasmas in the literature, some new mechanisms for negative ion formation and growth are proposed. Possible routes are considered for the formation of larger (linear and branched) hydrocarbons C2nH2 (n = 3, 4, 5), which contribute to the generation of C2nH− anions (n = 3, 4, 5) due to dissociative electron attachment. Moreover, the vinylidene anion (H2CC−) and higher anions (n = 24) are found to be important plasma species.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000260738100024	Publication Date	2008-10-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	47	Open Access
	Notes				Approved	Most recent IF: 2.588; 2008 IF: 2.104
	Call Number	UA @ lucian @ c:irua:71018			Serial	2330
Permanent link to this record



	Author	Mao, M.; Bogaerts, A.
	Title	Investigating the plasma chemistry for the synthesis of carbon nanotubes/nanofibres in an inductively coupled plasma enhanced CVD system : the effect of different gas mixtures			Type	A1 Journal article
	Year	2010	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	43	Issue	20	Pages	205201,1-205201,20
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A hybrid model, called the hybrid plasma equipment model (HPEM), was used to study an inductively coupled plasma in gas mixtures of H2 or NH3 with CH4 or C2H2 used for the synthesis of carbon nanotubes or carbon nanofibres (CNTs/CNFs). The plasma properties are discussed for different gas mixtures at low and moderate pressures, and the growth precursors for CNTs/CNFs are analysed. It is found that C2H2, C2H4 and C2H6 are the predominant molecules in CH4 containing plasmas besides the feedstock gas, and serve as carbon sources for CNT/CNF formation. On the other hand, long-chain hydrocarbons are observed in C2H2-containing plasmas. Furthermore, the background gases CH4 and C2H2 show a different decomposition rate with H2 or NH3 addition at moderate pressures.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000277373400009	Publication Date	2010-05-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	52	Open Access
	Notes				Approved	Most recent IF: 2.588; 2010 IF: 2.109
	Call Number	UA @ lucian @ c:irua:82067			Serial	1723
Permanent link to this record



	Author	Mao, M.; Bogaerts, A.
	Title	Investigating the plasma chemistry for the synthesis of carbon nanotubes/nanofibres in an inductively coupled plasma-enhanced CVD system : the effect of processing parameters			Type	A1 Journal article
	Year	2010	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	43	Issue	31	Pages	315203-315203,15
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A parameter study is carried out for an inductively coupled plasma used for the synthesis of carbon nanotubes or carbon nanofibres (CNTs/CNFs), by means of the Hybrid Plasma Equipment Model. The influence of processing parameters including gas ratio for four different gas mixtures typically used for CNT/CNF growth (i.e. CH4/H2, CH4/NH3, C2H2/H2 and C2H2/NH3), inductively coupled plasma (ICP) power (501000 W), operating pressure (10 mTorr1 Torr), bias power (01000 W) and temperature of the substrate (01000 °C) on the plasma chemistry is investigated and the optimized conditions for CNT/CNF growth are analysed. Summarized, our calculations suggest that a lower fraction of hydrocarbon gases (CH4 or C2H2, i.e. below 20%) and hence a higher fraction of etchant gases (H2 or NH3) in the gas mixture result in more 'clean' conditions for controlled CNT/CNF growth. The same applies to a higher ICP power, a moderate ICP gas pressure above 100 mTorr (at least for single-walled carbon nanotubes), a high bias power (for aligned CNTs) and an intermediate substrate temperature.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000280275200007	Publication Date	2010-07-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	17	Open Access
	Notes				Approved	Most recent IF: 2.588; 2010 IF: 2.109
	Call Number	UA @ lucian @ c:irua:88365			Serial	1724
Permanent link to this record



	Author	Mao, M.; Wang, Y.N.; Bogaerts, A.
	Title	Numerical study of the plasma chemistry in inductively coupled SF₆ and SF₆/AR plasmas used for deep silicon etching applications			Type	A1 Journal article
	Year	2011	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	44	Issue	43	Pages	435202,1-435202,15
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A hybrid model, called the hybrid plasma equipment model, was used to study inductively coupled SF6 plasmas used for Si etching applications. The plasma properties such as number densities of electrons, positive and negative ions, and neutrals are calculated under typical etching conditions. The electron kinetics is analysed by means of the electron energy probability function. The plasma chemistry taking place in pure SF6 and in an Ar/SF6 mixture is also discussed, and finally the effect of the argon fraction on the plasma properties is investigated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000296591100004	Publication Date	2011-10-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	20	Open Access
	Notes				Approved	Most recent IF: 2.588; 2011 IF: 2.544
	Call Number	UA @ lucian @ c:irua:91754			Serial	2409
Permanent link to this record



	Author	Martens, T.; Brok, W.J.M.; van Dijk, J.; Bogaerts, A.
	Title	On the regime transitions during the formation of an atmospheric pressure dielectric barrier glow discharge			Type	A1 Journal article
	Year	2009	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	42	Issue	12	Pages	122002,1-122002,5
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The atmospheric pressure dielectric barrier discharge in helium is a pulsed discharge in nature. If during the electrical current pulse a glow discharge is reached, then this pulse will last only a few microseconds in operating periods of sinusoidal voltage with lengths of about 10 to 100 µs. In this paper we demonstrate that right before a glow discharge is reached, the discharge very closely resembles the commonly assumed Townsend discharge structure, but actually contains some significant differing features and hence should not be considered as a Townsend discharge. In order to clarify this, we present calculation results of high time and space resolution of the pulse formation. The results indicate that indeed a maximum of ionization is formed at the anode, but that the level of ionization remains high and that the electric field at that time is significantly disturbed. Our results also show where this intermediate structure comes from.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000266639300002	Publication Date	2009-05-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	21	Open Access
	Notes				Approved	Most recent IF: 2.588; 2009 IF: 2.083
	Call Number	UA @ lucian @ c:irua:76458			Serial	2450
Permanent link to this record



	Author	Neyts, E.; Bogaerts, A.; van de Sanden, M.C.M.
	Title	Densification of thin a-C: H films grown from low-kinetic energy hydrocarbon radicals under the influence of H and C particle fluxes: a molecular dynamics study			Type	A1 Journal article
	Year	2006	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	39	Issue	9	Pages	1948-1953
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000238233900035	Publication Date	2006-04-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	3	Open Access
	Notes				Approved	Most recent IF: 2.588; 2006 IF: 2.077
	Call Number	UA @ lucian @ c:irua:57254			Serial	634
Permanent link to this record



	Author	Neyts, E.C.; Bogaerts, A.
	Title	Understanding plasma catalysis through modelling and simulation : a review			Type	A1 Journal article
	Year	2014	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	47	Issue	22	Pages	224010
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Plasma catalysis holds great promise for environmental applications, provided that the process viability can be maximized in terms of energy efficiency and product selectivity. This requires a fundamental understanding of the various processes taking place and especially the mutual interactions between plasma and catalyst. In this review, we therefore first examine the various effects of the plasma on the catalyst and of the catalyst on the plasma that have been described in the literature. Most of these studies are purely experimental. The urgently needed fundamental understanding of the mechanisms underpinning plasma catalysis, however, may also be obtained through modelling and simulation. Therefore, we also provide here an overview of the modelling efforts that have been developed already, on both the atomistic and the macroscale, and we identify the data that can be obtained with these models to illustrate how modelling and simulation may contribute to this field. Last but not least, we also identify future modelling opportunities to obtain a more complete understanding of the various underlying plasma catalytic effects, which is needed to provide a comprehensive picture of plasma catalysis.
	Address
	Corporate Author				Thesis
	Publisher	Iop publishing ltd	Place of Publication	Bristol	Editor
	Language		Wos	000336207900011	Publication Date	2014-05-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	130	Open Access
	Notes				Approved	Most recent IF: 2.588; 2014 IF: 2.721
	Call Number	UA @ lucian @ c:irua:116920			Serial	3803
Permanent link to this record



	Author	Neyts, E.C.; Yusupov, M.; Verlackt, C.C.; Bogaerts, A.
	Title	Computer simulations of plasmabiomolecule and plasmatissue interactions for a better insight in plasma medicine			Type	A1 Journal article
	Year	2014	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	47	Issue	29	Pages	293001
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Plasma medicine is a rapidly evolving multidisciplinary field at the intersection of chemistry, biochemistry, physics, biology, medicine and bioengineering. It holds great potential in medical, health care, dentistry, surgical, food treatment and other applications. This multidisciplinary nature and variety of possible applications come along with an inherent and intrinsic complexity. Advancing plasma medicine to the stage that it becomes an everyday tool in its respective fields requires a fundamental understanding of the basic processes, which is lacking so far. However, some major advances have already been made through detailed experiments over the last 15 years. Complementary, computer simulations may provide insight that is difficultif not impossibleto obtain through experiments. In this review, we aim to provide an overview of the various simulations that have been carried out in the context of plasma medicine so far, or that are relevant for plasma medicine. We focus our attention mostly on atomistic simulations dealing with plasmabiomolecule interactions. We also provide a perspective and tentative list of opportunities for future modelling studies that are likely to further advance the field.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000338860300001	Publication Date	2014-06-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	28	Open Access
	Notes				Approved	Most recent IF: 2.588; 2014 IF: 2.721
	Call Number	UA @ lucian @ c:irua:117853			Serial	472
Permanent link to this record



	Author	O'Donnell, D.; Hassan, S.; Du, Y.; Gauquelin, N.; Krishnan, D.; Verbeeck, J.; Fan, R.; Steadman, P.; Bencok, P.; Dobrynin, A.N.
	Title	Etching induced formation of interfacial FeMn in IrMn/CoFe bilayers			Type	A1 Journal article
	Year	2019	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	52	Issue	16	Pages	165002
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The effect of ion etching on exchange bias in IrMn3/Co70Fe30 bilayers is investigated. In spite of the reduction of saturation magnetization caused by the embedding of Tr from the capping layer into the Co70Fe30 layer during the etching process, the exchange bias in samples with the same thickness of the Co70Fe30 layer is reducing in proportion to the etching power. X-ray magnetic circular dichroism measurements revealed the emergence of an uncompensated Mn magnetization after etching, which is antiferromagnetically coupled to the ferromagnetic layer. This suggests etching induced formation of small interfacial FeMn regions which leads to the decrease of effective exchange coupling between ferromagnetic and antiferromagnetic layers.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000458524800001	Publication Date	2019-01-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor	2.588	Times cited		Open Access	OpenAccess
	Notes	; This work was supported by Seagate Technology (Ireland). Beamline I10, Diamond Light Source, is acknowledged for provided beamtime. ;			Approved	Most recent IF: 2.588
	Call Number	UA @ admin @ c:irua:157458			Serial	5247
Permanent link to this record



	Author	Ozkan, A.; Bogaerts, A.; Reniers, F.
	Title	Routes to increase the conversion and the energy efficiency in the splitting of CO₂by a dielectric barrier discharge			Type	A1 Journal article
	Year	2017	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	50	Issue	50	Pages	084004
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Here, we present routes to increase CO2 conversion into CO using an atmospheric pressure dielectric-barrier discharge. The change in conversion as a function of simple plasma parameters, such as power, flow rate, but also frequency, on-and-off power pulse, thickness and the chemical nature of the dielectric, wall and gas temperature, are described. By means of an in-depth electrical characterization of the discharge (effective plasma voltage, dielectric voltage, plasma current, number and lifetime of the microdischarges), combined with infrared analysis of the walls of the reactor, optical emission spectroscopy for the gas temperature, and mass spectrometry for the CO2 conversion, we propose a global interpretation of the effect of all the experimental parameters on the conversion and efficiency of the reaction.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000395400700001	Publication Date	2017-01-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	28	Open Access	OpenAccess
	Notes	The authors acknowledge financial support from the IAPVII/ 12, P7/34 (Interuniversity Attraction Pole) program PSIPhysical Chemistry of Plasma–Surface Interaction financially supported by the Belgian Federal Office for Science Policy (BELSPO). A Ozkan would like to thank the financial support given by the Fonds David et Alice Van Buuren.			Approved	Most recent IF: 2.588
	Call Number	PLASMANT @ plasmant @ c:irua:140093			Serial	4415
Permanent link to this record



	Author	Petrović, D.; Martens, T.; van Dijk, J.; Brok, W.J.M.; Bogaerts, A.
	Title	Fluid modelling of an atmospheric pressure dielectric barrier discharge in cylindrical geometry			Type	A1 Journal article
	Year	2009	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	42	Issue	20	Pages	205206,1-205206,12
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A numerical parameter study has been performed for a cylindrical atmospheric pressure dielectric barrier discharge (DBD) in helium with nitrogen impurities using a two-dimensional time-dependent fluid model. The calculated electric currents and gap voltages as a function of time for a given applied potential are presented, as well as the number densities of the various plasma species. This study shows that for the geometry under consideration the applied voltage parameters have a large impact on the electric current profiles and that the discharge current is always determined by the electron and ion conduction currents while the displacement current is nearly negligible. A relative broadening of the current profiles (compared with the duration of the half cycle of the applied voltage) with an increase in the applied frequency is obtained. Nearly sinusoidal current wave forms, usually typical for radio frequency DBDs, are observed while still operating at the frequencies of tens of kilohertz. For the setup under investigation, the Townsend mode of the DBD is observed in the entire range of applied voltage amplitudes and frequencies. It is shown that the average power density dissipated in the discharge increases with rising applied voltage and frequency. An increase in applied voltage frequency leads to an increase in the electron density and a decrease in electron energy, while increasing the voltage amplitude has the opposite effect.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000270563200028	Publication Date	2009-09-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	29	Open Access
	Notes				Approved	Most recent IF: 2.588; 2009 IF: 2.083
	Call Number	UA @ lucian @ c:irua:78202			Serial	1228
Permanent link to this record



	Author	Razzokov, J.; Yusupov, M.; Cordeiro, R.M.; Bogaerts, A.
	Title	Atomic scale understanding of the permeation of plasma species across native and oxidized membranes			Type	A1 Journal article
	Year	2018	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	51	Issue	36	Pages	365203
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Cold atmospheric plasmas (CAPs) have attracted significant interest for their potential benefits in medical applications, including cancer therapy. The therapeutic effects of CAPs are related to reactive oxygen and nitrogen species (ROS and RNS) present in the plasma. The impact of ROS has been extensively studied, but the role of RNS in CAP-treatment remains poorly understood at the molecular level. Here, we investigate the permeation of RNS and ROS across native and oxidized phospholipid bilayers (PLBs) by means of computer simulations. The results reveal significantly lower free energy barriers for RNS (i.e. NO, NO2, N2O4) and O3 compared to hydrophilic ROS, such as OH, HO2 and H2O2. This suggests that the investigated RNS and O3 can permeate more easily through both native and oxidized PLBs in comparison to hydrophilic ROS, indicating their potentially important role in plasma medicine.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000441182400002	Publication Date	2018-08-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	10	Open Access	OpenAccess
	Notes	M Y gratefully acknowledges financial support from the Research Foundation—Flanders (FWO), grant 1200216N. The computational work was carried out using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen (UA), a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI) and the UA. RMC thanks FAPESP and CNPq for financial support (grants 2012/50680-5 and 459270/2014-1, respectively).			Approved	Most recent IF: 2.588
	Call Number	PLASMANT @ plasmant @c:irua:152824			Serial	5005
Permanent link to this record



	Author	Rubino, S.; Schattschneider, P.; Rusz, J.; Verbeeck, J.; Leifer, K.
	Title	Simulation of magnetic circular dichroism in the electron microscope			Type	A1 Journal article
	Year	2010	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	43	Issue	47	Pages	474005,1-474005,11
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	As electron energy-loss spectroscopy (EELS) and x-ray absorption spectroscopy (XAS) probe the same transitions from coreshell states to unoccupied states above the Fermi energy, it should always be possible to apply the two techniques to the same physical phenomena, such as magnetic dichroism, and obtain the same information. Indeed, the similarity in the expression of the electron and x-ray cross-sections had been already exploited to prove the equivalence of x-ray magnetic linear dichroism and anisotropy in EELS, by noting that the polarization vector of a photon plays the same role as the momentum transfer in electron scattering. Recently, the same was proven true for x-ray magnetic circular dichroism (XMCD) by establishing a new TEM technique called EMCD (electron energy-loss magnetic chiral dichroism) (Schattschneider P et al 2006 Nature 441 4868), which makes use of special electron scattering conditions to force the absorption of a circularly polarized virtual photon. The intrinsic advantage of EMCD over XMCD is the high spatial resolution of electron microscopes, which are readily available. Among the particular obstacles in EMCD that do not exist for synchrotron radiation, is the notoriously low signal and the very particular scattering conditions necessary to observe a chiral dichroic signal. In spite of that, impressive progress has been made in recent years. The signal strength could be considerably increased, and some innovations such as using a convergent beam have been introduced. EMCD has evolved into several techniques, which make full use of the versatility of the TEM and energy filtering, spectroscopy or STEM conditions (Rubino S 2007 Magnetic circular dichroism in the transmission electron microscope PhD Thesis Vienna University of Technology, Vienna, Austria).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000284099700006	Publication Date	2010-11-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	13	Open Access
	Notes				Approved	Most recent IF: 2.588; 2010 IF: 2.109
	Call Number	UA @ lucian @ c:irua:85808UA @ admin @ c:irua:85808			Serial	3012
Permanent link to this record



	Author	Setareh, M.; Farnia, M.; Maghari, A.; Bogaerts, A.
	Title	CF₄ decomposition in a low-pressure ICP : influence of applied power and O₂ content			Type	A1 Journal article
	Year	2014	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	47	Issue	35	Pages	355205
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	This paper focuses on the investigation of CF4 decomposition in a low-pressure inductively coupled plasma by means of a global model. The influence of O2 on the CF4 decomposition process is studied for conditions used in semiconductor manufacturing processes. The model is applied for different powers and O2 contents ranging between 2% and 98% in the CF4/O2 gas mixture. The model includes the reaction mechanisms in the gas phase coupled with the surface reactions and sticking probabilities of the species at the walls. The calculation results are first compared with experimental results from the literature (for the electron density, temperature and F atom density) at a specific power, in the entire range of CF4/O2 gas mixture ratios, and the obtained agreements indicate the validity of the model. The main products of the gas mixture, obtained from this model, include CO, CO2 and COF2 together with a low fraction of F2. The most effective reactions for the formation and loss of the various species in this process are also determined in detail. Decomposition of CF4 produces mostly CF3 and F radicals. These radicals also contribute to the backward reactions, forming again CF4. This study reveals that the maximum decomposition efficiency of CF4 is achieved at a CF4/O2 ratio equal to 1, at the applied power of 300 W.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000341353800017	Publication Date	2014-08-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	8	Open Access
	Notes				Approved	Most recent IF: 2.588; 2014 IF: 2.721
	Call Number	UA @ lucian @ c:irua:118327			Serial	3521
Permanent link to this record



	Author	Song, C.-H.; Attri, P.; Ku, S.-K.; Han, I.; Bogaerts, A.; Choi, E.H.
	Title	Cocktail of reactive species generated by cold atmospheric plasma: oral administration induces non-small cell lung cancer cell death			Type	A1 Journal article
	Year	2021	Publication	Journal Of Physics D-Applied Physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	54	Issue	18	Pages	185202
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Non-small cell lung cancer (NSCLC) is the most common type of lung cancer, with 85% of all lung cancer reported as NSCLC. Moreover, there are no effective treatments in advanced NSCLC. This study shows for the first time that oral administration of plasma-treated water (PTW) can cure advanced NSCLC. The cold plasma in water generates a cocktail of reactive species, and oral administration of this cocktail to mice showed no toxicities even at the highest dose of PTW, after a single dose and repeated doses for 28 d in mice. In vivo studies reveal that PTW showed favorable anticancer effects on chemo-resistant lung cancer, similarly to gefitinib treatment as a reference drug in a chemo-resistant NSCLC model. The anticancer activities of PTW seem to be involved in inhibiting proliferation and angiogenesis and enhancing apoptosis in the cancer cells. Interestingly, the PTW contributes to enhanced immune response and improved cachexia in the model.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000621503200001	Publication Date	2021-05-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited		Open Access	OpenAccess
	Notes	National Research Foundation (NRF) of Korea, NRF-2016K1A4A3914113 ; We gratefully acknowledge financial support from the Leading Foreign Research Institute Recruitment program (Grant # NRF-2016K1A4A3914113) through the Basic Science Research Program of the National Research Foundation (NRF) of Korea and in part by Kwangwoon University.			Approved	Most recent IF: 2.588
	Call Number	PLASMANT @ plasmant @c:irua:176649			Serial	6747
Permanent link to this record



	Author	Tinck, S.; Bogaerts, A.
	Title	Computational study of the CF₄ /CHF₃ / H₂ /Cl₂ /O₂ /HBr gas phase plasma chemistry			Type	A1 Journal article
	Year	2016	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	49	Issue	49	Pages	195203
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A modelling study is performed of high-density low-pressure inductively coupled CF4/CHF3/H2/Cl2/O2/HBr plasmas under different gas mixing ratios. A reaction set describing the complete plasma chemistry is presented and discussed. The gas fraction of each component in this mixture is varied to investigate the sensitivity of the plasma properties, like electron density, plasma potential and species densities, towards the gas mixing ratios. This research is of great interest for microelectronics applications because these gases are often combined in two (or more)-component mixtures, and mixing gases or changing the fraction of a gas can sometimes yield unwanted reaction products or unexpected changes in the overall plasma properties due to the increased chemical complexity of the system. Increasing the CF4 fraction produces more F atoms for chemical etching as expected, but also more prominently lowers the density of Cl atoms, resulting in an actual drop in the etch rate under certain conditions. Furthermore, CF4 decreases the free electron density when mixed with Cl2. However, depending on the other gas components, CF4 gas can also sometimes enhance free electron density. This is the case when HBr is added to the mixture. The addition of H2 to the gas mixture will lower the sputtering process, not only due to the lower overall positive ion density at higher H2 fractions, but also because more H+, H2 + and H3 + are present and they have very low sputter yields. In contrast, a larger Cl2 fraction results in more chemical etching but also in less physical sputtering due to a smaller abundance of positive ions. Increasing the O2 fraction in the plasma will always lower the etch rate due to more oxidation of the wafer surface and due to a lower plasma density. However, it is also observed that the density of F atoms can actually increase with rising O2 gas fraction. This is relevant to note because the exact balance between fluorination and oxidation is important for fine-tuning the overall etch rate and for control of the sidewall profile. Finally, HBr is often used as a chemical etcher, but when mixed with F- or Cl-containing gases, HBr creates the same diluting effects as Ar or He, because a higher fraction results in less chemical etching but more (physical) sputtering.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000375255500017	Publication Date	2016-04-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	5	Open Access
	Notes	We acknowledge the Fund for Scientific Research Flanders (FWO) for financial support of this work. This work was carried out in part using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI) and the University of Antwerp.			Approved	Most recent IF: 2.588
	Call Number	c:irua:132890			Serial	4062
Permanent link to this record



	Author	Tinck, S.; Bogaerts, A.
	Title	Role of vibrationally excited HBr in a HBr/He inductively coupled plasma used for etching of silicon			Type	A1 Journal article
	Year	2016	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	49	Issue	49	Pages	245204
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this work, the role of vibrationally excited HBr (HBr(vib)) is computationally investigated for a HBr/He inductively coupled plasma applied for Si etching. It is found that at least 50% of all dissociations of HBr occur through HBr(vib). This additional dissociation pathway through HBr(vib) makes the plasma significantly more atomic. It also results in a slightly higher electron temperature (i.e. about 0.2 eV higher compared to simulation results where HBr(vib) is not included), as well as a higher gas temperature (i.e. about 50 K higher than without including HBr(vib)), due to the enhanced Franck–Condon heating through HBr(vib) dissociation, at the conditions investigated. Most importantly, the calculated etch rate with HBr(vib) included in the model is a factor 3 higher than in the case without HBr(vib), due to the higher fluxes of etching species (i.e. H and Br), while the chemical composition of the wafer surface shows no significant difference. Our calculations clearly show the importance of including HBr(vib) for accurate modeling of HBr-containing plasmas.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000377427100020	Publication Date	2016-05-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited		Open Access
	Notes	The Fund for Scientific Research Flanders (FWO) is acknowledged for financial support of this work (Grant no. 0880.212.840). This work was carried out in part using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI) and the University of Antwerp. Prof. Mark Kushner is also gratefully acknowledged for the useful discussions and for providing the HPEM code.			Approved	Most recent IF: 2.588
	Call Number	c:irua:133457			Serial	4072
Permanent link to this record



	Author	Tinck, S.; Boullart, W.; Bogaerts, A.
	Title	Investigation of etching and deposition processes of Cl₂/O₂/Ar inductively coupled plasmas on silicon by means of plasmasurface simulations and experiments			Type	A1 Journal article
	Year	2009	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	42	Issue		Pages	095204,1-095204,13
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, a simulation method is described to predict the etching behaviour of Cl2/O2/Ar inductively coupled plasmas on a Si substrate, as used in shallow trench isolation for the production of electronic devices. The hybrid plasma equipment model (HPEM) developed by Kushner et al is applied to calculate the plasma characteristics in the reactor chamber and two additional Monte Carlo simulations are performed to predict the fluxes, angles and energy of the plasma species bombarding the Si substrate, as well as the resulting surface processes such as etching and deposition. The simulations are performed for a wide variety of operating conditions such as gas composition, chamber pressure, power deposition and substrate bias. It is predicted by the simulations that when the fraction of oxygen in the gas mixture is too high, the oxidation of the Si substrate is superior to the etching of Si by chlorine species, resulting in an etch rate close to zero as is also observed in the experiments.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000265531000030	Publication Date	2009-04-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	23	Open Access
	Notes				Approved	Most recent IF: 2.588; 2009 IF: 2.083
	Call Number	UA @ lucian @ c:irua:75601			Serial	1731
Permanent link to this record



	Author	Tinck, S.; Boullart, W.; Bogaerts, A.
	Title	Simulation of an Ar/Cl₂ inductively coupled plasma: study of the effect of bias, power and pressure and comparison with experiments			Type	A1 Journal article
	Year	2008	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	41	Issue	6	Pages	065207,1-14
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A hybrid model, called the hybrid plasma equipment model, was used to study Ar/Cl(2) inductively coupled plasmas used for the etching of Si. The effects of substrate bias, source power and gas pressure on the plasma characteristics and on the fluxes and energies of plasma species bombarding the substrate were observed. A comparison with experimentally measured etch rates was made to investigate how the etch process is influenced and which plasma species mainly account for the etch process. First, the general plasma characteristics are investigated at the following operating conditions: 10% Ar 90% Cl(2) gas mixture, 5mTorr total gas pressure, 100 sccm gas flow rate, 250W source power, -200V dc bias at the substrate electrode and an operating frequency of 13.56MHz applied to the coil and to the substrate electrode. Subsequently, the pressure is varied from 5 to 80mTorr, the substrate bias from -100 to -300V and the source power from 250 to 1000W. Increasing the total gas pressure results in a decrease of the etch rate and a less anisotropic flux to the substrate due to more collisions of the ions in the sheath. Increasing the substrate bias has an effect on the energy of the ions bombarding the substrate and to a lesser extent on the magnitude of the ion flux. When source power is increased, it was found that, not the energy, but the magnitude of the ion flux is increased. The etch rate was more influenced by a variation of the substrate bias than by a variation of the source power, at these operating conditions. These results suggest that the etch process is mainly affected by the energy of the ions bombarding the substrate and the magnitude of the ion flux, and to a lesser extent by the magnitude of the radical flux.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000254153900022	Publication Date	2008-02-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	31	Open Access
	Notes				Approved	Most recent IF: 2.588; 2008 IF: 2.104
	Call Number	UA @ lucian @ c:irua:67019			Serial	3010
Permanent link to this record



	Author	Tinck, S.; Tillocher, T.; Dussart, R.; Bogaerts, A.
	Title	Cryogenic etching of silicon with SF₆ inductively coupled plasmas: a combined modelling and experimental study			Type	A1 Journal article
	Year	2015	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	48	Issue	48	Pages	155204
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A hybrid Monte Carlofluid model is applied to simulate the wafer-temperature-dependent etching of silicon with SF6 inductively coupled plasmas (ICP). The bulk plasma within the ICP reactor volume as well as the surface reactions occurring at the wafer are self-consistently described. The calculated etch rates are validated by experiments. The calculations and experiments are performed at two different wafer temperatures, i.e. 300 and 173 K, resembling conventional etching and cryoetching, respectively. In the case of cryoetching, a physisorbed SFx layer (x = 06) is formed on the wafer, which is negligible at room temperature, because of fast thermal desorption, However, even in the case of cryoetching, this layer can easily be disintegrated by low-energy ions, so it does not affect the etch rates. In the investigated pressure range of 19 Pa, the etch rate is always slightly higher at cryogenic conditions, both in the experiments and in the model, and this could be explained in the model due to a local cooling of the gas above the wafer, making the gas denser and increasing the flux of reactive neutrals, like F and F2, towards the wafer.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000351856600009	Publication Date	2015-03-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	9	Open Access
	Notes				Approved	Most recent IF: 2.588; 2015 IF: 2.721
	Call Number	c:irua:124209			Serial	551
Permanent link to this record



	Author	Tinck, S.; Tillocher, T.; Dussart, R.; Neyts, E.C.; Bogaerts, A.
	Title	Elucidating the effects of gas flow rate on an SF₆inductively coupled plasma and on the silicon etch rate, by a combined experimental and theoretical investigation			Type	A1 Journal article
	Year	2016	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	49	Issue	49	Pages	385201
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Experiments show that the etch rate of Si with SF6 inductively coupled plasma (ICP) is significantly influenced by the absolute gas flow rate in the range of 50–600 sccm, with a maximum at around 200 sccm. Therefore, we numerically investigate the effects of the gas flow rate on the bulk plasma properties and on the etch rate, to obtain more insight in the underlying reasons of this effect. A hybrid Monte Carlo—fluid model is applied to simulate an SF6 ICP. It is found that the etch rate is influenced by two simultaneous effects: (i) the residence time of the gas and (ii) the temperature profile of the plasma in the ICP volume, resulting indeed in a maximum etch rate at 200 sccm.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000384095900011	Publication Date	2016-08-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	1	Open Access
	Notes	We are very grateful to Mark Kushner for providing the computational model. The Fund for Scientific Research Flanders (FWO; grant no. 0880.212.840) is acknowledged for financial support of this work. The work was carried out in part using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI) and the University of Antwerp.			Approved	Most recent IF: 2.588
	Call Number	c:irua:134867			Serial	4108
Permanent link to this record



	Author	Van der Paal, J.; Aernouts, S.; van Duin, A.C.T.; Neyts, E.C.; Bogaerts, A.
	Title	Interaction of O and OH radicals with a simple model system for lipids in the skin barrier : a reactive molecular dynamics investigation for plasma medicine			Type	A1 Journal article
	Year	2013	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	46	Issue	39	Pages	395201
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Plasma medicine has been claimed to provide a novel route to heal wounds and regenerate skin, although very little is currently known about the elementary processes taking place. We carried out a series of ReaxFF-based reactive molecular dynamics simulations to investigate the interaction of O and OH radicals with lipids, more specifically with α-linolenic acid as a model for the free fatty acids present in the upper skin layer. Our calculations predict that the O and OH radicals most typically abstract a H atom from the fatty acids, which can lead to the formation of a conjugated double bond, but also to the incorporation of alcohol or aldehyde groups, thereby increasing the hydrophilic character of the fatty acids and changing the general lipid composition of the skin. Within the limitations of the investigated model, no formation of possibly toxic products was observed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000324810400007	Publication Date	2013-09-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	36	Open Access
	Notes				Approved	Most recent IF: 2.588; 2013 IF: 2.521
	Call Number	UA @ lucian @ c:irua:109904			Serial	1684
Permanent link to this record



	Author	Van der Paal, J.; Verlackt, C.C.; Yusupov, M.; Neyts, E.C.; Bogaerts, A.
	Title	Structural modification of the skin barrier by OH radicals : a reactive molecular dynamics study for plasma medicine			Type	A1 Journal article
	Year	2015	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	48	Issue	48	Pages	155202
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	While plasma treatment of skin diseases and wound healing has been proven highly effective, the underlying mechanisms, and more generally the effect of plasma radicals on skin tissue, are not yet completely understood. In this paper, we perform ReaxFF-based reactive molecular dynamics simulations to investigate the interaction of plasma generated OH radicals with a model system composed of free fatty acids, ceramides, and cholesterol molecules. This model system is an approximation of the upper layer of the skin (stratum corneum). All interaction mechanisms observed in our simulations are initiated by H-abstraction from one of the ceramides. This reaction, in turn, often starts a cascade of other reactions, which eventually lead to the formation of aldehydes, the dissociation of ceramides or the elimination of formaldehyde, and thus eventually to the degradation of the skin barrier function.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000351856600007	Publication Date	2015-03-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	20	Open Access
	Notes				Approved	Most recent IF: 2.588; 2015 IF: 2.721
	Call Number	c:irua:124230			Serial	3242
Permanent link to this record



	Author	van Dijk, J.; Kroesen, G.M.W.; Bogaerts, A.
	Title	Plasma modelling and numerical simulation			Type	Editorial
	Year	2009	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	42	Issue	19	Pages	190301,1-190301,14
	Keywords	Editorial; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Plasma modelling is an exciting subject in which virtually all physical disciplines are represented. Plasma models combine the electromagnetic, statistical and fluid dynamical theories that have their roots in the 19th century with the modern insights concerning the structure of matter that were developed throughout the 20th century. The present cluster issue consists of 20 invited contributions, which are representative of the state of the art in plasma modelling and numerical simulation. These contributions provide an in-depth discussion of the major theories and modelling and simulation strategies, and their applications to contemporary plasma-based technologies. In this editorial review, we introduce and complement those papers by providing a bird's eye perspective on plasma modelling and discussing the historical context in which it has surfaced.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000269993100001	Publication Date	2009-09-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	64	Open Access
	Notes				Approved	Most recent IF: 2.588; 2009 IF: 2.083
	Call Number	UA @ lucian @ c:irua:78166			Serial	2637
Permanent link to this record



	Author	Van Gaens, W.; Bogaerts, A.
	Title	Kinetic modelling for an atmospheric pressure argon plasma jet in humid air			Type	A1 Journal article
	Year	2013	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	46	Issue	27	Pages	275201-275253
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A zero-dimensional, semi-empirical model is used to describe the plasma chemistry in an argon plasma jet flowing into humid air, mimicking the experimental conditions of a setup from the Eindhoven University of Technology. The model provides species density profiles as a function of the position in the plasma jet device and effluent. A reaction chemistry set for an argon/humid air mixture is developed, which considers 84 different species and 1880 reactions. Additionally, we present a reduced chemistry set, useful for higher level computational models. Calculated species density profiles along the plasma jet are shown and the chemical pathways are explained in detail. It is demonstrated that chemically reactive H, N, O and OH radicals are formed in large quantities after the nozzle exit and H2, O2(1Δg), O3, H2O2, NO2, N2O, HNO2 and HNO3 are predominantly formed as 'long living' species. The simulations show that water clustering of positive ions is very important under these conditions. The influence of vibrational excitation on the calculated electron temperature is studied. Finally, the effect of varying gas temperature, flow speed, power density and air humidity on the chemistry is investigated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000320854700009	Publication Date	2013-06-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	115	Open Access
	Notes				Approved	Most recent IF: 2.588; 2013 IF: 2.521
	Call Number	UA @ lucian @ c:irua:108725			Serial	1758
Permanent link to this record