Records |
Author |
Bartova, B.; Wiese, N.; Schryvers, D.; Chapman, J.N.; Ignacova, S. |
Title |
Microstructure of precipitates and magnetic domain structure in an annealed Co38Ni33Al29 shape memory alloy |
Type |
A1 Journal article |
Year |
2008 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
56 |
Issue |
16 |
Pages |
4470-4476 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
The microstructure of a Co38Ni33Al29 ferromagnetic shape memory alloy was determined by conventional transmission electron microscopy (TEM), electron diffraction studies together with advanced microscopy techniques and in situ Lorentz microscopy. Rod-like precipitates, 1060 nm long, of hexagonal close-packed -Co were confirmed to be present by high-resolution TEM. The orientation relationship between the precipitates and B2 matrix is described by the Burgers orientation relationship. The crystal structure of the martensite obtained after cooling is tetragonal L10 with a (111) twinning plane. The magnetic domain structure was determined during an in situ cooling experiment using the Fresnel mode of Lorentz microscopy. While transformation proceeds from B2 austenite to L10 martensite, new domains are nucleated, leading to a decrease in domain width, with the magnetization lying predominantly along a single direction. It was possible to completely describe the relationship between magnetic domains and crystallographic directions in the austenite phase though complications existed for the martensite phase. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000259931300033 |
Publication Date |
2008-06-11 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
23 |
Open Access |
|
Notes |
Multimat |
Approved |
Most recent IF: 5.301; 2008 IF: 3.729 |
Call Number |
UA @ lucian @ c:irua:72321 |
Serial |
2072 |
Permanent link to this record |
|
|
|
Author |
Boullay, P.; Schryvers, D.; Ball, J.M. |
Title |
Nano-structures at martensite macrotwin interfaces in Ni65Al35 |
Type |
A1 Journal article |
Year |
2003 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
51 |
Issue |
5 |
Pages |
1421-1436 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
The atomic configurations at macrotwin interfaces between microtwinned martensite plates in Ni65Al35 material are investigated using transmission electron microscopy. The observed structures are interpreted in view of possible formation mechanisms for these interfaces. A distinction is made between cases in which the microtwins, originating from mutually perpendicular {110} austenite planes, enclose a final angle larger or smaller than 90degrees. Two different configurations, a crossing and a step type are described. Depending on the actual case, tapering, bending and tip splitting of the smaller microtwinvariants are observed. The most reproducible deformations occur in a region of approximately 5-10 nm width around the interface while a variety of structural defects are observed further away from the interface. These structures and deformations are interpreted in terms of the coalescence of two separately nucleated microtwinned martensite plates and the need to accommodate remaining stresses. (C) 2003 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000181677700018 |
Publication Date |
2003-03-14 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
31 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 5.301; 2003 IF: 3.059 |
Call Number |
UA @ lucian @ c:irua:48364 |
Serial |
2248 |
Permanent link to this record |
|
|
|
Author |
Potapov, P.L.; Ochin, P.; Pons, J.; Schryvers, D. |
Title |
Nanoscale inhomogeneities in melt-spun Ni-Al |
Type |
A1 Journal article |
Year |
2000 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
48 |
Issue |
|
Pages |
3833-3845 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000089632800003 |
Publication Date |
2002-07-25 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
28 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 5.301; 2000 IF: 2.166 |
Call Number |
UA @ lucian @ c:irua:48362 |
Serial |
2265 |
Permanent link to this record |
|
|
|
Author |
Potapov, P.; Shelyakov, A.; Schryvers, D. |
Title |
On the crystal structure of TiNi-Cu martensite |
Type |
A1 Journal article |
Year |
2001 |
Publication |
Scripta materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
44 |
Issue |
|
Pages |
1-7 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000166808100001 |
Publication Date |
2002-07-25 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
36 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.747; 2001 IF: 1.130 |
Call Number |
UA @ lucian @ c:irua:48378 |
Serial |
2433 |
Permanent link to this record |
|
|
|
Author |
Idrissi, H.; Renard, K.; Ryelandt, L.; Schryvers, D.; Jacques, P.J. |
Title |
On the mechanism of twin formation in FeMnC TWIP steels |
Type |
A1 Journal article |
Year |
2010 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
58 |
Issue |
7 |
Pages |
2464-2476 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Although it is well known that FeMnC TWIP steels exhibit high work-hardening rates, the elementary twinning mechanisms controlling the plastic deformation of these steels have still not been characterized. The aim of the present study is to analyse the extended defects related to the twinning occurrence using transmission electron microscopy. Based on these observations, the very early stage of twin nucleation can be attributed to the pole mechanism with deviation proposed by Cohen and Weertman or to the model of Miura, Takamura and Narita, while the twin growth is controlled by the pole mechanism proposed by Venables. High densities of sessile Frank dislocations are observed within the twins at the early stage of deformation, which can affect the growth and the stability of the twins, but also the strength of these twins and their interactions with the gliding dislocations present in the matrix. This experimental evidence is discussed and compared to recent results in order to relate the defects analysis to the macroscopic behaviour of this category of material. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000276523200018 |
Publication Date |
2010-01-25 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
244 |
Open Access |
|
Notes |
Iap |
Approved |
Most recent IF: 5.301; 2010 IF: 3.791 |
Call Number |
UA @ lucian @ c:irua:82270 |
Serial |
2441 |
Permanent link to this record |
|
|
|
Author |
Idrissi, H.; Renard, K.; Schryvers, D.; Jacques, P.J. |
Title |
On the relationship between the twin internal structure and the work-hardening rate of TWIP steels |
Type |
A1 Journal article |
Year |
2010 |
Publication |
Scripta materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
63 |
Issue |
10 |
Pages |
961-964 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
FeMnC and FeMnSiAl TWIP steels deformed under the same conditions exhibit different work-hardening rates. The present study investigates the microstructure of plastically deformed FeMnC and FeMnSiAl samples, particularly the internal structure of the mechanically generated twins and their topology at the grain scale. Twins in the FeMnC steel are finer and full of sessile dislocations, rendering this material distinctly stronger with an improved work-hardening rate. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000282461800003 |
Publication Date |
2010-07-20 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
145 |
Open Access |
|
Notes |
Iap |
Approved |
Most recent IF: 3.747; 2010 IF: 2.820 |
Call Number |
UA @ lucian @ c:irua:84472 |
Serial |
2452 |
Permanent link to this record |
|
|
|
Author |
Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J. |
Title |
On the stress state dependence of the twinning rate and work hardening in twinning-induced plasticity steels |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Scripta materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
66 |
Issue |
12 |
Pages |
966-971 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
The influence of the stress state on the twinning rate and work hardening is studied in the case of an FeMnC TWIP steel strained in uniaxial tension, simple shear and rolling. The resulting stressstrain responses exhibit marked differences. The twinning rate, number of activated twinning systems in each grain, twin thickness and transmission of twins across grain boundaries are dependent on the imposed stress state during straining. Relationships between twin features and macroscopic work hardening rate are established. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000304641500004 |
Publication Date |
2012-02-10 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
41 |
Open Access |
|
Notes |
Iap |
Approved |
Most recent IF: 3.747; 2012 IF: 2.821 |
Call Number |
UA @ lucian @ c:irua:98374 |
Serial |
2454 |
Permanent link to this record |
|
|
|
Author |
Viart, N.; Sayed Hassan, R.; Ulhaq-Bouillet, C.; Meny, C.; Panissod, P.; Loison, J.L.; Versini, G.; Huber, F.; Pourroy, G.; Verbeeck, J.; Van Tendeloo, G. |
Title |
Oxidation processes at the metal/oxide interface in CoFe2/CoFe2O4 bilayers deposited by pulsed laser deposition |
Type |
A1 Journal article |
Year |
2006 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
54 |
Issue |
1 |
Pages |
191-196 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
CoFe2/CoFe2O4 bilayers were made by pulsed laser ablation of a CoFe2 target on Si(I 0 0) substrates. The metallic layer was deposited first, in vacuum. The oxide was then deposited in an oxidizing O-2:N-2 (20:80) atmosphere. Two different procedures were used for the introduction of the oxidizing atmosphere in the deposition chamber: the laser ablation of the target was either stopped (discontinuous deposition process) or maintained (continuous deposition process) during the 20 min necessary for the establishment of the desired O-2:N-2 pressure. In both cases, the different electronegativities of Fe and Co cause an important modification of the Fe/Co ratio at the metal/oxide interface, with a depletion of Fe in the metal region and of Co in the oxide region. In the continuous procedure, the combination of the kinetic energy given by the ablation process to the Fe and Co adatoms with the one they get from their different affinity towards oxidation allows the formation of a low roughness metal/oxide interface with a high (111) preferred orientation of the CoFe2O4 layer, an induced re-crystallisation of the metal layer underneath and an unusual antiferromagnetic metal/oxide magnetic coupling. (c) 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000233784500021 |
Publication Date |
2005-10-15 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
5 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 5.301; 2006 IF: 3.549 |
Call Number |
UA @ lucian @ c:irua:56043UA @ admin @ c:irua:56043 |
Serial |
2540 |
Permanent link to this record |
|
|
|
Author |
Cao, S.; Pourbabak, S.; Schryvers, D. |
Title |
Quantitative 3-D morphologic and distributional study of Ni4Ti3 precipitates in a Ni51Ti49 single crystal alloy |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Scripta materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
66 |
Issue |
9 |
Pages |
650-653 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
The size, shape and distribution of Ni4Ti3 precipitates in Ni51Ti49 single crystals annealed under stress-free and 〈1 1 1〉B2 compressive conditions are studied via focused ion beam/scanning electron microscopy slice-and-view. The precipitates in the stress-free material grow in autocatalytic pockets with larger size, lower number density, flatter shape and larger inter-particle distance than in the compressed material. Nevertheless, a new quantification method called water penetration reveals that, due to the precipitate alignment, martensite can grow more easily in the compressed material perpendicular to the compression direction. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000302425100010 |
Publication Date |
2012-01-30 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
8 |
Open Access |
|
Notes |
Fwo |
Approved |
Most recent IF: 3.747; 2012 IF: 2.821 |
Call Number |
UA @ lucian @ c:irua:97387 |
Serial |
2743 |
Permanent link to this record |
|
|
|
Author |
Tirry, W.; Schryvers, D. |
Title |
Quantitative determination of strain fields around Ni4Ti3 precipitates in NiTi |
Type |
A1 Journal article |
Year |
2005 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
53 |
Issue |
4 |
Pages |
1041-1049 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000226774500014 |
Publication Date |
2004-12-14 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
97 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 5.301; 2005 IF: 3.430 |
Call Number |
UA @ lucian @ c:irua:55686 |
Serial |
2750 |
Permanent link to this record |
|
|
|
Author |
Cao, S.; Nishida, M.; Schryvers, D. |
Title |
Quantitative three-dimensional analysis of Ni4Ti3 precipitate morphology and distribution in polycrystalline Ni-Ti |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
59 |
Issue |
4 |
Pages |
1780-1789 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
The three-dimensional size, morphology and distribution of Ni4Ti3 precipitates in a Ni50.8Ti49.2 polycrystalline shape memory alloy with a heterogeneous microstructure have been investigated using a focused ion beam/scanning electron microscopy slice-and-view procedure. The mean volume, central plane diameter, thickness, aspect ratio and sphericity of the precipitates in the grain interior as well as near to the grain boundary were measured and/or calculated. The morphology of the precipitates was quantified by determining the equivalent ellipsoids with the same moments of inertia and classified according to the Zingg scheme. Also, the pair distribution functions describing the three-dimensional distributions were obtained from the coordinates of the precipitate mass centres. Based on this new data it is suggested that the existence of the heterogeneous microstructure could be due to a very small concentration gradient in the grains of the homogenized material and that the resulting multistage martensitic transformation originates in strain effects related to the size of the precipitates and scale differences of the available B2 matrix in between the precipitates. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000287265100045 |
Publication Date |
2010-12-20 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
34 |
Open Access |
|
Notes |
Fwo |
Approved |
Most recent IF: 5.301; 2011 IF: 3.755 |
Call Number |
UA @ lucian @ c:irua:85533 |
Serial |
2766 |
Permanent link to this record |
|
|
|
Author |
Wang, X.; Li, K.; Schryvers, D.; Verlinden, B.; Van Humbeeck, J. |
Title |
R-phase transition and related mechanical properties controlled by low-temperature aging treatment in a Ti50.8 at.% Ni thin wire |
Type |
A1 Journal article |
Year |
2014 |
Publication |
Scripta materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
72-73 |
Issue |
|
Pages |
21-24 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
A cold-drawn Ti50.8 at.% Ni wire was annealed at 600 °C for 30 min, followed by aging at 250 °C for different times. A microstructure with small grains and nanoscaled precipitates was obtained. The thermally induced martensite transformation is suppressed in the samples aged for 4 h or longer, leaving a one-stage R-phase transition between −150 and +150 °C. The transformation behavior, work output and recovery stress associated with the R-phase transition are presented. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000329148500006 |
Publication Date |
2013-10-17 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
27 |
Open Access |
|
Notes |
Fwo |
Approved |
Most recent IF: 3.747; 2014 IF: 3.224 |
Call Number |
UA @ lucian @ c:irua:111847 |
Serial |
2806 |
Permanent link to this record |
|
|
|
Author |
Shi, H.; Frenzel, J.; Martinez, G.T.; Van Rompaey, S.; Bakulin, A.; Kulkova, A.; Van Aert, S.; Schryvers, D. |
Title |
Site occupation of Nb atoms in ternary Ni-Ti-Nb shape memory alloys |
Type |
A1 Journal article |
Year |
2014 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
74 |
Issue |
|
Pages |
85-95 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
Nb occupancy in the austenite B2-NiTi matrix and Ti2Ni phase in NiTiNb shape memory alloys was investigated by aberration-corrected scanning transmission electron microscopy and precession electron diffraction. In both cases, Nb atoms were found to prefer to occupy the Ti rather than Ni sites. A projector augmented wave method within density functional theory was used to calculate the atomic and electronic structures of the austenitic B2-NiTi matrix phase and the Ti2Ni precipitates both with and without addition of Nb. The obtained formation energies and analysis of structural and electronic characteristics explain the preference for Ti sites for Nb over Ni sites. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000338621400009 |
Publication Date |
2014-05-08 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
21 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 5.301; 2014 IF: 4.465 |
Call Number |
UA @ lucian @ c:irua:118334 |
Serial |
3028 |
Permanent link to this record |
|
|
|
Author |
Fang, C.M.; van Huis, M.A.; Zandbergen, H.W. |
Title |
Stability and structures of the \epsilon-phases of iron nitrides and iron carbides from first principles |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Scripta materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
64 |
Issue |
3 |
Pages |
296-299 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
First-principles calculations were performed for the ε-phases and other iron carbides/nitrides with hexagonal close-packed Fe sublattices. Although these nitrides/carbides have similar crystal structures, they exhibit different chemical and physical properties. Relative to α-Fe, graphite and N2, all the ε-type nitrides are stable, while all the carbides are metastable. The lattice parameters of the ε-iron nitrides vary differently from those of the ε-carbides, as a function of the concentration of X (Xdouble bond; length as m-dashN, C). The structural relationships of ε-Fe2X with η-Fe2X and ζ-Fe2X are discussed. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000285323300022 |
Publication Date |
2010-09-02 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
29 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.747; 2011 IF: 2.699 |
Call Number |
UA @ lucian @ c:irua:86974 |
Serial |
3120 |
Permanent link to this record |
|
|
|
Author |
Tian, H.; Schryvers, D.; Liu, D.; Jiang, Q.; van Humbeeck, J. |
Title |
Stability of Ni in nitinol oxide surfaces |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Acta biomaterialia |
Abbreviated Journal |
Acta Biomater |
Volume |
7 |
Issue |
2 |
Pages |
892-899 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
The stability of Ni in titanium oxide surface layers on nitinol wires known to release certain amounts of Ni was investigated by first principles density functional theory and transmission electron microscopy. The oxides were identified as a combination of TiO and TiO2 depending on the thickness of the layer. The calculations indicate that free Ni atoms can exist in TiO at ambient temperature while Ni particles form in TiO2, which was confirmed by the transmission electron microscopy observations. The results are discussed with respect to surface stability and Ni release due to free Ni atoms and Ni particles. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
S.l. |
Editor |
|
Language |
|
Wos |
000286707700047 |
Publication Date |
2010-09-17 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1742-7061; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
6.319 |
Times cited |
39 |
Open Access |
|
Notes |
Fwo |
Approved |
Most recent IF: 6.319; 2011 IF: 4.865 |
Call Number |
UA @ lucian @ c:irua:85998 |
Serial |
3128 |
Permanent link to this record |
|
|
|
Author |
Tzedaki, G.; M.; Turner, S.; Godet, S.; De Graeve, I.; Kernig, B.; Hasenclever, J.; Terryn, H. |
Title |
Structure and formation mechanism of rolled-in oxide areas on aluminum lithographic printing sheets |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Scripta materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
68 |
Issue |
5 |
Pages |
233-236 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
The subsurface area introduced during rolling on the 1100 aluminum alloy series alters its surface properties, which makes it more susceptible to corrosion. A combination of different transmission electron microscopy techniques is employed to observe the orientation of small grain structures and the distribution elements in the subsurface layer. This approach provided valuable insight into the formation mechanism of the layer and the phenomena taking place during rolling. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000314012000003 |
Publication Date |
2012-10-23 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
6 |
Open Access |
|
Notes |
Fwo |
Approved |
Most recent IF: 3.747; 2013 IF: 2.968 |
Call Number |
UA @ lucian @ c:irua:105288 |
Serial |
3277 |
Permanent link to this record |
|
|
|
Author |
Fang, C.M.; van Huis, M.A.; Zandbergen, H.W. |
Title |
Structure and stability of Fe2 phases from density-functional theory calculations |
Type |
A1 Journal article |
Year |
2010 |
Publication |
Scripta materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
63 |
Issue |
4 |
Pages |
418-421 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
Fe(2)C plays a crucial role in the precipitation of iron carbides. Jack's structural models for epsilon-Fe(2)C, and non-stoichiometric epsilon-Fe(2.4)C, are analyzed using first-principles calculations. Several new configurations of epsilon-Fe(2)C with even higher stability are found. We show how epsilon-Fe(2)C transforms into eta-Fe(2)C, and address the structural relationships with the chi-Fe(5)C(2), theta-Fe(3)C and Fe(7)C(3) phases. The relative occurrence of these phases in steel, as well as their probable evolution during tempering of quenched steels, is discussed. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000279496000017 |
Publication Date |
2010-05-03 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
32 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.747; 2010 IF: 2.820 |
Call Number |
UA @ lucian @ c:irua:95591 |
Serial |
3299 |
Permanent link to this record |
|
|
|
Author |
Seo, J.W.; Schryvers, D. |
Title |
TEM investigation of the microstructure and defects of CuZr martensite: 1: morphology and twin systems |
Type |
A1 Journal article |
Year |
1998 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
46 |
Issue |
|
Pages |
1165-1175 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000072289100009 |
Publication Date |
2002-07-25 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
46 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 5.301; 1998 IF: 1.834 |
Call Number |
UA @ lucian @ c:irua:48360 |
Serial |
3479 |
Permanent link to this record |
|
|
|
Author |
Seo, J.W.; Schryvers, D. |
Title |
TEM investigation of the microstructure and defects of CuZr martensite: 2: planar defects |
Type |
A1 Journal article |
Year |
1998 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
46 |
Issue |
|
Pages |
1177-1183 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000072289100010 |
Publication Date |
2002-07-25 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
21 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 5.301; 1998 IF: 1.834 |
Call Number |
UA @ lucian @ c:irua:48361 |
Serial |
3480 |
Permanent link to this record |
|
|
|
Author |
Wang, B.; Idrissi, H.; Shi, H.; Colla, M.S.; Michotte, S.; Raskin, J.P.; Pardoen, T.; Schryvers, D. |
Title |
Texture-dependent twin formation in nanocrystalline thin Pd films |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Scripta materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
66 |
Issue |
11 |
Pages |
866-871 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
Nanocrystalline Pd films were produced by electron-beam evaporation and sputter deposition. The electron-beam-evaporated films reveal randomly oriented nanograins with a relatively high density of growth twins, unexpected in view of the high stacking fault energy of Pd. In contrast, sputter-deposited films show a clear 〈1 1 1〉 crystallographic textured nanostructure without twins. These results provide insightful information to guide the generation of microstructures with enhanced strength/ductility balance in high stacking fault energy nanocrystalline metallic thin films. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000303621900007 |
Publication Date |
2012-01-31 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
19 |
Open Access |
|
Notes |
Iap; Fwo |
Approved |
Most recent IF: 3.747; 2012 IF: 2.821 |
Call Number |
UA @ lucian @ c:irua:96955 |
Serial |
3566 |
Permanent link to this record |
|
|
|
Author |
Delville, R.; Schryvers, D.; Zhang, Z.; James, R.D. |
Title |
Transmission electron microscopy investigation of microstructures in low-hysteresis alloys with special lattice parameters |
Type |
A1 Journal article |
Year |
2009 |
Publication |
Scripta materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
60 |
Issue |
5 |
Pages |
293-296 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
A sharp drop in hysteresis is observed for shape memory alloys satisfying the compatibility condition between austenite and martensite, i.e. ë2 = 1, where ë2 is the middle eigenvalue of the transformation strain matrix. The present work investigates the evolution of microstructure by transmission electron microscopy as the composition of the Ti50Ni50−xPdx system is systemically tuned to achieve the condition ë2 = 1. Changes in morphology, twinning density and twinning modes are reported along with twinless martensite and exact austenitemartensite interfaces. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000262553300007 |
Publication Date |
2008-11-08 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
56 |
Open Access |
|
Notes |
Multimat |
Approved |
Most recent IF: 3.747; 2009 IF: 2.949 |
Call Number |
UA @ lucian @ c:irua:76017 |
Serial |
3710 |
Permanent link to this record |
|
|
|
Author |
Schryvers, D.; Firstov, G.S.; Seo, J.W.; van Humbeeck, J.; Koval, Y.N. |
Title |
Unit cell determination in CuZr martensite by EM and X-ray diffraction |
Type |
A1 Journal article |
Year |
1997 |
Publication |
Scripta materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
36 |
Issue |
|
Pages |
1119-1125 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
A1997WV99600007 |
Publication Date |
0000-00-00 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
76 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.747; 1997 IF: 0.645 |
Call Number |
UA @ lucian @ c:irua:21344 |
Serial |
3811 |
Permanent link to this record |
|
|
|
Author |
Chen, X.; Cao, S.; Ikeda, T.; Srivastava, V.; Snyder, G.J.; Schryvers, D.; James, R.D. |
Title |
A weak compatibility condition for precipitation with application to the microstructure of PbTe-Sb2Te3 thermoelectrics |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
59 |
Issue |
15 |
Pages |
6124-6132 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
We propose a weak condition of compatibility between phases applicable to cases exhibiting full or partial coherence and Widmanstätten microstructure. The condition is applied to the study of Sb2Te3 precipitates in a PbTe matrix in a thermoelectric alloy. The weak condition of compatibility predicts elongated precipitates lying on a cone determined by a transformation stretch tensor. Comparison of this cone with the long directions of precipitates determined by a slice-and-view method of scanning electron microscopy combined with focused ion beam sectioning shows good agreement between theory and experiment. A further study of the morphology of precipitates by the Eshelby method suggests that interfacial energy also plays a role and gives an approximate value of interfacial energy per unit area of 250 dyn cm−1. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000294086900026 |
Publication Date |
2011-07-22 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
8 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 5.301; 2011 IF: 3.755 |
Call Number |
UA @ lucian @ c:irua:92388 |
Serial |
3911 |
Permanent link to this record |
|
|
|
Author |
Lemoine, G.; Delannay, L.; Idrissi, H.; Colla, M.-S.; Pardoen, T. |
Title |
Dislocation and back stress dominated viscoplasticity in freestanding sub-micron Pd films |
Type |
A1 Journal article |
Year |
2016 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
111 |
Issue |
111 |
Pages |
10-21 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
A dislocation-based crystal plasticity model is developed in order to study the mechanical and creep/ relaxation behaviour of polycrystalline metallic thin films. The model accounts for the confinement of plasticity due to grain boundaries and for the anisotropy of individual grains, as well as for the significant viscoplastic effects associated to dislocation dominated thermally activated mechanisms. Numerical predictions are assessed based on experimental tensile test followed by relaxation on freestanding Pd films, based on an on-chip test technique. The dislocation-based mechanism assumption captures all the experimental trends, including the stress strain response, the relaxation behaviour and the dislocation density evolution, confirming the dominance of a dislocation driven deformation mechanism for the present Pd films with high defects density. The model has also been used to address some original experimental evidences involving back stresses, Bauschinger effect, backward creep and strain recovery. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000375812100002 |
Publication Date |
2016-03-26 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
6 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 5.301 |
Call Number |
UA @ lucian @ c:irua:133636 |
Serial |
4162 |
Permanent link to this record |
|
|
|
Author |
Hoang, D.-Q.; Korneychuk, S.; Sankaran, K.J.; Pobedinskas, P.; Drijkoningen, S.; Turner, S.; Van Bael, M.K.; Verbeeck, J.; Nicley, S.S.; Haenen, K. |
Title |
Direct nucleation of hexagonal boron nitride on diamond : crystalline properties of hBN nanowalls |
Type |
A1 Journal article |
Year |
2017 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
127 |
Issue |
|
Pages |
17-24 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
Hexagonal boron nitride (hBN) nanowalls were deposited by unbalanced radio frequency sputtering on (100)-oriented silicon, nanocrystalline diamond films, and amorphous silicon nitride (Si3N4) membranes. The hBN nanowall structures were found to grow vertically with respect to the surface of all of the substrates. To provide further insight into the nucleation phase and possible lattice distortion of the deposited films, the structural properties of the different interfaces were characterized by transmission electron microscopy. For Si and Si3N4 substrates, turbostratic and amorphous BN phases form a clear transition zone between the substrate and the actual hBN phase of the bulk nanowalls. However, surprisingly, the presence of these phases was suppressed at the interface with a nanocrystalline diamond film, leading to a direct coupling of hBN with the diamond surface, independent of the vertical orientation of the diamond grain. To explain these observations, a growth mechanism is proposed in which the hydrogen terminated surface of the nanocrystalline diamond film leads to a rapid formation of the hBN phase during the initial stages of growth, contrary to the case of Si and Si3N4 substrates. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
|
Publication Date |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; ; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
|
Open Access |
OpenAccess |
Notes |
|
Approved |
Most recent IF: 5.301 |
Call Number |
UA @ lucian @ c:irua:142398 |
Serial |
4645 |
Permanent link to this record |
|
|
|
Author |
Charalampopoulou, E.; Cautaerts, N.; Van der Donck, T.; Schryvers, D.; Lambrinou, K.; Delville, R. |
Title |
Orientation relationship of the austenite-to-ferrite transformation in austenitic stainless steels due to dissolution corrosion in contact with liquid Pb-Bi eutectic |
Type |
A1 Journal article |
Year |
2019 |
Publication |
Scripta materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
167 |
Issue |
167 |
Pages |
66-70 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
The orientation relationship of an austenite-to-ferrite phase transformation in 316L stainless steels induced by the loss of austenite stabilizers resulting from the steel dissolution corrosion in liquid Pb-Bi eutectic was studied by means of electron backscatter diffraction. The misorientations at the austenite/ferrite interface were compared to the prevailing orientation relationship models in steels. The Pitsch orientation relationship model was found to be predominant, which is unusual for austenite-to-ferrite bulk transformations in steels. The nature of this particular transformation, which involves loss of steel alloying elements and the presence of an interfacial liquid metal layer, is discussed to explain this finding. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000468720000014 |
Publication Date |
2019-04-06 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
3 |
Open Access |
Not_Open_Access |
Notes |
; The authors would like to thank J. Joris (SCK center dot CEN) for technical support during corrosion testing, J. Lim (SCK center dot CEN) for the manufacture and calibration of the oxygen sensors used in this work and W. Van Renterghem (SCK center dot CEN) for his valuable help with the EBSD measurements. The steel suppliers were: Industeel, ArcelorMittal Group, for the 316L-SA plate, and Panchmahal Steel Ltd., India, for the 316L-CWrod. The authors gratefully acknowledge the financial support provided within the framework of the ongoing development of the MYRRHA irradiation facility. The research leading to these results falls within the framework of the European Energy Research Alliance Joint Programme on Nuclear Materials (EERA JPNM). ; |
Approved |
Most recent IF: 3.747 |
Call Number |
UA @ admin @ c:irua:160228 |
Serial |
5257 |
Permanent link to this record |
|
|
|
Author |
Zhang, Z.; Rosalie, J.M.; Medhekar, N.V.; Bourgeois, L. |
Title |
Resolving the FCC/HCP interfaces of the \gamma'(Ag2Al) precipitate phase in aluminium |
Type |
A1 Journal article |
Year |
2019 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
174 |
Issue |
174 |
Pages |
116-130 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
The gamma'(Ag2Al) phase in the Al-Ag alloy system has served as a textbook example for understanding phase transformations, precipitating hexagonal close-packed (HCP) crystals in the face-centred cubic (FCC) aluminium matrix. The gamma' precipitates display fully coherent interfaces at their broad facets and semicoherent interfaces at their edges. Shockley partial dislocations are expected to decorate the semicoherent interface due to the FCC-HCP structural transformation. Determining the exact locations and core structures of interfacial dislocations, however, remains challenging. In this study, we used aberration-corrected scanning transmission electron microscopy and atomistic simulations to re-visit this classical system. We characterised and explained the Ag segregation at coherent interfaces in the early stage of precipitation. For semicoherent interfaces, interfacial dislocations and reconstructions were revealed by bridging advanced microstructure characterisation and atomistic simulations. In particular, we discovered a new FCC/HCP interfacial structure that displays a unique combination of Shockley partial, Lomer-Cottrell and Hirth dislocations that evolve from the known interfacial structure purely composed by Shockley partial dislocations. Our findings show that the FCC-HCP transformation is more complex than hitherto considered, due to the interplay between structure and composition confined at interfaces. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000474501300011 |
Publication Date |
2019-05-18 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
3 |
Open Access |
|
Notes |
; The authors acknowledge funding from the Australian Research Council (LE0454166, LE110100223), the Victorian State Government and Monash University for instrumentation, and use of the facilities within the Monash Centre for Electron Microscopy. LB and NM acknowledge the financial support of the Australian Research Council (DP150100558). The authors also gratefully acknowledge the computational support from Monash Advanced Research Computing Hybrid, the National Computational Infrastructure and Pawsey Supercomputing Centre. ZZ is thankful to Monash University for a Monash Graduate Scholarship, a Monash International Postgraduate Research Scholarship and a Monash Centre for Electron Microscopy Postgraduate Scholarship. ZZ is indebted to Matthew Weyland for his training in aberration-corrected electron microscopy, Scott Findlay for his help on image simulations, Xiang Gao for alloy casting and Ian Polmear for discussions. ; |
Approved |
Most recent IF: 5.301 |
Call Number |
UA @ admin @ c:irua:161192 |
Serial |
5395 |
Permanent link to this record |
|
|
|
Author |
Weng, Y.; Ding, L.; Zhang, Z.; Jia, Z.; Wen, B.; Liu, Y.; Muraishi, S.; Li, Y.; Liu, Q. |
Title |
Effect of Ag addition on the precipitation evolution and interfacial segregation for Al-Mg-Si alloy |
Type |
A1 Journal article |
Year |
2019 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
Volume |
180 |
Issue |
180 |
Pages |
301-316 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
The effect of Ag addition on the precipitation evolution and interfacial segregation for Al-Mg-Si alloys was systematically investigated by atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), atom probe tomography (APT) and density functional theory (DFT) calculation. At the early aging stage, Ag atoms could enter clusters and refine the distribution of these clusters. Then, Ag atoms preferentially segregate at the GP zone/alpha-Al and beta ''/alpha-Al interfaces at the peak aging stage by the replacement of Al atoms in FCC matrix. With prolonging aging time, Ag atoms generally incorporate into the interior of beta '' precipitate, facilitating the formation of QP lattice (a hexagonal network of Si atomic columns) and the local symmetry substructures, Ag sub-unit (1) and Ag sub-unit (2). At the over-aged stage, the Ag sub-unit (1) and Ag sub-unit (2) could transform to the beta'(Ag) (i.e. beta'(Ag1) and beta'(Ag2).) and Q'(Ag) unit cells, respectively. All the precipitates at the over-aging stage have a composite and disordered structure due to the coexistence of different unit cells (beta'(Ag1), beta'(Ag2), Q'(Ag) and beta') and the non-periodic arrangement of Ag atoms within the precipitate. In the equilibrium stage, the incorporated Ag atoms in the precipitates release into the alpha-Al matrix as solute atoms or form Ag particles. In general, Ag atoms undergo a process of “segregate at the precipitate/matrix interface -> incorporate into the interior of precipitate -> release into the alpha-Al matrix” during the precipitation for Al-Mg-Si-Ag alloys. Besides, Ag segregation is found at the interfaces of almost all metastable phases (including GP zone, beta '', beta'/beta'(Ag) phase) in Al-Mg-Si-Ag alloys. The Ag segregation at the beta'/alpha-Al interface could increase the length/diameter ratio of beta' phase and thus promote the additional strengthening potential of these alloys. These findings provide a new route for precipitation hardening by promoting the nucleation and morphology evolution of precipitates. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000495519100028 |
Publication Date |
2019-09-12 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
5.301 |
Times cited |
|
Open Access |
|
Notes |
|
Approved |
Most recent IF: 5.301 |
Call Number |
UA @ admin @ c:irua:164641 |
Serial |
6295 |
Permanent link to this record |
|
|
|
Author |
Cautaerts, N.; Delville, R.; Stergar, E.; Pakarinen, J.; Verwerft, M.; Yang, Y.; Hofer, C.; Schnitzer, R.; Lamm, S.; Felfer, P.; Schryvers, D. |
Title |
The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study |
Type |
A1 Journal article |
Year |
2020 |
Publication |
Acta Materialia |
Abbreviated Journal |
Acta Mater |
Volume |
197 |
Issue |
|
Pages |
184-197 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
This work encompasses an in-depth transmission electron microscopy and atom probe tomography study of Ti-stabilized austenitic steel irradiated with Fe-ions. The focus is on radiation induced segregation and precipitation, and in particular on how Ti and TiC affect these processes. A 15-15Ti steel (grade: DIN 1.4970) in two thermo-mechanical states (cold-worked and aged) was irradiated at different temperatures up to a dose of 40 dpa. At low irradiation temperatures, the cold-worked and aged materials evolved to a similar microstructure dominated by small Si and Ni clusters, corresponding to segregation to small point defect clusters. TiC precipitates, initially present in the aged material, were found to be unstable under these irradiation conditions. Elevated irradiation temperatures resulted in the nucleation of nanometer sized Cr enriched TiC precipitates surrounded by Si and Ni enriched shells. In addition, nanometer sized Ti- and Mn-enriched G-phase (M6Ni16Si7) precipitates formed, often attached to TiC precipitates. Post irradiation, larger number densities of TiC were observed in the cold-worked material compared to the aged material. This was correlated with a lower volume fraction of G-phase. The findings suggest that at elevated irradiation temperatures, the precipitate-matrix interface is an important point defect sink and contributes to the improved radiation resistance of this material. The study is a first of its kind on stabilized steel and demonstrates the significance of the small Ti addition to the evolution of the microstructure under irradiation. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000564767000001 |
Publication Date |
2020-07-10 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
9.4 |
Times cited |
|
Open Access |
Not_Open_Access |
Notes |
; This work was supported by ENGIE [contract number 2015-AC-007 e BSUEZ6900]; the U.S. Department of Energy, Office of Nuclear Energy under DOE Idaho Operations Office Contract DE-AC07051D14517 as part of a Nuclear Science User Facilities experiment; and by the MYRRHA program at SCK-CEN, Belgium. Funding of the Austrian BMK (846933) in the framework of the program “Production of the future” and the “BMK Professorship for Industry” is gratefully acknowledged. We want to thank the staffat MIBL for assisting with the ion irradiations as well as the staffat CAES for assisting with FIB work and conducting APT measurements. ; |
Approved |
Most recent IF: 9.4; 2020 IF: 5.301 |
Call Number |
UA @ admin @ c:irua:171956 |
Serial |
6626 |
Permanent link to this record |
|
|
|
Author |
Wang, X.; Yao, X.; Schryvers, D.; Verlinden, B.; Wang, G.; Zhao, G.; Van Humbeeck, J.; Kustov, S. |
Title |
Anomalous stress-strain behavior of NiTi shape memory alloy close to the border of superelastic window |
Type |
A1 Journal article |
Year |
2021 |
Publication |
Scripta Materialia |
Abbreviated Journal |
Scripta Mater |
Volume |
204 |
Issue |
|
Pages |
114135 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
In this work, we report an anomalous phenomenon on superelastic cycling of NiTi shape memory alloys when deforming at the temperature close to the border of superelastic window. New unexpected effects are found-(i) critical stress for inducing martensite transformation during the second loading cycle is higher than that of the first cycle; ( ii ) the plateau stress of the second cycle decreases to the original level when the strain overcomes the limit of the first cycle; ( iii ) transition from good superelasticity in the first cycle to fully irreversible strain in the second. We propose that defects generated during the first superelastic cycle close to the border of superelastic window impede following stress-induced martensitic transformations, leading to the increase of critical stress beyond yield stress of the B2 matrix, and thus functional fatigue of NiTi alloys. (c) 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
Address ![sorted by Address field, descending order (down)](img/sort_desc.gif) |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000690441400007 |
Publication Date |
2021-07-14 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1359-6462 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.747 |
Times cited |
|
Open Access |
OpenAccess |
Notes |
|
Approved |
Most recent IF: 3.747 |
Call Number |
UA @ admin @ c:irua:181658 |
Serial |
6853 |
Permanent link to this record |