| Home | [101–200] << 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 >> |
|
| Records | |||||
|---|---|---|---|---|---|
| Author | van den Broek, B.; Houssa, M.; Scalise, E.; Pourtois, G.; Afanas'ev, V.V.; Stesmans, A. | ||||
| Title | First-principles electronic functionalization of silicene and germanene by adatom chemisorption | Type | A1 Journal article | ||
| Year | 2014 | Publication | Applied surface science | Abbreviated Journal | Appl Surf Sci |
| Volume | 291 | Issue | Pages | 104-108 | |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract  |
This study presents first-principles results on the electronic functionalization of silicene and germanene monolayers by means of chemisorption of adatom species H, Li, F, Sc, Ti, V. Three general adatom-monolayer configurations are considered, each having its distinct effect on the electronic structure, yielding metallic or semiconducting dispersions depending on the adatom species and configuration. The induced bandgap is a (in)direct F gap ranging from 0.2 to 2.3 eV for both silicene and germanene. In general the alternating configuration was found to be the most energetically stable. The boatlike and chairlike conformers are degenerate with the former having anisotropic effective carrier masses. The top configuration leads to the planar monolayer and predominately to a gapped dispersion. The hollow configuration with V adatoms retains the Dirac cone, but with strong orbital planar hybridization at the Fermi level. We also observe a planar surface state the Fermi level for the latter systems. (C) 2013 Elsevier B.V. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Amsterdam | Editor | ||
| Language | Wos | 000329327700023 | Publication Date | 2013-09-17 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0169-4332; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.387 | Times cited | 32 | Open Access | |
| Notes | Approved | Most recent IF: 3.387; 2014 IF: 2.711 | |||
| Call Number | UA @ lucian @ c:irua:113766 | Serial | 1208 | ||
| Permanent link to this record | |||||
| Author | Wang, J.; Zhang, K.; Mertens, M.; Bogaerts, A.; Meynen, V. | ||||
| Title | Plasma-based dry reforming of methane in a dielectric barrier discharge reactor: Importance of uniform (sub)micron packings/catalysts to enhance the performance | Type | A1 Journal Article | ||
| Year | 2023 | Publication | APPLIED CATALYSIS B-ENVIRONMENTAL | Abbreviated Journal | |
| Volume | 337 | Issue | Pages | 122977 | |
| Keywords | A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract |
This study presents new insights on the effect of (sub)micrometer particle sized materials in plasma-based CO2- CH4 reforming by investigating the performance of SiO2 spheres (with/without supported metal) of varying particle sizes. (Sub)micron particles synthesized through the St¨ober method were used instead of (sub)millimeter particles employed in previous studies. Increasing particle size (from 120 nm to 2390 nm) was found to first increase and then decrease conversion and energy yield, with optimal performance achieved using 740 nm 5 wt% Ni loaded SiO2, which improved CO2 and CH4 conversion, and energy yield to 44%, 55%, and 0.271 mmol/kJ, respectively, compared to 20%, 27%, and 0.116 mmol/kJ in an empty reactor at the same flow rate. This is the first to achieve significant performance improvement in a fully packed reactor, highlighting the importance of selecting a suitable particle size. The findings can offer guidance towards rational design of catalysts for plasmabased reactions. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001056527600001 | Publication Date | 2023-06-09 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0926-3373 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 22.1 | Times cited | Open Access | Not_Open_Access | |
| Notes | This work is supported by the China Scholarship Council (No. 201806060123); and the VLAIO Catalisti transition project CO2PERATE (HBC.2017.0692). K.Z acknowledges the EASiCHEM project funded by the Flemish Strategic Basic Research Program of the Catalisti cluster and Flanders Innovation & Entrepreneurship (HBC.2018.0484). | Approved | Most recent IF: 22.1; 2023 IF: 9.446 | ||
| Call Number | PLASMANT @ plasmant @c:irua:196955 | Serial | 8797 | ||
| Permanent link to this record | |||||
| Author | Wang, J.; Zhang, K.; Mertens, M.; Bogaerts, A.; Meynen, V. | ||||
| Title | Plasma-based dry reforming of methane in a dielectric barrier discharge reactor: Importance of uniform (sub)micron packings/catalysts to enhance the performance | Type | A1 Journal Article | ||
| Year | 2023 | Publication | APPLIED CATALYSIS B-ENVIRONMENTAL | Abbreviated Journal | |
| Volume | 337 | Issue | Pages | 122977 | |
| Keywords | A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract |
This study presents new insights on the effect of (sub)micrometer particle sized materials in plasma-based CO2- CH4 reforming by investigating the performance of SiO2 spheres (with/without supported metal) of varying particle sizes. (Sub)micron particles synthesized through the St¨ober method were used instead of (sub)millimeter particles employed in previous studies. Increasing particle size (from 120 nm to 2390 nm) was found to first increase and then decrease conversion and energy yield, with optimal performance achieved using 740 nm 5 wt% Ni loaded SiO2, which improved CO2 and CH4 conversion, and energy yield to 44%, 55%, and 0.271 mmol/kJ, respectively, compared to 20%, 27%, and 0.116 mmol/kJ in an empty reactor at the same flow rate. This is the first to achieve significant performance improvement in a fully packed reactor, highlighting the importance of selecting a suitable particle size. The findings can offer guidance towards rational design of catalysts for plasmabased reactions. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001056527600001 | Publication Date | 2023-06-09 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0926-3373 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 22.1 | Times cited | Open Access | Not_Open_Access | |
| Notes | This work is supported by the China Scholarship Council (No. 201806060123); and the VLAIO Catalisti transition project CO2PERATE (HBC.2017.0692). K.Z acknowledges the EASiCHEM project funded by the Flemish Strategic Basic Research Program of the Catalisti cluster and Flanders Innovation & Entrepreneurship (HBC.2018.0484). | Approved | Most recent IF: 22.1; 2023 IF: 9.446 | ||
| Call Number | PLASMANT @ plasmant @c:irua:196955 | Serial | 8798 | ||
| Permanent link to this record | |||||
| Author | Wagaarachchige, J.; Idris, Z.; Kummamuru, N.B.; Sætre, K.A.; Halstensen, M.; Jens, K.-J. | ||||
| Title | A new sulfolane based solvent for CO₂ capture | Type | P1 Proceeding | ||
| Year | 2021 | Publication | SSRN electronic journal | Abbreviated Journal | |
| Volume | Issue | Pages | |||
| Keywords | P1 Proceeding; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) | ||||
| Abstract |
This study presents novel sulfolane based non-aqueous CO2 capture solvents, as an alternative solution for capturing CO2 from industrial processes. In order to select the most promising amine system, five different amines were tested by monitoring CO2 absorption and desorption processes using the time-base Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy. During absorption experiments, we observed the formation of Monomethyl Carbonate (MMC) in diisopropylamine (DIPA) and 2-amino-2-methyl-1-propanol (AMP) systems, while carbamate was observed as the main product for the other three amine systems tested. In regeneration experiments, the MMC could be desorbed relatively easily from the amine solution at a mild temperature. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2021-04-17 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | ISBN | Additional Links | UA library record | ||
| Impact Factor | Times cited | Open Access | OpenAccess | ||
| Notes | Approved | Most recent IF: NA | |||
| Call Number | UA @ admin @ c:irua:180364 | Serial | 8305 | ||
| Permanent link to this record | |||||
| Author | Khosravian, N.; Kamaraj, B.; Neyts, E.C.; Bogaerts, A. | ||||
| Title | Structural modification of P-glycoprotein induced by OH radicals: Insights from atomistic simulations | Type | A1 Journal article | ||
| Year | 2016 | Publication | Scientific reports | Abbreviated Journal | Sci Rep-Uk |
| Volume | 6 | Issue | 6 | Pages | 19466 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract |
This study reports on the possible effects of OH radical impact on the transmembrane domain 6 of P-glycoprotein, TM6, which plays a crucial role in drug binding in human cells. For the first time, we employ molecular dynamics (MD) simulations based on the self-consistent charge density functional tight binding (SCC-DFTB) method to elucidate the potential sites of fragmentation and mutation in this domain upon impact of OH radicals, and to obtain fundamental information about the underlying reaction mechanisms. Furthermore, we apply non-reactive MD simulations to investigate the long-term effect of this mutation, with possible implications for drug binding. Our simulations indicate that the interaction of OH radicals with TM6 might lead to the breaking of C-C and C-N peptide bonds, which eventually cause fragmentation of TM6. Moreover, according to our simulations, the OH radicals can yield mutation in the aromatic ring of phenylalanine in TM6, which in turn affects its structure. As TM6 plays an important role in the binding of a range of cytotoxic drugs with P-glycoprotein, any changes in its structure are likely to affect the response of the tumor cell in chemotherapy. This is crucial for cancer therapies based on reactive oxygen species, such as plasma treatment. | ||||
| Address | Research Group PLASMANT, Department of Chemistry, University of Antwerp, Universiteitsplein 1, B-2610 Antwerp, Belgium | ||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | English | Wos | 000369573900001 | Publication Date | 2016-02-09 |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2045-2322 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.259 | Times cited | 7 | Open Access | |
| Notes | The authors acknowledge financial support from the Fund for Scientific Research (FWO) Flanders, grant number G012413N. The calculations were performed in part using the Turing HPC infrastructure of the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI) and the Universiteit Antwerpen.” | Approved | Most recent IF: 4.259 | ||
| Call Number | c:irua:131610 | Serial | 4031 | ||
| Permanent link to this record | |||||
| Author | Tunca, B.; Lapauw, T.; Karakulina, O.M.; Batuk, M.; Cabioc’h, T.; Hadermann, J.; Delville, R.; Lambrinou, K.; Vleugels, J. | ||||
| Title | Synthesis of MAX Phases in the Zr-Ti-Al-C System | Type | A1 Journal article | ||
| Year | 2017 | Publication | Inorganic chemistry | Abbreviated Journal | Inorg Chem |
| Volume | 56 | Issue | 56 | Pages | 3489-3498 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This study reports on the synthesis and characterization of MAX phases in the (Zr,Ti)n+1AlCn system. The MAX phases were synthesized by reactive hot pressing and pressureless sintering in the 1350–1700 °C temperature range. The produced ceramics contained large fractions of 211 and 312 (n = 1, 2) MAX phases, while strong evidence of a 413 (n = 3) stacking was found. Moreover, (Zr,Ti)C, ZrAl2, ZrAl3, and Zr2Al3 were present as secondary phases. In general, the lattice parameters of the hexagonal 211 and 312 phases followed Vegard’s law over the complete Zr-Ti solid solution range, but the 312 phase showed a non-negligible deviation from Vegard’s law around the (Zr0.33,Ti0.67)3Al1.2C1.6 stoichiometry. High-resolution scanning transmission electron microscopy combined with X-ray diffraction demonstrated ordering of the Zr and Ti atoms in the 312 phase, whereby Zr atoms occupied preferentially the central position in the close-packed M6X octahedral layers. The same ordering was also observed in 413 stackings present within the 312 phase. The decomposition of the secondary (Zr,Ti)C phase was attributed to the miscibility gap in the ZrC-TiC system. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000397171100045 | Publication Date | 2017-03-20 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0020-1669 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.857 | Times cited | 26 | Open Access | OpenAccess |
| Notes | Fonds Wetenschappelijk Onderzoek, G.0431.10N.F ; Agentschap voor Innovatie door Wetenschap en Technologie, 131081 ; European Atomic Energy Community, 604862 ; SCK-CEN Academy for Nuclear Science and Technology; Hercules Foundation, Project/Award no: AKUL/1319 Project/Award no: ZW09-09 ; | Approved | Most recent IF: 4.857 | ||
| Call Number | EMAT @ emat @ c:irua:141794 | Serial | 4491 | ||
| Permanent link to this record | |||||
| Author | Jain, R.; Rather, J.A.; Dwivedi, A. | ||||
| Title | Voltammetric behaviour of nitroxazepine in solubilized system and biological fluids | Type | A1 Journal article | ||
| Year | 2011 | Publication | Materials science and engineering: part C: biomimetic materials | Abbreviated Journal | |
| Volume | 31 | Issue | 2 | Pages | 230-237 |
| Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
| Abstract |
This study reports the development and validation of sensitive and selective assay method for the determination of the antidepressant drug in solubilized system and biological fluids. Solubilized system of different surfactants including cationic, anionic and non-ionic influences the electrochemical response of drug. Addition of cationic surfactant cetrimide to the solution containing drug enhances the peak current signal while anionic and non-ionic showed an opposite effect. The current signal due to reduction process was function of concentration of nitroxazepine, pH, type of surfactant and preconcentration time at the electrode surface. The reduction process is irreversible and adsorption controlled at HMDE. Various chemical and instrumental parameters affecting the monitored electroanalytical response were investigated and optimized for niroxazepine hydrochloride determination. The proposed SWCAdSV and DPCAdSV methods are linear over the concentration range 2.0 × 10-7 5.0 × 10-9 mol/L and 6.1 × 10-7 1.0 × 10-8 mol/L with detection limit of 1.62 × 10-10 mo/L and 1.4 × 10-9 mo/L respectively. The method shows good sensitivity, selectivity, accuracy and precision that makes it very suitable for determination of nitroxazepine in pharmaceutical formulation and biological fluids. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000286707900024 | Publication Date | 2010-09-08 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0928-4931 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | no | |||
| Call Number | UA @ admin @ c:irua:98685 | Serial | 8743 | ||
| Permanent link to this record | |||||
| Author | Mary Joy, R.; Pobedinskas, P.; Baule, N.; Bai, S.; Jannis, D.; Gauquelin, N.; Pinault-Thaury, M.-A.; Jomard, F.; Sankaran, K.J.; Rouzbahani, R.; Lloret, F.; Desta, D.; D’Haen, J.; Verbeeck, J.; Becker, M.F.; Haenen, K. | ||||
| Title | The effect of microstructure and film composition on the mechanical properties of linear antenna CVD diamond thin films | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Acta materialia | Abbreviated Journal | Acta Materialia |
| Volume | 264 | Issue | Pages | 119548 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This study reports the impact of film microstructure and composition on the Young’s modulus and residual stress in nanocrystalline diamond (NCD) thin films ( thick) grown on silicon substrates using a linear antenna microwave plasma-enhanced chemical vapor deposition (CVD) system. Combining laser acoustic wave spectroscopy to determine the elastic properties with simple wafer curvature measurements, a straightforward method to determine the intrinsic stress in NCD films is presented. Two deposition parameters are varied: (1) the substrate temperature from 400 °C to 900 °C, and (2) the [P]/[C] ratio from 0 ppm to 8090 ppm in the H2/CH4/CO2/PH3 diamond CVD plasma. The introduction of PH3 induces a transition in the morphology of the diamond film, shifting from NCD with larger grains to ultra-NCD with a smaller grain size, concurrently resulting in a decrease in Young’s modulus. Results show that the highest Young’s modulus of (113050) GPa for the undoped NCD deposited at 800 °C is comparable to single crystal diamond, indicating that NCD with excellent mechanical properties is achievable with our process for thin diamond films. Based on the film stress results, we propose the origins of tensile intrinsic stress in the diamond films. In NCD, the tensile intrinsic stress is attributed to larger grain size, while in ultra-NCD films the tensile intrinsic stress is due to grain boundaries and impurities. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001126632800001 | Publication Date | 2023-11-23 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 9.4 | Times cited | Open Access | Not_Open_Access | |
| Notes | This work was financially supported by the Special Research Fund (BOF) via Methusalem NANO network, the Research Foundation – Flanders (FWO) via Project G0D4920N, and the CORNET project nr 263-EN “ULTRAHARD: Ultrahard optical diamond coatings” (2020–2021). | Approved | Most recent IF: 9.4; 2024 IF: 5.301 | ||
| Call Number | EMAT @ emat @c:irua:202169 | Serial | 8989 | ||
| Permanent link to this record | |||||
| Author | Volders, J.; Elen, K.; Raes, A.; Ninakanti, R.; Kelchtermans, A.-S.; Sastre, F.; Hardy, A.; Cool, P.; Verbruggen, S.W.; Buskens, P.; Van Bael, M.K. | ||||
| Title | Sunlight-powered reverse water gas shift reaction catalysed by plasmonic Au/TiO₂ nanocatalysts : effects of Au particle size on the activity and selectivity | Type | A1 Journal article | ||
| Year | 2022 | Publication | Nanomaterials | Abbreviated Journal | Nanomaterials-Basel |
| Volume | 12 | Issue | 23 | Pages | 4153-13 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Laboratory of adsorption and catalysis (LADCA); Sustainable Energy, Air and Water Technology (DuEL) | ||||
| Abstract |
This study reports the low temperature and low pressure conversion (up to 160 °C, p = 3.5 bar) of CO2 and H2 to CO using plasmonic Au/TiO2 nanocatalysts and mildly concentrated artificial sunlight as the sole energy source (up to 13.9 kW·m-2 = 13.9 suns). To distinguish between photothermal and non-thermal contributors, we investigated the impact of the Au nanoparticle size and light intensity on the activity and selectivity of the catalyst. A comparative study between P25 TiO2-supported Au nanocatalysts of a size of 6 nm and 16 nm displayed a 15 times higher activity for the smaller particles, which can only partially be attributed to the higher Au surface area. Other factors that may play a role are e.g., the electronic contact between Au and TiO2 and the ratio between plasmonic absorption and scattering. Both catalysts displayed ≥84% selectivity for CO (side product is CH4). Furthermore, we demonstrated that the catalytic activity of Au/TiO2 increases exponentially with increasing light intensity, which indicated the presence of a photothermal contributor. In dark, however, both Au/TiO2 catalysts solely produced CH4 at the same catalyst bed temperature (160 °C). We propose that the difference in selectivity is caused by the promotion of CO desorption through charge transfer of plasmon generated charges (as a non-thermal contributor). | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000896093900001 | Publication Date | 2022-11-24 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2079-4991 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.3 | Times cited | Open Access | OpenAccess | |
| Notes | Approved | Most recent IF: 5.3 | |||
| Call Number | UA @ admin @ c:irua:191843 | Serial | 7341 | ||
| Permanent link to this record | |||||
| Author | Penders, A.G.; Konstantinović, M.J.; Van Renterghem, W.; Bosch, R.-W.; Schryvers, D.; Somville, F. | ||||
| Title | Characterization of IASCC crack tips extracted from neutron-irradiated flux thimble tube specimens in view of a probabilistic fracture model | Type | A1 Journal article | ||
| Year | 2022 | Publication | Journal of nuclear materials | Abbreviated Journal | J Nucl Mater |
| Volume | 571 | Issue | Pages | 154015-154016 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This study reports the properties of irradiation assisted stress corrosion crack tips extracted by means of focused-ion beam from 60 to 80 dpa neutron-irradiated O-ring specimens tested under straining conditions under a pressurized-water reactor environment. Various crack tip morphologies and surrounding deformation features were analyzed as a function of applied stress, surface oxidation state and loading form – constant versus cyclic. All investigated cracks exhibit grain boundary oxidation in front of the crack tip, with the extent of oxidation being proportional to applied stress. These findings clearly demonstrate that, under the subcritical crack propagation regime, the grain boundary oxide grows faster than the crack. On the other hand, crack tips appertaining to specimens with removed oxide layer at the outer surface show comparatively less oxidation at the crack tip, which could indicate towards crack initiation from regions that exemplify lower stress, such as the O-ring inner surface. Cyclic loading is found to have a more pronounced effect on the crack tip microstructure, demonstrating increased deformation twinning and -martensitic transformation, which signifies towards an increased susceptibility to intergranular failure. Still, the extent of crack tip grain boundary oxidation in this case agrees well with expected values for maximum stress applied during cyclic loading. All results are interpreted based on the probabilistic subcritical crack propagation mechanism and provide strong support to a stress-driven internal oxidation model. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000872389200009 | Publication Date | 2022-09-06 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0022-3115 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.1 | Times cited | Open Access | OpenAccess | |
| Notes | Approved | Most recent IF: 3.1 | |||
| Call Number | UA @ admin @ c:irua:190375 | Serial | 7135 | ||
| Permanent link to this record | |||||
| Author | Muller-Caspary, K.; Krause, F.F.; Grieb, T.; Loffler, S.; Schowalter, M.; Béché, A.; Galioit, V.; Marquardt, D.; Zweck, J.; Schattschneider, P.; Verbeeck, J.; Rosenauer, A. | ||||
| Title | Measurement of atomic electric fields and charge densities from average momentum transfers using scanning transmission electron microscopy | Type | A1 Journal article | ||
| Year | 2016 | Publication | Ultramicroscopy | Abbreviated Journal | Ultramicroscopy |
| Volume | 178 | Issue | 178 | Pages | 62-80 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This study sheds light on the prerequisites, possibilities, limitations and interpretation of high-resolution differential phase contrast (DPC) imaging in scanning transmission electron microscopy (STEM). We draw particular attention to the well-established DPC technique based on segmented annular detectors and its relation to recent developments based on pixelated detectors. These employ the expectation value of the momentum transfer as a reliable measure of the angular deflection of the STEM beam induced by an electric field in the specimen. The influence of scattering and propagation of electrons within the specimen is initially discussed separately and then treated in terms of a two-state channeling theory. A detailed simulation study of GaN is presented as a function of specimen thickness and bonding. It is found that bonding effects are rather detectable implicitly, e.g., by characteristics of the momentum flux in areas between the atoms than by directly mapping electric fields and charge densities. For strontium titanate, experimental charge densities are compared with simulations and discussed with respect to experimental artifacts such as scan noise. Finally, we consider practical issues such as figures of merit for spatial and momentum resolution, minimum electron dose, and the mapping of larger-scale, built-in electric fields by virtue of data averaged over a crystal unit cell. We find that the latter is possible for crystals with an inversion center. Concerning the optimal detector design, this study indicates that a sampling of 5mrad per pixel is sufficient in typical applications, corresponding to approximately 10x10 available pixels. | ||||
| Address | Institut fur Festkr perphysik, Universitat Bremen, Otto-Hahn-Allee 1, 28359 Bremen, Germany | ||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | English | Wos | 000403862900009 | Publication Date | 2016-05-12 |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0304-3991 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.843 | Times cited | 93 | Open Access | |
| Notes | K.M.-C. acknowledges support from the Deutsche Forschungsgemeinschaft (DFG) under contract MU3660/1-1. This work was further supported by the DFG under contract RO2057/4-2 and O2057/11-1. J.V. and A.B. acknowledge funding from the European Research Council (ERC) under the 7th Framework Program (FP7), and ERC Starting Grant No. 278510-VORTEX. Experimental results are obtained on the Qu-Ant-EM microscope partly funded by the Hercules fund from the Flemish government. J.V. also acknowledges funding through a GOA project “Solarpaint” of the University of Antwerp. SL and PS acknowledge financial support by the Austrian Science Fund (FWF) under grants No. I543-N20 and J3732-N27. ECASJO_; | Approved | Most recent IF: 2.843 | ||
| Call Number | c:irua:134125UA @ admin @ c:irua:134125 | Serial | 4098 | ||
| Permanent link to this record | |||||
| Author | Romero-Pastor, J.; Garcia-Porras, A.; Van Grieken, R.; Potgieter-Vermaak, S.; Coll-Conesa, J.; Cardell, C. | ||||
| Title | New insights in technology characterization of medieval Valencia glazes | Type | A1 Journal article | ||
| Year | 2015 | Publication | X-ray spectrometry | Abbreviated Journal | |
| Volume | 44 | Issue | 6 | Pages | 426-435 |
| Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
| Abstract |
This study shows the first Raman microscopy (RM) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) characterization of two 14th and 15th century lead-glazed and luster ceramics from the Manises and Paterna workshops (Valencia, Spain) produced after the Aragon Christian conquest of the Iberian Peninsula (14th century). According to experts, these coetaneous ceramics were most probably involved in a process of technological transfer from the Islamic area of Southeast Spain to the Christian area of Valencia (East Spain) at the beginning of the 14th century; later on, the celebrated Manises and Paterna workshops were formed. Although these ceramics have been studied widely in terms of production technology (ceramic body, glazes and luster) using an array of diverse analytical techniques, until now, an RM study has not been carried out. This paper presents results regarding the complex chemical composition of the glaze and luster coloring agents, and the quality of color manufacturing processes, elucidating firing conditions via spectral components analysis (i.e., Q(n) for stretching/bending components) and polymerization index (Ip), emphasizing chronology and pigment technology changes between both Valencian workshops. Coloring agents identified in glazes and lusters were cobalt present in blue glazes, copper in greenish glazes, copper and cobalt in the turquoise glaze, and pyrolusite in black glazes. Tin oxyde was used as an opacifier in white glazes. Two luster manufacture recipes were recognized mainly based on copper and silver compounds. Calculated firing temperatures were up to 1000 degrees C for white glazes and up to 600 degrees C for luster and color glazes. Copyright (c) 2015 John Wiley & Sons, Ltd. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000363279600002 | Publication Date | 2015-03-12 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0049-8246 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | no | |||
| Call Number | UA @ admin @ c:irua:129445 | Serial | 8300 | ||
| Permanent link to this record | |||||
| Author | Chelan, M.M.; Alijanpour, A.; Barani, H.; Motamedi, J.; Azadi, H.; Van Passel, S. | ||||
| Title | Economic sustainability assessment in semi-steppe rangelands | Type | A1 Journal article | ||
| Year | 2018 | Publication | Science Of The Total Environment | Abbreviated Journal | Sci Total Environ |
| Volume | 637-638 | Issue | 637-638 | Pages | 112-119 |
| Keywords | A1 Journal article; Engineering Management (ENM) | ||||
| Abstract |
This study was conducted to determine indices and components of economic sustainability assessment in the pastoral units of Sahand summer rangelands. The method was based on descriptive-analytical survey (experts and researchers) with questionnaires. Analysis of variance showed that the mean values of economic components are significantly different from each other and the efficiency component has the highest mean value (0.57). The analysis of rangeland pastoral unitswith the technique for order-preference by similarity to ideal solution (TOPSIS) indicated that from an economic sustainability standpoint, Garehgol (Ci = 0.519) and Badir Khan (Ci = 0.129), pastoral units ranked first and last, respectively. This study provides a clear understanding of existing resources and opportunities for policy makers that is crucial to approach economic sustainable development. Accordingly, this study can help better define sustainable development goals and monitor the progress of achieving them. (C) 2018 Elsevier B.V. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000436605400012 | Publication Date | 2018-05-09 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0048-9697 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles; WoS full record; WoS citing articles | |
| Impact Factor | 4.9 | Times cited | 7 | Open Access | |
| Notes | ; ; | Approved | Most recent IF: 4.9 | ||
| Call Number | UA @ admin @ c:irua:153617 | Serial | 6190 | ||
| Permanent link to this record | |||||
| Author | Rodrigues Lavor, I. | ||||
| Title | Plasmons and electronic transport in two-dimensional materials | Type | Doctoral thesis | ||
| Year | 2021 | Publication | Abbreviated Journal | ||
| Volume | Issue | Pages | 219 p. | ||
| Keywords | Doctoral thesis; Condensed Matter Theory (CMT) | ||||
| Abstract |
This thesis presents, in its first part, an investigation on the trembling motion of wave packets known as zitterbewegung (ZBW), in multilayer graphene, as well as in moiré excitons in twisted MoS2/WSe2 hetero-bilayers. In the last few decades, the dynamics of wave packets has been subject of many theoretical and experimental studies in various types of systems such as semiconductors, superconductors, crystalline solids and cold atoms. The discovery of graphene and moiré excitons in twisted hetero-bilayers, brought two new platforms for the investigation on time evolution of wave packets and possible observation of ZBW. This trembling motion was first theoretically predicted by Schrödinger for wave packets describing particles that obey the Dirac equation. This is exactly the case of low energy electrons in graphene, as well as of moiré exciton in twisted MoS2/WSe2 under an external applied electromagnetic field. ZBW in multilayer graphene was studied both analytically and computationally, respectively, through the Green's function and split-operator methods. In this system, it is found that ZBW depends not only on the wave packet width and initial pseudospin polarization, but also on the number of layers. Furthermore, the analytical and numerical methods proposed here allow to investigate wave packet dynamics in graphene systems with an arbitrary number of layers and arbitrary potential landscapes. For moiré excitons in twisted MoS2/WSe2 hetero-bilayers, it is shown that, analogously to other Dirac-like particles, this system also exhibits ZBW when under a perpendicular applied field. In this case, the ZBW presents long timescales that are compatible with current experimental techniques for exciton dynamics. This promotes the study of the dynamics of moiré excitons in van der Waals heterostructures as an advantageous solidstate platform to probe zitterbewegung, broadly tunable by gating and inter-layer twist angle. In the second part of this thesis, a study into graphene plasmonic in van der Waals heterostructure (vdWhs) are treated in a linear response framework within the Random Phase Approximation and with support of the quantum electrostatic heterostructure (QEH), a DFT-based method. Since Dirac plasmons in graphene are very sensitive to the dielectric properties of the environment, it is possible to explore this property to probe the structure and composition of van der Waals heterostructures (vdWh) placed underneath a single graphene layer. In this way, one can achieve a layer sensitivity of a single layer and differentiate between different TMDs for heterostructures thicker than 2 layers. As a consequence of this, study, the hybridization of Dirac plasmons in graphene with phonons of transition metal dichalcogenides (TMDs), when the materials are combined in so-called van der Waals heterostructures (vdWh) forming surface plasmon-phonon polaritons (SPPPs) are also investigated. It was found that it is possible to realize both strong and ultrastrong coupling regimes by tuning graphene’s Fermi energy and changing TMD layer number. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | |||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | ISBN | Additional Links | UA library record | ||
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | Most recent IF: NA | |||
| Call Number | UA @ admin @ c:irua:181012 | Serial | 7011 | ||
| Permanent link to this record | |||||
| Author | Zhu, W. | ||||
| Title | Microbial resource management for mainstream partial nitritation/anammox : strategies to enhance the nitrogen conversion efficiency | Type | Doctoral thesis | ||
| Year | 2021 | Publication | Abbreviated Journal | ||
| Volume | Issue | Pages | 207 p. | ||
| Keywords | Doctoral thesis; Sustainable Energy, Air and Water Technology (DuEL) | ||||
| Abstract |
This thesis provides three potential ways to enhance the nitrogen removal efficiency of mainstream partial nitritation/anammox (PN/A), a key technology to enable energy-positive sewage treatment. In Chapter 1, the typical technologies to promote nitrogen removal efficiency are summarized. In Chapters 2 and 3, the concept ‘winter bioaugmentation with stored summer surplus sludge’ is proposed. Applying that, a cost-effective sludge preservation strategy is required. Preserving PN/A biomass without cooling and redox adjustment proved to be the cost-effective strategy. The reactivation of these stored sludges was also tested in low-temperature systems (15 and 10℃). Respectively 56% and 41% of granules activity compared to pre-storage activity (after Arrhenius-based temperature correction) could be recovered within a month (41% and 32% for flocs activity). In the end, the stored AnAOB bioaugmentation was successfully validated in the lab (20℃). In Chapter 4, a return-sludge nursery concept, applying the sidestream nitritation and blending the resulting effluent with mainstream effluent to achieve an intermediate temperature and nitrogen concentrations, is proposed. That led to a 33 – 36% increase in nitrogen removal efficiency. Arrhenius’ expectations (10 ℃ higher temperature, θ = 1.09) could only explain 49-51% of the activity increase in the nursery reactor, pointing to the role of other factors, e.g., the ~400% elevated electrical conductivity (15-16%), the 56-335% higher effluent nitrogen concentrations (12-14%), and the synergy and unknown factors (20-23%). Thus, the return-sludge biostimulation approach could also enhance nitrogen efficiency in the mainstream. In Chapter 5, the N2O emissions, linked to three typical nitrite-oxidizing bacteria (NOB) suppression strategies (low dissolved oxygen (DO) level, free ammonia (FA), and free nitrous acids (FNA) treatments) were tested in a biofilm system. A low emerged DO level (~0.60 mg O2 L-1) was effective to suppress NOB activity and decrease N2O emissions, but NOB adaptation gradually appeared after 200 days. Further NOB inhibition was successfully achieved by periodical (3 hours per week) FA (~30 mg NH3-N L-1) or FNA (~3 mg HNO2-N L-1) treatments. The FA treatment promoted N2O production, while the FNA treatment had no effect. Thus, PN/A systems should be operated at relatively low DO levels with periodical FNA treatment. In Chapter 6, the major findings proposed and the main conclusions drawn in this thesis are outlined. Beyond that, the possible design of a mainstream PN/A configuration that combined all described three technologies is demonstrated. Overall, the novel insights from this thesis potential to improve nitrogen removal efficiency in the mainstream. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | |||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | ISBN | Additional Links | UA library record | ||
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | Most recent IF: NA | |||
| Call Number | UA @ admin @ c:irua:184236 | Serial | 8245 | ||
| Permanent link to this record | |||||
| Author | Lambrinou, K.; Charalampopoulou, E.; Van der Donck, T.; Delville, R.; Schryvers, D. | ||||
| Title | Dissolution corrosion of 316L austenitic stainless steels in contact with static liquid lead-bismuth eutectic (LBE) at 500 °C | Type | A1 Journal article | ||
| Year | 2017 | Publication | Journal of nuclear materials | Abbreviated Journal | J Nucl Mater |
| Volume | 490 | Issue | 490 | Pages | 9-27 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This work addresses the dissolution corrosion behaviour of 316L austenitic stainless steels. For this purpose, solution-annealed and cold-deformed 316L steels were simultaneously exposed to oxygen-poor (<10-8 mass%) static liquid lead-bismuth eutectic (LBE) for 253e3282 h at 500 °C. Corrosion was consistently more severe for the cold-drawn steels than the solution-annealed steel, indicating the importance of the steel thermomechanical state. The thickness of the dissolution-affected zone was nonuniform, and sites of locally-enhanced dissolution were occasionally observed. The progress of LBE dissolution attack was promoted by the interplay of certain steel microstructural features (grain boundaries, deformation twin laths, precipitates) with the dissolution corrosion process. The identified dissolution mechanisms were selective leaching leading to steel ferritization, and non-selective leaching; the latter was mainly observed in the solution-annealed steel. The maximum corrosion rate decreased with exposure time and was found to be inversely proportional to the depth of dissolution attack. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000403132300002 | Publication Date | 2017-04-10 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0022-3115 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.048 | Times cited | 24 | Open Access | OpenAccess |
| Notes | The authors would like to acknowledge the following 316L stainless steel suppliers: Industeel, ArcelorMittal Group, for the 316LSA plate procured and characterised in the FP6 EUROTRANSDEMETRA project (Contract no. FI6W-CT-2004-516520); OLARRA Aceros Inoxidables, Spain, for the 316LH1 rod; and SIDERO STAAL nv, Belgium, for the 316LH2 rod. K. Lambrinou would like to thank J. Joris for technical support during the launching and follow up of all corrosion tests, J. Lim for the manufacturing and calibration of the oxygen sensors used in these tests, T. Lapauw for the XRD measurements on the pristine steels, and S. Van den Broeck for the FIB sample preparation. Special thanks to S. Gavrilov for fruitful and intense discussions. The authors gratefully acknowledge the funding provided in the framework of the ongoing development of the MYRRHA irradiation facility. The research leading to these results falls within the framework of the European Energy Research Alliance Joint Programme on Nuclear Materials (EERA JPNM). | Approved | Most recent IF: 2.048 | ||
| Call Number | EMAT @ emat @ c:irua:142644 | Serial | 4563 | ||
| Permanent link to this record | |||||
| Author | Charalampopoulou, E.; Lambrinou, K.; Van der Donck, T.; Paladino, B.; Di Fonzo, F.; Azina, C.; Eklund, P.; Mraz, S.; Schneider, J.M.; Schryvers, D.; Delville, R. | ||||
| Title | Early stages of dissolution corrosion in 316L and DIN 1.4970 austenitic stainless steels with and without anticorrosion coatings in static liquid lead-bismuth eutectic (LBE) at 500 degrees C | Type | A1 Journal article | ||
| Year | 2021 | Publication | Materials Characterization | Abbreviated Journal | Mater Charact |
| Volume | 178 | Issue | Pages | 111234 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This work addresses the early stages (<= 1000 h) of the dissolution corrosion behavior of 316L and DIN 1.4970 austenitic stainless steels in contact with oxygen-poor (C-O < 10(-8) mass%), static liquid lead-bismuth eutectic (LBE) at 500 degrees C for 600-1000 h. The objective of this study was to determine the relative early-stage resistance of the uncoated steels to dissolution corrosion and to assess the protectiveness of select candidate coatings (Cr2AlC, Al2O3, V2AlxCy). The simultaneous exposure of steels with intended differences in microstructure and thermomechanical state showed the effects of steel grain size, density of annealing/deformation twins, and secondary precipitates on the steel dissolution corrosion behavior. The findings of this study provide recommendations on steel manufacturing with the aim of using the steels to construct Gen-IV lead-cooled fast reactors. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000752582700001 | Publication Date | 2021-06-01 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1044-5803 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.714 | Times cited | Open Access | OpenAccess | |
| Notes | Approved | Most recent IF: 2.714 | |||
| Call Number | UA @ admin @ c:irua:186509 | Serial | 7061 | ||
| Permanent link to this record | |||||
| Author | Phuttaro, C.; Krishnan, S.; Saritpongteeraka, K.; Charnnok, B.; Diels, L.; Chaiprapat, S. | ||||
| Title | Integrated poultry waste management by co-digestion with perennial grass : effects of mixing ratio, pretreatments, reaction temperature, and effluent recycle on biomethanation yield | Type | A1 Journal article | ||
| Year | 2023 | Publication | Biochemical engineering journal | Abbreviated Journal | |
| Volume | 196 | Issue | Pages | 108937-12 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) | ||||
| Abstract |
This work aims to enhance the efficiency of integrated poultry waste management in bio-circular-green economy by maximizing the co-digestion of chicken manure and its digestate-grown biomass. In a series of batch assays, Napier grass (NG) was mixed with chicken manure (CM) at various proportions (100:0, 80:20, 60:40, 50:50, 40:60, 20:80 and 0:100) to identify co-substrate synergism, followed by physiochemical conditioning (size reduction and ultrasonication) of NG before co-digestion. Results indicated that NG mix of at least 80% was required to gain a full methanation potential of the individual substrates; no synergistic ratio above unity was found. However, the combined effect of size reduction and sonication was found to markedly improve the cosubstrate's biodegradability by 88.7%. The findings were then used to run continuous co-digestion at various operating regimes. In optimal continuous co-digestion condition, NG particle size of 0.6-2.4 mm combined with sonication intensity at 1111 kJ/kgTS improved biomethanation yield as high as 106.3%. Sub-thermophilic digestion at 45 degrees C was shown to give a higher and more stable CH4 yield than at 55 degrees C. Finally, it was also found that recycling liquid effluent at 40% to replace freshwater in feed, although showed no significant difference in CH4 yield (& alpha; = 0.05), noticeably increased system buffer capacity. This optimized biodegradation regime could give co-digestion waste management a higher overall plant efficiency and economic return. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001054826200001 | Publication Date | 2023-04-06 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1369-703x; 1873-295x | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 3.9 | Times cited | Open Access | Not_Open_Access | |
| Notes | Approved | Most recent IF: 3.9; 2023 IF: 2.892 | |||
| Call Number | UA @ admin @ c:irua:199209 | Serial | 8887 | ||
| Permanent link to this record | |||||
| Author | Resta, V.; Afonso, C.N.; Piscopiello, E.; Van Tendeloo, G. | ||||
| Title | Role of substrate on nucleation and morphology of gold nanoparticles produced by pulsed laser deposition | Type | A1 Journal article | ||
| Year | 2009 | Publication | Physical review : B : solid state | Abbreviated Journal | Phys Rev B |
| Volume | 79 | Issue | 23 | Pages | 235409,1-235409,6 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This work compares the morphology of gold nanoparticles (NPs) produced at room temperature on single-crystalline (MgO nanocubes and plates) and amorphous (carbon/glass plates) substrates by pulsed laser deposition (PLD). The results show that similar deposition and nucleation rates (>5×1013 cm−2 s−1) are achieved irrespective of the nature of the substrate. Instead, the shape of NPs is substrate dependent, i.e., quasispheres and faceted NPs in amorphous and single-crystalline substrates, respectively. The shape of the latter is octahedral for small NPs and truncated octahedral for large ones, with the degree of truncation being well explained using the Wulff-Kaichew theorem. Furthermore, epitaxial growth at room temperature is demonstrated for single-crystalline substrate. The large fraction of ions having energies higher than 200 eV and the large flux of species arriving to the substrate (1016 at. cm−2 s−1) involved in the PLD process are, respectively, found to be responsible for the high nucleation rates and epitaxial growth at room temperature. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Lancaster, Pa | Editor | ||
| Language | Wos | 000267699500116 | Publication Date | 2009-06-10 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1098-0121;1550-235X; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.836 | Times cited | 16 | Open Access | |
| Notes | Approved | Most recent IF: 3.836; 2009 IF: 3.475 | |||
| Call Number | UA @ lucian @ c:irua:77692 | Serial | 2922 | ||
| Permanent link to this record | |||||
| Author | Kummamuru, N.B.; Perreault, P.; Lenaerts, S. | ||||
| Title | A new generalized empirical correlation for predicting methane hydrate equilibrium conditions in pure water | Type | A1 Journal article | ||
| Year | 2021 | Publication | Industrial & Engineering Chemistry Research | Abbreviated Journal | Ind Eng Chem Res |
| Volume | 60 | Issue | 8 | Pages | 3474-3483 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) | ||||
| Abstract |
This work contributes to a new generalized empirical correlation for predicting methane (CH4) hydrate equilibrium conditions in pure water. Unlike the conventional thermodynamic approach that involves complex reckoning, the proposed empirical equation is developed by regressing 215 experimental data points from the literature and validating with 45 data points for predicting methane hydrate equilibrium conditions in pure water. The new correlation is proposed for a temperature and pressure range of 273.2–303.48 K and 2.63–72.26 MPa, respectively. The accuracy and performance of the proposed correlation is quantitatively evaluated using statistical error analysis. The proposed correlation was able to estimate CH4 hydrate equilibrium conditions satisfactorily with an R2 of 0.99987. The overall error analysis for the proposed correlation shows fair agreement with the experimental data reported within the literature. Concurrently, the new correlation showed better performance in predicting equilibrium conditions compared to those calculated by other empirical correlations available in the literature within the investigated range. In addition, the proposed empirical equation is also checked to evaluate its efficacy in fitting each set of experimental binary/ternary methane hydrates (BTMH) and binary hydrogen hydrates (BHH) for an accurate representation of equilibrium data over a wide range of composition, pressure, and temperature conditions. A maximum percentage deviation of 0.58% and 0.24% was observed between experimental and calculated equilibrium conditions for BTMH and BHH, respectively. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000626326200017 | Publication Date | 2021-02-19 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0888-5885; 1520-5045 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.843 | Times cited | Open Access | Not_Open_Access | |
| Notes | Approved | Most recent IF: 2.843 | |||
| Call Number | UA @ admin @ c:irua:175862 | Serial | 7394 | ||
| Permanent link to this record | |||||
| Author | Kummamuru, N.B.; Eimer, D.A.; Idris, Z. | ||||
| Title | Viscosity measurement and correlation of unloaded and CO₂-loaded aqueous solutions of N-methyldiethanolamine + 2-amino-2-methyl-1-propanol | Type | A1 Journal article | ||
| Year | 2020 | Publication | Journal Of Chemical And Engineering Data | Abbreviated Journal | J Chem Eng Data |
| Volume | 65 | Issue | 6 | Pages | 3072-3078 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) | ||||
| Abstract |
This work contributes to new and complementary experimental viscosity data for blended amine mixtures of aqueous N-methyldiethanolamine + 2-amino-2-methyl-1-propanol (MDEA + AMP) solutions with and without CO2 at different temperatures and mass fractions. For the unloaded MDEA + AMP solutions, measurements were conducted with total amine mass fractions ranging from 0.30 to 0.60. In the case of CO2-loaded aqueous MDEA + AMP solutions, experiments were performed at CO2 loadings ranging from 0.11 to 0.80. Proposed correlations were used to represent viscosity at the unloaded and CO2-loaded solutions within experimental uncertainty. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000541740100016 | Publication Date | 2020-05-18 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0021-9568; 1520-5134 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.6 | Times cited | Open Access | ||
| Notes | Approved | Most recent IF: 2.6; 2020 IF: 2.323 | |||
| Call Number | UA @ admin @ c:irua:180363 | Serial | 8737 | ||
| Permanent link to this record | |||||
| Author | Deshmukh, S.; Sankaran, K.J.; Korneychuk, S.; Verbeeck, J.; Mclaughlin, J.; Haenen, K.; Roy, S.S. | ||||
| Title | Nanostructured nitrogen doped diamond for the detection of toxic metal ions | Type | A1 Journal article | ||
| Year | 2018 | Publication | Electrochimica acta | Abbreviated Journal | Electrochim Acta |
| Volume | 283 | Issue | 283 | Pages | 1871-1878 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This work demonstrates the applicability of one-dimensional nitrogen-doped diamond nanorods (N-DNRs) for the simultaneous electrochemical (EC) detection of Pb2+ and Cd2+ ions in an electrolyte solution. Well separated voltammetric peaks are observed for Pb2+ and Cd2+ ions using N-DNRs as a working electrode in square wave anodic stripping voltammetry measurements. Moreover, the cyclic voltammetry response of N-DNR electrodes towards the Fe(CN)(6)(/4-)/Fe(CN)(6)(/3-) redox reaction is better as compared to undoped DNR electrodes. This enhancement of EC performance in N-DNR electrodes is accounted by the increased amount of sp(2) bonded nanographitic phases, enhancing the electrical conductivity at the grain boundary (GB) regions. These findings are supported by transmission electron microscopy and electron energy loss spectroscopy studies. Consequently, the GB defect induced N-DNRs exhibit better adsorption of metal ions, which makes such samples promising candidates for next generation EC sensing devices. (C) 2018 Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000441077900203 | Publication Date | 2018-07-21 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0013-4686 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.798 | Times cited | 22 | Open Access | |
| Notes | Sujit Deshmukh indebted to Shiv Nadar University for providing Ph. D. scholarship. The FEI Quanta SEM and Qu-Ant-EM microscope used for the TEM experiments was partly funded by the Hercules fund from the Flemish Government. S. K. and J. V. acknowledge funding from GOA project “Solarpaint” of the University of Antwerp. Kamatchi Jothiramalingam Sankaran is a Postdoctoral Fellow of the Research Foundation-Flanders (FWO). Prof. Ken Haenen acknowledges the Methusalem “NANO” network for financial support. | Approved | Most recent IF: 4.798 | ||
| Call Number | UA @ admin @ c:irua:153072 | Serial | 5366 | ||
| Permanent link to this record | |||||
| Author | Cautaerts, N.; Delville, R.; Stergar, E.; Pakarinen, J.; Verwerft, M.; Yang, Y.; Hofer, C.; Schnitzer, R.; Lamm, S.; Felfer, P.; Schryvers, D. | ||||
| Title | The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study | Type | A1 Journal article | ||
| Year | 2020 | Publication | Acta Materialia | Abbreviated Journal | Acta Mater |
| Volume | 197 | Issue | Pages | 184-197 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This work encompasses an in-depth transmission electron microscopy and atom probe tomography study of Ti-stabilized austenitic steel irradiated with Fe-ions. The focus is on radiation induced segregation and precipitation, and in particular on how Ti and TiC affect these processes. A 15-15Ti steel (grade: DIN 1.4970) in two thermo-mechanical states (cold-worked and aged) was irradiated at different temperatures up to a dose of 40 dpa. At low irradiation temperatures, the cold-worked and aged materials evolved to a similar microstructure dominated by small Si and Ni clusters, corresponding to segregation to small point defect clusters. TiC precipitates, initially present in the aged material, were found to be unstable under these irradiation conditions. Elevated irradiation temperatures resulted in the nucleation of nanometer sized Cr enriched TiC precipitates surrounded by Si and Ni enriched shells. In addition, nanometer sized Ti- and Mn-enriched G-phase (M6Ni16Si7) precipitates formed, often attached to TiC precipitates. Post irradiation, larger number densities of TiC were observed in the cold-worked material compared to the aged material. This was correlated with a lower volume fraction of G-phase. The findings suggest that at elevated irradiation temperatures, the precipitate-matrix interface is an important point defect sink and contributes to the improved radiation resistance of this material. The study is a first of its kind on stabilized steel and demonstrates the significance of the small Ti addition to the evolution of the microstructure under irradiation. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000564767000001 | Publication Date | 2020-07-10 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 9.4 | Times cited | Open Access | Not_Open_Access | |
| Notes | ; This work was supported by ENGIE [contract number 2015-AC-007 e BSUEZ6900]; the U.S. Department of Energy, Office of Nuclear Energy under DOE Idaho Operations Office Contract DE-AC07051D14517 as part of a Nuclear Science User Facilities experiment; and by the MYRRHA program at SCK-CEN, Belgium. Funding of the Austrian BMK (846933) in the framework of the program “Production of the future” and the “BMK Professorship for Industry” is gratefully acknowledged. We want to thank the staffat MIBL for assisting with the ion irradiations as well as the staffat CAES for assisting with FIB work and conducting APT measurements. ; | Approved | Most recent IF: 9.4; 2020 IF: 5.301 | ||
| Call Number | UA @ admin @ c:irua:171956 | Serial | 6626 | ||
| Permanent link to this record | |||||
| Author | Belov, I.; Paulussen, S.; Bogaerts, A. | ||||
| Title | Appearance of a conductive carbonaceous coating in a CO2dielectric barrier discharge and its influence on the electrical properties and the conversion efficiency | Type | A1 Journal article | ||
| Year | 2016 | Publication | Plasma sources science and technology | Abbreviated Journal | Plasma Sources Sci T |
| Volume | 25 | Issue | 25 | Pages | 015023 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract |
This work examines the properties of a dielectric barrier discharge (DBD) reactor, built for CO2 decomposition, by means of electrical characterization, optical emission spectroscopy and gas chromatography. The discharge, formed in an electronegative gas (such as CO2, but also O2), exhibits clearly different electrical characteristics, depending on the surface conductivity of the reactor walls. An asymmetric current waveform is observed in the metaldielectric (MD) configuration, with sparse high-current pulses in the positive half-cycle (HC) and a more uniform regime in the negative HC. This indicates that the discharge is operating in two alternating regimes with rather different properties. At high CO2 conversion regimes, a conductive coating is deposited on the dielectric. This so-called coated MD configuration yields a symmetric current waveform, with current peaks in both the positive and negative HCs. In a double-dielectric (DD) configuration, the current waveform is also symmetric, but without current peaks in both the positive and negative HC. Finally, the DD configuration with conductive coating on the inner surface of the outer dielectric, i.e. so-called coated DD, yields again an asymmetric current waveform, with current peaks in the negative HC. These different electrical characteristics are related to the presence of the conductive coating on the dielectric wall of the reactor and can be explained by an increase of the local barrier capacitance available for charge transfer. The different discharge regimes affect the CO2 conversion, more specifically, the CO2 conversion is lowest in the clean DD configuration. It is somewhat higher in the coated DD configuration, and still higher in the MD configuration. The clean and coated MD configuration, however, gave similar CO2 conversion. These results indicate that the conductivity of the dielectric reactor walls can highly promote the development of the high-amplitude discharge current pulses and subsequently the CO2 conversion. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000370974800030 | Publication Date | 2016-01-21 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0963-0252 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.302 | Times cited | 25 | Open Access | |
| Notes | The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7-PEOPLE-2013-ITN) under Grant Agreement № 606889 (RAPID—Reactive Atmospheric Plasma processIng—eDucation network). | Approved | Most recent IF: 3.302 | ||
| Call Number | c:irua:130790 | Serial | 4006 | ||
| Permanent link to this record | |||||
| Author | Alves, L.L.; Bogaerts, A.; Guerra, V.; Turner, M.M. | ||||
| Title | Foundations of modelling of nonequilibrium low-temperature plasmas | Type | A1 Journal article | ||
| Year | 2018 | Publication | Plasma sources science and technology | Abbreviated Journal | Plasma Sources Sci T |
| Volume | 27 | Issue | 2 | Pages | 023002 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract |
This work explains the need for plasma models, introduces arguments for choosing the type of model that better fits the purpose of each study, and presents the basics of the most common nonequilibrium low-temperature plasma models and the information available from each one, along with an extensive list of references for complementary in-depth reading. The paper presents the following models, organised according to the level of multi-dimensional description of the plasma: kinetic models, based on either a statistical particle-in-cell/Monte-Carlo approach or the solution to the Boltzmann equation (in the latter case, special focus is given to the description of the electron kinetics); multi-fluid models, based on the solution to the hydrodynamic equations; global (spatially-average) models, based on the solution to the particle and energy rate-balance equations for the main plasma species, usually including a very complete reaction chemistry; mesoscopic models for plasma–surface interaction, adopting either a deterministic approach or a stochastic dynamical Monte-Carlo approach. For each plasma model, the paper puts forward the physics context, introduces the fundamental equations, presents advantages and limitations, also from a numerical perspective, and illustrates its application with some examples. Whenever pertinent, the interconnection between models is also discussed, in view of multi-scale hybrid approaches. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000425688600001 | Publication Date | 2018-02-20 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1361-6595 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.302 | Times cited | 17 | Open Access | OpenAccess |
| Notes | The authors would like to thank A Tejero-Del-Caz and A Berthelot for their technical contributions in writing the manuscript. This work was partially funded by Portuguese FCT —Fundação para a Ciência e a Tecnologia, under projects UID/ FIS/50010/2013, PTDC/FISPLA/1243/2014 (KIT-PLAS- MEBA) and PTDC/FIS-PLA/1420/2014 (PREMiERE). | Approved | Most recent IF: 3.302 | ||
| Call Number | PLASMANT @ plasmant @c:irua:149391 | Serial | 4810 | ||
| Permanent link to this record | |||||
| Author | Gasparotto, A.; Barreca, D.; Fornasiero, P.; Gombac, V.; Lebedev, O.; Maccato, C.; Montini, T.; Tondello, E.; Van Tendeloo, G.; Comini, E.; Sberveglieri, G. | ||||
| Title | Multi-functional copper oxide nanosystems for H2 sustainable production and sensing | Type | A2 Journal article | ||
| Year | 2009 | Publication | ECS transactions | Abbreviated Journal | |
| Volume | 25 | Issue | 8 | Pages | 1169-1176 |
| Keywords | A2 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This work focuses on the use of tailored copper oxide nanoarchitectures as multi-functional materials for the sustainable production of hydrogen and its on-line detection. An innovative copper(II) precursor, Cu(hfa)2TMEDA, was adopted in the CVD of CuxO (x=1,2) nanosystems under both O2 and O2+H2O atmospheres on Si(100) and Al2O3 substrates. A multi-technique characterization indicates that both the phase composition (from Cu2O to CuO) and morphology (from continuous films to entangled quasi-1D nanosystems) can be tailored by varying the growth temperature and reaction atmosphere. The obtained CuxO nanodeposits are active in the photocatalytic H2 production from aqueous solutions under UV-Vis irradiation and display interesting gas sensing performances towards hydrogen detection even at moderate temperatures. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | Publication Date | 0000-00-00 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1938-5862 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | Most recent IF: NA | |||
| Call Number | UA @ lucian @ c:irua:81872 | Serial | 2211 | ||
| Permanent link to this record | |||||
| Author | Tunca, B.; Lapauw, T.; Callaert, C.; Hadermann, J.; Delville, R.; Caspi, E.'ad N.; Dahlqvist, M.; Rosen, J.; Marshal, A.; Pradeep, K.G.; Schneider, J.M.; Vleugels, J.; Lambrinou, K. | ||||
| Title | Compatibility of Zr₂AlC MAX phase-based ceramics with oxygen-poor, static liquid lead-bismuth eutectic | Type | A1 Journal article | ||
| Year | 2020 | Publication | Corrosion Science | Abbreviated Journal | Corros Sci |
| Volume | 171 | Issue | Pages | 108704-108719 | |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This work investigates the compatibility of Zr2AlC MAX phase-based ceramics with liquid LBE, and proposes a mechanism to explain the observed local Zr2AlC/LBE interaction. The ceramics were exposed to oxygen-poor (C-O <= 2.2 x 10(-10) mass%), static liquid LBE at 500 degrees C for 1000 h. A new Zr-2(Al,Bi,Pb)C MAX phase solid solution formed in-situ in the LBE-affected Zr2AlC grains. Out-of-plane ordering was favorable in the new solid solution, whereby A-layers with high and low-Bi/Pb contents alternated in the crystal structure, in agreement with first-principles calculations. Bulk Zr-2(Al,Bi,Pb)C was synthesized by reactive hot pressing to study the crystal structure of the solid solution by neutron diffraction. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000537624600005 | Publication Date | 2020-04-27 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0010-938x | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 8.3 | Times cited | 3 | Open Access | Not_Open_Access |
| Notes | ; B.T. acknowledges the financial support of the SCK CEN Academy for Nuclear Science and Technology (Belgium). This research was partly funded by the European Atomic Energy Community's (Euratom) Seventh Framework Programme FP7/ 2007-2013 under Grant Agreement No. 604862 (FP7 MatISSE), the MYRRHA project (SCK CEN, Belgium), as well as by the Euratom research and training programme 2014-2018 under Grant Agreement No. 740415 (H2020 IL TROVATORE). The performed research falls within the framework of the EERA (European Energy Research Alliance) Joint Programme on Nuclear Materials (JPNM). The authors gratefully acknowledge the Hercules Foundation for Project AKUL/1319 (CombiS(T)EM)) and the Knut and Alice Wallenberg (KAW) foundation. The calculations were carried out using supercomputer resources provided by the Swedish National Infrastructure for Computing (SNIC) at the High Performance Computing Center North (HPC2N) and the PDC Center for High Performance Computing. E.N.C. thanks Offir Ozeri for his help in NPD data acquiring. ; | Approved | Most recent IF: 8.3; 2020 IF: 5.245 | ||
| Call Number | UA @ admin @ c:irua:170157 | Serial | 6475 | ||
| Permanent link to this record | |||||
| Author | van Walsem, J.; Roegiers, J.; Modde, B.; Lenaerts, S.; Denys, S. | ||||
| Title | Integration of a photocatalytic multi-tube reactor for indoor air purification in HVAC systems : a feasibility study | Type | A1 Journal article | ||
| Year | 2018 | Publication | Environmental Science and Pollution Research | Abbreviated Journal | Environ Sci Pollut R |
| Volume | 25 | Issue | 18 | Pages | 18015-18026 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) | ||||
| Abstract |
This work is focused on an in-depth experimental characterization of multi-tube reactors for indoor air purification integrated in ventilation systems. Glass tubes were selected as an excellent photocatalyst substrate to meet the challenging requirements of the operating conditions in a ventilation system in which high flow rates are typical. Glass tubes show a low-pressure drop which reduces the energy demand of the ventilator, and additionally, they provide a large exposed surface area to allow interaction between indoor air contaminants and the photocatalyst. Furthermore, the performance of a range of P25-loaded sol-gel coatings was investigated, based on their adhesion properties and photocatalytic activities. Moreover, the UV light transmission and photocatalytic reactor performance under various operating conditions were studied. These results provide vital insights for the further development and scaling up of multi-tube reactors in ventilation systems which can provide a better comfort, improved air quality in indoor environments, and reduced human exposure to harmful pollutants. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000436879200071 | Publication Date | 2018-04-24 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0944-1344; 1614-7499 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.741 | Times cited | 3 | Open Access | |
| Notes | ; J.V.W. acknowledges the Agentschap Innoveren and Ondernemen for a PhD fellowship. ; | Approved | Most recent IF: 2.741 | ||
| Call Number | UA @ admin @ c:irua:150946 | Serial | 5967 | ||
| Permanent link to this record | |||||
| Author | Abakumov, M.A.; Nukolova, N.V.; Sokolsky-Papkov, M.; Shein, S.A.; Sandalova, T.O.; Vishwasrao, H.M.; Grinenko, N.F.; Gubsky, I.L.; Abakumov, A.M.; Kabanov, A.V.; Chekhonin, V.P.; | ||||
| Title | VEGF-targeted magnetic nanoparticles for MRI visualization of brain tumor | Type | A1 Journal article | ||
| Year | 2015 | Publication | Nanomedicine: nanotechnology, biology and medicine | Abbreviated Journal | Nanomed-Nanotechnol |
| Volume | 11 | Issue | 11 | Pages | 825-833 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This work is focused on synthesis and characterization of targeted magnetic nanoparticles as magnetic resonance imaging (MRI) agents for in vivo visualization of gliomas. Ferric oxide (Fe3O4) cores were synthesized by thermal decomposition and coated with bovine serum albumin (BSA) to form nanoparticles with D-eff of 53 +/- 9 nm. The BSA was further cross-linked to improve colloidal stability. Monoclonal antibodies against vascular endothelial growth factor (mAbVEGF) were covalently conjugated to BSA through a polyethyleneglycol linker. Here we demonstrate that 1) BSA coated nanoparticles are stable and non-toxic to different cells at concentration up to 2.5 mg/mL; 2) conjugation of monoclonal antibodies to nanoparticles promotes their binding to VEGF-positive glioma C6 cells in vitro; 3) targeted nanoparticles are effective in MRI visualization of the intracranial glioma. Thus, mAbVEGF-targeted BSA-coated magnetic nanoparticles are promising MRI contrast agents for glioma visualization. (C) 2015 Elsevier Inc. All rights reserved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | S.l. | Editor | ||
| Language | Wos | 000354559600004 | Publication Date | 2015-01-31 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1549-9634; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 5.72 | Times cited | 62 | Open Access | |
| Notes | Approved | Most recent IF: 5.72; 2015 IF: 6.155 | |||
| Call Number | c:irua:126351 | Serial | 3838 | ||
| Permanent link to this record | |||||
| Author | Buffière, M.; Brammertz, G.; Batuk, M.; Verbist, C.; Mangin, D.; Koble, C.; Hadermann, J.; Meuris, M.; Poortmans, J. | ||||
| Title | Microstructural analysis of 9.7% efficient Cu2ZnSnSe4 thin film solar cells | Type | A1 Journal article | ||
| Year | 2014 | Publication | Applied physics letters | Abbreviated Journal | Appl Phys Lett |
| Volume | 105 | Issue | 18 | Pages | 183903 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract |
This work presents a detailed analysis of the microstructure and the composition of our record Cu 2ZnSnSe4 (CZTSe)-CdS-ZnO solar cell with a total area efficiency of 9.7%. The average composition of the CZTSe crystallites is Cu 1.94 Zn 1.12Sn0.95Se3.99. Large crystals of ZnSe secondary phase (up to 400 nm diameter) are observed at the voids between the absorber and the back contact, while smaller ZnSe domains are segregated at the grain boundaries and close to the surface of the CZTSe grains. An underlying layer and some particles of Cu xSe are observed at the Mo-MoSe2-Cu2ZnSnSe4 interface. The free surface of the voids at the back interface is covered by an amorphous layer containing Cu, S, O, and C, while the presence of Cd, Na, and K is also observed in this region. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | American Institute of Physics | Place of Publication | New York, N.Y. | Editor | |
| Language | Wos | 000345000000086 | Publication Date | 2014-11-08 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0003-6951;1077-3118; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.411 | Times cited | 17 | Open Access | |
| Notes | Approved | Most recent IF: 3.411; 2014 IF: 3.302 | |||
| Call Number | UA @ lucian @ c:irua:121329 | Serial | 2038 | ||
| Permanent link to this record | |||||