NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	121–150 of 269 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 >>

List View

Citations

Details

	Records
	Author	Turner, S.; Tavernier, S.M.F.; Huyberechts, G.; Bals, S.; Batenburg, K.J.; Van Tendeloo, G.
	Title	Assisted spray pyrolysis production and characterisation of ZnO nanoparticles with narrow size distribution			Type	A1 Journal article
	Year	2010	Publication	Journal of nanoparticle research	Abbreviated Journal	J Nanopart Res
	Volume	12	Issue	2	Pages	615-622
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Nano-sized ZnO particles with a narrow size distribution and high crystallinity were prepared from aqueous solutions with high concentrations of Zn2+ containing salts and citric acid in a conventional spray pyrolysis setup. Structure, morphology and size of the produced material were compared to ZnO material produced by simple spray pyrolysis of zinc nitrates in the same experimental setup. Using transmission electron microscopy and electron tomography it has been shown that citric acid-assisted spray pyrolysed material is made up of micron sized secondary particles comprising a shell of lightly agglomerated, monocrystalline primary ZnO nanoparticles with sizes in the 2030 nm range, separable by a simple ultrasonic treatment step.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	S.l.	Editor
	Language		Wos	000275318700025	Publication Date	2009-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1388-0764;1572-896X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.02	Times cited	27	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 2.02; 2010 IF: 3.253
	Call Number	UA @ lucian @ c:irua:81771			Serial	156
Permanent link to this record



	Author	Neek-Amal, M.; Peeters, F.M.
	Title	Nanoindentation of a circular sheet of bilayer graphene			Type	A1 Journal article
	Year	2010	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	81	Issue	23	Pages	235421,1-235421,6
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Nanoindentation of bilayer graphene is studied using molecular-dynamics simulations. We compared our simulation results with those from elasticity theory as based on the nonlinear Föppl-Hencky equations with rigid boundary condition. The force-deflection values of bilayer graphene are compared to those of monolayer graphene. Youngs modulus of bilayer graphene is estimated to be 0.8 TPa which is close to the value for graphite. Moreover, an almost flat bilayer membrane at low temperature under central load has a 14% smaller Youngs modulus as compared to the one at room temperature.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000278710800003	Publication Date	2010-06-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	108	Open Access
	Notes	; We gratefully acknowledge comments from R. Asgari. M.N.-A. would like to thank the Universiteit of Antwerpen for its hospitality where part of this work was performed. This work was supported by the Flemish science foundation (FWO-V1) and the Belgium Science Policy (IAP). ;			Approved	Most recent IF: 3.836; 2010 IF: 3.774
	Call Number	UA @ lucian @ c:irua:83093			Serial	2259
Permanent link to this record



	Author	Quintana, M.; Ke, X.; Van Tendeloo, G.; Meneghetti, M.; Bittencourt, C.; Prato, M.
	Title	Light-induced selective deposition of Au nanoparticles on single-wall carbon nanotubes			Type	A1 Journal article
	Year	2010	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	4	Issue	10	Pages	6105-6113
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Novel applications of single-walled carbon nanotubes (SWNT) rely on the development of new strategies to make them easier to handle without affecting their structural properties. In this work, we have selectively deposited Au nanoparticles (Au NP) on SWNT assisted by UV light irradiation. XPS analysis and UV-vis spectroscopy indicate that the deposition occurs at the defects generated after oxidation of the SWNT. By addition of n-dodecylthiol, the separation of oxidized tubes with Au NP (Au-ox-SWNT) from tubes devoid of Au NP (bare tubes, b-SWNT) was achieved. Raman and UV-vis-NIR spectra indicate that UV irradiation induces a faster nucleation of Au NP on metallic SWNT. This new technique can be useful for the preparation of nanohybrid composites with enhanced properties, as increased thermal stability, and to obtain purified SWNT.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000283453700081	Publication Date	2010-09-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	26	Open Access
	Notes				Approved	Most recent IF: 13.942; 2010 IF: 9.865
	Call Number	UA @ lucian @ c:irua:99202			Serial	1819
Permanent link to this record



	Author	Janssens, K.; Dik, J.; Cotte, M.; Susini, J.
	Title	Photon-based techniques for nondestructive subsurface analysis of painted cultural heritage artifacts			Type	A1 Journal article
	Year	2010	Publication	Accounts of chemical research	Abbreviated Journal	Accounts Chem Res
	Volume	43	Issue	6	Pages	814-825
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	Often, just micrometers below a paintings surface lies a wealth of information, both with Old Masters such as Peter Paul Rubens and Rembrandt van Rijn and with more recent artists of great renown such as Vincent Van Gogh and James Ensor. Subsurface layers may include underdrawing, underpainting, and alterations, and in a growing number of cases conservators have discovered abandoned compositions on paintings, illustrating artists practice of reusing a canvas or panel. The standard methods for studying the inner structure of cultural heritage (CH) artifacts are infrared reflectography and X-ray radiography, techniques that are optionally complemented with the microscopic analysis of cross-sectioned samples. These methods have limitations, but recently, a number of fundamentally new approaches for fully imaging the buildup of hidden paint layers and other complex three-dimensional (3D) substructures have been put into practice. In this Account, we discuss these developments and their recent practical application with CH artifacts. We begin with a tabular summary of 14 IR- and X-ray-based imaging methods and then continue with a discussion of each technique, illustrating CH applications with specific case studies. X-ray-based tomographic and laminographic techniques can be used to generate 3D renditions of artifacts of varying dimensions. These methods are proving invaluable for exploring inner structures, identifying the conservation state, and postulating the original manufacturing technology of metallic and other sculptures. In the analysis of paint layers, terahertz time-domain spectroscopy (THz-TDS) can highlight interfaces between layers in a stratigraphic buildup, whereas macrosopic scanning X-ray fluorescence (MA-XRF) has been employed to measure the distribution of pigments within these layers. This combination of innovative methods provides topographic and color information about the micrometer depth scale, allowing us to look into paintings in an entirely new manner. Over the past five years, several new variants of traditional IR- and X-ray-based imaging methods have been implemented by conservators and museums, and the first reports have begun to emerge in the primary research literature. Applying these state-of-the-art techniques in a complementary fashion affords a more comprehensive view of paintings and other artworks.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000278842500013	Publication Date	2010-05-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0001-4842	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	20.268	Times cited	78	Open Access
	Notes	; This research was supported by the Interuniversity Attraction Poles Programme-Belgian Science Policy (IUAP VI/16). The text also presents results of FWO (Brussels, Belgium) projects nr. G.0704.08 and G.0179.09 and from the UA-BOF GOA programme. ;			Approved	Most recent IF: 20.268; 2010 IF: 21.852
	Call Number	UA @ admin @ c:irua:83983			Serial	5772
Permanent link to this record



	Author	Buysse, C.; Kovalevsky, A.; Snijkers, F.; Buekenhoudt, A.; Mullens, S.; Luyten, J.; Kretzschmar, J.; Lenaerts, S.
	Title	Fabrication and oxygen permeability of gastight, macrovoid-free Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-\delta capillaries for high temperature gas separation			Type	A1 Journal article
	Year	2010	Publication	Journal of membrane science	Abbreviated Journal	J Membrane Sci
	Volume	359	Issue	1-2	Pages	86-92
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Oxygen-permeable perovskites with mixed ionic-electronic conducting properties can play an important role in the separation of oxygen from air which is needed in the oxy-fuel and pre-combustion technologies for the removal and capture of CO2. In this work, gastight, macrovoid-free Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) capillaries were successfully shaped by a phase-inversion spinning technique, followed by calcination and sintering. It was found that both the rheology of the ceramic suspension and the composition of bore liquid and coagulation bath are key factors for making macrovoid-free green capillaries. Gastight BSCF capillaries were obtained by sintering for 5 h at 1100 °C. The sintered BSCF capillaries contained a significant amount of BaSO4 due to a reaction with the polysulfone binder during calcination. The oxygen permeation flux through the BSCF capillaries was measured and compared to literature data on BSCF disk and hollow fiber membranes measured in similar conditions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000279953300010	Publication Date	2009-10-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0376-7388	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.035	Times cited	38	Open Access
	Notes	; The authors want to express their thanks to the VITO personnel for their continuous support, especially B. Molenberghs, W. Doyen, H. Beckers (Separation and Conversion Technology, VITO), R. Kemps, M. Mertens, I. Thijs, M. Schoeters, W. Bouwen and J. Cooymans (Materials Department, VITO). C. Buysse thankfully acknowledges a PhD scholarship provided by VITO and the University of Antwerp. This work is performed in the framework of the German Helmholtz Alliance Project “MEM-BRAIN”, aiming at the development of gas separation membranes for zero-emission fossil fuel power plants. ;			Approved	Most recent IF: 6.035; 2010 IF: 3.673
	Call Number	UA @ admin @ c:irua:82008			Serial	5950
Permanent link to this record



	Author	Lorenz, H.; Zhao, Q.; Turner, S.; Lebedev, O.I.; Van Tendeloo, G.; Kloetzer, B.; Rameshan, C.; Pfaller, K.
	Title	Origin of different deactivation of Pd/SnO₂ and Pd/GeO₂ catalysts in methanol dehydrogenation and reforming: a comparative study			Type	A1 Journal article
	Year	2010	Publication	Applied catalysis : A : general	Abbreviated Journal	Appl Catal A-Gen
	Volume	381	Issue	1/2	Pages	242-252
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Pd particles supported on SnO2 and GeO2 have been structurally investigated by X-ray diffraction, (High-Resolution) transmission and scanning electron microscopy after different reductive treatments to monitor the eventual formation of bimetallic phases and catalytically tested in methanol dehydrogenation/ reforming. For both oxides this included a thin film sample with well-defined Pd particles and a powder catalyst prepared by incipient wetness impregnation. The hexagonal and the tetragonal polymorph were studied for powder GeO2. Pd2Ge formation was observed on all GeO2-supported catalysts, strongly depending on the specific sample used. Reduction of the thin film at 573K resulted in full transformation into the bimetallic state. The partial solubility of hexagonal GeO2 in water and its thermal structural instability yielded Pd2Ge formation at 473 K, at the cost of a structurally inhomogeneous support and Ge metal formation at higher reduction temperatures. Pd on tetragonal GeO2 entered a state of strong metalsupport interaction after reduction at 573673 K, resulting in coalescing Pd2Ge particles on a sintered and re-crystallized support, apparently partially covering the bimetallic particles and decreasing the catalytic activity. Pd2Ge on amorphous thin film and hexagonal GeO2 converted methanol primarily via dehydrogenation to CO and H2. At 573 K, formation of Pd2Sn and also PdSn occurred on the Pd/SnO2 thin film. Pd3Sn2 (and to some extent Pd2Sn) were predominantly obtained on the respective powder catalyst. Strong deactivation with increasing reduction temperature was observed, likely not based on the classical strong metalsupport interaction effect, but rather on a combination of missing active structural ensembles on Sn-enriched bimetallic phases and the formation of metallic -Sn. Correlations to Pd and its bimetallics supported on ZnO, Ga2O3 and In2O3 were also discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000279100700029	Publication Date	2010-04-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-860X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.339	Times cited	14	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 4.339; 2010 IF: 3.384
	Call Number	UA @ lucian @ c:irua:83927			Serial	2522
Permanent link to this record



	Author	Goffin, A.-L.; Duquesne, E.; Raquez, J.-M.; Miltner, H.E.; Ke, X.; Alexandre, M.; Van Tendeloo, G.; van Mele, B.; Dubois, P.
	Title	From polyester grafting onto POSS nanocage by ring-opening polymerization to high performance polyester/POSS nanocomposites			Type	A1 Journal article
	Year	2010	Publication	Journal of materials chemistry	Abbreviated Journal	J Mater Chem
	Volume	20	Issue	42	Pages	9415-9422
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Polyester-grafted polyhedral oligomeric silsesquioxane (POSS) nanohybrids selectively produced by ring-opening polymerization of ε-caprolactone and L,L-lactide (A.-L. Goffin, E. Duquesne, S. Moins, M. Alexandre, Ph. Dubois, Eur. Polym. Journal, 2007, 43, 4103) were studied as masterbatches by melt-blending within their corresponding commercial polymeric matrices, i.e., poly(ε-caprolactone) (PCL) and poly(L,L-lactide) (PLA). For the sake of comparison, neat POSS nanoparticles were also dispersed in PCL and PLA. The objective was to prepare aliphatic polyester-based nanocomposites with enhanced crystallization behavior, and therefore, enhanced thermo-mechanical properties. Wide-angle X-ray scattering and transmission electron microscopy attested for the dispersion of individualized POSS nanoparticles in the resulting nanocomposite materials only when the polyester-grafted POSS nanohybrid was used as a masterbatch. The large impact of such finely dispersed (grafted) nanoparticles on the crystallization behavior for the corresponding polyester matrices was noticed, as evidenced by differential scanning calorimetry analysis. Indeed, well-dispersed POSS nanoparticles acted as efficient nucleating sites, significantly increasing the crystallinity degree of both PCL and PLA matrices. As a result, a positive impact on thermo-mechanical properties was highlighted by dynamic mechanical thermal analysis.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000283264500017	Publication Date	2010-06-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0959-9428;1364-5501;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	42	Open Access
	Notes	Fwo; Iap-6			Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:85784			Serial	1284
Permanent link to this record



	Author	de Backer, J.W.; Vos, W.G.; Vinchurkar, S.C.; Claes, R.; Drollmann, A.; Wulfrank, D.; Parizel, P.M.; Germonpré, P.; de Backer, W.
	Title	Validation of computational fluid dynamics in CT-based airway models with SPECT/CT1			Type	A1 Journal article
	Year	2010	Publication	Radiology	Abbreviated Journal	Radiology
	Volume	257	Issue	3	Pages	854-862
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Vision lab; Antwerp Surgical Training, Anatomy and Research Centre (ASTARC); Laboratory Experimental Medicine and Pediatrics (LEMP)
	Abstract	Purpose: To compare the results obtained by using numerical flow simulations with the results of combined single photon emission computed tomography (SPECT) and computed tomography (CT) and to demonstrate the importance of correct boundary conditions for the numerical methods to account for the large amount of interpatient variability in airway geometry. Materials and Methods: This study was approved by all relevant institutional review boards. All patients gave their signed informed consent. In this study, six patients with mild asthma (three men; three women; overall mean age, 46 years ± 17 [standard deviation]) underwent CT at functional residual capacity and total lung capacity, as well as SPECT/CT. CT data were used for segmentation and computational fluid dynamics (CFD) simulations. A comparison was made between airflow distribution, as derived with (a) SPECT/CT through tracer concentration analysis, (b) CT through lobar expansion measurement, and (c) CFD through flow computer simulation. Also, the heterogeneity of the ventilation was examined. Results: Good agreement was found between SPECT/CT, CT, and CFD in terms of airflow distribution and hot spot detection. The average difference for the internal airflow distribution was less than 3% for CFD and CT versus SPECT/CT. Heterogeneity in ventilation patterns could be detected with SPECT/CT and CFD. Conclusion: This results of this study show that patient-specific computer simulations with appropriate boundary conditions yield information that is similar to that obtained with functional imaging tools, such as SPECT/CT.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000284469300031	Publication Date	2010-11-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0033-8419;1527-1315;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.296	Times cited	100	Open Access
	Notes	; Supported by Novartis. ;			Approved	Most recent IF: 7.296; 2010 IF: 6.069
	Call Number	UA @ lucian @ c:irua:85379			Serial	3831
Permanent link to this record



	Author	Biermans, E.; Molina, L.; Batenburg, K.J.; Bals, S.; Van Tendeloo, G.
	Title	Measuring porosity at the nanoscale by quantitative electron tomography			Type	A1 Journal article
	Year	2010	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	10	Issue	12	Pages	5014-5019
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Quantitative electron tomography is proposed to characterize porous materials at a nanoscale. To achieve reliable three-dimensional (3D) quantitative information, the influence of missing wedge artifacts and segmentation methods is investigated. We are presenting the Discrete Algebraic Reconstruction Algorithm as the most adequate tomography method to measure porosity at the nanoscale. It provides accurate 3D quantitative information, regardless the presence of a missing wedge. As an example, we applied our approach to nanovoids in La2Zr2O7 thin films.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000284990900040	Publication Date	2010-11-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	79	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 12.712; 2010 IF: 12.219
	Call Number	UA @ lucian @ c:irua:87658			Serial	1967
Permanent link to this record



	Author	Chen, Y.; Shanenko, A.A.; Peeters, F.M.
	Title	Hollow nanocylinder: multisubband superconductivity induced by quantum confinement			Type	A1 Journal article
	Year	2010	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	81	Issue	13	Pages	134523-134523:11
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Quantization of the transverse electron motion in high-quality superconducting metallic nanowires and nanofilms results in the formation of well-distinguished single-electron subbands. They shift in energy with changing thickness, which is known to cause quantum-size superconducting oscillations. The formation of multiple subbands results in a multigap structure induced by the interplay between quantum confinement and Andreev mechanism. We investigate multisubband superconductivity in a hollow nanocylinder by numerically solving the Bogoliubov-de Gennes equations. When changing the inner radius and thickness of the hollow nanocylinder, we find a crossover from an irregular pattern of quantum-size superconducting oscillations, typical of nanowires, to an almost regular regime, specific for superconducting nanofilms. At this crossover the multigap structure becomes degenerate. The ratio of the critical temperature to the energy gap increases and approaches its bulk value while being reduced by 20-30% due to Andreev-type states driven by quantum confinement in the irregular regime.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000277207900098	Publication Date	2010-04-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	21	Open Access
	Notes	; This work was supported by the Flemish Science Foundation (FWO-VI), the Interuniversity Attraction Poles Programme, Belgian States, Belgian Science Policy (IAP) and the ESF-AQDJJ network. ;			Approved	Most recent IF: 3.836; 2010 IF: 3.774
	Call Number	UA @ lucian @ c:irua:95623			Serial	1481
Permanent link to this record



	Author	Misko, V.R.; Bothner, D.; Kemmler, M.; Kleiner, R.; Koelle, D.; Peeters, F.M.; Nori, F.
	Title	Enhancing the critical current in quasiperiodic pinning arrays below and above the matching magnetic flux			Type	A1 Journal article
	Year	2010	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	82	Issue	18	Pages	184512-184512,7
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Quasiperiodic pinning arrays, as recently demonstrated theoretically and experimentally using a fivefold Penrose tiling, can lead to a significant enhancement of the critical current Ic as compared to traditional regular pinning arrays. However, while regular arrays showed only a sharp peak in Ic(Φ) at the matching flux Φ1 and quasiperiodic arrays provided a much broader maximum at Φ<Φ1, both types of pinning arrays turned out to be inefficient for fluxes larger than Φ1. We demonstrate theoretically and experimentally the enhancement of Ic(Φ) for Φ>Φ1 by using non-Penrose quasiperiodic pinning arrays. This result is based on a qualitatively different mechanism of flux pinning by quasiperiodic pinning arrays and could be potentially useful for applications in superconducting microelectronic devices operating in a broad range of magnetic fields.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000283923400006	Publication Date	2010-11-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	33	Open Access
	Notes	; This work was supported by the “Odysseus” Program of the Flemish Government and the Flemish Science Foundation (FWO-Vl), the Interuniversity Attraction Poles (IAP) Programme-Belgian State-Belgian Science Policy, the FWO-Vl, and by the DFG via SFB/TRR21. V. R. M. is grateful to the FWO-Vl for the support of the research stay at the DML (ASI, RIKEN), and to F. N. for hospitality. M. K. gratefully acknowledges support from the Carl-Zeiss-Stiftung, and D. B. from the Evangelisches Studienwerk e.V. Villigst. F. N. acknowledges partial support from the Laboratory of Physical Sciences, National Security Agency, Army Research Office, DARPA, AFOSR, National Science Foundation under Grant No. 0726909, JSPS-RFBR under Contract No. 09-02-92114, Grant-in-Aid for Scientific Research (S), MEXT Kakenhi on Quantum Cybernetics, and Funding Program for Innovative R&D on S&T (FIRST). ;			Approved	Most recent IF: 3.836; 2010 IF: 3.774
	Call Number	UA @ lucian @ c:irua:85800			Serial	1066
Permanent link to this record



	Author	Napierala, C.; Lepoittevin, C.; Edely, M.; Sauques, L.; Giovanelli, F.; Laffez, P.; Van Tendeloo, G.
	Title	Moderate pressure synthesis of rare earth nickelate with metal-insulator transition using polymeric precursors			Type	A1 Journal article
	Year	2010	Publication	Journal of solid state chemistry	Abbreviated Journal	J Solid State Chem
	Volume	183	Issue	7	Pages	1663-1669
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Rare earth nickelates exhibit a reversible metalsemiconductor phase transition that is, in the infrared range, responsible for a thermo-optical contrast. The state of the art synthesis of these compounds usually requires high oxygen pressure to stabilize Ni in the oxidation state 3+. In this work, using polymeric precursor associated with moderate pressure annealing, we show that it is possible to obtain fully oxidized rare earth nickelate with metalinsulator transition. Using thermogravimetric analysis, X-ray diffraction and transmission electronic microscopy we compare different samples synthesized at different oxygen pressures and demonstrate their structural similarity. Thermo-optical properties were measured, in the infrared range, using reflectance measurements and confirmed the metalinsulator transition at 60 °C in both samples.TEM observations lead to the conclusion that the structure commonly obtained at 175 bar is perfectly observed in the 20 bar sample without major structural defects. The two samples exhibit a thermochromic behavior and thermo-optical properties of the two samples are equivalent.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000279711200028	Publication Date	2010-05-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-4596;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.299	Times cited	3	Open Access
	Notes				Approved	Most recent IF: 2.299; 2010 IF: 2.261
	Call Number	UA @ lucian @ c:irua:83679			Serial	2156
Permanent link to this record



	Author	Delville, R.; Kasinathan, S.; Zhang, Z.; van Humbeeck, J.; James, R.D.; Schryvers, D.
	Title	Transmission electron microscopy study of phase compatibility in low hysteresis shape memory alloys			Type	A1 Journal article
	Year	2010	Publication	Philosophical magazine	Abbreviated Journal	Philos Mag
	Volume	90	Issue	1/4	Pages	177-195
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Recent findings have linked low hysteresis in shape memory alloys with phase compatibility between austenite and martensite. To investigate the evolution of microstructure as phase compatibility increases and hysteresis is reduced, transmission electron microscopy was used to study the alloy system Ti50Ni50xPdx, where the composition is systemically tuned to approach perfect compatibility. Changes in morphology, twinning density and twinning modes are reported, along with special microstructures occurring when compatibility is achieved. In addition, the interface between austenite and a single variant of martensite was studied by high-resolution and conventional electron microscopy. The low energy configuration of the interface detailed in this article suggests that it plays an important role in the lowering of hysteresis compared to classical habit plane interfaces.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000274576500013	Publication Date	2010-01-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-6435;1478-6443;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.505	Times cited	70	Open Access
	Notes	Multimat; FWO			Approved	Most recent IF: 1.505; 2010 IF: 1.304
	Call Number	UA @ lucian @ c:irua:79859			Serial	3718
Permanent link to this record



	Author	Zha, G.-Q.; Covaci, L.; Zhou, S.-P.; Peeters, F.M.
	Title	Proximity-induced pseudogap in mesoscopic superconductor/normal-metal bilayers			Type	A1 Journal article
	Year	2010	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	82	Issue	14	Pages	140502-140502,4
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Recent scanning tunneling microscopy (STM) measurements of the proximity effect in Au/La2−xSrxCuO4 and La1.55Sr0.45CuO4/La2−xSrxCuO4 bilayers showed a proximity-induced pseudogap [O. Yuli, I. Asulin, Y. Kalcheim, G. Koren, and O. Millo, Phys. Rev. Lett. 103, 197003 (2009)]. We describe the proximity effect in mesoscopic superconductor/normal-metal bilayers by using the Bogoliubov-de Gennes equations for a tight-binding Hamiltonian with competing antiferromagnetic and d-wave superconductivity orders. The temperature-dependent local density of states is calculated as a function of the distance from the interface. Bound state due to both d-wave and spin-density wave gaps are formed in the normal metal for energies less than the respective gaps. If there is a mismatch between the Fermi velocities in the two layers we observe that these states will shift in energy when spin-density wave order is present, thus inducing a minigap at finite energy. We conclude that the STM measurement in the proximity structures is able to distinguish between the two scenarios proposed for the pseudogap (competing or precursor to superconductivity).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000282507200002	Publication Date	2010-10-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	7	Open Access
	Notes	; This work was supported by the Flemish Science Foundation (FWO-Vl), by Belgian Science Policy (IAP), by National Natural Science Foundation of China under Grants No. 10904089 and No. 60971053, by the Research Fund of Higher Education of China under Grant No. 20093108120005, by Shanghai Leading Academic Discipline project under Grant No. S30105, by Science and Technology Committee of Shanghai Municipal under Grant No. 09JC1406000, by Shanghai Municipal Education Committee under Grants No. shu-08053 and No. 10zz63, and by Innovation Funds of Shanghai University. ;			Approved	Most recent IF: 3.836; 2010 IF: 3.774
	Call Number	UA @ lucian @ c:irua:85028			Serial	2735
Permanent link to this record



	Author	Vandenberghe, W.; Sorée, B.; Magnus, W.; Groeseneken, G.
	Title	Zener tunneling in semiconductors under nonuniform electric fields			Type	A1 Journal article
	Year	2010	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	107	Issue	5	Pages	054520,1-054520,7
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Recently, a renewed interest in Zener tunneling has arisen because of its increasing impact on semiconductor device performance at nanometer dimensions. In this paper we evaluate the tunnel probability under the action of a nonuniform electric field using a two-band model and arrive at significant deviations from the commonly used Kanes model, valid for weak uniform fields only. A threshold on the junction bias where Kanes model for Zener tunneling breaks down is determined. Comparison with Kanes model particularly shows that our calculation yields a higher tunnel probability for intermediate electric fields and a lower tunnel probability for high electric fields. When performing a current calculation comparing to the WKB approximation for the case of an abrupt p-n junction significant differences concerning the shape of the I-V curve are demonstrated.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000275657500136	Publication Date	2010-03-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	22	Open Access
	Notes	; William Vandenberghe gratefully acknowledges the support of a Ph. D. stipend from the Institute for the Promotion of Innovation through Science and Technology in Flanders (IWT-Vlaanderen). These authors acknowledge the support from IMEC's Industrial Affiliation Program and the authors would like to thank Anne Verhulst for useful comments. ;			Approved	Most recent IF: 2.068; 2010 IF: 2.079
	Call Number	UA @ lucian @ c:irua:82450			Serial	3929
Permanent link to this record



	Author	Ang, F.; Van Passel, S.
	Title	The sustainable value approach : a clarifying and constructive comment			Type	A1 Journal article
	Year	2010	Publication	Ecological Economics	Abbreviated Journal	Ecol Econ
	Volume	69	Issue	12	Pages	2303-2306
	Keywords	A1 Journal article; Economics
	Abstract	Recently, the original benchmarking methodology of the Sustainable Value approach became subjected to serious debate. While Kuosmanen and Kuosmanen (2009b) critically question its validity introducing productive efficiency theory, Figge and Hahn (2009) put forward that the implementation of productive efficiency theory severely conflicts with the original financial economics perspective of the Sustainable Value approach. We argue that the debate is very confusing because the original Sustainable Value approach presents two largely incompatible objectives. Nevertheless, we maintain that both ways of benchmarking could provide useful and moreover complementary insights. If one intends to present the overall resource efficiency of the firm from the investor's viewpoint, we recommend the original benchmarking methodology. If one on the other hand aspires to create a prescriptive tool setting up some sort of reallocation scheme, we advocate implementation of the productive efficiency theory. Although the discussion on benchmark application is certainly substantial, we should avoid the debate to become accordingly narrowed. Next to the benchmark concern, we see several other challenges considering the development of the Sustainable Value approach: (1) a more systematic resource selection, (2) the inclusion of the value chain and (3) additional analyses related to policy in order to increase interpretative power.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000283700900001	Publication Date	2010-07-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-8009; 1873-6106	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles; WoS full record; WoS citing articles
	Impact Factor	2.965	Times cited	18	Open Access
	Notes	; ;			Approved	Most recent IF: 2.965; 2010 IF: 2.754
	Call Number	UA @ admin @ c:irua:136760			Serial	6258
Permanent link to this record



	Author	Swaenen, M.; Stefaniak, E.A.; Frost, R.; Worobiec, A.; Van Grieken, R.
	Title	Investigation of inclusions trapped inside Libyan desert glass by Raman microscopy			Type	A1 Journal article
	Year	2010	Publication	Analytical and bioanalytical chemistry	Abbreviated Journal
	Volume	397	Issue	7	Pages	2659-2665
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation); Laboratory Experimental Medicine and Pediatrics (LEMP)
	Abstract	Several specimens of Libyan desert glass (LDG), an enigmatic natural glass from Egypt, were subjected to investigation by micro-Raman spectroscopy. The spectra of inclusions inside the LDG samples were successfully measured through the layers of glass and the mineral species were identified on this basis. The presence of cristobalite as typical for high-temperature melt products was confirmed, together with co-existing quartz. TiO2 was determined in two polymorphic species rutile and anatase. Micro-Raman spectroscopy proved also the presence of minerals unusual for high-temperature glasses such as anhydrite and aragonite.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000280122100004	Publication Date	2010-01-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1618-2642; 1618-2650	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:83276			Serial	8125
Permanent link to this record



	Author	Xu, T.; Nys, J.-P.; Addad, A.; Lebedev, O.I.; Urbieta, A.; Salhi, B.; Berthe, M.; Grandidier, B.; Stievenard, D.
	Title	Faceted sidewalls of silicon nanowires: Au-induced structural reconstructions and electronic properties			Type	A1 Journal article
	Year	2010	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	81	Issue	11	Pages	115403,1-115403,10
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Si nanowires with a ⟨111⟩ orientation, synthesized by vapor-liquid-solid process with low silane partial pressure reactant and gold as the catalyst, are known to exhibit sawtooth facets containing gold adsorbates. We report herein the study of the nanowire morphology by means of transmission electron microscopy and scanning tunneling microscopy. The nanowires consist of faceted sidewalls. The number of the sidewalls changes from 12 to 6 along the growth axis, giving rise to nanowires with an irregular hexagonal cross section at their base. The sidewalls are covered with Au-rich clusters. Their facets also exhibit atomic structures that reveal the presence of gold, resulting from the diffusion of gold during the growth. Based on these observations, the tapering of the nanowire is found to be related to two contributions: the reduction in the catalyst particle size during the growth and lateral overgrowth from the direct incorporation of Si species onto the nanowire sidewalls. Because the rearrangement of atoms at surfaces and interfaces might affect the growth kinetics, the trigonal symmetry as well as the higher lateral growth rate on the widest sidewalls are explained from the existence of an interfacial atomic structure with two inequivalent parts in the unit cell. Finally, spectroscopic measurements were performed on the major facets and revealed a metallic behavior at 77 K.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000276248800116	Publication Date	2010-03-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	42	Open Access
	Notes				Approved	Most recent IF: 3.836; 2010 IF: 3.774
	Call Number	UA @ lucian @ c:irua:82273			Serial	1168
Permanent link to this record



	Author	Brosens, F.; Magnus, W.
	Title	Newtonian trajectories : a powerful tool for solving quantum dynamics			Type	A1 Journal article
	Year	2010	Publication	Solid state communications	Abbreviated Journal	Solid State Commun
	Volume	150	Issue	43/44	Pages	2102-2105
	Keywords	A1 Journal article; Theory of quantum systems and complex systems; Condensed Matter Theory (CMT)
	Abstract	Since Ehrenfests theorem, the role and importance of classical paths in quantum dynamics have been examined by several means. Along this line, we show that the classical equations of motion provide a solution to quantum dynamics, if appropriately incorporated into the Wigner distribution function, exactly reformulated in a type of Boltzmann equation. Also the quantum-mechanical features of the canonical ensemble can be studied in this framework of Newtonian dynamics, if the initial distribution function is appropriately constructed from the statistical operator.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000284251700006	Publication Date	2010-09-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0038-1098;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.554	Times cited	7	Open Access
	Notes	; The authors thank J.T. Devreese and J. Tempere for interesting and helpful discussions, and, in particular, L.F. Lemmens for several valuable suggestions. One of the authors (F.B.) acknowledges the FWO projects G.0115.06 and G.0365.08 as well as the WOG project WO.033.09N, for financial support. ;			Approved	Most recent IF: 1.554; 2010 IF: 1.981
	Call Number	UA @ lucian @ c:irua:85795			Serial	2338
Permanent link to this record



	Author	Tkachenko, D.V.; Misko, V.R.; Peeters, F.M.
	Title	Effect of correlated noise on quasi-one-dimensional diffusion			Type	A1 Journal article
	Year	2010	Publication	Physical review : E : statistical physics, plasmas, fluids, and related interdisciplinary topics	Abbreviated Journal	Phys Rev E
	Volume	82	Issue	5	Pages	051102-051102,5
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Single-file diffusion (SFD) of an infinite one-dimensional chain of interacting particles has a long-time mean-square displacement ∝t1/2, independent of the type of interparticle repulsive interaction. This behavior is also observed in finite-size chains, although only for certain intervals of time t depending on the chain length L, followed by the ∝t for t→∞, as we demonstrate for a closed circular chain of diffusing interacting particles. Here, we show that spatial correlation of noise slows down SFD and can result, depending on the amount of correlated noise, in either subdiffusive behavior ∝tα, where 0<α<1/2, or even in a total suppression of diffusion (in the limit N→∞). Spatial correlation can explain the subdiffusive behavior in recent SFD experiments in circular channels.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000283710100001	Publication Date	2010-11-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1539-3755;1550-2376;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.366	Times cited	11	Open Access
	Notes	; We acknowledge discussions with M. Saint-Jean. This work was supported by the “Odysseus” program of the Flemish Government and the Flemish Science Foundation (FWO-VI). ;			Approved	Most recent IF: 2.366; 2010 IF: 2.352
	Call Number	UA @ lucian @ c:irua:85799			Serial	806
Permanent link to this record



	Author	Cambré, S.; Schoeters, B.; Luyckx, S.; Goovaerts, E.; Wenseleers, W.
	Title	Experimental observation of single-file water filling of thin single-wall carbon nanotubes down to chiral index (5,3)			Type	A1 Journal article
	Year	2010	Publication	Physical review letters	Abbreviated Journal	Phys Rev Lett
	Volume	104	Issue	20	Pages	207401,1-207401,4
	Keywords	A1 Journal article; Particle Physics Group; Nanostructured and organic optical and electronic materials (NANOrOPT); Condensed Matter Theory (CMT)
	Abstract	Single-file transport of water into carbon nanotubes is experimentally demonstrated for the first time through the splitting of the radial breathing mode (RBM) vibration in Raman spectra of bile salt solubilized tubes when both empty (closed) and water-filled (open-ended) tubes are present. D2O filling is observed for a wide range of diameters, d, down to very thin tubes [e.g., (5,3) tube, d=0.548 nm] for which only a single water molecule fits in the cross section of the internal nanotube channel. The shift in RBM frequency upon filling is found to display a very complex dependence on nanotube diameter and chirality, in support of a different yet well-defined ordering and orientation of water molecules at room temperature. Large shifts of the electronic transitions are also observed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000277945900051	Publication Date	2010-05-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0031-9007;1079-7114;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.462	Times cited	140	Open Access
	Notes	; Financial support from the Fund for Scientific Research Flanders, Belgium (FWO-Vlaanderen) (Project No. G.0129.07), is gratefully acknowledged. ;			Approved	Most recent IF: 8.462; 2010 IF: 7.622
	Call Number	UA @ lucian @ c:irua:83383			Serial	1141
Permanent link to this record



	Author	Bekermann, D.; Gasparotto, A.; Barreca, D.; Bovo, L.; Devi, A.; Fischer, R.A.; Lebedev, O.I.; Maccato, C.; Tondello, E.; Van Tendeloo, G.
	Title	Highly oriented ZnO nanorod arrays by a novel plasma chemical vapor deposition process			Type	A1 Journal article
	Year	2010	Publication	Crystal growth & design	Abbreviated Journal	Cryst Growth Des
	Volume	10	Issue	4	Pages	2011-2018
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Strongly c-axis oriented ZnO nanorod arrays were grown on Si(100) by plasma enhanced-chemical vapor deposition (PE-CVD) starting from two volatile bis(ketoiminato) zinc(II) compounds Zn[(R′)NC(CH3)═C(H)C(CH3)═O]2, with R′ = -(CH2)xOCH3 (x = 2, 3). A systematic investigation of process parameters enabled us to obtain the selective formation of ZnO nanorods with tailored features, and provided an important insight into their growth mechanism. The morphology, structure, and composition of the synthesized ZnO nanosystems were thoroughly analyzed by field emission-scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDXS), glancing incidence X-ray diffraction (GIXRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Photoluminescence (PL) measurements were carried out to gain information on the optical properties. Specifically, one-dimensional (1D) ZnO architectures could be grown on Si(100) substrates at temperatures as low as 200−300 °C and radio frequency (RF)-power values of 20 W, provided that a sufficiently high mass supply to the growth surface was maintained. To the best of our knowledge, the present work reports the mildest preparation conditions ever appeared in the literature for the PE-CVD of ZnO nanorods, a key result in view of potential large-scale technological applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000276234500080	Publication Date	2010-03-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1528-7483;1528-7505;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.055	Times cited	75	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 4.055; 2010 IF: 4.390
	Call Number	UA @ lucian @ c:irua:82311			Serial	1472
Permanent link to this record



	Author	Zhao, Q.; Lorenz, H.; Turner, S.; Lebedev, O.I.; Van Tendeloo, G.; Rameshan, C.; Klötzer, B.; Konzett, J.; Penner, S.
	Title	Catalytic characterization of pure SnO₂ and GeO₂ in methanol steam reforming			Type	A1 Journal article
	Year	2010	Publication	Applied catalysis : A : general	Abbreviated Journal	Appl Catal A-Gen
	Volume	375	Issue	2	Pages	188-195
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Structural changes of a variety of different SnO, SnO2 and GeO2 catalysts upon reduction in hydrogen were correlated with associated catalytic changes in methanol steam reforming. Studied systems include SnO, SnO2 and GeO2 thin film model catalysts prepared by vapour phase deposition and growth on polycrystalline NaCl surfaces and, for comparison, the corresponding pure oxide powder catalysts. Reduction of both the SnO2 thin film and powder at around 673 K in 1 bar hydrogen leads to a substantial reduction of the bulk structure and yields a mixture of SnO2 and metallic β-Sn. On the powder catalyst this transformation is fully reversible upon oxidation in 1 bar O2 at 673 K. Strongly reduced thin films, however, can only be re-transformed to SnO2 if the reduction temperature did not exceed 573 K. For GeO2, the situation is more complex due to its polymorphism. Whereas the tetragonal phase is structurally stable during reduction, oxidation or catalytic reaction, a small part of the hexagonal phase is always transformed into the tetragonal at 673 K independent of the gas phase used. SnO2 is highly active and CO2 selective in methanol steam reforming, but the initial high activity drops considerably upon reduction between 373 and 573 K and almost complete catalyst deactivation is observed after reduction at 673 K, which is associated with the parallel formation of β-Sn. In close correlation to the structural results, the catalytic activity and selectivity can be restored upon an oxidative catalyst regeneration at 673 K. Tetragonal GeO2 exhibits only a small activity and no pronounced selectivity to either CO or CO2, at least after reduction. In its fully oxidized state release of surface/lattice oxygen results in a non-catalytic formation of CO2 by oxidation of CO originating from catalytic dehydrogenation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000275580600002	Publication Date	2010-01-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-860X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.339	Times cited	20	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 4.339; 2010 IF: 3.384
	Call Number	UA @ lucian @ c:irua:81741			Serial	292
Permanent link to this record



	Author	Lorenz, H.; Zhao, Q.; Turner, S.; Lebedev, O.I.; Van Tendeloo, G.; Klötzer, B.; Rameshan, C.; Penner, S.
	Title	Preparation and structural characterization of SnO₂ and GeO₂ methanol steam reforming thin film model catalysts by (HR)TEM			Type	A1 Journal article
	Year	2010	Publication	Materials chemistry and physics	Abbreviated Journal	Mater Chem Phys
	Volume	122	Issue	2/3	Pages	623-629
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Structure, morphology and composition of different tin oxide and germanium oxide thin film catalysts for the methanol steam reforming (MSR) reaction have been studied by a combination of (high-resolution) transmission electron microscopy, selected area electron diffraction, dark-field imaging and electron energy-loss spectroscopy. Deposition of the thin films on NaCl(0 0 1) cleavage faces has been carried out by thermal evaporation of the respective SnO2 and GeO2 powders in varying oxygen partial pressures and at different substrate temperatures. Preparation of tin oxide films in high oxygen pressures (10−1 Pa) exclusively resulted in SnO phases, at and above 473 K substrate temperature epitaxial growth of SnO on NaCl(0 0 1) leads to well-ordered films. For lower oxygen partial pressures (10−3 to 10−2 Pa), mixtures of SnO and β-Sn are obtained. Well-ordered SnO2 films, as verified by electron diffraction patterns and energy-loss spectra, are only obtained after post-oxidation of SnO films at temperatures T ≥ 673 K in 105 Pa O2. Preparation of GeOx films inevitably results in amorphous films with a composition close to GeO2, which cannot be crystallized by annealing treatments in oxygen or hydrogen at temperatures comparable to SnO/SnO2. Similarities and differences to neighbouring oxides relevant for selective MSR in the third group of the periodic system (In2O3 and Ga2O3) are also discussed with the aim of cross-correlation in formation of nanomaterials, and ultimately, also catalytic properties.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000278637900054	Publication Date	2010-04-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0254-0584;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.084	Times cited	15	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 2.084; 2010 IF: 2.356
	Call Number	UA @ lucian @ c:irua:83099			Serial	2699
Permanent link to this record



	Author	Bekermann, D.; Gasparotto, A.; Barreca, D.; Devi, A.; Fischer, R.A.; Kete, M.; Štangar, U.L.; Lebedev, O.I.; Maccato, C.; Tondello, E.; Van Tendeloo, G.
	Title	ZnO nanorod arrays by plasma-enhanced CVD for light-activated functional applications			Type	A1 Journal article
	Year	2010	Publication	ChemPhysChem : a European journal of chemical physics and physical chemistry	Abbreviated Journal	Chemphyschem
	Volume	11	Issue	11	Pages	2337-2340
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Switch of the surface properties: Supported ZnO nanorod arrays with tailored roughness and aspect ratios are successfully synthesized by plasma-enhanced chemical vapor deposition. Such nanostructures exhibit significant superhydrophilic and photocatalytic properties tunable as a function of their morphological organization (see picture). This renders them promising building blocks for the fabrication of stimuli-responsive materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000281061500008	Publication Date	2010-06-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1439-4235;1439-7641;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.075	Times cited	38	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 3.075; 2010 IF: 3.340
	Call Number	UA @ lucian @ c:irua:84594			Serial	3935
Permanent link to this record



	Author	Paulussen, S.; Verheyde, B.; Tu, X.; De Bie, C.; Martens, T.; Petrovic, D.; Bogaerts, A.; Sels, B.
	Title	Conversion of carbon dioxide to value-added chemicals in atmospheric pressure dielectric barrier discharges			Type	A1 Journal article
	Year	2010	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	19	Issue	3	Pages	034015,1-034015,6
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The aim of this work consists of the evaluation of atmospheric pressure dielectric barrier discharges for the conversion of greenhouse gases into useful compounds. Therefore, pure CO2 feed flows are administered to the discharge zone at varying discharge frequency, power input, gas temperature and feed flow rates, aiming at the formation of CO and O2. The discharge obtained in CO2 is characterized as a filamentary mode with a microdischarge zone in each half cycle of the applied voltage. It is shown that the most important parameter affecting the CO2-conversion levels is the gas flow rate. At low flow rates, both the conversion and the CO-yield are significantly higher. In addition, also an increase in the gas temperature and the power input give rise to higher conversion levels, although the effect on the CO-yield is limited. The optimum discharge frequency depends on the power input level and it cannot be unambiguously stated that higher frequencies give rise to increased conversion levels. A maximum CO2 conversion of 30% is achieved at a flow rate of 0.05 L min−1, a power density of 14.75 W cm−3 and a frequency of 60 kHz. The most energy efficient conversions are achieved at a flow rate of 0.2 L min−1, a power density of 11 W cm−3 and a discharge frequency of 30 kHz.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000277982800016	Publication Date	2010-05-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	116	Open Access
	Notes				Approved	Most recent IF: 3.302; 2010 IF: 2.218
	Call Number	UA @ lucian @ c:irua:82408			Serial	512
Permanent link to this record



	Author	Yiu, H.H.P.; Niu, H.-jun; Biermans, E.; Van Tendeloo, G.; Rosseinsky, M.J.
	Title	Designed multifunctional nanocomposites for biomedical applications			Type	A1 Journal article
	Year	2010	Publication	Advanced functional materials	Abbreviated Journal	Adv Funct Mater
	Volume	20	Issue	10	Pages	1599-1609
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The assembly of multifunctional nanocomposite materials is demonstrated by exploiting the molecular sieving property of SBA-16 nanoporous silica and using it as a template material. The cages of the pore networks are used to host iron oxide magnetic nanoparticles, leaving a pore volume of 0.29 cm3 g-1 accessible for drug storage. This iron oxide-silica nanocomposite is then functionalized with amine groups. Finally the outside of the particle is decorated with antibodies. Since the size of many protein molecules, including that of antibodies, is too large to enter the pore system of SBA-16, the amine groups inside the pores are preserved for drug binding. This is proven using a fluorescent protein, fluorescein-isothiocyanate-labeled bovine serum albumin (FITC-BSA), with the unreacted amine groups inside the pores dyed with rhodamine B isothiocyanate (RITC). The resulting nanocomposite material offers a dual-targeting drug delivery mechanism, i.e., magnetic and antibody-targeting, while the functionalization approach is extendable to other applications, e.g., fluorescence-magnetic dual-imaging diagnosis.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000278597100008	Publication Date	2010-04-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1616-301X;1616-3028;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.124	Times cited	56	Open Access
	Notes				Approved	Most recent IF: 12.124; 2010 IF: 8.508
	Call Number	UA @ lucian @ c:irua:83298			Serial	662
Permanent link to this record



	Author	Titantah, J.T.; Lamoen, D.; Schowalter, M.; Rosenauer, A.
	Title	Ab initio based atomic scattering amplitudes and {002} electron structure factors of In_xGa_1-xAs/GaAs quantum wells			Type	A1 Journal article
	Year	2010	Publication	Journal of physics : conference series	Abbreviated Journal
	Volume	209	Issue	1	Pages	012040,1-012040,6
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The atomic scattering amplitudes of the various atoms of the systems Ga1−xInxAs, GaAs1−xNx and InAs1−xNx are calculated using the density functional theory (DFT) approach. The scattering amplitudes of N, Ga, As and In in the model systems are compared with the frequently used Doyle and Turner values. Deviation from the latter values is found for small scattering vectors (s<0.3Å−1) and for these scattering vectors dependence on the orientation of the scattering vector and the chemical environment is reported. We suggest a parametrization of these modified scattering amplitudes (MASAs) for small scattering vectors (s<1.0Å−1). The MASAs are exploited within zero pressure classical Metropolis Monte Carlo (MC), finite temperature calculations to investigate the effect of quantum well size on the electron {002} structure factor (SF) of Ga1−xInxAs quantum wells.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000283739100040	Publication Date	2010-02-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1742-6596;	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:85760			Serial	28
Permanent link to this record



	Author	Földi, P.; Szaszkó-Bogár, V.; Peeters, F.M.
	Title	Spin-orbit interaction controlled properties of two-dimensional superlattices			Type	A1 Journal article
	Year	2010	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	82	Issue	11	Pages	115302-115302,4
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	The band structure of two-dimensional artificial superlattices in the presence of (Rashba-type) spin-orbit interaction (SOI) is presented. The position and shape of the energy bands in these spintronic crystals depend on the geometry as well as the strength of the SOI, which can be tuned by external gate voltages. For finite mesoscopic arrays, we show that their conductance properties and possible applications can be understood from these spin-dependent band diagrams.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000281516300005	Publication Date	2010-09-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	6	Open Access
	Notes	; We thank M. G. Benedict and F. Bartha for useful discussions. This work was supported by the Flemish Science Foundation (FWO-Vl), the Belgian Science Policy (IAP) and the Hungarian Scientific Research Fund (OTKA) under Contracts No. T81364 and No. M045596. P.F. was supported by a J. Bolyai grant of the Hungarian Academy of Sciences. ;			Approved	Most recent IF: 3.836; 2010 IF: 3.774
	Call Number	UA @ lucian @ c:irua:84259			Serial	3092
Permanent link to this record



	Author	Shanenko, A.A.; Croitoru, M.D.; Vagov, A.; Peeters, F.M.
	Title	Giant drop in the Bardeen-Cooper-Schrieffer coherence length induced by quantum size effects in superconducting nanowires			Type	A1 Journal article
	Year	2010	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	82	Issue	10	Pages	104524-104524,6
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	The BCS coherence length in low-dimensional superconductors is dramatically modified by quantum-size effects. In particular, for nanowires made of conventional superconducting materials, we show that the longitudinal zero-temperature coherence length exhibits width-dependent drops by 23 orders of magnitude each time when the bottom of one of single-electron subbands formed due to the transverse quantization of electron motion is situated in a close vicinity to the Fermi level. This phenomenon has strong similarities to the well-known BCS-BEC (Bose-Einstein condensation) crossover in ultracold fermionic condensates but with an important exception: it is driven by the transverse quantization of the electron motion rather than by the externally controlled strength of the fermion-fermion interaction.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000282269600005	Publication Date	2010-09-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	29	Open Access
	Notes	; This work was supported by the Flemish Science Foundation (FWO-Vl), the Belgian Science Policy (IAP), and the ESF-network: INSTANS. M. D. C. acknowledges support from the Alexander von Humboldt Foundation. A. A. S. thanks R. G. Mints, W. V. Pogosov, D. Y. Vodolazov, A. Perali, and A. Bianconi for fruitful discussions. ;			Approved	Most recent IF: 3.836; 2010 IF: 3.774
	Call Number	UA @ lucian @ c:irua:85419			Serial	1337
Permanent link to this record