NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	1–30 of 82 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 >>

List View

Citations

Details

	Records
	Author	Burriel, M.; Santiso, J.; Rossell, M.D.; Van Tendeloo, G.; Figueras, A.; Garcia, G.
	Title	Enhancing total conductivity of La₂NiO_4+\delta epitaxial thin films by reducing thickness			Type	A1 Journal article
	Year	2008	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	112	Issue	29	Pages	10982-10987
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	High quality epitaxial c axis oriented La2NiO4+ä thin films have been prepared by the pulsed injection metal organic chemical vapor deposition technique on different substrates. High-resolution electron microscopy/transmission electron microscopy has been used to confirm the high crystalline quality of the deposited films. The c-parameter evolution has been studied by XRD as a function of time and gas atmosphere. The high temperature transport properties along the basal a−b plane of epitaxial La2NiO4+ä films have been measured, and the total conductivity of the layers has been found to increase as the thickness is reduced. Layers of 50 nm and thinner have shown a maximum conductivity larger than that measured for single-crystals, in particular, the 33 nm thick films with a conductivity of 475 S/cm in oxygen correspond to the highest value measured to date for this material.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000257724100057	Publication Date	2008-06-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	35	Open Access
	Notes				Approved	Most recent IF: 4.536; 2008 IF: 3.396
	Call Number	UA @ lucian @ c:irua:76440			Serial	1067
Permanent link to this record



	Author	Neyts, E.C.; Bogaerts, A.
	Title	Numerical study of the size-dependent melting mechanisms of nickel nanoclusters			Type	A1 Journal article
	Year	2009	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	113	Issue	7	Pages	2771-2776
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Molecular dynamics simulations were used to investigate the size-dependent melting mechanism of nickel nanoclusters of various sizes. The melting process was monitored by the caloric curve, the overall cluster Lindemann index, and the atomic Lindemann index. Size-dependent melting temperatures were determined, and the correct linear dependence on inverse diameter was recovered. We found that the melting mechanism gradually changes from dynamic coexistence melting to surface melting with increasing cluster size. These findings are of importance in better understanding carbon nanotube growth by catalytic chemical vapor deposition as the phase state of the catalyst nanoparticle codetermines the growth mechanism.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited		Open Access
	Notes				Approved	Most recent IF: 4.536; 2009 IF: 4.224
	Call Number	UA @ lucian @ c:irua:76495			Serial	2410
Permanent link to this record



	Author	Wendelen, W.; Dzhurakhalov, A.A.; Peeters, F.M.; Bogaerts, A.
	Title	Combined molecular dynamics: continuum study of phase transitions in bulk metals under ultrashort pulsed laser irradiation			Type	A1 Journal article
	Year	2010	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	114	Issue	12	Pages	5652-5660
	Keywords	A1 Journal article; Integrated Molecular Plant Physiology Research (IMPRES); Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The phase transition processes induced by ultrashort, 100 fs pulsed laser irradiation of Au, Cu, and Ni are studied by means of a combined atomistic-continuum approach. A moderately low absorbed laser fluence range, from 200 to 600 J/m2 is considered to study phase transitions by means of a local and a nonlocal order parameter. At low laser fluences, the occurrence of layer-by-layer evaporation has been observed, which suggests a direct solid to vapor transition. The calculated amount of molten material remains very limited under the conditions studied, especially for Ni. Therefore, our results show that a kinetic equation that describes a direct solid to vapor transition might be the best approach to model laser-induced phase transitions by continuum models. Furthermore, the results provide more insight into the applicability of analytical superheating theories that were implemented in continuum models and help the understanding of nonequilibrium phase transitions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000275855600044	Publication Date	2010-01-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	2	Open Access
	Notes	; A.D. gratefully acknowledges Professor M. Hot (ULB, Brussels) for the basic MD-code that was modified further for the laser-induced melting processes. W.W, and A.D. are thankful to Professor L.V. Zhigilei for useful discussions and advices. The calculations were performed on the CALCUA computing facility of the University of Antwerp. This work was supported by the Belgian Science Policy (IAP). ;			Approved	Most recent IF: 4.536; 2010 IF: 4.524
	Call Number	UA @ lucian @ c:irua:81391			Serial	402
Permanent link to this record



	Author	Ao, Z.M.; Peeters, F.M.
	Title	Electric field activated hydrogen dissociative adsorption to nitrogen-doped graphene			Type	A1 Journal article
	Year	2010	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	114	Issue	34	Pages	14503-14509
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Graphane, hydrogenated graphene, was very recently synthesized and predicted to have great potential applications. In this work, we propose a new promising approach for hydrogenation of graphene based on density functional theory (DFT) calculations through the application of a perpendicular electric field after substitutionally doping by nitrogen atoms. These DFT calculations show that the doping by nitrogen atoms into the graphene layer and applying an electrical field normal to the graphene surface induce dissociative adsorption of hydrogen. The dissociative adsorption energy barrier of an H2 molecule on a pristine graphene layer changes from 2.7 to 2.5 eV on N-doped graphene, and to 0.88 eV on N-doped graphene under an electric field of 0.005 au. When increasing the electric field above 0.01 au, the reaction barrier disappears. Therefore, N doping and applying an electric field have catalytic effects on the hydrogenation of graphene, which can be used for hydrogen storage purposes and nanoelectronic applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000281129100027	Publication Date	2010-08-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	110	Open Access
	Notes	; This work was supported by the Flemish Science Foundation (FWO-VI) and the Belgian Science Policy (IAP). ;			Approved	Most recent IF: 4.536; 2010 IF: 4.524
	Call Number	UA @ lucian @ c:irua:84588			Serial	882
Permanent link to this record



	Author	Bittencourt, C.; Navio, C.; Nicolay, A.; Ruelle, B.; Godfroid, T.; Snyders, R.; Colomer, J.-F.; Lagos, M.J.; Ke, X.; Van Tendeloo, G.; Suarez-Martinez, I.; Ewels, C.P.
	Title	Atomic oxygen functionalization of vertically aligned carbon nanotubes			Type	A1 Journal article
	Year	2011	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	115	Issue	42	Pages	20412-20418
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Vertically aligned multiwalled carbon nanotubes (v-MWCNTs) are functionalized using atomic oxygen generated in a microwave plasma. X-ray photoelectron spectroscopy depth profile analysis shows that the plasma treatment effectively grafts oxygen exclusively at the v-MWCNT tips. Electron microscopy shows that neither the vertical alignment nor the structure of v-MWCNTs were affected by the plasma treatment. Density functional calculations suggest assignment of XPS C 1s peaks at 286.6 and 287.5 eV, to epoxy and carbonyl functional groups, respectively.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000296205600009	Publication Date	2011-10-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	31	Open Access
	Notes	Iap			Approved	Most recent IF: 4.536; 2011 IF: 4.805
	Call Number	UA @ lucian @ c:irua:91890			Serial	174
Permanent link to this record



	Author	Khalilov, U.; Neyts, E.C.; Pourtois, G.; van Duin, A.C.T.
	Title	Can we control the thickness of ultrathin silica layers by hyperthermal silicon oxidation at room temperature?			Type	A1 Journal article
	Year	2011	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	115	Issue	50	Pages	24839-24848
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Using reactive molecular dynamics simulations by means of the ReaxFF potential, we studied the growth mechanism of ultrathin silica (SiO2) layers during hyperthermal oxidation at room temperature. Oxidation of Si(100){2 × 1} surfaces by both atomic and molecular oxygen was investigated in the energy range 15 eV. The oxidation mechanism, which differs from thermal oxidation, is discussed. In the case of oxidation by molecular O2, silica is quickly formed and the thickness of the formed layers remains limited compared to oxidation by atomic oxygen. The Si/SiO2 interfaces are analyzed in terms of partial charges and angle distributions. The obtained structures of the ultrathin SiO2 films are amorphous, including some intrinsic defects. This study is important for the fabrication of silica-based devices in the micro- and nanoelectronics industry, and more specifically for the fabrication of metal oxide semiconductor devices.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000297947700050	Publication Date	2011-11-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	36	Open Access
	Notes				Approved	Most recent IF: 4.536; 2011 IF: 4.805
	Call Number	UA @ lucian @ c:irua:94303			Serial	273
Permanent link to this record



	Author	Neyts, E.C.; Khalilov, U.; Pourtois, G.; van Duin, A.C.T.
	Title	Hyperthermal oxygen interacting with silicon surfaces : adsorption, implantation, and damage creation			Type	A1 Journal article
	Year	2011	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	115	Issue	15	Pages	4818-4823
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Using reactive molecular dynamics simulations, we have investigated the effect of single-impact, low-energy (thermal-100 eV) bombardment of a Si(100){2 × 1} surface by atomic and molecular oxygen. Penetration probability distributions, as well as defect formation distributions, are presented as a function of the impact energy for both species. It is found that at low impact energy, defects are created chemically due to the chemisorption process in the top layers of the surface, while at high impact energy, additional defects are created by a knock-on displacement of Si. These results are of particular importance for understanding device performances of silica-based microelectronic and photovoltaic devices.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000288401200060	Publication Date	2011-03-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	28	Open Access
	Notes				Approved	Most recent IF: 4.536; 2011 IF: 4.805
	Call Number	UA @ lucian @ c:irua:89858			Serial	1543
Permanent link to this record



	Author	Delabie, A.; Sioncke, S.; Rip, J.; van Elshocht, S.; Caymax, M.; Pourtois, G.; Pierloot, K.
	Title	Mechanisms for the trimethylaluminum reaction in aluminum oxide atomic layer deposition on sulfur passivated germanium			Type	A1 Journal article
	Year	2011	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	115	Issue	35	Pages	17523-17532
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Germanium combined with high-κ dielectrics is investigated for the next generations of CMOS devices. Therefore, we study reaction mechanisms for Al2O3 atomic layer deposition on sulfur passivated Ge using calculations based on density functional theory and total reflection X-ray fluorescence (TXRF). TXRF indicates 6 S/nm2 and 4 Al/nm2 after the first TMA/H2O reaction cycle, and growth inhibition from the second reaction cycle on. Calculations are performed on molecular clusters representing −GeSH surface sites. The calculations confirm that the TMA reaction does not affect the S content. On fully SH-terminated Ge, TMA favorably reacts with up to three −GeSH sites, resulting in a near tetrahedral Al coordination. Electron deficient structures with a GeS site shared between two Al atoms are proposed. The impact of the cluster size on the structures and reaction energetics is systematically investigated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000294386000037	Publication Date	2011-08-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	9	Open Access
	Notes				Approved	Most recent IF: 4.536; 2011 IF: 4.805
	Call Number	UA @ lucian @ c:irua:91714			Serial	1980
Permanent link to this record



	Author	Shenderova, O.A.; Vlasov, I.I.; Turner, S.; Van Tendeloo, G.; Orlinskii, S.B.; Shiryaev, A.A.; Khomich, A.A.; Sulyanov, S.N.; Jelezko, F.; Wrachtrup, J.
	Title	Nitrogen control in nanodiamond produced by detonation shock-wave-assisted synthesis			Type	A1 Journal article
	Year	2011	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	115	Issue	29	Pages	14014-14024
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Development of efficient production methods of nanodiamond (ND) particles containing substitutional nitrogen and nitrogen-vacancy (NV) complexes remains an important goal in the nanodiamond community. ND synthesized from explosives is generally not among the preferred candidates for imaging applications owing to lack of optically active particles containing NV centers. In this paper, we have systematically studied representative classes of NDs produced by detonation shock wave conversion of different carbon precursor materials, namely, graphite and a graphite/hexogen mixture into ND, as well as ND produced from different combinations of explosives using different cooling methods (wet or dry cooling). We demonstrate that (i) the N content in nanodiamond particles can be controlled through a correct selection of the carbon precursor material (addition of graphite, explosives composition); (ii) particles larger than approximately 20 nm may contain in situ produced optically active NV centers, and (iii) in ND produced from explosives, NV centers are detected only in ND produced by wet synthesis. ND synthesized from a mixture of graphite/explosive contains the largest amount of NV centers formed during synthesis and thus deserves special attention.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000292892500009	Publication Date	2011-06-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	54	Open Access
	Notes	Esteem 026019; Fwo			Approved	Most recent IF: 4.536; 2011 IF: 4.805
	Call Number	UA @ lucian @ c:irua:91259			Serial	2342
Permanent link to this record



	Author	Nourbakhsh, A.; Cantoro, M.; Klekachev, A.V.; Pourtois, G.; Vosch, T.; Hofkens, J.; van der Veen, M.H.; Heyns, M.M.; de Gendt, S.; Sels, B.F.
	Title	Single layer vs bilayer graphene : a comparative study of the effects of oxygen plasma treatment on their electronic and optical properties			Type	A1 Journal article
	Year	2011	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	115	Issue	33	Pages	16619-16624
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	This contribution presents the effects of a mild O2 plasma treatment on the structural, optical, and electrical properties of single-layer (SLG) and bilayer graphene (BLG). Unexpectedly, we observe only photoluminescence in the SLG parts of a graphene flake composed of regions of various thickness upon O2 plasma treatment, whereas the BLG and few-layer graphene (FLG) parts remain optically unchanged. Confirmed with X-ray photoelectron spectroscopy (XPS) that O2 plasma induces epoxide and hydroxyl-like groups in graphene, density functional theory (DFT) calculations are carried out on representative epoxidized and hydroxylated SLG and BLG models to predict density of states (DOS) and band structures. Sufficiently oxidized SLG shows a bandgap and thus loss of semimetallic behavior, while oxidized BLG maintains its semimetallic behavior even at high oxygen density in agreement with the results of the photoluminescence spectroscopy (PL) experiments. DFT calculations confirm that the Fermi velocity in epoxidized BLG is remarkably comparable with that of pristine SLG, pointing to a similarity of electronic band structure. The similarity is also experimentally demonstrated by the electrical characterization of a plasma-treated BLG-FET. As expected from the electronegative oxygen adatoms in the graphene, epoxidized BLG presents conductive features typical of hole doping. Moreover, the electrical characteristics suggest band structures closely related to that of epoxidized graphene while deviating from that of hydroxylated graphene. Finally, upon O2 plasma treatment of BLG, the four-component 2D peak around 2700 cm1 in the Raman spectrum evolves into a single Lorentzian line, very like the 2D peak of pristine SLG. Summarizing, the data in this contribution recommend that a controlled O2 plasma treatment, which is compatible with CMOS process flow in contrast to wet chemical oxidation methods, provides an efficient and valuable technique to exploit the transport properties of the bottom layer of BLG.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000294077000047	Publication Date	2011-06-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	46	Open Access
	Notes				Approved	Most recent IF: 4.536; 2011 IF: 4.805
	Call Number	UA @ lucian @ c:irua:91715			Serial	3024
Permanent link to this record



	Author	Shenderova, O.; Koscheev, A.; Zaripov, N.; Petrov, I.; Skryabin, Y.; Detkov, P.; Turner, S.; Van Tendeloo, G.
	Title	Surface chemistry and properties of ozone-purified detonation nanodiamonds			Type	A1 Journal article
	Year	2011	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	115	Issue	20	Pages	9827-9837
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Nanodiamond from ozone purification (NDO) demonstrates very distinctive properties within the class of detonation nanodiamonds, namely very high acidity and high colloidal stability in a broad pH range. To understand the origin of these unusual properties of NDO, the nature of the surface functional groups formed during detonation soot oxidation by ozone needs to be revealed. In this work, thermal desorption mass spectrometry (TDMS) and IR spectroscopy were used for the identification of surface groups and it was concluded that carboxylic anhydride groups prevail on the NDO surface. On the basis of the temperature profiles of the desorbed volatile products and their mass balance, it is hypothesized that decomposition of carboxylic anhydride groups from NDO during heating proceeds by two different mechanisms. Other distinctive features of NDO in comparison with air-treated nanodiamond are also reported.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000290652200001	Publication Date	2011-04-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	105	Open Access
	Notes	Esteem 026019; Fwo			Approved	Most recent IF: 4.536; 2011 IF: 4.805
	Call Number	UA @ lucian @ c:irua:89556			Serial	3394
Permanent link to this record



	Author	de Oliveira, E.L.; Albuquerque, E.L.; de Sousa, J.S.; Farias, G.A.; Peeters, F.M.
	Title	Configuration-interaction excitonic absorption in small Si/Ge and Ge/Si core/shell nanocrystals			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	7	Pages	4399-4407
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT)
	Abstract	The excitonic properties of Si(core)/Ge(shell) and Ge(core)/Si(shell) nanocrystals (NC's) with diameters of similar to 1.9 nm are investigated using a combination density functional ab initio method to obtain the single particle wave functions and a configuration interaction method to compute the exciton fine structure and absorption coefficient. These core/shell structures exhibit type II confinement, which is more pronounced for the Si/Ge NC as a consequence of strain. The absorption coefficients of these NC's exhibit a single dominant peak, which has a much larger oscillator strength than the multipeaks found for pure Si and Ge NC's. The exciton lifetime in Si, Ge, and Ge/Si shows a small i:emperature dependence in the range 10-300 K, whereas in Si/Ge, the exciton lifetime decreases more than an order of magnitude in the same temperature range.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000301156500007	Publication Date	2012-01-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	44	Open Access
	Notes	; The authors acknowledge financial support from CNPq and the bilateral program between Flanders and Brazil and the Belgian Science Foundation (IAP). ;			Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:113045			Serial	482
Permanent link to this record



	Author	Sivek, J.; Leenaerts, O.; Partoens, B.; Peeters, F.M.
	Title	First-principles investigation of bilayer fluorographene			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	36	Pages	19240-19245
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT)
	Abstract	Ab initio calculations within the density functional theory formalism are performed to investigate the stability and electronic properties of fluorinated bilayer graphene (bilayer fluorographene). A comparison is made to previously investigated graphane, bilayer graphane, and fluorographene. Bilayer fluorographene is found to be a much more stable material than bilayer graphane. Its electronic band structure is similar to that of monolayer fluorographene, but its electronic band gap is significantly larger (about 1 eV). We also calculate the effective masses around the Gamma-point for fluorographene and bilayer fluorographene and find that they are isotropic, in contrast to earlier reports. Furthermore, it is found that bilayer fluorographene is almost as strong as graphene, as its 2D Young's modulus is approximately 300 N m(-1).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000308631300022	Publication Date	2012-08-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	39	Open Access
	Notes	; This work is supported by the ESF-Eurocores program EuroGRAPHENE (project CONERAN) and the Flemish Science Foundation (FWO-V1). ;			Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:101842			Serial	1211
Permanent link to this record



	Author	Khalilov, U.; Pourtois, G.; van Duin, A.C.T.; Neyts, E.C.
	Title	Hyperthermal oxidation of Si(100)2x1 surfaces : effect of growth temperature			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	15	Pages	8649-8656
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Using reactive molecular dynamics simulations based on the ReaxFF potential, we studied the growth mechanism of ultrathin silica (SiO2) layers during hyperthermal oxidation as a function of temperature in the range 100-1300 K. Oxidation of Si(100){2 x 1} surfaces by both atomic and molecular oxygen was investigated for hyperthermal impact energies in the range of 1 to 5 eV. Two different growth mechanisms are found, corresponding to a low temperature oxidation and a high temperature one. The transition temperature between these mechanisms is estimated to be about 700 K. Also, the initial step of the Si oxidation process is analyzed in detail. Where possible, we validated our results with experimental and ab initio data, and good agreement was obtained. This study is important for the fabrication of silica-based devices in the micro- and nanoelectronics industry and, more specifically, for the fabrication of metal oxide semiconductor devices.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000302924900035	Publication Date	2012-03-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	32	Open Access
	Notes				Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:98259			Serial	1542
Permanent link to this record



	Author	Aerts, R.; Martens, T.; Bogaerts, A.
	Title	Influence of vibrational states on CO₂ splitting by dielectric barrier discharges			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	44	Pages	23257-23273
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, the splitting of CO2 in a pulsed plasma system, such as a dielectric barrier discharge (DBD), is evaluated from a chemical point of view by means of numerical modeling. For this purpose, a chemical reaction set of CO2 in an atmospheric pressure plasma is developed, including the vibrational states of CO2, O2, and CO. The simulated pulses are matched to the conditions of a filament (or microdischarge) and repeated with intervals of 1 μs. The influence of vibrationally excited CO2 as well as other neutral species, ions, and electrons on the CO2 splitting is discussed. Our calculations predict that the electrons have the largest contribution to the CO2 splitting at the conditions under study, by electron impact dissociation. The contribution of vibrationally excited CO2 levels in the splitting of CO2 is found be 6.4%, when only considering one microdischarge pulse and its afterglow, but it can be much higher for consecutive discharge pulses, as is typical for a filamentary DBD, when the interpulse time is short enough and accumulation effects in the vibrationally excited CO2 densities can occur.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000310769300012	Publication Date	2012-10-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	112	Open Access
	Notes				Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:101764			Serial	1659
Permanent link to this record



	Author	Nayuk, R.; Zacher, D.; Schweins, R.; Wiktor, C.; Fischer, R.A.; Van Tendeloo, G.; Huber, K.
	Title	Modulated formation of MOF-5 nanoparticles : a SANS analysis			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	10	Pages	6127-6135
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	MOF-5 nanoparticles were prepared by mixing a solution of [Zn4O(C6H5COO)(6)] with a solution of benzene-1,4-dicarboxylic acid in DMF at ambient conditions. The former species mimics as a secondary building unit (SBU), and the latter acts as linker. Mixing of the two solutions induced the formation of MOF-5 nanoparticles in dilute suspension. The applied conditions were identified as suitable for a closer investigation of the particle formation process by combined light and small angle neutron scattering (SANS). Scattering analysis revealed a significant impact of the molar ratio of the two components in the reaction mixture. Excessive use of the building unit slowed down the process. A similar effect was observed upon addition of 4n-decylbenzoic acid, which is supposed to act as a modulator. The formation mechanism leads to initial intermediates, which turn into cubelike nanoparticles with a diameter of about 60-80 nm. This initial stage is followed by an extended formation period, where nucleation proceeds over hours, leading to an increasing number of nanoparticles with the same final size of 60-80 nm.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000301509600020	Publication Date	2012-02-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	24	Open Access
	Notes				Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:97789			Serial	2163
Permanent link to this record



	Author	Ustarroz, J.; Ke, X.; Hubin, A.; Bals, S.; Terryn, H.
	Title	New insights into the early stages of nanoparticle electrodeposition			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	3	Pages	2322-2329
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Electrodeposition is an increasingly important method to synthesize supported nanoparticles, yet the early stages of electrochemical nanoparticle formation are not perfectly understood. In this paper, the early stages of silver nanoparticle electrodeposition on carbon substrates have been studied by aberration-corrected TEM, using carbon-coated TEM grids as electrochemical electrodes. In this manner we have access to as-deposited nanoparticle size distribution and structural characterization at the atomic scale combined with electrochemical measurements, which represents a breakthrough in a full understanding of the nanoparticle electrodeposition mechanisms. Whereas classical models, based upon characterization at the nanoscale, assume that electrochemical growth is only driven by direct attachment, the results reported hereafter indicate that early nanoparticle growth is mostly driven by nanocluster surface movement and aggregation. Hence, we conclude that electrochemical nulceation and growth models should be revised and that an electrochemical aggregative growth mechanism should be considered in the early stages of nanoparticle electrodeposition.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000299584400037	Publication Date	2011-12-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	104	Open Access
	Notes	Fwo			Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:96225			Serial	2316
Permanent link to this record



	Author	Khalilov, U.; Pourtois, G.; van Duin, A.C.T.; Neyts, E.C.
	Title	On the c-Si\mid a-SiO₂ interface in hyperthermal Si oxidation at room temperature			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	41	Pages	21856-21863
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The exact structure and properties of the Si vertical bar SiO2 interface are very important in microelectronics and photovoltaic devices such as metal-oxide-semiconductor field-effect transistors (MOSFETs) and solar cells. Whereas Si vertical bar SiO2 structures are traditionally produced by thermal oxidation, hyperthermal oxidation shows a number of promising advantages. However, the Si vertical bar SiO2 interface induced in hyperthermal Si oxidation has not been properly investigated yet. Therefore, in this work, the interface morphology and interfacial stresses during hyperthermal oxidation at room temperature are studied using reactive molecular dynamics simulations based on the ReaxFF potential. Interface thickness and roughness, as well as the bond length and bond angle distributions in the interface are discussed and compared with other models developed for the interfaces induced by traditional thermal oxidation. The formation of a compressive stress is observed. This compressive stress, which at the interface amounts about 2 GPa, significantly slows down the inward silica growth. This value is close to the experimental value in the Si vertical bar SiO2 interface obtained in traditional thermal oxidation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000309902100026	Publication Date	2012-09-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	27	Open Access
	Notes				Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:102167			Serial	2458
Permanent link to this record



	Author	Somers, W.; Bogaerts, A.; van Duin, A.C.T.; Neyts, E.C.
	Title	Plasma species interacting with nickel surfaces : toward an atomic scale understanding of plasma-catalysis			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	39	Pages	20958-20965
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The adsorption probability and reaction behavior of CHx plasma species on various nickel catalyst surfaces is investigated by means of reactive molecular dynamics (MD) simulations using the ReaxFF potential. Such catalysts are used in the reforming of hydrocarbons and in the growth of carbon nanotubes, and further insight in the underlying mechanisms of these processes is needed to increase their applicability. Single and consecutive impacts of CHx radicals (x={1,2,3}) were performed on four different Ni surfaces, at a temperature of 400 K. The adsorption probability is shown to be related to the number of free electrons, i.e. a higher number leads to more adsorptions, and the steric hindrance caused by the hydrogen atoms bonded to the impacting CHx species. Furthermore, some of the CH bonds break after adsorption, which generally leads to diffusion of the hydrogen atom over the surface. Additionally, these adsorbed H-atoms can be used in reactions to form new molecules, such as CH4 and C2Hx, although this is dependent on the precise morphology of the surface. New molecules are also formed by subtraction of H-atoms from adsorbed radicals, leading to occasional formation of H2 and C2Hx molecules.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000309375700040	Publication Date	2012-09-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	37	Open Access
	Notes				Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:101522			Serial	2640
Permanent link to this record



	Author	Phung, Q.M.; Vancoillie, S.; Pourtois, G.; Swerts, J.; Pierloot, K.; Delabie, A.
	Title	Atomic layer deposition of ruthenium on a titanium nitride surface : a density functional theory study			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	117	Issue	38	Pages	19442-19453
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Because of its excellent properties in nanotechnology applications, atomic layer deposition of ruthenium (Ru) has been the subject of numerous experimental studies. Recently, two different Ru precursors were compared for plasma-enhanced atomic layer deposition (PEALD) of Ru, and their reactivity was found to be different. Inhibition was observed for bis(ethylcyclopentadienyl)ruthenium (Ru(EtCp)(2)), while nearly linear growth behavior was observed for (methylcyclopentadienyl-pyrrolyl)ruthenium (Ru(MeCp)Py). To understand this difference in reactivity, we investigate the adsorption of RuCp, and RuCpPy (i.e., without substituents) on a TiN surface using calculations based on periodic boundary conditions density functional theory (DFT) combined with experiments based on Rutherford backscattering spectroscopy (RBS). The calculations demonstrate that the RuCpPy precursor chemisorbs on the TiN(100) surface while the RuCp2 precursor only physisorbs. We propose a reaction mechanism for the chemisorption of RuCpPy. The area density of the calculated RuCpPy surface species is compared with the experimental values from RBS. The impact of a H-plasma is also investigated. The DFT calculations and experimental results from RBS provide insight into the adsorption processes of the RuCpPy and RuCp2 precursors on the TiN(100) surface.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000330162500022	Publication Date	2013-08-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	6	Open Access
	Notes				Approved	Most recent IF: 4.536; 2013 IF: 4.835
	Call Number	UA @ lucian @ c:irua:114855			Serial	170
Permanent link to this record



	Author	Neek-Amal, M.; Beheshtian, J.; Sadeghi, A.; Michel, K.H.; Peeters, F.M.
	Title	Boron nitride mono layer : a strain-tunable nanosensor			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	117	Issue	25	Pages	13261-13267
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT)
	Abstract	The influence of triaxial in-plane strain on the electronic properties of a hexagonal boron-nitride sheet is investigated using density functional theory. Different from graphene, the triaxial strain localizes the molecular orbitals of the boron-nitride flake in its center depending on the direction of the applied strain. The proposed technique for localizing the molecular orbitals that are close to the Fermi level in the center of boron nitride flakes can be used to actualize engineered nanosensors, for instance, to selectively detect gas molecules. We show that the central part of the strained flake adsorbs polar molecules more strongly as compared with an unstrained sheet.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000321236400041	Publication Date	2013-06-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	38	Open Access
	Notes	; This work was supported by the EU-Marie Curie IIF postdoc Fellowship/299855 (for M.N.-A.), the ESF EuroGRAPHENE project CONGRAN, the Flemish Science Foundation (FWO-VI), and the Methusalem Funding of the Flemish government. AS. would like to thank the Universiteit Antwerpen for its hospitality. ;			Approved	Most recent IF: 4.536; 2013 IF: 4.835
	Call Number	UA @ lucian @ c:irua:109829			Serial	249
Permanent link to this record



	Author	Amini, M.N.; Leenaerts, O.; Partoens, B.; Lamoen, D.
	Title	Graphane- and fluorographene-based quantum dots			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	117	Issue	31	Pages	16242-16247
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
	Abstract	With the help of first-principles calculations, we investigate graphane/fluorographene heterostructures with special attention for graphane and fluorographene-based quantum dots. Graphane and fluorographene have large electronic band gaps, and we show that their band structures exhibit a strong type-II alignment. In this way, it is possible to obtain confined electron states in fluorographene nanostructures by embedding them in a graphane crystal. Bound hole states can be created in graphane domains embedded in a fluorographene environment. For circular graphane/fluorographene quantum dots, localized states can be observed in the band gap if the size of the radii is larger than approximately 4 to 5 Å.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000323082300046	Publication Date	2013-07-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	14	Open Access
	Notes	FWO; GOW; Hercules			Approved	Most recent IF: 4.536; 2013 IF: 4.835
	Call Number	UA @ lucian @ c:irua:109457			Serial	1367
Permanent link to this record



	Author	Khalilov, U.; Pourtois, G.; Huygh, S.; van Duin, A.C.T.; Neyts, E.C.; Bogaerts, A.
	Title	New mechanism for oxidation of native silicon oxide			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	117	Issue	19	Pages	9819-9825
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Continued miniaturization of metal-oxide-semiconductor field-effect transistors (MOSFETs) requires an ever-decreasing thickness of the gate oxide. The structure of ultrathin silicon oxide films, however, critically depends on the oxidation mechanism. Using reactive atomistic simulations, we here demonstrate how the oxidation mechanism in hyperthermal oxidation of such structures may be controlled by the oxidation temperature and the oxidant energy. Specifically, we study the interaction of hyperthermal oxygen with energies of 15 eV with thin SiOx (x ≤ 2) films with a native oxide thickness of about 10 Å. We analyze the oxygen penetration depth probability and compare with results of the hyperthermal oxidation of a bare Si(100){2 × 1} (c-Si) surface. The temperature-dependent oxidation mechanisms are discussed in detail. Our results demonstrate that, at low (i.e., room) temperature, the penetrated oxygen mostly resides in the oxide region rather than at the SiOx\|c-Si interface. However, at higher temperatures, starting at around 700 K, oxygen atoms are found to penetrate and to diffuse through the oxide layer followed by reaction at the c-Si boundary. We demonstrate that hyperthermal oxidation resembles thermal oxidation, which can be described by the DealGrove model at high temperatures. Furthermore, defect creation mechanisms that occur during the oxidation process are also analyzed. This study is useful for the fabrication of ultrathin silicon oxide gate oxides for metal-oxide-semiconductor devices as it links parameters that can be straightforwardly controlled in experiment (oxygen temperature, velocity) with the silicon oxide structure.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000319649100032	Publication Date	2013-04-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	24	Open Access
	Notes				Approved	Most recent IF: 4.536; 2013 IF: 4.835
	Call Number	UA @ lucian @ c:irua:107989			Serial	2321
Permanent link to this record



	Author	Snoeckx, R.; Aerts, R.; Tu, X.; Bogaerts, A.
	Title	Plasma-based dry reforming : a computational study ranging from the nanoseconds to seconds time scale			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	117	Issue	10	Pages	4957-4970
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	We present a computational study for the conversion of CH4 and CO2 into value-added chemicals, i.e., the so-called dry reforming of methane, in a dielectric barrier discharge reactor. A zero-dimensional chemical kinetics model is applied to study the plasma chemistry in a 1:1 CH4/CO2 mixture. The calculations are first performed for one microdischarge pulse and its afterglow, to study in detail the chemical pathways of the conversion. Subsequently, long time-scale simulations are carried out, corresponding to real residence times in the plasma, assuming a large number of consecutive microdischarge pulses, to mimic the conditions of the filamentary discharge regime in a dielectric barrier discharge (DBD) reactor. The conversion of CH4 and CO2 as well as the selectivity of the formed products and the energy cost and energy efficiency of the process are calculated and compared to experiments for a range of different powers and gas flows, and reasonable agreement is reached.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000316308400010	Publication Date	2013-02-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	118	Open Access
	Notes				Approved	Most recent IF: 4.536; 2013 IF: 4.835
	Call Number	UA @ lucian @ c:irua:106516			Serial	2628
Permanent link to this record



	Author	Yusupov, M.; Bogaerts, A.; Huygh, S.; Snoeckx, R.; van Duin, A.C.T.; Neyts, E.C.
	Title	Plasma-induced destruction of bacterial cell wall components : a reactive molecular dynamics simulation			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	117	Issue	11	Pages	5993-5998
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Nonthermal atmospheric pressure plasmas are gaining increasing attention for biomedical applications. However, very little fundamental information on the interaction mechanisms between the plasma species and biological cells is currently available. We investigate the interaction of important plasma species, such as OH, H2O2, O, O3, as well as O2 and H2O, with bacterial peptidoglycan by means of reactive molecular dynamics simulations, aiming for a better understanding of plasma disinfection. Our results show that OH, O, O3, and H2O2 can break structurally important bonds of peptidoglycan (i.e., CO, CN, or CC bonds), which consequently leads to the destruction of the bacterial cell wall. The mechanisms behind these breakups are, however, dependent on the impinging plasma species, and this also determines the effectiveness of the cell wall destruction.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000316773000056	Publication Date	2013-02-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	59	Open Access
	Notes				Approved	Most recent IF: 4.536; 2013 IF: 4.835
	Call Number	UA @ lucian @ c:irua:107154			Serial	2636
Permanent link to this record



	Author	Marikutsa, A.V.; Rumyantseva, M.N.; Frolov, D.D.; Morozov, I.V.; Boltalin, A.I.; Fedorova, A.A.; Petukhov, I.A.; Yashina, L.V.; Konstantinova, E.A.; Sadovskaya, E.M.; Abakumov, A.M.; Zubavichus, Y.V.; Gaskov, A.M.;
	Title	Role of PdO_x and RuO_y clusters in oxygen exchange between nanocrystalline tin dioxide and the gas phase			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	117	Issue	45	Pages	23858-23867
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The effect of palladium- and ruthenium-based clusters on nanocrystalline tin dioxide interaction with oxygen was studied by temperature-programmed oxygen isotopic exchange with mass-spectrometry detection. The modification of aqueous sol-gel prepared SnO2 by palladium and, to a larger extent, by ruthenium, increases surface oxygen concentration on the materials. The revealed effects on oxygen exchange-lowering the threshold temperature, separation of surface oxygen contribution to the process, increase of heteroexchange rate and oxygen diffusion coefficient, decrease of activation energies of exchange and diffusion-were more intensive for Ru-modified SnO2 than in the case of SnO2/Pd. The superior promoting activity of ruthenium on tin dioxide interaction with oxygen was interpreted by favoring the dissociative O-2 adsorption and increasing the oxygen mobility, taking into account the structure and chemical composition of the modifier clusters.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000327110500046	Publication Date	2013-10-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	20	Open Access
	Notes				Approved	Most recent IF: 4.536; 2013 IF: 4.835
	Call Number	UA @ lucian @ c:irua:112706			Serial	2924
Permanent link to this record



	Author	Skaltsas, T.; Ke, X.; Bittencourt, C.; Tagmatarchis, N.
	Title	Ultrasonication induces oxygenated species and defects onto exfoliated graphene			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	117	Issue	44	Pages	23272-23278
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The effect of ultrasonication parameters, such as time and power applied, to exfoliate graphite in o-dichlorobenzene (o-DCB) and N-methyl-1,2-pyrrolidone (NMP) was examined. It was found that the concentration of graphene was higher in o-DCB, while its dispersibility was increased when sonication was applied for a longer period and/or at higher power. However, spectroscopic examination by X-ray photoelectron spectroscopy (XPS) revealed that ultrasonication causes defects and induces oxygen functional groups in the form of carboxylic acids and ethers/epoxides onto the graphene lattice. Additional proof for the latter arose from Raman, IR, and thermogravimetry studies. The carboxylic acids and ethers/epoxides onto exfoliated graphene were derived from air during ultrasonication and found independent of the solvent used for the exfoliation and the power and/or time ultrasonication applied. Quantitative evaluation of the amount of oxygenated species present on exfoliated graphene as performed by high-resolution XPS revealed that the relative oxygen percentage was higher when exfoliation was performed in NMP. Finally, the sonication time and/or power affected the oxygen content on exfoliated graphene, since extended ultrasonication resulted in a decrease in the oxygen content on exfoliated graphene, with a simultaneous increase of defected sp(3) carbon atoms.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000326845400090	Publication Date	2013-10-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	65	Open Access
	Notes				Approved	Most recent IF: 4.536; 2013 IF: 4.835
	Call Number	UA @ lucian @ c:irua:112710			Serial	3797
Permanent link to this record



	Author	Verbruggen, S.W.; Keulemans, M.; Martens, J.A.; Lenaerts, S.
	Title	Predicting the surface plasmon resonance wavelength of gold-silver alloy nanoparticles			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	117	Issue	37	Pages	19142-19145
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Gold-silver alloy nanoparticles display surface plasmon resonance (SPR) over a broad range of the UV-vis spectrum. We propose a model to predict the SPR wavelength of gold-silver alloy colloids based on the combined effect of alloy composition and particle size. The SPR wavelength is derived from extinction spectra simulated using available experimental dielectric constant data and accounts for particle size by applying Mie theory. Comparison of calculated values with experimental data evidences the accuracy of the model. The new SPR wavelength estimation tool will be of particular interest for developing dedicated bimetallic plasmonic nanostructures.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000330162600042	Publication Date	2013-08-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447; 1932-7455	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	51	Open Access
	Notes	; S.W.V. acknowledges the Research Foundation of Flanders (FWO) for financial support. JAM. acknowledges the Flemish government for long-term structural funding (Methusalem). ;			Approved	Most recent IF: 4.536; 2013 IF: 4.835
	Call Number	UA @ admin @ c:irua:114837			Serial	5985
Permanent link to this record



	Author	Stambula, S.; Gauquelin, N.; Bugnet, M.; Gorantla, S.; Turner, S.; Sun, S.; Liu, J.; Zhang, G.; Sun, X.; Botton, G.A.
	Title	Chemical structure of nitrogen-doped graphene with single platinum atoms and atomic clusters as a platform for the PEMFC electrode			Type	A1 Journal article
	Year	2014	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	118	Issue	8	Pages	3890-3900
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A platform for producing stabilized Pt atoms and clusters through the combination of an N-doped graphene support and atomic layer deposition (ALD) for the Pt catalysts was investigated using transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM). It was determined, using imaging and spectroscopy techniques, that a wide range of N-dopant types entered the graphene lattice through covalent bonds without largely damaging its structure. Additionally and most notably, Pt atoms and atomic clusters formed in the absence of nanoparticles. This work provides a new strategy for experimentally producing stable atomic and subnanometer cluster catalysts, which can greatly assist the proton exchange membrane fuel cell (PEMFC) development by producing the ultimate surface area to volume ratio catalyst.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000332188100004	Publication Date	2014-02-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	57	Open Access
	Notes	Fwo			Approved	Most recent IF: 4.536; 2014 IF: 4.772
	Call Number	UA @ lucian @ c:irua:115571			Serial	352
Permanent link to this record



	Author	Buffière, M.; Zaghi, A.E.; Lenaers, N.; Batuk, M.; Khelifi, S.; Drijkoningen, J.; Hamon, J.; Stesmans, A.; Kepa, J.; Afanas’ev, V.V.; Hadermann, J.; D’Haen, J.; Manca, J.; Vleugels, J.; Meuris, M.; Poortmans, J.;
	Title	Effect of binder content in Cu-In-Se precursor ink on the physical and electrical properties of printed CuInSe₂ solar cells			Type	A1 Journal article
	Year	2014	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	118	Issue	47	Pages	27201-27209
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Printed chalcopyrite thin films have attracted considerable attention in recent years due to their potential in the high-throughput production of photovoltaic devices. To improve the homogeneity of printed CuInSe2 (CISe) layers, chemical additives such as binder can be added to the precursor ink. In this contribution, we investigate the influence of the dicyandiamide (DCDA) content, used as a binder in the precursor ink, on the physical and electrical properties of printed CISe solar cells. It is shown that the use of the binder leads to a dense absorber, composed of large CISe grains close to the surface, while the bulk of the layer consists of CISe crystallites embedded in a CuxS particle based matrix, resulting from the limited sintering of the precursor in this region. The expected additional carbon contamination of the CISe layer due to the addition of the binder appears to be limited, and the optical properties of the CISe layer are similar to the reference sample without additive. The electrical characterization of the corresponding CISe/CdS solar cells shows a degradation of the efficiency of the devices, due to a modification in the predominant recombination mechanisms and a limitation of the space charge region width when using the binder; both effects could be explained by the inhomogeneity of the bulk of the CISe absorber and high defect density at the CISe/CuxS-based matrix interface.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000345722400003	Publication Date	2014-11-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	4	Open Access
	Notes				Approved	Most recent IF: 4.536; 2014 IF: 4.772
	Call Number	UA @ lucian @ c:irua:121332			Serial	801
Permanent link to this record