NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	211–240 of 371 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 >>

List View

Citations

Details

	Records
	Author	Somers, W.; Bogaerts, A.; van Duin, A.C.T.; Huygh, S.; Bal, K.M.; Neyts, E.C.
	Title	Temperature influence on the reactivity of plasma species on a nickel catalyst surface : an atomic scale study			Type	A1 Journal article
	Year	2013	Publication	Catalysis today	Abbreviated Journal	Catal Today
	Volume	211	Issue		Pages	131-136
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In recent years, the potential use of hydrogen as a clean energy source has gained considerable attention. Especially H2 formation by Ni-catalyzed reforming of methane at elevated temperatures is an attractive process. However, a more fundamental knowledge at the atomic level is needed for a full comprehension of the reactions at the catalyst surface. In this contribution, we therefore investigate the H2 formation after CHx impacts on a Ni(1 1 1) surface in the temperature range 4001600 K, by means of reactive molecular dynamics (MD) simulations using the ReaxFF potential. While some H2 formation is already observed at the lower temperatures, substantial H2 formation is only obtained at elevated temperatures of 1400 K and above. At 1600 K, the H2 molecules are even the most frequently formed species. In direct correlation with the increasing dehydrogenation at elevated temperatures, an increased surface-to-subsurface C-diffusivity is observed as well. This study highlights the major importance of the temperature on the H2 formation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000320697800020	Publication Date	2013-03-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0920-5861;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.636	Times cited	27	Open Access
	Notes				Approved	Most recent IF: 4.636; 2013 IF: 3.309
	Call Number	UA @ lucian @ c:irua:108675			Serial	3500
Permanent link to this record



	Author	Van Grieken, R.
	Title	Editorial : introducing Dr Markowicz as X-Ray Spectrometry's new associate editor for Europe			Type	A1 Journal article
	Year	2013	Publication	X-ray spectrometry	Abbreviated Journal
	Volume	42	Issue	4	Pages	175
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000320727900001	Publication Date	2013-06-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0049-8246	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:108738			Serial	7832
Permanent link to this record



	Author	Vanmeert, F.; Mudronja, D.; Fazinic, S.; Janssens, K.; Tibljas, D.
	Title	Semi-quantitative analysis of the formation of a calcium oxalate protective layer for monumental limestone using combined micro-XRF and micro-XRPD			Type	A1 Journal article
	Year	2013	Publication	X-ray spectrometry	Abbreviated Journal	X-Ray Spectrom
	Volume	42	Issue	4	Pages	256-261
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	A current method for the protection of cretaceous limestone present in various monuments consists of performing a passivating treatment with ammonium oxalate (AmOx). A calcium oxalate protective layer is formed on the surface and enhances the acid resistance of the stone. The in-depth formation of the calcium oxalate layer was investigated on cross sections by using combined micro X-ray fluorescence and micro X-ray powder diffraction (mu XRF/mu XRPD). XRPD showed the presence of both whewellite and weddellite in the calcite stone matrix. A correction was made for sample misalignment, which was visible in both the fluorescence and the diffraction line measurements. A semi-quantitative analysis was performed on the basis of Klug's equation for a two-phase mixture (the presence of weddellite was neglected) without the need for a known reference sample. By assuming two extreme compositions for a reference weight fraction (1 and 99wt%), it was possible to obtain whewellite concentration profiles, which can be used for comparing the effectiveness of different methods for the application of AmOx to the stone surface and the effect of treatment time and AmOx concentration used. It is shown that for the relative amounts of whewellite formed, the differences due to the assumed weight fractions are smaller than the errors due to sample heterogeneity and preferred orientation. Copyright (c) 2013 John Wiley & Sons, Ltd.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000320727900015	Publication Date	2013-05-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0049-8246	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.298	Times cited	5	Open Access
	Notes	; The authors would like to thank De Nolf W. for his valuable feedback on the analysis of the X-ray diffraction data. We acknowledge SOLEIL for provision of SR facilities (proposal ID 20100979), and we would like to thank Dr. C. Mocuta for his assistance at the DIFFABS beamline. This research was supported by the Interuniversity Attraction Poles Program – Belgian Science Policy (IUAP VI/16). The text also presents results of GOA 'XANES meets ELNES' (Research Fund University of Antwerp, Belgium) and from FWO (Brussels, Belgium) projects no. G.0704.08 and G.01769.09. The EU Community's FP7 Research Infrastructures program for the CHARISMA Project (grant agreement 228330) and, within framework in particular, the access possibilities to the SOLEIL and IPANEMA facilities are also acknowledged. ;			Approved	Most recent IF: 1.298; 2013 IF: 1.187
	Call Number	UA @ admin @ c:irua:109579			Serial	5827
Permanent link to this record



	Author	Aerts, R.; Tu, X.; Van Gaens, W.; Whitehead, J.C.; Bogaerts, A.
	Title	Gas purification by nonthermal plasma : a case study of ethylene			Type	A1 Journal article
	Year	2013	Publication	Environmental science and technology	Abbreviated Journal	Environ Sci Technol
	Volume	47	Issue	12	Pages	6478-6485
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The destruction of ethylene in a dielectric barrier discharge plasma is investigated by the combination of kinetic modeling and experiments, as a case study for plasma-based gas purification. The influence of the specific energy deposition on the removal efficiency and the selectivity toward CO and CO2 is studied for different concentrations of ethylene. The model allows the identication of the destruction pathway in dry and humid air. The latter is found to be mainly initiated by metastable N2 molecules, but the further destruction steps are dominated by O atoms and OH radicals. Upon increasing air humidity, the removal efficiency drops by ±15% (from 85% to 70%), but the selectivity toward CO and CO2 stays more or less constant at 60% and 22%, respectively. Beside CO and CO2, we also identified acetylene, formaldehyde, and water as byproducts of the destruction process, with concentrations of 1606 ppm, 15033 ppm, and 185 ppm in humid air (with 20% RH), respectively. Finally, we investigated the byproducts generated by the humid air discharge itself, which are the greenhouse gases O3, N2O, and the toxic gas NO2.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000320749000051	Publication Date	2013-05-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-936X;1520-5851;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.198	Times cited	56	Open Access
	Notes				Approved	Most recent IF: 6.198; 2013 IF: 5.481
	Call Number	UA @ lucian @ c:irua:108743			Serial	1319
Permanent link to this record



	Author	Van Gaens, W.; Bogaerts, A.
	Title	Kinetic modelling for an atmospheric pressure argon plasma jet in humid air			Type	A1 Journal article
	Year	2013	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	46	Issue	27	Pages	275201-275253
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A zero-dimensional, semi-empirical model is used to describe the plasma chemistry in an argon plasma jet flowing into humid air, mimicking the experimental conditions of a setup from the Eindhoven University of Technology. The model provides species density profiles as a function of the position in the plasma jet device and effluent. A reaction chemistry set for an argon/humid air mixture is developed, which considers 84 different species and 1880 reactions. Additionally, we present a reduced chemistry set, useful for higher level computational models. Calculated species density profiles along the plasma jet are shown and the chemical pathways are explained in detail. It is demonstrated that chemically reactive H, N, O and OH radicals are formed in large quantities after the nozzle exit and H2, O2(1Δg), O3, H2O2, NO2, N2O, HNO2 and HNO3 are predominantly formed as 'long living' species. The simulations show that water clustering of positive ions is very important under these conditions. The influence of vibrational excitation on the calculated electron temperature is studied. Finally, the effect of varying gas temperature, flow speed, power density and air humidity on the chemistry is investigated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000320854700009	Publication Date	2013-06-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	115	Open Access
	Notes				Approved	Most recent IF: 2.588; 2013 IF: 2.521
	Call Number	UA @ lucian @ c:irua:108725			Serial	1758
Permanent link to this record



	Author	Ostrikov, K.; Neyts, E.C.; Meyyappan, M.
	Title	Plasma nanoscience : from nano-solids in plasmas to nano-plasmas in solids			Type	A1 Journal article
	Year	2013	Publication	Advances in physics	Abbreviated Journal	Adv Phys
	Volume	62	Issue	2	Pages	113-224
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The unique plasma-specific features and physical phenomena in the organization of nanoscale soild-state systems in a broad range of elemental composition, structure, and dimensionality are critically reviewed. These effects lead to the possibility to localize and control energy and matter at nanoscales and to produce self-organized nano-solids with highly unusual and superior properties. A unifying conceptual framework based on the control of production, transport, and self-organization of precursor species is introduced and a variety of plasma-specific non-equilibrium and kinetics-driven phenomena across the many temporal and spatial scales is explained. When the plasma is localized to micrometer and nanometer dimensions, new emergent phenomena arise. The examples range from semiconducting quantum dots and nanowires, chirality control of single-walled carbon nanotubes, ultra-fine manipulation of graphenes, nano-diamond, and organic matter to nano-plasma effects and nano-plasmas of different states of matter.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000320913600001	Publication Date	2013-06-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0001-8732;1460-6976;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	21.818	Times cited	380	Open Access
	Notes				Approved	Most recent IF: 21.818; 2013 IF: 18.062
	Call Number	UA @ lucian @ c:irua:108723			Serial	2639
Permanent link to this record



	Author	Ghosh, P.K.; Misko, V.R.; Marchesoni, F.; Nori, F.
	Title	Self-propelled Janus particles in a ratchet : numerical simulations			Type	A1 Journal article
	Year	2013	Publication	Physical review letters	Abbreviated Journal	Phys Rev Lett
	Volume	110	Issue	26	Pages	1-5
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Brownian transport of self-propelled overdamped microswimmers (like Janus particles) in a two-dimensional periodically compartmentalized channel is numerically investigated for different compartment geometries, boundary collisional dynamics, and particle rotational diffusion. The resulting time-correlated active Brownian motion is subject to rectification in the presence of spatial asymmetry. We prove that ratcheting of Janus particles can be orders of magnitude stronger than for ordinary thermal potential ratchets and thus experimentally accessible. In particular, autonomous pumping of a large mixture of passive particles can be induced by just adding a small fraction of Janus particles.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000320956500017	Publication Date	2013-06-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0031-9007;1079-7114;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.462	Times cited	143	Open Access
	Notes	; We thank RICC for computational resources. P. K. G. acknowledges financial support from JSPS through fellowship No. P11502. V. R. M. acknowledges support from the Odysseus Program of the Flemish Government and FWO-VI. F. M. acknowledges partial support from the European Commission, Grant No. 256959 (NanoPower). F. N. was supported in part by the ARO, RIKEN iTHES Project, JSPS-RFBR Contract No. 12-02-92100, Grant-in-Aid for Scientific Research (S), MEXT Kakenhi on Quantum Cybernetics, and the JSPS via its FIRST program. ;			Approved	Most recent IF: 8.462; 2013 IF: 7.728
	Call Number	UA @ lucian @ c:irua:109833			Serial	2979
Permanent link to this record



	Author	Comrie, C.M.; Ahmed, A.; Smeets, D.; Demeulemeester, J.; Turner, S.; Van Tendeloo, G.; Detavernier, C.; Vantomme, A.
	Title	Effect of high temperature deposition on CoSi₂ phase formation			Type	A1 Journal article
	Year	2013	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	113	Issue	23	Pages	234902-234908
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	This paper discusses the nucleation behaviour of the CoSi to CoSi2 transformation from cobalt silicide thin films grown by deposition at elevated substrate temperatures ranging from 375 °C to 600 °C. A combination of channelling, real-time Rutherford backscattering spectrometry, real-time x-ray diffraction, and transmission electron microscopy was used to investigate the effect of the deposition temperature on the subsequent formation temperature of CoSi2, its growth behaviour, and the epitaxial quality of the CoSi2 thus formed. The temperature at which deposition took place was observed to exert a significant and systematic influence on both the formation temperature of CoSi2 and its growth mechanism. CoSi films grown at the lowest temperatures were found to increase the CoSi2 nucleation temperature above that of CoSi2 grown by conventional solid phase reaction, whereas the higher deposition temperatures reduced the nucleation temperature significantly. In addition, a systematic change in growth mechanism of the subsequent CoSi2 growth occurs as a function of deposition temperature. First, the CoSi2 growth rate from films grown at the lower reactive deposition temperatures is substantially lower than that grown at higher reactive deposition temperatures, even though the onset of growth occurs at a higher temperature, Second, for deposition temperatures below 450 °C, the growth appears columnar, indicating nucleation controlled growth. Elevated deposition temperatures, on the other hand, render the CoSi2 formation process layer-by-layer which indicates enhanced nucleation of the CoSi2 and diffusion controlled growth. Our results further indicate that this observed trend is most likely related to stress and changes in microstructure introduced during reactive deposition of the CoSi film. The deposition temperature therefore provides a handle to tune the CoSi2 growth mechanism.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000321011700077	Publication Date	2013-06-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	2	Open Access
	Notes	Fwo; Countatoms			Approved	Most recent IF: 2.068; 2013 IF: 2.185
	Call Number	UA @ lucian @ c:irua:109266			Serial	815
Permanent link to this record



	Author	Govaerts, K.; Saniz, R.; Partoens, B.; Lamoen, D.
	Title	van der Waals bonding and the quasiparticle band structure of SnO from first principles			Type	A1 Journal article
	Year	2013	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	87	Issue	23	Pages	235210-235217
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
	Abstract	In this work we have investigated the structural and electronic properties of SnO, which is built up from layers kept together by van der Waals (vdW) forces. The combination of a vdW functional within density functional theory (DFT) and quasiparticle band structure calculations within the GW approximation provides accurate values for the lattice parameters, atomic positions, and the electronic band structure including the fundamental (indirect) and the optical (direct) band gap without the need of experimental or empirical input. A systematic comparison is made between different levels of self-consistency within the GW approach {following the scheme of Shishkin et al. [Phys. Rev. B 75, 235102 (2007)]} and the results are compared with DFT and hybrid functional results. Furthermore, the effect of the vdW-corrected functional as a starting point for the GW calculation of the band gap has been investigated. Finally, we studied the effect of the vdW functional on the electron charge density.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000321061000003	Publication Date	2013-07-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	50	Open Access
	Notes	IWT; FWO; Hercules			Approved	Most recent IF: 3.836; 2013 IF: 3.664
	Call Number	UA @ lucian @ c:irua:109596			Serial	3835
Permanent link to this record



	Author	Amin-Ahmadi, B.; Idrissi, H.; Galceran, M.; Colla, M.S.; Raskin, J.P.; Pardoen, T.; Godet, S.; Schryvers, D.
	Title	Effect of deposition rate on the microstructure of electron beam evaporated nanocrystalline palladium thin films			Type	A1 Journal article
	Year	2013	Publication	Thin solid films : an international journal on the science and technology of thin and thick films	Abbreviated Journal	Thin Solid Films
	Volume	539	Issue		Pages	145-150
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The influence of the deposition rate on the formation of growth twins in nanocrystalline Pd films deposited by electron beam evaporation is investigated using transmission electron microscopy. Statistical measurements prove that twin boundary (TB) density and volume fraction of grains containing twins increase with increasing deposition rate. A clear increase of the dislocation density was observed for the highest deposition rate of 5 Å/s, caused by the increase of the internal stress building up during deposition. Based on crystallographic orientation indexation using transmission electron microscopy, it can be concluded that a {111} crystallographic texture increases with increasing deposition rate even though the {101} crystallographic texture remains dominant. Most of the TBs are fully coherent without any residual dislocations. However, for the highest deposition rate (5 Å/s), the coherency of the TBs decreases significantly as a result of the interaction of lattice dislocations emitted during deposition with the growth TBs. The analysis of the grain boundary character of different Pd films shows that an increasing fraction of high angle grain boundaries with misorientation angles around 5565° leads to a higher potential for twin formation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000321111100025	Publication Date	2013-05-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0040-6090;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.879	Times cited	13	Open Access
	Notes	Fwo			Approved	Most recent IF: 1.879; 2013 IF: 1.867
	Call Number	UA @ lucian @ c:irua:109268			Serial	807
Permanent link to this record



	Author	Van Boxem, R.; Verbeeck, J.; Partoens, B.
	Title	Spin effects in electron vortex states			Type	A1 Journal article
	Year	2013	Publication	Europhysics letters	Abbreviated Journal	Epl-Europhys Lett
	Volume	102	Issue	4	Pages	40010-40016
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
	Abstract	The recent experimental realization of electron vortex beams opens up a wide research domain previously unexplored. The present paper explores the relativistic properties of these electron vortex beams, and quantifies deviations from the scalar wave theory. It is common in electron optics to use the Schrodinger equation neglecting spin. The present paper investigates the role of spin and the total angular momentum J(z) and how it pertains to the vortex states. As an application, we also investigate if it is possible to use holographic reconstruction to create novel total angular momentum eigenstates in a transmission electron microscope. It is demonstrated that relativistic spin coupling effects disappear in the paraxial limit, and spin effects in holographically created electron vortex beams can only be exploited by using specialized magnetic apertures.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Paris	Editor
	Language		Wos	000321118600011	Publication Date	2013-06-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0295-5075;1286-4854;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.957	Times cited	11	Open Access
	Notes	312483 Esteem2; N246791 Countatoms; 278510 Vortex; esteem2jra1; esteem2jra3 ECASJO_;			Approved	Most recent IF: 1.957; 2013 IF: 2.269
	Call Number	UA @ lucian @ c:irua:109852			Serial	3087
Permanent link to this record



	Author	Verreydt, G.; Annable, M.D.; Kaskassian, S.; van Keer, I.; Bronders, J.; Diels, L.; Vanderauwera, P.
	Title	Field demonstration and evaluation of the passive flux meter on a CAH groundwater plume			Type	A1 Journal article
	Year	2013	Publication	Environmental Science and Pollution Research	Abbreviated Journal
	Volume	20	Issue	7	Pages	4621-4634
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL); Biochemical Wastewater Valorization & Engineering (BioWaVE)
	Abstract	This study comprises the first application of the Passive Flux Meter (PFM) for the measurement of chlorinated aliphatic hydrocarbon (CAH) mass fluxes and Darcy water fluxes in groundwater at a European field site. The PFM was originally developed and applied to measurements near source zones. The focus of the PFM is extended from near source to plume zones. For this purpose, 48 PFMs of 1.4 m length were constructed and installed in eight different monitoring wells in the source and plume zone of a CAH-contaminated field site located in France. The PFMs were retrieved, sampled, and analyzed after 3 to 11 weeks of exposure time, depending on the expected contaminant flux. PFM evaluation criteria include analytical, technical, and practical aspects as well as conditions and applicability. PFM flux data were compared with so-called traditional soil and groundwater concentration data obtained using active sampling methods. The PFMs deliver reasonable results for source as well as plume zones. The limiting factor in the PFM applicability is the exposure time together with the groundwater flux. Measured groundwater velocities at the field site range from 2 to 41 cm/day. Measured contaminant flux data raise up to 13 g/m(2)/day for perchloroethylene in the plume zone. Calculated PFM flux averaged concentration data and traditional concentration data were of similar magnitude for most wells. However, both datasets need to be compared with reservation because of the different sampling nature and time. Two important issues are the PFM tracer loss during installation/extraction and the deviation of the groundwater flow field when passing the monitoring well and PFM. The demonstration of the PFM at a CAH-contaminated field site in Europe confirmed the efficiency of the flux measurement technique for source as well as plume zones. The PFM can be applied without concerns in monitoring wells with European standards. The acquired flux data are of great value for the purpose of site characterization and mass discharge modeling, and can be used in combination with traditional soil and groundwater sampling methods.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000321126700030	Publication Date	2013-01-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0944-1344; 1614-7499	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:109817			Serial	7965
Permanent link to this record



	Author	Liu, Y.; Brelet, Y.; He, Z.; Yu, L.; Forestier, B.; Deng, Y.; Jiang, H.; Houard, A.
	Title	Laser-induced periodic annular surface structures on fused silica surface			Type	A1 Journal article
	Year	2013	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	102	Issue	25	Pages	251103-251104
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We report on the formation of laser-induced periodic annular surface structures on fused silica irradiated with multiple femtosecond laser pulses. This surface morphology emerges after the disappearance of the conventional laser induced periodic surface structures, under successive laser pulse irradiation. It is independent of the laser polarization and universally observed for different focusing geometries. We interpret its formation in terms of the interference between the reflected laser field on the surface of the damage crater and the incident laser pulse. (C) 2013 AIP Publishing LLC.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000321145200003	Publication Date	2013-06-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	19	Open Access
	Notes				Approved	Most recent IF: 3.411; 2013 IF: 3.515
	Call Number	UA @ lucian @ c:irua:109832			Serial	1786
Permanent link to this record



	Author	Lind, O.C.; de Nolf, W.; Janssens, K.; Salbu, B.
	Title	Micro-analytical characterisation of radioactive heterogeneities in samples from Central Asian TENORM sites			Type	A1 Journal article
	Year	2013	Publication	Journal of environmental radioactivity	Abbreviated Journal	J Environ Radioactiv
	Volume	123	Issue		Pages	63-70
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	The present work focuses on the use of micro-analytical techniques to demonstrate the heterogeneous distribution of radionuclides and metals in soils collected at Former Soviet Union mining sites in Central Asia. Based on digital autoradiography, radionuclides were heterogeneously distributed in soil samples collected at the abandoned uranium mining sites Kurday, Kazakhstan, Kadji Sai, Kyrgyzstan and Taboshar, Tajikistan. Using electron microscopy interfaced with X-ray microanalysis submicron – mm-sized radioactive particles and rock fragments with U, As, Se and toxic metals on the surfaces were identified in Kurday and Kadji Sai samples. Employing scanning and tomographic (3D) synchrotron radiation based micro-X-ray fluorescence (mu-SRXRF) and synchrotron radiation based micro-X-ray diffraction (mu-SRXRD) allowed us to observe the inner structure of the particles without physical sectioning. The distribution of elements in virtual crosssections demonstrated that U and a series of toxic elements were rather heterogeneously distributed also within individual radioactive TENORM particles. Compared to archived data, U in Kadji Sai particles was present as uraninite (U4O9+y or UO2+x) or Na-zippeite aNa(4)(UO2)(6)[(OH)(10)(SO4)(3)]center dot 4H(2)O), i.e. U minerals with very low solubility. The results suggested that TENORM particles can carry substantial amount of radioactivity, which can be subject to re-suspension, atmospheric transport and water transport. Thus, the potential radioecological and radioanalytical impact of radioactive particles at NORM and TENORM sites worldwide should be taken into account. The present work also demonstrates that radioecological studies should benefit from the use of advanced methods such as synchrotron radiation based techniques. (C) 2012 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000321177200007	Publication Date	2012-03-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0265-931x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.31	Times cited	16	Open Access
	Notes	; We gratefully acknowledge the support provided by the Norwegian Ministry of Foreign Affairs and the European Commission (HASYLAB proposal I-20070051 EC and II-20090184 EC). The authors are indebted to Dr. Karen Appel and Dr. Manuela Borchert, Hasylab for beamline assistance. ;			Approved	Most recent IF: 2.31; 2013 IF: 3.571
	Call Number	UA @ admin @ c:irua:109558			Serial	5710
Permanent link to this record



	Author	Neek-Amal, M.; Beheshtian, J.; Sadeghi, A.; Michel, K.H.; Peeters, F.M.
	Title	Boron nitride mono layer : a strain-tunable nanosensor			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	117	Issue	25	Pages	13261-13267
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT)
	Abstract	The influence of triaxial in-plane strain on the electronic properties of a hexagonal boron-nitride sheet is investigated using density functional theory. Different from graphene, the triaxial strain localizes the molecular orbitals of the boron-nitride flake in its center depending on the direction of the applied strain. The proposed technique for localizing the molecular orbitals that are close to the Fermi level in the center of boron nitride flakes can be used to actualize engineered nanosensors, for instance, to selectively detect gas molecules. We show that the central part of the strained flake adsorbs polar molecules more strongly as compared with an unstrained sheet.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000321236400041	Publication Date	2013-06-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	38	Open Access
	Notes	; This work was supported by the EU-Marie Curie IIF postdoc Fellowship/299855 (for M.N.-A.), the ESF EuroGRAPHENE project CONGRAN, the Flemish Science Foundation (FWO-VI), and the Methusalem Funding of the Flemish government. AS. would like to thank the Universiteit Antwerpen for its hospitality. ;			Approved	Most recent IF: 4.536; 2013 IF: 4.835
	Call Number	UA @ lucian @ c:irua:109829			Serial	249
Permanent link to this record



	Author	Zwozdziak, A.; Sowka, I.; Krupińska, B.; Zwozdziak, J.; Nych, A.
	Title	Infiltration or indoor sources as determinants of the elemental composition of particulate matter inside a school in Wroclaw, Poland?			Type	A1 Journal article
	Year	2013	Publication	Building and environment	Abbreviated Journal
	Volume	66	Issue		Pages	173-180
	Keywords	A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	Children's exposure to air pollution requires a focus on air quality in places where they spend most time, e.g. in schools. Therefore, understanding how indoor elemental concentrations relate the outdoor ones is necessary to create healthy indoor school environment. The aims of this study were to examine the elemental composition of particulate matter (PM1, PM2.5, PM10) in the school and also to investigate to what degree indoor elemental concentrations are affected by outdoor air or generated inside the school. The measurements were performed inside and outside the public school building in the centre of the city. It was observed that concentrations of most elements were higher at school than outside. The dominant elements in PM1 both indoors and outdoors were S, Cl, K, and Zn. PM2.5 and PM10 fractions inside the school were clearly enriched in elements of mineral origin, additionally S, Zn, K and Cl were also present in high concentrations both indoors and outdoors. Results suggested that a significant contribution to indoor Zn, Pb and S concentrations in the PM2.5 fraction was from penetration of outdoor air. 88%, 80% and 90% of the observed total variations in indoor concentrations of Zn, Pb, and S were explained by the linear relationship between indoor and outdoor concentrations. The lack of correlation between indoor and outdoor concentrations obtained for Si, Ca, Ti, Sr indicated that these metals were more likely to originate from indoor sources. (C) 2013 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000321423500017	Publication Date	2013-05-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0360-1323	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:109788			Serial	8087
Permanent link to this record



	Author	Leenaerts, O.; Partoens, B.; Peeters, F.M.
	Title	Tunable double Dirac cone spectrum in bilayer \alpha-graphyne			Type	A1 Journal article
	Year	2013	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	103	Issue	1	Pages	013105-4
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Monolayer alpha-graphyne was recently proposed as a new all-carbon material having an electronic spectrum consisting of Dirac cones. Based on a first-principles investigation of bilayer alpha-graphyne, we show that the electronic band structure is qualitatively different from its monolayer form and depends crucially on the stacking mode of the two layers. Two stable stacking modes are found: a configuration with a gapless parabolic band structure, similar to AB stacked bilayer graphene, and another one which exhibits a doubled Dirac-cone spectrum. The latter can be tuned by an electric field with a gap opening rate of 0.3 eA. (C) 2013 AIP Publishing LLC.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000321497200032	Publication Date	2013-07-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	58	Open Access
	Notes	; This work was supported by the Flemish Science Foundation (FWO-Vl), the NOI-BOF of the University of Antwerp, and the ESF EuroGRAPHENE project CONGRAN. ;			Approved	Most recent IF: 3.411; 2013 IF: 3.515
	Call Number	UA @ lucian @ c:irua:109821			Serial	3740
Permanent link to this record



	Author	Nuyts, G.; Cagno, S.; Hellemans, K.; Veronesi, G.; Cotte, M.; Janssens, K.
	Title	Study of the early stages of Mn intrusion in corroded glass by means of combined SR FTIR/\muXRF imaging and XANES spectroscopy			Type	P1 Proceeding
	Year	2013	Publication	Procedia Chemistry T2 – Youth in Conservation of Cultural Heritage Conference (YOCOCU), June 18-20, 2012, University of Antwerp, Antwerp, Belgium	Abbreviated Journal
	Volume		Issue		Pages	239-247
	Keywords	P1 Proceeding; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	Historical glass, especially medieval glass, can undergo weathering under the influence of time and environmental conditions. The aim of this investigation was to better understand the processes involved in this natural degradation process by studying artificially altered glass samples prepared for the use of evaluation of conservation methods. Non-durable glass sensors produced by the Fraunhofer Institute (type M1.0) were used as a starting material for artificial alteration. These were immersed in acidic (pH = 0, 2, 4) and neutral solutions (1 h – 8 h). In a second stage the glass samples were immersed in a 0.5 M MnCl2 solution (24 h, 48 h and 72 h), allowing intrusion of Mn from the solution into the gel layer. The samples were characterized at different stages with reflectance FTIR spectroscopy, mu XRF mapping and mu XANES. All measurements were carried out at ESRF, beamline ID21. Reflectance FTIR spectroscopy measurements were performed in the 800 4000 cm(-1) range. Cluster analysis of the resulting maps evidenced the rapid growth of the gel layer in strong acidic conditions. The average spectra for each cluster feature show for the original glass a strong Si-O- stretching band between 900 and 1000 cm(-1), whereas the gel layer could be identified by the increasing Si-O-Si bands around 1100 and 1250 cm(-1). mu XRF maps were recorded at different stages of the experiment at energies around the Mn-K edge (6.539 keV) and with a step size of 2 by 2 m. These confirm the leaching of K+ and Ca+2 from the glass and the intrusion of Mn from the solution. Mn was found throughout the entire gel layer, but with a concentration gradient peaking at the surface. XANES point measurements were recorded at various points where Mn was present. No spatial variation was found, but linear combination fitting of the spectra with various Mn reference compounds indicated that Mn2+Mn23+O4 is the main Mn compound in the gel layer, as was hypothesised by Watkinson et al. The standard corroded glass samples studied here can be used for the evaluation of conservation treatments in follow-up experiments. (C) 2013 The Authors. Published by Elsevier B.V. Selection and peer-review under responsibility of the IA-CS (Italian Association of Conservation Scientists) and University of Antwerp
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000321673900030	Publication Date	2013-04-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume	8	Series Issue		Edition
	ISSN	1876-6196	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	4	Open Access
	Notes	; This research was supported by the Interuniversity Attraction Poles Programme – Belgian Science Policy (IUAP VI/16). The text also presents results of GOA XANES “meets ELNES” (Research Fund University of Antwerp, Belgium) and from FWO (Brussels, Belgium) projects no. G.0704.08 and G.01769.09. We gratefully acknowledge ESRF for granting beamtime (experiment EC873). ;			Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:109871			Serial	5851
Permanent link to this record



	Author	Elliott, J.A.; Shibuta, Y.; Amara, H.; Bichara, C.; Neyts, E.C.
	Title	Atomistic modelling of CVD synthesis of carbon nanotubes and graphene			Type	A1 Journal article
	Year	2013	Publication	Nanoscale	Abbreviated Journal	Nanoscale
	Volume	5	Issue	15	Pages	6662-6676
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	We discuss the synthesis of carbon nanotubes (CNTs) and graphene by catalytic chemical vapour deposition (CCVD) and plasma-enhanced CVD (PECVD), summarising the state-of-the-art understanding of mechanisms controlling their growth rate, chiral angle, number of layers (walls), diameter, length and quality (defects), before presenting a new model for 2D nucleation of a graphene sheet from amorphous carbon on a nickel surface. Although many groups have modelled this process using a variety of techniques, we ask whether there are any complementary ideas emerging from the different proposed growth mechanisms, and whether different modelling techniques can give the same answers for a given mechanism. Subsequently, by comparing the results of tight-binding, semi-empirical molecular orbital theory and reactive bond order force field calculations, we demonstrate that graphene on crystalline Ni(111) is thermodynamically stable with respect to the corresponding amorphous metal and carbon structures. Finally, we show in principle how a complementary heterogeneous nucleation step may play a key role in the transformation from amorphous carbon to graphene on the metal surface. We conclude that achieving the conditions under which this complementary crystallisation process can occur may be a promising method to gain better control over the growth processes of both graphene from flat metal surfaces and CNTs from catalyst nanoparticles.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000321675600003	Publication Date	2013-06-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2040-3364;2040-3372;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.367	Times cited	52	Open Access
	Notes				Approved	Most recent IF: 7.367; 2013 IF: 6.739
	Call Number	UA @ lucian @ c:irua:109231			Serial	200
Permanent link to this record



	Author	Gomez, A.; Gonzalez, E.M.; Gilbert, D.A.; Milošević, M.V.; Liu, K.; Vicent, J.L.
	Title	Probing the dynamic response of antivortex, interstitial and trapped vortex lattices on magnetic periodic pinning potentials			Type	A1 Journal article
	Year	2013	Publication	Superconductor science and technology	Abbreviated Journal	Supercond Sci Tech
	Volume	26	Issue	8	Pages	085018-8
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	The dynamics of the pinned vortex, antivortex and interstitial vortex have been studied in superconducting/magnetic hybrids consisting of arrays of Co/Pd multilayer nanodots embedded in Nb films. The magnetic nanodots show out-of-plane magnetization at the remanent state. This magnetic state allows for superconducting vortex lattices of different types in an applied homogeneous magnetic field. We experimentally and theoretically show three such lattices: (i) a lattice containing only antivortices; (ii) a vortex lattice entirely pinned on the dots; and (iii) a vortex lattice with pinned and interstitial vortices. Between the flux creep (low vortex velocity) and the free flux flow (high vortex velocity) regimes the interaction between the magnetic array and the vortex lattice governs the vortex dynamics, which in turn enables distinguishing experimentally the type of vortex lattice which governs the dissipation. We show that the vortex lattice with interstitial vortices has the highest onset velocity where the lattice becomes ordered, whereas the pinned vortex lattice has the smallest onset velocity. Further, for this system, we directly estimate that the external force needed to depin vortices is 60% larger than the one needed to depin antivortices; therefore we are able to decouple the antivortex-vortex motion.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000321709400024	Publication Date	2013-07-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0953-2048;1361-6668;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.878	Times cited	7	Open Access
	Notes	; This work was supported by Spanish MINECO, grants FIS2008-06249 (Grupo Consolidado), Consolider CSD2007-00010 and CAM grant S2009/MAT-1726. MVM acknowledges support from FWO-Vlaanderen. Work at UCD was supported by the US NSF (DMR-1008791 and ECCS-0925626). ;			Approved	Most recent IF: 2.878; 2013 IF: 2.796
	Call Number	UA @ lucian @ c:irua:109785			Serial	2716
Permanent link to this record



	Author	Autrique, D.; Clair, G.; L'Hermite, D.; Alexiades, V.; Bogaerts, A.; Rethfeld, B.
	Title	The role of mass removal mechanisms in the onset of ns-laser induced plasma formation			Type	A1 Journal article
	Year	2013	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	114	Issue	2	Pages	023301-23310
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The present study focuses on the role of mass removal mechanisms in ns-laser ablation. A copper sample is placed in argon, initially set at standard pressure and temperature. Calculations are performed for a 6 ns laser pulse with a wavelength of 532 nm and laser fluences up to 10 J/cm2. The transient behavior in and above the copper target is described by a hydrodynamic model. Transmission profiles and ablation depths are compared with experimental results and similar trends are found. Our calculations reveal an interesting self-inhibiting mechanism: volumetric mass removal in the supercritical region triggers plasma shielding and therefore stops proceeding. This self-limiting process indicates that volumetric mass removal does not necessarily result in large ablation depths.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000321761600006	Publication Date	2013-07-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	31	Open Access
	Notes				Approved	Most recent IF: 2.068; 2013 IF: 2.185
	Call Number	UA @ lucian @ c:irua:109237			Serial	2915
Permanent link to this record



	Author	Gómez-Graña, S.; Goris, B.; Altantzis, T.; Fernández-López, C.; Carbó-Argibay, E.; Guerrero-Martínez, A.; Almora-Barrios, N.; López, N.; Pastoriza-Santos, I.; Pérez-Juste, J.; Bals, S.; Van Tendeloo, G.; Liz-Marzán, L.M.;
	Title	Au@Ag nanoparticles : halides stabilize {100} facets			Type	A1 Journal article
	Year	2013	Publication	The journal of physical chemistry letters	Abbreviated Journal	J Phys Chem Lett
	Volume	4	Issue	13	Pages	2209-2216
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Seed-mediated growth is the most efficient methodology to control the size and shape of colloidal metal nanoparticles. In this process, the final nanocrystal shape is defined by the crystalline structure of the initial seed as well as by the presence of ligands and other additives that help to stabilize certain crystallographic facets. We analyze here the growth mechanism in aqueous solution of silver shells on presynthesized gold nanoparticles displaying various well-defined crystalline structures and morphologies. A thorough three-dimensional electron microscopy characterization of the morphology and internal structure of the resulting core-shell nanocrystals indicates that {100} facets are preferred for the outer silver shell, regardless of the morphology and crystallinity of the gold cores. These results are in agreement with theoretical analysis based on the relative surface energies of the exposed facets in the presence of halide ions.
	Address
	Corporate Author				Thesis
	Publisher	American Chemical Society	Place of Publication	Washington, D.C	Editor
	Language		Wos	000321809500018	Publication Date	2013-06-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1948-7185;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.353	Times cited	131	Open Access
	Notes	267867 Plasmaquo; 246791 COUNTATOMS; 262348 ESMI; FWO			Approved	Most recent IF: 9.353; 2013 IF: 6.687
	Call Number	UA @ lucian @ c:irua:109811			Serial	204
Permanent link to this record



	Author	Abakumov, A.M.; Erni, R.; Tsirlin, A.A.; Rossell, M.D.; Batuk, D.; Nénert, G.; Van Tendeloo, G.
	Title	Frustrated octahedral tilting distortion in the incommensurately modulated Li_3xNd_2/3-xTiO₃ perovskites			Type	A1 Journal article
	Year	2013	Publication	Chemistry of materials	Abbreviated Journal	Chem Mater
	Volume	25	Issue	13	Pages	2670-2683
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Perovskite-structured titanates with layered A-site ordering form remarkably complex superstructures. Using transmission electron microscopy, synchrotron X-ray and neutron powder diffraction, and ab initio structure relaxation, we present the structural solution of the incommensurately modulated Li3xNd2/3xTiO3 perovskites (x = 0.05, superspace group Pmmm(α1,1/2,0)000(1/2,β2 0)000, a = 3.831048(5) Å, b = 3.827977(4) Å, c = 7.724356(8) Å, q1 = 0.45131(8)a* + 1/2b, q2 = 1/2a + 0.41923(4)b*). In contrast to earlier conjectures on the nanoscale compositional phase separation in these materials, all peculiarities of the superstructure can be understood in terms of displacive modulations related to an intricate octahedral tilting pattern. It involves fragmenting the pattern of the out-of-phase tilted TiO6 octahedra around the a- and b-axes into antiphase domains, superimposed on the pattern of domains with either pronounced or suppressed in-phase tilt component around the c-axis. The octahedral tilting competes with the second order JahnTeller distortion of the TiO6 octahedra. This competition is considered as the primary driving force for the modulated structure. The A cations are suspected to play a role in this modulation affecting it mainly through the tolerance factor and the size variance. The reported crystal structure calls for a revision of the structure models proposed for the family of layered A-site ordered perovskites exhibiting a similar type of modulated structure.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000321809700015	Publication Date	2013-06-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0897-4756;1520-5002;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.466	Times cited	23	Open Access
	Notes	Countatoms			Approved	Most recent IF: 9.466; 2013 IF: 8.535
	Call Number	UA @ lucian @ c:irua:109216			Serial	1292
Permanent link to this record



	Author	Leenaerts, O.; Sahin, H.; Partoens, B.; Peeters, F.M.
	Title	First-principles investigation of B- and N-doped fluorographene			Type	A1 Journal article
	Year	2013	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	88	Issue	3	Pages	035434-35435
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	The effect of substitutional doping of fluorographene with boron and nitrogen atoms on its electronic and magnetic properties is investigated using first-principles calculations. It is found that boron dopants can be readily incorporated in the fluorographene crystal where they act as shallow acceptors and cause hole doping, but no changes in the magnetic properties are observed. Nitrogen dopants act as deep donors and give rise to a magnetic moment, but the resulting system becomes chemically unstable. These results are opposite to what was found for substitutional doping of graphane, i.e., hydrogenated graphene, in which case B substituents induce magnetism and N dopants do not.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000322083700002	Publication Date	2013-07-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	16	Open Access
	Notes	; This work was supported by the Flemish Science Foundation (FWO-Vl) and the Methusalem program of the Flemish government. H.S. is supported by a FWO Pegasus-long Marie Curie Fellowship. Computational resources were provided by TUBITAK ULAKBIM, High Performance and Grid Computing Center (TR-Grid e-Infrastructure), and the HPC infrastructure of the University of Antwerp (CalcUA), a division of the Flemish Supercomputer Center VSC. ;			Approved	Most recent IF: 3.836; 2013 IF: 3.664
	Call Number	UA @ lucian @ c:irua:109807			Serial	1210
Permanent link to this record



	Author	Abakumov, A.M.; Batuk, M.; Tsirlin, A.A.; Tyablikov, O.A.; Sheptyakov, D.V.; Filimonov, D.S.; Pokholok, K.V.; Zhidal, V.S.; Rozova, M.G.; Antipov, E.V.; Hadermann, J.; Van Tendeloo, G.;
	Title	Structural and magnetic phase transitions in the A_nB_nO_3n-2 anion-deficient perovskites Pb₂Ba₂BiFe₅O₁₃ and Pb_1.5Ba_2.5Bi₂Fe₆O₁₆			Type	A1 Journal article
	Year	2013	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	52	Issue	14	Pages	7834-7843
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Novel anion-deficient perovskite-based ferrites Pb2Ba2BiFe5O13 and Pb1.5Ba2.5Bi2Fe6O16 were synthesized by solid-state reaction in air. Pb2Ba2BiFe5O13 and Pb1.5Ba2.5Bi2Fe6O16 belong to the perovskite-based AnBnO3n2 homologous series with n = 5 and 6, respectively, with a unit cell related to the perovskite subcell ap as ap√2 × ap × nap√2. Their structures are derived from the perovskite one by slicing it with 1/2[110]p(1̅01)p crystallographic shear (CS) planes. The CS operation results in (1̅01)p-shaped perovskite blocks with a thickness of (n 2) FeO6 octahedra connected to each other through double chains of edge-sharing FeO5 distorted tetragonal pyramids which can adopt two distinct mirror-related configurations. Ordering of chains with a different configuration provides an extra level of structure complexity. Above T ≈ 750 K for Pb2Ba2BiFe5O13 and T ≈ 400 K for Pb1.5Ba2.5Bi2Fe6O16 the chains have a disordered arrangement. On cooling, a second-order structural phase transition to the ordered state occurs in both compounds. Symmetry changes upon phase transition are analyzed using a combination of superspace crystallography and group theory approach. Correlations between the chain ordering pattern and octahedral tilting in the perovskite blocks are discussed. Pb2Ba2BiFe5O13 and Pb1.5Ba2.5Bi2Fe6O16 undergo a transition into an antiferromagnetically (AFM) ordered state, which is characterized by a G-type AFM ordering of the Fe magnetic moments within the perovskite blocks. The AFM perovskite blocks are stacked along the CS planes producing alternating FM and AFM-aligned FeFe pairs. In spite of the apparent frustration of the magnetic coupling between the perovskite blocks, all n = 4, 5, 6 AnFenO3n2 (A = Pb, Bi, Ba) feature robust antiferromagnetism with similar Néel temperatures of 623632 K.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000322087100006	Publication Date	2013-02-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	10	Open Access
	Notes	Countatoms			Approved	Most recent IF: 4.857; 2013 IF: 4.794
	Call Number	UA @ lucian @ c:irua:109213			Serial	3196
Permanent link to this record



	Author	Kirsanova, M.A.; Mori, T.; Maruyama, S.; Abakumov, A.M.; Van Tendeloo, G.; Olenev, A.; Shevelkov, A.V.
	Title	Cationic clathrate of type-III Ge_172-xP_xTe_y (y\approx21,5, x\approx2y) : synthesis, crystal structure and thermoelectric properties			Type	A1 Journal article
	Year	2013	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	52	Issue	14	Pages	8272-8279
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A first germanium-based cationic clathrate of type-III, Ge129.3P42.7Te21.53, was synthesized and structurally characterized (space group P42/mnm, a = 19.948(3) Å, c = 10.440(2) Å, Z = 1). In its crystal structure, germanium and phosphorus atoms form three types of polyhedral cages centered with Te atoms. The polyhedra share pentagonal and hexagonal faces to form a 3D framework. Despite the complexity of the crystal structure, the Ge129.3P42.7Te21.53 composition corresponds to the Zintl counting scheme with a good accuracy. Ge129.3P42.7Te21.53 demonstrates semiconducting/insulating behavior of electric resistivity, high positive Seebeck coefficient (500 μV K1 at 300 K), and low thermal conductivity (<0.92 W m1 K1) within the measured temperature range.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000322087100052	Publication Date	2013-06-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	3	Open Access
	Notes	Countatoms			Approved	Most recent IF: 4.857; 2013 IF: 4.794
	Call Number	UA @ lucian @ c:irua:109214			Serial	301
Permanent link to this record



	Author	Sahin, H.; Sivek, J.; Li, S.; Partoens, B.; Peeters, F.M.
	Title	Stone-Wales defects in silicene : formation, stability, and reactivity of defect sites			Type	A1 Journal article
	Year	2013	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	88	Issue	4	Pages	045434-45436
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	During the synthesis of ultrathin materials with hexagonal lattice structure Stone-Wales (SW) type of defects are quite likely to be formed and the existence of such topological defects in the graphenelike structures results in dramatic changes of their electronic and mechanical properties. Here we investigate the formation and reactivity of such SW defects in silicene. We report the energy barrier for the formation of SW defects in freestanding (similar to 2.4 eV) and Ag(111)-supported (similar to 2.8 eV) silicene and found it to be significantly lower than in graphene (similar to 9.2 eV). Moreover, the buckled nature of silicene provides a large energy barrier for the healing of the SW defect and therefore defective silicene is stable even at high temperatures. Silicene with SW defects is semiconducting with a direct band gap of 0.02 eV and this value depends on the concentration of defects. Furthermore, nitrogen substitution in SW-defected silicene shows that the defect lattice sites are the least preferable substitution locations for the N atoms. Our findings show the easy formation of SW defects in silicene and also provide a guideline for band gap engineering in silicene-based materials through such defects.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000322113300007	Publication Date	2013-07-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	93	Open Access
	Notes	; This work was supported by the Flemish Science Foundation (FWO-Vl) and the Methusalem foundation of the Flemish government. Computational resources were provided by TUBITAK ULAKBIM, High Performance and Grid Computing Center (TR-Grid e-Infrastructure), and HPC infrastructure of the University of Antwerp (CalcUA) a division of the Flemish Supercomputer Center (VSC), which is funded by the Hercules foundation. H.S. is supported by a FWO Pegasus Marie Curie Fellowship. ;			Approved	Most recent IF: 3.836; 2013 IF: 3.664
	Call Number	UA @ lucian @ c:irua:109805			Serial	3162
Permanent link to this record



	Author	Lu, Y.-G.; Turner, S.; Verbeeck, J.; Janssens, S.D.; Haenen, K.; Van Tendeloo, G.
	Title	Local bond length variations in boron-doped nanocrystalline diamond measured by spatially resolved electron energy-loss spectroscopy			Type	A1 Journal article
	Year	2013	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	103	Issue	3	Pages	032105-5
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Variations in local bond length and coordination in boron-doped nanocrystalline diamond (NCD) films have been studied through changes in the fine structure of boron and carbon K-edges in electron energy-loss spectra, acquired in a scanning transmission electron microscope. The presence of high concentrations of B in pristine diamond regions and enrichment of B at defects in single NCD grains is demonstrated. Local bond length variations are evidenced through an energy shift of the carbon 1s → σ* edge at B-rich defective regions within single diamond grains, indicating an expansion of the diamond bond length at sites with local high B content.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000322146300049	Publication Date	2013-07-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	15	Open Access
	Notes	Iap P6/42; Fwo G056810n; 262348 Esmi; 246791 Countatoms; 278510 Vortex; Fwo ECASJO_;			Approved	Most recent IF: 3.411; 2013 IF: 3.515
	Call Number	UA @ lucian @ c:irua:109210UA @ admin @ c:irua:109210			Serial	1824
Permanent link to this record



	Author	Li, D.Y.; Zeng, Y.J.; Pereira, L.M.C.; Batuk, D.; Hadermann, J.; Zhang, Y.Z.; Ye, Z.Z.; Temst, K.; Vantomme, A.; Van Bael, M.J.; Van Haesendonck, C.;
	Title	Anisotropic magnetism and spin-dependent transport in Co nanoparticle embedded ZnO thin films			Type	A1 Journal article
	Year	2013	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	114	Issue	3	Pages	033909-6
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Oriented Co nanoparticles were obtained by Co ion implantation in crystalline ZnO thin films grown by pulsed laser deposition. Transmission electron microscopy revealed the presence of elliptically shaped Co precipitates with nanometer size, which are embedded in the ZnO thin films, resulting in anisotropic magnetic behavior. The low-temperature resistance of the Co-implanted ZnO thin films follows the Efros-Shklovskii type variable-range-hopping. Large negative magnetoresistance (MR) exceeding 10% is observed in a magnetic field of 1 T at 2.5K and the negative MR survives up to 250K (0.3%). The negative MR reveals hysteresis as well as anisotropy that correlate well with the magnetic properties, clearly demonstrating the presence of spin-dependent transport. (C) 2013 AIP Publishing LLC.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000322202700071	Publication Date	2013-07-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	10	Open Access
	Notes				Approved	Most recent IF: 2.068; 2013 IF: 2.185
	Call Number	UA @ lucian @ c:irua:110765			Serial	126
Permanent link to this record



	Author	Roland, M.; Serrano-Ortiz, P.; Kowalski, A.S.; Van Grieken, R.; Janssens, I.A.; et al.
	Title	Atmospheric turbulence triggers pronounced diel pattern in karst carbonate geochemistry			Type	A1 Journal article
	Year	2013	Publication	Biogeosciences	Abbreviated Journal
	Volume	10	Issue	7	Pages	5009-5017
	Keywords	A1 Journal article; Plant and Ecosystems (PLECO) – Ecology in a time of change; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	CO2 exchange between terrestrial ecosystems and the atmosphere is key to understanding the feedbacks between climate change and the land surface. In regions with carbonaceous parent material, CO2 exchange patterns occur that cannot be explained by biological processes, such as disproportionate outgassing during the daytime or night-time CO2 uptake during periods when all vegetation is senescent. Neither of these phenomena can be attributed to carbonate weathering reactions, since their CO2 exchange rates are too small. Soil ventilation induced by high atmospheric turbulence is found to explain atypical CO2 exchange between carbonaceous systems and the atmosphere. However, by strongly altering subsurface CO2 concentrations, ventilation can be expected to influence carbonate weathering rates. By imposing ventilation-driven CO2 outgassing in a carbonate weathering model, we show here that carbonate geochemistry is accelerated and does play a surprisingly large role in the observed CO2 exchange pattern of a semi-arid ecosystem. We found that by rapidly depleting soil CO2 during the daytime, ventilation disturbs soil carbonate equilibria and therefore strongly magnifies daytime carbonate precipitation and associated CO2 production. At night, ventilation ceases and the depleted CO2 concentrations increase steadily. Dissolution of carbonate is now enhanced, which consumes CO2 and largely compensates for the enhanced daytime carbonate precipitation. This is why only a relatively small effect on global carbonate weathering rates is to be expected. On the short term, however, ventilation has a drastic effect on synoptic carbonate weathering rates, resulting in a pronounced diel pattern that exacerbates the non-biological behavior of soil-atmosphere CO2 exchanges in dry regions with carbonate soils.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000322242700039	Publication Date	2013-07-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1726-4170; 1726-4189	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:109862			Serial	7533
Permanent link to this record