NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	421–450 of 718 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 >>

List View

Citations

Details

	Records
	Author	Bogaerts, A.; Aerts, R.; Snoeckx, R.; Somers, W.; Van Gaens, W.; Yusupov, M.; Neyts, E.
	Title	Modeling of plasma and plasma-surface interactions for medical, environmental and nano applications			Type	A1 Journal article
	Year	2012	Publication	Journal of physics : conference series	Abbreviated Journal
	Volume	399	Issue		Pages	012011
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, an overview is given of modeling investigations carried out in our research group for a better understanding of plasmas used for medical, environmental and nano applications. The focus is both on modeling the plasma chemistry and the plasma-surface interactions. The plasma chemistry provides the densities and fluxes of the important plasma species. This information can be used as input when modeling the plasma-surface interactions. The combination of plasma simulations and plasma – surface interaction simulations provides a more comprehensive understanding of the underlying processes for these applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000312261700011	Publication Date	2012-11-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1742-6588;1742-6596;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	7	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:104727			Serial	2130
Permanent link to this record



	Author	Zhang, Y.-R.; Bogaerts, A.; Wang, Y.-N.
	Title	Fluid simulation of the phase-shift effect in Ar/CF₄ capacitively coupled plasmas			Type	A1 Journal article
	Year	2012	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	45	Issue	48	Pages	485204
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A two-dimensional self-consistent fluid model combined with the full set of Maxwell equations is employed to investigate an Ar/CF4 capacitively coupled plasma, focusing on the phase-shift effect on the plasma characteristics at various frequencies and gas mixture ratios. When the discharge is sustained by a single frequency at 13.56 MHz in an Ar/CF4 mixture with a ratio of 0.9/0.1, no obvious difference is detected between the electron densities obtained in the so-called electrostatic model (with only the static electric fields taken into account) and the electromagnetic model (which includes the electromagnetic effects). However, as the frequency increases to 60 and 100 MHz, the difference becomes distinct, due to the significant influence of the electromagnetic effects. The phase-shift effect on the plasma radial uniformity has also been investigated in a dual frequency discharge, i.e. when the top driven source is switched on with a phase difference phiv ranging from 0 to π, in the frequency range 13.56100 MHz. At low concentration of CF4 (10%), Ar+ ions are the major positive ions in the entire range of frequencies. When the frequency is low, i.e. 13.56 MHz, the Ar+ density exhibits an off-axis peak at phiv = 0 due to the edge effect, and a better uniformity caused by the phase-shift modulation is obtained at phiv = π. At 60 MHz, the Ar+ density varies from edge-peaked at phiv = 0 to uniform (i.e. at phiv = 0.53π), and finally at phiv = π, a broad maximum is observed at the centre due to the standing-wave effect. As the frequency increases to 100 MHz, the best radial uniformity is reached at 0.25π, and the maximum moves again towards the radial wall in the reverse-phase case (phiv = π) due to the dominant skin effect. When the frequency is fixed at 100 MHz, the phase-shift control shows a different behaviour at a high concentration of CF4. For instance, the ${\rm CF}_3
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000311148300011	Publication Date	2012-11-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	8	Open Access
	Notes				Approved	Most recent IF: 2.588; 2012 IF: 2.528
	Call Number	UA @ lucian @ c:irua:101754			Serial	1232
Permanent link to this record



	Author	Aerts, R.; Martens, T.; Bogaerts, A.
	Title	Influence of vibrational states on CO₂ splitting by dielectric barrier discharges			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	44	Pages	23257-23273
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, the splitting of CO2 in a pulsed plasma system, such as a dielectric barrier discharge (DBD), is evaluated from a chemical point of view by means of numerical modeling. For this purpose, a chemical reaction set of CO2 in an atmospheric pressure plasma is developed, including the vibrational states of CO2, O2, and CO. The simulated pulses are matched to the conditions of a filament (or microdischarge) and repeated with intervals of 1 μs. The influence of vibrationally excited CO2 as well as other neutral species, ions, and electrons on the CO2 splitting is discussed. Our calculations predict that the electrons have the largest contribution to the CO2 splitting at the conditions under study, by electron impact dissociation. The contribution of vibrationally excited CO2 levels in the splitting of CO2 is found be 6.4%, when only considering one microdischarge pulse and its afterglow, but it can be much higher for consecutive discharge pulses, as is typical for a filamentary DBD, when the interpulse time is short enough and accumulation effects in the vibrationally excited CO2 densities can occur.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000310769300012	Publication Date	2012-10-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	112	Open Access
	Notes				Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:101764			Serial	1659
Permanent link to this record



	Author	Yusupov, M.; Neyts, E.C.; Khalilov, U.; Snoeckx, R.; van Duin, A.C.T.; Bogaerts, A.
	Title	Atomic-scale simulations of reactive oxygen plasma species interacting with bacterial cell walls			Type	A1 Journal article
	Year	2012	Publication	New journal of physics	Abbreviated Journal	New J Phys
	Volume	14	Issue	9	Pages	093043
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In recent years there has been growing interest in the use of low-temperature atmospheric pressure plasmas for biomedical applications. Currently, however, there is very little fundamental knowledge regarding the relevant interaction mechanisms of plasma species with living cells. In this paper, we investigate the interaction of important plasma species, such as O3, O2 and O atoms, with bacterial peptidoglycan (or murein) by means of reactive molecular dynamics simulations. Specifically, we use the peptidoglycan structure to model the gram-positive bacterium Staphylococcus aureus murein. Peptidoglycan is the outer protective barrier in bacteria and can therefore interact directly with plasma species. Our results demonstrate that among the species mentioned above, O3 molecules and especially O atoms can break important bonds of the peptidoglycan structure (i.e. CO, CN and CC bonds), which subsequently leads to the destruction of the bacterial cell wall. This study is important for gaining a fundamental insight into the chemical damaging mechanisms of the bacterial peptidoglycan structure on the atomic scale.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000309393400001	Publication Date	2012-09-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1367-2630;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.786	Times cited	47	Open Access
	Notes				Approved	Most recent IF: 3.786; 2012 IF: 4.063
	Call Number	UA @ lucian @ c:irua:101014			Serial	189
Permanent link to this record



	Author	Somers, W.; Bogaerts, A.; van Duin, A.C.T.; Neyts, E.C.
	Title	Plasma species interacting with nickel surfaces : toward an atomic scale understanding of plasma-catalysis			Type	A1 Journal article
	Year	2012	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	116	Issue	39	Pages	20958-20965
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The adsorption probability and reaction behavior of CHx plasma species on various nickel catalyst surfaces is investigated by means of reactive molecular dynamics (MD) simulations using the ReaxFF potential. Such catalysts are used in the reforming of hydrocarbons and in the growth of carbon nanotubes, and further insight in the underlying mechanisms of these processes is needed to increase their applicability. Single and consecutive impacts of CHx radicals (x={1,2,3}) were performed on four different Ni surfaces, at a temperature of 400 K. The adsorption probability is shown to be related to the number of free electrons, i.e. a higher number leads to more adsorptions, and the steric hindrance caused by the hydrogen atoms bonded to the impacting CHx species. Furthermore, some of the CH bonds break after adsorption, which generally leads to diffusion of the hydrogen atom over the surface. Additionally, these adsorbed H-atoms can be used in reactions to form new molecules, such as CH4 and C2Hx, although this is dependent on the precise morphology of the surface. New molecules are also formed by subtraction of H-atoms from adsorbed radicals, leading to occasional formation of H2 and C2Hx molecules.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000309375700040	Publication Date	2012-09-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	37	Open Access
	Notes				Approved	Most recent IF: 4.536; 2012 IF: 4.814
	Call Number	UA @ lucian @ c:irua:101522			Serial	2640
Permanent link to this record



	Author	Liu, Y.-X.; Zhang, Q.-Z.; Liu, J.; Song, Y.-H.; Bogaerts, A.; Wang, Y.-N.
	Title	Effect of bulk electric field reversal on the bounce resonance heating in dual-frequency capacitively coupled electronegative plasmas			Type	A1 Journal article
	Year	2012	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	101	Issue	11	Pages	114101
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The electron bounce resonance heating (BRH) in dual-frequency capacitively coupled plasmas operated in oxygen and argon has been studied by different experimental methods. In comparison with the electropositive argon discharge, the BRH in an electronegative discharge occurs at larger electrode gaps. Kinetic particle simulations reveal that in the oxygen discharge, the bulk electric field becomes quite strong and is out of phase with the sheath field. Therefore, it retards the resonant electrons when traversing the bulk, resulting in a suppressed BRH. This effect becomes more pronounced at lower high-frequency power, when the discharge mode changes from electropositive to electronegative.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000309329300094	Publication Date	2012-09-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	26	Open Access
	Notes				Approved	Most recent IF: 3.411; 2012 IF: 3.794
	Call Number	UA @ lucian @ c:irua:100637			Serial	802
Permanent link to this record



	Author	Mortet, V.; Zhang, L.; Eckert, M.; D'Haen, J.; Soltani, A.; Moreau, M.; Troadec, D.; Neyts, E.; De Jaeger, J.C.; Verbeeck, J.; Bogaerts, A.; Van Tendeloo, G.; Haenen, K.; Wagner, P.
	Title	Grain size tuning of nanocrystalline chemical vapor deposited diamond by continuous electrical bias growth : experimental and theoretical study			Type	A1 Journal article
	Year	2012	Publication	Physica status solidi : A : applications and materials science	Abbreviated Journal	Phys Status Solidi A
	Volume	209	Issue	9	Pages	1675-1682
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this work, a detailed structural and spectroscopic study of nanocrystalline diamond (NCD) thin films grown by a continuous bias assisted CVD growth technique is reported. This technique allows the tuning of grain size and phase purity in the deposited material. The crystalline properties of the films are characterized by SEM, TEM, EELS, and Raman spectroscopy. A clear improvement of the crystalline structure of the nanograined diamond film is observed for low negative bias voltages, while high bias voltages lead to thin films consisting of diamond grains of only ∼10 nm nanometer in size, showing remarkable similarities with so-called ultrananocrystalline diamond. These layers arecharacterized by an increasing amount of sp2-bonded carbon content of the matrix in which the diamond grains are embedded. Classical molecular dynamics simulations support the observed experimental data, giving insight in the underlying mechanism for the observed increase in deposition rate with bias voltage. Furthermore, a high atomic concentration of hydrogen has been determined in these films. Finally, Raman scattering analyses confirm that the Raman line observed at ∼1150 cm−1 cannot be attributed to trans-poly-acetylene, which continues to be reported in literature, reassigning it to a deformation mode of CHx bonds in NCD.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000308942100009	Publication Date	2012-09-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1862-6300;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.775	Times cited	31	Open Access
	Notes	M.E. and E.N. acknowledge financial support from, respectively, the Institute for Promotion of Innovation through Science and Technology in Flanders (IWT), and the Research Foundation-Flanders (FWO). J.V. gratefully acknowledges financial support from the GOA project “XANES meets ELNES” of the research fund of the University of Antwerp. Calculation support was provided by the University of Antwerp through the core facility CALCUA. G.V.T. acknowledges the ERC grant COUNTATOMS. The work was also financially supported by the joint UAUHasseltMethusalem “NANO” network, the Research Programs G.0068.07 and G.0555.10N of the Research Foundation-Flanders (FWO), the IAP-P6/42 project “Quantum Effects in Clusters and Nanowires”, and by the EU FP7 through the Integrated Infrastructure Initiative “ESMI” (No. 262348), the Marie Curie ITN “MATCON” (PITN-GA-2009-238201), and the Collaborative Project “DINAMO” (No. 245122).			Approved	Most recent IF: 1.775; 2012 IF: 1.469
	Call Number	UA @ lucian @ c:irua:101516UA @ admin @ c:irua:101516			Serial	1364
Permanent link to this record



	Author	Aerts, R.; Tu, X.; De Bie, C.; Whitehead, J.C.; Bogaerts, A.
	Title	An investigation into the dominant reactions for ethylene destruction in non-thermal atmospheric plasmas			Type	A1 Journal article
	Year	2012	Publication	Plasma processes and polymers	Abbreviated Journal	Plasma Process Polym
	Volume	9	Issue	10	Pages	994-1000
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A crucial step, which is still not well understood in the destruction of volatile organic compounds (VOCs) with low temperature plasmas, is the initiation of the process. Here, we present a kinetic model for the destruction of ethylene in low temperature plasmas that allows us to calculate the relative importance of all plasma species and their related reactions. Modifying the ethylene concentration and/or the SED had a major impact on the relative importance of the radicals (i.e., mainly atomic oxygen) and the metastable nitrogen (i.e., more specifically N2(equation image)) in the destruction process. Our results show that the direct destruction by electron impact reactions for ethylene can be neglected; however, we can certainly not neglect the influence of N2(equation image)).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000309750300008	Publication Date	2012-07-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1612-8850;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.846	Times cited	46	Open Access
	Notes				Approved	Most recent IF: 2.846; 2012 IF: 3.730
	Call Number	UA @ lucian @ c:irua:101765			Serial	1727
Permanent link to this record



	Author	Yusupov, M.; Saraiva, M.; Depla, D.; Bogaerts, A.
	Title	Sputter deposition of Mg_xAl_yO_z thin films in a dual-magnetron device : a multi-species Monte Carlo model			Type	A1 Journal article
	Year	2012	Publication	New journal of physics	Abbreviated Journal	New J Phys
	Volume	14	Issue	7	Pages	073043
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A multi-species Monte Carlo (MC) model, combined with an analytical surface model, has been developed in order to investigate the general plasma processes occurring during the sputter deposition of complex oxide films in a dual-magnetron sputter deposition system. The important plasma species, such as electrons, Ar+ ions, fast Ar atoms and sputtered metal atoms (i.e. Mg and Al atoms) are described with the so-called multi-species MC model, whereas the deposition of MgxAlyOz films is treated by an analytical surface model. Targetsubstrate distances for both magnetrons in the dual-magnetron setup are varied for the purpose of growing stoichiometric complex oxide thin films. The metal atoms are sputtered from pure metallic targets, whereas the oxygen flux is only directed toward the substrate and is high enough to obtain fully oxidized thin films but low enough to avoid target poisoning. The calculations correspond to typical experimental conditions applied to grow these complex oxide films. In this paper, some calculation results are shown, such as the densities of various plasma species, their fluxes toward the targets and substrate, the deposition rates, as well as the film stoichiometry. Moreover, some results of the combined model are compared with experimental observations. Note that this is the first complete model, which can be applied for large and complicated magnetron reactor geometries, such as dual-magnetron configurations. With this model, we are able to describe all important plasma species as well as the deposition process. It can also be used to predict film stoichiometries of complex oxide films on the substrate.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000307072500003	Publication Date	2012-07-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1367-2630;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.786	Times cited	2	Open Access
	Notes				Approved	Most recent IF: 3.786; 2012 IF: 4.063
	Call Number	UA @ lucian @ c:irua:100100			Serial	3111
Permanent link to this record



	Author	Aghaei, M.; Lindner, H.; Bogaerts, A.
	Title	Optimization of operating parameters for inductively coupled plasma mass spectrometry : a computational study			Type	A1 Journal article
	Year	2012	Publication	Spectrochimica acta: part B : atomic spectroscopy	Abbreviated Journal	Spectrochim Acta B
	Volume	76	Issue		Pages	56-64
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	An inductively coupled plasma, connected to a mass spectrometer interface, is computationally investigated. The effect of pressure behind the sampler, injector gas flow rate, auxiliary gas flow rate, and applied power is studied. There seems to be an optimum range of injector gas flow rate for each setup which guaranties the presence and also a proper length of the central channel in the torch. Moreover, our modeling results show that for any specific purpose, it is possible to control that either only the central gas flow passes through the sampler orifice or that it is accompanied by the auxiliary gas flow. It was also found that depending on geometry, the variation of outgoing gas flow rate is much less than the variation of the injector gas flow rate and this causes a slightly higher pressure inside the torch. The general effect of increasing the applied power is a rise in the plasma temperature, which results in a higher ionization in the coil region. However, the negative effect is reducing the length of the cool central channel which is important to transfer the sample substances to the sampler. Using a proper applied power can enhance the efficiency of the system. Indeed, by changing the gas path lines, the power can control which flow (i.e., only from injector gas or also from the auxiliary gas) goes to the sampler orifice. Finally, as also reported from experiments in literature, the pressure behind the sampler has no dramatic effect on the plasma characteristics.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000311008600008	Publication Date	2012-06-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0584-8547;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.241	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 3.241; 2012 IF: 3.141
	Call Number	UA @ lucian @ c:irua:101356			Serial	2488
Permanent link to this record



	Author	Wendelen, W.; Mueller, B.Y.; Autrique, D.; Rethfeld, B.; Bogaerts, A.
	Title	Space charge corrected electron emission from an aluminum surface under non-equilibrium conditions			Type	A1 Journal article
	Year	2012	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	111	Issue	11	Pages	113110
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A theoretical study has been conducted of ultrashort pulsed laser induced electron emission from an aluminum surface. Electron emission fluxes retrieved from the commonly employed Fowler-DuBridge theory were compared to fluxes based on a laser-induced non-equilibrium electron distribution. As a result, the two-and three-photon photoelectron emission parameters for the Fowler-DuBridge theory have been approximated. We observe that at regimes where photoemission is important, laser-induced electron emission evolves in a more smooth manner than predicted by the Fowler-DuBridge theory. The importance of the actual electron distribution decreases at higher laser fluences, whereas the contribution of thermionic emission increases. Furthermore, the influence of a space charge effect on electron emission was evaluated by a one dimensional particle-in-cell model. Depending on the fluences, the space charge reduces the electron emission by several orders of magnitude. The influence of the electron emission flux profiles on the effective electron emission was found to be negligible. However, a non-equilibrium electron velocity distribution increases the effective electron emission significantly. Our results show that it is essential to consider the non-equilibrium electron distribution as well as the space charge effect for the description of laser-induced photoemission. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4729071]
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000305401400043	Publication Date	2012-06-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	30	Open Access
	Notes				Approved	Most recent IF: 2.068; 2012 IF: 2.210
	Call Number	UA @ lucian @ c:irua:100300			Serial	3057
Permanent link to this record



	Author	Neyts, E.C.; Bogaerts, A.
	Title	Modeling the growth of SWNTs and graphene on the atomic scale			Type	A1 Journal article
	Year	2012	Publication	ECS transactions	Abbreviated Journal
	Volume	45	Issue	4	Pages	73-78
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The possibility of application of nanomaterials is determined by our ability to control the properties of the materials, which are ultimately determined by their structure and hence their growth processes. We employ hybrid molecular dynamics / Monte Carlo (MD/MC) simulations to explore the growth of SWNTs and graphene on nickel as a catalyst, with the specific goal of unraveling the growth mechanisms. While the general observations are in agreement with the literature, we find a number of interesting phenomena to be operative which are crucial for the growth, and which are not accessible by MD simulations alone due to the associated time scale. Specifically, we observe metal mediated healing and restructuring processes to take place, reorganizing the carbon network during the initial nucleation step. In the case of carbon nanotube growth, this leads to the growth of tubes with a determinable chirality. In the case of graphene formation, we find that graphene is only formed at temperatures above 700 K. These results are of importance for understanding the growth mechanisms of these carbon nanomaterials on the fundamental level.
	Address
	Corporate Author				Thesis
	Publisher	Electrochemical Society	Place of Publication	Pennington	Editor
	Language		Wos	000316890000008	Publication Date	2012-04-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1938-6737;1938-5862;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	2	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:108535			Serial	2144
Permanent link to this record



	Author	Teodoru, S.; Kusano, Y.; Bogaerts, A.
	Title	The effect of O₂ in a humid O₂/N₂/NO_x gas mixture on NO_x and N₂O remediation by an atmospheric pressure dielectric barrier discharge			Type	A1 Journal article
	Year	2012	Publication	Plasma processes and polymers	Abbreviated Journal	Plasma Process Polym
	Volume	9	Issue	7	Pages	652-689
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A numerical model for NxOy remediation in humid air plasma produced with a dielectric barrier discharge at atmospheric pressure is presented. Special emphasis is given to NO2 and N2O reduction with the decrease of O2 content in the feedstock gas. A detailed reaction mechanism including electronic and ionic processes, as well as the contribution of radicals and excited atomic/molecular species is proposed. The temporal evolution of the densities of NO, NO2 and N2O species, and some other by-products, is analyzed, and the major pathways for the NxOy remediation are discussed for one pulse. Subsequently, simulations are presented for a multi-pulses case, where three O2 contents are tested for optimization of the remediation process. It is found that when the gas mixture O2/N2/H2O/NOx has no initial O2 content, the best NOx and N2O remediation is achieved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000306279500005	Publication Date	2012-03-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1612-8850;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.846	Times cited	24	Open Access
	Notes				Approved	Most recent IF: 2.846; 2012 IF: 3.730
	Call Number	UA @ lucian @ c:irua:100920			Serial	842
Permanent link to this record



	Author	Zhao, S.-X.; Gao, F.; Wang, Y.-N.; Bogaerts, A.
	Title	The effect of F₂ attachment by low-energy electrons on the electron behaviour in an Ar/CF₄ inductively coupled plasma			Type	A1 Journal article
	Year	2012	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	21	Issue	2	Pages	025008-025008,13
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The electron behaviour in an Ar/CF4 inductively coupled plasma is investigated by a Langmuir probe and a hybrid model. The simulated and measured results include electron density, temperature and electron energy distribution function for different values of Ar/CF4 ratio, coil power and gas pressure. The hybrid plasma equipment model simulations show qualitative agreement with experiment. The effect of F2 electron attachment on the electron behaviour is explored by comparing two sets of data based on different F atom boundary conditions. It is demonstrated that electron attachment at F2 molecules is responsible for the depletion of low-energy electrons, causing a density decrease as well as a temperature increase when CF4 is added to an Ar plasma.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000302779400022	Publication Date	2012-03-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	23	Open Access
	Notes				Approved	Most recent IF: 3.302; 2012 IF: 2.515
	Call Number	UA @ lucian @ c:irua:96549			Serial	841
Permanent link to this record



	Author	Tinck, S.; Bogaerts, A.
	Title	Modeling SiH₄/O₂/Ar inductively coupled plasmas used for filling of microtrenches in shallow trench isolation (STI)			Type	A1 Journal article
	Year	2012	Publication	Plasma processes and polymers	Abbreviated Journal	Plasma Process Polym
	Volume	9	Issue	5	Pages	522-539
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Modeling results are presented to gain a better insight in the properties of a SiH4/O2/Ar inductively coupled plasma (ICP) and how it interacts with a silicon substrate (wafer), as applied in the microelectronics industry for the fabrication of electronic devices. The SiH4/O2/Ar ICP is used for the filling of microtrenches with isolating material (SiO2), as applied in shallow trench isolation (STI). In this article, a detailed reaction set that describes the plasma chemistry of SiH4/O2/Ar discharges as well as surface processes, such as sputtering, oxidation, and deposition, is presented. Results are presented on the plasma properties during the plasma enhanced chemical vapor deposition process (PECVD) for different gas ratios, as well as on the shape of the filled trenches and the surface compositions of the deposited layers. For the operating conditions under study it is found that the most important species accounting for deposition are SiH2, SiH3O, SiH3 and SiH2O, while SiH+2, SiH+3, O+2 and Ar+ are the dominant species for sputtering of the surface. By diluting the precursor gas (SiH4) in the mixture, the deposition rate versus sputtering rate can be controlled for a desired trench filling process. From the calculation results it is clear that a high deposition rate will result in undesired void formation during the trench filling, while a small deposition rate will result in undesired trench bottom and mask damage by sputtering. By varying the SiH4/O2 ratio, the chemical composition of the deposited layer will be influenced. However, even at the highest SiH4/O2 ratio investigated (i.e., 3.2:1; low oxygen content), the bulk deposited layer consists mainly of SiO2, suggesting that low-volatile silane species deposit first and subsequently become oxidized instead of being oxidized first in the plasma before deposition. Finally, it was found that the top surface of the deposited layer contained less oxygen due to preferential sputtering of O atoms, making the top layer more Si-rich. However, this effect is negligible at a SiH4/O2 ratio of 2:1 or lower.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000303858100010	Publication Date	2012-03-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1612-8850;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.846	Times cited	5	Open Access
	Notes				Approved	Most recent IF: 2.846; 2012 IF: 3.730
	Call Number	UA @ lucian @ c:irua:99127			Serial	2142
Permanent link to this record



	Author	Aghaei, M.; Lindner, H.; Bogaerts, A.
	Title	Effect of a mass spectrometer interface on inductively coupled plasma characteristics : a computational study			Type	A1 Journal article
	Year	2012	Publication	Journal of analytical atomic spectrometry	Abbreviated Journal	J Anal Atom Spectrom
	Volume	27	Issue	4	Pages	604-610
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	An inductively coupled plasma connected to a mass spectrometer interface (sampling cone) is computationally investigated. Typical plasma characteristics, such as gas flow velocity, plasma temperature and electron density, are calculated in two dimensions (cylindrical symmetry) and compared with and without a mass spectrometer sampling interface. The results obtained from our model compare favorably with experimental data reported in the literature. A dramatic increase in the plasma velocity is reported in the region close to the interface. Furthermore, a cooled metal interface lowers the plasma temperature and electron density on the axial channel very close to the sampling cone but the corresponding values in the off axial regions are increased. Therefore, the effect of the interface strongly depends on the measurement position. It is shown that even a small shift from the actual position of the sampler leads to a considerable change of the results.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000301496700005	Publication Date	2012-02-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0267-9477;1364-5544;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.379	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 3.379; 2012 IF: 3.155
	Call Number	UA @ lucian @ c:irua:97386			Serial	791
Permanent link to this record



	Author	Zhang, Y.-R.; Xu, X.; Bogaerts, A.; Wang, Y.-N.
	Title	Fluid simulation of the phase-shift effect in hydrogen capacitively coupled plasmas: 2 : radial uniformity of the plasma characteristics			Type	A1 Journal article
	Year	2012	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	45	Issue	1	Pages	015203-015203,13
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A two-dimensional fluid model, including the full set of Maxwell equations, has been developed and applied to investigate the effect of a phase shift between two power sources on the radial uniformity of several plasma characteristics in a hydrogen capacitively coupled plasma. This study was carried out at various frequencies in the range 13.56200 MHz. When the frequency is low, at 13.56 MHz, the plasma density is characterized by an off-axis peak when both power sources are in-phase (phgr = 0), and the best radial uniformity is obtained at phgr = π. This trend can be explained because the radial nonuniformity caused by the electrostatic edge effect can be effectively suppressed by the phase-shift effect at a phase difference equal to π. When the frequency rises to 60 MHz, the plasma density profiles shift smoothly from edge-peaked over uniform to centre-peaked as the phase difference increases, due to the pronounced standing-wave effect, and the best radial uniformity is reached at phgr = 0.3π. At a frequency of 100 MHz, a similar behaviour is observed, except that the maximum of the plasma density moves again towards the radial edge at the reverse-phase case (phgr = π), because of the dominant skin effect. When the frequency is 200 MHz, the bulk plasma density increases significantly with increasing phase-shift values, and a better uniformity is obtained at phgr = 0.4π. This is because the density in the centre increases faster than at the radial edge as the phase difference rises, due to the increasing power deposition Pz in the centre and the decreasing power density Pr at the radial edge. As the phase difference increases to π, the maximum near the radial edge becomes obvious again. This is because the skin effect has a predominant influence on the plasma density under this condition, resulting in a high density at the radial edge. Moreover, the axial ion flux increases monotonically with phase difference, and exhibits similar profiles to the plasma density. The calculation results illustrate that the radial uniformity of the various plasma characteristics is strongly dependent on the applied frequency and the phase shift between both power sources, which is important to realize, for controlling the uniformity of the plasma etch and deposition processes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000298290000012	Publication Date	2011-12-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 2.588; 2012 IF: 2.528
	Call Number	UA @ lucian @ c:irua:92852			Serial	1231
Permanent link to this record



	Author	Zhang, Y.-R.; Xu, X.; Bogaerts, A.; Wang, Y.-N.
	Title	Fluid simulation of the phase-shift effect in hydrogen capacitively coupled plasmas: 1 : transient behaviour of electrodynamics and power deposition			Type	A1 Journal article
	Year	2012	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	45	Issue	1	Pages	015202-015202,11
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A two-dimensional self-consistent fluid model coupled with the full set of Maxwell equations is established to investigate the phase-shift effect on the transient behaviour of electrodynamics and power deposition in a hydrogen capacitively coupled plasma. The effect has been examined at 13.56 MHz and 100 MHz, respectively, because of the different phase-shift modulation when the electromagnetic effects are dominant. The results indicate that the spatiotemporal distributions of the plasma characteristics obtained for various phase-shift cases are obviously different both in shape and especially in absolute values. Indeed, when the phase difference varies from 0 to π, there is an increase in the electron flux, thus the power deposition becomes more pronounced. At the frequency of 13.56 MHz, the axial electron flux in the bulk plasma becomes uniform along the z-axis, and the radial electron flux exhibits two peaks within one period at the reverse-phase case, whereas the oscillation is less pronounced at the in-phase case. Furthermore, in the very high frequency discharge, the radial electron flux is alternately positive and negative with four peaks during one period, and the ionization mainly occurs in the sheath region, due to the prominent power deposition there at a phase difference equal to π.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000298290000011	Publication Date	2011-12-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	57	Open Access
	Notes				Approved	Most recent IF: 2.588; 2012 IF: 2.528
	Call Number	UA @ lucian @ c:irua:92851			Serial	1230
Permanent link to this record



	Author	Neyts, E.C.; van Duin, A.C.T.; Bogaerts, A.
	Title	Insights in the plasma-assisted growth of carbon nanotubes through atomic scale simulations : effect of electric field			Type	A1 Journal article
	Year	2012	Publication	Journal of the American Chemical Society	Abbreviated Journal	J Am Chem Soc
	Volume	134	Issue	2	Pages	1256-1260
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Carbon nanotubes (CNTs) are nowadays routinely grown in a thermal CVD setup. State-of-the-art plasma-enhanced CVD (PECVD) growth, however, offers advantages over thermal CVD. A lower growth temperature and the growth of aligned freestanding single-walled CNTs (SWNTs) makes the technique very attractive. The atomic scale growth mechanisms of PECVD CNT growth, however, remain currently entirely unexplored. In this contribution, we employed molecular dynamics simulations to focus on the effect of applying an electric field on the SWNT growth process, as one of the effects coming into play in PECVD. Using sufficiently strong fields results in (a) alignment of the growing SWNTs, (b) a better ordering of the carbon network, and (c) a higher growth rate relative to thermal growth rate. We suggest that these effects are due to the small charge transfer occurring in the Ni/C system. These simulations constitute the first study of PECVD growth of SWNTs on the atomic level.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000301084300086	Publication Date	2011-11-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0002-7863;1520-5126;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.858	Times cited	56	Open Access
	Notes				Approved	Most recent IF: 13.858; 2012 IF: 10.677
	Call Number	UA @ lucian @ c:irua:97163			Serial	1673
Permanent link to this record



	Author	Neyts, E.; Mao, M.; Eckert, M.; Bogaerts, A.
	Title	Modeling aspects of plasma-enhanced chemical vapor deposition of carbon-based materials			Type	H1 Book chapter
	Year	2012	Publication		Abbreviated Journal
	Volume		Issue		Pages	245-290
	Keywords	H1 Book chapter; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	CRC Press	Place of Publication	Boca Raton, Fla	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN	978-1-4398-6676-4	Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:107843			Serial	2109
Permanent link to this record



	Author	Mao, M.; Wang, Y.N.; Bogaerts, A.
	Title	Numerical study of the plasma chemistry in inductively coupled SF₆ and SF₆/AR plasmas used for deep silicon etching applications			Type	A1 Journal article
	Year	2011	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	44	Issue	43	Pages	435202,1-435202,15
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A hybrid model, called the hybrid plasma equipment model, was used to study inductively coupled SF6 plasmas used for Si etching applications. The plasma properties such as number densities of electrons, positive and negative ions, and neutrals are calculated under typical etching conditions. The electron kinetics is analysed by means of the electron energy probability function. The plasma chemistry taking place in pure SF6 and in an Ar/SF6 mixture is also discussed, and finally the effect of the argon fraction on the plasma properties is investigated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000296591100004	Publication Date	2011-10-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	20	Open Access
	Notes				Approved	Most recent IF: 2.588; 2011 IF: 2.544
	Call Number	UA @ lucian @ c:irua:91754			Serial	2409
Permanent link to this record



	Author	Neyts, E.C.; van Duin, A.C.T.; Bogaerts, A.
	Title	Changing chirality during single-walled carbon nanotube growth : a reactive molecular dynamics/Monte Carlo study			Type	A1 Journal article
	Year	2011	Publication	Journal of the American Chemical Society	Abbreviated Journal	J Am Chem Soc
	Volume	133	Issue	43	Pages	17225-17231
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The growth mechanism and chirality formation of a single-walled carbon nanotube (SWNT) on a surface-bound nickel nanocluster are investigated by hybrid reactive molecular dynamics/force-biased Monte Carlo simulations. The validity of the interatomic potential used, the so-called ReaxFF potential, for simulating catalytic SWNT growth is demonstrated. The SWNT growth process was found to be in agreement with previous studies and observed to proceed through a number of distinct steps, viz., the dissolution of carbon in the metallic particle, the surface segregation of carbon with the formation of aggregated carbon clusters on the surface, the formation of graphitic islands that grow into SWNT caps, and finally continued growth of the SWNT. Moreover, it is clearly illustrated in the present study that during the growth process, the carbon network is continuously restructured by a metal-mediated process, thereby healing many topological defects. It is also found that a cap can nucleate and disappear again, which was not observed in previous simulations. Encapsulation of the nanoparticle is observed to be prevented by the carbon network migrating as a whole over the cluster surface. Finally, for the first time, the chirality of the growing SWNT cap is observed to change from (11,0) over (9,3) to (7,7). It is demonstrated that this change in chirality is due to the metal-mediated restructuring process.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000297380900026	Publication Date	2011-10-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0002-7863;1520-5126;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.858	Times cited	116	Open Access
	Notes				Approved	Most recent IF: 13.858; 2011 IF: 9.907
	Call Number	UA @ lucian @ c:irua:92043			Serial	309
Permanent link to this record



	Author	Lindner, H.; Murtazin, A.; Groh, S.; Niemax, K.; Bogaerts, A.
	Title	Simulation and experimental studies on plasma temperature, flow velocity, and injector diameter effects for an inductively coupled plasma			Type	A1 Journal article
	Year	2011	Publication	Analytical chemistry	Abbreviated Journal	Anal Chem
	Volume	83	Issue	24	Pages	9260-9266
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	An inductively coupled plasma (ICP) is analyzed by means of experiments and numerical simulation. Important plasma properties are analyzed, namely, the effective temperature inside the central channel and the mean flow velocity inside the plasma. Furthermore, the effect of torches with different injector diameters is studied by the model. The temperature inside the central channel is determined from the end-on collected line-to-background ratio in dependence of the injector gas flow rates. Within the limits of 3% deviation, the results of the simulation and the experiments are in good agreement in the range of flow rates relevant for the analysis of relatively large droplets, i.e., 50 μm. The deviation increases for higher gas flow rates but stays below 6% for all flow rates studied. The velocity of the gas inside the coil region was determined by side-on analyte emission measurements with single monodisperse droplet introduction and by the analysis of the injector gas path lines in the simulation. In the downstream region significantly higher velocities were found than in the upstream region in both the simulation and the experiment. The quantitative values show good agreement in the downstream region. In the upstream region, deviations were found in the absolute values which can be attributed to the flow conditions in that region and because the methods used for velocity determination are not fully consistent. Eddy structures are found in the simulated flow lines. These affect strongly the way taken by the path lines of the injector gas and they can explain the very long analytical signals found in the experiments at low flow rates. Simulations were performed for different injector diameters in order to find conditions where good analyte transport and optimum signals can be expected. The results clearly show the existence of a transition flow rate which marks the lower limit for effective analyte transport conditions through the plasma. A rule-of-thumb equation was extracted from the results from which the transition flow rate can be estimated for different injector diameters and different injector gas compositions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000297946900013	Publication Date	2011-07-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-2700;1520-6882;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.32	Times cited	34	Open Access
	Notes				Approved	Most recent IF: 6.32; 2011 IF: 5.856
	Call Number	UA @ lucian @ c:irua:94001			Serial	3009
Permanent link to this record



	Author	De Bie, C.; Verheyde, B.; Martens, T.; van Dijk, J.; Paulussen, S.; Bogaerts, A.
	Title	Fluid modeling of the conversion of methane into higher hydrocarbons in an atmospheric pressure dielectric barrier discharge			Type	A1 Journal article
	Year	2011	Publication	Plasma processes and polymers	Abbreviated Journal	Plasma Process Polym
	Volume	8	Issue	11	Pages	1033-1058
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A one-dimensional fluid model for a dielectric barrier discharge in methane, used as a chemical reactor for gas conversion, is developed. The model describes the gas phase chemistry governing the conversion process of methane to higher hydrocarbons. The spatially averaged densities of the various plasma species as a function of time are discussed. Besides, the conversion of methane and the yields of the reaction products as a function of the residence time in the reactor are shown and compared with experimental data. Higher hydrocarbons (C2Hy and C3Hy) and hydrogen gas are typically found to be important reaction products. Furthermore, the main underlying reaction pathways are determined.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000297745500005	Publication Date	2011-07-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1612-8850;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.846	Times cited	70	Open Access
	Notes				Approved	Most recent IF: 2.846; 2011 IF: 2.468
	Call Number	UA @ lucian @ c:irua:92443			Serial	1227
Permanent link to this record



	Author	Tinck, S.; Boullart, W.; Bogaerts, A.
	Title	Modeling Cl₂/O₂/Ar inductively coupled plasmas used for silicon etching : effects of SiO₂ chamber wall coating			Type	A1 Journal article
	Year	2011	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	20	Issue	4	Pages	045012-045012,19
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, simulations are performed to gain a better insight into the properties of a Cl2/Ar plasma, with and without O2, during plasma etching of Si. Both plasma and surface properties are calculated in a self-consistent manner. Special attention is paid to the behavior of etch products coming from the wafer or the walls, and how the chamber walls can affect the plasma and the resulting etch process. Two modeling cases are considered. In the first case, the reactor walls are defined as clean (Al2O3), whereas in the second case a SiO2 coating is introduced on the reactor walls before the etching process, so that oxygen will be sputtered from the walls and introduced into the plasma. For this reason, a detailed reaction set is presented for a Cl2/O2/Ar plasma containing etched species, as well as an extensive reaction set for surface processes, including physical and chemical sputtering, chemical etching and deposition processes. Density and flux profiles of various species are presented for a better understanding of the bulk plasma during the etching process. Detailed information is also given on the composition of the surfaces at various locations of the reactor, on the etch products in the plasma and on the surface loss probabilities of the plasma species at the walls, with different compositions. It is found that in the clean chamber, walls are mostly chlorinated (Al2Cl3), with a thin layer of etch products residing on the wall. In the coated chamber, an oxy-chloride layer is grown on the walls for a few nanometers during the etching process. The Cl atom wall loss probability is found to decrease significantly in the coated chamber, hence increasing the etch rate. SiCl2, SiCl4 and SiCl3 are found to be the main etch products in the plasma, with the fraction of SiCl2 being always slightly higher. The simulation results compare well with experimental data available from the literature.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000295829800014	Publication Date	2011-06-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	22	Open Access
	Notes				Approved	Most recent IF: 3.302; 2011 IF: 2.521
	Call Number	UA @ lucian @ c:irua:91045			Serial	2141
Permanent link to this record



	Author	Bultinck, E.; Bogaerts, A.
	Title	Characterization of an Ar/O₂ magnetron plasma by a multi-species Monte Carlo model			Type	A1 Journal article
	Year	2011	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	20	Issue	4	Pages	045013-045013,12
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A combined Monte Carlo (MC)/analytical surface model is developed to study the plasma processes occurring during the reactive sputter deposition of TiOx thin films. This model describes the important plasma species with a MC approach (i.e. electrons, Ar+ ions, {\rm O}_2
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000295829800015	Publication Date	2011-06-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	7	Open Access
	Notes				Approved	Most recent IF: 3.302; 2011 IF: 2.521
	Call Number	UA @ lucian @ c:irua:89732			Serial	316
Permanent link to this record



	Author	Lindner, H.; Bogaerts, A.
	Title	Multi-element model for the simulation of inductively coupled plasmas : effects of helium addition to the central gas stream			Type	A1 Journal article
	Year	2011	Publication	Spectrochimica acta: part B : atomic spectroscopy	Abbreviated Journal	Spectrochim Acta B
	Volume	66	Issue	6	Pages	421-431
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A model for an atmospheric pressure inductively coupled plasma (ICP) is developed which allows rather easy extension to a variable number of species and ionisation degrees. This encompasses an easy calculation of transport parameters for mixtures, ionisation and heat capacity. The ICP is modeled in an axisymmetric geometry, taking into account the gas streaming into a flowing ambient gas. A mixture of argon and helium is applied in the injector gas stream as it is often done in laser ablation ICP spectrometry. The results show a strong influence of the added helium on the center of the ICP, which is important for chemical analysis. The length of the central channel is significantly increased and the temperature inside is significantly higher than in the case of pure argon. This means that higher gas volume flow rates can be applied by addition of helium compared to the use of pure argon. This has the advantage that the gas velocity in the transport system towards the ICP can be increased, which allows shorter washout-times. Consequently, shorter measurement times can be achieved, e.g. for spatial mapping analyses in laser ablation ICP spectrometry. Furthermore, the higher temperature and the longer effective plasma length will increase the maximum size of droplets or particles injected into the ICP that are completely evaporated at the detection site. Thus, we expect an increase of the analytical performance of the ICP by helium addition to the injector gas.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000293488700003	Publication Date	2011-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0584-8547;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.241	Times cited	28	Open Access
	Notes				Approved	Most recent IF: 3.241; 2011 IF: 2.876
	Call Number	UA @ lucian @ c:irua:90190			Serial	2209
Permanent link to this record



	Author	Bogaerts, A.; Aghaei, M.; Autrique, D.; Lindner, H.; Chen, Z.; Wendelen, W.
	Title	Computer simulations of laser ablation, plume expansion and plasma formation			Type	H1 Book chapter
	Year	2011	Publication		Abbreviated Journal
	Volume		Issue		Pages	1-10
	Keywords	H1 Book chapter; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	Trans Tech	Place of Publication	Aedermannsdorf	Editor
	Language		Wos	000292658900001	Publication Date	2011-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1662-8985;	ISBN	978-3-03785-081-7	Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	8	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:88340			Serial	470
Permanent link to this record



	Author	Bogaerts, A.; Eckert, M.; Mao, M.; Neyts, E.
	Title	Computer modelling of the plasma chemistry and plasma-based growth mechanisms for nanostructured materials			Type	A1 Journal article
	Year	2011	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	44	Issue	17	Pages	174030-174030,16
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this review paper, an overview is given of different modelling efforts for plasmas used for the formation and growth of nanostructured materials. This includes both the plasma chemistry, providing information on the precursors for nanostructure formation, as well as the growth processes itself. We limit ourselves to carbon (and silicon) nanostructures. Examples of the plasma modelling comprise nanoparticle formation in silane and hydrocarbon plasmas, as well as the plasma chemistry giving rise to carbon nanostructure formation, such as (ultra)nanocrystalline diamond ((U)NCD) and carbon nanotubes (CNTs). The second part of the paper deals with the simulation of the (plasma-based) growth mechanisms of the same carbon nanostructures, i.e. (U)NCD and CNTs, both by mechanistic modelling and detailed atomistic simulations.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000289512700030	Publication Date	2011-04-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	25	Open Access
	Notes				Approved	Most recent IF: 2.588; 2011 IF: 2.544
	Call Number	UA @ lucian @ c:irua:88364			Serial	463
Permanent link to this record



	Author	Georgieva, V.; Voter, A.F.; Bogaerts, A.
	Title	Understanding the surface diffusion processes during magnetron sputter-deposition of complex oxide Mg-Al-O thin films			Type	A1 Journal article
	Year	2011	Publication	Crystal growth & design	Abbreviated Journal	Cryst Growth Des
	Volume	11	Issue	6	Pages	2553-2558
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	It is known that film structure may change dramatically with the extent of surface diffusion during the film growth process. In the present work, surface diffusion, induced thermally or activated by energetic impacts, is investigated theoretically under conditions appropriate for magnetron sputter-deposition of MgAlO thin films with varying stoichiometry. The distribution of surface diffusion energy barriers available to the system was determined for each stoichiometry, which allowed assessing in a qualitative way how much surface diffusion will take place on the time scale available between deposition events. The activation energy barriers increase with the Al concentration in the film, and therefore, the surface diffusion rates in the time frame of typical deposition rates drop, which can explain the decrease in crystallinity in the film structure and the transition to amorphous structure. The deposition process and the immediate surface diffusion enhanced by the energetic adatoms are simulated by means of a molecular dynamics model. The longer-time thermal surface diffusion and the energy landscape are studied by the temperature accelerated dynamics method, applied in an approximate way. The surface diffusion enhanced by the energetic impacts appears to be very important for the film structure in the low-temperature deposition regime.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000291074600068	Publication Date	2011-04-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1528-7483;1528-7505;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.055	Times cited	14	Open Access
	Notes				Approved	Most recent IF: 4.055; 2011 IF: 4.720
	Call Number	UA @ lucian @ c:irua:89566			Serial	3806
Permanent link to this record